diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 585 |
1 files changed, 443 insertions, 142 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 30db49f31866..aace5766b38a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -15,10 +15,23 @@ config MFD_CS5535 tristate "AMD CS5535 and CS5536 southbridge core functions" select MFD_CORE depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) + depends on !UML help This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ADP5585 + tristate "Analog Devices ADP5585 keypad decoder and I/O expander driver" + select MFD_CORE + select REGMAP_I2C + depends on I2C + depends on OF + help + Say yes here to add support for the Analog Devices ADP5585 GPIO + expander, PWM and keypad controller. This includes the I2C driver and + the core APIs _only_, you have to select individual components like + the GPIO and PWM functions under the corresponding menus. + config MFD_ALTERA_A10SR bool "Altera Arria10 DevKit System Resource chip" depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF @@ -32,7 +45,8 @@ config MFD_ALTERA_A10SR config MFD_ALTERA_SYSMGR bool "Altera SOCFPGA System Manager" - depends on ARCH_INTEL_SOCFPGA && OF + depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST + depends on OF select MFD_SYSCON help Select this to get System Manager support for all Altera branded @@ -116,6 +130,7 @@ config MFD_AAT2870_CORE select MFD_CORE depends on I2C=y depends on GPIOLIB || COMPILE_TEST + depends on GPIOLIB_LEGACY help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, @@ -125,7 +140,7 @@ config MFD_AAT2870_CORE config MFD_AT91_USART tristate "AT91 USART Driver" select MFD_CORE - depends on ARCH_AT91 || COMPILE_TEST + depends on ARCH_MICROCHIP || COMPILE_TEST help Select this to get support for AT91 USART IP. This is a wrapper over at91-usart-serial driver and usart-spi-driver. Only one function @@ -223,6 +238,18 @@ config MFD_AXP20X_RSB components like regulators or the PEK (Power Enable Key) under the corresponding menus. +config MFD_CGBC + tristate "Congatec Board Controller" + select MFD_CORE + depends on X86 + help + This is the core driver of the Board Controller found on some Congatec + SMARC modules. The Board Controller provides functions like watchdog, + I2C busses, and GPIO controller. + + To compile this driver as a module, choose M here: the module will be + called cgbc-core. + config MFD_CROS_EC_DEV tristate "ChromeOS Embedded Controller multifunction device" select MFD_CORE @@ -236,6 +263,86 @@ config MFD_CROS_EC_DEV To compile this driver as a module, choose M here: the module will be called cros-ec-dev. +config MFD_CS40L50_CORE + tristate + select MFD_CORE + select FW_CS_DSP + select REGMAP_IRQ + +config MFD_CS40L50_I2C + tristate "Cirrus Logic CS40L50 (I2C)" + select REGMAP_I2C + select MFD_CS40L50_CORE + depends on I2C + help + Select this to support the Cirrus Logic CS40L50 Haptic + Driver over I2C. + + This driver can be built as a module. If built as a module it will be + called "cs40l50-i2c". + +config MFD_CS40L50_SPI + tristate "Cirrus Logic CS40L50 (SPI)" + select REGMAP_SPI + select MFD_CS40L50_CORE + depends on SPI + help + Select this to support the Cirrus Logic CS40L50 Haptic + Driver over SPI. + + This driver can be built as a module. If built as a module it will be + called "cs40l50-spi". + +config MFD_CS42L43 + tristate + select MFD_CORE + select REGMAP + select REGMAP_IRQ + +config MFD_CS42L43_I2C + tristate "Cirrus Logic CS42L43 (I2C)" + depends on I2C + select REGMAP_I2C + select MFD_CS42L43 + help + Select this to support the Cirrus Logic CS42L43 PC CODEC with + headphone and class D speaker drivers over I2C. + +config MFD_CS42L43_SDW + tristate "Cirrus Logic CS42L43 (SoundWire)" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + select MFD_CS42L43 + help + Select this to support the Cirrus Logic CS42L43 PC CODEC with + headphone and class D speaker drivers over SoundWire. + +config MFD_LOCHNAGAR + bool "Cirrus Logic Lochnagar Audio Development Board" + select MFD_CORE + select REGMAP_I2C + depends on I2C=y && OF + help + Support for Cirrus Logic Lochnagar audio development board. + +config MFD_MACSMC + tristate "Apple Silicon System Management Controller (SMC)" + depends on ARCH_APPLE || COMPILE_TEST + depends on OF + depends on APPLE_RTKIT + select MFD_CORE + help + The System Management Controller (SMC) on Apple Silicon machines is a + piece of hardware that exposes various functionalities such as + temperature sensors, voltage/power meters, shutdown/reboot handling, + GPIOs and more. + + Communication happens via a shared mailbox using the RTKit protocol + which is also used for other co-processors. The SMC protocol then + allows reading and writing many different keys which implement the + various features. The MFD core device handles this protocol and + exposes it to the sub-devices. + config MFD_MADERA tristate "Cirrus Logic Madera codecs" select MFD_CORE @@ -300,15 +407,6 @@ config MFD_CS47L92 help Support for Cirrus Logic CS42L92, CS47L92 and CS47L93 Smart Codecs -config MFD_ASIC3 - bool "Compaq ASIC3" - depends on GPIOLIB - depends on ARM || COMPILE_TEST - select MFD_CORE - help - This driver supports the ASIC3 multifunction chip found on many - PDAs (mainly iPAQ and HTC based ones) - config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y @@ -361,9 +459,6 @@ config MFD_DA9055 Additional drivers must be enabled in order to use the functionality of the device. - This driver can be built as a module. If built as a module it will be - called "da9055" - config MFD_DA9062 tristate "Dialog Semiconductor DA9062/61 PMIC Support" select MFD_CORE @@ -435,7 +530,7 @@ config MFD_EXYNOS_LPASS config MFD_GATEWORKS_GSC tristate "Gateworks System Controller" - depends on (I2C && OF) + depends on I2C && OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -450,7 +545,7 @@ config MFD_GATEWORKS_GSC config MFD_MC13XXX tristate - depends on (SPI_MASTER || I2C) + depends on SPI_MASTER || I2C select MFD_CORE select REGMAP_IRQ help @@ -511,6 +606,22 @@ config MFD_MX25_TSADC i.MX25 processors. They consist of a conversion queue for general purpose ADC and a queue for Touchscreens. +config MFD_PF1550 + tristate "NXP PF1550 PMIC Support" + depends on I2C=y && OF + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for NXP PF1550. This is a companion Power + Management IC with regulators, onkey, and charger control on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + This driver can also be built as a module and if so will be called + pf1550. + config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF @@ -550,15 +661,6 @@ config MFD_HI655X_PMIC help Select this option to enable Hisilicon hi655x series pmic driver. -config HTC_PASIC3 - tristate "HTC PASIC3 LED/DS1WM chip support" - select MFD_CORE - help - This core driver provides register access for the LED/DS1WM - chips labeled "AIC2" and "AIC3", found on HTC Blueangel and - HTC Magician devices, respectively. Actual functionality is - handled by the leds-pasic3 and ds1wm drivers. - config MFD_INTEL_QUARK_I2C_GPIO tristate "Intel Quark MFD I2C GPIO" depends on PCI @@ -702,7 +804,7 @@ config MFD_INTEL_PMC_BXT config MFD_IPAQ_MICRO bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" - depends on SA1100_H3100 || SA1100_H3600 + depends on SA1100_H3600 select MFD_CORE help Select this to get support for the Microcontroller found in @@ -780,6 +882,28 @@ config MFD_88PM860X select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. +config MFD_88PM886_PMIC + bool "Marvell 88PM886 PMIC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + This enables support for Marvell 88PM886 Power Management IC. + This includes the I2C driver and the core APIs _only_, you have to + select individual components like onkey under the corresponding menus. + +config MFD_MAX5970 + tristate "Maxim 5970/5978 power switch and monitor" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + Also it supports upto 4 indication leds. + config MFD_MAX14577 tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" depends on I2C @@ -794,8 +918,21 @@ config MFD_MAX14577 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77541 + tristate "Analog Devices MAX77541/77540 PMIC Support" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Analog Devices MAX77541 and + MAX77540 Power Management ICs. This driver provides + common support for accessing the device; additional drivers + must be enabled in order to use the functionality of the device. + There are regulators and adc. + config MFD_MAX77620 - bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" + tristate "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" depends on I2C=y depends on OF select MFD_CORE @@ -853,6 +990,19 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77705 + tristate "Maxim MAX77705 PMIC Support" + depends on I2C + select MFD_CORE + select MFD_SIMPLE_MFD_I2C + help + Say yes here to add support for Maxim Integrated MAX77705 PMIC. + This is a Power Management IC with Charger, safe LDOs, Flash, Haptic + and MUIC controls on chip. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + config MFD_MAX77714 tristate "Maxim Semiconductor MAX77714 PMIC Support" depends on I2C @@ -867,6 +1017,26 @@ config MFD_MAX77714 drivers must be enabled in order to use each functionality of the device. +config MFD_MAX77759 + tristate "Maxim Integrated MAX77759 PMIC" + depends on I2C + depends on OF + select IRQ_DOMAIN + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim Integrated MAX77759. + This is a companion Power Management IC for USB Type-C applications + with Battery Charger, Fuel Gauge, temperature sensors, USB Type-C + Port Controller (TCPC), NVMEM, and additional GPIO interfaces. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + To compile this driver as a module, choose M here: the module will be + called max77759. + config MFD_MAX77843 bool "Maxim Semiconductor MAX77843 PMIC Support" depends on I2C=y @@ -982,6 +1152,21 @@ config MFD_MENF21BMC This driver can also be built as a module. If so the module will be called menf21bmc. +config MFD_NCT6694 + tristate "Nuvoton NCT6694 support" + select MFD_CORE + depends on USB + help + This enables support for the Nuvoton USB device NCT6694, which shares + peripherals. + The Nuvoton NCT6694 is a peripheral expander with 16 GPIO chips, + 6 I2C controllers, 2 CANfd controllers, 2 Watchdog timers, ADC, + PWM, and RTC. + This driver provides core APIs to access the NCT6694 hardware + monitoring and control features. + Additional drivers must be enabled to utilize the specific + functionalities of the device. + config MFD_OCELOT tristate "Microsemi Ocelot External Control Support" depends on SPI_MASTER @@ -1056,44 +1241,9 @@ config MFD_RETU Retu and Tahvo are a multi-function devices found on Nokia Internet Tablets (770, N800 and N810). -config MFD_PCF50633 - tristate "NXP PCF50633" - depends on I2C - select REGMAP_I2C - help - Say yes here if you have NXP PCF50633 chip on your board. - This core driver provides register access and IRQ handling - facilities, and registers devices for the various functions - so that function-specific drivers can bind to them. - -config PCF50633_ADC - tristate "NXP PCF50633 ADC" - depends on MFD_PCF50633 - help - Say yes here if you want to include support for ADC in the - NXP PCF50633 chip. - -config PCF50633_GPIO - tristate "NXP PCF50633 GPIO" - depends on MFD_PCF50633 - help - Say yes here if you want to include support GPIO for pins on - the PCF50633 chip. - -config UCB1400_CORE - tristate "Philips UCB1400 Core driver" - depends on AC97_BUS - depends on GPIOLIB - help - This enables support for the Philips UCB1400 core functions. - The UCB1400 is an AC97 audio codec. - - To compile this driver as a module, choose M here: the - module will be called ucb1400_core. - config MFD_PM8XXX tristate "Qualcomm PM8xxx PMIC chips driver" - depends on (ARM || HEXAGON || COMPILE_TEST) + depends on ARM || HEXAGON || COMPILE_TEST select IRQ_DOMAIN_HIERARCHY select MFD_CORE select REGMAP @@ -1121,6 +1271,18 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_SPACEMIT_P1 + tristate "SpacemiT P1 PMIC" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This option supports the I2C-based SpacemiT P1 PMIC, which + contains regulators, a power switch, GPIOs, an RTC, and more. + This option is selected when any of the supported sub-devices + is configured. The basic functionality is implemented by the + simple MFD I2C driver. + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST @@ -1204,19 +1366,38 @@ config MFD_RC5T583 Additional drivers must be enabled in order to use the different functionality of the device. -config MFD_RK808 - tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip" +config MFD_RK8XX + tristate + select MFD_CORE + +config MFD_RK8XX_I2C + tristate "Rockchip RK805/RK808/RK809/RK816/RK817/RK818 Power Management Chip" depends on I2C && OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ + select MFD_RK8XX help If you say yes here you get support for the RK805, RK808, RK809, - RK817 and RK818 Power Management chips. + RK816, RK817 and RK818 Power Management chips. This driver provides common support for accessing the device through I2C interface. The device supports multiple sub-devices including interrupts, RTC, LDO & DCDC regulators, and onkey. +config MFD_RK8XX_SPI + tristate "Rockchip RK806 Power Management Chip" + depends on SPI && OF + select MFD_CORE + select REGMAP_SPI + select REGMAP_IRQ + select MFD_RK8XX + help + If you say yes here you get support for the RK806 Power Management + chip. + This driver provides common support for accessing the device + through an SPI interface. The device supports multiple sub-devices + including interrupts, LDO & DCDC regulators, and power on-key. + config MFD_RN5T618 tristate "Ricoh RN5T567/618 PMIC" depends on I2C @@ -1232,21 +1413,42 @@ config MFD_RN5T618 functionality of the device. config MFD_SEC_CORE - tristate "Samsung Electronics PMIC Series Support" + tristate + select MFD_CORE + select REGMAP_IRQ + +config MFD_SEC_ACPM + tristate "Samsung Electronics S2MPG1x PMICs" + depends on EXYNOS_ACPM_PROTOCOL + depends on OF + select MFD_SEC_CORE + help + Support for the Samsung Electronics PMICs with ACPM interface. + This is a Power Management IC for mobile applications with buck + converters, various LDOs, power meters, RTC, clock outputs, and + additional GPIOs interfaces. + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + + To compile this driver as a module, choose M here: the module will be + called sec-acpm. + +config MFD_SEC_I2C + tristate "Samsung Electronics S2MPA/S2MPS1X/S2MPU/S5M series PMICs" depends on I2C=y depends on OF - select MFD_CORE + select MFD_SEC_CORE select REGMAP_I2C - select REGMAP_IRQ help - Support for the Samsung Electronics PMIC devices coming - usually along with Samsung Exynos SoC chipset. + Support for the Samsung Electronics PMIC devices with I2C interface + coming usually along with Samsung Exynos SoC chipset. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality - of the device + of the device. To compile this driver as a module, choose M here: the - module will be called sec-core. + module will be called sec-i2c. Have in mind that important core drivers (like regulators) depend on this driver so building this as a module might require proper initial ramdisk or might not boot up as well in certain scenarios. @@ -1254,6 +1456,7 @@ config MFD_SEC_CORE config MFD_SI476X_CORE tristate "Silicon Laboratories 4761/64/68 AM/FM radio." depends on I2C + depends on GPIOLIB_LEGACY select MFD_CORE select REGMAP_I2C help @@ -1336,6 +1539,17 @@ config MFD_SC27XX_PMIC This driver provides common support for accessing the SC27xx PMICs, and it also adds the irq_chip parts for handling the PMIC chip events. +config RZ_MTU3 + tristate "Renesas RZ/G2L MTU3a core driver" + depends on (ARCH_RZG2L && OF) || COMPILE_TEST + select MFD_CORE + help + Select this option to enable Renesas RZ/G2L MTU3a core driver for + the Multi-Function Timer Pulse Unit 3 (MTU3a) hardware available + on SoCs from Renesas. The core driver shares the clk and channel + register access for the other child devices like Counter, PWM, + Clock Source, and Clock event. + config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" depends on ARCH_U8500 || COMPILE_TEST @@ -1371,8 +1585,8 @@ config MFD_DB8500_PRCMU through a register map. config MFD_STMPE - bool "STMicroelectronics STMPE" - depends on (I2C=y || SPI_MASTER=y) + tristate "STMicroelectronics STMPE" + depends on I2C || SPI_MASTER depends on OF select MFD_CORE help @@ -1400,25 +1614,19 @@ menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C - bool "STMicroelectronics STMPE I2C Interface" - depends on I2C=y + tristate "STMicroelectronics STMPE I2C Interface" + depends on I2C default y help This is used to enable I2C interface of STMPE config STMPE_SPI - bool "STMicroelectronics STMPE SPI Interface" + tristate "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE endmenu -config MFD_STA2X11 - bool "STMicroelectronics STA2X11" - depends on STA2X11 - select MFD_CORE - select REGMAP_MMIO - config MFD_SUN6I_PRCM bool "Allwinner A31/A23/A33 PRCM controller" depends on ARCH_SUNXI || COMPILE_TEST @@ -1437,6 +1645,7 @@ config MFD_SYSCON config MFD_TI_AM335X_TSCADC tristate "TI ADC / Touch Screen chip support" + depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST select MFD_CORE select REGMAP select REGMAP_MMIO @@ -1478,6 +1687,17 @@ config MFD_TI_LMU LM36274. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. +config MFD_BQ257XX + tristate "TI BQ257XX Buck/Boost Charge Controller" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Support Texas Instruments BQ25703 Buck/Boost converter with + charge controller. It consists of regulators that provide + system voltage and OTG voltage, and a charger manager for + batteries containing one or more cells. + config MFD_OMAP_USB_HOST bool "TI OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 @@ -1514,7 +1734,7 @@ config TPS6105X config TPS65010 tristate "TI TPS6501x Power Management chips" depends on I2C && GPIOLIB - default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + default MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of Power Management chips. These include voltage regulators, @@ -1690,10 +1910,43 @@ config MFD_TPS65912_SPI If you say yes here you get support for the TPS65912 series of PM chips with SPI interface. +config MFD_TPS6594 + tristate + select MFD_CORE + select REGMAP + select REGMAP_IRQ + +config MFD_TPS6594_I2C + tristate "TI TPS6594 Power Management chip with I2C" + select MFD_TPS6594 + select REGMAP_I2C + select CRC8 + depends on I2C + help + If you say yes here you get support for the TPS6594 series of + PM chips with I2C interface. + + This driver can also be built as a module. If so, the module + will be called tps6594-i2c. + +config MFD_TPS6594_SPI + tristate "TI TPS6594 Power Management chip with SPI" + select MFD_TPS6594 + select REGMAP_SPI + select CRC8 + depends on SPI_MASTER + help + If you say yes here you get support for the TPS6594 series of + PM chips with SPI interface. + + This driver can also be built as a module. If so, the module + will be called tps6594-spi. + config TWL4030_CORE bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y select IRQ_DOMAIN + select MFD_CORE select REGMAP_I2C help Say yes here if you have TWL4030 / TWL6030 family chip on your board. @@ -1749,16 +2002,6 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. -config MFD_WL1273_CORE - tristate "TI WL1273 FM radio" - depends on I2C - select MFD_CORE - default n - help - This is the core driver for the TI WL1273 FM radio. This MFD - driver connects the radio-wl1273 V4L2 module and the wl1273 - audio codec. - config MFD_LM3533 tristate "TI/National Semiconductor LM3533 Lighting Power chip" depends on I2C @@ -1781,7 +2024,7 @@ config MFD_TIMBERDALE multifunction device which exposes numerous platform devices. The timberdale FPGA can be found on the Intel Atom development board - for in-vehicle infontainment, called Russellville. + for in-vehicle infotainment, called Russellville. config MFD_TC3589X bool "Toshiba TC35892 and variants" @@ -1795,35 +2038,6 @@ config MFD_TC3589X additional drivers must be enabled in order to use the functionality of the device. -config MFD_TMIO - bool - default n - -config MFD_T7L66XB - bool "Toshiba T7L66XB" - depends on ARM && HAVE_CLK - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller T7L66XB - -config MFD_TC6387XB - bool "Toshiba TC6387XB" - depends on ARM && HAVE_CLK - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller TC6387XB - -config MFD_TC6393XB - bool "Toshiba TC6393XB" - depends on ARM && HAVE_CLK - select GPIOLIB - select MFD_CORE - select MFD_TMIO - help - Support for Toshiba Mobile IO Controller TC6393XB - config MFD_TQMX86 tristate "TQ-Systems IO controller TQMX86" select MFD_CORE @@ -1841,14 +2055,6 @@ config MFD_VX855 VIA VX855/VX875 south bridge. You will need to enable the vx855_spi and/or vx855_gpio drivers for this to do anything useful. -config MFD_LOCHNAGAR - bool "Cirrus Logic Lochnagar Audio Development Board" - select MFD_CORE - select REGMAP_I2C - depends on I2C=y && OF - help - Support for Cirrus Logic Lochnagar audio development board. - config MFD_ARIZONA select REGMAP select REGMAP_IRQ @@ -2038,6 +2244,19 @@ config MFD_ROHM_BD957XMUF BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily designed to be used to power R-Car series processors. +config MFD_ROHM_BD96801 + tristate "ROHM BD96801 Power Management IC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Select this option to get support for the ROHM BD96801 Power + Management IC. The ROHM BD96801 is a highly scalable Power Management + IC for industrial and automotive use. The BD96801 can be used as a + master PMIC in a chained PMIC solution with suitable companion PMICs. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST @@ -2065,7 +2284,7 @@ config MFD_STM32_TIMERS config MFD_STPMIC1 tristate "Support for STPMIC1 PMIC" - depends on (I2C=y && OF) + depends on I2C=y && OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -2157,6 +2376,7 @@ config MFD_ACER_A500_EC config MFD_QCOM_PM8008 tristate "QCOM PM8008 Power Management IC" depends on I2C && OF + select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help @@ -2206,7 +2426,7 @@ config MFD_VEXPRESS_SYSREG config RAVE_SP_CORE tristate "RAVE SP MCU core driver" depends on SERIAL_DEV_BUS - select CRC_CCITT + select CRC_ITU_T help Select this to get support for the Supervisory Processor device found on several devices in RAVE line of hardware. @@ -2224,19 +2444,74 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. -config MFD_INTEL_M10_BMC - tristate "Intel MAX 10 Board Management Controller" - depends on SPI_MASTER - select REGMAP_SPI_AVMM - select MFD_CORE +config MFD_INTEL_M10_BMC_CORE + tristate + select MFD_CORE + select REGMAP + default n + +config MFD_INTEL_M10_BMC_SPI + tristate "Intel MAX 10 Board Management Controller with SPI" + depends on SPI_MASTER + select MFD_INTEL_M10_BMC_CORE + select REGMAP_SPI_AVMM + help + Support for the Intel MAX 10 board management controller using the + SPI interface. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + +config MFD_INTEL_M10_BMC_PMCI + tristate "Intel MAX 10 Board Management Controller with PMCI" + depends on FPGA_DFL + select MFD_INTEL_M10_BMC_CORE + select REGMAP help - Support for the Intel MAX 10 board management controller using the - SPI interface. + Support for the Intel MAX 10 board management controller via PMCI. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_LOONGSON_SE + tristate "Loongson Security Engine chip controller driver" + depends on LOONGARCH && ACPI + select MFD_CORE + help + The Loongson Security Engine chip supports RNG, SM2, SM3 and + SM4 accelerator engines. Each engine have its own DMA buffer + provided by the controller. The kernel cannot directly send + commands to the engine and must first send them to the controller, + which will forward them to the corresponding engine. + +config MFD_LS2K_BMC_CORE + bool "Loongson-2K Board Management Controller Support" + depends on PCI && ACPI_GENERIC_GSI + select MFD_CORE + help + Say yes here to add support for the Loongson-2K BMC which is a Board + Management Controller connected to the PCIe bus. The device supports + multiple sub-devices like display and IPMI. This driver provides common + support for accessing the devices. + + The display is enabled by default in the driver, while the IPMI interface + is enabled independently through the IPMI_LS2K option in the IPMI section. + +config MFD_QNAP_MCU + tristate "QNAP microcontroller unit core driver" + depends on SERIAL_DEV_BUS + select MFD_CORE + help + Select this to get support for the QNAP MCU device found in + several devices of QNAP network attached storage products that + implements additional functionality for the device, like fan + and LED control. + + This driver implements the base serial protocol to talk to the + device and provides functions for the other parts to hook into. + config MFD_RSMU_I2C tristate "Renesas Synchronization Management Unit with I2C" depends on I2C && OF @@ -2265,5 +2540,31 @@ config MFD_RSMU_SPI Additional drivers must be enabled in order to use the functionality of the device. +config MFD_UPBOARD_FPGA + tristate "Support for the AAeon UP board FPGA" + depends on (X86 && ACPI) + select MFD_CORE + help + Select this option to enable the AAEON UP and UP^2 onboard FPGA. + This is the core driver of this FPGA, which has a pin controller and a + LED controller. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + +config MFD_MAX7360 + tristate "Maxim MAX7360 I2C IO Expander" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim MAX7360 device, embedding + keypad, rotary encoder, PWM and GPIO features. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + endmenu endif |