1 files changed, 83 insertions, 91 deletions

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 58f8395b56d6..f2e3c3e2d879 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1295,10 +1295,7 @@ again:
 			if (rrdev)
 				set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags);
 
-			if (conf->mddev->gendisk)
-				trace_block_bio_remap(bi,
-						disk_devt(conf->mddev->gendisk),
-						sh->dev[i].sector);
+			mddev_trace_remap(conf->mddev, bi, sh->dev[i].sector);
 			if (should_defer && op_is_write(op))
 				bio_list_add(&pending_bios, bi);
 			else
@@ -1342,10 +1339,7 @@ again:
 			 */
 			if (op == REQ_OP_DISCARD)
 				rbi->bi_vcnt = 0;
-			if (conf->mddev->gendisk)
-				trace_block_bio_remap(rbi,
-						disk_devt(conf->mddev->gendisk),
-						sh->dev[i].sector);
+			mddev_trace_remap(conf->mddev, rbi, sh->dev[i].sector);
 			if (should_defer && op_is_write(op))
 				bio_list_add(&pending_bios, rbi);
 			else
@@ -2422,12 +2416,12 @@ static int grow_stripes(struct r5conf *conf, int num)
 	size_t namelen = sizeof(conf->cache_name[0]);
 	int devs = max(conf->raid_disks, conf->previous_raid_disks);
 
-	if (conf->mddev->gendisk)
+	if (mddev_is_dm(conf->mddev))
 		snprintf(conf->cache_name[0], namelen,
-			"raid%d-%s", conf->level, mdname(conf->mddev));
+			"raid%d-%p", conf->level, conf->mddev);
 	else
 		snprintf(conf->cache_name[0], namelen,
-			"raid%d-%p", conf->level, conf->mddev);
+			"raid%d-%s", conf->level, mdname(conf->mddev));
 	snprintf(conf->cache_name[1], namelen, "%.27s-alt", conf->cache_name[0]);
 
 	conf->active_name = 0;
@@ -4201,10 +4195,9 @@ static int handle_stripe_dirtying(struct r5conf *conf,
 	set_bit(STRIPE_HANDLE, &sh->state);
 	if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_PREFER_RMW)) && rmw > 0) {
 		/* prefer read-modify-write, but need to get some data */
-		if (conf->mddev->queue)
-			blk_add_trace_msg(conf->mddev->queue,
-					  "raid5 rmw %llu %d",
-					  (unsigned long long)sh->sector, rmw);
+		mddev_add_trace_msg(conf->mddev, "raid5 rmw %llu %d",
+				sh->sector, rmw);
+
 		for (i = disks; i--; ) {
 			struct r5dev *dev = &sh->dev[i];
 			if (test_bit(R5_InJournal, &dev->flags) &&
@@ -4281,10 +4274,11 @@ static int handle_stripe_dirtying(struct r5conf *conf,
 					set_bit(STRIPE_DELAYED, &sh->state);
 			}
 		}
-		if (rcw && conf->mddev->queue)
-			blk_add_trace_msg(conf->mddev->queue, "raid5 rcw %llu %d %d %d",
-					  (unsigned long long)sh->sector,
-					  rcw, qread, test_bit(STRIPE_DELAYED, &sh->state));
+		if (rcw && !mddev_is_dm(conf->mddev))
+			blk_add_trace_msg(conf->mddev->gendisk->queue,
+				"raid5 rcw %llu %d %d %d",
+				(unsigned long long)sh->sector, rcw, qread,
+				test_bit(STRIPE_DELAYED, &sh->state));
 	}
 
 	if (rcw > disks && rmw > disks &&
@@ -5523,9 +5517,7 @@ static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
 		spin_unlock_irq(&conf->device_lock);
 	}
 
-	if (mddev->gendisk)
-		trace_block_bio_remap(align_bio, disk_devt(mddev->gendisk),
-				      raid_bio->bi_iter.bi_sector);
+	mddev_trace_remap(mddev, align_bio, raid_bio->bi_iter.bi_sector);
 	submit_bio_noacct(align_bio);
 	return 1;
 }
@@ -5694,8 +5686,8 @@ static void raid5_unplug(struct blk_plug_cb *blk_cb, bool from_schedule)
 	}
 	release_inactive_stripe_list(conf, cb->temp_inactive_list,
 				     NR_STRIPE_HASH_LOCKS);
-	if (mddev->queue)
-		trace_block_unplug(mddev->queue, cnt, !from_schedule);
+	if (!mddev_is_dm(mddev))
+		trace_block_unplug(mddev->gendisk->queue, cnt, !from_schedule);
 	kfree(cb);
 }
 
@@ -7098,7 +7090,7 @@ raid5_store_skip_copy(struct mddev *mddev, const char *page, size_t len)
 	if (!conf)
 		err = -ENODEV;
 	else if (new != conf->skip_copy) {
-		struct request_queue *q = mddev->queue;
+		struct request_queue *q = mddev->gendisk->queue;
 
 		conf->skip_copy = new;
 		if (new)
@@ -7700,10 +7692,65 @@ static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded
 	return 0;
 }
 
-static void raid5_set_io_opt(struct r5conf *conf)
+static int raid5_set_limits(struct mddev *mddev)
 {
-	blk_queue_io_opt(conf->mddev->queue, (conf->chunk_sectors << 9) *
-			 (conf->raid_disks - conf->max_degraded));
+	struct r5conf *conf = mddev->private;
+	struct queue_limits lim;
+	int data_disks, stripe;
+	struct md_rdev *rdev;
+
+	/*
+	 * The read-ahead size must cover two whole stripes, which is
+	 * 2 * (datadisks) * chunksize where 'n' is the number of raid devices.
+	 */
+	data_disks = conf->previous_raid_disks - conf->max_degraded;
+
+	/*
+	 * We can only discard a whole stripe. It doesn't make sense to
+	 * discard data disk but write parity disk
+	 */
+	stripe = roundup_pow_of_two(data_disks * (mddev->chunk_sectors << 9));
+
+	blk_set_stacking_limits(&lim);
+	lim.io_min = mddev->chunk_sectors << 9;
+	lim.io_opt = lim.io_min * (conf->raid_disks - conf->max_degraded);
+	lim.raid_partial_stripes_expensive = 1;
+	lim.discard_granularity = stripe;
+	lim.max_write_zeroes_sectors = 0;
+	mddev_stack_rdev_limits(mddev, &lim);
+	rdev_for_each(rdev, mddev)
+		queue_limits_stack_bdev(&lim, rdev->bdev, rdev->new_data_offset,
+				mddev->gendisk->disk_name);
+
+	/*
+	 * Zeroing is required for discard, otherwise data could be lost.
+	 *
+	 * Consider a scenario: discard a stripe (the stripe could be
+	 * inconsistent if discard_zeroes_data is 0); write one disk of the
+	 * stripe (the stripe could be inconsistent again depending on which
+	 * disks are used to calculate parity); the disk is broken; The stripe
+	 * data of this disk is lost.
+	 *
+	 * We only allow DISCARD if the sysadmin has confirmed that only safe
+	 * devices are in use by setting a module parameter.  A better idea
+	 * might be to turn DISCARD into WRITE_ZEROES requests, as that is
+	 * required to be safe.
+	 */
+	if (!devices_handle_discard_safely ||
+	    lim.max_discard_sectors < (stripe >> 9) ||
+	    lim.discard_granularity < stripe)
+		lim.max_hw_discard_sectors = 0;
+
+	/*
+	 * Requests require having a bitmap for each stripe.
+	 * Limit the max sectors based on this.
+	 */
+	lim.max_hw_sectors = RAID5_MAX_REQ_STRIPES << RAID5_STRIPE_SHIFT(conf);
+
+	/* No restrictions on the number of segments in the request */
+	lim.max_segments = USHRT_MAX;
+
+	return queue_limits_set(mddev->gendisk->queue, &lim);
 }
 
 static int raid5_run(struct mddev *mddev)
@@ -7716,6 +7763,7 @@ static int raid5_run(struct mddev *mddev)
 	int i;
 	long long min_offset_diff = 0;
 	int first = 1;
+	int ret = -EIO;
 
 	if (mddev->recovery_cp != MaxSector)
 		pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
@@ -7968,66 +8016,10 @@ static int raid5_run(struct mddev *mddev)
 			mdname(mddev));
 	md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
 
-	if (mddev->queue) {
-		int chunk_size;
-		/* read-ahead size must cover two whole stripes, which
-		 * is 2 * (datadisks) * chunksize where 'n' is the
-		 * number of raid devices
-		 */
-		int data_disks = conf->previous_raid_disks - conf->max_degraded;
-		int stripe = data_disks *
-			((mddev->chunk_sectors << 9) / PAGE_SIZE);
-
-		chunk_size = mddev->chunk_sectors << 9;
-		blk_queue_io_min(mddev->queue, chunk_size);
-		raid5_set_io_opt(conf);
-		mddev->queue->limits.raid_partial_stripes_expensive = 1;
-		/*
-		 * We can only discard a whole stripe. It doesn't make sense to
-		 * discard data disk but write parity disk
-		 */
-		stripe = stripe * PAGE_SIZE;
-		stripe = roundup_pow_of_two(stripe);
-		mddev->queue->limits.discard_granularity = stripe;
-
-		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
-
-		rdev_for_each(rdev, mddev) {
-			disk_stack_limits(mddev->gendisk, rdev->bdev,
-					  rdev->data_offset << 9);
-			disk_stack_limits(mddev->gendisk, rdev->bdev,
-					  rdev->new_data_offset << 9);
-		}
-
-		/*
-		 * zeroing is required, otherwise data
-		 * could be lost. Consider a scenario: discard a stripe
-		 * (the stripe could be inconsistent if
-		 * discard_zeroes_data is 0); write one disk of the
-		 * stripe (the stripe could be inconsistent again
-		 * depending on which disks are used to calculate
-		 * parity); the disk is broken; The stripe data of this
-		 * disk is lost.
-		 *
-		 * We only allow DISCARD if the sysadmin has confirmed that
-		 * only safe devices are in use by setting a module parameter.
-		 * A better idea might be to turn DISCARD into WRITE_ZEROES
-		 * requests, as that is required to be safe.
-		 */
-		if (!devices_handle_discard_safely ||
-		    mddev->queue->limits.max_discard_sectors < (stripe >> 9) ||
-		    mddev->queue->limits.discard_granularity < stripe)
-			blk_queue_max_discard_sectors(mddev->queue, 0);
-
-		/*
-		 * Requests require having a bitmap for each stripe.
-		 * Limit the max sectors based on this.
-		 */
-		blk_queue_max_hw_sectors(mddev->queue,
-			RAID5_MAX_REQ_STRIPES << RAID5_STRIPE_SHIFT(conf));
-
-		/* No restrictions on the number of segments in the request */
-		blk_queue_max_segments(mddev->queue, USHRT_MAX);
+	if (!mddev_is_dm(mddev)) {
+		ret = raid5_set_limits(mddev);
+		if (ret)
+			goto abort;
 	}
 
 	if (log_init(conf, journal_dev, raid5_has_ppl(conf)))
@@ -8040,7 +8032,7 @@ abort:
 	free_conf(conf);
 	mddev->private = NULL;
 	pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev));
-	return -EIO;
+	return ret;
 }
 
 static void raid5_free(struct mddev *mddev, void *priv)
@@ -8572,8 +8564,8 @@ static void end_reshape(struct r5conf *conf)
 		spin_unlock_irq(&conf->device_lock);
 		wake_up(&conf->wait_for_overlap);
 
-		if (conf->mddev->queue)
-			raid5_set_io_opt(conf);
+		mddev_update_io_opt(conf->mddev,
+			conf->raid_disks - conf->max_degraded);
 	}
 }