diff options
Diffstat (limited to 'drivers/input/touchscreen/stmpe-ts.c')
| -rw-r--r-- | drivers/input/touchscreen/stmpe-ts.c | 96 |
1 files changed, 26 insertions, 70 deletions
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2a78e27b4495..af0fb38bcfdc 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -1,14 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * STMicroelectronics STMPE811 Touchscreen Driver * * (C) 2010 Luotao Fu <l.fu@pengutronix.de> * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #include <linux/kernel.h> @@ -19,6 +14,7 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/touchscreen.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/i2c.h> @@ -30,8 +26,6 @@ * with touchscreen controller */ #define STMPE_REG_INT_STA 0x0B -#define STMPE_REG_ADC_CTRL1 0x20 -#define STMPE_REG_ADC_CTRL2 0x21 #define STMPE_REG_TSC_CTRL 0x40 #define STMPE_REG_TSC_CFG 0x41 #define STMPE_REG_FIFO_TH 0x4A @@ -49,17 +43,6 @@ #define STMPE_IRQ_TOUCH_DET 0 -#define SAMPLE_TIME(x) ((x & 0xf) << 4) -#define MOD_12B(x) ((x & 0x1) << 3) -#define REF_SEL(x) ((x & 0x1) << 1) -#define ADC_FREQ(x) (x & 0x3) -#define AVE_CTRL(x) ((x & 0x3) << 6) -#define DET_DELAY(x) ((x & 0x7) << 3) -#define SETTLING(x) (x & 0x7) -#define FRACTION_Z(x) (x & 0x7) -#define I_DRIVE(x) (x & 0x1) -#define OP_MODE(x) ((x & 0x7) << 1) - #define STMPE_TS_NAME "stmpe-ts" #define XY_MASK 0xfff @@ -69,15 +52,7 @@ * @idev: registered input device * @work: a work item used to scan the device * @dev: a pointer back to the MFD cell struct device* - * @sample_time: ADC converstion time in number of clock. - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), - * recommended is 4. - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) - * @ref_sel: ADC reference source - * (0 -> internal reference, 1 -> external reference) - * @adc_freq: ADC Clock speed - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @prop: Touchscreen properties * @ave_ctrl: Sample average control * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) * @touch_det_delay: Touch detect interrupt delay @@ -99,10 +74,7 @@ struct stmpe_touch { struct input_dev *idev; struct delayed_work work; struct device *dev; - u8 sample_time; - u8 mod_12b; - u8 ref_sel; - u8 adc_freq; + struct touchscreen_properties prop; u8 ave_ctrl; u8 touch_det_delay; u8 settling; @@ -135,7 +107,7 @@ static void stmpe_work(struct work_struct *work) /* * touch_det sometimes get desasserted or just get stuck. This appears - * to be a silicon bug, We still have to clearify this with the + * to be a silicon bug, We still have to clarify this with the * manufacture. As a workaround We release the key anyway if the * touch_det keeps coming in after 4ms, while the FIFO contains no value * during the whole time. @@ -168,7 +140,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) /* * The FIFO sometimes just crashes and stops generating interrupts. This - * appears to be a silicon bug. We still have to clearify this with + * appears to be a silicon bug. We still have to clarify this with * the manufacture. As a workaround we disable the TSC while we are * collecting data and flush the FIFO after reading */ @@ -181,8 +153,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) y = ((data_set[1] & 0xf) << 8) | data_set[2]; z = data_set[3]; - input_report_abs(ts->idev, ABS_X, x); - input_report_abs(ts->idev, ABS_Y, y); + touchscreen_report_pos(ts->idev, &ts->prop, x, y, false); input_report_abs(ts->idev, ABS_PRESSURE, z); input_report_key(ts->idev, BTN_TOUCH, 1); input_sync(ts->idev); @@ -203,7 +174,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) static int stmpe_init_hw(struct stmpe_touch *ts) { int ret; - u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask; + u8 tsc_cfg, tsc_cfg_mask; struct stmpe *stmpe = ts->stmpe; struct device *dev = ts->dev; @@ -213,27 +184,17 @@ static int stmpe_init_hw(struct stmpe_touch *ts) return ret; } - adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) | - REF_SEL(ts->ref_sel); - adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff); - - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1, - adc_ctrl1_mask, adc_ctrl1); + ret = stmpe811_adc_common_init(stmpe); if (ret) { - dev_err(dev, "Could not setup ADC\n"); + stmpe_disable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC); return ret; } - ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2, - ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq)); - if (ret) { - dev_err(dev, "Could not setup ADC\n"); - return ret; - } - - tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) | - SETTLING(ts->settling); - tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff); + tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) | + STMPE_DET_DELAY(ts->touch_det_delay) | + STMPE_SETTLING(ts->settling); + tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) | + STMPE_SETTLING(0xff); ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg); if (ret) { @@ -242,14 +203,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z, - FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z)); + STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE, - I_DRIVE(0xff), I_DRIVE(ts->i_drive)); + STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive)); if (ret) { dev_err(dev, "Could not config touch\n"); return ret; @@ -263,7 +224,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts) } ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL, - OP_MODE(0xff), OP_MODE(OP_MOD_XYZ)); + STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ)); if (ret) { dev_err(dev, "Could not set mode\n"); return ret; @@ -303,13 +264,13 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, if (np) { if (!of_property_read_u32(np, "st,sample-time", &val)) - ts->sample_time = val; + ts->stmpe->sample_time = val; if (!of_property_read_u32(np, "st,mod-12b", &val)) - ts->mod_12b = val; + ts->stmpe->mod_12b = val; if (!of_property_read_u32(np, "st,ref-sel", &val)) - ts->ref_sel = val; + ts->stmpe->ref_sel = val; if (!of_property_read_u32(np, "st,adc-freq", &val)) - ts->adc_freq = val; + ts->stmpe->adc_freq = val; if (!of_property_read_u32(np, "st,ave-ctrl", &val)) ts->ave_ctrl = val; if (!of_property_read_u32(np, "st,touch-det-delay", &val)) @@ -378,6 +339,8 @@ static int stmpe_input_probe(struct platform_device *pdev) input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0); input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0); + touchscreen_parse_properties(idev, false, &ts->prop); + error = input_register_device(idev); if (error) { dev_err(&pdev->dev, "Could not register input device\n"); @@ -387,13 +350,11 @@ static int stmpe_input_probe(struct platform_device *pdev) return 0; } -static int stmpe_ts_remove(struct platform_device *pdev) +static void stmpe_ts_remove(struct platform_device *pdev) { struct stmpe_touch *ts = platform_get_drvdata(pdev); stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN); - - return 0; } static struct platform_driver stmpe_ts_driver = { @@ -405,12 +366,7 @@ static struct platform_driver stmpe_ts_driver = { }; module_platform_driver(stmpe_ts_driver); -static const struct of_device_id stmpe_ts_ids[] = { - { .compatible = "st,stmpe-ts", }, - { }, -}; -MODULE_DEVICE_TABLE(of, stmpe_ts_ids); - +MODULE_ALIAS("platform:stmpe-ts"); MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); MODULE_DESCRIPTION("STMPEXXX touchscreen driver"); MODULE_LICENSE("GPL"); |
