diff options
Diffstat (limited to 'drivers/mmc/core/mmc_ops.c')
| -rw-r--r-- | drivers/mmc/core/mmc_ops.c | 215 |
1 files changed, 168 insertions, 47 deletions
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 973756ed4016..a952cc8265af 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -21,6 +21,8 @@ #define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ #define MMC_SANITIZE_TIMEOUT_MS (240 * 1000) /* 240s */ +#define MMC_OP_COND_PERIOD_US (4 * 1000) /* 4ms */ +#define MMC_OP_COND_TIMEOUT_MS 1000 /* 1s */ static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, @@ -58,6 +60,12 @@ struct mmc_busy_data { enum mmc_busy_cmd busy_cmd; }; +struct mmc_op_cond_busy_data { + struct mmc_host *host; + u32 ocr; + struct mmc_command *cmd; +}; + int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries) { int err; @@ -136,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host) return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); } +int __mmc_go_idle(struct mmc_host *host) +{ + struct mmc_command cmd = {}; + int err; + + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + mmc_delay(1); + + return err; +} + int mmc_go_idle(struct mmc_host *host) { int err; - struct mmc_command cmd = {}; /* * Non-SPI hosts need to prevent chipselect going active during @@ -155,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host) mmc_delay(1); } - cmd.opcode = MMC_GO_IDLE_STATE; - cmd.arg = 0; - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; - - err = mmc_wait_for_cmd(host, &cmd, 0); - - mmc_delay(1); + err = __mmc_go_idle(host); if (!mmc_host_is_spi(host)) { mmc_set_chip_select(host, MMC_CS_DONTCARE); @@ -173,43 +189,64 @@ int mmc_go_idle(struct mmc_host *host) return err; } +static int __mmc_send_op_cond_cb(void *cb_data, bool *busy) +{ + struct mmc_op_cond_busy_data *data = cb_data; + struct mmc_host *host = data->host; + struct mmc_command *cmd = data->cmd; + u32 ocr = data->ocr; + int err = 0; + + err = mmc_wait_for_cmd(host, cmd, 0); + if (err) + return err; + + if (mmc_host_is_spi(host)) { + if (!(cmd->resp[0] & R1_SPI_IDLE)) { + *busy = false; + return 0; + } + } else { + if (cmd->resp[0] & MMC_CARD_BUSY) { + *busy = false; + return 0; + } + } + + *busy = true; + + /* + * According to eMMC specification v5.1 section 6.4.3, we + * should issue CMD1 repeatedly in the idle state until + * the eMMC is ready. Otherwise some eMMC devices seem to enter + * the inactive mode after mmc_init_card() issued CMD0 when + * the eMMC device is busy. + */ + if (!ocr && !mmc_host_is_spi(host)) + cmd->arg = cmd->resp[0] | BIT(30); + + return 0; +} + int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) { struct mmc_command cmd = {}; - int i, err = 0; + int err = 0; + struct mmc_op_cond_busy_data cb_data = { + .host = host, + .ocr = ocr, + .cmd = &cmd + }; cmd.opcode = MMC_SEND_OP_COND; cmd.arg = mmc_host_is_spi(host) ? 0 : ocr; cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; - for (i = 100; i; i--) { - err = mmc_wait_for_cmd(host, &cmd, 0); - if (err) - break; - - /* wait until reset completes */ - if (mmc_host_is_spi(host)) { - if (!(cmd.resp[0] & R1_SPI_IDLE)) - break; - } else { - if (cmd.resp[0] & MMC_CARD_BUSY) - break; - } - - err = -ETIMEDOUT; - - mmc_delay(10); - - /* - * According to eMMC specification v5.1 section 6.4.3, we - * should issue CMD1 repeatedly in the idle state until - * the eMMC is ready. Otherwise some eMMC devices seem to enter - * the inactive mode after mmc_init_card() issued CMD0 when - * the eMMC device is busy. - */ - if (!ocr && !mmc_host_is_spi(host)) - cmd.arg = cmd.resp[0] | BIT(30); - } + err = __mmc_poll_for_busy(host, MMC_OP_COND_PERIOD_US, + MMC_OP_COND_TIMEOUT_MS, + &__mmc_send_op_cond_cb, &cb_data); + if (err) + return err; if (rocr && !mmc_host_is_spi(host)) *rocr = cmd.resp[0]; @@ -346,7 +383,7 @@ int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) if (!card || !new_ext_csd) return -EINVAL; - if (!mmc_can_ext_csd(card)) + if (!mmc_card_can_ext_csd(card)) return -EOPNOTSUPP; /* @@ -435,7 +472,7 @@ static int mmc_busy_cb(void *cb_data, bool *busy) u32 status = 0; int err; - if (host->ops->card_busy) { + if (data->busy_cmd != MMC_BUSY_IO && host->ops->card_busy) { *busy = host->ops->card_busy(host); return 0; } @@ -457,6 +494,7 @@ static int mmc_busy_cb(void *cb_data, bool *busy) break; case MMC_BUSY_HPI: case MMC_BUSY_EXTR_SINGLE: + case MMC_BUSY_IO: break; default: err = -EINVAL; @@ -469,14 +507,14 @@ static int mmc_busy_cb(void *cb_data, bool *busy) return 0; } -int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, +int __mmc_poll_for_busy(struct mmc_host *host, unsigned int period_us, + unsigned int timeout_ms, int (*busy_cb)(void *cb_data, bool *busy), void *cb_data) { - struct mmc_host *host = card->host; int err; unsigned long timeout; - unsigned int udelay = 32, udelay_max = 32768; + unsigned int udelay = period_us ? period_us : 32, udelay_max = 32768; bool expired = false; bool busy = false; @@ -509,18 +547,21 @@ int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, return 0; } +EXPORT_SYMBOL_GPL(__mmc_poll_for_busy); int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, bool retry_crc_err, enum mmc_busy_cmd busy_cmd) { + struct mmc_host *host = card->host; struct mmc_busy_data cb_data; cb_data.card = card; cb_data.retry_crc_err = retry_crc_err; cb_data.busy_cmd = busy_cmd; - return __mmc_poll_for_busy(card, timeout_ms, &mmc_busy_cb, &cb_data); + return __mmc_poll_for_busy(host, 0, timeout_ms, &mmc_busy_cb, &cb_data); } +EXPORT_SYMBOL_GPL(mmc_poll_for_busy); bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd, unsigned int timeout_ms) @@ -542,6 +583,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd, cmd->busy_timeout = timeout_ms; return true; } +EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd); /** * __mmc_switch - modify EXT_CSD register @@ -902,7 +944,7 @@ out: return err; } -int mmc_can_ext_csd(struct mmc_card *card) +bool mmc_card_can_ext_csd(struct mmc_card *card) { return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3); } @@ -956,8 +998,15 @@ void mmc_run_bkops(struct mmc_card *card) */ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS); - if (err) - pr_warn("%s: Error %d starting bkops\n", + /* + * If the BKOPS timed out, the card is probably still busy in the + * R1_STATE_PRG. Rather than continue to wait, let's try to abort + * it with a HPI command to get back into R1_STATE_TRAN. + */ + if (err == -ETIMEDOUT && !mmc_interrupt_hpi(card)) + pr_warn("%s: BKOPS aborted\n", mmc_hostname(card->host)); + else if (err) + pr_warn("%s: Error %d running bkops\n", mmc_hostname(card->host), err); mmc_retune_release(card->host); @@ -997,7 +1046,7 @@ int mmc_sanitize(struct mmc_card *card, unsigned int timeout_ms) struct mmc_host *host = card->host; int err; - if (!mmc_can_sanitize(card)) { + if (!mmc_card_can_sanitize(card)) { pr_warn("%s: Sanitize not supported\n", mmc_hostname(host)); return -EOPNOTSUPP; } @@ -1028,3 +1077,75 @@ int mmc_sanitize(struct mmc_card *card, unsigned int timeout_ms) return err; } EXPORT_SYMBOL_GPL(mmc_sanitize); + +/** + * mmc_read_tuning() - read data blocks from the mmc + * @host: mmc host doing the read + * @blksz: data block size + * @blocks: number of blocks to read + * + * Read one or more blocks of data from the beginning of the mmc. This is a + * low-level helper for tuning operation. It is assumed that CMD23 can be used + * for multi-block read if the host supports it. + * + * Note: Allocate and free a temporary buffer to store the data read. The data + * is not available outside of the function, only the status of the read + * operation. + * + * Return: 0 in case of success, otherwise -EIO / -ENOMEM / -E2BIG + */ +int mmc_read_tuning(struct mmc_host *host, unsigned int blksz, unsigned int blocks) +{ + struct mmc_request mrq = {}; + struct mmc_command sbc = {}; + struct mmc_command cmd = {}; + struct mmc_command stop = {}; + struct mmc_data data = {}; + struct scatterlist sg; + void *buf; + unsigned int len; + + if (blocks > 1) { + if (mmc_host_can_cmd23(host)) { + mrq.sbc = &sbc; + sbc.opcode = MMC_SET_BLOCK_COUNT; + sbc.arg = blocks; + sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + } + cmd.opcode = MMC_READ_MULTIPLE_BLOCK; + mrq.stop = &stop; + stop.opcode = MMC_STOP_TRANSMISSION; + stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.opcode = MMC_READ_SINGLE_BLOCK; + } + + mrq.cmd = &cmd; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + mrq.data = &data; + data.flags = MMC_DATA_READ; + data.blksz = blksz; + data.blocks = blocks; + data.blk_addr = 0; + data.sg = &sg; + data.sg_len = 1; + data.timeout_ns = 1000000000; + + if (check_mul_overflow(blksz, blocks, &len)) + return -E2BIG; + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + sg_init_one(&sg, buf, len); + + mmc_wait_for_req(host, &mrq); + kfree(buf); + + if (sbc.error || cmd.error || data.error) + return -EIO; + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_read_tuning); |