diff options
Diffstat (limited to 'drivers/net/dsa/microchip')
19 files changed, 2664 insertions, 813 deletions
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index c1b906c05a02..c71d3fd5dfeb 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -1,14 +1,18 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig NET_DSA_MICROCHIP_KSZ_COMMON - tristate "Microchip KSZ8795/KSZ9477/LAN937x series switch support" + tristate "Microchip KSZ8XXX/KSZ9XXX/LAN937X series switch support" depends on NET_DSA select NET_DSA_TAG_KSZ select NET_DSA_TAG_NONE select NET_IEEE8021Q_HELPERS select DCB + select PCS_XPCS help - This driver adds support for Microchip KSZ9477 series switch and - KSZ8795/KSZ88x3 switch chips. + This driver adds support for Microchip KSZ8, KSZ9 and + LAN937X series switch chips, being KSZ8863/8873, + KSZ8895/8864, KSZ8794/8795/8765, + KSZ9477/9897/9896/9567/8567, KSZ9893/9563/8563 and + LAN9370/9371/9372/9373/9374. config NET_DSA_MICROCHIP_KSZ9477_I2C tristate "KSZ series I2C connected switch driver" diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 1cfba1ec9355..9347cfb3d0b5 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -2,7 +2,7 @@ obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o ksz_switch-objs := ksz_common.o ksz_dcb.o ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o -ksz_switch-objs += ksz8795.o +ksz_switch-objs += ksz8.o ksz_switch-objs += lan937x_main.o ifdef CONFIG_NET_DSA_MICROCHIP_KSZ_PTP diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8.c index d27b9c36d73f..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -1,6 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Microchip KSZ8795 switch driver + * Microchip KSZ8XXX series switch driver + * + * It supports the following switches: + * - KSZ8463 + * - KSZ8863, KSZ8873 aka KSZ88X3 + * - KSZ8895, KSZ8864 aka KSZ8895 family + * - KSZ8794, KSZ8795, KSZ8765 aka KSZ87XX + * Note that it does NOT support: + * - KSZ8563, KSZ8567 - see KSZ9477 driver * * Copyright (C) 2017 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> @@ -23,21 +31,35 @@ #include <linux/phylink.h> #include "ksz_common.h" -#include "ksz8795_reg.h" +#include "ksz8_reg.h" #include "ksz8.h" static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } +/** + * ksz8_ind_write8 - EEE/ACL/PME indirect register write + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @data: The data to be written. + * + * This function performs an indirect register write for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) { const u16 *regs; @@ -58,6 +80,59 @@ static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) return ret; } +/** + * ksz8_ind_read8 - EEE/ACL/PME indirect register read + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @val: The value read. + * + * This function performs an indirect register read for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ +static int ksz8_ind_read8(struct ksz_device *dev, u8 table, u16 addr, u8 *val) +{ + const u16 *regs; + u16 ctrl_addr; + int ret = 0; + + regs = dev->info->regs; + + mutex_lock(&dev->alu_mutex); + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (!ret) + ret = ksz_read8(dev, regs[REG_IND_BYTE], val); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz8_pme_write8(struct ksz_device *dev, u32 reg, u8 value) +{ + return ksz8_ind_write8(dev, (u8)(reg >> 8), (u8)(reg), value); +} + +int ksz8_pme_pread8(struct ksz_device *dev, int port, int offset, u8 *data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_read8(dev, table, (u8)(offset), data); +} + +int ksz8_pme_pwrite8(struct ksz_device *dev, int port, int offset, u8 data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_write8(dev, table, (u8)(offset), data); +} + int ksz8_reset_switch(struct ksz_device *dev) { if (ksz_is_ksz88x3(dev)) { @@ -66,6 +141,11 @@ int ksz8_reset_switch(struct ksz_device *dev) KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true); ksz_cfg(dev, KSZ8863_REG_SW_RESET, KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false); + } else if (ksz_is_ksz8463(dev)) { + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, true); + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, false); } else { /* reset switch */ ksz_write8(dev, REG_POWER_MANAGEMENT_1, @@ -120,7 +200,10 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return ksz8795_change_mtu(dev, frame_size); - case KSZ8830_CHIP_ID: + case KSZ8463_CHIP_ID: + case KSZ88X3_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return ksz8863_change_mtu(dev, frame_size); } @@ -151,6 +234,11 @@ static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues) WEIGHTED_FAIR_QUEUE_ENABLE); if (ret) return ret; + } else if (ksz_is_ksz8463(dev)) { + mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN; + reg_4q = P1CR1; + reg_2q = P1CR1 + 1; } else { mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN; mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN; @@ -295,6 +383,9 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, addr -= dev->info->reg_mib_cnt; ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 : KSZ8863_MIB_PACKET_DROPPED_RX_0; + if (ksz_is_8895_family(dev) && + ctrl_addr == KSZ8863_MIB_PACKET_DROPPED_RX_0) + ctrl_addr = KSZ8895_MIB_PACKET_DROPPED_RX_0; ctrl_addr += port; ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); @@ -317,7 +408,7 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, u64 *dropped, u64 *cnt) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt); else ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt); @@ -325,7 +416,7 @@ void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) return; /* enable the port for flush/freeze function */ @@ -343,7 +434,8 @@ void ksz8_port_init_cnt(struct ksz_device *dev, int port) struct ksz_port_mib *mib = &dev->ports[port].mib; u64 *dropped; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { /* flush all enabled port MIB counters */ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); @@ -542,11 +634,11 @@ static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, shifts[STATIC_MAC_FWD_PORTS]; alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; - /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + /* KSZ8795/KSZ8895 family switches have STATIC_MAC_TABLE_USE_FID and * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the * static MAC table compared to doing write. */ - if (ksz_is_ksz87xx(dev)) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) data_hi >>= 1; alu->is_static = true; alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; @@ -1188,12 +1280,15 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member) { + int offset = P_MIRROR_CTRL; u8 data; - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); - data &= ~PORT_VLAN_MEMBERSHIP; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_pread8(dev, port, offset, &data); + data &= ~dev->port_mask; data |= (member & dev->port_mask); - ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); + ksz_pwrite8(dev, port, offset, data); } void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) @@ -1201,6 +1296,8 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) u8 learn[DSA_MAX_PORTS]; int first, index, cnt; const u16 *regs; + int reg = S_FLUSH_TABLE_CTRL; + int mask = SW_FLUSH_DYN_MAC_TABLE; regs = dev->info->regs; @@ -1218,7 +1315,11 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index] | PORT_LEARN_DISABLE); } - ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + if (ksz_is_ksz8463(dev)) { + reg = KSZ8463_FLUSH_TABLE_CTRL; + mask = KSZ8463_FLUSH_DYN_MAC_TABLE; + } + ksz_cfg(dev, reg, mask, true); for (index = first; index < cnt; index++) { if (!(learn[index] & PORT_LEARN_DISABLE)) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]); @@ -1357,7 +1458,7 @@ int ksz8_fdb_del(struct ksz_device *dev, int port, const unsigned char *addr, int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, struct netlink_ext_ack *extack) { - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* Discard packets with VID not enabled on the switch */ @@ -1373,9 +1474,12 @@ int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state) { - if (ksz_is_ksz88x3(dev)) { - ksz_cfg(dev, REG_SW_INSERT_SRC_PVID, - 0x03 << (4 - 2 * port), state); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { + int reg = REG_SW_INSERT_SRC_PVID; + + if (ksz_is_ksz8463(dev)) + reg = KSZ8463_REG_SW_CTRL_9; + ksz_cfg(dev, reg, 0x03 << (4 - 2 * port), state); } else { ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00); } @@ -1390,7 +1494,7 @@ int ksz8_port_vlan_add(struct ksz_device *dev, int port, u16 data, new_pvid = 0; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* If a VLAN is added with untagged flag different from the @@ -1459,7 +1563,7 @@ int ksz8_port_vlan_del(struct ksz_device *dev, int port, u16 data, pvid; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); @@ -1489,19 +1593,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress, struct netlink_ext_ack *extack) { + int offset = P_MIRROR_CTRL; + + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, true); dev->mirror_rx |= BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, true); dev->mirror_tx |= BIT(port); } - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_SNIFFER, false); /* configure mirror port */ if (dev->mirror_rx || dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, true); return 0; @@ -1510,20 +1618,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, void ksz8_port_mirror_del(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror) { + int offset = P_MIRROR_CTRL; u8 data; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (mirror->ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, false); dev->mirror_rx &= ~BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, false); dev->mirror_tx &= ~BIT(port); } - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + ksz_pread8(dev, port, offset, &data); if (!dev->mirror_rx && !dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, false); } @@ -1545,28 +1656,27 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) { + const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; const u32 *masks; - int queues; + int offset; u8 member; masks = dev->info->masks; /* enable broadcast storm limit */ - ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - - /* For KSZ88x3 enable only one queue by default, otherwise we won't - * be able to get rid of PCP prios on Port 2. - */ - if (ksz_is_ksz88x3(dev)) - queues = 1; - else - queues = dev->info->num_tx_queues; + offset = P_BCAST_STORM_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR1; + ksz_port_cfg(dev, port, offset, PORT_BROADCAST_STORM, true); - ksz8_port_queue_split(dev, port, queues); + ksz8_port_queue_split(dev, port, dev->info->num_tx_queues); /* replace priority */ - ksz_port_cfg(dev, port, P_802_1P_CTRL, + offset = P_802_1P_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_port_cfg(dev, port, offset, masks[PORT_802_1P_REMAPPING], false); if (cpu_port) @@ -1575,6 +1685,13 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) member = BIT(dsa_upstream_port(ds, port)); ksz8_cfg_port_member(dev, port, member); + + /* Disable all WoL options by default. Otherwise + * ksz_switch_macaddr_get/put logic will not work properly. + * CPU port 4 has no WoL functionality. + */ + if (ksz_is_ksz87xx(dev) && !cpu_port) + ksz8_pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], 0); } static void ksz88x3_config_rmii_clk(struct ksz_device *dev) @@ -1599,6 +1716,7 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) const u32 *masks; const u16 *regs; u8 remote; + u8 fiber_ports = 0; int i; masks = dev->info->masks; @@ -1617,7 +1735,8 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) for (i = 0; i < dev->phy_port_cnt; i++) { p = &dev->ports[i]; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote); if (remote & KSZ8_PORT_FIBER_MODE) p->fiber = 1; @@ -1628,6 +1747,32 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) else ksz_port_cfg(dev, i, regs[P_STP_CTRL], PORT_FORCE_FLOW_CTRL, false); + if (p->fiber) + fiber_ports |= (1 << i); + } + if (ksz_is_ksz8463(dev)) { + /* Setup fiber ports. */ + if (fiber_ports) { + fiber_ports &= 3; + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_CFG_CTRL, + fiber_ports << PORT_COPPER_MODE_S, + 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_DSP_CTRL_6, + COPPER_RECEIVE_ADJUSTMENT, 0); + } + + /* Turn off PTP function as the switch's proprietary way of + * handling timestamp is not supported in current Linux PTP + * stack implementation. + */ + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_MSG_CONF1, + PTP_ENABLE, 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_CLK_CTRL, + PTP_CLK_ENABLE, 0); } } @@ -1790,7 +1935,8 @@ int ksz8_enable_stp_addr(struct ksz_device *dev) int ksz8_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; - int i; + const u16 *regs = dev->info->regs; + int i, ret = 0; ds->mtu_enforcement_ingress = true; @@ -1808,28 +1954,45 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); - if (!ksz_is_ksz88x3(dev)) + if (!ksz_is_ksz88x3(dev) && !ksz_is_ksz8463(dev)) ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true); for (i = 0; i < (dev->info->num_vlans / 4); i++) ksz8_r_vlan_entries(dev, i); - return ksz8_handle_global_errata(ds); + /* Make sure PME (WoL) is not enabled. If requested, it will + * be enabled by ksz_wol_pre_shutdown(). Otherwise, some PMICs + * do not like PME events changes before shutdown. PME only + * available on KSZ87xx family. + */ + if (ksz_is_ksz87xx(dev)) { + ret = ksz8_pme_write8(dev, regs[REG_SW_PME_CTRL], 0); + if (!ret) + ret = ksz_rmw8(dev, REG_INT_ENABLE, INT_PME, 0); + } + + if (!ret) + return ksz8_handle_global_errata(ds); + else + return ret; } void ksz8_get_caps(struct ksz_device *dev, int port, @@ -1855,6 +2018,84 @@ u32 ksz8_get_port_addr(int port, int offset) return PORT_CTRL_ADDR(port, offset); } +u32 ksz8463_get_port_addr(int port, int offset) +{ + return offset + 0x18 * port; +} + +static u16 ksz8463_get_phy_addr(u16 phy, u16 reg, u16 offset) +{ + return offset + reg * 2 + phy * (P2MBCR - P1MBCR); +} + +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u16 sw_reg = 0; + u16 data = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + switch (reg) { + case MII_PHYSID1: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1IHR); + break; + case MII_PHYSID2: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1ILR); + break; + case MII_BMCR: + case MII_BMSR: + case MII_ADVERTISE: + case MII_LPA: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + case MII_TPISTATUS: + /* This register holds the PHY interrupt status for simulated + * Micrel KSZ PHY. + */ + data = 0x0505; + break; + default: + break; + } + if (sw_reg) { + ret = ksz_read16(dev, sw_reg, &data); + if (ret) + return ret; + } + *val = data; + + return 0; +} + +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u16 sw_reg = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + + /* No write to fiber port. */ + if (dev->ports[phy].fiber) + return 0; + switch (reg) { + case MII_BMCR: + case MII_ADVERTISE: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + default: + break; + } + if (sw_reg) { + ret = ksz_write16(dev, sw_reg, val); + if (ret) + return ret; + } + + return 0; +} + int ksz8_switch_init(struct ksz_device *dev) { dev->cpu_port = fls(dev->info->cpu_ports) - 1; diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h index ae43077e76c3..0f2cd1474b44 100644 --- a/drivers/net/dsa/microchip/ksz8.h +++ b/drivers/net/dsa/microchip/ksz8.h @@ -54,10 +54,17 @@ int ksz8_reset_switch(struct ksz_device *dev); int ksz8_switch_init(struct ksz_device *dev); void ksz8_switch_exit(struct ksz_device *dev); int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu); +int ksz8_pme_write8(struct ksz_device *dev, u32 reg, u8 value); +int ksz8_pme_pread8(struct ksz_device *dev, int port, int offset, u8 *data); +int ksz8_pme_pwrite8(struct ksz_device *dev, int port, int offset, u8 data); void ksz8_phylink_mac_link_up(struct phylink_config *config, struct phy_device *phydev, unsigned int mode, phy_interface_t interface, int speed, int duplex, bool tx_pause, bool rx_pause); int ksz8_all_queues_split(struct ksz_device *dev, int queues); +u32 ksz8463_get_port_addr(int port, int offset); +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val); + #endif diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c index 5711a59e2ac9..a8bfcd917bf7 100644 --- a/drivers/net/dsa/microchip/ksz8863_smi.c +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -199,11 +199,11 @@ static void ksz8863_smi_shutdown(struct mdio_device *mdiodev) static const struct of_device_id ksz8863_dt_ids[] = { { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { }, }; diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8_reg.h index 69566a5d9cda..332408567b47 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8_reg.h @@ -1,13 +1,18 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * Microchip KSZ8795 register definitions + * Microchip KSZ8XXX series register definitions + * + * The base for these definitions is KSZ8795 but unless indicated + * differently by their prefix, they apply to all KSZ8 series + * devices. Registers and masks that do change are defined in + * dedicated structures in ksz_common.c. * * Copyright (c) 2017 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> */ -#ifndef __KSZ8795_REG_H -#define __KSZ8795_REG_H +#ifndef __KSZ8_REG_H +#define __KSZ8_REG_H #define KS_PORT_M 0x1F @@ -359,8 +364,6 @@ #define REG_IND_DATA_1 0x77 #define REG_IND_DATA_0 0x78 -#define REG_IND_DATA_PME_EEE_ACL 0xA0 - #define REG_INT_STATUS 0x7C #define REG_INT_ENABLE 0x7D @@ -704,8 +707,6 @@ #define KSZ8795_ID_LO 0x1550 #define KSZ8863_ID_LO 0x1430 -#define KSZ8795_SW_ID 0x8795 - #define PHY_REG_LINK_MD 0x1D #define PHY_START_CABLE_DIAG BIT(15) @@ -728,6 +729,55 @@ #define PHY_POWER_SAVING_ENABLE BIT(2) #define PHY_REMOTE_LOOPBACK BIT(1) +/* KSZ8463 specific registers. */ +#define P1MBCR 0x4C +#define P1MBSR 0x4E +#define PHY1ILR 0x50 +#define PHY1IHR 0x52 +#define P1ANAR 0x54 +#define P1ANLPR 0x56 +#define P2MBCR 0x58 +#define P2MBSR 0x5A +#define PHY2ILR 0x5C +#define PHY2IHR 0x5E +#define P2ANAR 0x60 +#define P2ANLPR 0x62 + +#define P1CR1 0x6C +#define P1CR2 0x6E +#define P1CR3 0x72 +#define P1CR4 0x7E +#define P1SR 0x80 + +#define KSZ8463_FLUSH_TABLE_CTRL 0xAD + +#define KSZ8463_FLUSH_DYN_MAC_TABLE BIT(2) +#define KSZ8463_FLUSH_STA_MAC_TABLE BIT(1) + +#define KSZ8463_REG_SW_CTRL_9 0xAE + +#define KSZ8463_REG_CFG_CTRL 0xD8 + +#define PORT_2_COPPER_MODE BIT(7) +#define PORT_1_COPPER_MODE BIT(6) +#define PORT_COPPER_MODE_S 6 + +#define KSZ8463_REG_SW_RESET 0x126 + +#define KSZ8463_GLOBAL_SOFTWARE_RESET BIT(0) + +#define KSZ8463_PTP_CLK_CTRL 0x600 + +#define PTP_CLK_ENABLE BIT(1) + +#define KSZ8463_PTP_MSG_CONF1 0x620 + +#define PTP_ENABLE BIT(6) + +#define KSZ8463_REG_DSP_CTRL_6 0x734 + +#define COPPER_RECEIVE_ADJUSTMENT BIT(13) + /* Chip resource */ #define PRIO_QUEUES 4 @@ -783,7 +833,9 @@ #define KSZ8795_MIB_TOTAL_TX_1 0x105 #define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100 -#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105 +#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x103 + +#define KSZ8895_MIB_PACKET_DROPPED_RX_0 0x105 #define MIB_PACKET_DROPPED 0x0000FFFF diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 425e20daf1e9..5facffbb9c9a 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/kernel.h> @@ -56,187 +56,6 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) REG_SW_MTU_MASK, frame_size); } -/** - * ksz9477_handle_wake_reason - Handle wake reason on a specified port. - * @dev: The device structure. - * @port: The port number. - * - * This function reads the PME (Power Management Event) status register of a - * specified port to determine the wake reason. If there is no wake event, it - * returns early. Otherwise, it logs the wake reason which could be due to a - * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register - * is then cleared to acknowledge the handling of the wake event. - * - * Return: 0 on success, or an error code on failure. - */ -static int ksz9477_handle_wake_reason(struct ksz_device *dev, int port) -{ - u8 pme_status; - int ret; - - ret = ksz_pread8(dev, port, REG_PORT_PME_STATUS, &pme_status); - if (ret) - return ret; - - if (!pme_status) - return 0; - - dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, - pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", - pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", - pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); - - return ksz_pwrite8(dev, port, REG_PORT_PME_STATUS, pme_status); -} - -/** - * ksz9477_get_wol - Get Wake-on-LAN settings for a specified port. - * @dev: The device structure. - * @port: The port number. - * @wol: Pointer to ethtool Wake-on-LAN settings structure. - * - * This function checks the PME Pin Control Register to see if PME Pin Output - * Enable is set, indicating PME is enabled. If enabled, it sets the supported - * and active WoL flags. - */ -void ksz9477_get_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol) -{ - u8 pme_ctrl; - int ret; - - if (!dev->wakeup_source) - return; - - wol->supported = WAKE_PHY; - - /* Check if the current MAC address on this port can be set - * as global for WAKE_MAGIC support. The result may vary - * dynamically based on other ports configurations. - */ - if (ksz_is_port_mac_global_usable(dev->ds, port)) - wol->supported |= WAKE_MAGIC; - - ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl); - if (ret) - return; - - if (pme_ctrl & PME_WOL_MAGICPKT) - wol->wolopts |= WAKE_MAGIC; - if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) - wol->wolopts |= WAKE_PHY; -} - -/** - * ksz9477_set_wol - Set Wake-on-LAN settings for a specified port. - * @dev: The device structure. - * @port: The port number. - * @wol: Pointer to ethtool Wake-on-LAN settings structure. - * - * This function configures Wake-on-LAN (WoL) settings for a specified port. - * It validates the provided WoL options, checks if PME is enabled via the - * switch's PME Pin Control Register, clears any previous wake reasons, - * and sets the Magic Packet flag in the port's PME control register if - * specified. - * - * Return: 0 on success, or other error codes on failure. - */ -int ksz9477_set_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol) -{ - u8 pme_ctrl = 0, pme_ctrl_old = 0; - bool magic_switched_off; - bool magic_switched_on; - int ret; - - if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) - return -EINVAL; - - if (!dev->wakeup_source) - return -EOPNOTSUPP; - - ret = ksz9477_handle_wake_reason(dev, port); - if (ret) - return ret; - - if (wol->wolopts & WAKE_MAGIC) - pme_ctrl |= PME_WOL_MAGICPKT; - if (wol->wolopts & WAKE_PHY) - pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; - - ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl_old); - if (ret) - return ret; - - if (pme_ctrl_old == pme_ctrl) - return 0; - - magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && - !(pme_ctrl & PME_WOL_MAGICPKT); - magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && - (pme_ctrl & PME_WOL_MAGICPKT); - - /* To keep reference count of MAC address, we should do this - * operation only on change of WOL settings. - */ - if (magic_switched_on) { - ret = ksz_switch_macaddr_get(dev->ds, port, NULL); - if (ret) - return ret; - } else if (magic_switched_off) { - ksz_switch_macaddr_put(dev->ds); - } - - ret = ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, pme_ctrl); - if (ret) { - if (magic_switched_on) - ksz_switch_macaddr_put(dev->ds); - return ret; - } - - return 0; -} - -/** - * ksz9477_wol_pre_shutdown - Prepares the switch device for shutdown while - * considering Wake-on-LAN (WoL) settings. - * @dev: The switch device structure. - * @wol_enabled: Pointer to a boolean which will be set to true if WoL is - * enabled on any port. - * - * This function prepares the switch device for a safe shutdown while taking - * into account the Wake-on-LAN (WoL) settings on the user ports. It updates - * the wol_enabled flag accordingly to reflect whether WoL is active on any - * port. - */ -void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) -{ - struct dsa_port *dp; - int ret; - - *wol_enabled = false; - - if (!dev->wakeup_source) - return; - - dsa_switch_for_each_user_port(dp, dev->ds) { - u8 pme_ctrl = 0; - - ret = ksz_pread8(dev, dp->index, REG_PORT_PME_CTRL, &pme_ctrl); - if (!ret && pme_ctrl) - *wol_enabled = true; - - /* make sure there are no pending wake events which would - * prevent the device from going to sleep/shutdown. - */ - ksz9477_handle_wake_reason(dev, dp->index); - } - - /* Now we are save to enable PME pin. */ - if (*wol_enabled) - ksz_write8(dev, REG_SW_PME_CTRL, PME_ENABLE); -} - static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) { unsigned int val; @@ -342,6 +161,190 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 10, 1000); } +static void port_sgmii_s(struct ksz_device *dev, uint port, u16 devid, u16 reg) +{ + u32 data; + + data = (devid & MII_MMD_CTRL_DEVAD_MASK) << 16; + data |= reg; + ksz_pwrite32(dev, port, REG_PORT_SGMII_ADDR__4, data); +} + +static void port_sgmii_r(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 *buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pread16(dev, port, REG_PORT_SGMII_DATA__4 + 2, buf); +} + +static void port_sgmii_w(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pwrite32(dev, port, REG_PORT_SGMII_DATA__4, buf); +} + +static int ksz9477_pcs_read(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + u16 val; + + port_sgmii_r(dev, port, mmd, reg, &val); + + /* Simulate a value to activate special code in the XPCS driver if + * supported. + */ + if (mmd == MDIO_MMD_PMAPMD) { + if (reg == MDIO_DEVID1) + val = 0x9477; + else if (reg == MDIO_DEVID2) + val = 0x22 << 10; + } else if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + /* Need to update MII_BMCR register with the exact speed and + * duplex mode when running in SGMII mode and this register is + * used to detect connected speed in that mode. + */ + if (reg == MMD_SR_MII_AUTO_NEG_STATUS) { + int duplex, speed; + + if (val & SR_MII_STAT_LINK_UP) { + speed = (val >> SR_MII_STAT_S) & SR_MII_STAT_M; + if (speed == SR_MII_STAT_1000_MBPS) + speed = SPEED_1000; + else if (speed == SR_MII_STAT_100_MBPS) + speed = SPEED_100; + else + speed = SPEED_10; + + if (val & SR_MII_STAT_FULL_DUPLEX) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + if (!p->phydev.link || + p->phydev.speed != speed || + p->phydev.duplex != duplex) { + u16 ctrl; + + p->phydev.link = 1; + p->phydev.speed = speed; + p->phydev.duplex = duplex; + port_sgmii_r(dev, port, mmd, MII_BMCR, + &ctrl); + ctrl &= BMCR_ANENABLE; + ctrl |= mii_bmcr_encode_fixed(speed, + duplex); + port_sgmii_w(dev, port, mmd, MII_BMCR, + ctrl); + } + } else { + p->phydev.link = 0; + } + } else if (reg == MII_BMSR) { + p->phydev.link = !!(val & BMSR_LSTATUS); + } + } + + return val; +} + +static int ksz9477_pcs_write(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + + if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + if (reg == MMD_SR_MII_AUTO_NEG_CTRL) { + u16 sgmii_mode = SR_MII_PCS_SGMII << SR_MII_PCS_MODE_S; + + /* Need these bits for 1000BASE-X mode to work with + * AN on. + */ + if (!(val & sgmii_mode)) + val |= SR_MII_SGMII_LINK_UP | + SR_MII_TX_CFG_PHY_MASTER; + + /* SGMII interrupt in the port cannot be masked, so + * make sure interrupt is not enabled as it is not + * handled. + */ + val &= ~SR_MII_AUTO_NEG_COMPLETE_INTR; + } else if (reg == MII_BMCR) { + /* The MII_ADVERTISE register needs to write once + * before doing auto-negotiation for the correct + * config_word to be sent out after reset. + */ + if ((val & BMCR_ANENABLE) && !p->sgmii_adv_write) { + u16 adv; + + /* The SGMII port cannot disable flow control + * so it is better to just advertise symmetric + * pause. + */ + port_sgmii_r(dev, port, mmd, MII_ADVERTISE, + &adv); + adv |= ADVERTISE_1000XPAUSE; + adv &= ~ADVERTISE_1000XPSE_ASYM; + port_sgmii_w(dev, port, mmd, MII_ADVERTISE, + adv); + p->sgmii_adv_write = 1; + } else if (val & BMCR_RESET) { + p->sgmii_adv_write = 0; + } + } else if (reg == MII_ADVERTISE) { + /* XPCS driver writes to this register so there is no + * need to update it for the errata. + */ + p->sgmii_adv_write = 1; + } + } + port_sgmii_w(dev, port, mmd, reg, val); + + return 0; +} + +int ksz9477_pcs_create(struct ksz_device *dev) +{ + /* This chip has a SGMII port. */ + if (ksz_has_sgmii_port(dev)) { + int port = ksz_get_sgmii_port(dev); + struct ksz_port *p = &dev->ports[port]; + struct phylink_pcs *pcs; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc(dev->dev); + if (!bus) + return -ENOMEM; + + bus->name = "ksz_pcs_mdio_bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(dev->dev)); + bus->read_c45 = &ksz9477_pcs_read; + bus->write_c45 = &ksz9477_pcs_write; + bus->parent = dev->dev; + bus->phy_mask = ~0; + bus->priv = dev; + + ret = devm_mdiobus_register(dev->dev, bus); + if (ret) + return ret; + + pcs = xpcs_create_pcs_mdiodev(bus, 0); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + p->pcs = pcs; + } + + return 0; +} + int ksz9477_reset_switch(struct ksz_device *dev) { u8 data8; @@ -427,54 +430,70 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) mutex_unlock(&p->mib.cnt_mutex); } -int ksz9477_errata_monitor(struct ksz_device *dev, int port, - u64 tx_late_col) +static int ksz9477_half_duplex_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) { + u8 lue_ctrl; u32 pmavbc; - u8 status; u16 pqm; int ret; - ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status); + /* Errata DS80000754 recommends monitoring potential faults in + * half-duplex mode. The switch might not be able to communicate anymore + * in these states. If you see this message, please read the + * errata-sheet for more information: + * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf + * To workaround this issue, half-duplex mode should be avoided. + * A software reset could be implemented to recover from this state. + */ + dev_warn_once(dev->dev, + "Half-duplex detected on port %d, transmission halt may occur\n", + port); + if (tx_late_col != 0) { + /* Transmission halt with late collisions */ + dev_crit_once(dev->dev, + "TX late collisions detected, transmission may be halted on port %d\n", + port); + } + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &lue_ctrl); if (ret) return ret; - if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) == PORT_INTF_SPEED_NONE) && - !(status & PORT_INTF_FULL_DUPLEX)) { - /* Errata DS80000754 recommends monitoring potential faults in - * half-duplex mode. The switch might not be able to communicate anymore - * in these states. - * If you see this message, please read the errata-sheet for more information: - * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf - * To workaround this issue, half-duplex mode should be avoided. - * A software reset could be implemented to recover from this state. - */ - dev_warn_once(dev->dev, - "Half-duplex detected on port %d, transmission halt may occur\n", - port); - if (tx_late_col != 0) { - /* Transmission halt with late collisions */ - dev_crit_once(dev->dev, - "TX late collisions detected, transmission may be halted on port %d\n", - port); - } - ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &status); + if (lue_ctrl & SW_VLAN_ENABLE) { + ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm); if (ret) return ret; - if (status & SW_VLAN_ENABLE) { - ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm); - if (ret) - return ret; - ret = ksz_read32(dev, REG_PMAVBC, &pmavbc); - if (ret) - return ret; - if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) || - (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) { - /* Transmission halt with Half-Duplex and VLAN */ - dev_crit_once(dev->dev, - "resources out of limits, transmission may be halted\n"); - } + + ret = ksz_read32(dev, REG_PMAVBC, &pmavbc); + if (ret) + return ret; + + if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) || + (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) { + /* Transmission halt with Half-Duplex and VLAN */ + dev_crit_once(dev->dev, + "resources out of limits, transmission may be halted\n"); } } + + return ret; +} + +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u8 status; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status); + if (ret) + return ret; + + if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) + == PORT_INTF_SPEED_NONE) && + !(status & PORT_INTF_FULL_DUPLEX)) { + ret = ksz9477_half_duplex_monitor(dev, port, tx_late_col); + } + return ret; } @@ -1143,31 +1162,64 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; + + if (ksz_is_sgmii_port(dev, port)) { + struct ksz_port *p = &dev->ports[port]; + + phy_interface_or(config->supported_interfaces, + config->supported_interfaces, + p->pcs->supported_interfaces); + } } int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { u32 secs = msecs / 1000; - u8 value; - u8 data; + u8 data, mult, value; + u32 max_val; int ret; - value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); +#define MAX_TIMER_VAL ((1 << 8) - 1) - ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); - if (ret < 0) - return ret; + /* The aging timer comprises a 3-bit multiplier and an 8-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 255 = 1785 seconds. + */ + if (!secs) + secs = 1; - data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); if (ret < 0) return ret; - value &= ~SW_AGE_CNT_M; - value |= FIELD_PREP(SW_AGE_CNT_M, data); + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } + + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + if (ret < 0) + return ret; + } - return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + value = DIV_ROUND_UP(secs, data); + return ksz_write8(dev, REG_SW_LUE_CTRL_3, value); } void ksz9477_port_queue_split(struct ksz_device *dev, int port) @@ -1188,6 +1240,7 @@ void ksz9477_port_queue_split(struct ksz_device *dev, int port) void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { + const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; u16 data16; u8 member; @@ -1232,12 +1285,12 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz9477_port_acl_init(dev, port); /* clear pending wake flags */ - ksz9477_handle_wake_reason(dev, port); + ksz_handle_wake_reason(dev, port); /* Disable all WoL options by default. Otherwise * ksz_switch_macaddr_get/put logic will not work properly. */ - ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, 0); + ksz_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], 0); } void ksz9477_config_cpu_port(struct dsa_switch *ds) @@ -1295,12 +1348,22 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) if (i == dev->cpu_port) continue; ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); + + /* Power down the internal PHY if port is unused. */ + if (dsa_is_unused_port(ds, i) && dev->info->internal_phy[i]) + ksz_pwrite16(dev, i, 0x100, BMCR_PDOWN); } } +#define RESV_MCAST_CNT 8 + +static u8 reserved_mcast_map[RESV_MCAST_CNT] = { 0, 1, 3, 16, 32, 33, 2, 17 }; + int ksz9477_enable_stp_addr(struct ksz_device *dev) { + u8 i, ports, update; const u32 *masks; + bool override; u32 data; int ret; @@ -1309,23 +1372,87 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) /* Enable Reserved multicast table */ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); - /* Set the Override bit for forwarding BPDU packet to CPU */ - ret = ksz_write32(dev, REG_SW_ALU_VAL_B, - ALU_V_OVERRIDE | BIT(dev->cpu_port)); - if (ret < 0) - return ret; + /* The reserved multicast address table has 8 entries. Each entry has + * a default value of which port to forward. It is assumed the host + * port is the last port in most of the switches, but that is not the + * case for KSZ9477 or maybe KSZ9897. For LAN937X family the default + * port is port 5, the first RGMII port. It is okay for LAN9370, a + * 5-port switch, but may not be correct for the other 8-port + * versions. It is necessary to update the whole table to forward to + * the right ports. + * Furthermore PTP messages can use a reserved multicast address and + * the host will not receive them if this table is not correct. + */ + for (i = 0; i < RESV_MCAST_CNT; i++) { + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_READ]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; - data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; - ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - if (ret < 0) - return ret; + ret = ksz_read32(dev, REG_SW_ALU_VAL_B, &data); + if (ret < 0) + return ret; - /* wait to be finished */ - ret = ksz9477_wait_alu_sta_ready(dev); - if (ret < 0) { - dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); - return ret; + override = false; + ports = data & dev->port_mask; + switch (i) { + case 0: + case 6: + /* Change the host port. */ + update = BIT(dev->cpu_port); + override = true; + break; + case 2: + /* Change the host port. */ + update = BIT(dev->cpu_port); + break; + case 4: + case 5: + case 7: + /* Skip the host port. */ + update = dev->port_mask & ~BIT(dev->cpu_port); + break; + default: + update = ports; + break; + } + if (update != ports || override) { + data &= ~dev->port_mask; + data |= update; + /* Set Override bit to receive frame even when port is + * closed. + */ + if (override) + data |= ALU_V_OVERRIDE; + ret = ksz_write32(dev, REG_SW_ALU_VAL_B, data); + if (ret < 0) + return ret; + + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_WRITE]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; + } } return 0; @@ -1334,6 +1461,7 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) int ksz9477_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; int ret = 0; ds->mtu_enforcement_ingress = true; @@ -1364,13 +1492,11 @@ int ksz9477_setup(struct dsa_switch *ds) /* enable global MIB counter freeze function */ ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); - /* Make sure PME (WoL) is not enabled. If requested, it will be - * enabled by ksz9477_wol_pre_shutdown(). Otherwise, some PMICs do not - * like PME events changes before shutdown. + /* Make sure PME (WoL) is not enabled. If requested, it will + * be enabled by ksz_wol_pre_shutdown(). Otherwise, some PMICs + * do not like PME events changes before shutdown. */ - ksz_write8(dev, REG_SW_PME_CTRL, 0); - - return 0; + return ksz_write8(dev, regs[REG_SW_PME_CTRL], 0); } u32 ksz9477_get_port_addr(int port, int offset) diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index 239a281da10b..0d1a6dfda23e 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series Header file * - * Copyright (C) 2017-2022 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_H @@ -60,11 +60,6 @@ void ksz9477_switch_exit(struct ksz_device *dev); void ksz9477_port_queue_split(struct ksz_device *dev, int port); void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr); void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr); -void ksz9477_get_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); -int ksz9477_set_wol(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); -void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled); int ksz9477_port_acl_init(struct ksz_device *dev, int port); void ksz9477_port_acl_free(struct ksz_device *dev, int port); @@ -102,4 +97,6 @@ void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, u16 ethtype, u8 *src_mac, u8 *dst_mac, unsigned long cookie, u32 prio); +int ksz9477_pcs_create(struct ksz_device *dev); + #endif diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 7d7560f23a73..a2beb27459f1 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series register access through I2C * - * Copyright (C) 2018-2019 Microchip Technology Inc. + * Copyright (C) 2018-2024 Microchip Technology Inc. */ #include <linux/i2c.h> @@ -16,6 +16,8 @@ KSZ_REGMAP_TABLE(ksz9477, not_used, 16, 0, 0); static int ksz9477_i2c_probe(struct i2c_client *i2c) { + const struct ksz_chip_data *chip; + struct device *ddev = &i2c->dev; struct regmap_config rc; struct ksz_device *dev; int i, ret; @@ -24,6 +26,12 @@ static int ksz9477_i2c_probe(struct i2c_client *i2c) if (!dev) return -ENOMEM; + chip = device_get_match_data(ddev); + if (!chip) + return -EINVAL; + + /* Save chip id to do special initialization when probing. */ + dev->chip_id = chip->chip_id; for (i = 0; i < __KSZ_NUM_REGMAPS; i++) { rc = ksz9477_regmap_config[i]; rc.lock_arg = &dev->regmap_mutex; @@ -111,14 +119,22 @@ static const struct of_device_id ksz9477_dt_ids[] = { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, + { + .compatible = "microchip,lan9646", + .data = &ksz_switch_chips[LAN9646] + }, {}, }; MODULE_DEVICE_TABLE(of, ksz9477_dt_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_i2c_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct i2c_driver ksz9477_i2c_driver = { .driver = { .name = "ksz9477-switch", .of_match_table = ksz9477_dt_ids, + .pm = &ksz_i2c_pm_ops, }, .probe = ksz9477_i2c_probe, .remove = ksz9477_i2c_remove, diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index d5354c600ea1..61ea11e3338e 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 register definitions * - * Copyright (C) 2017-2018 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_REGS_H @@ -38,11 +38,6 @@ #define SWITCH_REVISION_S 4 #define SWITCH_RESET 0x01 -#define REG_SW_PME_CTRL 0x0006 - -#define PME_ENABLE BIT(1) -#define PME_POLARITY BIT(0) - #define REG_GLOBAL_OPTIONS 0x000F #define SW_GIGABIT_ABLE BIT(6) @@ -170,8 +165,6 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) #define SW_AGE_CNT_M GENMASK(5, 3) -#define SW_AGE_CNT_S 3 -#define SW_AGE_PERIOD_10_8_M GENMASK(10, 8) #define SW_RESV_MCAST_ENABLE BIT(2) #define SW_HASH_OPTION_M 0x03 #define SW_HASH_OPTION_CRC 1 @@ -404,7 +397,6 @@ #define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1) #define ALU_STAT_START BIT(7) -#define ALU_RESV_MCAST_ADDR BIT(1) #define REG_SW_ALU_VAL_A 0x0420 @@ -807,13 +799,6 @@ #define REG_PORT_AVB_SR_1_TYPE 0x0008 #define REG_PORT_AVB_SR_2_TYPE 0x000A -#define REG_PORT_PME_STATUS 0x0013 -#define REG_PORT_PME_CTRL 0x0017 - -#define PME_WOL_MAGICPKT BIT(2) -#define PME_WOL_LINKUP BIT(1) -#define PME_WOL_ENERGY BIT(0) - #define REG_PORT_INT_STATUS 0x001B #define REG_PORT_INT_MASK 0x001F diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index b074b4bb0629..0c10351fe5eb 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/delay.h> @@ -23,6 +23,7 @@ #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/micrel_phy.h> +#include <linux/pinctrl/consumer.h> #include <net/dsa.h> #include <net/ieee8021q.h> #include <net/pkt_cls.h> @@ -246,16 +247,16 @@ static const struct ksz_drive_strength ksz9477_drive_strengths[] = { { SW_DRIVE_STRENGTH_28MA, 28000 }, }; -/* ksz8830_drive_strengths - Drive strength mapping for KSZ8830, KSZ8873, .. +/* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, .. * variants. * This values are documented in KSZ8873 and KSZ8863 datasheets. */ -static const struct ksz_drive_strength ksz8830_drive_strengths[] = { +static const struct ksz_drive_strength ksz88x3_drive_strengths[] = { { 0, 8000 }, { KSZ8873_DRIVE_STRENGTH_16MA, 16000 }, }; -static void ksz8830_phylink_mac_config(struct phylink_config *config, +static void ksz88x3_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state); static void ksz_phylink_mac_config(struct phylink_config *config, @@ -265,19 +266,105 @@ static void ksz_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface); -static const struct phylink_mac_ops ksz8830_phylink_mac_ops = { - .mac_config = ksz8830_phylink_mac_config, +/** + * ksz_phylink_mac_disable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * + * This function is a dummy handler. See ksz_phylink_mac_enable_tx_lpi() for + * a detailed explanation of EEE/LPI handling in KSZ switches. + */ +static void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ +} + +/** + * ksz_phylink_mac_enable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * @timer: timer value before entering LPI (unused) + * @tx_clock_stop: whether to stop the TX clock in LPI mode (unused) + * + * This function signals to phylink that the driver architecture supports + * LPI management, enabling phylink to control EEE advertisement during + * negotiation according to IEEE Std 802.3 (Clause 78). + * + * Hardware Management of EEE/LPI State: + * For KSZ switch ports with integrated PHYs (e.g., KSZ9893R ports 1-2), + * observation and testing suggest that the actual EEE / Low Power Idle (LPI) + * state transitions are managed autonomously by the hardware based on + * the auto-negotiation results. (Note: While the datasheet describes EEE + * operation based on negotiation, it doesn't explicitly detail the internal + * MAC/PHY interaction, so autonomous hardware management of the MAC state + * for LPI is inferred from observed behavior). + * This hardware control, consistent with the switch's ability to operate + * autonomously via strapping, means MAC-level software intervention is not + * required or exposed for managing the LPI state once EEE is negotiated. + * (Ref: KSZ9893R Data Sheet DS00002420D, primarily Section 4.7.5 explaining + * EEE, also Sections 4.1.7 on Auto-Negotiation and 3.2.1 on Configuration + * Straps). + * + * Additionally, ports configured as MAC interfaces (e.g., KSZ9893R port 3) + * lack documented MAC-level LPI control. + * + * Therefore, this callback performs no action and serves primarily to inform + * phylink of LPI awareness and to document the inferred hardware behavior. + * + * Returns: 0 (Always success) + */ +static int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + return 0; +} + +static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { + .mac_config = ksz88x3_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct phylink_mac_ops ksz8_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct ksz_dev_ops ksz8463_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8463_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8463_r_phy, + .w_phy = ksz8463_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz88xx_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, }; -static const struct ksz_dev_ops ksz8_dev_ops = { +static const struct ksz_dev_ops ksz88xx_dev_ops = { .setup = ksz8_setup, .get_port_addr = ksz8_get_port_addr, .cfg_port_member = ksz8_cfg_port_member, @@ -307,6 +394,44 @@ static const struct ksz_dev_ops ksz8_dev_ops = { .init = ksz8_switch_init, .exit = ksz8_switch_exit, .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, +}; + +static const struct ksz_dev_ops ksz87xx_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8_r_phy, + .w_phy = ksz8_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, }; static void ksz9477_phylink_mac_link_up(struct phylink_config *config, @@ -316,10 +441,29 @@ static void ksz9477_phylink_mac_link_up(struct phylink_config *config, int speed, int duplex, bool tx_pause, bool rx_pause); +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, }; static const struct ksz_dev_ops ksz9477_dev_ops = { @@ -348,21 +492,24 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .mdb_add = ksz9477_mdb_add, .mdb_del = ksz9477_mdb_del, .change_mtu = ksz9477_change_mtu, - .get_wol = ksz9477_get_wol, - .set_wol = ksz9477_set_wol, - .wol_pre_shutdown = ksz9477_wol_pre_shutdown, + .pme_write8 = ksz_write8, + .pme_pread8 = ksz_pread8, + .pme_pwrite8 = ksz_pwrite8, .config_cpu_port = ksz9477_config_cpu_port, .tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc, .enable_stp_addr = ksz9477_enable_stp_addr, .reset = ksz9477_reset_switch, .init = ksz9477_switch_init, .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, }; static const struct phylink_mac_ops lan937x_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops lan937x_dev_ops = { @@ -373,6 +520,8 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, .port_setup = lan937x_port_setup, .set_ageing_time = lan937x_set_ageing_time, + .mdio_bus_preinit = lan937x_mdio_bus_preinit, + .create_phy_addr_map = lan937x_create_phy_addr_map, .r_phy = lan937x_r_phy, .w_phy = lan937x_w_phy, .r_mib_cnt = ksz9477_r_mib_cnt, @@ -401,6 +550,60 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .exit = lan937x_switch_exit, }; +static const u16 ksz8463_regs[] = { + [REG_SW_MAC_ADDR] = 0x10, + [REG_IND_CTRL_0] = 0x30, + [REG_IND_DATA_8] = 0x26, + [REG_IND_DATA_CHECK] = 0x26, + [REG_IND_DATA_HI] = 0x28, + [REG_IND_DATA_LO] = 0x2C, + [REG_IND_MIB_CHECK] = 0x2F, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x0F, + [S_TAIL_TAG_CTRL] = 0xAD, + [P_STP_CTRL] = 0x6F, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8463_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(3), + [SW_TAIL_TAG_ENABLE] = BIT(0), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(15, 12), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16), + [VLAN_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_USE_FID] = BIT(21), + [STATIC_MAC_TABLE_FID] = GENMASK(25, 22), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(20), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22), +}; + +static u8 ksz8463_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 22, + [DYNAMIC_MAC_ENTRIES_H] = 8, + [DYNAMIC_MAC_ENTRIES] = 24, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 22, + [DYNAMIC_MAC_SRC_PORT] = 20, +}; + static const u16 ksz8795_regs[] = { [REG_SW_MAC_ADDR] = 0x68, [REG_IND_CTRL_0] = 0x6E, @@ -423,6 +626,9 @@ static const u16 ksz8795_regs[] = { [S_MULTICAST_CTRL] = 0x04, [P_XMII_CTRL_0] = 0x06, [P_XMII_CTRL_1] = 0x06, + [REG_SW_PME_CTRL] = 0x8003, + [REG_PORT_PME_STATUS] = 0x8003, + [REG_PORT_PME_CTRL] = 0x8007, }; static const u32 ksz8795_masks[] = { @@ -531,6 +737,61 @@ static u8 ksz8863_shifts[] = { [DYNAMIC_MAC_SRC_PORT] = 20, }; +static const u16 ksz8895_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, + [REG_IND_CTRL_0] = 0x6E, + [REG_IND_DATA_8] = 0x70, + [REG_IND_DATA_CHECK] = 0x72, + [REG_IND_DATA_HI] = 0x71, + [REG_IND_DATA_LO] = 0x75, + [REG_IND_MIB_CHECK] = 0x75, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x09, + [S_TAIL_TAG_CTRL] = 0x0C, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8895_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(7), + [SW_TAIL_TAG_ENABLE] = BIT(1), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(6, 0), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7), + [VLAN_TABLE_VALID] = BIT(12), + [STATIC_MAC_TABLE_VALID] = BIT(21), + [STATIC_MAC_TABLE_USE_FID] = BIT(23), + [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), +}; + +static const u8 ksz8895_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 7, + [VLAN_TABLE] = 13, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 24, + [DYNAMIC_MAC_ENTRIES_H] = 3, + [DYNAMIC_MAC_ENTRIES] = 29, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 27, + [DYNAMIC_MAC_SRC_PORT] = 24, +}; + static const u16 ksz9477_regs[] = { [REG_SW_MAC_ADDR] = 0x0302, [P_STP_CTRL] = 0x0B04, @@ -539,11 +800,16 @@ static const u16 ksz9477_regs[] = { [S_MULTICAST_CTRL] = 0x0331, [P_XMII_CTRL_0] = 0x0300, [P_XMII_CTRL_1] = 0x0301, + [REG_SW_PME_CTRL] = 0x0006, + [REG_PORT_PME_STATUS] = 0x0013, + [REG_PORT_PME_CTRL] = 0x0017, }; static const u32 ksz9477_masks[] = { [ALU_STAT_WRITE] = 0, [ALU_STAT_READ] = 1, + [ALU_STAT_DIRECT] = 0, + [ALU_RESV_MCAST_ADDR] = BIT(1), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -571,6 +837,8 @@ static const u8 ksz9477_xmii_ctrl1[] = { static const u32 lan937x_masks[] = { [ALU_STAT_WRITE] = 1, [ALU_STAT_READ] = 2, + [ALU_STAT_DIRECT] = BIT(3), + [ALU_RESV_MCAST_ADDR] = BIT(2), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -934,8 +1202,7 @@ static const struct regmap_range ksz9477_valid_regs[] = { regmap_reg_range(0x701b, 0x701b), regmap_reg_range(0x701f, 0x7020), regmap_reg_range(0x7030, 0x7030), - regmap_reg_range(0x7200, 0x7203), - regmap_reg_range(0x7206, 0x7207), + regmap_reg_range(0x7200, 0x7207), regmap_reg_range(0x7300, 0x7301), regmap_reg_range(0x7400, 0x7401), regmap_reg_range(0x7403, 0x7403), @@ -999,10 +1266,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x1030, 0x1030), regmap_reg_range(0x1100, 0x1115), regmap_reg_range(0x111a, 0x111f), - regmap_reg_range(0x1122, 0x1127), - regmap_reg_range(0x112a, 0x112b), - regmap_reg_range(0x1136, 0x1139), - regmap_reg_range(0x113e, 0x113f), + regmap_reg_range(0x1120, 0x112b), + regmap_reg_range(0x1134, 0x113b), + regmap_reg_range(0x113c, 0x113f), regmap_reg_range(0x1400, 0x1401), regmap_reg_range(0x1403, 0x1403), regmap_reg_range(0x1410, 0x1417), @@ -1029,10 +1295,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x2030, 0x2030), regmap_reg_range(0x2100, 0x2115), regmap_reg_range(0x211a, 0x211f), - regmap_reg_range(0x2122, 0x2127), - regmap_reg_range(0x212a, 0x212b), - regmap_reg_range(0x2136, 0x2139), - regmap_reg_range(0x213e, 0x213f), + regmap_reg_range(0x2120, 0x212b), + regmap_reg_range(0x2134, 0x213b), + regmap_reg_range(0x213c, 0x213f), regmap_reg_range(0x2400, 0x2401), regmap_reg_range(0x2403, 0x2403), regmap_reg_range(0x2410, 0x2417), @@ -1059,10 +1324,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x3030, 0x3030), regmap_reg_range(0x3100, 0x3115), regmap_reg_range(0x311a, 0x311f), - regmap_reg_range(0x3122, 0x3127), - regmap_reg_range(0x312a, 0x312b), - regmap_reg_range(0x3136, 0x3139), - regmap_reg_range(0x313e, 0x313f), + regmap_reg_range(0x3120, 0x312b), + regmap_reg_range(0x3134, 0x313b), + regmap_reg_range(0x313c, 0x313f), regmap_reg_range(0x3400, 0x3401), regmap_reg_range(0x3403, 0x3403), regmap_reg_range(0x3410, 0x3417), @@ -1089,10 +1353,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x4030, 0x4030), regmap_reg_range(0x4100, 0x4115), regmap_reg_range(0x411a, 0x411f), - regmap_reg_range(0x4122, 0x4127), - regmap_reg_range(0x412a, 0x412b), - regmap_reg_range(0x4136, 0x4139), - regmap_reg_range(0x413e, 0x413f), + regmap_reg_range(0x4120, 0x412b), + regmap_reg_range(0x4134, 0x413b), + regmap_reg_range(0x413c, 0x413f), regmap_reg_range(0x4400, 0x4401), regmap_reg_range(0x4403, 0x4403), regmap_reg_range(0x4410, 0x4417), @@ -1119,10 +1382,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x5030, 0x5030), regmap_reg_range(0x5100, 0x5115), regmap_reg_range(0x511a, 0x511f), - regmap_reg_range(0x5122, 0x5127), - regmap_reg_range(0x512a, 0x512b), - regmap_reg_range(0x5136, 0x5139), - regmap_reg_range(0x513e, 0x513f), + regmap_reg_range(0x5120, 0x512b), + regmap_reg_range(0x5134, 0x513b), + regmap_reg_range(0x513c, 0x513f), regmap_reg_range(0x5400, 0x5401), regmap_reg_range(0x5403, 0x5403), regmap_reg_range(0x5410, 0x5417), @@ -1149,10 +1411,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x6030, 0x6030), regmap_reg_range(0x6100, 0x6115), regmap_reg_range(0x611a, 0x611f), - regmap_reg_range(0x6122, 0x6127), - regmap_reg_range(0x612a, 0x612b), - regmap_reg_range(0x6136, 0x6139), - regmap_reg_range(0x613e, 0x613f), + regmap_reg_range(0x6120, 0x612b), + regmap_reg_range(0x6134, 0x613b), + regmap_reg_range(0x613c, 0x613f), regmap_reg_range(0x6300, 0x6301), regmap_reg_range(0x6400, 0x6401), regmap_reg_range(0x6403, 0x6403), @@ -1191,6 +1452,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), @@ -1217,6 +1479,29 @@ static const struct regmap_access_table ksz8873_register_set = { }; const struct ksz_chip_data ksz_switch_chips[] = { + [KSZ8463] = { + .chip_id = KSZ8463_CHIP_ID, + .dev_name = "KSZ8463", + .num_vlans = 16, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x4, /* can be configured as cpu port */ + .port_cnt = 3, + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz8463_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8463_regs, + .masks = ksz8463_masks, + .shifts = ksz8463_shifts, + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .internal_phy = {true, true, false}, + }, + [KSZ8563] = { .chip_id = KSZ8563_CHIP_ID, .dev_name = "KSZ8563", @@ -1244,6 +1529,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {false, false, true}, + .ptp_capable = true, .wr_table = &ksz8563_register_set, .rd_table = &ksz8563_register_set, }, @@ -1253,12 +1539,12 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8795", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, .num_ipms = 4, - .ops = &ksz8_dev_ops, + .ops = &ksz87xx_dev_ops, .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, @@ -1294,12 +1580,12 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8794", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, .num_ipms = 4, - .ops = &ksz8_dev_ops, + .ops = &ksz87xx_dev_ops, .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, @@ -1321,12 +1607,12 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8765", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, .num_ipms = 4, - .ops = &ksz8_dev_ops, + .ops = &ksz87xx_dev_ops, .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, @@ -1343,8 +1629,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, false}, }, - [KSZ8830] = { - .chip_id = KSZ8830_CHIP_ID, + [KSZ88X3] = { + .chip_id = KSZ88X3_CHIP_ID, .dev_name = "KSZ8863/KSZ8873", .num_vlans = 16, .num_alus = 0, @@ -1353,8 +1639,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, .num_tx_queues = 4, .num_ipms = 4, - .ops = &ksz8_dev_ops, - .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1368,6 +1654,61 @@ const struct ksz_chip_data ksz_switch_chips[] = { .rd_table = &ksz8873_register_set, }, + [KSZ8864] = { + /* WARNING + * ======= + * KSZ8864 is similar to KSZ8895, except the first port + * does not exist. + * external cpu + * KSZ8864 1,2,3 4 + * KSZ8895 0,1,2,3 4 + * port_cnt is configured as 5, even though it is 4 + */ + .chip_id = KSZ8864_CHIP_ID, + .dev_name = "KSZ8864", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {false, true, true, true, false}, + }, + + [KSZ8895] = { + .chip_id = KSZ8895_CHIP_ID, + .dev_name = "KSZ8895", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + [KSZ9477] = { .chip_id = KSZ9477_CHIP_ID, .dev_name = "KSZ9477", @@ -1400,6 +1741,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -1527,6 +1870,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {true, true, true}, + .ptp_capable = true, }, [KSZ8567] = { @@ -1562,6 +1906,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, false, false}, .gbit_capable = {false, false, false, false, false, true, true}, + .ptp_capable = true, }, [KSZ9567] = { @@ -1594,6 +1939,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, }, [LAN9370] = { @@ -1608,6 +1954,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 8, .num_ipms = 8, .tc_cbs_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, @@ -1622,6 +1969,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true}, .supports_rgmii = {false, false, false, false, true}, .internal_phy = {true, true, true, true, false}, + .ptp_capable = true, }, [LAN9371] = { @@ -1636,6 +1984,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 8, .num_ipms = 8, .tc_cbs_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, @@ -1650,6 +1999,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true, true}, .supports_rgmii = {false, false, false, false, true, true}, .internal_phy = {true, true, true, true, false, false}, + .ptp_capable = true, }, [LAN9372] = { @@ -1664,6 +2014,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 8, .num_ipms = 8, .tc_cbs_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, @@ -1682,6 +2033,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, }, [LAN9373] = { @@ -1696,6 +2048,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 8, .num_ipms = 8, .tc_cbs_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, @@ -1714,6 +2067,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, false, false, false, true, true}, + .ptp_capable = true, }, [LAN9374] = { @@ -1728,6 +2082,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 8, .num_ipms = 8, .tc_cbs_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, @@ -1746,6 +2101,43 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, + }, + + [LAN9646] = { + .chip_id = LAN9646_CHIP_ID, + .dev_name = "LAN9646", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 4, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, + .wr_table = &ksz9477_register_set, + .rd_table = &ksz9477_register_set, }, }; EXPORT_SYMBOL_GPL(ksz_switch_chips); @@ -1816,6 +2208,18 @@ static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, if (dev->dev_ops->get_caps) dev->dev_ops->get_caps(dev, port, config); + + if (ds->ops->support_eee && ds->ops->support_eee(ds, port)) { + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); + + config->lpi_capabilities = MAC_100FD; + if (dev->info->gbit_capable[port]) + config->lpi_capabilities |= MAC_1000FD; + + /* EEE is fully operational */ + config->eee_enabled_default = true; + } } void ksz_r_mib_stats64(struct ksz_device *dev, int port) @@ -1867,7 +2271,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) spin_unlock(&mib->stats64_lock); - if (dev->info->phy_errata_9477) { + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); if (ret) dev_err(dev->dev, "Failed to monitor transmission halt\n"); @@ -1958,10 +2362,8 @@ static void ksz_get_strings(struct dsa_switch *ds, int port, if (stringset != ETH_SS_STATS) return; - for (i = 0; i < dev->info->mib_cnt; i++) { - memcpy(buf + i * ETH_GSTRING_LEN, - dev->info->mib_names[i].string, ETH_GSTRING_LEN); - } + for (i = 0; i < dev->info->mib_cnt; i++) + ethtool_puts(&buf, dev->info->mib_names[i].string); } /** @@ -2060,6 +2462,12 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); } + /* HSR ports are setup once so need to use the assigned membership + * when the port is enabled. + */ + if (!port_member && p->stp_state == BR_STATE_FORWARDING && + (dev->hsr_ports & BIT(port))) + port_member = dev->hsr_ports; dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); } @@ -2084,19 +2492,103 @@ static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, return dev->dev_ops->w_phy(dev, addr, regnum, val); } +/** + * ksz_parent_mdio_read - Read data from a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to read. + * + * This function provides a direct read operation on the parent MDIO bus for + * accessing PHY registers. By bypassing SPI or I2C, it uses the parent MDIO bus + * to retrieve data from the PHY registers at the specified address and register + * number. + * + * Return: Value of the PHY register, or a negative error code on failure. + */ +static int ksz_parent_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_read_nested(dev->parent_mdio_bus, addr, regnum); +} + +/** + * ksz_parent_mdio_write - Write data to a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to write to. + * @val: Value to write to the PHY register. + * + * This function provides a direct write operation on the parent MDIO bus for + * accessing PHY registers. Bypassing SPI or I2C, it uses the parent MDIO bus + * to modify the PHY register values at the specified address. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parent_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_write_nested(dev->parent_mdio_bus, addr, regnum, val); +} + +/** + * ksz_phy_addr_to_port - Map a PHY address to the corresponding switch port. + * @dev: Pointer to device structure. + * @addr: PHY address to map to a port. + * + * This function finds the corresponding switch port for a given PHY address by + * iterating over all user ports on the device. It checks if a port's PHY + * address in `phy_addr_map` matches the specified address and if the port + * contains an internal PHY. If a match is found, the index of the port is + * returned. + * + * Return: Port index on success, or -EINVAL if no matching port is found. + */ +static int ksz_phy_addr_to_port(struct ksz_device *dev, int addr) +{ + struct dsa_switch *ds = dev->ds; + struct dsa_port *dp; + + dsa_switch_for_each_user_port(dp, ds) { + if (dev->info->internal_phy[dp->index] && + dev->phy_addr_map[dp->index] == addr) + return dp->index; + } + + return -EINVAL; +} + +/** + * ksz_irq_phy_setup - Configure IRQs for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Sets up IRQs for each active PHY connected to the KSZ switch by mapping the + * appropriate IRQs for each PHY and assigning them to the `user_mii_bus` in + * the DSA switch structure. Each IRQ is mapped based on the port's IRQ domain. + * + * Return: 0 on success, or a negative error code on failure. + */ static int ksz_irq_phy_setup(struct ksz_device *dev) { struct dsa_switch *ds = dev->ds; - int phy; + int phy, port; int irq; int ret; - for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) { + for (phy = 0; phy < PHY_MAX_ADDR; phy++) { if (BIT(phy) & ds->phys_mii_mask) { - irq = irq_find_mapping(dev->ports[phy].pirq.domain, + port = ksz_phy_addr_to_port(dev, phy); + if (port < 0) { + ret = port; + goto out; + } + + irq = irq_find_mapping(dev->ports[port].pirq.domain, PORT_SRC_PHY_INT); - if (irq < 0) { - ret = irq; + if (!irq) { + ret = -EINVAL; goto out; } ds->user_mii_bus->irq[phy] = irq; @@ -2111,49 +2603,187 @@ out: return ret; } +/** + * ksz_irq_phy_free - Release IRQ mappings for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Releases any IRQ mappings previously assigned to active PHYs in the KSZ + * switch by disposing of each mapped IRQ in the `user_mii_bus` structure. + */ static void ksz_irq_phy_free(struct ksz_device *dev) { struct dsa_switch *ds = dev->ds; int phy; - for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) + for (phy = 0; phy < PHY_MAX_ADDR; phy++) if (BIT(phy) & ds->phys_mii_mask) irq_dispose_mapping(ds->user_mii_bus->irq[phy]); } +/** + * ksz_parse_dt_phy_config - Parse and validate PHY configuration from DT + * @dev: pointer to the KSZ device structure + * @bus: pointer to the MII bus structure + * @mdio_np: pointer to the MDIO node in the device tree + * + * This function parses and validates PHY configurations for each user port + * defined in the device tree for a KSZ switch device. It verifies that the + * `phy-handle` properties are correctly set and that the internal PHYs match + * expected addresses and parent nodes. Sets up the PHY mask in the MII bus if + * all validations pass. Logs error messages for any mismatches or missing data. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parse_dt_phy_config(struct ksz_device *dev, struct mii_bus *bus, + struct device_node *mdio_np) +{ + struct device_node *phy_node, *phy_parent_node; + bool phys_are_valid = true; + struct dsa_port *dp; + u32 phy_addr; + int ret; + + dsa_switch_for_each_user_port(dp, dev->ds) { + if (!dev->info->internal_phy[dp->index]) + continue; + + phy_node = of_parse_phandle(dp->dn, "phy-handle", 0); + if (!phy_node) { + dev_err(dev->dev, "failed to parse phy-handle for port %d.\n", + dp->index); + phys_are_valid = false; + continue; + } + + phy_parent_node = of_get_parent(phy_node); + if (!phy_parent_node) { + dev_err(dev->dev, "failed to get PHY-parent node for port %d\n", + dp->index); + phys_are_valid = false; + } else if (phy_parent_node != mdio_np) { + dev_err(dev->dev, "PHY-parent node mismatch for port %d, expected %pOF, got %pOF\n", + dp->index, mdio_np, phy_parent_node); + phys_are_valid = false; + } else { + ret = of_property_read_u32(phy_node, "reg", &phy_addr); + if (ret < 0) { + dev_err(dev->dev, "failed to read PHY address for port %d. Error %d\n", + dp->index, ret); + phys_are_valid = false; + } else if (phy_addr != dev->phy_addr_map[dp->index]) { + dev_err(dev->dev, "PHY address mismatch for port %d, expected 0x%x, got 0x%x\n", + dp->index, dev->phy_addr_map[dp->index], + phy_addr); + phys_are_valid = false; + } else { + bus->phy_mask |= BIT(phy_addr); + } + } + + of_node_put(phy_node); + of_node_put(phy_parent_node); + } + + if (!phys_are_valid) + return -EINVAL; + + return 0; +} + +/** + * ksz_mdio_register - Register and configure the MDIO bus for the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * This function sets up and registers an MDIO bus for the KSZ switch device, + * allowing access to its internal PHYs. If the device supports side MDIO, + * the function will configure the external MDIO controller specified by the + * "mdio-parent-bus" device tree property to directly manage internal PHYs. + * Otherwise, SPI or I2C access is set up for PHY access. + * + * Return: 0 on success, or a negative error code on failure. + */ static int ksz_mdio_register(struct ksz_device *dev) { + struct device_node *parent_bus_node; + struct mii_bus *parent_bus = NULL; struct dsa_switch *ds = dev->ds; struct device_node *mdio_np; struct mii_bus *bus; - int ret; + int ret, i; mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio"); if (!mdio_np) return 0; + parent_bus_node = of_parse_phandle(mdio_np, "mdio-parent-bus", 0); + if (parent_bus_node && !dev->info->phy_side_mdio_supported) { + dev_err(dev->dev, "Side MDIO bus is not supported for this HW, ignoring 'mdio-parent-bus' property.\n"); + ret = -EINVAL; + + goto put_mdio_node; + } else if (parent_bus_node) { + parent_bus = of_mdio_find_bus(parent_bus_node); + if (!parent_bus) { + ret = -EPROBE_DEFER; + + goto put_mdio_node; + } + + dev->parent_mdio_bus = parent_bus; + } + bus = devm_mdiobus_alloc(ds->dev); if (!bus) { - of_node_put(mdio_np); - return -ENOMEM; + ret = -ENOMEM; + goto put_mdio_node; + } + + if (dev->dev_ops->mdio_bus_preinit) { + ret = dev->dev_ops->mdio_bus_preinit(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } + + if (dev->dev_ops->create_phy_addr_map) { + ret = dev->dev_ops->create_phy_addr_map(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } else { + for (i = 0; i < dev->info->port_cnt; i++) + dev->phy_addr_map[i] = i; } bus->priv = dev; - bus->read = ksz_sw_mdio_read; - bus->write = ksz_sw_mdio_write; - bus->name = "ksz user smi"; - snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + if (parent_bus) { + bus->read = ksz_parent_mdio_read; + bus->write = ksz_parent_mdio_write; + bus->name = "KSZ side MDIO"; + snprintf(bus->id, MII_BUS_ID_SIZE, "ksz-side-mdio-%d", + ds->index); + } else { + bus->read = ksz_sw_mdio_read; + bus->write = ksz_sw_mdio_write; + bus->name = "ksz user smi"; + if (ds->dst->index != 0) { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d-%d", ds->dst->index, ds->index); + } else { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + } + } + + ret = ksz_parse_dt_phy_config(dev, bus, mdio_np); + if (ret) + goto put_mdio_node; + + ds->phys_mii_mask = bus->phy_mask; bus->parent = ds->dev; - bus->phy_mask = ~ds->phys_mii_mask; ds->user_mii_bus = bus; if (dev->irq > 0) { ret = ksz_irq_phy_setup(dev); - if (ret) { - of_node_put(mdio_np); - return ret; - } + if (ret) + goto put_mdio_node; } ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np); @@ -2164,7 +2794,9 @@ static int ksz_mdio_register(struct ksz_device *dev) ksz_irq_phy_free(dev); } +put_mdio_node: of_node_put(mdio_np); + of_node_put(parent_bus_node); return ret; } @@ -2275,8 +2907,8 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) kirq->dev = dev; kirq->masked = ~0; - kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0, - &ksz_irq_domain_ops, kirq); + kirq->domain = irq_domain_create_simple(dev_fwnode(dev->dev), kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); if (!kirq->domain) return -ENOMEM; @@ -2320,8 +2952,8 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p) snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p); pirq->irq_num = irq_find_mapping(dev->girq.domain, p); - if (pirq->irq_num < 0) - return pirq->irq_num; + if (!pirq->irq_num) + return -EINVAL; return ksz_irq_common_setup(dev, pirq); } @@ -2331,6 +2963,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev); static int ksz_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + u16 storm_mask, storm_rate; struct dsa_port *dp; struct ksz_port *p; const u16 *regs; @@ -2353,11 +2986,21 @@ static int ksz_setup(struct dsa_switch *ds) if (ret) return ret; + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + /* set broadcast storm protection 10% rate */ + storm_mask = BROADCAST_STORM_RATE; + storm_rate = (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; + if (ksz_is_ksz8463(dev)) { + storm_mask = swab16(storm_mask); + storm_rate = swab16(storm_rate); + } regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], - BROADCAST_STORM_RATE, - (BROADCAST_STORM_VALUE * - BROADCAST_STORM_PROT_RATE) / 100); + storm_mask, storm_rate); dev->dev_ops->config_cpu_port(ds); @@ -2395,18 +3038,23 @@ static int ksz_setup(struct dsa_switch *ds) dsa_switch_for_each_user_port(dp, dev->ds) { ret = ksz_pirq_setup(dev, dp->index); if (ret) - goto out_girq; + goto port_release; - ret = ksz_ptp_irq_setup(ds, dp->index); - if (ret) - goto out_pirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_irq_setup(ds, dp->index); + if (ret) + goto pirq_release; + } } } - ret = ksz_ptp_clock_register(ds); - if (ret) { - dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret); - goto out_ptpirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_clock_register(ds); + if (ret) { + dev_err(dev->dev, "Failed to register PTP clock: %d\n", + ret); + goto port_release; + } } ret = ksz_mdio_register(dev); @@ -2426,18 +3074,18 @@ static int ksz_setup(struct dsa_switch *ds) return 0; out_ptp_clock_unregister: - ksz_ptp_clock_unregister(ds); -out_ptpirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) - ksz_ptp_irq_free(ds, dp->index); -out_pirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); +port_release: + if (dev->irq > 0) { + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); +pirq_release: ksz_irq_free(&dev->ports[dp->index].pirq); -out_girq: - if (dev->irq > 0) + } ksz_irq_free(&dev->girq); + } return ret; } @@ -2447,11 +3095,13 @@ static void ksz_teardown(struct dsa_switch *ds) struct ksz_device *dev = ds->priv; struct dsa_port *dp; - ksz_ptp_clock_unregister(ds); + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); if (dev->irq > 0) { dsa_switch_for_each_user_port(dp, dev->ds) { - ksz_ptp_irq_free(ds, dp->index); + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); ksz_irq_free(&dev->ports[dp->index].pirq); } @@ -2570,7 +3220,7 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) struct ksz_device *dev = ds->priv; switch (dev->chip_id) { - case KSZ8830_CHIP_ID: + case KSZ88X3_CHIP_ID: /* Silicon Errata Sheet (DS80000830A): * Port 1 does not work with LinkMD Cable-Testing. * Port 1 does not respond to received PAUSE control frames. @@ -2578,18 +3228,6 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) if (!port) return MICREL_KSZ8_P1_ERRATA; break; - case KSZ9477_CHIP_ID: - /* KSZ9477 Errata DS80000754C - * - * Module 4: Energy Efficient Ethernet (EEE) feature select must - * be manually disabled - * The EEE feature is enabled by default, but it is not fully - * operational. It must be manually disabled through register - * controls. If not disabled, the PHY ports can auto-negotiate - * to enable EEE, and this feature can cause link drops when - * linked to another device supporting EEE. - */ - return MICREL_NO_EEE; } return 0; @@ -2839,6 +3477,7 @@ static void ksz_port_teardown(struct dsa_switch *ds, int port) case KSZ9893_CHIP_ID: case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: if (dsa_is_user_port(ds, port)) ksz9477_port_acl_free(dev, port); } @@ -2882,12 +3521,11 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, struct ksz_device *dev = ds->priv; enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE; - if (dev->chip_id == KSZ8795_CHIP_ID || - dev->chip_id == KSZ8794_CHIP_ID || - dev->chip_id == KSZ8765_CHIP_ID) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) proto = DSA_TAG_PROTO_KSZ8795; - if (dev->chip_id == KSZ8830_CHIP_ID || + if (dev->chip_id == KSZ88X3_CHIP_ID || + dev->chip_id == KSZ8463_CHIP_ID || dev->chip_id == KSZ8563_CHIP_ID || dev->chip_id == KSZ9893_CHIP_ID || dev->chip_id == KSZ9563_CHIP_ID) @@ -2897,7 +3535,8 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, dev->chip_id == KSZ9477_CHIP_ID || dev->chip_id == KSZ9896_CHIP_ID || dev->chip_id == KSZ9897_CHIP_ID || - dev->chip_id == KSZ9567_CHIP_ID) + dev->chip_id == KSZ9567_CHIP_ID || + dev->chip_id == LAN9646_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9477; if (is_lan937x(dev)) @@ -2999,7 +3638,10 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; - case KSZ8830_CHIP_ID: + case KSZ8463_CHIP_ID: + case KSZ88X3_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8563_CHIP_ID: case KSZ8567_CHIP_ID: @@ -3014,63 +3656,74 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case LAN9372_CHIP_ID: case LAN9373_CHIP_ID: case LAN9374_CHIP_ID: + case LAN9646_CHIP_ID: return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; } return -EOPNOTSUPP; } -static int ksz_validate_eee(struct dsa_switch *ds, int port) +/** + * ksz_support_eee - Determine Energy Efficient Ethernet (EEE) support for a + * port + * @ds: Pointer to the DSA switch structure + * @port: Port number to check + * + * This function also documents devices where EEE was initially advertised but + * later withdrawn due to reliability issues, as described in official errata + * documents. These devices are explicitly listed to record known limitations, + * even if there is no technical necessity for runtime checks. + * + * Returns: true if the internal PHY on the given port supports fully + * operational EEE, false otherwise. + */ +static bool ksz_support_eee(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; if (!dev->info->internal_phy[port]) - return -EOPNOTSUPP; + return false; switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9893_CHIP_ID: + return true; case KSZ8567_CHIP_ID: + /* KSZ8567R Errata DS80000752C Module 4 */ + case KSZ8765_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8795_CHIP_ID: + /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ case KSZ9477_CHIP_ID: - case KSZ9563_CHIP_ID: + /* KSZ9477S Errata DS80000754A Module 4 */ case KSZ9567_CHIP_ID: - case KSZ9893_CHIP_ID: + /* KSZ9567S Errata DS80000756A Module 4 */ case KSZ9896_CHIP_ID: + /* KSZ9896C Errata DS80000757A Module 3 */ case KSZ9897_CHIP_ID: - return 0; + case LAN9646_CHIP_ID: + /* KSZ9897R Errata DS80000758C Module 4 */ + /* Energy Efficient Ethernet (EEE) feature select must be + * manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + * + * The same item appears in the errata for all switches above. + */ + break; } - return -EOPNOTSUPP; -} - -static int ksz_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_keee *e) -{ - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; - - /* There is no documented control of Tx LPI configuration. */ - e->tx_lpi_enabled = true; - - /* There is no documented control of Tx LPI timer. According to tests - * Tx LPI timer seems to be set by default to minimal value. - */ - e->tx_lpi_timer = 0; - - return 0; + return false; } static int ksz_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct ksz_device *dev = ds->priv; - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; if (!e->tx_lpi_enabled) { dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); @@ -3169,7 +3822,7 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) return interface; } -static void ksz8830_phylink_mac_config(struct phylink_config *config, +static void ksz88x3_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { @@ -3191,6 +3844,10 @@ static void ksz_phylink_mac_config(struct phylink_config *config, if (dev->info->internal_phy[port]) return; + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + if (phylink_autoneg_inband(mode)) { dev_err(dev->dev, "In-band AN not supported!\n"); return; @@ -3336,6 +3993,9 @@ static int ksz_switch_detect(struct ksz_device *dev) id2 = FIELD_GET(SW_CHIP_ID_M, id16); switch (id1) { + case KSZ84_FAMILY_ID: + dev->chip_id = KSZ8463_CHIP_ID; + break; case KSZ87_FAMILY_ID: if (id2 == KSZ87_CHIP_ID_95) { u8 val; @@ -3353,10 +4013,22 @@ static int ksz_switch_detect(struct ksz_device *dev) break; case KSZ88_FAMILY_ID: if (id2 == KSZ88_CHIP_ID_63) - dev->chip_id = KSZ8830_CHIP_ID; + dev->chip_id = KSZ88X3_CHIP_ID; else return -ENODEV; break; + case KSZ8895_FAMILY_ID: + if (id2 == KSZ8895_CHIP_ID_95 || + id2 == KSZ8895_CHIP_ID_95R) + dev->chip_id = KSZ8895_CHIP_ID; + else + return -ENODEV; + ret = ksz_read8(dev, REG_KSZ8864_CHIP_ID, &id4); + if (ret) + return ret; + if (id4 & SW_KSZ8864) + dev->chip_id = KSZ8864_CHIP_ID; + break; default: ret = ksz_read32(dev, REG_CHIP_ID0, &id32); if (ret) @@ -3376,7 +4048,10 @@ static int ksz_switch_detect(struct ksz_device *dev) case LAN9372_CHIP_ID: case LAN9373_CHIP_ID: case LAN9374_CHIP_ID: - dev->chip_id = id32; + + /* LAN9646 does not have its own chip id. */ + if (dev->chip_id != LAN9646_CHIP_ID) + dev->chip_id = id32; break; case KSZ9893_CHIP_ID: ret = ksz_read8(dev, REG_CHIP_ID4, @@ -3415,6 +4090,7 @@ static int ksz_cls_flower_add(struct dsa_switch *ds, int port, case KSZ9893_CHIP_ID: case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: return ksz9477_cls_flower_add(ds, port, cls, ingress); } @@ -3435,6 +4111,7 @@ static int ksz_cls_flower_del(struct dsa_switch *ds, int port, case KSZ9893_CHIP_ID: case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: return ksz9477_cls_flower_del(ds, port, cls, ingress); } @@ -3560,6 +4237,104 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, return p->bands - 1 - band; } +static u8 ksz8463_tc_ctrl(int port, int queue) +{ + u8 reg; + + reg = 0xC8 + port * 4; + reg += ((3 - queue) / 2) * 2; + reg++; + reg -= (queue & 1); + return reg; +} + +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) { int ret; @@ -3641,6 +4416,7 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) for (queue = 0; queue < dev->info->num_tx_queues; queue++) { ret = ksz_queue_set_wrr(dev, port, queue, KSZ9477_DEFAULT_WRR_WEIGHT); + if (ret) return ret; } @@ -3693,7 +4469,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (is_ksz8(dev)) + if (is_ksz8(dev) && !(ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -3707,9 +4483,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, if (ret) return ret; - return ksz_tc_ets_add(dev, port, &qopt->replace_params); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); case TC_ETS_DESTROY: - return ksz_tc_ets_del(dev, port); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); case TC_ETS_STATS: case TC_ETS_GRAFT: return -EOPNOTSUPP; @@ -3731,24 +4514,214 @@ static int ksz_setup_tc(struct dsa_switch *ds, int port, } } +/** + * ksz_handle_wake_reason - Handle wake reason on a specified port. + * @dev: The device structure. + * @port: The port number. + * + * This function reads the PME (Power Management Event) status register of a + * specified port to determine the wake reason. If there is no wake event, it + * returns early. Otherwise, it logs the wake reason which could be due to a + * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register + * is then cleared to acknowledge the handling of the wake event. + * + * Return: 0 on success, or an error code on failure. + */ +int ksz_handle_wake_reason(struct ksz_device *dev, int port) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_status; + int ret; + + ret = ops->pme_pread8(dev, port, regs[REG_PORT_PME_STATUS], + &pme_status); + if (ret) + return ret; + + if (!pme_status) + return 0; + + dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, + pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", + pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", + pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); + + return ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_STATUS], + pme_status); +} + +/** + * ksz_get_wol - Get Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function checks the device PME wakeup_source flag and chip_id. + * If enabled and supported, it sets the supported and active WoL + * flags. + */ static void ksz_get_wol(struct dsa_switch *ds, int port, struct ethtool_wolinfo *wol) { struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + u8 pme_ctrl; + int ret; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + wol->supported = WAKE_PHY; - if (dev->dev_ops->get_wol) - dev->dev_ops->get_wol(dev, port, wol); + /* Check if the current MAC address on this port can be set + * as global for WAKE_MAGIC support. The result may vary + * dynamically based on other ports configurations. + */ + if (ksz_is_port_mac_global_usable(dev->ds, port)) + wol->supported |= WAKE_MAGIC; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl); + if (ret) + return; + + if (pme_ctrl & PME_WOL_MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) + wol->wolopts |= WAKE_PHY; } +/** + * ksz_set_wol - Set Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function configures Wake-on-LAN (WoL) settings for a specified + * port. It validates the provided WoL options, checks if PME is + * enabled and supported, clears any previous wake reasons, and sets + * the Magic Packet flag in the port's PME control register if + * specified. + * + * Return: 0 on success, or other error codes on failure. + */ static int ksz_set_wol(struct dsa_switch *ds, int port, struct ethtool_wolinfo *wol) { + u8 pme_ctrl = 0, pme_ctrl_old = 0; struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + bool magic_switched_off; + bool magic_switched_on; + int ret; - if (dev->dev_ops->set_wol) - return dev->dev_ops->set_wol(dev, port, wol); + if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; - return -EOPNOTSUPP; + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return -EOPNOTSUPP; + + if (!dev->wakeup_source) + return -EOPNOTSUPP; + + ret = ksz_handle_wake_reason(dev, port); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + pme_ctrl |= PME_WOL_MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl_old); + if (ret) + return ret; + + if (pme_ctrl_old == pme_ctrl) + return 0; + + magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && + !(pme_ctrl & PME_WOL_MAGICPKT); + magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && + (pme_ctrl & PME_WOL_MAGICPKT); + + /* To keep reference count of MAC address, we should do this + * operation only on change of WOL settings. + */ + if (magic_switched_on) { + ret = ksz_switch_macaddr_get(dev->ds, port, NULL); + if (ret) + return ret; + } else if (magic_switched_off) { + ksz_switch_macaddr_put(dev->ds); + } + + ret = dev->dev_ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], + pme_ctrl); + if (ret) { + if (magic_switched_on) + ksz_switch_macaddr_put(dev->ds); + return ret; + } + + return 0; +} + +/** + * ksz_wol_pre_shutdown - Prepares the switch device for shutdown while + * considering Wake-on-LAN (WoL) settings. + * @dev: The switch device structure. + * @wol_enabled: Pointer to a boolean which will be set to true if WoL is + * enabled on any port. + * + * This function prepares the switch device for a safe shutdown while taking + * into account the Wake-on-LAN (WoL) settings on the user ports. It updates + * the wol_enabled flag accordingly to reflect whether WoL is active on any + * port. + */ +static void ksz_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_pin_en = PME_ENABLE; + struct dsa_port *dp; + int ret; + + *wol_enabled = false; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + dsa_switch_for_each_user_port(dp, dev->ds) { + u8 pme_ctrl = 0; + + ret = ops->pme_pread8(dev, dp->index, + regs[REG_PORT_PME_CTRL], &pme_ctrl); + if (!ret && pme_ctrl) + *wol_enabled = true; + + /* make sure there are no pending wake events which would + * prevent the device from going to sleep/shutdown. + */ + ksz_handle_wake_reason(dev, dp->index); + } + + /* Now we are save to enable PME pin. */ + if (*wol_enabled) { + if (dev->pme_active_high) + pme_pin_en |= PME_POLARITY; + ops->pme_write8(dev, regs[REG_SW_PME_CTRL], pme_pin_en); + if (ksz_is_ksz87xx(dev)) + ksz_write8(dev, KSZ87XX_REG_INT_EN, KSZ87XX_INT_PME_MASK); + } } static int ksz_port_set_mac_address(struct dsa_switch *ds, int port, @@ -3764,6 +4737,11 @@ static int ksz_port_set_mac_address(struct dsa_switch *ds, int port, return -EBUSY; } + /* Need to initialize variable as the code to fill in settings may + * not be executed. + */ + wol.wolopts = 0; + ksz_get_wol(ds, dp->index, &wol); if (wol.wolopts & WAKE_MAGIC) { dev_err(ds->dev, @@ -3854,7 +4832,16 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, /* Program the switch MAC address to hardware */ for (i = 0; i < ETH_ALEN; i++) { - ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]); + if (ksz_is_ksz8463(dev)) { + u16 addr16 = ((u16)addr[i] << 8) | addr[i + 1]; + + ret = ksz_write16(dev, regs[REG_SW_MAC_ADDR] + i, + addr16); + i++; + } else { + ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, + addr[i]); + } if (ret) goto macaddr_drop; } @@ -3956,6 +4943,23 @@ static int ksz_hsr_leave(struct dsa_switch *ds, int port, return 0; } +static int ksz_suspend(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + cancel_delayed_work_sync(&dev->mib_read); + return 0; +} + +static int ksz_resume(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + if (dev->mib_read_interval) + schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); + return 0; +} + static const struct dsa_switch_ops ksz_switch_ops = { .get_tag_protocol = ksz_get_tag_protocol, .connect_tag_protocol = ksz_connect_tag_protocol, @@ -3996,6 +5000,8 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_max_mtu = ksz_max_mtu, .get_wol = ksz_get_wol, .set_wol = ksz_set_wol, + .suspend = ksz_suspend, + .resume = ksz_resume, .get_ts_info = ksz_get_ts_info, .port_hwtstamp_get = ksz_hwtstamp_get, .port_hwtstamp_set = ksz_hwtstamp_set, @@ -4004,7 +5010,7 @@ static const struct dsa_switch_ops ksz_switch_ops = { .cls_flower_add = ksz_cls_flower_add, .cls_flower_del = ksz_cls_flower_del, .port_setup_tc = ksz_setup_tc, - .get_mac_eee = ksz_get_mac_eee, + .support_eee = ksz_support_eee, .set_mac_eee = ksz_set_mac_eee, .port_get_default_prio = ksz_port_get_default_prio, .port_set_default_prio = ksz_port_set_default_prio, @@ -4056,8 +5062,7 @@ void ksz_switch_shutdown(struct ksz_device *dev) { bool wol_enabled = false; - if (dev->dev_ops->wol_pre_shutdown) - dev->dev_ops->wol_pre_shutdown(dev, &wol_enabled); + ksz_wol_pre_shutdown(dev, &wol_enabled); if (dev->dev_ops->reset && !wol_enabled) dev->dev_ops->reset(dev); @@ -4221,24 +5226,24 @@ static int ksz9477_drive_strength_write(struct ksz_device *dev, } /** - * ksz8830_drive_strength_write() - Set the drive strength configuration for - * KSZ8830 compatible chip variants. + * ksz88x3_drive_strength_write() - Set the drive strength configuration for + * KSZ8863 compatible chip variants. * @dev: ksz device * @props: Array of drive strength properties to be set * @num_props: Number of properties in the array * - * This function applies the specified drive strength settings to KSZ8830 chip + * This function applies the specified drive strength settings to KSZ88X3 chip * variants (KSZ8873, KSZ8863). * It ensures the configurations align with what the chip variant supports and * warns or errors out on unsupported settings. * * Return: 0 on success, error code otherwise */ -static int ksz8830_drive_strength_write(struct ksz_device *dev, +static int ksz88x3_drive_strength_write(struct ksz_device *dev, struct ksz_driver_strength_prop *props, int num_props) { - size_t array_size = ARRAY_SIZE(ksz8830_drive_strengths); + size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths); int microamp; int i, ret; @@ -4251,10 +5256,10 @@ static int ksz8830_drive_strength_write(struct ksz_device *dev, } microamp = props[KSZ_DRIVER_STRENGTH_IO].value; - ret = ksz_drive_strength_to_reg(ksz8830_drive_strengths, array_size, + ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size, microamp); if (ret < 0) { - ksz_drive_strength_error(dev, ksz8830_drive_strengths, + ksz_drive_strength_error(dev, ksz88x3_drive_strengths, array_size, microamp); return ret; } @@ -4314,8 +5319,8 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) return 0; switch (dev->chip_id) { - case KSZ8830_CHIP_ID: - return ksz8830_drive_strength_write(dev, of_props, + case KSZ88X3_CHIP_ID: + return ksz88x3_drive_strength_write(dev, of_props, ARRAY_SIZE(of_props)); case KSZ8795_CHIP_ID: case KSZ8794_CHIP_ID: @@ -4328,6 +5333,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) case KSZ9893_CHIP_ID: case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: return ksz9477_drive_strength_write(dev, of_props, ARRAY_SIZE(of_props)); default: @@ -4343,10 +5349,42 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) return 0; } +static int ksz8463_configure_straps_spi(struct ksz_device *dev) +{ + struct pinctrl *pinctrl; + struct gpio_desc *rxd0; + struct gpio_desc *rxd1; + + rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW); + if (IS_ERR(rxd0)) + return PTR_ERR(rxd0); + + rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH); + if (IS_ERR(rxd1)) + return PTR_ERR(rxd1); + + if (!rxd0 && !rxd1) + return 0; + + if ((rxd0 && !rxd1) || (rxd1 && !rxd0)) + return -EINVAL; + + pinctrl = devm_pinctrl_get_select(dev->dev, "reset"); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + + return 0; +} + +static int ksz8463_release_straps_spi(struct ksz_device *dev) +{ + return pinctrl_select_default_state(dev->dev); +} + int ksz_switch_register(struct ksz_device *dev) { const struct ksz_chip_data *info; - struct device_node *port, *ports; + struct device_node *ports; phy_interface_t interface; unsigned int port_num; int ret; @@ -4358,10 +5396,22 @@ int ksz_switch_register(struct ksz_device *dev) return PTR_ERR(dev->reset_gpio); if (dev->reset_gpio) { + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_configure_straps_spi(dev); + if (ret) + return ret; + } + gpiod_set_value_cansleep(dev->reset_gpio, 1); usleep_range(10000, 12000); gpiod_set_value_cansleep(dev->reset_gpio, 0); msleep(100); + + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_release_straps_spi(dev); + if (ret) + return ret; + } } mutex_init(&dev->dev_mutex); @@ -4432,12 +5482,11 @@ int ksz_switch_register(struct ksz_device *dev) if (!ports) ports = of_get_child_by_name(dev->dev->of_node, "ports"); if (ports) { - for_each_available_child_of_node(ports, port) { + for_each_available_child_of_node_scoped(ports, port) { if (of_property_read_u32(port, "reg", &port_num)) continue; if (!(dev->port_mask & BIT(port_num))) { - of_node_put(port); of_node_put(ports); return -EINVAL; } @@ -4445,6 +5494,9 @@ int ksz_switch_register(struct ksz_device *dev) &dev->ports[port_num].interface); ksz_parse_rgmii_delay(dev, port_num, port); + dev->ports[port_num].fiber = + of_property_read_bool(port, + "micrel,fiber-mode"); } of_node_put(ports); } @@ -4459,6 +5511,8 @@ int ksz_switch_register(struct ksz_device *dev) dev->wakeup_source = of_property_read_bool(dev->dev->of_node, "wakeup-source"); + dev->pme_active_high = of_property_read_bool(dev->dev->of_node, + "microchip,pme-active-high"); } ret = dsa_register_switch(dev->ds); @@ -4494,6 +5548,24 @@ void ksz_switch_remove(struct ksz_device *dev) } EXPORT_SYMBOL(ksz_switch_remove); +#ifdef CONFIG_PM_SLEEP +int ksz_switch_suspend(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_suspend(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_suspend); + +int ksz_switch_resume(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_resume(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_resume); +#endif + MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 5f0a628b9849..c65188cd3c0a 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip switch driver common header * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ_COMMON_H @@ -10,6 +10,7 @@ #include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/mutex.h> +#include <linux/pcs/pcs-xpcs.h> #include <linux/phy.h> #include <linux/regmap.h> #include <net/dsa.h> @@ -65,6 +66,12 @@ struct ksz_chip_data { u8 num_tx_queues; u8 num_ipms; /* number of Internal Priority Maps */ bool tc_cbs_supported; + + /** + * @phy_side_mdio_supported: Indicates if the chip supports an additional + * side MDIO channel for accessing integrated PHYs. + */ + bool phy_side_mdio_supported; const struct ksz_dev_ops *ops; const struct phylink_mac_ops *phylink_mac_ops; bool phy_errata_9477; @@ -86,6 +93,8 @@ struct ksz_chip_data { bool supports_rgmii[KSZ_MAX_NUM_PORTS]; bool internal_phy[KSZ_MAX_NUM_PORTS]; bool gbit_capable[KSZ_MAX_NUM_PORTS]; + bool ptp_capable; + u8 sgmii_port; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; }; @@ -125,6 +134,7 @@ struct ksz_port { u32 force:1; u32 read:1; /* read MIB counters in background */ u32 freeze:1; /* MIB counter freeze is enabled */ + u32 sgmii_adv_write:1; struct ksz_port_mib mib; phy_interface_t interface; @@ -134,8 +144,9 @@ struct ksz_port { void *acl_priv; struct ksz_irq pirq; u8 num; + struct phylink_pcs *pcs; #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP) - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; bool hwts_tx_en; bool hwts_rx_en; struct ksz_irq ptpirq; @@ -174,6 +185,7 @@ struct ksz_device { bool synclko_125; bool synclko_disable; bool wakeup_source; + bool pme_active_high; struct vlan_table *vlan_cache; @@ -190,16 +202,35 @@ struct ksz_device { struct ksz_switch_macaddr *switch_macaddr; struct net_device *hsr_dev; /* HSR */ u8 hsr_ports; + + /** + * @phy_addr_map: Array mapping switch ports to their corresponding PHY + * addresses. + */ + u8 phy_addr_map[KSZ_MAX_NUM_PORTS]; + + /** + * @parent_mdio_bus: Pointer to the external MDIO bus controller. + * + * This points to an external MDIO bus controller that is used to access + * the PHYs integrated within the switch. Unlike an integrated MDIO + * bus, this external controller provides a direct path for managing + * the switch’s internal PHYs, bypassing the main SPI interface. + */ + struct mii_bus *parent_mdio_bus; }; /* List of supported models */ enum ksz_model { + KSZ8463, KSZ8563, KSZ8567, KSZ8795, KSZ8794, KSZ8765, - KSZ8830, + KSZ88X3, + KSZ8864, + KSZ8895, KSZ9477, KSZ9896, KSZ9897, @@ -211,6 +242,7 @@ enum ksz_model { LAN9372, LAN9373, LAN9374, + LAN9646, }; enum ksz_regs { @@ -235,6 +267,9 @@ enum ksz_regs { S_MULTICAST_CTRL, P_XMII_CTRL_0, P_XMII_CTRL_1, + REG_SW_PME_CTRL, + REG_PORT_PME_STATUS, + REG_PORT_PME_CTRL, }; enum ksz_masks { @@ -259,6 +294,8 @@ enum ksz_masks { DYNAMIC_MAC_TABLE_TIMESTAMP, ALU_STAT_WRITE, ALU_STAT_READ, + ALU_STAT_DIRECT, + ALU_RESV_MCAST_ADDR, P_MII_TX_FLOW_CTRL, P_MII_RX_FLOW_CTRL, }; @@ -320,6 +357,43 @@ struct ksz_dev_ops { void (*port_cleanup)(struct ksz_device *dev, int port); void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port); int (*set_ageing_time)(struct ksz_device *dev, unsigned int msecs); + + /** + * @mdio_bus_preinit: Function pointer to pre-initialize the MDIO bus + * for accessing PHYs. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is used to configure the MDIO bus for PHY + * access before initiating regular PHY operations. It enables either + * SPI/I2C or side MDIO access modes by unlocking necessary registers + * and setting up access permissions for the selected mode. + * + * Return: + * - 0 on success. + * - Negative error code on failure. + */ + int (*mdio_bus_preinit)(struct ksz_device *dev, bool side_mdio); + + /** + * @create_phy_addr_map: Function pointer to create a port-to-PHY + * address map. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is responsible for mapping switch ports to PHY + * addresses according to the configured access mode (SPI or side MDIO) + * and the device’s strap configuration. The mapping setup may vary + * depending on the chip variant and configuration. Ensures the correct + * address mapping for PHY communication. + * + * Return: + * - 0 on success. + * - Negative error code on failure (e.g., invalid configuration). + */ + int (*create_phy_addr_map)(struct ksz_device *dev, bool side_mdio); int (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); int (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val); void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr, @@ -354,6 +428,11 @@ struct ksz_dev_ops { void (*get_caps)(struct ksz_device *dev, int port, struct phylink_config *config); int (*change_mtu)(struct ksz_device *dev, int port, int mtu); + int (*pme_write8)(struct ksz_device *dev, u32 reg, u8 value); + int (*pme_pread8)(struct ksz_device *dev, int port, int offset, + u8 *data); + int (*pme_pwrite8)(struct ksz_device *dev, int port, int offset, + u8 data); void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze); void (*port_init_cnt)(struct ksz_device *dev, int port); void (*phylink_mac_link_up)(struct ksz_device *dev, int port, @@ -363,21 +442,20 @@ struct ksz_dev_ops { int duplex, bool tx_pause, bool rx_pause); void (*setup_rgmii_delay)(struct ksz_device *dev, int port); int (*tc_cbs_set_cinc)(struct ksz_device *dev, int port, u32 val); - void (*get_wol)(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); - int (*set_wol)(struct ksz_device *dev, int port, - struct ethtool_wolinfo *wol); - void (*wol_pre_shutdown)(struct ksz_device *dev, bool *wol_enabled); void (*config_cpu_port)(struct dsa_switch *ds); int (*enable_stp_addr)(struct ksz_device *dev); int (*reset)(struct ksz_device *dev); int (*init)(struct ksz_device *dev); void (*exit)(struct ksz_device *dev); + + int (*pcs_create)(struct ksz_device *dev); }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv); int ksz_switch_register(struct ksz_device *dev); void ksz_switch_remove(struct ksz_device *dev); +int ksz_switch_suspend(struct device *dev); +int ksz_switch_resume(struct device *dev); void ksz_init_mib_timer(struct ksz_device *dev); bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port); @@ -391,6 +469,7 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, struct netlink_ext_ack *extack); void ksz_switch_macaddr_put(struct dsa_switch *ds); void ksz_switch_shutdown(struct ksz_device *dev); +int ksz_handle_wake_reason(struct ksz_device *dev, int port); /* Common register access functions */ static inline struct regmap *ksz_regmap_8(struct ksz_device *dev) @@ -408,6 +487,11 @@ static inline struct regmap *ksz_regmap_32(struct ksz_device *dev) return dev->regmap[KSZ_REGMAP_32]; } +static inline bool ksz_is_ksz8463(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8463_CHIP_ID; +} + static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val) { unsigned int value; @@ -621,12 +705,30 @@ static inline bool ksz_is_ksz87xx(struct ksz_device *dev) static inline bool ksz_is_ksz88x3(struct ksz_device *dev) { - return dev->chip_id == KSZ8830_CHIP_ID; + return dev->chip_id == KSZ88X3_CHIP_ID; +} + +static inline bool ksz_is_8895_family(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8895_CHIP_ID || + dev->chip_id == KSZ8864_CHIP_ID; } static inline bool is_ksz8(struct ksz_device *dev) { - return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev); + return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev) || + ksz_is_8895_family(dev) || ksz_is_ksz8463(dev); +} + +static inline bool is_ksz88xx(struct ksz_device *dev) +{ + return ksz_is_ksz88x3(dev) || ksz_is_8895_family(dev) || + ksz_is_ksz8463(dev); +} + +static inline bool is_ksz9477(struct ksz_device *dev) +{ + return dev->chip_id == KSZ9477_CHIP_ID; } static inline int is_lan937x(struct ksz_device *dev) @@ -644,6 +746,21 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) dev->chip_id == LAN9372_CHIP_ID) && port == KSZ_PORT_4; } +static inline int ksz_get_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port - 1; +} + +static inline bool ksz_has_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port > 0; +} + +static inline bool ksz_is_sgmii_port(struct ksz_device *dev, int port) +{ + return dev->info->sgmii_port == port + 1; +} + /* STP State Defines */ #define PORT_TX_ENABLE BIT(2) #define PORT_RX_ENABLE BIT(1) @@ -653,8 +770,10 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define REG_CHIP_ID0 0x00 #define SW_FAMILY_ID_M GENMASK(15, 8) +#define KSZ84_FAMILY_ID 0x84 #define KSZ87_FAMILY_ID 0x87 #define KSZ88_FAMILY_ID 0x88 +#define KSZ8895_FAMILY_ID 0x95 #define KSZ8_PORT_STATUS_0 0x08 #define KSZ8_PORT_FIBER_MODE BIT(7) @@ -663,6 +782,12 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define KSZ87_CHIP_ID_94 0x6 #define KSZ87_CHIP_ID_95 0x9 #define KSZ88_CHIP_ID_63 0x3 +#define KSZ8895_CHIP_ID_95 0x4 +#define KSZ8895_CHIP_ID_95R 0x6 + +/* KSZ8895 specific register */ +#define REG_KSZ8864_CHIP_ID 0xFE +#define SW_KSZ8864 BIT(7) #define SW_REV_ID_M GENMASK(7, 4) @@ -695,6 +820,17 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define P_MII_MAC_MODE BIT(2) #define P_MII_SEL_M 0x3 +/* KSZ9477, KSZ87xx Wake-on-LAN (WoL) masks */ +#define PME_WOL_MAGICPKT BIT(2) +#define PME_WOL_LINKUP BIT(1) +#define PME_WOL_ENERGY BIT(0) + +#define PME_ENABLE BIT(1) +#define PME_POLARITY BIT(0) + +#define KSZ87XX_REG_INT_EN 0x7D +#define KSZ87XX_INT_PME_MASK BIT(4) + /* Interrupt */ #define REG_SW_PORT_INT_STATUS__1 0x001B #define REG_SW_PORT_INT_MASK__1 0x001F @@ -731,6 +867,25 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define SW_HI_SPEED_DRIVE_STRENGTH_S 4 #define SW_LO_SPEED_DRIVE_STRENGTH_S 0 +/* TXQ Split Control Register for per-port, per-queue configuration. + * Register 0xAF is TXQ Split for Q3 on Port 1. + * Register offset formula: 0xAF + (port * 4) + (3 - queue) + * where: port = 0..2, queue = 0..3 + */ +#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \ + (0xAF + ((port) * 4) + (3 - (queue))) + +/* Bit 7 selects between: + * 0 = Strict priority mode (highest-priority queue first) + * 1 = Weighted Fair Queuing (WFQ) mode: + * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1 + * If any queues are empty, weight is redistributed. + * + * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873 + * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs. + */ +#define KSZ8873_TXQ_WFQ_ENABLE BIT(7) + #define KSZ9477_REG_PORT_OUT_RATE_0 0x0420 #define KSZ9477_OUT_RATE_NO_LIMIT 0 @@ -794,4 +949,29 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) [KSZ_REGMAP_32] = KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \ } +#define KSZ8463_REGMAP_ENTRY(width, regbits, regpad, regalign) \ + { \ + .name = #width, \ + .val_bits = (width), \ + .reg_stride = (width / 8), \ + .reg_bits = (regbits) + (regalign), \ + .pad_bits = (regpad), \ + .read = ksz8463_spi_read, \ + .write = ksz8463_spi_write, \ + .max_register = BIT(regbits) - 1, \ + .cache_type = REGCACHE_NONE, \ + .zero_flag_mask = 1, \ + .use_single_read = 1, \ + .use_single_write = 1, \ + .lock = ksz_regmap_lock, \ + .unlock = ksz_regmap_unlock, \ + } + +#define KSZ8463_REGMAP_TABLE(ksz, regbits, regpad, regalign) \ + static const struct regmap_config ksz##_regmap_config[] = { \ + [KSZ_REGMAP_8] = KSZ8463_REGMAP_ENTRY(8, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_16] = KSZ8463_REGMAP_ENTRY(16, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_32] = KSZ8463_REGMAP_ENTRY(32, (regbits), (regpad), (regalign)), \ + } + #endif diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c index 086bc9b3cf53..7131c5caac54 100644 --- a/drivers/net/dsa/microchip/ksz_dcb.c +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -10,11 +10,18 @@ #include "ksz_dcb.h" #include "ksz8.h" -#define KSZ8_REG_PORT_1_CTRL_0 0x10 +/* Port X Control 0 register. + * The datasheet specifies: Port 1 - 0x10, Port 2 - 0x20, Port 3 - 0x30. + * However, the driver uses get_port_addr(), which maps Port 1 to offset 0. + * Therefore, we define the base offset as 0x00 here to align with that logic. + */ +#define KSZ8_REG_PORT_1_CTRL_0 0x00 +#define KSZ8463_REG_PORT_1_CTRL_0 0x6C #define KSZ8_PORT_DIFFSERV_ENABLE BIT(6) #define KSZ8_PORT_802_1P_ENABLE BIT(5) #define KSZ8_PORT_BASED_PRIO_M GENMASK(4, 3) +#define KSZ8463_REG_TOS_DSCP_CTRL 0x16 #define KSZ88X3_REG_TOS_DSCP_CTRL 0x60 #define KSZ8765_REG_TOS_DSCP_CTRL 0x90 @@ -93,6 +100,8 @@ static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, *reg = KSZ8_REG_PORT_1_CTRL_0; *mask = KSZ8_PORT_BASED_PRIO_M; *shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; } else { *reg = KSZ9477_REG_PORT_MRI_MAC_CTRL; *mask = KSZ9477_PORT_BASED_PRIO_M; @@ -113,14 +122,16 @@ static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg, int *per_reg, u8 *mask) { - if (ksz_is_ksz87xx(dev)) { + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) { *reg = KSZ8765_REG_TOS_DSCP_CTRL; *per_reg = 4; *mask = GENMASK(1, 0); - } else if (ksz_is_ksz88x3(dev)) { + } else if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { *reg = KSZ88X3_REG_TOS_DSCP_CTRL; *per_reg = 4; *mask = GENMASK(1, 0); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_TOS_DSCP_CTRL; } else { *reg = KSZ9477_REG_DIFFSERV_PRIO_MAP; *per_reg = 2; @@ -146,6 +157,8 @@ static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev, *map = ksz8_apptrust_map_to_bit; *reg = KSZ8_REG_PORT_1_CTRL_0; *mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE; + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; } else { *map = ksz9477_apptrust_map_to_bit; *reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL; @@ -182,49 +195,6 @@ int ksz_port_get_default_prio(struct dsa_switch *ds, int port) } /** - * ksz88x3_port_set_default_prio_quirks - Quirks for default priority - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the default priority - * @prio: Priority value to set - * - * This function implements quirks for setting the default priority on KSZ88x3 - * devices. On Port 2, no other priority providers are working - * except of PCP. So, configuring default priority on Port 2 is not possible. - * On Port 1, it is not possible to configure port priority if PCP - * apptrust on Port 2 is disabled. Since we disable multiple queues on the - * switch to disable PCP on Port 2, we need to ensure that the default priority - * configuration on Port 1 is in agreement with the configuration on Port 2. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port, - u8 prio) -{ - if (!prio) - return 0; - - if (port == KSZ_PORT_2) { - dev_err(dev->dev, "Port priority configuration is not working on Port 2\n"); - return -EINVAL; - } else if (port == KSZ_PORT_1) { - u8 port2_data; - int ret; - - ret = ksz_pread8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0, - &port2_data); - if (ret) - return ret; - - if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) { - dev_err(dev->dev, "Not possible to configure port priority on Port 1 if PCP apptrust on Port 2 is disabled\n"); - return -EINVAL; - } - } - - return 0; -} - -/** * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ * switch * @ds: Pointer to the DSA switch structure @@ -239,18 +209,12 @@ static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio) { struct ksz_device *dev = ds->priv; - int reg, shift, ret; + int reg, shift; u8 mask; if (prio >= dev->info->num_ipms) return -EINVAL; - if (ksz_is_ksz88x3(dev)) { - ret = ksz88x3_port_set_default_prio_quirks(dev, port, prio); - if (ret) - return ret; - } - ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask); @@ -519,155 +483,6 @@ err_sel_not_vaild: } /** - * ksz88x3_port1_apptrust_quirk - Quirk for apptrust configuration on Port 1 - * of KSZ88x3 devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @port1_data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on Port 1 of - * KSZ88x3 devices. It ensures that apptrust configuration on Port 1 is not - * possible if PCP apptrust on Port 2 is disabled. This is because the Port 2 - * seems to be permanently hardwired to PCP classification, so we need to - * do Port 1 configuration always in agreement with Port 2 configuration. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port1_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 port1_data) -{ - u8 port2_data; - int ret; - - /* If no apptrust is requested for Port 1, no need to care about Port 2 - * configuration. - */ - if (!(port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE))) - return 0; - - /* We got request to enable any apptrust on Port 1. To make it possible, - * we need to enable multiple queues on the switch. If we enable - * multiqueue support, PCP classification on Port 2 will be - * automatically activated by HW. - */ - ret = ksz_pread8(dev, KSZ_PORT_2, reg, &port2_data); - if (ret) - return ret; - - /* If KSZ8_PORT_802_1P_ENABLE bit is set on Port 2, the driver showed - * the interest in PCP classification on Port 2. In this case, - * multiqueue support is enabled and we can enable any apptrust on - * Port 1. - * If KSZ8_PORT_802_1P_ENABLE bit is not set on Port 2, the PCP - * classification on Port 2 is still active, but the driver disabled - * multiqueue support and made frame prioritization inactive for - * all ports. In this case, we can't enable any apptrust on Port 1. - */ - if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) { - dev_err(dev->dev, "Not possible to enable any apptrust on Port 1 if PCP apptrust on Port 2 is disabled\n"); - return -EINVAL; - } - - return 0; -} - -/** - * ksz88x3_port2_apptrust_quirk - Quirk for apptrust configuration on Port 2 - * of KSZ88x3 devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @port2_data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on Port 2 of - * KSZ88x3 devices. It ensures that DSCP apptrust is not working on Port 2 and - * that it is not possible to disable PCP on Port 2. The only way to disable PCP - * on Port 2 is to disable multiple queues on the switch. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port2_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 port2_data) -{ - struct dsa_switch *ds = dev->ds; - u8 port1_data; - int ret; - - /* First validate Port 2 configuration. DiffServ/DSCP is not working - * on this port. - */ - if (port2_data & KSZ8_PORT_DIFFSERV_ENABLE) { - dev_err(dev->dev, "DSCP apptrust is not working on Port 2\n"); - return -EINVAL; - } - - /* If PCP support is requested, we need to enable all queues on the - * switch to make PCP priority working on Port 2. - */ - if (port2_data & KSZ8_PORT_802_1P_ENABLE) - return ksz8_all_queues_split(dev, dev->info->num_tx_queues); - - /* We got request to disable PCP priority on Port 2. - * Now, we need to compare Port 2 configuration with Port 1 - * configuration. - */ - ret = ksz_pread8(dev, KSZ_PORT_1, reg, &port1_data); - if (ret) - return ret; - - /* If Port 1 has any apptrust enabled, we can't disable multiple queues - * on the switch, so we can't disable PCP on Port 2. - */ - if (port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)) { - dev_err(dev->dev, "Not possible to disable PCP on Port 2 if any apptrust is enabled on Port 1\n"); - return -EINVAL; - } - - /* Now we need to ensure that default priority on Port 1 is set to 0 - * otherwise we can't disable multiqueue support on the switch. - */ - ret = ksz_port_get_default_prio(ds, KSZ_PORT_1); - if (ret < 0) { - return ret; - } else if (ret) { - dev_err(dev->dev, "Not possible to disable PCP on Port 2 if non zero default priority is set on Port 1\n"); - return -EINVAL; - } - - /* Port 1 has no apptrust or default priority set and we got request to - * disable PCP on Port 2. We can disable multiqueue support to disable - * PCP on Port 2. - */ - return ksz8_all_queues_split(dev, 1); -} - -/** - * ksz88x3_port_apptrust_quirk - Quirk for apptrust configuration on KSZ88x3 - * devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on KSZ88x3 - * devices. It ensures that apptrust configuration on Port 1 and - * Port 2 is done in agreement with each other. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 data) -{ - if (port == KSZ_PORT_1) - return ksz88x3_port1_apptrust_quirk(dev, port, reg, data); - else if (port == KSZ_PORT_2) - return ksz88x3_port2_apptrust_quirk(dev, port, reg, data); - - return 0; -} - -/** * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ * switch * @ds: Pointer to the DSA switch structure @@ -707,12 +522,6 @@ int ksz_port_set_apptrust(struct dsa_switch *ds, int port, } } - if (ksz_is_ksz88x3(dev)) { - ret = ksz88x3_port_apptrust_quirk(dev, port, reg, data); - if (ret) - return ret; - } - return ksz_prmw8(dev, port, reg, mask, data); } @@ -799,21 +608,5 @@ int ksz_dcb_init_port(struct ksz_device *dev, int port) */ int ksz_dcb_init(struct ksz_device *dev) { - int ret; - - ret = ksz_init_global_dscp_map(dev); - if (ret) - return ret; - - /* Enable 802.1p priority control on Port 2 during switch initialization. - * This setup is critical for the apptrust functionality on Port 1, which - * relies on the priority settings of Port 2. Note: Port 1 is naturally - * configured before Port 2, necessitating this configuration order. - */ - if (ksz_is_ksz88x3(dev)) - return ksz_prmw8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0, - KSZ8_PORT_802_1P_ENABLE, - KSZ8_PORT_802_1P_ENABLE); - - return 0; + return ksz_init_global_dscp_map(dev); } diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index 1fe105913c75..997e4a76d0a6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -266,7 +266,6 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) struct ksz_port *prt; struct dsa_port *dp; bool tag_en = false; - int ret; dsa_switch_for_each_user_port(dp, dev->ds) { prt = &dev->ports[dp->index]; @@ -277,9 +276,7 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) } if (tag_en) { - ret = ptp_schedule_worker(ptp_data->clock, 0); - if (ret) - return ret; + ptp_schedule_worker(ptp_data->clock, 0); } else { ptp_cancel_worker_sync(ptp_data->clock); } @@ -293,7 +290,7 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) /* The function is return back the capability of timestamping feature when * requested through ethtool -T <interface> utility */ -int ksz_get_ts_info(struct dsa_switch *ds, int port, struct ethtool_ts_info *ts) +int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_info *ts) { struct ksz_device *dev = ds->priv; struct ksz_ptp_data *ptp_data; @@ -322,22 +319,21 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port, struct ethtool_ts_info *ts) return 0; } -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config *config; struct ksz_port *prt; prt = &dev->ports[port]; - config = &prt->tstamp_config; + *config = prt->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } static int ksz_set_hwtstamp_config(struct ksz_device *dev, struct ksz_port *prt, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { int ret; @@ -407,26 +403,21 @@ static int ksz_set_hwtstamp_config(struct ksz_device *dev, return ksz_ptp_enable_mode(dev); } -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config config; struct ksz_port *prt; int ret; prt = &dev->ports[port]; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - ret = ksz_set_hwtstamp_config(dev, prt, &config); + ret = ksz_set_hwtstamp_config(dev, prt, config); if (ret) return ret; - memcpy(&prt->tstamp_config, &config, sizeof(config)); - - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + prt->tstamp_config = *config; return 0; } @@ -1102,18 +1093,18 @@ static int ksz_ptp_msg_irq_setup(struct ksz_port *port, u8 n) static const char * const name[] = {"pdresp-msg", "xdreq-msg", "sync-msg"}; const struct ksz_dev_ops *ops = port->ksz_dev->dev_ops; + struct ksz_irq *ptpirq = &port->ptpirq; struct ksz_ptp_irq *ptpmsg_irq; ptpmsg_irq = &port->ptpmsg_irq[n]; + ptpmsg_irq->num = irq_create_mapping(ptpirq->domain, n); + if (!ptpmsg_irq->num) + return -EINVAL; ptpmsg_irq->port = port; ptpmsg_irq->ts_reg = ops->get_port_addr(port->num, ts_reg[n]); - snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]); - - ptpmsg_irq->num = irq_find_mapping(port->ptpirq.domain, n); - if (ptpmsg_irq->num < 0) - return ptpmsg_irq->num; + strscpy(ptpmsg_irq->name, name[n]); return request_threaded_irq(ptpmsg_irq->num, NULL, ksz_ptp_msg_thread_fn, IRQF_ONESHOT, @@ -1139,17 +1130,14 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) init_completion(&port->tstamp_msg_comp); - ptpirq->domain = irq_domain_add_linear(dev->dev->of_node, ptpirq->nirqs, - &ksz_ptp_irq_domain_ops, ptpirq); + ptpirq->domain = irq_domain_create_linear(dev_fwnode(dev->dev), ptpirq->nirqs, + &ksz_ptp_irq_domain_ops, ptpirq); if (!ptpirq->domain) return -ENOMEM; - for (irq = 0; irq < ptpirq->nirqs; irq++) - irq_create_mapping(ptpirq->domain, irq); - ptpirq->irq_num = irq_find_mapping(port->pirq.domain, PORT_SRC_PTP_INT); - if (ptpirq->irq_num < 0) { - ret = ptpirq->irq_num; + if (!ptpirq->irq_num) { + ret = -EINVAL; goto out; } @@ -1168,12 +1156,11 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) out_ptp_msg: free_irq(ptpirq->irq_num, ptpirq); - while (irq--) + while (irq--) { free_irq(port->ptpmsg_irq[irq].num, &port->ptpmsg_irq[irq]); -out: - for (irq = 0; irq < ptpirq->nirqs; irq++) irq_dispose_mapping(port->ptpmsg_irq[irq].num); - + } +out: irq_domain_remove(ptpirq->domain); return ret; diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h index 0ca8ca4f804e..3086e519b1b6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.h +++ b/drivers/net/dsa/microchip/ksz_ptp.h @@ -38,9 +38,12 @@ int ksz_ptp_clock_register(struct dsa_switch *ds); void ksz_ptp_clock_unregister(struct dsa_switch *ds); int ksz_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *ts); -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); + struct kernel_ethtool_ts_info *ts); +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); void ksz_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); void ksz_port_deferred_xmit(struct kthread_work *work); bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb, diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 8e8d83213b04..d8001734b057 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -2,11 +2,11 @@ /* * Microchip ksz series register access through SPI * - * Copyright (C) 2017 Microchip Technology Inc. + * Copyright (C) 2017-2024 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> */ -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <linux/delay.h> #include <linux/kernel.h> @@ -16,6 +16,10 @@ #include "ksz_common.h" +#define KSZ8463_SPI_ADDR_SHIFT 13 +#define KSZ8463_SPI_ADDR_ALIGN 3 +#define KSZ8463_SPI_TURNAROUND_SHIFT 2 + #define KSZ8795_SPI_ADDR_SHIFT 12 #define KSZ8795_SPI_ADDR_ALIGN 3 #define KSZ8795_SPI_TURNAROUND_SHIFT 1 @@ -37,6 +41,99 @@ KSZ_REGMAP_TABLE(ksz8863, 16, KSZ8863_SPI_ADDR_SHIFT, KSZ_REGMAP_TABLE(ksz9477, 32, KSZ9477_SPI_ADDR_SHIFT, KSZ9477_SPI_TURNAROUND_SHIFT, KSZ9477_SPI_ADDR_ALIGN); +static u16 ksz8463_reg(u16 reg, size_t size) +{ + switch (size) { + case 1: + reg = ((reg >> 2) << 4) | (1 << (reg & 3)); + break; + case 2: + reg = ((reg >> 2) << 4) | (reg & 2 ? 0x0c : 0x03); + break; + default: + reg = ((reg >> 2) << 4) | 0xf; + break; + } + reg <<= KSZ8463_SPI_TURNAROUND_SHIFT; + return reg; +} + +static int ksz8463_spi_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 bytes[2]; + u16 cmd; + int rc; + + if (reg_size > 2 || val_size > 4) + return -EINVAL; + memcpy(&cmd, reg, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); + rc = spi_write_then_read(spi, bytes, reg_size, val, val_size); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (!rc && val_size > 1) { + if (val_size == 2) { + u16 v = get_unaligned_le16(val); + + memcpy(val, &v, sizeof(v)); + } else if (val_size == 4) { + u32 v = get_unaligned_le32(val); + + memcpy(val, &v, sizeof(v)); + } + } +#endif + return rc; +} + +static int ksz8463_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + size_t val_size = count - 2; + u8 bytes[6]; + u16 cmd; + + if (count <= 2 || count > 6) + return -EINVAL; + memcpy(bytes, data, count); + memcpy(&cmd, data, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + cmd |= (1 << (KSZ8463_SPI_ADDR_SHIFT + KSZ8463_SPI_TURNAROUND_SHIFT)); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (val_size == 2) { + u8 *val = &bytes[2]; + u16 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le16(v, val); + } else if (val_size == 4) { + u8 *val = &bytes[2]; + u32 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le32(v, val); + } +#endif + return spi_write(spi, bytes, count); +} + +KSZ8463_REGMAP_TABLE(ksz8463, KSZ8463_SPI_ADDR_SHIFT, 0, + KSZ8463_SPI_ADDR_ALIGN); + static int ksz_spi_probe(struct spi_device *spi) { const struct regmap_config *regmap_config; @@ -54,12 +151,19 @@ static int ksz_spi_probe(struct spi_device *spi) if (!chip) return -EINVAL; - if (chip->chip_id == KSZ8830_CHIP_ID) + /* Save chip id to do special initialization when probing. */ + dev->chip_id = chip->chip_id; + if (chip->chip_id == KSZ88X3_CHIP_ID) regmap_config = ksz8863_regmap_config; + else if (chip->chip_id == KSZ8463_CHIP_ID) + regmap_config = ksz8463_regmap_config; else if (chip->chip_id == KSZ8795_CHIP_ID || chip->chip_id == KSZ8794_CHIP_ID || chip->chip_id == KSZ8765_CHIP_ID) regmap_config = ksz8795_regmap_config; + else if (chip->chip_id == KSZ8895_CHIP_ID || + chip->chip_id == KSZ8864_CHIP_ID) + regmap_config = ksz8863_regmap_config; else regmap_config = ksz9477_regmap_config; @@ -121,6 +225,10 @@ static void ksz_spi_shutdown(struct spi_device *spi) static const struct of_device_id ksz_dt_ids[] = { { + .compatible = "microchip,ksz8463", + .data = &ksz_switch_chips[KSZ8463] + }, + { .compatible = "microchip,ksz8765", .data = &ksz_switch_chips[KSZ8765] }, @@ -134,11 +242,19 @@ static const struct of_device_id ksz_dt_ids[] = { }, { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] + }, + { + .compatible = "microchip,ksz8864", + .data = &ksz_switch_chips[KSZ8864] }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] + }, + { + .compatible = "microchip,ksz8895", + .data = &ksz_switch_chips[KSZ8895] }, { .compatible = "microchip,ksz9477", @@ -192,16 +308,23 @@ static const struct of_device_id ksz_dt_ids[] = { .compatible = "microchip,lan9374", .data = &ksz_switch_chips[LAN9374] }, + { + .compatible = "microchip,lan9646", + .data = &ksz_switch_chips[LAN9646] + }, {}, }; MODULE_DEVICE_TABLE(of, ksz_dt_ids); static const struct spi_device_id ksz_spi_ids[] = { + { "ksz8463" }, { "ksz8765" }, { "ksz8794" }, { "ksz8795" }, { "ksz8863" }, + { "ksz8864" }, { "ksz8873" }, + { "ksz8895" }, { "ksz9477" }, { "ksz9896" }, { "ksz9897" }, @@ -215,14 +338,19 @@ static const struct spi_device_id ksz_spi_ids[] = { { "lan9372" }, { "lan9373" }, { "lan9374" }, + { "lan9646" }, { }, }; MODULE_DEVICE_TABLE(spi, ksz_spi_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_spi_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct spi_driver ksz_spi_driver = { .driver = { .name = "ksz-switch", .of_match_table = ksz_dt_ids, + .pm = &ksz_spi_pm_ops, }, .id_table = ksz_spi_ids, .probe = ksz_spi_probe, diff --git a/drivers/net/dsa/microchip/lan937x.h b/drivers/net/dsa/microchip/lan937x.h index 3388d91dbc44..df13ebbd356f 100644 --- a/drivers/net/dsa/microchip/lan937x.h +++ b/drivers/net/dsa/microchip/lan937x.h @@ -13,6 +13,8 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port); void lan937x_config_cpu_port(struct dsa_switch *ds); int lan937x_switch_init(struct ksz_device *dev); void lan937x_switch_exit(struct ksz_device *dev); +int lan937x_mdio_bus_preinit(struct ksz_device *dev, bool side_mdio); +int lan937x_create_phy_addr_map(struct ksz_device *dev, bool side_mdio); int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data); int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val); int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu); diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c index 824d9309a3d3..5a1496fff445 100644 --- a/drivers/net/dsa/microchip/lan937x_main.c +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Microchip LAN937X switch driver main logic - * Copyright (C) 2019-2022 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #include <linux/kernel.h> #include <linux/module.h> @@ -18,6 +18,87 @@ #include "ksz9477.h" #include "lan937x.h" +/* marker for ports without built-in PHY */ +#define LAN937X_NO_PHY U8_MAX + +/* + * lan9370_phy_addr - Mapping of LAN9370 switch ports to PHY addresses. + * + * Each entry corresponds to a specific port on the LAN9370 switch, + * where ports 1-4 are connected to integrated 100BASE-T1 PHYs, and + * Port 5 is connected to an RGMII interface without a PHY. The values + * are based on the documentation (DS00003108E, section 3.3). + */ +static const u8 lan9370_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 6, /* Port 4, T1 AFE4 */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ +}; + +/* + * lan9371_phy_addr - Mapping of LAN9371 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003109E, section 3.3). + */ +static const u8 lan9371_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 8, /* Port 4, TX PHY */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ +}; + +/* + * lan9372_phy_addr - Mapping of LAN9372 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9372_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 8, /* Port 4, TX PHY */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + +/* + * lan9373_phy_addr - Mapping of LAN9373 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9373_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = LAN937X_NO_PHY, /* Port 4, SGMII */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + +/* + * lan9374_phy_addr - Mapping of LAN9374 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9374_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 7, /* Port 4, T1 AFE5 */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); @@ -30,24 +111,144 @@ static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, bits, set ? bits : 0); } -static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +/** + * lan937x_create_phy_addr_map - Create port-to-PHY address map for MDIO bus. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side MDIO bus. + * + * This function sets up the PHY address mapping for the LAN937x switches, + * which support two access modes for internal PHYs: + * 1. **SPI Access**: A straightforward one-to-one port-to-PHY address + * mapping is applied. + * 2. **MDIO Access**: The PHY address mapping varies based on chip variant + * and strap configuration. An offset is calculated based on strap settings + * to ensure correct PHY addresses are assigned. The offset calculation logic + * is based on Microchip's Article Number 000015828, available at: + * https://microchip.my.site.com/s/article/LAN9374-Virtual-PHY-PHY-Address-Mapping + * + * The function first checks if side MDIO access is disabled, in which case a + * simple direct mapping (port number = PHY address) is applied. If side MDIO + * access is enabled, it reads the strap configuration to determine the correct + * offset for PHY addresses. + * + * The appropriate mapping table is selected based on the chip ID, and the + * `phy_addr_map` is populated with the correct addresses for each port. Any + * port with no PHY is assigned a `LAN937X_NO_PHY` marker. + * + * Return: 0 on success, error code on failure. + */ +int lan937x_create_phy_addr_map(struct ksz_device *dev, bool side_mdio) +{ + static const u8 *phy_addr_map; + u32 strap_val; + u8 offset = 0; + size_t size; + int ret, i; + + if (!side_mdio) { + /* simple direct mapping */ + for (i = 0; i < dev->info->port_cnt; i++) + dev->phy_addr_map[i] = i; + + return 0; + } + + ret = ksz_read32(dev, REG_SW_CFG_STRAP_VAL, &strap_val); + if (ret < 0) + return ret; + + if (!(strap_val & SW_CASCADE_ID_CFG) && !(strap_val & SW_VPHY_ADD_CFG)) + offset = 0; + else if (!(strap_val & SW_CASCADE_ID_CFG) && (strap_val & SW_VPHY_ADD_CFG)) + offset = 7; + else if ((strap_val & SW_CASCADE_ID_CFG) && !(strap_val & SW_VPHY_ADD_CFG)) + offset = 15; + else + offset = 22; + + switch (dev->info->chip_id) { + case LAN9370_CHIP_ID: + phy_addr_map = lan9370_phy_addr; + size = ARRAY_SIZE(lan9370_phy_addr); + break; + case LAN9371_CHIP_ID: + phy_addr_map = lan9371_phy_addr; + size = ARRAY_SIZE(lan9371_phy_addr); + break; + case LAN9372_CHIP_ID: + phy_addr_map = lan9372_phy_addr; + size = ARRAY_SIZE(lan9372_phy_addr); + break; + case LAN9373_CHIP_ID: + phy_addr_map = lan9373_phy_addr; + size = ARRAY_SIZE(lan9373_phy_addr); + break; + case LAN9374_CHIP_ID: + phy_addr_map = lan9374_phy_addr; + size = ARRAY_SIZE(lan9374_phy_addr); + break; + default: + return -EINVAL; + } + + if (size < dev->info->port_cnt) + return -EINVAL; + + for (i = 0; i < dev->info->port_cnt; i++) { + if (phy_addr_map[i] == LAN937X_NO_PHY) + dev->phy_addr_map[i] = phy_addr_map[i]; + else + dev->phy_addr_map[i] = phy_addr_map[i] + offset; + } + + return 0; +} + +/** + * lan937x_mdio_bus_preinit - Pre-initialize MDIO bus for accessing PHYs. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side MDIO bus. + * + * This function configures the LAN937x switch for PHY access either through + * SPI or the side MDIO bus, unlocking the necessary registers for each access + * mode. + * + * Operation Modes: + * 1. **SPI Access**: Enables SPI indirect access to address clock domain + * crossing issues when SPI is used for PHY access. + * 2. **MDIO Access**: Grants access to internal PHYs over the side MDIO bus, + * required when using the MDIO bus for PHY management. + * + * Return: 0 on success, error code on failure. + */ +int lan937x_mdio_bus_preinit(struct ksz_device *dev, bool side_mdio) { u16 data16; int ret; - /* Enable Phy access through SPI */ + /* Unlock access to the PHYs, needed for SPI and side MDIO access */ ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); if (ret < 0) - return ret; + goto print_error; - ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); - if (ret < 0) - return ret; + if (side_mdio) + /* Allow access to internal PHYs over MDIO bus */ + data16 = VPHY_MDIO_INTERNAL_ENABLE; + else + /* Enable SPI indirect access to address clock domain crossing + * issue + */ + data16 = VPHY_SPI_INDIRECT_ENABLE; - /* Allow SPI access */ - data16 |= VPHY_SPI_INDIRECT_ENABLE; + ret = ksz_rmw16(dev, REG_VPHY_SPECIAL_CTRL__2, + VPHY_SPI_INDIRECT_ENABLE | VPHY_MDIO_INTERNAL_ENABLE, + data16); - return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); +print_error: + if (ret < 0) + dev_err(dev->dev, "failed to preinit the MDIO bus\n"); + + return ret; } static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) @@ -260,10 +461,66 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { - u32 secs = msecs / 1000; - u32 value; + u8 data, mult, value8; + bool in_msec = false; + u32 max_val, value; + u32 secs = msecs; int ret; +#define MAX_TIMER_VAL ((1 << 20) - 1) + + /* The aging timer comprises a 3-bit multiplier and a 20-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 1048575 = 7340025 seconds. As this value is too large for + * practical use it can be interpreted as microseconds, making the + * maximum timer 7340 seconds with finer control. This allows for + * maximum 122 minutes compared to 29 minutes in KSZ9477 switch. + */ + if (msecs % 1000) + in_msec = true; + else + secs /= 1000; + if (!secs) + secs = 1; + + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; + + /* Configure how to interpret the number value. */ + ret = ksz_rmw8(dev, REG_SW_LUE_CTRL_2, SW_AGE_CNT_IN_MICROSEC, + in_msec ? SW_AGE_CNT_IN_MICROSEC : 0); + if (ret < 0) + return ret; + + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value8); + if (ret < 0) + return ret; + + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value8); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } + + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value8 &= ~SW_AGE_CNT_M; + value8 |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value8); + if (ret < 0) + return ret; + } + + secs = DIV_ROUND_UP(secs, data); + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); @@ -283,6 +540,7 @@ static void lan937x_set_tune_adj(struct ksz_device *dev, int port, ksz_pread16(dev, port, reg, &data16); /* Update tune Adjust */ + data16 &= ~PORT_TUNE_ADJ; data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); ksz_pwrite16(dev, port, reg, data16); @@ -363,13 +621,6 @@ int lan937x_setup(struct dsa_switch *ds) struct ksz_device *dev = ds->priv; int ret; - /* enable Indirect Access from SPI to the VPHY registers */ - ret = lan937x_enable_spi_indirect_access(dev); - if (ret < 0) { - dev_err(dev->dev, "failed to enable spi indirect access"); - return ret; - } - /* The VLAN aware is a global setting. Mixed vlan * filterings are not supported. */ diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h index 2f22a9d01de3..72042fd64e5b 100644 --- a/drivers/net/dsa/microchip/lan937x_reg.h +++ b/drivers/net/dsa/microchip/lan937x_reg.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip LAN937X switch register definitions - * Copyright (C) 2019-2021 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #ifndef __LAN937X_REG_H #define __LAN937X_REG_H @@ -37,6 +37,10 @@ #define SW_CLK125_ENB BIT(1) #define SW_CLK25_ENB BIT(0) +#define REG_SW_CFG_STRAP_VAL 0x0200 +#define SW_CASCADE_ID_CFG BIT(15) +#define SW_VPHY_ADD_CFG BIT(0) + /* 2 - PHY Control */ #define REG_SW_CFG_STRAP_OVR 0x0214 #define SW_VPHY_DISABLE BIT(31) @@ -52,8 +56,7 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) -#define SW_AGE_CNT_M 0x7 -#define SW_AGE_CNT_S 3 +#define SW_AGE_CNT_M GENMASK(5, 3) #define SW_RESV_MCAST_ENABLE BIT(2) #define REG_SW_LUE_CTRL_1 0x0311 @@ -66,6 +69,10 @@ #define SW_FAST_AGING BIT(1) #define SW_LINK_AUTO_AGING BIT(0) +#define REG_SW_LUE_CTRL_2 0x0312 + +#define SW_AGE_CNT_IN_MICROSEC BIT(7) + #define REG_SW_AGE_PERIOD__1 0x0313 #define SW_AGE_PERIOD_7_0_M GENMASK(7, 0) |