summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/lan9303-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/lan9303-core.c')
-rw-r--r--drivers/net/dsa/lan9303-core.c104
1 files changed, 70 insertions, 34 deletions
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index cbe831875347..d246f95d57ec 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -6,8 +6,10 @@
#include <linux/module.h>
#include <linux/gpio/consumer.h>
#include <linux/regmap.h>
+#include <linux/iopoll.h>
#include <linux/mutex.h>
#include <linux/mii.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/if_bridge.h>
#include <linux/if_vlan.h>
@@ -838,6 +840,8 @@ static void lan9303_handle_reset(struct lan9303 *chip)
if (!chip->reset_gpio)
return;
+ gpiod_set_value_cansleep(chip->reset_gpio, 1);
+
if (chip->reset_duration != 0)
msleep(chip->reset_duration);
@@ -863,8 +867,34 @@ static int lan9303_disable_processing(struct lan9303 *chip)
static int lan9303_check_device(struct lan9303 *chip)
{
int ret;
+ int err;
u32 reg;
+ /* In I2C-managed configurations this polling loop will clash with
+ * switch's reading of EEPROM right after reset and this behaviour is
+ * not configurable. While lan9303_read() already has quite long retry
+ * timeout, seems not all cases are being detected as arbitration error.
+ *
+ * According to datasheet, EEPROM loader has 30ms timeout (in case of
+ * missing EEPROM).
+ *
+ * Loading of the largest supported EEPROM is expected to take at least
+ * 5.9s.
+ */
+ err = read_poll_timeout(lan9303_read, ret,
+ !ret && reg & LAN9303_HW_CFG_READY,
+ 20000, 6000000, false,
+ chip->regmap, LAN9303_HW_CFG, &reg);
+ if (ret) {
+ dev_err(chip->dev, "failed to read HW_CFG reg: %pe\n",
+ ERR_PTR(ret));
+ return ret;
+ }
+ if (err) {
+ dev_err(chip->dev, "HW_CFG not ready: 0x%08x\n", reg);
+ return err;
+ }
+
ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, &reg);
if (ret) {
dev_err(chip->dev, "failed to read chip revision register: %d\n",
@@ -1006,15 +1036,14 @@ static const struct lan9303_mib_desc lan9303_mib[] = {
static void lan9303_get_strings(struct dsa_switch *ds, int port,
u32 stringset, uint8_t *data)
{
+ u8 *buf = data;
unsigned int u;
if (stringset != ETH_SS_STATS)
return;
- for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) {
- strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name,
- ETH_GSTRING_LEN);
- }
+ for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++)
+ ethtool_puts(&buf, lan9303_mib[u].name);
}
static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
@@ -1047,31 +1076,31 @@ static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset)
return ARRAY_SIZE(lan9303_mib);
}
-static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
+static int lan9303_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct lan9303 *chip = ds->priv;
int phy_base = chip->phy_addr_base;
- if (phy == phy_base)
+ if (port == 0)
return lan9303_virt_phy_reg_read(chip, regnum);
- if (phy > phy_base + 2)
+ if (port > 2)
return -ENODEV;
- return chip->ops->phy_read(chip, phy, regnum);
+ return chip->ops->phy_read(chip, phy_base + port, regnum);
}
-static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
+static int lan9303_phy_write(struct dsa_switch *ds, int port, int regnum,
u16 val)
{
struct lan9303 *chip = ds->priv;
int phy_base = chip->phy_addr_base;
- if (phy == phy_base)
+ if (port == 0)
return lan9303_virt_phy_reg_write(chip, regnum, val);
- if (phy > phy_base + 2)
+ if (port > 2)
return -ENODEV;
- return chip->ops->phy_write(chip, phy, regnum, val);
+ return chip->ops->phy_write(chip, phy_base + port, regnum, val);
}
static int lan9303_port_enable(struct dsa_switch *ds, int port,
@@ -1083,7 +1112,7 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port,
if (!dsa_port_is_user(dp))
return 0;
- vlan_vid_add(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+ vlan_vid_add(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port);
return lan9303_enable_processing_port(chip, port);
}
@@ -1096,10 +1125,10 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port)
if (!dsa_port_is_user(dp))
return;
- vlan_vid_del(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+ vlan_vid_del(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port);
lan9303_disable_processing_port(chip, port);
- lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
+ lan9303_phy_write(ds, port, MII_BMCR, BMCR_PDOWN);
}
static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
@@ -1188,8 +1217,6 @@ static int lan9303_port_fdb_add(struct dsa_switch *ds, int port,
struct lan9303 *chip = ds->priv;
dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid);
- if (vid)
- return -EOPNOTSUPP;
return lan9303_alr_add_port(chip, addr, port, false);
}
@@ -1201,8 +1228,6 @@ static int lan9303_port_fdb_del(struct dsa_switch *ds, int port,
struct lan9303 *chip = ds->priv;
dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid);
- if (vid)
- return -EOPNOTSUPP;
lan9303_alr_del_port(chip, addr, port);
return 0;
@@ -1294,22 +1319,31 @@ static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port,
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
}
+}
- /* This driver does not make use of the speed, duplex, pause or the
- * advertisement in its mac_config, so it is safe to mark this driver
- * as non-legacy.
- */
- config->legacy_pre_march2020 = false;
+static void lan9303_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+
+static void lan9303_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
+{
}
-static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void lan9303_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause,
+ int speed, int duplex, bool tx_pause,
bool rx_pause)
{
- struct lan9303 *chip = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct lan9303 *chip = dp->ds->priv;
+ struct dsa_switch *ds = dp->ds;
+ int port = dp->index;
u32 ctl;
u32 reg;
@@ -1339,6 +1373,12 @@ static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
regmap_write(chip->regmap, flow_ctl_reg[port], reg);
}
+static const struct phylink_mac_ops lan9303_phylink_mac_ops = {
+ .mac_config = lan9303_phylink_mac_config,
+ .mac_link_down = lan9303_phylink_mac_link_down,
+ .mac_link_up = lan9303_phylink_mac_link_up,
+};
+
static const struct dsa_switch_ops lan9303_switch_ops = {
.get_tag_protocol = lan9303_get_tag_protocol,
.setup = lan9303_setup,
@@ -1346,7 +1386,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
.phy_read = lan9303_phy_read,
.phy_write = lan9303_phy_write,
.phylink_get_caps = lan9303_phylink_get_caps,
- .phylink_mac_link_up = lan9303_phylink_mac_link_up,
.get_ethtool_stats = lan9303_get_ethtool_stats,
.get_sset_count = lan9303_get_sset_count,
.port_enable = lan9303_port_enable,
@@ -1364,8 +1403,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
static int lan9303_register_switch(struct lan9303 *chip)
{
- int base;
-
chip->ds = devm_kzalloc(chip->dev, sizeof(*chip->ds), GFP_KERNEL);
if (!chip->ds)
return -ENOMEM;
@@ -1374,8 +1411,8 @@ static int lan9303_register_switch(struct lan9303 *chip)
chip->ds->num_ports = LAN9303_NUM_PORTS;
chip->ds->priv = chip;
chip->ds->ops = &lan9303_switch_ops;
- base = chip->phy_addr_base;
- chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base);
+ chip->ds->phylink_mac_ops = &lan9303_phylink_mac_ops;
+ chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1, 0);
return dsa_register_switch(chip->ds);
}
@@ -1462,7 +1499,6 @@ int lan9303_remove(struct lan9303 *chip)
/* assert reset to the whole device to prevent it from doing anything */
gpiod_set_value_cansleep(chip->reset_gpio, 1);
- gpiod_unexport(chip->reset_gpio);
return 0;
}
generated by cgit (git 2.34.1) at 2025-12-25 00:50:54 +0000