diff options
Diffstat (limited to 'drivers/input/touchscreen/zinitix.c')
| -rw-r--r-- | drivers/input/touchscreen/zinitix.c | 358 |
1 files changed, 272 insertions, 86 deletions
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index b8d901099378..716d6fa60f86 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -10,80 +10,91 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> /* Register Map */ -#define BT541_SWRESET_CMD 0x0000 -#define BT541_WAKEUP_CMD 0x0001 +#define ZINITIX_SWRESET_CMD 0x0000 +#define ZINITIX_WAKEUP_CMD 0x0001 -#define BT541_IDLE_CMD 0x0004 -#define BT541_SLEEP_CMD 0x0005 +#define ZINITIX_IDLE_CMD 0x0004 +#define ZINITIX_SLEEP_CMD 0x0005 -#define BT541_CLEAR_INT_STATUS_CMD 0x0003 -#define BT541_CALIBRATE_CMD 0x0006 -#define BT541_SAVE_STATUS_CMD 0x0007 -#define BT541_SAVE_CALIBRATION_CMD 0x0008 -#define BT541_RECALL_FACTORY_CMD 0x000f +#define ZINITIX_CLEAR_INT_STATUS_CMD 0x0003 +#define ZINITIX_CALIBRATE_CMD 0x0006 +#define ZINITIX_SAVE_STATUS_CMD 0x0007 +#define ZINITIX_SAVE_CALIBRATION_CMD 0x0008 +#define ZINITIX_RECALL_FACTORY_CMD 0x000f -#define BT541_THRESHOLD 0x0020 +#define ZINITIX_THRESHOLD 0x0020 -#define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F +#define ZINITIX_LARGE_PALM_REJECT_AREA_TH 0x003F -#define BT541_DEBUG_REG 0x0115 /* 0~7 */ +#define ZINITIX_DEBUG_REG 0x0115 /* 0~7 */ -#define BT541_TOUCH_MODE 0x0010 -#define BT541_CHIP_REVISION 0x0011 -#define BT541_FIRMWARE_VERSION 0x0012 +#define ZINITIX_TOUCH_MODE 0x0010 + +#define ZINITIX_CHIP_REVISION 0x0011 +#define ZINITIX_CHIP_BTX0X_MASK 0xF0F0 +#define ZINITIX_CHIP_BT4X2 0x4020 +#define ZINITIX_CHIP_BT4X3 0x4030 +#define ZINITIX_CHIP_BT4X4 0x4040 + +#define ZINITIX_FIRMWARE_VERSION 0x0012 #define ZINITIX_USB_DETECT 0x116 -#define BT541_MINOR_FW_VERSION 0x0121 +#define ZINITIX_MINOR_FW_VERSION 0x0121 -#define BT541_VENDOR_ID 0x001C -#define BT541_HW_ID 0x0014 +#define ZINITIX_VENDOR_ID 0x001C +#define ZINITIX_HW_ID 0x0014 -#define BT541_DATA_VERSION_REG 0x0013 -#define BT541_SUPPORTED_FINGER_NUM 0x0015 -#define BT541_EEPROM_INFO 0x0018 -#define BT541_INITIAL_TOUCH_MODE 0x0019 +#define ZINITIX_DATA_VERSION_REG 0x0013 +#define ZINITIX_SUPPORTED_FINGER_NUM 0x0015 +#define ZINITIX_EEPROM_INFO 0x0018 +#define ZINITIX_INITIAL_TOUCH_MODE 0x0019 -#define BT541_TOTAL_NUMBER_OF_X 0x0060 -#define BT541_TOTAL_NUMBER_OF_Y 0x0061 +#define ZINITIX_TOTAL_NUMBER_OF_X 0x0060 +#define ZINITIX_TOTAL_NUMBER_OF_Y 0x0061 -#define BT541_DELAY_RAW_FOR_HOST 0x007f +#define ZINITIX_DELAY_RAW_FOR_HOST 0x007f -#define BT541_BUTTON_SUPPORTED_NUM 0x00B0 -#define BT541_BUTTON_SENSITIVITY 0x00B2 -#define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8 +#define ZINITIX_BUTTON_SUPPORTED_NUM 0x00B0 +#define ZINITIX_BUTTON_SENSITIVITY 0x00B2 +#define ZINITIX_DUMMY_BUTTON_SENSITIVITY 0X00C8 -#define BT541_X_RESOLUTION 0x00C0 -#define BT541_Y_RESOLUTION 0x00C1 +#define ZINITIX_X_RESOLUTION 0x00C0 +#define ZINITIX_Y_RESOLUTION 0x00C1 -#define BT541_POINT_STATUS_REG 0x0080 -#define BT541_ICON_STATUS_REG 0x00AA +#define ZINITIX_POINT_STATUS_REG 0x0080 -#define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2) +#define ZINITIX_BT4X2_ICON_STATUS_REG 0x009A +#define ZINITIX_BT4X3_ICON_STATUS_REG 0x00A0 +#define ZINITIX_BT4X4_ICON_STATUS_REG 0x00A0 +#define ZINITIX_BT5XX_ICON_STATUS_REG 0x00AA -#define BT541_AFE_FREQUENCY 0x0100 -#define BT541_DND_N_COUNT 0x0122 -#define BT541_DND_U_COUNT 0x0135 +#define ZINITIX_POINT_COORD_REG (ZINITIX_POINT_STATUS_REG + 2) -#define BT541_RAWDATA_REG 0x0200 +#define ZINITIX_AFE_FREQUENCY 0x0100 +#define ZINITIX_DND_N_COUNT 0x0122 +#define ZINITIX_DND_U_COUNT 0x0135 -#define BT541_EEPROM_INFO_REG 0x0018 +#define ZINITIX_RAWDATA_REG 0x0200 -#define BT541_INT_ENABLE_FLAG 0x00f0 -#define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 +#define ZINITIX_EEPROM_INFO_REG 0x0018 -#define BT541_BTN_WIDTH 0x016d +#define ZINITIX_INT_ENABLE_FLAG 0x00f0 +#define ZINITIX_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 -#define BT541_CHECKSUM_RESULT 0x012c +#define ZINITIX_BTN_WIDTH 0x016d -#define BT541_INIT_FLASH 0x01d0 -#define BT541_WRITE_FLASH 0x01d1 -#define BT541_READ_FLASH 0x01d2 +#define ZINITIX_CHECKSUM_RESULT 0x012c + +#define ZINITIX_INIT_FLASH 0x01d0 +#define ZINITIX_WRITE_FLASH 0x01d1 +#define ZINITIX_READ_FLASH 0x01d2 #define ZINITIX_INTERNAL_FLAG_02 0x011e #define ZINITIX_INTERNAL_FLAG_03 0x011f @@ -119,6 +130,7 @@ #define DEFAULT_TOUCH_POINT_MODE 2 #define MAX_SUPPORTED_FINGER_NUM 5 +#define MAX_SUPPORTED_BUTTON_NUM 8 #define CHIP_ON_DELAY 15 // ms #define FIRMWARE_ON_DELAY 40 // ms @@ -135,7 +147,7 @@ struct point_coord { struct touch_event { __le16 status; - u8 finger_cnt; + u8 finger_mask; u8 time_stamp; struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM]; }; @@ -146,6 +158,13 @@ struct bt541_ts_data { struct touchscreen_properties prop; struct regulator_bulk_data supplies[2]; u32 zinitix_mode; + u32 keycodes[MAX_SUPPORTED_BUTTON_NUM]; + int num_keycodes; + bool have_versioninfo; + u16 chip_revision; + u16 firmware_version; + u16 regdata_version; + u16 icon_status_reg; }; static int zinitix_read_data(struct i2c_client *client, @@ -190,19 +209,74 @@ static int zinitix_write_cmd(struct i2c_client *client, u16 reg) return 0; } +static u16 zinitix_get_u16_reg(struct bt541_ts_data *bt541, u16 vreg) +{ + struct i2c_client *client = bt541->client; + int error; + __le16 val; + + error = zinitix_read_data(client, vreg, (void *)&val, 2); + if (error) + return U8_MAX; + + return le16_to_cpu(val); +} + static int zinitix_init_touch(struct bt541_ts_data *bt541) { struct i2c_client *client = bt541->client; int i; int error; + u16 int_flags; - error = zinitix_write_cmd(client, BT541_SWRESET_CMD); + error = zinitix_write_cmd(client, ZINITIX_SWRESET_CMD); if (error) { dev_err(&client->dev, "Failed to write reset command\n"); return error; } - error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0); + /* + * Read and cache the chip revision and firmware version the first time + * we get here. + */ + if (!bt541->have_versioninfo) { + bt541->chip_revision = zinitix_get_u16_reg(bt541, + ZINITIX_CHIP_REVISION); + bt541->firmware_version = zinitix_get_u16_reg(bt541, + ZINITIX_FIRMWARE_VERSION); + bt541->regdata_version = zinitix_get_u16_reg(bt541, + ZINITIX_DATA_VERSION_REG); + bt541->have_versioninfo = true; + + dev_dbg(&client->dev, + "chip revision %04x firmware version %04x regdata version %04x\n", + bt541->chip_revision, bt541->firmware_version, + bt541->regdata_version); + + /* + * Determine the "icon" status register which varies by the + * chip. + */ + switch (bt541->chip_revision & ZINITIX_CHIP_BTX0X_MASK) { + case ZINITIX_CHIP_BT4X2: + bt541->icon_status_reg = ZINITIX_BT4X2_ICON_STATUS_REG; + break; + + case ZINITIX_CHIP_BT4X3: + bt541->icon_status_reg = ZINITIX_BT4X3_ICON_STATUS_REG; + break; + + case ZINITIX_CHIP_BT4X4: + bt541->icon_status_reg = ZINITIX_BT4X4_ICON_STATUS_REG; + break; + + default: + bt541->icon_status_reg = ZINITIX_BT5XX_ICON_STATUS_REG; + break; + } + } + + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, 0x0); if (error) { dev_err(&client->dev, "Failed to reset interrupt enable flag\n"); @@ -210,40 +284,47 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) } /* initialize */ - error = zinitix_write_u16(client, BT541_X_RESOLUTION, + error = zinitix_write_u16(client, ZINITIX_X_RESOLUTION, bt541->prop.max_x); if (error) return error; - error = zinitix_write_u16(client, BT541_Y_RESOLUTION, + error = zinitix_write_u16(client, ZINITIX_Y_RESOLUTION, bt541->prop.max_y); if (error) return error; - error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM, + error = zinitix_write_u16(client, ZINITIX_SUPPORTED_FINGER_NUM, MAX_SUPPORTED_FINGER_NUM); if (error) return error; - error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE, + error = zinitix_write_u16(client, ZINITIX_BUTTON_SUPPORTED_NUM, + bt541->num_keycodes); + if (error) + return error; + + error = zinitix_write_u16(client, ZINITIX_INITIAL_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; - error = zinitix_write_u16(client, BT541_TOUCH_MODE, + error = zinitix_write_u16(client, ZINITIX_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; - error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, - BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | - BIT_UP); + int_flags = BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | BIT_UP; + if (bt541->num_keycodes) + int_flags |= BIT_ICON_EVENT; + + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, int_flags); if (error) return error; /* clear queue */ for (i = 0; i < 10; i++) { - zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD); + zinitix_write_cmd(client, ZINITIX_CLEAR_INT_STATUS_CMD); udelay(10); } @@ -252,16 +333,27 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) static int zinitix_init_regulators(struct bt541_ts_data *bt541) { - struct i2c_client *client = bt541->client; + struct device *dev = &bt541->client->dev; int error; - bt541->supplies[0].supply = "vdd"; - bt541->supplies[1].supply = "vddo"; - error = devm_regulator_bulk_get(&client->dev, + /* + * Some older device trees have erroneous names for the regulators, + * so check if "vddo" is present and in that case use these names. + * Else use the proper supply names on the component. + */ + if (of_property_present(dev->of_node, "vddo-supply")) { + bt541->supplies[0].supply = "vdd"; + bt541->supplies[1].supply = "vddo"; + } else { + /* Else use the proper supply names */ + bt541->supplies[0].supply = "vcca"; + bt541->supplies[1].supply = "vdd"; + } + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(bt541->supplies), bt541->supplies); if (error < 0) { - dev_err(&client->dev, "Failed to get regulators: %d\n", error); + dev_err(dev, "Failed to get regulators: %d\n", error); return error; } @@ -311,11 +403,41 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541) static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot, const struct point_coord *p) { + u16 x, y; + + if (unlikely(!(p->sub_status & + (SUB_BIT_UP | SUB_BIT_DOWN | SUB_BIT_MOVE)))) { + dev_dbg(&bt541->client->dev, "unknown finger event %#02x\n", + p->sub_status); + return; + } + + x = le16_to_cpu(p->x); + y = le16_to_cpu(p->y); + input_mt_slot(bt541->input_dev, slot); - input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true); - touchscreen_report_pos(bt541->input_dev, &bt541->prop, - le16_to_cpu(p->x), le16_to_cpu(p->y), true); - input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width); + if (input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, + !(p->sub_status & SUB_BIT_UP))) { + touchscreen_report_pos(bt541->input_dev, + &bt541->prop, x, y, true); + input_report_abs(bt541->input_dev, + ABS_MT_TOUCH_MAJOR, p->width); + dev_dbg(&bt541->client->dev, "finger %d %s (%u, %u)\n", + slot, p->sub_status & SUB_BIT_DOWN ? "down" : "move", + x, y); + } else { + dev_dbg(&bt541->client->dev, "finger %d up (%u, %u)\n", + slot, x, y); + } +} + +static void zinitix_report_keys(struct bt541_ts_data *bt541, u16 icon_events) +{ + int i; + + for (i = 0; i < bt541->num_keycodes; i++) + input_report_key(bt541->input_dev, + bt541->keycodes[i], icon_events & BIT(i)); } static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) @@ -323,28 +445,45 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) struct bt541_ts_data *bt541 = bt541_handler; struct i2c_client *client = bt541->client; struct touch_event touch_event; + unsigned long finger_mask; + __le16 icon_events; int error; int i; memset(&touch_event, 0, sizeof(struct touch_event)); - error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG, + error = zinitix_read_data(bt541->client, ZINITIX_POINT_STATUS_REG, &touch_event, sizeof(struct touch_event)); if (error) { dev_err(&client->dev, "Failed to read in touchpoint struct\n"); goto out; } - for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) - if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST) - zinitix_report_finger(bt541, i, - &touch_event.point_coord[i]); + if (le16_to_cpu(touch_event.status) & BIT_ICON_EVENT) { + error = zinitix_read_data(bt541->client, bt541->icon_status_reg, + &icon_events, sizeof(icon_events)); + if (error) { + dev_err(&client->dev, "Failed to read icon events\n"); + goto out; + } + + zinitix_report_keys(bt541, le16_to_cpu(icon_events)); + } + + finger_mask = touch_event.finger_mask; + for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) { + const struct point_coord *p = &touch_event.point_coord[i]; + + /* Only process contacts that are actually reported */ + if (p->sub_status & SUB_BIT_EXIST) + zinitix_report_finger(bt541, i, p); + } input_mt_sync_frame(bt541->input_dev); input_sync(bt541->input_dev); out: - zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + zinitix_write_cmd(bt541->client, ZINITIX_CLEAR_INT_STATUS_CMD); return IRQ_HANDLED; } @@ -416,6 +555,7 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541) { struct input_dev *input_dev; int error; + int i; input_dev = devm_input_allocate_device(&bt541->client->dev); if (!input_dev) { @@ -433,6 +573,14 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541) input_dev->open = zinitix_input_open; input_dev->close = zinitix_input_close; + if (bt541->num_keycodes) { + input_dev->keycode = bt541->keycodes; + input_dev->keycodemax = bt541->num_keycodes; + input_dev->keycodesize = sizeof(bt541->keycodes[0]); + for (i = 0; i < bt541->num_keycodes; i++) + input_set_capability(input_dev, EV_KEY, bt541->keycodes[i]); + } + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); @@ -488,6 +636,40 @@ static int zinitix_ts_probe(struct i2c_client *client) return error; } + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, zinitix_ts_irq_handler, + IRQF_ONESHOT | IRQF_NO_AUTOEN, + client->name, bt541); + if (error) { + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + return error; + } + + if (device_property_present(&client->dev, "linux,keycodes")) { + bt541->num_keycodes = device_property_count_u32(&client->dev, + "linux,keycodes"); + if (bt541->num_keycodes < 0) { + dev_err(&client->dev, "Failed to count keys (%d)\n", + bt541->num_keycodes); + return bt541->num_keycodes; + } else if (bt541->num_keycodes > ARRAY_SIZE(bt541->keycodes)) { + dev_err(&client->dev, "Too many keys defined (%d)\n", + bt541->num_keycodes); + return -EINVAL; + } + + error = device_property_read_u32_array(&client->dev, + "linux,keycodes", + bt541->keycodes, + bt541->num_keycodes); + if (error) { + dev_err(&client->dev, + "Unable to parse \"linux,keycodes\" property: %d\n", + error); + return error; + } + } + error = zinitix_init_input_dev(bt541); if (error) { dev_err(&client->dev, @@ -513,19 +695,10 @@ static int zinitix_ts_probe(struct i2c_client *client) return -EINVAL; } - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, zinitix_ts_irq_handler, - IRQF_ONESHOT | IRQF_NO_AUTOEN, - client->name, bt541); - if (error) { - dev_err(&client->dev, "Failed to request IRQ: %d\n", error); - return error; - } - return 0; } -static int __maybe_unused zinitix_suspend(struct device *dev) +static int zinitix_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bt541_ts_data *bt541 = i2c_get_clientdata(client); @@ -540,7 +713,7 @@ static int __maybe_unused zinitix_suspend(struct device *dev) return 0; } -static int __maybe_unused zinitix_resume(struct device *dev) +static int zinitix_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bt541_ts_data *bt541 = i2c_get_clientdata(client); @@ -556,21 +729,34 @@ static int __maybe_unused zinitix_resume(struct device *dev) return ret; } -static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume); #ifdef CONFIG_OF static const struct of_device_id zinitix_of_match[] = { + { .compatible = "zinitix,bt402" }, + { .compatible = "zinitix,bt403" }, + { .compatible = "zinitix,bt404" }, + { .compatible = "zinitix,bt412" }, + { .compatible = "zinitix,bt413" }, + { .compatible = "zinitix,bt431" }, + { .compatible = "zinitix,bt432" }, + { .compatible = "zinitix,bt531" }, + { .compatible = "zinitix,bt532" }, + { .compatible = "zinitix,bt538" }, { .compatible = "zinitix,bt541" }, + { .compatible = "zinitix,bt548" }, + { .compatible = "zinitix,bt554" }, + { .compatible = "zinitix,at100" }, { } }; MODULE_DEVICE_TABLE(of, zinitix_of_match); #endif static struct i2c_driver zinitix_ts_driver = { - .probe_new = zinitix_ts_probe, + .probe = zinitix_ts_probe, .driver = { .name = "Zinitix-TS", - .pm = &zinitix_pm_ops, + .pm = pm_sleep_ptr(&zinitix_pm_ops), .of_match_table = of_match_ptr(zinitix_of_match), }, }; |