diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 402 |
1 files changed, 319 insertions, 83 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 85be64579fc9..aace5766b38a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -20,6 +20,18 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ADP5585 + tristate "Analog Devices ADP5585 keypad decoder and I/O expander driver" + select MFD_CORE + select REGMAP_I2C + depends on I2C + depends on OF + help + Say yes here to add support for the Analog Devices ADP5585 GPIO + expander, PWM and keypad controller. This includes the I2C driver and + the core APIs _only_, you have to select individual components like + the GPIO and PWM functions under the corresponding menus. + config MFD_ALTERA_A10SR bool "Altera Arria10 DevKit System Resource chip" depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF @@ -33,7 +45,8 @@ config MFD_ALTERA_A10SR config MFD_ALTERA_SYSMGR bool "Altera SOCFPGA System Manager" - depends on ARCH_INTEL_SOCFPGA && OF + depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST + depends on OF select MFD_SYSCON help Select this to get System Manager support for all Altera branded @@ -117,6 +130,7 @@ config MFD_AAT2870_CORE select MFD_CORE depends on I2C=y depends on GPIOLIB || COMPILE_TEST + depends on GPIOLIB_LEGACY help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, @@ -126,7 +140,7 @@ config MFD_AAT2870_CORE config MFD_AT91_USART tristate "AT91 USART Driver" select MFD_CORE - depends on ARCH_AT91 || COMPILE_TEST + depends on ARCH_MICROCHIP || COMPILE_TEST help Select this to get support for AT91 USART IP. This is a wrapper over at91-usart-serial driver and usart-spi-driver. Only one function @@ -224,6 +238,18 @@ config MFD_AXP20X_RSB components like regulators or the PEK (Power Enable Key) under the corresponding menus. +config MFD_CGBC + tristate "Congatec Board Controller" + select MFD_CORE + depends on X86 + help + This is the core driver of the Board Controller found on some Congatec + SMARC modules. The Board Controller provides functions like watchdog, + I2C busses, and GPIO controller. + + To compile this driver as a module, choose M here: the module will be + called cgbc-core. + config MFD_CROS_EC_DEV tristate "ChromeOS Embedded Controller multifunction device" select MFD_CORE @@ -237,10 +263,41 @@ config MFD_CROS_EC_DEV To compile this driver as a module, choose M here: the module will be called cros-ec-dev. +config MFD_CS40L50_CORE + tristate + select MFD_CORE + select FW_CS_DSP + select REGMAP_IRQ + +config MFD_CS40L50_I2C + tristate "Cirrus Logic CS40L50 (I2C)" + select REGMAP_I2C + select MFD_CS40L50_CORE + depends on I2C + help + Select this to support the Cirrus Logic CS40L50 Haptic + Driver over I2C. + + This driver can be built as a module. If built as a module it will be + called "cs40l50-i2c". + +config MFD_CS40L50_SPI + tristate "Cirrus Logic CS40L50 (SPI)" + select REGMAP_SPI + select MFD_CS40L50_CORE + depends on SPI + help + Select this to support the Cirrus Logic CS40L50 Haptic + Driver over SPI. + + This driver can be built as a module. If built as a module it will be + called "cs40l50-spi". + config MFD_CS42L43 tristate select MFD_CORE select REGMAP + select REGMAP_IRQ config MFD_CS42L43_I2C tristate "Cirrus Logic CS42L43 (I2C)" @@ -260,6 +317,32 @@ config MFD_CS42L43_SDW Select this to support the Cirrus Logic CS42L43 PC CODEC with headphone and class D speaker drivers over SoundWire. +config MFD_LOCHNAGAR + bool "Cirrus Logic Lochnagar Audio Development Board" + select MFD_CORE + select REGMAP_I2C + depends on I2C=y && OF + help + Support for Cirrus Logic Lochnagar audio development board. + +config MFD_MACSMC + tristate "Apple Silicon System Management Controller (SMC)" + depends on ARCH_APPLE || COMPILE_TEST + depends on OF + depends on APPLE_RTKIT + select MFD_CORE + help + The System Management Controller (SMC) on Apple Silicon machines is a + piece of hardware that exposes various functionalities such as + temperature sensors, voltage/power meters, shutdown/reboot handling, + GPIOs and more. + + Communication happens via a shared mailbox using the RTKit protocol + which is also used for other co-processors. The SMC protocol then + allows reading and writing many different keys which implement the + various features. The MFD core device handles this protocol and + exposes it to the sub-devices. + config MFD_MADERA tristate "Cirrus Logic Madera codecs" select MFD_CORE @@ -289,16 +372,6 @@ config MFD_MADERA_SPI Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via SPI. -config MFD_MAX5970 - tristate "Maxim 5970/5978 power switch and monitor" - depends on (I2C && OF) - select MFD_SIMPLE_MFD_I2C - help - This driver controls a Maxim 5970/5978 switch via I2C bus. - The MAX5970/5978 is a smart switch with no output regulation, but - fault protection and voltage and current monitoring capabilities. - Also it supports upto 4 indication leds. - config MFD_CS47L15 bool "Cirrus Logic CS47L15" select PINCTRL_CS47L15 @@ -457,7 +530,7 @@ config MFD_EXYNOS_LPASS config MFD_GATEWORKS_GSC tristate "Gateworks System Controller" - depends on (I2C && OF) + depends on I2C && OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -472,7 +545,7 @@ config MFD_GATEWORKS_GSC config MFD_MC13XXX tristate - depends on (SPI_MASTER || I2C) + depends on SPI_MASTER || I2C select MFD_CORE select REGMAP_IRQ help @@ -533,6 +606,22 @@ config MFD_MX25_TSADC i.MX25 processors. They consist of a conversion queue for general purpose ADC and a queue for Touchscreens. +config MFD_PF1550 + tristate "NXP PF1550 PMIC Support" + depends on I2C=y && OF + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for NXP PF1550. This is a companion Power + Management IC with regulators, onkey, and charger control on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + This driver can also be built as a module and if so will be called + pf1550. + config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF @@ -793,6 +882,28 @@ config MFD_88PM860X select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. +config MFD_88PM886_PMIC + bool "Marvell 88PM886 PMIC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + This enables support for Marvell 88PM886 Power Management IC. + This includes the I2C driver and the core APIs _only_, you have to + select individual components like onkey under the corresponding menus. + +config MFD_MAX5970 + tristate "Maxim 5970/5978 power switch and monitor" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + Also it supports upto 4 indication leds. + config MFD_MAX14577 tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" depends on I2C @@ -821,7 +932,7 @@ config MFD_MAX77541 There are regulators and adc. config MFD_MAX77620 - bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" + tristate "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" depends on I2C=y depends on OF select MFD_CORE @@ -879,6 +990,19 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77705 + tristate "Maxim MAX77705 PMIC Support" + depends on I2C + select MFD_CORE + select MFD_SIMPLE_MFD_I2C + help + Say yes here to add support for Maxim Integrated MAX77705 PMIC. + This is a Power Management IC with Charger, safe LDOs, Flash, Haptic + and MUIC controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX77714 tristate "Maxim Semiconductor MAX77714 PMIC Support" depends on I2C @@ -893,6 +1017,26 @@ config MFD_MAX77714 drivers must be enabled in order to use each functionality of the device. +config MFD_MAX77759 + tristate "Maxim Integrated MAX77759 PMIC" + depends on I2C + depends on OF + select IRQ_DOMAIN + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim Integrated MAX77759. + This is a companion Power Management IC for USB Type-C applications + with Battery Charger, Fuel Gauge, temperature sensors, USB Type-C + Port Controller (TCPC), NVMEM, and additional GPIO interfaces. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + To compile this driver as a module, choose M here: the module will be + called max77759. + config MFD_MAX77843 bool "Maxim Semiconductor MAX77843 PMIC Support" depends on I2C=y @@ -1008,6 +1152,21 @@ config MFD_MENF21BMC This driver can also be built as a module. If so the module will be called menf21bmc. +config MFD_NCT6694 + tristate "Nuvoton NCT6694 support" + select MFD_CORE + depends on USB + help + This enables support for the Nuvoton USB device NCT6694, which shares + peripherals. + The Nuvoton NCT6694 is a peripheral expander with 16 GPIO chips, + 6 I2C controllers, 2 CANfd controllers, 2 Watchdog timers, ADC, + PWM, and RTC. + This driver provides core APIs to access the NCT6694 hardware + monitoring and control features. + Additional drivers must be enabled to utilize the specific + functionalities of the device. + config MFD_OCELOT tristate "Microsemi Ocelot External Control Support" depends on SPI_MASTER @@ -1082,33 +1241,9 @@ config MFD_RETU Retu and Tahvo are a multi-function devices found on Nokia Internet Tablets (770, N800 and N810). -config MFD_PCF50633 - tristate "NXP PCF50633" - depends on I2C - select REGMAP_I2C - help - Say yes here if you have NXP PCF50633 chip on your board. - This core driver provides register access and IRQ handling - facilities, and registers devices for the various functions - so that function-specific drivers can bind to them. - -config PCF50633_ADC - tristate "NXP PCF50633 ADC" - depends on MFD_PCF50633 - help - Say yes here if you want to include support for ADC in the - NXP PCF50633 chip. - -config PCF50633_GPIO - tristate "NXP PCF50633 GPIO" - depends on MFD_PCF50633 - help - Say yes here if you want to include support GPIO for pins on - the PCF50633 chip. - config MFD_PM8XXX tristate "Qualcomm PM8xxx PMIC chips driver" - depends on (ARM || HEXAGON || COMPILE_TEST) + depends on ARM || HEXAGON || COMPILE_TEST select IRQ_DOMAIN_HIERARCHY select MFD_CORE select REGMAP @@ -1136,6 +1271,18 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_SPACEMIT_P1 + tristate "SpacemiT P1 PMIC" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This option supports the I2C-based SpacemiT P1 PMIC, which + contains regulators, a power switch, GPIOs, an RTC, and more. + This option is selected when any of the supported sub-devices + is configured. The basic functionality is implemented by the + simple MFD I2C driver. + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST @@ -1220,11 +1367,11 @@ config MFD_RC5T583 different functionality of the device. config MFD_RK8XX - bool + tristate select MFD_CORE config MFD_RK8XX_I2C - tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip" + tristate "Rockchip RK805/RK808/RK809/RK816/RK817/RK818 Power Management Chip" depends on I2C && OF select MFD_CORE select REGMAP_I2C @@ -1232,7 +1379,7 @@ config MFD_RK8XX_I2C select MFD_RK8XX help If you say yes here you get support for the RK805, RK808, RK809, - RK817 and RK818 Power Management chips. + RK816, RK817 and RK818 Power Management chips. This driver provides common support for accessing the device through I2C interface. The device supports multiple sub-devices including interrupts, RTC, LDO & DCDC regulators, and onkey. @@ -1266,21 +1413,42 @@ config MFD_RN5T618 functionality of the device. config MFD_SEC_CORE - tristate "Samsung Electronics PMIC Series Support" + tristate + select MFD_CORE + select REGMAP_IRQ + +config MFD_SEC_ACPM + tristate "Samsung Electronics S2MPG1x PMICs" + depends on EXYNOS_ACPM_PROTOCOL + depends on OF + select MFD_SEC_CORE + help + Support for the Samsung Electronics PMICs with ACPM interface. + This is a Power Management IC for mobile applications with buck + converters, various LDOs, power meters, RTC, clock outputs, and + additional GPIOs interfaces. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + To compile this driver as a module, choose M here: the module will be + called sec-acpm. + +config MFD_SEC_I2C + tristate "Samsung Electronics S2MPA/S2MPS1X/S2MPU/S5M series PMICs" depends on I2C=y depends on OF - select MFD_CORE + select MFD_SEC_CORE select REGMAP_I2C - select REGMAP_IRQ help - Support for the Samsung Electronics PMIC devices coming - usually along with Samsung Exynos SoC chipset. + Support for the Samsung Electronics PMIC devices with I2C interface + coming usually along with Samsung Exynos SoC chipset. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality - of the device + of the device. To compile this driver as a module, choose M here: the - module will be called sec-core. + module will be called sec-i2c. Have in mind that important core drivers (like regulators) depend on this driver so building this as a module might require proper initial ramdisk or might not boot up as well in certain scenarios. @@ -1288,6 +1456,7 @@ config MFD_SEC_CORE config MFD_SI476X_CORE tristate "Silicon Laboratories 4761/64/68 AM/FM radio." depends on I2C + depends on GPIOLIB_LEGACY select MFD_CORE select REGMAP_I2C help @@ -1371,8 +1540,9 @@ config MFD_SC27XX_PMIC and it also adds the irq_chip parts for handling the PMIC chip events. config RZ_MTU3 - bool "Renesas RZ/G2L MTU3a core driver" + tristate "Renesas RZ/G2L MTU3a core driver" depends on (ARCH_RZG2L && OF) || COMPILE_TEST + select MFD_CORE help Select this option to enable Renesas RZ/G2L MTU3a core driver for the Multi-Function Timer Pulse Unit 3 (MTU3a) hardware available @@ -1415,8 +1585,8 @@ config MFD_DB8500_PRCMU through a register map. config MFD_STMPE - bool "STMicroelectronics STMPE" - depends on (I2C=y || SPI_MASTER=y) + tristate "STMicroelectronics STMPE" + depends on I2C || SPI_MASTER depends on OF select MFD_CORE help @@ -1444,25 +1614,19 @@ menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C - bool "STMicroelectronics STMPE I2C Interface" - depends on I2C=y + tristate "STMicroelectronics STMPE I2C Interface" + depends on I2C default y help This is used to enable I2C interface of STMPE config STMPE_SPI - bool "STMicroelectronics STMPE SPI Interface" + tristate "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE endmenu -config MFD_STA2X11 - bool "STMicroelectronics STA2X11" - depends on STA2X11 - select MFD_CORE - select REGMAP_MMIO - config MFD_SUN6I_PRCM bool "Allwinner A31/A23/A33 PRCM controller" depends on ARCH_SUNXI || COMPILE_TEST @@ -1481,6 +1645,7 @@ config MFD_SYSCON config MFD_TI_AM335X_TSCADC tristate "TI ADC / Touch Screen chip support" + depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST select MFD_CORE select REGMAP select REGMAP_MMIO @@ -1522,6 +1687,17 @@ config MFD_TI_LMU LM36274. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. +config MFD_BQ257XX + tristate "TI BQ257XX Buck/Boost Charge Controller" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support Texas Instruments BQ25703 Buck/Boost converter with + charge controller. It consists of regulators that provide + system voltage and OTG voltage, and a charger manager for + batteries containing one or more cells. + config MFD_OMAP_USB_HOST bool "TI OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 @@ -1770,6 +1946,7 @@ config TWL4030_CORE bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y select IRQ_DOMAIN + select MFD_CORE select REGMAP_I2C help Say yes here if you have TWL4030 / TWL6030 family chip on your board. @@ -1825,16 +2002,6 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. -config MFD_WL1273_CORE - tristate "TI WL1273 FM radio" - depends on I2C - select MFD_CORE - default n - help - This is the core driver for the TI WL1273 FM radio. This MFD - driver connects the radio-wl1273 V4L2 module and the wl1273 - audio codec. - config MFD_LM3533 tristate "TI/National Semiconductor LM3533 Lighting Power chip" depends on I2C @@ -1857,7 +2024,7 @@ config MFD_TIMBERDALE multifunction device which exposes numerous platform devices. The timberdale FPGA can be found on the Intel Atom development board - for in-vehicle infontainment, called Russellville. + for in-vehicle infotainment, called Russellville. config MFD_TC3589X bool "Toshiba TC35892 and variants" @@ -1888,14 +2055,6 @@ config MFD_VX855 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi and/or vx855_gpio drivers for this to do anything useful. -config MFD_LOCHNAGAR - bool "Cirrus Logic Lochnagar Audio Development Board" - select MFD_CORE - select REGMAP_I2C - depends on I2C=y && OF - help - Support for Cirrus Logic Lochnagar audio development board. - config MFD_ARIZONA select REGMAP select REGMAP_IRQ @@ -2085,6 +2244,19 @@ config MFD_ROHM_BD957XMUF BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily designed to be used to power R-Car series processors. +config MFD_ROHM_BD96801 + tristate "ROHM BD96801 Power Management IC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Select this option to get support for the ROHM BD96801 Power + Management IC. The ROHM BD96801 is a highly scalable Power Management + IC for industrial and automotive use. The BD96801 can be used as a + master PMIC in a chained PMIC solution with suitable companion PMICs. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST @@ -2112,7 +2284,7 @@ config MFD_STM32_TIMERS config MFD_STPMIC1 tristate "Support for STPMIC1 PMIC" - depends on (I2C=y && OF) + depends on I2C=y && OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -2204,6 +2376,7 @@ config MFD_ACER_A500_EC config MFD_QCOM_PM8008 tristate "QCOM PM8008 Power Management IC" depends on I2C && OF + select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help @@ -2253,7 +2426,7 @@ config MFD_VEXPRESS_SYSREG config RAVE_SP_CORE tristate "RAVE SP MCU core driver" depends on SERIAL_DEV_BUS - select CRC_CCITT + select CRC_ITU_T help Select this to get support for the Supervisory Processor device found on several devices in RAVE line of hardware. @@ -2302,6 +2475,43 @@ config MFD_INTEL_M10_BMC_PMCI additional drivers must be enabled in order to use the functionality of the device. +config MFD_LOONGSON_SE + tristate "Loongson Security Engine chip controller driver" + depends on LOONGARCH && ACPI + select MFD_CORE + help + The Loongson Security Engine chip supports RNG, SM2, SM3 and + SM4 accelerator engines. Each engine have its own DMA buffer + provided by the controller. The kernel cannot directly send + commands to the engine and must first send them to the controller, + which will forward them to the corresponding engine. + +config MFD_LS2K_BMC_CORE + bool "Loongson-2K Board Management Controller Support" + depends on PCI && ACPI_GENERIC_GSI + select MFD_CORE + help + Say yes here to add support for the Loongson-2K BMC which is a Board + Management Controller connected to the PCIe bus. The device supports + multiple sub-devices like display and IPMI. This driver provides common + support for accessing the devices. + + The display is enabled by default in the driver, while the IPMI interface + is enabled independently through the IPMI_LS2K option in the IPMI section. + +config MFD_QNAP_MCU + tristate "QNAP microcontroller unit core driver" + depends on SERIAL_DEV_BUS + select MFD_CORE + help + Select this to get support for the QNAP MCU device found in + several devices of QNAP network attached storage products that + implements additional functionality for the device, like fan + and LED control. + + This driver implements the base serial protocol to talk to the + device and provides functions for the other parts to hook into. + config MFD_RSMU_I2C tristate "Renesas Synchronization Management Unit with I2C" depends on I2C && OF @@ -2330,5 +2540,31 @@ config MFD_RSMU_SPI Additional drivers must be enabled in order to use the functionality of the device. +config MFD_UPBOARD_FPGA + tristate "Support for the AAeon UP board FPGA" + depends on (X86 && ACPI) + select MFD_CORE + help + Select this option to enable the AAEON UP and UP^2 onboard FPGA. + This is the core driver of this FPGA, which has a pin controller and a + LED controller. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + +config MFD_MAX7360 + tristate "Maxim MAX7360 I2C IO Expander" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim MAX7360 device, embedding + keypad, rotary encoder, PWM and GPIO features. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + endmenu endif |