diff options
Diffstat (limited to 'drivers/misc/habanalabs/include/common/cpucp_if.h')
| -rw-r--r-- | drivers/misc/habanalabs/include/common/cpucp_if.h | 890 |
1 files changed, 0 insertions, 890 deletions
diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h deleted file mode 100644 index 737c39f33f05..000000000000 --- a/drivers/misc/habanalabs/include/common/cpucp_if.h +++ /dev/null @@ -1,890 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright 2020-2021 HabanaLabs, Ltd. - * All Rights Reserved. - * - */ - -#ifndef CPUCP_IF_H -#define CPUCP_IF_H - -#include <linux/types.h> -#include <linux/if_ether.h> - -#include "hl_boot_if.h" - -#define NUM_HBM_PSEUDO_CH 2 -#define NUM_HBM_CH_PER_DEV 8 -#define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_SHIFT 0 -#define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_MASK 0x00000001 -#define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_SHIFT 1 -#define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_MASK 0x00000002 -#define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_SHIFT 2 -#define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_MASK 0x00000004 -#define CPUCP_PKT_HBM_ECC_INFO_DERR_SHIFT 3 -#define CPUCP_PKT_HBM_ECC_INFO_DERR_MASK 0x00000008 -#define CPUCP_PKT_HBM_ECC_INFO_SERR_SHIFT 4 -#define CPUCP_PKT_HBM_ECC_INFO_SERR_MASK 0x00000010 -#define CPUCP_PKT_HBM_ECC_INFO_TYPE_SHIFT 5 -#define CPUCP_PKT_HBM_ECC_INFO_TYPE_MASK 0x00000020 -#define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_SHIFT 6 -#define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_MASK 0x000007C0 - -#define PLL_MAP_MAX_BITS 128 -#define PLL_MAP_LEN (PLL_MAP_MAX_BITS / 8) - -/* - * info of the pkt queue pointers in the first async occurrence - */ -struct cpucp_pkt_sync_err { - __le32 pi; - __le32 ci; -}; - -struct hl_eq_hbm_ecc_data { - /* SERR counter */ - __le32 sec_cnt; - /* DERR counter */ - __le32 dec_cnt; - /* Supplemental Information according to the mask bits */ - __le32 hbm_ecc_info; - /* Address in hbm where the ecc happened */ - __le32 first_addr; - /* SERR continuous address counter */ - __le32 sec_cont_cnt; - __le32 pad; -}; - -/* - * EVENT QUEUE - */ - -struct hl_eq_header { - __le32 reserved; - __le32 ctl; -}; - -struct hl_eq_ecc_data { - __le64 ecc_address; - __le64 ecc_syndrom; - __u8 memory_wrapper_idx; - __u8 pad[7]; -}; - -enum hl_sm_sei_cause { - SM_SEI_SO_OVERFLOW, - SM_SEI_LBW_4B_UNALIGNED, - SM_SEI_AXI_RESPONSE_ERR -}; - -struct hl_eq_sm_sei_data { - __le32 sei_log; - /* enum hl_sm_sei_cause */ - __u8 sei_cause; - __u8 pad[3]; -}; - -enum hl_fw_alive_severity { - FW_ALIVE_SEVERITY_MINOR, - FW_ALIVE_SEVERITY_CRITICAL -}; - -struct hl_eq_fw_alive { - __le64 uptime_seconds; - __le32 process_id; - __le32 thread_id; - /* enum hl_fw_alive_severity */ - __u8 severity; - __u8 pad[7]; -}; - -enum hl_pcie_addr_dec_cause { - PCIE_ADDR_DEC_HBW_ERR_RESP, - PCIE_ADDR_DEC_LBW_ERR_RESP, - PCIE_ADDR_DEC_TLP_BLOCKED_BY_RR -}; - -struct hl_eq_pcie_addr_dec_data { - /* enum hl_pcie_addr_dec_cause */ - __u8 addr_dec_cause; - __u8 pad[7]; -}; - -struct hl_eq_entry { - struct hl_eq_header hdr; - union { - struct hl_eq_ecc_data ecc_data; - struct hl_eq_hbm_ecc_data hbm_ecc_data; - struct hl_eq_sm_sei_data sm_sei_data; - struct cpucp_pkt_sync_err pkt_sync_err; - struct hl_eq_fw_alive fw_alive; - struct hl_eq_pcie_addr_dec_data pcie_addr_dec_data; - __le64 data[7]; - }; -}; - -#define HL_EQ_ENTRY_SIZE sizeof(struct hl_eq_entry) - -#define EQ_CTL_READY_SHIFT 31 -#define EQ_CTL_READY_MASK 0x80000000 - -#define EQ_CTL_EVENT_TYPE_SHIFT 16 -#define EQ_CTL_EVENT_TYPE_MASK 0x0FFF0000 - -#define EQ_CTL_INDEX_SHIFT 0 -#define EQ_CTL_INDEX_MASK 0x0000FFFF - -enum pq_init_status { - PQ_INIT_STATUS_NA = 0, - PQ_INIT_STATUS_READY_FOR_CP, - PQ_INIT_STATUS_READY_FOR_HOST, - PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI, - PQ_INIT_STATUS_LEN_NOT_POWER_OF_TWO_ERR, - PQ_INIT_STATUS_ILLEGAL_Q_ADDR_ERR -}; - -/* - * CpuCP Primary Queue Packets - * - * During normal operation, the host's kernel driver needs to send various - * messages to CpuCP, usually either to SET some value into a H/W periphery or - * to GET the current value of some H/W periphery. For example, SET the - * frequency of MME/TPC and GET the value of the thermal sensor. - * - * These messages can be initiated either by the User application or by the - * host's driver itself, e.g. power management code. In either case, the - * communication from the host's driver to CpuCP will *always* be in - * synchronous mode, meaning that the host will send a single message and poll - * until the message was acknowledged and the results are ready (if results are - * needed). - * - * This means that only a single message can be sent at a time and the host's - * driver must wait for its result before sending the next message. Having said - * that, because these are control messages which are sent in a relatively low - * frequency, this limitation seems acceptable. It's important to note that - * in case of multiple devices, messages to different devices *can* be sent - * at the same time. - * - * The message, inputs/outputs (if relevant) and fence object will be located - * on the device DDR at an address that will be determined by the host's driver. - * During device initialization phase, the host will pass to CpuCP that address. - * Most of the message types will contain inputs/outputs inside the message - * itself. The common part of each message will contain the opcode of the - * message (its type) and a field representing a fence object. - * - * When the host's driver wishes to send a message to CPU CP, it will write the - * message contents to the device DDR, clear the fence object and then write to - * the PSOC_ARC1_AUX_SW_INTR, to issue interrupt 121 to ARC Management CPU. - * - * Upon receiving the interrupt (#121), CpuCP will read the message from the - * DDR. In case the message is a SET operation, CpuCP will first perform the - * operation and then write to the fence object on the device DDR. In case the - * message is a GET operation, CpuCP will first fill the results section on the - * device DDR and then write to the fence object. If an error occurred, CpuCP - * will fill the rc field with the right error code. - * - * In the meantime, the host's driver will poll on the fence object. Once the - * host sees that the fence object is signaled, it will read the results from - * the device DDR (if relevant) and resume the code execution in the host's - * driver. - * - * To use QMAN packets, the opcode must be the QMAN opcode, shifted by 8 - * so the value being put by the host's driver matches the value read by CpuCP - * - * Non-QMAN packets should be limited to values 1 through (2^8 - 1) - * - * Detailed description: - * - * CPUCP_PACKET_DISABLE_PCI_ACCESS - - * After receiving this packet the embedded CPU must NOT issue PCI - * transactions (read/write) towards the Host CPU. This also include - * sending MSI-X interrupts. - * This packet is usually sent before the device is moved to D3Hot state. - * - * CPUCP_PACKET_ENABLE_PCI_ACCESS - - * After receiving this packet the embedded CPU is allowed to issue PCI - * transactions towards the Host CPU, including sending MSI-X interrupts. - * This packet is usually send after the device is moved to D0 state. - * - * CPUCP_PACKET_TEMPERATURE_GET - - * Fetch the current temperature / Max / Max Hyst / Critical / - * Critical Hyst of a specified thermal sensor. The packet's - * arguments specify the desired sensor and the field to get. - * - * CPUCP_PACKET_VOLTAGE_GET - - * Fetch the voltage / Max / Min of a specified sensor. The packet's - * arguments specify the sensor and type. - * - * CPUCP_PACKET_CURRENT_GET - - * Fetch the current / Max / Min of a specified sensor. The packet's - * arguments specify the sensor and type. - * - * CPUCP_PACKET_FAN_SPEED_GET - - * Fetch the speed / Max / Min of a specified fan. The packet's - * arguments specify the sensor and type. - * - * CPUCP_PACKET_PWM_GET - - * Fetch the pwm value / mode of a specified pwm. The packet's - * arguments specify the sensor and type. - * - * CPUCP_PACKET_PWM_SET - - * Set the pwm value / mode of a specified pwm. The packet's - * arguments specify the sensor, type and value. - * - * CPUCP_PACKET_FREQUENCY_SET - - * Set the frequency of a specified PLL. The packet's arguments specify - * the PLL and the desired frequency. The actual frequency in the device - * might differ from the requested frequency. - * - * CPUCP_PACKET_FREQUENCY_GET - - * Fetch the frequency of a specified PLL. The packet's arguments specify - * the PLL. - * - * CPUCP_PACKET_LED_SET - - * Set the state of a specified led. The packet's arguments - * specify the led and the desired state. - * - * CPUCP_PACKET_I2C_WR - - * Write 32-bit value to I2C device. The packet's arguments specify the - * I2C bus, address and value. - * - * CPUCP_PACKET_I2C_RD - - * Read 32-bit value from I2C device. The packet's arguments specify the - * I2C bus and address. - * - * CPUCP_PACKET_INFO_GET - - * Fetch information from the device as specified in the packet's - * structure. The host's driver passes the max size it allows the CpuCP to - * write to the structure, to prevent data corruption in case of - * mismatched driver/FW versions. - * - * CPUCP_PACKET_FLASH_PROGRAM_REMOVED - this packet was removed - * - * CPUCP_PACKET_UNMASK_RAZWI_IRQ - - * Unmask the given IRQ. The IRQ number is specified in the value field. - * The packet is sent after receiving an interrupt and printing its - * relevant information. - * - * CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY - - * Unmask the given IRQs. The IRQs numbers are specified in an array right - * after the cpucp_packet structure, where its first element is the array - * length. The packet is sent after a soft reset was done in order to - * handle any interrupts that were sent during the reset process. - * - * CPUCP_PACKET_TEST - - * Test packet for CpuCP connectivity. The CPU will put the fence value - * in the result field. - * - * CPUCP_PACKET_FREQUENCY_CURR_GET - - * Fetch the current frequency of a specified PLL. The packet's arguments - * specify the PLL. - * - * CPUCP_PACKET_MAX_POWER_GET - - * Fetch the maximal power of the device. - * - * CPUCP_PACKET_MAX_POWER_SET - - * Set the maximal power of the device. The packet's arguments specify - * the power. - * - * CPUCP_PACKET_EEPROM_DATA_GET - - * Get EEPROM data from the CpuCP kernel. The buffer is specified in the - * addr field. The CPU will put the returned data size in the result - * field. In addition, the host's driver passes the max size it allows the - * CpuCP to write to the structure, to prevent data corruption in case of - * mismatched driver/FW versions. - * - * CPUCP_PACKET_NIC_INFO_GET - - * Fetch information from the device regarding the NIC. the host's driver - * passes the max size it allows the CpuCP to write to the structure, to - * prevent data corruption in case of mismatched driver/FW versions. - * - * CPUCP_PACKET_TEMPERATURE_SET - - * Set the value of the offset property of a specified thermal sensor. - * The packet's arguments specify the desired sensor and the field to - * set. - * - * CPUCP_PACKET_VOLTAGE_SET - - * Trigger the reset_history property of a specified voltage sensor. - * The packet's arguments specify the desired sensor and the field to - * set. - * - * CPUCP_PACKET_CURRENT_SET - - * Trigger the reset_history property of a specified current sensor. - * The packet's arguments specify the desired sensor and the field to - * set. - * - * CPUCP_PACKET_PCIE_THROUGHPUT_GET - - * Get throughput of PCIe. - * The packet's arguments specify the transaction direction (TX/RX). - * The window measurement is 10[msec], and the return value is in KB/sec. - * - * CPUCP_PACKET_PCIE_REPLAY_CNT_GET - * Replay count measures number of "replay" events, which is basicly - * number of retries done by PCIe. - * - * CPUCP_PACKET_TOTAL_ENERGY_GET - - * Total Energy is measurement of energy from the time FW Linux - * is loaded. It is calculated by multiplying the average power - * by time (passed from armcp start). The units are in MilliJouls. - * - * CPUCP_PACKET_PLL_INFO_GET - - * Fetch frequencies of PLL from the required PLL IP. - * The packet's arguments specify the device PLL type - * Pll type is the PLL from device pll_index enum. - * The result is composed of 4 outputs, each is 16-bit - * frequency in MHz. - * - * CPUCP_PACKET_POWER_GET - - * Fetch the present power consumption of the device (Current * Voltage). - * - * CPUCP_PACKET_NIC_PFC_SET - - * Enable/Disable the NIC PFC feature. The packet's arguments specify the - * NIC port, relevant lanes to configure and one bit indication for - * enable/disable. - * - * CPUCP_PACKET_NIC_FAULT_GET - - * Fetch the current indication for local/remote faults from the NIC MAC. - * The result is 32-bit value of the relevant register. - * - * CPUCP_PACKET_NIC_LPBK_SET - - * Enable/Disable the MAC loopback feature. The packet's arguments specify - * the NIC port, relevant lanes to configure and one bit indication for - * enable/disable. - * - * CPUCP_PACKET_NIC_MAC_INIT - - * Configure the NIC MAC channels. The packet's arguments specify the - * NIC port and the speed. - * - * CPUCP_PACKET_MSI_INFO_SET - - * set the index number for each supported msi type going from - * host to device - * - * CPUCP_PACKET_NIC_XPCS91_REGS_GET - - * Fetch the un/correctable counters values from the NIC MAC. - * - * CPUCP_PACKET_NIC_STAT_REGS_GET - - * Fetch various NIC MAC counters from the NIC STAT. - * - * CPUCP_PACKET_NIC_STAT_REGS_CLR - - * Clear the various NIC MAC counters in the NIC STAT. - * - * CPUCP_PACKET_NIC_STAT_REGS_ALL_GET - - * Fetch all NIC MAC counters from the NIC STAT. - * - * CPUCP_PACKET_IS_IDLE_CHECK - - * Check if the device is IDLE in regard to the DMA/compute engines - * and QMANs. The f/w will return a bitmask where each bit represents - * a different engine or QMAN according to enum cpucp_idle_mask. - * The bit will be 1 if the engine is NOT idle. - * - * CPUCP_PACKET_HBM_REPLACED_ROWS_INFO_GET - - * Fetch all HBM replaced-rows and prending to be replaced rows data. - * - * CPUCP_PACKET_HBM_PENDING_ROWS_STATUS - - * Fetch status of HBM rows pending replacement and need a reboot to - * be replaced. - * - * CPUCP_PACKET_POWER_SET - - * Resets power history of device to 0 - * - * CPUCP_PACKET_ENGINE_CORE_ASID_SET - - * Packet to perform engine core ASID configuration - */ - -enum cpucp_packet_id { - CPUCP_PACKET_DISABLE_PCI_ACCESS = 1, /* internal */ - CPUCP_PACKET_ENABLE_PCI_ACCESS, /* internal */ - CPUCP_PACKET_TEMPERATURE_GET, /* sysfs */ - CPUCP_PACKET_VOLTAGE_GET, /* sysfs */ - CPUCP_PACKET_CURRENT_GET, /* sysfs */ - CPUCP_PACKET_FAN_SPEED_GET, /* sysfs */ - CPUCP_PACKET_PWM_GET, /* sysfs */ - CPUCP_PACKET_PWM_SET, /* sysfs */ - CPUCP_PACKET_FREQUENCY_SET, /* sysfs */ - CPUCP_PACKET_FREQUENCY_GET, /* sysfs */ - CPUCP_PACKET_LED_SET, /* debugfs */ - CPUCP_PACKET_I2C_WR, /* debugfs */ - CPUCP_PACKET_I2C_RD, /* debugfs */ - CPUCP_PACKET_INFO_GET, /* IOCTL */ - CPUCP_PACKET_FLASH_PROGRAM_REMOVED, - CPUCP_PACKET_UNMASK_RAZWI_IRQ, /* internal */ - CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY, /* internal */ - CPUCP_PACKET_TEST, /* internal */ - CPUCP_PACKET_FREQUENCY_CURR_GET, /* sysfs */ - CPUCP_PACKET_MAX_POWER_GET, /* sysfs */ - CPUCP_PACKET_MAX_POWER_SET, /* sysfs */ - CPUCP_PACKET_EEPROM_DATA_GET, /* sysfs */ - CPUCP_PACKET_NIC_INFO_GET, /* internal */ - CPUCP_PACKET_TEMPERATURE_SET, /* sysfs */ - CPUCP_PACKET_VOLTAGE_SET, /* sysfs */ - CPUCP_PACKET_CURRENT_SET, /* sysfs */ - CPUCP_PACKET_PCIE_THROUGHPUT_GET, /* internal */ - CPUCP_PACKET_PCIE_REPLAY_CNT_GET, /* internal */ - CPUCP_PACKET_TOTAL_ENERGY_GET, /* internal */ - CPUCP_PACKET_PLL_INFO_GET, /* internal */ - CPUCP_PACKET_NIC_STATUS, /* internal */ - CPUCP_PACKET_POWER_GET, /* internal */ - CPUCP_PACKET_NIC_PFC_SET, /* internal */ - CPUCP_PACKET_NIC_FAULT_GET, /* internal */ - CPUCP_PACKET_NIC_LPBK_SET, /* internal */ - CPUCP_PACKET_NIC_MAC_CFG, /* internal */ - CPUCP_PACKET_MSI_INFO_SET, /* internal */ - CPUCP_PACKET_NIC_XPCS91_REGS_GET, /* internal */ - CPUCP_PACKET_NIC_STAT_REGS_GET, /* internal */ - CPUCP_PACKET_NIC_STAT_REGS_CLR, /* internal */ - CPUCP_PACKET_NIC_STAT_REGS_ALL_GET, /* internal */ - CPUCP_PACKET_IS_IDLE_CHECK, /* internal */ - CPUCP_PACKET_HBM_REPLACED_ROWS_INFO_GET,/* internal */ - CPUCP_PACKET_HBM_PENDING_ROWS_STATUS, /* internal */ - CPUCP_PACKET_POWER_SET, /* internal */ - CPUCP_PACKET_RESERVED, /* not used */ - CPUCP_PACKET_ENGINE_CORE_ASID_SET, /* internal */ -}; - -#define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5 - -#define CPUCP_PKT_CTL_RC_SHIFT 12 -#define CPUCP_PKT_CTL_RC_MASK 0x0000F000 - -#define CPUCP_PKT_CTL_OPCODE_SHIFT 16 -#define CPUCP_PKT_CTL_OPCODE_MASK 0x1FFF0000 - -#define CPUCP_PKT_RES_PLL_OUT0_SHIFT 0 -#define CPUCP_PKT_RES_PLL_OUT0_MASK 0x000000000000FFFFull -#define CPUCP_PKT_RES_PLL_OUT1_SHIFT 16 -#define CPUCP_PKT_RES_PLL_OUT1_MASK 0x00000000FFFF0000ull -#define CPUCP_PKT_RES_PLL_OUT2_SHIFT 32 -#define CPUCP_PKT_RES_PLL_OUT2_MASK 0x0000FFFF00000000ull -#define CPUCP_PKT_RES_PLL_OUT3_SHIFT 48 -#define CPUCP_PKT_RES_PLL_OUT3_MASK 0xFFFF000000000000ull - -#define CPUCP_PKT_VAL_PFC_IN1_SHIFT 0 -#define CPUCP_PKT_VAL_PFC_IN1_MASK 0x0000000000000001ull -#define CPUCP_PKT_VAL_PFC_IN2_SHIFT 1 -#define CPUCP_PKT_VAL_PFC_IN2_MASK 0x000000000000001Eull - -#define CPUCP_PKT_VAL_LPBK_IN1_SHIFT 0 -#define CPUCP_PKT_VAL_LPBK_IN1_MASK 0x0000000000000001ull -#define CPUCP_PKT_VAL_LPBK_IN2_SHIFT 1 -#define CPUCP_PKT_VAL_LPBK_IN2_MASK 0x000000000000001Eull - -#define CPUCP_PKT_VAL_MAC_CNT_IN1_SHIFT 0 -#define CPUCP_PKT_VAL_MAC_CNT_IN1_MASK 0x0000000000000001ull -#define CPUCP_PKT_VAL_MAC_CNT_IN2_SHIFT 1 -#define CPUCP_PKT_VAL_MAC_CNT_IN2_MASK 0x00000000FFFFFFFEull - -/* heartbeat status bits */ -#define CPUCP_PKT_HB_STATUS_EQ_FAULT_SHIFT 0 -#define CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK 0x00000001 - -struct cpucp_packet { - union { - __le64 value; /* For SET packets */ - __le64 result; /* For GET packets */ - __le64 addr; /* For PQ */ - }; - - __le32 ctl; - - __le32 fence; /* Signal to host that message is completed */ - - union { - struct {/* For temperature/current/voltage/fan/pwm get/set */ - __le16 sensor_index; - __le16 type; - }; - - struct { /* For I2C read/write */ - __u8 i2c_bus; - __u8 i2c_addr; - __u8 i2c_reg; - /* - * In legacy implemetations, i2c_len was not present, - * was unused and just added as pad. - * So if i2c_len is 0, it is treated as legacy - * and r/w 1 Byte, else if i2c_len is specified, - * its treated as new multibyte r/w support. - */ - __u8 i2c_len; - }; - - struct {/* For PLL info fetch */ - __le16 pll_type; - /* TODO pll_reg is kept temporary before removal */ - __le16 pll_reg; - }; - - /* For any general request */ - __le32 index; - - /* For frequency get/set */ - __le32 pll_index; - - /* For led set */ - __le32 led_index; - - /* For get CpuCP info/EEPROM data/NIC info */ - __le32 data_max_size; - - /* - * For any general status bitmask. Shall be used whenever the - * result cannot be used to hold general purpose data. - */ - __le32 status_mask; - }; - - /* For NIC requests */ - __le32 port_index; -}; - -struct cpucp_unmask_irq_arr_packet { - struct cpucp_packet cpucp_pkt; - __le32 length; - __le32 irqs[0]; -}; - -struct cpucp_nic_status_packet { - struct cpucp_packet cpucp_pkt; - __le32 length; - __le32 data[0]; -}; - -struct cpucp_array_data_packet { - struct cpucp_packet cpucp_pkt; - __le32 length; - __le32 data[0]; -}; - -enum cpucp_packet_rc { - cpucp_packet_success, - cpucp_packet_invalid, - cpucp_packet_fault -}; - -/* - * cpucp_temp_type should adhere to hwmon_temp_attributes - * defined in Linux kernel hwmon.h file - */ -enum cpucp_temp_type { - cpucp_temp_input, - cpucp_temp_min = 4, - cpucp_temp_min_hyst, - cpucp_temp_max = 6, - cpucp_temp_max_hyst, - cpucp_temp_crit, - cpucp_temp_crit_hyst, - cpucp_temp_offset = 19, - cpucp_temp_lowest = 21, - cpucp_temp_highest = 22, - cpucp_temp_reset_history = 23 -}; - -enum cpucp_in_attributes { - cpucp_in_input, - cpucp_in_min, - cpucp_in_max, - cpucp_in_lowest = 6, - cpucp_in_highest = 7, - cpucp_in_reset_history -}; - -enum cpucp_curr_attributes { - cpucp_curr_input, - cpucp_curr_min, - cpucp_curr_max, - cpucp_curr_lowest = 6, - cpucp_curr_highest = 7, - cpucp_curr_reset_history -}; - -enum cpucp_fan_attributes { - cpucp_fan_input, - cpucp_fan_min = 2, - cpucp_fan_max -}; - -enum cpucp_pwm_attributes { - cpucp_pwm_input, - cpucp_pwm_enable -}; - -enum cpucp_pcie_throughput_attributes { - cpucp_pcie_throughput_tx, - cpucp_pcie_throughput_rx -}; - -/* TODO temporary kept before removal */ -enum cpucp_pll_reg_attributes { - cpucp_pll_nr_reg, - cpucp_pll_nf_reg, - cpucp_pll_od_reg, - cpucp_pll_div_factor_reg, - cpucp_pll_div_sel_reg -}; - -/* TODO temporary kept before removal */ -enum cpucp_pll_type_attributes { - cpucp_pll_cpu, - cpucp_pll_pci, -}; - -/* - * cpucp_power_type aligns with hwmon_power_attributes - * defined in Linux kernel hwmon.h file - */ -enum cpucp_power_type { - CPUCP_POWER_INPUT = 8, - CPUCP_POWER_INPUT_HIGHEST = 9, - CPUCP_POWER_RESET_INPUT_HISTORY = 11 -}; - -/* - * MSI type enumeration table for all ASICs and future SW versions. - * For future ASIC-LKD compatibility, we can only add new enumerations. - * at the end of the table (before CPUCP_NUM_OF_MSI_TYPES). - * Changing the order of entries or removing entries is not allowed. - */ -enum cpucp_msi_type { - CPUCP_EVENT_QUEUE_MSI_TYPE, - CPUCP_NIC_PORT1_MSI_TYPE, - CPUCP_NIC_PORT3_MSI_TYPE, - CPUCP_NIC_PORT5_MSI_TYPE, - CPUCP_NIC_PORT7_MSI_TYPE, - CPUCP_NIC_PORT9_MSI_TYPE, - CPUCP_NUM_OF_MSI_TYPES -}; - -/* - * PLL enumeration table used for all ASICs and future SW versions. - * For future ASIC-LKD compatibility, we can only add new enumerations. - * at the end of the table. - * Changing the order of entries or removing entries is not allowed. - */ -enum pll_index { - CPU_PLL = 0, - PCI_PLL = 1, - NIC_PLL = 2, - DMA_PLL = 3, - MESH_PLL = 4, - MME_PLL = 5, - TPC_PLL = 6, - IF_PLL = 7, - SRAM_PLL = 8, - NS_PLL = 9, - HBM_PLL = 10, - MSS_PLL = 11, - DDR_PLL = 12, - VID_PLL = 13, - BANK_PLL = 14, - MMU_PLL = 15, - IC_PLL = 16, - MC_PLL = 17, - EMMC_PLL = 18, - PLL_MAX -}; - -enum rl_index { - TPC_RL = 0, - MME_RL, -}; - -enum pvt_index { - PVT_SW, - PVT_SE, - PVT_NW, - PVT_NE -}; - -/* Event Queue Packets */ - -struct eq_generic_event { - __le64 data[7]; -}; - -/* - * CpuCP info - */ - -#define CARD_NAME_MAX_LEN 16 -#define CPUCP_MAX_SENSORS 128 -#define CPUCP_MAX_NICS 128 -#define CPUCP_LANES_PER_NIC 4 -#define CPUCP_NIC_QSFP_EEPROM_MAX_LEN 1024 -#define CPUCP_MAX_NIC_LANES (CPUCP_MAX_NICS * CPUCP_LANES_PER_NIC) -#define CPUCP_NIC_MASK_ARR_LEN ((CPUCP_MAX_NICS + 63) / 64) -#define CPUCP_NIC_POLARITY_ARR_LEN ((CPUCP_MAX_NIC_LANES + 63) / 64) -#define CPUCP_HBM_ROW_REPLACE_MAX 32 - -struct cpucp_sensor { - __le32 type; - __le32 flags; -}; - -/** - * struct cpucp_card_types - ASIC card type. - * @cpucp_card_type_pci: PCI card. - * @cpucp_card_type_pmc: PCI Mezzanine Card. - */ -enum cpucp_card_types { - cpucp_card_type_pci, - cpucp_card_type_pmc -}; - -#define CPUCP_SEC_CONF_ENABLED_SHIFT 0 -#define CPUCP_SEC_CONF_ENABLED_MASK 0x00000001 - -#define CPUCP_SEC_CONF_FLASH_WP_SHIFT 1 -#define CPUCP_SEC_CONF_FLASH_WP_MASK 0x00000002 - -#define CPUCP_SEC_CONF_EEPROM_WP_SHIFT 2 -#define CPUCP_SEC_CONF_EEPROM_WP_MASK 0x00000004 - -/** - * struct cpucp_security_info - Security information. - * @config: configuration bit field - * @keys_num: number of stored keys - * @revoked_keys: revoked keys bit field - * @min_svn: minimal security version - */ -struct cpucp_security_info { - __u8 config; - __u8 keys_num; - __u8 revoked_keys; - __u8 min_svn; -}; - -/** - * struct cpucp_info - Info from CpuCP that is necessary to the host's driver - * @sensors: available sensors description. - * @kernel_version: CpuCP linux kernel version. - * @reserved: reserved field. - * @card_type: card configuration type. - * @card_location: in a server, each card has different connections topology - * depending on its location (relevant for PMC card type) - * @cpld_version: CPLD programmed F/W version. - * @infineon_version: Infineon main DC-DC version. - * @fuse_version: silicon production FUSE information. - * @thermal_version: thermald S/W version. - * @cpucp_version: CpuCP S/W version. - * @infineon_second_stage_version: Infineon 2nd stage DC-DC version. - * @dram_size: available DRAM size. - * @card_name: card name that will be displayed in HWMON subsystem on the host - * @sec_info: security information - * @pll_map: Bit map of supported PLLs for current ASIC version. - * @mme_binning_mask: MME binning mask, - * (0 = functional, 1 = binned) - * @dram_binning_mask: DRAM binning mask, 1 bit per dram instance - * (0 = functional 1 = binned) - * @memory_repair_flag: eFuse flag indicating memory repair - * @edma_binning_mask: EDMA binning mask, 1 bit per EDMA instance - * (0 = functional 1 = binned) - * @xbar_binning_mask: Xbar binning mask, 1 bit per Xbar instance - * (0 = functional 1 = binned) - */ -struct cpucp_info { - struct cpucp_sensor sensors[CPUCP_MAX_SENSORS]; - __u8 kernel_version[VERSION_MAX_LEN]; - __le32 reserved; - __le32 card_type; - __le32 card_location; - __le32 cpld_version; - __le32 infineon_version; - __u8 fuse_version[VERSION_MAX_LEN]; - __u8 thermal_version[VERSION_MAX_LEN]; - __u8 cpucp_version[VERSION_MAX_LEN]; - __le32 infineon_second_stage_version; - __le64 dram_size; - char card_name[CARD_NAME_MAX_LEN]; - __le64 reserved3; - __le64 reserved4; - __u8 reserved5; - __u8 dram_binning_mask; - __u8 memory_repair_flag; - __u8 edma_binning_mask; - __u8 xbar_binning_mask; - __u8 pad[3]; - struct cpucp_security_info sec_info; - __le32 reserved6; - __u8 pll_map[PLL_MAP_LEN]; - __le64 mme_binning_mask; -}; - -struct cpucp_mac_addr { - __u8 mac_addr[ETH_ALEN]; -}; - -enum cpucp_serdes_type { - TYPE_1_SERDES_TYPE, - TYPE_2_SERDES_TYPE, - HLS1_SERDES_TYPE, - HLS1H_SERDES_TYPE, - UNKNOWN_SERDES_TYPE, - MAX_NUM_SERDES_TYPE = UNKNOWN_SERDES_TYPE -}; - -struct cpucp_nic_info { - struct cpucp_mac_addr mac_addrs[CPUCP_MAX_NICS]; - __le64 link_mask[CPUCP_NIC_MASK_ARR_LEN]; - __le64 pol_tx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; - __le64 pol_rx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; - __le64 link_ext_mask[CPUCP_NIC_MASK_ARR_LEN]; - __u8 qsfp_eeprom[CPUCP_NIC_QSFP_EEPROM_MAX_LEN]; - __le64 auto_neg_mask[CPUCP_NIC_MASK_ARR_LEN]; - __le16 serdes_type; /* enum cpucp_serdes_type */ - __u8 reserved[6]; -}; - -/* - * struct cpucp_nic_status - describes the status of a NIC port. - * @port: NIC port index. - * @bad_format_cnt: e.g. CRC. - * @responder_out_of_sequence_psn_cnt: e.g NAK. - * @high_ber_reinit_cnt: link reinit due to high BER. - * @correctable_err_cnt: e.g. bit-flip. - * @uncorrectable_err_cnt: e.g. MAC errors. - * @retraining_cnt: re-training counter. - * @up: is port up. - * @pcs_link: has PCS link. - * @phy_ready: is PHY ready. - * @auto_neg: is Autoneg enabled. - * @timeout_retransmission_cnt: timeout retransmission events - * @high_ber_cnt: high ber events - */ -struct cpucp_nic_status { - __le32 port; - __le32 bad_format_cnt; - __le32 responder_out_of_sequence_psn_cnt; - __le32 high_ber_reinit; - __le32 correctable_err_cnt; - __le32 uncorrectable_err_cnt; - __le32 retraining_cnt; - __u8 up; - __u8 pcs_link; - __u8 phy_ready; - __u8 auto_neg; - __le32 timeout_retransmission_cnt; - __le32 high_ber_cnt; -}; - -enum cpucp_hbm_row_replace_cause { - REPLACE_CAUSE_DOUBLE_ECC_ERR, - REPLACE_CAUSE_MULTI_SINGLE_ECC_ERR, -}; - -struct cpucp_hbm_row_info { - __u8 hbm_idx; - __u8 pc; - __u8 sid; - __u8 bank_idx; - __le16 row_addr; - __u8 replaced_row_cause; /* enum cpucp_hbm_row_replace_cause */ - __u8 pad; -}; - -struct cpucp_hbm_row_replaced_rows_info { - __le16 num_replaced_rows; - __u8 pad[6]; - struct cpucp_hbm_row_info replaced_rows[CPUCP_HBM_ROW_REPLACE_MAX]; -}; - -#endif /* CPUCP_IF_H */ |