diff options
Diffstat (limited to 'drivers/media/usb/uvc/uvc_video.c')
| -rw-r--r-- | drivers/media/usb/uvc/uvc_video.c | 710 |
1 files changed, 461 insertions, 249 deletions
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 8fa77a81dd7f..2094e059d7d3 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -6,17 +6,21 @@ * Laurent Pinchart (laurent.pinchart@ideasonboard.com) */ +#include <linux/dma-mapping.h> +#include <linux/highmem.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> #include <linux/atomic.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> +#include <media/jpeg.h> #include <media/v4l2-common.h> #include "uvcvideo.h" @@ -76,13 +80,35 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, if (likely(ret == size)) return 0; - uvc_printk(KERN_ERR, - "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n", - uvc_query_name(query), cs, unit, ret, size); + /* + * Some devices return shorter USB control packets than expected if the + * returned value can fit in less bytes. Zero all the bytes that the + * device has not written. + * + * This quirk is applied to all controls, regardless of their data type. + * Most controls are little-endian integers, in which case the missing + * bytes become 0 MSBs. For other data types, a different heuristic + * could be implemented if a device is found needing it. + * + * We exclude UVC_GET_INFO from the quirk. UVC_GET_LEN does not need + * to be excluded because its size is always 1. + */ + if (ret > 0 && query != UVC_GET_INFO) { + memset(data + ret, 0, size - ret); + dev_warn_once(&dev->intf->dev, + "UVC non compliance: %s control %u on unit %u returned %d bytes when we expected %u.\n", + uvc_query_name(query), cs, unit, ret, size); + return 0; + } - if (ret != -EPIPE) - return ret; + if (ret != -EPIPE) { + dev_err(&dev->intf->dev, + "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n", + uvc_query_name(query), cs, unit, ret, size); + return ret < 0 ? ret : -EPIPE; + } + /* Reuse data[0] to request the error code. */ tmp = *(u8 *)data; ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum, @@ -92,10 +118,14 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, error = *(u8 *)data; *(u8 *)data = tmp; - if (ret != 1) + if (ret != 1) { + dev_err_ratelimited(&dev->intf->dev, + "Failed to query (%s) UVC error code control %u on unit %u: %d (exp. 1).\n", + uvc_query_name(query), cs, unit, ret); return ret < 0 ? ret : -EPIPE; + } - uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error); + uvc_dbg(dev, CONTROL, "Control error %u\n", error); switch (error) { case 0: @@ -104,7 +134,7 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, case 1: /* Not ready */ return -EBUSY; case 2: /* Wrong state */ - return -EILSEQ; + return -EACCES; case 3: /* Power */ return -EREMOTE; case 4: /* Out of range */ @@ -112,6 +142,11 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, case 5: /* Invalid unit */ case 6: /* Invalid control */ case 7: /* Invalid Request */ + /* + * The firmware has not properly implemented + * the control or there has been a HW error. + */ + return -EIO; case 8: /* Invalid value within range */ return -EINVAL; default: /* reserved or unknown */ @@ -121,16 +156,44 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit, return -EPIPE; } +static const struct usb_device_id elgato_cam_link_4k = { + USB_DEVICE(0x0fd9, 0x0066) +}; + static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, struct uvc_streaming_control *ctrl) { - struct uvc_format *format = NULL; - struct uvc_frame *frame = NULL; + const struct uvc_format *format = NULL; + const struct uvc_frame *frame = NULL; unsigned int i; + /* + * The response of the Elgato Cam Link 4K is incorrect: The second byte + * contains bFormatIndex (instead of being the second byte of bmHint). + * The first byte is always zero. The third byte is always 1. + * + * The UVC 1.5 class specification defines the first five bits in the + * bmHint bitfield. The remaining bits are reserved and should be zero. + * Therefore a valid bmHint will be less than 32. + * + * Latest Elgato Cam Link 4K firmware as of 2021-03-23 needs this fix. + * MCU: 20.02.19, FPGA: 67 + */ + if (usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k) && + ctrl->bmHint > 255) { + u8 corrected_format_index = ctrl->bmHint >> 8; + + uvc_dbg(stream->dev, VIDEO, + "Correct USB video probe response from {bmHint: 0x%04x, bFormatIndex: %u} to {bmHint: 0x%04x, bFormatIndex: %u}\n", + ctrl->bmHint, ctrl->bFormatIndex, + 1, corrected_format_index); + ctrl->bmHint = 1; + ctrl->bFormatIndex = corrected_format_index; + } + for (i = 0; i < stream->nformats; ++i) { - if (stream->format[i].index == ctrl->bFormatIndex) { - format = &stream->format[i]; + if (stream->formats[i].index == ctrl->bFormatIndex) { + format = &stream->formats[i]; break; } } @@ -139,8 +202,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, return; for (i = 0; i < format->nframes; ++i) { - if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) { - frame = &format->frame[i]; + if (format->frames[i].bFrameIndex == ctrl->bFrameIndex) { + frame = &format->frames[i]; break; } } @@ -154,7 +217,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxVideoFrameSize = frame->dwMaxVideoFrameBufferSize; - /* The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to + /* + * The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to * compute the bandwidth on 16 bits and erroneously sign-extend it to * 32 bits, resulting in a huge bandwidth value. Detect and fix that * condition by setting the 16 MSBs to 0 when they're all equal to 1. @@ -172,20 +236,22 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ? ctrl->dwFrameInterval : frame->dwFrameInterval[0]; - /* Compute a bandwidth estimation by multiplying the frame + /* + * Compute a bandwidth estimation by multiplying the frame * size by the number of video frames per second, divide the * result by the number of USB frames (or micro-frames for - * high-speed devices) per second and add the UVC header size - * (assumed to be 12 bytes long). + * high- and super-speed devices) per second and add the UVC + * header size (assumed to be 12 bytes long). */ bandwidth = frame->wWidth * frame->wHeight / 8 * format->bpp; bandwidth *= 10000000 / interval + 1; bandwidth /= 1000; - if (stream->dev->udev->speed == USB_SPEED_HIGH) + if (stream->dev->udev->speed >= USB_SPEED_HIGH) bandwidth /= 8; bandwidth += 12; - /* The bandwidth estimate is too low for many cameras. Don't use + /* + * The bandwidth estimate is too low for many cameras. Don't use * maximum packet sizes lower than 1024 bytes to try and work * around the problem. According to measurements done on two * different camera models, the value is high enough to get most @@ -196,6 +262,15 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxPayloadTransferSize = bandwidth; } + + if (stream->intf->num_altsetting > 1 && + ctrl->dwMaxPayloadTransferSize > stream->maxpsize) { + dev_warn_ratelimited(&stream->intf->dev, + "UVC non compliance: Reducing max payload transfer size (%u) to fit endpoint limit (%u).\n", + ctrl->dwMaxPayloadTransferSize, + stream->maxpsize); + ctrl->dwMaxPayloadTransferSize = stream->maxpsize; + } } static size_t uvc_video_ctrl_size(struct uvc_streaming *stream) @@ -232,7 +307,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, size, uvc_timeout_param); if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) { - /* Some cameras, mostly based on Bison Electronics chipsets, + /* + * Some cameras, mostly based on Bison Electronics chipsets, * answer a GET_MIN or GET_MAX request with the wCompQuality * field only. */ @@ -244,7 +320,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, ret = 0; goto out; } else if (query == UVC_GET_DEF && probe == 1 && ret != size) { - /* Many cameras don't support the GET_DEF request on their + /* + * Many cameras don't support the GET_DEF request on their * video probe control. Warn once and return, the caller will * fall back to GET_CUR. */ @@ -254,10 +331,11 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, ret = -EIO; goto out; } else if (ret != size) { - uvc_printk(KERN_ERR, "Failed to query (%u) UVC %s control : " - "%d (exp. %u).\n", query, probe ? "probe" : "commit", + dev_err(&stream->intf->dev, + "Failed to query (%s) UVC %s control : %d (exp. %u).\n", + uvc_query_name(query), probe ? "probe" : "commit", ret, size); - ret = -EIO; + ret = (ret == -EPROTO) ? -EPROTO : -EIO; goto out; } @@ -287,7 +365,8 @@ static int uvc_get_video_ctrl(struct uvc_streaming *stream, ctrl->bMaxVersion = 0; } - /* Some broken devices return null or wrong dwMaxVideoFrameSize and + /* + * Some broken devices return null or wrong dwMaxVideoFrameSize and * dwMaxPayloadTransferSize fields. Try to get the value from the * format and frame descriptors. */ @@ -334,9 +413,9 @@ static int uvc_set_video_ctrl(struct uvc_streaming *stream, probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data, size, uvc_timeout_param); if (ret != size) { - uvc_printk(KERN_ERR, "Failed to set UVC %s control : " - "%d (exp. %u).\n", probe ? "probe" : "commit", - ret, size); + dev_err(&stream->intf->dev, + "Failed to set UVC %s control : %d (exp. %u).\n", + probe ? "probe" : "commit", ret, size); ret = -EIO; } @@ -348,11 +427,11 @@ int uvc_probe_video(struct uvc_streaming *stream, struct uvc_streaming_control *probe) { struct uvc_streaming_control probe_min, probe_max; - u16 bandwidth; unsigned int i; int ret; - /* Perform probing. The device should adjust the requested values + /* + * Perform probing. The device should adjust the requested values * according to its capabilities. However, some devices, namely the * first generation UVC Logitech webcams, don't implement the Video * Probe control properly, and just return the needed bandwidth. For @@ -386,8 +465,7 @@ int uvc_probe_video(struct uvc_streaming *stream, if (stream->intf->num_altsetting == 1) break; - bandwidth = probe->dwMaxPayloadTransferSize; - if (bandwidth <= stream->maxpsize) + if (probe->dwMaxPayloadTransferSize <= stream->maxpsize) break; if (stream->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { @@ -424,18 +502,49 @@ static inline ktime_t uvc_video_get_time(void) return ktime_get_real(); } +static void uvc_video_clock_add_sample(struct uvc_clock *clock, + const struct uvc_clock_sample *sample) +{ + unsigned long flags; + + /* + * If we write new data on the position where we had the last + * overflow, remove the overflow pointer. There is no SOF overflow + * in the whole circular buffer. + */ + if (clock->head == clock->last_sof_overflow) + clock->last_sof_overflow = -1; + + spin_lock_irqsave(&clock->lock, flags); + + if (clock->count > 0 && clock->last_sof > sample->dev_sof) { + /* + * Remove data from the circular buffer that is older than the + * last SOF overflow. We only support one SOF overflow per + * circular buffer. + */ + if (clock->last_sof_overflow != -1) + clock->count = (clock->head - clock->last_sof_overflow + + clock->size) % clock->size; + clock->last_sof_overflow = clock->head; + } + + /* Add sample. */ + clock->samples[clock->head] = *sample; + clock->head = (clock->head + 1) % clock->size; + clock->count = min(clock->count + 1, clock->size); + + spin_unlock_irqrestore(&clock->lock, flags); +} + static void uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, const u8 *data, int len) { - struct uvc_clock_sample *sample; + struct uvc_clock_sample sample; unsigned int header_size; bool has_pts = false; bool has_scr = false; - unsigned long flags; - ktime_t time; - u16 host_sof; - u16 dev_sof; switch (data[1] & (UVC_STREAM_PTS | UVC_STREAM_SCR)) { case UVC_STREAM_PTS | UVC_STREAM_SCR: @@ -460,7 +569,8 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, if (len < header_size) return; - /* Extract the timestamps: + /* + * Extract the timestamps: * * - store the frame PTS in the buffer structure * - if the SCR field is present, retrieve the host SOF counter and @@ -473,19 +583,60 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, if (!has_scr) return; - /* To limit the amount of data, drop SCRs with an SOF identical to the - * previous one. + /* + * To limit the amount of data, drop SCRs with an SOF identical to the + * previous one. This filtering is also needed to support UVC 1.5, where + * all the data packets of the same frame contains the same SOF. In that + * case only the first one will match the host_sof. */ - dev_sof = get_unaligned_le16(&data[header_size - 2]); - if (dev_sof == stream->clock.last_sof) + sample.dev_sof = get_unaligned_le16(&data[header_size - 2]); + if (sample.dev_sof == stream->clock.last_sof) return; - stream->clock.last_sof = dev_sof; + sample.dev_stc = get_unaligned_le32(&data[header_size - 6]); - host_sof = usb_get_current_frame_number(stream->dev->udev); - time = uvc_video_get_time(); + /* + * STC (Source Time Clock) is the clock used by the camera. The UVC 1.5 + * standard states that it "must be captured when the first video data + * of a video frame is put on the USB bus". This is generally understood + * as requiring devices to clear the payload header's SCR bit before + * the first packet containing video data. + * + * Most vendors follow that interpretation, but some (namely SunplusIT + * on some devices) always set the `UVC_STREAM_SCR` bit, fill the SCR + * field with 0's,and expect that the driver only processes the SCR if + * there is data in the packet. + * + * Ignore all the hardware timestamp information if we haven't received + * any data for this frame yet, the packet contains no data, and both + * STC and SOF are zero. This heuristics should be safe on compliant + * devices. This should be safe with compliant devices, as in the very + * unlikely case where a UVC 1.1 device would send timing information + * only before the first packet containing data, and both STC and SOF + * happen to be zero for a particular frame, we would only miss one + * clock sample from many and the clock recovery algorithm wouldn't + * suffer from this condition. + */ + if (buf && buf->bytesused == 0 && len == header_size && + sample.dev_stc == 0 && sample.dev_sof == 0) + return; - /* The UVC specification allows device implementations that can't obtain + sample.host_sof = usb_get_current_frame_number(stream->dev->udev); + + /* + * On some devices, like the Logitech C922, the device SOF does not run + * at a stable rate of 1kHz. For those devices use the host SOF instead. + * In the tests performed so far, this improves the timestamp precision. + * This is probably explained by a small packet handling jitter from the + * host, but the exact reason hasn't been fully determined. + */ + if (stream->dev->quirks & UVC_QUIRK_INVALID_DEVICE_SOF) + sample.dev_sof = sample.host_sof; + + sample.host_time = uvc_video_get_time(); + + /* + * The UVC specification allows device implementations that can't obtain * the USB frame number to keep their own frame counters as long as they * match the size and frequency of the frame number associated with USB * SOF tokens. The SOF values sent by such devices differ from the USB @@ -505,46 +656,29 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, * the 8 LSBs of the delta are kept. */ if (stream->clock.sof_offset == (u16)-1) { - u16 delta_sof = (host_sof - dev_sof) & 255; + u16 delta_sof = (sample.host_sof - sample.dev_sof) & 255; if (delta_sof >= 10) stream->clock.sof_offset = delta_sof; else stream->clock.sof_offset = 0; } - dev_sof = (dev_sof + stream->clock.sof_offset) & 2047; - - spin_lock_irqsave(&stream->clock.lock, flags); - - sample = &stream->clock.samples[stream->clock.head]; - sample->dev_stc = get_unaligned_le32(&data[header_size - 6]); - sample->dev_sof = dev_sof; - sample->host_sof = host_sof; - sample->host_time = time; - - /* Update the sliding window head and count. */ - stream->clock.head = (stream->clock.head + 1) % stream->clock.size; - - if (stream->clock.count < stream->clock.size) - stream->clock.count++; - - spin_unlock_irqrestore(&stream->clock.lock, flags); + sample.dev_sof = (sample.dev_sof + stream->clock.sof_offset) & 2047; + uvc_video_clock_add_sample(&stream->clock, &sample); + stream->clock.last_sof = sample.dev_sof; } -static void uvc_video_clock_reset(struct uvc_streaming *stream) +static void uvc_video_clock_reset(struct uvc_clock *clock) { - struct uvc_clock *clock = &stream->clock; - clock->head = 0; clock->count = 0; clock->last_sof = -1; + clock->last_sof_overflow = -1; clock->sof_offset = -1; } -static int uvc_video_clock_init(struct uvc_streaming *stream) +static int uvc_video_clock_init(struct uvc_clock *clock) { - struct uvc_clock *clock = &stream->clock; - spin_lock_init(&clock->lock); clock->size = 32; @@ -553,15 +687,15 @@ static int uvc_video_clock_init(struct uvc_streaming *stream) if (clock->samples == NULL) return -ENOMEM; - uvc_video_clock_reset(stream); + uvc_video_clock_reset(clock); return 0; } -static void uvc_video_clock_cleanup(struct uvc_streaming *stream) +static void uvc_video_clock_cleanup(struct uvc_clock *clock) { - kfree(stream->clock.samples); - stream->clock.samples = NULL; + kfree(clock->samples); + clock->samples = NULL; } /* @@ -622,7 +756,7 @@ static u16 uvc_video_clock_host_sof(const struct uvc_clock_sample *sample) * to avoid losing precision in the division. Similarly, the host timestamp is * computed with * - * TS = ((TS2 - TS1) * PTS + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2) + * TS = ((TS2 - TS1) * SOF + TS1 * SOF2 - TS2 * SOF1) / (SOF2 - SOF1) (2) * * SOF values are coded on 11 bits by USB. We extend their precision with 16 * decimal bits, leading to a 11.16 coding. @@ -662,11 +796,11 @@ void uvc_video_clock_update(struct uvc_streaming *stream, unsigned long flags; u64 timestamp; u32 delta_stc; - u32 y1, y2; + u32 y1; u32 x1, x2; u32 mean; u32 sof; - u64 y; + u64 y, y2; if (!uvc_hw_timestamps_param) return; @@ -681,11 +815,11 @@ void uvc_video_clock_update(struct uvc_streaming *stream, spin_lock_irqsave(&clock->lock, flags); - if (clock->count < clock->size) + if (clock->count < 2) goto done; - first = &clock->samples[clock->head]; - last = &clock->samples[(clock->head - 1) % clock->size]; + first = &clock->samples[(clock->head - clock->count + clock->size) % clock->size]; + last = &clock->samples[(clock->head - 1 + clock->size) % clock->size]; /* First step, PTS to SOF conversion. */ delta_stc = buf->pts - (1UL << 31); @@ -699,18 +833,30 @@ void uvc_video_clock_update(struct uvc_streaming *stream, if (y2 < y1) y2 += 2048 << 16; + /* + * Have at least 1/4 of a second of timestamps before we + * try to do any calculation. Otherwise we do not have enough + * precision. This value was determined by running Android CTS + * on different devices. + * + * dev_sof runs at 1KHz, and we have a fixed point precision of + * 16 bits. + */ + if ((y2 - y1) < ((1000 / 4) << 16)) + goto done; + y = (u64)(y2 - y1) * (1ULL << 31) + (u64)y1 * (u64)x2 - (u64)y2 * (u64)x1; y = div_u64(y, x2 - x1); sof = y; - uvc_trace(UVC_TRACE_CLOCK, "%s: PTS %u y %llu.%06llu SOF %u.%06llu " - "(x1 %u x2 %u y1 %u y2 %u SOF offset %u)\n", - stream->dev->name, buf->pts, - y >> 16, div_u64((y & 0xffff) * 1000000, 65536), - sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), - x1, x2, y1, y2, clock->sof_offset); + uvc_dbg(stream->dev, CLOCK, + "%s: PTS %u y %llu.%06llu SOF %u.%06llu (x1 %u x2 %u y1 %u y2 %llu SOF offset %u)\n", + stream->dev->name, buf->pts, + y >> 16, div_u64((y & 0xffff) * 1000000, 65536), + sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), + x1, x2, y1, y2, clock->sof_offset); /* Second step, SOF to host clock conversion. */ x1 = (uvc_video_clock_host_sof(first) + 2048) << 16; @@ -721,9 +867,10 @@ void uvc_video_clock_update(struct uvc_streaming *stream, goto done; y1 = NSEC_PER_SEC; - y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1; + y2 = ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1; - /* Interpolated and host SOF timestamps can wrap around at slightly + /* + * Interpolated and host SOF timestamps can wrap around at slightly * different times. Handle this by adding or removing 2048 to or from * the computed SOF value to keep it close to the SOF samples mean * value. @@ -740,13 +887,13 @@ void uvc_video_clock_update(struct uvc_streaming *stream, timestamp = ktime_to_ns(first->host_time) + y - y1; - uvc_trace(UVC_TRACE_CLOCK, "%s: SOF %u.%06llu y %llu ts %llu " - "buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %u)\n", - stream->dev->name, - sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), - y, timestamp, vbuf->vb2_buf.timestamp, - x1, first->host_sof, first->dev_sof, - x2, last->host_sof, last->dev_sof, y1, y2); + uvc_dbg(stream->dev, CLOCK, + "%s: SOF %u.%06llu y %llu ts %llu buf ts %llu (x1 %u/%u/%u x2 %u/%u/%u y1 %u y2 %llu)\n", + stream->dev->name, + sof >> 16, div_u64(((u64)sof & 0xffff) * 1000000LLU, 65536), + y, timestamp, vbuf->vb2_buf.timestamp, + x1, first->host_sof, first->dev_sof, + x2, last->host_sof, last->dev_sof, y1, y2); /* Update the V4L2 buffer. */ vbuf->vb2_buf.timestamp = timestamp; @@ -765,9 +912,9 @@ static void uvc_video_stats_decode(struct uvc_streaming *stream, unsigned int header_size; bool has_pts = false; bool has_scr = false; - u16 uninitialized_var(scr_sof); - u32 uninitialized_var(scr_stc); - u32 uninitialized_var(pts); + u16 scr_sof; + u32 scr_stc; + u32 pts; if (stream->stats.stream.nb_frames == 0 && stream->stats.frame.nb_packets == 0) @@ -821,7 +968,8 @@ static void uvc_video_stats_decode(struct uvc_streaming *stream, stream->stats.frame.pts = pts; } - /* Do all frames have a PTS in their first non-empty packet, or before + /* + * Do all frames have a PTS in their first non-empty packet, or before * their first empty packet ? */ if (stream->stats.frame.size == 0) { @@ -875,16 +1023,15 @@ static void uvc_video_stats_update(struct uvc_streaming *stream) { struct uvc_stats_frame *frame = &stream->stats.frame; - uvc_trace(UVC_TRACE_STATS, "frame %u stats: %u/%u/%u packets, " - "%u/%u/%u pts (%searly %sinitial), %u/%u scr, " - "last pts/stc/sof %u/%u/%u\n", - stream->sequence, frame->first_data, - frame->nb_packets - frame->nb_empty, frame->nb_packets, - frame->nb_pts_diffs, frame->last_pts_diff, frame->nb_pts, - frame->has_early_pts ? "" : "!", - frame->has_initial_pts ? "" : "!", - frame->nb_scr_diffs, frame->nb_scr, - frame->pts, frame->scr_stc, frame->scr_sof); + uvc_dbg(stream->dev, STATS, + "frame %u stats: %u/%u/%u packets, %u/%u/%u pts (%searly %sinitial), %u/%u scr, last pts/stc/sof %u/%u/%u\n", + stream->sequence, frame->first_data, + frame->nb_packets - frame->nb_empty, frame->nb_packets, + frame->nb_pts_diffs, frame->last_pts_diff, frame->nb_pts, + frame->has_early_pts ? "" : "!", + frame->has_initial_pts ? "" : "!", + frame->nb_scr_diffs, frame->nb_scr, + frame->pts, frame->scr_stc, frame->scr_sof); stream->stats.stream.nb_frames++; stream->stats.stream.nb_packets += stream->stats.frame.nb_packets; @@ -913,7 +1060,8 @@ size_t uvc_video_stats_dump(struct uvc_streaming *stream, char *buf, unsigned int duration; size_t count = 0; - /* Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF + /* + * Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF * frequency this will not overflow before more than 1h. */ duration = ktime_ms_delta(stream->stats.stream.stop_ts, @@ -965,7 +1113,8 @@ static void uvc_video_stats_stop(struct uvc_streaming *stream) * Video codecs */ -/* Video payload decoding is handled by uvc_video_decode_start(), +/* + * Video payload decoding is handled by uvc_video_decode_start(), * uvc_video_decode_data() and uvc_video_decode_end(). * * uvc_video_decode_start is called with URB data at the start of a bulk or @@ -1003,9 +1152,11 @@ static void uvc_video_stats_stop(struct uvc_streaming *stream) static int uvc_video_decode_start(struct uvc_streaming *stream, struct uvc_buffer *buf, const u8 *data, int len) { + u8 header_len; u8 fid; - /* Sanity checks: + /* + * Sanity checks: * - packet must be at least 2 bytes long * - bHeaderLength value must be at least 2 bytes (see above) * - bHeaderLength value can't be larger than the packet size. @@ -1015,9 +1166,11 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, return -EINVAL; } + header_len = data[0]; fid = data[1] & UVC_STREAM_FID; - /* Increase the sequence number regardless of any buffer states, so + /* + * Increase the sequence number regardless of any buffer states, so * that discontinuous sequence numbers always indicate lost frames. */ if (stream->last_fid != fid) { @@ -1029,7 +1182,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, uvc_video_clock_decode(stream, buf, data, len); uvc_video_stats_decode(stream, data, len); - /* Store the payload FID bit and return immediately when the buffer is + /* + * Store the payload FID bit and return immediately when the buffer is * NULL. */ if (buf == NULL) { @@ -1039,13 +1193,14 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, /* Mark the buffer as bad if the error bit is set. */ if (data[1] & UVC_STREAM_ERR) { - uvc_trace(UVC_TRACE_FRAME, "Marking buffer as bad (error bit " - "set).\n"); + uvc_dbg(stream->dev, FRAME, + "Marking buffer as bad (error bit set)\n"); buf->error = 1; } - /* Synchronize to the input stream by waiting for the FID bit to be - * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + /* + * Synchronize to the input stream by waiting for the FID bit to be + * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE. * stream->last_fid is initialized to -1, so the first isochronous * frame will always be in sync. * @@ -1054,8 +1209,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, */ if (buf->state != UVC_BUF_STATE_ACTIVE) { if (fid == stream->last_fid) { - uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " - "sync).\n"); + uvc_dbg(stream->dev, FRAME, + "Dropping payload (out of sync)\n"); if ((stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && (data[1] & UVC_STREAM_EOF)) stream->last_fid ^= UVC_STREAM_FID; @@ -1070,7 +1225,8 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, buf->state = UVC_BUF_STATE_ACTIVE; } - /* Mark the buffer as done if we're at the beginning of a new frame. + /* + * Mark the buffer as done if we're at the beginning of a new frame. * End of frame detection is better implemented by checking the EOF * bit (FID bit toggling is delayed by one frame compared to the EOF * bit), but some devices don't set the bit at end of frame (and the @@ -1086,15 +1242,46 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, * previous payload had the EOF bit set. */ if (fid != stream->last_fid && buf->bytesused != 0) { - uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " - "toggled).\n"); + uvc_dbg(stream->dev, FRAME, + "Frame complete (FID bit toggled)\n"); buf->state = UVC_BUF_STATE_READY; return -EAGAIN; } + /* + * Some cameras, when running two parallel streams (one MJPEG alongside + * another non-MJPEG stream), are known to lose the EOF packet for a frame. + * We can detect the end of a frame by checking for a new SOI marker, as + * the SOI always lies on the packet boundary between two frames for + * these devices. + */ + if (stream->dev->quirks & UVC_QUIRK_MJPEG_NO_EOF && + (stream->cur_format->fcc == V4L2_PIX_FMT_MJPEG || + stream->cur_format->fcc == V4L2_PIX_FMT_JPEG)) { + const u8 *packet = data + header_len; + + if (len >= header_len + 2 && + packet[0] == 0xff && packet[1] == JPEG_MARKER_SOI && + buf->bytesused != 0) { + buf->state = UVC_BUF_STATE_READY; + buf->error = 1; + stream->last_fid ^= UVC_STREAM_FID; + return -EAGAIN; + } + } + stream->last_fid = fid; - return data[0]; + return header_len; +} + +static inline enum dma_data_direction uvc_stream_dir( + struct uvc_streaming *stream) +{ + if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + return DMA_FROM_DEVICE; + else + return DMA_TO_DEVICE; } /* @@ -1120,8 +1307,8 @@ static void uvc_video_copy_data_work(struct work_struct *work) ret = usb_submit_urb(uvc_urb->urb, GFP_KERNEL); if (ret < 0) - uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", - ret); + dev_err(&uvc_urb->stream->intf->dev, + "Failed to resubmit video URB (%d).\n", ret); } static void uvc_video_decode_data(struct uvc_urb *uvc_urb, @@ -1148,7 +1335,8 @@ static void uvc_video_decode_data(struct uvc_urb *uvc_urb, /* Complete the current frame if the buffer size was exceeded. */ if (len > maxlen) { - uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); + uvc_dbg(uvc_urb->stream->dev, FRAME, + "Frame complete (overflow)\n"); buf->error = 1; buf->state = UVC_BUF_STATE_READY; } @@ -1161,16 +1349,17 @@ static void uvc_video_decode_end(struct uvc_streaming *stream, { /* Mark the buffer as done if the EOF marker is set. */ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { - uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); + uvc_dbg(stream->dev, FRAME, "Frame complete (EOF found)\n"); if (data[0] == len) - uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); + uvc_dbg(stream->dev, FRAME, "EOF in empty payload\n"); buf->state = UVC_BUF_STATE_READY; if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) stream->last_fid ^= UVC_STREAM_FID; } } -/* Video payload encoding is handled by uvc_video_encode_header() and +/* + * Video payload encoding is handled by uvc_video_encode_header() and * uvc_video_encode_data(). Only bulk transfers are currently supported. * * uvc_video_encode_header is called at the start of a payload. It adds header @@ -1239,12 +1428,6 @@ static void uvc_video_decode_meta(struct uvc_streaming *stream, if (!meta_buf || length == 2) return; - if (meta_buf->length - meta_buf->bytesused < - length + sizeof(meta->ns) + sizeof(meta->sof)) { - meta_buf->error = 1; - return; - } - has_pts = mem[1] & UVC_STREAM_PTS; has_scr = mem[1] & UVC_STREAM_SCR; @@ -1265,6 +1448,12 @@ static void uvc_video_decode_meta(struct uvc_streaming *stream, !memcmp(scr, stream->clock.last_scr, 6))) return; + if (meta_buf->length - meta_buf->bytesused < + length + sizeof(meta->ns) + sizeof(meta->sof)) { + meta_buf->error = 1; + return; + } + meta = (struct uvc_meta_buf *)((u8 *)meta_buf->mem + meta_buf->bytesused); local_irq_save(flags); time = uvc_video_get_time(); @@ -1276,16 +1465,18 @@ static void uvc_video_decode_meta(struct uvc_streaming *stream, if (has_scr) memcpy(stream->clock.last_scr, scr, 6); - memcpy(&meta->length, mem, length); + meta->length = mem[0]; + meta->flags = mem[1]; + memcpy(meta->buf, &mem[2], length - 2); meta_buf->bytesused += length + sizeof(meta->ns) + sizeof(meta->sof); - uvc_trace(UVC_TRACE_FRAME, - "%s(): t-sys %lluns, SOF %u, len %u, flags 0x%x, PTS %u, STC %u frame SOF %u\n", - __func__, ktime_to_ns(time), meta->sof, meta->length, - meta->flags, - has_pts ? *(u32 *)meta->buf : 0, - has_scr ? *(u32 *)scr : 0, - has_scr ? *(u32 *)(scr + 4) & 0x7ff : 0); + uvc_dbg(stream->dev, FRAME, + "%s(): t-sys %lluns, SOF %u, len %u, flags 0x%x, PTS %u, STC %u frame SOF %u\n", + __func__, ktime_to_ns(time), meta->sof, meta->length, + meta->flags, + has_pts ? *(u32 *)meta->buf : 0, + has_scr ? *(u32 *)scr : 0, + has_scr ? *(u32 *)(scr + 4) & 0x7ff : 0); } /* ------------------------------------------------------------------------ @@ -1339,8 +1530,9 @@ static void uvc_video_decode_isoc(struct uvc_urb *uvc_urb, for (i = 0; i < urb->number_of_packets; ++i) { if (urb->iso_frame_desc[i].status < 0) { - uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " - "lost (%d).\n", urb->iso_frame_desc[i].status); + uvc_dbg(stream->dev, FRAME, + "USB isochronous frame lost (%d)\n", + urb->iso_frame_desc[i].status); /* Mark the buffer as faulty. */ if (buf != NULL) buf->error = 1; @@ -1393,7 +1585,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, len = urb->actual_length; stream->bulk.payload_size += len; - /* If the URB is the first of its payload, decode and save the + /* + * If the URB is the first of its payload, decode and save the * header. */ if (stream->bulk.header_size == 0 && !stream->bulk.skip_payload) { @@ -1417,7 +1610,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, } } - /* The buffer queue might have been cancelled while a bulk transfer + /* + * The buffer queue might have been cancelled while a bulk transfer * was in progress, so we can reach here with buf equal to NULL. Make * sure buf is never dereferenced if NULL. */ @@ -1426,7 +1620,8 @@ static void uvc_video_decode_bulk(struct uvc_urb *uvc_urb, if (!stream->bulk.skip_payload && buf != NULL) uvc_video_decode_data(uvc_urb, buf, mem, len); - /* Detect the payload end by a URB smaller than the maximum size (or + /* + * Detect the payload end by a URB smaller than the maximum size (or * a payload size equal to the maximum) and process the header again. */ if (urb->actual_length < urb->transfer_buffer_length || @@ -1496,7 +1691,7 @@ static void uvc_video_complete(struct urb *urb) struct uvc_streaming *stream = uvc_urb->stream; struct uvc_video_queue *queue = &stream->queue; struct uvc_video_queue *qmeta = &stream->meta.queue; - struct vb2_queue *vb2_qmeta = stream->meta.vdev.queue; + struct vb2_queue *vb2_qmeta = stream->meta.queue.vdev.queue; struct uvc_buffer *buf = NULL; struct uvc_buffer *buf_meta = NULL; unsigned long flags; @@ -1507,13 +1702,14 @@ static void uvc_video_complete(struct urb *urb) break; default: - uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " - "completion handler.\n", urb->status); - /* fall through */ + dev_warn(&stream->intf->dev, + "Non-zero status (%d) in video completion handler.\n", + urb->status); + fallthrough; case -ENOENT: /* usb_poison_urb() called. */ if (stream->frozen) return; - /* fall through */ + fallthrough; case -ECONNRESET: /* usb_unlink_urb() called. */ case -ESHUTDOWN: /* The endpoint is being disabled. */ uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); @@ -1545,9 +1741,8 @@ static void uvc_video_complete(struct urb *urb) if (!uvc_urb->async_operations) { ret = usb_submit_urb(uvc_urb->urb, GFP_ATOMIC); if (ret < 0) - uvc_printk(KERN_ERR, - "Failed to resubmit video URB (%d).\n", - ret); + dev_err(&stream->intf->dev, + "Failed to resubmit video URB (%d).\n", ret); return; } @@ -1559,24 +1754,34 @@ static void uvc_video_complete(struct urb *urb) */ static void uvc_free_urb_buffers(struct uvc_streaming *stream) { + struct usb_device *udev = stream->dev->udev; struct uvc_urb *uvc_urb; for_each_uvc_urb(uvc_urb, stream) { if (!uvc_urb->buffer) continue; -#ifndef CONFIG_DMA_NONCOHERENT - usb_free_coherent(stream->dev->udev, stream->urb_size, - uvc_urb->buffer, uvc_urb->dma); -#else - kfree(uvc_urb->buffer); -#endif + usb_free_noncoherent(udev, stream->urb_size, uvc_urb->buffer, + uvc_stream_dir(stream), uvc_urb->sgt); uvc_urb->buffer = NULL; + uvc_urb->sgt = NULL; } stream->urb_size = 0; } +static bool uvc_alloc_urb_buffer(struct uvc_streaming *stream, + struct uvc_urb *uvc_urb, gfp_t gfp_flags) +{ + struct usb_device *udev = stream->dev->udev; + + uvc_urb->buffer = usb_alloc_noncoherent(udev, stream->urb_size, + gfp_flags, &uvc_urb->dma, + uvc_stream_dir(stream), + &uvc_urb->sgt); + return !!uvc_urb->buffer; +} + /* * Allocate transfer buffers. This function can be called with buffers * already allocated when resuming from suspend, in which case it will @@ -1598,7 +1803,8 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, if (stream->urb_size) return stream->urb_size / psize; - /* Compute the number of packets. Bulk endpoints might transfer UVC + /* + * Compute the number of packets. Bulk endpoints might transfer UVC * payloads across multiple URBs. */ npackets = DIV_ROUND_UP(size, psize); @@ -1607,19 +1813,12 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, /* Retry allocations until one succeed. */ for (; npackets > 1; npackets /= 2) { + stream->urb_size = psize * npackets; + for (i = 0; i < UVC_URBS; ++i) { struct uvc_urb *uvc_urb = &stream->uvc_urb[i]; - stream->urb_size = psize * npackets; -#ifndef CONFIG_DMA_NONCOHERENT - uvc_urb->buffer = usb_alloc_coherent( - stream->dev->udev, stream->urb_size, - gfp_flags | __GFP_NOWARN, &uvc_urb->dma); -#else - uvc_urb->buffer = - kmalloc(stream->urb_size, gfp_flags | __GFP_NOWARN); -#endif - if (!uvc_urb->buffer) { + if (!uvc_alloc_urb_buffer(stream, uvc_urb, gfp_flags)) { uvc_free_urb_buffers(stream); break; } @@ -1628,15 +1827,16 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream, } if (i == UVC_URBS) { - uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers " - "of %ux%u bytes each.\n", UVC_URBS, npackets, - psize); + uvc_dbg(stream->dev, VIDEO, + "Allocated %u URB buffers of %ux%u bytes each\n", + UVC_URBS, npackets, psize); return npackets; } } - uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes " - "per packet).\n", psize); + uvc_dbg(stream->dev, VIDEO, + "Failed to allocate URB buffers (%u bytes per packet)\n", + psize); return 0; } @@ -1670,32 +1870,6 @@ static void uvc_video_stop_transfer(struct uvc_streaming *stream, } /* - * Compute the maximum number of bytes per interval for an endpoint. - */ -static unsigned int uvc_endpoint_max_bpi(struct usb_device *dev, - struct usb_host_endpoint *ep) -{ - u16 psize; - u16 mult; - - switch (dev->speed) { - case USB_SPEED_SUPER: - case USB_SPEED_SUPER_PLUS: - return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval); - case USB_SPEED_HIGH: - psize = usb_endpoint_maxp(&ep->desc); - mult = usb_endpoint_maxp_mult(&ep->desc); - return psize * mult; - case USB_SPEED_WIRELESS: - psize = usb_endpoint_maxp(&ep->desc); - return psize; - default: - psize = usb_endpoint_maxp(&ep->desc); - return psize; - } -} - -/* * Initialize isochronous URBs and allocate transfer buffers. The packet size * is given by the endpoint. */ @@ -1705,10 +1879,10 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream, struct urb *urb; struct uvc_urb *uvc_urb; unsigned int npackets, i; - u16 psize; + u32 psize; u32 size; - psize = uvc_endpoint_max_bpi(stream->dev->udev, ep); + psize = usb_endpoint_max_periodic_payload(stream->dev->udev, ep); size = stream->ctrl.dwMaxVideoFrameSize; npackets = uvc_alloc_urb_buffers(stream, size, psize, gfp_flags); @@ -1728,17 +1902,14 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream, urb->context = uvc_urb; urb->pipe = usb_rcvisocpipe(stream->dev->udev, ep->desc.bEndpointAddress); -#ifndef CONFIG_DMA_NONCOHERENT urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; urb->transfer_dma = uvc_urb->dma; -#else - urb->transfer_flags = URB_ISO_ASAP; -#endif urb->interval = ep->desc.bInterval; urb->transfer_buffer = uvc_urb->buffer; urb->complete = uvc_video_complete; urb->number_of_packets = npackets; urb->transfer_buffer_length = size; + urb->sgt = uvc_urb->sgt; for (i = 0; i < npackets; ++i) { urb->iso_frame_desc[i].offset = i * psize; @@ -1793,10 +1964,9 @@ static int uvc_init_video_bulk(struct uvc_streaming *stream, usb_fill_bulk_urb(urb, stream->dev->udev, pipe, uvc_urb->buffer, size, uvc_video_complete, uvc_urb); -#ifndef CONFIG_DMA_NONCOHERENT urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; urb->transfer_dma = uvc_urb->dma; -#endif + urb->sgt = uvc_urb->sgt; uvc_urb->urb = urb; } @@ -1828,19 +1998,20 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, struct usb_host_endpoint *best_ep = NULL; unsigned int best_psize = UINT_MAX; unsigned int bandwidth; - unsigned int uninitialized_var(altsetting); + unsigned int altsetting; int intfnum = stream->intfnum; /* Isochronous endpoint, select the alternate setting. */ bandwidth = stream->ctrl.dwMaxPayloadTransferSize; if (bandwidth == 0) { - uvc_trace(UVC_TRACE_VIDEO, "Device requested null " - "bandwidth, defaulting to lowest.\n"); + uvc_dbg(stream->dev, VIDEO, + "Device requested null bandwidth, defaulting to lowest\n"); bandwidth = 1; } else { - uvc_trace(UVC_TRACE_VIDEO, "Device requested %u " - "B/frame bandwidth.\n", bandwidth); + uvc_dbg(stream->dev, VIDEO, + "Device requested %u B/frame bandwidth\n", + bandwidth); } for (i = 0; i < intf->num_altsetting; ++i) { @@ -1854,8 +2025,8 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, continue; /* Check if the bandwidth is high enough. */ - psize = uvc_endpoint_max_bpi(stream->dev->udev, ep); - if (psize >= bandwidth && psize <= best_psize) { + psize = usb_endpoint_max_periodic_payload(stream->dev->udev, ep); + if (psize >= bandwidth && psize < best_psize) { altsetting = alts->desc.bAlternateSetting; best_psize = psize; best_ep = ep; @@ -1863,13 +2034,25 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, } if (best_ep == NULL) { - uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting " - "for requested bandwidth.\n"); + uvc_dbg(stream->dev, VIDEO, + "No fast enough alt setting for requested bandwidth\n"); return -EIO; } - uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u " - "(%u B/frame bandwidth).\n", altsetting, best_psize); + uvc_dbg(stream->dev, VIDEO, + "Selecting alternate setting %u (%u B/frame bandwidth)\n", + altsetting, best_psize); + + /* + * Some devices, namely the Logitech C910 and B910, are unable + * to recover from a USB autosuspend, unless the alternate + * setting of the streaming interface is toggled. + */ + if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) { + usb_set_interface(stream->dev->udev, intfnum, + altsetting); + usb_set_interface(stream->dev->udev, intfnum, 0); + } ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); if (ret < 0) @@ -1883,6 +2066,10 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, if (ep == NULL) return -EIO; + /* Reject broken descriptors. */ + if (usb_endpoint_maxp(&ep->desc) == 0) + return -EIO; + ret = uvc_init_video_bulk(stream, ep, gfp_flags); } @@ -1893,14 +2080,16 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, for_each_uvc_urb(uvc_urb, stream) { ret = usb_submit_urb(uvc_urb->urb, gfp_flags); if (ret < 0) { - uvc_printk(KERN_ERR, "Failed to submit URB %u (%d).\n", - uvc_urb_index(uvc_urb), ret); + dev_err(&stream->intf->dev, + "Failed to submit URB %u (%d).\n", + uvc_urb_index(uvc_urb), ret); uvc_video_stop_transfer(stream, 1); return ret; } } - /* The Logitech C920 temporarily forgets that it should not be adjusting + /* + * The Logitech C920 temporarily forgets that it should not be adjusting * Exposure Absolute during init so restore controls to stored values. */ if (stream->dev->quirks & UVC_QUIRK_RESTORE_CTRLS_ON_INIT) @@ -1943,7 +2132,8 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) { int ret; - /* If the bus has been reset on resume, set the alternate setting to 0. + /* + * If the bus has been reset on resume, set the alternate setting to 0. * This should be the default value, but some devices crash or otherwise * misbehave if they don't receive a SET_INTERFACE request before any * other video control request. @@ -1953,7 +2143,7 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) stream->frozen = 0; - uvc_video_clock_reset(stream); + uvc_video_clock_reset(&stream->clock); if (!uvc_queue_streaming(&stream->queue)) return 0; @@ -1982,27 +2172,30 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) int uvc_video_init(struct uvc_streaming *stream) { struct uvc_streaming_control *probe = &stream->ctrl; - struct uvc_format *format = NULL; - struct uvc_frame *frame = NULL; + const struct uvc_format *format = NULL; + const struct uvc_frame *frame = NULL; struct uvc_urb *uvc_urb; unsigned int i; int ret; if (stream->nformats == 0) { - uvc_printk(KERN_INFO, "No supported video formats found.\n"); + dev_info(&stream->intf->dev, + "No supported video formats found.\n"); return -EINVAL; } atomic_set(&stream->active, 0); - /* Alternate setting 0 should be the default, yet the XBox Live Vision + /* + * Alternate setting 0 should be the default, yet the XBox Live Vision * Cam (and possibly other devices) crash or otherwise misbehave if * they don't receive a SET_INTERFACE request before any other video * control request. */ usb_set_interface(stream->dev->udev, stream->intfnum, 0); - /* Set the streaming probe control with default streaming parameters + /* + * Set the streaming probe control with default streaming parameters * retrieved from the device. Webcams that don't support GET_DEF * requests on the probe control will just keep their current streaming * parameters. @@ -2010,37 +2203,55 @@ int uvc_video_init(struct uvc_streaming *stream) if (uvc_get_video_ctrl(stream, probe, 1, UVC_GET_DEF) == 0) uvc_set_video_ctrl(stream, probe, 1); - /* Initialize the streaming parameters with the probe control current + /* + * Initialize the streaming parameters with the probe control current * value. This makes sure SET_CUR requests on the streaming commit * control will always use values retrieved from a successful GET_CUR * request on the probe control, as required by the UVC specification. */ ret = uvc_get_video_ctrl(stream, probe, 1, UVC_GET_CUR); + + /* + * Elgato Cam Link 4k can be in a stalled state if the resolution of + * the external source has changed while the firmware initializes. + * Once in this state, the device is useless until it receives a + * USB reset. It has even been observed that the stalled state will + * continue even after unplugging the device. + */ + if (ret == -EPROTO && + usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k)) { + dev_err(&stream->intf->dev, "Elgato Cam Link 4K firmware crash detected\n"); + dev_err(&stream->intf->dev, "Resetting the device, unplug and replug to recover\n"); + usb_reset_device(stream->dev->udev); + } + if (ret < 0) return ret; - /* Check if the default format descriptor exists. Use the first + /* + * Check if the default format descriptor exists. Use the first * available format otherwise. */ for (i = stream->nformats; i > 0; --i) { - format = &stream->format[i-1]; + format = &stream->formats[i-1]; if (format->index == probe->bFormatIndex) break; } if (format->nframes == 0) { - uvc_printk(KERN_INFO, "No frame descriptor found for the " - "default format.\n"); + dev_info(&stream->intf->dev, + "No frame descriptor found for the default format.\n"); return -EINVAL; } - /* Zero bFrameIndex might be correct. Stream-based formats (including + /* + * Zero bFrameIndex might be correct. Stream-based formats (including * MPEG-2 TS and DV) do not support frames but have a dummy frame * descriptor with bFrameIndex set to zero. If the default frame * descriptor is not found, use the first available frame. */ for (i = format->nframes; i > 0; --i) { - frame = &format->frame[i-1]; + frame = &format->frames[i-1]; if (frame->bFrameIndex == probe->bFrameIndex) break; } @@ -2064,8 +2275,8 @@ int uvc_video_init(struct uvc_streaming *stream) if (stream->intf->num_altsetting == 1) stream->decode = uvc_video_encode_bulk; else { - uvc_printk(KERN_INFO, "Isochronous endpoints are not " - "supported for video output devices.\n"); + dev_info(&stream->intf->dev, + "Isochronous endpoints are not supported for video output devices.\n"); return -EINVAL; } } @@ -2081,7 +2292,7 @@ int uvc_video_start_streaming(struct uvc_streaming *stream) { int ret; - ret = uvc_video_clock_init(stream); + ret = uvc_video_clock_init(&stream->clock); if (ret < 0) return ret; @@ -2099,7 +2310,7 @@ int uvc_video_start_streaming(struct uvc_streaming *stream) error_video: usb_set_interface(stream->dev->udev, stream->intfnum, 0); error_commit: - uvc_video_clock_cleanup(stream); + uvc_video_clock_cleanup(&stream->clock); return ret; } @@ -2111,7 +2322,8 @@ void uvc_video_stop_streaming(struct uvc_streaming *stream) if (stream->intf->num_altsetting > 1) { usb_set_interface(stream->dev->udev, stream->intfnum, 0); } else { - /* UVC doesn't specify how to inform a bulk-based device + /* + * UVC doesn't specify how to inform a bulk-based device * when the video stream is stopped. Windows sends a * CLEAR_FEATURE(HALT) request to the video streaming * bulk endpoint, mimic the same behaviour. @@ -2126,5 +2338,5 @@ void uvc_video_stop_streaming(struct uvc_streaming *stream) usb_clear_halt(stream->dev->udev, pipe); } - uvc_video_clock_cleanup(stream); + uvc_video_clock_cleanup(&stream->clock); } |