diff options
Diffstat (limited to 'drivers/mmc/host/tmio_mmc_core.c')
-rw-r--r-- | drivers/mmc/host/tmio_mmc_core.c | 30 |
1 files changed, 11 insertions, 19 deletions
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 93e912afd3ae..b71241f55df5 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -31,13 +31,14 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/mfd/tmio.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/slot-gpio.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pagemap.h> +#include <linux/platform_data/tmio.h> #include <linux/platform_device.h> #include <linux/pm_qos.h> #include <linux/pm_runtime.h> @@ -296,7 +297,6 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; case MMC_RSP_R1: - case MMC_RSP_R1_NO_CRC: c |= RESP_R1; break; case MMC_RSP_R1B: c |= RESP_R1B; break; case MMC_RSP_R2: c |= RESP_R2; break; @@ -608,7 +608,7 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) } else { tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP); - tasklet_schedule(&host->dma_issue); + queue_work(system_bh_wq, &host->dma_issue); } } else { if (!host->dma_on) { @@ -616,7 +616,7 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) } else { tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_WRITEOP); - tasklet_schedule(&host->dma_issue); + queue_work(system_bh_wq, &host->dma_issue); } } } else { @@ -880,9 +880,6 @@ static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) /* .set_ios() is returning void, so, no chance to report an error */ - if (host->set_pwr) - host->set_pwr(host->pdev, 1); - if (!IS_ERR(mmc->supply.vmmc)) { ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); /* @@ -897,8 +894,8 @@ static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) * It seems, VccQ should be switched on after Vcc, this is also what the * omap_hsmmc.c driver does. */ - if (!IS_ERR(mmc->supply.vqmmc) && !ret) { - ret = regulator_enable(mmc->supply.vqmmc); + if (!ret) { + ret = mmc_regulator_enable_vqmmc(mmc); usleep_range(200, 300); } @@ -911,14 +908,10 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host) { struct mmc_host *mmc = host->mmc; - if (!IS_ERR(mmc->supply.vqmmc)) - regulator_disable(mmc->supply.vqmmc); + mmc_regulator_disable_vqmmc(mmc); if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); - - if (host->set_pwr) - host->set_pwr(host->pdev, 0); } static unsigned int tmio_mmc_get_timeout_cycles(struct tmio_mmc_host *host) @@ -1160,8 +1153,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) if (pdata->flags & TMIO_MMC_USE_BUSY_TIMEOUT && !_host->get_timeout_cycles) _host->get_timeout_cycles = tmio_mmc_get_timeout_cycles; - _host->set_pwr = pdata->set_pwr; - ret = tmio_mmc_init_ocr(_host); if (ret < 0) return ret; @@ -1185,14 +1176,14 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) dma_max_mapping_size(&pdev->dev)); mmc->max_seg_size = mmc->max_req_size; - if (mmc_can_gpio_ro(mmc)) + if (mmc_host_can_gpio_ro(mmc)) _host->ops.get_ro = mmc_gpio_get_ro; - if (mmc_can_gpio_cd(mmc)) + if (mmc_host_can_gpio_cd(mmc)) _host->ops.get_cd = mmc_gpio_get_cd; /* must be set before tmio_mmc_reset() */ - _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || + _host->native_hotplug = !(mmc_host_can_gpio_cd(mmc) || mmc->caps & MMC_CAP_NEEDS_POLL || !mmc_card_is_removable(mmc)); @@ -1319,4 +1310,5 @@ int tmio_mmc_host_runtime_resume(struct device *dev) EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_resume); #endif +MODULE_DESCRIPTION("TMIO MMC core driver"); MODULE_LICENSE("GPL v2"); |