summaryrefslogtreecommitdiff
path: root/drivers/mailbox/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mailbox/Kconfig')
-rw-r--r--drivers/mailbox/Kconfig213
1 files changed, 199 insertions, 14 deletions
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 3eeb12e93e98..29f16f220384 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menuconfig MAILBOX
bool "Mailbox Hardware Support"
help
@@ -15,6 +16,56 @@ config ARM_MHU
The controller has 3 mailbox channels, the last of which can be
used in Secure mode only.
+config ARM_MHU_V2
+ tristate "ARM MHUv2 Mailbox"
+ depends on ARM_AMBA
+ help
+ Say Y here if you want to build the ARM MHUv2 controller driver,
+ which provides unidirectional mailboxes between processing elements.
+
+config ARM_MHU_V3
+ tristate "ARM MHUv3 Mailbox"
+ depends on ARM64 || COMPILE_TEST
+ depends on HAS_IOMEM || COMPILE_TEST
+ depends on OF
+ help
+ Say Y here if you want to build the ARM MHUv3 controller driver,
+ which provides unidirectional mailboxes between processing elements.
+
+ ARM MHUv3 controllers can implement a varying number of extensions
+ that provides different means of transports: supported extensions
+ will be discovered and possibly managed at probe-time.
+
+config AST2700_MBOX
+ tristate "ASPEED AST2700 IPC driver"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ Mailbox driver implementation for ASPEED AST27XX SoCs. This driver
+ can be used to send message between different processors in SoC.
+ The driver provides mailbox support for sending interrupts to the
+ clients. Say Y here if you want to build this driver.
+
+config CV1800_MBOX
+ tristate "cv1800 mailbox"
+ depends on ARCH_SOPHGO || COMPILE_TEST
+ help
+ Mailbox driver implementation for Sophgo CV18XX SoCs. This driver
+ can be used to send message between different processors in SoC. Any
+ processer can write data in a channel, and set co-responding register
+ to raise interrupt to notice another processor, and it is allowed to
+ send data to itself.
+
+config EXYNOS_MBOX
+ tristate "Exynos Mailbox"
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ help
+ Say Y here if you want to build the Samsung Exynos Mailbox controller
+ driver. The controller has 16 flag bits for hardware interrupt
+ generation and a shared register for passing mailbox messages.
+ When the controller is used by the ACPM interface the shared register
+ is ignored and the mailbox controller acts as a doorbell that raises
+ the interrupt to the ACPM firmware.
+
config IMX_MBOX
tristate "i.MX Mailbox"
depends on ARCH_MXC || COMPILE_TEST
@@ -41,26 +92,27 @@ config PL320_MBOX
Management Engine, primarily for cpufreq. Say Y here if you want
to use the PL320 IPCM support.
+config ARMADA_37XX_RWTM_MBOX
+ tristate "Armada 37xx rWTM BIU Mailbox"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ help
+ Mailbox implementation for communication with the the firmware
+ running on the Cortex-M3 rWTM secure processor of the Armada 37xx
+ SOC. Say Y here if you are building for such a device (for example
+ the Turris Mox router).
+
config OMAP2PLUS_MBOX
tristate "OMAP2+ Mailbox framework support"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
help
Mailbox implementation for OMAP family chips with hardware for
interprocessor communication involving DSP, IVA1.0 and IVA2 in
OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
want to use OMAP2+ Mailbox framework support.
-config OMAP_MBOX_KFIFO_SIZE
- int "Mailbox kfifo default buffer size (bytes)"
- depends on OMAP2PLUS_MBOX
- default 256
- help
- Specify the default size of mailbox's kfifo buffers (bytes).
- This can also be changed at runtime (via the mbox_kfifo_size
- module parameter).
-
config ROCKCHIP_MBOX
- bool "Rockchip Soc Intergrated Mailbox Support"
+ bool "Rockchip Soc Integrated Mailbox Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
help
This driver provides support for inter-processor communication
@@ -105,7 +157,8 @@ config STI_MBOX
config TI_MESSAGE_MANAGER
tristate "Texas Instruments Message Manager Driver"
- depends on ARCH_KEYSTONE || ARCH_K3
+ depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ default ARCH_K3
help
An implementation of Message Manager slave driver for Keystone
and K3 architecture SoCs from Texas Instruments. Message Manager
@@ -142,6 +195,32 @@ config MAILBOX_TEST
Test client to help with testing new Controller driver
implementations.
+config POLARFIRE_SOC_MAILBOX
+ tristate "PolarFire SoC (MPFS) Mailbox"
+ depends on HAS_IOMEM
+ depends on MFD_SYSCON
+ depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
+ help
+ This driver adds support for the PolarFire SoC (MPFS) mailbox controller.
+
+ To compile this driver as a module, choose M here. the
+ module will be called mailbox-mpfs.
+
+ If unsure, say N.
+
+config MCHP_SBI_IPC_MBOX
+ tristate "Microchip Inter-processor Communication (IPC) SBI driver"
+ depends on RISCV_SBI
+ depends on ARCH_MICROCHIP || COMPILE_TEST
+ help
+ Mailbox implementation for Microchip devices with an
+ Inter-process communication (IPC) controller.
+
+ To compile this driver as a module, choose M here. the
+ module will be called mailbox-mchp-ipc-sbi.
+
+ If unsure, say N.
+
config QCOM_APCS_IPC
tristate "Qualcomm APCS IPC driver"
depends on ARCH_QCOM || COMPILE_TEST
@@ -181,7 +260,7 @@ config BCM_FLEXRM_MBOX
tristate "Broadcom FlexRM Mailbox"
depends on ARM64
depends on ARCH_BCM_IPROC || COMPILE_TEST
- select GENERIC_MSI_IRQ_DOMAIN
+ select GENERIC_MSI_IRQ
default m if ARCH_BCM_IPROC
help
Mailbox implementation of the Broadcom FlexRM ring manager,
@@ -190,12 +269,21 @@ config BCM_FLEXRM_MBOX
config STM32_IPCC
tristate "STM32 IPCC Mailbox"
- depends on MACH_STM32MP157
+ depends on MACH_STM32MP157 || COMPILE_TEST
help
Mailbox implementation for STMicroelectonics STM32 family chips
with hardware for Inter-Processor Communication Controller (IPCC)
between processors. Say Y here if you want to have this support.
+config MTK_ADSP_MBOX
+ tristate "MediaTek ADSP Mailbox Controller"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ Say yes here to add support for "MediaTek ADSP Mailbox Controller.
+ This mailbox driver is used to send notification or short message
+ between processors with ADSP. It will place the message to share
+ buffer and will access the ipc control.
+
config MTK_CMDQ_MBOX
tristate "MediaTek CMDQ Mailbox Support"
depends on ARCH_MEDIATEK || COMPILE_TEST
@@ -205,4 +293,101 @@ config MTK_CMDQ_MBOX
mailbox driver. The CMDQ is used to help read/write registers with
critical time limitation, such as updating display configuration
during the vblank.
+
+config MTK_GPUEB_MBOX
+ tristate "MediaTek GPUEB Mailbox Support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ The MediaTek GPUEB mailbox is used to communicate with the embedded
+ controller in charge of GPU frequency and power management on some
+ MediaTek SoCs, such as the MT8196.
+ Say Y or m here if you want to support the MT8196 SoC in your kernel
+ build.
+
+config ZYNQMP_IPI_MBOX
+ tristate "Xilinx ZynqMP IPI Mailbox"
+ depends on ARCH_ZYNQMP && OF
+ help
+ Say yes here to add support for Xilinx IPI mailbox driver.
+ This mailbox driver is used to send notification or short message
+ between processors with Xilinx ZynqMP IPI. It will place the
+ message to the IPI buffer and will access the IPI control
+ registers to kick the other processor or enquire status.
+
+config SUN6I_MSGBOX
+ tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ default ARCH_SUNXI
+ help
+ Mailbox implementation for the hardware message box present in
+ various Allwinner SoCs. This mailbox is used for communication
+ between the application CPUs and the power management coprocessor.
+
+config SPRD_MBOX
+ tristate "Spreadtrum Mailbox"
+ depends on ARCH_SPRD || COMPILE_TEST
+ help
+ Mailbox driver implementation for the Spreadtrum platform. It is used
+ to send message between application processors and MCU. Say Y here if
+ you want to build the Spreatrum mailbox controller driver.
+
+config QCOM_CPUCP_MBOX
+ tristate "Qualcomm Technologies, Inc. CPUCP mailbox driver"
+ depends on (ARCH_QCOM || COMPILE_TEST) && 64BIT
+ help
+ Qualcomm Technologies, Inc. CPUSS Control Processor (CPUCP) mailbox
+ controller driver enables communication between AP and CPUCP. Say
+ Y here if you want to build this driver.
+
+config QCOM_IPCC
+ tristate "Qualcomm Technologies, Inc. IPCC driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ Qualcomm Technologies, Inc. Inter-Processor Communication Controller
+ (IPCC) driver for MSM devices. The driver provides mailbox support for
+ sending interrupts to the clients. On the other hand, the driver also
+ acts as an interrupt controller for receiving interrupts from clients.
+ Say Y here if you want to build this driver.
+
+config THEAD_TH1520_MBOX
+ tristate "T-head TH1520 Mailbox"
+ depends on ARCH_THEAD || COMPILE_TEST
+ help
+ Mailbox driver implementation for the Thead TH-1520 platform. Enables
+ two cores within the SoC to communicate and coordinate by passing
+ messages. Could be used to communicate between E910 core, on which the
+ kernel is running, and E902 core used for power management among other
+ things.
+
+config CIX_MBOX
+ tristate "CIX Mailbox"
+ depends on ARCH_CIX || COMPILE_TEST
+ depends on OF
+ help
+ Mailbox implementation for CIX IPC system. The controller supports
+ 11 mailbox channels with different operating mode and every channel
+ is unidirectional. Say Y here if you want to use the CIX Mailbox
+ support.
+
+config BCM74110_MAILBOX
+ tristate "Brcmstb BCM74110 Mailbox"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ default ARCH_BRCMSTB
+ help
+ Broadcom STB mailbox driver present starting with brcmstb bcm74110
+ SoCs. The mailbox is a communication channel between the host
+ processor and coprocessor that handles various power management task
+ and more.
+
+config RISCV_SBI_MPXY_MBOX
+ tristate "RISC-V SBI Message Proxy (MPXY) Mailbox"
+ depends on RISCV_SBI
+ default RISCV
+ help
+ Mailbox driver implementation for RISC-V SBI Message Proxy (MPXY)
+ extension. This mailbox driver is used to send messages to the
+ remote processor through the SBI implementation (M-mode firmware
+ or HS-mode hypervisor). Say Y here if you want to have this support.
+ If unsure say N.
+
endif