diff options
Diffstat (limited to 'drivers/net/dsa/realtek/realtek-mdio.c')
| -rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.c | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c new file mode 100644 index 000000000000..a5e7dff96e91 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Realtek MDIO interface driver + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/overflow.h> +#include <linux/regmap.h> + +#include "realtek.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" + +/* Read/write via mdiobus */ +#define REALTEK_MDIO_CTRL0_REG 31 +#define REALTEK_MDIO_START_REG 29 +#define REALTEK_MDIO_CTRL1_REG 21 +#define REALTEK_MDIO_ADDRESS_REG 23 +#define REALTEK_MDIO_DATA_WRITE_REG 24 +#define REALTEK_MDIO_DATA_READ_REG 25 + +#define REALTEK_MDIO_START_OP 0xFFFF +#define REALTEK_MDIO_ADDR_OP 0x000E +#define REALTEK_MDIO_READ_OP 0x0001 +#define REALTEK_MDIO_WRITE_OP 0x0003 + +static int realtek_mdio_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_DATA_WRITE_REG, val); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_WRITE_OP); + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int realtek_mdio_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_priv *priv = ctx; + struct mii_bus *bus = priv->bus; + int ret; + + mutex_lock(&bus->mdio_lock); + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL0_REG, REALTEK_MDIO_ADDR_OP); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_ADDRESS_REG, reg); + if (ret) + goto out_unlock; + + ret = bus->write(bus, priv->mdio_addr, REALTEK_MDIO_CTRL1_REG, REALTEK_MDIO_READ_OP); + if (ret) + goto out_unlock; + + ret = bus->read(bus, priv->mdio_addr, REALTEK_MDIO_DATA_READ_REG); + if (ret >= 0) { + *val = ret; + ret = 0; + } + +out_unlock: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static const struct realtek_interface_info realtek_mdio_info = { + .reg_read = realtek_mdio_read, + .reg_write = realtek_mdio_write, +}; + +/** + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch + * @mdiodev: mdio_device to probe on. + * + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct realtek_priv *priv; + int ret; + + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); + + priv->bus = mdiodev->bus; + priv->mdio_addr = mdiodev->addr; + priv->write_reg_noack = realtek_mdio_write; + + ret = rtl83xx_register_switch(priv); + if (ret) { + rtl83xx_remove(priv); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, "REALTEK_DSA"); + +/** + * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch + * @mdiodev: mdio_device to be removed. + * + * This function should be used as the .remove in an mdio_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_remove(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + rtl83xx_unregister_switch(priv); + + rtl83xx_remove(priv); +} +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, "REALTEK_DSA"); + +/** + * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch + * @mdiodev: mdio_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + rtl83xx_shutdown(priv); +} +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, "REALTEK_DSA"); |