diff options
Diffstat (limited to 'drivers/media/rc/Kconfig')
| -rw-r--r-- | drivers/media/rc/Kconfig | 474 |
1 files changed, 209 insertions, 265 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index c18dee648253..0a8aeafdb7e0 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -15,16 +15,6 @@ menuconfig RC_CORE Say Y when you have a TV or an IR device. if RC_CORE -source "drivers/media/rc/keymaps/Kconfig" - -config LIRC - bool "LIRC user interface" - depends on RC_CORE - help - Enable this option to enable the Linux Infrared Remote - Control user interface (e.g. /dev/lirc*). This interface - passes raw IR to and from userspace, which is needed for - IR transmitting (aka "blasting") and for the lirc daemon. config BPF_LIRC_MODE2 bool "Support for eBPF programs attached to lirc devices" @@ -39,14 +29,47 @@ config BPF_LIRC_MODE2 These eBPF programs can be used to decode IR into scancodes, for IR protocols not supported by the kernel decoders. +config LIRC + bool "LIRC user interface" + help + Enable this option to enable the Linux Infrared Remote + Control user interface (e.g. /dev/lirc*). This interface + passes raw IR to and from userspace, which is needed for + IR transmitting (aka "blasting") and for the lirc daemon. + +source "drivers/media/rc/keymaps/Kconfig" + menuconfig RC_DECODERS bool "Remote controller decoders" - depends on RC_CORE if RC_DECODERS + +config IR_IMON_DECODER + tristate "Enable IR raw decoder for the iMON protocol" + help + Enable this option if you have iMON PAD or Antec Veris infrared + remote control and you would like to use it with a raw IR + receiver, or if you wish to use an encoder to transmit this IR. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + select BITREVERSE + + help + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + select BITREVERSE + + help + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + config IR_NEC_DECODER tristate "Enable IR raw decoder for the NEC protocol" - depends on RC_CORE select BITREVERSE help @@ -55,7 +78,6 @@ config IR_NEC_DECODER config IR_RC5_DECODER tristate "Enable IR raw decoder for the RC-5 protocol" - depends on RC_CORE select BITREVERSE help @@ -64,34 +86,27 @@ config IR_RC5_DECODER config IR_RC6_DECODER tristate "Enable IR raw decoder for the RC6 protocol" - depends on RC_CORE select BITREVERSE help Enable this option if you have an infrared remote control which uses the RC6 protocol, and you need software decoding support. -config IR_JVC_DECODER - tristate "Enable IR raw decoder for the JVC protocol" - depends on RC_CORE - select BITREVERSE - +config IR_RCMM_DECODER + tristate "Enable IR raw decoder for the RC-MM protocol" help - Enable this option if you have an infrared remote control which - uses the JVC protocol, and you need software decoding support. - -config IR_SONY_DECODER - tristate "Enable IR raw decoder for the Sony protocol" - depends on RC_CORE - select BITREVERSE + Enable this option when you have IR with RC-MM protocol, and + you need the software decoder. The driver supports 12, + 24 and 32 bits RC-MM variants. You can enable or disable the + different modes using the following RC protocol keywords: + 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'. - help - Enable this option if you have an infrared remote control which - uses the Sony protocol, and you need software decoding support. + To compile this driver as a module, choose M here: the module + will be called ir-rcmm-decoder. config IR_SANYO_DECODER tristate "Enable IR raw decoder for the Sanyo protocol" - depends on RC_CORE + select BITREVERSE help Enable this option if you have an infrared remote control which @@ -100,84 +115,40 @@ config IR_SANYO_DECODER config IR_SHARP_DECODER tristate "Enable IR raw decoder for the Sharp protocol" - depends on RC_CORE + select BITREVERSE help Enable this option if you have an infrared remote control which uses the Sharp protocol (Sharp, Denon), and you need software decoding support. -config IR_MCE_KBD_DECODER - tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" - depends on RC_CORE +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" select BITREVERSE help - Enable this option if you have a Microsoft Remote Keyboard for - Windows Media Center Edition, which you would like to use with - a raw IR receiver in your system. + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. config IR_XMP_DECODER tristate "Enable IR raw decoder for the XMP protocol" - depends on RC_CORE select BITREVERSE help Enable this option if you have IR with XMP protocol, and if the IR is decoded in software -config IR_IMON_DECODER - tristate "Enable IR raw decoder for the iMON protocol" - depends on RC_CORE - help - Enable this option if you have iMON PAD or Antec Veris infrared - remote control and you would like to use it with a raw IR - receiver, or if you wish to use an encoder to transmit this IR. - -config IR_RCMM_DECODER - tristate "Enable IR raw decoder for the RC-MM protocol" - depends on RC_CORE - help - Enable this option when you have IR with RC-MM protocol, and - you need the software decoder. The driver supports 12, - 24 and 32 bits RC-MM variants. You can enable or disable the - different modes using the following RC protocol keywords: - 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'. - - To compile this driver as a module, choose M here: the module - will be called ir-rcmm-decoder. - endif #RC_DECODERS menuconfig RC_DEVICES bool "Remote Controller devices" - depends on RC_CORE if RC_DEVICES -config RC_ATI_REMOTE - tristate "ATI / X10 based USB RF remote controls" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - help - Say Y here if you want to use an X10 based USB remote control. - These are RF remotes with USB receivers. - - Such devices include the ATI remote that comes with many of ATI's - All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, - Medion RF remote, and SnapStream FireFly remote. - - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP || COMPILE_TEST - depends on RC_CORE + depends on HAS_IOPORT help Say Y here to enable support for integrated infrared receiver /transceiver made by ENE. @@ -188,10 +159,42 @@ config IR_ENE To compile this driver as a module, choose M here: the module will be called ene_ir. +config IR_FINTEK + tristate "Fintek Consumer Infrared Transceiver" + depends on PNP || COMPILE_TEST + depends on HAS_IOPORT + help + Say Y here to enable support for integrated infrared receiver + /transceiver made by Fintek. This chip is found on assorted + Jetway motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called fintek-cir. + +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on (OF && GPIOLIB) || COMPILE_TEST + help + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + +config IR_GPIO_TX + tristate "GPIO IR Bit Banging Transmitter" + depends on LIRC + depends on (OF && GPIOLIB) || COMPILE_TEST + depends on !PREEMPT_RT + help + Say Y if you want to a GPIO based IR transmitter. This is a + bit banging driver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-tx. + config IR_HIX5HD2 tristate "Hisilicon hix5hd2 IR remote control" - depends on RC_CORE - depends on OF || COMPILE_TEST + depends on (OF && HAS_IOMEM) || COMPILE_TEST help Say Y here if you want to use hisilicon hix5hd2 remote control. To compile this driver as a module, choose M here: the module will be @@ -199,11 +202,36 @@ config IR_HIX5HD2 If you're not sure, select N here +config IR_IGORPLUGUSB + tristate "IgorPlug-USB IR Receiver" + depends on USB + help + Say Y here if you want to use the IgorPlug-USB IR Receiver by + Igor Cesko. This device is included on the Fit-PC2. + + Note that this device can only record bursts of 36 IR pulses and + spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. + + To compile this driver as a module, choose M here: the module will + be called igorplugusb. + +config IR_IGUANA + tristate "IguanaWorks USB IR Transceiver" + depends on USB + help + Say Y here if you want to use the IguanaWorks USB IR Transceiver. + Both infrared receive and send are supported. If you want to + change the ID or the pin config, use the user space driver from + IguanaWorks. + + Only firmware 0x0205 and later is supported. + + To compile this driver as a module, choose M here: the module will + be called iguanair. + config IR_IMON tristate "SoundGraph iMON Receiver and Display" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB + depends on USB help Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) IR Receiver and/or LCD/VFD/VGA display. @@ -213,9 +241,7 @@ config IR_IMON config IR_IMON_RAW tristate "SoundGraph iMON Receiver (early raw IR models)" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB + depends on USB help Say Y here if you want to use a SoundGraph iMON IR Receiver, early raw models. @@ -223,22 +249,10 @@ config IR_IMON_RAW To compile this driver as a module, choose M here: the module will be called imon_raw. -config IR_MCEUSB - tristate "Windows Media Center Ed. eHome Infrared Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB - help - Say Y here if you want to use a Windows Media Center Edition - eHome Infrared Transceiver. - - To compile this driver as a module, choose M here: the - module will be called mceusb. - config IR_ITE_CIR tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST - depends on RC_CORE + depends on HAS_IOPORT help Say Y here to enable support for integrated infrared receivers /transceivers made by ITE Tech Inc. These are found in @@ -248,22 +262,20 @@ config IR_ITE_CIR To compile this driver as a module, choose M here: the module will be called ite-cir. -config IR_FINTEK - tristate "Fintek Consumer Infrared Transceiver" - depends on PNP || COMPILE_TEST - depends on RC_CORE +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB help - Say Y here to enable support for integrated infrared receiver - /transceiver made by Fintek. This chip is found on assorted - Jetway motherboards (and of course, possibly others). + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. To compile this driver as a module, choose M here: the - module will be called fintek-cir. + module will be called mceusb. config IR_MESON tristate "Amlogic Meson IR remote receiver" - depends on RC_CORE depends on ARCH_MESON || COMPILE_TEST + select REGMAP_MMIO help Say Y if you want to use the IR remote receiver available on Amlogic Meson SoCs. @@ -271,9 +283,18 @@ config IR_MESON To compile this driver as a module, choose M here: the module will be called meson-ir. +config IR_MESON_TX + tristate "Amlogic Meson IR TX" + depends on ARCH_MESON || COMPILE_TEST + help + Say Y if you want to use the IR transmitter available on + Amlogic Meson SoCs. + + To compile this driver as a module, choose M here: the + module will be called meson-ir-tx. + config IR_MTK tristate "Mediatek IR remote receiver" - depends on RC_CORE depends on ARCH_MEDIATEK || COMPILE_TEST help Say Y if you want to use the IR remote receiver available @@ -285,7 +306,7 @@ config IR_MTK config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST - depends on RC_CORE + depends on HAS_IOPORT help Say Y here to enable support for integrated infrared receiver /transceiver made by Nuvoton (formerly Winbond). This chip is @@ -295,23 +316,50 @@ config IR_NUVOTON To compile this driver as a module, choose M here: the module will be called nuvoton-cir. +config IR_PWM_TX + tristate "PWM IR transmitter" + depends on LIRC + depends on PWM + depends on HIGH_RES_TIMERS + depends on OF + help + Say Y if you want to use a PWM based IR transmitter. This is + more power efficient than the bit banging gpio driver. + + To compile this driver as a module, choose M here: the module will + be called pwm-ir-tx. + config IR_REDRAT3 tristate "RedRat3 IR Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE + depends on USB select NEW_LEDS select LEDS_CLASS - select USB help Say Y here if you want to use a RedRat3 Infrared Transceiver. To compile this driver as a module, choose M here: the module will be called redrat3. +config IR_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on HAS_IOPORT + help + Say Y if you want to use Homebrew Serial Port Receivers and + Transceivers. + + To compile this driver as a module, choose M here: the module will + be called serial-ir. + +config IR_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + depends on IR_SERIAL + help + Serial Port Transmitter support + config IR_SPI tristate "SPI connected IR LED" depends on SPI && LIRC - depends on OF || COMPILE_TEST + depends on OF help Say Y if you want to use an IR LED connected through SPI bus. @@ -320,9 +368,7 @@ config IR_SPI config IR_STREAMZAP tristate "Streamzap PC Remote IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB + depends on USB help Say Y here if you want to use a Streamzap PC Remote Infrared Receiver. @@ -330,58 +376,28 @@ config IR_STREAMZAP To compile this driver as a module, choose M here: the module will be called streamzap. -config IR_WINBOND_CIR - tristate "Winbond IR remote control" - depends on (X86 && PNP) || COMPILE_TEST - depends on RC_CORE - select NEW_LEDS - select LEDS_CLASS - select BITREVERSE - help - Say Y here if you want to use the IR remote functionality found - in some Winbond SuperI/O chips. Currently only the WPCD376I - chip is supported (included in some Intel Media series - motherboards). - - To compile this driver as a module, choose M here: the module will - be called winbond_cir. - -config IR_IGORPLUGUSB - tristate "IgorPlug-USB IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB +config IR_SUNXI + tristate "SUNXI IR remote control" + depends on ARCH_SUNXI || COMPILE_TEST help - Say Y here if you want to use the IgorPlug-USB IR Receiver by - Igor Cesko. This device is included on the Fit-PC2. - - Note that this device can only record bursts of 36 IR pulses and - spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. + Say Y if you want to use sunXi internal IR Controller To compile this driver as a module, choose M here: the module will - be called igorplugusb. + be called sunxi-ir. -config IR_IGUANA - tristate "IguanaWorks USB IR Transceiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB +config IR_TOY + tristate "Infrared Toy and IR Droid" + depends on USB help - Say Y here if you want to use the IguanaWorks USB IR Transceiver. - Both infrared receive and send are supported. If you want to - change the ID or the pin config, use the user space driver from - IguanaWorks. - - Only firmware 0x0205 and later is supported. + Say Y here if you want to use the Infrared Toy or IR Droid, USB + versions. - To compile this driver as a module, choose M here: the module will - be called iguanair. + To compile this driver as a module, choose M here: the module will be + called ir_toy. config IR_TTUSBIR tristate "TechnoTrend USB IR Receiver" - depends on USB_ARCH_HAS_HCD - depends on RC_CORE - select USB + depends on USB select NEW_LEDS select LEDS_CLASS help @@ -391,21 +407,41 @@ config IR_TTUSBIR To compile this driver as a module, choose M here: the module will be called ttusbir. -config IR_RX51 - tristate "Nokia N900 IR transmitter diode" - depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on (X86 && PNP) || COMPILE_TEST + depends on HAS_IOPORT + select NEW_LEDS + select LEDS_CLASS + select BITREVERSE + help + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. + +config RC_ATI_REMOTE + tristate "ATI / X10 based USB RF remote controls" + depends on USB help - Say Y or M here if you want to enable support for the IR - transmitter diode built in the Nokia N900 (RX51) device. + Say Y here if you want to use an X10 based USB remote control. + These are RF remotes with USB receivers. - The driver uses omap DM timers for generating the carrier - wave and pulses. + Such devices include the ATI remote that comes with many of ATI's + All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, + Medion RF remote, and SnapStream FireFly remote. -source "drivers/media/rc/img-ir/Kconfig" + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. config RC_LOOPBACK tristate "Remote Control Loopback Driver" - depends on RC_CORE help Say Y here if you want support for the remote control loopback driver which allows TX data to be sent back as RX data. @@ -416,44 +452,8 @@ config RC_LOOPBACK To compile this driver as a module, choose M here: the module will be called rc_loopback. -config IR_GPIO_CIR - tristate "GPIO IR remote control" - depends on RC_CORE - depends on (OF && GPIOLIB) || COMPILE_TEST - help - Say Y if you want to use GPIO based IR Receiver. - - To compile this driver as a module, choose M here: the module will - be called gpio-ir-recv. - -config IR_GPIO_TX - tristate "GPIO IR Bit Banging Transmitter" - depends on RC_CORE - depends on LIRC - depends on (OF && GPIOLIB) || COMPILE_TEST - help - Say Y if you want to a GPIO based IR transmitter. This is a - bit banging driver. - - To compile this driver as a module, choose M here: the module will - be called gpio-ir-tx. - -config IR_PWM_TX - tristate "PWM IR transmitter" - depends on RC_CORE - depends on LIRC - depends on PWM - depends on OF || COMPILE_TEST - help - Say Y if you want to use a PWM based IR transmitter. This is - more power efficient than the bit banging gpio driver. - - To compile this driver as a module, choose M here: the module will - be called pwm-ir-tx. - config RC_ST tristate "ST remote control receiver" - depends on RC_CORE depends on ARCH_STI || COMPILE_TEST help Say Y here if you want support for ST remote control driver @@ -462,56 +462,9 @@ config RC_ST If you're not sure, select N here. -config IR_SUNXI - tristate "SUNXI IR remote control" - depends on RC_CORE - depends on ARCH_SUNXI || COMPILE_TEST - help - Say Y if you want to use sunXi internal IR Controller - - To compile this driver as a module, choose M here: the module will - be called sunxi-ir. - -config IR_SERIAL - tristate "Homebrew Serial Port Receiver" - depends on RC_CORE - help - Say Y if you want to use Homebrew Serial Port Receivers and - Transceivers. - - To compile this driver as a module, choose M here: the module will - be called serial-ir. - -config IR_SERIAL_TRANSMITTER - bool "Serial Port Transmitter" - depends on IR_SERIAL - help - Serial Port Transmitter support - -config IR_SIR - tristate "Built-in SIR IrDA port" - depends on RC_CORE - help - Say Y if you want to use a IrDA SIR port Transceivers. - - To compile this driver as a module, choose M here: the module will - be called sir-ir. - -config IR_TANGO - tristate "Sigma Designs SMP86xx IR decoder" - depends on RC_CORE - depends on ARCH_TANGO || COMPILE_TEST - help - Adds support for the HW IR decoder embedded on Sigma Designs - Tango-based systems (SMP86xx, SMP87xx). - The HW decoder supports NEC, RC-5, RC-6 IR protocols. - When compiled as a module, look for tango-ir. - config RC_XBOX_DVD tristate "Xbox DVD Movie Playback Kit" - depends on RC_CORE - depends on USB_ARCH_HAS_HCD - select USB + depends on USB help Say Y here if you want to use the Xbox DVD Movie Playback Kit. These are IR remotes with USB receivers for the Original Xbox (2001). @@ -519,16 +472,7 @@ config RC_XBOX_DVD To compile this driver as a module, choose M here: the module will be called xbox_remote. -config IR_ZX - tristate "ZTE ZX IR remote control" - depends on RC_CORE - depends on ARCH_ZX || COMPILE_TEST - help - Say Y if you want to use the IR remote control available - on ZTE ZX family SoCs. - - To compile this driver as a module, choose M here: the - module will be called zx-irdec. +source "drivers/media/rc/img-ir/Kconfig" endif #RC_DEVICES |