diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 191 |
1 files changed, 125 insertions, 66 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9a49c4c2316b..ac12eaf11755 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -42,6 +42,7 @@ config BONDING tristate "Bonding driver support" depends on INET depends on IPV6 || IPV6=n + depends on TLS || TLS_DEVICE=n help Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet Channels together. This is called 'Etherchannel' by Cisco, @@ -77,22 +78,9 @@ config WIREGUARD depends on IPV6 || !IPV6 select NET_UDP_TUNNEL select DST_CACHE - select CRYPTO select CRYPTO_LIB_CURVE25519 select CRYPTO_LIB_CHACHA20POLY1305 - select CRYPTO_LIB_BLAKE2S - select CRYPTO_CHACHA20_X86_64 if X86 && 64BIT - select CRYPTO_POLY1305_X86_64 if X86 && 64BIT - select CRYPTO_BLAKE2S_X86 if X86 && 64BIT - select CRYPTO_CURVE25519_X86 if X86 && 64BIT - select ARM_CRYPTO if ARM - select ARM64_CRYPTO if ARM64 - select CRYPTO_CHACHA20_NEON if (ARM || ARM64) && KERNEL_MODE_NEON - select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON - select CRYPTO_POLY1305_ARM if ARM - select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON - select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2 - select CRYPTO_POLY1305_MIPS if CPU_MIPS32 || (CPU_MIPS64 && 64BIT) + select CRYPTO_LIB_UTILS help WireGuard is a secure, fast, and easy to use replacement for IPSec that uses modern cryptography and clever networking tricks. It's @@ -114,6 +102,21 @@ config WIREGUARD_DEBUG Say N here unless you know what you're doing. +config OVPN + tristate "OpenVPN data channel offload" + depends on NET && INET + depends on IPV6 || !IPV6 + select DST_CACHE + select NET_UDP_TUNNEL + select CRYPTO + select CRYPTO_AES + select CRYPTO_GCM + select CRYPTO_CHACHA20POLY1305 + select STREAM_PARSER + help + This module enhances the performance of the OpenVPN userspace software + by offloading the data channel processing to kernelspace. + config EQUALIZER tristate "EQL (serial line load balancing) support" help @@ -148,7 +151,7 @@ config NET_FC config IFB tristate "Intermediate Functional Block support" - depends on NET_CLS_ACT + depends on NET_ACT_MIRRED || NFT_FWD_NETDEV select NET_REDIRECT help This is an intermediate driver that allows sharing of @@ -260,17 +263,17 @@ config GENEVE will be called geneve. config BAREUDP - tristate "Bare UDP Encapsulation" - depends on INET - depends on IPV6 || !IPV6 - select NET_UDP_TUNNEL - select GRO_CELLS - help - This adds a bare UDP tunnel module for tunnelling different - kinds of traffic like MPLS, IP, etc. inside a UDP tunnel. - - To compile this driver as a module, choose M here: the module - will be called bareudp. + tristate "Bare UDP Encapsulation" + depends on INET + depends on IPV6 || !IPV6 + select NET_UDP_TUNNEL + select GRO_CELLS + help + This adds a bare UDP tunnel module for tunnelling different + kinds of traffic like MPLS, IP, etc. inside a UDP tunnel. + + To compile this driver as a module, choose M here: the module + will be called bareudp. config GTP tristate "GPRS Tunneling Protocol datapath (GTP-U)" @@ -287,7 +290,37 @@ config GTP 3GPP TS 29.060 standards. To compile this drivers as a module, choose M here: the module - wil be called gtp. + will be called gtp. + +config PFCP + tristate "Packet Forwarding Control Protocol (PFCP)" + depends on INET + select NET_UDP_TUNNEL + help + This allows one to create PFCP virtual interfaces that allows to + set up software and hardware offload of PFCP packets. + Note that this module does not support PFCP protocol in the kernel space. + There is no support for parsing any PFCP messages. + + To compile this drivers as a module, choose M here: the module + will be called pfcp. + +config AMT + tristate "Automatic Multicast Tunneling (AMT)" + depends on INET && IP_MULTICAST + depends on IPV6 || !IPV6 + select NET_UDP_TUNNEL + help + This allows one to create AMT(Automatic Multicast Tunneling) + virtual interfaces that provide multicast tunneling. + There are two roles, Gateway, and Relay. + Gateway Encapsulates IGMP/MLD traffic from listeners to the Relay. + Gateway Decapsulates multicast traffic from the Relay to Listeners. + Relay Encapsulates multicast traffic from Sources to Gateway. + Relay Decapsulates IGMP/MLD traffic from Gateway. + + To compile this drivers as a module, choose M here: the module + will be called amt. config MACSEC tristate "IEEE 802.1AE MAC-level encryption (MACsec)" @@ -314,9 +347,30 @@ config NETCONSOLE_DYNAMIC at runtime through a userspace interface exported using configfs. See <file:Documentation/networking/netconsole.rst> for details. +config NETCONSOLE_EXTENDED_LOG + bool "Set kernel extended message by default" + depends on NETCONSOLE + default n + help + Set extended log support for netconsole message. If this option is + set, log messages are transmitted with extended metadata header in a + format similar to /dev/kmsg. See + <file:Documentation/networking/netconsole.rst> for details. + +config NETCONSOLE_PREPEND_RELEASE + bool "Prepend kernel release version in the message by default" + depends on NETCONSOLE_EXTENDED_LOG + default n + help + Set kernel release to be prepended to each netconsole message by + default. If this option is set, the kernel release is prepended into + the first field of every netconsole message, so, the netconsole + server/peer can easily identify what kernel release is logging each + message. See <file:Documentation/networking/netconsole.rst> for + details. + config NETPOLL def_bool NETCONSOLE - select SRCU config NET_POLL_CONTROLLER def_bool NETPOLL @@ -385,6 +439,7 @@ config TUN_VNET_CROSS_LE config VETH tristate "Virtual ethernet pair device" + select PAGE_POOL help This device is a local ethernet tunnel. Devices are created in pairs. When one end receives the packet it appears on its pair and vice @@ -394,6 +449,7 @@ config VIRTIO_NET tristate "Virtio network driver" depends on VIRTIO select NET_FAILOVER + select DIMLIB help This is the virtual network driver for virtio. It can be used with QEMU based VMMs (like KVM or Xen). Say Y or M. @@ -408,6 +464,15 @@ config NLMON diagnostics, etc. This is mostly intended for developers or support to debug netlink issues. If unsure, say N. +config NETKIT + bool "BPF-programmable network device" + depends on BPF_SYSCALL + help + The netkit device is a virtual networking device where BPF programs + can be attached to the device(s) transmission routine in order to + implement the driver's internal logic. The device can be configured + to operate in L3 or L2 mode. If unsure, say N. + config NET_VRF tristate "Virtual Routing and Forwarding (Lite)" depends on IP_MULTIPLE_TABLES @@ -426,6 +491,14 @@ config VSOCKMON mostly intended for developers or support to debug vsock issues. If unsure, say N. +config MHI_NET + tristate "MHI network driver" + depends on MHI_BUS + help + This is the network driver for MHI bus. It can be used with + QCOM based WWAN modems for IP or QMAP/rmnet protocol (like SDX55). + Say Y or M. + endif # NET_CORE config SUNGEM_PHY @@ -447,31 +520,17 @@ source "drivers/net/hippi/Kconfig" source "drivers/net/ipa/Kconfig" -config NET_SB1000 - tristate "General Instruments Surfboard 1000" - depends on PNP - help - This is a driver for the General Instrument (also known as - NextLevel) SURFboard 1000 internal - cable modem. This is an ISA card which is used by a number of cable - TV companies to provide cable modem access. It's a one-way - downstream-only cable modem, meaning that your upstream net link is - provided by your regular phone modem. +source "drivers/net/phy/Kconfig" - At present this driver only compiles as a module, so say M here if - you have this card. The module will be called sb1000. Then read - <file:Documentation/networking/device_drivers/sb1000.rst> for - information on how to use this module, as it needs special ppp - scripts for establishing a connection. Further documentation - and the necessary scripts can be found at: +source "drivers/net/pse-pd/Kconfig" - <http://www.jacksonville.net/~fventuri/> - <http://home.adelphia.net/~siglercm/sb1000.html> - <http://linuxpower.cx/~cable/> +source "drivers/net/can/Kconfig" - If you don't have this card, of course say N. +source "drivers/net/mctp/Kconfig" -source "drivers/net/phy/Kconfig" +source "drivers/net/mdio/Kconfig" + +source "drivers/net/pcs/Kconfig" source "drivers/net/plip/Kconfig" @@ -485,16 +544,17 @@ source "drivers/net/usb/Kconfig" source "drivers/net/wireless/Kconfig" -source "drivers/net/wimax/Kconfig" - source "drivers/net/wan/Kconfig" source "drivers/net/ieee802154/Kconfig" +source "drivers/net/wwan/Kconfig" + config XEN_NETDEV_FRONTEND tristate "Xen network device frontend driver" depends on XEN select XEN_XENBUS_FRONTEND + select PAGE_POOL default y help This driver provides support for Xen paravirtual network @@ -533,9 +593,8 @@ config XEN_NETDEV_BACKEND config VMXNET3 tristate "VMware VMXNET3 ethernet driver" depends on PCI && INET - depends on !(PAGE_SIZE_64KB || ARM64_64K_PAGES || \ - IA64_PAGE_SIZE_64KB || MICROBLAZE_64K_PAGES || \ - PARISC_PAGE_SIZE_64KB || PPC_64K_PAGES) + depends on PAGE_SIZE_LESS_THAN_64KB + select PAGE_POOL help This driver supports VMware's vmxnet3 virtual ethernet NIC. To compile this driver as a module, choose M here: the @@ -548,18 +607,7 @@ config FUJITSU_ES This driver provides support for Extended Socket network device on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. -config USB4_NET - tristate "Networking over USB4 and Thunderbolt cables" - depends on USB4 && INET - help - Select this if you want to create network between two computers - over a USB4 and Thunderbolt cables. The driver supports Apple - ThunderboltIP protocol and allows communication with any host - supporting the same protocol including Windows and macOS. - - To compile this driver a module, choose M here. The module will be - called thunderbolt-net. - +source "drivers/net/thunderbolt/Kconfig" source "drivers/net/hyperv/Kconfig" config NETDEVSIM @@ -567,7 +615,11 @@ config NETDEVSIM depends on DEBUG_FS depends on INET depends on IPV6 || IPV6=n + depends on PSAMPLE || PSAMPLE=n + depends on PTP_1588_CLOCK_MOCK || PTP_1588_CLOCK_MOCK=n select NET_DEVLINK + select PAGE_POOL + select NET_SHAPER help This driver is a developer testing tool and software model that can be used to test various control path networking APIs, especially @@ -588,4 +640,11 @@ config NET_FAILOVER a VM with direct attached VF by failing over to the paravirtual datapath when the VF is unplugged. +config NETDEV_LEGACY_INIT + bool + depends on ISA + help + Drivers that call netdev_boot_setup_check() should select this + symbol, everything else no longer needs it. + endif # NETDEVICES |