diff options
Diffstat (limited to 'drivers/mtd/nand/raw/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 110 |
1 files changed, 46 insertions, 64 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 630728de4b7c..7408f34f0c68 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -26,7 +26,7 @@ config MTD_NAND_DENALI_PCI config MTD_NAND_DENALI_DT tristate "Denali NAND controller as a DT device" select MTD_NAND_DENALI - depends on HAS_DMA && HAVE_CLK && OF + depends on HAS_DMA && HAVE_CLK && OF && HAS_IOMEM help Enable the driver for NAND flash on platforms using a Denali NAND controller as a DT device. @@ -34,14 +34,15 @@ config MTD_NAND_DENALI_DT config MTD_NAND_AMS_DELTA tristate "Amstrad E3 NAND controller" depends on MACH_AMS_DELTA || COMPILE_TEST - default y + default MACH_AMS_DELTA help Support for NAND flash on Amstrad E3 (Delta). config MTD_NAND_OMAP2 tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller" - depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST depends on HAS_IOMEM + depends on OMAP_GPMC help Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 and Keystone platforms. @@ -76,32 +77,6 @@ config MTD_NAND_NDFC help NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs -config MTD_NAND_S3C2410 - tristate "Samsung S3C NAND controller" - depends on ARCH_S3C24XX || ARCH_S3C64XX - help - This enables the NAND flash controller on the S3C24xx and S3C64xx - SoCs - - No board specific support is done by this driver, each board - must advertise a platform_device for the driver to attach. - -config MTD_NAND_S3C2410_DEBUG - bool "Samsung S3C NAND controller debug" - depends on MTD_NAND_S3C2410 - help - Enable debugging of the S3C NAND driver - -config MTD_NAND_S3C2410_CLKSTOP - bool "Samsung S3C NAND IDLE clock stop" - depends on MTD_NAND_S3C2410 - default n - help - Stop the clock to the NAND controller when there is no chip - selected to save power. This will mean there is a small delay - when the is NAND chip selected or released, but will save - approximately 5mA of power when there is nothing happening. - config MTD_NAND_SHARPSL tristate "Sharp SL Series (C7xx + others) NAND controller" depends on ARCH_PXA || COMPILE_TEST @@ -159,7 +134,7 @@ config MTD_NAND_MARVELL including: - PXA3xx processors (NFCv1) - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2) - - 64-bit Aramda platforms (7k, 8k) (NFCv2) + - 64-bit Aramda platforms (7k, 8k, ac5) (NFCv2) config MTD_NAND_SLC_LPC32XX tristate "NXP LPC32xx SLC NAND controller" @@ -192,21 +167,7 @@ config MTD_NAND_PASEMI Enables support for NAND Flash interface on PA Semi PWRficient based boards -config MTD_NAND_TMIO - tristate "Toshiba Mobile IO NAND controller" - depends on MFD_TMIO - help - Support for NAND flash connected to a Toshiba Mobile IO - Controller in some PDAs, including the Sharp SL6000x. - -config MTD_NAND_BRCMNAND - tristate "Broadcom STB NAND controller" - depends on ARM || ARM64 || MIPS || COMPILE_TEST - depends on HAS_IOMEM - help - Enables the Broadcom NAND controller driver. The controller was - originally designed for Set-Top Box but is used on various BCM7xxx, - BCM3xxx, BCM63xxx, iProc/Cygnus and more. +source "drivers/mtd/nand/raw/brcmnand/Kconfig" config MTD_NAND_BCM47XXNFLASH tristate "BCM4706 BCMA NAND controller" @@ -217,13 +178,6 @@ config MTD_NAND_BCM47XXNFLASH registered by bcma as platform devices. This enables driver for NAND flash memories. For now only BCM4706 is supported. -config MTD_NAND_OXNAS - tristate "Oxford Semiconductor NAND controller" - depends on ARCH_OXNAS || COMPILE_TEST - depends on HAS_IOMEM - help - This enables the NAND flash controller on Oxford Semiconductor SoCs. - config MTD_NAND_MPC5121_NFC tristate "MPC5121 NAND controller" depends on PPC_MPC512x @@ -254,8 +208,7 @@ config MTD_NAND_FSL_IFC tristate "Freescale IFC NAND controller" depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST depends on HAS_IOMEM - select FSL_IFC - select MEMORY + depends on FSL_IFC help Various Freescale chips e.g P1010, include a NAND Flash machine with built-in hardware ECC capabilities. @@ -300,15 +253,15 @@ config MTD_NAND_SH_FLCTL config MTD_NAND_DAVINCI tristate "DaVinci/Keystone NAND controller" - depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST - depends on HAS_IOMEM + depends on COMPILE_TEST || ARCH_DAVINCI || ARCH_KEYSTONE + depends on HAS_IOMEM && TI_AEMIF help Enable the driver for NAND flash chips on Texas Instruments DaVinci/Keystone processors. config MTD_NAND_TXX9NDFMC tristate "TXx9 NAND controller" - depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST + depends on SOC_TX4938 || COMPILE_TEST depends on HAS_IOMEM help This enables the NAND flash controller on the TXx9 SoCs. @@ -360,6 +313,7 @@ config MTD_NAND_QCOM config MTD_NAND_MTK tristate "MTK NAND controller" + depends on MTD_NAND_ECC_MEDIATEK depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM help @@ -385,7 +339,7 @@ config MTD_NAND_TEGRA config MTD_NAND_STM32_FMC2 tristate "Support for NAND controller on STM32MP SoCs" - depends on MACH_STM32MP157 || COMPILE_TEST + depends on ARCH_STM32 || COMPILE_TEST select MFD_SYSCON help Enables support for NAND Flash chips on SoCs containing the FMC2 @@ -395,7 +349,7 @@ config MTD_NAND_STM32_FMC2 config MTD_NAND_MESON tristate "Support for NAND controller on Amlogic's Meson SoCs" - depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK && (ARCH_MESON || COMPILE_TEST) select MFD_SYSCON help Enables support for NAND controller on Amlogic's Meson SoCs. @@ -420,7 +374,7 @@ config MTD_NAND_PLATFORM config MTD_NAND_CADENCE tristate "Support Cadence NAND (HPNFC) controller" - depends on (OF || COMPILE_TEST) && HAS_IOMEM + depends on OF && HAS_IOMEM help Enable the driver for NAND flash on platforms using a Cadence NAND controller. @@ -435,7 +389,7 @@ config MTD_NAND_ARASAN config MTD_NAND_INTEL_LGM tristate "Support for NAND controller on Intel LGM SoC" - depends on OF || COMPILE_TEST + depends on OF depends on HAS_IOMEM help Enables support for NAND Flash chips on Intel's LGM SoC. @@ -455,12 +409,40 @@ config MTD_NAND_ROCKCHIP config MTD_NAND_PL35X tristate "ARM PL35X NAND controller" - depends on OF || COMPILE_TEST + depends on OF depends on PL353_SMC help Enables support for PrimeCell SMC PL351 and PL353 NAND controller found on Zynq7000. +config MTD_NAND_RENESAS + tristate "Renesas R-Car Gen3 & RZ/N1 NAND controller" + depends on ARCH_RENESAS || COMPILE_TEST + help + Enables support for the NAND controller found on Renesas R-Car + Gen3 and RZ/N1 SoC families. + +config MTD_NAND_TS72XX + tristate "ts72xx NAND controller" + depends on ARCH_EP93XX && HAS_IOMEM + help + Enables support for NAND controller on ts72xx SBCs. + +config MTD_NAND_NUVOTON_MA35 + tristate "Nuvoton MA35 SoC NAND controller" + depends on ARCH_MA35 || COMPILE_TEST + depends on OF + help + Enables support for the NAND controller found on + the Nuvoton MA35 series SoCs. + +config MTD_NAND_LOONGSON + tristate "Loongson NAND controller" + depends on LOONGSON1_APB_DMA || LOONGSON2_APB_DMA || COMPILE_TEST + select REGMAP_MMIO + help + Enables support for NAND controller on Loongson family chips. + comment "Misc" config MTD_SM_COMMON @@ -480,9 +462,9 @@ config MTD_NAND_RICOH select MTD_SM_COMMON help Enable support for Ricoh R5C852 xD card reader - You also need to enable ether + You also need to enable either NAND SSFDC (SmartMedia) read only translation layer' or new - expermental, readwrite + experimental, readwrite 'SmartMedia/xD new translation layer' config MTD_NAND_DISKONCHIP |