diff options
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx')
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 56 | ||||
| -rw-r--r-- | drivers/net/dsa/mv88e6xxx/port.h | 23 |
2 files changed, 71 insertions, 8 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index c95787cb9086..59b5dd0e2f41 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -566,13 +566,61 @@ static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported) phy_interface_set_rgmii(supported); } -static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, - struct phylink_config *config) +static void +mv88e6250_setup_supported_interfaces(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) { unsigned long *supported = config->supported_interfaces; + int err; + u16 reg; - /* Translate the default cmode */ - mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); + if (err) { + dev_err(chip->dev, "p%d: failed to read port status\n", port); + return; + } + + switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) { + case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY: + __set_bit(PHY_INTERFACE_MODE_REVMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_HALF: + case MV88E6250_PORT_STS_PORTMODE_MII_FULL: + __set_bit(PHY_INTERFACE_MODE_MII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY: + __set_bit(PHY_INTERFACE_MODE_REVRMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL: + __set_bit(PHY_INTERFACE_MODE_RMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII: + __set_bit(PHY_INTERFACE_MODE_RGMII, supported); + break; + + default: + dev_err(chip->dev, + "p%d: invalid port mode in status register: %04x\n", + port, reg); + } +} + +static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + if (!mv88e6xxx_phy_is_internal(chip, port)) + mv88e6250_setup_supported_interfaces(chip, port, config); config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; } diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index 86deeb347cbc..ddadeb9bfdae 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -25,10 +25,25 @@ #define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900 #define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00 #define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00 -#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00 -#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00 -#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00 -#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00 +/* - Modes with PHY suffix use output instead of input clock + * - Modes without RMII or RGMII use MII + * - Modes without speed do not have a fixed speed specified in the manual + * ("DC to x MHz" - variable clock support?) + */ +#define MV88E6250_PORT_STS_PORTMODE_MII_DISABLED 0x0000 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII 0x0100 +#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY 0x0200 +#define MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY 0x0400 +#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL 0x0600 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL 0x0700 +#define MV88E6250_PORT_STS_PORTMODE_MII_HALF 0x0800 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY 0x0900 +#define MV88E6250_PORT_STS_PORTMODE_MII_FULL 0x0a00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY 0x0b00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY 0x0c00 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY 0x0d00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY 0x0e00 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY 0x0f00 #define MV88E6XXX_PORT_STS_LINK 0x0800 #define MV88E6XXX_PORT_STS_DUPLEX 0x0400 #define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300 |