diff options
Diffstat (limited to 'drivers/mtd/nand/raw/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 172 |
1 files changed, 77 insertions, 95 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 113f61052269..7408f34f0c68 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -1,20 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only -config MTD_NAND_ECC_SW_HAMMING - tristate - -config MTD_NAND_ECC_SW_HAMMING_SMC - bool "NAND ECC Smart Media byte order" - depends on MTD_NAND_ECC_SW_HAMMING - default n - help - Software ECC according to the Smart Media Specification. - The original Linux implementation had byte 0 and 1 swapped. - menuconfig MTD_RAW_NAND tristate "Raw/Parallel NAND Device Support" - depends on MTD select MTD_NAND_CORE - select MTD_NAND_ECC_SW_HAMMING + select MTD_NAND_ECC help This enables support for accessing all type of raw/parallel NAND flash devices. For further information see @@ -22,16 +10,6 @@ menuconfig MTD_RAW_NAND if MTD_RAW_NAND -config MTD_NAND_ECC_SW_BCH - bool "Support software BCH ECC" - select BCH - default n - help - This enables support for software BCH error correction. Binary BCH - codes are more powerful and cpu intensive than traditional Hamming - ECC codes. They are used with NAND devices requiring more than 1 bit - of error correction. - comment "Raw/parallel NAND flash controllers" config MTD_NAND_DENALI @@ -48,7 +26,7 @@ config MTD_NAND_DENALI_PCI config MTD_NAND_DENALI_DT tristate "Denali NAND controller as a DT device" select MTD_NAND_DENALI - depends on HAS_DMA && HAVE_CLK && OF + depends on HAS_DMA && HAVE_CLK && OF && HAS_IOMEM help Enable the driver for NAND flash on platforms using a Denali NAND controller as a DT device. @@ -56,14 +34,15 @@ config MTD_NAND_DENALI_DT config MTD_NAND_AMS_DELTA tristate "Amstrad E3 NAND controller" depends on MACH_AMS_DELTA || COMPILE_TEST - default y + default MACH_AMS_DELTA help Support for NAND flash on Amstrad E3 (Delta). config MTD_NAND_OMAP2 tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller" - depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on HAS_IOMEM + depends on OMAP_GPMC help Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 and Keystone platforms. @@ -93,43 +72,11 @@ config MTD_NAND_AU1550 config MTD_NAND_NDFC tristate "IBM/MCC 4xx NAND controller" depends on 4xx + select MTD_NAND_ECC_SW_HAMMING select MTD_NAND_ECC_SW_HAMMING_SMC help NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs -config MTD_NAND_S3C2410 - tristate "Samsung S3C NAND controller" - depends on ARCH_S3C24XX || ARCH_S3C64XX - help - This enables the NAND flash controller on the S3C24xx and S3C64xx - SoCs - - No board specific support is done by this driver, each board - must advertise a platform_device for the driver to attach. - -config MTD_NAND_S3C2410_DEBUG - bool "Samsung S3C NAND controller debug" - depends on MTD_NAND_S3C2410 - help - Enable debugging of the S3C NAND driver - -config MTD_NAND_S3C2410_CLKSTOP - bool "Samsung S3C NAND IDLE clock stop" - depends on MTD_NAND_S3C2410 - default n - help - Stop the clock to the NAND controller when there is no chip - selected to save power. This will mean there is a small delay - when the is NAND chip selected or released, but will save - approximately 5mA of power when there is nothing happening. - -config MTD_NAND_TANGO - tristate "Tango NAND controller" - depends on ARCH_TANGO || COMPILE_TEST - depends on HAS_IOMEM - help - Enables the NAND Flash controller on Tango chips. - config MTD_NAND_SHARPSL tristate "Sharp SL Series (C7xx + others) NAND controller" depends on ARCH_PXA || COMPILE_TEST @@ -187,7 +134,7 @@ config MTD_NAND_MARVELL including: - PXA3xx processors (NFCv1) - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2) - - 64-bit Aramda platforms (7k, 8k) (NFCv2) + - 64-bit Aramda platforms (7k, 8k, ac5) (NFCv2) config MTD_NAND_SLC_LPC32XX tristate "NXP LPC32xx SLC NAND controller" @@ -220,21 +167,7 @@ config MTD_NAND_PASEMI Enables support for NAND Flash interface on PA Semi PWRficient based boards -config MTD_NAND_TMIO - tristate "Toshiba Mobile IO NAND controller" - depends on MFD_TMIO - help - Support for NAND flash connected to a Toshiba Mobile IO - Controller in some PDAs, including the Sharp SL6000x. - -config MTD_NAND_BRCMNAND - tristate "Broadcom STB NAND controller" - depends on ARM || ARM64 || MIPS || COMPILE_TEST - depends on HAS_IOMEM - help - Enables the Broadcom NAND controller driver. The controller was - originally designed for Set-Top Box but is used on various BCM7xxx, - BCM3xxx, BCM63xxx, iProc/Cygnus and more. +source "drivers/mtd/nand/raw/brcmnand/Kconfig" config MTD_NAND_BCM47XXNFLASH tristate "BCM4706 BCMA NAND controller" @@ -245,13 +178,6 @@ config MTD_NAND_BCM47XXNFLASH registered by bcma as platform devices. This enables driver for NAND flash memories. For now only BCM4706 is supported. -config MTD_NAND_OXNAS - tristate "Oxford Semiconductor NAND controller" - depends on ARCH_OXNAS || COMPILE_TEST - depends on HAS_IOMEM - help - This enables the NAND flash controller on Oxford Semiconductor SoCs. - config MTD_NAND_MPC5121_NFC tristate "MPC5121 NAND controller" depends on PPC_MPC512x @@ -282,8 +208,7 @@ config MTD_NAND_FSL_IFC tristate "Freescale IFC NAND controller" depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST depends on HAS_IOMEM - select FSL_IFC - select MEMORY + depends on FSL_IFC help Various Freescale chips e.g P1010, include a NAND Flash machine with built-in hardware ECC capabilities. @@ -313,7 +238,7 @@ config MTD_NAND_VF610_NFC config MTD_NAND_MXC tristate "Freescale MXC NAND controller" depends on ARCH_MXC || COMPILE_TEST - depends on HAS_IOMEM + depends on HAS_IOMEM && OF help This enables the driver for the NAND flash controller on the MXC processors. @@ -328,15 +253,15 @@ config MTD_NAND_SH_FLCTL config MTD_NAND_DAVINCI tristate "DaVinci/Keystone NAND controller" - depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST - depends on HAS_IOMEM + depends on COMPILE_TEST || ARCH_DAVINCI || ARCH_KEYSTONE + depends on HAS_IOMEM && TI_AEMIF help Enable the driver for NAND flash chips on Texas Instruments DaVinci/Keystone processors. config MTD_NAND_TXX9NDFMC tristate "TXx9 NAND controller" - depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST + depends on SOC_TX4938 || COMPILE_TEST depends on HAS_IOMEM help This enables the NAND flash controller on the TXx9 SoCs. @@ -352,8 +277,7 @@ source "drivers/mtd/nand/raw/ingenic/Kconfig" config MTD_NAND_FSMC tristate "ST Micros FSMC NAND controller" depends on OF && HAS_IOMEM - depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \ - COMPILE_TEST + depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST help Enables support for NAND Flash chips on the ST Microelectronics Flexible Static Memory Controller (FSMC) @@ -389,6 +313,7 @@ config MTD_NAND_QCOM config MTD_NAND_MTK tristate "MTK NAND controller" + depends on MTD_NAND_ECC_MEDIATEK depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM help @@ -414,7 +339,8 @@ config MTD_NAND_TEGRA config MTD_NAND_STM32_FMC2 tristate "Support for NAND controller on STM32MP SoCs" - depends on MACH_STM32MP157 || COMPILE_TEST + depends on ARCH_STM32 || COMPILE_TEST + select MFD_SYSCON help Enables support for NAND Flash chips on SoCs containing the FMC2 NAND controller. This controller is found on STM32MP SoCs. @@ -423,7 +349,7 @@ config MTD_NAND_STM32_FMC2 config MTD_NAND_MESON tristate "Support for NAND controller on Amlogic's Meson SoCs" - depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK && (ARCH_MESON || COMPILE_TEST) select MFD_SYSCON help Enables support for NAND controller on Amlogic's Meson SoCs. @@ -448,7 +374,7 @@ config MTD_NAND_PLATFORM config MTD_NAND_CADENCE tristate "Support Cadence NAND (HPNFC) controller" - depends on (OF || COMPILE_TEST) && HAS_IOMEM + depends on OF && HAS_IOMEM help Enable the driver for NAND flash on platforms using a Cadence NAND controller. @@ -461,6 +387,62 @@ config MTD_NAND_ARASAN Enables the driver for the Arasan NAND flash controller on Zynq Ultrascale+ MPSoC. +config MTD_NAND_INTEL_LGM + tristate "Support for NAND controller on Intel LGM SoC" + depends on OF + depends on HAS_IOMEM + help + Enables support for NAND Flash chips on Intel's LGM SoC. + NAND flash controller interfaced through the External Bus Unit. + +config MTD_NAND_ROCKCHIP + tristate "Rockchip NAND controller" + depends on ARCH_ROCKCHIP && HAS_IOMEM + help + Enables support for NAND controller on Rockchip SoCs. + There are four different versions of NAND FLASH Controllers, + including: + NFC v600: RK2928, RK3066, RK3188 + NFC v622: RK3036, RK3128 + NFC v800: RK3308, RV1108 + NFC v900: PX30, RK3326 + +config MTD_NAND_PL35X + tristate "ARM PL35X NAND controller" + depends on OF + depends on PL353_SMC + help + Enables support for PrimeCell SMC PL351 and PL353 NAND + controller found on Zynq7000. + +config MTD_NAND_RENESAS + tristate "Renesas R-Car Gen3 & RZ/N1 NAND controller" + depends on ARCH_RENESAS || COMPILE_TEST + help + Enables support for the NAND controller found on Renesas R-Car + Gen3 and RZ/N1 SoC families. + +config MTD_NAND_TS72XX + tristate "ts72xx NAND controller" + depends on ARCH_EP93XX && HAS_IOMEM + help + Enables support for NAND controller on ts72xx SBCs. + +config MTD_NAND_NUVOTON_MA35 + tristate "Nuvoton MA35 SoC NAND controller" + depends on ARCH_MA35 || COMPILE_TEST + depends on OF + help + Enables support for the NAND controller found on + the Nuvoton MA35 series SoCs. + +config MTD_NAND_LOONGSON + tristate "Loongson NAND controller" + depends on LOONGSON1_APB_DMA || LOONGSON2_APB_DMA || COMPILE_TEST + select REGMAP_MMIO + help + Enables support for NAND controller on Loongson family chips. + comment "Misc" config MTD_SM_COMMON @@ -480,9 +462,9 @@ config MTD_NAND_RICOH select MTD_SM_COMMON help Enable support for Ricoh R5C852 xD card reader - You also need to enable ether + You also need to enable either NAND SSFDC (SmartMedia) read only translation layer' or new - expermental, readwrite + experimental, readwrite 'SmartMedia/xD new translation layer' config MTD_NAND_DISKONCHIP |