diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 5571 |
1 files changed, 5571 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c new file mode 100644 index 000000000000..0c10351fe5eb --- /dev/null +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -0,0 +1,5571 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip switch driver main logic + * + * Copyright (C) 2017-2025 Microchip Technology Inc. + */ + +#include <linux/delay.h> +#include <linux/dsa/ksz_common.h> +#include <linux/export.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/if_hsr.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> +#include <linux/micrel_phy.h> +#include <linux/pinctrl/consumer.h> +#include <net/dsa.h> +#include <net/ieee8021q.h> +#include <net/pkt_cls.h> +#include <net/switchdev.h> + +#include "ksz_common.h" +#include "ksz_dcb.h" +#include "ksz_ptp.h" +#include "ksz8.h" +#include "ksz9477.h" +#include "lan937x.h" + +#define MIB_COUNTER_NUM 0x20 + +struct ksz_stats_raw { + u64 rx_hi; + u64 rx_undersize; + u64 rx_fragments; + u64 rx_oversize; + u64 rx_jabbers; + u64 rx_symbol_err; + u64 rx_crc_err; + u64 rx_align_err; + u64 rx_mac_ctrl; + u64 rx_pause; + u64 rx_bcast; + u64 rx_mcast; + u64 rx_ucast; + u64 rx_64_or_less; + u64 rx_65_127; + u64 rx_128_255; + u64 rx_256_511; + u64 rx_512_1023; + u64 rx_1024_1522; + u64 rx_1523_2000; + u64 rx_2001; + u64 tx_hi; + u64 tx_late_col; + u64 tx_pause; + u64 tx_bcast; + u64 tx_mcast; + u64 tx_ucast; + u64 tx_deferred; + u64 tx_total_col; + u64 tx_exc_col; + u64 tx_single_col; + u64 tx_mult_col; + u64 rx_total; + u64 tx_total; + u64 rx_discards; + u64 tx_discards; +}; + +struct ksz88xx_stats_raw { + u64 rx; + u64 rx_hi; + u64 rx_undersize; + u64 rx_fragments; + u64 rx_oversize; + u64 rx_jabbers; + u64 rx_symbol_err; + u64 rx_crc_err; + u64 rx_align_err; + u64 rx_mac_ctrl; + u64 rx_pause; + u64 rx_bcast; + u64 rx_mcast; + u64 rx_ucast; + u64 rx_64_or_less; + u64 rx_65_127; + u64 rx_128_255; + u64 rx_256_511; + u64 rx_512_1023; + u64 rx_1024_1522; + u64 tx; + u64 tx_hi; + u64 tx_late_col; + u64 tx_pause; + u64 tx_bcast; + u64 tx_mcast; + u64 tx_ucast; + u64 tx_deferred; + u64 tx_total_col; + u64 tx_exc_col; + u64 tx_single_col; + u64 tx_mult_col; + u64 rx_discards; + u64 tx_discards; +}; + +static const struct ksz_mib_names ksz88xx_mib_names[] = { + { 0x00, "rx" }, + { 0x01, "rx_hi" }, + { 0x02, "rx_undersize" }, + { 0x03, "rx_fragments" }, + { 0x04, "rx_oversize" }, + { 0x05, "rx_jabbers" }, + { 0x06, "rx_symbol_err" }, + { 0x07, "rx_crc_err" }, + { 0x08, "rx_align_err" }, + { 0x09, "rx_mac_ctrl" }, + { 0x0a, "rx_pause" }, + { 0x0b, "rx_bcast" }, + { 0x0c, "rx_mcast" }, + { 0x0d, "rx_ucast" }, + { 0x0e, "rx_64_or_less" }, + { 0x0f, "rx_65_127" }, + { 0x10, "rx_128_255" }, + { 0x11, "rx_256_511" }, + { 0x12, "rx_512_1023" }, + { 0x13, "rx_1024_1522" }, + { 0x14, "tx" }, + { 0x15, "tx_hi" }, + { 0x16, "tx_late_col" }, + { 0x17, "tx_pause" }, + { 0x18, "tx_bcast" }, + { 0x19, "tx_mcast" }, + { 0x1a, "tx_ucast" }, + { 0x1b, "tx_deferred" }, + { 0x1c, "tx_total_col" }, + { 0x1d, "tx_exc_col" }, + { 0x1e, "tx_single_col" }, + { 0x1f, "tx_mult_col" }, + { 0x100, "rx_discards" }, + { 0x101, "tx_discards" }, +}; + +static const struct ksz_mib_names ksz9477_mib_names[] = { + { 0x00, "rx_hi" }, + { 0x01, "rx_undersize" }, + { 0x02, "rx_fragments" }, + { 0x03, "rx_oversize" }, + { 0x04, "rx_jabbers" }, + { 0x05, "rx_symbol_err" }, + { 0x06, "rx_crc_err" }, + { 0x07, "rx_align_err" }, + { 0x08, "rx_mac_ctrl" }, + { 0x09, "rx_pause" }, + { 0x0A, "rx_bcast" }, + { 0x0B, "rx_mcast" }, + { 0x0C, "rx_ucast" }, + { 0x0D, "rx_64_or_less" }, + { 0x0E, "rx_65_127" }, + { 0x0F, "rx_128_255" }, + { 0x10, "rx_256_511" }, + { 0x11, "rx_512_1023" }, + { 0x12, "rx_1024_1522" }, + { 0x13, "rx_1523_2000" }, + { 0x14, "rx_2001" }, + { 0x15, "tx_hi" }, + { 0x16, "tx_late_col" }, + { 0x17, "tx_pause" }, + { 0x18, "tx_bcast" }, + { 0x19, "tx_mcast" }, + { 0x1A, "tx_ucast" }, + { 0x1B, "tx_deferred" }, + { 0x1C, "tx_total_col" }, + { 0x1D, "tx_exc_col" }, + { 0x1E, "tx_single_col" }, + { 0x1F, "tx_mult_col" }, + { 0x80, "rx_total" }, + { 0x81, "tx_total" }, + { 0x82, "rx_discards" }, + { 0x83, "tx_discards" }, +}; + +struct ksz_driver_strength_prop { + const char *name; + int offset; + int value; +}; + +enum ksz_driver_strength_type { + KSZ_DRIVER_STRENGTH_HI, + KSZ_DRIVER_STRENGTH_LO, + KSZ_DRIVER_STRENGTH_IO, +}; + +/** + * struct ksz_drive_strength - drive strength mapping + * @reg_val: register value + * @microamp: microamp value + */ +struct ksz_drive_strength { + u32 reg_val; + u32 microamp; +}; + +/* ksz9477_drive_strengths - Drive strength mapping for KSZ9477 variants + * + * This values are not documented in KSZ9477 variants but confirmed by + * Microchip that KSZ9477, KSZ9567, KSZ8567, KSZ9897, KSZ9896, KSZ9563, KSZ9893 + * and KSZ8563 are using same register (drive strength) settings like KSZ8795. + * + * Documentation in KSZ8795CLX provides more information with some + * recommendations: + * - for high speed signals + * 1. 4 mA or 8 mA is often used for MII, RMII, and SPI interface with using + * 2.5V or 3.3V VDDIO. + * 2. 12 mA or 16 mA is often used for MII, RMII, and SPI interface with + * using 1.8V VDDIO. + * 3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V + * or 3.3V VDDIO. + * 4. 28 mA is often used for GMII/RGMII interface with using 1.8V VDDIO. + * 5. In same interface, the heavy loading should use higher one of the + * drive current strength. + * - for low speed signals + * 1. 3.3V VDDIO, use either 4 mA or 8 mA. + * 2. 2.5V VDDIO, use either 8 mA or 12 mA. + * 3. 1.8V VDDIO, use either 12 mA or 16 mA. + * 4. If it is heavy loading, can use higher drive current strength. + */ +static const struct ksz_drive_strength ksz9477_drive_strengths[] = { + { SW_DRIVE_STRENGTH_2MA, 2000 }, + { SW_DRIVE_STRENGTH_4MA, 4000 }, + { SW_DRIVE_STRENGTH_8MA, 8000 }, + { SW_DRIVE_STRENGTH_12MA, 12000 }, + { SW_DRIVE_STRENGTH_16MA, 16000 }, + { SW_DRIVE_STRENGTH_20MA, 20000 }, + { SW_DRIVE_STRENGTH_24MA, 24000 }, + { SW_DRIVE_STRENGTH_28MA, 28000 }, +}; + +/* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, .. + * variants. + * This values are documented in KSZ8873 and KSZ8863 datasheets. + */ +static const struct ksz_drive_strength ksz88x3_drive_strengths[] = { + { 0, 8000 }, + { KSZ8873_DRIVE_STRENGTH_16MA, 16000 }, +}; + +static void ksz88x3_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface); + +/** + * ksz_phylink_mac_disable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * + * This function is a dummy handler. See ksz_phylink_mac_enable_tx_lpi() for + * a detailed explanation of EEE/LPI handling in KSZ switches. + */ +static void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ +} + +/** + * ksz_phylink_mac_enable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * @timer: timer value before entering LPI (unused) + * @tx_clock_stop: whether to stop the TX clock in LPI mode (unused) + * + * This function signals to phylink that the driver architecture supports + * LPI management, enabling phylink to control EEE advertisement during + * negotiation according to IEEE Std 802.3 (Clause 78). + * + * Hardware Management of EEE/LPI State: + * For KSZ switch ports with integrated PHYs (e.g., KSZ9893R ports 1-2), + * observation and testing suggest that the actual EEE / Low Power Idle (LPI) + * state transitions are managed autonomously by the hardware based on + * the auto-negotiation results. (Note: While the datasheet describes EEE + * operation based on negotiation, it doesn't explicitly detail the internal + * MAC/PHY interaction, so autonomous hardware management of the MAC state + * for LPI is inferred from observed behavior). + * This hardware control, consistent with the switch's ability to operate + * autonomously via strapping, means MAC-level software intervention is not + * required or exposed for managing the LPI state once EEE is negotiated. + * (Ref: KSZ9893R Data Sheet DS00002420D, primarily Section 4.7.5 explaining + * EEE, also Sections 4.1.7 on Auto-Negotiation and 3.2.1 on Configuration + * Straps). + * + * Additionally, ports configured as MAC interfaces (e.g., KSZ9893R port 3) + * lack documented MAC-level LPI control. + * + * Therefore, this callback performs no action and serves primarily to inform + * phylink of LPI awareness and to document the inferred hardware behavior. + * + * Returns: 0 (Always success) + */ +static int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + return 0; +} + +static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { + .mac_config = ksz88x3_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct phylink_mac_ops ksz8_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct ksz_dev_ops ksz8463_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8463_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8463_r_phy, + .w_phy = ksz8463_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz88xx_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, +}; + +static const struct ksz_dev_ops ksz88xx_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8_r_phy, + .w_phy = ksz8_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz88xx_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, +}; + +static const struct ksz_dev_ops ksz87xx_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8_r_phy, + .w_phy = ksz8_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, +}; + +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, bool tx_pause, + bool rx_pause); + +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + +static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, +}; + +static const struct ksz_dev_ops ksz9477_dev_ops = { + .setup = ksz9477_setup, + .get_port_addr = ksz9477_get_port_addr, + .cfg_port_member = ksz9477_cfg_port_member, + .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, + .port_setup = ksz9477_port_setup, + .set_ageing_time = ksz9477_set_ageing_time, + .r_phy = ksz9477_r_phy, + .w_phy = ksz9477_w_phy, + .r_mib_cnt = ksz9477_r_mib_cnt, + .r_mib_pkt = ksz9477_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz9477_freeze_mib, + .port_init_cnt = ksz9477_port_init_cnt, + .vlan_filtering = ksz9477_port_vlan_filtering, + .vlan_add = ksz9477_port_vlan_add, + .vlan_del = ksz9477_port_vlan_del, + .mirror_add = ksz9477_port_mirror_add, + .mirror_del = ksz9477_port_mirror_del, + .get_caps = ksz9477_get_caps, + .fdb_dump = ksz9477_fdb_dump, + .fdb_add = ksz9477_fdb_add, + .fdb_del = ksz9477_fdb_del, + .mdb_add = ksz9477_mdb_add, + .mdb_del = ksz9477_mdb_del, + .change_mtu = ksz9477_change_mtu, + .pme_write8 = ksz_write8, + .pme_pread8 = ksz_pread8, + .pme_pwrite8 = ksz_pwrite8, + .config_cpu_port = ksz9477_config_cpu_port, + .tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc, + .enable_stp_addr = ksz9477_enable_stp_addr, + .reset = ksz9477_reset_switch, + .init = ksz9477_switch_init, + .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, +}; + +static const struct phylink_mac_ops lan937x_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct ksz_dev_ops lan937x_dev_ops = { + .setup = lan937x_setup, + .teardown = lan937x_teardown, + .get_port_addr = ksz9477_get_port_addr, + .cfg_port_member = ksz9477_cfg_port_member, + .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, + .port_setup = lan937x_port_setup, + .set_ageing_time = lan937x_set_ageing_time, + .mdio_bus_preinit = lan937x_mdio_bus_preinit, + .create_phy_addr_map = lan937x_create_phy_addr_map, + .r_phy = lan937x_r_phy, + .w_phy = lan937x_w_phy, + .r_mib_cnt = ksz9477_r_mib_cnt, + .r_mib_pkt = ksz9477_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz9477_freeze_mib, + .port_init_cnt = ksz9477_port_init_cnt, + .vlan_filtering = ksz9477_port_vlan_filtering, + .vlan_add = ksz9477_port_vlan_add, + .vlan_del = ksz9477_port_vlan_del, + .mirror_add = ksz9477_port_mirror_add, + .mirror_del = ksz9477_port_mirror_del, + .get_caps = lan937x_phylink_get_caps, + .setup_rgmii_delay = lan937x_setup_rgmii_delay, + .fdb_dump = ksz9477_fdb_dump, + .fdb_add = ksz9477_fdb_add, + .fdb_del = ksz9477_fdb_del, + .mdb_add = ksz9477_mdb_add, + .mdb_del = ksz9477_mdb_del, + .change_mtu = lan937x_change_mtu, + .config_cpu_port = lan937x_config_cpu_port, + .tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc, + .enable_stp_addr = ksz9477_enable_stp_addr, + .reset = lan937x_reset_switch, + .init = lan937x_switch_init, + .exit = lan937x_switch_exit, +}; + +static const u16 ksz8463_regs[] = { + [REG_SW_MAC_ADDR] = 0x10, + [REG_IND_CTRL_0] = 0x30, + [REG_IND_DATA_8] = 0x26, + [REG_IND_DATA_CHECK] = 0x26, + [REG_IND_DATA_HI] = 0x28, + [REG_IND_DATA_LO] = 0x2C, + [REG_IND_MIB_CHECK] = 0x2F, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x0F, + [S_TAIL_TAG_CTRL] = 0xAD, + [P_STP_CTRL] = 0x6F, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8463_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(3), + [SW_TAIL_TAG_ENABLE] = BIT(0), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(15, 12), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16), + [VLAN_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_USE_FID] = BIT(21), + [STATIC_MAC_TABLE_FID] = GENMASK(25, 22), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(20), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22), +}; + +static u8 ksz8463_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 22, + [DYNAMIC_MAC_ENTRIES_H] = 8, + [DYNAMIC_MAC_ENTRIES] = 24, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 22, + [DYNAMIC_MAC_SRC_PORT] = 20, +}; + +static const u16 ksz8795_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, + [REG_IND_CTRL_0] = 0x6E, + [REG_IND_DATA_8] = 0x70, + [REG_IND_DATA_CHECK] = 0x72, + [REG_IND_DATA_HI] = 0x71, + [REG_IND_DATA_LO] = 0x75, + [REG_IND_MIB_CHECK] = 0x74, + [REG_IND_BYTE] = 0xA0, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x07, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x08, + [P_SPEED_STATUS] = 0x09, + [S_TAIL_TAG_CTRL] = 0x0C, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, + [P_XMII_CTRL_0] = 0x06, + [P_XMII_CTRL_1] = 0x06, + [REG_SW_PME_CTRL] = 0x8003, + [REG_PORT_PME_STATUS] = 0x8003, + [REG_PORT_PME_CTRL] = 0x8007, +}; + +static const u32 ksz8795_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(7), + [SW_TAIL_TAG_ENABLE] = BIT(1), + [MIB_COUNTER_OVERFLOW] = BIT(6), + [MIB_COUNTER_VALID] = BIT(5), + [VLAN_TABLE_FID] = GENMASK(6, 0), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7), + [VLAN_TABLE_VALID] = BIT(12), + [STATIC_MAC_TABLE_VALID] = BIT(21), + [STATIC_MAC_TABLE_USE_FID] = BIT(23), + [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), + [P_MII_TX_FLOW_CTRL] = BIT(5), + [P_MII_RX_FLOW_CTRL] = BIT(5), +}; + +static const u8 ksz8795_xmii_ctrl0[] = { + [P_MII_100MBIT] = 0, + [P_MII_10MBIT] = 1, + [P_MII_FULL_DUPLEX] = 0, + [P_MII_HALF_DUPLEX] = 1, +}; + +static const u8 ksz8795_xmii_ctrl1[] = { + [P_RGMII_SEL] = 3, + [P_GMII_SEL] = 2, + [P_RMII_SEL] = 1, + [P_MII_SEL] = 0, + [P_GMII_1GBIT] = 1, + [P_GMII_NOT_1GBIT] = 0, +}; + +static const u8 ksz8795_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 7, + [VLAN_TABLE] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 24, + [DYNAMIC_MAC_ENTRIES_H] = 3, + [DYNAMIC_MAC_ENTRIES] = 29, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 27, + [DYNAMIC_MAC_SRC_PORT] = 24, +}; + +static const u16 ksz8863_regs[] = { + [REG_SW_MAC_ADDR] = 0x70, + [REG_IND_CTRL_0] = 0x79, + [REG_IND_DATA_8] = 0x7B, + [REG_IND_DATA_CHECK] = 0x7B, + [REG_IND_DATA_HI] = 0x7C, + [REG_IND_DATA_LO] = 0x80, + [REG_IND_MIB_CHECK] = 0x80, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x0F, + [S_TAIL_TAG_CTRL] = 0x03, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8863_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(3), + [SW_TAIL_TAG_ENABLE] = BIT(6), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(15, 12), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16), + [VLAN_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_USE_FID] = BIT(21), + [STATIC_MAC_TABLE_FID] = GENMASK(25, 22), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(20), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22), +}; + +static u8 ksz8863_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 22, + [DYNAMIC_MAC_ENTRIES_H] = 8, + [DYNAMIC_MAC_ENTRIES] = 24, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 22, + [DYNAMIC_MAC_SRC_PORT] = 20, +}; + +static const u16 ksz8895_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, + [REG_IND_CTRL_0] = 0x6E, + [REG_IND_DATA_8] = 0x70, + [REG_IND_DATA_CHECK] = 0x72, + [REG_IND_DATA_HI] = 0x71, + [REG_IND_DATA_LO] = 0x75, + [REG_IND_MIB_CHECK] = 0x75, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x09, + [S_TAIL_TAG_CTRL] = 0x0C, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8895_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(7), + [SW_TAIL_TAG_ENABLE] = BIT(1), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(6, 0), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7), + [VLAN_TABLE_VALID] = BIT(12), + [STATIC_MAC_TABLE_VALID] = BIT(21), + [STATIC_MAC_TABLE_USE_FID] = BIT(23), + [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), +}; + +static const u8 ksz8895_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 7, + [VLAN_TABLE] = 13, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 24, + [DYNAMIC_MAC_ENTRIES_H] = 3, + [DYNAMIC_MAC_ENTRIES] = 29, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 27, + [DYNAMIC_MAC_SRC_PORT] = 24, +}; + +static const u16 ksz9477_regs[] = { + [REG_SW_MAC_ADDR] = 0x0302, + [P_STP_CTRL] = 0x0B04, + [S_START_CTRL] = 0x0300, + [S_BROADCAST_CTRL] = 0x0332, + [S_MULTICAST_CTRL] = 0x0331, + [P_XMII_CTRL_0] = 0x0300, + [P_XMII_CTRL_1] = 0x0301, + [REG_SW_PME_CTRL] = 0x0006, + [REG_PORT_PME_STATUS] = 0x0013, + [REG_PORT_PME_CTRL] = 0x0017, +}; + +static const u32 ksz9477_masks[] = { + [ALU_STAT_WRITE] = 0, + [ALU_STAT_READ] = 1, + [ALU_STAT_DIRECT] = 0, + [ALU_RESV_MCAST_ADDR] = BIT(1), + [P_MII_TX_FLOW_CTRL] = BIT(5), + [P_MII_RX_FLOW_CTRL] = BIT(3), +}; + +static const u8 ksz9477_shifts[] = { + [ALU_STAT_INDEX] = 16, +}; + +static const u8 ksz9477_xmii_ctrl0[] = { + [P_MII_100MBIT] = 1, + [P_MII_10MBIT] = 0, + [P_MII_FULL_DUPLEX] = 1, + [P_MII_HALF_DUPLEX] = 0, +}; + +static const u8 ksz9477_xmii_ctrl1[] = { + [P_RGMII_SEL] = 0, + [P_RMII_SEL] = 1, + [P_GMII_SEL] = 2, + [P_MII_SEL] = 3, + [P_GMII_1GBIT] = 0, + [P_GMII_NOT_1GBIT] = 1, +}; + +static const u32 lan937x_masks[] = { + [ALU_STAT_WRITE] = 1, + [ALU_STAT_READ] = 2, + [ALU_STAT_DIRECT] = BIT(3), + [ALU_RESV_MCAST_ADDR] = BIT(2), + [P_MII_TX_FLOW_CTRL] = BIT(5), + [P_MII_RX_FLOW_CTRL] = BIT(3), +}; + +static const u8 lan937x_shifts[] = { + [ALU_STAT_INDEX] = 8, +}; + +static const struct regmap_range ksz8563_valid_regs[] = { + regmap_reg_range(0x0000, 0x0003), + regmap_reg_range(0x0006, 0x0006), + regmap_reg_range(0x000f, 0x001f), + regmap_reg_range(0x0100, 0x0100), + regmap_reg_range(0x0104, 0x0107), + regmap_reg_range(0x010d, 0x010d), + regmap_reg_range(0x0110, 0x0113), + regmap_reg_range(0x0120, 0x012b), + regmap_reg_range(0x0201, 0x0201), + regmap_reg_range(0x0210, 0x0213), + regmap_reg_range(0x0300, 0x0300), + regmap_reg_range(0x0302, 0x031b), + regmap_reg_range(0x0320, 0x032b), + regmap_reg_range(0x0330, 0x0336), + regmap_reg_range(0x0338, 0x033e), + regmap_reg_range(0x0340, 0x035f), + regmap_reg_range(0x0370, 0x0370), + regmap_reg_range(0x0378, 0x0378), + regmap_reg_range(0x037c, 0x037d), + regmap_reg_range(0x0390, 0x0393), + regmap_reg_range(0x0400, 0x040e), + regmap_reg_range(0x0410, 0x042f), + regmap_reg_range(0x0500, 0x0519), + regmap_reg_range(0x0520, 0x054b), + regmap_reg_range(0x0550, 0x05b3), + + /* port 1 */ + regmap_reg_range(0x1000, 0x1001), + regmap_reg_range(0x1004, 0x100b), + regmap_reg_range(0x1013, 0x1013), + regmap_reg_range(0x1017, 0x1017), + regmap_reg_range(0x101b, 0x101b), + regmap_reg_range(0x101f, 0x1021), + regmap_reg_range(0x1030, 0x1030), + regmap_reg_range(0x1100, 0x1111), + regmap_reg_range(0x111a, 0x111d), + regmap_reg_range(0x1122, 0x1127), + regmap_reg_range(0x112a, 0x112b), + regmap_reg_range(0x1136, 0x1139), + regmap_reg_range(0x113e, 0x113f), + regmap_reg_range(0x1400, 0x1401), + regmap_reg_range(0x1403, 0x1403), + regmap_reg_range(0x1410, 0x1417), + regmap_reg_range(0x1420, 0x1423), + regmap_reg_range(0x1500, 0x1507), + regmap_reg_range(0x1600, 0x1612), + regmap_reg_range(0x1800, 0x180f), + regmap_reg_range(0x1900, 0x1907), + regmap_reg_range(0x1914, 0x191b), + regmap_reg_range(0x1a00, 0x1a03), + regmap_reg_range(0x1a04, 0x1a08), + regmap_reg_range(0x1b00, 0x1b01), + regmap_reg_range(0x1b04, 0x1b04), + regmap_reg_range(0x1c00, 0x1c05), + regmap_reg_range(0x1c08, 0x1c1b), + + /* port 2 */ + regmap_reg_range(0x2000, 0x2001), + regmap_reg_range(0x2004, 0x200b), + regmap_reg_range(0x2013, 0x2013), + regmap_reg_range(0x2017, 0x2017), + regmap_reg_range(0x201b, 0x201b), + regmap_reg_range(0x201f, 0x2021), + regmap_reg_range(0x2030, 0x2030), + regmap_reg_range(0x2100, 0x2111), + regmap_reg_range(0x211a, 0x211d), + regmap_reg_range(0x2122, 0x2127), + regmap_reg_range(0x212a, 0x212b), + regmap_reg_range(0x2136, 0x2139), + regmap_reg_range(0x213e, 0x213f), + regmap_reg_range(0x2400, 0x2401), + regmap_reg_range(0x2403, 0x2403), + regmap_reg_range(0x2410, 0x2417), + regmap_reg_range(0x2420, 0x2423), + regmap_reg_range(0x2500, 0x2507), + regmap_reg_range(0x2600, 0x2612), + regmap_reg_range(0x2800, 0x280f), + regmap_reg_range(0x2900, 0x2907), + regmap_reg_range(0x2914, 0x291b), + regmap_reg_range(0x2a00, 0x2a03), + regmap_reg_range(0x2a04, 0x2a08), + regmap_reg_range(0x2b00, 0x2b01), + regmap_reg_range(0x2b04, 0x2b04), + regmap_reg_range(0x2c00, 0x2c05), + regmap_reg_range(0x2c08, 0x2c1b), + + /* port 3 */ + regmap_reg_range(0x3000, 0x3001), + regmap_reg_range(0x3004, 0x300b), + regmap_reg_range(0x3013, 0x3013), + regmap_reg_range(0x3017, 0x3017), + regmap_reg_range(0x301b, 0x301b), + regmap_reg_range(0x301f, 0x3021), + regmap_reg_range(0x3030, 0x3030), + regmap_reg_range(0x3300, 0x3301), + regmap_reg_range(0x3303, 0x3303), + regmap_reg_range(0x3400, 0x3401), + regmap_reg_range(0x3403, 0x3403), + regmap_reg_range(0x3410, 0x3417), + regmap_reg_range(0x3420, 0x3423), + regmap_reg_range(0x3500, 0x3507), + regmap_reg_range(0x3600, 0x3612), + regmap_reg_range(0x3800, 0x380f), + regmap_reg_range(0x3900, 0x3907), + regmap_reg_range(0x3914, 0x391b), + regmap_reg_range(0x3a00, 0x3a03), + regmap_reg_range(0x3a04, 0x3a08), + regmap_reg_range(0x3b00, 0x3b01), + regmap_reg_range(0x3b04, 0x3b04), + regmap_reg_range(0x3c00, 0x3c05), + regmap_reg_range(0x3c08, 0x3c1b), +}; + +static const struct regmap_access_table ksz8563_register_set = { + .yes_ranges = ksz8563_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs), +}; + +static const struct regmap_range ksz9477_valid_regs[] = { + regmap_reg_range(0x0000, 0x0003), + regmap_reg_range(0x0006, 0x0006), + regmap_reg_range(0x0010, 0x001f), + regmap_reg_range(0x0100, 0x0100), + regmap_reg_range(0x0103, 0x0107), + regmap_reg_range(0x010d, 0x010d), + regmap_reg_range(0x0110, 0x0113), + regmap_reg_range(0x0120, 0x012b), + regmap_reg_range(0x0201, 0x0201), + regmap_reg_range(0x0210, 0x0213), + regmap_reg_range(0x0300, 0x0300), + regmap_reg_range(0x0302, 0x031b), + regmap_reg_range(0x0320, 0x032b), + regmap_reg_range(0x0330, 0x0336), + regmap_reg_range(0x0338, 0x033b), + regmap_reg_range(0x033e, 0x033e), + regmap_reg_range(0x0340, 0x035f), + regmap_reg_range(0x0370, 0x0370), + regmap_reg_range(0x0378, 0x0378), + regmap_reg_range(0x037c, 0x037d), + regmap_reg_range(0x0390, 0x0393), + regmap_reg_range(0x0400, 0x040e), + regmap_reg_range(0x0410, 0x042f), + regmap_reg_range(0x0444, 0x044b), + regmap_reg_range(0x0450, 0x046f), + regmap_reg_range(0x0500, 0x0519), + regmap_reg_range(0x0520, 0x054b), + regmap_reg_range(0x0550, 0x05b3), + regmap_reg_range(0x0604, 0x060b), + regmap_reg_range(0x0610, 0x0612), + regmap_reg_range(0x0614, 0x062c), + regmap_reg_range(0x0640, 0x0645), + regmap_reg_range(0x0648, 0x064d), + + /* port 1 */ + regmap_reg_range(0x1000, 0x1001), + regmap_reg_range(0x1013, 0x1013), + regmap_reg_range(0x1017, 0x1017), + regmap_reg_range(0x101b, 0x101b), + regmap_reg_range(0x101f, 0x1020), + regmap_reg_range(0x1030, 0x1030), + regmap_reg_range(0x1100, 0x1115), + regmap_reg_range(0x111a, 0x111f), + regmap_reg_range(0x1120, 0x112b), + regmap_reg_range(0x1134, 0x113b), + regmap_reg_range(0x113c, 0x113f), + regmap_reg_range(0x1400, 0x1401), + regmap_reg_range(0x1403, 0x1403), + regmap_reg_range(0x1410, 0x1417), + regmap_reg_range(0x1420, 0x1423), + regmap_reg_range(0x1500, 0x1507), + regmap_reg_range(0x1600, 0x1613), + regmap_reg_range(0x1800, 0x180f), + regmap_reg_range(0x1820, 0x1827), + regmap_reg_range(0x1830, 0x1837), + regmap_reg_range(0x1840, 0x184b), + regmap_reg_range(0x1900, 0x1907), + regmap_reg_range(0x1914, 0x191b), + regmap_reg_range(0x1920, 0x1920), + regmap_reg_range(0x1923, 0x1927), + regmap_reg_range(0x1a00, 0x1a03), + regmap_reg_range(0x1a04, 0x1a07), + regmap_reg_range(0x1b00, 0x1b01), + regmap_reg_range(0x1b04, 0x1b04), + regmap_reg_range(0x1c00, 0x1c05), + regmap_reg_range(0x1c08, 0x1c1b), + + /* port 2 */ + regmap_reg_range(0x2000, 0x2001), + regmap_reg_range(0x2013, 0x2013), + regmap_reg_range(0x2017, 0x2017), + regmap_reg_range(0x201b, 0x201b), + regmap_reg_range(0x201f, 0x2020), + regmap_reg_range(0x2030, 0x2030), + regmap_reg_range(0x2100, 0x2115), + regmap_reg_range(0x211a, 0x211f), + regmap_reg_range(0x2120, 0x212b), + regmap_reg_range(0x2134, 0x213b), + regmap_reg_range(0x213c, 0x213f), + regmap_reg_range(0x2400, 0x2401), + regmap_reg_range(0x2403, 0x2403), + regmap_reg_range(0x2410, 0x2417), + regmap_reg_range(0x2420, 0x2423), + regmap_reg_range(0x2500, 0x2507), + regmap_reg_range(0x2600, 0x2613), + regmap_reg_range(0x2800, 0x280f), + regmap_reg_range(0x2820, 0x2827), + regmap_reg_range(0x2830, 0x2837), + regmap_reg_range(0x2840, 0x284b), + regmap_reg_range(0x2900, 0x2907), + regmap_reg_range(0x2914, 0x291b), + regmap_reg_range(0x2920, 0x2920), + regmap_reg_range(0x2923, 0x2927), + regmap_reg_range(0x2a00, 0x2a03), + regmap_reg_range(0x2a04, 0x2a07), + regmap_reg_range(0x2b00, 0x2b01), + regmap_reg_range(0x2b04, 0x2b04), + regmap_reg_range(0x2c00, 0x2c05), + regmap_reg_range(0x2c08, 0x2c1b), + + /* port 3 */ + regmap_reg_range(0x3000, 0x3001), + regmap_reg_range(0x3013, 0x3013), + regmap_reg_range(0x3017, 0x3017), + regmap_reg_range(0x301b, 0x301b), + regmap_reg_range(0x301f, 0x3020), + regmap_reg_range(0x3030, 0x3030), + regmap_reg_range(0x3100, 0x3115), + regmap_reg_range(0x311a, 0x311f), + regmap_reg_range(0x3120, 0x312b), + regmap_reg_range(0x3134, 0x313b), + regmap_reg_range(0x313c, 0x313f), + regmap_reg_range(0x3400, 0x3401), + regmap_reg_range(0x3403, 0x3403), + regmap_reg_range(0x3410, 0x3417), + regmap_reg_range(0x3420, 0x3423), + regmap_reg_range(0x3500, 0x3507), + regmap_reg_range(0x3600, 0x3613), + regmap_reg_range(0x3800, 0x380f), + regmap_reg_range(0x3820, 0x3827), + regmap_reg_range(0x3830, 0x3837), + regmap_reg_range(0x3840, 0x384b), + regmap_reg_range(0x3900, 0x3907), + regmap_reg_range(0x3914, 0x391b), + regmap_reg_range(0x3920, 0x3920), + regmap_reg_range(0x3923, 0x3927), + regmap_reg_range(0x3a00, 0x3a03), + regmap_reg_range(0x3a04, 0x3a07), + regmap_reg_range(0x3b00, 0x3b01), + regmap_reg_range(0x3b04, 0x3b04), + regmap_reg_range(0x3c00, 0x3c05), + regmap_reg_range(0x3c08, 0x3c1b), + + /* port 4 */ + regmap_reg_range(0x4000, 0x4001), + regmap_reg_range(0x4013, 0x4013), + regmap_reg_range(0x4017, 0x4017), + regmap_reg_range(0x401b, 0x401b), + regmap_reg_range(0x401f, 0x4020), + regmap_reg_range(0x4030, 0x4030), + regmap_reg_range(0x4100, 0x4115), + regmap_reg_range(0x411a, 0x411f), + regmap_reg_range(0x4120, 0x412b), + regmap_reg_range(0x4134, 0x413b), + regmap_reg_range(0x413c, 0x413f), + regmap_reg_range(0x4400, 0x4401), + regmap_reg_range(0x4403, 0x4403), + regmap_reg_range(0x4410, 0x4417), + regmap_reg_range(0x4420, 0x4423), + regmap_reg_range(0x4500, 0x4507), + regmap_reg_range(0x4600, 0x4613), + regmap_reg_range(0x4800, 0x480f), + regmap_reg_range(0x4820, 0x4827), + regmap_reg_range(0x4830, 0x4837), + regmap_reg_range(0x4840, 0x484b), + regmap_reg_range(0x4900, 0x4907), + regmap_reg_range(0x4914, 0x491b), + regmap_reg_range(0x4920, 0x4920), + regmap_reg_range(0x4923, 0x4927), + regmap_reg_range(0x4a00, 0x4a03), + regmap_reg_range(0x4a04, 0x4a07), + regmap_reg_range(0x4b00, 0x4b01), + regmap_reg_range(0x4b04, 0x4b04), + regmap_reg_range(0x4c00, 0x4c05), + regmap_reg_range(0x4c08, 0x4c1b), + + /* port 5 */ + regmap_reg_range(0x5000, 0x5001), + regmap_reg_range(0x5013, 0x5013), + regmap_reg_range(0x5017, 0x5017), + regmap_reg_range(0x501b, 0x501b), + regmap_reg_range(0x501f, 0x5020), + regmap_reg_range(0x5030, 0x5030), + regmap_reg_range(0x5100, 0x5115), + regmap_reg_range(0x511a, 0x511f), + regmap_reg_range(0x5120, 0x512b), + regmap_reg_range(0x5134, 0x513b), + regmap_reg_range(0x513c, 0x513f), + regmap_reg_range(0x5400, 0x5401), + regmap_reg_range(0x5403, 0x5403), + regmap_reg_range(0x5410, 0x5417), + regmap_reg_range(0x5420, 0x5423), + regmap_reg_range(0x5500, 0x5507), + regmap_reg_range(0x5600, 0x5613), + regmap_reg_range(0x5800, 0x580f), + regmap_reg_range(0x5820, 0x5827), + regmap_reg_range(0x5830, 0x5837), + regmap_reg_range(0x5840, 0x584b), + regmap_reg_range(0x5900, 0x5907), + regmap_reg_range(0x5914, 0x591b), + regmap_reg_range(0x5920, 0x5920), + regmap_reg_range(0x5923, 0x5927), + regmap_reg_range(0x5a00, 0x5a03), + regmap_reg_range(0x5a04, 0x5a07), + regmap_reg_range(0x5b00, 0x5b01), + regmap_reg_range(0x5b04, 0x5b04), + regmap_reg_range(0x5c00, 0x5c05), + regmap_reg_range(0x5c08, 0x5c1b), + + /* port 6 */ + regmap_reg_range(0x6000, 0x6001), + regmap_reg_range(0x6013, 0x6013), + regmap_reg_range(0x6017, 0x6017), + regmap_reg_range(0x601b, 0x601b), + regmap_reg_range(0x601f, 0x6020), + regmap_reg_range(0x6030, 0x6030), + regmap_reg_range(0x6300, 0x6301), + regmap_reg_range(0x6400, 0x6401), + regmap_reg_range(0x6403, 0x6403), + regmap_reg_range(0x6410, 0x6417), + regmap_reg_range(0x6420, 0x6423), + regmap_reg_range(0x6500, 0x6507), + regmap_reg_range(0x6600, 0x6613), + regmap_reg_range(0x6800, 0x680f), + regmap_reg_range(0x6820, 0x6827), + regmap_reg_range(0x6830, 0x6837), + regmap_reg_range(0x6840, 0x684b), + regmap_reg_range(0x6900, 0x6907), + regmap_reg_range(0x6914, 0x691b), + regmap_reg_range(0x6920, 0x6920), + regmap_reg_range(0x6923, 0x6927), + regmap_reg_range(0x6a00, 0x6a03), + regmap_reg_range(0x6a04, 0x6a07), + regmap_reg_range(0x6b00, 0x6b01), + regmap_reg_range(0x6b04, 0x6b04), + regmap_reg_range(0x6c00, 0x6c05), + regmap_reg_range(0x6c08, 0x6c1b), + + /* port 7 */ + regmap_reg_range(0x7000, 0x7001), + regmap_reg_range(0x7013, 0x7013), + regmap_reg_range(0x7017, 0x7017), + regmap_reg_range(0x701b, 0x701b), + regmap_reg_range(0x701f, 0x7020), + regmap_reg_range(0x7030, 0x7030), + regmap_reg_range(0x7200, 0x7207), + regmap_reg_range(0x7300, 0x7301), + regmap_reg_range(0x7400, 0x7401), + regmap_reg_range(0x7403, 0x7403), + regmap_reg_range(0x7410, 0x7417), + regmap_reg_range(0x7420, 0x7423), + regmap_reg_range(0x7500, 0x7507), + regmap_reg_range(0x7600, 0x7613), + regmap_reg_range(0x7800, 0x780f), + regmap_reg_range(0x7820, 0x7827), + regmap_reg_range(0x7830, 0x7837), + regmap_reg_range(0x7840, 0x784b), + regmap_reg_range(0x7900, 0x7907), + regmap_reg_range(0x7914, 0x791b), + regmap_reg_range(0x7920, 0x7920), + regmap_reg_range(0x7923, 0x7927), + regmap_reg_range(0x7a00, 0x7a03), + regmap_reg_range(0x7a04, 0x7a07), + regmap_reg_range(0x7b00, 0x7b01), + regmap_reg_range(0x7b04, 0x7b04), + regmap_reg_range(0x7c00, 0x7c05), + regmap_reg_range(0x7c08, 0x7c1b), +}; + +static const struct regmap_access_table ksz9477_register_set = { + .yes_ranges = ksz9477_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ksz9477_valid_regs), +}; + +static const struct regmap_range ksz9896_valid_regs[] = { + regmap_reg_range(0x0000, 0x0003), + regmap_reg_range(0x0006, 0x0006), + regmap_reg_range(0x0010, 0x001f), + regmap_reg_range(0x0100, 0x0100), + regmap_reg_range(0x0103, 0x0107), + regmap_reg_range(0x010d, 0x010d), + regmap_reg_range(0x0110, 0x0113), + regmap_reg_range(0x0120, 0x0127), + regmap_reg_range(0x0201, 0x0201), + regmap_reg_range(0x0210, 0x0213), + regmap_reg_range(0x0300, 0x0300), + regmap_reg_range(0x0302, 0x030b), + regmap_reg_range(0x0310, 0x031b), + regmap_reg_range(0x0320, 0x032b), + regmap_reg_range(0x0330, 0x0336), + regmap_reg_range(0x0338, 0x033b), + regmap_reg_range(0x033e, 0x033e), + regmap_reg_range(0x0340, 0x035f), + regmap_reg_range(0x0370, 0x0370), + regmap_reg_range(0x0378, 0x0378), + regmap_reg_range(0x037c, 0x037d), + regmap_reg_range(0x0390, 0x0393), + regmap_reg_range(0x0400, 0x040e), + regmap_reg_range(0x0410, 0x042f), + + /* port 1 */ + regmap_reg_range(0x1000, 0x1001), + regmap_reg_range(0x1013, 0x1013), + regmap_reg_range(0x1017, 0x1017), + regmap_reg_range(0x101b, 0x101b), + regmap_reg_range(0x101f, 0x1020), + regmap_reg_range(0x1030, 0x1030), + regmap_reg_range(0x1100, 0x1115), + regmap_reg_range(0x111a, 0x111f), + regmap_reg_range(0x1120, 0x112b), + regmap_reg_range(0x1134, 0x113b), + regmap_reg_range(0x113c, 0x113f), + regmap_reg_range(0x1400, 0x1401), + regmap_reg_range(0x1403, 0x1403), + regmap_reg_range(0x1410, 0x1417), + regmap_reg_range(0x1420, 0x1423), + regmap_reg_range(0x1500, 0x1507), + regmap_reg_range(0x1600, 0x1612), + regmap_reg_range(0x1800, 0x180f), + regmap_reg_range(0x1820, 0x1827), + regmap_reg_range(0x1830, 0x1837), + regmap_reg_range(0x1840, 0x184b), + regmap_reg_range(0x1900, 0x1907), + regmap_reg_range(0x1914, 0x1915), + regmap_reg_range(0x1a00, 0x1a03), + regmap_reg_range(0x1a04, 0x1a07), + regmap_reg_range(0x1b00, 0x1b01), + regmap_reg_range(0x1b04, 0x1b04), + + /* port 2 */ + regmap_reg_range(0x2000, 0x2001), + regmap_reg_range(0x2013, 0x2013), + regmap_reg_range(0x2017, 0x2017), + regmap_reg_range(0x201b, 0x201b), + regmap_reg_range(0x201f, 0x2020), + regmap_reg_range(0x2030, 0x2030), + regmap_reg_range(0x2100, 0x2115), + regmap_reg_range(0x211a, 0x211f), + regmap_reg_range(0x2120, 0x212b), + regmap_reg_range(0x2134, 0x213b), + regmap_reg_range(0x213c, 0x213f), + regmap_reg_range(0x2400, 0x2401), + regmap_reg_range(0x2403, 0x2403), + regmap_reg_range(0x2410, 0x2417), + regmap_reg_range(0x2420, 0x2423), + regmap_reg_range(0x2500, 0x2507), + regmap_reg_range(0x2600, 0x2612), + regmap_reg_range(0x2800, 0x280f), + regmap_reg_range(0x2820, 0x2827), + regmap_reg_range(0x2830, 0x2837), + regmap_reg_range(0x2840, 0x284b), + regmap_reg_range(0x2900, 0x2907), + regmap_reg_range(0x2914, 0x2915), + regmap_reg_range(0x2a00, 0x2a03), + regmap_reg_range(0x2a04, 0x2a07), + regmap_reg_range(0x2b00, 0x2b01), + regmap_reg_range(0x2b04, 0x2b04), + + /* port 3 */ + regmap_reg_range(0x3000, 0x3001), + regmap_reg_range(0x3013, 0x3013), + regmap_reg_range(0x3017, 0x3017), + regmap_reg_range(0x301b, 0x301b), + regmap_reg_range(0x301f, 0x3020), + regmap_reg_range(0x3030, 0x3030), + regmap_reg_range(0x3100, 0x3115), + regmap_reg_range(0x311a, 0x311f), + regmap_reg_range(0x3120, 0x312b), + regmap_reg_range(0x3134, 0x313b), + regmap_reg_range(0x313c, 0x313f), + regmap_reg_range(0x3400, 0x3401), + regmap_reg_range(0x3403, 0x3403), + regmap_reg_range(0x3410, 0x3417), + regmap_reg_range(0x3420, 0x3423), + regmap_reg_range(0x3500, 0x3507), + regmap_reg_range(0x3600, 0x3612), + regmap_reg_range(0x3800, 0x380f), + regmap_reg_range(0x3820, 0x3827), + regmap_reg_range(0x3830, 0x3837), + regmap_reg_range(0x3840, 0x384b), + regmap_reg_range(0x3900, 0x3907), + regmap_reg_range(0x3914, 0x3915), + regmap_reg_range(0x3a00, 0x3a03), + regmap_reg_range(0x3a04, 0x3a07), + regmap_reg_range(0x3b00, 0x3b01), + regmap_reg_range(0x3b04, 0x3b04), + + /* port 4 */ + regmap_reg_range(0x4000, 0x4001), + regmap_reg_range(0x4013, 0x4013), + regmap_reg_range(0x4017, 0x4017), + regmap_reg_range(0x401b, 0x401b), + regmap_reg_range(0x401f, 0x4020), + regmap_reg_range(0x4030, 0x4030), + regmap_reg_range(0x4100, 0x4115), + regmap_reg_range(0x411a, 0x411f), + regmap_reg_range(0x4120, 0x412b), + regmap_reg_range(0x4134, 0x413b), + regmap_reg_range(0x413c, 0x413f), + regmap_reg_range(0x4400, 0x4401), + regmap_reg_range(0x4403, 0x4403), + regmap_reg_range(0x4410, 0x4417), + regmap_reg_range(0x4420, 0x4423), + regmap_reg_range(0x4500, 0x4507), + regmap_reg_range(0x4600, 0x4612), + regmap_reg_range(0x4800, 0x480f), + regmap_reg_range(0x4820, 0x4827), + regmap_reg_range(0x4830, 0x4837), + regmap_reg_range(0x4840, 0x484b), + regmap_reg_range(0x4900, 0x4907), + regmap_reg_range(0x4914, 0x4915), + regmap_reg_range(0x4a00, 0x4a03), + regmap_reg_range(0x4a04, 0x4a07), + regmap_reg_range(0x4b00, 0x4b01), + regmap_reg_range(0x4b04, 0x4b04), + + /* port 5 */ + regmap_reg_range(0x5000, 0x5001), + regmap_reg_range(0x5013, 0x5013), + regmap_reg_range(0x5017, 0x5017), + regmap_reg_range(0x501b, 0x501b), + regmap_reg_range(0x501f, 0x5020), + regmap_reg_range(0x5030, 0x5030), + regmap_reg_range(0x5100, 0x5115), + regmap_reg_range(0x511a, 0x511f), + regmap_reg_range(0x5120, 0x512b), + regmap_reg_range(0x5134, 0x513b), + regmap_reg_range(0x513c, 0x513f), + regmap_reg_range(0x5400, 0x5401), + regmap_reg_range(0x5403, 0x5403), + regmap_reg_range(0x5410, 0x5417), + regmap_reg_range(0x5420, 0x5423), + regmap_reg_range(0x5500, 0x5507), + regmap_reg_range(0x5600, 0x5612), + regmap_reg_range(0x5800, 0x580f), + regmap_reg_range(0x5820, 0x5827), + regmap_reg_range(0x5830, 0x5837), + regmap_reg_range(0x5840, 0x584b), + regmap_reg_range(0x5900, 0x5907), + regmap_reg_range(0x5914, 0x5915), + regmap_reg_range(0x5a00, 0x5a03), + regmap_reg_range(0x5a04, 0x5a07), + regmap_reg_range(0x5b00, 0x5b01), + regmap_reg_range(0x5b04, 0x5b04), + + /* port 6 */ + regmap_reg_range(0x6000, 0x6001), + regmap_reg_range(0x6013, 0x6013), + regmap_reg_range(0x6017, 0x6017), + regmap_reg_range(0x601b, 0x601b), + regmap_reg_range(0x601f, 0x6020), + regmap_reg_range(0x6030, 0x6030), + regmap_reg_range(0x6100, 0x6115), + regmap_reg_range(0x611a, 0x611f), + regmap_reg_range(0x6120, 0x612b), + regmap_reg_range(0x6134, 0x613b), + regmap_reg_range(0x613c, 0x613f), + regmap_reg_range(0x6300, 0x6301), + regmap_reg_range(0x6400, 0x6401), + regmap_reg_range(0x6403, 0x6403), + regmap_reg_range(0x6410, 0x6417), + regmap_reg_range(0x6420, 0x6423), + regmap_reg_range(0x6500, 0x6507), + regmap_reg_range(0x6600, 0x6612), + regmap_reg_range(0x6800, 0x680f), + regmap_reg_range(0x6820, 0x6827), + regmap_reg_range(0x6830, 0x6837), + regmap_reg_range(0x6840, 0x684b), + regmap_reg_range(0x6900, 0x6907), + regmap_reg_range(0x6914, 0x6915), + regmap_reg_range(0x6a00, 0x6a03), + regmap_reg_range(0x6a04, 0x6a07), + regmap_reg_range(0x6b00, 0x6b01), + regmap_reg_range(0x6b04, 0x6b04), +}; + +static const struct regmap_access_table ksz9896_register_set = { + .yes_ranges = ksz9896_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs), +}; + +static const struct regmap_range ksz8873_valid_regs[] = { + regmap_reg_range(0x00, 0x01), + /* global control register */ + regmap_reg_range(0x02, 0x0f), + + /* port registers */ + regmap_reg_range(0x10, 0x1d), + regmap_reg_range(0x1e, 0x1f), + regmap_reg_range(0x20, 0x2d), + regmap_reg_range(0x2e, 0x2f), + regmap_reg_range(0x30, 0x39), + regmap_reg_range(0x3f, 0x3f), + + /* advanced control registers */ + regmap_reg_range(0x43, 0x43), + regmap_reg_range(0x60, 0x6f), + regmap_reg_range(0x70, 0x75), + regmap_reg_range(0x76, 0x78), + regmap_reg_range(0x79, 0x7a), + regmap_reg_range(0x7b, 0x83), + regmap_reg_range(0x8e, 0x99), + regmap_reg_range(0x9a, 0xa5), + regmap_reg_range(0xa6, 0xa6), + regmap_reg_range(0xa7, 0xaa), + regmap_reg_range(0xab, 0xae), + regmap_reg_range(0xaf, 0xba), + regmap_reg_range(0xbb, 0xbc), + regmap_reg_range(0xbd, 0xbd), + regmap_reg_range(0xc0, 0xc0), + regmap_reg_range(0xc2, 0xc2), + regmap_reg_range(0xc3, 0xc3), + regmap_reg_range(0xc4, 0xc4), + regmap_reg_range(0xc6, 0xc6), +}; + +static const struct regmap_access_table ksz8873_register_set = { + .yes_ranges = ksz8873_valid_regs, + .n_yes_ranges = ARRAY_SIZE(ksz8873_valid_regs), +}; + +const struct ksz_chip_data ksz_switch_chips[] = { + [KSZ8463] = { + .chip_id = KSZ8463_CHIP_ID, + .dev_name = "KSZ8463", + .num_vlans = 16, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x4, /* can be configured as cpu port */ + .port_cnt = 3, + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz8463_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8463_regs, + .masks = ksz8463_masks, + .shifts = ksz8463_shifts, + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .internal_phy = {true, true, false}, + }, + + [KSZ8563] = { + .chip_id = KSZ8563_CHIP_ID, + .dev_name = "KSZ8563", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x07, /* can be configured as cpu port */ + .port_cnt = 3, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */ + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .supports_rgmii = {false, false, true}, + .internal_phy = {true, true, false}, + .gbit_capable = {false, false, true}, + .ptp_capable = true, + .wr_table = &ksz8563_register_set, + .rd_table = &ksz8563_register_set, + }, + + [KSZ8795] = { + .chip_id = KSZ8795_CHIP_ID, + .dev_name = "KSZ8795", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, + .ksz87xx_eee_link_erratum = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8795_regs, + .masks = ksz8795_masks, + .shifts = ksz8795_shifts, + .xmii_ctrl0 = ksz8795_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .supports_rgmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + + [KSZ8794] = { + /* WARNING + * ======= + * KSZ8794 is similar to KSZ8795, except the port map + * contains a gap between external and CPU ports, the + * port map is NOT continuous. The per-port register + * map is shifted accordingly too, i.e. registers at + * offset 0x40 are NOT used on KSZ8794 and they ARE + * used on KSZ8795 for external port 3. + * external cpu + * KSZ8794 0,1,2 4 + * KSZ8795 0,1,2,3 4 + * KSZ8765 0,1,2,3 4 + * port_cnt is configured as 5, even though it is 4 + */ + .chip_id = KSZ8794_CHIP_ID, + .dev_name = "KSZ8794", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, + .ksz87xx_eee_link_erratum = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8795_regs, + .masks = ksz8795_masks, + .shifts = ksz8795_shifts, + .xmii_ctrl0 = ksz8795_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .supports_rgmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, false, false}, + }, + + [KSZ8765] = { + .chip_id = KSZ8765_CHIP_ID, + .dev_name = "KSZ8765", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, + .ksz87xx_eee_link_erratum = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8795_regs, + .masks = ksz8795_masks, + .shifts = ksz8795_shifts, + .xmii_ctrl0 = ksz8795_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .supports_rgmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + + [KSZ88X3] = { + .chip_id = KSZ88X3_CHIP_ID, + .dev_name = "KSZ8863/KSZ8873", + .num_vlans = 16, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x4, /* can be configured as cpu port */ + .port_cnt = 3, + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8863_regs, + .masks = ksz8863_masks, + .shifts = ksz8863_shifts, + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .internal_phy = {true, true, false}, + .wr_table = &ksz8873_register_set, + .rd_table = &ksz8873_register_set, + }, + + [KSZ8864] = { + /* WARNING + * ======= + * KSZ8864 is similar to KSZ8895, except the first port + * does not exist. + * external cpu + * KSZ8864 1,2,3 4 + * KSZ8895 0,1,2,3 4 + * port_cnt is configured as 5, even though it is 4 + */ + .chip_id = KSZ8864_CHIP_ID, + .dev_name = "KSZ8864", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {false, true, true, true, false}, + }, + + [KSZ8895] = { + .chip_id = KSZ8895_CHIP_ID, + .dev_name = "KSZ8895", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + + [KSZ9477] = { + .chip_id = KSZ9477_CHIP_ID, + .dev_name = "KSZ9477", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 4, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, false}, + .supports_rmii = {false, false, false, false, + false, true, false}, + .supports_rgmii = {false, false, false, false, + false, true, false}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, + .sgmii_port = 7, + .wr_table = &ksz9477_register_set, + .rd_table = &ksz9477_register_set, + }, + + [KSZ9896] = { + .chip_id = KSZ9896_CHIP_ID, + .dev_name = "KSZ9896", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x3F, /* can be configured as cpu port */ + .port_cnt = 6, /* total physical port count */ + .port_nirqs = 2, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true}, + .supports_rmii = {false, false, false, false, + false, true}, + .supports_rgmii = {false, false, false, false, + false, true}, + .internal_phy = {true, true, true, true, + true, false}, + .gbit_capable = {true, true, true, true, true, true}, + .wr_table = &ksz9896_register_set, + .rd_table = &ksz9896_register_set, + }, + + [KSZ9897] = { + .chip_id = KSZ9897_CHIP_ID, + .dev_name = "KSZ9897", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 2, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + }, + + [KSZ9893] = { + .chip_id = KSZ9893_CHIP_ID, + .dev_name = "KSZ9893", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x07, /* can be configured as cpu port */ + .port_cnt = 3, /* total port count */ + .port_nirqs = 2, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */ + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .supports_rgmii = {false, false, true}, + .internal_phy = {true, true, false}, + .gbit_capable = {true, true, true}, + }, + + [KSZ9563] = { + .chip_id = KSZ9563_CHIP_ID, + .dev_name = "KSZ9563", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x07, /* can be configured as cpu port */ + .port_cnt = 3, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */ + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .supports_rgmii = {false, false, true}, + .internal_phy = {true, true, false}, + .gbit_capable = {true, true, true}, + .ptp_capable = true, + }, + + [KSZ8567] = { + .chip_id = KSZ8567_CHIP_ID, + .dev_name = "KSZ8567", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {false, false, false, false, false, + true, true}, + .ptp_capable = true, + }, + + [KSZ9567] = { + .chip_id = KSZ9567_CHIP_ID, + .dev_name = "KSZ9567", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, + }, + + [LAN9370] = { + .chip_id = LAN9370_CHIP_ID, + .dev_name = "LAN9370", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total physical port count */ + .port_nirqs = 6, + .num_tx_queues = 8, + .num_ipms = 8, + .tc_cbs_supported = true, + .phy_side_mdio_supported = true, + .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .supports_rgmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + .ptp_capable = true, + }, + + [LAN9371] = { + .chip_id = LAN9371_CHIP_ID, + .dev_name = "LAN9371", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + .cpu_ports = 0x30, /* can be configured as cpu port */ + .port_cnt = 6, /* total physical port count */ + .port_nirqs = 6, + .num_tx_queues = 8, + .num_ipms = 8, + .tc_cbs_supported = true, + .phy_side_mdio_supported = true, + .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, true, true}, + .supports_rmii = {false, false, false, false, true, true}, + .supports_rgmii = {false, false, false, false, true, true}, + .internal_phy = {true, true, true, true, false, false}, + .ptp_capable = true, + }, + + [LAN9372] = { + .chip_id = LAN9372_CHIP_ID, + .dev_name = "LAN9372", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + .cpu_ports = 0x30, /* can be configured as cpu port */ + .port_cnt = 8, /* total physical port count */ + .port_nirqs = 6, + .num_tx_queues = 8, + .num_ipms = 8, + .tc_cbs_supported = true, + .phy_side_mdio_supported = true, + .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + true, true, false, false}, + .supports_rmii = {false, false, false, false, + true, true, false, false}, + .supports_rgmii = {false, false, false, false, + true, true, false, false}, + .internal_phy = {true, true, true, true, + false, false, true, true}, + .ptp_capable = true, + }, + + [LAN9373] = { + .chip_id = LAN9373_CHIP_ID, + .dev_name = "LAN9373", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + .cpu_ports = 0x38, /* can be configured as cpu port */ + .port_cnt = 5, /* total physical port count */ + .port_nirqs = 6, + .num_tx_queues = 8, + .num_ipms = 8, + .tc_cbs_supported = true, + .phy_side_mdio_supported = true, + .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + true, true, false, false}, + .supports_rmii = {false, false, false, false, + true, true, false, false}, + .supports_rgmii = {false, false, false, false, + true, true, false, false}, + .internal_phy = {true, true, true, false, + false, false, true, true}, + .ptp_capable = true, + }, + + [LAN9374] = { + .chip_id = LAN9374_CHIP_ID, + .dev_name = "LAN9374", + .num_vlans = 4096, + .num_alus = 1024, + .num_statics = 256, + .cpu_ports = 0x30, /* can be configured as cpu port */ + .port_cnt = 8, /* total physical port count */ + .port_nirqs = 6, + .num_tx_queues = 8, + .num_ipms = 8, + .tc_cbs_supported = true, + .phy_side_mdio_supported = true, + .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = lan937x_masks, + .shifts = lan937x_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + true, true, false, false}, + .supports_rmii = {false, false, false, false, + true, true, false, false}, + .supports_rgmii = {false, false, false, false, + true, true, false, false}, + .internal_phy = {true, true, true, true, + false, false, true, true}, + .ptp_capable = true, + }, + + [LAN9646] = { + .chip_id = LAN9646_CHIP_ID, + .dev_name = "LAN9646", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 4, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, + .wr_table = &ksz9477_register_set, + .rd_table = &ksz9477_register_set, + }, +}; +EXPORT_SYMBOL_GPL(ksz_switch_chips); + +static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) { + const struct ksz_chip_data *chip = &ksz_switch_chips[i]; + + if (chip->chip_id == prod_num) + return chip; + } + + return NULL; +} + +static int ksz_check_device_id(struct ksz_device *dev) +{ + const struct ksz_chip_data *expected_chip_data; + u32 expected_chip_id; + + if (dev->pdata) { + expected_chip_id = dev->pdata->chip_id; + expected_chip_data = ksz_lookup_info(expected_chip_id); + if (WARN_ON(!expected_chip_data)) + return -ENODEV; + } else { + expected_chip_data = of_device_get_match_data(dev->dev); + expected_chip_id = expected_chip_data->chip_id; + } + + if (expected_chip_id != dev->chip_id) { + dev_err(dev->dev, + "Device tree specifies chip %s but found %s, please fix it!\n", + expected_chip_data->dev_name, dev->info->dev_name); + return -ENODEV; + } + + return 0; +} + +static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct ksz_device *dev = ds->priv; + + if (dev->info->supports_mii[port]) + __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); + + if (dev->info->supports_rmii[port]) + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + + if (dev->info->supports_rgmii[port]) + phy_interface_set_rgmii(config->supported_interfaces); + + if (dev->info->internal_phy[port]) { + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + /* Compatibility for phylib's default interface type when the + * phy-mode property is absent + */ + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + } + + if (dev->dev_ops->get_caps) + dev->dev_ops->get_caps(dev, port, config); + + if (ds->ops->support_eee && ds->ops->support_eee(ds, port)) { + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); + + config->lpi_capabilities = MAC_100FD; + if (dev->info->gbit_capable[port]) + config->lpi_capabilities |= MAC_1000FD; + + /* EEE is fully operational */ + config->eee_enabled_default = true; + } +} + +void ksz_r_mib_stats64(struct ksz_device *dev, int port) +{ + struct ethtool_pause_stats *pstats; + struct rtnl_link_stats64 *stats; + struct ksz_stats_raw *raw; + struct ksz_port_mib *mib; + int ret; + + mib = &dev->ports[port].mib; + stats = &mib->stats64; + pstats = &mib->pause_stats; + raw = (struct ksz_stats_raw *)mib->counters; + + spin_lock(&mib->stats64_lock); + + stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast + + raw->rx_pause; + stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast + + raw->tx_pause; + + /* HW counters are counting bytes + FCS which is not acceptable + * for rtnl_link_stats64 interface + */ + stats->rx_bytes = raw->rx_total - stats->rx_packets * ETH_FCS_LEN; + stats->tx_bytes = raw->tx_total - stats->tx_packets * ETH_FCS_LEN; + + stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments + + raw->rx_oversize; + + stats->rx_crc_errors = raw->rx_crc_err; + stats->rx_frame_errors = raw->rx_align_err; + stats->rx_dropped = raw->rx_discards; + stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors + + stats->rx_frame_errors + stats->rx_dropped; + + stats->tx_window_errors = raw->tx_late_col; + stats->tx_fifo_errors = raw->tx_discards; + stats->tx_aborted_errors = raw->tx_exc_col; + stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors + + stats->tx_aborted_errors; + + stats->multicast = raw->rx_mcast; + stats->collisions = raw->tx_total_col; + + pstats->tx_pause_frames = raw->tx_pause; + pstats->rx_pause_frames = raw->rx_pause; + + spin_unlock(&mib->stats64_lock); + + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { + ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); + if (ret) + dev_err(dev->dev, "Failed to monitor transmission halt\n"); + } +} + +void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port) +{ + struct ethtool_pause_stats *pstats; + struct rtnl_link_stats64 *stats; + struct ksz88xx_stats_raw *raw; + struct ksz_port_mib *mib; + + mib = &dev->ports[port].mib; + stats = &mib->stats64; + pstats = &mib->pause_stats; + raw = (struct ksz88xx_stats_raw *)mib->counters; + + spin_lock(&mib->stats64_lock); + + stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast + + raw->rx_pause; + stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast + + raw->tx_pause; + + /* HW counters are counting bytes + FCS which is not acceptable + * for rtnl_link_stats64 interface + */ + stats->rx_bytes = raw->rx + raw->rx_hi - stats->rx_packets * ETH_FCS_LEN; + stats->tx_bytes = raw->tx + raw->tx_hi - stats->tx_packets * ETH_FCS_LEN; + + stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments + + raw->rx_oversize; + + stats->rx_crc_errors = raw->rx_crc_err; + stats->rx_frame_errors = raw->rx_align_err; + stats->rx_dropped = raw->rx_discards; + stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors + + stats->rx_frame_errors + stats->rx_dropped; + + stats->tx_window_errors = raw->tx_late_col; + stats->tx_fifo_errors = raw->tx_discards; + stats->tx_aborted_errors = raw->tx_exc_col; + stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors + + stats->tx_aborted_errors; + + stats->multicast = raw->rx_mcast; + stats->collisions = raw->tx_total_col; + + pstats->tx_pause_frames = raw->tx_pause; + pstats->rx_pause_frames = raw->rx_pause; + + spin_unlock(&mib->stats64_lock); +} + +static void ksz_get_stats64(struct dsa_switch *ds, int port, + struct rtnl_link_stats64 *s) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port_mib *mib; + + mib = &dev->ports[port].mib; + + spin_lock(&mib->stats64_lock); + memcpy(s, &mib->stats64, sizeof(*s)); + spin_unlock(&mib->stats64_lock); +} + +static void ksz_get_pause_stats(struct dsa_switch *ds, int port, + struct ethtool_pause_stats *pause_stats) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port_mib *mib; + + mib = &dev->ports[port].mib; + + spin_lock(&mib->stats64_lock); + memcpy(pause_stats, &mib->pause_stats, sizeof(*pause_stats)); + spin_unlock(&mib->stats64_lock); +} + +static void ksz_get_strings(struct dsa_switch *ds, int port, + u32 stringset, uint8_t *buf) +{ + struct ksz_device *dev = ds->priv; + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < dev->info->mib_cnt; i++) + ethtool_puts(&buf, dev->info->mib_names[i].string); +} + +/** + * ksz_update_port_member - Adjust port forwarding rules based on STP state and + * isolation settings. + * @dev: A pointer to the struct ksz_device representing the device. + * @port: The port number to adjust. + * + * This function dynamically adjusts the port membership configuration for a + * specified port and other device ports, based on Spanning Tree Protocol (STP) + * states and port isolation settings. Each port, including the CPU port, has a + * membership register, represented as a bitfield, where each bit corresponds + * to a port number. A set bit indicates permission to forward frames to that + * port. This function iterates over all ports, updating the membership register + * to reflect current forwarding permissions: + * + * 1. Forwards frames only to ports that are part of the same bridge group and + * in the BR_STATE_FORWARDING state. + * 2. Takes into account the isolation status of ports; ports in the + * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward + * frames to each other, even if they are in the same bridge group. + * 3. Ensures that the CPU port is included in the membership based on its + * upstream port configuration, allowing for management and control traffic + * to flow as required. + */ +static void ksz_update_port_member(struct ksz_device *dev, int port) +{ + struct ksz_port *p = &dev->ports[port]; + struct dsa_switch *ds = dev->ds; + u8 port_member = 0, cpu_port; + const struct dsa_port *dp; + int i, j; + + if (!dsa_is_user_port(ds, port)) + return; + + dp = dsa_to_port(ds, port); + cpu_port = BIT(dsa_upstream_port(ds, port)); + + for (i = 0; i < ds->num_ports; i++) { + const struct dsa_port *other_dp = dsa_to_port(ds, i); + struct ksz_port *other_p = &dev->ports[i]; + u8 val = 0; + + if (!dsa_is_user_port(ds, i)) + continue; + if (port == i) + continue; + if (!dsa_port_bridge_same(dp, other_dp)) + continue; + if (other_p->stp_state != BR_STATE_FORWARDING) + continue; + + /* At this point we know that "port" and "other" port [i] are in + * the same bridge group and that "other" port [i] is in + * forwarding stp state. If "port" is also in forwarding stp + * state, we can allow forwarding from port [port] to port [i]. + * Except if both ports are isolated. + */ + if (p->stp_state == BR_STATE_FORWARDING && + !(p->isolated && other_p->isolated)) { + val |= BIT(port); + port_member |= BIT(i); + } + + /* Retain port [i]'s relationship to other ports than [port] */ + for (j = 0; j < ds->num_ports; j++) { + const struct dsa_port *third_dp; + struct ksz_port *third_p; + + if (j == i) + continue; + if (j == port) + continue; + if (!dsa_is_user_port(ds, j)) + continue; + third_p = &dev->ports[j]; + if (third_p->stp_state != BR_STATE_FORWARDING) + continue; + + third_dp = dsa_to_port(ds, j); + + /* Now we updating relation of the "other" port [i] to + * the "third" port [j]. We already know that "other" + * port [i] is in forwarding stp state and that "third" + * port [j] is in forwarding stp state too. + * We need to check if "other" port [i] and "third" port + * [j] are in the same bridge group and not isolated + * before allowing forwarding from port [i] to port [j]. + */ + if (dsa_port_bridge_same(other_dp, third_dp) && + !(other_p->isolated && third_p->isolated)) + val |= BIT(j); + } + + dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); + } + + /* HSR ports are setup once so need to use the assigned membership + * when the port is enabled. + */ + if (!port_member && p->stp_state == BR_STATE_FORWARDING && + (dev->hsr_ports & BIT(port))) + port_member = dev->hsr_ports; + dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); +} + +static int ksz_sw_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + u16 val; + int ret; + + ret = dev->dev_ops->r_phy(dev, addr, regnum, &val); + if (ret < 0) + return ret; + + return val; +} + +static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct ksz_device *dev = bus->priv; + + return dev->dev_ops->w_phy(dev, addr, regnum, val); +} + +/** + * ksz_parent_mdio_read - Read data from a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to read. + * + * This function provides a direct read operation on the parent MDIO bus for + * accessing PHY registers. By bypassing SPI or I2C, it uses the parent MDIO bus + * to retrieve data from the PHY registers at the specified address and register + * number. + * + * Return: Value of the PHY register, or a negative error code on failure. + */ +static int ksz_parent_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_read_nested(dev->parent_mdio_bus, addr, regnum); +} + +/** + * ksz_parent_mdio_write - Write data to a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to write to. + * @val: Value to write to the PHY register. + * + * This function provides a direct write operation on the parent MDIO bus for + * accessing PHY registers. Bypassing SPI or I2C, it uses the parent MDIO bus + * to modify the PHY register values at the specified address. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parent_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_write_nested(dev->parent_mdio_bus, addr, regnum, val); +} + +/** + * ksz_phy_addr_to_port - Map a PHY address to the corresponding switch port. + * @dev: Pointer to device structure. + * @addr: PHY address to map to a port. + * + * This function finds the corresponding switch port for a given PHY address by + * iterating over all user ports on the device. It checks if a port's PHY + * address in `phy_addr_map` matches the specified address and if the port + * contains an internal PHY. If a match is found, the index of the port is + * returned. + * + * Return: Port index on success, or -EINVAL if no matching port is found. + */ +static int ksz_phy_addr_to_port(struct ksz_device *dev, int addr) +{ + struct dsa_switch *ds = dev->ds; + struct dsa_port *dp; + + dsa_switch_for_each_user_port(dp, ds) { + if (dev->info->internal_phy[dp->index] && + dev->phy_addr_map[dp->index] == addr) + return dp->index; + } + + return -EINVAL; +} + +/** + * ksz_irq_phy_setup - Configure IRQs for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Sets up IRQs for each active PHY connected to the KSZ switch by mapping the + * appropriate IRQs for each PHY and assigning them to the `user_mii_bus` in + * the DSA switch structure. Each IRQ is mapped based on the port's IRQ domain. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_irq_phy_setup(struct ksz_device *dev) +{ + struct dsa_switch *ds = dev->ds; + int phy, port; + int irq; + int ret; + + for (phy = 0; phy < PHY_MAX_ADDR; phy++) { + if (BIT(phy) & ds->phys_mii_mask) { + port = ksz_phy_addr_to_port(dev, phy); + if (port < 0) { + ret = port; + goto out; + } + + irq = irq_find_mapping(dev->ports[port].pirq.domain, + PORT_SRC_PHY_INT); + if (!irq) { + ret = -EINVAL; + goto out; + } + ds->user_mii_bus->irq[phy] = irq; + } + } + return 0; +out: + while (phy--) + if (BIT(phy) & ds->phys_mii_mask) + irq_dispose_mapping(ds->user_mii_bus->irq[phy]); + + return ret; +} + +/** + * ksz_irq_phy_free - Release IRQ mappings for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Releases any IRQ mappings previously assigned to active PHYs in the KSZ + * switch by disposing of each mapped IRQ in the `user_mii_bus` structure. + */ +static void ksz_irq_phy_free(struct ksz_device *dev) +{ + struct dsa_switch *ds = dev->ds; + int phy; + + for (phy = 0; phy < PHY_MAX_ADDR; phy++) + if (BIT(phy) & ds->phys_mii_mask) + irq_dispose_mapping(ds->user_mii_bus->irq[phy]); +} + +/** + * ksz_parse_dt_phy_config - Parse and validate PHY configuration from DT + * @dev: pointer to the KSZ device structure + * @bus: pointer to the MII bus structure + * @mdio_np: pointer to the MDIO node in the device tree + * + * This function parses and validates PHY configurations for each user port + * defined in the device tree for a KSZ switch device. It verifies that the + * `phy-handle` properties are correctly set and that the internal PHYs match + * expected addresses and parent nodes. Sets up the PHY mask in the MII bus if + * all validations pass. Logs error messages for any mismatches or missing data. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parse_dt_phy_config(struct ksz_device *dev, struct mii_bus *bus, + struct device_node *mdio_np) +{ + struct device_node *phy_node, *phy_parent_node; + bool phys_are_valid = true; + struct dsa_port *dp; + u32 phy_addr; + int ret; + + dsa_switch_for_each_user_port(dp, dev->ds) { + if (!dev->info->internal_phy[dp->index]) + continue; + + phy_node = of_parse_phandle(dp->dn, "phy-handle", 0); + if (!phy_node) { + dev_err(dev->dev, "failed to parse phy-handle for port %d.\n", + dp->index); + phys_are_valid = false; + continue; + } + + phy_parent_node = of_get_parent(phy_node); + if (!phy_parent_node) { + dev_err(dev->dev, "failed to get PHY-parent node for port %d\n", + dp->index); + phys_are_valid = false; + } else if (phy_parent_node != mdio_np) { + dev_err(dev->dev, "PHY-parent node mismatch for port %d, expected %pOF, got %pOF\n", + dp->index, mdio_np, phy_parent_node); + phys_are_valid = false; + } else { + ret = of_property_read_u32(phy_node, "reg", &phy_addr); + if (ret < 0) { + dev_err(dev->dev, "failed to read PHY address for port %d. Error %d\n", + dp->index, ret); + phys_are_valid = false; + } else if (phy_addr != dev->phy_addr_map[dp->index]) { + dev_err(dev->dev, "PHY address mismatch for port %d, expected 0x%x, got 0x%x\n", + dp->index, dev->phy_addr_map[dp->index], + phy_addr); + phys_are_valid = false; + } else { + bus->phy_mask |= BIT(phy_addr); + } + } + + of_node_put(phy_node); + of_node_put(phy_parent_node); + } + + if (!phys_are_valid) + return -EINVAL; + + return 0; +} + +/** + * ksz_mdio_register - Register and configure the MDIO bus for the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * This function sets up and registers an MDIO bus for the KSZ switch device, + * allowing access to its internal PHYs. If the device supports side MDIO, + * the function will configure the external MDIO controller specified by the + * "mdio-parent-bus" device tree property to directly manage internal PHYs. + * Otherwise, SPI or I2C access is set up for PHY access. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_mdio_register(struct ksz_device *dev) +{ + struct device_node *parent_bus_node; + struct mii_bus *parent_bus = NULL; + struct dsa_switch *ds = dev->ds; + struct device_node *mdio_np; + struct mii_bus *bus; + int ret, i; + + mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio"); + if (!mdio_np) + return 0; + + parent_bus_node = of_parse_phandle(mdio_np, "mdio-parent-bus", 0); + if (parent_bus_node && !dev->info->phy_side_mdio_supported) { + dev_err(dev->dev, "Side MDIO bus is not supported for this HW, ignoring 'mdio-parent-bus' property.\n"); + ret = -EINVAL; + + goto put_mdio_node; + } else if (parent_bus_node) { + parent_bus = of_mdio_find_bus(parent_bus_node); + if (!parent_bus) { + ret = -EPROBE_DEFER; + + goto put_mdio_node; + } + + dev->parent_mdio_bus = parent_bus; + } + + bus = devm_mdiobus_alloc(ds->dev); + if (!bus) { + ret = -ENOMEM; + goto put_mdio_node; + } + + if (dev->dev_ops->mdio_bus_preinit) { + ret = dev->dev_ops->mdio_bus_preinit(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } + + if (dev->dev_ops->create_phy_addr_map) { + ret = dev->dev_ops->create_phy_addr_map(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } else { + for (i = 0; i < dev->info->port_cnt; i++) + dev->phy_addr_map[i] = i; + } + + bus->priv = dev; + if (parent_bus) { + bus->read = ksz_parent_mdio_read; + bus->write = ksz_parent_mdio_write; + bus->name = "KSZ side MDIO"; + snprintf(bus->id, MII_BUS_ID_SIZE, "ksz-side-mdio-%d", + ds->index); + } else { + bus->read = ksz_sw_mdio_read; + bus->write = ksz_sw_mdio_write; + bus->name = "ksz user smi"; + if (ds->dst->index != 0) { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d-%d", ds->dst->index, ds->index); + } else { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + } + } + + ret = ksz_parse_dt_phy_config(dev, bus, mdio_np); + if (ret) + goto put_mdio_node; + + ds->phys_mii_mask = bus->phy_mask; + bus->parent = ds->dev; + + ds->user_mii_bus = bus; + + if (dev->irq > 0) { + ret = ksz_irq_phy_setup(dev); + if (ret) + goto put_mdio_node; + } + + ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np); + if (ret) { + dev_err(ds->dev, "unable to register MDIO bus %s\n", + bus->id); + if (dev->irq > 0) + ksz_irq_phy_free(dev); + } + +put_mdio_node: + of_node_put(mdio_np); + of_node_put(parent_bus_node); + + return ret; +} + +static void ksz_irq_mask(struct irq_data *d) +{ + struct ksz_irq *kirq = irq_data_get_irq_chip_data(d); + + kirq->masked |= BIT(d->hwirq); +} + +static void ksz_irq_unmask(struct irq_data *d) +{ + struct ksz_irq *kirq = irq_data_get_irq_chip_data(d); + + kirq->masked &= ~BIT(d->hwirq); +} + +static void ksz_irq_bus_lock(struct irq_data *d) +{ + struct ksz_irq *kirq = irq_data_get_irq_chip_data(d); + + mutex_lock(&kirq->dev->lock_irq); +} + +static void ksz_irq_bus_sync_unlock(struct irq_data *d) +{ + struct ksz_irq *kirq = irq_data_get_irq_chip_data(d); + struct ksz_device *dev = kirq->dev; + int ret; + + ret = ksz_write8(dev, kirq->reg_mask, kirq->masked); + if (ret) + dev_err(dev->dev, "failed to change IRQ mask\n"); + + mutex_unlock(&dev->lock_irq); +} + +static const struct irq_chip ksz_irq_chip = { + .name = "ksz-irq", + .irq_mask = ksz_irq_mask, + .irq_unmask = ksz_irq_unmask, + .irq_bus_lock = ksz_irq_bus_lock, + .irq_bus_sync_unlock = ksz_irq_bus_sync_unlock, +}; + +static int ksz_irq_domain_map(struct irq_domain *d, + unsigned int irq, irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, d->host_data); + irq_set_chip_and_handler(irq, &ksz_irq_chip, handle_level_irq); + irq_set_noprobe(irq); + + return 0; +} + +static const struct irq_domain_ops ksz_irq_domain_ops = { + .map = ksz_irq_domain_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void ksz_irq_free(struct ksz_irq *kirq) +{ + int irq, virq; + + free_irq(kirq->irq_num, kirq); + + for (irq = 0; irq < kirq->nirqs; irq++) { + virq = irq_find_mapping(kirq->domain, irq); + irq_dispose_mapping(virq); + } + + irq_domain_remove(kirq->domain); +} + +static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id) +{ + struct ksz_irq *kirq = dev_id; + unsigned int nhandled = 0; + struct ksz_device *dev; + unsigned int sub_irq; + u8 data; + int ret; + u8 n; + + dev = kirq->dev; + + /* Read interrupt status register */ + ret = ksz_read8(dev, kirq->reg_status, &data); + if (ret) + goto out; + + for (n = 0; n < kirq->nirqs; ++n) { + if (data & BIT(n)) { + sub_irq = irq_find_mapping(kirq->domain, n); + handle_nested_irq(sub_irq); + ++nhandled; + } + } +out: + return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); +} + +static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) +{ + int ret, n; + + kirq->dev = dev; + kirq->masked = ~0; + + kirq->domain = irq_domain_create_simple(dev_fwnode(dev->dev), kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); + if (!kirq->domain) + return -ENOMEM; + + for (n = 0; n < kirq->nirqs; n++) + irq_create_mapping(kirq->domain, n); + + ret = request_threaded_irq(kirq->irq_num, NULL, ksz_irq_thread_fn, + IRQF_ONESHOT, kirq->name, kirq); + if (ret) + goto out; + + return 0; + +out: + ksz_irq_free(kirq); + + return ret; +} + +static int ksz_girq_setup(struct ksz_device *dev) +{ + struct ksz_irq *girq = &dev->girq; + + girq->nirqs = dev->info->port_cnt; + girq->reg_mask = REG_SW_PORT_INT_MASK__1; + girq->reg_status = REG_SW_PORT_INT_STATUS__1; + snprintf(girq->name, sizeof(girq->name), "global_port_irq"); + + girq->irq_num = dev->irq; + + return ksz_irq_common_setup(dev, girq); +} + +static int ksz_pirq_setup(struct ksz_device *dev, u8 p) +{ + struct ksz_irq *pirq = &dev->ports[p].pirq; + + pirq->nirqs = dev->info->port_nirqs; + pirq->reg_mask = dev->dev_ops->get_port_addr(p, REG_PORT_INT_MASK); + pirq->reg_status = dev->dev_ops->get_port_addr(p, REG_PORT_INT_STATUS); + snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p); + + pirq->irq_num = irq_find_mapping(dev->girq.domain, p); + if (!pirq->irq_num) + return -EINVAL; + + return ksz_irq_common_setup(dev, pirq); +} + +static int ksz_parse_drive_strength(struct ksz_device *dev); + +static int ksz_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + u16 storm_mask, storm_rate; + struct dsa_port *dp; + struct ksz_port *p; + const u16 *regs; + int ret; + + regs = dev->info->regs; + + dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), + dev->info->num_vlans, GFP_KERNEL); + if (!dev->vlan_cache) + return -ENOMEM; + + ret = dev->dev_ops->reset(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + ret = ksz_parse_drive_strength(dev); + if (ret) + return ret; + + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + + /* set broadcast storm protection 10% rate */ + storm_mask = BROADCAST_STORM_RATE; + storm_rate = (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; + if (ksz_is_ksz8463(dev)) { + storm_mask = swab16(storm_mask); + storm_rate = swab16(storm_rate); + } + regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], + storm_mask, storm_rate); + + dev->dev_ops->config_cpu_port(ds); + + dev->dev_ops->enable_stp_addr(dev); + + ds->num_tx_queues = dev->info->num_tx_queues; + + regmap_update_bits(ksz_regmap_8(dev), regs[S_MULTICAST_CTRL], + MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE); + + ksz_init_mib_timer(dev); + + ds->configure_vlan_while_not_filtering = false; + ds->dscp_prio_mapping_is_global = true; + + if (dev->dev_ops->setup) { + ret = dev->dev_ops->setup(ds); + if (ret) + return ret; + } + + /* Start with learning disabled on standalone user ports, and enabled + * on the CPU port. In lack of other finer mechanisms, learning on the + * CPU port will avoid flooding bridge local addresses on the network + * in some cases. + */ + p = &dev->ports[dev->cpu_port]; + p->learning = true; + + if (dev->irq > 0) { + ret = ksz_girq_setup(dev); + if (ret) + return ret; + + dsa_switch_for_each_user_port(dp, dev->ds) { + ret = ksz_pirq_setup(dev, dp->index); + if (ret) + goto port_release; + + if (dev->info->ptp_capable) { + ret = ksz_ptp_irq_setup(ds, dp->index); + if (ret) + goto pirq_release; + } + } + } + + if (dev->info->ptp_capable) { + ret = ksz_ptp_clock_register(ds); + if (ret) { + dev_err(dev->dev, "Failed to register PTP clock: %d\n", + ret); + goto port_release; + } + } + + ret = ksz_mdio_register(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to register the mdio"); + goto out_ptp_clock_unregister; + } + + ret = ksz_dcb_init(dev); + if (ret) + goto out_ptp_clock_unregister; + + /* start switch */ + regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL], + SW_START, SW_START); + + return 0; + +out_ptp_clock_unregister: + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); +port_release: + if (dev->irq > 0) { + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); +pirq_release: + ksz_irq_free(&dev->ports[dp->index].pirq); + } + ksz_irq_free(&dev->girq); + } + + return ret; +} + +static void ksz_teardown(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct dsa_port *dp; + + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); + + if (dev->irq > 0) { + dsa_switch_for_each_user_port(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); + + ksz_irq_free(&dev->ports[dp->index].pirq); + } + + ksz_irq_free(&dev->girq); + } + + if (dev->dev_ops->teardown) + dev->dev_ops->teardown(ds); +} + +static void port_r_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + u64 *dropped; + + /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->reg_mib_cnt) { + dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, + &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + + /* last one in storage */ + dropped = &mib->counters[dev->info->mib_cnt]; + + /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->mib_cnt) { + dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, + dropped, &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + mib->cnt_ptr = 0; +} + +static void ksz_mib_read_work(struct work_struct *work) +{ + struct ksz_device *dev = container_of(work, struct ksz_device, + mib_read.work); + struct ksz_port_mib *mib; + struct ksz_port *p; + int i; + + for (i = 0; i < dev->info->port_cnt; i++) { + if (dsa_is_unused_port(dev->ds, i)) + continue; + + p = &dev->ports[i]; + mib = &p->mib; + mutex_lock(&mib->cnt_mutex); + + /* Only read MIB counters when the port is told to do. + * If not, read only dropped counters when link is not up. + */ + if (!p->read) { + const struct dsa_port *dp = dsa_to_port(dev->ds, i); + + if (!netif_carrier_ok(dp->user)) + mib->cnt_ptr = dev->info->reg_mib_cnt; + } + port_r_cnt(dev, i); + p->read = false; + + if (dev->dev_ops->r_mib_stat64) + dev->dev_ops->r_mib_stat64(dev, i); + + mutex_unlock(&mib->cnt_mutex); + } + + schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); +} + +void ksz_init_mib_timer(struct ksz_device *dev) +{ + int i; + + INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work); + + for (i = 0; i < dev->info->port_cnt; i++) { + struct ksz_port_mib *mib = &dev->ports[i].mib; + + dev->dev_ops->port_init_cnt(dev, i); + + mib->cnt_ptr = 0; + memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64)); + } +} + +static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct ksz_device *dev = ds->priv; + u16 val = 0xffff; + int ret; + + ret = dev->dev_ops->r_phy(dev, addr, reg, &val); + if (ret) + return ret; + + return val; +} + +static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) +{ + struct ksz_device *dev = ds->priv; + int ret; + + ret = dev->dev_ops->w_phy(dev, addr, reg, val); + if (ret) + return ret; + + return 0; +} + +static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ88X3_CHIP_ID: + /* Silicon Errata Sheet (DS80000830A): + * Port 1 does not work with LinkMD Cable-Testing. + * Port 1 does not respond to received PAUSE control frames. + */ + if (!port) + return MICREL_KSZ8_P1_ERRATA; + break; + } + + return 0; +} + +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + + /* Read all MIB counters when the link is going down. */ + dev->ports[dp->index].read = true; + /* timer started */ + if (dev->mib_read_interval) + schedule_delayed_work(&dev->mib_read, 0); +} + +static int ksz_sset_count(struct dsa_switch *ds, int port, int sset) +{ + struct ksz_device *dev = ds->priv; + + if (sset != ETH_SS_STATS) + return 0; + + return dev->info->mib_cnt; +} + +static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *buf) +{ + const struct dsa_port *dp = dsa_to_port(ds, port); + struct ksz_device *dev = ds->priv; + struct ksz_port_mib *mib; + + mib = &dev->ports[port].mib; + mutex_lock(&mib->cnt_mutex); + + /* Only read dropped counters if no link. */ + if (!netif_carrier_ok(dp->user)) + mib->cnt_ptr = dev->info->reg_mib_cnt; + port_r_cnt(dev, port); + memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64)); + mutex_unlock(&mib->cnt_mutex); +} + +static int ksz_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + /* port_stp_state_set() will be called after to put the port in + * appropriate state so there is no need to do anything. + */ + + return 0; +} + +static void ksz_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + /* port_stp_state_set() will be called after to put the port in + * forwarding state so there is no need to do anything. + */ +} + +static void ksz_port_fast_age(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + dev->dev_ops->flush_dyn_mac_table(dev, port); +} + +static int ksz_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->set_ageing_time) + return -EOPNOTSUPP; + + return dev->dev_ops->set_ageing_time(dev, msecs); +} + +static int ksz_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->fdb_add) + return -EOPNOTSUPP; + + return dev->dev_ops->fdb_add(dev, port, addr, vid, db); +} + +static int ksz_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, + u16 vid, struct dsa_db db) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->fdb_del) + return -EOPNOTSUPP; + + return dev->dev_ops->fdb_del(dev, port, addr, vid, db); +} + +static int ksz_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->fdb_dump) + return -EOPNOTSUPP; + + return dev->dev_ops->fdb_dump(dev, port, cb, data); +} + +static int ksz_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->mdb_add) + return -EOPNOTSUPP; + + return dev->dev_ops->mdb_add(dev, port, mdb, db); +} + +static int ksz_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->mdb_del) + return -EOPNOTSUPP; + + return dev->dev_ops->mdb_del(dev, port, mdb, db); +} + +static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev, + int port) +{ + u32 queue_map = 0; + int ipm; + + for (ipm = 0; ipm < dev->info->num_ipms; ipm++) { + int queue; + + /* Traffic Type (TT) is corresponding to the Internal Priority + * Map (IPM) in the switch. Traffic Class (TC) is + * corresponding to the queue in the switch. + */ + queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues); + if (queue < 0) + return queue; + + queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S); + } + + return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); +} + +static int ksz_port_setup(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + int ret; + + if (!dsa_is_user_port(ds, port)) + return 0; + + /* setup user port */ + dev->dev_ops->port_setup(dev, port, false); + + if (!is_ksz8(dev)) { + ret = ksz9477_set_default_prio_queue_mapping(dev, port); + if (ret) + return ret; + } + + /* port_stp_state_set() will be called after to enable the port so + * there is no need to do anything. + */ + + return ksz_dcb_init_port(dev, port); +} + +void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + const u16 *regs; + u8 data; + + regs = dev->info->regs; + + ksz_pread8(dev, port, regs[P_STP_CTRL], &data); + data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); + + p = &dev->ports[port]; + + switch (state) { + case BR_STATE_DISABLED: + data |= PORT_LEARN_DISABLE; + break; + case BR_STATE_LISTENING: + data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); + break; + case BR_STATE_LEARNING: + data |= PORT_RX_ENABLE; + if (!p->learning) + data |= PORT_LEARN_DISABLE; + break; + case BR_STATE_FORWARDING: + data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); + if (!p->learning) + data |= PORT_LEARN_DISABLE; + break; + case BR_STATE_BLOCKING: + data |= PORT_LEARN_DISABLE; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + ksz_pwrite8(dev, port, regs[P_STP_CTRL], data); + + p->stp_state = state; + + ksz_update_port_member(dev, port); +} + +static void ksz_port_teardown(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + if (dsa_is_user_port(ds, port)) + ksz9477_port_acl_free(dev, port); + } +} + +static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~(BR_LEARNING | BR_ISOLATED)) + return -EINVAL; + + return 0; +} + +static int ksz_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p = &dev->ports[port]; + + if (flags.mask & (BR_LEARNING | BR_ISOLATED)) { + if (flags.mask & BR_LEARNING) + p->learning = !!(flags.val & BR_LEARNING); + + if (flags.mask & BR_ISOLATED) + p->isolated = !!(flags.val & BR_ISOLATED); + + /* Make the change take effect immediately */ + ksz_port_stp_state_set(ds, port, p->stp_state); + } + + return 0; +} + +static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + struct ksz_device *dev = ds->priv; + enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE; + + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) + proto = DSA_TAG_PROTO_KSZ8795; + + if (dev->chip_id == KSZ88X3_CHIP_ID || + dev->chip_id == KSZ8463_CHIP_ID || + dev->chip_id == KSZ8563_CHIP_ID || + dev->chip_id == KSZ9893_CHIP_ID || + dev->chip_id == KSZ9563_CHIP_ID) + proto = DSA_TAG_PROTO_KSZ9893; + + if (dev->chip_id == KSZ8567_CHIP_ID || + dev->chip_id == KSZ9477_CHIP_ID || + dev->chip_id == KSZ9896_CHIP_ID || + dev->chip_id == KSZ9897_CHIP_ID || + dev->chip_id == KSZ9567_CHIP_ID || + dev->chip_id == LAN9646_CHIP_ID) + proto = DSA_TAG_PROTO_KSZ9477; + + if (is_lan937x(dev)) + proto = DSA_TAG_PROTO_LAN937X; + + return proto; +} + +static int ksz_connect_tag_protocol(struct dsa_switch *ds, + enum dsa_tag_protocol proto) +{ + struct ksz_tagger_data *tagger_data; + + switch (proto) { + case DSA_TAG_PROTO_KSZ8795: + return 0; + case DSA_TAG_PROTO_KSZ9893: + case DSA_TAG_PROTO_KSZ9477: + case DSA_TAG_PROTO_LAN937X: + tagger_data = ksz_tagger_data(ds); + tagger_data->xmit_work_fn = ksz_port_deferred_xmit; + return 0; + default: + return -EPROTONOSUPPORT; + } +} + +static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, + bool flag, struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->vlan_filtering) + return -EOPNOTSUPP; + + return dev->dev_ops->vlan_filtering(dev, port, flag, extack); +} + +static int ksz_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->vlan_add) + return -EOPNOTSUPP; + + return dev->dev_ops->vlan_add(dev, port, vlan, extack); +} + +static int ksz_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->vlan_del) + return -EOPNOTSUPP; + + return dev->dev_ops->vlan_del(dev, port, vlan); +} + +static int ksz_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->mirror_add) + return -EOPNOTSUPP; + + return dev->dev_ops->mirror_add(dev, port, mirror, ingress, extack); +} + +static void ksz_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct ksz_device *dev = ds->priv; + + if (dev->dev_ops->mirror_del) + dev->dev_ops->mirror_del(dev, port, mirror); +} + +static int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->dev_ops->change_mtu) + return -EOPNOTSUPP; + + return dev->dev_ops->change_mtu(dev, port, mtu); +} + +static int ksz_max_mtu(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8795_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8765_CHIP_ID: + return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; + case KSZ8463_CHIP_ID: + case KSZ88X3_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: + return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9370_CHIP_ID: + case LAN9371_CHIP_ID: + case LAN9372_CHIP_ID: + case LAN9373_CHIP_ID: + case LAN9374_CHIP_ID: + case LAN9646_CHIP_ID: + return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; + } + + return -EOPNOTSUPP; +} + +/** + * ksz_support_eee - Determine Energy Efficient Ethernet (EEE) support for a + * port + * @ds: Pointer to the DSA switch structure + * @port: Port number to check + * + * This function also documents devices where EEE was initially advertised but + * later withdrawn due to reliability issues, as described in official errata + * documents. These devices are explicitly listed to record known limitations, + * even if there is no technical necessity for runtime checks. + * + * Returns: true if the internal PHY on the given port supports fully + * operational EEE, false otherwise. + */ +static bool ksz_support_eee(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + if (!dev->info->internal_phy[port]) + return false; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9893_CHIP_ID: + return true; + case KSZ8567_CHIP_ID: + /* KSZ8567R Errata DS80000752C Module 4 */ + case KSZ8765_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8795_CHIP_ID: + /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ + case KSZ9477_CHIP_ID: + /* KSZ9477S Errata DS80000754A Module 4 */ + case KSZ9567_CHIP_ID: + /* KSZ9567S Errata DS80000756A Module 4 */ + case KSZ9896_CHIP_ID: + /* KSZ9896C Errata DS80000757A Module 3 */ + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + /* KSZ9897R Errata DS80000758C Module 4 */ + /* Energy Efficient Ethernet (EEE) feature select must be + * manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + * + * The same item appears in the errata for all switches above. + */ + break; + } + + return false; +} + +static int ksz_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_keee *e) +{ + struct ksz_device *dev = ds->priv; + + if (!e->tx_lpi_enabled) { + dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); + return -EINVAL; + } + + if (e->tx_lpi_timer) { + dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + return 0; +} + +static void ksz_set_xmii(struct ksz_device *dev, int port, + phy_interface_t interface) +{ + const u8 *bitval = dev->info->xmii_ctrl1; + struct ksz_port *p = &dev->ports[port]; + const u16 *regs = dev->info->regs; + u8 data8; + + ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8); + + data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE | + P_RGMII_ID_EG_ENABLE); + + switch (interface) { + case PHY_INTERFACE_MODE_MII: + data8 |= bitval[P_MII_SEL]; + break; + case PHY_INTERFACE_MODE_RMII: + data8 |= bitval[P_RMII_SEL]; + break; + case PHY_INTERFACE_MODE_GMII: + data8 |= bitval[P_GMII_SEL]; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + data8 |= bitval[P_RGMII_SEL]; + /* On KSZ9893, disable RGMII in-band status support */ + if (dev->chip_id == KSZ9893_CHIP_ID || + dev->chip_id == KSZ8563_CHIP_ID || + dev->chip_id == KSZ9563_CHIP_ID || + is_lan937x(dev)) + data8 &= ~P_MII_MAC_MODE; + break; + default: + dev_err(dev->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(interface), port); + return; + } + + if (p->rgmii_tx_val) + data8 |= P_RGMII_ID_EG_ENABLE; + + if (p->rgmii_rx_val) + data8 |= P_RGMII_ID_IG_ENABLE; + + /* Write the updated value */ + ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8); +} + +phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) +{ + const u8 *bitval = dev->info->xmii_ctrl1; + const u16 *regs = dev->info->regs; + phy_interface_t interface; + u8 data8; + u8 val; + + ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8); + + val = FIELD_GET(P_MII_SEL_M, data8); + + if (val == bitval[P_MII_SEL]) { + if (gbit) + interface = PHY_INTERFACE_MODE_GMII; + else + interface = PHY_INTERFACE_MODE_MII; + } else if (val == bitval[P_RMII_SEL]) { + interface = PHY_INTERFACE_MODE_RMII; + } else { + interface = PHY_INTERFACE_MODE_RGMII; + if (data8 & P_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_TXID; + if (data8 & P_RGMII_ID_IG_ENABLE) { + interface = PHY_INTERFACE_MODE_RGMII_RXID; + if (data8 & P_RGMII_ID_EG_ENABLE) + interface = PHY_INTERFACE_MODE_RGMII_ID; + } + } + + return interface; +} + +static void ksz88x3_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + + dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN); +} + +static void ksz_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; + + /* Internal PHYs */ + if (dev->info->internal_phy[port]) + return; + + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + + if (phylink_autoneg_inband(mode)) { + dev_err(dev->dev, "In-band AN not supported!\n"); + return; + } + + ksz_set_xmii(dev, port, state->interface); + + if (dev->dev_ops->setup_rgmii_delay) + dev->dev_ops->setup_rgmii_delay(dev, port); +} + +bool ksz_get_gbit(struct ksz_device *dev, int port) +{ + const u8 *bitval = dev->info->xmii_ctrl1; + const u16 *regs = dev->info->regs; + bool gbit = false; + u8 data8; + bool val; + + ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8); + + val = FIELD_GET(P_GMII_1GBIT_M, data8); + + if (val == bitval[P_GMII_1GBIT]) + gbit = true; + + return gbit; +} + +static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit) +{ + const u8 *bitval = dev->info->xmii_ctrl1; + const u16 *regs = dev->info->regs; + u8 data8; + + ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8); + + data8 &= ~P_GMII_1GBIT_M; + + if (gbit) + data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]); + else + data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]); + + /* Write the updated value */ + ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8); +} + +static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed) +{ + const u8 *bitval = dev->info->xmii_ctrl0; + const u16 *regs = dev->info->regs; + u8 data8; + + ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8); + + data8 &= ~P_MII_100MBIT_M; + + if (speed == SPEED_100) + data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]); + else + data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]); + + /* Write the updated value */ + ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8); +} + +static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed) +{ + if (speed == SPEED_1000) + ksz_set_gbit(dev, port, true); + else + ksz_set_gbit(dev, port, false); + + if (speed == SPEED_100 || speed == SPEED_10) + ksz_set_100_10mbit(dev, port, speed); +} + +static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex, + bool tx_pause, bool rx_pause) +{ + const u8 *bitval = dev->info->xmii_ctrl0; + const u32 *masks = dev->info->masks; + const u16 *regs = dev->info->regs; + u8 mask; + u8 val; + + mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] | + masks[P_MII_RX_FLOW_CTRL]; + + if (duplex == DUPLEX_FULL) + val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]); + else + val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]); + + if (tx_pause) + val |= masks[P_MII_TX_FLOW_CTRL]; + + if (rx_pause) + val |= masks[P_MII_RX_FLOW_CTRL]; + + ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val); +} + +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, bool tx_pause, + bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; + struct ksz_port *p; + + p = &dev->ports[port]; + + /* Internal PHYs */ + if (dev->info->internal_phy[port]) + return; + + p->phydev.speed = speed; + + ksz_port_set_xmii_speed(dev, port, speed); + + ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause); +} + +static int ksz_switch_detect(struct ksz_device *dev) +{ + u8 id1, id2, id4; + u16 id16; + u32 id32; + int ret; + + /* read chip id */ + ret = ksz_read16(dev, REG_CHIP_ID0, &id16); + if (ret) + return ret; + + id1 = FIELD_GET(SW_FAMILY_ID_M, id16); + id2 = FIELD_GET(SW_CHIP_ID_M, id16); + + switch (id1) { + case KSZ84_FAMILY_ID: + dev->chip_id = KSZ8463_CHIP_ID; + break; + case KSZ87_FAMILY_ID: + if (id2 == KSZ87_CHIP_ID_95) { + u8 val; + + dev->chip_id = KSZ8795_CHIP_ID; + + ksz_read8(dev, KSZ8_PORT_STATUS_0, &val); + if (val & KSZ8_PORT_FIBER_MODE) + dev->chip_id = KSZ8765_CHIP_ID; + } else if (id2 == KSZ87_CHIP_ID_94) { + dev->chip_id = KSZ8794_CHIP_ID; + } else { + return -ENODEV; + } + break; + case KSZ88_FAMILY_ID: + if (id2 == KSZ88_CHIP_ID_63) + dev->chip_id = KSZ88X3_CHIP_ID; + else + return -ENODEV; + break; + case KSZ8895_FAMILY_ID: + if (id2 == KSZ8895_CHIP_ID_95 || + id2 == KSZ8895_CHIP_ID_95R) + dev->chip_id = KSZ8895_CHIP_ID; + else + return -ENODEV; + ret = ksz_read8(dev, REG_KSZ8864_CHIP_ID, &id4); + if (ret) + return ret; + if (id4 & SW_KSZ8864) + dev->chip_id = KSZ8864_CHIP_ID; + break; + default: + ret = ksz_read32(dev, REG_CHIP_ID0, &id32); + if (ret) + return ret; + + dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32); + id32 &= ~0xFF; + + switch (id32) { + case KSZ9477_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ8567_CHIP_ID: + case LAN9370_CHIP_ID: + case LAN9371_CHIP_ID: + case LAN9372_CHIP_ID: + case LAN9373_CHIP_ID: + case LAN9374_CHIP_ID: + + /* LAN9646 does not have its own chip id. */ + if (dev->chip_id != LAN9646_CHIP_ID) + dev->chip_id = id32; + break; + case KSZ9893_CHIP_ID: + ret = ksz_read8(dev, REG_CHIP_ID4, + &id4); + if (ret) + return ret; + + if (id4 == SKU_ID_KSZ8563) + dev->chip_id = KSZ8563_CHIP_ID; + else if (id4 == SKU_ID_KSZ9563) + dev->chip_id = KSZ9563_CHIP_ID; + else + dev->chip_id = KSZ9893_CHIP_ID; + + break; + default: + dev_err(dev->dev, + "unsupported switch detected %x)\n", id32); + return -ENODEV; + } + } + return 0; +} + +static int ksz_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_cls_flower_add(ds, port, cls, ingress); + } + + return -EOPNOTSUPP; +} + +static int ksz_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_cls_flower_del(ds, port, cls, ingress); + } + + return -EOPNOTSUPP; +} + +/* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth + * is converted to Hex-decimal using the successive multiplication method. On + * every step, integer part is taken and decimal part is carry forwarded. + */ +static int cinc_cal(s32 idle_slope, s32 send_slope, u32 *bw) +{ + u32 cinc = 0; + u32 txrate; + u32 rate; + u8 temp; + u8 i; + + txrate = idle_slope - send_slope; + + if (!txrate) + return -EINVAL; + + rate = idle_slope; + + /* 24 bit register */ + for (i = 0; i < 6; i++) { + rate = rate * 16; + + temp = rate / txrate; + + rate %= txrate; + + cinc = ((cinc << 4) | temp); + } + + *bw = cinc; + + return 0; +} + +static int ksz_setup_tc_mode(struct ksz_device *dev, int port, u8 scheduler, + u8 shaper) +{ + return ksz_pwrite8(dev, port, REG_PORT_MTI_QUEUE_CTRL_0, + FIELD_PREP(MTI_SCHEDULE_MODE_M, scheduler) | + FIELD_PREP(MTI_SHAPING_M, shaper)); +} + +static int ksz_setup_tc_cbs(struct dsa_switch *ds, int port, + struct tc_cbs_qopt_offload *qopt) +{ + struct ksz_device *dev = ds->priv; + int ret; + u32 bw; + + if (!dev->info->tc_cbs_supported) + return -EOPNOTSUPP; + + if (qopt->queue > dev->info->num_tx_queues) + return -EINVAL; + + /* Queue Selection */ + ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, qopt->queue); + if (ret) + return ret; + + if (!qopt->enable) + return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR, + MTI_SHAPING_OFF); + + /* High Credit */ + ret = ksz_pwrite16(dev, port, REG_PORT_MTI_HI_WATER_MARK, + qopt->hicredit); + if (ret) + return ret; + + /* Low Credit */ + ret = ksz_pwrite16(dev, port, REG_PORT_MTI_LO_WATER_MARK, + qopt->locredit); + if (ret) + return ret; + + /* Credit Increment Register */ + ret = cinc_cal(qopt->idleslope, qopt->sendslope, &bw); + if (ret) + return ret; + + if (dev->dev_ops->tc_cbs_set_cinc) { + ret = dev->dev_ops->tc_cbs_set_cinc(dev, port, bw); + if (ret) + return ret; + } + + return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO, + MTI_SHAPING_SRP); +} + +static int ksz_disable_egress_rate_limit(struct ksz_device *dev, int port) +{ + int queue, ret; + + /* Configuration will not take effect until the last Port Queue X + * Egress Limit Control Register is written. + */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + ret = ksz_pwrite8(dev, port, KSZ9477_REG_PORT_OUT_RATE_0 + queue, + KSZ9477_OUT_RATE_NO_LIMIT); + if (ret) + return ret; + } + + return 0; +} + +static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, + int band) +{ + /* Compared to queues, bands prioritize packets differently. In strict + * priority mode, the lowest priority is assigned to Queue 0 while the + * highest priority is given to Band 0. + */ + return p->bands - 1 - band; +} + +static u8 ksz8463_tc_ctrl(int port, int queue) +{ + u8 reg; + + reg = 0xC8 + port * 4; + reg += ((3 - queue) / 2) * 2; + reg++; + reg -= (queue & 1); + return reg; +} + +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + +static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) +{ + int ret; + + ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue); + if (ret) + return ret; + + return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO, + MTI_SHAPING_OFF); +} + +static int ksz_queue_set_wrr(struct ksz_device *dev, int port, int queue, + int weight) +{ + int ret; + + ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue); + if (ret) + return ret; + + ret = ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR, + MTI_SHAPING_OFF); + if (ret) + return ret; + + return ksz_pwrite8(dev, port, KSZ9477_PORT_MTI_QUEUE_CTRL_1, weight); +} + +static int ksz_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band, tc_prio; + u32 queue_map = 0; + + /* In order to ensure proper prioritization, it is necessary to set the + * rate limit for the related queue to zero. Otherwise strict priority + * or WRR mode will not work. This is a hardware limitation. + */ + ret = ksz_disable_egress_rate_limit(dev, port); + if (ret) + return ret; + + /* Configure queue scheduling mode for all bands. Currently only strict + * prio mode is supported. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + + ret = ksz_queue_set_strict(dev, port, queue); + if (ret) + return ret; + } + + /* Configure the mapping between traffic classes and queues. Note: + * priomap variable support 16 traffic classes, but the chip can handle + * only 8 classes. + */ + for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) { + int queue; + + if (tc_prio >= dev->info->num_ipms) + break; + + queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]); + queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S); + } + + return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); +} + +static int ksz_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* To restore the default chip configuration, set all queues to use the + * WRR scheduler with a weight of 1. + */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + ret = ksz_queue_set_wrr(dev, port, queue, + KSZ9477_DEFAULT_WRR_WEIGHT); + + if (ret) + return ret; + } + + /* Revert the queue mapping for TC-priority to its default setting on + * the chip. + */ + return ksz9477_set_default_prio_queue_mapping(dev, port); +} + +static int ksz_tc_ets_validate(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int band; + + /* Since it is not feasible to share one port among multiple qdisc, + * the user must configure all available queues appropriately. + */ + if (p->bands != dev->info->num_tx_queues) { + dev_err(dev->dev, "Not supported amount of bands. It should be %d\n", + dev->info->num_tx_queues); + return -EOPNOTSUPP; + } + + for (band = 0; band < p->bands; ++band) { + /* The KSZ switches utilize a weighted round robin configuration + * where a certain number of packets can be transmitted from a + * queue before the next queue is serviced. For more information + * on this, refer to section 5.2.8.4 of the KSZ8565R + * documentation on the Port Transmit Queue Control 1 Register. + * However, the current ETS Qdisc implementation (as of February + * 2023) assigns a weight to each queue based on the number of + * bytes or extrapolated bandwidth in percentages. Since this + * differs from the KSZ switches' method and we don't want to + * fake support by converting bytes to packets, it is better to + * return an error instead. + */ + if (p->quanta[band]) { + dev_err(dev->dev, "Quanta/weights configuration is not supported.\n"); + return -EOPNOTSUPP; + } + } + + return 0; +} + +static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, + struct tc_ets_qopt_offload *qopt) +{ + struct ksz_device *dev = ds->priv; + int ret; + + if (is_ksz8(dev) && !(ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))) + return -EOPNOTSUPP; + + if (qopt->parent != TC_H_ROOT) { + dev_err(dev->dev, "Parent should be \"root\"\n"); + return -EOPNOTSUPP; + } + + switch (qopt->command) { + case TC_ETS_REPLACE: + ret = ksz_tc_ets_validate(dev, port, &qopt->replace_params); + if (ret) + return ret; + + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); + case TC_ETS_DESTROY: + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); + case TC_ETS_STATS: + case TC_ETS_GRAFT: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + +static int ksz_setup_tc(struct dsa_switch *ds, int port, + enum tc_setup_type type, void *type_data) +{ + switch (type) { + case TC_SETUP_QDISC_CBS: + return ksz_setup_tc_cbs(ds, port, type_data); + case TC_SETUP_QDISC_ETS: + return ksz_tc_setup_qdisc_ets(ds, port, type_data); + default: + return -EOPNOTSUPP; + } +} + +/** + * ksz_handle_wake_reason - Handle wake reason on a specified port. + * @dev: The device structure. + * @port: The port number. + * + * This function reads the PME (Power Management Event) status register of a + * specified port to determine the wake reason. If there is no wake event, it + * returns early. Otherwise, it logs the wake reason which could be due to a + * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register + * is then cleared to acknowledge the handling of the wake event. + * + * Return: 0 on success, or an error code on failure. + */ +int ksz_handle_wake_reason(struct ksz_device *dev, int port) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_status; + int ret; + + ret = ops->pme_pread8(dev, port, regs[REG_PORT_PME_STATUS], + &pme_status); + if (ret) + return ret; + + if (!pme_status) + return 0; + + dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, + pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", + pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", + pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); + + return ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_STATUS], + pme_status); +} + +/** + * ksz_get_wol - Get Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function checks the device PME wakeup_source flag and chip_id. + * If enabled and supported, it sets the supported and active WoL + * flags. + */ +static void ksz_get_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + u8 pme_ctrl; + int ret; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + wol->supported = WAKE_PHY; + + /* Check if the current MAC address on this port can be set + * as global for WAKE_MAGIC support. The result may vary + * dynamically based on other ports configurations. + */ + if (ksz_is_port_mac_global_usable(dev->ds, port)) + wol->supported |= WAKE_MAGIC; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl); + if (ret) + return; + + if (pme_ctrl & PME_WOL_MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) + wol->wolopts |= WAKE_PHY; +} + +/** + * ksz_set_wol - Set Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function configures Wake-on-LAN (WoL) settings for a specified + * port. It validates the provided WoL options, checks if PME is + * enabled and supported, clears any previous wake reasons, and sets + * the Magic Packet flag in the port's PME control register if + * specified. + * + * Return: 0 on success, or other error codes on failure. + */ +static int ksz_set_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + u8 pme_ctrl = 0, pme_ctrl_old = 0; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + bool magic_switched_off; + bool magic_switched_on; + int ret; + + if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return -EOPNOTSUPP; + + if (!dev->wakeup_source) + return -EOPNOTSUPP; + + ret = ksz_handle_wake_reason(dev, port); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + pme_ctrl |= PME_WOL_MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl_old); + if (ret) + return ret; + + if (pme_ctrl_old == pme_ctrl) + return 0; + + magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && + !(pme_ctrl & PME_WOL_MAGICPKT); + magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && + (pme_ctrl & PME_WOL_MAGICPKT); + + /* To keep reference count of MAC address, we should do this + * operation only on change of WOL settings. + */ + if (magic_switched_on) { + ret = ksz_switch_macaddr_get(dev->ds, port, NULL); + if (ret) + return ret; + } else if (magic_switched_off) { + ksz_switch_macaddr_put(dev->ds); + } + + ret = dev->dev_ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], + pme_ctrl); + if (ret) { + if (magic_switched_on) + ksz_switch_macaddr_put(dev->ds); + return ret; + } + + return 0; +} + +/** + * ksz_wol_pre_shutdown - Prepares the switch device for shutdown while + * considering Wake-on-LAN (WoL) settings. + * @dev: The switch device structure. + * @wol_enabled: Pointer to a boolean which will be set to true if WoL is + * enabled on any port. + * + * This function prepares the switch device for a safe shutdown while taking + * into account the Wake-on-LAN (WoL) settings on the user ports. It updates + * the wol_enabled flag accordingly to reflect whether WoL is active on any + * port. + */ +static void ksz_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_pin_en = PME_ENABLE; + struct dsa_port *dp; + int ret; + + *wol_enabled = false; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + dsa_switch_for_each_user_port(dp, dev->ds) { + u8 pme_ctrl = 0; + + ret = ops->pme_pread8(dev, dp->index, + regs[REG_PORT_PME_CTRL], &pme_ctrl); + if (!ret && pme_ctrl) + *wol_enabled = true; + + /* make sure there are no pending wake events which would + * prevent the device from going to sleep/shutdown. + */ + ksz_handle_wake_reason(dev, dp->index); + } + + /* Now we are save to enable PME pin. */ + if (*wol_enabled) { + if (dev->pme_active_high) + pme_pin_en |= PME_POLARITY; + ops->pme_write8(dev, regs[REG_SW_PME_CTRL], pme_pin_en); + if (ksz_is_ksz87xx(dev)) + ksz_write8(dev, KSZ87XX_REG_INT_EN, KSZ87XX_INT_PME_MASK); + } +} + +static int ksz_port_set_mac_address(struct dsa_switch *ds, int port, + const unsigned char *addr) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct ethtool_wolinfo wol; + + if (dp->hsr_dev) { + dev_err(ds->dev, + "Cannot change MAC address on port %d with active HSR offload\n", + port); + return -EBUSY; + } + + /* Need to initialize variable as the code to fill in settings may + * not be executed. + */ + wol.wolopts = 0; + + ksz_get_wol(ds, dp->index, &wol); + if (wol.wolopts & WAKE_MAGIC) { + dev_err(ds->dev, + "Cannot change MAC address on port %d with active Wake on Magic Packet\n", + port); + return -EBUSY; + } + + return 0; +} + +/** + * ksz_is_port_mac_global_usable - Check if the MAC address on a given port + * can be used as a global address. + * @ds: Pointer to the DSA switch structure. + * @port: The port number on which the MAC address is to be checked. + * + * This function examines the MAC address set on the specified port and + * determines if it can be used as a global address for the switch. + * + * Return: true if the port's MAC address can be used as a global address, false + * otherwise. + */ +bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port) +{ + struct net_device *user = dsa_to_port(ds, port)->user; + const unsigned char *addr = user->dev_addr; + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (switch_macaddr && !ether_addr_equal(switch_macaddr->addr, addr)) + return false; + + return true; +} + +/** + * ksz_switch_macaddr_get - Program the switch's MAC address register. + * @ds: DSA switch instance. + * @port: Port number. + * @extack: Netlink extended acknowledgment. + * + * This function programs the switch's MAC address register with the MAC address + * of the requesting user port. This single address is used by the switch for + * multiple features like HSR self-address filtering and WoL. Other user ports + * can share ownership of this address as long as their MAC address is the same. + * The MAC addresses of user ports must not change while they have ownership of + * the switch MAC address. + * + * Return: 0 on success, or other error codes on failure. + */ +int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, + struct netlink_ext_ack *extack) +{ + struct net_device *user = dsa_to_port(ds, port)->user; + const unsigned char *addr = user->dev_addr; + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + int i, ret; + + /* Make sure concurrent MAC address changes are blocked */ + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (switch_macaddr) { + if (!ether_addr_equal(switch_macaddr->addr, addr)) { + NL_SET_ERR_MSG_FMT_MOD(extack, + "Switch already configured for MAC address %pM", + switch_macaddr->addr); + return -EBUSY; + } + + refcount_inc(&switch_macaddr->refcount); + return 0; + } + + switch_macaddr = kzalloc(sizeof(*switch_macaddr), GFP_KERNEL); + if (!switch_macaddr) + return -ENOMEM; + + ether_addr_copy(switch_macaddr->addr, addr); + refcount_set(&switch_macaddr->refcount, 1); + dev->switch_macaddr = switch_macaddr; + + /* Program the switch MAC address to hardware */ + for (i = 0; i < ETH_ALEN; i++) { + if (ksz_is_ksz8463(dev)) { + u16 addr16 = ((u16)addr[i] << 8) | addr[i + 1]; + + ret = ksz_write16(dev, regs[REG_SW_MAC_ADDR] + i, + addr16); + i++; + } else { + ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, + addr[i]); + } + if (ret) + goto macaddr_drop; + } + + return 0; + +macaddr_drop: + dev->switch_macaddr = NULL; + refcount_set(&switch_macaddr->refcount, 0); + kfree(switch_macaddr); + + return ret; +} + +void ksz_switch_macaddr_put(struct dsa_switch *ds) +{ + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + int i; + + /* Make sure concurrent MAC address changes are blocked */ + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (!refcount_dec_and_test(&switch_macaddr->refcount)) + return; + + for (i = 0; i < ETH_ALEN; i++) + ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, 0); + + dev->switch_macaddr = NULL; + kfree(switch_macaddr); +} + +static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr, + struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + enum hsr_version ver; + int ret; + + ret = hsr_get_version(hsr, &ver); + if (ret) + return ret; + + if (dev->chip_id != KSZ9477_CHIP_ID) { + NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload"); + return -EOPNOTSUPP; + } + + /* KSZ9477 can support HW offloading of only 1 HSR device */ + if (dev->hsr_dev && hsr != dev->hsr_dev) { + NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR"); + return -EOPNOTSUPP; + } + + /* KSZ9477 only supports HSR v0 and v1 */ + if (!(ver == HSR_V0 || ver == HSR_V1)) { + NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported"); + return -EOPNOTSUPP; + } + + /* KSZ9477 can only perform HSR offloading for up to two ports */ + if (hweight8(dev->hsr_ports) >= 2) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot offload more than two ports - using software HSR"); + return -EOPNOTSUPP; + } + + /* Self MAC address filtering, to avoid frames traversing + * the HSR ring more than once. + */ + ret = ksz_switch_macaddr_get(ds, port, extack); + if (ret) + return ret; + + ksz9477_hsr_join(ds, port, hsr); + dev->hsr_dev = hsr; + dev->hsr_ports |= BIT(port); + + return 0; +} + +static int ksz_hsr_leave(struct dsa_switch *ds, int port, + struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + + WARN_ON(dev->chip_id != KSZ9477_CHIP_ID); + + ksz9477_hsr_leave(ds, port, hsr); + dev->hsr_ports &= ~BIT(port); + if (!dev->hsr_ports) + dev->hsr_dev = NULL; + + ksz_switch_macaddr_put(ds); + + return 0; +} + +static int ksz_suspend(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + cancel_delayed_work_sync(&dev->mib_read); + return 0; +} + +static int ksz_resume(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + if (dev->mib_read_interval) + schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); + return 0; +} + +static const struct dsa_switch_ops ksz_switch_ops = { + .get_tag_protocol = ksz_get_tag_protocol, + .connect_tag_protocol = ksz_connect_tag_protocol, + .get_phy_flags = ksz_get_phy_flags, + .setup = ksz_setup, + .teardown = ksz_teardown, + .phy_read = ksz_phy_read16, + .phy_write = ksz_phy_write16, + .phylink_get_caps = ksz_phylink_get_caps, + .port_setup = ksz_port_setup, + .set_ageing_time = ksz_set_ageing_time, + .get_strings = ksz_get_strings, + .get_ethtool_stats = ksz_get_ethtool_stats, + .get_sset_count = ksz_sset_count, + .port_bridge_join = ksz_port_bridge_join, + .port_bridge_leave = ksz_port_bridge_leave, + .port_hsr_join = ksz_hsr_join, + .port_hsr_leave = ksz_hsr_leave, + .port_set_mac_address = ksz_port_set_mac_address, + .port_stp_state_set = ksz_port_stp_state_set, + .port_teardown = ksz_port_teardown, + .port_pre_bridge_flags = ksz_port_pre_bridge_flags, + .port_bridge_flags = ksz_port_bridge_flags, + .port_fast_age = ksz_port_fast_age, + .port_vlan_filtering = ksz_port_vlan_filtering, + .port_vlan_add = ksz_port_vlan_add, + .port_vlan_del = ksz_port_vlan_del, + .port_fdb_dump = ksz_port_fdb_dump, + .port_fdb_add = ksz_port_fdb_add, + .port_fdb_del = ksz_port_fdb_del, + .port_mdb_add = ksz_port_mdb_add, + .port_mdb_del = ksz_port_mdb_del, + .port_mirror_add = ksz_port_mirror_add, + .port_mirror_del = ksz_port_mirror_del, + .get_stats64 = ksz_get_stats64, + .get_pause_stats = ksz_get_pause_stats, + .port_change_mtu = ksz_change_mtu, + .port_max_mtu = ksz_max_mtu, + .get_wol = ksz_get_wol, + .set_wol = ksz_set_wol, + .suspend = ksz_suspend, + .resume = ksz_resume, + .get_ts_info = ksz_get_ts_info, + .port_hwtstamp_get = ksz_hwtstamp_get, + .port_hwtstamp_set = ksz_hwtstamp_set, + .port_txtstamp = ksz_port_txtstamp, + .port_rxtstamp = ksz_port_rxtstamp, + .cls_flower_add = ksz_cls_flower_add, + .cls_flower_del = ksz_cls_flower_del, + .port_setup_tc = ksz_setup_tc, + .support_eee = ksz_support_eee, + .set_mac_eee = ksz_set_mac_eee, + .port_get_default_prio = ksz_port_get_default_prio, + .port_set_default_prio = ksz_port_set_default_prio, + .port_get_dscp_prio = ksz_port_get_dscp_prio, + .port_add_dscp_prio = ksz_port_add_dscp_prio, + .port_del_dscp_prio = ksz_port_del_dscp_prio, + .port_get_apptrust = ksz_port_get_apptrust, + .port_set_apptrust = ksz_port_set_apptrust, +}; + +struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) +{ + struct dsa_switch *ds; + struct ksz_device *swdev; + + ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL); + if (!ds) + return NULL; + + ds->dev = base; + ds->num_ports = DSA_MAX_PORTS; + ds->ops = &ksz_switch_ops; + + swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL); + if (!swdev) + return NULL; + + ds->priv = swdev; + swdev->dev = base; + + swdev->ds = ds; + swdev->priv = priv; + + return swdev; +} +EXPORT_SYMBOL(ksz_switch_alloc); + +/** + * ksz_switch_shutdown - Shutdown routine for the switch device. + * @dev: The switch device structure. + * + * This function is responsible for initiating a shutdown sequence for the + * switch device. It invokes the reset operation defined in the device + * operations, if available, to reset the switch. Subsequently, it calls the + * DSA framework's shutdown function to ensure a proper shutdown of the DSA + * switch. + */ +void ksz_switch_shutdown(struct ksz_device *dev) +{ + bool wol_enabled = false; + + ksz_wol_pre_shutdown(dev, &wol_enabled); + + if (dev->dev_ops->reset && !wol_enabled) + dev->dev_ops->reset(dev); + + dsa_switch_shutdown(dev->ds); +} +EXPORT_SYMBOL(ksz_switch_shutdown); + +static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num, + struct device_node *port_dn) +{ + phy_interface_t phy_mode = dev->ports[port_num].interface; + int rx_delay = -1, tx_delay = -1; + + if (!phy_interface_mode_is_rgmii(phy_mode)) + return; + + of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay); + of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay); + + if (rx_delay == -1 && tx_delay == -1) { + dev_warn(dev->dev, + "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, " + "please update device tree to specify \"rx-internal-delay-ps\" and " + "\"tx-internal-delay-ps\"", + port_num); + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + rx_delay = 2000; + + if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + tx_delay = 2000; + } + + if (rx_delay < 0) + rx_delay = 0; + if (tx_delay < 0) + tx_delay = 0; + + dev->ports[port_num].rgmii_rx_val = rx_delay; + dev->ports[port_num].rgmii_tx_val = tx_delay; +} + +/** + * ksz_drive_strength_to_reg() - Convert drive strength value to corresponding + * register value. + * @array: The array of drive strength values to search. + * @array_size: The size of the array. + * @microamp: The drive strength value in microamp to be converted. + * + * This function searches the array of drive strength values for the given + * microamp value and returns the corresponding register value for that drive. + * + * Returns: If found, the corresponding register value for that drive strength + * is returned. Otherwise, -EINVAL is returned indicating an invalid value. + */ +static int ksz_drive_strength_to_reg(const struct ksz_drive_strength *array, + size_t array_size, int microamp) +{ + int i; + + for (i = 0; i < array_size; i++) { + if (array[i].microamp == microamp) + return array[i].reg_val; + } + + return -EINVAL; +} + +/** + * ksz_drive_strength_error() - Report invalid drive strength value + * @dev: ksz device + * @array: The array of drive strength values to search. + * @array_size: The size of the array. + * @microamp: Invalid drive strength value in microamp + * + * This function logs an error message when an unsupported drive strength value + * is detected. It lists out all the supported drive strength values for + * reference in the error message. + */ +static void ksz_drive_strength_error(struct ksz_device *dev, + const struct ksz_drive_strength *array, + size_t array_size, int microamp) +{ + char supported_values[100]; + size_t remaining_size; + int added_len; + char *ptr; + int i; + + remaining_size = sizeof(supported_values); + ptr = supported_values; + + for (i = 0; i < array_size; i++) { + added_len = snprintf(ptr, remaining_size, + i == 0 ? "%d" : ", %d", array[i].microamp); + + if (added_len >= remaining_size) + break; + + ptr += added_len; + remaining_size -= added_len; + } + + dev_err(dev->dev, "Invalid drive strength %d, supported values are %s\n", + microamp, supported_values); +} + +/** + * ksz9477_drive_strength_write() - Set the drive strength for specific KSZ9477 + * chip variants. + * @dev: ksz device + * @props: Array of drive strength properties to be applied + * @num_props: Number of properties in the array + * + * This function configures the drive strength for various KSZ9477 chip variants + * based on the provided properties. It handles chip-specific nuances and + * ensures only valid drive strengths are written to the respective chip. + * + * Return: 0 on successful configuration, a negative error code on failure. + */ +static int ksz9477_drive_strength_write(struct ksz_device *dev, + struct ksz_driver_strength_prop *props, + int num_props) +{ + size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths); + int i, ret, reg; + u8 mask = 0; + u8 val = 0; + + if (props[KSZ_DRIVER_STRENGTH_IO].value != -1) + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + props[KSZ_DRIVER_STRENGTH_IO].name); + + if (dev->chip_id == KSZ8795_CHIP_ID || + dev->chip_id == KSZ8794_CHIP_ID || + dev->chip_id == KSZ8765_CHIP_ID) + reg = KSZ8795_REG_SW_CTRL_20; + else + reg = KSZ9477_REG_SW_IO_STRENGTH; + + for (i = 0; i < num_props; i++) { + if (props[i].value == -1) + continue; + + ret = ksz_drive_strength_to_reg(ksz9477_drive_strengths, + array_size, props[i].value); + if (ret < 0) { + ksz_drive_strength_error(dev, ksz9477_drive_strengths, + array_size, props[i].value); + return ret; + } + + mask |= SW_DRIVE_STRENGTH_M << props[i].offset; + val |= ret << props[i].offset; + } + + return ksz_rmw8(dev, reg, mask, val); +} + +/** + * ksz88x3_drive_strength_write() - Set the drive strength configuration for + * KSZ8863 compatible chip variants. + * @dev: ksz device + * @props: Array of drive strength properties to be set + * @num_props: Number of properties in the array + * + * This function applies the specified drive strength settings to KSZ88X3 chip + * variants (KSZ8873, KSZ8863). + * It ensures the configurations align with what the chip variant supports and + * warns or errors out on unsupported settings. + * + * Return: 0 on success, error code otherwise + */ +static int ksz88x3_drive_strength_write(struct ksz_device *dev, + struct ksz_driver_strength_prop *props, + int num_props) +{ + size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths); + int microamp; + int i, ret; + + for (i = 0; i < num_props; i++) { + if (props[i].value == -1 || i == KSZ_DRIVER_STRENGTH_IO) + continue; + + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + props[i].name); + } + + microamp = props[KSZ_DRIVER_STRENGTH_IO].value; + ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size, + microamp); + if (ret < 0) { + ksz_drive_strength_error(dev, ksz88x3_drive_strengths, + array_size, microamp); + return ret; + } + + return ksz_rmw8(dev, KSZ8873_REG_GLOBAL_CTRL_12, + KSZ8873_DRIVE_STRENGTH_16MA, ret); +} + +/** + * ksz_parse_drive_strength() - Extract and apply drive strength configurations + * from device tree properties. + * @dev: ksz device + * + * This function reads the specified drive strength properties from the + * device tree, validates against the supported chip variants, and sets + * them accordingly. An error should be critical here, as the drive strength + * settings are crucial for EMI compliance. + * + * Return: 0 on success, error code otherwise + */ +static int ksz_parse_drive_strength(struct ksz_device *dev) +{ + struct ksz_driver_strength_prop of_props[] = { + [KSZ_DRIVER_STRENGTH_HI] = { + .name = "microchip,hi-drive-strength-microamp", + .offset = SW_HI_SPEED_DRIVE_STRENGTH_S, + .value = -1, + }, + [KSZ_DRIVER_STRENGTH_LO] = { + .name = "microchip,lo-drive-strength-microamp", + .offset = SW_LO_SPEED_DRIVE_STRENGTH_S, + .value = -1, + }, + [KSZ_DRIVER_STRENGTH_IO] = { + .name = "microchip,io-drive-strength-microamp", + .offset = 0, /* don't care */ + .value = -1, + }, + }; + struct device_node *np = dev->dev->of_node; + bool have_any_prop = false; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(of_props); i++) { + ret = of_property_read_u32(np, of_props[i].name, + &of_props[i].value); + if (ret && ret != -EINVAL) + dev_warn(dev->dev, "Failed to read %s\n", + of_props[i].name); + if (ret) + continue; + + have_any_prop = true; + } + + if (!have_any_prop) + return 0; + + switch (dev->chip_id) { + case KSZ88X3_CHIP_ID: + return ksz88x3_drive_strength_write(dev, of_props, + ARRAY_SIZE(of_props)); + case KSZ8795_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8765_CHIP_ID: + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_drive_strength_write(dev, of_props, + ARRAY_SIZE(of_props)); + default: + for (i = 0; i < ARRAY_SIZE(of_props); i++) { + if (of_props[i].value == -1) + continue; + + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + of_props[i].name); + } + } + + return 0; +} + +static int ksz8463_configure_straps_spi(struct ksz_device *dev) +{ + struct pinctrl *pinctrl; + struct gpio_desc *rxd0; + struct gpio_desc *rxd1; + + rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW); + if (IS_ERR(rxd0)) + return PTR_ERR(rxd0); + + rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH); + if (IS_ERR(rxd1)) + return PTR_ERR(rxd1); + + if (!rxd0 && !rxd1) + return 0; + + if ((rxd0 && !rxd1) || (rxd1 && !rxd0)) + return -EINVAL; + + pinctrl = devm_pinctrl_get_select(dev->dev, "reset"); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + + return 0; +} + +static int ksz8463_release_straps_spi(struct ksz_device *dev) +{ + return pinctrl_select_default_state(dev->dev); +} + +int ksz_switch_register(struct ksz_device *dev) +{ + const struct ksz_chip_data *info; + struct device_node *ports; + phy_interface_t interface; + unsigned int port_num; + int ret; + int i; + + dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(dev->reset_gpio)) + return PTR_ERR(dev->reset_gpio); + + if (dev->reset_gpio) { + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_configure_straps_spi(dev); + if (ret) + return ret; + } + + gpiod_set_value_cansleep(dev->reset_gpio, 1); + usleep_range(10000, 12000); + gpiod_set_value_cansleep(dev->reset_gpio, 0); + msleep(100); + + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_release_straps_spi(dev); + if (ret) + return ret; + } + } + + mutex_init(&dev->dev_mutex); + mutex_init(&dev->regmap_mutex); + mutex_init(&dev->alu_mutex); + mutex_init(&dev->vlan_mutex); + + ret = ksz_switch_detect(dev); + if (ret) + return ret; + + info = ksz_lookup_info(dev->chip_id); + if (!info) + return -ENODEV; + + /* Update the compatible info with the probed one */ + dev->info = info; + + dev_info(dev->dev, "found switch: %s, rev %i\n", + dev->info->dev_name, dev->chip_rev); + + ret = ksz_check_device_id(dev); + if (ret) + return ret; + + dev->dev_ops = dev->info->ops; + + ret = dev->dev_ops->init(dev); + if (ret) + return ret; + + dev->ports = devm_kzalloc(dev->dev, + dev->info->port_cnt * sizeof(struct ksz_port), + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + + for (i = 0; i < dev->info->port_cnt; i++) { + spin_lock_init(&dev->ports[i].mib.stats64_lock); + mutex_init(&dev->ports[i].mib.cnt_mutex); + dev->ports[i].mib.counters = + devm_kzalloc(dev->dev, + sizeof(u64) * (dev->info->mib_cnt + 1), + GFP_KERNEL); + if (!dev->ports[i].mib.counters) + return -ENOMEM; + + dev->ports[i].ksz_dev = dev; + dev->ports[i].num = i; + } + + /* set the real number of ports */ + dev->ds->num_ports = dev->info->port_cnt; + + /* set the phylink ops */ + dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops; + + /* Host port interface will be self detected, or specifically set in + * device tree. + */ + for (port_num = 0; port_num < dev->info->port_cnt; ++port_num) + dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA; + if (dev->dev->of_node) { + ret = of_get_phy_mode(dev->dev->of_node, &interface); + if (ret == 0) + dev->compat_interface = interface; + ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports"); + if (!ports) + ports = of_get_child_by_name(dev->dev->of_node, "ports"); + if (ports) { + for_each_available_child_of_node_scoped(ports, port) { + if (of_property_read_u32(port, "reg", + &port_num)) + continue; + if (!(dev->port_mask & BIT(port_num))) { + of_node_put(ports); + return -EINVAL; + } + of_get_phy_mode(port, + &dev->ports[port_num].interface); + + ksz_parse_rgmii_delay(dev, port_num, port); + dev->ports[port_num].fiber = + of_property_read_bool(port, + "micrel,fiber-mode"); + } + of_node_put(ports); + } + dev->synclko_125 = of_property_read_bool(dev->dev->of_node, + "microchip,synclko-125"); + dev->synclko_disable = of_property_read_bool(dev->dev->of_node, + "microchip,synclko-disable"); + if (dev->synclko_125 && dev->synclko_disable) { + dev_err(dev->dev, "inconsistent synclko settings\n"); + return -EINVAL; + } + + dev->wakeup_source = of_property_read_bool(dev->dev->of_node, + "wakeup-source"); + dev->pme_active_high = of_property_read_bool(dev->dev->of_node, + "microchip,pme-active-high"); + } + + ret = dsa_register_switch(dev->ds); + if (ret) { + dev->dev_ops->exit(dev); + return ret; + } + + /* Read MIB counters every 30 seconds to avoid overflow. */ + dev->mib_read_interval = msecs_to_jiffies(5000); + + /* Start the MIB timer. */ + schedule_delayed_work(&dev->mib_read, 0); + + return ret; +} +EXPORT_SYMBOL(ksz_switch_register); + +void ksz_switch_remove(struct ksz_device *dev) +{ + /* timer started */ + if (dev->mib_read_interval) { + dev->mib_read_interval = 0; + cancel_delayed_work_sync(&dev->mib_read); + } + + dev->dev_ops->exit(dev); + dsa_unregister_switch(dev->ds); + + if (dev->reset_gpio) + gpiod_set_value_cansleep(dev->reset_gpio, 1); + +} +EXPORT_SYMBOL(ksz_switch_remove); + +#ifdef CONFIG_PM_SLEEP +int ksz_switch_suspend(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_suspend(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_suspend); + +int ksz_switch_resume(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_resume(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_resume); +#endif + +MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); +MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); |