diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 660 |
1 files changed, 541 insertions, 119 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 6178a96e389f..5facffbb9c9a 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/kernel.h> @@ -21,25 +21,25 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), bits, set ? bits : 0); } static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) { - regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0); + regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0); } static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, u32 bits, bool set) { - regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset), + regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset), bits, set ? bits : 0); } @@ -52,7 +52,7 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, + return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, frame_size); } @@ -60,7 +60,7 @@ static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL, + return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL, val, !(val & VLAN_START), 10, 1000); } @@ -147,7 +147,7 @@ static int ksz9477_wait_alu_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4, + return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4, val, !(val & ALU_START), 10, 1000); } @@ -155,12 +155,196 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[2], + return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_STAT_CTRL__4, val, !(val & ALU_STAT_START), 10, 1000); } +static void port_sgmii_s(struct ksz_device *dev, uint port, u16 devid, u16 reg) +{ + u32 data; + + data = (devid & MII_MMD_CTRL_DEVAD_MASK) << 16; + data |= reg; + ksz_pwrite32(dev, port, REG_PORT_SGMII_ADDR__4, data); +} + +static void port_sgmii_r(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 *buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pread16(dev, port, REG_PORT_SGMII_DATA__4 + 2, buf); +} + +static void port_sgmii_w(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pwrite32(dev, port, REG_PORT_SGMII_DATA__4, buf); +} + +static int ksz9477_pcs_read(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + u16 val; + + port_sgmii_r(dev, port, mmd, reg, &val); + + /* Simulate a value to activate special code in the XPCS driver if + * supported. + */ + if (mmd == MDIO_MMD_PMAPMD) { + if (reg == MDIO_DEVID1) + val = 0x9477; + else if (reg == MDIO_DEVID2) + val = 0x22 << 10; + } else if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + /* Need to update MII_BMCR register with the exact speed and + * duplex mode when running in SGMII mode and this register is + * used to detect connected speed in that mode. + */ + if (reg == MMD_SR_MII_AUTO_NEG_STATUS) { + int duplex, speed; + + if (val & SR_MII_STAT_LINK_UP) { + speed = (val >> SR_MII_STAT_S) & SR_MII_STAT_M; + if (speed == SR_MII_STAT_1000_MBPS) + speed = SPEED_1000; + else if (speed == SR_MII_STAT_100_MBPS) + speed = SPEED_100; + else + speed = SPEED_10; + + if (val & SR_MII_STAT_FULL_DUPLEX) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + if (!p->phydev.link || + p->phydev.speed != speed || + p->phydev.duplex != duplex) { + u16 ctrl; + + p->phydev.link = 1; + p->phydev.speed = speed; + p->phydev.duplex = duplex; + port_sgmii_r(dev, port, mmd, MII_BMCR, + &ctrl); + ctrl &= BMCR_ANENABLE; + ctrl |= mii_bmcr_encode_fixed(speed, + duplex); + port_sgmii_w(dev, port, mmd, MII_BMCR, + ctrl); + } + } else { + p->phydev.link = 0; + } + } else if (reg == MII_BMSR) { + p->phydev.link = !!(val & BMSR_LSTATUS); + } + } + + return val; +} + +static int ksz9477_pcs_write(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + + if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + if (reg == MMD_SR_MII_AUTO_NEG_CTRL) { + u16 sgmii_mode = SR_MII_PCS_SGMII << SR_MII_PCS_MODE_S; + + /* Need these bits for 1000BASE-X mode to work with + * AN on. + */ + if (!(val & sgmii_mode)) + val |= SR_MII_SGMII_LINK_UP | + SR_MII_TX_CFG_PHY_MASTER; + + /* SGMII interrupt in the port cannot be masked, so + * make sure interrupt is not enabled as it is not + * handled. + */ + val &= ~SR_MII_AUTO_NEG_COMPLETE_INTR; + } else if (reg == MII_BMCR) { + /* The MII_ADVERTISE register needs to write once + * before doing auto-negotiation for the correct + * config_word to be sent out after reset. + */ + if ((val & BMCR_ANENABLE) && !p->sgmii_adv_write) { + u16 adv; + + /* The SGMII port cannot disable flow control + * so it is better to just advertise symmetric + * pause. + */ + port_sgmii_r(dev, port, mmd, MII_ADVERTISE, + &adv); + adv |= ADVERTISE_1000XPAUSE; + adv &= ~ADVERTISE_1000XPSE_ASYM; + port_sgmii_w(dev, port, mmd, MII_ADVERTISE, + adv); + p->sgmii_adv_write = 1; + } else if (val & BMCR_RESET) { + p->sgmii_adv_write = 0; + } + } else if (reg == MII_ADVERTISE) { + /* XPCS driver writes to this register so there is no + * need to update it for the errata. + */ + p->sgmii_adv_write = 1; + } + } + port_sgmii_w(dev, port, mmd, reg, val); + + return 0; +} + +int ksz9477_pcs_create(struct ksz_device *dev) +{ + /* This chip has a SGMII port. */ + if (ksz_has_sgmii_port(dev)) { + int port = ksz_get_sgmii_port(dev); + struct ksz_port *p = &dev->ports[port]; + struct phylink_pcs *pcs; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc(dev->dev); + if (!bus) + return -ENOMEM; + + bus->name = "ksz_pcs_mdio_bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(dev->dev)); + bus->read_c45 = &ksz9477_pcs_read; + bus->write_c45 = &ksz9477_pcs_write; + bus->parent = dev->dev; + bus->phy_mask = ~0; + bus->priv = dev; + + ret = devm_mdiobus_register(dev->dev, bus); + if (ret) + return ret; + + pcs = xpcs_create_pcs_mdiodev(bus, 0); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + p->pcs = pcs; + } + + return 0; +} + int ksz9477_reset_switch(struct ksz_device *dev) { u8 data8; @@ -170,14 +354,12 @@ int ksz9477_reset_switch(struct ksz_device *dev) ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); /* turn off SPI DO Edge select */ - regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0, SPI_AUTO_EDGE_DETECTION, 0); /* default configuration */ - ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); - data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | - SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + ksz_write8(dev, REG_SW_LUE_CTRL_1, + SW_AGING_ENABLE | SW_LINK_AUTO_AGING | SW_SRC_ADDR_FILTER); /* disable interrupts */ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); @@ -213,7 +395,7 @@ void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) data |= (addr << MIB_COUNTER_INDEX_S); ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); - ret = regmap_read_poll_timeout(dev->regmap[2], + ret = regmap_read_poll_timeout(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4), val, !(val & MIB_COUNTER_READ), 10, 1000); /* failed to read MIB. get out of loop */ @@ -248,6 +430,73 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) mutex_unlock(&p->mib.cnt_mutex); } +static int ksz9477_half_duplex_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u8 lue_ctrl; + u32 pmavbc; + u16 pqm; + int ret; + + /* Errata DS80000754 recommends monitoring potential faults in + * half-duplex mode. The switch might not be able to communicate anymore + * in these states. If you see this message, please read the + * errata-sheet for more information: + * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf + * To workaround this issue, half-duplex mode should be avoided. + * A software reset could be implemented to recover from this state. + */ + dev_warn_once(dev->dev, + "Half-duplex detected on port %d, transmission halt may occur\n", + port); + if (tx_late_col != 0) { + /* Transmission halt with late collisions */ + dev_crit_once(dev->dev, + "TX late collisions detected, transmission may be halted on port %d\n", + port); + } + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &lue_ctrl); + if (ret) + return ret; + if (lue_ctrl & SW_VLAN_ENABLE) { + ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm); + if (ret) + return ret; + + ret = ksz_read32(dev, REG_PMAVBC, &pmavbc); + if (ret) + return ret; + + if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) || + (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) { + /* Transmission halt with Half-Duplex and VLAN */ + dev_crit_once(dev->dev, + "resources out of limits, transmission may be halted\n"); + } + } + + return ret; +} + +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u8 status; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status); + if (ret) + return ret; + + if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) + == PORT_INTF_SPEED_NONE) && + !(status & PORT_INTF_FULL_DUPLEX)) { + ret = ksz9477_half_duplex_monitor(dev, port, tx_late_col); + } + + return ret; +} + void ksz9477_port_init_cnt(struct ksz_device *dev, int port) { struct ksz_port_mib *mib = &dev->ports[port].mib; @@ -329,11 +578,27 @@ int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) { + u32 mask, val32; + /* No real PHY after this. */ if (!dev->info->internal_phy[addr]) return 0; - return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + if (reg < 0x10) + return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + + /* Errata: When using SPI, I2C, or in-band register access, + * writes to certain PHY registers should be performed as + * 32-bit writes instead of 16-bit writes. + */ + val32 = val; + mask = 0xffff; + if ((reg & 1) == 0) { + val32 <<= 16; + mask <<= 16; + } + reg &= ~1; + return ksz_prmw32(dev, addr, 0x100 + (reg << 1), mask, val32); } void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) @@ -346,7 +611,7 @@ void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) const u16 *regs = dev->info->regs; u8 data; - regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2, SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); @@ -889,62 +1154,6 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) return interface; } -static void ksz9477_port_mmd_write(struct ksz_device *dev, int port, - u8 dev_addr, u16 reg_addr, u16 val) -{ - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, - MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr)); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, - MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr)); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); -} - -static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) -{ - /* Apply PHY settings to address errata listed in - * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565 - * Silicon Errata and Data Sheet Clarification documents: - * - * Register settings are needed to improve PHY receive performance - */ - ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b); - ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032); - ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c); - ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060); - ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001); - - /* Transmit waveform amplitude can be improved - * (1000BASE-T, 100BASE-TX, 10BASE-Te) - */ - ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0); - - /* Energy Efficient Ethernet (EEE) feature select must - * be manually disabled (except on KSZ8565 which is 100Mbit) - */ - if (dev->info->gbit_capable[port]) - ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); - - /* Register settings are required to meet data sheet - * supply current specifications - */ - ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee); -} - void ksz9477_get_caps(struct ksz_device *dev, int port, struct phylink_config *config) { @@ -953,35 +1162,85 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; + + if (ksz_is_sgmii_port(dev, port)) { + struct ksz_port *p = &dev->ports[port]; + + phy_interface_or(config->supported_interfaces, + config->supported_interfaces, + p->pcs->supported_interfaces); + } } int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { u32 secs = msecs / 1000; - u8 value; - u8 data; + u8 data, mult, value; + u32 max_val; int ret; - value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); +#define MAX_TIMER_VAL ((1 << 8) - 1) - ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); - if (ret < 0) - return ret; + /* The aging timer comprises a 3-bit multiplier and an 8-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 255 = 1785 seconds. + */ + if (!secs) + secs = 1; - data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); if (ret < 0) return ret; - value &= ~SW_AGE_CNT_M; - value |= FIELD_PREP(SW_AGE_CNT_M, data); + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } - return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + if (ret < 0) + return ret; + } + + value = DIV_ROUND_UP(secs, data); + return ksz_write8(dev, REG_SW_LUE_CTRL_3, value); +} + +void ksz9477_port_queue_split(struct ksz_device *dev, int port) +{ + u8 data; + + if (dev->info->num_tx_queues == 8) + data = PORT_EIGHT_QUEUE; + else if (dev->info->num_tx_queues == 4) + data = PORT_FOUR_QUEUE; + else if (dev->info->num_tx_queues == 2) + data = PORT_TWO_QUEUE; + else + data = PORT_SINGLE_QUEUE; + + ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data); } void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { + const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; u16 data16; u8 member; @@ -991,6 +1250,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, true); + ksz9477_port_queue_split(dev, port); + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); /* set back pressure */ @@ -999,32 +1260,16 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* enable broadcast storm limit */ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - /* disable DiffServ priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); - /* replace priority */ ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, false); ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, MTI_PVID_REPLACE, false); - /* enable 802.1p priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); - - if (dev->info->internal_phy[port]) { - /* do not force flow control */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, - PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, - false); - - if (dev->info->phy_errata_9477) - ksz9477_phy_errata_setup(dev, port); - } else { - /* force flow control */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, - PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, - true); - } + /* force flow control for non-PHY ports only */ + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + !dev->info->internal_phy[port]); if (cpu_port) member = dsa_user_ports(ds); @@ -1036,6 +1281,16 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* clear pending interrupts */ if (dev->info->internal_phy[port]) ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); + + ksz9477_port_acl_init(dev, port); + + /* clear pending wake flags */ + ksz_handle_wake_reason(dev, port); + + /* Disable all WoL options by default. Otherwise + * ksz_switch_macaddr_get/put logic will not work properly. + */ + ksz_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], 0); } void ksz9477_config_cpu_port(struct dsa_switch *ds) @@ -1093,12 +1348,22 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) if (i == dev->cpu_port) continue; ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); + + /* Power down the internal PHY if port is unused. */ + if (dsa_is_unused_port(ds, i) && dev->info->internal_phy[i]) + ksz_pwrite16(dev, i, 0x100, BMCR_PDOWN); } } +#define RESV_MCAST_CNT 8 + +static u8 reserved_mcast_map[RESV_MCAST_CNT] = { 0, 1, 3, 16, 32, 33, 2, 17 }; + int ksz9477_enable_stp_addr(struct ksz_device *dev) { + u8 i, ports, update; const u32 *masks; + bool override; u32 data; int ret; @@ -1107,23 +1372,87 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) /* Enable Reserved multicast table */ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); - /* Set the Override bit for forwarding BPDU packet to CPU */ - ret = ksz_write32(dev, REG_SW_ALU_VAL_B, - ALU_V_OVERRIDE | BIT(dev->cpu_port)); - if (ret < 0) - return ret; + /* The reserved multicast address table has 8 entries. Each entry has + * a default value of which port to forward. It is assumed the host + * port is the last port in most of the switches, but that is not the + * case for KSZ9477 or maybe KSZ9897. For LAN937X family the default + * port is port 5, the first RGMII port. It is okay for LAN9370, a + * 5-port switch, but may not be correct for the other 8-port + * versions. It is necessary to update the whole table to forward to + * the right ports. + * Furthermore PTP messages can use a reserved multicast address and + * the host will not receive them if this table is not correct. + */ + for (i = 0; i < RESV_MCAST_CNT; i++) { + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_READ]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; - data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; - ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - if (ret < 0) - return ret; + ret = ksz_read32(dev, REG_SW_ALU_VAL_B, &data); + if (ret < 0) + return ret; - /* wait to be finished */ - ret = ksz9477_wait_alu_sta_ready(dev); - if (ret < 0) { - dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); - return ret; + override = false; + ports = data & dev->port_mask; + switch (i) { + case 0: + case 6: + /* Change the host port. */ + update = BIT(dev->cpu_port); + override = true; + break; + case 2: + /* Change the host port. */ + update = BIT(dev->cpu_port); + break; + case 4: + case 5: + case 7: + /* Skip the host port. */ + update = dev->port_mask & ~BIT(dev->cpu_port); + break; + default: + update = ports; + break; + } + if (update != ports || override) { + data &= ~dev->port_mask; + data |= update; + /* Set Override bit to receive frame even when port is + * closed. + */ + if (override) + data |= ALU_V_OVERRIDE; + ret = ksz_write32(dev, REG_SW_ALU_VAL_B, data); + if (ret < 0) + return ret; + + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_WRITE]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; + } } return 0; @@ -1132,6 +1461,7 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) int ksz9477_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; int ret = 0; ds->mtu_enforcement_ingress = true; @@ -1146,8 +1476,12 @@ int ksz9477_setup(struct dsa_switch *ds) /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); + /* Use collision based back pressure mode. */ + ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_BACK_PRESSURE, + SW_BACK_PRESSURE_COLLISION); + /* Now we can configure default MTU value */ - ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK, + ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); if (ret) return ret; @@ -1158,7 +1492,11 @@ int ksz9477_setup(struct dsa_switch *ds) /* enable global MIB counter freeze function */ ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); - return 0; + /* Make sure PME (WoL) is not enabled. If requested, it will + * be enabled by ksz_wol_pre_shutdown(). Otherwise, some PMICs + * do not like PME events changes before shutdown. + */ + return ksz_write8(dev, regs[REG_SW_PME_CTRL], 0); } u32 ksz9477_get_port_addr(int port, int offset) @@ -1166,6 +1504,90 @@ u32 ksz9477_get_port_addr(int port, int offset) return PORT_CTRL_ADDR(port, offset); } +int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) +{ + val = val >> 8; + + return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); +} + +/* The KSZ9477 provides following HW features to accelerate + * HSR frames handling: + * + * 1. TX PACKET DUPLICATION FROM HOST TO SWITCH + * 2. RX PACKET DUPLICATION DISCARDING + * 3. PREVENTING PACKET LOOP IN THE RING BY SELF-ADDRESS FILTERING + * + * Only one from point 1. has the NETIF_F* flag available. + * + * Ones from point 2 and 3 are "best effort" - i.e. those will + * work correctly most of the time, but it may happen that some + * frames will not be caught - to be more specific; there is a race + * condition in hardware such that, when duplicate packets are received + * on member ports very close in time to each other, the hardware fails + * to detect that they are duplicates. + * + * Hence, the SW needs to handle those special cases. However, the speed + * up gain is considerable when above features are used. + * + * Moreover, the NETIF_F_HW_HSR_FWD feature is also enabled, as HSR frames + * can be forwarded in the switch fabric between HSR ports. + */ +#define KSZ9477_SUPPORTED_HSR_FEATURES (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_FWD) + +void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + struct net_device *user; + struct dsa_port *hsr_dp; + u8 data, hsr_ports = 0; + + /* Program which port(s) shall support HSR */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port)); + + /* Forward frames between HSR ports (i.e. bridge together HSR ports) */ + if (dev->hsr_ports) { + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + hsr_ports |= BIT(hsr_dp->index); + + hsr_ports |= BIT(dsa_upstream_port(ds, port)); + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + ksz9477_cfg_port_member(dev, hsr_dp->index, hsr_ports); + } + + if (!dev->hsr_ports) { + /* Enable discarding of received HSR frames */ + ksz_read8(dev, REG_HSR_ALU_CTRL_0__1, &data); + data |= HSR_DUPLICATE_DISCARD; + data &= ~HSR_NODE_UNICAST; + ksz_write8(dev, REG_HSR_ALU_CTRL_0__1, data); + } + + /* Enable per port self-address filtering. + * The global self-address filtering has already been enabled in the + * ksz9477_reset_switch() function. + */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, true); + + /* Setup HW supported features for lan HSR ports */ + user = dsa_to_port(ds, port)->user; + user->features |= KSZ9477_SUPPORTED_HSR_FEATURES; +} + +void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + + /* Clear port HSR support */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), 0); + + /* Disable forwarding frames between HSR ports */ + ksz9477_cfg_port_member(dev, port, BIT(dsa_upstream_port(ds, port))); + + /* Disable per port self-address filtering */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, false); +} + int ksz9477_switch_init(struct ksz_device *dev) { u8 data8; |