summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/realtek
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/realtek')
-rw-r--r--drivers/net/dsa/realtek/Kconfig6
-rw-r--r--drivers/net/dsa/realtek/Makefile3
-rw-r--r--drivers/net/dsa/realtek/realtek-mdio.c8
-rw-r--r--drivers/net/dsa/realtek/realtek-smi.c8
-rw-r--r--drivers/net/dsa/realtek/realtek.h2
-rw-r--r--drivers/net/dsa/realtek/rtl8365mb.c42
-rw-r--r--drivers/net/dsa/realtek/rtl8366-core.c22
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb-leds.c177
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb.c223
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb.h107
-rw-r--r--drivers/net/dsa/realtek/rtl83xx.c32
11 files changed, 438 insertions, 192 deletions
diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig
index 6989972eebc3..d6eb6713e5f6 100644
--- a/drivers/net/dsa/realtek/Kconfig
+++ b/drivers/net/dsa/realtek/Kconfig
@@ -43,4 +43,10 @@ config NET_DSA_REALTEK_RTL8366RB
help
Select to enable support for Realtek RTL8366RB.
+config NET_DSA_REALTEK_RTL8366RB_LEDS
+ bool
+ depends on (LEDS_CLASS=y || LEDS_CLASS=NET_DSA_REALTEK_RTL8366RB)
+ depends on NET_DSA_REALTEK_RTL8366RB
+ default NET_DSA_REALTEK_RTL8366RB
+
endif
diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile
index 35491dc20d6d..17367bcba496 100644
--- a/drivers/net/dsa/realtek/Makefile
+++ b/drivers/net/dsa/realtek/Makefile
@@ -12,4 +12,7 @@ endif
obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
rtl8366-objs := rtl8366-core.o rtl8366rb.o
+ifdef CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS
+rtl8366-objs += rtl8366rb-leds.o
+endif
obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
index 04b758e5a680..a5e7dff96e91 100644
--- a/drivers/net/dsa/realtek/realtek-mdio.c
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -140,13 +140,13 @@ int realtek_mdio_probe(struct mdio_device *mdiodev)
return 0;
}
-EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, "REALTEK_DSA");
/**
* realtek_mdio_remove() - Remove the driver of an MDIO-connected switch
* @mdiodev: mdio_device to be removed.
*
- * This function should be used as the .remove_new in an mdio_driver. First
+ * This function should be used as the .remove in an mdio_driver. First
* it unregisters the DSA switch and then it calls the common remove function.
*
* Context: Can sleep.
@@ -163,7 +163,7 @@ void realtek_mdio_remove(struct mdio_device *mdiodev)
rtl83xx_remove(priv);
}
-EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, "REALTEK_DSA");
/**
* realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch
@@ -184,4 +184,4 @@ void realtek_mdio_shutdown(struct mdio_device *mdiodev)
rtl83xx_shutdown(priv);
}
-EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, "REALTEK_DSA");
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
index 88590ae95a75..972e22218418 100644
--- a/drivers/net/dsa/realtek/realtek-smi.c
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -361,13 +361,13 @@ int realtek_smi_probe(struct platform_device *pdev)
return 0;
}
-EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, "REALTEK_DSA");
/**
* realtek_smi_remove() - Remove the driver of a SMI-connected switch
* @pdev: platform_device to be removed.
*
- * This function should be used as the .remove_new in a platform_driver. First
+ * This function should be used as the .remove in a platform_driver. First
* it unregisters the DSA switch and then it calls the common remove function.
*
* Context: Can sleep.
@@ -384,7 +384,7 @@ void realtek_smi_remove(struct platform_device *pdev)
rtl83xx_remove(priv);
}
-EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, "REALTEK_DSA");
/**
* realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch
@@ -405,4 +405,4 @@ void realtek_smi_shutdown(struct platform_device *pdev)
rtl83xx_shutdown(priv);
}
-EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, "REALTEK_DSA");
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index e0b1aa01337b..a1b2e0b529d5 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -17,6 +17,7 @@
#define REALTEK_HW_STOP_DELAY 25 /* msecs */
#define REALTEK_HW_START_DELAY 100 /* msecs */
+struct phylink_mac_ops;
struct realtek_ops;
struct dentry;
struct inode;
@@ -117,6 +118,7 @@ struct realtek_ops {
struct realtek_variant {
const struct dsa_switch_ops *ds_ops;
const struct realtek_ops *ops;
+ const struct phylink_mac_ops *phylink_mac_ops;
unsigned int clk_delay;
u8 cmd_read;
u8 cmd_write;
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 12665a8a3412..964a56ee16cc 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1048,11 +1048,13 @@ static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
phy_interface_set_rgmii(config->supported_interfaces);
}
-static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
+ u8 port = dp->index;
int ret;
if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) {
@@ -1076,13 +1078,15 @@ static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
*/
}
-static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
struct rtl8365mb_port *p;
struct rtl8365mb *mb;
+ u8 port = dp->index;
int ret;
mb = priv->chip_data;
@@ -1101,16 +1105,18 @@ static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port,
}
}
-static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause,
+ int speed, int duplex, bool tx_pause,
bool rx_pause)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
struct rtl8365mb_port *p;
struct rtl8365mb *mb;
+ u8 port = dp->index;
int ret;
mb = priv->chip_data;
@@ -1713,8 +1719,8 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv)
goto out_put_node;
}
- priv->irqdomain = irq_domain_add_linear(intc, priv->num_ports,
- &rtl8365mb_irqdomain_ops, priv);
+ priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), priv->num_ports,
+ &rtl8365mb_irqdomain_ops, priv);
if (!priv->irqdomain) {
dev_err(priv->dev, "failed to add irq domain\n");
ret = -ENOMEM;
@@ -1734,7 +1740,7 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv)
}
/* Configure chip interrupt signal polarity */
- irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ irq_trig = irq_get_trigger_type(irq);
switch (irq_trig) {
case IRQF_TRIGGER_RISING:
case IRQF_TRIGGER_HIGH:
@@ -2106,15 +2112,18 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
return 0;
}
+static const struct phylink_mac_ops rtl8365mb_phylink_mac_ops = {
+ .mac_config = rtl8365mb_phylink_mac_config,
+ .mac_link_down = rtl8365mb_phylink_mac_link_down,
+ .mac_link_up = rtl8365mb_phylink_mac_link_up,
+};
+
static const struct dsa_switch_ops rtl8365mb_switch_ops = {
.get_tag_protocol = rtl8365mb_get_tag_protocol,
.change_tag_protocol = rtl8365mb_change_tag_protocol,
.setup = rtl8365mb_setup,
.teardown = rtl8365mb_teardown,
.phylink_get_caps = rtl8365mb_phylink_get_caps,
- .phylink_mac_config = rtl8365mb_phylink_mac_config,
- .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
- .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
.port_stp_state_set = rtl8365mb_port_stp_state_set,
.get_strings = rtl8365mb_get_strings,
.get_ethtool_stats = rtl8365mb_get_ethtool_stats,
@@ -2136,6 +2145,7 @@ static const struct realtek_ops rtl8365mb_ops = {
const struct realtek_variant rtl8365mb_variant = {
.ds_ops = &rtl8365mb_switch_ops,
.ops = &rtl8365mb_ops,
+ .phylink_mac_ops = &rtl8365mb_phylink_mac_ops,
.clk_delay = 10,
.cmd_read = 0xb9,
.cmd_write = 0xb8,
@@ -2154,7 +2164,7 @@ static struct platform_driver rtl8365mb_smi_driver = {
.of_match_table = rtl8365mb_of_match,
},
.probe = realtek_smi_probe,
- .remove_new = realtek_smi_remove,
+ .remove = realtek_smi_remove,
.shutdown = realtek_smi_shutdown,
};
@@ -2196,4 +2206,4 @@ module_exit(rtl8365mb_exit);
MODULE_AUTHOR("Alvin Šipraga <alsi@bang-olufsen.dk>");
MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch");
MODULE_LICENSE("GPL");
-MODULE_IMPORT_NS(REALTEK_DSA);
+MODULE_IMPORT_NS("REALTEK_DSA");
diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c
index 7c6520ba3a26..047feeed96a2 100644
--- a/drivers/net/dsa/realtek/rtl8366-core.c
+++ b/drivers/net/dsa/realtek/rtl8366-core.c
@@ -34,7 +34,7 @@ int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used)
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, "REALTEK_DSA");
/**
* rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
@@ -187,7 +187,7 @@ int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member,
return ret;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, "REALTEK_DSA");
int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port,
unsigned int vid)
@@ -217,7 +217,7 @@ int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port,
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, "REALTEK_DSA");
int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable)
{
@@ -243,7 +243,7 @@ int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable)
priv->vlan4k_enabled = enable;
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, "REALTEK_DSA");
int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable)
{
@@ -265,7 +265,7 @@ int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable)
return ret;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, "REALTEK_DSA");
int rtl8366_reset_vlan(struct realtek_priv *priv)
{
@@ -290,7 +290,7 @@ int rtl8366_reset_vlan(struct realtek_priv *priv)
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, "REALTEK_DSA");
int rtl8366_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
@@ -345,7 +345,7 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, "REALTEK_DSA");
int rtl8366_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
@@ -389,7 +389,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, "REALTEK_DSA");
void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
uint8_t *data)
@@ -403,7 +403,7 @@ void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
for (i = 0; i < priv->num_mib_counters; i++)
ethtool_puts(&data, priv->mib_counters[i].name);
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, "REALTEK_DSA");
int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
@@ -417,7 +417,7 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
return priv->num_mib_counters;
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, "REALTEK_DSA");
void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
{
@@ -441,4 +441,4 @@ void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
data[i] = mibvalue;
}
}
-EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, "REALTEK_DSA");
diff --git a/drivers/net/dsa/realtek/rtl8366rb-leds.c b/drivers/net/dsa/realtek/rtl8366rb-leds.c
new file mode 100644
index 000000000000..99c890681ae6
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8366rb-leds.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <net/dsa.h>
+#include "rtl83xx.h"
+#include "rtl8366rb.h"
+
+static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port)
+{
+ switch (led_group) {
+ case 0:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 1:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 2:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 3:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ default:
+ return 0;
+ }
+}
+
+static int rb8366rb_get_port_led(struct rtl8366rb_led *led)
+{
+ struct realtek_priv *priv = led->priv;
+ u8 led_group = led->led_group;
+ u8 port_num = led->port_num;
+ int ret;
+ u32 val;
+
+ ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group),
+ &val);
+ if (ret) {
+ dev_err(priv->dev, "error reading LED on port %d group %d\n",
+ led_group, port_num);
+ return ret;
+ }
+
+ return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num));
+}
+
+static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable)
+{
+ struct realtek_priv *priv = led->priv;
+ u8 led_group = led->led_group;
+ u8 port_num = led->port_num;
+ int ret;
+
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_X_X_CTRL_REG(led_group),
+ rtl8366rb_led_group_port_mask(led_group,
+ port_num),
+ enable ? 0xffff : 0);
+ if (ret) {
+ dev_err(priv->dev, "error updating LED on port %d group %d\n",
+ led_group, port_num);
+ return ret;
+ }
+
+ /* Change the LED group to manual controlled LEDs if required */
+ ret = rb8366rb_set_ledgroup_mode(priv, led_group,
+ RTL8366RB_LEDGROUP_FORCE);
+
+ if (ret) {
+ dev_err(priv->dev, "error updating LED GROUP group %d\n",
+ led_group);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev,
+ enum led_brightness brightness)
+{
+ struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led,
+ cdev);
+
+ return rb8366rb_set_port_led(led, brightness == LED_ON);
+}
+
+static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp,
+ struct fwnode_handle *led_fwnode)
+{
+ struct rtl8366rb *rb = priv->chip_data;
+ struct led_init_data init_data = { };
+ enum led_default_state state;
+ struct rtl8366rb_led *led;
+ u32 led_group;
+ int ret;
+
+ ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group);
+ if (ret)
+ return ret;
+
+ if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+ dev_warn(priv->dev, "Invalid LED reg %d defined for port %d",
+ led_group, dp->index);
+ return -EINVAL;
+ }
+
+ led = &rb->leds[dp->index][led_group];
+ led->port_num = dp->index;
+ led->led_group = led_group;
+ led->priv = priv;
+
+ state = led_init_default_state_get(led_fwnode);
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ led->cdev.brightness = 1;
+ rb8366rb_set_port_led(led, 1);
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ led->cdev.brightness =
+ rb8366rb_get_port_led(led);
+ break;
+ case LEDS_DEFSTATE_OFF:
+ default:
+ led->cdev.brightness = 0;
+ rb8366rb_set_port_led(led, 0);
+ }
+
+ led->cdev.max_brightness = 1;
+ led->cdev.brightness_set_blocking =
+ rtl8366rb_cled_brightness_set_blocking;
+ init_data.fwnode = led_fwnode;
+ init_data.devname_mandatory = true;
+
+ init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d",
+ dp->ds->index, dp->index, led_group);
+ if (!init_data.devicename)
+ return -ENOMEM;
+
+ ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data);
+ if (ret) {
+ dev_warn(priv->dev, "Failed to init LED %d for port %d",
+ led_group, dp->index);
+ return ret;
+ }
+
+ return 0;
+}
+
+int rtl8366rb_setup_leds(struct realtek_priv *priv)
+{
+ struct dsa_switch *ds = &priv->ds;
+ struct device_node *leds_np;
+ struct dsa_port *dp;
+ int ret = 0;
+
+ dsa_switch_for_each_port(dp, ds) {
+ if (!dp->dn)
+ continue;
+
+ leds_np = of_get_child_by_name(dp->dn, "leds");
+ if (!leds_np) {
+ dev_dbg(priv->dev, "No leds defined for port %d",
+ dp->index);
+ continue;
+ }
+
+ for_each_child_of_node_scoped(leds_np, led_np) {
+ ret = rtl8366rb_setup_led(priv, dp,
+ of_fwnode_handle(led_np));
+ if (ret)
+ break;
+ }
+
+ of_node_put(leds_np);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index e10ae94cf771..8bdb52b5fdcb 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -21,16 +21,13 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
+#include <linux/string_choices.h>
#include "realtek.h"
#include "realtek-smi.h"
#include "realtek-mdio.h"
#include "rtl83xx.h"
-
-#define RTL8366RB_PORT_NUM_CPU 5
-#define RTL8366RB_NUM_PORTS 6
-#define RTL8366RB_PHY_NO_MAX 4
-#define RTL8366RB_PHY_ADDR_MAX 31
+#include "rtl8366rb.h"
/* Switch Global Configuration register */
#define RTL8366RB_SGCR 0x0000
@@ -175,38 +172,6 @@
*/
#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
-/* LED control registers */
-#define RTL8366RB_LED_BLINKRATE_REG 0x0430
-#define RTL8366RB_LED_BLINKRATE_MASK 0x0007
-#define RTL8366RB_LED_BLINKRATE_28MS 0x0000
-#define RTL8366RB_LED_BLINKRATE_56MS 0x0001
-#define RTL8366RB_LED_BLINKRATE_84MS 0x0002
-#define RTL8366RB_LED_BLINKRATE_111MS 0x0003
-#define RTL8366RB_LED_BLINKRATE_222MS 0x0004
-#define RTL8366RB_LED_BLINKRATE_446MS 0x0005
-
-#define RTL8366RB_LED_CTRL_REG 0x0431
-#define RTL8366RB_LED_OFF 0x0
-#define RTL8366RB_LED_DUP_COL 0x1
-#define RTL8366RB_LED_LINK_ACT 0x2
-#define RTL8366RB_LED_SPD1000 0x3
-#define RTL8366RB_LED_SPD100 0x4
-#define RTL8366RB_LED_SPD10 0x5
-#define RTL8366RB_LED_SPD1000_ACT 0x6
-#define RTL8366RB_LED_SPD100_ACT 0x7
-#define RTL8366RB_LED_SPD10_ACT 0x8
-#define RTL8366RB_LED_SPD100_10_ACT 0x9
-#define RTL8366RB_LED_FIBER 0xa
-#define RTL8366RB_LED_AN_FAULT 0xb
-#define RTL8366RB_LED_LINK_RX 0xc
-#define RTL8366RB_LED_LINK_TX 0xd
-#define RTL8366RB_LED_MASTER 0xe
-#define RTL8366RB_LED_FORCE 0xf
-#define RTL8366RB_LED_0_1_CTRL_REG 0x0432
-#define RTL8366RB_LED_1_OFFSET 6
-#define RTL8366RB_LED_2_3_CTRL_REG 0x0433
-#define RTL8366RB_LED_3_OFFSET 6
-
#define RTL8366RB_MIB_COUNT 33
#define RTL8366RB_GLOBAL_MIB_COUNT 1
#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050
@@ -242,7 +207,6 @@
#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
#define RTL8366RB_NUM_VLANS 16
-#define RTL8366RB_NUM_LEDGROUPS 4
#define RTL8366RB_NUM_VIDS 4096
#define RTL8366RB_PRIORITYMAX 7
#define RTL8366RB_NUM_FIDS 8
@@ -349,16 +313,6 @@
#define RTL8366RB_GREEN_FEATURE_TX BIT(0)
#define RTL8366RB_GREEN_FEATURE_RX BIT(2)
-/**
- * struct rtl8366rb - RTL8366RB-specific data
- * @max_mtu: per-port max MTU setting
- * @pvid_enabled: if PVID is set for respective port
- */
-struct rtl8366rb {
- unsigned int max_mtu[RTL8366RB_NUM_PORTS];
- bool pvid_enabled[RTL8366RB_NUM_PORTS];
-};
-
static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
{ 0, 0, 4, "IfInOctets" },
{ 0, 4, 4, "EtherStatsOctets" },
@@ -568,7 +522,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv)
}
/* Fetch IRQ edge information from the descriptor */
- irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+ irq_trig = irq_get_trigger_type(irq);
switch (irq_trig) {
case IRQF_TRIGGER_RISING:
case IRQF_TRIGGER_HIGH:
@@ -596,10 +550,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv)
dev_err(priv->dev, "unable to request irq: %d\n", ret);
goto out_put_node;
}
- priv->irqdomain = irq_domain_add_linear(intc,
- RTL8366RB_NUM_INTERRUPT,
- &rtl8366rb_irqdomain_ops,
- priv);
+ priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), RTL8366RB_NUM_INTERRUPT,
+ &rtl8366rb_irqdomain_ops, priv);
if (!priv->irqdomain) {
dev_err(priv->dev, "failed to create IRQ domain\n");
ret = -EINVAL;
@@ -799,6 +751,47 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
return 0;
}
+/* This code is used also with LEDs disabled */
+int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv,
+ u8 led_group,
+ enum rtl8366_ledgroup_mode mode)
+{
+ int ret;
+ u32 val;
+
+ val = mode << RTL8366RB_LED_CTRL_OFFSET(led_group);
+
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_CTRL_REG,
+ RTL8366RB_LED_CTRL_MASK(led_group),
+ val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* This code is used also with LEDs disabled */
+static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv)
+{
+ int ret = 0;
+ int i;
+
+ regmap_update_bits(priv->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ 0);
+
+ for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
+ ret = rb8366rb_set_ledgroup_mode(priv, i,
+ RTL8366RB_LEDGROUP_OFF);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
static int rtl8366rb_setup(struct dsa_switch *ds)
{
struct realtek_priv *priv = ds->priv;
@@ -807,7 +800,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
u32 chip_ver = 0;
u32 chip_id = 0;
int jam_size;
- u32 val;
int ret;
int i;
@@ -987,7 +979,9 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Set blinking, TODO: make this configurable */
+ /* Set blinking, used by all LED groups using HW triggers.
+ * TODO: make this configurable
+ */
ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
RTL8366RB_LED_BLINKRATE_MASK,
RTL8366RB_LED_BLINKRATE_56MS);
@@ -995,32 +989,17 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return ret;
/* Set up LED activity:
- * Each port has 4 LEDs, we configure all ports to the same
- * behaviour (no individual config) but we can set up each
- * LED separately.
+ * Each port has 4 LEDs on fixed groups. Each group shares the same
+ * hardware trigger across all ports. LEDs can only be indiviually
+ * controlled setting the LED group to fixed mode and using the driver
+ * to toggle them LEDs on/off.
*/
if (priv->leds_disabled) {
- /* Turn everything off */
- regmap_update_bits(priv->map,
- RTL8366RB_LED_0_1_CTRL_REG,
- 0x0FFF, 0);
- regmap_update_bits(priv->map,
- RTL8366RB_LED_2_3_CTRL_REG,
- 0x0FFF, 0);
- regmap_update_bits(priv->map,
- RTL8366RB_INTERRUPT_CONTROL_REG,
- RTL8366RB_P4_RGMII_LED,
- 0);
- val = RTL8366RB_LED_OFF;
+ ret = rtl8366rb_setup_all_leds_off(priv);
+ if (ret)
+ return ret;
} else {
- /* TODO: make this configurable per LED */
- val = RTL8366RB_LED_FORCE;
- }
- for (i = 0; i < 4; i++) {
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_CTRL_REG,
- 0xf << (i * 4),
- val << (i * 4));
+ ret = rtl8366rb_setup_leds(priv);
if (ret)
return ret;
}
@@ -1077,11 +1056,19 @@ static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port,
}
static void
-rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
- phy_interface_t interface, struct phy_device *phydev,
+rtl8366rb_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+
+static void
+rtl8366rb_mac_link_up(struct phylink_config *config, struct phy_device *phydev,
+ unsigned int mode, phy_interface_t interface,
int speed, int duplex, bool tx_pause, bool rx_pause)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
+ int port = dp->index;
unsigned int val;
int ret;
@@ -1147,10 +1134,12 @@ rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
}
static void
-rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+rtl8366rb_mac_link_down(struct phylink_config *config, unsigned int mode,
phy_interface_t interface)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
+ int port = dp->index;
int ret;
if (port != priv->cpu_port)
@@ -1167,52 +1156,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
}
}
-static void rb8366rb_set_port_led(struct realtek_priv *priv,
- int port, bool enable)
-{
- u16 val = enable ? 0x3f : 0;
- int ret;
-
- if (priv->leds_disabled)
- return;
-
- switch (port) {
- case 0:
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_0_1_CTRL_REG,
- 0x3F, val);
- break;
- case 1:
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_0_1_CTRL_REG,
- 0x3F << RTL8366RB_LED_1_OFFSET,
- val << RTL8366RB_LED_1_OFFSET);
- break;
- case 2:
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_2_3_CTRL_REG,
- 0x3F, val);
- break;
- case 3:
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_2_3_CTRL_REG,
- 0x3F << RTL8366RB_LED_3_OFFSET,
- val << RTL8366RB_LED_3_OFFSET);
- break;
- case 4:
- ret = regmap_update_bits(priv->map,
- RTL8366RB_INTERRUPT_CONTROL_REG,
- RTL8366RB_P4_RGMII_LED,
- enable ? RTL8366RB_P4_RGMII_LED : 0);
- break;
- default:
- dev_err(priv->dev, "no LED for port %d\n", port);
- return;
- }
- if (ret)
- dev_err(priv->dev, "error updating LED on port %d\n", port);
-}
-
static int
rtl8366rb_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
@@ -1226,7 +1169,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port,
if (ret)
return ret;
- rb8366rb_set_port_led(priv, port, true);
return 0;
}
@@ -1241,8 +1183,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
BIT(port));
if (ret)
return;
-
- rb8366rb_set_port_led(priv, port, false);
}
static int
@@ -1335,7 +1275,7 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
rb = priv->chip_data;
dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port,
- vlan_filtering ? "enable" : "disable");
+ str_enable_disable(vlan_filtering));
/* If the port is not in the member set, the frame will be dropped */
ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
@@ -1697,7 +1637,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan
static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
{
- dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable");
+ dev_dbg(priv->dev, "%s VLAN\n", str_enable_disable(enable));
return regmap_update_bits(priv->map,
RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
enable ? RTL8366RB_SGCR_EN_VLAN : 0);
@@ -1705,7 +1645,7 @@ static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable)
{
- dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
+ dev_dbg(priv->dev, "%s VLAN 4k\n", str_enable_disable(enable));
return regmap_update_bits(priv->map, RTL8366RB_SGCR,
RTL8366RB_SGCR_EN_VLAN_4KTB,
enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
@@ -1849,12 +1789,16 @@ static int rtl8366rb_detect(struct realtek_priv *priv)
return 0;
}
+static const struct phylink_mac_ops rtl8366rb_phylink_mac_ops = {
+ .mac_config = rtl8366rb_mac_config,
+ .mac_link_down = rtl8366rb_mac_link_down,
+ .mac_link_up = rtl8366rb_mac_link_up,
+};
+
static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.get_tag_protocol = rtl8366_get_tag_protocol,
.setup = rtl8366rb_setup,
.phylink_get_caps = rtl8366rb_phylink_get_caps,
- .phylink_mac_link_up = rtl8366rb_mac_link_up,
- .phylink_mac_link_down = rtl8366rb_mac_link_down,
.get_strings = rtl8366_get_strings,
.get_ethtool_stats = rtl8366_get_ethtool_stats,
.get_sset_count = rtl8366_get_sset_count,
@@ -1892,6 +1836,7 @@ static const struct realtek_ops rtl8366rb_ops = {
const struct realtek_variant rtl8366rb_variant = {
.ds_ops = &rtl8366rb_switch_ops,
.ops = &rtl8366rb_ops,
+ .phylink_mac_ops = &rtl8366rb_phylink_mac_ops,
.clk_delay = 10,
.cmd_read = 0xa9,
.cmd_write = 0xa8,
@@ -1910,7 +1855,7 @@ static struct platform_driver rtl8366rb_smi_driver = {
.of_match_table = rtl8366rb_of_match,
},
.probe = realtek_smi_probe,
- .remove_new = realtek_smi_remove,
+ .remove = realtek_smi_remove,
.shutdown = realtek_smi_shutdown,
};
@@ -1952,4 +1897,4 @@ module_exit(rtl8366rb_exit);
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch");
MODULE_LICENSE("GPL");
-MODULE_IMPORT_NS(REALTEK_DSA);
+MODULE_IMPORT_NS("REALTEK_DSA");
diff --git a/drivers/net/dsa/realtek/rtl8366rb.h b/drivers/net/dsa/realtek/rtl8366rb.h
new file mode 100644
index 000000000000..685ff3275faa
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8366rb.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RTL8366RB_H
+#define _RTL8366RB_H
+
+#include "realtek.h"
+
+#define RTL8366RB_PORT_NUM_CPU 5
+#define RTL8366RB_NUM_PORTS 6
+#define RTL8366RB_PHY_NO_MAX 4
+#define RTL8366RB_NUM_LEDGROUPS 4
+#define RTL8366RB_PHY_ADDR_MAX 31
+
+/* LED control registers */
+/* The LED blink rate is global; it is used by all triggers in all groups. */
+#define RTL8366RB_LED_BLINKRATE_REG 0x0430
+#define RTL8366RB_LED_BLINKRATE_MASK 0x0007
+#define RTL8366RB_LED_BLINKRATE_28MS 0x0000
+#define RTL8366RB_LED_BLINKRATE_56MS 0x0001
+#define RTL8366RB_LED_BLINKRATE_84MS 0x0002
+#define RTL8366RB_LED_BLINKRATE_111MS 0x0003
+#define RTL8366RB_LED_BLINKRATE_222MS 0x0004
+#define RTL8366RB_LED_BLINKRATE_446MS 0x0005
+
+/* LED trigger event for each group */
+#define RTL8366RB_LED_CTRL_REG 0x0431
+#define RTL8366RB_LED_CTRL_OFFSET(led_group) \
+ (4 * (led_group))
+#define RTL8366RB_LED_CTRL_MASK(led_group) \
+ (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group))
+
+/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only
+ * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is
+ * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored.
+ */
+#define RTL8366RB_LED_0_1_CTRL_REG 0x0432
+#define RTL8366RB_LED_2_3_CTRL_REG 0x0433
+#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \
+ ((led_group) <= 1 ? \
+ RTL8366RB_LED_0_1_CTRL_REG : \
+ RTL8366RB_LED_2_3_CTRL_REG)
+#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0)
+#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6)
+#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0)
+#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6)
+
+enum rtl8366_ledgroup_mode {
+ RTL8366RB_LEDGROUP_OFF = 0x0,
+ RTL8366RB_LEDGROUP_DUP_COL = 0x1,
+ RTL8366RB_LEDGROUP_LINK_ACT = 0x2,
+ RTL8366RB_LEDGROUP_SPD1000 = 0x3,
+ RTL8366RB_LEDGROUP_SPD100 = 0x4,
+ RTL8366RB_LEDGROUP_SPD10 = 0x5,
+ RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6,
+ RTL8366RB_LEDGROUP_SPD100_ACT = 0x7,
+ RTL8366RB_LEDGROUP_SPD10_ACT = 0x8,
+ RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9,
+ RTL8366RB_LEDGROUP_FIBER = 0xa,
+ RTL8366RB_LEDGROUP_AN_FAULT = 0xb,
+ RTL8366RB_LEDGROUP_LINK_RX = 0xc,
+ RTL8366RB_LEDGROUP_LINK_TX = 0xd,
+ RTL8366RB_LEDGROUP_MASTER = 0xe,
+ RTL8366RB_LEDGROUP_FORCE = 0xf,
+
+ __RTL8366RB_LEDGROUP_MODE_MAX
+};
+
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS)
+
+struct rtl8366rb_led {
+ u8 port_num;
+ u8 led_group;
+ struct realtek_priv *priv;
+ struct led_classdev cdev;
+};
+
+int rtl8366rb_setup_leds(struct realtek_priv *priv);
+
+#else
+
+static inline int rtl8366rb_setup_leds(struct realtek_priv *priv)
+{
+ return 0;
+}
+
+#endif /* IS_ENABLED(CONFIG_LEDS_CLASS) */
+
+/**
+ * struct rtl8366rb - RTL8366RB-specific data
+ * @max_mtu: per-port max MTU setting
+ * @pvid_enabled: if PVID is set for respective port
+ * @leds: per-port and per-ledgroup led info
+ */
+struct rtl8366rb {
+ unsigned int max_mtu[RTL8366RB_NUM_PORTS];
+ bool pvid_enabled[RTL8366RB_NUM_PORTS];
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS)
+ struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS];
+#endif
+};
+
+/* This code is used also with LEDs disabled */
+int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv,
+ u8 led_group,
+ enum rtl8366_ledgroup_mode mode);
+
+#endif /* _RTL8366RB_H */
diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index d2e876805393..2b9bd4462714 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -25,7 +25,7 @@ void rtl83xx_lock(void *ctx)
mutex_lock(&priv->map_lock);
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, "REALTEK_DSA");
/**
* rtl83xx_unlock() - Unlocks the mutex used by regmaps
@@ -42,7 +42,7 @@ void rtl83xx_unlock(void *ctx)
mutex_unlock(&priv->map_lock);
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, "REALTEK_DSA");
static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum)
{
@@ -109,7 +109,7 @@ err_put_node:
return ret;
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, "REALTEK_DSA");
/**
* rtl83xx_probe() - probe a Realtek switch
@@ -185,11 +185,9 @@ rtl83xx_probe(struct device *dev,
/* TODO: if power is software controlled, set up any regulators here */
priv->reset_ctl = devm_reset_control_get_optional(dev, NULL);
- if (IS_ERR(priv->reset_ctl)) {
- ret = PTR_ERR(priv->reset_ctl);
- dev_err_probe(dev, ret, "failed to get reset control\n");
- return ERR_CAST(priv->reset_ctl);
- }
+ if (IS_ERR(priv->reset_ctl))
+ return dev_err_cast_probe(dev, priv->reset_ctl,
+ "failed to get reset control\n");
priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(priv->reset)) {
@@ -210,7 +208,7 @@ rtl83xx_probe(struct device *dev,
return priv;
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, "REALTEK_DSA");
/**
* rtl83xx_register_switch() - detects and register a switch
@@ -236,6 +234,7 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
ds->priv = priv;
ds->dev = priv->dev;
ds->ops = priv->variant->ds_ops;
+ ds->phylink_mac_ops = priv->variant->phylink_mac_ops;
ds->num_ports = priv->num_ports;
ret = dsa_register_switch(ds);
@@ -246,7 +245,7 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
return 0;
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, "REALTEK_DSA");
/**
* rtl83xx_unregister_switch() - unregister a switch
@@ -263,7 +262,7 @@ void rtl83xx_unregister_switch(struct realtek_priv *priv)
dsa_unregister_switch(ds);
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, "REALTEK_DSA");
/**
* rtl83xx_shutdown() - shutdown a switch
@@ -284,24 +283,21 @@ void rtl83xx_shutdown(struct realtek_priv *priv)
dev_set_drvdata(priv->dev, NULL);
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, "REALTEK_DSA");
/**
* rtl83xx_remove() - Cleanup a realtek switch driver
* @priv: realtek_priv pointer
*
- * If a method is provided, this function asserts the hard reset of the switch
- * in order to avoid leaking traffic when the driver is gone.
+ * Placehold for common cleanup procedures.
*
- * Context: Might sleep if priv->gdev->chip->can_sleep.
+ * Context: Any
* Return: nothing
*/
void rtl83xx_remove(struct realtek_priv *priv)
{
- /* leave the device reset asserted */
- rtl83xx_reset_assert(priv);
}
-EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA);
+EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, "REALTEK_DSA");
void rtl83xx_reset_assert(struct realtek_priv *priv)
{
generated by cgit (git 2.34.1) at 2025-07-23 08:03:56 +0000