summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/sja1105/sja1105_spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_spi.c')
-rw-r--r--drivers/net/dsa/sja1105/sja1105_spi.c409
1 files changed, 176 insertions, 233 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 58dd37ecde17..29b127f3bf9c 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -7,42 +7,15 @@
#include <linux/packing.h>
#include "sja1105.h"
-#define SJA1105_SIZE_PORT_CTRL 4
#define SJA1105_SIZE_RESET_CMD 4
#define SJA1105_SIZE_SPI_MSG_HEADER 4
#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4)
-#define SJA1105_SIZE_SPI_TRANSFER_MAX \
- (SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN)
-static int sja1105_spi_transfer(const struct sja1105_private *priv,
- const void *tx, void *rx, int size)
-{
- struct spi_device *spi = priv->spidev;
- struct spi_transfer transfer = {
- .tx_buf = tx,
- .rx_buf = rx,
- .len = size,
- };
- struct spi_message msg;
- int rc;
-
- if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) {
- dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n",
- size, SJA1105_SIZE_SPI_TRANSFER_MAX);
- return -EMSGSIZE;
- }
-
- spi_message_init(&msg);
- spi_message_add_tail(&transfer, &msg);
-
- rc = spi_sync(spi, &msg);
- if (rc < 0) {
- dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
- return rc;
- }
-
- return rc;
-}
+struct sja1105_chunk {
+ u8 *buf;
+ size_t len;
+ u64 reg_addr;
+};
static void
sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
@@ -56,242 +29,219 @@ sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
sja1105_pack(buf, &msg->address, 24, 4, size);
}
+#define sja1105_hdr_xfer(xfers, chunk) \
+ ((xfers) + 2 * (chunk))
+#define sja1105_chunk_xfer(xfers, chunk) \
+ ((xfers) + 2 * (chunk) + 1)
+#define sja1105_hdr_buf(hdr_bufs, chunk) \
+ ((hdr_bufs) + (chunk) * SJA1105_SIZE_SPI_MSG_HEADER)
+
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
- * address reg_addr, taking size_bytes from *packed_buf
+ * address reg_addr, taking @len bytes from *buf
* - SPI_READ: creates and sends an SPI read message from absolute
- * address reg_addr, writing size_bytes into *packed_buf
- *
- * This function should only be called if it is priorly known that
- * @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers
- * are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below.
+ * address reg_addr, writing @len bytes into *buf
*/
-int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
- sja1105_spi_rw_mode_t rw, u64 reg_addr,
- void *packed_buf, size_t size_bytes)
+static int sja1105_xfer(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf,
+ size_t len, struct ptp_system_timestamp *ptp_sts)
{
- u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
- u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
- const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER;
- struct sja1105_spi_message msg = {0};
- int rc;
+ struct sja1105_chunk chunk = {
+ .len = min_t(size_t, len, SJA1105_SIZE_SPI_MSG_MAXLEN),
+ .reg_addr = reg_addr,
+ .buf = buf,
+ };
+ struct spi_device *spi = priv->spidev;
+ struct spi_transfer *xfers;
+ int num_chunks;
+ int rc, i = 0;
+ u8 *hdr_bufs;
- if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX)
- return -ERANGE;
+ num_chunks = DIV_ROUND_UP(len, SJA1105_SIZE_SPI_MSG_MAXLEN);
- msg.access = rw;
- msg.address = reg_addr;
- if (rw == SPI_READ)
- msg.read_count = size_bytes / 4;
+ /* One transfer for each message header, one for each message
+ * payload (chunk).
+ */
+ xfers = kcalloc(2 * num_chunks, sizeof(struct spi_transfer),
+ GFP_KERNEL);
+ if (!xfers)
+ return -ENOMEM;
- sja1105_spi_message_pack(tx_buf, &msg);
+ /* Packed buffers for the num_chunks SPI message headers,
+ * stored as a contiguous array
+ */
+ hdr_bufs = kcalloc(num_chunks, SJA1105_SIZE_SPI_MSG_HEADER,
+ GFP_KERNEL);
+ if (!hdr_bufs) {
+ kfree(xfers);
+ return -ENOMEM;
+ }
- if (rw == SPI_WRITE)
- memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
- packed_buf, size_bytes);
+ for (i = 0; i < num_chunks; i++) {
+ struct spi_transfer *chunk_xfer = sja1105_chunk_xfer(xfers, i);
+ struct spi_transfer *hdr_xfer = sja1105_hdr_xfer(xfers, i);
+ u8 *hdr_buf = sja1105_hdr_buf(hdr_bufs, i);
+ struct spi_transfer *ptp_sts_xfer;
+ struct sja1105_spi_message msg;
+
+ /* Populate the transfer's header buffer */
+ msg.address = chunk.reg_addr;
+ msg.access = rw;
+ if (rw == SPI_READ)
+ msg.read_count = chunk.len / 4;
+ else
+ /* Ignored */
+ msg.read_count = 0;
+ sja1105_spi_message_pack(hdr_buf, &msg);
+ hdr_xfer->tx_buf = hdr_buf;
+ hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER;
+
+ /* Populate the transfer's data buffer */
+ if (rw == SPI_READ)
+ chunk_xfer->rx_buf = chunk.buf;
+ else
+ chunk_xfer->tx_buf = chunk.buf;
+ chunk_xfer->len = chunk.len;
+
+ /* Request timestamping for the transfer. Instead of letting
+ * callers specify which byte they want to timestamp, we can
+ * make certain assumptions:
+ * - A read operation will request a software timestamp when
+ * what's being read is the PTP time. That is snapshotted by
+ * the switch hardware at the end of the command portion
+ * (hdr_xfer).
+ * - A write operation will request a software timestamp on
+ * actions that modify the PTP time. Taking clock stepping as
+ * an example, the switch writes the PTP time at the end of
+ * the data portion (chunk_xfer).
+ */
+ if (rw == SPI_READ)
+ ptp_sts_xfer = hdr_xfer;
+ else
+ ptp_sts_xfer = chunk_xfer;
+ ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1;
+ ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1;
+ ptp_sts_xfer->ptp_sts = ptp_sts;
+
+ /* Calculate next chunk */
+ chunk.buf += chunk.len;
+ chunk.reg_addr += chunk.len / 4;
+ chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf),
+ SJA1105_SIZE_SPI_MSG_MAXLEN);
+
+ /* De-assert the chip select after each chunk. */
+ if (chunk.len)
+ chunk_xfer->cs_change = 1;
+ }
- rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len);
+ rc = spi_sync_transfer(spi, xfers, 2 * num_chunks);
if (rc < 0)
- return rc;
+ dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
- if (rw == SPI_READ)
- memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
- size_bytes);
+ kfree(hdr_bufs);
+ kfree(xfers);
- return 0;
+ return rc;
+}
+
+int sja1105_xfer_buf(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr,
+ u8 *buf, size_t len)
+{
+ return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL);
}
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
- * address reg_addr, taking size_bytes from *packed_buf
+ * address reg_addr
* - SPI_READ: creates and sends an SPI read message from absolute
- * address reg_addr, writing size_bytes into *packed_buf
+ * address reg_addr
*
* The u64 *value is unpacked, meaning that it's stored in the native
* CPU endianness and directly usable by software running on the core.
- *
- * This is a wrapper around sja1105_spi_send_packed_buf().
*/
-int sja1105_spi_send_int(const struct sja1105_private *priv,
- sja1105_spi_rw_mode_t rw, u64 reg_addr,
- u64 *value, u64 size_bytes)
+int sja1105_xfer_u64(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value,
+ struct ptp_system_timestamp *ptp_sts)
{
- u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN];
+ u8 packed_buf[8];
int rc;
- if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN)
- return -ERANGE;
-
if (rw == SPI_WRITE)
- sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0,
- size_bytes);
+ sja1105_pack(packed_buf, value, 63, 0, 8);
- rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf,
- size_bytes);
+ rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts);
if (rw == SPI_READ)
- sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0,
- size_bytes);
+ sja1105_unpack(packed_buf, value, 63, 0, 8);
return rc;
}
-/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN
- * must be sent/received. Splitting the buffer into chunks and assembling
- * those into SPI messages is done automatically by this function.
- */
-int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv,
- sja1105_spi_rw_mode_t rw, u64 base_addr,
- void *packed_buf, u64 buf_len)
+/* Same as above, but transfers only a 4 byte word */
+int sja1105_xfer_u32(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value,
+ struct ptp_system_timestamp *ptp_sts)
{
- struct chunk {
- void *buf_ptr;
- int len;
- u64 spi_address;
- } chunk;
- int distance_to_end;
+ u8 packed_buf[4];
+ u64 tmp;
int rc;
- /* Initialize chunk */
- chunk.buf_ptr = packed_buf;
- chunk.spi_address = base_addr;
- chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN);
-
- while (chunk.len) {
- rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address,
- chunk.buf_ptr, chunk.len);
- if (rc < 0)
- return rc;
-
- chunk.buf_ptr += chunk.len;
- chunk.spi_address += chunk.len / 4;
- distance_to_end = (uintptr_t)(packed_buf + buf_len -
- chunk.buf_ptr);
- chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN);
+ if (rw == SPI_WRITE) {
+ /* The packing API only supports u64 as CPU word size,
+ * so we need to convert.
+ */
+ tmp = *value;
+ sja1105_pack(packed_buf, &tmp, 31, 0, 4);
}
- return 0;
-}
+ rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts);
-/* Back-ported structure from UM11040 Table 112.
- * Reset control register (addr. 100440h)
- * In the SJA1105 E/T, only warm_rst and cold_rst are
- * supported (exposed in UM10944 as rst_ctrl), but the bit
- * offsets of warm_rst and cold_rst are actually reversed.
- */
-struct sja1105_reset_cmd {
- u64 switch_rst;
- u64 cfg_rst;
- u64 car_rst;
- u64 otp_rst;
- u64 warm_rst;
- u64 cold_rst;
- u64 por_rst;
-};
-
-static void
-sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
-{
- const int size = SJA1105_SIZE_RESET_CMD;
-
- memset(buf, 0, size);
-
- sja1105_pack(buf, &reset->cold_rst, 3, 3, size);
- sja1105_pack(buf, &reset->warm_rst, 2, 2, size);
-}
-
-static void
-sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
-{
- const int size = SJA1105_SIZE_RESET_CMD;
-
- memset(buf, 0, size);
+ if (rw == SPI_READ) {
+ sja1105_unpack(packed_buf, &tmp, 31, 0, 4);
+ *value = tmp;
+ }
- sja1105_pack(buf, &reset->switch_rst, 8, 8, size);
- sja1105_pack(buf, &reset->cfg_rst, 7, 7, size);
- sja1105_pack(buf, &reset->car_rst, 5, 5, size);
- sja1105_pack(buf, &reset->otp_rst, 4, 4, size);
- sja1105_pack(buf, &reset->warm_rst, 3, 3, size);
- sja1105_pack(buf, &reset->cold_rst, 2, 2, size);
- sja1105_pack(buf, &reset->por_rst, 1, 1, size);
+ return rc;
}
-static int sja1105et_reset_cmd(const void *ctx, const void *data)
+static int sja1105et_reset_cmd(struct dsa_switch *ds)
{
- const struct sja1105_private *priv = ctx;
- const struct sja1105_reset_cmd *reset = data;
+ struct sja1105_private *priv = ds->priv;
const struct sja1105_regs *regs = priv->info->regs;
- struct device *dev = priv->ds->dev;
- u8 packed_buf[SJA1105_SIZE_RESET_CMD];
-
- if (reset->switch_rst ||
- reset->cfg_rst ||
- reset->car_rst ||
- reset->otp_rst ||
- reset->por_rst) {
- dev_err(dev, "Only warm and cold reset is supported "
- "for SJA1105 E/T!\n");
- return -EINVAL;
- }
-
- if (reset->warm_rst)
- dev_dbg(dev, "Warm reset requested\n");
- if (reset->cold_rst)
- dev_dbg(dev, "Cold reset requested\n");
+ u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0};
+ const int size = SJA1105_SIZE_RESET_CMD;
+ u64 cold_rst = 1;
- sja1105et_reset_cmd_pack(packed_buf, reset);
+ sja1105_pack(packed_buf, &cold_rst, 3, 3, size);
- return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
- packed_buf, SJA1105_SIZE_RESET_CMD);
+ return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf,
+ SJA1105_SIZE_RESET_CMD);
}
-static int sja1105pqrs_reset_cmd(const void *ctx, const void *data)
+static int sja1105pqrs_reset_cmd(struct dsa_switch *ds)
{
- const struct sja1105_private *priv = ctx;
- const struct sja1105_reset_cmd *reset = data;
+ struct sja1105_private *priv = ds->priv;
const struct sja1105_regs *regs = priv->info->regs;
- struct device *dev = priv->ds->dev;
- u8 packed_buf[SJA1105_SIZE_RESET_CMD];
-
- if (reset->switch_rst)
- dev_dbg(dev, "Main reset for all functional modules requested\n");
- if (reset->cfg_rst)
- dev_dbg(dev, "Chip configuration reset requested\n");
- if (reset->car_rst)
- dev_dbg(dev, "Clock and reset control logic reset requested\n");
- if (reset->otp_rst)
- dev_dbg(dev, "OTP read cycle for reading product "
- "config settings requested\n");
- if (reset->warm_rst)
- dev_dbg(dev, "Warm reset requested\n");
- if (reset->cold_rst)
- dev_dbg(dev, "Cold reset requested\n");
- if (reset->por_rst)
- dev_dbg(dev, "Power-on reset requested\n");
-
- sja1105pqrs_reset_cmd_pack(packed_buf, reset);
-
- return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
- packed_buf, SJA1105_SIZE_RESET_CMD);
-}
+ u8 packed_buf[SJA1105_SIZE_RESET_CMD] = {0};
+ const int size = SJA1105_SIZE_RESET_CMD;
+ u64 cold_rst = 1;
-static int sja1105_cold_reset(const struct sja1105_private *priv)
-{
- struct sja1105_reset_cmd reset = {0};
+ sja1105_pack(packed_buf, &cold_rst, 2, 2, size);
- reset.cold_rst = 1;
- return priv->info->reset_cmd(priv, &reset);
+ return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgu, packed_buf,
+ SJA1105_SIZE_RESET_CMD);
}
int sja1105_inhibit_tx(const struct sja1105_private *priv,
unsigned long port_bitmap, bool tx_inhibited)
{
const struct sja1105_regs *regs = priv->info->regs;
- u64 inhibit_cmd;
+ u32 inhibit_cmd;
int rc;
- rc = sja1105_spi_send_int(priv, SPI_READ, regs->port_control,
- &inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
+ rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control,
+ &inhibit_cmd, NULL);
if (rc < 0)
return rc;
@@ -300,8 +250,8 @@ int sja1105_inhibit_tx(const struct sja1105_private *priv,
else
inhibit_cmd &= ~port_bitmap;
- return sja1105_spi_send_int(priv, SPI_WRITE, regs->port_control,
- &inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
+ return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control,
+ &inhibit_cmd, NULL);
}
struct sja1105_status {
@@ -339,9 +289,7 @@ static int sja1105_status_get(struct sja1105_private *priv,
u8 packed_buf[4];
int rc;
- rc = sja1105_spi_send_packed_buf(priv, SPI_READ,
- regs->status,
- packed_buf, 4);
+ rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4);
if (rc < 0)
return rc;
@@ -429,7 +377,7 @@ int sja1105_static_config_upload(struct sja1105_private *priv)
usleep_range(500, 1000);
do {
/* Put the SJA1105 in programming mode */
- rc = sja1105_cold_reset(priv);
+ rc = priv->info->reset_cmd(priv->ds);
if (rc < 0) {
dev_err(dev, "Failed to reset switch, retrying...\n");
continue;
@@ -437,9 +385,8 @@ int sja1105_static_config_upload(struct sja1105_private *priv)
/* Wait for the switch to come out of reset */
usleep_range(1000, 5000);
/* Upload the static config to the device */
- rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE,
- regs->config,
- config_buf, buf_len);
+ rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config,
+ config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Failed to upload config, retrying...\n");
continue;
@@ -482,12 +429,6 @@ int sja1105_static_config_upload(struct sja1105_private *priv)
dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
}
- rc = sja1105_ptp_reset(priv);
- if (rc < 0)
- dev_err(dev, "Failed to reset PTP clock: %d\n", rc);
-
- dev_info(dev, "Reset switch and programmed static config\n");
-
out:
kfree(config_buf);
return rc;
@@ -516,10 +457,11 @@ static struct sja1105_regs sja1105et_regs = {
.rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
.rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
.ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8},
+ .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */
.ptp_control = 0x17,
- .ptpclk = 0x18, /* Spans 0x18 to 0x19 */
+ .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */
.ptpclkrate = 0x1A,
- .ptptsclk = 0x1B, /* Spans 0x1B to 0x1C */
+ .ptpclkcorp = 0x1D,
};
static struct sja1105_regs sja1105pqrs_regs = {
@@ -547,10 +489,11 @@ static struct sja1105_regs sja1105pqrs_regs = {
.rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.qlevel = {0x604, 0x614, 0x624, 0x634, 0x644},
.ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0},
+ .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */
.ptp_control = 0x18,
- .ptpclk = 0x19,
+ .ptpclkval = 0x19,
.ptpclkrate = 0x1B,
- .ptptsclk = 0x1C,
+ .ptpclkcorp = 0x1E,
};
struct sja1105_info sja1105e_info = {
@@ -563,7 +506,7 @@ struct sja1105_info sja1105e_info = {
.reset_cmd = sja1105et_reset_cmd,
.fdb_add_cmd = sja1105et_fdb_add,
.fdb_del_cmd = sja1105et_fdb_del,
- .ptp_cmd = sja1105et_ptp_cmd,
+ .ptp_cmd_packing = sja1105et_ptp_cmd_packing,
.regs = &sja1105et_regs,
.name = "SJA1105E",
};
@@ -577,7 +520,7 @@ struct sja1105_info sja1105t_info = {
.reset_cmd = sja1105et_reset_cmd,
.fdb_add_cmd = sja1105et_fdb_add,
.fdb_del_cmd = sja1105et_fdb_del,
- .ptp_cmd = sja1105et_ptp_cmd,
+ .ptp_cmd_packing = sja1105et_ptp_cmd_packing,
.regs = &sja1105et_regs,
.name = "SJA1105T",
};
@@ -592,7 +535,7 @@ struct sja1105_info sja1105p_info = {
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
- .ptp_cmd = sja1105pqrs_ptp_cmd,
+ .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.regs = &sja1105pqrs_regs,
.name = "SJA1105P",
};
@@ -607,7 +550,7 @@ struct sja1105_info sja1105q_info = {
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
- .ptp_cmd = sja1105pqrs_ptp_cmd,
+ .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.regs = &sja1105pqrs_regs,
.name = "SJA1105Q",
};
@@ -622,7 +565,7 @@ struct sja1105_info sja1105r_info = {
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
- .ptp_cmd = sja1105pqrs_ptp_cmd,
+ .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.regs = &sja1105pqrs_regs,
.name = "SJA1105R",
};
@@ -638,6 +581,6 @@ struct sja1105_info sja1105s_info = {
.reset_cmd = sja1105pqrs_reset_cmd,
.fdb_add_cmd = sja1105pqrs_fdb_add,
.fdb_del_cmd = sja1105pqrs_fdb_del,
- .ptp_cmd = sja1105pqrs_ptp_cmd,
+ .ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.name = "SJA1105S",
};