diff options
Diffstat (limited to 'drivers/media/rc/Kconfig')
| -rw-r--r-- | drivers/media/rc/Kconfig | 516 |
1 files changed, 237 insertions, 279 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 8a216068a35a..0a8aeafdb7e0 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -1,8 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only menuconfig RC_CORE tristate "Remote Controller support" depends on INPUT - ---help--- + help Enable support for Remote Controllers on Linux. This is needed in order to support several video capture adapters, standalone IR receivers/transmitters, and RF receivers. @@ -14,16 +15,6 @@ menuconfig RC_CORE Say Y when you have a TV or an IR device. if RC_CORE -source "drivers/media/rc/keymaps/Kconfig" - -config LIRC - bool "LIRC user interface" - depends on RC_CORE - ---help--- - Enable this option to enable the Linux Infrared Remote - Control user interface (e.g. /dev/lirc*). This interface - passes raw IR to and from userspace, which is needed for - IR transmitting (aka "blasting") and for the lirc daemon. config BPF_LIRC_MODE2 bool "Support for eBPF programs attached to lirc devices" @@ -38,133 +29,127 @@ config BPF_LIRC_MODE2 These eBPF programs can be used to decode IR into scancodes, for IR protocols not supported by the kernel decoders. +config LIRC + bool "LIRC user interface" + help + Enable this option to enable the Linux Infrared Remote + Control user interface (e.g. /dev/lirc*). This interface + passes raw IR to and from userspace, which is needed for + IR transmitting (aka "blasting") and for the lirc daemon. + +source "drivers/media/rc/keymaps/Kconfig" + menuconfig RC_DECODERS bool "Remote controller decoders" - depends on RC_CORE if RC_DECODERS + +config IR_IMON_DECODER + tristate "Enable IR raw decoder for the iMON protocol" + help + Enable this option if you have iMON PAD or Antec Veris infrared + remote control and you would like to use it with a raw IR + receiver, or if you wish to use an encoder to transmit this IR. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + select BITREVERSE + + help + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + config IR_NEC_DECODER tristate "Enable IR raw decoder for the NEC protocol" - depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with NEC protocol, and if the IR is decoded in software config IR_RC5_DECODER tristate "Enable IR raw decoder for the RC-5 protocol" - depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with RC-5 protocol, and if the IR is decoded in software config IR_RC6_DECODER tristate "Enable IR raw decoder for the RC6 protocol" - depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the RC6 protocol, and you need software decoding support. -config IR_JVC_DECODER - tristate "Enable IR raw decoder for the JVC protocol" - depends on RC_CORE - select BITREVERSE - - ---help--- - Enable this option if you have an infrared remote control which - uses the JVC protocol, and you need software decoding support. - -config IR_SONY_DECODER - tristate "Enable IR raw decoder for the Sony protocol" - depends on RC_CORE - select BITREVERSE +config IR_RCMM_DECODER + tristate "Enable IR raw decoder for the RC-MM protocol" + help + Enable this option when you have IR with RC-MM protocol, and + you need the software decoder. The driver supports 12, + 24 and 32 bits RC-MM variants. You can enable or disable the + different modes using the following RC protocol keywords: + 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'. - ---help--- - Enable this option if you have an infrared remote control which - uses the Sony protocol, and you need software decoding support. + To compile this driver as a module, choose M here: the module + will be called ir-rcmm-decoder. config IR_SANYO_DECODER tristate "Enable IR raw decoder for the Sanyo protocol" - depends on RC_CORE + select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), and you need software decoding support. config IR_SHARP_DECODER tristate "Enable IR raw decoder for the Sharp protocol" - depends on RC_CORE + select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sharp protocol (Sharp, Denon), and you need software decoding support. -config IR_MCE_KBD_DECODER - tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" - depends on RC_CORE +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" select BITREVERSE - ---help--- - Enable this option if you have a Microsoft Remote Keyboard for - Windows Media Center Edition, which you would like to use with - a raw IR receiver in your system. + help + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. config IR_XMP_DECODER tristate "Enable IR raw decoder for the XMP protocol" - depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with XMP protocol, and if the IR is decoded in software -config IR_IMON_DECODER - tristate "Enable IR raw decoder for the iMON protocol" - depends on RC_CORE - ---help--- - Enable this option if you have iMON PAD or Antec Veris infrared - remote control and you would like to use it with a raw IR - receiver, or if you wish to use an encoder to transmit this IR. - endif #RC_DECODERS menuconfig RC_DEVICES bool "Remote Controller devices" - depends on RC_CORE if RC_DEVICES -config RC_ATI_REMOTE - tristate "ATI / X10 based USB RF remote controls" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - help - Say Y here if you want to use an X10 based USB remote control. - These are RF remotes with USB receivers. - - Such devices include the ATI remote that comes with many of ATI's - All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, - Medion RF remote, and SnapStream FireFly remote. - - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP || COMPILE_TEST - depends on RC_CORE - ---help--- + depends on HAS_IOPORT + help Say Y here to enable support for integrated infrared receiver /transceiver made by ENE. @@ -174,10 +159,42 @@ config IR_ENE To compile this driver as a module, choose M here: the module will be called ene_ir. +config IR_FINTEK + tristate "Fintek Consumer Infrared Transceiver" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receiver + /transceiver made by Fintek. This chip is found on assorted + Jetway motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called fintek-cir. + +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on (OF && GPIOLIB) || COMPILE_TEST + help + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + +config IR_GPIO_TX + tristate "GPIO IR Bit Banging Transmitter" + depends on LIRC + depends on (OF && GPIOLIB) || COMPILE_TEST + depends on !PREEMPT_RT + help + Say Y if you want to a GPIO based IR transmitter. This is a + bit banging driver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-tx. + config IR_HIX5HD2 tristate "Hisilicon hix5hd2 IR remote control" - depends on RC_CORE - depends on OF || COMPILE_TEST + depends on (OF && HAS_IOMEM) || COMPILE_TEST help Say Y here if you want to use hisilicon hix5hd2 remote control. To compile this driver as a module, choose M here: the module will be @@ -185,12 +202,37 @@ config IR_HIX5HD2 If you're not sure, select N here +config IR_IGORPLUGUSB + tristate "IgorPlug-USB IR Receiver" + depends on USB + help + Say Y here if you want to use the IgorPlug-USB IR Receiver by + Igor Cesko. This device is included on the Fit-PC2. + + Note that this device can only record bursts of 36 IR pulses and + spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. + + To compile this driver as a module, choose M here: the module will + be called igorplugusb. + +config IR_IGUANA + tristate "IguanaWorks USB IR Transceiver" + depends on USB + help + Say Y here if you want to use the IguanaWorks USB IR Transceiver. + Both infrared receive and send are supported. If you want to + change the ID or the pin config, use the user space driver from + IguanaWorks. + + Only firmware 0x0205 and later is supported. + + To compile this driver as a module, choose M here: the module will + be called iguanair. + config IR_IMON tristate "SoundGraph iMON Receiver and Display" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- + depends on USB + help Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) IR Receiver and/or LCD/VFD/VGA display. @@ -199,33 +241,19 @@ config IR_IMON config IR_IMON_RAW tristate "SoundGraph iMON Receiver (early raw IR models)" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- + depends on USB + help Say Y here if you want to use a SoundGraph iMON IR Receiver, early raw models. To compile this driver as a module, choose M here: the module will be called imon_raw. -config IR_MCEUSB - tristate "Windows Media Center Ed. eHome Infrared Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- - Say Y here if you want to use a Windows Media Center Edition - eHome Infrared Transceiver. - - To compile this driver as a module, choose M here: the - module will be called mceusb. - config IR_ITE_CIR tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST - depends on RC_CORE - ---help--- + depends on HAS_IOPORT + help Say Y here to enable support for integrated infrared receivers /transceivers made by ITE Tech Inc. These are found in several ASUS devices, like the ASUS Digimatrix or the ASUS @@ -234,34 +262,41 @@ config IR_ITE_CIR To compile this driver as a module, choose M here: the module will be called ite-cir. -config IR_FINTEK - tristate "Fintek Consumer Infrared Transceiver" - depends on PNP || COMPILE_TEST - depends on RC_CORE - ---help--- - Say Y here to enable support for integrated infrared receiver - /transciever made by Fintek. This chip is found on assorted - Jetway motherboards (and of course, possibly others). +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB + help + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. To compile this driver as a module, choose M here: the - module will be called fintek-cir. + module will be called mceusb. config IR_MESON tristate "Amlogic Meson IR remote receiver" - depends on RC_CORE depends on ARCH_MESON || COMPILE_TEST - ---help--- + select REGMAP_MMIO + help Say Y if you want to use the IR remote receiver available on Amlogic Meson SoCs. To compile this driver as a module, choose M here: the module will be called meson-ir. +config IR_MESON_TX + tristate "Amlogic Meson IR TX" + depends on ARCH_MESON || COMPILE_TEST + help + Say Y if you want to use the IR transmitter available on + Amlogic Meson SoCs. + + To compile this driver as a module, choose M here: the + module will be called meson-ir-tx. + config IR_MTK tristate "Mediatek IR remote receiver" - depends on RC_CORE depends on ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote receiver available on Mediatek SoCs. @@ -271,34 +306,61 @@ config IR_MTK config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST - depends on RC_CORE - ---help--- + depends on HAS_IOPORT + help Say Y here to enable support for integrated infrared receiver - /transciever made by Nuvoton (formerly Winbond). This chip is + /transceiver made by Nuvoton (formerly Winbond). This chip is found in the ASRock ION 330HT, as well as assorted Intel DP55-series motherboards (and of course, possibly others). To compile this driver as a module, choose M here: the module will be called nuvoton-cir. +config IR_PWM_TX + tristate "PWM IR transmitter" + depends on LIRC + depends on PWM + depends on HIGH_RES_TIMERS + depends on OF + help + Say Y if you want to use a PWM based IR transmitter. This is + more power efficient than the bit banging gpio driver. + + To compile this driver as a module, choose M here: the module will + be called pwm-ir-tx. + config IR_REDRAT3 tristate "RedRat3 IR Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE + depends on USB select NEW_LEDS select LEDS_CLASS - select USB - ---help--- + help Say Y here if you want to use a RedRat3 Infrared Transceiver. To compile this driver as a module, choose M here: the module will be called redrat3. +config IR_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on HAS_IOPORT + help + Say Y if you want to use Homebrew Serial Port Receivers and + Transceivers. + + To compile this driver as a module, choose M here: the module will + be called serial-ir. + +config IR_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + depends on IR_SERIAL + help + Serial Port Transmitter support + config IR_SPI tristate "SPI connected IR LED" depends on SPI && LIRC - depends on OF || COMPILE_TEST - ---help--- + depends on OF + help Say Y if you want to use an IR LED connected through SPI bus. To compile this driver as a module, choose M here: the module will be @@ -306,93 +368,81 @@ config IR_SPI config IR_STREAMZAP tristate "Streamzap PC Remote IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- + depends on USB + help Say Y here if you want to use a Streamzap PC Remote Infrared Receiver. To compile this driver as a module, choose M here: the module will be called streamzap. -config IR_WINBOND_CIR - tristate "Winbond IR remote control" - depends on (X86 && PNP) || COMPILE_TEST - depends on RC_CORE - select NEW_LEDS - select LEDS_CLASS - select BITREVERSE - ---help--- - Say Y here if you want to use the IR remote functionality found - in some Winbond SuperI/O chips. Currently only the WPCD376I - chip is supported (included in some Intel Media series - motherboards). - - To compile this driver as a module, choose M here: the module will - be called winbond_cir. - -config IR_IGORPLUGUSB - tristate "IgorPlug-USB IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- - Say Y here if you want to use the IgorPlug-USB IR Receiver by - Igor Cesko. This device is included on the Fit-PC2. - - Note that this device can only record bursts of 36 IR pulses and - spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. +config IR_SUNXI + tristate "SUNXI IR remote control" + depends on ARCH_SUNXI || COMPILE_TEST + help + Say Y if you want to use sunXi internal IR Controller To compile this driver as a module, choose M here: the module will - be called igorplugusb. - -config IR_IGUANA - tristate "IguanaWorks USB IR Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - ---help--- - Say Y here if you want to use the IguanaWorks USB IR Transceiver. - Both infrared receive and send are supported. If you want to - change the ID or the pin config, use the user space driver from - IguanaWorks. + be called sunxi-ir. - Only firmware 0x0205 and later is supported. +config IR_TOY + tristate "Infrared Toy and IR Droid" + depends on USB + help + Say Y here if you want to use the Infrared Toy or IR Droid, USB + versions. - To compile this driver as a module, choose M here: the module will - be called iguanair. + To compile this driver as a module, choose M here: the module will be + called ir_toy. config IR_TTUSBIR tristate "TechnoTrend USB IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB + depends on USB select NEW_LEDS select LEDS_CLASS - ---help--- + help Say Y here if you want to use the TechnoTrend USB IR Receiver. The driver can control the led. To compile this driver as a module, choose M here: the module will be called ttusbir. -config IR_RX51 - tristate "Nokia N900 IR transmitter diode" - depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE - ---help--- - Say Y or M here if you want to enable support for the IR - transmitter diode built in the Nokia N900 (RX51) device. +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on (X86 && PNP) || COMPILE_TEST + depends on HAS_IOPORT + select NEW_LEDS + select LEDS_CLASS + select BITREVERSE + help + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. - The driver uses omap DM timers for generating the carrier - wave and pulses. +config RC_ATI_REMOTE + tristate "ATI / X10 based USB RF remote controls" + depends on USB + help + Say Y here if you want to use an X10 based USB remote control. + These are RF remotes with USB receivers. -source "drivers/media/rc/img-ir/Kconfig" + Such devices include the ATI remote that comes with many of ATI's + All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, + Medion RF remote, and SnapStream FireFly remote. + + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. config RC_LOOPBACK tristate "Remote Control Loopback Driver" - depends on RC_CORE - ---help--- + help Say Y here if you want support for the remote control loopback driver which allows TX data to be sent back as RX data. This is mostly useful for debugging purposes. @@ -402,102 +452,19 @@ config RC_LOOPBACK To compile this driver as a module, choose M here: the module will be called rc_loopback. -config IR_GPIO_CIR - tristate "GPIO IR remote control" - depends on RC_CORE - depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- - Say Y if you want to use GPIO based IR Receiver. - - To compile this driver as a module, choose M here: the module will - be called gpio-ir-recv. - -config IR_GPIO_TX - tristate "GPIO IR Bit Banging Transmitter" - depends on RC_CORE - depends on LIRC - depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- - Say Y if you want to a GPIO based IR transmitter. This is a - bit banging driver. - - To compile this driver as a module, choose M here: the module will - be called gpio-ir-tx. - -config IR_PWM_TX - tristate "PWM IR transmitter" - depends on RC_CORE - depends on LIRC - depends on PWM - depends on OF || COMPILE_TEST - ---help--- - Say Y if you want to use a PWM based IR transmitter. This is - more power efficient than the bit banging gpio driver. - - To compile this driver as a module, choose M here: the module will - be called pwm-ir-tx. - config RC_ST tristate "ST remote control receiver" - depends on RC_CORE depends on ARCH_STI || COMPILE_TEST - ---help--- + help Say Y here if you want support for ST remote control driver which allows both IR and UHF RX. The driver passes raw pulse and space information to the LIRC decoder. If you're not sure, select N here. -config IR_SUNXI - tristate "SUNXI IR remote control" - depends on RC_CORE - depends on ARCH_SUNXI || COMPILE_TEST - ---help--- - Say Y if you want to use sunXi internal IR Controller - - To compile this driver as a module, choose M here: the module will - be called sunxi-ir. - -config IR_SERIAL - tristate "Homebrew Serial Port Receiver" - depends on RC_CORE - ---help--- - Say Y if you want to use Homebrew Serial Port Receivers and - Transceivers. - - To compile this driver as a module, choose M here: the module will - be called serial-ir. - -config IR_SERIAL_TRANSMITTER - bool "Serial Port Transmitter" - depends on IR_SERIAL - ---help--- - Serial Port Transmitter support - -config IR_SIR - tristate "Built-in SIR IrDA port" - depends on RC_CORE - ---help--- - Say Y if you want to use a IrDA SIR port Transceivers. - - To compile this driver as a module, choose M here: the module will - be called sir-ir. - -config IR_TANGO - tristate "Sigma Designs SMP86xx IR decoder" - depends on RC_CORE - depends on ARCH_TANGO || COMPILE_TEST - ---help--- - Adds support for the HW IR decoder embedded on Sigma Designs - Tango-based systems (SMP86xx, SMP87xx). - The HW decoder supports NEC, RC-5, RC-6 IR protocols. - When compiled as a module, look for tango-ir. - config RC_XBOX_DVD tristate "Xbox DVD Movie Playback Kit" - depends on RC_CORE - depends on USB_ARCH_HAS_HCD - select USB + depends on USB help Say Y here if you want to use the Xbox DVD Movie Playback Kit. These are IR remotes with USB receivers for the Original Xbox (2001). @@ -505,16 +472,7 @@ config RC_XBOX_DVD To compile this driver as a module, choose M here: the module will be called xbox_remote. -config IR_ZX - tristate "ZTE ZX IR remote control" - depends on RC_CORE - depends on ARCH_ZX || COMPILE_TEST - ---help--- - Say Y if you want to use the IR remote control available - on ZTE ZX family SoCs. - - To compile this driver as a module, choose M here: the - module will be called zx-irdec. +source "drivers/media/rc/img-ir/Kconfig" endif #RC_DEVICES |