summaryrefslogtreecommitdiff
path: root/drivers/message/i2o/README.ioctl
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/message/i2o/README.ioctl')
-rw-r--r--drivers/message/i2o/README.ioctl394
1 files changed, 0 insertions, 394 deletions
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
deleted file mode 100644
index 4a7d2ebdfc97..000000000000
--- a/drivers/message/i2o/README.ioctl
+++ /dev/null
@@ -1,394 +0,0 @@
-
-Linux I2O User Space Interface
-rev 0.3 - 04/20/99
-
-=============================================================================
-Originally written by Deepak Saxena(deepak@plexity.net)
-Currently maintained by Deepak Saxena(deepak@plexity.net)
-=============================================================================
-
-I. Introduction
-
-The Linux I2O subsystem provides a set of ioctl() commands that can be
-utilized by user space applications to communicate with IOPs and devices
-on individual IOPs. This document defines the specific ioctl() commands
-that are available to the user and provides examples of their uses.
-
-This document assumes the reader is familiar with or has access to the
-I2O specification as no I2O message parameters are outlined. For information
-on the specification, see http://www.i2osig.org
-
-This document and the I2O user space interface are currently maintained
-by Deepak Saxena. Please send all comments, errata, and bug fixes to
-deepak@csociety.purdue.edu
-
-II. IOP Access
-
-Access to the I2O subsystem is provided through the device file named
-/dev/i2o/ctl. This file is a character file with major number 10 and minor
-number 166. It can be created through the following command:
-
- mknod /dev/i2o/ctl c 10 166
-
-III. Determining the IOP Count
-
- SYNOPSIS
-
- ioctl(fd, I2OGETIOPS, int *count);
-
- u8 count[MAX_I2O_CONTROLLERS];
-
- DESCRIPTION
-
- This function returns the system's active IOP table. count should
- point to a buffer containing MAX_I2O_CONTROLLERS entries. Upon
- returning, each entry will contain a non-zero value if the given
- IOP unit is active, and NULL if it is inactive or non-existent.
-
- RETURN VALUE.
-
- Returns 0 if no errors occur, and -1 otherwise. If an error occurs,
- errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
-
-IV. Getting Hardware Resource Table
-
- SYNOPSIS
-
- ioctl(fd, I2OHRTGET, struct i2o_cmd_hrt *hrt);
-
- struct i2o_cmd_hrtlct
- {
- u32 iop; /* IOP unit number */
- void *resbuf; /* Buffer for result */
- u32 *reslen; /* Buffer length in bytes */
- };
-
- DESCRIPTION
-
- This function returns the Hardware Resource Table of the IOP specified
- by hrt->iop in the buffer pointed to by hrt->resbuf. The actual size of
- the data is written into *(hrt->reslen).
-
- RETURNS
-
- This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ENOBUFS Buffer not large enough. If this occurs, the required
- buffer length is written into *(hrt->reslen)
-
-V. Getting Logical Configuration Table
-
- SYNOPSIS
-
- ioctl(fd, I2OLCTGET, struct i2o_cmd_lct *lct);
-
- struct i2o_cmd_hrtlct
- {
- u32 iop; /* IOP unit number */
- void *resbuf; /* Buffer for result */
- u32 *reslen; /* Buffer length in bytes */
- };
-
- DESCRIPTION
-
- This function returns the Logical Configuration Table of the IOP specified
- by lct->iop in the buffer pointed to by lct->resbuf. The actual size of
- the data is written into *(lct->reslen).
-
- RETURNS
-
- This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ENOBUFS Buffer not large enough. If this occurs, the required
- buffer length is written into *(lct->reslen)
-
-VI. Setting Parameters
-
- SYNOPSIS
-
- ioctl(fd, I2OPARMSET, struct i2o_parm_setget *ops);
-
- struct i2o_cmd_psetget
- {
- u32 iop; /* IOP unit number */
- u32 tid; /* Target device TID */
- void *opbuf; /* Operation List buffer */
- u32 oplen; /* Operation List buffer length in bytes */
- void *resbuf; /* Result List buffer */
- u32 *reslen; /* Result List buffer length in bytes */
- };
-
- DESCRIPTION
-
- This function posts a UtilParamsSet message to the device identified
- by ops->iop and ops->tid. The operation list for the message is
- sent through the ops->opbuf buffer, and the result list is written
- into the buffer pointed to by ops->resbuf. The number of bytes
- written is placed into *(ops->reslen).
-
- RETURNS
-
- The return value is the size in bytes of the data written into
- ops->resbuf if no errors occur. If an error occurs, -1 is returned
- and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ENOBUFS Buffer not large enough. If this occurs, the required
- buffer length is written into *(ops->reslen)
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
- A return value of 0 does not mean that the value was actually
- changed properly on the IOP. The user should check the result
- list to determine the specific status of the transaction.
-
-VII. Getting Parameters
-
- SYNOPSIS
-
- ioctl(fd, I2OPARMGET, struct i2o_parm_setget *ops);
-
- struct i2o_parm_setget
- {
- u32 iop; /* IOP unit number */
- u32 tid; /* Target device TID */
- void *opbuf; /* Operation List buffer */
- u32 oplen; /* Operation List buffer length in bytes */
- void *resbuf; /* Result List buffer */
- u32 *reslen; /* Result List buffer length in bytes */
- };
-
- DESCRIPTION
-
- This function posts a UtilParamsGet message to the device identified
- by ops->iop and ops->tid. The operation list for the message is
- sent through the ops->opbuf buffer, and the result list is written
- into the buffer pointed to by ops->resbuf. The actual size of data
- written is placed into *(ops->reslen).
-
- RETURNS
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ENOBUFS Buffer not large enough. If this occurs, the required
- buffer length is written into *(ops->reslen)
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
- A return value of 0 does not mean that the value was actually
- properly retrieved. The user should check the result list
- to determine the specific status of the transaction.
-
-VIII. Downloading Software
-
- SYNOPSIS
-
- ioctl(fd, I2OSWDL, struct i2o_sw_xfer *sw);
-
- struct i2o_sw_xfer
- {
- u32 iop; /* IOP unit number */
- u8 flags; /* DownloadFlags field */
- u8 sw_type; /* Software type */
- u32 sw_id; /* Software ID */
- void *buf; /* Pointer to software buffer */
- u32 *swlen; /* Length of software buffer */
- u32 *maxfrag; /* Number of fragments */
- u32 *curfrag; /* Current fragment number */
- };
-
- DESCRIPTION
-
- This function downloads a software fragment pointed by sw->buf
- to the iop identified by sw->iop. The DownloadFlags, SwID, SwType
- and SwSize fields of the ExecSwDownload message are filled in with
- the values of sw->flags, sw->sw_id, sw->sw_type and *(sw->swlen).
-
- The fragments _must_ be sent in order and be 8K in size. The last
- fragment _may_ be shorter, however. The kernel will compute its
- size based on information in the sw->swlen field.
-
- Please note that SW transfers can take a long time.
-
- RETURNS
-
- This function returns 0 no errors occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
-IX. Uploading Software
-
- SYNOPSIS
-
- ioctl(fd, I2OSWUL, struct i2o_sw_xfer *sw);
-
- struct i2o_sw_xfer
- {
- u32 iop; /* IOP unit number */
- u8 flags; /* UploadFlags */
- u8 sw_type; /* Software type */
- u32 sw_id; /* Software ID */
- void *buf; /* Pointer to software buffer */
- u32 *swlen; /* Length of software buffer */
- u32 *maxfrag; /* Number of fragments */
- u32 *curfrag; /* Current fragment number */
- };
-
- DESCRIPTION
-
- This function uploads a software fragment from the IOP identified
- by sw->iop, sw->sw_type, sw->sw_id and optionally sw->swlen fields.
- The UploadFlags, SwID, SwType and SwSize fields of the ExecSwUpload
- message are filled in with the values of sw->flags, sw->sw_id,
- sw->sw_type and *(sw->swlen).
-
- The fragments _must_ be requested in order and be 8K in size. The
- user is responsible for allocating memory pointed by sw->buf. The
- last fragment _may_ be shorter.
-
- Please note that SW transfers can take a long time.
-
- RETURNS
-
- This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
-X. Removing Software
-
- SYNOPSIS
-
- ioctl(fd, I2OSWDEL, struct i2o_sw_xfer *sw);
-
- struct i2o_sw_xfer
- {
- u32 iop; /* IOP unit number */
- u8 flags; /* RemoveFlags */
- u8 sw_type; /* Software type */
- u32 sw_id; /* Software ID */
- void *buf; /* Unused */
- u32 *swlen; /* Length of the software data */
- u32 *maxfrag; /* Unused */
- u32 *curfrag; /* Unused */
- };
-
- DESCRIPTION
-
- This function removes software from the IOP identified by sw->iop.
- The RemoveFlags, SwID, SwType and SwSize fields of the ExecSwRemove message
- are filled in with the values of sw->flags, sw->sw_id, sw->sw_type and
- *(sw->swlen). Give zero in *(sw->len) if the value is unknown. IOP uses
- *(sw->swlen) value to verify correct identication of the module to remove.
- The actual size of the module is written into *(sw->swlen).
-
- RETURNS
-
- This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
-X. Validating Configuration
-
- SYNOPSIS
-
- ioctl(fd, I2OVALIDATE, int *iop);
- u32 iop;
-
- DESCRIPTION
-
- This function posts an ExecConfigValidate message to the controller
- identified by iop. This message indicates that the current
- configuration is accepted. The iop changes the status of suspect drivers
- to valid and may delete old drivers from its store.
-
- RETURNS
-
- This function returns 0 if no erro occur. If an error occurs, -1 is
- returned and errno is set appropriately:
-
- ETIMEDOUT Timeout waiting for reply message
- ENXIO Invalid IOP number
-
-XI. Configuration Dialog
-
- SYNOPSIS
-
- ioctl(fd, I2OHTML, struct i2o_html *htquery);
- struct i2o_html
- {
- u32 iop; /* IOP unit number */
- u32 tid; /* Target device ID */
- u32 page; /* HTML page */
- void *resbuf; /* Buffer for reply HTML page */
- u32 *reslen; /* Length in bytes of reply buffer */
- void *qbuf; /* Pointer to HTTP query string */
- u32 qlen; /* Length in bytes of query string buffer */
- };
-
- DESCRIPTION
-
- This function posts an UtilConfigDialog message to the device identified
- by htquery->iop and htquery->tid. The requested HTML page number is
- provided by the htquery->page field, and the resultant data is stored
- in the buffer pointed to by htquery->resbuf. If there is an HTTP query
- string that is to be sent to the device, it should be sent in the buffer
- pointed to by htquery->qbuf. If there is no query string, this field
- should be set to NULL. The actual size of the reply received is written
- into *(htquery->reslen).
-
- RETURNS
-
- This function returns 0 if no error occur. If an error occurs, -1
- is returned and errno is set appropriately:
-
- EFAULT Invalid user space pointer was passed
- ENXIO Invalid IOP number
- ENOBUFS Buffer not large enough. If this occurs, the required
- buffer length is written into *(ops->reslen)
- ETIMEDOUT Timeout waiting for reply message
- ENOMEM Kernel memory allocation error
-
-XII. Events
-
- In the process of determining this. Current idea is to have use
- the select() interface to allow user apps to periodically poll
- the /dev/i2o/ctl device for events. When select() notifies the user
- that an event is available, the user would call read() to retrieve
- a list of all the events that are pending for the specific device.
-
-=============================================================================
-Revision History
-=============================================================================
-
-Rev 0.1 - 04/01/99
-- Initial revision
-
-Rev 0.2 - 04/06/99
-- Changed return values to match UNIX ioctl() standard. Only return values
- are 0 and -1. All errors are reported through errno.
-- Added summary of proposed possible event interfaces
-
-Rev 0.3 - 04/20/99
-- Changed all ioctls() to use pointers to user data instead of actual data
-- Updated error values to match the code