diff options
Diffstat (limited to 'drivers/media/pci/pluto2/pluto2.c')
| -rw-r--r-- | drivers/media/pci/pluto2/pluto2.c | 62 |
1 files changed, 23 insertions, 39 deletions
diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c index 493828500055..6ac9b9bd7435 100644 --- a/drivers/media/pci/pluto2/pluto2.c +++ b/drivers/media/pci/pluto2/pluto2.c @@ -1,26 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] * * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> * * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ - * by Dany Salman <salmandany@yahoo.fr> + * by Dany Salman <salmandany@yahoo.fr> * Copyright (c) 2004 TDF - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ #include <linux/i2c.h> @@ -33,12 +19,12 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> -#include "demux.h" -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_frontend.h" -#include "dvb_net.h" -#include "dvbdev.h" +#include <media/demux.h> +#include <media/dmxdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_frontend.h> +#include <media/dvb_net.h> +#include <media/dvbdev.h> #include "tda1004x.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -242,16 +228,16 @@ static void pluto_set_dma_addr(struct pluto *pluto) static int pluto_dma_map(struct pluto *pluto) { - pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + pluto->dma_addr = dma_map_single(&pluto->pdev->dev, pluto->dma_buf, + TS_DMA_BYTES, DMA_FROM_DEVICE); - return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr); + return dma_mapping_error(&pluto->pdev->dev, pluto->dma_addr); } static void pluto_dma_unmap(struct pluto *pluto) { - pci_unmap_single(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + dma_unmap_single(&pluto->pdev->dev, pluto->dma_addr, TS_DMA_BYTES, + DMA_FROM_DEVICE); } static int pluto_start_feed(struct dvb_demux_feed *f) @@ -290,8 +276,8 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) { /* synchronize the DMA transfer with the CPU * first so that we see updated contents. */ - pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + dma_sync_single_for_cpu(&pluto->pdev->dev, pluto->dma_addr, + TS_DMA_BYTES, DMA_FROM_DEVICE); /* Workaround for broken hardware: * [1] On startup NBPACKETS seems to contain an uninitialized value, @@ -324,8 +310,8 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) pluto_set_dma_addr(pluto); /* sync the buffer and give it back to the card */ - pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, - TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + dma_sync_single_for_device(&pluto->pdev->dev, pluto->dma_addr, + TS_DMA_BYTES, DMA_FROM_DEVICE); } static irqreturn_t pluto_irq(int irq, void *dev_id) @@ -401,7 +387,7 @@ static int pluto_hw_init(struct pluto *pluto) /* set automatic LED control by FPGA */ pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); - /* set data endianess */ + /* set data endianness */ #ifdef __LITTLE_ENDIAN pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); #else @@ -577,12 +563,12 @@ static int pluto_read_serial(struct pluto *pluto) for (j = 0; j < 32; j += 8) { if ((val & 0xff) == 0xff) goto out; - printk("%c", val & 0xff); + printk(KERN_CONT "%c", val & 0xff); val >>= 8; } } out: - printk("\n"); + printk(KERN_CONT "\n"); pci_iounmap(pdev, cis); return 0; @@ -609,7 +595,7 @@ static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* enable interrupts */ pci_write_config_dword(pdev, 0x6c, 0x8000); - ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret < 0) goto err_pci_disable_device; @@ -637,7 +623,7 @@ static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* i2c */ i2c_set_adapdata(&pluto->i2c_adap, pluto); - strcpy(pluto->i2c_adap.name, DRIVER_NAME); + strscpy(pluto->i2c_adap.name, DRIVER_NAME, sizeof(pluto->i2c_adap.name)); pluto->i2c_adap.owner = THIS_MODULE; pluto->i2c_adap.dev.parent = &pdev->dev; pluto->i2c_adap.algo_data = &pluto->i2c_bit; @@ -736,7 +722,6 @@ err_pci_release_regions: err_pci_disable_device: pci_disable_device(pdev); err_kfree: - pci_set_drvdata(pdev, NULL); kfree(pluto); goto out; } @@ -765,7 +750,6 @@ static void pluto2_remove(struct pci_dev *pdev) pci_iounmap(pdev, pluto->io_mem); pci_release_regions(pdev); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); kfree(pluto); } @@ -776,7 +760,7 @@ static void pluto2_remove(struct pci_dev *pdev) #define PCI_DEVICE_ID_PLUTO2 0x0001 #endif -static struct pci_device_id pluto2_id_table[] = { +static const struct pci_device_id pluto2_id_table[] = { { .vendor = PCI_VENDOR_ID_SCM, .device = PCI_DEVICE_ID_PLUTO2, |