diff options
Diffstat (limited to 'drivers/leds/Kconfig')
| -rw-r--r-- | drivers/leds/Kconfig | 100 |
1 files changed, 93 insertions, 7 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 05e6af88b88c..a104cbb0a001 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -179,6 +179,21 @@ config LEDS_CR0014114 To compile this driver as a module, choose M here: the module will be called leds-cr0014114. +config LEDS_CROS_EC + tristate "LED Support for ChromeOS EC" + depends on MFD_CROS_EC_DEV + depends on LEDS_CLASS_MULTICOLOR + select LEDS_TRIGGERS + default MFD_CROS_EC_DEV + help + This option enables support for LEDs managed by ChromeOS ECs. + All LEDs exposed by the EC are supported in multicolor mode. + A hardware trigger to switch back to the automatic behaviour is + provided. + + To compile this driver as a module, choose M here: the module + will be called leds-cros_ec. + config LEDS_EL15203000 tristate "LED Support for Crane EL15203000" depends on LEDS_CLASS @@ -202,6 +217,8 @@ config LEDS_TURRIS_OMNIA depends on I2C depends on MACH_ARMADA_38X || COMPILE_TEST depends on OF + depends on TURRIS_OMNIA_MCU + depends on TURRIS_OMNIA_MCU_GPIO select LEDS_TRIGGERS help This option enables basic support for the LEDs found on the front @@ -414,7 +431,7 @@ config LEDS_LP50XX module will be called leds-lp50xx. config LEDS_LP55XX_COMMON - tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" + tristate "Common Driver for TI/National LP5521/5523/55231/5562/5569/8501" depends on LEDS_CLASS depends on LEDS_CLASS_MULTICOLOR depends on OF @@ -422,8 +439,8 @@ config LEDS_LP55XX_COMMON select FW_LOADER select FW_LOADER_USER_HELPER help - This option supports common operations for LP5521/5523/55231/5562/8501 - devices. + This option supports common operations for LP5521/5523/55231/5562/5569/ + 8501 devices. config LEDS_LP5521 tristate "LED Support for N.S. LP5521 LED driver chip" @@ -456,6 +473,16 @@ config LEDS_LP5562 Driver provides direct control via LED class and interface for programming the engines. +config LEDS_LP5569 + tristate "LED Support for TI LP5569 LED driver chip" + depends on LEDS_CLASS && I2C + depends on LEDS_LP55XX_COMMON + help + If you say yes here you get support for TI LP5569 LED driver. + It is 9 channels chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + config LEDS_LP8501 tristate "LED Support for TI LP8501 LED driver chip" depends on LEDS_CLASS && I2C @@ -486,6 +513,18 @@ config LEDS_LP8860 on the LP8860 4 channel LED driver using the I2C communication bus. +config LEDS_LP8864 + tristate "LED support for the TI LP8864/LP8866 4/6 channel LED drivers" + depends on LEDS_CLASS && I2C && OF + select REGMAP_I2C + help + If you say yes here you get support for the TI LP8864-Q1, + LP8864S-Q1, LP8866-Q1, LP8866S-Q1 4/6 channel LED backlight + drivers with I2C interface. + + To compile this driver as a module, choose M here: the + module will be called leds-lp8864. + config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" depends on LEDS_CLASS && BROKEN @@ -555,6 +594,17 @@ config LEDS_PCA995X LED driver chips accessed via the I2C bus. Supported devices include PCA9955BTW, PCA9952TW and PCA9955TW. +config LEDS_QNAP_MCU + tristate "LED Support for QNAP MCU controllers" + depends on LEDS_CLASS + depends on MFD_QNAP_MCU + help + This option enables support for LEDs available on embedded + controllers used in QNAP NAS devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-leds. + config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" depends on LEDS_CLASS @@ -728,6 +778,14 @@ config LEDS_MAX77650 help LEDs driver for MAX77650 family of PMICs from Maxim Integrated. +config LEDS_MAX77705 + tristate "LED support for Maxim MAX77705 PMIC" + depends on MFD_MAX77705 + depends on LEDS_CLASS + depends on LEDS_CLASS_MULTICOLOR + help + LED driver for MAX77705 PMIC from Maxim Integrated. + config LEDS_MAX8997 tristate "LED support for MAX8997 PMIC" depends on LEDS_CLASS && MFD_MAX8997 @@ -790,6 +848,15 @@ config LEDS_SC27XX_BLTC This driver can also be built as a module. If so the module will be called leds-sc27xx-bltc. +config LEDS_UPBOARD + tristate "LED support for the UP board" + depends on LEDS_CLASS && MFD_UPBOARD_FPGA + help + This option enables support for the UP board LEDs. + + This driver can also be built as a module. If so the module will be + called leds-upboard. + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" config LEDS_BLINKM @@ -800,6 +867,14 @@ config LEDS_BLINKM This option enables support for the BlinkM RGB LED connected through I2C. Say Y to enable support for the BlinkM LED. +config LEDS_BLINKM_MULTICOLOR + bool "Enable multicolor support for BlinkM I2C RGB LED" + depends on LEDS_BLINKM + depends on LEDS_CLASS_MULTICOLOR=y || LEDS_CLASS_MULTICOLOR=LEDS_BLINKM + help + This option enables multicolor sysfs class support for BlinkM LED and + disables the older, separated sysfs interface + config LEDS_POWERNV tristate "LED support for PowerNV Platform" depends on LEDS_CLASS @@ -857,7 +932,8 @@ config LEDS_USER config LEDS_NIC78BX tristate "LED support for NI PXI NIC78bx devices" depends on LEDS_CLASS - depends on X86 && ACPI + depends on HAS_IOPORT + depends on X86 || COMPILE_TEST help This option enables support for the User1 and User2 LEDs on NI PXI NIC78bx devices. @@ -869,7 +945,6 @@ config LEDS_SPI_BYTE tristate "LED support for SPI LED controller with a single byte" depends on LEDS_CLASS depends on SPI - depends on OF help This option enables support for LED controller which use a single byte for controlling the brightness. Currently the following controller is @@ -899,6 +974,17 @@ config LEDS_LM36274 Say Y to enable the LM36274 LED driver for TI LMU devices. This supports the LED device LM36274. +config LEDS_ST1202 + tristate "LED Support for STMicroelectronics LED1202 I2C chips" + depends on LEDS_CLASS + depends on I2C + depends on OF + select LEDS_TRIGGERS + select LEDS_TRIGGER_PATTERN + help + Say Y to enable support for LEDs connected to LED1202 + LED driver chips accessed via the I2C bus. + config LEDS_TPS6105X tristate "LED support for TI TPS6105X" depends on LEDS_CLASS @@ -938,7 +1024,7 @@ source "drivers/leds/rgb/Kconfig" comment "LED Triggers" source "drivers/leds/trigger/Kconfig" -comment "Simple LED drivers" -source "drivers/leds/simple/Kconfig" +comment "Simatic LED drivers" +source "drivers/leds/simatic/Kconfig" endif # NEW_LEDS |