diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-of-arasan.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-arasan.c | 1534 |
1 files changed, 1365 insertions, 169 deletions
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index c9e3e050ccc8..b97d042897ad 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* * Arasan Secure Digital Host Controller Interface. * Copyright (C) 2011 - 2012 Michal Simek <monstr@monstr.eu> @@ -12,29 +13,82 @@ * * Authors: Xiaobo Xie <X.Xie@freescale.com> * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. */ #include <linux/clk-provider.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> #include <linux/phy/phy.h> #include <linux/regmap.h> -#include <linux/of.h> +#include <linux/reset.h> +#include <linux/firmware/xlnx-zynqmp.h> #include "cqhci.h" +#include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #define SDHCI_ARASAN_VENDOR_REGISTER 0x78 + +#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8 +#define SDHCI_ARASAN_ITAPDLY_SEL_MASK 0xFF + +#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC +#define SDHCI_ARASAN_OTAPDLY_SEL_MASK 0x3F + #define SDHCI_ARASAN_CQE_BASE_ADDR 0x200 #define VENDOR_ENHANCED_STROBE BIT(0) #define PHY_CLK_TOO_SLOW_HZ 400000 +#define MIN_PHY_CLK_HZ 50000000 + +#define SDHCI_ITAPDLY_CHGWIN 0x200 +#define SDHCI_ITAPDLY_ENABLE 0x100 +#define SDHCI_OTAPDLY_ENABLE 0x40 + +#define PHY_CTRL_REG1 0x270 +#define PHY_CTRL_ITAPDLY_ENA_MASK BIT(0) +#define PHY_CTRL_ITAPDLY_SEL_MASK GENMASK(5, 1) +#define PHY_CTRL_ITAPDLY_SEL_SHIFT 1 +#define PHY_CTRL_ITAP_CHG_WIN_MASK BIT(6) +#define PHY_CTRL_OTAPDLY_ENA_MASK BIT(8) +#define PHY_CTRL_OTAPDLY_SEL_MASK GENMASK(15, 12) +#define PHY_CTRL_OTAPDLY_SEL_SHIFT 12 +#define PHY_CTRL_STRB_SEL_MASK GENMASK(23, 16) +#define PHY_CTRL_STRB_SEL_SHIFT 16 +#define PHY_CTRL_TEST_CTRL_MASK GENMASK(31, 24) + +#define PHY_CTRL_REG2 0x274 +#define PHY_CTRL_EN_DLL_MASK BIT(0) +#define PHY_CTRL_DLL_RDY_MASK BIT(1) +#define PHY_CTRL_FREQ_SEL_MASK GENMASK(6, 4) +#define PHY_CTRL_FREQ_SEL_SHIFT 4 +#define PHY_CTRL_SEL_DLY_TX_MASK BIT(16) +#define PHY_CTRL_SEL_DLY_RX_MASK BIT(17) +#define FREQSEL_200M_170M 0x0 +#define FREQSEL_170M_140M 0x1 +#define FREQSEL_140M_110M 0x2 +#define FREQSEL_110M_80M 0x3 +#define FREQSEL_80M_50M 0x4 +#define FREQSEL_275M_250M 0x5 +#define FREQSEL_250M_225M 0x6 +#define FREQSEL_225M_200M 0x7 +#define PHY_DLL_TIMEOUT_MS 100 + +#define SDHCI_HW_RST_EN BIT(4) + +/* Default settings for ZynqMP Clock Phases */ +#define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0} +#define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0} + +#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0} +#define VERSAL_OCLK_PHASE {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0} + +#define VERSAL_NET_EMMC_ICLK_PHASE {0, 0, 0, 0, 0, 0, 0, 0, 39, 0, 0} +#define VERSAL_NET_EMMC_OCLK_PHASE {0, 113, 0, 0, 0, 0, 0, 0, 113, 79, 45} + +#define VERSAL_NET_PHY_CTRL_STRB90_STRB180_VAL 0X77 /* * On some SoCs the syscon area has a feature where the upper 16-bits of @@ -45,6 +99,9 @@ #define HIWORD_UPDATE(val, mask, shift) \ ((val) << (shift) | (mask) << ((shift) + 16)) +#define CD_STABLE_TIMEOUT_US 1000000 +#define CD_STABLE_MAX_SLEEP_US 10 + /** * struct sdhci_arasan_soc_ctl_field - Field used in sdhci_arasan_soc_ctl_map * @@ -61,55 +118,106 @@ struct sdhci_arasan_soc_ctl_field { /** * struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers * - * It's up to the licensee of the Arsan IP block to make these available - * somewhere if needed. Presumably these will be scattered somewhere that's - * accessible via the syscon API. - * * @baseclkfreq: Where to find corecfg_baseclkfreq * @clockmultiplier: Where to find corecfg_clockmultiplier + * @support64b: Where to find SUPPORT64B bit * @hiword_update: If true, use HIWORD_UPDATE to access the syscon + * + * It's up to the licensee of the Arsan IP block to make these available + * somewhere if needed. Presumably these will be scattered somewhere that's + * accessible via the syscon API. */ struct sdhci_arasan_soc_ctl_map { struct sdhci_arasan_soc_ctl_field baseclkfreq; struct sdhci_arasan_soc_ctl_field clockmultiplier; + struct sdhci_arasan_soc_ctl_field support64b; bool hiword_update; }; /** - * struct sdhci_arasan_data + * struct sdhci_arasan_clk_ops - Clock Operations for Arasan SD controller + * + * @sdcardclk_ops: The output clock related operations + * @sampleclk_ops: The sample clock related operations + */ +struct sdhci_arasan_clk_ops { + const struct clk_ops *sdcardclk_ops; + const struct clk_ops *sampleclk_ops; +}; + +/** + * struct sdhci_arasan_clk_data - Arasan Controller Clock Data. + * + * @sdcardclk_hw: Struct for the clock we might provide to a PHY. + * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw. + * @sampleclk_hw: Struct for the clock we might provide to a PHY. + * @sampleclk: Pointer to normal 'struct clock' for sampleclk_hw. + * @clk_phase_in: Array of Input Clock Phase Delays for all speed modes + * @clk_phase_out: Array of Output Clock Phase Delays for all speed modes + * @set_clk_delays: Function pointer for setting Clock Delays + * @clk_of_data: Platform specific runtime clock data storage pointer + */ +struct sdhci_arasan_clk_data { + struct clk_hw sdcardclk_hw; + struct clk *sdcardclk; + struct clk_hw sampleclk_hw; + struct clk *sampleclk; + int clk_phase_in[MMC_TIMING_MMC_HS400 + 1]; + int clk_phase_out[MMC_TIMING_MMC_HS400 + 1]; + void (*set_clk_delays)(struct sdhci_host *host); + void *clk_of_data; +}; + +/** + * struct sdhci_arasan_data - Arasan Controller Data + * * @host: Pointer to the main SDHCI host structure. * @clk_ahb: Pointer to the AHB clock * @phy: Pointer to the generic phy * @is_phy_on: True if the PHY is on; false if not. - * @sdcardclk_hw: Struct for the clock we might provide to a PHY. - * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw. + * @internal_phy_reg: True if the PHY is within the Host controller. + * @has_cqe: True if controller has command queuing engine. + * @clk_data: Struct for the Arasan Controller Clock Data. + * @clk_ops: Struct for the Arasan Controller Clock Operations. * @soc_ctl_base: Pointer to regmap for syscon for soc_ctl registers. * @soc_ctl_map: Map to get offsets into soc_ctl registers. + * @quirks: Arasan deviations from spec. */ struct sdhci_arasan_data { struct sdhci_host *host; struct clk *clk_ahb; struct phy *phy; bool is_phy_on; + bool internal_phy_reg; bool has_cqe; - struct clk_hw sdcardclk_hw; - struct clk *sdcardclk; + struct sdhci_arasan_clk_data clk_data; + const struct sdhci_arasan_clk_ops *clk_ops; struct regmap *soc_ctl_base; const struct sdhci_arasan_soc_ctl_map *soc_ctl_map; - unsigned int quirks; /* Arasan deviations from spec */ + unsigned int quirks; /* Controller does not have CD wired and will not function normally without */ #define SDHCI_ARASAN_QUIRK_FORCE_CDTEST BIT(0) /* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the * internal clock even when the clock isn't stable */ #define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1) +/* + * Some of the Arasan variations might not have timing requirements + * met at 25MHz for Default Speed mode, those controllers work at + * 19MHz instead + */ +#define SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN BIT(2) +/* Enable CD stable check before power-up */ +#define SDHCI_ARASAN_QUIRK_ENSURE_CD_STABLE BIT(3) }; struct sdhci_arasan_of_data { const struct sdhci_arasan_soc_ctl_map *soc_ctl_map; const struct sdhci_pltfm_data *pdata; + const struct sdhci_arasan_clk_ops *clk_ops; + u32 quirks; }; static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = { @@ -118,17 +226,93 @@ static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = { .hiword_update = true, }; +static const struct sdhci_arasan_soc_ctl_map intel_lgm_emmc_soc_ctl_map = { + .baseclkfreq = { .reg = 0xa0, .width = 8, .shift = 2 }, + .clockmultiplier = { .reg = 0, .width = -1, .shift = -1 }, + .hiword_update = false, +}; + +static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = { + .baseclkfreq = { .reg = 0x80, .width = 8, .shift = 2 }, + .clockmultiplier = { .reg = 0, .width = -1, .shift = -1 }, + .hiword_update = false, +}; + +static const struct sdhci_arasan_soc_ctl_map intel_keembay_soc_ctl_map = { + .baseclkfreq = { .reg = 0x0, .width = 8, .shift = 14 }, + .clockmultiplier = { .reg = 0x4, .width = 8, .shift = 14 }, + .support64b = { .reg = 0x4, .width = 1, .shift = 24 }, + .hiword_update = false, +}; + +static void sdhci_arasan_phy_set_delaychain(struct sdhci_host *host, bool enable) +{ + u32 reg; + + reg = readl(host->ioaddr + PHY_CTRL_REG2); + if (enable) + reg |= (PHY_CTRL_SEL_DLY_TX_MASK | PHY_CTRL_SEL_DLY_RX_MASK); + else + reg &= ~(PHY_CTRL_SEL_DLY_TX_MASK | PHY_CTRL_SEL_DLY_RX_MASK); + + writel(reg, host->ioaddr + PHY_CTRL_REG2); +} + +static int sdhci_arasan_phy_set_dll(struct sdhci_host *host, bool enable) +{ + u32 reg; + + reg = readl(host->ioaddr + PHY_CTRL_REG2); + if (enable) + reg |= PHY_CTRL_EN_DLL_MASK; + else + reg &= ~PHY_CTRL_EN_DLL_MASK; + + writel(reg, host->ioaddr + PHY_CTRL_REG2); + + if (!enable) + return 0; + + return readl_relaxed_poll_timeout(host->ioaddr + PHY_CTRL_REG2, reg, + (reg & PHY_CTRL_DLL_RDY_MASK), 10, + 1000 * PHY_DLL_TIMEOUT_MS); +} + +static void sdhci_arasan_phy_dll_set_freq(struct sdhci_host *host, int clock) +{ + u32 reg, freq_sel, freq; + + freq = DIV_ROUND_CLOSEST(clock, 1000000); + if (freq <= 200 && freq > 170) + freq_sel = FREQSEL_200M_170M; + else if (freq <= 170 && freq > 140) + freq_sel = FREQSEL_170M_140M; + else if (freq <= 140 && freq > 110) + freq_sel = FREQSEL_140M_110M; + else if (freq <= 110 && freq > 80) + freq_sel = FREQSEL_110M_80M; + else + freq_sel = FREQSEL_80M_50M; + + reg = readl(host->ioaddr + PHY_CTRL_REG2); + reg &= ~PHY_CTRL_FREQ_SEL_MASK; + reg |= (freq_sel << PHY_CTRL_FREQ_SEL_SHIFT); + writel(reg, host->ioaddr + PHY_CTRL_REG2); +} + /** * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers * + * @host: The sdhci_host + * @fld: The field to write to + * @val: The value to write + * * This function allows writing to fields in sdhci_arasan_soc_ctl_map. * Note that if a field is specified as not available (shift < 0) then * this function will silently return an error code. It will be noisy * and print errors for any other (unexpected) errors. * - * @host: The sdhci_host - * @fld: The field to write to - * @val: The value to write + * Return: 0 on success and error value on error */ static int sdhci_arasan_syscon_write(struct sdhci_host *host, const struct sdhci_arasan_soc_ctl_field *fld, @@ -172,6 +356,7 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; bool ctrl_phy = false; if (!IS_ERR(sdhci_arasan->phy)) { @@ -190,7 +375,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) * through low speeds without power cycling. */ sdhci_set_clock(host, host->max_clk); - phy_power_on(sdhci_arasan->phy); + if (phy_power_on(sdhci_arasan->phy)) { + pr_err("%s: Cannot power on phy.\n", + mmc_hostname(host->mmc)); + return; + } + sdhci_arasan->is_phy_on = true; /* @@ -213,8 +403,35 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) sdhci_arasan->is_phy_on = false; } + if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN) { + /* + * Some of the Arasan variations might not have timing + * requirements met at 25MHz for Default Speed mode, + * those controllers work at 19MHz instead. + */ + if (clock == DEFAULT_SPEED_MAX_DTR) + clock = (DEFAULT_SPEED_MAX_DTR * 19) / 25; + } + + /* Set the Input and Output Clock Phase Delays */ + if (clk_data->set_clk_delays && clock > PHY_CLK_TOO_SLOW_HZ) + clk_data->set_clk_delays(host); + + if (sdhci_arasan->internal_phy_reg && clock >= MIN_PHY_CLK_HZ) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + sdhci_arasan_phy_set_dll(host, 0); + sdhci_arasan_phy_set_delaychain(host, 0); + sdhci_arasan_phy_dll_set_freq(host, clock); + } else if (sdhci_arasan->internal_phy_reg) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + sdhci_arasan_phy_set_delaychain(host, 1); + } + sdhci_set_clock(host, clock); + if (sdhci_arasan->internal_phy_reg && clock >= MIN_PHY_CLK_HZ) + sdhci_arasan_phy_set_dll(host, 1); + if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE) /* * Some controllers immediately report SDHCI_CLOCK_INT_STABLE @@ -226,7 +443,12 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock) msleep(20); if (ctrl_phy) { - phy_power_on(sdhci_arasan->phy); + if (phy_power_on(sdhci_arasan->phy)) { + pr_err("%s: Cannot power on phy.\n", + mmc_hostname(host->mmc)); + return; + } + sdhci_arasan->is_phy_on = true; } } @@ -252,7 +474,7 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); - sdhci_reset(host, mask); + sdhci_and_cqhci_reset(host, mask); if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) { ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); @@ -261,6 +483,21 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask) } } +static void sdhci_arasan_hw_reset(struct sdhci_host *host) +{ + u8 reg; + + reg = sdhci_readb(host, SDHCI_POWER_CONTROL); + reg |= SDHCI_HW_RST_EN; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* As per eMMC spec, minimum 1us is required but give it 2us for good measure */ + usleep_range(2, 5); + reg &= ~SDHCI_HW_RST_EN; + sdhci_writeb(host, reg, SDHCI_POWER_CONTROL); + /* As per eMMC spec, minimum 200us is required but give it 300us for good measure */ + usleep_range(300, 500); +} + static int sdhci_arasan_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) { @@ -283,15 +520,22 @@ static int sdhci_arasan_voltage_switch(struct mmc_host *mmc, return -EINVAL; } -static void sdhci_arasan_set_power(struct sdhci_host *host, unsigned char mode, - unsigned short vdd) +static void sdhci_arasan_set_power_and_bus_voltage(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) { - if (!IS_ERR(host->mmc->supply.vmmc)) { - struct mmc_host *mmc = host->mmc; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + u32 reg; - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); - } - sdhci_set_power_noreg(host, mode, vdd); + /* + * Ensure that the card detect logic has stabilized before powering up, this is + * necessary after a host controller reset. + */ + if (mode == MMC_POWER_UP && sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_ENSURE_CD_STABLE) + read_poll_timeout(sdhci_readl, reg, reg & SDHCI_CD_STABLE, CD_STABLE_MAX_SLEEP_US, + CD_STABLE_TIMEOUT_US, false, host, SDHCI_PRESENT_STATE); + + sdhci_set_power_and_bus_voltage(host, mode, vdd); } static const struct sdhci_ops sdhci_arasan_ops = { @@ -301,19 +545,8 @@ static const struct sdhci_ops sdhci_arasan_ops = { .set_bus_width = sdhci_set_bus_width, .reset = sdhci_arasan_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, - .set_power = sdhci_arasan_set_power, -}; - -static const struct sdhci_pltfm_data sdhci_arasan_pdata = { - .ops = &sdhci_arasan_ops, - .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, - .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | - SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | - SDHCI_QUIRK2_STOP_WITH_TC, -}; - -static struct sdhci_arasan_of_data sdhci_arasan_data = { - .pdata = &sdhci_arasan_pdata, + .set_power = sdhci_arasan_set_power_and_bus_voltage, + .hw_reset = sdhci_arasan_hw_reset, }; static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask) @@ -361,7 +594,7 @@ static const struct sdhci_ops sdhci_arasan_cqe_ops = { .set_bus_width = sdhci_set_bus_width, .reset = sdhci_arasan_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, - .set_power = sdhci_arasan_set_power, + .set_power = sdhci_arasan_set_power_and_bus_voltage, .irq = sdhci_arasan_cqhci_irq, }; @@ -372,18 +605,13 @@ static const struct sdhci_pltfm_data sdhci_arasan_cqe_pdata = { SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, }; -static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = { - .soc_ctl_map = &rk3399_soc_ctl_map, - .pdata = &sdhci_arasan_cqe_pdata, -}; - -#ifdef CONFIG_PM_SLEEP /** * sdhci_arasan_suspend - Suspend method for the driver * @dev: Address of the device structure - * Returns 0 on success and error value on error * * Put the device in a low power state. + * + * Return: 0 on success and error value on error */ static int sdhci_arasan_suspend(struct device *dev) { @@ -409,7 +637,9 @@ static int sdhci_arasan_suspend(struct device *dev) ret = phy_power_off(sdhci_arasan->phy); if (ret) { dev_err(dev, "Cannot power off phy.\n"); - sdhci_resume_host(host); + if (sdhci_resume_host(host)) + dev_err(dev, "Cannot resume host.\n"); + return ret; } sdhci_arasan->is_phy_on = false; @@ -424,9 +654,10 @@ static int sdhci_arasan_suspend(struct device *dev) /** * sdhci_arasan_resume - Resume method for the driver * @dev: Address of the device structure - * Returns 0 on success and error value on error * * Resume operation after suspend + * + * Return: 0 on success and error value on error */ static int sdhci_arasan_resume(struct device *dev) { @@ -467,50 +698,28 @@ static int sdhci_arasan_resume(struct device *dev) return 0; } -#endif /* ! CONFIG_PM_SLEEP */ - -static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend, - sdhci_arasan_resume); -static const struct of_device_id sdhci_arasan_of_match[] = { - /* SoC-specific compatible strings w/ soc_ctl_map */ - { - .compatible = "rockchip,rk3399-sdhci-5.1", - .data = &sdhci_arasan_rk3399_data, - }, - /* Generic compatible below here */ - { - .compatible = "arasan,sdhci-8.9a", - .data = &sdhci_arasan_data, - }, - { - .compatible = "arasan,sdhci-5.1", - .data = &sdhci_arasan_data, - }, - { - .compatible = "arasan,sdhci-4.9a", - .data = &sdhci_arasan_data, - }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match); +static DEFINE_SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend, + sdhci_arasan_resume); /** * sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate * + * @hw: Pointer to the hardware clock structure. + * @parent_rate: The parent rate (should be rate of clk_xin). + * * Return the current actual rate of the SD card clock. This can be used * to communicate with out PHY. * - * @hw: Pointer to the hardware clock structure. - * @parent_rate The parent rate (should be rate of clk_xin). - * Returns the card clock rate. + * Return: The card clock rate. */ static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) - { + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); struct sdhci_arasan_data *sdhci_arasan = - container_of(hw, struct sdhci_arasan_data, sdcardclk_hw); + container_of(clk_data, struct sdhci_arasan_data, clk_data); struct sdhci_host *host = sdhci_arasan->host; return host->mmc->actual_clock; @@ -521,8 +730,445 @@ static const struct clk_ops arasan_sdcardclk_ops = { }; /** + * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate + * + * @hw: Pointer to the hardware clock structure. + * @parent_rate: The parent rate (should be rate of clk_xin). + * + * Return the current actual rate of the sampling clock. This can be used + * to communicate with out PHY. + * + * Return: The sample clock rate. + */ +static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + + return host->mmc->actual_clock; +} + +static const struct clk_ops arasan_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, +}; + +/** + * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays + * + * @hw: Pointer to the hardware clock structure. + * @degrees: The clock phase shift between 0 - 359. + * + * Set the SD Output Clock Tap Delays for Output path + * + * Return: 0 on success and error value on error + */ +static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + const char *clk_name = clk_hw_get_name(hw); + u32 node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1; + u8 tap_delay, tap_max = 0; + int ret; + + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) + return 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 30 Taps are available */ + tap_max = 30; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 15 Taps are available */ + tap_max = 15; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 8 Taps are available */ + tap_max = 8; + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + ret = zynqmp_pm_set_sd_tapdelay(node_id, PM_TAPDELAY_OUTPUT, tap_delay); + if (ret) + pr_err("Error setting Output Tap Delay\n"); + + /* Release DLL Reset */ + zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_RELEASE); + + return ret; +} + +static const struct clk_ops zynqmp_sdcardclk_ops = { + .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate, + .set_phase = sdhci_zynqmp_sdcardclk_set_phase, +}; + +/** + * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays + * + * @hw: Pointer to the hardware clock structure. + * @degrees: The clock phase shift between 0 - 359. + * + * Set the SD Input Clock Tap Delays for Input path + * + * Return: 0 on success and error value on error + */ +static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + const char *clk_name = clk_hw_get_name(hw); + u32 node_id = !strcmp(clk_name, "clk_in_sd0") ? NODE_SD_0 : NODE_SD_1; + u8 tap_delay, tap_max = 0; + int ret; + + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) + return 0; + + /* Assert DLL Reset */ + zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_ASSERT); + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 120 Taps are available */ + tap_max = 120; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 60 Taps are available */ + tap_max = 60; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 30 Taps are available */ + tap_max = 30; + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + ret = zynqmp_pm_set_sd_tapdelay(node_id, PM_TAPDELAY_INPUT, tap_delay); + if (ret) + pr_err("Error setting Input Tap Delay\n"); + + return ret; +} + +static const struct clk_ops zynqmp_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, + .set_phase = sdhci_zynqmp_sampleclk_set_phase, +}; + +/** + * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays + * + * @hw: Pointer to the hardware clock structure. + * @degrees: The clock phase shift between 0 - 359. + * + * Set the SD Output Clock Tap Delays for Output path + * + * Return: 0 on success and error value on error + */ +static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + u8 tap_delay, tap_max = 0; + + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) + return 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 30 Taps are available */ + tap_max = 30; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 15 Taps are available */ + tap_max = 15; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 8 Taps are available */ + tap_max = 8; + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + u32 regval; + + regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER); + regval |= SDHCI_OTAPDLY_ENABLE; + sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); + regval &= ~SDHCI_ARASAN_OTAPDLY_SEL_MASK; + regval |= tap_delay; + sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); + } + + return 0; +} + +static const struct clk_ops versal_sdcardclk_ops = { + .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate, + .set_phase = sdhci_versal_sdcardclk_set_phase, +}; + +/** + * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays + * + * @hw: Pointer to the hardware clock structure. + * @degrees: The clock phase shift between 0 - 359. + * + * Set the SD Input Clock Tap Delays for Input path + * + * Return: 0 on success and error value on error + */ +static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + u8 tap_delay, tap_max = 0; + + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) + return 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 120 Taps are available */ + tap_max = 120; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 60 Taps are available */ + tap_max = 60; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 30 Taps are available */ + tap_max = 30; + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + u32 regval; + + regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval |= SDHCI_ITAPDLY_CHGWIN; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval |= SDHCI_ITAPDLY_ENABLE; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval &= ~SDHCI_ARASAN_ITAPDLY_SEL_MASK; + regval |= tap_delay; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval &= ~SDHCI_ITAPDLY_CHGWIN; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + } + + return 0; +} + +static const struct clk_ops versal_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, + .set_phase = sdhci_versal_sampleclk_set_phase, +}; + +static int sdhci_versal_net_emmc_sdcardclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + u8 tap_delay, tap_max = 0; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_MMC_DDR52: + tap_max = 16; + break; + case MMC_TIMING_MMC_HS200: + case MMC_TIMING_MMC_HS400: + /* For 200MHz clock, 32 Taps are available */ + tap_max = 32; + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + u32 regval; + + regval = sdhci_readl(host, PHY_CTRL_REG1); + regval |= PHY_CTRL_OTAPDLY_ENA_MASK; + sdhci_writel(host, regval, PHY_CTRL_REG1); + regval &= ~PHY_CTRL_OTAPDLY_SEL_MASK; + regval |= tap_delay << PHY_CTRL_OTAPDLY_SEL_SHIFT; + sdhci_writel(host, regval, PHY_CTRL_REG1); + } + + return 0; +} + +static const struct clk_ops versal_net_sdcardclk_ops = { + .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate, + .set_phase = sdhci_versal_net_emmc_sdcardclk_set_phase, +}; + +static int sdhci_versal_net_emmc_sampleclk_set_phase(struct clk_hw *hw, int degrees) +{ + struct sdhci_arasan_clk_data *clk_data = + container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw); + struct sdhci_arasan_data *sdhci_arasan = + container_of(clk_data, struct sdhci_arasan_data, clk_data); + struct sdhci_host *host = sdhci_arasan->host; + u8 tap_delay, tap_max = 0; + u32 regval; + + switch (host->timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_MMC_DDR52: + tap_max = 32; + break; + case MMC_TIMING_MMC_HS400: + /* Strobe select tap point for strb90 and strb180 */ + regval = sdhci_readl(host, PHY_CTRL_REG1); + regval &= ~PHY_CTRL_STRB_SEL_MASK; + regval |= VERSAL_NET_PHY_CTRL_STRB90_STRB180_VAL << PHY_CTRL_STRB_SEL_SHIFT; + sdhci_writel(host, regval, PHY_CTRL_REG1); + break; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + regval = sdhci_readl(host, PHY_CTRL_REG1); + regval |= PHY_CTRL_ITAP_CHG_WIN_MASK; + sdhci_writel(host, regval, PHY_CTRL_REG1); + regval |= PHY_CTRL_ITAPDLY_ENA_MASK; + sdhci_writel(host, regval, PHY_CTRL_REG1); + regval &= ~PHY_CTRL_ITAPDLY_SEL_MASK; + regval |= tap_delay << PHY_CTRL_ITAPDLY_SEL_SHIFT; + sdhci_writel(host, regval, PHY_CTRL_REG1); + regval &= ~PHY_CTRL_ITAP_CHG_WIN_MASK; + sdhci_writel(host, regval, PHY_CTRL_REG1); + } + + return 0; +} + +static const struct clk_ops versal_net_sampleclk_ops = { + .recalc_rate = sdhci_arasan_sampleclk_recalc_rate, + .set_phase = sdhci_versal_net_emmc_sampleclk_set_phase, +}; + +static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid) +{ + u16 clk; + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN); + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Issue DLL Reset */ + zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_PULSE); + + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + sdhci_enable_clk(host, clk); +} + +static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw; + const char *clk_name = clk_hw_get_name(hw); + u32 device_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : + NODE_SD_1; + int err; + + /* ZynqMP SD controller does not perform auto tuning in DDR50 mode */ + if (mmc->ios.timing == MMC_TIMING_UHS_DDR50) + return 0; + + arasan_zynqmp_dll_reset(host, device_id); + + err = sdhci_execute_tuning(mmc, opcode); + if (err) + return err; + + arasan_zynqmp_dll_reset(host, device_id); + + return 0; +} + +/** * sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier * + * @host: The sdhci_host + * @value: The value to write + * * The corecfg_clockmultiplier is supposed to contain clock multiplier * value of programmable clock generator. * @@ -534,8 +1180,6 @@ static const struct clk_ops arasan_sdcardclk_ops = { * - The value of corecfg_clockmultiplier should sync with that of corresponding * value reading from sdhci_capability_register. So this function is called * once at probe time and never called again. - * - * @host: The sdhci_host */ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host, u32 value) @@ -562,6 +1206,8 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host, /** * sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq * + * @host: The sdhci_host + * * The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin. This * function can be used to make that happen. * @@ -573,8 +1219,6 @@ static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host, * - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider * to achieve lower clock rates. That means that this function is called once * at probe time and never called again. - * - * @host: The sdhci_host */ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host) { @@ -582,7 +1226,7 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host) struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); const struct sdhci_arasan_soc_ctl_map *soc_ctl_map = sdhci_arasan->soc_ctl_map; - u32 mhz = DIV_ROUND_CLOSEST(clk_get_rate(pltfm_host->clk), 1000000); + u32 mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000); /* Having a map is optional */ if (!soc_ctl_map) @@ -598,39 +1242,355 @@ static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host) sdhci_arasan_syscon_write(host, &soc_ctl_map->baseclkfreq, mhz); } +static void sdhci_arasan_set_clk_delays(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; + + clk_set_phase(clk_data->sampleclk, + clk_data->clk_phase_in[host->timing]); + clk_set_phase(clk_data->sdcardclk, + clk_data->clk_phase_out[host->timing]); +} + +static void arasan_dt_read_clk_phase(struct device *dev, + struct sdhci_arasan_clk_data *clk_data, + unsigned int timing, const char *prop) +{ + struct device_node *np = dev->of_node; + + u32 clk_phase[2] = {0}; + int ret; + + /* + * Read Tap Delay values from DT, if the DT does not contain the + * Tap Values then use the pre-defined values. + */ + ret = of_property_read_variable_u32_array(np, prop, &clk_phase[0], + 2, 0); + if (ret < 0) { + dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n", + prop, clk_data->clk_phase_in[timing], + clk_data->clk_phase_out[timing]); + return; + } + + /* The values read are Input and Output Clock Delays in order */ + clk_data->clk_phase_in[timing] = clk_phase[0]; + clk_data->clk_phase_out[timing] = clk_phase[1]; +} + /** - * sdhci_arasan_register_sdclk - Register the sdclk for a PHY to use + * arasan_dt_parse_clk_phases - Read Clock Delay values from DT * - * Some PHY devices need to know what the actual card clock is. In order for - * them to find out, we'll provide a clock through the common clock framework - * for them to query. + * @dev: Pointer to our struct device. + * @clk_data: Pointer to the Clock Data structure * - * Note: without seriously re-architecting SDHCI's clock code and testing on - * all platforms, there's no way to create a totally beautiful clock here - * with all clock ops implemented. Instead, we'll just create a clock that can - * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock - * framework that we're doing things behind its back. This should be sufficient - * to create nice clean device tree bindings and later (if needed) we can try - * re-architecting SDHCI if we see some benefit to it. + * Called at initialization to parse the values of Clock Delays. + */ +static void arasan_dt_parse_clk_phases(struct device *dev, + struct sdhci_arasan_clk_data *clk_data) +{ + u32 mio_bank = 0; + int i; + + /* + * This has been kept as a pointer and is assigned a function here. + * So that different controller variants can assign their own handling + * function. + */ + clk_data->set_clk_delays = sdhci_arasan_set_clk_delays; + + if (of_device_is_compatible(dev->of_node, "xlnx,zynqmp-8.9a")) { + u32 zynqmp_iclk_phase[MMC_TIMING_MMC_HS400 + 1] = + ZYNQMP_ICLK_PHASE; + u32 zynqmp_oclk_phase[MMC_TIMING_MMC_HS400 + 1] = + ZYNQMP_OCLK_PHASE; + + of_property_read_u32(dev->of_node, "xlnx,mio-bank", &mio_bank); + if (mio_bank == 2) { + zynqmp_oclk_phase[MMC_TIMING_UHS_SDR104] = 90; + zynqmp_oclk_phase[MMC_TIMING_MMC_HS200] = 90; + } + + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = zynqmp_iclk_phase[i]; + clk_data->clk_phase_out[i] = zynqmp_oclk_phase[i]; + } + } + + if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) { + u32 versal_iclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_ICLK_PHASE; + u32 versal_oclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_OCLK_PHASE; + + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = versal_iclk_phase[i]; + clk_data->clk_phase_out[i] = versal_oclk_phase[i]; + } + } + if (of_device_is_compatible(dev->of_node, "xlnx,versal-net-emmc")) { + u32 versal_net_iclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_NET_EMMC_ICLK_PHASE; + u32 versal_net_oclk_phase[MMC_TIMING_MMC_HS400 + 1] = + VERSAL_NET_EMMC_OCLK_PHASE; + + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = versal_net_iclk_phase[i]; + clk_data->clk_phase_out[i] = versal_net_oclk_phase[i]; + } + } + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY, + "clk-phase-legacy"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS, + "clk-phase-mmc-hs"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_SD_HS, + "clk-phase-sd-hs"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR12, + "clk-phase-uhs-sdr12"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR25, + "clk-phase-uhs-sdr25"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR50, + "clk-phase-uhs-sdr50"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR104, + "clk-phase-uhs-sdr104"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_DDR50, + "clk-phase-uhs-ddr50"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_DDR52, + "clk-phase-mmc-ddr52"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS200, + "clk-phase-mmc-hs200"); + arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS400, + "clk-phase-mmc-hs400"); +} + +static const struct sdhci_pltfm_data sdhci_arasan_pdata = { + .ops = &sdhci_arasan_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC, +}; + +static const struct sdhci_arasan_clk_ops arasan_clk_ops = { + .sdcardclk_ops = &arasan_sdcardclk_ops, + .sampleclk_ops = &arasan_sampleclk_ops, +}; + +static struct sdhci_arasan_of_data sdhci_arasan_generic_data = { + .pdata = &sdhci_arasan_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static const struct sdhci_pltfm_data sdhci_keembay_emmc_pdata = { + .ops = &sdhci_arasan_cqe_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_NO_LED | + SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_32BIT_ADMA_SIZE, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 | + SDHCI_QUIRK2_STOP_WITH_TC | + SDHCI_QUIRK2_BROKEN_64_BIT_DMA, +}; + +static const struct sdhci_pltfm_data sdhci_keembay_sd_pdata = { + .ops = &sdhci_arasan_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_NO_LED | + SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_32BIT_ADMA_SIZE, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON | + SDHCI_QUIRK2_STOP_WITH_TC | + SDHCI_QUIRK2_BROKEN_64_BIT_DMA, +}; + +static const struct sdhci_pltfm_data sdhci_keembay_sdio_pdata = { + .ops = &sdhci_arasan_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_NO_LED | + SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_32BIT_ADMA_SIZE, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_HOST_OFF_CARD_ON | + SDHCI_QUIRK2_BROKEN_64_BIT_DMA, +}; + +static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = { + .soc_ctl_map = &rk3399_soc_ctl_map, + .pdata = &sdhci_arasan_cqe_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static struct sdhci_arasan_of_data intel_lgm_emmc_data = { + .soc_ctl_map = &intel_lgm_emmc_soc_ctl_map, + .pdata = &sdhci_arasan_cqe_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static struct sdhci_arasan_of_data intel_lgm_sdxc_data = { + .soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map, + .pdata = &sdhci_arasan_cqe_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = { + .ops = &sdhci_arasan_ops, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC, +}; + +static const struct sdhci_pltfm_data sdhci_arasan_versal_net_pdata = { + .ops = &sdhci_arasan_ops, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN | + SDHCI_QUIRK2_STOP_WITH_TC | + SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400, +}; + +static const struct sdhci_arasan_clk_ops zynqmp_clk_ops = { + .sdcardclk_ops = &zynqmp_sdcardclk_ops, + .sampleclk_ops = &zynqmp_sampleclk_ops, +}; + +static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = { + .pdata = &sdhci_arasan_zynqmp_pdata, + .clk_ops = &zynqmp_clk_ops, + .quirks = SDHCI_ARASAN_QUIRK_ENSURE_CD_STABLE, +}; + +static const struct sdhci_arasan_clk_ops versal_clk_ops = { + .sdcardclk_ops = &versal_sdcardclk_ops, + .sampleclk_ops = &versal_sampleclk_ops, +}; + +static struct sdhci_arasan_of_data sdhci_arasan_versal_data = { + .pdata = &sdhci_arasan_zynqmp_pdata, + .clk_ops = &versal_clk_ops, + .quirks = SDHCI_ARASAN_QUIRK_ENSURE_CD_STABLE, +}; + +static const struct sdhci_arasan_clk_ops versal_net_clk_ops = { + .sdcardclk_ops = &versal_net_sdcardclk_ops, + .sampleclk_ops = &versal_net_sampleclk_ops, +}; + +static struct sdhci_arasan_of_data sdhci_arasan_versal_net_data = { + .pdata = &sdhci_arasan_versal_net_pdata, + .clk_ops = &versal_net_clk_ops, + .quirks = SDHCI_ARASAN_QUIRK_ENSURE_CD_STABLE, +}; + +static struct sdhci_arasan_of_data intel_keembay_emmc_data = { + .soc_ctl_map = &intel_keembay_soc_ctl_map, + .pdata = &sdhci_keembay_emmc_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static struct sdhci_arasan_of_data intel_keembay_sd_data = { + .soc_ctl_map = &intel_keembay_soc_ctl_map, + .pdata = &sdhci_keembay_sd_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static struct sdhci_arasan_of_data intel_keembay_sdio_data = { + .soc_ctl_map = &intel_keembay_soc_ctl_map, + .pdata = &sdhci_keembay_sdio_pdata, + .clk_ops = &arasan_clk_ops, +}; + +static const struct of_device_id sdhci_arasan_of_match[] = { + /* SoC-specific compatible strings w/ soc_ctl_map */ + { + .compatible = "rockchip,rk3399-sdhci-5.1", + .data = &sdhci_arasan_rk3399_data, + }, + { + .compatible = "intel,lgm-sdhci-5.1-emmc", + .data = &intel_lgm_emmc_data, + }, + { + .compatible = "intel,lgm-sdhci-5.1-sdxc", + .data = &intel_lgm_sdxc_data, + }, + { + .compatible = "intel,keembay-sdhci-5.1-emmc", + .data = &intel_keembay_emmc_data, + }, + { + .compatible = "intel,keembay-sdhci-5.1-sd", + .data = &intel_keembay_sd_data, + }, + { + .compatible = "intel,keembay-sdhci-5.1-sdio", + .data = &intel_keembay_sdio_data, + }, + /* Generic compatible below here */ + { + .compatible = "arasan,sdhci-8.9a", + .data = &sdhci_arasan_generic_data, + }, + { + .compatible = "arasan,sdhci-5.1", + .data = &sdhci_arasan_generic_data, + }, + { + .compatible = "arasan,sdhci-4.9a", + .data = &sdhci_arasan_generic_data, + }, + { + .compatible = "xlnx,zynqmp-8.9a", + .data = &sdhci_arasan_zynqmp_data, + }, + { + .compatible = "xlnx,versal-8.9a", + .data = &sdhci_arasan_versal_data, + }, + { + .compatible = "xlnx,versal-net-emmc", + .data = &sdhci_arasan_versal_net_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match); + +/** + * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use * * @sdhci_arasan: Our private data structure. * @clk_xin: Pointer to the functional clock * @dev: Pointer to our struct device. - * Returns 0 on success and error value on error + * + * Some PHY devices need to know what the actual card clock is. In order for + * them to find out, we'll provide a clock through the common clock framework + * for them to query. + * + * Return: 0 on success and error value on error */ -static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, - struct clk *clk_xin, - struct device *dev) +static int +sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) { + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; struct device_node *np = dev->of_node; struct clk_init_data sdcardclk_init; const char *parent_clk_name; int ret; - /* Providing a clock to the PHY is optional; no error if missing */ - if (!of_find_property(np, "#clock-cells", NULL)) - return 0; - ret = of_property_read_string_index(np, "clock-output-names", 0, &sdcardclk_init.name); if (ret) { @@ -642,17 +1602,71 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, sdcardclk_init.parent_names = &parent_clk_name; sdcardclk_init.num_parents = 1; sdcardclk_init.flags = CLK_GET_RATE_NOCACHE; - sdcardclk_init.ops = &arasan_sdcardclk_ops; + sdcardclk_init.ops = sdhci_arasan->clk_ops->sdcardclk_ops; - sdhci_arasan->sdcardclk_hw.init = &sdcardclk_init; - sdhci_arasan->sdcardclk = - devm_clk_register(dev, &sdhci_arasan->sdcardclk_hw); - sdhci_arasan->sdcardclk_hw.init = NULL; + clk_data->sdcardclk_hw.init = &sdcardclk_init; + clk_data->sdcardclk = + devm_clk_register(dev, &clk_data->sdcardclk_hw); + if (IS_ERR(clk_data->sdcardclk)) + return PTR_ERR(clk_data->sdcardclk); + clk_data->sdcardclk_hw.init = NULL; ret = of_clk_add_provider(np, of_clk_src_simple_get, - sdhci_arasan->sdcardclk); + clk_data->sdcardclk); if (ret) - dev_err(dev, "Failed to add clock provider\n"); + dev_err(dev, "Failed to add sdcard clock provider\n"); + + return ret; +} + +/** + * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use + * + * @sdhci_arasan: Our private data structure. + * @clk_xin: Pointer to the functional clock + * @dev: Pointer to our struct device. + * + * Some PHY devices need to know what the actual card clock is. In order for + * them to find out, we'll provide a clock through the common clock framework + * for them to query. + * + * Return: 0 on success and error value on error + */ +static int +sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) +{ + struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data; + struct device_node *np = dev->of_node; + struct clk_init_data sampleclk_init; + const char *parent_clk_name; + int ret; + + ret = of_property_read_string_index(np, "clock-output-names", 1, + &sampleclk_init.name); + if (ret) { + dev_err(dev, "DT has #clock-cells but no clock-output-names\n"); + return ret; + } + + parent_clk_name = __clk_get_name(clk_xin); + sampleclk_init.parent_names = &parent_clk_name; + sampleclk_init.num_parents = 1; + sampleclk_init.flags = CLK_GET_RATE_NOCACHE; + sampleclk_init.ops = sdhci_arasan->clk_ops->sampleclk_ops; + + clk_data->sampleclk_hw.init = &sampleclk_init; + clk_data->sampleclk = + devm_clk_register(dev, &clk_data->sampleclk_hw); + if (IS_ERR(clk_data->sampleclk)) + return PTR_ERR(clk_data->sampleclk); + clk_data->sampleclk_hw.init = NULL; + + ret = of_clk_add_provider(np, of_clk_src_simple_get, + clk_data->sampleclk); + if (ret) + dev_err(dev, "Failed to add sample clock provider\n"); return ret; } @@ -660,21 +1674,163 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, /** * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk() * + * @dev: Pointer to our struct device. + * * Should be called any time we're exiting and sdhci_arasan_register_sdclk() * returned success. - * - * @dev: Pointer to our struct device. */ static void sdhci_arasan_unregister_sdclk(struct device *dev) { struct device_node *np = dev->of_node; - if (!of_find_property(np, "#clock-cells", NULL)) + if (!of_property_present(np, "#clock-cells")) return; of_clk_del_provider(dev->of_node); } +/** + * sdhci_arasan_update_support64b - Set SUPPORT_64B (64-bit System Bus Support) + * @host: The sdhci_host + * @value: The value to write + * + * This should be set based on the System Address Bus. + * 0: the Core supports only 32-bit System Address Bus. + * 1: the Core supports 64-bit System Address Bus. + * + * NOTE: + * For Keem Bay, it is required to clear this bit. Its default value is 1'b1. + * Keem Bay does not support 64-bit access. + */ +static void sdhci_arasan_update_support64b(struct sdhci_host *host, u32 value) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); + const struct sdhci_arasan_soc_ctl_map *soc_ctl_map; + + /* Having a map is optional */ + soc_ctl_map = sdhci_arasan->soc_ctl_map; + if (!soc_ctl_map) + return; + + /* If we have a map, we expect to have a syscon */ + if (!sdhci_arasan->soc_ctl_base) { + pr_warn("%s: Have regmap, but no soc-ctl-syscon\n", + mmc_hostname(host->mmc)); + return; + } + + sdhci_arasan_syscon_write(host, &soc_ctl_map->support64b, value); +} + +/** + * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use + * + * @sdhci_arasan: Our private data structure. + * @clk_xin: Pointer to the functional clock + * @dev: Pointer to our struct device. + * + * Some PHY devices need to know what the actual card clock is. In order for + * them to find out, we'll provide a clock through the common clock framework + * for them to query. + * + * Note: without seriously re-architecting SDHCI's clock code and testing on + * all platforms, there's no way to create a totally beautiful clock here + * with all clock ops implemented. Instead, we'll just create a clock that can + * be queried and set the CLK_GET_RATE_NOCACHE attribute to tell common clock + * framework that we're doing things behind its back. This should be sufficient + * to create nice clean device tree bindings and later (if needed) we can try + * re-architecting SDHCI if we see some benefit to it. + * + * Return: 0 on success and error value on error + */ +static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan, + struct clk *clk_xin, + struct device *dev) +{ + struct device_node *np = dev->of_node; + u32 num_clks = 0; + int ret; + + /* Providing a clock to the PHY is optional; no error if missing */ + if (of_property_read_u32(np, "#clock-cells", &num_clks) < 0) + return 0; + + ret = sdhci_arasan_register_sdcardclk(sdhci_arasan, clk_xin, dev); + if (ret) + return ret; + + if (num_clks) { + ret = sdhci_arasan_register_sampleclk(sdhci_arasan, clk_xin, + dev); + if (ret) { + sdhci_arasan_unregister_sdclk(dev); + return ret; + } + } + + return 0; +} + +static int sdhci_zynqmp_set_dynamic_config(struct device *dev, + struct sdhci_arasan_data *sdhci_arasan) +{ + struct sdhci_host *host = sdhci_arasan->host; + struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + const char *clk_name = clk_hw_get_name(hw); + u32 mhz, node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1; + struct reset_control *rstc; + int ret; + + /* Obtain SDHC reset control */ + rstc = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(rstc)) { + dev_err(dev, "Cannot get SDHC reset.\n"); + return PTR_ERR(rstc); + } + + ret = reset_control_assert(rstc); + if (ret) + return ret; + + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_FIXED, 0); + if (ret) + return ret; + + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_EMMC_SEL, + !!(host->mmc->caps & MMC_CAP_NONREMOVABLE)); + if (ret) + return ret; + + mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000); + if (mhz > 100 && mhz <= 200) + mhz = 200; + else if (mhz > 50 && mhz <= 100) + mhz = 100; + else if (mhz > 25 && mhz <= 50) + mhz = 50; + else + mhz = 25; + + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_BASECLK, mhz); + if (ret) + return ret; + + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_8BIT, + !!(host->mmc->caps & MMC_CAP_8_BIT_DATA)); + if (ret) + return ret; + + ret = reset_control_deassert(rstc); + if (ret) + return ret; + + usleep_range(1000, 1500); + + return 0; +} + static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan) { struct sdhci_host *host = sdhci_arasan->host; @@ -721,17 +1877,20 @@ cleanup: static int sdhci_arasan_probe(struct platform_device *pdev) { int ret; - const struct of_device_id *match; struct device_node *node; struct clk *clk_xin; + struct clk *clk_dll; struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; struct sdhci_arasan_data *sdhci_arasan; - struct device_node *np = pdev->dev.of_node; const struct sdhci_arasan_of_data *data; - match = of_match_node(sdhci_arasan_of_match, pdev->dev.of_node); - data = match->data; + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + host = sdhci_pltfm_init(pdev, data->pdata, sizeof(*sdhci_arasan)); if (IS_ERR(host)) @@ -742,48 +1901,55 @@ static int sdhci_arasan_probe(struct platform_device *pdev) sdhci_arasan->host = host; sdhci_arasan->soc_ctl_map = data->soc_ctl_map; + sdhci_arasan->clk_ops = data->clk_ops; - node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0); + node = of_parse_phandle(np, "arasan,soc-ctl-syscon", 0); if (node) { sdhci_arasan->soc_ctl_base = syscon_node_to_regmap(node); of_node_put(node); - if (IS_ERR(sdhci_arasan->soc_ctl_base)) { - ret = PTR_ERR(sdhci_arasan->soc_ctl_base); - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "Can't get syscon: %d\n", - ret); - goto err_pltfm_free; - } + if (IS_ERR(sdhci_arasan->soc_ctl_base)) + return dev_err_probe(dev, + PTR_ERR(sdhci_arasan->soc_ctl_base), + "Can't get syscon\n"); } - sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb"); - if (IS_ERR(sdhci_arasan->clk_ahb)) { - dev_err(&pdev->dev, "clk_ahb clock not found.\n"); - ret = PTR_ERR(sdhci_arasan->clk_ahb); - goto err_pltfm_free; - } + sdhci_get_of_property(pdev); - clk_xin = devm_clk_get(&pdev->dev, "clk_xin"); - if (IS_ERR(clk_xin)) { - dev_err(&pdev->dev, "clk_xin clock not found.\n"); - ret = PTR_ERR(clk_xin); - goto err_pltfm_free; - } + sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb"); + if (IS_ERR(sdhci_arasan->clk_ahb)) + return dev_err_probe(dev, PTR_ERR(sdhci_arasan->clk_ahb), + "clk_ahb clock not found.\n"); + + clk_xin = devm_clk_get(dev, "clk_xin"); + if (IS_ERR(clk_xin)) + return dev_err_probe(dev, PTR_ERR(clk_xin), "clk_xin clock not found.\n"); ret = clk_prepare_enable(sdhci_arasan->clk_ahb); - if (ret) { - dev_err(&pdev->dev, "Unable to enable AHB clock.\n"); - goto err_pltfm_free; + if (ret) + return dev_err_probe(dev, ret, "Unable to enable AHB clock.\n"); + + /* If clock-frequency property is set, use the provided value */ + if (pltfm_host->clock && + pltfm_host->clock != clk_get_rate(clk_xin)) { + ret = clk_set_rate(clk_xin, pltfm_host->clock); + if (ret) { + dev_err(&pdev->dev, "Failed to set SD clock rate\n"); + goto clk_dis_ahb; + } } ret = clk_prepare_enable(clk_xin); if (ret) { - dev_err(&pdev->dev, "Unable to enable SD clock.\n"); + dev_err(dev, "Unable to enable SD clock.\n"); goto clk_dis_ahb; } - sdhci_get_of_property(pdev); + clk_dll = devm_clk_get_optional_enabled(dev, "gate"); + if (IS_ERR(clk_dll)) { + ret = dev_err_probe(dev, PTR_ERR(clk_dll), "failed to get dll clk\n"); + goto clk_disable_all; + } if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST; @@ -793,37 +1959,63 @@ static int sdhci_arasan_probe(struct platform_device *pdev) pltfm_host->clk = clk_xin; - if (of_device_is_compatible(pdev->dev.of_node, - "rockchip,rk3399-sdhci-5.1")) + if (of_device_is_compatible(np, "rockchip,rk3399-sdhci-5.1")) sdhci_arasan_update_clockmultiplier(host, 0x0); + sdhci_arasan->quirks |= data->quirks; + + if (of_device_is_compatible(np, "intel,keembay-sdhci-5.1-emmc") || + of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sd") || + of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sdio")) { + sdhci_arasan_update_clockmultiplier(host, 0x0); + sdhci_arasan_update_support64b(host, 0x0); + + host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; + } + sdhci_arasan_update_baseclkfreq(host); - ret = sdhci_arasan_register_sdclk(sdhci_arasan, clk_xin, &pdev->dev); + ret = sdhci_arasan_register_sdclk(sdhci_arasan, clk_xin, dev); if (ret) goto clk_disable_all; + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) { + host->mmc_host_ops.execute_tuning = + arasan_zynqmp_execute_tuning; + + sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN; + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + } + + arasan_dt_parse_clk_phases(dev, &sdhci_arasan->clk_data); + ret = mmc_of_parse(host->mmc); if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "parsing dt failed (%d)\n", ret); + dev_err_probe(dev, ret, "parsing dt failed.\n"); goto unreg_clk; } + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) { + ret = zynqmp_pm_is_function_supported(PM_IOCTL, IOCTL_SET_SD_CONFIG); + if (!ret) { + ret = sdhci_zynqmp_set_dynamic_config(dev, sdhci_arasan); + if (ret) + goto unreg_clk; + } + } + sdhci_arasan->phy = ERR_PTR(-ENODEV); - if (of_device_is_compatible(pdev->dev.of_node, - "arasan,sdhci-5.1")) { - sdhci_arasan->phy = devm_phy_get(&pdev->dev, - "phy_arasan"); + if (of_device_is_compatible(np, "arasan,sdhci-5.1")) { + sdhci_arasan->phy = devm_phy_get(dev, "phy_arasan"); if (IS_ERR(sdhci_arasan->phy)) { - ret = PTR_ERR(sdhci_arasan->phy); - dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n"); + ret = dev_err_probe(dev, PTR_ERR(sdhci_arasan->phy), + "No phy for arasan,sdhci-5.1.\n"); goto unreg_clk; } ret = phy_init(sdhci_arasan->phy); if (ret < 0) { - dev_err(&pdev->dev, "phy_init err.\n"); + dev_err(dev, "phy_init err.\n"); goto unreg_clk; } @@ -832,9 +2024,15 @@ static int sdhci_arasan_probe(struct platform_device *pdev) host->mmc_host_ops.start_signal_voltage_switch = sdhci_arasan_voltage_switch; sdhci_arasan->has_cqe = true; - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + host->mmc->caps2 |= MMC_CAP2_CQE; + + if (!of_property_read_bool(np, "disable-cqe-dcmd")) + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD; } + if (of_device_is_compatible(np, "xlnx,versal-net-emmc")) + sdhci_arasan->internal_phy_reg = true; + ret = sdhci_arasan_add_host(sdhci_arasan); if (ret) goto err_add_host; @@ -845,23 +2043,21 @@ err_add_host: if (!IS_ERR(sdhci_arasan->phy)) phy_exit(sdhci_arasan->phy); unreg_clk: - sdhci_arasan_unregister_sdclk(&pdev->dev); + sdhci_arasan_unregister_sdclk(dev); clk_disable_all: clk_disable_unprepare(clk_xin); clk_dis_ahb: clk_disable_unprepare(sdhci_arasan->clk_ahb); -err_pltfm_free: - sdhci_pltfm_free(pdev); return ret; } -static int sdhci_arasan_remove(struct platform_device *pdev) +static void sdhci_arasan_remove(struct platform_device *pdev) { - int ret; struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host); struct clk *clk_ahb = sdhci_arasan->clk_ahb; + struct clk *clk_xin = pltfm_host->clk; if (!IS_ERR(sdhci_arasan->phy)) { if (sdhci_arasan->is_phy_on) @@ -871,18 +2067,18 @@ static int sdhci_arasan_remove(struct platform_device *pdev) sdhci_arasan_unregister_sdclk(&pdev->dev); - ret = sdhci_pltfm_unregister(pdev); + sdhci_pltfm_remove(pdev); + clk_disable_unprepare(clk_xin); clk_disable_unprepare(clk_ahb); - - return ret; } static struct platform_driver sdhci_arasan_driver = { .driver = { .name = "sdhci-arasan", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, .of_match_table = sdhci_arasan_of_match, - .pm = &sdhci_arasan_dev_pm_ops, + .pm = pm_sleep_ptr(&sdhci_arasan_dev_pm_ops), }, .probe = sdhci_arasan_probe, .remove = sdhci_arasan_remove, |