diff options
Diffstat (limited to 'drivers/net/dsa')
133 files changed, 23523 insertions, 7084 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index f8c1d73b251d..7eb301fd987d 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -26,17 +26,12 @@ config NET_DSA_LOOP source "drivers/net/dsa/hirschmann/Kconfig" -config NET_DSA_LANTIQ_GSWIP - tristate "Lantiq / Intel GSWIP" - depends on HAS_IOMEM - select NET_DSA_TAG_GSWIP - help - This enables support for the Lantiq / Intel GSWIP 2.1 found in - the xrx200 / VR9 SoC. +source "drivers/net/dsa/lantiq/Kconfig" config NET_DSA_MT7530 tristate "MediaTek MT7530 and MT7531 Ethernet switch support" select NET_DSA_TAG_MTK + select REGMAP_IRQ imply NET_DSA_MT7530_MDIO imply NET_DSA_MT7530_MMIO help @@ -48,7 +43,7 @@ config NET_DSA_MT7530 config NET_DSA_MT7530_MDIO tristate "MediaTek MT7530 MDIO interface driver" depends on NET_DSA_MT7530 - imply MEDIATEK_GE_PHY + select MEDIATEK_GE_PHY select PCS_MTK_LYNXI help This enables support for the MediaTek MT7530 and MT7531 switch @@ -91,17 +86,26 @@ source "drivers/net/dsa/realtek/Kconfig" config NET_DSA_RZN1_A5PSW tristate "Renesas RZ/N1 A5PSW Ethernet switch support" - depends on OF && ARCH_RZN1 + depends on OF && (ARCH_RZN1 || COMPILE_TEST) select NET_DSA_TAG_RZN1_A5PSW select PCS_RZN1_MIIC help This driver supports the A5PSW switch, which is embedded in Renesas RZ/N1 SoC. +config NET_DSA_KS8995 + tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches" + depends on SPI + select NET_DSA_TAG_NONE + help + This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet + switches, managed over SPI. + config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 select REGMAP + imply SMSC_PHY help This enables support for the Microchip LAN9303/LAN9354 3 port ethernet switch chips. @@ -126,7 +130,7 @@ config NET_DSA_SMSC_LAN9303_MDIO config NET_DSA_VITESSE_VSC73XX tristate - select NET_DSA_TAG_NONE + select NET_DSA_TAG_VSC73XX_8021Q select FIXED_PHY select VITESSE_PHY select GPIOLIB @@ -150,4 +154,11 @@ config NET_DSA_VITESSE_VSC73XX_PLATFORM This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches, connected over a CPU-attached address bus and work in memory-mapped I/O mode. + +config NET_DSA_YT921X + tristate "Motorcomm YT9215 ethernet switch chip support" + select NET_DSA_TAG_YT921X + help + This enables support for the Motorcomm YT9215 ethernet switch + chip. endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index cb9a97340e58..16de4ba3fa38 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -2,10 +2,7 @@ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o -ifdef CONFIG_NET_DSA_LOOP -obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o -endif -obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o +obj-$(CONFIG_NET_DSA_KS8995) += ks8995.o obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o @@ -17,8 +14,10 @@ obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx-core.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM) += vitesse-vsc73xx-platform.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o +obj-$(CONFIG_NET_DSA_YT921X) += yt921x.o obj-y += b53/ obj-y += hirschmann/ +obj-y += lantiq/ obj-y += microchip/ obj-y += mv88e6xxx/ obj-y += ocelot/ diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig index ebaa4a80d544..915008e8eff5 100644 --- a/drivers/net/dsa/b53/Kconfig +++ b/drivers/net/dsa/b53/Kconfig @@ -5,6 +5,7 @@ menuconfig B53 select NET_DSA_TAG_NONE select NET_DSA_TAG_BRCM select NET_DSA_TAG_BRCM_LEGACY + select NET_DSA_TAG_BRCM_LEGACY_FCS select NET_DSA_TAG_BRCM_PREPEND help This driver adds support for Broadcom managed switch chips. It supports diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 4e27dc913cf7..a1a177713d99 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -21,12 +21,15 @@ #include <linux/export.h> #include <linux/gpio.h> #include <linux/kernel.h> +#include <linux/math.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/platform_data/b53.h> #include <linux/phy.h> #include <linux/phylink.h> #include <linux/etherdevice.h> #include <linux/if_bridge.h> +#include <linux/if_vlan.h> #include <net/dsa.h> #include "b53_regs.h" @@ -224,6 +227,9 @@ static const struct b53_mib_desc b53_mibs_58xx[] = { #define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx) +#define B53_MAX_MTU_25 (1536 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN) +#define B53_MAX_MTU (9720 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN) + static int b53_do_vlan_op(struct b53_device *dev, u8 op) { unsigned int i; @@ -322,6 +328,26 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, } } +static void b53_set_eap_mode(struct b53_device *dev, int port, int mode) +{ + u64 eap_conf; + + if (is5325(dev) || is5365(dev) || dev->chip_id == BCM5389_DEVICE_ID) + return; + + b53_read64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), &eap_conf); + + if (is63xx(dev)) { + eap_conf &= ~EAP_MODE_MASK_63XX; + eap_conf |= (u64)mode << EAP_MODE_SHIFT_63XX; + } else { + eap_conf &= ~EAP_MODE_MASK; + eap_conf |= (u64)mode << EAP_MODE_SHIFT; + } + + b53_write64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), eap_conf); +} + static void b53_set_forwarding(struct b53_device *dev, int enable) { u8 mgmt; @@ -335,18 +361,23 @@ static void b53_set_forwarding(struct b53_device *dev, int enable) b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); - /* Include IMP port in dumb forwarding mode - */ - b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); - mgmt |= B53_MII_DUMB_FWDG_EN; - b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); + if (!is5325(dev)) { + /* Include IMP port in dumb forwarding mode */ + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); + mgmt |= B53_MII_DUMB_FWDG_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); - /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether - * frames should be flooded or not. - */ - b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); - mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN; - b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether + * frames should be flooded or not. + */ + b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); + mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IP_MC; + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + } else { + b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); + mgmt |= B53_IP_MC; + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + } } static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, @@ -369,15 +400,17 @@ static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); } + vc1 &= ~VC1_RX_MCST_FWD_EN; + if (enable) { vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; - vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; + vc1 |= VC1_RX_MCST_UNTAG_EN; vc4 &= ~VC4_ING_VID_CHECK_MASK; if (enable_filtering) { vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; vc5 |= VC5_DROP_VTABLE_MISS; } else { - vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + vc4 |= VC4_NO_ING_VID_CHK << VC4_ING_VID_CHECK_S; vc5 &= ~VC5_DROP_VTABLE_MISS; } @@ -389,7 +422,7 @@ static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, } else { vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); - vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); + vc1 &= ~VC1_RX_MCST_UNTAG_EN; vc4 &= ~VC4_ING_VID_CHECK_MASK; vc5 &= ~VC5_DROP_VTABLE_MISS; @@ -459,6 +492,9 @@ static int b53_flush_arl(struct b53_device *dev, u8 mask) { unsigned int i; + if (is5325(dev)) + return 0; + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); @@ -483,6 +519,9 @@ out: static int b53_fast_age_port(struct b53_device *dev, int port) { + if (is5325(dev)) + return 0; + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); return b53_flush_arl(dev, FAST_AGE_PORT); @@ -490,6 +529,9 @@ static int b53_fast_age_port(struct b53_device *dev, int port) static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) { + if (is5325(dev)) + return 0; + b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); return b53_flush_arl(dev, FAST_AGE_VLAN); @@ -501,6 +543,10 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) unsigned int i; u16 pvlan; + /* BCM5325 CPU port is at 8 */ + if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) + cpu_port = B53_CPU_PORT; + /* Enable the IMP port to be in the same VLAN as the other ports * on a per-port basis such that we only have Port i and IMP in * the same VLAN. @@ -518,12 +564,24 @@ static void b53_port_set_ucast_flood(struct b53_device *dev, int port, { u16 uc; - b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); - if (unicast) - uc |= BIT(port); - else - uc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); + if (is5325(dev)) { + if (port == B53_CPU_PORT_25) + port = B53_CPU_PORT; + + b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, &uc); + if (unicast) + uc |= BIT(port) | B53_IEEE_UCAST_DROP_EN; + else + uc &= ~BIT(port); + b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, uc); + } else { + b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); + if (unicast) + uc |= BIT(port); + else + uc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); + } } static void b53_port_set_mcast_flood(struct b53_device *dev, int port, @@ -531,19 +589,31 @@ static void b53_port_set_mcast_flood(struct b53_device *dev, int port, { u16 mc; - b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); - if (multicast) - mc |= BIT(port); - else - mc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); + if (is5325(dev)) { + if (port == B53_CPU_PORT_25) + port = B53_CPU_PORT; - b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); - if (multicast) - mc |= BIT(port); - else - mc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); + b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, &mc); + if (multicast) + mc |= BIT(port) | B53_IEEE_MCAST_DROP_EN; + else + mc &= ~BIT(port); + b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, mc); + } else { + b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); + + b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); + } } static void b53_port_set_learning(struct b53_device *dev, int port, @@ -551,6 +621,9 @@ static void b53_port_set_learning(struct b53_device *dev, int port, { u16 reg; + if (is5325(dev)) + return; + b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®); if (learning) reg &= ~BIT(port); @@ -559,6 +632,71 @@ static void b53_port_set_learning(struct b53_device *dev, int port, b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); } +static void b53_port_set_isolated(struct b53_device *dev, int port, + bool isolated) +{ + u8 offset; + u16 reg; + + if (is5325(dev)) + offset = B53_PROTECTED_PORT_SEL_25; + else + offset = B53_PROTECTED_PORT_SEL; + + b53_read16(dev, B53_CTRL_PAGE, offset, ®); + if (isolated) + reg |= BIT(port); + else + reg &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, offset, reg); +} + +static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) +{ + struct b53_device *dev = ds->priv; + u16 reg; + + b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); + if (enable) + reg |= BIT(port); + else + reg &= ~BIT(port); + b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); +} + +int b53_setup_port(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + + b53_port_set_ucast_flood(dev, port, true); + b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); + b53_port_set_isolated(dev, port, false); + + /* Force all traffic to go to the CPU port to prevent the ASIC from + * trying to forward to bridged ports on matching FDB entries, then + * dropping frames because it isn't allowed to forward there. + */ + if (dsa_is_user_port(ds, port)) + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + + if (is5325(dev) && + in_range(port, 1, 4)) { + u8 reg; + + b53_read8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, ®); + reg &= ~PD_MODE_POWER_DOWN_PORT(0); + if (dsa_is_unused_port(ds, port)) + reg |= PD_MODE_POWER_DOWN_PORT(port); + else + reg &= ~PD_MODE_POWER_DOWN_PORT(port); + b53_write8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, reg); + } + + return 0; +} +EXPORT_SYMBOL(b53_setup_port); + int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct b53_device *dev = ds->priv; @@ -571,9 +709,8 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - b53_port_set_ucast_flood(dev, port, true); - b53_port_set_mcast_flood(dev, port, true); - b53_port_set_learning(dev, port, false); + if (dev->ops->phy_enable) + dev->ops->phy_enable(dev, port); if (dev->ops->irq_enable) ret = dev->ops->irq_enable(dev, port); @@ -613,6 +750,9 @@ void b53_disable_port(struct dsa_switch *ds, int port) reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); + if (dev->ops->phy_disable) + dev->ops->phy_disable(dev, port); + if (dev->ops->irq_disable) dev->ops->irq_disable(dev, port); } @@ -657,6 +797,11 @@ void b53_brcm_hdr_setup(struct dsa_switch *ds, int port) hdr_ctl |= GC_FRM_MGMT_PORT_M; b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl); + /* B53_BRCM_HDR not present on devices with legacy tags */ + if (dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY || + dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY_FCS) + return; + /* Enable Broadcom tags for IMP port */ b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl); if (tag_en) @@ -705,10 +850,6 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port) b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); b53_brcm_hdr_setup(dev->ds, port); - - b53_port_set_ucast_flood(dev, port, true); - b53_port_set_mcast_flood(dev, port, true); - b53_port_set_learning(dev, port, false); } static void b53_enable_mib(struct b53_device *dev) @@ -720,12 +861,18 @@ static void b53_enable_mib(struct b53_device *dev) b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); } +static void b53_enable_stp(struct b53_device *dev) +{ + u8 gc; + + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + gc |= GC_RX_BPDU_EN; + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); +} + static u16 b53_default_pvid(struct b53_device *dev) { - if (is5325(dev) || is5365(dev)) - return 1; - else - return 0; + return 0; } static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) @@ -735,6 +882,22 @@ static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); } +static bool b53_vlan_port_may_join_untagged(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + struct dsa_port *dp; + + if (!dev->vlan_filtering) + return true; + + dp = dsa_to_port(ds, port); + + if (dsa_port_is_cpu(dp)) + return true; + + return dp->bridge == NULL; +} + int b53_configure_vlan(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; @@ -753,34 +916,47 @@ int b53_configure_vlan(struct dsa_switch *ds) b53_do_vlan_op(dev, VTA_CMD_CLEAR); } - b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); + b53_enable_vlan(dev, -1, dev->vlan_enabled, dev->vlan_filtering); /* Create an untagged VLAN entry for the default PVID in case * CONFIG_VLAN_8021Q is disabled and there are no calls to - * dsa_slave_vlan_rx_add_vid() to create the default VLAN + * dsa_user_vlan_rx_add_vid() to create the default VLAN * entry. Do this only when the tagging protocol is not * DSA_TAG_PROTO_NONE */ + v = &dev->vlans[def_vid]; b53_for_each_port(dev, i) { - v = &dev->vlans[def_vid]; - v->members |= BIT(i); + if (!b53_vlan_port_may_join_untagged(ds, i)) + continue; + + vl.members |= BIT(i); if (!b53_vlan_port_needs_forced_tagged(ds, i)) - v->untag = v->members; - b53_write16(dev, B53_VLAN_PAGE, - B53_VLAN_PORT_DEF_TAG(i), def_vid); + vl.untag = vl.members; + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(i), + def_vid); } + b53_set_vlan_entry(dev, def_vid, &vl); - /* Upon initial call we have not set-up any VLANs, but upon - * system resume, we need to restore all VLAN entries. - */ - for (vid = def_vid; vid < dev->num_vlans; vid++) { - v = &dev->vlans[vid]; + if (dev->vlan_filtering) { + /* Upon initial call we have not set-up any VLANs, but upon + * system resume, we need to restore all VLAN entries. + */ + for (vid = def_vid + 1; vid < dev->num_vlans; vid++) { + v = &dev->vlans[vid]; - if (!v->members) - continue; + if (!v->members) + continue; - b53_set_vlan_entry(dev, vid, v); - b53_fast_age_vlan(dev, vid); + b53_set_vlan_entry(dev, vid, v); + b53_fast_age_vlan(dev, vid); + } + + b53_for_each_port(dev, i) { + if (!dsa_is_cpu_port(ds, i)) + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), + dev->ports[i].pvid); + } } return 0; @@ -859,6 +1035,7 @@ static int b53_switch_reset(struct b53_device *dev) } b53_enable_mib(dev); + b53_enable_stp(dev); return b53_flush_arl(dev, FAST_AGE_STATIC); } @@ -958,7 +1135,7 @@ static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port) return NULL; } - return mdiobus_get_phy(ds->slave_mii_bus, port); + return mdiobus_get_phy(ds->user_mii_bus, port); } void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, @@ -972,8 +1149,7 @@ void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, if (stringset == ETH_SS_STATS) { for (i = 0; i < mib_size; i++) - strscpy(data + i * ETH_GSTRING_LEN, - mibs[i].name, ETH_GSTRING_LEN); + ethtool_puts(&data, mibs[i].name); } else if (stringset == ETH_SS_PHY_STATS) { phydev = b53_get_phy_device(ds, port); if (!phydev) @@ -1099,7 +1275,9 @@ EXPORT_SYMBOL(b53_setup_devlink_resources); static int b53_setup(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; + struct b53_vlan *vl; unsigned int port; + u16 pvid; int ret; /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set @@ -1107,12 +1285,36 @@ static int b53_setup(struct dsa_switch *ds) */ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; + /* The switch does not tell us the original VLAN for untagged + * packets, so keep the CPU port always tagged. + */ + ds->untag_vlan_aware_bridge_pvid = true; + + if (dev->chip_id == BCM53101_DEVICE_ID) { + /* BCM53101 uses 0.5 second increments */ + ds->ageing_time_min = 1 * 500; + ds->ageing_time_max = AGE_TIME_MAX * 500; + } else { + /* Everything else uses 1 second increments */ + ds->ageing_time_min = 1 * 1000; + ds->ageing_time_max = AGE_TIME_MAX * 1000; + } + ret = b53_reset_switch(dev); if (ret) { dev_err(ds->dev, "failed to reset switch\n"); return ret; } + /* setup default vlan for filtering mode */ + pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + b53_for_each_port(dev, port) { + vl->members |= BIT(port); + if (!b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag |= BIT(port); + } + b53_reset_mib(dev); ret = b53_apply_config(dev); @@ -1147,6 +1349,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link) if (port == dev->imp_port) { off = B53_PORT_OVERRIDE_CTRL; val = PORT_OVERRIDE_EN; + } else if (is5325(dev)) { + return; } else { off = B53_GMII_PORT_OVERRIDE_CTRL(port); val = GMII_PO_EN; @@ -1171,6 +1375,8 @@ static void b53_force_port_config(struct b53_device *dev, int port, if (port == dev->imp_port) { off = B53_PORT_OVERRIDE_CTRL; val = PORT_OVERRIDE_EN; + } else if (is5325(dev)) { + return; } else { off = B53_GMII_PORT_OVERRIDE_CTRL(port); val = GMII_PO_EN; @@ -1183,6 +1389,10 @@ static void b53_force_port_config(struct b53_device *dev, int port, else reg &= ~PORT_OVERRIDE_FULL_DUPLEX; + reg &= ~(0x3 << GMII_PO_SPEED_S); + if (is5301x(dev) || is58xx(dev)) + reg &= ~PORT_OVERRIDE_SPEED_2000M; + switch (speed) { case 2000: reg |= PORT_OVERRIDE_SPEED_2000M; @@ -1201,10 +1411,24 @@ static void b53_force_port_config(struct b53_device *dev, int port, return; } - if (rx_pause) - reg |= PORT_OVERRIDE_RX_FLOW; - if (tx_pause) - reg |= PORT_OVERRIDE_TX_FLOW; + if (is5325(dev)) + reg &= ~PORT_OVERRIDE_LP_FLOW_25; + else + reg &= ~(PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW); + + if (rx_pause) { + if (is5325(dev)) + reg |= PORT_OVERRIDE_LP_FLOW_25; + else + reg |= PORT_OVERRIDE_RX_FLOW; + } + + if (tx_pause) { + if (is5325(dev)) + reg |= PORT_OVERRIDE_LP_FLOW_25; + else + reg |= PORT_OVERRIDE_TX_FLOW; + } b53_write8(dev, B53_CTRL_PAGE, off, reg); } @@ -1213,135 +1437,88 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port, phy_interface_t interface) { struct b53_device *dev = ds->priv; - u8 rgmii_ctrl = 0, off; + u8 rgmii_ctrl = 0; - if (port == dev->imp_port) - off = B53_RGMII_CTRL_IMP; - else - off = B53_RGMII_CTRL_P(port); + b53_read8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + if (is6318_268(dev)) + rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; - switch (interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC); - rgmii_ctrl |= RGMII_CTRL_DLL_RXC; - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC); - rgmii_ctrl |= RGMII_CTRL_DLL_TXC; - break; - case PHY_INTERFACE_MODE_RGMII: - default: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - } + rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - if (port != dev->imp_port) { - if (is63268(dev)) - rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; - - rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - } - - b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + b53_write8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), rgmii_ctrl); dev_dbg(ds->dev, "Configured port %d for %s\n", port, phy_modes(interface)); } -static void b53_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) +static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port, + phy_interface_t interface) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; - u8 rgmii_ctrl = 0, reg = 0, off; - bool tx_pause = false; - bool rx_pause = false; + u8 rgmii_ctrl = 0, off; - if (!phy_is_pseudo_fixed_link(phydev)) - return; + if (port == dev->imp_port) + off = B53_RGMII_CTRL_IMP; + else + off = B53_RGMII_CTRL_P(port); - /* Enable flow control on BCM5301x's CPU port */ - if (is5301x(dev) && dsa_is_cpu_port(ds, port)) - tx_pause = rx_pause = true; + /* Configure the port RGMII clock delay by DLL disabled and + * tx_clk aligned timing (restoring to reset defaults) + */ + b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - if (phydev->pause) { - if (phydev->asym_pause) - tx_pause = true; - rx_pause = true; - } + /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make + * sure that we enable the port TX clock internal delay to + * account for this internal delay that is inserted, otherwise + * the switch won't be able to receive correctly. + * + * PHY_INTERFACE_MODE_RGMII means that we are not introducing + * any delay neither on transmission nor reception, so the + * BCM53125 must also be configured accordingly to account for + * the lack of delay and introduce + * + * The BCM53125 switch has its RX clock and TX clock control + * swapped, hence the reason why we modify the TX clock path in + * the "RGMII" case + */ + if (interface == PHY_INTERFACE_MODE_RGMII_TXID) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC; + if (interface == PHY_INTERFACE_MODE_RGMII) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; - b53_force_port_config(dev, port, phydev->speed, phydev->duplex, - tx_pause, rx_pause); - b53_force_link(dev, port, phydev->link); + if (dev->chip_id != BCM53115_DEVICE_ID) + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; - if (is63xx(dev) && port >= B53_63XX_RGMII0) - b53_adjust_63xx_rgmii(ds, port, phydev->interface); + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); - if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { - if (port == dev->imp_port) - off = B53_RGMII_CTRL_IMP; - else - off = B53_RGMII_CTRL_P(port); + dev_info(ds->dev, "Configured port %d for %s\n", port, + phy_modes(interface)); +} - /* Configure the port RGMII clock delay by DLL disabled and - * tx_clk aligned timing (restoring to reset defaults) - */ - b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | - RGMII_CTRL_TIMING_SEL); - - /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make - * sure that we enable the port TX clock internal delay to - * account for this internal delay that is inserted, otherwise - * the switch won't be able to receive correctly. - * - * PHY_INTERFACE_MODE_RGMII means that we are not introducing - * any delay neither on transmission nor reception, so the - * BCM53125 must also be configured accordingly to account for - * the lack of delay and introduce - * - * The BCM53125 switch has its RX clock and TX clock control - * swapped, hence the reason why we modify the TX clock path in - * the "RGMII" case - */ - if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) - rgmii_ctrl |= RGMII_CTRL_DLL_TXC; - if (phydev->interface == PHY_INTERFACE_MODE_RGMII) - rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; - rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; - b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); +static void b53_adjust_5325_mii(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + u8 reg = 0; - dev_info(ds->dev, "Configured port %d for %s\n", port, - phy_modes(phydev->interface)); - } + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); - /* configure MII port if necessary */ - if (is5325(dev)) { + /* reverse mii needs to be enabled */ + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + reg | PORT_OVERRIDE_RV_MII_25); b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, ®); - /* reverse mii needs to be enabled */ if (!(reg & PORT_OVERRIDE_RV_MII_25)) { - b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, - reg | PORT_OVERRIDE_RV_MII_25); - b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, - ®); - - if (!(reg & PORT_OVERRIDE_RV_MII_25)) { - dev_err(ds->dev, - "Failed to enable reverse MII mode\n"); - return; - } + dev_err(ds->dev, + "Failed to enable reverse MII mode\n"); + return; } } - - /* Re-negotiate EEE if it was enabled already */ - p->eee_enabled = b53_eee_init(ds, port, phydev); } void b53_port_event(struct dsa_switch *ds, int port) @@ -1378,6 +1555,10 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); + /* BCM63xx RGMII ports support RGMII */ + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + phy_interface_set_rgmii(config->supported_interfaces); + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100; @@ -1395,33 +1576,54 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port, dev->ops->phylink_get_caps(dev, port, config); } -static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds, - int port, +static struct phylink_pcs *b53_phylink_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { - struct b53_device *dev = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct b53_device *dev = dp->ds->priv; if (!dev->ops->phylink_mac_select_pcs) return NULL; - return dev->ops->phylink_mac_select_pcs(dev, port, interface); + return dev->ops->phylink_mac_select_pcs(dev, dp->index, interface); } -void b53_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) +static void b53_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) { + struct dsa_port *dp = dsa_phylink_to_port(config); + phy_interface_t interface = state->interface; + struct dsa_switch *ds = dp->ds; + struct b53_device *dev = ds->priv; + int port = dp->index; + + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + b53_adjust_63xx_rgmii(ds, port, interface); + + if (mode == MLO_AN_FIXED) { + if (is531x5(dev) && phy_interface_mode_is_rgmii(interface)) + b53_adjust_531x5_rgmii(ds, port, interface); + + /* configure MII port if necessary */ + if (is5325(dev)) + b53_adjust_5325_mii(ds, port); + } } -EXPORT_SYMBOL(b53_phylink_mac_config); -void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) +static void b53_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) { - struct b53_device *dev = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct b53_device *dev = dp->ds->priv; + int port = dp->index; - if (mode == MLO_AN_PHY) + if (mode == MLO_AN_PHY) { + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + b53_force_link(dev, port, false); return; + } if (mode == MLO_AN_FIXED) { b53_force_link(dev, port, false); @@ -1432,24 +1634,38 @@ void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, dev->ops->serdes_link_set) dev->ops->serdes_link_set(dev, port, mode, interface, false); } -EXPORT_SYMBOL(b53_phylink_mac_link_down); -void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, - int speed, int duplex, - bool tx_pause, bool rx_pause) +static void b53_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) { + struct dsa_port *dp = dsa_phylink_to_port(config); + struct dsa_switch *ds = dp->ds; struct b53_device *dev = ds->priv; + struct ethtool_keee *p = &dev->ports[dp->index].eee; + int port = dp->index; - if (is63xx(dev) && port >= B53_63XX_RGMII0) - b53_adjust_63xx_rgmii(ds, port, interface); + if (mode == MLO_AN_PHY) { + /* Re-negotiate EEE if it was enabled already */ + p->eee_enabled = b53_eee_init(ds, port, phydev); + + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) { + b53_force_port_config(dev, port, speed, duplex, + tx_pause, rx_pause); + b53_force_link(dev, port, true); + } - if (mode == MLO_AN_PHY) return; + } if (mode == MLO_AN_FIXED) { + /* Force flow control on BCM5301x's CPU port */ + if (is5301x(dev) && dsa_is_cpu_port(ds, port)) + tx_pause = rx_pause = true; + b53_force_port_config(dev, port, speed, duplex, tx_pause, rx_pause); b53_force_link(dev, port, true); @@ -1460,14 +1676,16 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, dev->ops->serdes_link_set) dev->ops->serdes_link_set(dev, port, mode, interface, true); } -EXPORT_SYMBOL(b53_phylink_mac_link_up); int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, struct netlink_ext_ack *extack) { struct b53_device *dev = ds->priv; - b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering); + if (dev->vlan_filtering != vlan_filtering) { + dev->vlan_filtering = vlan_filtering; + b53_apply_config(dev); + } return 0; } @@ -1478,9 +1696,6 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port, { struct b53_device *dev = ds->priv; - if ((is5325(dev) || is5365(dev)) && vlan->vid == 0) - return -EOPNOTSUPP; - /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of * receiving VLAN tagged frames at all, we can still allow the port to * be configured for egress untagged. @@ -1492,7 +1707,7 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port, if (vlan->vid >= dev->num_vlans) return -ERANGE; - b53_enable_vlan(dev, port, true, ds->vlan_filtering); + b53_enable_vlan(dev, port, true, dev->vlan_filtering); return 0; } @@ -1505,18 +1720,29 @@ int b53_vlan_add(struct dsa_switch *ds, int port, bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; struct b53_vlan *vl; + u16 old_pvid, new_pvid; int err; err = b53_vlan_prepare(ds, port, vlan); if (err) return err; - vl = &dev->vlans[vlan->vid]; + if (vlan->vid == 0) + return 0; + + old_pvid = dev->ports[port].pvid; + if (pvid) + new_pvid = vlan->vid; + else if (!pvid && vlan->vid == old_pvid) + new_pvid = b53_default_pvid(dev); + else + new_pvid = old_pvid; + dev->ports[port].pvid = new_pvid; - b53_get_vlan_entry(dev, vlan->vid, vl); + vl = &dev->vlans[vlan->vid]; - if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev)) - untagged = true; + if (dsa_is_cpu_port(ds, port)) + untagged = false; vl->members |= BIT(port); if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) @@ -1524,13 +1750,16 @@ int b53_vlan_add(struct dsa_switch *ds, int port, else vl->untag &= ~BIT(port); + if (!dev->vlan_filtering) + return 0; + b53_set_vlan_entry(dev, vlan->vid, vl); b53_fast_age_vlan(dev, vlan->vid); - if (pvid && !dsa_is_cpu_port(ds, port)) { + if (!dsa_is_cpu_port(ds, port) && new_pvid != old_pvid) { b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), - vlan->vid); - b53_fast_age_vlan(dev, vlan->vid); + new_pvid); + b53_fast_age_vlan(dev, old_pvid); } return 0; @@ -1545,20 +1774,25 @@ int b53_vlan_del(struct dsa_switch *ds, int port, struct b53_vlan *vl; u16 pvid; - b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); + if (vlan->vid == 0) + return 0; + + pvid = dev->ports[port].pvid; vl = &dev->vlans[vlan->vid]; - b53_get_vlan_entry(dev, vlan->vid, vl); - vl->members &= ~BIT(port); if (pvid == vlan->vid) pvid = b53_default_pvid(dev); + dev->ports[port].pvid = pvid; if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) vl->untag &= ~(BIT(port)); + if (!dev->vlan_filtering) + return 0; + b53_set_vlan_entry(dev, vlan->vid, vl); b53_fast_age_vlan(dev, vlan->vid); @@ -1610,7 +1844,82 @@ static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) return b53_arl_op_wait(dev); } -static int b53_arl_read(struct b53_device *dev, u64 mac, +static void b53_arl_read_entry_25(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u8 vid_entry; + u64 mac_vid; + + b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_VID_ENTRY_25(idx), + &vid_entry); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_arl_to_entry_25(ent, mac_vid, vid_entry); +} + +static void b53_arl_write_entry_25(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u8 vid_entry; + u64 mac_vid; + + b53_arl_from_entry_25(&mac_vid, &vid_entry, ent); + b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_VID_ENTRY_25(idx), vid_entry); + b53_write64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + mac_vid); +} + +static void b53_arl_read_entry_89(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u64 mac_vid; + u16 fwd_entry; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), &fwd_entry); + b53_arl_to_entry_89(ent, mac_vid, fwd_entry); +} + +static void b53_arl_write_entry_89(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_arl_from_entry_89(&mac_vid, &fwd_entry, ent); + b53_write64(dev, B53_ARLIO_PAGE, + B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); + b53_write16(dev, B53_ARLIO_PAGE, + B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); +} + +static void b53_arl_read_entry_95(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), &fwd_entry); + b53_arl_to_entry(ent, mac_vid, fwd_entry); +} + +static void b53_arl_write_entry_95(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_arl_from_entry(&mac_vid, &fwd_entry, ent); + b53_write64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + mac_vid); + b53_write32(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), + fwd_entry); +} + +static int b53_arl_read(struct b53_device *dev, const u8 *mac, u16 vid, struct b53_arl_entry *ent, u8 *idx) { DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES); @@ -1625,23 +1934,15 @@ static int b53_arl_read(struct b53_device *dev, u64 mac, /* Read the bins */ for (i = 0; i < dev->num_arl_bins; i++) { - u64 mac_vid; - u32 fwd_entry; - - b53_read64(dev, B53_ARLIO_PAGE, - B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); - b53_read32(dev, B53_ARLIO_PAGE, - B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); - b53_arl_to_entry(ent, mac_vid, fwd_entry); + b53_arl_read_entry(dev, ent, i); - if (!(fwd_entry & ARLTBL_VALID)) { + if (!ent->is_valid) { set_bit(i, free_bins); continue; } - if ((mac_vid & ARLTBL_MAC_MASK) != mac) + if (!ether_addr_equal(ent->mac, mac)) continue; - if (dev->vlan_enabled && - ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid) + if (dev->vlan_enabled && ent->vid != vid) continue; *idx = i; return 0; @@ -1655,9 +1956,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, const unsigned char *addr, u16 vid, bool is_valid) { struct b53_arl_entry ent; - u32 fwd_entry; - u64 mac, mac_vid = 0; u8 idx = 0; + u64 mac; int ret; /* Convert the array into a 64-bit MAC */ @@ -1665,14 +1965,19 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, /* Perform a read for the given MAC and VID */ b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); - b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + if (!is5325m(dev)) { + if (is5325(dev) || is5365(dev)) + b53_write8(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + else + b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + } /* Issue a read operation for this MAC */ ret = b53_arl_rw_op(dev, 1); if (ret) return ret; - ret = b53_arl_read(dev, mac, vid, &ent, &idx); + ret = b53_arl_read(dev, addr, vid, &ent, &idx); /* If this is a read, just finish now */ if (op) @@ -1689,7 +1994,6 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, /* We could not find a matching MAC, so reset to a new entry */ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n", addr, vid, idx); - fwd_entry = 0; break; default: dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n", @@ -1716,12 +2020,7 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, ent.is_static = true; ent.is_age = false; memcpy(ent.mac, addr, ETH_ALEN); - b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); - - b53_write64(dev, B53_ARLIO_PAGE, - B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); - b53_write32(dev, B53_ARLIO_PAGE, - B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); + b53_arl_write_entry(dev, &ent, idx); return b53_arl_rw_op(dev, 0); } @@ -1733,12 +2032,6 @@ int b53_fdb_add(struct dsa_switch *ds, int port, struct b53_device *priv = ds->priv; int ret; - /* 5325 and 5365 require some more massaging, but could - * be supported eventually - */ - if (is5325(priv) || is5365(priv)) - return -EOPNOTSUPP; - mutex_lock(&priv->arl_mutex); ret = b53_arl_op(priv, 0, port, addr, vid, true); mutex_unlock(&priv->arl_mutex); @@ -1762,15 +2055,55 @@ int b53_fdb_del(struct dsa_switch *ds, int port, } EXPORT_SYMBOL(b53_fdb_del); +static void b53_read_arl_srch_ctl(struct b53_device *dev, u8 *val) +{ + u8 offset; + + if (is5325(dev) || is5365(dev)) + offset = B53_ARL_SRCH_CTL_25; + else if (dev->chip_id == BCM5389_DEVICE_ID || is5397_98(dev) || + is63xx(dev)) + offset = B53_ARL_SRCH_CTL_89; + else + offset = B53_ARL_SRCH_CTL; + + if (is63xx(dev)) { + u16 val16; + + b53_read16(dev, B53_ARLIO_PAGE, offset, &val16); + *val = val16 & 0xff; + } else { + b53_read8(dev, B53_ARLIO_PAGE, offset, val); + } +} + +static void b53_write_arl_srch_ctl(struct b53_device *dev, u8 val) +{ + u8 offset; + + if (is5325(dev) || is5365(dev)) + offset = B53_ARL_SRCH_CTL_25; + else if (dev->chip_id == BCM5389_DEVICE_ID || is5397_98(dev) || + is63xx(dev)) + offset = B53_ARL_SRCH_CTL_89; + else + offset = B53_ARL_SRCH_CTL; + + if (is63xx(dev)) + b53_write16(dev, B53_ARLIO_PAGE, offset, val); + else + b53_write8(dev, B53_ARLIO_PAGE, offset, val); +} + static int b53_arl_search_wait(struct b53_device *dev) { unsigned int timeout = 1000; u8 reg; do { - b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); + b53_read_arl_srch_ctl(dev, ®); if (!(reg & ARL_SRCH_STDN)) - return 0; + return -ENOENT; if (reg & ARL_SRCH_VLID) return 0; @@ -1781,16 +2114,52 @@ static int b53_arl_search_wait(struct b53_device *dev) return -ETIMEDOUT; } -static void b53_arl_search_rd(struct b53_device *dev, u8 idx, - struct b53_arl_entry *ent) +static void b53_arl_search_read_25(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + u64 mac_vid; + u8 ext; + + b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_EXT_25, &ext); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_25, + &mac_vid); + b53_arl_search_to_entry_25(ent, mac_vid, ext); +} + +static void b53_arl_search_read_89(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + u16 fwd_entry; + u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_MACVID_89, + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_89, &fwd_entry); + b53_arl_to_entry_89(ent, mac_vid, fwd_entry); +} + +static void b53_arl_search_read_63xx(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) { + u16 fwd_entry; u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_MACVID_63XX, + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_63XX, &fwd_entry); + b53_arl_search_to_entry_63xx(ent, mac_vid, fwd_entry); +} + +static void b53_arl_search_read_95(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ u32 fwd_entry; + u64 mac_vid; - b53_read64(dev, B53_ARLIO_PAGE, - B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); - b53_read32(dev, B53_ARLIO_PAGE, - B53_ARL_SRCH_RSTL(idx), &fwd_entry); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_MACVID(idx), + &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL(idx), + &fwd_entry); b53_arl_to_entry(ent, mac_vid, fwd_entry); } @@ -1809,30 +2178,31 @@ static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, int b53_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, void *data) { + unsigned int count = 0, results_per_hit = 1; struct b53_device *priv = ds->priv; struct b53_arl_entry results[2]; - unsigned int count = 0; int ret; - u8 reg; + + if (priv->num_arl_bins > 2) + results_per_hit = 2; mutex_lock(&priv->arl_mutex); /* Start search operation */ - reg = ARL_SRCH_STDN; - b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); + b53_write_arl_srch_ctl(priv, ARL_SRCH_STDN); do { ret = b53_arl_search_wait(priv); if (ret) break; - b53_arl_search_rd(priv, 0, &results[0]); + b53_arl_search_read(priv, 0, &results[0]); ret = b53_fdb_copy(port, &results[0], cb, data); if (ret) break; - if (priv->num_arl_bins > 2) { - b53_arl_search_rd(priv, 1, &results[1]); + if (results_per_hit == 2) { + b53_arl_search_read(priv, 1, &results[1]); ret = b53_fdb_copy(port, &results[1], cb, data); if (ret) break; @@ -1841,7 +2211,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port, break; } - } while (count++ < b53_max_arl_entries(priv) / 2); + } while (count++ < b53_max_arl_entries(priv) / results_per_hit); mutex_unlock(&priv->arl_mutex); @@ -1891,8 +2261,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, struct netlink_ext_ack *extack) { struct b53_device *dev = ds->priv; + struct b53_vlan *vl; s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - u16 pvlan, reg; + u16 pvlan, reg, pvid; unsigned int i; /* On 7278, port 7 which connects to the ASP should only receive @@ -1901,15 +2272,26 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, if (dev->chip_id == BCM7278_DEVICE_ID && port == 7) return -EINVAL; - /* Make this port leave the all VLANs join since we will have proper - * VLAN entries from now on - */ - if (is58xx(dev)) { - b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); - reg &= ~BIT(port); - if ((reg & BIT(cpu_port)) == BIT(cpu_port)) - reg &= ~BIT(cpu_port); - b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + + if (dev->vlan_filtering) { + /* Make this port leave the all VLANs join since we will have + * proper VLAN entries from now on + */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, + ®); + reg &= ~BIT(port); + if ((reg & BIT(cpu_port)) == BIT(cpu_port)) + reg &= ~BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, + reg); + } + + b53_get_vlan_entry(dev, pvid, vl); + vl->members &= ~BIT(port); + b53_set_vlan_entry(dev, pvid, vl); } b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); @@ -1929,6 +2311,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, pvlan |= BIT(i); } + /* Disable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_BASIC); + /* Configure the local port VLAN control membership to include * remote ports and update the local port bitmask */ @@ -1942,7 +2327,7 @@ EXPORT_SYMBOL(b53_br_join); void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) { struct b53_device *dev = ds->priv; - struct b53_vlan *vl = &dev->vlans[0]; + struct b53_vlan *vl; s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; unsigned int i; u16 pvlan, reg, pvid; @@ -1964,22 +2349,27 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) pvlan &= ~BIT(i); } + /* Enable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); dev->ports[port].vlan_ctl_mask = pvlan; pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + + if (dev->vlan_filtering) { + /* Make this port join all VLANs without VLAN entries */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); + reg |= BIT(port); + if (!(reg & BIT(cpu_port))) + reg |= BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + } - /* Make this port join all VLANs without VLAN entries */ - if (is58xx(dev)) { - b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); - reg |= BIT(port); - if (!(reg & BIT(cpu_port))) - reg |= BIT(cpu_port); - b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); - } else { b53_get_vlan_entry(dev, pvid, vl); - vl->members |= BIT(port) | BIT(cpu_port); - vl->untag |= BIT(port) | BIT(cpu_port); + vl->members |= BIT(port); b53_set_vlan_entry(dev, pvid, vl); } } @@ -2032,7 +2422,13 @@ int b53_br_flags_pre(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING)) + struct b53_device *dev = ds->priv; + unsigned long mask = (BR_FLOOD | BR_MCAST_FLOOD | BR_ISOLATED); + + if (!is5325(dev)) + mask |= BR_LEARNING; + + if (flags.mask & ~mask) return -EINVAL; return 0; @@ -2052,6 +2448,9 @@ int b53_br_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_LEARNING) b53_port_set_learning(ds->priv, port, !!(flags.val & BR_LEARNING)); + if (flags.mask & BR_ISOLATED) + b53_port_set_isolated(ds->priv, port, + !!(flags.val & BR_ISOLATED)); return 0; } @@ -2108,8 +2507,11 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, goto out; } - /* Older models require a different 6 byte tag */ - if (is5325(dev) || is5365(dev) || is63xx(dev)) { + /* Older models require different 6 byte tags */ + if (is5325(dev) || is5365(dev)) { + dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY_FCS; + goto out; + } else if (is63xx(dev)) { dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY; goto out; } @@ -2193,27 +2595,15 @@ void b53_mirror_del(struct dsa_switch *ds, int port, } EXPORT_SYMBOL(b53_mirror_del); -void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) -{ - struct b53_device *dev = ds->priv; - u16 reg; - - b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); - if (enable) - reg |= BIT(port); - else - reg &= ~BIT(port); - b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); -} -EXPORT_SYMBOL(b53_eee_enable_set); - - /* Returns 0 if EEE was not enabled, or 1 otherwise */ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) { int ret; + if (!b53_support_eee(ds, port)) + return 0; + ret = phy_init_eee(phy, false); if (ret) return 0; @@ -2224,30 +2614,18 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) } EXPORT_SYMBOL(b53_eee_init); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +bool b53_support_eee(struct dsa_switch *ds, int port) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; - u16 reg; - - if (is5325(dev) || is5365(dev)) - return -EOPNOTSUPP; - - b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®); - e->eee_enabled = p->eee_enabled; - e->eee_active = !!(reg & BIT(port)); - return 0; + return !is5325(dev) && !is5365(dev) && !is63xx(dev); } -EXPORT_SYMBOL(b53_get_mac_eee); +EXPORT_SYMBOL(b53_support_eee); -int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct b53_device *dev = ds->priv; - struct ethtool_eee *p = &dev->ports[port].eee; - - if (is5325(dev) || is5365(dev)) - return -EOPNOTSUPP; + struct ethtool_keee *p = &dev->ports[port].eee; p->eee_enabled = e->eee_enabled; b53_eee_enable_set(ds, port, e->eee_enabled); @@ -2263,19 +2641,59 @@ static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu) bool allow_10_100; if (is5325(dev) || is5365(dev)) - return -EOPNOTSUPP; + return 0; + + if (!dsa_is_cpu_port(ds, port)) + return 0; - enable_jumbo = (mtu >= JMS_MIN_SIZE); - allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID); + enable_jumbo = (mtu > ETH_DATA_LEN); + allow_10_100 = !is63xx(dev); return b53_set_jumbo(dev, enable_jumbo, allow_10_100); } static int b53_get_max_mtu(struct dsa_switch *ds, int port) { - return JMS_MAX_SIZE; + struct b53_device *dev = ds->priv; + + if (is5325(dev) || is5365(dev)) + return B53_MAX_MTU_25; + + return B53_MAX_MTU; } +int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct b53_device *dev = ds->priv; + u32 atc; + int reg; + + if (is63xx(dev)) + reg = B53_AGING_TIME_CONTROL_63XX; + else + reg = B53_AGING_TIME_CONTROL; + + if (dev->chip_id == BCM53101_DEVICE_ID) + atc = DIV_ROUND_CLOSEST(msecs, 500); + else + atc = DIV_ROUND_CLOSEST(msecs, 1000); + + if (!is5325(dev) && !is5365(dev)) + atc |= AGE_CHANGE; + + b53_write32(dev, B53_MGMT_PAGE, reg, atc); + + return 0; +} +EXPORT_SYMBOL_GPL(b53_set_ageing_time); + +static const struct phylink_mac_ops b53_phylink_mac_ops = { + .mac_select_pcs = b53_phylink_mac_select_pcs, + .mac_config = b53_phylink_mac_config, + .mac_link_down = b53_phylink_mac_link_down, + .mac_link_up = b53_phylink_mac_link_up, +}; + static const struct dsa_switch_ops b53_switch_ops = { .get_tag_protocol = b53_get_tag_protocol, .setup = b53_setup, @@ -2286,16 +2704,13 @@ static const struct dsa_switch_ops b53_switch_ops = { .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, .phy_read = b53_phy_read16, .phy_write = b53_phy_write16, - .adjust_link = b53_adjust_link, .phylink_get_caps = b53_phylink_get_caps, - .phylink_mac_select_pcs = b53_phylink_mac_select_pcs, - .phylink_mac_config = b53_phylink_mac_config, - .phylink_mac_link_down = b53_phylink_mac_link_down, - .phylink_mac_link_up = b53_phylink_mac_link_up, + .port_setup = b53_setup_port, .port_enable = b53_enable_port, .port_disable = b53_disable_port, - .get_mac_eee = b53_get_mac_eee, + .support_eee = b53_support_eee, .set_mac_eee = b53_set_mac_eee, + .set_ageing_time = b53_set_ageing_time, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_pre_bridge_flags = b53_br_flags_pre, @@ -2316,6 +2731,30 @@ static const struct dsa_switch_ops b53_switch_ops = { .port_change_mtu = b53_change_mtu, }; +static const struct b53_arl_ops b53_arl_ops_25 = { + .arl_read_entry = b53_arl_read_entry_25, + .arl_write_entry = b53_arl_write_entry_25, + .arl_search_read = b53_arl_search_read_25, +}; + +static const struct b53_arl_ops b53_arl_ops_89 = { + .arl_read_entry = b53_arl_read_entry_89, + .arl_write_entry = b53_arl_write_entry_89, + .arl_search_read = b53_arl_search_read_89, +}; + +static const struct b53_arl_ops b53_arl_ops_63xx = { + .arl_read_entry = b53_arl_read_entry_89, + .arl_write_entry = b53_arl_write_entry_89, + .arl_search_read = b53_arl_search_read_63xx, +}; + +static const struct b53_arl_ops b53_arl_ops_95 = { + .arl_read_entry = b53_arl_read_entry_95, + .arl_write_entry = b53_arl_write_entry_95, + .arl_search_read = b53_arl_search_read_95, +}; + struct b53_chip_data { u32 chip_id; const char *dev_name; @@ -2329,6 +2768,7 @@ struct b53_chip_data { u8 duplex_reg; u8 jumbo_pm_reg; u8 jumbo_size_reg; + const struct b53_arl_ops *arl_ops; }; #define B53_VTA_REGS \ @@ -2348,6 +2788,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .arl_buckets = 1024, .imp_port = 5, .duplex_reg = B53_DUPLEX_STAT_FE, + .arl_ops = &b53_arl_ops_25, }, { .chip_id = BCM5365_DEVICE_ID, @@ -2358,6 +2799,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .arl_buckets = 1024, .imp_port = 5, .duplex_reg = B53_DUPLEX_STAT_FE, + .arl_ops = &b53_arl_ops_25, }, { .chip_id = BCM5389_DEVICE_ID, @@ -2371,6 +2813,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, }, { .chip_id = BCM5395_DEVICE_ID, @@ -2384,6 +2827,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM5397_DEVICE_ID, @@ -2397,6 +2841,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, }, { .chip_id = BCM5398_DEVICE_ID, @@ -2410,6 +2855,21 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, + }, + { + .chip_id = BCM53101_DEVICE_ID, + .dev_name = "BCM53101", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 512, + .vta_regs = B53_VTA_REGS, + .imp_port = 8, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53115_DEVICE_ID, @@ -2423,6 +2883,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53125_DEVICE_ID, @@ -2436,6 +2897,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53128_DEVICE_ID, @@ -2449,32 +2911,21 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM63XX_DEVICE_ID, .dev_name = "BCM63xx", .vlans = 4096, .enabled_ports = 0, /* pdata must provide them */ - .arl_bins = 4, - .arl_buckets = 1024, - .imp_port = 8, - .vta_regs = B53_VTA_REGS_63XX, - .duplex_reg = B53_DUPLEX_STAT_63XX, - .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, - .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, - }, - { - .chip_id = BCM63268_DEVICE_ID, - .dev_name = "BCM63268", - .vlans = 4096, - .enabled_ports = 0, /* pdata must provide them */ - .arl_bins = 4, - .arl_buckets = 1024, + .arl_bins = 1, + .arl_buckets = 4096, .imp_port = 8, .vta_regs = B53_VTA_REGS_63XX, .duplex_reg = B53_DUPLEX_STAT_63XX, .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + .arl_ops = &b53_arl_ops_63xx, }, { .chip_id = BCM53010_DEVICE_ID, @@ -2488,6 +2939,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53011_DEVICE_ID, @@ -2501,6 +2953,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53012_DEVICE_ID, @@ -2514,6 +2967,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53018_DEVICE_ID, @@ -2527,6 +2981,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53019_DEVICE_ID, @@ -2540,6 +2995,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM58XX_DEVICE_ID, @@ -2553,6 +3009,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM583XX_DEVICE_ID, @@ -2566,6 +3023,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, /* Starfighter 2 */ { @@ -2580,6 +3038,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM7445_DEVICE_ID, @@ -2593,6 +3052,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM7278_DEVICE_ID, @@ -2606,6 +3066,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53134_DEVICE_ID, @@ -2620,18 +3081,23 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, }; static int b53_switch_init(struct b53_device *dev) { + u32 chip_id = dev->chip_id; unsigned int i; int ret; + if (is63xx(dev)) + chip_id = BCM63XX_DEVICE_ID; + for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { const struct b53_chip_data *chip = &b53_switch_chips[i]; - if (chip->chip_id == dev->chip_id) { + if (chip->chip_id == chip_id) { if (!dev->enabled_ports) dev->enabled_ports = chip->enabled_ports; dev->name = chip->dev_name; @@ -2644,6 +3110,7 @@ static int b53_switch_init(struct b53_device *dev) dev->num_vlans = chip->vlans; dev->num_arl_bins = chip->arl_bins; dev->num_arl_buckets = chip->arl_buckets; + dev->arl_ops = chip->arl_ops; break; } } @@ -2674,6 +3141,9 @@ static int b53_switch_init(struct b53_device *dev) } } + if (is5325e(dev)) + dev->num_arl_buckets = 512; + dev->num_ports = fls(dev->enabled_ports); dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS); @@ -2734,7 +3204,9 @@ struct b53_device *b53_switch_alloc(struct device *base, dev->priv = priv; dev->ops = ops; ds->ops = &b53_switch_ops; + ds->phylink_mac_ops = &b53_phylink_mac_ops; dev->vlan_enabled = true; + dev->vlan_filtering = false; /* Let DSA handle the case were multiple bridges span the same switch * device and different VLAN awareness settings are requested, which * would be breaking filtering semantics for any of the other bridge @@ -2773,10 +3245,24 @@ int b53_switch_detect(struct b53_device *dev) b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); - if (tmp == 0xf) + if (tmp == 0xf) { + u32 phy_id; + int val; + dev->chip_id = BCM5325_DEVICE_ID; - else + + val = b53_phy_read16(dev->ds, 0, MII_PHYSID1); + phy_id = (val & 0xffff) << 16; + val = b53_phy_read16(dev->ds, 0, MII_PHYSID2); + phy_id |= (val & 0xfff0); + + if (phy_id == 0x00406330) + dev->variant_id = B53_VARIANT_5325M; + else if (phy_id == 0x0143bc30) + dev->variant_id = B53_VARIANT_5325E; + } else { dev->chip_id = BCM5365_DEVICE_ID; + } break; case BCM5389_DEVICE_ID: case BCM5395_DEVICE_ID: @@ -2790,6 +3276,7 @@ int b53_switch_detect(struct b53_device *dev) return ret; switch (id32) { + case BCM53101_DEVICE_ID: case BCM53115_DEVICE_ID: case BCM53125_DEVICE_ID: case BCM53128_DEVICE_ID: diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c index 4d55d8d18376..43a3b37b731b 100644 --- a/drivers/net/dsa/b53/b53_mdio.c +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -329,7 +329,7 @@ static int b53_mdio_probe(struct mdio_device *mdiodev) * layer setup */ if (of_machine_is_compatible("brcm,bcm7445d0") && - strcmp(mdiodev->bus->name, "sf2 slave mii")) + strcmp(mdiodev->bus->name, "sf2 user mii")) return -EPROBE_DEFER; dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus); @@ -343,10 +343,9 @@ static int b53_mdio_probe(struct mdio_device *mdiodev) dev_set_drvdata(&mdiodev->dev, dev); ret = b53_switch_register(dev); - if (ret) { - dev_err(&mdiodev->dev, "failed to register switch: %i\n", ret); - return ret; - } + if (ret) + return dev_err_probe(&mdiodev->dev, ret, + "failed to register switch\n"); return ret; } @@ -375,6 +374,7 @@ static void b53_mdio_shutdown(struct mdio_device *mdiodev) static const struct of_device_id b53_of_match[] = { { .compatible = "brcm,bcm5325" }, + { .compatible = "brcm,bcm53101" }, { .compatible = "brcm,bcm53115" }, { .compatible = "brcm,bcm53125" }, { .compatible = "brcm,bcm53128" }, diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c index 5e39641ea887..f4a59d8fbdd6 100644 --- a/drivers/net/dsa/b53/b53_mmap.c +++ b/drivers/net/dsa/b53/b53_mmap.c @@ -21,13 +21,60 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <linux/platform_data/b53.h> +#include <linux/regmap.h> #include "b53_priv.h" +#define BCM63XX_EPHY_REG 0x3C +#define BCM63268_GPHY_REG 0x54 + +#define GPHY_CTRL_LOW_PWR BIT(3) +#define GPHY_CTRL_IDDQ_BIAS BIT(0) + +struct b53_phy_info { + u32 gphy_port_mask; + u32 ephy_enable_mask; + u32 ephy_port_mask; + u32 ephy_bias_bit; + const u32 *ephy_offset; +}; + struct b53_mmap_priv { void __iomem *regs; + struct regmap *gpio_ctrl; + const struct b53_phy_info *phy_info; + u32 phys_enabled; +}; + +static const u32 bcm6318_ephy_offsets[] = {4, 5, 6, 7}; + +static const struct b53_phy_info bcm6318_ephy_info = { + .ephy_enable_mask = BIT(0) | BIT(4) | BIT(8) | BIT(12) | BIT(16), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6318_ephy_offsets) - 1), 0), + .ephy_bias_bit = 24, + .ephy_offset = bcm6318_ephy_offsets, +}; + +static const u32 bcm6368_ephy_offsets[] = {2, 3, 4, 5}; + +static const struct b53_phy_info bcm6368_ephy_info = { + .ephy_enable_mask = BIT(0), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6368_ephy_offsets) - 1), 0), + .ephy_bias_bit = 0, + .ephy_offset = bcm6368_ephy_offsets, +}; + +static const u32 bcm63268_ephy_offsets[] = {4, 9, 14}; + +static const struct b53_phy_info bcm63268_ephy_info = { + .gphy_port_mask = BIT(3), + .ephy_enable_mask = GENMASK(4, 0), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm63268_ephy_offsets) - 1), 0), + .ephy_bias_bit = 24, + .ephy_offset = bcm63268_ephy_offsets, }; static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) @@ -229,6 +276,71 @@ static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg, return -EIO; } +static int bcm63xx_ephy_set(struct b53_device *dev, int port, bool enable) +{ + struct b53_mmap_priv *priv = dev->priv; + const struct b53_phy_info *info = priv->phy_info; + struct regmap *gpio_ctrl = priv->gpio_ctrl; + u32 mask, val; + + if (enable) { + mask = (info->ephy_enable_mask << info->ephy_offset[port]) + | BIT(info->ephy_bias_bit); + val = 0; + } else { + mask = (info->ephy_enable_mask << info->ephy_offset[port]); + if (!((priv->phys_enabled & ~BIT(port)) & info->ephy_port_mask)) + mask |= BIT(info->ephy_bias_bit); + val = mask; + } + return regmap_update_bits(gpio_ctrl, BCM63XX_EPHY_REG, mask, val); +} + +static int bcm63268_gphy_set(struct b53_device *dev, bool enable) +{ + struct b53_mmap_priv *priv = dev->priv; + struct regmap *gpio_ctrl = priv->gpio_ctrl; + u32 mask = GPHY_CTRL_IDDQ_BIAS | GPHY_CTRL_LOW_PWR; + u32 val = 0; + + if (!enable) + val = mask; + + return regmap_update_bits(gpio_ctrl, BCM63268_GPHY_REG, mask, val); +} + +static void b53_mmap_phy_enable(struct b53_device *dev, int port) +{ + struct b53_mmap_priv *priv = dev->priv; + int ret = 0; + + if (priv->phy_info) { + if (BIT(port) & priv->phy_info->ephy_port_mask) + ret = bcm63xx_ephy_set(dev, port, true); + else if (BIT(port) & priv->phy_info->gphy_port_mask) + ret = bcm63268_gphy_set(dev, true); + } + + if (!ret) + priv->phys_enabled |= BIT(port); +} + +static void b53_mmap_phy_disable(struct b53_device *dev, int port) +{ + struct b53_mmap_priv *priv = dev->priv; + int ret = 0; + + if (priv->phy_info) { + if (BIT(port) & priv->phy_info->ephy_port_mask) + ret = bcm63xx_ephy_set(dev, port, false); + else if (BIT(port) & priv->phy_info->gphy_port_mask) + ret = bcm63268_gphy_set(dev, false); + } + + if (!ret) + priv->phys_enabled &= ~BIT(port); +} + static const struct b53_io_ops b53_mmap_ops = { .read8 = b53_mmap_read8, .read16 = b53_mmap_read16, @@ -242,6 +354,8 @@ static const struct b53_io_ops b53_mmap_ops = { .write64 = b53_mmap_write64, .phy_read16 = b53_mmap_phy_read16, .phy_write16 = b53_mmap_phy_write16, + .phy_enable = b53_mmap_phy_enable, + .phy_disable = b53_mmap_phy_disable, }; static int b53_mmap_probe_of(struct platform_device *pdev, @@ -313,6 +427,18 @@ static int b53_mmap_probe(struct platform_device *pdev) priv->regs = pdata->regs; + priv->gpio_ctrl = syscon_regmap_lookup_by_phandle(np, "brcm,gpio-ctrl"); + if (!IS_ERR(priv->gpio_ctrl)) { + if (pdata->chip_id == BCM6318_DEVICE_ID || + pdata->chip_id == BCM6328_DEVICE_ID || + pdata->chip_id == BCM6362_DEVICE_ID) + priv->phy_info = &bcm6318_ephy_info; + else if (pdata->chip_id == BCM6368_DEVICE_ID) + priv->phy_info = &bcm6368_ephy_info; + else if (pdata->chip_id == BCM63268_DEVICE_ID) + priv->phy_info = &bcm63268_ephy_info; + } + dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, priv); if (!dev) return -ENOMEM; @@ -324,14 +450,12 @@ static int b53_mmap_probe(struct platform_device *pdev) return b53_switch_register(dev); } -static int b53_mmap_remove(struct platform_device *pdev) +static void b53_mmap_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); if (dev) b53_switch_remove(dev); - - return 0; } static void b53_mmap_shutdown(struct platform_device *pdev) @@ -350,16 +474,16 @@ static const struct of_device_id b53_mmap_of_table[] = { .data = (void *)BCM63XX_DEVICE_ID, }, { .compatible = "brcm,bcm6318-switch", - .data = (void *)BCM63268_DEVICE_ID, + .data = (void *)BCM6318_DEVICE_ID, }, { .compatible = "brcm,bcm6328-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6328_DEVICE_ID, }, { .compatible = "brcm,bcm6362-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6362_DEVICE_ID, }, { .compatible = "brcm,bcm6368-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6368_DEVICE_ID, }, { .compatible = "brcm,bcm63268-switch", .data = (void *)BCM63268_DEVICE_ID, diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h index fdcfd5081c28..bd6849e5bb93 100644 --- a/drivers/net/dsa/b53/b53_priv.h +++ b/drivers/net/dsa/b53/b53_priv.h @@ -45,6 +45,8 @@ struct b53_io_ops { int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value); int (*irq_enable)(struct b53_device *dev, int port); void (*irq_disable)(struct b53_device *dev, int port); + void (*phy_enable)(struct b53_device *dev, int port); + void (*phy_disable)(struct b53_device *dev, int port); void (*phylink_get_caps)(struct b53_device *dev, int port, struct phylink_config *config); struct phylink_pcs *(*phylink_mac_select_pcs)(struct b53_device *dev, @@ -56,6 +58,17 @@ struct b53_io_ops { bool link_up); }; +struct b53_arl_entry; + +struct b53_arl_ops { + void (*arl_read_entry)(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx); + void (*arl_write_entry)(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx); + void (*arl_search_read)(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent); +}; + #define B53_INVALID_LANE 0xff enum { @@ -66,10 +79,15 @@ enum { BCM5395_DEVICE_ID = 0x95, BCM5397_DEVICE_ID = 0x97, BCM5398_DEVICE_ID = 0x98, + BCM53101_DEVICE_ID = 0x53101, BCM53115_DEVICE_ID = 0x53115, BCM53125_DEVICE_ID = 0x53125, BCM53128_DEVICE_ID = 0x53128, BCM63XX_DEVICE_ID = 0x6300, + BCM6318_DEVICE_ID = 0x6318, + BCM6328_DEVICE_ID = 0x6328, + BCM6362_DEVICE_ID = 0x6362, + BCM6368_DEVICE_ID = 0x6368, BCM63268_DEVICE_ID = 0x63268, BCM53010_DEVICE_ID = 0x53010, BCM53011_DEVICE_ID = 0x53011, @@ -83,6 +101,12 @@ enum { BCM53134_DEVICE_ID = 0x5075, }; +enum b53_variant_id { + B53_VARIANT_NONE = 0, + B53_VARIANT_5325E, + B53_VARIANT_5325M, +}; + struct b53_pcs { struct phylink_pcs pcs; struct b53_device *dev; @@ -95,7 +119,8 @@ struct b53_pcs { struct b53_port { u16 vlan_ctl_mask; - struct ethtool_eee eee; + u16 pvid; + struct ethtool_keee eee; }; struct b53_vlan { @@ -113,9 +138,11 @@ struct b53_device { struct mutex stats_mutex; struct mutex arl_mutex; const struct b53_io_ops *ops; + const struct b53_arl_ops *arl_ops; /* chip specific data */ u32 chip_id; + enum b53_variant_id variant_id; u8 core_rev; u8 vta_regs[3]; u8 duplex_reg; @@ -146,6 +173,7 @@ struct b53_device { unsigned int num_vlans; struct b53_vlan *vlans; bool vlan_enabled; + bool vlan_filtering; unsigned int num_ports; struct b53_port *ports; @@ -162,6 +190,18 @@ static inline int is5325(struct b53_device *dev) return dev->chip_id == BCM5325_DEVICE_ID; } +static inline int is5325e(struct b53_device *dev) +{ + return is5325(dev) && + dev->variant_id == B53_VARIANT_5325E; +} + +static inline int is5325m(struct b53_device *dev) +{ + return is5325(dev) && + dev->variant_id == B53_VARIANT_5325M; +} + static inline int is5365(struct b53_device *dev) { #ifdef CONFIG_BCM47XX @@ -188,6 +228,7 @@ static inline int is531x5(struct b53_device *dev) { return dev->chip_id == BCM53115_DEVICE_ID || dev->chip_id == BCM53125_DEVICE_ID || + dev->chip_id == BCM53101_DEVICE_ID || dev->chip_id == BCM53128_DEVICE_ID || dev->chip_id == BCM53134_DEVICE_ID; } @@ -195,12 +236,17 @@ static inline int is531x5(struct b53_device *dev) static inline int is63xx(struct b53_device *dev) { return dev->chip_id == BCM63XX_DEVICE_ID || + dev->chip_id == BCM6318_DEVICE_ID || + dev->chip_id == BCM6328_DEVICE_ID || + dev->chip_id == BCM6362_DEVICE_ID || + dev->chip_id == BCM6368_DEVICE_ID || dev->chip_id == BCM63268_DEVICE_ID; } -static inline int is63268(struct b53_device *dev) +static inline int is6318_268(struct b53_device *dev) { - return dev->chip_id == BCM63268_DEVICE_ID; + return dev->chip_id == BCM6318_DEVICE_ID || + dev->chip_id == BCM63268_DEVICE_ID; } static inline int is5301x(struct b53_device *dev) @@ -294,6 +340,33 @@ static inline void b53_arl_to_entry(struct b53_arl_entry *ent, ent->vid = mac_vid >> ARLTBL_VID_S; } +static inline void b53_arl_to_entry_25(struct b53_arl_entry *ent, + u64 mac_vid, u8 vid_entry) +{ + memset(ent, 0, sizeof(*ent)); + ent->is_valid = !!(mac_vid & ARLTBL_VALID_25); + ent->is_age = !!(mac_vid & ARLTBL_AGE_25); + ent->is_static = !!(mac_vid & ARLTBL_STATIC_25); + u64_to_ether_addr(mac_vid, ent->mac); + ent->port = (mac_vid & ARLTBL_DATA_PORT_ID_MASK_25) >> + ARLTBL_DATA_PORT_ID_S_25; + if (is_unicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT) + ent->port = B53_CPU_PORT_25; + ent->vid = vid_entry; +} + +static inline void b53_arl_to_entry_89(struct b53_arl_entry *ent, + u64 mac_vid, u16 fwd_entry) +{ + memset(ent, 0, sizeof(*ent)); + ent->port = fwd_entry & ARLTBL_DATA_PORT_ID_MASK_89; + ent->is_valid = !!(fwd_entry & ARLTBL_VALID_89); + ent->is_age = !!(fwd_entry & ARLTBL_AGE_89); + ent->is_static = !!(fwd_entry & ARLTBL_STATIC_89); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = mac_vid >> ARLTBL_VID_S; +} + static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry, const struct b53_arl_entry *ent) { @@ -308,6 +381,89 @@ static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry, *fwd_entry |= ARLTBL_AGE; } +static inline void b53_arl_from_entry_25(u64 *mac_vid, u8 *vid_entry, + const struct b53_arl_entry *ent) +{ + *mac_vid = ether_addr_to_u64(ent->mac); + if (is_unicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT_25) + *mac_vid |= (u64)B53_CPU_PORT << ARLTBL_DATA_PORT_ID_S_25; + else + *mac_vid |= ((u64)ent->port << ARLTBL_DATA_PORT_ID_S_25) & + ARLTBL_DATA_PORT_ID_MASK_25; + if (ent->is_valid) + *mac_vid |= ARLTBL_VALID_25; + if (ent->is_static) + *mac_vid |= ARLTBL_STATIC_25; + if (ent->is_age) + *mac_vid |= ARLTBL_AGE_25; + *vid_entry = ent->vid; +} + +static inline void b53_arl_from_entry_89(u64 *mac_vid, u32 *fwd_entry, + const struct b53_arl_entry *ent) +{ + *mac_vid = ether_addr_to_u64(ent->mac); + *mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK) << ARLTBL_VID_S; + *fwd_entry = ent->port & ARLTBL_DATA_PORT_ID_MASK_89; + if (ent->is_valid) + *fwd_entry |= ARLTBL_VALID_89; + if (ent->is_static) + *fwd_entry |= ARLTBL_STATIC_89; + if (ent->is_age) + *fwd_entry |= ARLTBL_AGE_89; +} + +static inline void b53_arl_search_to_entry_25(struct b53_arl_entry *ent, + u64 mac_vid, u8 ext) +{ + memset(ent, 0, sizeof(*ent)); + ent->is_valid = !!(mac_vid & ARLTBL_VALID_25); + ent->is_age = !!(mac_vid & ARLTBL_AGE_25); + ent->is_static = !!(mac_vid & ARLTBL_STATIC_25); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = (mac_vid & ARL_SRCH_RSLT_VID_MASK_25) >> + ARL_SRCH_RSLT_VID_S_25; + ent->port = (mac_vid & ARL_SRCH_RSLT_PORT_ID_MASK_25) >> + ARL_SRCH_RSLT_PORT_ID_S_25; + if (is_multicast_ether_addr(ent->mac) && (ext & ARL_SRCH_RSLT_EXT_MC_MII)) + ent->port |= BIT(B53_CPU_PORT_25); + else if (!is_multicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT) + ent->port = B53_CPU_PORT_25; +} + +static inline void b53_arl_search_to_entry_63xx(struct b53_arl_entry *ent, + u64 mac_vid, u16 fwd_entry) +{ + memset(ent, 0, sizeof(*ent)); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = mac_vid >> ARLTBL_VID_S; + + ent->port = fwd_entry & ARL_SRST_PORT_ID_MASK_63XX; + ent->port >>= 1; + + ent->is_age = !!(fwd_entry & ARL_SRST_AGE_63XX); + ent->is_static = !!(fwd_entry & ARL_SRST_STATIC_63XX); + ent->is_valid = 1; +} + +static inline void b53_arl_read_entry(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + dev->arl_ops->arl_read_entry(dev, ent, idx); +} + +static inline void b53_arl_write_entry(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + dev->arl_ops->arl_write_entry(dev, ent, idx); +} + +static inline void b53_arl_search_read(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + dev->arl_ops->arl_search_read(dev, idx, ent); +} + #ifdef CONFIG_BCM47XX #include <linux/bcm47xx_nvram.h> @@ -339,6 +495,7 @@ void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); int b53_get_sset_count(struct dsa_switch *ds, int port, int sset); void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data); +int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs); int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, struct netlink_ext_ack *extack); void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge); @@ -352,18 +509,6 @@ int b53_br_flags(struct dsa_switch *ds, int port, struct netlink_ext_ack *extack); int b53_setup_devlink_resources(struct dsa_switch *ds); void b53_port_event(struct dsa_switch *ds, int port); -void b53_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state); -void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface); -void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, - int speed, int duplex, - bool tx_pause, bool rx_pause); int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, struct netlink_ext_ack *extack); int b53_vlan_add(struct dsa_switch *ds, int port, @@ -392,12 +537,12 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mprot); void b53_mirror_del(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror); +int b53_setup_port(struct dsa_switch *ds, int port); int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy); void b53_disable_port(struct dsa_switch *ds, int port); void b53_brcm_hdr_setup(struct dsa_switch *ds, int port); -void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable); int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); -int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); +bool b53_support_eee(struct dsa_switch *ds, int port); +int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); #endif diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index bfbcb66bef66..54a278db67c9 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -29,6 +29,7 @@ #define B53_ARLIO_PAGE 0x05 /* ARL Access */ #define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */ #define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */ +#define B53_IEEE_PAGE 0x0a /* IEEE 802.1X */ /* PHY Registers */ #define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */ @@ -50,6 +51,9 @@ /* Jumbo Frame Registers */ #define B53_JUMBO_PAGE 0x40 +/* EAP Registers */ +#define B53_EAP_PAGE 0x42 + /* EEE Control Registers Page */ #define B53_EEE_PAGE 0x92 @@ -92,18 +96,22 @@ #define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_LP_FLOW_25 BIT(3) /* BCM5325 only */ #define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */ #define PORT_OVERRIDE_RX_FLOW BIT(4) #define PORT_OVERRIDE_TX_FLOW BIT(5) #define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */ #define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */ -/* Power-down mode control */ +/* Power-down mode control (8 bit) */ #define B53_PD_MODE_CTRL_25 0x0f +#define PD_MODE_PORT_MASK 0x1f +/* Bit 0 also powers down the switch. */ +#define PD_MODE_POWER_DOWN_PORT(i) BIT(i) /* IP Multicast control (8 bit) */ #define B53_IP_MULTICAST_CTRL 0x21 -#define B53_IPMC_FWD_EN BIT(1) +#define B53_IP_MC BIT(0) #define B53_UC_FWD_EN BIT(6) #define B53_MC_FWD_EN BIT(7) @@ -111,6 +119,10 @@ #define B53_SWITCH_CTRL 0x22 #define B53_MII_DUMB_FWDG_EN BIT(6) +/* Protected Port Selection (16 bit) */ +#define B53_PROTECTED_PORT_SEL 0x24 +#define B53_PROTECTED_PORT_SEL_25 0x26 + /* (16 bit) */ #define B53_UC_FLOOD_MASK 0x32 #define B53_MC_FLOOD_MASK 0x34 @@ -217,6 +229,13 @@ #define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */ #define BRCM_HDR_P7_EN BIT(2) /* Enable tagging on port 7 */ +/* Aging Time control register (32 bit) */ +#define B53_AGING_TIME_CONTROL 0x06 +#define B53_AGING_TIME_CONTROL_63XX 0x08 +#define AGE_CHANGE BIT(20) +#define AGE_TIME_MASK 0x7ffff +#define AGE_TIME_MAX 1048575 + /* Mirror capture control register (16 bit) */ #define B53_MIR_CAP_CTL 0x10 #define CAP_PORT_MASK 0xf @@ -310,13 +329,12 @@ #define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10) #define ARLTBL_MAC_MASK 0xffffffffffffULL #define ARLTBL_VID_S 48 -#define ARLTBL_VID_MASK_25 0xff #define ARLTBL_VID_MASK 0xfff #define ARLTBL_DATA_PORT_ID_S_25 48 -#define ARLTBL_DATA_PORT_ID_MASK_25 0xf -#define ARLTBL_AGE_25 BIT(61) -#define ARLTBL_STATIC_25 BIT(62) -#define ARLTBL_VALID_25 BIT(63) +#define ARLTBL_DATA_PORT_ID_MASK_25 GENMASK_ULL(53, 48) +#define ARLTBL_AGE_25 BIT_ULL(61) +#define ARLTBL_STATIC_25 BIT_ULL(62) +#define ARLTBL_VALID_25 BIT_ULL(63) /* ARL Table Data Entry N Registers (32 bit) */ #define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18) @@ -326,12 +344,23 @@ #define ARLTBL_STATIC BIT(15) #define ARLTBL_VALID BIT(16) +/* BCM5389 ARL Table Data Entry N Register format (16 bit) */ +#define ARLTBL_DATA_PORT_ID_MASK_89 GENMASK(8, 0) +#define ARLTBL_TC_MASK_89 GENMASK(12, 10) +#define ARLTBL_AGE_89 BIT(13) +#define ARLTBL_STATIC_89 BIT(14) +#define ARLTBL_VALID_89 BIT(15) + +/* BCM5325/BCM565 ARL Table VID Entry N Registers (8 bit) */ +#define B53_ARLTBL_VID_ENTRY_25(n) ((0x2 * (n)) + 0x30) + /* Maximum number of bin entries in the ARL for all switches */ #define B53_ARLTBL_MAX_BIN_ENTRIES 4 /* ARL Search Control Register (8 bit) */ #define B53_ARL_SRCH_CTL 0x50 #define B53_ARL_SRCH_CTL_25 0x20 +#define B53_ARL_SRCH_CTL_89 0x30 #define ARL_SRCH_VLID BIT(0) #define ARL_SRCH_STDN BIT(7) @@ -339,22 +368,54 @@ #define B53_ARL_SRCH_ADDR 0x51 #define B53_ARL_SRCH_ADDR_25 0x22 #define B53_ARL_SRCH_ADDR_65 0x24 +#define B53_ARL_SRCH_ADDR_89 0x31 +#define B53_ARL_SRCH_ADDR_63XX 0x32 #define ARL_ADDR_MASK GENMASK(14, 0) /* ARL Search MAC/VID Result (64 bit) */ #define B53_ARL_SRCH_RSTL_0_MACVID 0x60 +#define B53_ARL_SRCH_RSLT_MACVID_89 0x33 +#define B53_ARL_SRCH_RSLT_MACVID_63XX 0x34 -/* Single register search result on 5325 */ +/* Single register search result on 5325/5365 */ #define B53_ARL_SRCH_RSTL_0_MACVID_25 0x24 -/* Single register search result on 5365 */ -#define B53_ARL_SRCH_RSTL_0_MACVID_65 0x30 +#define ARL_SRCH_RSLT_PORT_ID_S_25 48 +#define ARL_SRCH_RSLT_PORT_ID_MASK_25 GENMASK_ULL(52, 48) +#define ARL_SRCH_RSLT_VID_S_25 53 +#define ARL_SRCH_RSLT_VID_MASK_25 GENMASK_ULL(60, 53) + +/* BCM5325/5365 Search result extend register (8 bit) */ +#define B53_ARL_SRCH_RSLT_EXT_25 0x2c +#define ARL_SRCH_RSLT_EXT_MC_MII BIT(2) /* ARL Search Data Result (32 bit) */ #define B53_ARL_SRCH_RSTL_0 0x68 +/* BCM5389 ARL Search Data Result (16 bit) */ +#define B53_ARL_SRCH_RSLT_89 0x3b + #define B53_ARL_SRCH_RSTL_MACVID(x) (B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10)) #define B53_ARL_SRCH_RSTL(x) (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10)) +/* 63XX ARL Search Data Result (16 bit) */ +#define B53_ARL_SRCH_RSLT_63XX 0x3c +#define ARL_SRST_PORT_ID_MASK_63XX GENMASK(9, 1) +#define ARL_SRST_TC_MASK_63XX GENMASK(13, 11) +#define ARL_SRST_AGE_63XX BIT(14) +#define ARL_SRST_STATIC_63XX BIT(15) + +/************************************************************************* + * IEEE 802.1X Registers + *************************************************************************/ + +/* Multicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_MCAST_DLF 0x94 +#define B53_IEEE_MCAST_DROP_EN BIT(11) + +/* Unicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_UCAST_DLF 0x96 +#define B53_IEEE_UCAST_DROP_EN BIT(11) + /************************************************************************* * Port VLAN Registers *************************************************************************/ @@ -481,6 +542,17 @@ #define JMS_MAX_SIZE 9724 /************************************************************************* + * EAP Page Registers + *************************************************************************/ +#define B53_PORT_EAP_CONF(i) (0x20 + 8 * (i)) +#define EAP_MODE_SHIFT 51 +#define EAP_MODE_SHIFT_63XX 50 +#define EAP_MODE_MASK (0x3ull << EAP_MODE_SHIFT) +#define EAP_MODE_MASK_63XX (0x3ull << EAP_MODE_SHIFT_63XX) +#define EAP_MODE_BASIC 0 +#define EAP_MODE_SIMPLIFIED 3 + +/************************************************************************* * EEE Configuration Page Registers *************************************************************************/ diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c index 3f8a491ce885..7460122f6abc 100644 --- a/drivers/net/dsa/b53/b53_serdes.c +++ b/drivers/net/dsa/b53/b53_serdes.c @@ -99,8 +99,8 @@ static void b53_serdes_an_restart(struct phylink_pcs *pcs) SERDES_MII_BLK, reg); } -static void b53_serdes_get_state(struct phylink_pcs *pcs, - struct phylink_link_state *state) +static void b53_serdes_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, + struct phylink_link_state *state) { struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; u8 lane = pcs_to_b53_pcs(pcs)->lane; @@ -239,7 +239,6 @@ int b53_serdes_init(struct b53_device *dev, int port) pcs->dev = dev; pcs->lane = lane; pcs->pcs.ops = &b53_pcs_ops; - pcs->pcs.neg_mode = true; return 0; } diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c index 308f15d3832e..467da057579e 100644 --- a/drivers/net/dsa/b53/b53_spi.c +++ b/drivers/net/dsa/b53/b53_spi.c @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <linux/delay.h> #include <linux/kernel.h> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c index bcb44034404d..b9939bbd2cd5 100644 --- a/drivers/net/dsa/b53/b53_srab.c +++ b/drivers/net/dsa/b53/b53_srab.c @@ -657,17 +657,15 @@ static int b53_srab_probe(struct platform_device *pdev) return b53_switch_register(dev); } -static int b53_srab_remove(struct platform_device *pdev) +static void b53_srab_remove(struct platform_device *pdev) { struct b53_device *dev = platform_get_drvdata(pdev); if (!dev) - return 0; + return; b53_srab_intr_set(dev->priv, false); b53_switch_remove(dev); - - return 0; } static void b53_srab_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 72374b066f64..960685596093 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -513,12 +513,12 @@ static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv) u32 reg; int i; - mask = BIT(priv->num_crossbar_int_ports) - 1; + mask = BIT(priv->num_crossbar_ext_bits) - 1; reg = reg_readl(priv, REG_CROSSBAR); switch (priv->type) { case BCM4908_DEVICE_ID: - shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_int_ports; + shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_ext_bits; reg &= ~(mask << shift); if (0) /* FIXME */ reg |= CROSSBAR_BCM4908_EXT_SERDES << shift; @@ -536,7 +536,7 @@ static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv) reg = reg_readl(priv, REG_CROSSBAR); for (i = 0; i < priv->num_crossbar_int_ports; i++) { - shift = i * priv->num_crossbar_int_ports; + shift = i * priv->num_crossbar_ext_bits; dev_dbg(dev, "crossbar int port #%d - ext port #%d\n", i, (reg >> shift) & mask); @@ -617,26 +617,22 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds) dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio"); priv->master_mii_bus = of_mdio_find_bus(dn); if (!priv->master_mii_bus) { - of_node_put(dn); - return -EPROBE_DEFER; + err = -EPROBE_DEFER; + goto err_of_node_put; } - get_device(&priv->master_mii_bus->dev); - priv->master_mii_dn = dn; - - priv->slave_mii_bus = mdiobus_alloc(); - if (!priv->slave_mii_bus) { - of_node_put(dn); - return -ENOMEM; + priv->user_mii_bus = mdiobus_alloc(); + if (!priv->user_mii_bus) { + err = -ENOMEM; + goto err_put_master_mii_bus_dev; } - priv->slave_mii_bus->priv = priv; - priv->slave_mii_bus->name = "sf2 slave mii"; - priv->slave_mii_bus->read = bcm_sf2_sw_mdio_read; - priv->slave_mii_bus->write = bcm_sf2_sw_mdio_write; - snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d", + priv->user_mii_bus->priv = priv; + priv->user_mii_bus->name = "sf2 user mii"; + priv->user_mii_bus->read = bcm_sf2_sw_mdio_read; + priv->user_mii_bus->write = bcm_sf2_sw_mdio_write; + snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d", index++); - priv->slave_mii_bus->dev.of_node = dn; /* Include the pseudo-PHY address to divert reads towards our * workaround. This is only required for 7445D0, since 7445E0 @@ -654,9 +650,9 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds) priv->indir_phy_mask = 0; ds->phys_mii_mask = priv->indir_phy_mask; - ds->slave_mii_bus = priv->slave_mii_bus; - priv->slave_mii_bus->parent = ds->dev->parent; - priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask; + ds->user_mii_bus = priv->user_mii_bus; + priv->user_mii_bus->parent = ds->dev->parent; + priv->user_mii_bus->phy_mask = ~priv->indir_phy_mask; /* We need to make sure that of_phy_connect() will not work by * removing the 'phandle' and 'linux,phandle' properties and @@ -679,24 +675,34 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds) of_remove_property(child, prop); phydev = of_phy_find_device(child); - if (phydev) + if (phydev) { phy_device_remove(phydev); + phy_device_free(phydev); + } } - err = mdiobus_register(priv->slave_mii_bus); - if (err && dn) { - mdiobus_free(priv->slave_mii_bus); - of_node_put(dn); - } + err = mdiobus_register(priv->user_mii_bus); + if (err) + goto err_free_user_mii_bus; + + of_node_put(dn); + + return 0; +err_free_user_mii_bus: + mdiobus_free(priv->user_mii_bus); +err_put_master_mii_bus_dev: + put_device(&priv->master_mii_bus->dev); +err_of_node_put: + of_node_put(dn); return err; } static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv) { - mdiobus_unregister(priv->slave_mii_bus); - mdiobus_free(priv->slave_mii_bus); - of_node_put(priv->master_mii_dn); + mdiobus_unregister(priv->user_mii_bus); + mdiobus_free(priv->user_mii_bus); + put_device(&priv->master_mii_bus->dev); } static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port) @@ -736,16 +742,19 @@ static void bcm_sf2_sw_get_caps(struct dsa_switch *ds, int port, MAC_10 | MAC_100 | MAC_1000; } -static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port, +static void bcm_sf2_sw_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + struct dsa_port *dp = dsa_phylink_to_port(config); u32 id_mode_dis = 0, port_mode; + struct bcm_sf2_priv *priv; u32 reg_rgmii_ctrl; u32 reg; - if (port == core_readl(priv, CORE_IMP0_PRT_ID)) + priv = bcm_sf2_to_priv(dp->ds); + + if (dp->index == core_readl(priv, CORE_IMP0_PRT_ID)) return; switch (state->interface) { @@ -766,7 +775,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port, return; } - reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port); + reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, dp->index); /* Clear id_mode_dis bit, and the existing port mode, let * RGMII_MODE_EN bet set by mac_link_{up,down} @@ -805,13 +814,16 @@ static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port, reg_writel(priv, reg, reg_rgmii_ctrl); } -static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port, +static void bcm_sf2_sw_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + struct dsa_port *dp = dsa_phylink_to_port(config); + struct bcm_sf2_priv *priv; + int port = dp->index; u32 reg, offset; + priv = bcm_sf2_to_priv(dp->ds); if (priv->wol_ports_mask & BIT(port)) return; @@ -820,23 +832,26 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port, reg &= ~LINK_STS; core_writel(priv, reg, offset); - bcm_sf2_sw_mac_link_set(ds, port, interface, false); + bcm_sf2_sw_mac_link_set(dp->ds, port, interface, false); } -static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, +static void bcm_sf2_sw_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - struct ethtool_eee *p = &priv->dev->ports[port].eee; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct bcm_sf2_priv *priv; u32 reg_rgmii_ctrl = 0; + struct ethtool_keee *p; + int port = dp->index; u32 reg, offset; - bcm_sf2_sw_mac_link_set(ds, port, interface, true); + bcm_sf2_sw_mac_link_set(dp->ds, port, interface, true); + priv = bcm_sf2_to_priv(dp->ds); offset = bcm_sf2_port_override_offset(priv, port); if (phy_interface_mode_is_rgmii(interface) || @@ -882,8 +897,10 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, core_writel(priv, reg, offset); - if (mode == MLO_AN_PHY && phydev) - p->eee_enabled = b53_eee_init(ds, port, phydev); + if (mode == MLO_AN_PHY && phydev) { + p = &priv->dev->ports[port].eee; + p->eee_enabled = b53_eee_init(dp->ds, port, phydev); + } } static void bcm_sf2_sw_fixed_state(struct dsa_switch *ds, int port, @@ -909,7 +926,7 @@ static void bcm_sf2_sw_fixed_state(struct dsa_switch *ds, int port, * state machine and make it go in PHY_FORCING state instead. */ if (!status->link) - netif_carrier_off(dsa_to_port(ds, port)->slave); + netif_carrier_off(dsa_to_port(ds, port)->user); status->duplex = DUPLEX_FULL; } else { status->link = true; @@ -983,7 +1000,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds) static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port, struct ethtool_wolinfo *wol) { - struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port)); + struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port)); struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); struct ethtool_wolinfo pwol = { }; @@ -1007,7 +1024,7 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port, static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port, struct ethtool_wolinfo *wol) { - struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port)); + struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port)); struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; struct ethtool_wolinfo pwol = { }; @@ -1166,8 +1183,8 @@ static void bcm_sf2_sw_get_strings(struct dsa_switch *ds, int port, int cnt = b53_get_sset_count(ds, port, stringset); b53_get_strings(ds, port, stringset, data); - bcm_sf2_cfp_get_strings(ds, port, stringset, - data + cnt * ETH_GSTRING_LEN); + data += cnt * ETH_GSTRING_LEN; + bcm_sf2_cfp_get_strings(ds, port, stringset, &data); } static void bcm_sf2_sw_get_ethtool_stats(struct dsa_switch *ds, int port, @@ -1192,6 +1209,12 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds, int port, return cnt; } +static const struct phylink_mac_ops bcm_sf2_phylink_mac_ops = { + .mac_config = bcm_sf2_sw_mac_config, + .mac_link_down = bcm_sf2_sw_mac_link_down, + .mac_link_up = bcm_sf2_sw_mac_link_up, +}; + static const struct dsa_switch_ops bcm_sf2_ops = { .get_tag_protocol = b53_get_tag_protocol, .setup = bcm_sf2_sw_setup, @@ -1202,18 +1225,17 @@ static const struct dsa_switch_ops bcm_sf2_ops = { .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, .get_phy_flags = bcm_sf2_sw_get_phy_flags, .phylink_get_caps = bcm_sf2_sw_get_caps, - .phylink_mac_config = bcm_sf2_sw_mac_config, - .phylink_mac_link_down = bcm_sf2_sw_mac_link_down, - .phylink_mac_link_up = bcm_sf2_sw_mac_link_up, .phylink_fixed_state = bcm_sf2_sw_fixed_state, .suspend = bcm_sf2_sw_suspend, .resume = bcm_sf2_sw_resume, .get_wol = bcm_sf2_sw_get_wol, .set_wol = bcm_sf2_sw_set_wol, + .port_setup = b53_setup_port, .port_enable = bcm_sf2_port_setup, .port_disable = bcm_sf2_port_disable, - .get_mac_eee = b53_get_mac_eee, + .support_eee = b53_support_eee, .set_mac_eee = b53_set_mac_eee, + .set_ageing_time = b53_set_ageing_time, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_pre_bridge_flags = b53_br_flags_pre, @@ -1240,6 +1262,7 @@ struct bcm_sf2_of_data { unsigned int core_reg_align; unsigned int num_cfp_rules; unsigned int num_crossbar_int_ports; + unsigned int num_crossbar_ext_bits; }; static const u16 bcm_sf2_4908_reg_offsets[] = { @@ -1268,6 +1291,7 @@ static const struct bcm_sf2_of_data bcm_sf2_4908_data = { .reg_offsets = bcm_sf2_4908_reg_offsets, .num_cfp_rules = 256, .num_crossbar_int_ports = 2, + .num_crossbar_ext_bits = 2, }; /* Register offsets for the SWITCH_REG_* block */ @@ -1379,6 +1403,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) priv->core_reg_align = data->core_reg_align; priv->num_cfp_rules = data->num_cfp_rules; priv->num_crossbar_int_ports = data->num_crossbar_int_ports; + priv->num_crossbar_ext_bits = data->num_crossbar_ext_bits; priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev, "switch"); @@ -1395,6 +1420,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) priv->dev = dev; ds = dev->ds; ds->ops = &bcm_sf2_ops; + ds->phylink_mac_ops = &bcm_sf2_phylink_mac_ops; /* Advertise the 8 egress queues */ ds->num_tx_queues = SF2_NUM_EGRESS_QUEUES; @@ -1537,12 +1563,12 @@ out_clk: return ret; } -static int bcm_sf2_sw_remove(struct platform_device *pdev) +static void bcm_sf2_sw_remove(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); if (!priv) - return 0; + return; priv->wol_ports_mask = 0; /* Disable interrupts */ @@ -1554,8 +1580,6 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) clk_disable_unprepare(priv->clk); if (priv->type == BCM7278_DEVICE_ID) reset_control_assert(priv->rcdev); - - return 0; } static void bcm_sf2_sw_shutdown(struct platform_device *pdev) @@ -1601,7 +1625,7 @@ static SIMPLE_DEV_PM_OPS(bcm_sf2_pm_ops, static struct platform_driver bcm_sf2_driver = { .probe = bcm_sf2_sw_probe, - .remove = bcm_sf2_sw_remove, + .remove = bcm_sf2_sw_remove, .shutdown = bcm_sf2_sw_shutdown, .driver = { .name = "brcm-sf2", diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h index 00afc94ce522..be9f3b29019f 100644 --- a/drivers/net/dsa/bcm_sf2.h +++ b/drivers/net/dsa/bcm_sf2.h @@ -75,6 +75,7 @@ struct bcm_sf2_priv { unsigned int core_reg_align; unsigned int num_cfp_rules; unsigned int num_crossbar_int_ports; + unsigned int num_crossbar_ext_bits; /* spinlock protecting access to the indirect registers */ spinlock_t indir_lock; @@ -107,8 +108,7 @@ struct bcm_sf2_priv { /* Master and slave MDIO bus controller */ unsigned int indir_phy_mask; - struct device_node *master_mii_dn; - struct mii_bus *slave_mii_bus; + struct mii_bus *user_mii_bus; struct mii_bus *master_mii_bus; /* Bitmask of ports needing BRCM tags */ @@ -228,8 +228,8 @@ int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port, int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv); void bcm_sf2_cfp_exit(struct dsa_switch *ds); int bcm_sf2_cfp_resume(struct dsa_switch *ds); -void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port, - u32 stringset, uint8_t *data); +void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t **data); void bcm_sf2_cfp_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); int bcm_sf2_cfp_get_sset_count(struct dsa_switch *ds, int port, int sset); diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c index c4010b7bf089..e22362e6f0cd 100644 --- a/drivers/net/dsa/bcm_sf2_cfp.c +++ b/drivers/net/dsa/bcm_sf2_cfp.c @@ -1102,7 +1102,7 @@ static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv, int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, struct ethtool_rxnfc *nfc, u32 *rule_locs) { - struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port)); + struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port)); struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); int ret = 0; @@ -1145,7 +1145,7 @@ int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port, struct ethtool_rxnfc *nfc) { - struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port)); + struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port)); struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); int ret = 0; @@ -1279,27 +1279,19 @@ static const struct bcm_sf2_cfp_stat { }, }; -void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port, - u32 stringset, uint8_t *data) +void bcm_sf2_cfp_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t **data) { struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - unsigned int s = ARRAY_SIZE(bcm_sf2_cfp_stats); - char buf[ETH_GSTRING_LEN]; - unsigned int i, j, iter; + unsigned int i, j; if (stringset != ETH_SS_STATS) return; - for (i = 1; i < priv->num_cfp_rules; i++) { - for (j = 0; j < s; j++) { - snprintf(buf, sizeof(buf), - "CFP%03d_%sCntr", - i, bcm_sf2_cfp_stats[j].name); - iter = (i - 1) * s + j; - strscpy(data + iter * ETH_GSTRING_LEN, - buf, ETH_GSTRING_LEN); - } - } + for (i = 1; i < priv->num_cfp_rules; i++) + for (j = 0; j < ARRAY_SIZE(bcm_sf2_cfp_stats); j++) + ethtool_sprintf(data, "CFP%03d_%sCntr", i, + bcm_sf2_cfp_stats[j].name); } void bcm_sf2_cfp_get_ethtool_stats(struct dsa_switch *ds, int port, diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c index 5b139f2206b6..4a416f2717ba 100644 --- a/drivers/net/dsa/dsa_loop.c +++ b/drivers/net/dsa/dsa_loop.c @@ -17,7 +17,19 @@ #include <linux/dsa/loop.h> #include <net/dsa.h> -#include "dsa_loop.h" +#define DSA_LOOP_NUM_PORTS 6 +#define DSA_LOOP_CPU_PORT (DSA_LOOP_NUM_PORTS - 1) +#define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) + +struct dsa_loop_pdata { + /* Must be first, such that dsa_register_switch() can access this + * without gory pointer manipulations + */ + struct dsa_chip_data cd; + const char *name; + unsigned int enabled_ports; + const char *netdev; +}; static struct dsa_loop_mib_entry dsa_loop_mibs[] = { [DSA_LOOP_PHY_READ_OK] = { "phy_read_ok", }, @@ -27,6 +39,7 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = { }; static struct phy_device *phydevs[PHY_MAX_ADDR]; +static struct mdio_device *switch_mdiodev; enum dsa_loop_devlink_resource_id { DSA_LOOP_DEVLINK_PARAM_ID_VTU, @@ -121,8 +134,7 @@ static void dsa_loop_get_strings(struct dsa_switch *ds, int port, return; for (i = 0; i < __DSA_LOOP_CNT_MAX; i++) - memcpy(data + i * ETH_GSTRING_LEN, - ps->ports[port].mib[i].name, ETH_GSTRING_LEN); + ethtool_puts(&data, ps->ports[port].mib[i].name); } static void dsa_loop_get_ethtool_stats(struct dsa_switch *ds, int port, @@ -277,6 +289,14 @@ static int dsa_loop_port_max_mtu(struct dsa_switch *ds, int port) return ETH_MAX_MTU; } +static void dsa_loop_phylink_get_caps(struct dsa_switch *dsa, int port, + struct phylink_config *config) +{ + bitmap_fill(config->supported_interfaces, PHY_INTERFACE_MODE_MAX); + __clear_bit(PHY_INTERFACE_MODE_NA, config->supported_interfaces); + config->mac_capabilities = ~0; +} + static const struct dsa_switch_ops dsa_loop_driver = { .get_tag_protocol = dsa_loop_get_protocol, .setup = dsa_loop_setup, @@ -295,6 +315,7 @@ static const struct dsa_switch_ops dsa_loop_driver = { .port_vlan_del = dsa_loop_port_vlan_del, .port_change_mtu = dsa_loop_port_change_mtu, .port_max_mtu = dsa_loop_port_max_mtu, + .phylink_get_caps = dsa_loop_phylink_get_caps, }; static int dsa_loop_drv_probe(struct mdio_device *mdiodev) @@ -374,34 +395,68 @@ static struct mdio_driver dsa_loop_drv = { .shutdown = dsa_loop_drv_shutdown, }; -#define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) - static void dsa_loop_phydevs_unregister(void) { - unsigned int i; - - for (i = 0; i < NUM_FIXED_PHYS; i++) - if (!IS_ERR(phydevs[i])) { + for (int i = 0; i < NUM_FIXED_PHYS; i++) { + if (!IS_ERR(phydevs[i])) fixed_phy_unregister(phydevs[i]); - phy_device_free(phydevs[i]); - } + } } -static int __init dsa_loop_init(void) +static int __init dsa_loop_create_switch_mdiodev(void) { - struct fixed_phy_status status = { - .link = 1, - .speed = SPEED_100, - .duplex = DUPLEX_FULL, + static struct dsa_loop_pdata dsa_loop_pdata = { + .cd = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[DSA_LOOP_CPU_PORT] = "cpu", + }, + .name = "DSA mockup driver", + .enabled_ports = 0x1f, + .netdev = "eth0", }; - unsigned int i, ret; + struct mii_bus *bus; + int ret = -ENODEV; + + bus = mdio_find_bus("fixed-0"); + if (WARN_ON(!bus)) + return ret; + + switch_mdiodev = mdio_device_create(bus, 31); + if (IS_ERR(switch_mdiodev)) + goto out; + + strscpy(switch_mdiodev->modalias, "dsa-loop"); + switch_mdiodev->dev.platform_data = &dsa_loop_pdata; + + ret = mdio_device_register(switch_mdiodev); + if (ret) + mdio_device_free(switch_mdiodev); +out: + put_device(&bus->dev); + return ret; +} + +static int __init dsa_loop_init(void) +{ + unsigned int i; + int ret; + + ret = dsa_loop_create_switch_mdiodev(); + if (ret) + return ret; for (i = 0; i < NUM_FIXED_PHYS; i++) - phydevs[i] = fixed_phy_register(PHY_POLL, &status, NULL); + phydevs[i] = fixed_phy_register_100fd(); ret = mdio_driver_register(&dsa_loop_drv); - if (ret) + if (ret) { dsa_loop_phydevs_unregister(); + mdio_device_remove(switch_mdiodev); + mdio_device_free(switch_mdiodev); + } return ret; } @@ -411,10 +466,11 @@ static void __exit dsa_loop_exit(void) { mdio_driver_unregister(&dsa_loop_drv); dsa_loop_phydevs_unregister(); + mdio_device_remove(switch_mdiodev); + mdio_device_free(switch_mdiodev); } module_exit(dsa_loop_exit); -MODULE_SOFTDEP("pre: dsa_loop_bdinfo"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Florian Fainelli"); MODULE_DESCRIPTION("DSA loopback driver"); diff --git a/drivers/net/dsa/dsa_loop.h b/drivers/net/dsa/dsa_loop.h deleted file mode 100644 index 93e5c15d0efd..000000000000 --- a/drivers/net/dsa/dsa_loop.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DSA_LOOP_H -#define __DSA_LOOP_H - -struct dsa_chip_data; - -struct dsa_loop_pdata { - /* Must be first, such that dsa_register_switch() can access this - * without gory pointer manipulations - */ - struct dsa_chip_data cd; - const char *name; - unsigned int enabled_ports; - const char *netdev; -}; - -#define DSA_LOOP_NUM_PORTS 6 -#define DSA_LOOP_CPU_PORT (DSA_LOOP_NUM_PORTS - 1) - -#endif /* __DSA_LOOP_H */ diff --git a/drivers/net/dsa/dsa_loop_bdinfo.c b/drivers/net/dsa/dsa_loop_bdinfo.c deleted file mode 100644 index 237066d30704..000000000000 --- a/drivers/net/dsa/dsa_loop_bdinfo.c +++ /dev/null @@ -1,35 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/phy.h> -#include <net/dsa.h> - -#include "dsa_loop.h" - -static struct dsa_loop_pdata dsa_loop_pdata = { - .cd = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[DSA_LOOP_CPU_PORT] = "cpu", - }, - .name = "DSA mockup driver", - .enabled_ports = 0x1f, - .netdev = "eth0", -}; - -static const struct mdio_board_info bdinfo = { - .bus_id = "fixed-0", - .modalias = "dsa-loop", - .mdio_addr = 31, - .platform_data = &dsa_loop_pdata, -}; - -static int __init dsa_loop_bdinfo_init(void) -{ - return mdiobus_register_board_info(&bdinfo, 1); -} -arch_initcall(dsa_loop_bdinfo_init) - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c index 11ef1d7ea229..dd5f263ab984 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.c +++ b/drivers/net/dsa/hirschmann/hellcreek.c @@ -294,12 +294,8 @@ static void hellcreek_get_strings(struct dsa_switch *ds, int port, { int i; - for (i = 0; i < ARRAY_SIZE(hellcreek_counter); ++i) { - const struct hellcreek_counter *counter = &hellcreek_counter[i]; - - strscpy(data + i * ETH_GSTRING_LEN, - counter->name, ETH_GSTRING_LEN); - } + for (i = 0; i < ARRAY_SIZE(hellcreek_counter); ++i) + ethtool_puts(&data, hellcreek_counter[i].name); } static int hellcreek_get_sset_count(struct dsa_switch *ds, int port, int sset) @@ -1065,7 +1061,7 @@ static void hellcreek_setup_tc_identity_mapping(struct hellcreek *hellcreek) static int hellcreek_setup_fdb(struct hellcreek *hellcreek) { - static struct hellcreek_fdb_entry l2_ptp = { + static const struct hellcreek_fdb_entry l2_ptp = { /* MAC: 01-1B-19-00-00-00 */ .mac = { 0x01, 0x1b, 0x19, 0x00, 0x00, 0x00 }, .portmask = 0x03, /* Management ports */ @@ -1076,7 +1072,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */ .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp4_ptp = { + static const struct hellcreek_fdb_entry udp4_ptp = { /* MAC: 01-00-5E-00-01-81 */ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x01, 0x81 }, .portmask = 0x03, /* Management ports */ @@ -1087,7 +1083,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp6_ptp = { + static const struct hellcreek_fdb_entry udp6_ptp = { /* MAC: 33-33-00-00-01-81 */ .mac = { 0x33, 0x33, 0x00, 0x00, 0x01, 0x81 }, .portmask = 0x03, /* Management ports */ @@ -1098,7 +1094,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry l2_p2p = { + static const struct hellcreek_fdb_entry l2_p2p = { /* MAC: 01-80-C2-00-00-0E */ .mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e }, .portmask = 0x03, /* Management ports */ @@ -1109,7 +1105,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */ .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp4_p2p = { + static const struct hellcreek_fdb_entry udp4_p2p = { /* MAC: 01-00-5E-00-00-6B */ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x00, 0x6b }, .portmask = 0x03, /* Management ports */ @@ -1120,7 +1116,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp6_p2p = { + static const struct hellcreek_fdb_entry udp6_p2p = { /* MAC: 33-33-00-00-00-6B */ .mac = { 0x33, 0x33, 0x00, 0x00, 0x00, 0x6b }, .portmask = 0x03, /* Management ports */ @@ -1131,7 +1127,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry stp = { + static const struct hellcreek_fdb_entry stp = { /* MAC: 01-80-C2-00-00-00 */ .mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }, .portmask = 0x03, /* Management ports */ @@ -1324,13 +1320,13 @@ static int hellcreek_devlink_region_fdb_snapshot(struct devlink *dl, return 0; } -static struct devlink_region_ops hellcreek_region_vlan_ops = { +static const struct devlink_region_ops hellcreek_region_vlan_ops = { .name = "vlan", .snapshot = hellcreek_devlink_region_vlan_snapshot, .destructor = kfree, }; -static struct devlink_region_ops hellcreek_region_fdb_ops = { +static const struct devlink_region_ops hellcreek_region_fdb_ops = { .name = "fdb", .snapshot = hellcreek_devlink_region_fdb_snapshot, .destructor = kfree, @@ -1339,7 +1335,7 @@ static struct devlink_region_ops hellcreek_region_fdb_ops = { static int hellcreek_setup_devlink_regions(struct dsa_switch *ds) { struct hellcreek *hellcreek = ds->priv; - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; struct devlink_region *region; u64 size; int ret; @@ -1930,6 +1926,8 @@ static const struct dsa_switch_ops hellcreek_ds_ops = { .port_vlan_filtering = hellcreek_vlan_filtering, .setup = hellcreek_setup, .teardown = hellcreek_teardown, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int hellcreek_probe(struct platform_device *pdev) @@ -2060,18 +2058,16 @@ err_ptp_setup: return ret; } -static int hellcreek_remove(struct platform_device *pdev) +static void hellcreek_remove(struct platform_device *pdev) { struct hellcreek *hellcreek = platform_get_drvdata(pdev); if (!hellcreek) - return 0; + return; hellcreek_hwtstamp_free(hellcreek); hellcreek_ptp_free(hellcreek); dsa_unregister_switch(hellcreek->ds); - - return 0; } static void hellcreek_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/hirschmann/hellcreek.h b/drivers/net/dsa/hirschmann/hellcreek.h index 6874cb9dc361..bebf0d3ff330 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.h +++ b/drivers/net/dsa/hirschmann/hellcreek.h @@ -12,14 +12,16 @@ #include <linux/bitmap.h> #include <linux/bitops.h> +#include <linux/container_of.h> #include <linux/device.h> -#include <linux/kernel.h> -#include <linux/mutex.h> -#include <linux/workqueue.h> #include <linux/leds.h> +#include <linux/mutex.h> #include <linux/platform_data/hirschmann-hellcreek.h> #include <linux/ptp_clock_kernel.h> #include <linux/timecounter.h> +#include <linux/types.h> +#include <linux/workqueue.h> + #include <net/dsa.h> #include <net/pkt_sched.h> @@ -242,7 +244,7 @@ struct hellcreek_port_hwtstamp { struct sk_buff *tx_skb; /* Current timestamp configuration */ - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; }; struct hellcreek_port { diff --git a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c index bd7aacc71a63..99941ff1ebf9 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c +++ b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c @@ -16,7 +16,7 @@ #include "hellcreek_ptp.h" int hellcreek_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { struct hellcreek *hellcreek = ds->priv; @@ -40,7 +40,7 @@ int hellcreek_get_ts_info(struct dsa_switch *ds, int port, * the user requested what is actually available or not */ static int hellcreek_set_hwtstamp_config(struct hellcreek *hellcreek, int port, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { struct hellcreek_port_hwtstamp *ps = &hellcreek->ports[port].port_hwtstamp; @@ -110,41 +110,35 @@ static int hellcreek_set_hwtstamp_config(struct hellcreek *hellcreek, int port, } int hellcreek_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct hellcreek *hellcreek = ds->priv; struct hellcreek_port_hwtstamp *ps; - struct hwtstamp_config config; int err; ps = &hellcreek->ports[port].port_hwtstamp; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - err = hellcreek_set_hwtstamp_config(hellcreek, port, &config); + err = hellcreek_set_hwtstamp_config(hellcreek, port, config); if (err) return err; /* Save the chosen configuration to be returned later */ - memcpy(&ps->tstamp_config, &config, sizeof(config)); + ps->tstamp_config = *config; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int hellcreek_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct hellcreek *hellcreek = ds->priv; struct hellcreek_port_hwtstamp *ps; - struct hwtstamp_config *config; ps = &hellcreek->ports[port].port_hwtstamp; - config = &ps->tstamp_config; + *config = ps->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } /* Returns a pointer to the PTP header if the caller should time stamp, or NULL diff --git a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h index 71af77efb28b..388821c4aa10 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h +++ b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h @@ -38,9 +38,10 @@ #define TX_TSTAMP_TIMEOUT msecs_to_jiffies(40) int hellcreek_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); int hellcreek_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *config); bool hellcreek_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *clone, unsigned int type); @@ -48,7 +49,7 @@ void hellcreek_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); int hellcreek_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info); + struct kernel_ethtool_ts_info *info); long hellcreek_hwtstamp_work(struct ptp_clock_info *ptp); diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c index 5249a1c2a80b..cb23bea9c21b 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c +++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c @@ -27,7 +27,8 @@ void hellcreek_ptp_write(struct hellcreek *hellcreek, u16 data, } /* Get nanoseconds from PTP clock */ -static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek) +static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek, + struct ptp_system_timestamp *sts) { u16 nsl, nsh; @@ -45,16 +46,19 @@ static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek) nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C); nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C); nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C); + ptp_read_system_prets(sts); nsl = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C); + ptp_read_system_postts(sts); return (u64)nsl | ((u64)nsh << 16); } -static u64 __hellcreek_ptp_gettime(struct hellcreek *hellcreek) +static u64 __hellcreek_ptp_gettime(struct hellcreek *hellcreek, + struct ptp_system_timestamp *sts) { u64 ns; - ns = hellcreek_ptp_clock_read(hellcreek); + ns = hellcreek_ptp_clock_read(hellcreek, sts); if (ns < hellcreek->last_ts) hellcreek->seconds++; hellcreek->last_ts = ns; @@ -72,7 +76,7 @@ u64 hellcreek_ptp_gettime_seconds(struct hellcreek *hellcreek, u64 ns) { u64 s; - __hellcreek_ptp_gettime(hellcreek); + __hellcreek_ptp_gettime(hellcreek, NULL); if (hellcreek->last_ts > ns) s = hellcreek->seconds * NSEC_PER_SEC; else @@ -81,14 +85,15 @@ u64 hellcreek_ptp_gettime_seconds(struct hellcreek *hellcreek, u64 ns) return s; } -static int hellcreek_ptp_gettime(struct ptp_clock_info *ptp, - struct timespec64 *ts) +static int hellcreek_ptp_gettimex(struct ptp_clock_info *ptp, + struct timespec64 *ts, + struct ptp_system_timestamp *sts) { struct hellcreek *hellcreek = ptp_to_hellcreek(ptp); u64 ns; mutex_lock(&hellcreek->ptp_lock); - ns = __hellcreek_ptp_gettime(hellcreek); + ns = __hellcreek_ptp_gettime(hellcreek, sts); mutex_unlock(&hellcreek->ptp_lock); *ts = ns_to_timespec64(ns); @@ -184,7 +189,7 @@ static int hellcreek_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) if (abs(delta) > MAX_SLOW_OFFSET_ADJ) { struct timespec64 now, then = ns_to_timespec64(delta); - hellcreek_ptp_gettime(ptp, &now); + hellcreek_ptp_gettimex(ptp, &now, NULL); now = timespec64_add(now, then); hellcreek_ptp_settime(ptp, &now); @@ -233,7 +238,7 @@ static void hellcreek_ptp_overflow_check(struct work_struct *work) hellcreek = dw_overflow_to_hellcreek(dw); mutex_lock(&hellcreek->ptp_lock); - __hellcreek_ptp_gettime(hellcreek); + __hellcreek_ptp_gettime(hellcreek, NULL); mutex_unlock(&hellcreek->ptp_lock); schedule_delayed_work(&hellcreek->overflow_work, @@ -371,8 +376,18 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek) hellcreek_set_brightness(hellcreek, STATUS_OUT_IS_GM, 1); /* Register both leds */ - led_classdev_register(hellcreek->dev, &hellcreek->led_sync_good); - led_classdev_register(hellcreek->dev, &hellcreek->led_is_gm); + ret = led_classdev_register(hellcreek->dev, &hellcreek->led_sync_good); + if (ret) { + dev_err(hellcreek->dev, "Failed to register sync_good LED\n"); + goto out; + } + + ret = led_classdev_register(hellcreek->dev, &hellcreek->led_is_gm); + if (ret) { + dev_err(hellcreek->dev, "Failed to register is_gm LED\n"); + led_classdev_unregister(&hellcreek->led_sync_good); + goto out; + } ret = 0; @@ -409,7 +424,7 @@ int hellcreek_ptp_setup(struct hellcreek *hellcreek) hellcreek->ptp_clock_info.pps = 0; hellcreek->ptp_clock_info.adjfine = hellcreek_ptp_adjfine; hellcreek->ptp_clock_info.adjtime = hellcreek_ptp_adjtime; - hellcreek->ptp_clock_info.gettime64 = hellcreek_ptp_gettime; + hellcreek->ptp_clock_info.gettimex64 = hellcreek_ptp_gettimex; hellcreek->ptp_clock_info.settime64 = hellcreek_ptp_settime; hellcreek->ptp_clock_info.enable = hellcreek_ptp_enable; hellcreek->ptp_clock_info.do_aux_work = hellcreek_hwtstamp_work; diff --git a/drivers/net/dsa/ks8995.c b/drivers/net/dsa/ks8995.c new file mode 100644 index 000000000000..77d8b842693c --- /dev/null +++ b/drivers/net/dsa/ks8995.c @@ -0,0 +1,857 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches + * + * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2025 Linus Walleij <linus.walleij@linaro.org> + * + * This file was based on: drivers/spi/at25.c + * Copyright (C) 2006 David Brownell + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bits.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/spi/spi.h> +#include <net/dsa.h> + +#define DRV_VERSION "0.1.1" +#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver" + +/* ------------------------------------------------------------------------ */ + +#define KS8995_REG_ID0 0x00 /* Chip ID0 */ +#define KS8995_REG_ID1 0x01 /* Chip ID1 */ + +#define KS8995_REG_GC0 0x02 /* Global Control 0 */ + +#define KS8995_GC0_P5_PHY BIT(3) /* Port 5 PHY enabled */ + +#define KS8995_REG_GC1 0x03 /* Global Control 1 */ +#define KS8995_REG_GC2 0x04 /* Global Control 2 */ + +#define KS8995_GC2_HUGE BIT(2) /* Huge packet support */ +#define KS8995_GC2_LEGAL BIT(1) /* Legal size override */ + +#define KS8995_REG_GC3 0x05 /* Global Control 3 */ +#define KS8995_REG_GC4 0x06 /* Global Control 4 */ + +#define KS8995_GC4_10BT BIT(4) /* Force switch to 10Mbit */ +#define KS8995_GC4_MII_FLOW BIT(5) /* MII full-duplex flow control enable */ +#define KS8995_GC4_MII_HD BIT(6) /* MII half-duplex mode enable */ + +#define KS8995_REG_GC5 0x07 /* Global Control 5 */ +#define KS8995_REG_GC6 0x08 /* Global Control 6 */ +#define KS8995_REG_GC7 0x09 /* Global Control 7 */ +#define KS8995_REG_GC8 0x0a /* Global Control 8 */ +#define KS8995_REG_GC9 0x0b /* Global Control 9 */ + +#define KS8995_GC9_SPECIAL BIT(0) /* Special tagging mode (DSA) */ + +/* In DSA the ports 1-4 are numbered 0-3 and the CPU port is port 4 */ +#define KS8995_REG_PC(p, r) (0x10 + (0x10 * (p)) + (r)) /* Port Control */ +#define KS8995_REG_PS(p, r) (0x1e + (0x10 * (p)) + (r)) /* Port Status */ + +#define KS8995_REG_PC0 0x00 /* Port Control 0 */ +#define KS8995_REG_PC1 0x01 /* Port Control 1 */ +#define KS8995_REG_PC2 0x02 /* Port Control 2 */ +#define KS8995_REG_PC3 0x03 /* Port Control 3 */ +#define KS8995_REG_PC4 0x04 /* Port Control 4 */ +#define KS8995_REG_PC5 0x05 /* Port Control 5 */ +#define KS8995_REG_PC6 0x06 /* Port Control 6 */ +#define KS8995_REG_PC7 0x07 /* Port Control 7 */ +#define KS8995_REG_PC8 0x08 /* Port Control 8 */ +#define KS8995_REG_PC9 0x09 /* Port Control 9 */ +#define KS8995_REG_PC10 0x0a /* Port Control 10 */ +#define KS8995_REG_PC11 0x0b /* Port Control 11 */ +#define KS8995_REG_PC12 0x0c /* Port Control 12 */ +#define KS8995_REG_PC13 0x0d /* Port Control 13 */ + +#define KS8995_PC0_TAG_INS BIT(2) /* Enable tag insertion on port */ +#define KS8995_PC0_TAG_REM BIT(1) /* Enable tag removal on port */ +#define KS8995_PC0_PRIO_EN BIT(0) /* Enable priority handling */ + +#define KS8995_PC2_TXEN BIT(2) /* Enable TX on port */ +#define KS8995_PC2_RXEN BIT(1) /* Enable RX on port */ +#define KS8995_PC2_LEARN_DIS BIT(0) /* Disable learning on port */ + +#define KS8995_PC13_TXDIS BIT(6) /* Disable transmitter */ +#define KS8995_PC13_PWDN BIT(3) /* Power down */ + +#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */ +#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */ +#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */ +#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */ +#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */ +#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */ +#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */ +#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */ + +#define KS8995_REG_MAC0 0x68 /* MAC address 0 */ +#define KS8995_REG_MAC1 0x69 /* MAC address 1 */ +#define KS8995_REG_MAC2 0x6a /* MAC address 2 */ +#define KS8995_REG_MAC3 0x6b /* MAC address 3 */ +#define KS8995_REG_MAC4 0x6c /* MAC address 4 */ +#define KS8995_REG_MAC5 0x6d /* MAC address 5 */ + +#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */ +#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */ +#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */ +#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */ +#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */ +#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */ +#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */ +#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */ +#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */ +#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */ + +#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */ + +#define KS8995_REGS_SIZE 0x80 +#define KSZ8864_REGS_SIZE 0x100 +#define KSZ8795_REGS_SIZE 0x100 + +#define ID1_CHIPID_M 0xf +#define ID1_CHIPID_S 4 +#define ID1_REVISION_M 0x7 +#define ID1_REVISION_S 1 +#define ID1_START_SW 1 /* start the switch */ + +#define FAMILY_KS8995 0x95 +#define FAMILY_KSZ8795 0x87 +#define CHIPID_M 0 +#define KS8995_CHIP_ID 0x00 +#define KSZ8864_CHIP_ID 0x01 +#define KSZ8795_CHIP_ID 0x09 + +#define KS8995_CMD_WRITE 0x02U +#define KS8995_CMD_READ 0x03U + +#define KS8995_CPU_PORT 4 +#define KS8995_NUM_PORTS 5 /* 5 ports including the CPU port */ +#define KS8995_RESET_DELAY 10 /* usec */ + +enum ks8995_chip_variant { + ks8995, + ksz8864, + ksz8795, + max_variant +}; + +struct ks8995_chip_params { + char *name; + int family_id; + int chip_id; + int regs_size; + int addr_width; + int addr_shift; +}; + +static const struct ks8995_chip_params ks8995_chip[] = { + [ks8995] = { + .name = "KS8995MA", + .family_id = FAMILY_KS8995, + .chip_id = KS8995_CHIP_ID, + .regs_size = KS8995_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8864] = { + .name = "KSZ8864RMN", + .family_id = FAMILY_KS8995, + .chip_id = KSZ8864_CHIP_ID, + .regs_size = KSZ8864_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8795] = { + .name = "KSZ8795CLX", + .family_id = FAMILY_KSZ8795, + .chip_id = KSZ8795_CHIP_ID, + .regs_size = KSZ8795_REGS_SIZE, + .addr_width = 12, + .addr_shift = 1, + }, +}; + +struct ks8995_switch { + struct spi_device *spi; + struct device *dev; + struct dsa_switch *ds; + struct mutex lock; + struct gpio_desc *reset_gpio; + struct bin_attribute regs_attr; + const struct ks8995_chip_params *chip; + int revision_id; + unsigned int max_mtu[KS8995_NUM_PORTS]; +}; + +static const struct spi_device_id ks8995_id[] = { + {"ks8995", ks8995}, + {"ksz8864", ksz8864}, + {"ksz8795", ksz8795}, + { } +}; +MODULE_DEVICE_TABLE(spi, ks8995_id); + +static const struct of_device_id ks8995_spi_of_match[] = { + { .compatible = "micrel,ks8995" }, + { .compatible = "micrel,ksz8864" }, + { .compatible = "micrel,ksz8795" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ks8995_spi_of_match); + +static inline u8 get_chip_id(u8 val) +{ + return (val >> ID1_CHIPID_S) & ID1_CHIPID_M; +} + +static inline u8 get_chip_rev(u8 val) +{ + return (val >> ID1_REVISION_S) & ID1_REVISION_M; +} + +/* create_spi_cmd - create a chip specific SPI command header + * @ks: pointer to switch instance + * @cmd: SPI command for switch + * @address: register address for command + * + * Different chip families use different bit pattern to address the switches + * registers: + * + * KS8995: 8bit command + 8bit address + * KSZ8795: 3bit command + 12bit address + 1bit TR (?) + */ +static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd, + unsigned address) +{ + u16 result = cmd; + + /* make room for address (incl. address shift) */ + result <<= ks->chip->addr_width + ks->chip->addr_shift; + /* add address */ + result |= address << ks->chip->addr_shift; + /* SPI protocol needs big endian */ + return cpu_to_be16(result); +} +/* ------------------------------------------------------------------------ */ +static int ks8995_read(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static int ks8995_write(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf) +{ + return ks8995_read(ks, buf, addr, 1) != 1; +} + +static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val) +{ + char buf = val; + + return ks8995_write(ks, &buf, addr, 1) != 1; +} + +/* ------------------------------------------------------------------------ */ + +static int ks8995_stop(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 0); +} + +static int ks8995_start(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 1); +} + +static int ks8995_reset(struct ks8995_switch *ks) +{ + int err; + + err = ks8995_stop(ks); + if (err) + return err; + + udelay(KS8995_RESET_DELAY); + + return ks8995_start(ks); +} + +/* ks8995_get_revision - get chip revision + * @ks: pointer to switch instance + * + * Verify chip family and id and get chip revision. + */ +static int ks8995_get_revision(struct ks8995_switch *ks) +{ + int err; + u8 id0, id1, ksz8864_id; + + /* read family id */ + err = ks8995_read_reg(ks, KS8995_REG_ID0, &id0); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify family id */ + if (id0 != ks->chip->family_id) { + dev_err(&ks->spi->dev, "chip family id mismatch: expected 0x%02x but 0x%02x read\n", + ks->chip->family_id, id0); + err = -ENODEV; + goto err_out; + } + + switch (ks->chip->family_id) { + case FAMILY_KS8995: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify chip id */ + if ((get_chip_id(id1) == CHIPID_M) && + (get_chip_id(id1) == ks->chip->chip_id)) { + /* KS8995MA */ + ks->revision_id = get_chip_rev(id1); + } else if (get_chip_id(id1) != CHIPID_M) { + /* KSZ8864RMN */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &ksz8864_id); + if (err) { + err = -EIO; + goto err_out; + } + + if ((ksz8864_id & 0x80) && + (ks->chip->chip_id == KSZ8864_CHIP_ID)) { + ks->revision_id = get_chip_rev(id1); + } + + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KS8995 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + case FAMILY_KSZ8795: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + if (get_chip_id(id1) == ks->chip->chip_id) { + ks->revision_id = get_chip_rev(id1); + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KSZ8795 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + default: + dev_err(&ks->spi->dev, "unsupported family id: 0x%02x\n", id0); + err = -ENODEV; + break; + } +err_out: + return err; +} + +static int ks8995_check_config(struct ks8995_switch *ks) +{ + int ret; + u8 val; + + ret = ks8995_read_reg(ks, KS8995_REG_GC0, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC0\n"); + return ret; + } + + dev_dbg(ks->dev, "port 5 PHY %senabled\n", + (val & KS8995_GC0_P5_PHY) ? "" : "not "); + + val |= KS8995_GC0_P5_PHY; + ret = ks8995_write_reg(ks, KS8995_REG_GC0, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC0\n"); + + dev_dbg(ks->dev, "set KS8995_REG_GC0 to 0x%02x\n", val); + + return 0; +} + +static void +ks8995_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ +} + +static void +ks8995_mac_link_up(struct phylink_config *config, struct phy_device *phydev, + unsigned int mode, phy_interface_t interface, + int speed, int duplex, bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ks8995_switch *ks = dp->ds->priv; + int port = dp->index; + int ret; + u8 val; + + /* Allow forcing the mode on the fixed CPU port, no autonegotiation. + * We assume autonegotiation works on the PHY-facing ports. + */ + if (port != KS8995_CPU_PORT) + return; + + dev_dbg(ks->dev, "MAC link up on CPU port (%d)\n", port); + + ret = ks8995_read_reg(ks, KS8995_REG_GC4, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC4\n"); + return; + } + + /* Conjure port config */ + switch (speed) { + case SPEED_10: + dev_dbg(ks->dev, "set switch MII to 100Mbit mode\n"); + val |= KS8995_GC4_10BT; + break; + case SPEED_100: + default: + dev_dbg(ks->dev, "set switch MII to 100Mbit mode\n"); + val &= ~KS8995_GC4_10BT; + break; + } + + if (duplex == DUPLEX_HALF) { + dev_dbg(ks->dev, "set switch MII to half duplex\n"); + val |= KS8995_GC4_MII_HD; + } else { + dev_dbg(ks->dev, "set switch MII to full duplex\n"); + val &= ~KS8995_GC4_MII_HD; + } + + dev_dbg(ks->dev, "set KS8995_REG_GC4 to %02x\n", val); + + /* Enable the CPU port */ + ret = ks8995_write_reg(ks, KS8995_REG_GC4, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC4\n"); +} + +static void +ks8995_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ks8995_switch *ks = dp->ds->priv; + int port = dp->index; + + if (port != KS8995_CPU_PORT) + return; + + dev_dbg(ks->dev, "MAC link down on CPU port (%d)\n", port); + + /* Disable the CPU port */ +} + +static const struct phylink_mac_ops ks8995_phylink_mac_ops = { + .mac_config = ks8995_mac_config, + .mac_link_up = ks8995_mac_link_up, + .mac_link_down = ks8995_mac_link_down, +}; + +static enum +dsa_tag_protocol ks8995_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + /* This switch actually uses the 6 byte KS8995 protocol */ + return DSA_TAG_PROTO_NONE; +} + +static int ks8995_setup(struct dsa_switch *ds) +{ + return 0; +} + +static int ks8995_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct ks8995_switch *ks = ds->priv; + + dev_dbg(ks->dev, "enable port %d\n", port); + + return 0; +} + +static void ks8995_port_disable(struct dsa_switch *ds, int port) +{ + struct ks8995_switch *ks = ds->priv; + + dev_dbg(ks->dev, "disable port %d\n", port); +} + +static int ks8995_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + /* We support enabling/disabling learning */ + if (flags.mask & ~(BR_LEARNING)) + return -EINVAL; + + return 0; +} + +static int ks8995_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct ks8995_switch *ks = ds->priv; + int ret; + u8 val; + + if (flags.mask & BR_LEARNING) { + ret = ks8995_read_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_PC2 on port %d\n", port); + return ret; + } + + if (flags.val & BR_LEARNING) + val &= ~KS8995_PC2_LEARN_DIS; + else + val |= KS8995_PC2_LEARN_DIS; + + ret = ks8995_write_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), val); + if (ret) { + dev_err(ks->dev, "failed to write KS8995_REG_PC2 on port %d\n", port); + return ret; + } + } + + return 0; +} + +static void ks8995_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct ks8995_switch *ks = ds->priv; + int ret; + u8 val; + + ret = ks8995_read_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_PC2 on port %d\n", port); + return; + } + + /* Set the bits for the different STP states in accordance with + * the datasheet, pages 36-37 "Spanning tree support". + */ + switch (state) { + case BR_STATE_DISABLED: + case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: + val &= ~KS8995_PC2_TXEN; + val &= ~KS8995_PC2_RXEN; + val |= KS8995_PC2_LEARN_DIS; + break; + case BR_STATE_LEARNING: + val &= ~KS8995_PC2_TXEN; + val &= ~KS8995_PC2_RXEN; + val &= ~KS8995_PC2_LEARN_DIS; + break; + case BR_STATE_FORWARDING: + val |= KS8995_PC2_TXEN; + val |= KS8995_PC2_RXEN; + val &= ~KS8995_PC2_LEARN_DIS; + break; + default: + dev_err(ks->dev, "unknown bridge state requested\n"); + return; + } + + ret = ks8995_write_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), val); + if (ret) { + dev_err(ks->dev, "failed to write KS8995_REG_PC2 on port %d\n", port); + return; + } + + dev_dbg(ks->dev, "set KS8995_REG_PC2 for port %d to %02x\n", port, val); +} + +static void ks8995_phylink_get_caps(struct dsa_switch *dsa, int port, + struct phylink_config *config) +{ + unsigned long *interfaces = config->supported_interfaces; + + if (port == KS8995_CPU_PORT) + __set_bit(PHY_INTERFACE_MODE_MII, interfaces); + + if (port <= 3) { + /* Internal PHYs */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces); + /* phylib default */ + __set_bit(PHY_INTERFACE_MODE_MII, interfaces); + } + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; +} + +/* Huge packet support up to 1916 byte packages "inclusive" + * which means that tags are included. If the bit is not set + * it is 1536 bytes "inclusive". We present the length without + * tags or ethernet headers. The setting affects all ports. + */ +static int ks8995_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct ks8995_switch *ks = ds->priv; + unsigned int max_mtu; + int ret; + u8 val; + int i; + + ks->max_mtu[port] = new_mtu; + + /* Roof out the MTU for the entire switch to the greatest + * common denominator: the biggest set for any one port will + * be the biggest MTU for the switch. + */ + max_mtu = ETH_DATA_LEN; + for (i = 0; i < KS8995_NUM_PORTS; i++) { + if (ks->max_mtu[i] > max_mtu) + max_mtu = ks->max_mtu[i]; + } + + /* Translate to layer 2 size. + * Add ethernet and (possible) VLAN headers, and checksum to the size. + * For ETH_DATA_LEN (1500 bytes) this will add up to 1522 bytes. + */ + max_mtu += VLAN_ETH_HLEN; + max_mtu += ETH_FCS_LEN; + + ret = ks8995_read_reg(ks, KS8995_REG_GC2, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC2\n"); + return ret; + } + + if (max_mtu <= 1522) { + val &= ~KS8995_GC2_HUGE; + val &= ~KS8995_GC2_LEGAL; + } else if (max_mtu > 1522 && max_mtu <= 1536) { + /* This accepts packets up to 1536 bytes */ + val &= ~KS8995_GC2_HUGE; + val |= KS8995_GC2_LEGAL; + } else { + /* This accepts packets up to 1916 bytes */ + val |= KS8995_GC2_HUGE; + val |= KS8995_GC2_LEGAL; + } + + dev_dbg(ks->dev, "new max MTU %d bytes (inclusive)\n", max_mtu); + + ret = ks8995_write_reg(ks, KS8995_REG_GC2, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC2\n"); + + return ret; +} + +static int ks8995_get_max_mtu(struct dsa_switch *ds, int port) +{ + return 1916 - ETH_HLEN - ETH_FCS_LEN; +} + +static const struct dsa_switch_ops ks8995_ds_ops = { + .get_tag_protocol = ks8995_get_tag_protocol, + .setup = ks8995_setup, + .port_pre_bridge_flags = ks8995_port_pre_bridge_flags, + .port_bridge_flags = ks8995_port_bridge_flags, + .port_enable = ks8995_port_enable, + .port_disable = ks8995_port_disable, + .port_stp_state_set = ks8995_port_stp_state_set, + .port_change_mtu = ks8995_change_mtu, + .port_max_mtu = ks8995_get_max_mtu, + .phylink_get_caps = ks8995_phylink_get_caps, +}; + +/* ------------------------------------------------------------------------ */ +static int ks8995_probe(struct spi_device *spi) +{ + struct ks8995_switch *ks; + int err; + int variant = spi_get_device_id(spi)->driver_data; + + if (variant >= max_variant) { + dev_err(&spi->dev, "bad chip variant %d\n", variant); + return -ENODEV; + } + + ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL); + if (!ks) + return -ENOMEM; + + mutex_init(&ks->lock); + ks->spi = spi; + ks->dev = &spi->dev; + ks->chip = &ks8995_chip[variant]; + + ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_HIGH); + err = PTR_ERR_OR_ZERO(ks->reset_gpio); + if (err) { + dev_err(&spi->dev, + "failed to get reset gpio: %d\n", err); + return err; + } + + err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset"); + if (err) + return err; + + if (ks->reset_gpio) { + /* + * If a reset line was obtained, wait for 100us after + * de-asserting RESET before accessing any registers, see + * the KS8995MA datasheet, page 44. + */ + gpiod_set_value_cansleep(ks->reset_gpio, 0); + udelay(100); + } + + spi_set_drvdata(spi, ks); + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err) { + dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); + return err; + } + + err = ks8995_get_revision(ks); + if (err) + return err; + + err = ks8995_reset(ks); + if (err) + return err; + + dev_info(&spi->dev, "%s device found, Chip ID:%x, Revision:%x\n", + ks->chip->name, ks->chip->chip_id, ks->revision_id); + + err = ks8995_check_config(ks); + if (err) + return err; + + ks->ds = devm_kzalloc(&spi->dev, sizeof(*ks->ds), GFP_KERNEL); + if (!ks->ds) + return -ENOMEM; + + ks->ds->dev = &spi->dev; + ks->ds->num_ports = KS8995_NUM_PORTS; + ks->ds->ops = &ks8995_ds_ops; + ks->ds->phylink_mac_ops = &ks8995_phylink_mac_ops; + ks->ds->priv = ks; + + err = dsa_register_switch(ks->ds); + if (err) + return dev_err_probe(&spi->dev, err, + "unable to register DSA switch\n"); + + return 0; +} + +static void ks8995_remove(struct spi_device *spi) +{ + struct ks8995_switch *ks = spi_get_drvdata(spi); + + dsa_unregister_switch(ks->ds); + /* assert reset */ + gpiod_set_value_cansleep(ks->reset_gpio, 1); +} + +/* ------------------------------------------------------------------------ */ +static struct spi_driver ks8995_driver = { + .driver = { + .name = "spi-ks8995", + .of_match_table = ks8995_spi_of_match, + }, + .probe = ks8995_probe, + .remove = ks8995_remove, + .id_table = ks8995_id, +}; + +module_spi_driver(ks8995_driver); + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index ee67adeb2cdb..d246f95d57ec 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -6,6 +6,7 @@ #include <linux/module.h> #include <linux/gpio/consumer.h> #include <linux/regmap.h> +#include <linux/iopoll.h> #include <linux/mutex.h> #include <linux/mii.h> #include <linux/of.h> @@ -839,6 +840,8 @@ static void lan9303_handle_reset(struct lan9303 *chip) if (!chip->reset_gpio) return; + gpiod_set_value_cansleep(chip->reset_gpio, 1); + if (chip->reset_duration != 0) msleep(chip->reset_duration); @@ -864,8 +867,34 @@ static int lan9303_disable_processing(struct lan9303 *chip) static int lan9303_check_device(struct lan9303 *chip) { int ret; + int err; u32 reg; + /* In I2C-managed configurations this polling loop will clash with + * switch's reading of EEPROM right after reset and this behaviour is + * not configurable. While lan9303_read() already has quite long retry + * timeout, seems not all cases are being detected as arbitration error. + * + * According to datasheet, EEPROM loader has 30ms timeout (in case of + * missing EEPROM). + * + * Loading of the largest supported EEPROM is expected to take at least + * 5.9s. + */ + err = read_poll_timeout(lan9303_read, ret, + !ret && reg & LAN9303_HW_CFG_READY, + 20000, 6000000, false, + chip->regmap, LAN9303_HW_CFG, ®); + if (ret) { + dev_err(chip->dev, "failed to read HW_CFG reg: %pe\n", + ERR_PTR(ret)); + return ret; + } + if (err) { + dev_err(chip->dev, "HW_CFG not ready: 0x%08x\n", reg); + return err; + } + ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, ®); if (ret) { dev_err(chip->dev, "failed to read chip revision register: %d\n", @@ -1007,15 +1036,14 @@ static const struct lan9303_mib_desc lan9303_mib[] = { static void lan9303_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) { + u8 *buf = data; unsigned int u; if (stringset != ETH_SS_STATS) return; - for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) { - strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name, - ETH_GSTRING_LEN); - } + for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) + ethtool_puts(&buf, lan9303_mib[u].name); } static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port, @@ -1048,31 +1076,31 @@ static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(lan9303_mib); } -static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum) +static int lan9303_phy_read(struct dsa_switch *ds, int port, int regnum) { struct lan9303 *chip = ds->priv; int phy_base = chip->phy_addr_base; - if (phy == phy_base) + if (port == 0) return lan9303_virt_phy_reg_read(chip, regnum); - if (phy > phy_base + 2) + if (port > 2) return -ENODEV; - return chip->ops->phy_read(chip, phy, regnum); + return chip->ops->phy_read(chip, phy_base + port, regnum); } -static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum, +static int lan9303_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) { struct lan9303 *chip = ds->priv; int phy_base = chip->phy_addr_base; - if (phy == phy_base) + if (port == 0) return lan9303_virt_phy_reg_write(chip, regnum, val); - if (phy > phy_base + 2) + if (port > 2) return -ENODEV; - return chip->ops->phy_write(chip, phy, regnum, val); + return chip->ops->phy_write(chip, phy_base + port, regnum, val); } static int lan9303_port_enable(struct dsa_switch *ds, int port, @@ -1084,7 +1112,7 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port, if (!dsa_port_is_user(dp)) return 0; - vlan_vid_add(dsa_port_to_master(dp), htons(ETH_P_8021Q), port); + vlan_vid_add(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port); return lan9303_enable_processing_port(chip, port); } @@ -1097,10 +1125,10 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port) if (!dsa_port_is_user(dp)) return; - vlan_vid_del(dsa_port_to_master(dp), htons(ETH_P_8021Q), port); + vlan_vid_del(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port); lan9303_disable_processing_port(chip, port); - lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN); + lan9303_phy_write(ds, port, MII_BMCR, BMCR_PDOWN); } static int lan9303_port_bridge_join(struct dsa_switch *ds, int port, @@ -1293,14 +1321,29 @@ static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port, } } -static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void lan9303_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ +} + +static void lan9303_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ +} + +static void lan9303_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause) { - struct lan9303 *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct lan9303 *chip = dp->ds->priv; + struct dsa_switch *ds = dp->ds; + int port = dp->index; u32 ctl; u32 reg; @@ -1330,6 +1373,12 @@ static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port, regmap_write(chip->regmap, flow_ctl_reg[port], reg); } +static const struct phylink_mac_ops lan9303_phylink_mac_ops = { + .mac_config = lan9303_phylink_mac_config, + .mac_link_down = lan9303_phylink_mac_link_down, + .mac_link_up = lan9303_phylink_mac_link_up, +}; + static const struct dsa_switch_ops lan9303_switch_ops = { .get_tag_protocol = lan9303_get_tag_protocol, .setup = lan9303_setup, @@ -1337,7 +1386,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = { .phy_read = lan9303_phy_read, .phy_write = lan9303_phy_write, .phylink_get_caps = lan9303_phylink_get_caps, - .phylink_mac_link_up = lan9303_phylink_mac_link_up, .get_ethtool_stats = lan9303_get_ethtool_stats, .get_sset_count = lan9303_get_sset_count, .port_enable = lan9303_port_enable, @@ -1355,8 +1403,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = { static int lan9303_register_switch(struct lan9303 *chip) { - int base; - chip->ds = devm_kzalloc(chip->dev, sizeof(*chip->ds), GFP_KERNEL); if (!chip->ds) return -ENOMEM; @@ -1365,8 +1411,8 @@ static int lan9303_register_switch(struct lan9303 *chip) chip->ds->num_ports = LAN9303_NUM_PORTS; chip->ds->priv = chip; chip->ds->ops = &lan9303_switch_ops; - base = chip->phy_addr_base; - chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base); + chip->ds->phylink_mac_ops = &lan9303_phylink_mac_ops; + chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1, 0); return dsa_register_switch(chip->ds); } diff --git a/drivers/net/dsa/lan9303_i2c.c b/drivers/net/dsa/lan9303_i2c.c index bbbec322bc4f..c62d27cdc117 100644 --- a/drivers/net/dsa/lan9303_i2c.c +++ b/drivers/net/dsa/lan9303_i2c.c @@ -89,7 +89,7 @@ static void lan9303_i2c_shutdown(struct i2c_client *client) /*-------------------------------------------------------------------------*/ static const struct i2c_device_id lan9303_i2c_id[] = { - { "lan9303", 0 }, + { "lan9303" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, lan9303_i2c_id); diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c index d8ab2b77d201..0ac4857e5ee8 100644 --- a/drivers/net/dsa/lan9303_mdio.c +++ b/drivers/net/dsa/lan9303_mdio.c @@ -32,7 +32,7 @@ static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val) struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; reg <<= 2; /* reg num to offset */ - mutex_lock(&sw_dev->device->bus->mdio_lock); + mutex_lock_nested(&sw_dev->device->bus->mdio_lock, MDIO_MUTEX_NESTED); lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff); lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff); mutex_unlock(&sw_dev->device->bus->mdio_lock); @@ -50,7 +50,7 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val) struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx; reg <<= 2; /* reg num to offset */ - mutex_lock(&sw_dev->device->bus->mdio_lock); + mutex_lock_nested(&sw_dev->device->bus->mdio_lock, MDIO_MUTEX_NESTED); *val = lan9303_mdio_real_read(sw_dev->device, reg); *val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16); mutex_unlock(&sw_dev->device->bus->mdio_lock); @@ -58,19 +58,19 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val) return 0; } -static int lan9303_mdio_phy_write(struct lan9303 *chip, int phy, int reg, +static int lan9303_mdio_phy_write(struct lan9303 *chip, int addr, int reg, u16 val) { struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev); - return mdiobus_write_nested(sw_dev->device->bus, phy, reg, val); + return mdiobus_write_nested(sw_dev->device->bus, addr, reg, val); } -static int lan9303_mdio_phy_read(struct lan9303 *chip, int phy, int reg) +static int lan9303_mdio_phy_read(struct lan9303 *chip, int addr, int reg) { struct lan9303_mdio *sw_dev = dev_get_drvdata(chip->dev); - return mdiobus_read_nested(sw_dev->device->bus, phy, reg); + return mdiobus_read_nested(sw_dev->device->bus, addr, reg); } static const struct lan9303_phy_ops lan9303_mdio_phy_ops = { diff --git a/drivers/net/dsa/lantiq/Kconfig b/drivers/net/dsa/lantiq/Kconfig new file mode 100644 index 000000000000..4a9771be5d58 --- /dev/null +++ b/drivers/net/dsa/lantiq/Kconfig @@ -0,0 +1,24 @@ +config NET_DSA_LANTIQ_COMMON + tristate + select REGMAP + +config NET_DSA_LANTIQ_GSWIP + tristate "Lantiq / Intel GSWIP" + depends on HAS_IOMEM + select NET_DSA_TAG_GSWIP + select NET_DSA_LANTIQ_COMMON + help + This enables support for the Lantiq / Intel GSWIP 2.1 found in + the xrx200 / VR9 SoC. + +config NET_DSA_MXL_GSW1XX + tristate "MaxLinear GSW1xx Ethernet switch support" + select NET_DSA_TAG_MXL_GSW1XX + select NET_DSA_LANTIQ_COMMON + help + This enables support for the MaxLinear GSW1xx family of 1GE switches + GSW120 4 port, 2 PHYs, RGMII & SGMII/2500Base-X + GSW125 4 port, 2 PHYs, RGMII & SGMII/2500Base-X, industrial temperature + GSW140 6 port, 4 PHYs, RGMII & SGMII/2500Base-X + GSW141 6 port, 4 PHYs, RGMII & SGMII + GSW145 6 port, 4 PHYs, RGMII & SGMII/2500Base-X, industrial temperature diff --git a/drivers/net/dsa/lantiq/Makefile b/drivers/net/dsa/lantiq/Makefile new file mode 100644 index 000000000000..85fce605310b --- /dev/null +++ b/drivers/net/dsa/lantiq/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o +obj-$(CONFIG_NET_DSA_LANTIQ_COMMON) += lantiq_gswip_common.o +obj-$(CONFIG_NET_DSA_MXL_GSW1XX) += mxl-gsw1xx.o diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.c b/drivers/net/dsa/lantiq/lantiq_gswip.c new file mode 100644 index 000000000000..57dd063c0740 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip.c @@ -0,0 +1,518 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include "lantiq_gswip.h" +#include "lantiq_pce.h" + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <dt-bindings/mips/lantiq_rcu_gphy.h> + +#include <net/dsa.h> + +struct xway_gphy_match_data { + char *fe_firmware_name; + char *ge_firmware_name; +}; + +static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + case 0: + case 1: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_MII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_REVMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + + case 2: + case 3: + case 4: + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + + case 5: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + } + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; +} + +static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + case 0: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + + case 1: + case 2: + case 3: + case 4: + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + + case 5: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + } + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; +} + +static const struct xway_gphy_match_data xrx200a1x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", +}; + +static const struct xway_gphy_match_data xrx200a2x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", +}; + +static const struct xway_gphy_match_data xrx300_gphy_data = { + .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", + .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", +}; + +static const struct of_device_id xway_gphy_match[] __maybe_unused = { + { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL }, + { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data }, + { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data }, + { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data }, + { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data }, + {}, +}; + +static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw) +{ + struct device *dev = priv->dev; + const struct firmware *fw; + void *fw_addr; + dma_addr_t dma_addr; + dma_addr_t dev_addr; + size_t size; + int ret; + + ret = clk_prepare_enable(gphy_fw->clk_gate); + if (ret) + return ret; + + reset_control_assert(gphy_fw->reset); + + /* The vendor BSP uses a 200ms delay after asserting the reset line. + * Without this some users are observing that the PHY is not coming up + * on the MDIO bus. + */ + msleep(200); + + ret = request_firmware(&fw, gphy_fw->fw_name, dev); + if (ret) + return dev_err_probe(dev, ret, "failed to load firmware: %s\n", + gphy_fw->fw_name); + + /* GPHY cores need the firmware code in a persistent and contiguous + * memory area with a 16 kB boundary aligned start address. + */ + size = fw->size + XRX200_GPHY_FW_ALIGN; + + fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); + if (fw_addr) { + fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); + dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); + memcpy(fw_addr, fw->data, fw->size); + } else { + release_firmware(fw); + return -ENOMEM; + } + + release_firmware(fw); + + ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr); + if (ret) + return ret; + + reset_control_deassert(gphy_fw->reset); + + return ret; +} + +static int gswip_gphy_fw_probe(struct gswip_priv *priv, + struct gswip_gphy_fw *gphy_fw, + struct device_node *gphy_fw_np, int i) +{ + struct device *dev = priv->dev; + u32 gphy_mode; + int ret; + char gphyname[10]; + + snprintf(gphyname, sizeof(gphyname), "gphy%d", i); + + gphy_fw->clk_gate = devm_clk_get(dev, gphyname); + if (IS_ERR(gphy_fw->clk_gate)) { + return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate), + "Failed to lookup gate clock\n"); + } + + ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset); + if (ret) + return ret; + + ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode); + /* Default to GE mode */ + if (ret) + gphy_mode = GPHY_MODE_GE; + + switch (gphy_mode) { + case GPHY_MODE_FE: + gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name; + break; + case GPHY_MODE_GE: + gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name; + break; + default: + return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n", + gphy_mode); + } + + gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np); + if (IS_ERR(gphy_fw->reset)) + return dev_err_probe(dev, PTR_ERR(gphy_fw->reset), + "Failed to lookup gphy reset\n"); + + return gswip_gphy_fw_load(priv, gphy_fw); +} + +static void gswip_gphy_fw_remove(struct gswip_priv *priv, + struct gswip_gphy_fw *gphy_fw) +{ + int ret; + + /* check if the device was fully probed */ + if (!gphy_fw->fw_name) + return; + + ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0); + if (ret) + dev_err(priv->dev, "can not reset GPHY FW pointer\n"); + + clk_disable_unprepare(gphy_fw->clk_gate); + + reset_control_put(gphy_fw->reset); +} + +static int gswip_gphy_fw_list(struct gswip_priv *priv, + struct device_node *gphy_fw_list_np, u32 version) +{ + struct device *dev = priv->dev; + struct device_node *gphy_fw_np; + const struct of_device_id *match; + int err; + int i = 0; + + /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older + * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also + * needs a different GPHY firmware. + */ + if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) { + switch (version) { + case GSWIP_VERSION_2_0: + priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data; + break; + case GSWIP_VERSION_2_1: + priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data; + break; + default: + return dev_err_probe(dev, -ENOENT, + "unknown GSWIP version: 0x%x\n", + version); + } + } + + match = of_match_node(xway_gphy_match, gphy_fw_list_np); + if (match && match->data) + priv->gphy_fw_name_cfg = match->data; + + if (!priv->gphy_fw_name_cfg) + return dev_err_probe(dev, -ENOENT, + "GPHY compatible type not supported\n"); + + priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np); + if (!priv->num_gphy_fw) + return -ENOENT; + + priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np, + "lantiq,rcu"); + if (IS_ERR(priv->rcu_regmap)) + return PTR_ERR(priv->rcu_regmap); + + priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw, + sizeof(*priv->gphy_fw), + GFP_KERNEL | __GFP_ZERO); + if (!priv->gphy_fw) + return -ENOMEM; + + for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) { + err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i], + gphy_fw_np, i); + if (err) { + of_node_put(gphy_fw_np); + goto remove_gphy; + } + i++; + } + + /* The standalone PHY11G requires 300ms to be fully + * initialized and ready for any MDIO communication after being + * taken out of reset. For the SoC-internal GPHY variant there + * is no (known) documentation for the minimum time after a + * reset. Use the same value as for the standalone variant as + * some users have reported internal PHYs not being detected + * without any delay. + */ + msleep(300); + + return 0; + +remove_gphy: + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + return err; +} + +static const struct regmap_config sw_regmap_config = { + .name = "switch", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_SDMA_PCTRLp(6), +}; + +static const struct regmap_config mdio_regmap_config = { + .name = "mdio", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_MDIO_PHYp(0), +}; + +static const struct regmap_config mii_regmap_config = { + .name = "mii", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_MII_CFGp(6), +}; + +static int gswip_probe(struct platform_device *pdev) +{ + struct device_node *np, *gphy_fw_np; + __iomem void *gswip, *mdio, *mii; + struct device *dev = &pdev->dev; + struct gswip_priv *priv; + int err; + int i; + u32 version; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + gswip = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gswip)) + return PTR_ERR(gswip); + + mdio = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(mdio)) + return PTR_ERR(mdio); + + mii = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(mii)) + return PTR_ERR(mii); + + priv->gswip = devm_regmap_init_mmio(dev, gswip, &sw_regmap_config); + if (IS_ERR(priv->gswip)) + return PTR_ERR(priv->gswip); + + priv->mdio = devm_regmap_init_mmio(dev, mdio, &mdio_regmap_config); + if (IS_ERR(priv->mdio)) + return PTR_ERR(priv->mdio); + + priv->mii = devm_regmap_init_mmio(dev, mii, &mii_regmap_config); + if (IS_ERR(priv->mii)) + return PTR_ERR(priv->mii); + + priv->hw_info = of_device_get_match_data(dev); + if (!priv->hw_info) + return -EINVAL; + + priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->dev = dev; + + regmap_read(priv->gswip, GSWIP_VERSION, &version); + + np = dev->of_node; + switch (version) { + case GSWIP_VERSION_2_0: + case GSWIP_VERSION_2_1: + if (!of_device_is_compatible(np, "lantiq,xrx200-gswip")) + return -EINVAL; + break; + case GSWIP_VERSION_2_2: + case GSWIP_VERSION_2_2_ETC: + if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") && + !of_device_is_compatible(np, "lantiq,xrx330-gswip")) + return -EINVAL; + break; + default: + return dev_err_probe(dev, -ENOENT, + "unknown GSWIP version: 0x%x\n", version); + } + + /* bring up the mdio bus */ + gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw"); + if (gphy_fw_np) { + err = gswip_gphy_fw_list(priv, gphy_fw_np, version); + of_node_put(gphy_fw_np); + if (err) + return dev_err_probe(dev, err, + "gphy fw probe failed\n"); + } + + err = gswip_probe_common(priv, version); + if (err) + goto gphy_fw_remove; + + platform_set_drvdata(pdev, priv); + + return 0; + +gphy_fw_remove: + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + return err; +} + +static void gswip_remove(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + int i; + + if (!priv) + return; + + /* disable the switch */ + gswip_disable_switch(priv); + + dsa_unregister_switch(priv->ds); + + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); +} + +static void gswip_shutdown(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + platform_set_drvdata(pdev, NULL); +} + +static const struct gswip_hw_info gswip_xrx200 = { + .max_ports = 7, + .allowed_cpu_ports = BIT(6), + .mii_ports = BIT(0) | BIT(1) | BIT(5), + .mii_port_reg_offset = 0, + .phylink_get_caps = gswip_xrx200_phylink_get_caps, + .pce_microcode = &gswip_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_GSWIP, +}; + +static const struct gswip_hw_info gswip_xrx300 = { + .max_ports = 7, + .allowed_cpu_ports = BIT(6), + .mii_ports = BIT(0) | BIT(5), + .mii_port_reg_offset = 0, + .phylink_get_caps = gswip_xrx300_phylink_get_caps, + .pce_microcode = &gswip_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_GSWIP, +}; + +static const struct of_device_id gswip_of_match[] = { + { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, + { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, + { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, + {}, +}; +MODULE_DEVICE_TABLE(of, gswip_of_match); + +static struct platform_driver gswip_driver = { + .probe = gswip_probe, + .remove = gswip_remove, + .shutdown = gswip_shutdown, + .driver = { + .name = "gswip", + .of_match_table = gswip_of_match, + }, +}; + +module_platform_driver(gswip_driver); + +MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.h b/drivers/net/dsa/lantiq/lantiq_gswip.h new file mode 100644 index 000000000000..9c38e51a75e8 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip.h @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifndef __LANTIQ_GSWIP_H +#define __LANTIQ_GSWIP_H + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/phylink.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/swab.h> +#include <net/dsa.h> + +/* GSWIP MDIO Registers */ +#define GSWIP_MDIO_GLOB 0x00 +#define GSWIP_MDIO_GLOB_ENABLE BIT(15) +#define GSWIP_MDIO_CTRL 0x08 +#define GSWIP_MDIO_CTRL_BUSY BIT(12) +#define GSWIP_MDIO_CTRL_RD BIT(11) +#define GSWIP_MDIO_CTRL_WR BIT(10) +#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f +#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5 +#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f +#define GSWIP_MDIO_READ 0x09 +#define GSWIP_MDIO_WRITE 0x0A +#define GSWIP_MDIO_MDC_CFG0 0x0B +#define GSWIP_MDIO_MDC_CFG1 0x0C +#define GSWIP_MDIO_PHYp(p) (0x15 - (p)) +#define GSWIP_MDIO_PHY_LINK_MASK 0x6000 +#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000 +#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000 +#define GSWIP_MDIO_PHY_LINK_UP 0x2000 +#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800 +#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800 +#define GSWIP_MDIO_PHY_SPEED_M10 0x0000 +#define GSWIP_MDIO_PHY_SPEED_M100 0x0800 +#define GSWIP_MDIO_PHY_SPEED_G1 0x1000 +#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600 +#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FDUP_EN 0x0200 +#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600 +#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180 +#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100 +#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180 +#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060 +#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020 +#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060 +#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f +#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \ + GSWIP_MDIO_PHY_FCONRX_MASK | \ + GSWIP_MDIO_PHY_FCONTX_MASK | \ + GSWIP_MDIO_PHY_LINK_MASK | \ + GSWIP_MDIO_PHY_SPEED_MASK | \ + GSWIP_MDIO_PHY_FDUP_MASK) + +/* GSWIP MII Registers */ +#define GSWIP_MII_CFGp(p) (0x2 * (p)) +#define GSWIP_MII_CFG_RESET BIT(15) +#define GSWIP_MII_CFG_EN BIT(14) +#define GSWIP_MII_CFG_ISOLATE BIT(13) +#define GSWIP_MII_CFG_LDCLKDIS BIT(12) +#define GSWIP_MII_CFG_RGMII_IBS BIT(8) +#define GSWIP_MII_CFG_RMII_CLK BIT(7) +#define GSWIP_MII_CFG_MODE_MIIP 0x0 +#define GSWIP_MII_CFG_MODE_MIIM 0x1 +#define GSWIP_MII_CFG_MODE_RMIIP 0x2 +#define GSWIP_MII_CFG_MODE_RMIIM 0x3 +#define GSWIP_MII_CFG_MODE_RGMII 0x4 +#define GSWIP_MII_CFG_MODE_GMII 0x9 +#define GSWIP_MII_CFG_MODE_MASK 0xf +#define GSWIP_MII_CFG_RATE_M2P5 0x00 +#define GSWIP_MII_CFG_RATE_M25 0x10 +#define GSWIP_MII_CFG_RATE_M125 0x20 +#define GSWIP_MII_CFG_RATE_M50 0x30 +#define GSWIP_MII_CFG_RATE_AUTO 0x40 +#define GSWIP_MII_CFG_RATE_MASK 0x70 +#define GSWIP_MII_PCDU0 0x01 +#define GSWIP_MII_PCDU1 0x03 +#define GSWIP_MII_PCDU5 0x05 +#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0) +#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7) +#define GSWIP_MII_PCDU_TXDLY(x) u16_encode_bits(((x) / 500), GSWIP_MII_PCDU_TXDLY_MASK) +#define GSWIP_MII_PCDU_RXDLY(x) u16_encode_bits(((x) / 500), GSWIP_MII_PCDU_RXDLY_MASK) +#define GSWIP_MII_PCDU_RXDLY_DEFAULT 2000 /* picoseconds */ +#define GSWIP_MII_PCDU_TXDLY_DEFAULT 2000 /* picoseconds */ + +/* GSWIP Core Registers */ +#define GSWIP_SWRES 0x000 +#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */ +#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */ +#define GSWIP_VERSION 0x013 +#define GSWIP_VERSION_REV_MASK GENMASK(7, 0) +#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8) +#define GSWIP_VERSION_REV(v) FIELD_GET(GSWIP_VERSION_REV_MASK, v) +#define GSWIP_VERSION_MOD(v) FIELD_GET(GSWIP_VERSION_MOD_MASK, v) +#define GSWIP_VERSION_2_0 0x100 +#define GSWIP_VERSION_2_1 0x021 +#define GSWIP_VERSION_2_2 0x122 +#define GSWIP_VERSION_2_2_ETC 0x022 +/* The hardware has the 'major/minor' version bytes in the wrong order + * preventing numerical comparisons. Swap the bytes of the 16-bit value + * to end up with REV being the most significant byte and MOD being the + * least significant byte, which then allows comparing it with the + * value stored in struct gswip_priv. + */ +#define GSWIP_VERSION_GE(priv, ver) ((priv)->version >= swab16(ver)) + +#define GSWIP_BM_RAM_VAL(x) (0x043 - (x)) +#define GSWIP_BM_RAM_ADDR 0x044 +#define GSWIP_BM_RAM_CTRL 0x045 +#define GSWIP_BM_RAM_CTRL_BAS BIT(15) +#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5) +#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0) +#define GSWIP_BM_QUEUE_GCTRL 0x04A +#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10) +/* buffer management Port Configuration Register */ +#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2)) +#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */ +#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */ +/* buffer management Port Control Register */ +#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2)) +#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */ +#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */ + +/* PCE */ +#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x)) +#define GSWIP_PCE_TBL_MASK 0x448 +#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x)) +#define GSWIP_PCE_TBL_ADDR 0x44E +#define GSWIP_PCE_TBL_CTRL 0x44F +#define GSWIP_PCE_TBL_CTRL_BAS BIT(15) +#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13) +#define GSWIP_PCE_TBL_CTRL_VLD BIT(12) +#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11) +#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7) +#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5) +#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00 +#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20 +#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40 +#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60 +#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0) +#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */ +#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */ +#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */ +#define GSWIP_PCE_GCTRL_0 0x456 +#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */ +#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3) +#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */ +#define GSWIP_PCE_GCTRL_1 0x457 +#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */ +#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */ +#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA)) +#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */ +#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */ +#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */ +#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0 +#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1 +#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2 +#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3 +#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7 +#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0) +/* Ethernet Switch PCE Port Control Register 3 */ +#define GSWIP_PCE_PCTRL_3p(p) (0x483 + ((p) * 0xA)) +#define GSWIP_PCE_PCTRL_3_LNDIS BIT(15) /* Learning Disable */ +#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA)) +#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */ +#define GSWIP_PCE_VCTRL_VINR GENMASK(2, 1) /* VLAN Ingress Tag Rule */ +#define GSWIP_PCE_VCTRL_VINR_ALL 0 /* Admit tagged and untagged packets */ +#define GSWIP_PCE_VCTRL_VINR_TAGGED 1 /* Admit only tagged packets */ +#define GSWIP_PCE_VCTRL_VINR_UNTAGGED 2 /* Admit only untagged packets */ +#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */ +#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */ +#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */ +#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */ +#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) + +#define GSWIP_MAC_FLEN 0x8C5 +#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_0_PADEN BIT(8) +#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) +#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 +#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 +#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 +#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 +#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 +#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C +#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 +#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C +#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 +#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 +#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 +#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ +#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ +#define GSWIP_MAC_CTRL_4p(p) (0x907 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_4_LPIEN BIT(7) /* LPI Mode Enable */ +#define GSWIP_MAC_CTRL_4_GWAIT_MASK GENMASK(14, 8) /* LPI Wait Time 1G */ +#define GSWIP_MAC_CTRL_4_GWAIT(t) u16_encode_bits((t), GSWIP_MAC_CTRL_4_GWAIT_MASK) +#define GSWIP_MAC_CTRL_4_WAIT_MASK GENMASK(6, 0) /* LPI Wait Time 100M */ +#define GSWIP_MAC_CTRL_4_WAIT(t) u16_encode_bits((t), GSWIP_MAC_CTRL_4_WAIT_MASK) + +/* Ethernet Switch Fetch DMA Port Control Register */ +#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6)) +#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */ +#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */ +#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */ +#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */ +#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) + +/* Ethernet Switch Store DMA Port Control Register */ +#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) +#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ +#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ +#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ + +#define GSWIP_TABLE_ACTIVE_VLAN 0x01 +#define GSWIP_TABLE_VLAN_MAPPING 0x02 +#define GSWIP_TABLE_MAC_BRIDGE 0x0b +#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID BIT(1) /* Valid bit */ + +#define XRX200_GPHY_FW_ALIGN (16 * 1024) + +/* Maximum packet size supported by the switch. In theory this should be 10240, + * but long packets currently cause lock-ups with an MTU of over 2526. Medium + * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP + * over 2526), hence an MTU value of 2400 seems safe. This issue only affects + * packet reception. This is probably caused by the PPA engine, which is on the + * RX part of the device. Packet transmission works properly up to 10240. + */ +#define GSWIP_MAX_PACKET_LENGTH 2400 + +#define GSWIP_VLAN_UNAWARE_PVID 0 + +struct gswip_pce_microcode { + u16 val_3; + u16 val_2; + u16 val_1; + u16 val_0; +}; + +struct gswip_hw_info { + int max_ports; + unsigned int allowed_cpu_ports; + unsigned int mii_ports; + int mii_port_reg_offset; + bool supports_2500m; + const struct gswip_pce_microcode (*pce_microcode)[]; + size_t pce_microcode_size; + enum dsa_tag_protocol tag_protocol; + void (*phylink_get_caps)(struct dsa_switch *ds, int port, + struct phylink_config *config); + struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config, + phy_interface_t interface); +}; + +struct gswip_gphy_fw { + struct clk *clk_gate; + struct reset_control *reset; + u32 fw_addr_offset; + char *fw_name; +}; + +struct gswip_vlan { + struct net_device *bridge; + u16 vid; + u8 fid; +}; + +struct gswip_priv { + struct regmap *gswip; + struct regmap *mdio; + struct regmap *mii; + const struct gswip_hw_info *hw_info; + const struct xway_gphy_match_data *gphy_fw_name_cfg; + struct dsa_switch *ds; + struct device *dev; + struct regmap *rcu_regmap; + struct gswip_vlan vlans[64]; + int num_gphy_fw; + struct gswip_gphy_fw *gphy_fw; + struct mutex pce_table_lock; + u16 version; +}; + +void gswip_disable_switch(struct gswip_priv *priv); + +int gswip_probe_common(struct gswip_priv *priv, u32 version); + +#endif /* __LANTIQ_GSWIP_H */ diff --git a/drivers/net/dsa/lantiq/lantiq_gswip_common.c b/drivers/net/dsa/lantiq/lantiq_gswip_common.c new file mode 100644 index 000000000000..9da39edf8f57 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip_common.c @@ -0,0 +1,1739 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lantiq / Intel / MaxLinear GSWIP common function library + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + * + * The VLAN and bridge model the GSWIP hardware uses does not directly + * matches the model DSA uses. + * + * The hardware has 64 possible table entries for bridges with one VLAN + * ID, one flow id and a list of ports for each bridge. All entries which + * match the same flow ID are combined in the mac learning table, they + * act as one global bridge. + * The hardware does not support VLAN filter on the port, but on the + * bridge, this driver converts the DSA model to the hardware. + * + * The CPU gets all the exception frames which do not match any forwarding + * rule and the CPU port is also added to all bridges. This makes it possible + * to handle all the special cases easily in software. + * At the initialization the driver allocates one bridge table entry for + * each switch port which is used when the port is used without an + * explicit bridge. This prevents the frames from being forwarded + * between all LAN ports by default. + */ + +#include "lantiq_gswip.h" + +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/phylink.h> +#include <linux/regmap.h> +#include <net/dsa.h> + +struct gswip_pce_table_entry { + u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index + u16 table; // PCE_TBL_CTRL.ADDR = pData->table + u16 key[8]; + u16 val[5]; + u16 mask; + u8 gmap; + bool type; + bool valid; + bool key_mode; +}; + +struct gswip_rmon_cnt_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} + +static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { + /** Receive Packet Count (only packets that are accepted and not discarded). */ + MIB_DESC(1, 0x1F, "RxGoodPkts"), + MIB_DESC(1, 0x23, "RxUnicastPkts"), + MIB_DESC(1, 0x22, "RxMulticastPkts"), + MIB_DESC(1, 0x21, "RxFCSErrorPkts"), + MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), + MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), + MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), + MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), + MIB_DESC(1, 0x20, "RxGoodPausePkts"), + MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), + MIB_DESC(1, 0x12, "Rx64BytePkts"), + MIB_DESC(1, 0x13, "Rx127BytePkts"), + MIB_DESC(1, 0x14, "Rx255BytePkts"), + MIB_DESC(1, 0x15, "Rx511BytePkts"), + MIB_DESC(1, 0x16, "Rx1023BytePkts"), + /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x17, "RxMaxBytePkts"), + MIB_DESC(1, 0x18, "RxDroppedPkts"), + MIB_DESC(1, 0x19, "RxFilteredPkts"), + MIB_DESC(2, 0x24, "RxGoodBytes"), + MIB_DESC(2, 0x26, "RxBadBytes"), + MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), + MIB_DESC(1, 0x0C, "TxGoodPkts"), + MIB_DESC(1, 0x06, "TxUnicastPkts"), + MIB_DESC(1, 0x07, "TxMulticastPkts"), + MIB_DESC(1, 0x00, "Tx64BytePkts"), + MIB_DESC(1, 0x01, "Tx127BytePkts"), + MIB_DESC(1, 0x02, "Tx255BytePkts"), + MIB_DESC(1, 0x03, "Tx511BytePkts"), + MIB_DESC(1, 0x04, "Tx1023BytePkts"), + /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x05, "TxMaxBytePkts"), + MIB_DESC(1, 0x08, "TxSingleCollCount"), + MIB_DESC(1, 0x09, "TxMultCollCount"), + MIB_DESC(1, 0x0A, "TxLateCollCount"), + MIB_DESC(1, 0x0B, "TxExcessCollCount"), + MIB_DESC(1, 0x0D, "TxPauseCount"), + MIB_DESC(1, 0x10, "TxDroppedPkts"), + MIB_DESC(2, 0x0E, "TxGoodBytes"), +}; + +static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, + u32 cleared) +{ + u32 val; + + return regmap_read_poll_timeout(priv->gswip, offset, val, + !(val & cleared), 20, 50000); +} + +static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set, + int port) +{ + int reg_port; + + /* MII_CFG register only exists for MII ports */ + if (!(priv->hw_info->mii_ports & BIT(port))) + return; + + reg_port = port + priv->hw_info->mii_port_reg_offset; + + regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask, + set); +} + +static int gswip_mdio_poll(struct gswip_priv *priv) +{ + u32 ctrl; + + return regmap_read_poll_timeout(priv->mdio, GSWIP_MDIO_CTRL, ctrl, + !(ctrl & GSWIP_MDIO_CTRL_BUSY), 40, 4000); +} + +static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct gswip_priv *priv = bus->priv; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_WRITE, val); + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + return 0; +} + +static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) +{ + struct gswip_priv *priv = bus->priv; + u32 val; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + err = regmap_read(priv->mdio, GSWIP_MDIO_READ, &val); + if (err) + return err; + + return val; +} + +static int gswip_mdio(struct gswip_priv *priv) +{ + struct device_node *mdio_np, *switch_np = priv->dev->of_node; + struct device *dev = priv->dev; + struct mii_bus *bus; + int err = 0; + + mdio_np = of_get_compatible_child(switch_np, "lantiq,xrx200-mdio"); + if (!mdio_np) + mdio_np = of_get_child_by_name(switch_np, "mdio"); + + if (!of_device_is_available(mdio_np)) + goto out_put_node; + + bus = devm_mdiobus_alloc(dev); + if (!bus) { + err = -ENOMEM; + goto out_put_node; + } + + bus->priv = priv; + bus->read = gswip_mdio_rd; + bus->write = gswip_mdio_wr; + bus->name = "lantiq,xrx200-mdio"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + err = devm_of_mdiobus_register(dev, bus, mdio_np); + +out_put_node: + of_node_put(mdio_np); + + return err; +} + +static int gswip_pce_table_entry_read(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u32 tmp; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : + GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_BAS, + tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_KEY(i), &tmp); + if (err) + goto out_unlock; + tbl->key[i] = tmp; + } + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_VAL(i), &tmp); + if (err) + goto out_unlock; + tbl->val[i] = tmp; + } + + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_MASK, &tmp); + if (err) + goto out_unlock; + + tbl->mask = tmp; + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + if (err) + goto out_unlock; + + tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); + tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); + tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; + +out_unlock: + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +static int gswip_pce_table_entry_write(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) { + mutex_unlock(&priv->pce_table_lock); + return err; + } + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_KEY(i), tbl->key[i]); + + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(i), tbl->val[i]); + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, tbl->mask); + + regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | + GSWIP_PCE_TBL_CTRL_GMAP_MASK); + if (tbl->type) + crtl |= GSWIP_PCE_TBL_CTRL_TYPE; + if (tbl->valid) + crtl |= GSWIP_PCE_TBL_CTRL_VLD; + crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; + crtl |= GSWIP_PCE_TBL_CTRL_BAS; + regmap_write(priv->gswip, GSWIP_PCE_TBL_CTRL, crtl); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +/* Add the LAN port into a bridge with the CPU port by + * default. This prevents automatic forwarding of + * packages between the LAN ports when no explicit + * bridge is configured. + */ +static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + struct gswip_pce_table_entry vlan_mapping = {0,}; + int err; + + vlan_active.index = port + 1; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_active.val[0] = port + 1 /* fid */; + vlan_active.valid = add; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + if (!add) + return 0; + + vlan_mapping.index = port + 1; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + vlan_mapping.val[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_mapping.val[1] = BIT(port) | dsa_cpu_ports(priv->ds); + vlan_mapping.val[2] = 0; + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + return 0; +} + +static int gswip_port_set_learning(struct gswip_priv *priv, int port, + bool enable) +{ + if (!GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + return -EOPNOTSUPP; + + /* learning disable bit */ + return regmap_update_bits(priv->gswip, GSWIP_PCE_PCTRL_3p(port), + GSWIP_PCE_PCTRL_3_LNDIS, + enable ? 0 : GSWIP_PCE_PCTRL_3_LNDIS); +} + +static int gswip_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + unsigned long supported = 0; + + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + supported |= BR_LEARNING; + + if (flags.mask & ~supported) + return -EINVAL; + + return 0; +} + +static int gswip_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + + if (flags.mask & BR_LEARNING) + return gswip_port_set_learning(priv, port, + !!(flags.val & BR_LEARNING)); + + return 0; +} + +static int gswip_port_setup(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + int err; + + if (!dsa_is_cpu_port(ds, port)) { + err = gswip_add_single_port_br(priv, port, true); + if (err) + return err; + } + + return 0; +} + +static int gswip_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct gswip_priv *priv = ds->priv; + + if (!dsa_is_cpu_port(ds, port)) { + u32 mdio_phy = 0; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_ADDR_MASK, + mdio_phy); + } + + /* RMON Counter Enable for port */ + regmap_write(priv->gswip, GSWIP_BM_PCFGp(port), GSWIP_BM_PCFG_CNTEN); + + /* enable port fetch/store dma & VLAN Modification */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN | GSWIP_FDMA_PCTRL_VLANMOD_BOTH); + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + + return 0; +} + +static void gswip_port_disable(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + + regmap_clear_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN); + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); +} + +static int gswip_pce_load_microcode(struct gswip_priv *priv) +{ + int i; + int err; + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR); + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, 0); + + for (i = 0; i < priv->hw_info->pce_microcode_size; i++) { + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, i); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(0), + (*priv->hw_info->pce_microcode)[i].val_0); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(1), + (*priv->hw_info->pce_microcode)[i].val_1); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(2), + (*priv->hw_info->pce_microcode)[i].val_2); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(3), + (*priv->hw_info->pce_microcode)[i].val_3); + + /* start the table access: */ + regmap_set_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + return err; + } + + /* tell the switch that the microcode is loaded */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MC_VALID); + + return 0; +} + +static void gswip_port_commit_pvid(struct gswip_priv *priv, int port) +{ + struct dsa_port *dp = dsa_to_port(priv->ds, port); + struct net_device *br = dsa_port_bridge_dev_get(dp); + u32 vinr; + int idx; + + if (!dsa_port_is_user(dp)) + return; + + if (br) { + u16 pvid = GSWIP_VLAN_UNAWARE_PVID; + + if (br_vlan_enabled(br)) + br_vlan_get_pvid(br, &pvid); + + /* VLAN-aware bridge ports with no PVID will use Active VLAN + * index 0. The expectation is that this drops all untagged and + * VID-0 tagged ingress traffic. + */ + idx = 0; + for (int i = priv->hw_info->max_ports; + i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == br && + priv->vlans[i].vid == pvid) { + idx = i; + break; + } + } + } else { + /* The Active VLAN table index as configured by + * gswip_add_single_port_br() + */ + idx = port + 1; + } + + vinr = idx ? GSWIP_PCE_VCTRL_VINR_ALL : GSWIP_PCE_VCTRL_VINR_TAGGED; + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VINR, + FIELD_PREP(GSWIP_PCE_VCTRL_VINR, vinr)); + + /* Note that in GSWIP 2.2 VLAN mode the VID needs to be programmed + * directly instead of referencing the index in the Active VLAN Tablet. + * However, without the VLANMD bit (9) in PCE_GCTRL_1 (0x457) even + * GSWIP 2.2 and newer hardware maintain the GSWIP 2.1 behavior. + */ + regmap_write(priv->gswip, GSWIP_PCE_DEFPVID(port), idx); +} + +static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + + if (vlan_filtering) { + /* Use tag based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VSR | + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0, + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0); + regmap_clear_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } else { + /* Use port based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0 | + GSWIP_PCE_VCTRL_VSR, + GSWIP_PCE_VCTRL_VSR); + regmap_set_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp, + phy_interface_t interface) +{ + u32 tx_delay = GSWIP_MII_PCDU_TXDLY_DEFAULT; + u32 rx_delay = GSWIP_MII_PCDU_RXDLY_DEFAULT; + struct device_node *port_dn = dp->dn; + u16 mii_pcdu_reg; + + /* As MII_PCDU registers only exist for MII ports, silently return + * unless the port is an MII port + */ + if (!(priv->hw_info->mii_ports & BIT(dp->index))) + return; + + switch (dp->index + priv->hw_info->mii_port_reg_offset) { + case 0: + mii_pcdu_reg = GSWIP_MII_PCDU0; + break; + case 1: + mii_pcdu_reg = GSWIP_MII_PCDU1; + break; + case 5: + mii_pcdu_reg = GSWIP_MII_PCDU5; + break; + default: + return; + } + + /* legacy code to set default delays according to the interface mode */ + switch (interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + tx_delay = 0; + rx_delay = 0; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + rx_delay = 0; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + tx_delay = 0; + break; + default: + break; + } + + /* allow settings delays using device tree properties */ + of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay); + of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay); + + regmap_write_bits(priv->mii, mii_pcdu_reg, + GSWIP_MII_PCDU_TXDLY_MASK | + GSWIP_MII_PCDU_RXDLY_MASK, + GSWIP_MII_PCDU_TXDLY(tx_delay) | + GSWIP_MII_PCDU_RXDLY(rx_delay)); +} + +static int gswip_setup(struct dsa_switch *ds) +{ + unsigned int cpu_ports = dsa_cpu_ports(ds); + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int err, i; + + regmap_write(priv->gswip, GSWIP_SWRES, GSWIP_SWRES_R0); + usleep_range(5000, 10000); + regmap_write(priv->gswip, GSWIP_SWRES, 0); + + /* disable port fetch/store dma on all ports */ + for (i = 0; i < priv->hw_info->max_ports; i++) { + gswip_port_disable(ds, i); + gswip_port_vlan_filtering(ds, i, false, NULL); + } + + /* enable Switch */ + regmap_set_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); + + err = gswip_pce_load_microcode(priv); + if (err) { + dev_err(priv->dev, "writing PCE microcode failed, %i\n", err); + return err; + } + + /* Default unknown Broadcast/Multicast/Unicast port maps */ + regmap_write(priv->gswip, GSWIP_PCE_PMAP1, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP2, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP3, cpu_ports); + + /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an + * interoperability problem with this auto polling mechanism because + * their status registers think that the link is in a different state + * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set + * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the + * auto polling state machine consider the link being negotiated with + * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads + * to the switch port being completely dead (RX and TX are both not + * working). + * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F + * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes + * it would work fine for a few minutes to hours and then stop, on + * other device it would no traffic could be sent or received at all. + * Testing shows that when PHY auto polling is disabled these problems + * go away. + */ + regmap_write(priv->mdio, GSWIP_MDIO_MDC_CFG0, 0x0); + + /* Configure the MDIO Clock 2.5 MHz */ + regmap_write_bits(priv->mdio, GSWIP_MDIO_MDC_CFG1, 0xff, 0x09); + + /* bring up the mdio bus */ + err = gswip_mdio(priv); + if (err) { + dev_err(priv->dev, "mdio bus setup failed\n"); + return err; + } + + /* Disable the xMII interface and clear it's isolation bit */ + for (i = 0; i < priv->hw_info->max_ports; i++) + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, + 0, i); + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + /* enable special tag insertion on cpu port */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(cpu_dp->index), + GSWIP_FDMA_PCTRL_STEN); + + /* accept special tag in ingress direction */ + regmap_set_bits(priv->gswip, + GSWIP_PCE_PCTRL_0p(cpu_dp->index), + GSWIP_PCE_PCTRL_0_INGRESS); + } + + regmap_set_bits(priv->gswip, GSWIP_BM_QUEUE_GCTRL, + GSWIP_BM_QUEUE_GCTRL_GL_MOD); + + /* VLAN aware Switching */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_VLAN); + + /* Flush MAC Table */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + if (err) { + dev_err(priv->dev, "MAC flushing didn't finish\n"); + return err; + } + + ds->mtu_enforcement_ingress = true; + + return 0; +} + +static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + struct gswip_priv *priv = ds->priv; + + return priv->hw_info->tag_protocol; +} + +static int gswip_vlan_active_create(struct gswip_priv *priv, + struct net_device *bridge, + int fid, u16 vid) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int err; + int i; + + /* Look for a free slot */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (!priv->vlans[i].bridge) { + idx = i; + break; + } + } + + if (idx == -1) + return -ENOSPC; + + if (fid == -1) + fid = idx; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = vid; + vlan_active.val[0] = fid; + vlan_active.valid = true; + + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + priv->vlans[idx].bridge = bridge; + priv->vlans[idx].vid = vid; + priv->vlans[idx].fid = fid; + + return idx; +} + +static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + int err; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.valid = false; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) + dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); + priv->vlans[idx].bridge = NULL; + + return err; +} + +static int gswip_vlan_add(struct gswip_priv *priv, struct net_device *bridge, + int port, u16 vid, bool untagged, bool pvid, + bool vlan_aware) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + unsigned int cpu_ports = dsa_cpu_ports(priv->ds); + bool active_vlan_created = false; + int fid = -1, idx = -1; + int i, err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + if (vlan_aware) { + if (fid != -1 && fid != priv->vlans[i].fid) + dev_err(priv->dev, "one bridge with multiple flow ids\n"); + fid = priv->vlans[i].fid; + } + if (priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + } + + /* If this bridge is not programmed yet, add a Active VLAN table + * entry in a free slot and prepare the VLAN mapping table entry. + */ + if (idx == -1) { + idx = gswip_vlan_active_create(priv, bridge, fid, vid); + if (idx < 0) + return idx; + active_vlan_created = true; + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + } else { + /* Read the existing VLAN mapping entry from the switch */ + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", + err); + return err; + } + } + + /* VLAN ID byte, maps to the VLAN ID of vlan active table */ + vlan_mapping.val[0] = vid; + /* Update the VLAN mapping entry and write it to the switch */ + vlan_mapping.val[1] |= cpu_ports; + vlan_mapping.val[1] |= BIT(port); + if (vlan_aware) + vlan_mapping.val[2] |= cpu_ports; + if (untagged) + vlan_mapping.val[2] &= ~BIT(port); + else + vlan_mapping.val[2] |= BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + /* In case an Active VLAN was creaetd delete it again */ + if (active_vlan_created) + gswip_vlan_active_remove(priv, idx); + return err; + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_vlan_remove(struct gswip_priv *priv, + struct net_device *bridge, int port, + u16 vid) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int i; + int err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + + if (idx == -1) { + dev_err(priv->dev, "Port %d cannot find VID %u of bridge %s\n", + port, vid, bridge ? bridge->name : "(null)"); + return -ENOENT; + } + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); + return err; + } + + vlan_mapping.val[1] &= ~BIT(port); + vlan_mapping.val[2] &= ~BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + /* In case all ports are removed from the bridge, remove the VLAN */ + if (!(vlan_mapping.val[1] & ~dsa_cpu_ports(priv->ds))) { + err = gswip_vlan_active_remove(priv, idx); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", + err); + return err; + } + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + int err; + + /* Set up the VLAN for VLAN-unaware bridging for this port, and remove + * it from the "single-port bridge" through which it was operating as + * standalone. + */ + err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, + true, true, false); + if (err) + return err; + + return gswip_add_single_port_br(priv, port, false); +} + +static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + + /* Add the port back to the "single-port bridge", and remove it from + * the VLAN-unaware PVID created for this bridge. + */ + gswip_add_single_port_br(priv, port, true); + gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID); +} + +static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + unsigned int max_ports = priv->hw_info->max_ports; + int pos = max_ports; + int i, idx = -1; + + /* We only support VLAN filtering on bridges */ + if (!dsa_is_cpu_port(ds, port) && !bridge) + return -EOPNOTSUPP; + + /* Check if there is already a page for this VLAN */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vlan->vid) { + idx = i; + break; + } + } + + /* If this VLAN is not programmed yet, we have to reserve + * one entry in the VLAN table. Make sure we start at the + * next position round. + */ + if (idx == -1) { + /* Look for a free slot */ + for (; pos < ARRAY_SIZE(priv->vlans); pos++) { + if (!priv->vlans[pos].bridge) { + idx = pos; + pos++; + break; + } + } + + if (idx == -1) { + NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); + return -ENOSPC; + } + } + + return 0; +} + +static int gswip_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + int err; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + err = gswip_port_vlan_prepare(ds, port, vlan, extack); + if (err) + return err; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_add(priv, bridge, port, vlan->vid, untagged, pvid, + true); +} + +static int gswip_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_remove(priv, bridge, port, vlan->vid); +} + +static void gswip_port_fast_age(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to read mac bridge: %d\n", + err); + return; + } + + if (!mac_bridge.valid) + continue; + + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) + continue; + + if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) + continue; + + mac_bridge.valid = false; + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to write mac bridge: %d\n", + err); + return; + } + } +} + +static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct gswip_priv *priv = ds->priv; + u32 stp_state; + + switch (state) { + case BR_STATE_DISABLED: + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + return; + case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; + break; + case BR_STATE_LEARNING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; + break; + case BR_STATE_FORWARDING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; + break; + default: + dev_err(priv->dev, "invalid STP state: %d\n", state); + return; + } + + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + regmap_write_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_PSTATE_MASK, + stp_state); +} + +static int gswip_port_fdb(struct dsa_switch *ds, int port, + struct net_device *bridge, const unsigned char *addr, + u16 vid, bool add) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int fid = -1; + int i; + int err; + + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + fid = priv->vlans[i].fid; + break; + } + } + + if (fid == -1) { + dev_err(priv->dev, "no FID found for bridge %s\n", + bridge->name); + return -EINVAL; + } + + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.key_mode = true; + mac_bridge.key[0] = addr[5] | (addr[4] << 8); + mac_bridge.key[1] = addr[3] | (addr[2] << 8); + mac_bridge.key[2] = addr[1] | (addr[0] << 8); + mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid); + mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2_ETC)) + mac_bridge.val[1] = add ? (GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC | + GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID) : 0; + else + mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC; + + mac_bridge.valid = add; + + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) + dev_err(priv->dev, "failed to write mac bridge: %d\n", err); + + return err; +} + +static int gswip_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, true); +} + +static int gswip_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, false); +} + +static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned char addr[ETH_ALEN]; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, + "failed to read mac bridge entry %d: %d\n", + i, err); + return err; + } + + if (!mac_bridge.valid) + continue; + + addr[5] = mac_bridge.key[0] & 0xff; + addr[4] = (mac_bridge.key[0] >> 8) & 0xff; + addr[3] = mac_bridge.key[1] & 0xff; + addr[2] = (mac_bridge.key[1] >> 8) & 0xff; + addr[1] = mac_bridge.key[2] & 0xff; + addr[0] = (mac_bridge.key[2] >> 8) & 0xff; + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) { + if (mac_bridge.val[0] & BIT(port)) { + err = cb(addr, 0, true, data); + if (err) + return err; + } + } else { + if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) { + err = cb(addr, 0, false, data); + if (err) + return err; + } + } + } + return 0; +} + +static int gswip_port_max_mtu(struct dsa_switch *ds, int port) +{ + /* Includes 8 bytes for special header. */ + return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; +} + +static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct gswip_priv *priv = ds->priv; + + /* CPU port always has maximum mtu of user ports, so use it to set + * switch frame size, including 8 byte special header. + */ + if (dsa_is_cpu_port(ds, port)) { + new_mtu += 8; + regmap_write(priv->gswip, GSWIP_MAC_FLEN, + VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN); + } + + /* Enable MLEN for ports with non-standard MTUs, including the special + * header on the CPU port added above. + */ + if (new_mtu != ETH_DATA_LEN) + regmap_set_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + else + regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + + return 0; +} + +static void gswip_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct gswip_priv *priv = ds->priv; + + priv->hw_info->phylink_get_caps(ds, port, config); +} + +static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +{ + u32 mdio_phy; + + if (link) + mdio_phy = GSWIP_MDIO_PHY_LINK_UP; + else + mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_LINK_MASK, mdio_phy); +} + +static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, + phy_interface_t interface) +{ + u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; + + switch (speed) { + case SPEED_10: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M2P5; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_100: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M25; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_1000: + mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; + + mii_cfg = GSWIP_MII_CFG_RATE_M125; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; + break; + } + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy); + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0); +} + +static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) +{ + u32 mac_ctrl_0, mdio_phy; + + if (duplex == DUPLEX_FULL) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; + mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; + mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy); +} + +static void gswip_port_set_pause(struct gswip_priv *priv, int port, + bool tx_pause, bool rx_pause) +{ + u32 mac_ctrl_0, mdio_phy; + + if (tx_pause && rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_EN; + } else if (tx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_DIS; + } else if (rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FCON_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FCONTX_MASK | GSWIP_MDIO_PHY_FCONRX_MASK, + mdio_phy); +} + +static void gswip_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + u32 miicfg = 0; + + miicfg |= GSWIP_MII_CFG_LDCLKDIS; + + switch (state->interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + return; + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_INTERNAL: + miicfg |= GSWIP_MII_CFG_MODE_MIIM; + break; + case PHY_INTERFACE_MODE_REVMII: + miicfg |= GSWIP_MII_CFG_MODE_MIIP; + break; + case PHY_INTERFACE_MODE_RMII: + miicfg |= GSWIP_MII_CFG_MODE_RMIIM; + if (of_property_read_bool(dp->dn, "maxlinear,rmii-refclk-out")) + miicfg |= GSWIP_MII_CFG_RMII_CLK; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; + case PHY_INTERFACE_MODE_GMII: + miicfg |= GSWIP_MII_CFG_MODE_GMII; + break; + default: + dev_err(dp->ds->dev, + "Unsupported interface: %d\n", state->interface); + return; + } + + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | + GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, + miicfg, port); + + gswip_mii_delay_setup(priv, dp, state->interface); +} + +static void gswip_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); + + if (!dsa_port_is_cpu(dp)) + gswip_port_set_link(priv, port, false); +} + +static void gswip_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + if (!dsa_port_is_cpu(dp) || interface != PHY_INTERFACE_MODE_INTERNAL) { + gswip_port_set_link(priv, port, true); + gswip_port_set_speed(priv, port, speed, interface); + gswip_port_set_duplex(priv, port, duplex); + gswip_port_set_pause(priv, port, tx_pause, rx_pause); + } + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, GSWIP_MII_CFG_EN, port); +} + +static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) + ethtool_puts(&data, gswip_rmon_cnt[i].name); +} + +static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, + u32 index) +{ + u32 result, val; + int err; + + regmap_write(priv->gswip, GSWIP_BM_RAM_ADDR, index); + regmap_write_bits(priv->gswip, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_ADDR_MASK | GSWIP_BM_RAM_CTRL_OPMOD | + GSWIP_BM_RAM_CTRL_BAS, + table | GSWIP_BM_RAM_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_BAS); + if (err) { + dev_err(priv->dev, "timeout while reading table: %u, index: %u\n", + table, index); + return 0; + } + + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(0), &result); + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(1), &val); + result |= val << 16; + + return result; +} + +static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct gswip_priv *priv = ds->priv; + const struct gswip_rmon_cnt_desc *rmon_cnt; + int i; + u64 high; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { + rmon_cnt = &gswip_rmon_cnt[i]; + + data[i] = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset); + if (rmon_cnt->size == 2) { + high = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset + 1); + data[i] |= high << 32; + } + } +} + +static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + if (sset != ETH_SS_STATS) + return 0; + + return ARRAY_SIZE(gswip_rmon_cnt); +} + +static int gswip_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_keee *e) +{ + if (e->tx_lpi_timer > 0x7f) + return -EINVAL; + + return 0; +} + +static void gswip_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_4p(dp->index), + GSWIP_MAC_CTRL_4_LPIEN); +} + +static int gswip_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + return regmap_update_bits(priv->gswip, GSWIP_MAC_CTRL_4p(dp->index), + GSWIP_MAC_CTRL_4_LPIEN | + GSWIP_MAC_CTRL_4_GWAIT_MASK | + GSWIP_MAC_CTRL_4_WAIT_MASK, + GSWIP_MAC_CTRL_4_LPIEN | + GSWIP_MAC_CTRL_4_GWAIT(timer) | + GSWIP_MAC_CTRL_4_WAIT(timer)); +} + +static bool gswip_support_eee(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + return true; + + return false; +} + +static struct phylink_pcs *gswip_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + if (priv->hw_info->mac_select_pcs) + return priv->hw_info->mac_select_pcs(config, interface); + + return NULL; +} + +static const struct phylink_mac_ops gswip_phylink_mac_ops = { + .mac_config = gswip_phylink_mac_config, + .mac_link_down = gswip_phylink_mac_link_down, + .mac_link_up = gswip_phylink_mac_link_up, + .mac_disable_tx_lpi = gswip_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = gswip_phylink_mac_enable_tx_lpi, + .mac_select_pcs = gswip_phylink_mac_select_pcs, +}; + +static const struct dsa_switch_ops gswip_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_setup = gswip_port_setup, + .port_enable = gswip_port_enable, + .port_disable = gswip_port_disable, + .port_pre_bridge_flags = gswip_port_pre_bridge_flags, + .port_bridge_flags = gswip_port_bridge_flags, + .port_bridge_join = gswip_port_bridge_join, + .port_bridge_leave = gswip_port_bridge_leave, + .port_fast_age = gswip_port_fast_age, + .port_vlan_filtering = gswip_port_vlan_filtering, + .port_vlan_add = gswip_port_vlan_add, + .port_vlan_del = gswip_port_vlan_del, + .port_stp_state_set = gswip_port_stp_state_set, + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, + .port_change_mtu = gswip_port_change_mtu, + .port_max_mtu = gswip_port_max_mtu, + .phylink_get_caps = gswip_phylink_get_caps, + .get_strings = gswip_get_strings, + .get_ethtool_stats = gswip_get_ethtool_stats, + .get_sset_count = gswip_get_sset_count, + .set_mac_eee = gswip_set_mac_eee, + .support_eee = gswip_support_eee, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, +}; + +void gswip_disable_switch(struct gswip_priv *priv) +{ + regmap_clear_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); +} +EXPORT_SYMBOL_GPL(gswip_disable_switch); + +static int gswip_validate_cpu_port(struct dsa_switch *ds) +{ + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int cpu_port = -1; + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + if (cpu_port != -1) + return dev_err_probe(ds->dev, -EINVAL, + "only a single CPU port is supported\n"); + + cpu_port = cpu_dp->index; + } + + if (cpu_port == -1) + return dev_err_probe(ds->dev, -EINVAL, "no CPU port defined\n"); + + if (BIT(cpu_port) & ~priv->hw_info->allowed_cpu_ports) + return dev_err_probe(ds->dev, -EINVAL, + "unsupported CPU port defined\n"); + + return 0; +} + +int gswip_probe_common(struct gswip_priv *priv, u32 version) +{ + int err; + + mutex_init(&priv->pce_table_lock); + + priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = priv->dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->ops = &gswip_switch_ops; + priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops; + priv->ds->priv = priv; + + /* The hardware has the 'major/minor' version bytes in the wrong order + * preventing numerical comparisons. Construct a 16-bit unsigned integer + * having the REV field as most significant byte and the MOD field as + * least significant byte. This is effectively swapping the two bytes of + * the version variable, but other than using swab16 it doesn't affect + * the source variable. + */ + priv->version = GSWIP_VERSION_REV(version) << 8 | + GSWIP_VERSION_MOD(version); + + err = dsa_register_switch(priv->ds); + if (err) + return dev_err_probe(priv->dev, err, "dsa switch registration failed\n"); + + err = gswip_validate_cpu_port(priv->ds); + if (err) + goto disable_switch; + + dev_info(priv->dev, "probed GSWIP version %lx mod %lx\n", + GSWIP_VERSION_REV(version), GSWIP_VERSION_MOD(version)); + + return 0; + +disable_switch: + gswip_disable_switch(priv); + dsa_unregister_switch(priv->ds); + + return err; +} +EXPORT_SYMBOL_GPL(gswip_probe_common); + +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>"); +MODULE_DESCRIPTION("Lantiq / Intel / MaxLinear GSWIP common functions"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq/lantiq_pce.h index e2be31f3672a..659f9a0638d9 100644 --- a/drivers/net/dsa/lantiq_pce.h +++ b/drivers/net/dsa/lantiq/lantiq_pce.h @@ -7,6 +7,8 @@ * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de> */ +#include "lantiq_gswip.h" + enum { OUT_MAC0 = 0, OUT_MAC1, @@ -74,13 +76,6 @@ enum { FLAG_NO, /*13*/ }; -struct gswip_pce_microcode { - u16 val_3; - u16 val_2; - u16 val_1; - u16 val_0; -}; - #define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ { val, msk, ((ns) << 10 | (out) << 4 | (len) >> 1),\ ((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 } diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx.c b/drivers/net/dsa/lantiq/mxl-gsw1xx.c new file mode 100644 index 000000000000..0816c61a47f1 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx.c @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* DSA Driver for MaxLinear GSW1xx switch devices + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> +#include <linux/regmap.h> +#include <net/dsa.h> + +#include "lantiq_gswip.h" +#include "mxl-gsw1xx.h" +#include "mxl-gsw1xx_pce.h" + +struct gsw1xx_priv { + struct mdio_device *mdio_dev; + int smdio_badr; + struct regmap *sgmii; + struct regmap *gpio; + struct regmap *clk; + struct regmap *shell; + struct phylink_pcs pcs; + phy_interface_t tbi_interface; + struct gswip_priv gswip; +}; + +static int gsw1xx_config_smdio_badr(struct gsw1xx_priv *priv, + unsigned int reg) +{ + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr = priv->smdio_badr; + int res; + + if (smdio_badr == GSW1XX_SMDIO_BADR_UNKNOWN || + reg - smdio_badr >= GSW1XX_SMDIO_BADR || + smdio_badr > reg) { + /* Configure the Switch Base Address */ + smdio_badr = reg & ~GENMASK(3, 0); + res = __mdiobus_write(bus, sw_addr, GSW1XX_SMDIO_BADR, smdio_badr); + if (res < 0) { + dev_err(&priv->mdio_dev->dev, + "%s: Error %d, configuring switch base\n", + __func__, res); + return res; + } + priv->smdio_badr = smdio_badr; + } + + return smdio_badr; +} + +static int gsw1xx_regmap_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct gsw1xx_priv *priv = context; + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr; + int res; + + smdio_badr = gsw1xx_config_smdio_badr(priv, reg); + if (smdio_badr < 0) + return smdio_badr; + + res = __mdiobus_read(bus, sw_addr, reg - smdio_badr); + if (res < 0) { + dev_err(&priv->mdio_dev->dev, "%s: Error %d reading 0x%x\n", + __func__, res, reg); + return res; + } + + *val = res; + + return 0; +} + +static int gsw1xx_regmap_write(void *context, unsigned int reg, + unsigned int val) +{ + struct gsw1xx_priv *priv = context; + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr; + int res; + + smdio_badr = gsw1xx_config_smdio_badr(priv, reg); + if (smdio_badr < 0) + return smdio_badr; + + res = __mdiobus_write(bus, sw_addr, reg - smdio_badr, val); + if (res < 0) + dev_err(&priv->mdio_dev->dev, + "%s: Error %d, writing 0x%x:0x%x\n", __func__, res, reg, + val); + + return res; +} + +static const struct regmap_bus gsw1xx_regmap_bus = { + .reg_write = gsw1xx_regmap_write, + .reg_read = gsw1xx_regmap_read, +}; + +static void gsw1xx_mdio_regmap_lock(void *mdio_lock) +{ + mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED); +} + +static void gsw1xx_mdio_regmap_unlock(void *mdio_lock) +{ + mutex_unlock(mdio_lock); +} + +static unsigned int gsw1xx_pcs_inband_caps(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE; +} + +static struct gsw1xx_priv *pcs_to_gsw1xx(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct gsw1xx_priv, pcs); +} + +static int gsw1xx_pcs_enable(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + /* Deassert SGMII shell reset */ + return regmap_clear_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); +} + +static void gsw1xx_pcs_disable(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + /* Assert SGMII shell reset */ + regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + + priv->tbi_interface = PHY_INTERFACE_MODE_NA; +} + +static void gsw1xx_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, + struct phylink_link_state *state) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + int ret; + u32 val; + + ret = regmap_read(priv->sgmii, GSW1XX_SGMII_TBI_TBISTAT, &val); + if (ret < 0) + return; + + state->link = !!(val & GSW1XX_SGMII_TBI_TBISTAT_LINK); + state->an_complete = !!(val & GSW1XX_SGMII_TBI_TBISTAT_AN_COMPLETE); + + ret = regmap_read(priv->sgmii, GSW1XX_SGMII_TBI_LPSTAT, &val); + if (ret < 0) + return; + + state->duplex = (val & GSW1XX_SGMII_TBI_LPSTAT_DUPLEX) ? + DUPLEX_FULL : DUPLEX_HALF; + if (val & GSW1XX_SGMII_TBI_LPSTAT_PAUSE_RX) + state->pause |= MLO_PAUSE_RX; + + if (val & GSW1XX_SGMII_TBI_LPSTAT_PAUSE_TX) + state->pause |= MLO_PAUSE_TX; + + switch (FIELD_GET(GSW1XX_SGMII_TBI_LPSTAT_SPEED, val)) { + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_10: + state->speed = SPEED_10; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_100: + state->speed = SPEED_100; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000: + state->speed = SPEED_1000; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII: + if (state->interface == PHY_INTERFACE_MODE_1000BASEX) + state->speed = SPEED_1000; + else if (state->interface == PHY_INTERFACE_MODE_2500BASEX) + state->speed = SPEED_2500; + else + state->speed = SPEED_UNKNOWN; + break; + } +} + +static int gsw1xx_pcs_phy_xaui_write(struct gsw1xx_priv *priv, u16 addr, + u16 data) +{ + int ret, val; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_D, data); + if (ret < 0) + return ret; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_A, addr); + if (ret < 0) + return ret; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_C, + GSW1XX_SGMII_PHY_WRITE | + GSW1XX_SGMII_PHY_RESET_N); + if (ret < 0) + return ret; + + return regmap_read_poll_timeout(priv->sgmii, GSW1XX_SGMII_PHY_C, + val, val & GSW1XX_SGMII_PHY_STATUS, + 1000, 100000); +} + +static int gsw1xx_pcs_reset(struct gsw1xx_priv *priv) +{ + int ret; + u16 val; + + /* Assert and deassert SGMII shell reset */ + ret = regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + ret = regmap_clear_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + /* Hardware Bringup FSM Enable */ + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_HWBU_CTRL, + GSW1XX_SGMII_PHY_HWBU_CTRL_EN_HWBU_FSM | + GSW1XX_SGMII_PHY_HWBU_CTRL_HW_FSM_EN); + if (ret < 0) + return ret; + + /* Configure SGMII PHY Receiver */ + val = FIELD_PREP(GSW1XX_SGMII_PHY_RX0_CFG2_EQ, + GSW1XX_SGMII_PHY_RX0_CFG2_EQ_DEF) | + GSW1XX_SGMII_PHY_RX0_CFG2_LOS_EN | + GSW1XX_SGMII_PHY_RX0_CFG2_TERM_EN | + FIELD_PREP(GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT, + GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT_DEF); + + /* TODO: Take care of inverted RX pair once generic property is + * available + */ + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_RX0_CFG2, val); + if (ret < 0) + return ret; + + val = FIELD_PREP(GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL, + GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL_DEF); + + /* TODO: Take care of inverted TX pair once generic property is + * available + */ + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_TX0_CFG3, val); + if (ret < 0) + return ret; + + /* Reset and Release TBI */ + val = GSW1XX_SGMII_TBI_TBICTL_INITTBI | GSW1XX_SGMII_TBI_TBICTL_ENTBI | + GSW1XX_SGMII_TBI_TBICTL_CRSTRR | GSW1XX_SGMII_TBI_TBICTL_CRSOFF; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TBICTL, val); + if (ret < 0) + return ret; + val &= ~GSW1XX_SGMII_TBI_TBICTL_INITTBI; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TBICTL, val); + if (ret < 0) + return ret; + + /* Release Tx Data Buffers */ + ret = regmap_set_bits(priv->sgmii, GSW1XX_SGMII_PCS_TXB_CTL, + GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB); + if (ret < 0) + return ret; + ret = regmap_clear_bits(priv->sgmii, GSW1XX_SGMII_PCS_TXB_CTL, + GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB); + if (ret < 0) + return ret; + + /* Release Rx Data Buffers */ + ret = regmap_set_bits(priv->sgmii, GSW1XX_SGMII_PCS_RXB_CTL, + GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB); + if (ret < 0) + return ret; + return regmap_clear_bits(priv->sgmii, GSW1XX_SGMII_PCS_RXB_CTL, + GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB); +} + +static int gsw1xx_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + u16 txaneg, anegctl, nco_ctrl; + bool reconf = false; + int ret = 0; + + /* do not unnecessarily disrupt link and skip resetting the hardware in + * case the PCS has previously been successfully configured for this + * interface mode + */ + if (priv->tbi_interface == interface) + reconf = true; + + /* mark PCS configuration as incomplete */ + priv->tbi_interface = PHY_INTERFACE_MODE_NA; + + if (!reconf) + ret = gsw1xx_pcs_reset(priv); + + if (ret) + return ret; + + /* override bootstrap pin settings + * OVRANEG sets ANEG Mode, Enable ANEG and restart ANEG to be + * taken from bits ANMODE, ANEGEN, RANEG of the ANEGCTL register. + * OVERABL sets ability bits in tx_config_reg to be taken from + * the TXANEGH and TXANEGL registers. + */ + anegctl = GSW1XX_SGMII_TBI_ANEGCTL_OVRANEG | + GSW1XX_SGMII_TBI_ANEGCTL_OVRABL; + + switch (phylink_get_link_timer_ns(interface)) { + case 10000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_10US); + break; + case 1600000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_1_6MS); + break; + case 5000000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_5MS); + break; + case 10000000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_10MS); + break; + default: + return -EINVAL; + } + + if (neg_mode & PHYLINK_PCS_NEG_INBAND) + anegctl |= GSW1XX_SGMII_TBI_ANEGCTL_ANEGEN; + + txaneg = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); + + if (interface == PHY_INTERFACE_MODE_SGMII) { + /* lacking a defined reverse-SGMII interface mode this + * driver only supports SGMII (MAC side) for now + */ + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_ANMODE, + GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_MAC); + txaneg |= ADVERTISE_LPACK; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX || + interface == PHY_INTERFACE_MODE_2500BASEX) { + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_ANMODE, + GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_1000BASEX); + } else { + dev_err(priv->gswip.dev, "%s: wrong interface mode %s\n", + __func__, phy_modes(interface)); + return -EINVAL; + } + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TXANEGH, + FIELD_GET(GENMASK(15, 8), txaneg)); + if (ret < 0) + return ret; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TXANEGL, + FIELD_GET(GENMASK(7, 0), txaneg)); + if (ret < 0) + return ret; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_ANEGCTL, anegctl); + if (ret < 0) + return ret; + + if (!reconf) { + /* setup SerDes clock speed */ + if (interface == PHY_INTERFACE_MODE_2500BASEX) + nco_ctrl = GSW1XX_SGMII_2G5 | GSW1XX_SGMII_2G5_NCO2; + else + nco_ctrl = GSW1XX_SGMII_1G | GSW1XX_SGMII_1G_NCO1; + + ret = regmap_update_bits(priv->clk, GSW1XX_CLK_NCO_CTRL, + GSW1XX_SGMII_HSP_MASK | + GSW1XX_SGMII_SEL, + nco_ctrl); + if (ret) + return ret; + + ret = gsw1xx_pcs_phy_xaui_write(priv, 0x30, 0x80); + if (ret) + return ret; + } + + /* PCS configuration has now been completed, store mode to prevent + * disrupting the link in case of future calls of this function for the + * same interface mode. + */ + priv->tbi_interface = interface; + + return 0; +} + +static void gsw1xx_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + regmap_set_bits(priv->sgmii, GSW1XX_SGMII_TBI_ANEGCTL, + GSW1XX_SGMII_TBI_ANEGCTL_RANEG); +} + +static void gsw1xx_pcs_link_up(struct phylink_pcs *pcs, + unsigned int neg_mode, + phy_interface_t interface, int speed, + int duplex) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + u16 lpstat; + + /* When in-band AN is enabled hardware will set lpstat */ + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) + return; + + /* Force speed and duplex settings */ + if (interface == PHY_INTERFACE_MODE_SGMII) { + if (speed == SPEED_10) + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_10); + else if (speed == SPEED_100) + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_100); + else + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000); + } else { + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII); + } + + if (duplex == DUPLEX_FULL) + lpstat |= GSW1XX_SGMII_TBI_LPSTAT_DUPLEX; + + regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_LPSTAT, lpstat); +} + +static const struct phylink_pcs_ops gsw1xx_pcs_ops = { + .pcs_inband_caps = gsw1xx_pcs_inband_caps, + .pcs_enable = gsw1xx_pcs_enable, + .pcs_disable = gsw1xx_pcs_disable, + .pcs_get_state = gsw1xx_pcs_get_state, + .pcs_config = gsw1xx_pcs_config, + .pcs_an_restart = gsw1xx_pcs_an_restart, + .pcs_link_up = gsw1xx_pcs_link_up, +}; + +static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct gswip_priv *priv = ds->priv; + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + + switch (port) { + case 0: + case 1: + case 2: + case 3: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + case 4: /* port 4: SGMII */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + if (priv->hw_info->supports_2500m) { + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + config->mac_capabilities |= MAC_2500FD; + } + return; /* no support for EEE on SGMII port */ + case 5: /* port 5: RGMII or RMII */ + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + phy_interface_set_rgmii(config->supported_interfaces); + break; + } + + config->lpi_capabilities = MAC_100FD | MAC_1000FD; + config->lpi_timer_default = 20; + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); +} + +static struct phylink_pcs *gsw1xx_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *gswip_priv = dp->ds->priv; + struct gsw1xx_priv *gsw1xx_priv = container_of(gswip_priv, + struct gsw1xx_priv, + gswip); + + switch (dp->index) { + case GSW1XX_SGMII_PORT: + return &gsw1xx_priv->pcs; + default: + return NULL; + } +} + +static struct regmap *gsw1xx_regmap_init(struct gsw1xx_priv *priv, + const char *name, + unsigned int reg_base, + unsigned int max_register) +{ + const struct regmap_config config = { + .name = name, + .reg_bits = 16, + .val_bits = 16, + .reg_base = reg_base, + .max_register = max_register, + .lock = gsw1xx_mdio_regmap_lock, + .unlock = gsw1xx_mdio_regmap_unlock, + .lock_arg = &priv->mdio_dev->bus->mdio_lock, + }; + + return devm_regmap_init(&priv->mdio_dev->dev, &gsw1xx_regmap_bus, + priv, &config); +} + +static int gsw1xx_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct gsw1xx_priv *priv; + u32 version; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mdio_dev = mdiodev; + priv->smdio_badr = GSW1XX_SMDIO_BADR_UNKNOWN; + + priv->gswip.dev = dev; + priv->gswip.hw_info = of_device_get_match_data(dev); + if (!priv->gswip.hw_info) + return -EINVAL; + + priv->gswip.gswip = gsw1xx_regmap_init(priv, "switch", + GSW1XX_SWITCH_BASE, 0xfff); + if (IS_ERR(priv->gswip.gswip)) + return PTR_ERR(priv->gswip.gswip); + + priv->gswip.mdio = gsw1xx_regmap_init(priv, "mdio", GSW1XX_MMDIO_BASE, + 0xff); + if (IS_ERR(priv->gswip.mdio)) + return PTR_ERR(priv->gswip.mdio); + + priv->gswip.mii = gsw1xx_regmap_init(priv, "mii", GSW1XX_RGMII_BASE, + 0xff); + if (IS_ERR(priv->gswip.mii)) + return PTR_ERR(priv->gswip.mii); + + priv->sgmii = gsw1xx_regmap_init(priv, "sgmii", GSW1XX_SGMII_BASE, + 0xfff); + if (IS_ERR(priv->sgmii)) + return PTR_ERR(priv->sgmii); + + priv->gpio = gsw1xx_regmap_init(priv, "gpio", GSW1XX_GPIO_BASE, 0xff); + if (IS_ERR(priv->gpio)) + return PTR_ERR(priv->gpio); + + priv->clk = gsw1xx_regmap_init(priv, "clk", GSW1XX_CLK_BASE, 0xff); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->shell = gsw1xx_regmap_init(priv, "shell", GSW1XX_SHELL_BASE, + 0xff); + if (IS_ERR(priv->shell)) + return PTR_ERR(priv->shell); + + priv->pcs.ops = &gsw1xx_pcs_ops; + priv->pcs.poll = true; + __set_bit(PHY_INTERFACE_MODE_SGMII, + priv->pcs.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + priv->pcs.supported_interfaces); + if (priv->gswip.hw_info->supports_2500m) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + priv->pcs.supported_interfaces); + priv->tbi_interface = PHY_INTERFACE_MODE_NA; + + /* assert SGMII reset to power down SGMII unit */ + ret = regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + /* configure GPIO pin-mux for MMDIO in case of external PHY connected to + * SGMII or RGMII as slave interface + */ + regmap_set_bits(priv->gpio, GPIO_ALTSEL0, 3); + regmap_set_bits(priv->gpio, GPIO_ALTSEL1, 3); + + ret = regmap_read(priv->gswip.gswip, GSWIP_VERSION, &version); + if (ret) + return ret; + + ret = gswip_probe_common(&priv->gswip, version); + if (ret) + return ret; + + dev_set_drvdata(dev, &priv->gswip); + + return 0; +} + +static void gsw1xx_remove(struct mdio_device *mdiodev) +{ + struct gswip_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + gswip_disable_switch(priv); + + dsa_unregister_switch(priv->ds); +} + +static void gsw1xx_shutdown(struct mdio_device *mdiodev) +{ + struct gswip_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dev_set_drvdata(&mdiodev->dev, NULL); + + gswip_disable_switch(priv); +} + +static const struct gswip_hw_info gsw12x_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = &gsw1xx_phylink_get_caps, + .supports_2500m = true, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +static const struct gswip_hw_info gsw140_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = &gsw1xx_phylink_get_caps, + .supports_2500m = true, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +static const struct gswip_hw_info gsw141_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = gsw1xx_phylink_get_caps, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +/* + * GSW125 is the industrial temperature version of GSW120. + * GSW145 is the industrial temperature version of GSW140. + */ +static const struct of_device_id gsw1xx_of_match[] = { + { .compatible = "maxlinear,gsw120", .data = &gsw12x_data }, + { .compatible = "maxlinear,gsw125", .data = &gsw12x_data }, + { .compatible = "maxlinear,gsw140", .data = &gsw140_data }, + { .compatible = "maxlinear,gsw141", .data = &gsw141_data }, + { .compatible = "maxlinear,gsw145", .data = &gsw140_data }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, gsw1xx_of_match); + +static struct mdio_driver gsw1xx_driver = { + .probe = gsw1xx_probe, + .remove = gsw1xx_remove, + .shutdown = gsw1xx_shutdown, + .mdiodrv.driver = { + .name = "mxl-gsw1xx", + .of_match_table = gsw1xx_of_match, + }, +}; + +mdio_module_driver(gsw1xx_driver); + +MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>"); +MODULE_DESCRIPTION("Driver for MaxLinear GSW1xx ethernet switch"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx.h b/drivers/net/dsa/lantiq/mxl-gsw1xx.h new file mode 100644 index 000000000000..38e03c048a26 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Register definitions for MaxLinear GSW1xx series switches + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + */ +#ifndef __MXL_GSW1XX_H +#define __MXL_GSW1XX_H + +#include <linux/bitfield.h> + +#define GSW1XX_PORTS 6 +/* Port used for RGMII or optional RMII */ +#define GSW1XX_MII_PORT 5 +/* Port used for SGMII */ +#define GSW1XX_SGMII_PORT 4 + +#define GSW1XX_SYS_CLK_FREQ 340000000 + +/* SMDIO switch register base address */ +#define GSW1XX_SMDIO_BADR 0x1f +#define GSW1XX_SMDIO_BADR_UNKNOWN -1 + +/* GSW1XX SGMII PCS */ +#define GSW1XX_SGMII_BASE 0xd000 +#define GSW1XX_SGMII_PHY_HWBU_CTRL 0x009 +#define GSW1XX_SGMII_PHY_HWBU_CTRL_EN_HWBU_FSM BIT(0) +#define GSW1XX_SGMII_PHY_HWBU_CTRL_HW_FSM_EN BIT(3) +#define GSW1XX_SGMII_TBI_TXANEGH 0x300 +#define GSW1XX_SGMII_TBI_TXANEGL 0x301 +#define GSW1XX_SGMII_TBI_ANEGCTL 0x304 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT GENMASK(1, 0) +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_10US 0 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_1_6MS 1 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_5MS 2 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_10MS 3 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANEGEN BIT(2) +#define GSW1XX_SGMII_TBI_ANEGCTL_RANEG BIT(3) +#define GSW1XX_SGMII_TBI_ANEGCTL_OVRABL BIT(4) +#define GSW1XX_SGMII_TBI_ANEGCTL_OVRANEG BIT(5) +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE GENMASK(7, 6) +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_1000BASEX 1 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_PHY 2 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_MAC 3 +#define GSW1XX_SGMII_TBI_ANEGCTL_BCOMP BIT(15) + +#define GSW1XX_SGMII_TBI_TBICTL 0x305 +#define GSW1XX_SGMII_TBI_TBICTL_INITTBI BIT(0) +#define GSW1XX_SGMII_TBI_TBICTL_ENTBI BIT(1) +#define GSW1XX_SGMII_TBI_TBICTL_CRSTRR BIT(4) +#define GSW1XX_SGMII_TBI_TBICTL_CRSOFF BIT(5) +#define GSW1XX_SGMII_TBI_TBISTAT 0x309 +#define GSW1XX_SGMII_TBI_TBISTAT_LINK BIT(0) +#define GSW1XX_SGMII_TBI_TBISTAT_AN_COMPLETE BIT(1) +#define GSW1XX_SGMII_TBI_LPSTAT 0x30a +#define GSW1XX_SGMII_TBI_LPSTAT_DUPLEX BIT(0) +#define GSW1XX_SGMII_TBI_LPSTAT_PAUSE_RX BIT(1) +#define GSW1XX_SGMII_TBI_LPSTAT_PAUSE_TX BIT(2) +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED GENMASK(6, 5) +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_10 0 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_100 1 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000 2 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII 3 +#define GSW1XX_SGMII_PHY_D 0x100 +#define GSW1XX_SGMII_PHY_A 0x101 +#define GSW1XX_SGMII_PHY_C 0x102 +#define GSW1XX_SGMII_PHY_STATUS BIT(0) +#define GSW1XX_SGMII_PHY_READ BIT(4) +#define GSW1XX_SGMII_PHY_WRITE BIT(8) +#define GSW1XX_SGMII_PHY_RESET_N BIT(12) +#define GSW1XX_SGMII_PCS_RXB_CTL 0x401 +#define GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB BIT(1) +#define GSW1XX_SGMII_PCS_TXB_CTL 0x404 +#define GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB BIT(1) + +#define GSW1XX_SGMII_PHY_RX0_CFG2 0x004 +#define GSW1XX_SGMII_PHY_RX0_CFG2_EQ GENMASK(2, 0) +#define GSW1XX_SGMII_PHY_RX0_CFG2_EQ_DEF 2 +#define GSW1XX_SGMII_PHY_RX0_CFG2_INVERT BIT(3) +#define GSW1XX_SGMII_PHY_RX0_CFG2_LOS_EN BIT(4) +#define GSW1XX_SGMII_PHY_RX0_CFG2_TERM_EN BIT(5) +#define GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT GENMASK(12, 6) +#define GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT_DEF 20 + +#define GSW1XX_SGMII_PHY_TX0_CFG3 0x007 +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_EN BIT(12) +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL GENMASK(11, 9) +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL_DEF 4 +#define GSW1XX_SGMII_PHY_TX0_CFG3_INVERT BIT(8) + +/* GSW1XX PDI Registers */ +#define GSW1XX_SWITCH_BASE 0xe000 + +/* GSW1XX MII Registers */ +#define GSW1XX_RGMII_BASE 0xf100 + +/* GSW1XX GPIO Registers */ +#define GSW1XX_GPIO_BASE 0xf300 +#define GPIO_ALTSEL0 0x83 +#define GPIO_ALTSEL0_EXTPHY_MUX_VAL 0x03c3 +#define GPIO_ALTSEL1 0x84 +#define GPIO_ALTSEL1_EXTPHY_MUX_VAL 0x003f + +/* MDIO bus controller */ +#define GSW1XX_MMDIO_BASE 0xf400 + +/* generic IC registers */ +#define GSW1XX_SHELL_BASE 0xfa00 +#define GSW1XX_SHELL_RST_REQ 0x01 +#define GSW1XX_RST_REQ_SGMII_SHELL BIT(5) +/* RGMII PAD Slew Control Register */ +#define GSW1XX_SHELL_RGMII_SLEW_CFG 0x78 +#define RGMII_SLEW_CFG_RX_2_5_V BIT(4) +#define RGMII_SLEW_CFG_TX_2_5_V BIT(5) + +/* SGMII clock related settings */ +#define GSW1XX_CLK_BASE 0xf900 +#define GSW1XX_CLK_NCO_CTRL 0x68 +#define GSW1XX_SGMII_HSP_MASK GENMASK(3, 2) +#define GSW1XX_SGMII_SEL BIT(1) +#define GSW1XX_SGMII_1G 0x0 +#define GSW1XX_SGMII_2G5 0xc +#define GSW1XX_SGMII_1G_NCO1 0x0 +#define GSW1XX_SGMII_2G5_NCO2 0x2 + +#endif /* __MXL_GSW1XX_H */ diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h b/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h new file mode 100644 index 000000000000..eefcd411a340 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PCE microcode code update for driver for MaxLinear GSW1xx switch chips + * + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include "lantiq_gswip.h" + +#define INSTR 0 +#define IPV6 1 +#define LENACCU 2 + +/* GSWIP_2.X */ +enum { + OUT_MAC0 = 0, + OUT_MAC1, + OUT_MAC2, + OUT_MAC3, + OUT_MAC4, + OUT_MAC5, + OUT_ETHTYP, + OUT_VTAG0, + OUT_VTAG1, + OUT_ITAG0, + OUT_ITAG1, /* 10 */ + OUT_ITAG2, + OUT_ITAG3, + OUT_IP0, + OUT_IP1, + OUT_IP2, + OUT_IP3, + OUT_SIP0, + OUT_SIP1, + OUT_SIP2, + OUT_SIP3, /* 20 */ + OUT_SIP4, + OUT_SIP5, + OUT_SIP6, + OUT_SIP7, + OUT_DIP0, + OUT_DIP1, + OUT_DIP2, + OUT_DIP3, + OUT_DIP4, + OUT_DIP5, /* 30 */ + OUT_DIP6, + OUT_DIP7, + OUT_SESID, + OUT_PROT, + OUT_APP0, + OUT_APP1, + OUT_IGMP0, + OUT_IGMP1, + OUT_STAG0 = 61, + OUT_STAG1 = 62, + OUT_NONE = 63, +}; + +/* parser's microcode flag type */ +enum { + FLAG_ITAG = 0, + FLAG_VLAN, + FLAG_SNAP, + FLAG_PPPOE, + FLAG_IPV6, + FLAG_IPV6FL, + FLAG_IPV4, + FLAG_IGMP, + FLAG_TU, + FLAG_HOP, + FLAG_NN1, /* 10 */ + FLAG_NN2, + FLAG_END, + FLAG_NO, /* 13 */ + FLAG_SVLAN, /* 14 */ +}; + +#define PCE_MC_M(val, msk, ns, out, len, type, flags, ipv4_len) \ + { (val), (msk), ((ns) << 10 | (out) << 4 | (len) >> 1),\ + ((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 } + +/* V22_2X (IPv6 issue fixed) */ +static const struct gswip_pce_microcode gsw1xx_pce_microcode[] = { + /* value mask ns fields L type flags ipv4_len */ + PCE_MC_M(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), + PCE_MC_M(0x8100, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x88A8, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x9100, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x8100, 0xFFFF, 5, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x88A8, 0xFFFF, 6, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x9100, 0xFFFF, 4, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x8864, 0xFFFF, 20, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0800, 0xFFFF, 24, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x86DD, 0xFFFF, 25, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x8863, 0xFFFF, 19, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xF800, 13, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0600, 0x0600, 44, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 15, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0xAAAA, 0xFFFF, 17, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0300, 0xFF00, 45, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_DIP7, 3, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 21, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), + PCE_MC_M(0x0021, 0xFFFF, 24, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0057, 0xFFFF, 25, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x4000, 0xF000, 27, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), + PCE_MC_M(0x6000, 0xF000, 30, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 28, OUT_IP3, 2, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 29, OUT_SIP0, 4, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, LENACCU, FLAG_NO, 0), + PCE_MC_M(0x1100, 0xFF00, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0600, 0xFF00, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_HOP, 0), + PCE_MC_M(0x2B00, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_NN1, 0), + PCE_MC_M(0x3C00, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_NN2, 0), + PCE_MC_M(0x0000, 0x0000, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x00F0, 38, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_HOP, 0), + PCE_MC_M(0x2B00, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_NN1, 0), + PCE_MC_M(0x3C00, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_NN2, 0), + PCE_MC_M(0x0000, 0x00FC, 44, OUT_PROT, 0, IPV6, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, IPV6, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_SIP0, 16, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), +}; diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c deleted file mode 100644 index 3c76a1a14aee..000000000000 --- a/drivers/net/dsa/lantiq_gswip.c +++ /dev/null @@ -1,2287 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs - * - * Copyright (C) 2010 Lantiq Deutschland - * Copyright (C) 2012 John Crispin <john@phrozen.org> - * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> - * - * The VLAN and bridge model the GSWIP hardware uses does not directly - * matches the model DSA uses. - * - * The hardware has 64 possible table entries for bridges with one VLAN - * ID, one flow id and a list of ports for each bridge. All entries which - * match the same flow ID are combined in the mac learning table, they - * act as one global bridge. - * The hardware does not support VLAN filter on the port, but on the - * bridge, this driver converts the DSA model to the hardware. - * - * The CPU gets all the exception frames which do not match any forwarding - * rule and the CPU port is also added to all bridges. This makes it possible - * to handle all the special cases easily in software. - * At the initialization the driver allocates one bridge table entry for - * each switch port which is used when the port is used without an - * explicit bridge. This prevents the frames from being forwarded - * between all LAN ports by default. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/firmware.h> -#include <linux/if_bridge.h> -#include <linux/if_vlan.h> -#include <linux/iopoll.h> -#include <linux/mfd/syscon.h> -#include <linux/module.h> -#include <linux/of_mdio.h> -#include <linux/of_net.h> -#include <linux/of_platform.h> -#include <linux/phy.h> -#include <linux/phylink.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <net/dsa.h> -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - -#include "lantiq_pce.h" - -/* GSWIP MDIO Registers */ -#define GSWIP_MDIO_GLOB 0x00 -#define GSWIP_MDIO_GLOB_ENABLE BIT(15) -#define GSWIP_MDIO_CTRL 0x08 -#define GSWIP_MDIO_CTRL_BUSY BIT(12) -#define GSWIP_MDIO_CTRL_RD BIT(11) -#define GSWIP_MDIO_CTRL_WR BIT(10) -#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f -#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5 -#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f -#define GSWIP_MDIO_READ 0x09 -#define GSWIP_MDIO_WRITE 0x0A -#define GSWIP_MDIO_MDC_CFG0 0x0B -#define GSWIP_MDIO_MDC_CFG1 0x0C -#define GSWIP_MDIO_PHYp(p) (0x15 - (p)) -#define GSWIP_MDIO_PHY_LINK_MASK 0x6000 -#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000 -#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000 -#define GSWIP_MDIO_PHY_LINK_UP 0x2000 -#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800 -#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800 -#define GSWIP_MDIO_PHY_SPEED_M10 0x0000 -#define GSWIP_MDIO_PHY_SPEED_M100 0x0800 -#define GSWIP_MDIO_PHY_SPEED_G1 0x1000 -#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600 -#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FDUP_EN 0x0200 -#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600 -#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180 -#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100 -#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180 -#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060 -#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020 -#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060 -#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f -#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \ - GSWIP_MDIO_PHY_FCONRX_MASK | \ - GSWIP_MDIO_PHY_FCONTX_MASK | \ - GSWIP_MDIO_PHY_LINK_MASK | \ - GSWIP_MDIO_PHY_SPEED_MASK | \ - GSWIP_MDIO_PHY_FDUP_MASK) - -/* GSWIP MII Registers */ -#define GSWIP_MII_CFGp(p) (0x2 * (p)) -#define GSWIP_MII_CFG_RESET BIT(15) -#define GSWIP_MII_CFG_EN BIT(14) -#define GSWIP_MII_CFG_ISOLATE BIT(13) -#define GSWIP_MII_CFG_LDCLKDIS BIT(12) -#define GSWIP_MII_CFG_RGMII_IBS BIT(8) -#define GSWIP_MII_CFG_RMII_CLK BIT(7) -#define GSWIP_MII_CFG_MODE_MIIP 0x0 -#define GSWIP_MII_CFG_MODE_MIIM 0x1 -#define GSWIP_MII_CFG_MODE_RMIIP 0x2 -#define GSWIP_MII_CFG_MODE_RMIIM 0x3 -#define GSWIP_MII_CFG_MODE_RGMII 0x4 -#define GSWIP_MII_CFG_MODE_GMII 0x9 -#define GSWIP_MII_CFG_MODE_MASK 0xf -#define GSWIP_MII_CFG_RATE_M2P5 0x00 -#define GSWIP_MII_CFG_RATE_M25 0x10 -#define GSWIP_MII_CFG_RATE_M125 0x20 -#define GSWIP_MII_CFG_RATE_M50 0x30 -#define GSWIP_MII_CFG_RATE_AUTO 0x40 -#define GSWIP_MII_CFG_RATE_MASK 0x70 -#define GSWIP_MII_PCDU0 0x01 -#define GSWIP_MII_PCDU1 0x03 -#define GSWIP_MII_PCDU5 0x05 -#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0) -#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7) - -/* GSWIP Core Registers */ -#define GSWIP_SWRES 0x000 -#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */ -#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */ -#define GSWIP_VERSION 0x013 -#define GSWIP_VERSION_REV_SHIFT 0 -#define GSWIP_VERSION_REV_MASK GENMASK(7, 0) -#define GSWIP_VERSION_MOD_SHIFT 8 -#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8) -#define GSWIP_VERSION_2_0 0x100 -#define GSWIP_VERSION_2_1 0x021 -#define GSWIP_VERSION_2_2 0x122 -#define GSWIP_VERSION_2_2_ETC 0x022 - -#define GSWIP_BM_RAM_VAL(x) (0x043 - (x)) -#define GSWIP_BM_RAM_ADDR 0x044 -#define GSWIP_BM_RAM_CTRL 0x045 -#define GSWIP_BM_RAM_CTRL_BAS BIT(15) -#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5) -#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0) -#define GSWIP_BM_QUEUE_GCTRL 0x04A -#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10) -/* buffer management Port Configuration Register */ -#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2)) -#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */ -#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */ -/* buffer management Port Control Register */ -#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2)) -#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */ -#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */ - -/* PCE */ -#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x)) -#define GSWIP_PCE_TBL_MASK 0x448 -#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x)) -#define GSWIP_PCE_TBL_ADDR 0x44E -#define GSWIP_PCE_TBL_CTRL 0x44F -#define GSWIP_PCE_TBL_CTRL_BAS BIT(15) -#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13) -#define GSWIP_PCE_TBL_CTRL_VLD BIT(12) -#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11) -#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7) -#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5) -#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00 -#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20 -#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40 -#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60 -#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0) -#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */ -#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */ -#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */ -#define GSWIP_PCE_GCTRL_0 0x456 -#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */ -#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3) -#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */ -#define GSWIP_PCE_GCTRL_1 0x457 -#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */ -#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */ -#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA)) -#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */ -#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */ -#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */ -#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0 -#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1 -#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2 -#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3 -#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7 -#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0) -#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA)) -#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */ -#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */ -#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */ -#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */ -#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */ -#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) - -#define GSWIP_MAC_FLEN 0x8C5 -#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) -#define GSWIP_MAC_CTRL_0_PADEN BIT(8) -#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) -#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 -#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 -#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 -#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 -#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 -#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C -#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 -#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C -#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 -#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 -#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 -#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) -#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ -#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ - -/* Ethernet Switch Fetch DMA Port Control Register */ -#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6)) -#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */ -#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */ -#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */ -#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */ -#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) - -/* Ethernet Switch Store DMA Port Control Register */ -#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) -#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ -#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ -#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ - -#define GSWIP_TABLE_ACTIVE_VLAN 0x01 -#define GSWIP_TABLE_VLAN_MAPPING 0x02 -#define GSWIP_TABLE_MAC_BRIDGE 0x0b -#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */ - -#define XRX200_GPHY_FW_ALIGN (16 * 1024) - -/* Maximum packet size supported by the switch. In theory this should be 10240, - * but long packets currently cause lock-ups with an MTU of over 2526. Medium - * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP - * over 2526), hence an MTU value of 2400 seems safe. This issue only affects - * packet reception. This is probably caused by the PPA engine, which is on the - * RX part of the device. Packet transmission works properly up to 10240. - */ -#define GSWIP_MAX_PACKET_LENGTH 2400 - -struct gswip_hw_info { - int max_ports; - int cpu_port; - const struct dsa_switch_ops *ops; -}; - -struct xway_gphy_match_data { - char *fe_firmware_name; - char *ge_firmware_name; -}; - -struct gswip_gphy_fw { - struct clk *clk_gate; - struct reset_control *reset; - u32 fw_addr_offset; - char *fw_name; -}; - -struct gswip_vlan { - struct net_device *bridge; - u16 vid; - u8 fid; -}; - -struct gswip_priv { - __iomem void *gswip; - __iomem void *mdio; - __iomem void *mii; - const struct gswip_hw_info *hw_info; - const struct xway_gphy_match_data *gphy_fw_name_cfg; - struct dsa_switch *ds; - struct device *dev; - struct regmap *rcu_regmap; - struct gswip_vlan vlans[64]; - int num_gphy_fw; - struct gswip_gphy_fw *gphy_fw; - u32 port_vlan_filter; - struct mutex pce_table_lock; -}; - -struct gswip_pce_table_entry { - u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index - u16 table; // PCE_TBL_CTRL.ADDR = pData->table - u16 key[8]; - u16 val[5]; - u16 mask; - u8 gmap; - bool type; - bool valid; - bool key_mode; -}; - -struct gswip_rmon_cnt_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} - -static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { - /** Receive Packet Count (only packets that are accepted and not discarded). */ - MIB_DESC(1, 0x1F, "RxGoodPkts"), - MIB_DESC(1, 0x23, "RxUnicastPkts"), - MIB_DESC(1, 0x22, "RxMulticastPkts"), - MIB_DESC(1, 0x21, "RxFCSErrorPkts"), - MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), - MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), - MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), - MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), - MIB_DESC(1, 0x20, "RxGoodPausePkts"), - MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), - MIB_DESC(1, 0x12, "Rx64BytePkts"), - MIB_DESC(1, 0x13, "Rx127BytePkts"), - MIB_DESC(1, 0x14, "Rx255BytePkts"), - MIB_DESC(1, 0x15, "Rx511BytePkts"), - MIB_DESC(1, 0x16, "Rx1023BytePkts"), - /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x17, "RxMaxBytePkts"), - MIB_DESC(1, 0x18, "RxDroppedPkts"), - MIB_DESC(1, 0x19, "RxFilteredPkts"), - MIB_DESC(2, 0x24, "RxGoodBytes"), - MIB_DESC(2, 0x26, "RxBadBytes"), - MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), - MIB_DESC(1, 0x0C, "TxGoodPkts"), - MIB_DESC(1, 0x06, "TxUnicastPkts"), - MIB_DESC(1, 0x07, "TxMulticastPkts"), - MIB_DESC(1, 0x00, "Tx64BytePkts"), - MIB_DESC(1, 0x01, "Tx127BytePkts"), - MIB_DESC(1, 0x02, "Tx255BytePkts"), - MIB_DESC(1, 0x03, "Tx511BytePkts"), - MIB_DESC(1, 0x04, "Tx1023BytePkts"), - /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x05, "TxMaxBytePkts"), - MIB_DESC(1, 0x08, "TxSingleCollCount"), - MIB_DESC(1, 0x09, "TxMultCollCount"), - MIB_DESC(1, 0x0A, "TxLateCollCount"), - MIB_DESC(1, 0x0B, "TxExcessCollCount"), - MIB_DESC(1, 0x0D, "TxPauseCount"), - MIB_DESC(1, 0x10, "TxDroppedPkts"), - MIB_DESC(2, 0x0E, "TxGoodBytes"), -}; - -static u32 gswip_switch_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->gswip + (offset * 4)); -} - -static void gswip_switch_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->gswip + (offset * 4)); -} - -static void gswip_switch_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_switch_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_switch_w(priv, val, offset); -} - -static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, - u32 cleared) -{ - u32 val; - - return readx_poll_timeout(__raw_readl, priv->gswip + (offset * 4), val, - (val & cleared) == 0, 20, 50000); -} - -static u32 gswip_mdio_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->mdio + (offset * 4)); -} - -static void gswip_mdio_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->mdio + (offset * 4)); -} - -static void gswip_mdio_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_mdio_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_mdio_w(priv, val, offset); -} - -static u32 gswip_mii_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->mii + (offset * 4)); -} - -static void gswip_mii_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->mii + (offset * 4)); -} - -static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_mii_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_mii_w(priv, val, offset); -} - -static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set, - int port) -{ - /* There's no MII_CFG register for the CPU port */ - if (!dsa_is_cpu_port(priv->ds, port)) - gswip_mii_mask(priv, clear, set, GSWIP_MII_CFGp(port)); -} - -static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 clear, u32 set, - int port) -{ - switch (port) { - case 0: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU0); - break; - case 1: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU1); - break; - case 5: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU5); - break; - } -} - -static int gswip_mdio_poll(struct gswip_priv *priv) -{ - int cnt = 100; - - while (likely(cnt--)) { - u32 ctrl = gswip_mdio_r(priv, GSWIP_MDIO_CTRL); - - if ((ctrl & GSWIP_MDIO_CTRL_BUSY) == 0) - return 0; - usleep_range(20, 40); - } - - return -ETIMEDOUT; -} - -static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct gswip_priv *priv = bus->priv; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - gswip_mdio_w(priv, val, GSWIP_MDIO_WRITE); - gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK), - GSWIP_MDIO_CTRL); - - return 0; -} - -static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) -{ - struct gswip_priv *priv = bus->priv; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK), - GSWIP_MDIO_CTRL); - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - return gswip_mdio_r(priv, GSWIP_MDIO_READ); -} - -static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np) -{ - struct dsa_switch *ds = priv->ds; - int err; - - ds->slave_mii_bus = mdiobus_alloc(); - if (!ds->slave_mii_bus) - return -ENOMEM; - - ds->slave_mii_bus->priv = priv; - ds->slave_mii_bus->read = gswip_mdio_rd; - ds->slave_mii_bus->write = gswip_mdio_wr; - ds->slave_mii_bus->name = "lantiq,xrx200-mdio"; - snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-mii", - dev_name(priv->dev)); - ds->slave_mii_bus->parent = priv->dev; - ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask; - - err = of_mdiobus_register(ds->slave_mii_bus, mdio_np); - if (err) - mdiobus_free(ds->slave_mii_bus); - - return err; -} - -static int gswip_pce_table_entry_read(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u16 crtl; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : - GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR); - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS, - GSWIP_PCE_TBL_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) - tbl->key[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_KEY(i)); - - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) - tbl->val[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_VAL(i)); - - tbl->mask = gswip_switch_r(priv, GSWIP_PCE_TBL_MASK); - - crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL); - - tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); - tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); - tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; - - mutex_unlock(&priv->pce_table_lock); - - return 0; -} - -static int gswip_pce_table_entry_write(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u16 crtl; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR); - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode, - GSWIP_PCE_TBL_CTRL); - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) - gswip_switch_w(priv, tbl->key[i], GSWIP_PCE_TBL_KEY(i)); - - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) - gswip_switch_w(priv, tbl->val[i], GSWIP_PCE_TBL_VAL(i)); - - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode, - GSWIP_PCE_TBL_CTRL); - - gswip_switch_w(priv, tbl->mask, GSWIP_PCE_TBL_MASK); - - crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL); - crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | - GSWIP_PCE_TBL_CTRL_GMAP_MASK); - if (tbl->type) - crtl |= GSWIP_PCE_TBL_CTRL_TYPE; - if (tbl->valid) - crtl |= GSWIP_PCE_TBL_CTRL_VLD; - crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; - crtl |= GSWIP_PCE_TBL_CTRL_BAS; - gswip_switch_w(priv, crtl, GSWIP_PCE_TBL_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - - mutex_unlock(&priv->pce_table_lock); - - return err; -} - -/* Add the LAN port into a bridge with the CPU port by - * default. This prevents automatic forwarding of - * packages between the LAN ports when no explicit - * bridge is configured. - */ -static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int cpu_port = priv->hw_info->cpu_port; - unsigned int max_ports = priv->hw_info->max_ports; - int err; - - if (port >= max_ports) { - dev_err(priv->dev, "single port for %i supported\n", port); - return -EIO; - } - - vlan_active.index = port + 1; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = 0; /* vid */ - vlan_active.val[0] = port + 1 /* fid */; - vlan_active.valid = add; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - if (!add) - return 0; - - vlan_mapping.index = port + 1; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - vlan_mapping.val[0] = 0 /* vid */; - vlan_mapping.val[1] = BIT(port) | BIT(cpu_port); - vlan_mapping.val[2] = 0; - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - return 0; -} - -static int gswip_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct gswip_priv *priv = ds->priv; - int err; - - if (!dsa_is_user_port(ds, port)) - return 0; - - if (!dsa_is_cpu_port(ds, port)) { - err = gswip_add_single_port_br(priv, port, true); - if (err) - return err; - } - - /* RMON Counter Enable for port */ - gswip_switch_w(priv, GSWIP_BM_PCFG_CNTEN, GSWIP_BM_PCFGp(port)); - - /* enable port fetch/store dma & VLAN Modification */ - gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_EN | - GSWIP_FDMA_PCTRL_VLANMOD_BOTH, - GSWIP_FDMA_PCTRLp(port)); - gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN, - GSWIP_SDMA_PCTRLp(port)); - - if (!dsa_is_cpu_port(ds, port)) { - u32 mdio_phy = 0; - - if (phydev) - mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); - } - - return 0; -} - -static void gswip_port_disable(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - - if (!dsa_is_user_port(ds, port)) - return; - - gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0, - GSWIP_FDMA_PCTRLp(port)); - gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, - GSWIP_SDMA_PCTRLp(port)); -} - -static int gswip_pce_load_microcode(struct gswip_priv *priv) -{ - int i; - int err; - - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, GSWIP_PCE_TBL_CTRL); - gswip_switch_w(priv, 0, GSWIP_PCE_TBL_MASK); - - for (i = 0; i < ARRAY_SIZE(gswip_pce_microcode); i++) { - gswip_switch_w(priv, i, GSWIP_PCE_TBL_ADDR); - gswip_switch_w(priv, gswip_pce_microcode[i].val_0, - GSWIP_PCE_TBL_VAL(0)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_1, - GSWIP_PCE_TBL_VAL(1)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_2, - GSWIP_PCE_TBL_VAL(2)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_3, - GSWIP_PCE_TBL_VAL(3)); - - /* start the table access: */ - gswip_switch_mask(priv, 0, GSWIP_PCE_TBL_CTRL_BAS, - GSWIP_PCE_TBL_CTRL); - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) - return err; - } - - /* tell the switch that the microcode is loaded */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MC_VALID, - GSWIP_PCE_GCTRL_0); - - return 0; -} - -static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - - /* Do not allow changing the VLAN filtering options while in bridge */ - if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) { - NL_SET_ERR_MSG_MOD(extack, - "Dynamic toggling of vlan_filtering not supported"); - return -EIO; - } - - if (vlan_filtering) { - /* Use port based VLAN tag */ - gswip_switch_mask(priv, - GSWIP_PCE_VCTRL_VSR, - GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR, - GSWIP_PCE_VCTRL(port)); - gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0, - GSWIP_PCE_PCTRL_0p(port)); - } else { - /* Use port based VLAN tag */ - gswip_switch_mask(priv, - GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR, - GSWIP_PCE_VCTRL_VSR, - GSWIP_PCE_VCTRL(port)); - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_TVM, - GSWIP_PCE_PCTRL_0p(port)); - } - - return 0; -} - -static int gswip_setup(struct dsa_switch *ds) -{ - struct gswip_priv *priv = ds->priv; - unsigned int cpu_port = priv->hw_info->cpu_port; - int i; - int err; - - gswip_switch_w(priv, GSWIP_SWRES_R0, GSWIP_SWRES); - usleep_range(5000, 10000); - gswip_switch_w(priv, 0, GSWIP_SWRES); - - /* disable port fetch/store dma on all ports */ - for (i = 0; i < priv->hw_info->max_ports; i++) { - gswip_port_disable(ds, i); - gswip_port_vlan_filtering(ds, i, false, NULL); - } - - /* enable Switch */ - gswip_mdio_mask(priv, 0, GSWIP_MDIO_GLOB_ENABLE, GSWIP_MDIO_GLOB); - - err = gswip_pce_load_microcode(priv); - if (err) { - dev_err(priv->dev, "writing PCE microcode failed, %i", err); - return err; - } - - /* Default unknown Broadcast/Multicast/Unicast port maps */ - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP1); - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2); - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3); - - /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an - * interoperability problem with this auto polling mechanism because - * their status registers think that the link is in a different state - * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set - * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the - * auto polling state machine consider the link being negotiated with - * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads - * to the switch port being completely dead (RX and TX are both not - * working). - * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F - * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes - * it would work fine for a few minutes to hours and then stop, on - * other device it would no traffic could be sent or received at all. - * Testing shows that when PHY auto polling is disabled these problems - * go away. - */ - gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0); - - /* Configure the MDIO Clock 2.5 MHz */ - gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - - /* Disable the xMII interface and clear it's isolation bit */ - for (i = 0; i < priv->hw_info->max_ports; i++) - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, - 0, i); - - /* enable special tag insertion on cpu port */ - gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, - GSWIP_FDMA_PCTRLp(cpu_port)); - - /* accept special tag in ingress direction */ - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, - GSWIP_PCE_PCTRL_0p(cpu_port)); - - gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, - GSWIP_BM_QUEUE_GCTRL); - - /* VLAN aware Switching */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_VLAN, GSWIP_PCE_GCTRL_0); - - /* Flush MAC Table */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MTFL, GSWIP_PCE_GCTRL_0); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_MTFL); - if (err) { - dev_err(priv->dev, "MAC flushing didn't finish\n"); - return err; - } - - ds->mtu_enforcement_ingress = true; - - gswip_port_enable(ds, cpu_port, NULL); - - ds->configure_vlan_while_not_filtering = false; - - return 0; -} - -static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, - int port, - enum dsa_tag_protocol mp) -{ - return DSA_TAG_PROTO_GSWIP; -} - -static int gswip_vlan_active_create(struct gswip_priv *priv, - struct net_device *bridge, - int fid, u16 vid) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int idx = -1; - int err; - int i; - - /* Look for a free slot */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (!priv->vlans[i].bridge) { - idx = i; - break; - } - } - - if (idx == -1) - return -ENOSPC; - - if (fid == -1) - fid = idx; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = vid; - vlan_active.val[0] = fid; - vlan_active.valid = true; - - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - priv->vlans[idx].bridge = bridge; - priv->vlans[idx].vid = vid; - priv->vlans[idx].fid = fid; - - return idx; -} - -static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - int err; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.valid = false; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) - dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); - priv->vlans[idx].bridge = NULL; - - return err; -} - -static int gswip_vlan_add_unaware(struct gswip_priv *priv, - struct net_device *bridge, int port) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - bool active_vlan_created = false; - int idx = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - idx = i; - break; - } - } - - /* If this bridge is not programmed yet, add a Active VLAN table - * entry in a free slot and prepare the VLAN mapping table entry. - */ - if (idx == -1) { - idx = gswip_vlan_active_create(priv, bridge, -1, 0); - if (idx < 0) - return idx; - active_vlan_created = true; - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - /* VLAN ID byte, maps to the VLAN ID of vlan active table */ - vlan_mapping.val[0] = 0; - } else { - /* Read the existing VLAN mapping entry from the switch */ - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", - err); - return err; - } - } - - /* Update the VLAN mapping entry and write it to the switch */ - vlan_mapping.val[1] |= BIT(cpu_port); - vlan_mapping.val[1] |= BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - /* In case an Active VLAN was creaetd delete it again */ - if (active_vlan_created) - gswip_vlan_active_remove(priv, idx); - return err; - } - - gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port)); - return 0; -} - -static int gswip_vlan_add_aware(struct gswip_priv *priv, - struct net_device *bridge, int port, - u16 vid, bool untagged, - bool pvid) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - bool active_vlan_created = false; - int idx = -1; - int fid = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - if (fid != -1 && fid != priv->vlans[i].fid) - dev_err(priv->dev, "one bridge with multiple flow ids\n"); - fid = priv->vlans[i].fid; - if (priv->vlans[i].vid == vid) { - idx = i; - break; - } - } - } - - /* If this bridge is not programmed yet, add a Active VLAN table - * entry in a free slot and prepare the VLAN mapping table entry. - */ - if (idx == -1) { - idx = gswip_vlan_active_create(priv, bridge, fid, vid); - if (idx < 0) - return idx; - active_vlan_created = true; - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - /* VLAN ID byte, maps to the VLAN ID of vlan active table */ - vlan_mapping.val[0] = vid; - } else { - /* Read the existing VLAN mapping entry from the switch */ - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", - err); - return err; - } - } - - vlan_mapping.val[0] = vid; - /* Update the VLAN mapping entry and write it to the switch */ - vlan_mapping.val[1] |= BIT(cpu_port); - vlan_mapping.val[2] |= BIT(cpu_port); - vlan_mapping.val[1] |= BIT(port); - if (untagged) - vlan_mapping.val[2] &= ~BIT(port); - else - vlan_mapping.val[2] |= BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - /* In case an Active VLAN was creaetd delete it again */ - if (active_vlan_created) - gswip_vlan_active_remove(priv, idx); - return err; - } - - if (pvid) - gswip_switch_w(priv, idx, GSWIP_PCE_DEFPVID(port)); - - return 0; -} - -static int gswip_vlan_remove(struct gswip_priv *priv, - struct net_device *bridge, int port, - u16 vid, bool pvid, bool vlan_aware) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - int idx = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - (!vlan_aware || priv->vlans[i].vid == vid)) { - idx = i; - break; - } - } - - if (idx == -1) { - dev_err(priv->dev, "bridge to leave does not exists\n"); - return -ENOENT; - } - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); - return err; - } - - vlan_mapping.val[1] &= ~BIT(port); - vlan_mapping.val[2] &= ~BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - /* In case all ports are removed from the bridge, remove the VLAN */ - if ((vlan_mapping.val[1] & ~BIT(cpu_port)) == 0) { - err = gswip_vlan_active_remove(priv, idx); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", - err); - return err; - } - } - - /* GSWIP 2.2 (GRX300) and later program here the VID directly. */ - if (pvid) - gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port)); - - return 0; -} - -static int gswip_port_bridge_join(struct dsa_switch *ds, int port, - struct dsa_bridge bridge, - bool *tx_fwd_offload, - struct netlink_ext_ack *extack) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - int err; - - /* When the bridge uses VLAN filtering we have to configure VLAN - * specific bridges. No bridge is configured here. - */ - if (!br_vlan_enabled(br)) { - err = gswip_vlan_add_unaware(priv, br, port); - if (err) - return err; - priv->port_vlan_filter &= ~BIT(port); - } else { - priv->port_vlan_filter |= BIT(port); - } - return gswip_add_single_port_br(priv, port, false); -} - -static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, - struct dsa_bridge bridge) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - - gswip_add_single_port_br(priv, port, true); - - /* When the bridge uses VLAN filtering we have to configure VLAN - * specific bridges. No bridge is configured here. - */ - if (!br_vlan_enabled(br)) - gswip_vlan_remove(priv, br, port, 0, true, false); -} - -static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - unsigned int max_ports = priv->hw_info->max_ports; - int pos = max_ports; - int i, idx = -1; - - /* We only support VLAN filtering on bridges */ - if (!dsa_is_cpu_port(ds, port) && !bridge) - return -EOPNOTSUPP; - - /* Check if there is already a page for this VLAN */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - priv->vlans[i].vid == vlan->vid) { - idx = i; - break; - } - } - - /* If this VLAN is not programmed yet, we have to reserve - * one entry in the VLAN table. Make sure we start at the - * next position round. - */ - if (idx == -1) { - /* Look for a free slot */ - for (; pos < ARRAY_SIZE(priv->vlans); pos++) { - if (!priv->vlans[pos].bridge) { - idx = pos; - pos++; - break; - } - } - - if (idx == -1) { - NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); - return -ENOSPC; - } - } - - return 0; -} - -static int gswip_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - int err; - - err = gswip_port_vlan_prepare(ds, port, vlan, extack); - if (err) - return err; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_add_aware(priv, bridge, port, vlan->vid, - untagged, pvid); -} - -static int gswip_port_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_remove(priv, bridge, port, vlan->vid, pvid, true); -} - -static void gswip_port_fast_age(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to read mac bridge: %d\n", - err); - return; - } - - if (!mac_bridge.valid) - continue; - - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) - continue; - - if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port) - continue; - - mac_bridge.valid = false; - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to write mac bridge: %d\n", - err); - return; - } - } -} - -static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - struct gswip_priv *priv = ds->priv; - u32 stp_state; - - switch (state) { - case BR_STATE_DISABLED: - gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, - GSWIP_SDMA_PCTRLp(port)); - return; - case BR_STATE_BLOCKING: - case BR_STATE_LISTENING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; - break; - case BR_STATE_LEARNING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; - break; - case BR_STATE_FORWARDING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; - break; - default: - dev_err(priv->dev, "invalid STP state: %d\n", state); - return; - } - - gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN, - GSWIP_SDMA_PCTRLp(port)); - gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_PSTATE_MASK, stp_state, - GSWIP_PCE_PCTRL_0p(port)); -} - -static int gswip_port_fdb(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, bool add) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int fid = -1; - int i; - int err; - - if (!bridge) - return -EINVAL; - - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - fid = priv->vlans[i].fid; - break; - } - } - - if (fid == -1) { - dev_err(priv->dev, "Port not part of a bridge\n"); - return -EINVAL; - } - - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.key_mode = true; - mac_bridge.key[0] = addr[5] | (addr[4] << 8); - mac_bridge.key[1] = addr[3] | (addr[2] << 8); - mac_bridge.key[2] = addr[1] | (addr[0] << 8); - mac_bridge.key[3] = fid; - mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ - mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC; - mac_bridge.valid = add; - - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) - dev_err(priv->dev, "failed to write mac bridge: %d\n", err); - - return err; -} - -static int gswip_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - return gswip_port_fdb(ds, port, addr, vid, true); -} - -static int gswip_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - return gswip_port_fdb(ds, port, addr, vid, false); -} - -static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned char addr[6]; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, - "failed to read mac bridge entry %d: %d\n", - i, err); - return err; - } - - if (!mac_bridge.valid) - continue; - - addr[5] = mac_bridge.key[0] & 0xff; - addr[4] = (mac_bridge.key[0] >> 8) & 0xff; - addr[3] = mac_bridge.key[1] & 0xff; - addr[2] = (mac_bridge.key[1] >> 8) & 0xff; - addr[1] = mac_bridge.key[2] & 0xff; - addr[0] = (mac_bridge.key[2] >> 8) & 0xff; - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) { - if (mac_bridge.val[0] & BIT(port)) { - err = cb(addr, 0, true, data); - if (err) - return err; - } - } else { - if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) { - err = cb(addr, 0, false, data); - if (err) - return err; - } - } - } - return 0; -} - -static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -{ - /* Includes 8 bytes for special header. */ - return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -} - -static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -{ - struct gswip_priv *priv = ds->priv; - int cpu_port = priv->hw_info->cpu_port; - - /* CPU port always has maximum mtu of user ports, so use it to set - * switch frame size, including 8 byte special header. - */ - if (port == cpu_port) { - new_mtu += 8; - gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, - GSWIP_MAC_FLEN); - } - - /* Enable MLEN for ports with non-standard MTUs, including the special - * header on the CPU port added above. - */ - if (new_mtu != ETH_DATA_LEN) - gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, - GSWIP_MAC_CTRL_2p(port)); - else - gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, - GSWIP_MAC_CTRL_2p(port)); - - return 0; -} - -static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port, - struct phylink_config *config) -{ - switch (port) { - case 0: - case 1: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_MII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_REVMII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - - case 2: - case 3: - case 4: - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - - case 5: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - } - - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; -} - -static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port, - struct phylink_config *config) -{ - switch (port) { - case 0: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_GMII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - - case 1: - case 2: - case 3: - case 4: - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - - case 5: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - } - - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; -} - -static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) -{ - u32 mdio_phy; - - if (link) - mdio_phy = GSWIP_MDIO_PHY_LINK_UP; - else - mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); -} - -static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, - phy_interface_t interface) -{ - u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; - - switch (speed) { - case SPEED_10: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M2P5; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_100: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M25; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_1000: - mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; - - mii_cfg = GSWIP_MII_CFG_RATE_M125; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; - break; - } - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0, - GSWIP_MAC_CTRL_0p(port)); -} - -static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) -{ - u32 mac_ctrl_0, mdio_phy; - - if (duplex == DUPLEX_FULL) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; - mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; - mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; - } - - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0, - GSWIP_MAC_CTRL_0p(port)); - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); -} - -static void gswip_port_set_pause(struct gswip_priv *priv, int port, - bool tx_pause, bool rx_pause) -{ - u32 mac_ctrl_0, mdio_phy; - - if (tx_pause && rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_EN; - } else if (tx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_DIS; - } else if (rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_DIS; - } - - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK, - mac_ctrl_0, GSWIP_MAC_CTRL_0p(port)); - gswip_mdio_mask(priv, - GSWIP_MDIO_PHY_FCONTX_MASK | - GSWIP_MDIO_PHY_FCONRX_MASK, - mdio_phy, GSWIP_MDIO_PHYp(port)); -} - -static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct gswip_priv *priv = ds->priv; - u32 miicfg = 0; - - miicfg |= GSWIP_MII_CFG_LDCLKDIS; - - switch (state->interface) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_INTERNAL: - miicfg |= GSWIP_MII_CFG_MODE_MIIM; - break; - case PHY_INTERFACE_MODE_REVMII: - miicfg |= GSWIP_MII_CFG_MODE_MIIP; - break; - case PHY_INTERFACE_MODE_RMII: - miicfg |= GSWIP_MII_CFG_MODE_RMIIM; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - miicfg |= GSWIP_MII_CFG_MODE_RGMII; - break; - case PHY_INTERFACE_MODE_GMII: - miicfg |= GSWIP_MII_CFG_MODE_GMII; - break; - default: - dev_err(ds->dev, - "Unsupported interface: %d\n", state->interface); - return; - } - - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | - GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, - miicfg, port); - - switch (state->interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK | - GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port); - break; - default: - break; - } -} - -static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) -{ - struct gswip_priv *priv = ds->priv; - - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); - - if (!dsa_is_cpu_port(ds, port)) - gswip_port_set_link(priv, port, false); -} - -static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct gswip_priv *priv = ds->priv; - - if (!dsa_is_cpu_port(ds, port)) { - gswip_port_set_link(priv, port, true); - gswip_port_set_speed(priv, port, speed, interface); - gswip_port_set_duplex(priv, port, duplex); - gswip_port_set_pause(priv, port, tx_pause, rx_pause); - } - - gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port); -} - -static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, - uint8_t *data) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) - strncpy(data + i * ETH_GSTRING_LEN, gswip_rmon_cnt[i].name, - ETH_GSTRING_LEN); -} - -static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, - u32 index) -{ - u32 result; - int err; - - gswip_switch_w(priv, index, GSWIP_BM_RAM_ADDR); - gswip_switch_mask(priv, GSWIP_BM_RAM_CTRL_ADDR_MASK | - GSWIP_BM_RAM_CTRL_OPMOD, - table | GSWIP_BM_RAM_CTRL_BAS, - GSWIP_BM_RAM_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, - GSWIP_BM_RAM_CTRL_BAS); - if (err) { - dev_err(priv->dev, "timeout while reading table: %u, index: %u", - table, index); - return 0; - } - - result = gswip_switch_r(priv, GSWIP_BM_RAM_VAL(0)); - result |= gswip_switch_r(priv, GSWIP_BM_RAM_VAL(1)) << 16; - - return result; -} - -static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct gswip_priv *priv = ds->priv; - const struct gswip_rmon_cnt_desc *rmon_cnt; - int i; - u64 high; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { - rmon_cnt = &gswip_rmon_cnt[i]; - - data[i] = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset); - if (rmon_cnt->size == 2) { - high = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset + 1); - data[i] |= high << 32; - } - } -} - -static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(gswip_rmon_cnt); -} - -static const struct dsa_switch_ops gswip_xrx200_switch_ops = { - .get_tag_protocol = gswip_get_tag_protocol, - .setup = gswip_setup, - .port_enable = gswip_port_enable, - .port_disable = gswip_port_disable, - .port_bridge_join = gswip_port_bridge_join, - .port_bridge_leave = gswip_port_bridge_leave, - .port_fast_age = gswip_port_fast_age, - .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_add = gswip_port_vlan_add, - .port_vlan_del = gswip_port_vlan_del, - .port_stp_state_set = gswip_port_stp_state_set, - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, - .port_change_mtu = gswip_port_change_mtu, - .port_max_mtu = gswip_port_max_mtu, - .phylink_get_caps = gswip_xrx200_phylink_get_caps, - .phylink_mac_config = gswip_phylink_mac_config, - .phylink_mac_link_down = gswip_phylink_mac_link_down, - .phylink_mac_link_up = gswip_phylink_mac_link_up, - .get_strings = gswip_get_strings, - .get_ethtool_stats = gswip_get_ethtool_stats, - .get_sset_count = gswip_get_sset_count, -}; - -static const struct dsa_switch_ops gswip_xrx300_switch_ops = { - .get_tag_protocol = gswip_get_tag_protocol, - .setup = gswip_setup, - .port_enable = gswip_port_enable, - .port_disable = gswip_port_disable, - .port_bridge_join = gswip_port_bridge_join, - .port_bridge_leave = gswip_port_bridge_leave, - .port_fast_age = gswip_port_fast_age, - .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_add = gswip_port_vlan_add, - .port_vlan_del = gswip_port_vlan_del, - .port_stp_state_set = gswip_port_stp_state_set, - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, - .port_change_mtu = gswip_port_change_mtu, - .port_max_mtu = gswip_port_max_mtu, - .phylink_get_caps = gswip_xrx300_phylink_get_caps, - .phylink_mac_config = gswip_phylink_mac_config, - .phylink_mac_link_down = gswip_phylink_mac_link_down, - .phylink_mac_link_up = gswip_phylink_mac_link_up, - .get_strings = gswip_get_strings, - .get_ethtool_stats = gswip_get_ethtool_stats, - .get_sset_count = gswip_get_sset_count, -}; - -static const struct xway_gphy_match_data xrx200a1x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", -}; - -static const struct xway_gphy_match_data xrx200a2x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", -}; - -static const struct xway_gphy_match_data xrx300_gphy_data = { - .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", - .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", -}; - -static const struct of_device_id xway_gphy_match[] __maybe_unused = { - { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL }, - { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data }, - { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data }, - { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data }, - { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data }, - {}, -}; - -static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw) -{ - struct device *dev = priv->dev; - const struct firmware *fw; - void *fw_addr; - dma_addr_t dma_addr; - dma_addr_t dev_addr; - size_t size; - int ret; - - ret = clk_prepare_enable(gphy_fw->clk_gate); - if (ret) - return ret; - - reset_control_assert(gphy_fw->reset); - - /* The vendor BSP uses a 200ms delay after asserting the reset line. - * Without this some users are observing that the PHY is not coming up - * on the MDIO bus. - */ - msleep(200); - - ret = request_firmware(&fw, gphy_fw->fw_name, dev); - if (ret) { - dev_err(dev, "failed to load firmware: %s, error: %i\n", - gphy_fw->fw_name, ret); - return ret; - } - - /* GPHY cores need the firmware code in a persistent and contiguous - * memory area with a 16 kB boundary aligned start address. - */ - size = fw->size + XRX200_GPHY_FW_ALIGN; - - fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); - if (fw_addr) { - fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); - dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); - memcpy(fw_addr, fw->data, fw->size); - } else { - dev_err(dev, "failed to alloc firmware memory\n"); - release_firmware(fw); - return -ENOMEM; - } - - release_firmware(fw); - - ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr); - if (ret) - return ret; - - reset_control_deassert(gphy_fw->reset); - - return ret; -} - -static int gswip_gphy_fw_probe(struct gswip_priv *priv, - struct gswip_gphy_fw *gphy_fw, - struct device_node *gphy_fw_np, int i) -{ - struct device *dev = priv->dev; - u32 gphy_mode; - int ret; - char gphyname[10]; - - snprintf(gphyname, sizeof(gphyname), "gphy%d", i); - - gphy_fw->clk_gate = devm_clk_get(dev, gphyname); - if (IS_ERR(gphy_fw->clk_gate)) { - dev_err(dev, "Failed to lookup gate clock\n"); - return PTR_ERR(gphy_fw->clk_gate); - } - - ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset); - if (ret) - return ret; - - ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode); - /* Default to GE mode */ - if (ret) - gphy_mode = GPHY_MODE_GE; - - switch (gphy_mode) { - case GPHY_MODE_FE: - gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name; - break; - case GPHY_MODE_GE: - gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name; - break; - default: - dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); - return -EINVAL; - } - - gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np); - if (IS_ERR(gphy_fw->reset)) - return dev_err_probe(dev, PTR_ERR(gphy_fw->reset), - "Failed to lookup gphy reset\n"); - - return gswip_gphy_fw_load(priv, gphy_fw); -} - -static void gswip_gphy_fw_remove(struct gswip_priv *priv, - struct gswip_gphy_fw *gphy_fw) -{ - int ret; - - /* check if the device was fully probed */ - if (!gphy_fw->fw_name) - return; - - ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0); - if (ret) - dev_err(priv->dev, "can not reset GPHY FW pointer"); - - clk_disable_unprepare(gphy_fw->clk_gate); - - reset_control_put(gphy_fw->reset); -} - -static int gswip_gphy_fw_list(struct gswip_priv *priv, - struct device_node *gphy_fw_list_np, u32 version) -{ - struct device *dev = priv->dev; - struct device_node *gphy_fw_np; - const struct of_device_id *match; - int err; - int i = 0; - - /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older - * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also - * needs a different GPHY firmware. - */ - if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) { - switch (version) { - case GSWIP_VERSION_2_0: - priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data; - break; - case GSWIP_VERSION_2_1: - priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data; - break; - default: - dev_err(dev, "unknown GSWIP version: 0x%x", version); - return -ENOENT; - } - } - - match = of_match_node(xway_gphy_match, gphy_fw_list_np); - if (match && match->data) - priv->gphy_fw_name_cfg = match->data; - - if (!priv->gphy_fw_name_cfg) { - dev_err(dev, "GPHY compatible type not supported"); - return -ENOENT; - } - - priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np); - if (!priv->num_gphy_fw) - return -ENOENT; - - priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np, - "lantiq,rcu"); - if (IS_ERR(priv->rcu_regmap)) - return PTR_ERR(priv->rcu_regmap); - - priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw, - sizeof(*priv->gphy_fw), - GFP_KERNEL | __GFP_ZERO); - if (!priv->gphy_fw) - return -ENOMEM; - - for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) { - err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i], - gphy_fw_np, i); - if (err) { - of_node_put(gphy_fw_np); - goto remove_gphy; - } - i++; - } - - /* The standalone PHY11G requires 300ms to be fully - * initialized and ready for any MDIO communication after being - * taken out of reset. For the SoC-internal GPHY variant there - * is no (known) documentation for the minimum time after a - * reset. Use the same value as for the standalone variant as - * some users have reported internal PHYs not being detected - * without any delay. - */ - msleep(300); - - return 0; - -remove_gphy: - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); - return err; -} - -static int gswip_probe(struct platform_device *pdev) -{ - struct gswip_priv *priv; - struct device_node *np, *mdio_np, *gphy_fw_np; - struct device *dev = &pdev->dev; - int err; - int i; - u32 version; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->gswip = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(priv->gswip)) - return PTR_ERR(priv->gswip); - - priv->mdio = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(priv->mdio)) - return PTR_ERR(priv->mdio); - - priv->mii = devm_platform_ioremap_resource(pdev, 2); - if (IS_ERR(priv->mii)) - return PTR_ERR(priv->mii); - - priv->hw_info = of_device_get_match_data(dev); - if (!priv->hw_info) - return -EINVAL; - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->hw_info->max_ports; - priv->ds->priv = priv; - priv->ds->ops = priv->hw_info->ops; - priv->dev = dev; - mutex_init(&priv->pce_table_lock); - version = gswip_switch_r(priv, GSWIP_VERSION); - - np = dev->of_node; - switch (version) { - case GSWIP_VERSION_2_0: - case GSWIP_VERSION_2_1: - if (!of_device_is_compatible(np, "lantiq,xrx200-gswip")) - return -EINVAL; - break; - case GSWIP_VERSION_2_2: - case GSWIP_VERSION_2_2_ETC: - if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") && - !of_device_is_compatible(np, "lantiq,xrx330-gswip")) - return -EINVAL; - break; - default: - dev_err(dev, "unknown GSWIP version: 0x%x", version); - return -ENOENT; - } - - /* bring up the mdio bus */ - gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw"); - if (gphy_fw_np) { - err = gswip_gphy_fw_list(priv, gphy_fw_np, version); - of_node_put(gphy_fw_np); - if (err) { - dev_err(dev, "gphy fw probe failed\n"); - return err; - } - } - - /* bring up the mdio bus */ - mdio_np = of_get_compatible_child(dev->of_node, "lantiq,xrx200-mdio"); - if (mdio_np) { - err = gswip_mdio(priv, mdio_np); - if (err) { - dev_err(dev, "mdio probe failed\n"); - goto put_mdio_node; - } - } - - err = dsa_register_switch(priv->ds); - if (err) { - dev_err(dev, "dsa switch register failed: %i\n", err); - goto mdio_bus; - } - if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) { - dev_err(dev, "wrong CPU port defined, HW only supports port: %i", - priv->hw_info->cpu_port); - err = -EINVAL; - goto disable_switch; - } - - platform_set_drvdata(pdev, priv); - - dev_info(dev, "probed GSWIP version %lx mod %lx\n", - (version & GSWIP_VERSION_REV_MASK) >> GSWIP_VERSION_REV_SHIFT, - (version & GSWIP_VERSION_MOD_MASK) >> GSWIP_VERSION_MOD_SHIFT); - return 0; - -disable_switch: - gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); - dsa_unregister_switch(priv->ds); -mdio_bus: - if (mdio_np) { - mdiobus_unregister(priv->ds->slave_mii_bus); - mdiobus_free(priv->ds->slave_mii_bus); - } -put_mdio_node: - of_node_put(mdio_np); - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); - return err; -} - -static int gswip_remove(struct platform_device *pdev) -{ - struct gswip_priv *priv = platform_get_drvdata(pdev); - int i; - - if (!priv) - return 0; - - /* disable the switch */ - gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); - - dsa_unregister_switch(priv->ds); - - if (priv->ds->slave_mii_bus) { - mdiobus_unregister(priv->ds->slave_mii_bus); - of_node_put(priv->ds->slave_mii_bus->dev.of_node); - mdiobus_free(priv->ds->slave_mii_bus); - } - - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); - - return 0; -} - -static void gswip_shutdown(struct platform_device *pdev) -{ - struct gswip_priv *priv = platform_get_drvdata(pdev); - - if (!priv) - return; - - dsa_switch_shutdown(priv->ds); - - platform_set_drvdata(pdev, NULL); -} - -static const struct gswip_hw_info gswip_xrx200 = { - .max_ports = 7, - .cpu_port = 6, - .ops = &gswip_xrx200_switch_ops, -}; - -static const struct gswip_hw_info gswip_xrx300 = { - .max_ports = 7, - .cpu_port = 6, - .ops = &gswip_xrx300_switch_ops, -}; - -static const struct of_device_id gswip_of_match[] = { - { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, - { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, - { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, - {}, -}; -MODULE_DEVICE_TABLE(of, gswip_of_match); - -static struct platform_driver gswip_driver = { - .probe = gswip_probe, - .remove = gswip_remove, - .shutdown = gswip_shutdown, - .driver = { - .name = "gswip", - .of_match_table = gswip_of_match, - }, -}; - -module_platform_driver(gswip_driver); - -MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); -MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); -MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 394ca8678d2b..c71d3fd5dfeb 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -1,12 +1,18 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig NET_DSA_MICROCHIP_KSZ_COMMON - tristate "Microchip KSZ8795/KSZ9477/LAN937x series switch support" + tristate "Microchip KSZ8XXX/KSZ9XXX/LAN937X series switch support" depends on NET_DSA select NET_DSA_TAG_KSZ select NET_DSA_TAG_NONE + select NET_IEEE8021Q_HELPERS + select DCB + select PCS_XPCS help - This driver adds support for Microchip KSZ9477 series switch and - KSZ8795/KSZ88x3 switch chips. + This driver adds support for Microchip KSZ8, KSZ9 and + LAN937X series switch chips, being KSZ8863/8873, + KSZ8895/8864, KSZ8794/8795/8765, + KSZ9477/9897/9896/9567/8567, KSZ9893/9563/8563 and + LAN9370/9371/9372/9373/9374. config NET_DSA_MICROCHIP_KSZ9477_I2C tristate "KSZ series I2C connected switch driver" diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile index 48360cc9fc68..9347cfb3d0b5 100644 --- a/drivers/net/dsa/microchip/Makefile +++ b/drivers/net/dsa/microchip/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o -ksz_switch-objs := ksz_common.o -ksz_switch-objs += ksz9477.o -ksz_switch-objs += ksz8795.o +ksz_switch-objs := ksz_common.o ksz_dcb.o +ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o +ksz_switch-objs += ksz8.o ksz_switch-objs += lan937x_main.o ifdef CONFIG_NET_DSA_MICROCHIP_KSZ_PTP diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8.c index 91aba470fb2f..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -1,6 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Microchip KSZ8795 switch driver + * Microchip KSZ8XXX series switch driver + * + * It supports the following switches: + * - KSZ8463 + * - KSZ8863, KSZ8873 aka KSZ88X3 + * - KSZ8895, KSZ8864 aka KSZ8895 family + * - KSZ8794, KSZ8795, KSZ8765 aka KSZ87XX + * Note that it does NOT support: + * - KSZ8563, KSZ8567 - see KSZ9477 driver * * Copyright (C) 2017 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> @@ -23,21 +31,35 @@ #include <linux/phylink.h> #include "ksz_common.h" -#include "ksz8795_reg.h" +#include "ksz8_reg.h" #include "ksz8.h" static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } +/** + * ksz8_ind_write8 - EEE/ACL/PME indirect register write + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @data: The data to be written. + * + * This function performs an indirect register write for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) { const u16 *regs; @@ -49,15 +71,68 @@ static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) mutex_lock(&dev->alu_mutex); ctrl_addr = IND_ACC_TABLE(table) | addr; - ret = ksz_write8(dev, regs[REG_IND_BYTE], data); + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (!ret) + ret = ksz_write8(dev, regs[REG_IND_BYTE], data); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +/** + * ksz8_ind_read8 - EEE/ACL/PME indirect register read + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @val: The value read. + * + * This function performs an indirect register read for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ +static int ksz8_ind_read8(struct ksz_device *dev, u8 table, u16 addr, u8 *val) +{ + const u16 *regs; + u16 ctrl_addr; + int ret = 0; + + regs = dev->info->regs; + + mutex_lock(&dev->alu_mutex); + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); if (!ret) - ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + ret = ksz_read8(dev, regs[REG_IND_BYTE], val); mutex_unlock(&dev->alu_mutex); return ret; } +int ksz8_pme_write8(struct ksz_device *dev, u32 reg, u8 value) +{ + return ksz8_ind_write8(dev, (u8)(reg >> 8), (u8)(reg), value); +} + +int ksz8_pme_pread8(struct ksz_device *dev, int port, int offset, u8 *data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_read8(dev, table, (u8)(offset), data); +} + +int ksz8_pme_pwrite8(struct ksz_device *dev, int port, int offset, u8 data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_write8(dev, table, (u8)(offset), data); +} + int ksz8_reset_switch(struct ksz_device *dev) { if (ksz_is_ksz88x3(dev)) { @@ -66,6 +141,11 @@ int ksz8_reset_switch(struct ksz_device *dev) KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true); ksz_cfg(dev, KSZ8863_REG_SW_RESET, KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false); + } else if (ksz_is_ksz8463(dev)) { + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, true); + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, false); } else { /* reset switch */ ksz_write8(dev, REG_POWER_MANAGEMENT_1, @@ -120,44 +200,86 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return ksz8795_change_mtu(dev, frame_size); - case KSZ8830_CHIP_ID: + case KSZ8463_CHIP_ID: + case KSZ88X3_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return ksz8863_change_mtu(dev, frame_size); } return -EOPNOTSUPP; } -static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue) +static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues) { - u8 hi, lo; + u8 mask_4q, mask_2q; + u8 reg_4q, reg_2q; + u8 data_4q = 0; + u8 data_2q = 0; + int ret; - /* Number of queues can only be 1, 2, or 4. */ - switch (queue) { - case 4: - case 3: - queue = PORT_QUEUE_SPLIT_4; - break; - case 2: - queue = PORT_QUEUE_SPLIT_2; - break; - default: - queue = PORT_QUEUE_SPLIT_1; + if (ksz_is_ksz88x3(dev)) { + mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN; + reg_4q = REG_PORT_CTRL_0; + reg_2q = REG_PORT_CTRL_2; + + /* KSZ8795 family switches have Weighted Fair Queueing (WFQ) + * enabled by default. Enable it for KSZ8873 family switches + * too. Default value for KSZ8873 family is strict priority, + * which should be enabled by using TC_SETUP_QDISC_ETS, not + * by default. + */ + ret = ksz_rmw8(dev, REG_SW_CTRL_3, WEIGHTED_FAIR_QUEUE_ENABLE, + WEIGHTED_FAIR_QUEUE_ENABLE); + if (ret) + return ret; + } else if (ksz_is_ksz8463(dev)) { + mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN; + reg_4q = P1CR1; + reg_2q = P1CR1 + 1; + } else { + mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN; + reg_4q = REG_PORT_CTRL_13; + reg_2q = REG_PORT_CTRL_0; + + /* TODO: this is legacy from initial KSZ8795 driver, should be + * moved to appropriate place in the future. + */ + ret = ksz_rmw8(dev, REG_SW_CTRL_19, + SW_OUT_RATE_LIMIT_QUEUE_BASED, + SW_OUT_RATE_LIMIT_QUEUE_BASED); + if (ret) + return ret; } - ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo); - ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi); - lo &= ~PORT_QUEUE_SPLIT_L; - if (queue & PORT_QUEUE_SPLIT_2) - lo |= PORT_QUEUE_SPLIT_L; - hi &= ~PORT_QUEUE_SPLIT_H; - if (queue & PORT_QUEUE_SPLIT_4) - hi |= PORT_QUEUE_SPLIT_H; - ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo); - ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi); - - /* Default is port based for egress rate limit. */ - if (queue != PORT_QUEUE_SPLIT_1) - ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED, - true); + + if (queues == 4) + data_4q = mask_4q; + else if (queues == 2) + data_2q = mask_2q; + + ret = ksz_prmw8(dev, port, reg_4q, mask_4q, data_4q); + if (ret) + return ret; + + return ksz_prmw8(dev, port, reg_2q, mask_2q, data_2q); +} + +int ksz8_all_queues_split(struct ksz_device *dev, int queues) +{ + struct dsa_switch *ds = dev->ds; + const struct dsa_port *dp; + + dsa_switch_for_each_port(dp, ds) { + int ret = ksz8_port_queue_split(dev, dp->index, queues); + + if (ret) + return ret; + } + + return 0; } void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) @@ -261,6 +383,9 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, addr -= dev->info->reg_mib_cnt; ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 : KSZ8863_MIB_PACKET_DROPPED_RX_0; + if (ksz_is_8895_family(dev) && + ctrl_addr == KSZ8863_MIB_PACKET_DROPPED_RX_0) + ctrl_addr = KSZ8895_MIB_PACKET_DROPPED_RX_0; ctrl_addr += port; ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); @@ -283,7 +408,7 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, u64 *dropped, u64 *cnt) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt); else ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt); @@ -291,7 +416,7 @@ void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) return; /* enable the port for flush/freeze function */ @@ -309,7 +434,8 @@ void ksz8_port_init_cnt(struct ksz_device *dev, int port) struct ksz_port_mib *mib = &dev->ports[port].mib; u64 *dropped; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { /* flush all enabled port MIB counters */ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); @@ -385,39 +511,39 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data) int timeout = 100; const u32 *masks; const u16 *regs; + int ret; masks = dev->info->masks; regs = dev->info->regs; do { - ksz_read8(dev, regs[REG_IND_DATA_CHECK], data); + ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data); + if (ret) + return ret; + timeout--; } while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout); /* Entry is not ready for accessing. */ - if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) { - return -EAGAIN; - /* Entry is ready for accessing. */ - } else { - ksz_read8(dev, regs[REG_IND_DATA_8], data); + if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) + return -ETIMEDOUT; - /* There is no valid entry in the table. */ - if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) - return -ENXIO; - } - return 0; + /* Entry is ready for accessing. */ + return ksz_read8(dev, regs[REG_IND_DATA_8], data); } -int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, - u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries) +static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, + u8 *fid, u8 *src_port, u16 *entries) { u32 data_hi, data_lo; const u8 *shifts; const u32 *masks; const u16 *regs; u16 ctrl_addr; + u64 buf = 0; u8 data; - int rc; + int cnt; + int ret; shifts = dev->info->shifts; masks = dev->info->masks; @@ -426,49 +552,50 @@ int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; mutex_lock(&dev->alu_mutex); - ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (ret) + goto unlock_alu; - rc = ksz8_valid_dyn_entry(dev, &data); - if (rc == -EAGAIN) { - if (addr == 0) - *entries = 0; - } else if (rc == -ENXIO) { + ret = ksz8_valid_dyn_entry(dev, &data); + if (ret) + goto unlock_alu; + + if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) { *entries = 0; - /* At least one valid entry in the table. */ - } else { - u64 buf = 0; - int cnt; - - ksz_read64(dev, regs[REG_IND_DATA_HI], &buf); - data_hi = (u32)(buf >> 32); - data_lo = (u32)buf; - - /* Check out how many valid entry in the table. */ - cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H]; - cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H]; - cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >> - shifts[DYNAMIC_MAC_ENTRIES]; - *entries = cnt + 1; - - *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >> - shifts[DYNAMIC_MAC_FID]; - *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >> - shifts[DYNAMIC_MAC_SRC_PORT]; - *timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >> - shifts[DYNAMIC_MAC_TIMESTAMP]; - - mac_addr[5] = (u8)data_lo; - mac_addr[4] = (u8)(data_lo >> 8); - mac_addr[3] = (u8)(data_lo >> 16); - mac_addr[2] = (u8)(data_lo >> 24); - - mac_addr[1] = (u8)data_hi; - mac_addr[0] = (u8)(data_hi >> 8); - rc = 0; + goto unlock_alu; } + + ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf); + if (ret) + goto unlock_alu; + + data_hi = (u32)(buf >> 32); + data_lo = (u32)buf; + + /* Check out how many valid entry in the table. */ + cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H]; + cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H]; + cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >> + shifts[DYNAMIC_MAC_ENTRIES]; + *entries = cnt + 1; + + *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >> + shifts[DYNAMIC_MAC_FID]; + *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >> + shifts[DYNAMIC_MAC_SRC_PORT]; + + mac_addr[5] = (u8)data_lo; + mac_addr[4] = (u8)(data_lo >> 8); + mac_addr[3] = (u8)(data_lo >> 16); + mac_addr[2] = (u8)(data_lo >> 24); + + mac_addr[1] = (u8)data_hi; + mac_addr[0] = (u8)(data_hi >> 8); + +unlock_alu: mutex_unlock(&dev->alu_mutex); - return rc; + return ret; } static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, @@ -507,11 +634,11 @@ static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, shifts[STATIC_MAC_FWD_PORTS]; alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; - /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + /* KSZ8795/KSZ8895 family switches have STATIC_MAC_TABLE_USE_FID and * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the * static MAC table compared to doing write. */ - if (ksz_is_ksz87xx(dev)) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) data_hi >>= 1; alu->is_static = true; alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; @@ -632,59 +759,217 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) ksz8_w_table(dev, TABLE_VLAN, addr, buf); } +/** + * ksz879x_get_loopback - KSZ879x specific function to get loopback + * configuration status for a specific port + * @dev: Pointer to the device structure + * @port: Port number to query + * @val: Pointer to store the result + * + * This function reads the SMI registers to determine whether loopback mode + * is enabled for a specific port. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_get_loopback(struct ksz_device *dev, u16 port, + u16 *val) +{ + u8 stat3; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_3, &stat3); + if (ret) + return ret; + + if (stat3 & PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + return 0; +} + +/** + * ksz879x_set_loopback - KSZ879x specific function to set loopback mode for + * a specific port + * @dev: Pointer to the device structure. + * @port: Port number to modify. + * @val: Value indicating whether to enable or disable loopback mode. + * + * This function translates loopback bit of the BMCR register into the + * corresponding hardware register bit value and writes it to the SMI interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_set_loopback(struct ksz_device *dev, u16 port, u16 val) +{ + u8 stat3 = 0; + + if (val & BMCR_LOOPBACK) + stat3 |= PORT_PHY_LOOPBACK; + + return ksz_prmw8(dev, port, REG_PORT_STATUS_3, PORT_PHY_LOOPBACK, + stat3); +} + +/** + * ksz8_r_phy_ctrl - Translates and reads from the SMI interface to a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Control + * register. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 reg_val; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_LINK_STATUS], ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_MDIX_STATUS) + *val |= KSZ886X_CTRL_MDIX_STAT; + + ret = ksz_pread8(dev, port, REG_PORT_LINK_MD_CTRL, ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_FORCE_LINK) + *val |= KSZ886X_CTRL_FORCE_LINK; + + if (reg_val & PORT_POWER_SAVING) + *val |= KSZ886X_CTRL_PWRSAVE; + + if (reg_val & PORT_PHY_REMOTE_LOOPBACK) + *val |= KSZ886X_CTRL_REMOTE_LOOPBACK; + + return 0; +} + +/** + * ksz8_r_phy_bmcr - Translates and reads from the SMI interface to a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Basic + * mode control register. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_bmcr(struct ksz_device *dev, u16 port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 restart, speed, ctrl; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + if (ctrl & PORT_FORCE_100_MBIT) + *val |= BMCR_SPEED100; + + if (ksz_is_ksz88x3(dev)) { + if (restart & KSZ8873_PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + if ((ctrl & PORT_AUTO_NEG_ENABLE)) + *val |= BMCR_ANENABLE; + } else { + ret = ksz879x_get_loopback(dev, port, val); + if (ret) + return ret; + + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + *val |= BMCR_ANENABLE; + } + + if (restart & PORT_POWER_DOWN) + *val |= BMCR_PDOWN; + + if (restart & PORT_AUTO_NEG_RESTART) + *val |= BMCR_ANRESTART; + + if (ctrl & PORT_FORCE_FULL_DUPLEX) + *val |= BMCR_FULLDPLX; + + if (speed & PORT_HP_MDIX) + *val |= KSZ886X_BMCR_HP_MDIX; + + if (restart & PORT_FORCE_MDIX) + *val |= KSZ886X_BMCR_FORCE_MDI; + + if (restart & PORT_AUTO_MDIX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; + + if (restart & PORT_TX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_TRANSMIT; + + if (restart & PORT_LED_OFF) + *val |= KSZ886X_BMCR_DISABLE_LED; + + return 0; +} + int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) { - u8 restart, speed, ctrl, link; + u8 ctrl, link, val1, val2; int processed = true; const u16 *regs; - u8 val1, val2; u16 data = 0; - u8 p = phy; + u16 p = phy; int ret; regs = dev->info->regs; switch (reg) { case MII_BMCR: - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); - if (ret) - return ret; - - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); + ret = ksz8_r_phy_bmcr(dev, p, &data); if (ret) return ret; - - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); - if (ret) - return ret; - - if (restart & PORT_PHY_LOOPBACK) - data |= BMCR_LOOPBACK; - if (ctrl & PORT_FORCE_100_MBIT) - data |= BMCR_SPEED100; - if (ksz_is_ksz88x3(dev)) { - if ((ctrl & PORT_AUTO_NEG_ENABLE)) - data |= BMCR_ANENABLE; - } else { - if (!(ctrl & PORT_AUTO_NEG_DISABLE)) - data |= BMCR_ANENABLE; - } - if (restart & PORT_POWER_DOWN) - data |= BMCR_PDOWN; - if (restart & PORT_AUTO_NEG_RESTART) - data |= BMCR_ANRESTART; - if (ctrl & PORT_FORCE_FULL_DUPLEX) - data |= BMCR_FULLDPLX; - if (speed & PORT_HP_MDIX) - data |= KSZ886X_BMCR_HP_MDIX; - if (restart & PORT_FORCE_MDIX) - data |= KSZ886X_BMCR_FORCE_MDI; - if (restart & PORT_AUTO_MDIX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; - if (restart & PORT_TX_DISABLE) - data |= KSZ886X_BMCR_DISABLE_TRANSMIT; - if (restart & PORT_LED_OFF) - data |= KSZ886X_BMCR_DISABLE_LED; break; case MII_BMSR: ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); @@ -769,12 +1054,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2)); break; case PHY_REG_PHY_CTRL: - ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); + ret = ksz8_r_phy_ctrl(dev, p, &data); if (ret) return ret; - if (link & PORT_MDIX_STATUS) - data |= KSZ886X_CTRL_MDIX_STAT; break; default: processed = false; @@ -786,113 +1069,169 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) return 0; } -int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +/** + * ksz8_w_phy_ctrl - Translates and writes to the SMI interface from a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Control register + * into their corresponding hardware register bit values for the SMI + * interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val) { - u8 restart, speed, ctrl, data; - const u16 *regs; - u8 p = phy; + u8 reg_val = 0; int ret; - regs = dev->info->regs; + if (val & KSZ886X_CTRL_FORCE_LINK) + reg_val |= PORT_FORCE_LINK; - switch (reg) { - case MII_BMCR: + if (val & KSZ886X_CTRL_PWRSAVE) + reg_val |= PORT_POWER_SAVING; - /* Do not support PHY reset function. */ - if (val & BMCR_RESET) - break; - ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); - if (ret) - return ret; + if (val & KSZ886X_CTRL_REMOTE_LOOPBACK) + reg_val |= PORT_PHY_REMOTE_LOOPBACK; - data = speed; - if (val & KSZ886X_BMCR_HP_MDIX) - data |= PORT_HP_MDIX; - else - data &= ~PORT_HP_MDIX; + ret = ksz_prmw8(dev, port, REG_PORT_LINK_MD_CTRL, PORT_FORCE_LINK | + PORT_POWER_SAVING | PORT_PHY_REMOTE_LOOPBACK, reg_val); + return ret; +} - if (data != speed) { - ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data); - if (ret) - return ret; - } +/** + * ksz8_w_phy_bmcr - Translates and writes to the SMI interface from a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Basic mode control + * register into their corresponding hardware register bit values for the SMI + * interface. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_bmcr(struct ksz_device *dev, u16 port, u16 val) +{ + u8 restart, speed, ctrl, restart_mask; + const u16 *regs = dev->info->regs; + int ret; - ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); - if (ret) - return ret; + /* Do not support PHY reset function. */ + if (val & BMCR_RESET) + return 0; - data = ctrl; - if (ksz_is_ksz88x3(dev)) { - if ((val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_ENABLE; - else - data &= ~PORT_AUTO_NEG_ENABLE; - } else { - if (!(val & BMCR_ANENABLE)) - data |= PORT_AUTO_NEG_DISABLE; - else - data &= ~PORT_AUTO_NEG_DISABLE; - - /* Fiber port does not support auto-negotiation. */ - if (dev->ports[p].fiber) - data |= PORT_AUTO_NEG_DISABLE; - } + speed = 0; + if (val & KSZ886X_BMCR_HP_MDIX) + speed |= PORT_HP_MDIX; - if (val & BMCR_SPEED100) - data |= PORT_FORCE_100_MBIT; - else - data &= ~PORT_FORCE_100_MBIT; - if (val & BMCR_FULLDPLX) - data |= PORT_FORCE_FULL_DUPLEX; - else - data &= ~PORT_FORCE_FULL_DUPLEX; + ret = ksz_prmw8(dev, port, regs[P_SPEED_STATUS], PORT_HP_MDIX, speed); + if (ret) + return ret; - if (data != ctrl) { - ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data); - if (ret) - return ret; - } + ctrl = 0; + if (ksz_is_ksz88x3(dev)) { + if ((val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_ENABLE; + } else { + if (!(val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_DISABLE; + + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[port].fiber) + ctrl |= PORT_AUTO_NEG_DISABLE; + } + + if (val & BMCR_SPEED100) + ctrl |= PORT_FORCE_100_MBIT; + + if (val & BMCR_FULLDPLX) + ctrl |= PORT_FORCE_FULL_DUPLEX; + + ret = ksz_prmw8(dev, port, regs[P_FORCE_CTRL], PORT_FORCE_100_MBIT | + /* PORT_AUTO_NEG_ENABLE and PORT_AUTO_NEG_DISABLE are the same + * bits + */ + PORT_FORCE_FULL_DUPLEX | PORT_AUTO_NEG_ENABLE, ctrl); + if (ret) + return ret; + + restart = 0; + restart_mask = PORT_LED_OFF | PORT_TX_DISABLE | PORT_AUTO_NEG_RESTART | + PORT_POWER_DOWN | PORT_AUTO_MDIX_DISABLE | PORT_FORCE_MDIX; + + if (val & KSZ886X_BMCR_DISABLE_LED) + restart |= PORT_LED_OFF; + + if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) + restart |= PORT_TX_DISABLE; + + if (val & BMCR_ANRESTART) + restart |= PORT_AUTO_NEG_RESTART; + + if (val & BMCR_PDOWN) + restart |= PORT_POWER_DOWN; + + if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) + restart |= PORT_AUTO_MDIX_DISABLE; - ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + if (val & KSZ886X_BMCR_FORCE_MDI) + restart |= PORT_FORCE_MDIX; + + if (ksz_is_ksz88x3(dev)) { + restart_mask |= KSZ8873_PORT_PHY_LOOPBACK; + + if (val & BMCR_LOOPBACK) + restart |= KSZ8873_PORT_PHY_LOOPBACK; + } else { + ret = ksz879x_set_loopback(dev, port, val); if (ret) return ret; + } - data = restart; - if (val & KSZ886X_BMCR_DISABLE_LED) - data |= PORT_LED_OFF; - else - data &= ~PORT_LED_OFF; - if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) - data |= PORT_TX_DISABLE; - else - data &= ~PORT_TX_DISABLE; - if (val & BMCR_ANRESTART) - data |= PORT_AUTO_NEG_RESTART; - else - data &= ~(PORT_AUTO_NEG_RESTART); - if (val & BMCR_PDOWN) - data |= PORT_POWER_DOWN; - else - data &= ~PORT_POWER_DOWN; - if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) - data |= PORT_AUTO_MDIX_DISABLE; - else - data &= ~PORT_AUTO_MDIX_DISABLE; - if (val & KSZ886X_BMCR_FORCE_MDI) - data |= PORT_FORCE_MDIX; - else - data &= ~PORT_FORCE_MDIX; - if (val & BMCR_LOOPBACK) - data |= PORT_PHY_LOOPBACK; - else - data &= ~PORT_PHY_LOOPBACK; + return ksz_prmw8(dev, port, regs[P_NEG_RESTART_CTRL], restart_mask, + restart); +} - if (data != restart) { - ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], - data); - if (ret) - return ret; - } +int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + const u16 *regs; + u8 ctrl, data; + u16 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + ret = ksz8_w_phy_bmcr(dev, p, val); + if (ret) + return ret; break; case MII_ADVERTISE: ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); @@ -926,6 +1265,12 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) if (val & PHY_START_CABLE_DIAG) ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true); break; + + case PHY_REG_PHY_CTRL: + ret = ksz8_w_phy_ctrl(dev, p, val); + if (ret) + return ret; + break; default: break; } @@ -935,12 +1280,15 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member) { + int offset = P_MIRROR_CTRL; u8 data; - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); - data &= ~PORT_VLAN_MEMBERSHIP; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_pread8(dev, port, offset, &data); + data &= ~dev->port_mask; data |= (member & dev->port_mask); - ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); + ksz_pwrite8(dev, port, offset, data); } void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) @@ -948,6 +1296,8 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) u8 learn[DSA_MAX_PORTS]; int first, index, cnt; const u16 *regs; + int reg = S_FLUSH_TABLE_CTRL; + int mask = SW_FLUSH_DYN_MAC_TABLE; regs = dev->info->regs; @@ -965,7 +1315,11 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index] | PORT_LEARN_DISABLE); } - ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + if (ksz_is_ksz8463(dev)) { + reg = KSZ8463_FLUSH_TABLE_CTRL; + mask = KSZ8463_FLUSH_DYN_MAC_TABLE; + } + ksz_cfg(dev, reg, mask, true); for (index = first; index < cnt; index++) { if (!(learn[index] & PORT_LEARN_DISABLE)) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]); @@ -975,28 +1329,28 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) int ksz8_fdb_dump(struct ksz_device *dev, int port, dsa_fdb_dump_cb_t *cb, void *data) { - int ret = 0; - u16 i = 0; - u16 entries = 0; - u8 timestamp = 0; - u8 fid; - u8 src_port; u8 mac[ETH_ALEN]; + u8 src_port, fid; + u16 entries = 0; + int ret, i; - do { + for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) { ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port, - ×tamp, &entries); - if (!ret && port == src_port) { + &entries); + if (ret) + return ret; + + if (i >= entries) + return 0; + + if (port == src_port) { ret = cb(mac, fid, false, data); if (ret) - break; + return ret; } - i++; - } while (i < entries); - if (i >= entries) - ret = 0; + } - return ret; + return 0; } static int ksz8_add_sta_mac(struct ksz_device *dev, int port, @@ -1104,7 +1458,7 @@ int ksz8_fdb_del(struct ksz_device *dev, int port, const unsigned char *addr, int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, struct netlink_ext_ack *extack) { - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* Discard packets with VID not enabled on the switch */ @@ -1120,9 +1474,12 @@ int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state) { - if (ksz_is_ksz88x3(dev)) { - ksz_cfg(dev, REG_SW_INSERT_SRC_PVID, - 0x03 << (4 - 2 * port), state); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { + int reg = REG_SW_INSERT_SRC_PVID; + + if (ksz_is_ksz8463(dev)) + reg = KSZ8463_REG_SW_CTRL_9; + ksz_cfg(dev, reg, 0x03 << (4 - 2 * port), state); } else { ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00); } @@ -1137,7 +1494,7 @@ int ksz8_port_vlan_add(struct ksz_device *dev, int port, u16 data, new_pvid = 0; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* If a VLAN is added with untagged flag different from the @@ -1206,7 +1563,7 @@ int ksz8_port_vlan_del(struct ksz_device *dev, int port, u16 data, pvid; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); @@ -1236,19 +1593,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress, struct netlink_ext_ack *extack) { + int offset = P_MIRROR_CTRL; + + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, true); dev->mirror_rx |= BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, true); dev->mirror_tx |= BIT(port); } - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_SNIFFER, false); /* configure mirror port */ if (dev->mirror_rx || dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, true); return 0; @@ -1257,20 +1618,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, void ksz8_port_mirror_del(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror) { + int offset = P_MIRROR_CTRL; u8 data; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (mirror->ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, false); dev->mirror_rx &= ~BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, false); dev->mirror_tx &= ~BIT(port); } - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + ksz_pread8(dev, port, offset, &data); if (!dev->mirror_rx && !dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, false); } @@ -1278,6 +1642,9 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) { struct ksz_port *p = &dev->ports[port]; + if (!ksz_is_ksz87xx(dev)) + return; + if (!p->interface && dev->compat_interface) { dev_warn(dev->dev, "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " @@ -1289,38 +1656,57 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) { + const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; const u32 *masks; + int offset; u8 member; masks = dev->info->masks; /* enable broadcast storm limit */ - ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - - if (!ksz_is_ksz88x3(dev)) - ksz8795_set_prio_queue(dev, port, 4); + offset = P_BCAST_STORM_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR1; + ksz_port_cfg(dev, port, offset, PORT_BROADCAST_STORM, true); - /* disable DiffServ priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false); + ksz8_port_queue_split(dev, port, dev->info->num_tx_queues); /* replace priority */ - ksz_port_cfg(dev, port, P_802_1P_CTRL, + offset = P_802_1P_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_port_cfg(dev, port, offset, masks[PORT_802_1P_REMAPPING], false); - /* enable 802.1p priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); - - if (cpu_port) { - if (!ksz_is_ksz88x3(dev)) - ksz8795_cpu_interface_select(dev, port); - + if (cpu_port) member = dsa_user_ports(ds); - } else { + else member = BIT(dsa_upstream_port(ds, port)); - } ksz8_cfg_port_member(dev, port, member); + + /* Disable all WoL options by default. Otherwise + * ksz_switch_macaddr_get/put logic will not work properly. + * CPU port 4 has no WoL functionality. + */ + if (ksz_is_ksz87xx(dev) && !cpu_port) + ksz8_pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], 0); +} + +static void ksz88x3_config_rmii_clk(struct ksz_device *dev) +{ + struct dsa_port *cpu_dp = dsa_to_port(dev->ds, dev->cpu_port); + bool rmii_clk_internal; + + if (!ksz_is_ksz88x3(dev)) + return; + + rmii_clk_internal = of_property_read_bool(cpu_dp->dn, + "microchip,rmii-clk-internal"); + + ksz_cfg(dev, KSZ88X3_REG_FVID_AND_HOST_MODE, + KSZ88X3_PORT3_RMII_CLK_INTERNAL, rmii_clk_internal); } void ksz8_config_cpu_port(struct dsa_switch *ds) @@ -1330,6 +1716,7 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) const u32 *masks; const u16 *regs; u8 remote; + u8 fiber_ports = 0; int i; masks = dev->info->masks; @@ -1339,13 +1726,17 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) ksz8_port_setup(dev, dev->cpu_port, true); + ksz8795_cpu_interface_select(dev, dev->cpu_port); + ksz88x3_config_rmii_clk(dev); + for (i = 0; i < dev->phy_port_cnt; i++) { ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); } for (i = 0; i < dev->phy_port_cnt; i++) { p = &dev->ports[i]; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote); if (remote & KSZ8_PORT_FIBER_MODE) p->fiber = 1; @@ -1356,9 +1747,160 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) else ksz_port_cfg(dev, i, regs[P_STP_CTRL], PORT_FORCE_FLOW_CTRL, false); + if (p->fiber) + fiber_ports |= (1 << i); + } + if (ksz_is_ksz8463(dev)) { + /* Setup fiber ports. */ + if (fiber_ports) { + fiber_ports &= 3; + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_CFG_CTRL, + fiber_ports << PORT_COPPER_MODE_S, + 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_DSP_CTRL_6, + COPPER_RECEIVE_ADJUSTMENT, 0); + } + + /* Turn off PTP function as the switch's proprietary way of + * handling timestamp is not supported in current Linux PTP + * stack implementation. + */ + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_MSG_CONF1, + PTP_ENABLE, 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_CLK_CTRL, + PTP_CLK_ENABLE, 0); } } +/** + * ksz8_phy_port_link_up - Configures ports with integrated PHYs + * @dev: The KSZ device instance. + * @port: The port number to configure. + * @duplex: The desired duplex mode. + * @tx_pause: If true, enables transmit pause. + * @rx_pause: If true, enables receive pause. + * + * Description: + * The function configures flow control settings for a given port based on the + * desired settings and current duplex mode. + * + * According to the KSZ8873 datasheet, the PORT_FORCE_FLOW_CTRL bit in the + * Port Control 2 register (0x1A for Port 1, 0x22 for Port 2, 0x32 for Port 3) + * determines how flow control is handled on the port: + * "1 = will always enable full-duplex flow control on the port, regardless + * of AN result. + * 0 = full-duplex flow control is enabled based on AN result." + * + * This means that the flow control behavior depends on the state of this bit: + * - If PORT_FORCE_FLOW_CTRL is set to 1, the switch will ignore AN results and + * force flow control on the port. + * - If PORT_FORCE_FLOW_CTRL is set to 0, the switch will enable or disable + * flow control based on the AN results. + * + * However, there is a potential limitation in this configuration. It is + * currently not possible to force disable flow control on a port if we still + * advertise pause support. While such a configuration is not currently + * supported by Linux, and may not make practical sense, it's important to be + * aware of this limitation when working with the KSZ8873 and similar devices. + */ +static void ksz8_phy_port_link_up(struct ksz_device *dev, int port, int duplex, + bool tx_pause, bool rx_pause) +{ + const u16 *regs = dev->info->regs; + u8 sctrl = 0; + + /* The KSZ8795 switch differs from the KSZ8873 by supporting + * asymmetric pause control. However, since a single bit is used to + * control both RX and TX pause, we can't enforce asymmetric pause + * control - both TX and RX pause will be either enabled or disabled + * together. + * + * If auto-negotiation is enabled, we usually allow the flow control to + * be determined by the auto-negotiation process based on the + * capabilities of both link partners. However, for KSZ8873, the + * PORT_FORCE_FLOW_CTRL bit may be set by the hardware bootstrap, + * ignoring the auto-negotiation result. Thus, even in auto-negotiation + * mode, we need to ensure that the PORT_FORCE_FLOW_CTRL bit is + * properly cleared. + * + * In the absence of pause auto-negotiation, we will enforce symmetric + * pause control for both variants of switches - KSZ8873 and KSZ8795. + * + * Autoneg Pause Autoneg rx,tx PORT_FORCE_FLOW_CTRL + * 1 1 x 0 + * 0 1 x 0 (flow control probably disabled) + * x 0 1 1 (flow control force enabled) + * 1 0 0 0 (flow control still depends on + * aneg result due to hardware) + * 0 0 0 0 (flow control probably disabled) + */ + if (dev->ports[port].manual_flow && tx_pause) + sctrl |= PORT_FORCE_FLOW_CTRL; + + ksz_prmw8(dev, port, regs[P_STP_CTRL], PORT_FORCE_FLOW_CTRL, sctrl); +} + +/** + * ksz8_cpu_port_link_up - Configures the CPU port of the switch. + * @dev: The KSZ device instance. + * @speed: The desired link speed. + * @duplex: The desired duplex mode. + * @tx_pause: If true, enables transmit pause. + * @rx_pause: If true, enables receive pause. + * + * Description: + * The function configures flow control and speed settings for the CPU + * port of the switch based on the desired settings, current duplex mode, and + * speed. + */ +static void ksz8_cpu_port_link_up(struct ksz_device *dev, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + const u16 *regs = dev->info->regs; + u8 ctrl = 0; + + /* SW_FLOW_CTRL, SW_HALF_DUPLEX, and SW_10_MBIT bits are bootstrappable + * at least on KSZ8873. They can have different values depending on your + * board setup. + */ + if (tx_pause || rx_pause) + ctrl |= SW_FLOW_CTRL; + + if (duplex == DUPLEX_HALF) + ctrl |= SW_HALF_DUPLEX; + + /* This hardware only supports SPEED_10 and SPEED_100. For SPEED_10 + * we need to set the SW_10_MBIT bit. Otherwise, we can leave it 0. + */ + if (speed == SPEED_10) + ctrl |= SW_10_MBIT; + + ksz_rmw8(dev, regs[S_BROADCAST_CTRL], SW_HALF_DUPLEX | SW_FLOW_CTRL | + SW_10_MBIT, ctrl); +} + +void ksz8_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; + + /* If the port is the CPU port, apply special handling. Only the CPU + * port is configured via global registers. + */ + if (dev->cpu_port == port) + ksz8_cpu_port_link_up(dev, speed, duplex, tx_pause, rx_pause); + else if (dev->info->internal_phy[port]) + ksz8_phy_port_link_up(dev, port, duplex, tx_pause, rx_pause); +} + static int ksz8_handle_global_errata(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; @@ -1393,7 +1935,8 @@ int ksz8_enable_stp_addr(struct ksz_device *dev) int ksz8_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; - int i; + const u16 *regs = dev->info->regs; + int i, ret = 0; ds->mtu_enforcement_ingress = true; @@ -1407,34 +1950,49 @@ int ksz8_setup(struct dsa_switch *ds) */ ds->vlan_filtering_is_global = true; - ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true); - /* Enable automatic fast aging when link changed detected. */ ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); - if (!ksz_is_ksz88x3(dev)) + if (!ksz_is_ksz88x3(dev) && !ksz_is_ksz8463(dev)) ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true); for (i = 0; i < (dev->info->num_vlans / 4); i++) ksz8_r_vlan_entries(dev, i); - return ksz8_handle_global_errata(ds); + /* Make sure PME (WoL) is not enabled. If requested, it will + * be enabled by ksz_wol_pre_shutdown(). Otherwise, some PMICs + * do not like PME events changes before shutdown. PME only + * available on KSZ87xx family. + */ + if (ksz_is_ksz87xx(dev)) { + ret = ksz8_pme_write8(dev, regs[REG_SW_PME_CTRL], 0); + if (!ret) + ret = ksz_rmw8(dev, REG_INT_ENABLE, INT_PME, 0); + } + + if (!ret) + return ksz8_handle_global_errata(ds); + else + return ret; } void ksz8_get_caps(struct ksz_device *dev, int port, @@ -1460,6 +2018,84 @@ u32 ksz8_get_port_addr(int port, int offset) return PORT_CTRL_ADDR(port, offset); } +u32 ksz8463_get_port_addr(int port, int offset) +{ + return offset + 0x18 * port; +} + +static u16 ksz8463_get_phy_addr(u16 phy, u16 reg, u16 offset) +{ + return offset + reg * 2 + phy * (P2MBCR - P1MBCR); +} + +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u16 sw_reg = 0; + u16 data = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + switch (reg) { + case MII_PHYSID1: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1IHR); + break; + case MII_PHYSID2: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1ILR); + break; + case MII_BMCR: + case MII_BMSR: + case MII_ADVERTISE: + case MII_LPA: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + case MII_TPISTATUS: + /* This register holds the PHY interrupt status for simulated + * Micrel KSZ PHY. + */ + data = 0x0505; + break; + default: + break; + } + if (sw_reg) { + ret = ksz_read16(dev, sw_reg, &data); + if (ret) + return ret; + } + *val = data; + + return 0; +} + +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u16 sw_reg = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + + /* No write to fiber port. */ + if (dev->ports[phy].fiber) + return 0; + switch (reg) { + case MII_BMCR: + case MII_ADVERTISE: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + default: + break; + } + if (sw_reg) { + ret = ksz_write16(dev, sw_reg, val); + if (ret) + return ret; + } + + return 0; +} + int ksz8_switch_init(struct ksz_device *dev) { dev->cpu_port = fls(dev->info->cpu_ports) - 1; diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h index 4cea811e73ac..0f2cd1474b44 100644 --- a/drivers/net/dsa/microchip/ksz8.h +++ b/drivers/net/dsa/microchip/ksz8.h @@ -19,8 +19,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port); void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port); int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val); -int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, - u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries); void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt); void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, u64 *dropped, u64 *cnt); @@ -56,5 +54,17 @@ int ksz8_reset_switch(struct ksz_device *dev); int ksz8_switch_init(struct ksz_device *dev); void ksz8_switch_exit(struct ksz_device *dev); int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu); +int ksz8_pme_write8(struct ksz_device *dev, u32 reg, u8 value); +int ksz8_pme_pread8(struct ksz_device *dev, int port, int offset, u8 *data); +int ksz8_pme_pwrite8(struct ksz_device *dev, int port, int offset, u8 data); +void ksz8_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause); +int ksz8_all_queues_split(struct ksz_device *dev, int queues); + +u32 ksz8463_get_port_addr(int port, int offset); +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val); #endif diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c index 5711a59e2ac9..a8bfcd917bf7 100644 --- a/drivers/net/dsa/microchip/ksz8863_smi.c +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -199,11 +199,11 @@ static void ksz8863_smi_shutdown(struct mdio_device *mdiodev) static const struct of_device_id ksz8863_dt_ids[] = { { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { }, }; diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8_reg.h index 7a57c6088f80..332408567b47 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8_reg.h @@ -1,13 +1,18 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* - * Microchip KSZ8795 register definitions + * Microchip KSZ8XXX series register definitions + * + * The base for these definitions is KSZ8795 but unless indicated + * differently by their prefix, they apply to all KSZ8 series + * devices. Registers and masks that do change are defined in + * dedicated structures in ksz_common.c. * * Copyright (c) 2017 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> */ -#ifndef __KSZ8795_REG_H -#define __KSZ8795_REG_H +#ifndef __KSZ8_REG_H +#define __KSZ8_REG_H #define KS_PORT_M 0x1F @@ -22,6 +27,9 @@ #define KSZ8863_GLOBAL_SOFTWARE_RESET BIT(4) #define KSZ8863_PCS_RESET BIT(0) +#define KSZ88X3_REG_FVID_AND_HOST_MODE 0xC6 +#define KSZ88X3_PORT3_RMII_CLK_INTERNAL BIT(3) + #define REG_SW_CTRL_0 0x02 #define SW_NEW_BACKOFF BIT(7) @@ -121,7 +129,8 @@ #define PORT_BASED_PRIO_3 3 #define PORT_INSERT_TAG BIT(2) #define PORT_REMOVE_TAG BIT(1) -#define PORT_QUEUE_SPLIT_L BIT(0) +#define KSZ8795_PORT_2QUEUE_SPLIT_EN BIT(0) +#define KSZ8873_PORT_4QUEUE_SPLIT_EN BIT(0) #define REG_PORT_1_CTRL_1 0x11 #define REG_PORT_2_CTRL_1 0x21 @@ -140,6 +149,7 @@ #define REG_PORT_4_CTRL_2 0x42 #define REG_PORT_5_CTRL_2 0x52 +#define KSZ8873_PORT_2QUEUE_SPLIT_EN BIT(7) #define PORT_INGRESS_FILTER BIT(6) #define PORT_DISCARD_NON_VID BIT(5) #define PORT_FORCE_FLOW_CTRL BIT(4) @@ -262,6 +272,7 @@ #define PORT_AUTO_MDIX_DISABLE BIT(2) #define PORT_FORCE_MDIX BIT(1) #define PORT_MAC_LOOPBACK BIT(0) +#define KSZ8873_PORT_PHY_LOOPBACK BIT(0) #define REG_PORT_1_STATUS_2 0x1E #define REG_PORT_2_STATUS_2 0x2E @@ -323,13 +334,6 @@ ((addr) + REG_PORT_1_CTRL_0 + (port) * \ (REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0)) -#define REG_SW_MAC_ADDR_0 0x68 -#define REG_SW_MAC_ADDR_1 0x69 -#define REG_SW_MAC_ADDR_2 0x6A -#define REG_SW_MAC_ADDR_3 0x6B -#define REG_SW_MAC_ADDR_4 0x6C -#define REG_SW_MAC_ADDR_5 0x6D - #define TABLE_EXT_SELECT_S 5 #define TABLE_EEE_V 1 #define TABLE_ACL_V 2 @@ -360,8 +364,6 @@ #define REG_IND_DATA_1 0x77 #define REG_IND_DATA_0 0x78 -#define REG_IND_DATA_PME_EEE_ACL 0xA0 - #define REG_INT_STATUS 0x7C #define REG_INT_ENABLE 0x7D @@ -442,20 +444,6 @@ #define TOS_PRIO_M KS_PRIO_M #define TOS_PRIO_S KS_PRIO_S -#define REG_SW_CTRL_20 0xA3 - -#define SW_GMII_DRIVE_STRENGTH_S 4 -#define SW_DRIVE_STRENGTH_M 0x7 -#define SW_DRIVE_STRENGTH_2MA 0 -#define SW_DRIVE_STRENGTH_4MA 1 -#define SW_DRIVE_STRENGTH_8MA 2 -#define SW_DRIVE_STRENGTH_12MA 3 -#define SW_DRIVE_STRENGTH_16MA 4 -#define SW_DRIVE_STRENGTH_20MA 5 -#define SW_DRIVE_STRENGTH_24MA 6 -#define SW_DRIVE_STRENGTH_28MA 7 -#define SW_MII_DRIVE_STRENGTH_S 0 - #define REG_SW_CTRL_21 0xA4 #define SW_IPV6_MLD_OPTION BIT(3) @@ -480,10 +468,7 @@ #define REG_PORT_4_CTRL_13 0xE1 #define REG_PORT_5_CTRL_13 0xF1 -#define PORT_QUEUE_SPLIT_H BIT(1) -#define PORT_QUEUE_SPLIT_1 0 -#define PORT_QUEUE_SPLIT_2 1 -#define PORT_QUEUE_SPLIT_4 2 +#define KSZ8795_PORT_4QUEUE_SPLIT_EN BIT(1) #define PORT_DROP_TAG BIT(0) #define REG_PORT_1_CTRL_14 0xB2 @@ -722,8 +707,6 @@ #define KSZ8795_ID_LO 0x1550 #define KSZ8863_ID_LO 0x1430 -#define KSZ8795_SW_ID 0x8795 - #define PHY_REG_LINK_MD 0x1D #define PHY_START_CABLE_DIAG BIT(15) @@ -746,6 +729,55 @@ #define PHY_POWER_SAVING_ENABLE BIT(2) #define PHY_REMOTE_LOOPBACK BIT(1) +/* KSZ8463 specific registers. */ +#define P1MBCR 0x4C +#define P1MBSR 0x4E +#define PHY1ILR 0x50 +#define PHY1IHR 0x52 +#define P1ANAR 0x54 +#define P1ANLPR 0x56 +#define P2MBCR 0x58 +#define P2MBSR 0x5A +#define PHY2ILR 0x5C +#define PHY2IHR 0x5E +#define P2ANAR 0x60 +#define P2ANLPR 0x62 + +#define P1CR1 0x6C +#define P1CR2 0x6E +#define P1CR3 0x72 +#define P1CR4 0x7E +#define P1SR 0x80 + +#define KSZ8463_FLUSH_TABLE_CTRL 0xAD + +#define KSZ8463_FLUSH_DYN_MAC_TABLE BIT(2) +#define KSZ8463_FLUSH_STA_MAC_TABLE BIT(1) + +#define KSZ8463_REG_SW_CTRL_9 0xAE + +#define KSZ8463_REG_CFG_CTRL 0xD8 + +#define PORT_2_COPPER_MODE BIT(7) +#define PORT_1_COPPER_MODE BIT(6) +#define PORT_COPPER_MODE_S 6 + +#define KSZ8463_REG_SW_RESET 0x126 + +#define KSZ8463_GLOBAL_SOFTWARE_RESET BIT(0) + +#define KSZ8463_PTP_CLK_CTRL 0x600 + +#define PTP_CLK_ENABLE BIT(1) + +#define KSZ8463_PTP_MSG_CONF1 0x620 + +#define PTP_ENABLE BIT(6) + +#define KSZ8463_REG_DSP_CTRL_6 0x734 + +#define COPPER_RECEIVE_ADJUSTMENT BIT(13) + /* Chip resource */ #define PRIO_QUEUES 4 @@ -801,7 +833,9 @@ #define KSZ8795_MIB_TOTAL_TX_1 0x105 #define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100 -#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105 +#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x103 + +#define KSZ8895_MIB_PACKET_DROPPED_RX_0 0x105 #define MIB_PACKET_DROPPED 0x0000FFFF @@ -811,5 +845,6 @@ #define TAIL_TAG_LOOKUP BIT(7) #define FID_ENTRIES 128 +#define KSZ8_DYN_MAC_ENTRIES 1024 #endif diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 83b7f2d5c1ea..5facffbb9c9a 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/kernel.h> @@ -161,6 +161,190 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 10, 1000); } +static void port_sgmii_s(struct ksz_device *dev, uint port, u16 devid, u16 reg) +{ + u32 data; + + data = (devid & MII_MMD_CTRL_DEVAD_MASK) << 16; + data |= reg; + ksz_pwrite32(dev, port, REG_PORT_SGMII_ADDR__4, data); +} + +static void port_sgmii_r(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 *buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pread16(dev, port, REG_PORT_SGMII_DATA__4 + 2, buf); +} + +static void port_sgmii_w(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pwrite32(dev, port, REG_PORT_SGMII_DATA__4, buf); +} + +static int ksz9477_pcs_read(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + u16 val; + + port_sgmii_r(dev, port, mmd, reg, &val); + + /* Simulate a value to activate special code in the XPCS driver if + * supported. + */ + if (mmd == MDIO_MMD_PMAPMD) { + if (reg == MDIO_DEVID1) + val = 0x9477; + else if (reg == MDIO_DEVID2) + val = 0x22 << 10; + } else if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + /* Need to update MII_BMCR register with the exact speed and + * duplex mode when running in SGMII mode and this register is + * used to detect connected speed in that mode. + */ + if (reg == MMD_SR_MII_AUTO_NEG_STATUS) { + int duplex, speed; + + if (val & SR_MII_STAT_LINK_UP) { + speed = (val >> SR_MII_STAT_S) & SR_MII_STAT_M; + if (speed == SR_MII_STAT_1000_MBPS) + speed = SPEED_1000; + else if (speed == SR_MII_STAT_100_MBPS) + speed = SPEED_100; + else + speed = SPEED_10; + + if (val & SR_MII_STAT_FULL_DUPLEX) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + if (!p->phydev.link || + p->phydev.speed != speed || + p->phydev.duplex != duplex) { + u16 ctrl; + + p->phydev.link = 1; + p->phydev.speed = speed; + p->phydev.duplex = duplex; + port_sgmii_r(dev, port, mmd, MII_BMCR, + &ctrl); + ctrl &= BMCR_ANENABLE; + ctrl |= mii_bmcr_encode_fixed(speed, + duplex); + port_sgmii_w(dev, port, mmd, MII_BMCR, + ctrl); + } + } else { + p->phydev.link = 0; + } + } else if (reg == MII_BMSR) { + p->phydev.link = !!(val & BMSR_LSTATUS); + } + } + + return val; +} + +static int ksz9477_pcs_write(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + + if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + if (reg == MMD_SR_MII_AUTO_NEG_CTRL) { + u16 sgmii_mode = SR_MII_PCS_SGMII << SR_MII_PCS_MODE_S; + + /* Need these bits for 1000BASE-X mode to work with + * AN on. + */ + if (!(val & sgmii_mode)) + val |= SR_MII_SGMII_LINK_UP | + SR_MII_TX_CFG_PHY_MASTER; + + /* SGMII interrupt in the port cannot be masked, so + * make sure interrupt is not enabled as it is not + * handled. + */ + val &= ~SR_MII_AUTO_NEG_COMPLETE_INTR; + } else if (reg == MII_BMCR) { + /* The MII_ADVERTISE register needs to write once + * before doing auto-negotiation for the correct + * config_word to be sent out after reset. + */ + if ((val & BMCR_ANENABLE) && !p->sgmii_adv_write) { + u16 adv; + + /* The SGMII port cannot disable flow control + * so it is better to just advertise symmetric + * pause. + */ + port_sgmii_r(dev, port, mmd, MII_ADVERTISE, + &adv); + adv |= ADVERTISE_1000XPAUSE; + adv &= ~ADVERTISE_1000XPSE_ASYM; + port_sgmii_w(dev, port, mmd, MII_ADVERTISE, + adv); + p->sgmii_adv_write = 1; + } else if (val & BMCR_RESET) { + p->sgmii_adv_write = 0; + } + } else if (reg == MII_ADVERTISE) { + /* XPCS driver writes to this register so there is no + * need to update it for the errata. + */ + p->sgmii_adv_write = 1; + } + } + port_sgmii_w(dev, port, mmd, reg, val); + + return 0; +} + +int ksz9477_pcs_create(struct ksz_device *dev) +{ + /* This chip has a SGMII port. */ + if (ksz_has_sgmii_port(dev)) { + int port = ksz_get_sgmii_port(dev); + struct ksz_port *p = &dev->ports[port]; + struct phylink_pcs *pcs; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc(dev->dev); + if (!bus) + return -ENOMEM; + + bus->name = "ksz_pcs_mdio_bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(dev->dev)); + bus->read_c45 = &ksz9477_pcs_read; + bus->write_c45 = &ksz9477_pcs_write; + bus->parent = dev->dev; + bus->phy_mask = ~0; + bus->priv = dev; + + ret = devm_mdiobus_register(dev->dev, bus); + if (ret) + return ret; + + pcs = xpcs_create_pcs_mdiodev(bus, 0); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + p->pcs = pcs; + } + + return 0; +} + int ksz9477_reset_switch(struct ksz_device *dev) { u8 data8; @@ -174,10 +358,8 @@ int ksz9477_reset_switch(struct ksz_device *dev) SPI_AUTO_EDGE_DETECTION, 0); /* default configuration */ - ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); - data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | - SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; - ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + ksz_write8(dev, REG_SW_LUE_CTRL_1, + SW_AGING_ENABLE | SW_LINK_AUTO_AGING | SW_SRC_ADDR_FILTER); /* disable interrupts */ ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); @@ -248,6 +430,73 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) mutex_unlock(&p->mib.cnt_mutex); } +static int ksz9477_half_duplex_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u8 lue_ctrl; + u32 pmavbc; + u16 pqm; + int ret; + + /* Errata DS80000754 recommends monitoring potential faults in + * half-duplex mode. The switch might not be able to communicate anymore + * in these states. If you see this message, please read the + * errata-sheet for more information: + * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf + * To workaround this issue, half-duplex mode should be avoided. + * A software reset could be implemented to recover from this state. + */ + dev_warn_once(dev->dev, + "Half-duplex detected on port %d, transmission halt may occur\n", + port); + if (tx_late_col != 0) { + /* Transmission halt with late collisions */ + dev_crit_once(dev->dev, + "TX late collisions detected, transmission may be halted on port %d\n", + port); + } + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &lue_ctrl); + if (ret) + return ret; + if (lue_ctrl & SW_VLAN_ENABLE) { + ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm); + if (ret) + return ret; + + ret = ksz_read32(dev, REG_PMAVBC, &pmavbc); + if (ret) + return ret; + + if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) || + (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) { + /* Transmission halt with Half-Duplex and VLAN */ + dev_crit_once(dev->dev, + "resources out of limits, transmission may be halted\n"); + } + } + + return ret; +} + +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col) +{ + u8 status; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status); + if (ret) + return ret; + + if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) + == PORT_INTF_SPEED_NONE) && + !(status & PORT_INTF_FULL_DUPLEX)) { + ret = ksz9477_half_duplex_monitor(dev, port, tx_late_col); + } + + return ret; +} + void ksz9477_port_init_cnt(struct ksz_device *dev, int port) { struct ksz_port_mib *mib = &dev->ports[port].mib; @@ -913,31 +1162,64 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; + + if (ksz_is_sgmii_port(dev, port)) { + struct ksz_port *p = &dev->ports[port]; + + phy_interface_or(config->supported_interfaces, + config->supported_interfaces, + p->pcs->supported_interfaces); + } } int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { u32 secs = msecs / 1000; - u8 value; - u8 data; + u8 data, mult, value; + u32 max_val; int ret; - value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); +#define MAX_TIMER_VAL ((1 << 8) - 1) - ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); - if (ret < 0) - return ret; + /* The aging timer comprises a 3-bit multiplier and an 8-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 255 = 1785 seconds. + */ + if (!secs) + secs = 1; - data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); if (ret < 0) return ret; - value &= ~SW_AGE_CNT_M; - value |= FIELD_PREP(SW_AGE_CNT_M, data); + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } - return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + if (ret < 0) + return ret; + } + + value = DIV_ROUND_UP(secs, data); + return ksz_write8(dev, REG_SW_LUE_CTRL_3, value); } void ksz9477_port_queue_split(struct ksz_device *dev, int port) @@ -958,6 +1240,7 @@ void ksz9477_port_queue_split(struct ksz_device *dev, int port) void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { + const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; u16 data16; u8 member; @@ -977,18 +1260,12 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* enable broadcast storm limit */ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - /* disable DiffServ priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); - /* replace priority */ ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, false); ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, MTI_PVID_REPLACE, false); - /* enable 802.1p priority */ - ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); - /* force flow control for non-PHY ports only */ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, @@ -1004,6 +1281,16 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* clear pending interrupts */ if (dev->info->internal_phy[port]) ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); + + ksz9477_port_acl_init(dev, port); + + /* clear pending wake flags */ + ksz_handle_wake_reason(dev, port); + + /* Disable all WoL options by default. Otherwise + * ksz_switch_macaddr_get/put logic will not work properly. + */ + ksz_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], 0); } void ksz9477_config_cpu_port(struct dsa_switch *ds) @@ -1061,12 +1348,22 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) if (i == dev->cpu_port) continue; ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); + + /* Power down the internal PHY if port is unused. */ + if (dsa_is_unused_port(ds, i) && dev->info->internal_phy[i]) + ksz_pwrite16(dev, i, 0x100, BMCR_PDOWN); } } +#define RESV_MCAST_CNT 8 + +static u8 reserved_mcast_map[RESV_MCAST_CNT] = { 0, 1, 3, 16, 32, 33, 2, 17 }; + int ksz9477_enable_stp_addr(struct ksz_device *dev) { + u8 i, ports, update; const u32 *masks; + bool override; u32 data; int ret; @@ -1075,23 +1372,87 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) /* Enable Reserved multicast table */ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); - /* Set the Override bit for forwarding BPDU packet to CPU */ - ret = ksz_write32(dev, REG_SW_ALU_VAL_B, - ALU_V_OVERRIDE | BIT(dev->cpu_port)); - if (ret < 0) - return ret; + /* The reserved multicast address table has 8 entries. Each entry has + * a default value of which port to forward. It is assumed the host + * port is the last port in most of the switches, but that is not the + * case for KSZ9477 or maybe KSZ9897. For LAN937X family the default + * port is port 5, the first RGMII port. It is okay for LAN9370, a + * 5-port switch, but may not be correct for the other 8-port + * versions. It is necessary to update the whole table to forward to + * the right ports. + * Furthermore PTP messages can use a reserved multicast address and + * the host will not receive them if this table is not correct. + */ + for (i = 0; i < RESV_MCAST_CNT; i++) { + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_READ]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; - data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; - ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - if (ret < 0) - return ret; + ret = ksz_read32(dev, REG_SW_ALU_VAL_B, &data); + if (ret < 0) + return ret; - /* wait to be finished */ - ret = ksz9477_wait_alu_sta_ready(dev); - if (ret < 0) { - dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); - return ret; + override = false; + ports = data & dev->port_mask; + switch (i) { + case 0: + case 6: + /* Change the host port. */ + update = BIT(dev->cpu_port); + override = true; + break; + case 2: + /* Change the host port. */ + update = BIT(dev->cpu_port); + break; + case 4: + case 5: + case 7: + /* Skip the host port. */ + update = dev->port_mask & ~BIT(dev->cpu_port); + break; + default: + update = ports; + break; + } + if (update != ports || override) { + data &= ~dev->port_mask; + data |= update; + /* Set Override bit to receive frame even when port is + * closed. + */ + if (override) + data |= ALU_V_OVERRIDE; + ret = ksz_write32(dev, REG_SW_ALU_VAL_B, data); + if (ret < 0) + return ret; + + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_WRITE]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; + } } return 0; @@ -1100,6 +1461,7 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) int ksz9477_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; int ret = 0; ds->mtu_enforcement_ingress = true; @@ -1114,6 +1476,10 @@ int ksz9477_setup(struct dsa_switch *ds) /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); + /* Use collision based back pressure mode. */ + ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_BACK_PRESSURE, + SW_BACK_PRESSURE_COLLISION); + /* Now we can configure default MTU value */ ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); @@ -1126,7 +1492,11 @@ int ksz9477_setup(struct dsa_switch *ds) /* enable global MIB counter freeze function */ ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); - return 0; + /* Make sure PME (WoL) is not enabled. If requested, it will + * be enabled by ksz_wol_pre_shutdown(). Otherwise, some PMICs + * do not like PME events changes before shutdown. + */ + return ksz_write8(dev, regs[REG_SW_PME_CTRL], 0); } u32 ksz9477_get_port_addr(int port, int offset) @@ -1141,6 +1511,83 @@ int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); } +/* The KSZ9477 provides following HW features to accelerate + * HSR frames handling: + * + * 1. TX PACKET DUPLICATION FROM HOST TO SWITCH + * 2. RX PACKET DUPLICATION DISCARDING + * 3. PREVENTING PACKET LOOP IN THE RING BY SELF-ADDRESS FILTERING + * + * Only one from point 1. has the NETIF_F* flag available. + * + * Ones from point 2 and 3 are "best effort" - i.e. those will + * work correctly most of the time, but it may happen that some + * frames will not be caught - to be more specific; there is a race + * condition in hardware such that, when duplicate packets are received + * on member ports very close in time to each other, the hardware fails + * to detect that they are duplicates. + * + * Hence, the SW needs to handle those special cases. However, the speed + * up gain is considerable when above features are used. + * + * Moreover, the NETIF_F_HW_HSR_FWD feature is also enabled, as HSR frames + * can be forwarded in the switch fabric between HSR ports. + */ +#define KSZ9477_SUPPORTED_HSR_FEATURES (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_FWD) + +void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + struct net_device *user; + struct dsa_port *hsr_dp; + u8 data, hsr_ports = 0; + + /* Program which port(s) shall support HSR */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port)); + + /* Forward frames between HSR ports (i.e. bridge together HSR ports) */ + if (dev->hsr_ports) { + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + hsr_ports |= BIT(hsr_dp->index); + + hsr_ports |= BIT(dsa_upstream_port(ds, port)); + dsa_hsr_foreach_port(hsr_dp, ds, hsr) + ksz9477_cfg_port_member(dev, hsr_dp->index, hsr_ports); + } + + if (!dev->hsr_ports) { + /* Enable discarding of received HSR frames */ + ksz_read8(dev, REG_HSR_ALU_CTRL_0__1, &data); + data |= HSR_DUPLICATE_DISCARD; + data &= ~HSR_NODE_UNICAST; + ksz_write8(dev, REG_HSR_ALU_CTRL_0__1, data); + } + + /* Enable per port self-address filtering. + * The global self-address filtering has already been enabled in the + * ksz9477_reset_switch() function. + */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, true); + + /* Setup HW supported features for lan HSR ports */ + user = dsa_to_port(ds, port)->user; + user->features |= KSZ9477_SUPPORTED_HSR_FEATURES; +} + +void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + + /* Clear port HSR support */ + ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), 0); + + /* Disable forwarding frames between HSR ports */ + ksz9477_cfg_port_member(dev, port, BIT(dsa_upstream_port(ds, port))); + + /* Disable per port self-address filtering */ + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, false); +} + int ksz9477_switch_init(struct ksz_device *dev) { u8 data8; diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index a6f425866a29..0d1a6dfda23e 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series Header file * - * Copyright (C) 2017-2022 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_H @@ -36,6 +36,8 @@ int ksz9477_port_mirror_add(struct ksz_device *dev, int port, bool ingress, struct netlink_ext_ack *extack); void ksz9477_port_mirror_del(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror); +int ksz9477_errata_monitor(struct ksz_device *dev, int port, + u64 tx_late_col); void ksz9477_get_caps(struct ksz_device *dev, int port, struct phylink_config *config); int ksz9477_fdb_dump(struct ksz_device *dev, int port, @@ -56,5 +58,45 @@ int ksz9477_reset_switch(struct ksz_device *dev); int ksz9477_switch_init(struct ksz_device *dev); void ksz9477_switch_exit(struct ksz_device *dev); void ksz9477_port_queue_split(struct ksz_device *dev, int port); +void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr); +void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr); + +int ksz9477_port_acl_init(struct ksz_device *dev, int port); +void ksz9477_port_acl_free(struct ksz_device *dev, int port); +int ksz9477_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress); +int ksz9477_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress); + +#define KSZ9477_ACL_ENTRY_SIZE 18 +#define KSZ9477_ACL_MAX_ENTRIES 16 + +struct ksz9477_acl_entry { + u8 entry[KSZ9477_ACL_ENTRY_SIZE]; + unsigned long cookie; + u32 prio; +}; + +struct ksz9477_acl_entries { + struct ksz9477_acl_entry entries[KSZ9477_ACL_MAX_ENTRIES]; + int entries_count; +}; + +struct ksz9477_acl_priv { + struct ksz9477_acl_entries acles; +}; + +void ksz9477_acl_remove_entries(struct ksz_device *dev, int port, + struct ksz9477_acl_entries *acles, + unsigned long cookie); +int ksz9477_acl_write_list(struct ksz_device *dev, int port); +int ksz9477_sort_acl_entries(struct ksz_device *dev, int port); +void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val); +void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx); +void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, + u16 ethtype, u8 *src_mac, u8 *dst_mac, + unsigned long cookie, u32 prio); + +int ksz9477_pcs_create(struct ksz_device *dev); #endif diff --git a/drivers/net/dsa/microchip/ksz9477_acl.c b/drivers/net/dsa/microchip/ksz9477_acl.c new file mode 100644 index 000000000000..7ba778df63ac --- /dev/null +++ b/drivers/net/dsa/microchip/ksz9477_acl.c @@ -0,0 +1,1436 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +/* Access Control List (ACL) structure: + * + * There are multiple groups of registers involved in ACL configuration: + * + * - Matching Rules: These registers define the criteria for matching incoming + * packets based on their header information (Layer 2 MAC, Layer 3 IP, or + * Layer 4 TCP/UDP). Different register settings are used depending on the + * matching rule mode (MD) and the Enable (ENB) settings. + * + * - Action Rules: These registers define how the ACL should modify the packet's + * priority, VLAN tag priority, and forwarding map once a matching rule has + * been triggered. The settings vary depending on whether the matching rule is + * in Count Mode (MD = 01 and ENB = 00) or not. + * + * - Processing Rules: These registers control the overall behavior of the ACL, + * such as selecting which matching rule to apply first, enabling/disabling + * specific rules, or specifying actions for matched packets. + * + * ACL Structure: + * +----------------------+ + * +----------------------+ | (optional) | + * | Matching Rules | | Matching Rules | + * | (Layer 2, 3, 4) | | (Layer 2, 3, 4) | + * +----------------------+ +----------------------+ + * | | + * \___________________________/ + * v + * +----------------------+ + * | Processing Rules | + * | (action idx, | + * | matching rule set) | + * +----------------------+ + * | + * v + * +----------------------+ + * | Action Rules | + * | (Modify Priority, | + * | Forwarding Map, | + * | VLAN tag, etc) | + * +----------------------+ + */ + +#include <linux/bitops.h> + +#include "ksz9477.h" +#include "ksz9477_reg.h" +#include "ksz_common.h" + +#define KSZ9477_PORT_ACL_0 0x600 + +enum ksz9477_acl_port_access { + KSZ9477_ACL_PORT_ACCESS_0 = 0x00, + KSZ9477_ACL_PORT_ACCESS_1 = 0x01, + KSZ9477_ACL_PORT_ACCESS_2 = 0x02, + KSZ9477_ACL_PORT_ACCESS_3 = 0x03, + KSZ9477_ACL_PORT_ACCESS_4 = 0x04, + KSZ9477_ACL_PORT_ACCESS_5 = 0x05, + KSZ9477_ACL_PORT_ACCESS_6 = 0x06, + KSZ9477_ACL_PORT_ACCESS_7 = 0x07, + KSZ9477_ACL_PORT_ACCESS_8 = 0x08, + KSZ9477_ACL_PORT_ACCESS_9 = 0x09, + KSZ9477_ACL_PORT_ACCESS_A = 0x0A, + KSZ9477_ACL_PORT_ACCESS_B = 0x0B, + KSZ9477_ACL_PORT_ACCESS_C = 0x0C, + KSZ9477_ACL_PORT_ACCESS_D = 0x0D, + KSZ9477_ACL_PORT_ACCESS_E = 0x0E, + KSZ9477_ACL_PORT_ACCESS_F = 0x0F, + KSZ9477_ACL_PORT_ACCESS_10 = 0x10, + KSZ9477_ACL_PORT_ACCESS_11 = 0x11 +}; + +#define KSZ9477_ACL_MD_MASK GENMASK(5, 4) +#define KSZ9477_ACL_MD_DISABLE 0 +#define KSZ9477_ACL_MD_L2_MAC 1 +#define KSZ9477_ACL_MD_L3_IP 2 +#define KSZ9477_ACL_MD_L4_TCP_UDP 3 + +#define KSZ9477_ACL_ENB_MASK GENMASK(3, 2) +#define KSZ9477_ACL_ENB_L2_COUNTER 0 +#define KSZ9477_ACL_ENB_L2_TYPE 1 +#define KSZ9477_ACL_ENB_L2_MAC 2 +#define KSZ9477_ACL_ENB_L2_MAC_TYPE 3 + +/* only IPv4 src or dst can be used with mask */ +#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_MASK 1 +/* only IPv4 src and dst can be used without mask */ +#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_SRC_DST 2 + +#define KSZ9477_ACL_ENB_L4_IP_PROTO 0 +#define KSZ9477_ACL_ENB_L4_TCP_SRC_DST_PORT 1 +#define KSZ9477_ACL_ENB_L4_UDP_SRC_DST_PORT 2 +#define KSZ9477_ACL_ENB_L4_TCP_SEQ_NUMBER 3 + +#define KSZ9477_ACL_SD_SRC BIT(1) +#define KSZ9477_ACL_SD_DST 0 +#define KSZ9477_ACL_EQ_EQUAL BIT(0) +#define KSZ9477_ACL_EQ_NOT_EQUAL 0 + +#define KSZ9477_ACL_PM_M GENMASK(7, 6) +#define KSZ9477_ACL_PM_DISABLE 0 +#define KSZ9477_ACL_PM_HIGHER 1 +#define KSZ9477_ACL_PM_LOWER 2 +#define KSZ9477_ACL_PM_REPLACE 3 +#define KSZ9477_ACL_P_M GENMASK(5, 3) + +#define KSZ9477_PORT_ACL_CTRL_0 0x0612 + +#define KSZ9477_ACL_WRITE_DONE BIT(6) +#define KSZ9477_ACL_READ_DONE BIT(5) +#define KSZ9477_ACL_WRITE BIT(4) +#define KSZ9477_ACL_INDEX_M GENMASK(3, 0) + +/** + * ksz9477_dump_acl_index - Print the ACL entry at the specified index + * + * @dev: Pointer to the ksz9477 device structure. + * @acle: Pointer to the ACL entry array. + * @index: The index of the ACL entry to print. + * + * This function prints the details of an ACL entry, located at a particular + * index within the ksz9477 device's ACL table. It omits printing entries that + * are empty. + * + * Return: 1 if the entry is non-empty and printed, 0 otherwise. + */ +static int ksz9477_dump_acl_index(struct ksz_device *dev, + struct ksz9477_acl_entry *acle, int index) +{ + bool empty = true; + char buf[64]; + u8 *entry; + int i; + + entry = &acle[index].entry[0]; + for (i = 0; i <= KSZ9477_ACL_PORT_ACCESS_11; i++) { + if (entry[i]) + empty = false; + + sprintf(buf + (i * 3), "%02x ", entry[i]); + } + + /* no need to print empty entries */ + if (empty) + return 0; + + dev_err(dev->dev, " Entry %02d, prio: %02d : %s", index, + acle[index].prio, buf); + + return 1; +} + +/** + * ksz9477_dump_acl - Print ACL entries + * + * @dev: Pointer to the device structure. + * @acle: Pointer to the ACL entry array. + */ +static void ksz9477_dump_acl(struct ksz_device *dev, + struct ksz9477_acl_entry *acle) +{ + int count = 0; + int i; + + for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES; i++) + count += ksz9477_dump_acl_index(dev, acle, i); + + if (count != KSZ9477_ACL_MAX_ENTRIES - 1) + dev_err(dev->dev, " Empty ACL entries were skipped\n"); +} + +/** + * ksz9477_acl_is_valid_matching_rule - Check if an ACL entry contains a valid + * matching rule. + * + * @entry: Pointer to ACL entry buffer + * + * This function checks if the given ACL entry buffer contains a valid + * matching rule by inspecting the Mode (MD) and Enable (ENB) fields. + * + * Returns: True if it's a valid matching rule, false otherwise. + */ +static bool ksz9477_acl_is_valid_matching_rule(u8 *entry) +{ + u8 val1, md, enb; + + val1 = entry[KSZ9477_ACL_PORT_ACCESS_1]; + + md = FIELD_GET(KSZ9477_ACL_MD_MASK, val1); + if (md == KSZ9477_ACL_MD_DISABLE) + return false; + + if (md == KSZ9477_ACL_MD_L2_MAC) { + /* L2 counter is not support, so it is not valid rule for now */ + enb = FIELD_GET(KSZ9477_ACL_ENB_MASK, val1); + if (enb == KSZ9477_ACL_ENB_L2_COUNTER) + return false; + } + + return true; +} + +/** + * ksz9477_acl_get_cont_entr - Get count of contiguous ACL entries and validate + * the matching rules. + * @dev: Pointer to the KSZ9477 device structure. + * @port: Port number. + * @index: Index of the starting ACL entry. + * + * Based on the KSZ9477 switch's Access Control List (ACL) system, the RuleSet + * in an ACL entry indicates which entries contain Matching rules linked to it. + * This RuleSet is represented by two registers: KSZ9477_ACL_PORT_ACCESS_E and + * KSZ9477_ACL_PORT_ACCESS_F. Each bit set in these registers corresponds to + * an entry containing a Matching rule for this RuleSet. + * + * For a single Matching rule linked, only one bit is set. However, when an + * entry links multiple Matching rules, forming what's termed a 'complex rule', + * multiple bits are set in these registers. + * + * This function checks that, for complex rules, the entries containing the + * linked Matching rules are contiguous in terms of their indices. It calculates + * and returns the number of these contiguous entries. + * + * Returns: + * - 0 if the entry is empty and can be safely overwritten + * - 1 if the entry represents a simple rule + * - The number of contiguous entries if it is the root entry of a complex + * rule + * - -ENOTEMPTY if the entry is part of a complex rule but not the root + * entry + * - -EINVAL if the validation fails + */ +static int ksz9477_acl_get_cont_entr(struct ksz_device *dev, int port, + int index) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int start_idx, end_idx, contiguous_count; + unsigned long val; + u8 vale, valf; + u8 *entry; + int i; + + entry = &acles->entries[index].entry[0]; + vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + val = (vale << 8) | valf; + + /* If no bits are set, return an appropriate value or error */ + if (!val) { + if (ksz9477_acl_is_valid_matching_rule(entry)) { + /* Looks like we are about to corrupt some complex rule. + * Do not print an error here, as this is a normal case + * when we are trying to find a free or starting entry. + */ + dev_dbg(dev->dev, "ACL: entry %d starting with a valid matching rule, but no bits set in RuleSet\n", + index); + return -ENOTEMPTY; + } + + /* This entry does not contain a valid matching rule */ + return 0; + } + + start_idx = find_first_bit((unsigned long *)&val, 16); + end_idx = find_last_bit((unsigned long *)&val, 16); + + /* Calculate the contiguous count */ + contiguous_count = end_idx - start_idx + 1; + + /* Check if the number of bits set in val matches our calculated count */ + if (contiguous_count != hweight16(val)) { + /* Probably we have a fragmented complex rule, which is not + * supported by this driver. + */ + dev_err(dev->dev, "ACL: number of bits set in RuleSet does not match calculated count\n"); + return -EINVAL; + } + + /* loop over the contiguous entries and check for valid matching rules */ + for (i = start_idx; i <= end_idx; i++) { + u8 *current_entry = &acles->entries[i].entry[0]; + + if (!ksz9477_acl_is_valid_matching_rule(current_entry)) { + /* we have something linked without a valid matching + * rule. ACL table? + */ + dev_err(dev->dev, "ACL: entry %d does not contain a valid matching rule\n", + i); + return -EINVAL; + } + + if (i > start_idx) { + vale = current_entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = current_entry[KSZ9477_ACL_PORT_ACCESS_F]; + /* Following entry should have empty linkage list */ + if (vale || valf) { + dev_err(dev->dev, "ACL: entry %d has non-empty RuleSet linkage\n", + i); + return -EINVAL; + } + } + } + + return contiguous_count; +} + +/** + * ksz9477_acl_update_linkage - Update the RuleSet linkage for an ACL entry + * after a move operation. + * + * @dev: Pointer to the ksz_device. + * @entry: Pointer to the ACL entry array. + * @old_idx: The original index of the ACL entry before moving. + * @new_idx: The new index of the ACL entry after moving. + * + * This function updates the RuleSet linkage bits for an ACL entry when + * it's moved from one position to another in the ACL table. The RuleSet + * linkage is represented by two 8-bit registers, which are combined + * into a 16-bit value for easier manipulation. The linkage bits are shifted + * based on the difference between the old and new index. If any bits are lost + * during the shift operation, an error is returned. + * + * Note: Fragmentation within a RuleSet is not supported. Hence, entries must + * be moved as complete blocks, maintaining the integrity of the RuleSet. + * + * Returns: 0 on success, or -EINVAL if any RuleSet linkage bits are lost + * during the move. + */ +static int ksz9477_acl_update_linkage(struct ksz_device *dev, u8 *entry, + u16 old_idx, u16 new_idx) +{ + unsigned int original_bit_count; + unsigned long rule_linkage; + u8 vale, valf, val0; + int shift; + + val0 = entry[KSZ9477_ACL_PORT_ACCESS_0]; + vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + /* Combine the two u8 values into one u16 for easier manipulation */ + rule_linkage = (vale << 8) | valf; + original_bit_count = hweight16(rule_linkage); + + /* Even if HW is able to handle fragmented RuleSet, we don't support it. + * RuleSet is filled only for the first entry of the set. + */ + if (!rule_linkage) + return 0; + + if (val0 != old_idx) { + dev_err(dev->dev, "ACL: entry %d has unexpected ActionRule linkage: %d\n", + old_idx, val0); + return -EINVAL; + } + + val0 = new_idx; + + /* Calculate the number of positions to shift */ + shift = new_idx - old_idx; + + /* Shift the RuleSet */ + if (shift > 0) + rule_linkage <<= shift; + else + rule_linkage >>= -shift; + + /* Check that no bits were lost in the process */ + if (original_bit_count != hweight16(rule_linkage)) { + dev_err(dev->dev, "ACL RuleSet linkage bits lost during move\n"); + return -EINVAL; + } + + entry[KSZ9477_ACL_PORT_ACCESS_0] = val0; + + /* Update the RuleSet bitfields in the entry */ + entry[KSZ9477_ACL_PORT_ACCESS_E] = (rule_linkage >> 8) & 0xFF; + entry[KSZ9477_ACL_PORT_ACCESS_F] = rule_linkage & 0xFF; + + return 0; +} + +/** + * ksz9477_validate_and_get_src_count - Validate source and destination indices + * and determine the source entry count. + * @dev: Pointer to the KSZ device structure. + * @port: Port number on the KSZ device where the ACL entries reside. + * @src_idx: Index of the starting ACL entry that needs to be validated. + * @dst_idx: Index of the destination where the source entries are intended to + * be moved. + * @src_count: Pointer to the variable that will hold the number of contiguous + * source entries if the validation passes. + * @dst_count: Pointer to the variable that will hold the number of contiguous + * destination entries if the validation passes. + * + * This function performs validation on the source and destination indices + * provided for ACL entries. It checks if the indices are within the valid + * range, and if the source entries are contiguous. Additionally, the function + * ensures that there's adequate space at the destination for the source entries + * and that the destination index isn't in the middle of a RuleSet. If all + * validations pass, the function returns the number of contiguous source and + * destination entries. + * + * Return: 0 on success, otherwise returns a negative error code if any + * validation check fails. + */ +static int ksz9477_validate_and_get_src_count(struct ksz_device *dev, int port, + int src_idx, int dst_idx, + int *src_count, int *dst_count) +{ + int ret; + + if (src_idx >= KSZ9477_ACL_MAX_ENTRIES || + dst_idx >= KSZ9477_ACL_MAX_ENTRIES) { + dev_err(dev->dev, "ACL: invalid entry index\n"); + return -EINVAL; + } + + /* Validate if the source entries are contiguous */ + ret = ksz9477_acl_get_cont_entr(dev, port, src_idx); + if (ret < 0) + return ret; + *src_count = ret; + + if (!*src_count) { + dev_err(dev->dev, "ACL: source entry is empty\n"); + return -EINVAL; + } + + if (dst_idx + *src_count >= KSZ9477_ACL_MAX_ENTRIES) { + dev_err(dev->dev, "ACL: Not enough space at the destination. Move operation will fail.\n"); + return -EINVAL; + } + + /* Validate if the destination entry is empty or not in the middle of + * a RuleSet. + */ + ret = ksz9477_acl_get_cont_entr(dev, port, dst_idx); + if (ret < 0) + return ret; + *dst_count = ret; + + return 0; +} + +/** + * ksz9477_move_entries_downwards - Move a range of ACL entries downwards in + * the list. + * @dev: Pointer to the KSZ device structure. + * @acles: Pointer to the structure encapsulating all the ACL entries. + * @start_idx: Starting index of the entries to be relocated. + * @num_entries_to_move: Number of consecutive entries to be relocated. + * @end_idx: Destination index where the first entry should be situated post + * relocation. + * + * This function is responsible for rearranging a specific block of ACL entries + * by shifting them downwards in the list based on the supplied source and + * destination indices. It ensures that the linkage between the ACL entries is + * maintained accurately after the relocation. + * + * Return: 0 on successful relocation of entries, otherwise returns a negative + * error code. + */ +static int ksz9477_move_entries_downwards(struct ksz_device *dev, + struct ksz9477_acl_entries *acles, + u16 start_idx, + u16 num_entries_to_move, + u16 end_idx) +{ + struct ksz9477_acl_entry *e; + int ret, i; + + for (i = start_idx; i < end_idx; i++) { + e = &acles->entries[i]; + *e = acles->entries[i + num_entries_to_move]; + + ret = ksz9477_acl_update_linkage(dev, &e->entry[0], + i + num_entries_to_move, i); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * ksz9477_move_entries_upwards - Move a range of ACL entries upwards in the + * list. + * @dev: Pointer to the KSZ device structure. + * @acles: Pointer to the structure holding all the ACL entries. + * @start_idx: The starting index of the entries to be moved. + * @num_entries_to_move: Number of contiguous entries to be moved. + * @target_idx: The destination index where the first entry should be placed + * after moving. + * + * This function rearranges a chunk of ACL entries by moving them upwards + * in the list based on the given source and destination indices. The reordering + * process preserves the linkage between entries by updating it accordingly. + * + * Return: 0 if the entries were successfully moved, otherwise a negative error + * code. + */ +static int ksz9477_move_entries_upwards(struct ksz_device *dev, + struct ksz9477_acl_entries *acles, + u16 start_idx, u16 num_entries_to_move, + u16 target_idx) +{ + struct ksz9477_acl_entry *e; + int ret, i, b; + + for (i = start_idx; i > target_idx; i--) { + b = i + num_entries_to_move - 1; + + e = &acles->entries[b]; + *e = acles->entries[i - 1]; + + ret = ksz9477_acl_update_linkage(dev, &e->entry[0], i - 1, b); + if (ret < 0) + return ret; + } + + return 0; +} + +/** + * ksz9477_acl_move_entries - Move a block of contiguous ACL entries from a + * source to a destination index. + * @dev: Pointer to the KSZ9477 device structure. + * @port: Port number. + * @src_idx: Index of the starting source ACL entry. + * @dst_idx: Index of the starting destination ACL entry. + * + * This function aims to move a block of contiguous ACL entries from the source + * index to the destination index while ensuring the integrity and validity of + * the ACL table. + * + * In case of any errors during the adjustments or copying, the function will + * restore the ACL entries to their original state from the backup. + * + * Return: 0 if the move operation is successful. Returns -EINVAL for validation + * errors or other error codes based on specific failure conditions. + */ +static int ksz9477_acl_move_entries(struct ksz_device *dev, int port, + u16 src_idx, u16 dst_idx) +{ + struct ksz9477_acl_entry buffer[KSZ9477_ACL_MAX_ENTRIES]; + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int src_count, ret, dst_count; + + /* Nothing to do */ + if (src_idx == dst_idx) + return 0; + + ret = ksz9477_validate_and_get_src_count(dev, port, src_idx, dst_idx, + &src_count, &dst_count); + if (ret) + return ret; + + /* In case dst_index is greater than src_index, we need to adjust the + * destination index to account for the entries that will be moved + * downwards and the size of the entry located at dst_idx. + */ + if (dst_idx > src_idx) + dst_idx = dst_idx + dst_count - src_count; + + /* Copy source block to buffer and update its linkage */ + for (int i = 0; i < src_count; i++) { + buffer[i] = acles->entries[src_idx + i]; + ret = ksz9477_acl_update_linkage(dev, &buffer[i].entry[0], + src_idx + i, dst_idx + i); + if (ret < 0) + return ret; + } + + /* Adjust other entries and their linkage based on destination */ + if (dst_idx > src_idx) { + ret = ksz9477_move_entries_downwards(dev, acles, src_idx, + src_count, dst_idx); + } else { + ret = ksz9477_move_entries_upwards(dev, acles, src_idx, + src_count, dst_idx); + } + if (ret < 0) + return ret; + + /* Copy buffer to destination block */ + for (int i = 0; i < src_count; i++) + acles->entries[dst_idx + i] = buffer[i]; + + return 0; +} + +/** + * ksz9477_get_next_block_start - Identify the starting index of the next ACL + * block. + * @dev: Pointer to the device structure. + * @port: The port number on which the ACL entries are being checked. + * @start: The starting index from which the search begins. + * + * This function looks for the next valid ACL block starting from the provided + * 'start' index and returns the beginning index of that block. If the block is + * invalid or if it reaches the end of the ACL entries without finding another + * block, it returns the maximum ACL entries count. + * + * Returns: + * - The starting index of the next valid ACL block. + * - KSZ9477_ACL_MAX_ENTRIES if no other valid blocks are found after 'start'. + * - A negative error code if an error occurs while checking. + */ +static int ksz9477_get_next_block_start(struct ksz_device *dev, int port, + int start) +{ + int block_size; + + for (int i = start; i < KSZ9477_ACL_MAX_ENTRIES;) { + block_size = ksz9477_acl_get_cont_entr(dev, port, i); + if (block_size < 0 && block_size != -ENOTEMPTY) + return block_size; + + if (block_size > 0) + return i; + + i++; + } + return KSZ9477_ACL_MAX_ENTRIES; +} + +/** + * ksz9477_swap_acl_blocks - Swap two ACL blocks + * @dev: Pointer to the device structure. + * @port: The port number on which the ACL blocks are to be swapped. + * @i: The starting index of the first ACL block. + * @j: The starting index of the second ACL block. + * + * This function is used to swap two ACL blocks present at given indices. The + * main purpose is to aid in the sorting and reordering of ACL blocks based on + * certain criteria, e.g., priority. It checks the validity of the block at + * index 'i', ensuring it's not an empty block, and then proceeds to swap it + * with the block at index 'j'. + * + * Returns: + * - 0 on successful swapping of blocks. + * - -EINVAL if the block at index 'i' is empty. + * - A negative error code if any other error occurs during the swap. + */ +static int ksz9477_swap_acl_blocks(struct ksz_device *dev, int port, int i, + int j) +{ + int ret, current_block_size; + + current_block_size = ksz9477_acl_get_cont_entr(dev, port, i); + if (current_block_size < 0) + return current_block_size; + + if (!current_block_size) { + dev_err(dev->dev, "ACL: swapping empty entry %d\n", i); + return -EINVAL; + } + + ret = ksz9477_acl_move_entries(dev, port, i, j); + if (ret) + return ret; + + ret = ksz9477_acl_move_entries(dev, port, j - current_block_size, i); + if (ret) + return ret; + + return 0; +} + +/** + * ksz9477_sort_acl_entr_no_back - Sort ACL entries for a given port based on + * priority without backing up entries. + * @dev: Pointer to the device structure. + * @port: The port number whose ACL entries need to be sorted. + * + * This function sorts ACL entries of the specified port using a variant of the + * bubble sort algorithm. It operates on blocks of ACL entries rather than + * individual entries. Each block's starting point is identified and then + * compared with subsequent blocks based on their priority. If the current + * block has a lower priority than the subsequent block, the two blocks are + * swapped. + * + * This is done in order to maintain an organized order of ACL entries based on + * priority, ensuring efficient and predictable ACL rule application. + * + * Returns: + * - 0 on successful sorting of entries. + * - A negative error code if any issue arises during sorting, e.g., + * if the function is unable to get the next block start. + */ +static int ksz9477_sort_acl_entr_no_back(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *curr, *next; + int i, j, ret; + + /* Bubble sort */ + for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES;) { + curr = &acles->entries[i]; + + j = ksz9477_get_next_block_start(dev, port, i + 1); + if (j < 0) + return j; + + while (j < KSZ9477_ACL_MAX_ENTRIES) { + next = &acles->entries[j]; + + if (curr->prio > next->prio) { + ret = ksz9477_swap_acl_blocks(dev, port, i, j); + if (ret) + return ret; + } + + j = ksz9477_get_next_block_start(dev, port, j + 1); + if (j < 0) + return j; + } + + i = ksz9477_get_next_block_start(dev, port, i + 1); + if (i < 0) + return i; + } + + return 0; +} + +/** + * ksz9477_sort_acl_entries - Sort the ACL entries for a given port. + * @dev: Pointer to the KSZ device. + * @port: Port number. + * + * This function sorts the Access Control List (ACL) entries for a specified + * port. Before sorting, a backup of the original entries is created. If the + * sorting process fails, the function will log error messages displaying both + * the original and attempted sorted entries, and then restore the original + * entries from the backup. + * + * Return: 0 if the sorting succeeds, otherwise a negative error code. + */ +int ksz9477_sort_acl_entries(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_entry backup[KSZ9477_ACL_MAX_ENTRIES]; + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int ret; + + /* create a backup of the ACL entries, if something goes wrong + * we can restore the ACL entries. + */ + memcpy(backup, acles->entries, sizeof(backup)); + + ret = ksz9477_sort_acl_entr_no_back(dev, port); + if (ret) { + dev_err(dev->dev, "ACL: failed to sort entries for port %d\n", + port); + dev_err(dev->dev, "ACL dump before sorting:\n"); + ksz9477_dump_acl(dev, backup); + dev_err(dev->dev, "ACL dump after sorting:\n"); + ksz9477_dump_acl(dev, acles->entries); + /* Restore the original entries */ + memcpy(acles->entries, backup, sizeof(backup)); + } + + return ret; +} + +/** + * ksz9477_acl_wait_ready - Waits for the ACL operation to complete on a given + * port. + * @dev: The ksz_device instance. + * @port: The port number to wait for. + * + * This function checks if the ACL write or read operation is completed by + * polling the specified register. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_wait_ready(struct ksz_device *dev, int port) +{ + unsigned int wr_mask = KSZ9477_ACL_WRITE_DONE | KSZ9477_ACL_READ_DONE; + unsigned int val, reg; + int ret; + + reg = dev->dev_ops->get_port_addr(port, KSZ9477_PORT_ACL_CTRL_0); + + ret = regmap_read_poll_timeout(dev->regmap[0], reg, val, + (val & wr_mask) == wr_mask, 1000, 10000); + if (ret) + dev_err(dev->dev, "Failed to read/write ACL table\n"); + + return ret; +} + +/** + * ksz9477_acl_entry_write - Writes an ACL entry to a given port at the + * specified index. + * @dev: The ksz_device instance. + * @port: The port number to write the ACL entry to. + * @entry: A pointer to the ACL entry data. + * @idx: The index at which to write the ACL entry. + * + * This function writes the provided ACL entry to the specified port at the + * given index. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_entry_write(struct ksz_device *dev, int port, u8 *entry, + int idx) +{ + int ret, i; + u8 val; + + for (i = 0; i < KSZ9477_ACL_ENTRY_SIZE; i++) { + ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_0 + i, entry[i]); + if (ret) { + dev_err(dev->dev, "Failed to write ACL entry %d\n", i); + return ret; + } + } + + /* write everything down */ + val = FIELD_PREP(KSZ9477_ACL_INDEX_M, idx) | KSZ9477_ACL_WRITE; + ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_CTRL_0, val); + if (ret) + return ret; + + /* wait until everything is written */ + return ksz9477_acl_wait_ready(dev, port); +} + +/** + * ksz9477_acl_port_enable - Enables ACL functionality on a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to enable ACL functionality. + * + * This function enables ACL functionality on the specified port by configuring + * the appropriate control registers. It returns 0 if the operation is + * successful, or a negative error code if an error occurs. + * + * 0xn801 - KSZ9477S 5.2.8.2 Port Priority Control Register + * Bit 7 - Highest Priority + * Bit 6 - OR'ed Priority + * Bit 4 - MAC Address Priority Classification + * Bit 3 - VLAN Priority Classification + * Bit 2 - 802.1p Priority Classification + * Bit 1 - Diffserv Priority Classification + * Bit 0 - ACL Priority Classification + * + * Current driver implementation sets 802.1p priority classification by default. + * In this function we add ACL priority classification with OR'ed priority. + * According to testing, priority set by ACL will supersede the 802.1p priority. + * + * 0xn803 - KSZ9477S 5.2.8.4 Port Authentication Control Register + * Bit 2 - Access Control List (ACL) Enable + * Bits 1:0 - Authentication Mode + * 00 = Reserved + * 01 = Block Mode. Authentication is enabled. When ACL is + * enabled, all traffic that misses the ACL rules is + * blocked; otherwise ACL actions apply. + * 10 = Pass Mode. Authentication is disabled. When ACL is + * enabled, all traffic that misses the ACL rules is + * forwarded; otherwise ACL actions apply. + * 11 = Trap Mode. Authentication is enabled. All traffic is + * forwarded to the host port. When ACL is enabled, all + * traffic that misses the ACL rules is blocked; otherwise + * ACL actions apply. + * + * We are using Pass Mode int this function. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_port_enable(struct ksz_device *dev, int port) +{ + int ret; + + ret = ksz_prmw8(dev, port, P_PRIO_CTRL, 0, PORT_ACL_PRIO_ENABLE | + PORT_OR_PRIO); + if (ret) + return ret; + + return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, + PORT_ACL_ENABLE | + FIELD_PREP(PORT_AUTHEN_MODE, PORT_AUTHEN_PASS)); +} + +/** + * ksz9477_acl_port_disable - Disables ACL functionality on a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to disable ACL functionality. + * + * This function disables ACL functionality on the specified port by writing a + * value of 0 to the REG_PORT_MRI_AUTHEN_CTRL control register and remove + * PORT_ACL_PRIO_ENABLE bit from P_PRIO_CTRL register. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +static int ksz9477_acl_port_disable(struct ksz_device *dev, int port) +{ + int ret; + + ret = ksz_prmw8(dev, port, P_PRIO_CTRL, PORT_ACL_PRIO_ENABLE, 0); + if (ret) + return ret; + + return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, 0); +} + +/** + * ksz9477_acl_write_list - Write a list of ACL entries to a given port. + * @dev: The ksz_device instance. + * @port: The port number on which to write ACL entries. + * + * This function enables ACL functionality on the specified port, writes a list + * of ACL entries to the port, and disables ACL functionality if there are no + * entries. + * + * Returns: 0 if the operation is successful, or a negative error code if an + * error occurs. + */ +int ksz9477_acl_write_list(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + int ret, i; + + /* ACL should be enabled before writing entries */ + ret = ksz9477_acl_port_enable(dev, port); + if (ret) + return ret; + + /* write all entries */ + for (i = 0; i < ARRAY_SIZE(acles->entries); i++) { + u8 *entry = acles->entries[i].entry; + + /* Check if entry was removed and should be zeroed. + * If last fields of the entry are not zero, it means + * it is removed locally but currently not synced with the HW. + * So, we will write it down to the HW to remove it. + */ + if (i >= acles->entries_count && + entry[KSZ9477_ACL_PORT_ACCESS_10] == 0 && + entry[KSZ9477_ACL_PORT_ACCESS_11] == 0) + continue; + + ret = ksz9477_acl_entry_write(dev, port, entry, i); + if (ret) + return ret; + + /* now removed entry is clean on HW side, so it can + * in the cache too + */ + if (i >= acles->entries_count && + entry[KSZ9477_ACL_PORT_ACCESS_10] != 0 && + entry[KSZ9477_ACL_PORT_ACCESS_11] != 0) { + entry[KSZ9477_ACL_PORT_ACCESS_10] = 0; + entry[KSZ9477_ACL_PORT_ACCESS_11] = 0; + } + } + + if (!acles->entries_count) + return ksz9477_acl_port_disable(dev, port); + + return 0; +} + +/** + * ksz9477_acl_remove_entries - Remove ACL entries with a given cookie from a + * specified ksz9477_acl_entries structure. + * @dev: The ksz_device instance. + * @port: The port number on which to remove ACL entries. + * @acles: The ksz9477_acl_entries instance. + * @cookie: The cookie value to match for entry removal. + * + * This function iterates through the entries array, removing any entries with + * a matching cookie value. The remaining entries are then shifted down to fill + * the gap. + */ +void ksz9477_acl_remove_entries(struct ksz_device *dev, int port, + struct ksz9477_acl_entries *acles, + unsigned long cookie) +{ + int entries_count = acles->entries_count; + int ret, i, src_count; + int src_idx = -1; + + if (!entries_count) + return; + + /* Search for the first position with the cookie */ + for (i = 0; i < entries_count; i++) { + if (acles->entries[i].cookie == cookie) { + src_idx = i; + break; + } + } + + /* No entries with the matching cookie found */ + if (src_idx == -1) + return; + + /* Get the size of the cookie entry. We may have complex entries. */ + src_count = ksz9477_acl_get_cont_entr(dev, port, src_idx); + if (src_count <= 0) + return; + + /* Move all entries down to overwrite removed entry with the cookie */ + ret = ksz9477_move_entries_downwards(dev, acles, src_idx, + src_count, + entries_count - src_count); + if (ret) { + dev_err(dev->dev, "Failed to move ACL entries down\n"); + return; + } + + /* Overwrite new empty places at the end of the list with zeros to make + * sure not unexpected things will happen or no unexplored quirks will + * come out. + */ + for (i = entries_count - src_count; i < entries_count; i++) { + struct ksz9477_acl_entry *entry = &acles->entries[i]; + + memset(entry, 0, sizeof(*entry)); + + /* Set all access bits to be able to write zeroed entry to HW */ + entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff; + entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff; + } + + /* Adjust the total entries count */ + acles->entries_count -= src_count; +} + +/** + * ksz9477_port_acl_init - Initialize the ACL for a specified port on a ksz + * device. + * @dev: The ksz_device instance. + * @port: The port number to initialize the ACL for. + * + * This function allocates memory for an acl structure, associates it with the + * specified port, and initializes the ACL entries to a default state. The + * entries are then written using the ksz9477_acl_write_list function, ensuring + * the ACL has a predictable initial hardware state. + * + * Returns: 0 on success, or an error code on failure. + */ +int ksz9477_port_acl_init(struct ksz_device *dev, int port) +{ + struct ksz9477_acl_entries *acles; + struct ksz9477_acl_priv *acl; + int ret, i; + + acl = kzalloc(sizeof(*acl), GFP_KERNEL); + if (!acl) + return -ENOMEM; + + dev->ports[port].acl_priv = acl; + + acles = &acl->acles; + /* write all entries */ + for (i = 0; i < ARRAY_SIZE(acles->entries); i++) { + u8 *entry = acles->entries[i].entry; + + /* Set all access bits to be able to write zeroed + * entry + */ + entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff; + entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff; + } + + ret = ksz9477_acl_write_list(dev, port); + if (ret) + goto free_acl; + + return 0; + +free_acl: + kfree(dev->ports[port].acl_priv); + dev->ports[port].acl_priv = NULL; + + return ret; +} + +/** + * ksz9477_port_acl_free - Free the ACL resources for a specified port on a ksz + * device. + * @dev: The ksz_device instance. + * @port: The port number to initialize the ACL for. + * + * This disables the ACL for the specified port and frees the associated memory, + */ +void ksz9477_port_acl_free(struct ksz_device *dev, int port) +{ + if (!dev->ports[port].acl_priv) + return; + + ksz9477_acl_port_disable(dev, port); + + kfree(dev->ports[port].acl_priv); + dev->ports[port].acl_priv = NULL; +} + +/** + * ksz9477_acl_set_reg - Set entry[16] and entry[17] depending on the updated + * entry[] + * @entry: An array containing the entries + * @reg: The register of the entry that needs to be updated + * @value: The value to be assigned to the updated entry + * + * This function updates the entry[] array based on the provided register and + * value. It also sets entry[0x10] and entry[0x11] according to the ACL byte + * enable rules. + * + * 0x10 - Byte Enable [15:8] + * + * Each bit enables accessing one of the ACL bytes when a read or write is + * initiated by writing to the Port ACL Byte Enable LSB Register. + * Bit 0 applies to the Port ACL Access 7 Register + * Bit 1 applies to the Port ACL Access 6 Register, etc. + * Bit 7 applies to the Port ACL Access 0 Register + * 1 = Byte is selected for read/write + * 0 = Byte is not selected + * + * 0x11 - Byte Enable [7:0] + * + * Each bit enables accessing one of the ACL bytes when a read or write is + * initiated by writing to the Port ACL Byte Enable LSB Register. + * Bit 0 applies to the Port ACL Access F Register + * Bit 1 applies to the Port ACL Access E Register, etc. + * Bit 7 applies to the Port ACL Access 8 Register + * 1 = Byte is selected for read/write + * 0 = Byte is not selected + */ +static void ksz9477_acl_set_reg(u8 *entry, enum ksz9477_acl_port_access reg, + u8 value) +{ + if (reg >= KSZ9477_ACL_PORT_ACCESS_0 && + reg <= KSZ9477_ACL_PORT_ACCESS_7) { + entry[KSZ9477_ACL_PORT_ACCESS_10] |= + BIT(KSZ9477_ACL_PORT_ACCESS_7 - reg); + } else if (reg >= KSZ9477_ACL_PORT_ACCESS_8 && + reg <= KSZ9477_ACL_PORT_ACCESS_F) { + entry[KSZ9477_ACL_PORT_ACCESS_11] |= + BIT(KSZ9477_ACL_PORT_ACCESS_F - reg); + } else { + WARN_ON(1); + return; + } + + entry[reg] = value; +} + +/** + * ksz9477_acl_matching_rule_cfg_l2 - Configure an ACL filtering entry to match + * L2 types of Ethernet frames + * @entry: Pointer to ACL entry buffer + * @ethertype: Ethertype value + * @eth_addr: Pointer to Ethernet address + * @is_src: If true, match the source MAC address; if false, match the + * destination MAC address + * + * This function configures an Access Control List (ACL) filtering + * entry to match Layer 2 types of Ethernet frames based on the provided + * ethertype and Ethernet address. Additionally, it can match either the source + * or destination MAC address depending on the value of the is_src parameter. + * + * Register Descriptions for MD = 01 and ENB != 00 (Layer 2 MAC header + * filtering) + * + * 0x01 - Mode and Enable + * Bits 5:4 - MD (Mode) + * 01 = Layer 2 MAC header or counter filtering + * Bits 3:2 - ENB (Enable) + * 01 = Comparison is performed only on the TYPE value + * 10 = Comparison is performed only on the MAC Address value + * 11 = Both the MAC Address and TYPE are tested + * Bit 1 - S/D (Source / Destination) + * 0 = Destination address + * 1 = Source address + * Bit 0 - EQ (Equal / Not Equal) + * 0 = Not Equal produces true result + * 1 = Equal produces true result + * + * 0x02-0x07 - MAC Address + * 0x02 - MAC Address [47:40] + * 0x03 - MAC Address [39:32] + * 0x04 - MAC Address [31:24] + * 0x05 - MAC Address [23:16] + * 0x06 - MAC Address [15:8] + * 0x07 - MAC Address [7:0] + * + * 0x08-0x09 - EtherType + * 0x08 - EtherType [15:8] + * 0x09 - EtherType [7:0] + */ +static void ksz9477_acl_matching_rule_cfg_l2(u8 *entry, u16 ethertype, + u8 *eth_addr, bool is_src) +{ + u8 enb = 0; + u8 val; + + if (ethertype) + enb |= KSZ9477_ACL_ENB_L2_TYPE; + if (eth_addr) + enb |= KSZ9477_ACL_ENB_L2_MAC; + + val = FIELD_PREP(KSZ9477_ACL_MD_MASK, KSZ9477_ACL_MD_L2_MAC) | + FIELD_PREP(KSZ9477_ACL_ENB_MASK, enb) | + FIELD_PREP(KSZ9477_ACL_SD_SRC, is_src) | KSZ9477_ACL_EQ_EQUAL; + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_1, val); + + if (eth_addr) { + int i; + + for (i = 0; i < ETH_ALEN; i++) { + ksz9477_acl_set_reg(entry, + KSZ9477_ACL_PORT_ACCESS_2 + i, + eth_addr[i]); + } + } + + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_8, ethertype >> 8); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_9, ethertype & 0xff); +} + +/** + * ksz9477_acl_action_rule_cfg - Set action for an ACL entry + * @entry: Pointer to the ACL entry + * @force_prio: If true, force the priority value + * @prio_val: Priority value + * + * This function sets the action for the specified ACL entry. It prepares + * the priority mode and traffic class values and updates the entry's + * action registers accordingly. Currently, there is no port or VLAN PCP + * remapping. + * + * ACL Action Rule Parameters for Non-Count Modes (MD ≠01 or ENB ≠00) + * + * 0x0A - PM, P, RPE, RP[2:1] + * Bits 7:6 - PM[1:0] - Priority Mode + * 00 = ACL does not specify the packet priority. Priority is + * determined by standard QoS functions. + * 01 = Change packet priority to P[2:0] if it is greater than QoS + * result. + * 10 = Change packet priority to P[2:0] if it is smaller than the + * QoS result. + * 11 = Always change packet priority to P[2:0]. + * Bits 5:3 - P[2:0] - Priority value + * Bit 2 - RPE - Remark Priority Enable + * Bits 1:0 - RP[2:1] - Remarked Priority value (bits 2:1) + * 0 = Disable priority remarking + * 1 = Enable priority remarking. VLAN tag priority (PCP) bits are + * replaced by RP[2:0]. + * + * 0x0B - RP[0], MM + * Bit 7 - RP[0] - Remarked Priority value (bit 0) + * Bits 6:5 - MM[1:0] - Map Mode + * 00 = No forwarding remapping + * 01 = The forwarding map in FORWARD is OR'ed with the forwarding + * map from the Address Lookup Table. + * 10 = The forwarding map in FORWARD is AND'ed with the forwarding + * map from the Address Lookup Table. + * 11 = The forwarding map in FORWARD replaces the forwarding map + * from the Address Lookup Table. + * 0x0D - FORWARD[n:0] + * Bits 7:0 - FORWARD[n:0] - Forwarding map. Bit 0 = port 1, + * bit 1 = port 2, etc. + * 1 = enable forwarding to this port + * 0 = do not forward to this port + */ +void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val) +{ + u8 prio_mode, val; + + if (force_prio) + prio_mode = KSZ9477_ACL_PM_REPLACE; + else + prio_mode = KSZ9477_ACL_PM_DISABLE; + + val = FIELD_PREP(KSZ9477_ACL_PM_M, prio_mode) | + FIELD_PREP(KSZ9477_ACL_P_M, prio_val); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_A, val); + + /* no port or VLAN PCP remapping for now */ + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_B, 0); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_D, 0); +} + +/** + * ksz9477_acl_processing_rule_set_action - Set the action for the processing + * rule set. + * @entry: Pointer to the ACL entry + * @action_idx: Index of the action to be applied + * + * This function sets the action for the processing rule set by updating the + * appropriate register in the entry. There can be only one action per + * processing rule. + * + * Access Control List (ACL) Processing Rule Registers: + * + * 0x00 - First Rule Number (FRN) + * Bits 3:0 - First Rule Number. Pointer to an Action rule entry. + */ +void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx) +{ + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_0, action_idx); +} + +/** + * ksz9477_acl_processing_rule_add_match - Add a matching rule to the rule set + * @entry: Pointer to the ACL entry + * @match_idx: Index of the matching rule to be added + * + * This function adds a matching rule to the rule set by updating the + * appropriate bits in the entry's rule set registers. + * + * Access Control List (ACL) Processing Rule Registers: + * + * 0x0E - RuleSet [15:8] + * Bits 7:0 - RuleSet [15:8] Specifies a set of one or more Matching rule + * entries. RuleSet has one bit for each of the 16 Matching rule entries. + * If multiple Matching rules are selected, then all conditions will be + * AND'ed to produce a final match result. + * 0 = Matching rule not selected + * 1 = Matching rule selected + * + * 0x0F - RuleSet [7:0] + * Bits 7:0 - RuleSet [7:0] + */ +static void ksz9477_acl_processing_rule_add_match(u8 *entry, u8 match_idx) +{ + u8 vale = entry[KSZ9477_ACL_PORT_ACCESS_E]; + u8 valf = entry[KSZ9477_ACL_PORT_ACCESS_F]; + + if (match_idx < 8) + valf |= BIT(match_idx); + else + vale |= BIT(match_idx - 8); + + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_E, vale); + ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_F, valf); +} + +/** + * ksz9477_acl_get_init_entry - Get a new uninitialized entry for a specified + * port on a ksz_device. + * @dev: The ksz_device instance. + * @port: The port number to get the uninitialized entry for. + * @cookie: The cookie to associate with the entry. + * @prio: The priority to associate with the entry. + * + * This function retrieves the next available ACL entry for the specified port, + * clears all access flags, and associates it with the current cookie. + * + * Returns: A pointer to the new uninitialized ACL entry. + */ +static struct ksz9477_acl_entry * +ksz9477_acl_get_init_entry(struct ksz_device *dev, int port, + unsigned long cookie, u32 prio) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *entry; + + entry = &acles->entries[acles->entries_count]; + entry->cookie = cookie; + entry->prio = prio; + + /* clear all access flags */ + entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0; + entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0; + + return entry; +} + +/** + * ksz9477_acl_match_process_l2 - Configure Layer 2 ACL matching rules and + * processing rules. + * @dev: Pointer to the ksz_device. + * @port: Port number. + * @ethtype: Ethernet type. + * @src_mac: Source MAC address. + * @dst_mac: Destination MAC address. + * @cookie: The cookie to associate with the entry. + * @prio: The priority of the entry. + * + * This function sets up matching and processing rules for Layer 2 ACLs. + * It takes into account that only one MAC per entry is supported. + */ +void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, + u16 ethtype, u8 *src_mac, u8 *dst_mac, + unsigned long cookie, u32 prio) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct ksz9477_acl_entries *acles = &acl->acles; + struct ksz9477_acl_entry *entry; + + entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio); + + /* ACL supports only one MAC per entry */ + if (src_mac && dst_mac) { + ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, src_mac, + true); + + /* Add both match entries to first processing rule */ + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + acles->entries_count++; + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + + entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio); + ksz9477_acl_matching_rule_cfg_l2(entry->entry, 0, dst_mac, + false); + acles->entries_count++; + } else { + u8 *mac = src_mac ? src_mac : dst_mac; + bool is_src = src_mac ? true : false; + + ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, mac, + is_src); + ksz9477_acl_processing_rule_add_match(entry->entry, + acles->entries_count); + acles->entries_count++; + } +} diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 2710afad4f3a..a2beb27459f1 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series register access through I2C * - * Copyright (C) 2018-2019 Microchip Technology Inc. + * Copyright (C) 2018-2024 Microchip Technology Inc. */ #include <linux/i2c.h> @@ -16,6 +16,8 @@ KSZ_REGMAP_TABLE(ksz9477, not_used, 16, 0, 0); static int ksz9477_i2c_probe(struct i2c_client *i2c) { + const struct ksz_chip_data *chip; + struct device *ddev = &i2c->dev; struct regmap_config rc; struct ksz_device *dev; int i, ret; @@ -24,6 +26,12 @@ static int ksz9477_i2c_probe(struct i2c_client *i2c) if (!dev) return -ENOMEM; + chip = device_get_match_data(ddev); + if (!chip) + return -EINVAL; + + /* Save chip id to do special initialization when probing. */ + dev->chip_id = chip->chip_id; for (i = 0; i < __KSZ_NUM_REGMAPS; i++) { rc = ksz9477_regmap_config[i]; rc.lock_arg = &dev->regmap_mutex; @@ -66,17 +74,14 @@ static void ksz9477_i2c_shutdown(struct i2c_client *i2c) if (!dev) return; - if (dev->dev_ops->reset) - dev->dev_ops->reset(dev); - - dsa_switch_shutdown(dev->ds); + ksz_switch_shutdown(dev); i2c_set_clientdata(i2c, NULL); } static const struct i2c_device_id ksz9477_i2c_id[] = { - { "ksz9477-switch", 0 }, - {}, + { "ksz9477-switch" }, + {} }; MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id); @@ -107,17 +112,29 @@ static const struct of_device_id ksz9477_dt_ids[] = { .data = &ksz_switch_chips[KSZ8563] }, { + .compatible = "microchip,ksz8567", + .data = &ksz_switch_chips[KSZ8567] + }, + { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, + { + .compatible = "microchip,lan9646", + .data = &ksz_switch_chips[LAN9646] + }, {}, }; MODULE_DEVICE_TABLE(of, ksz9477_dt_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_i2c_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct i2c_driver ksz9477_i2c_driver = { .driver = { .name = "ksz9477-switch", .of_match_table = ksz9477_dt_ids, + .pm = &ksz_i2c_pm_ops, }, .probe = ksz9477_i2c_probe, .remove = ksz9477_i2c_remove, diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index cba3dba58bc3..61ea11e3338e 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 register definitions * - * Copyright (C) 2017-2018 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_REGS_H @@ -38,11 +38,6 @@ #define SWITCH_REVISION_S 4 #define SWITCH_RESET 0x01 -#define REG_SW_PME_CTRL 0x0006 - -#define PME_ENABLE BIT(1) -#define PME_POLARITY BIT(0) - #define REG_GLOBAL_OPTIONS 0x000F #define SW_GIGABIT_ABLE BIT(6) @@ -112,19 +107,6 @@ #define REG_SW_IBA_SYNC__1 0x010C -#define REG_SW_IO_STRENGTH__1 0x010D -#define SW_DRIVE_STRENGTH_M 0x7 -#define SW_DRIVE_STRENGTH_2MA 0 -#define SW_DRIVE_STRENGTH_4MA 1 -#define SW_DRIVE_STRENGTH_8MA 2 -#define SW_DRIVE_STRENGTH_12MA 3 -#define SW_DRIVE_STRENGTH_16MA 4 -#define SW_DRIVE_STRENGTH_20MA 5 -#define SW_DRIVE_STRENGTH_24MA 6 -#define SW_DRIVE_STRENGTH_28MA 7 -#define SW_HI_SPEED_DRIVE_STRENGTH_S 4 -#define SW_LO_SPEED_DRIVE_STRENGTH_S 0 - #define REG_SW_IBA_STATUS__4 0x0110 #define SW_IBA_REQ BIT(31) @@ -166,13 +148,6 @@ #define SW_DOUBLE_TAG BIT(7) #define SW_RESET BIT(1) -#define REG_SW_MAC_ADDR_0 0x0302 -#define REG_SW_MAC_ADDR_1 0x0303 -#define REG_SW_MAC_ADDR_2 0x0304 -#define REG_SW_MAC_ADDR_3 0x0305 -#define REG_SW_MAC_ADDR_4 0x0306 -#define REG_SW_MAC_ADDR_5 0x0307 - #define REG_SW_MTU__2 0x0308 #define REG_SW_MTU_MASK GENMASK(13, 0) @@ -190,8 +165,6 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) #define SW_AGE_CNT_M GENMASK(5, 3) -#define SW_AGE_CNT_S 3 -#define SW_AGE_PERIOD_10_8_M GENMASK(10, 8) #define SW_RESV_MCAST_ENABLE BIT(2) #define SW_HASH_OPTION_M 0x03 #define SW_HASH_OPTION_CRC 1 @@ -267,6 +240,7 @@ #define REG_SW_MAC_CTRL_1 0x0331 #define SW_BACK_PRESSURE BIT(5) +#define SW_BACK_PRESSURE_COLLISION 0 #define FAIR_FLOW_CTRL BIT(4) #define NO_EXC_COLLISION_DROP BIT(3) #define SW_JUMBO_PACKET BIT(2) @@ -423,7 +397,6 @@ #define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1) #define ALU_STAT_START BIT(7) -#define ALU_RESV_MCAST_ADDR BIT(1) #define REG_SW_ALU_VAL_A 0x0420 @@ -826,13 +799,6 @@ #define REG_PORT_AVB_SR_1_TYPE 0x0008 #define REG_PORT_AVB_SR_2_TYPE 0x000A -#define REG_PORT_PME_STATUS 0x0013 -#define REG_PORT_PME_CTRL 0x0017 - -#define PME_WOL_MAGICPKT BIT(2) -#define PME_WOL_LINKUP BIT(1) -#define PME_WOL_ENERGY BIT(0) - #define REG_PORT_INT_STATUS 0x001B #define REG_PORT_INT_MASK 0x001F @@ -862,8 +828,8 @@ #define REG_PORT_STATUS_0 0x0030 -#define PORT_INTF_SPEED_M 0x3 -#define PORT_INTF_SPEED_S 3 +#define PORT_INTF_SPEED_MASK GENMASK(4, 3) +#define PORT_INTF_SPEED_NONE GENMASK(1, 0) #define PORT_INTF_FULL_DUPLEX BIT(2) #define PORT_TX_FLOW_CTRL BIT(1) #define PORT_RX_FLOW_CTRL BIT(0) @@ -1187,6 +1153,11 @@ #define PORT_RMII_CLK_SEL BIT(7) #define PORT_MII_SEL_EDGE BIT(5) +#define REG_PMAVBC 0x03AC + +#define PMAVBC_MASK GENMASK(26, 16) +#define PMAVBC_MIN 0x580 + /* 4 - MAC */ #define REG_PORT_MAC_CTRL_0 0x0400 @@ -1514,6 +1485,7 @@ #define PORT_QM_TX_CNT_USED_S 0 #define PORT_QM_TX_CNT_M (BIT(11) - 1) +#define PORT_QM_TX_CNT_MAX 0x200 #define REG_PORT_QM_TX_CNT_1__4 0x0A14 diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c new file mode 100644 index 000000000000..ca7830ab168a --- /dev/null +++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +#include "ksz9477.h" +#include "ksz9477_reg.h" +#include "ksz_common.h" + +#define ETHER_TYPE_FULL_MASK cpu_to_be16(~0) +#define KSZ9477_MAX_TC 7 + +/** + * ksz9477_flower_parse_key_l2 - Parse Layer 2 key from flow rule and configure + * ACL entries accordingly. + * @dev: Pointer to the ksz_device. + * @port: Port number. + * @extack: Pointer to the netlink_ext_ack. + * @rule: Pointer to the flow_rule. + * @cookie: The cookie to associate with the entry. + * @prio: The priority of the entry. + * + * This function parses the Layer 2 key from the flow rule and configures + * the corresponding ACL entries. It checks for unsupported offloads and + * available entries before proceeding with the configuration. + * + * Returns: 0 on success or a negative error code on failure. + */ +static int ksz9477_flower_parse_key_l2(struct ksz_device *dev, int port, + struct netlink_ext_ack *extack, + struct flow_rule *rule, + unsigned long cookie, u32 prio) +{ + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + struct flow_match_eth_addrs ematch; + struct ksz9477_acl_entries *acles; + int required_entries; + u8 *src_mac = NULL; + u8 *dst_mac = NULL; + u16 ethtype = 0; + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { + struct flow_match_basic match; + + flow_rule_match_basic(rule, &match); + + if (match.key->n_proto) { + if (match.mask->n_proto != ETHER_TYPE_FULL_MASK) { + NL_SET_ERR_MSG_MOD(extack, + "ethernet type mask must be a full mask"); + return -EINVAL; + } + + ethtype = be16_to_cpu(match.key->n_proto); + } + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { + flow_rule_match_eth_addrs(rule, &ematch); + + if (!is_zero_ether_addr(ematch.key->src)) { + if (!is_broadcast_ether_addr(ematch.mask->src)) + goto not_full_mask_err; + + src_mac = ematch.key->src; + } + + if (!is_zero_ether_addr(ematch.key->dst)) { + if (!is_broadcast_ether_addr(ematch.mask->dst)) + goto not_full_mask_err; + + dst_mac = ematch.key->dst; + } + } + + acles = &acl->acles; + /* ACL supports only one MAC per entry */ + required_entries = src_mac && dst_mac ? 2 : 1; + + /* Check if there are enough available entries */ + if (acles->entries_count + required_entries > KSZ9477_ACL_MAX_ENTRIES) { + NL_SET_ERR_MSG_MOD(extack, "ACL entry limit reached"); + return -EOPNOTSUPP; + } + + ksz9477_acl_match_process_l2(dev, port, ethtype, src_mac, dst_mac, + cookie, prio); + + return 0; + +not_full_mask_err: + NL_SET_ERR_MSG_MOD(extack, "MAC address mask must be a full mask"); + return -EOPNOTSUPP; +} + +/** + * ksz9477_flower_parse_key - Parse flow rule keys for a specified port on a + * ksz_device. + * @dev: The ksz_device instance. + * @port: The port number to parse the flow rule keys for. + * @extack: The netlink extended ACK for reporting errors. + * @rule: The flow_rule to parse. + * @cookie: The cookie to associate with the entry. + * @prio: The priority of the entry. + * + * This function checks if the used keys in the flow rule are supported by + * the device and parses the L2 keys if they match. If unsupported keys are + * used, an error message is set in the extended ACK. + * + * Returns: 0 on success or a negative error code on failure. + */ +static int ksz9477_flower_parse_key(struct ksz_device *dev, int port, + struct netlink_ext_ack *extack, + struct flow_rule *rule, + unsigned long cookie, u32 prio) +{ + struct flow_dissector *dissector = rule->match.dissector; + int ret; + + if (dissector->used_keys & + ~(BIT_ULL(FLOW_DISSECTOR_KEY_BASIC) | + BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS) | + BIT_ULL(FLOW_DISSECTOR_KEY_CONTROL))) { + NL_SET_ERR_MSG_MOD(extack, + "Unsupported keys used"); + return -EOPNOTSUPP; + } + + if (flow_rule_match_has_control_flags(rule, extack)) + return -EOPNOTSUPP; + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) || + flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { + ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule, + cookie, prio); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz9477_flower_parse_action - Parse flow rule actions for a specified port + * on a ksz_device. + * @dev: The ksz_device instance. + * @port: The port number to parse the flow rule actions for. + * @extack: The netlink extended ACK for reporting errors. + * @cls: The flow_cls_offload instance containing the flow rule. + * @entry_idx: The index of the ACL entry to store the action. + * + * This function checks if the actions in the flow rule are supported by + * the device. Currently, only actions that change priorities are supported. + * If unsupported actions are encountered, an error message is set in the + * extended ACK. + * + * Returns: 0 on success or a negative error code on failure. + */ +static int ksz9477_flower_parse_action(struct ksz_device *dev, int port, + struct netlink_ext_ack *extack, + struct flow_cls_offload *cls, + int entry_idx) +{ + struct flow_rule *rule = flow_cls_offload_flow_rule(cls); + struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv; + const struct flow_action_entry *act; + struct ksz9477_acl_entry *entry; + bool prio_force = false; + u8 prio_val = 0; + int i; + + if (TC_H_MIN(cls->classid)) { + NL_SET_ERR_MSG_MOD(extack, "hw_tc is not supported. Use: action skbedit prio"); + return -EOPNOTSUPP; + } + + flow_action_for_each(i, act, &rule->action) { + switch (act->id) { + case FLOW_ACTION_PRIORITY: + if (act->priority > KSZ9477_MAX_TC) { + NL_SET_ERR_MSG_MOD(extack, "Priority value is too high"); + return -EOPNOTSUPP; + } + prio_force = true; + prio_val = act->priority; + break; + default: + NL_SET_ERR_MSG_MOD(extack, "action not supported"); + return -EOPNOTSUPP; + } + } + + /* pick entry to store action */ + entry = &acl->acles.entries[entry_idx]; + + ksz9477_acl_action_rule_cfg(entry->entry, prio_force, prio_val); + ksz9477_acl_processing_rule_set_action(entry->entry, entry_idx); + + return 0; +} + +/** + * ksz9477_cls_flower_add - Add a flow classification rule for a specified port + * on a ksz_device. + * @ds: The DSA switch instance. + * @port: The port number to add the flow classification rule to. + * @cls: The flow_cls_offload instance containing the flow rule. + * @ingress: A flag indicating if the rule is applied on the ingress path. + * + * This function adds a flow classification rule for a specified port on a + * ksz_device. It checks if the ACL offloading is supported and parses the flow + * keys and actions. If the ACL is not supported, it returns an error. If there + * are unprocessed entries, it parses the action for the rule. + * + * Returns: 0 on success or a negative error code on failure. + */ +int ksz9477_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct flow_rule *rule = flow_cls_offload_flow_rule(cls); + struct netlink_ext_ack *extack = cls->common.extack; + struct ksz_device *dev = ds->priv; + struct ksz9477_acl_priv *acl; + int action_entry_idx; + int ret; + + acl = dev->ports[port].acl_priv; + + if (!acl) { + NL_SET_ERR_MSG_MOD(extack, "ACL offloading is not supported"); + return -EOPNOTSUPP; + } + + /* A complex rule set can take multiple entries. Use first entry + * to store the action. + */ + action_entry_idx = acl->acles.entries_count; + + ret = ksz9477_flower_parse_key(dev, port, extack, rule, cls->cookie, + cls->common.prio); + if (ret) + return ret; + + ret = ksz9477_flower_parse_action(dev, port, extack, cls, + action_entry_idx); + if (ret) + return ret; + + ret = ksz9477_sort_acl_entries(dev, port); + if (ret) + return ret; + + return ksz9477_acl_write_list(dev, port); +} + +/** + * ksz9477_cls_flower_del - Remove a flow classification rule for a specified + * port on a ksz_device. + * @ds: The DSA switch instance. + * @port: The port number to remove the flow classification rule from. + * @cls: The flow_cls_offload instance containing the flow rule. + * @ingress: A flag indicating if the rule is applied on the ingress path. + * + * This function removes a flow classification rule for a specified port on a + * ksz_device. It checks if the ACL is initialized, and if not, returns an + * error. If the ACL is initialized, it removes entries with the specified + * cookie and rewrites the ACL list. + * + * Returns: 0 on success or a negative error code on failure. + */ +int ksz9477_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + unsigned long cookie = cls->cookie; + struct ksz_device *dev = ds->priv; + struct ksz9477_acl_priv *acl; + + acl = dev->ports[port].acl_priv; + + if (!acl) + return -EOPNOTSUPP; + + ksz9477_acl_remove_entries(dev, port, &acl->acles, cookie); + + return ksz9477_acl_write_list(dev, port); +} diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 6673122266b7..0c10351fe5eb 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/delay.h> @@ -16,17 +16,21 @@ #include <linux/etherdevice.h> #include <linux/if_bridge.h> #include <linux/if_vlan.h> +#include <linux/if_hsr.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/micrel_phy.h> +#include <linux/pinctrl/consumer.h> #include <net/dsa.h> +#include <net/ieee8021q.h> #include <net/pkt_cls.h> #include <net/switchdev.h> #include "ksz_common.h" +#include "ksz_dcb.h" #include "ksz_ptp.h" #include "ksz8.h" #include "ksz9477.h" @@ -186,7 +190,181 @@ static const struct ksz_mib_names ksz9477_mib_names[] = { { 0x83, "tx_discards" }, }; -static const struct ksz_dev_ops ksz8_dev_ops = { +struct ksz_driver_strength_prop { + const char *name; + int offset; + int value; +}; + +enum ksz_driver_strength_type { + KSZ_DRIVER_STRENGTH_HI, + KSZ_DRIVER_STRENGTH_LO, + KSZ_DRIVER_STRENGTH_IO, +}; + +/** + * struct ksz_drive_strength - drive strength mapping + * @reg_val: register value + * @microamp: microamp value + */ +struct ksz_drive_strength { + u32 reg_val; + u32 microamp; +}; + +/* ksz9477_drive_strengths - Drive strength mapping for KSZ9477 variants + * + * This values are not documented in KSZ9477 variants but confirmed by + * Microchip that KSZ9477, KSZ9567, KSZ8567, KSZ9897, KSZ9896, KSZ9563, KSZ9893 + * and KSZ8563 are using same register (drive strength) settings like KSZ8795. + * + * Documentation in KSZ8795CLX provides more information with some + * recommendations: + * - for high speed signals + * 1. 4 mA or 8 mA is often used for MII, RMII, and SPI interface with using + * 2.5V or 3.3V VDDIO. + * 2. 12 mA or 16 mA is often used for MII, RMII, and SPI interface with + * using 1.8V VDDIO. + * 3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V + * or 3.3V VDDIO. + * 4. 28 mA is often used for GMII/RGMII interface with using 1.8V VDDIO. + * 5. In same interface, the heavy loading should use higher one of the + * drive current strength. + * - for low speed signals + * 1. 3.3V VDDIO, use either 4 mA or 8 mA. + * 2. 2.5V VDDIO, use either 8 mA or 12 mA. + * 3. 1.8V VDDIO, use either 12 mA or 16 mA. + * 4. If it is heavy loading, can use higher drive current strength. + */ +static const struct ksz_drive_strength ksz9477_drive_strengths[] = { + { SW_DRIVE_STRENGTH_2MA, 2000 }, + { SW_DRIVE_STRENGTH_4MA, 4000 }, + { SW_DRIVE_STRENGTH_8MA, 8000 }, + { SW_DRIVE_STRENGTH_12MA, 12000 }, + { SW_DRIVE_STRENGTH_16MA, 16000 }, + { SW_DRIVE_STRENGTH_20MA, 20000 }, + { SW_DRIVE_STRENGTH_24MA, 24000 }, + { SW_DRIVE_STRENGTH_28MA, 28000 }, +}; + +/* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, .. + * variants. + * This values are documented in KSZ8873 and KSZ8863 datasheets. + */ +static const struct ksz_drive_strength ksz88x3_drive_strengths[] = { + { 0, 8000 }, + { KSZ8873_DRIVE_STRENGTH_16MA, 16000 }, +}; + +static void ksz88x3_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state); +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface); + +/** + * ksz_phylink_mac_disable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * + * This function is a dummy handler. See ksz_phylink_mac_enable_tx_lpi() for + * a detailed explanation of EEE/LPI handling in KSZ switches. + */ +static void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ +} + +/** + * ksz_phylink_mac_enable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * @timer: timer value before entering LPI (unused) + * @tx_clock_stop: whether to stop the TX clock in LPI mode (unused) + * + * This function signals to phylink that the driver architecture supports + * LPI management, enabling phylink to control EEE advertisement during + * negotiation according to IEEE Std 802.3 (Clause 78). + * + * Hardware Management of EEE/LPI State: + * For KSZ switch ports with integrated PHYs (e.g., KSZ9893R ports 1-2), + * observation and testing suggest that the actual EEE / Low Power Idle (LPI) + * state transitions are managed autonomously by the hardware based on + * the auto-negotiation results. (Note: While the datasheet describes EEE + * operation based on negotiation, it doesn't explicitly detail the internal + * MAC/PHY interaction, so autonomous hardware management of the MAC state + * for LPI is inferred from observed behavior). + * This hardware control, consistent with the switch's ability to operate + * autonomously via strapping, means MAC-level software intervention is not + * required or exposed for managing the LPI state once EEE is negotiated. + * (Ref: KSZ9893R Data Sheet DS00002420D, primarily Section 4.7.5 explaining + * EEE, also Sections 4.1.7 on Auto-Negotiation and 3.2.1 on Configuration + * Straps). + * + * Additionally, ports configured as MAC interfaces (e.g., KSZ9893R port 3) + * lack documented MAC-level LPI control. + * + * Therefore, this callback performs no action and serves primarily to inform + * phylink of LPI awareness and to document the inferred hardware behavior. + * + * Returns: 0 (Always success) + */ +static int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + return 0; +} + +static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { + .mac_config = ksz88x3_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct phylink_mac_ops ksz8_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct ksz_dev_ops ksz8463_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8463_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8463_r_phy, + .w_phy = ksz8463_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz88xx_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, +}; + +static const struct ksz_dev_ops ksz88xx_dev_ops = { .setup = ksz8_setup, .get_port_addr = ksz8_get_port_addr, .cfg_port_member = ksz8_cfg_port_member, @@ -216,15 +394,78 @@ static const struct ksz_dev_ops ksz8_dev_ops = { .init = ksz8_switch_init, .exit = ksz8_switch_exit, .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, +}; + +static const struct ksz_dev_ops ksz87xx_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8_r_phy, + .w_phy = ksz8_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, + .pme_write8 = ksz8_pme_write8, + .pme_pread8 = ksz8_pme_pread8, + .pme_pwrite8 = ksz8_pme_pwrite8, }; -static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause); +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + +static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, +}; + static const struct ksz_dev_ops ksz9477_dev_ops = { .setup = ksz9477_setup, .get_port_addr = ksz9477_get_port_addr, @@ -251,13 +492,24 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .mdb_add = ksz9477_mdb_add, .mdb_del = ksz9477_mdb_del, .change_mtu = ksz9477_change_mtu, - .phylink_mac_link_up = ksz9477_phylink_mac_link_up, + .pme_write8 = ksz_write8, + .pme_pread8 = ksz_pread8, + .pme_pwrite8 = ksz_pwrite8, .config_cpu_port = ksz9477_config_cpu_port, .tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc, .enable_stp_addr = ksz9477_enable_stp_addr, .reset = ksz9477_reset_switch, .init = ksz9477_switch_init, .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, +}; + +static const struct phylink_mac_ops lan937x_phylink_mac_ops = { + .mac_config = ksz_phylink_mac_config, + .mac_link_down = ksz_phylink_mac_link_down, + .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops lan937x_dev_ops = { @@ -268,6 +520,8 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, .port_setup = lan937x_port_setup, .set_ageing_time = lan937x_set_ageing_time, + .mdio_bus_preinit = lan937x_mdio_bus_preinit, + .create_phy_addr_map = lan937x_create_phy_addr_map, .r_phy = lan937x_r_phy, .w_phy = lan937x_w_phy, .r_mib_cnt = ksz9477_r_mib_cnt, @@ -288,7 +542,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .mdb_add = ksz9477_mdb_add, .mdb_del = ksz9477_mdb_del, .change_mtu = lan937x_change_mtu, - .phylink_mac_link_up = ksz9477_phylink_mac_link_up, .config_cpu_port = lan937x_config_cpu_port, .tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc, .enable_stp_addr = ksz9477_enable_stp_addr, @@ -297,7 +550,62 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .exit = lan937x_switch_exit, }; +static const u16 ksz8463_regs[] = { + [REG_SW_MAC_ADDR] = 0x10, + [REG_IND_CTRL_0] = 0x30, + [REG_IND_DATA_8] = 0x26, + [REG_IND_DATA_CHECK] = 0x26, + [REG_IND_DATA_HI] = 0x28, + [REG_IND_DATA_LO] = 0x2C, + [REG_IND_MIB_CHECK] = 0x2F, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x0F, + [S_TAIL_TAG_CTRL] = 0xAD, + [P_STP_CTRL] = 0x6F, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8463_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(3), + [SW_TAIL_TAG_ENABLE] = BIT(0), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(15, 12), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16), + [VLAN_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_USE_FID] = BIT(21), + [STATIC_MAC_TABLE_FID] = GENMASK(25, 22), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(20), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22), +}; + +static u8 ksz8463_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 22, + [DYNAMIC_MAC_ENTRIES_H] = 8, + [DYNAMIC_MAC_ENTRIES] = 24, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 22, + [DYNAMIC_MAC_SRC_PORT] = 20, +}; + static const u16 ksz8795_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, [REG_IND_CTRL_0] = 0x6E, [REG_IND_DATA_8] = 0x70, [REG_IND_DATA_CHECK] = 0x72, @@ -318,6 +626,9 @@ static const u16 ksz8795_regs[] = { [S_MULTICAST_CTRL] = 0x04, [P_XMII_CTRL_0] = 0x06, [P_XMII_CTRL_1] = 0x06, + [REG_SW_PME_CTRL] = 0x8003, + [REG_PORT_PME_STATUS] = 0x8003, + [REG_PORT_PME_CTRL] = 0x8007, }; static const u32 ksz8795_masks[] = { @@ -373,6 +684,7 @@ static const u8 ksz8795_shifts[] = { }; static const u16 ksz8863_regs[] = { + [REG_SW_MAC_ADDR] = 0x70, [REG_IND_CTRL_0] = 0x79, [REG_IND_DATA_8] = 0x7B, [REG_IND_DATA_CHECK] = 0x7B, @@ -425,18 +737,79 @@ static u8 ksz8863_shifts[] = { [DYNAMIC_MAC_SRC_PORT] = 20, }; +static const u16 ksz8895_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, + [REG_IND_CTRL_0] = 0x6E, + [REG_IND_DATA_8] = 0x70, + [REG_IND_DATA_CHECK] = 0x72, + [REG_IND_DATA_HI] = 0x71, + [REG_IND_DATA_LO] = 0x75, + [REG_IND_MIB_CHECK] = 0x75, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x09, + [S_TAIL_TAG_CTRL] = 0x0C, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8895_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(7), + [SW_TAIL_TAG_ENABLE] = BIT(1), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(6, 0), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7), + [VLAN_TABLE_VALID] = BIT(12), + [STATIC_MAC_TABLE_VALID] = BIT(21), + [STATIC_MAC_TABLE_USE_FID] = BIT(23), + [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), +}; + +static const u8 ksz8895_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 7, + [VLAN_TABLE] = 13, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 24, + [DYNAMIC_MAC_ENTRIES_H] = 3, + [DYNAMIC_MAC_ENTRIES] = 29, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 27, + [DYNAMIC_MAC_SRC_PORT] = 24, +}; + static const u16 ksz9477_regs[] = { + [REG_SW_MAC_ADDR] = 0x0302, [P_STP_CTRL] = 0x0B04, [S_START_CTRL] = 0x0300, [S_BROADCAST_CTRL] = 0x0332, [S_MULTICAST_CTRL] = 0x0331, [P_XMII_CTRL_0] = 0x0300, [P_XMII_CTRL_1] = 0x0301, + [REG_SW_PME_CTRL] = 0x0006, + [REG_PORT_PME_STATUS] = 0x0013, + [REG_PORT_PME_CTRL] = 0x0017, }; static const u32 ksz9477_masks[] = { [ALU_STAT_WRITE] = 0, [ALU_STAT_READ] = 1, + [ALU_STAT_DIRECT] = 0, + [ALU_RESV_MCAST_ADDR] = BIT(1), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -464,6 +837,8 @@ static const u8 ksz9477_xmii_ctrl1[] = { static const u32 lan937x_masks[] = { [ALU_STAT_WRITE] = 1, [ALU_STAT_READ] = 2, + [ALU_STAT_DIRECT] = BIT(3), + [ALU_RESV_MCAST_ADDR] = BIT(2), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -827,8 +1202,7 @@ static const struct regmap_range ksz9477_valid_regs[] = { regmap_reg_range(0x701b, 0x701b), regmap_reg_range(0x701f, 0x7020), regmap_reg_range(0x7030, 0x7030), - regmap_reg_range(0x7200, 0x7203), - regmap_reg_range(0x7206, 0x7207), + regmap_reg_range(0x7200, 0x7207), regmap_reg_range(0x7300, 0x7301), regmap_reg_range(0x7400, 0x7401), regmap_reg_range(0x7403, 0x7403), @@ -892,10 +1266,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x1030, 0x1030), regmap_reg_range(0x1100, 0x1115), regmap_reg_range(0x111a, 0x111f), - regmap_reg_range(0x1122, 0x1127), - regmap_reg_range(0x112a, 0x112b), - regmap_reg_range(0x1136, 0x1139), - regmap_reg_range(0x113e, 0x113f), + regmap_reg_range(0x1120, 0x112b), + regmap_reg_range(0x1134, 0x113b), + regmap_reg_range(0x113c, 0x113f), regmap_reg_range(0x1400, 0x1401), regmap_reg_range(0x1403, 0x1403), regmap_reg_range(0x1410, 0x1417), @@ -922,10 +1295,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x2030, 0x2030), regmap_reg_range(0x2100, 0x2115), regmap_reg_range(0x211a, 0x211f), - regmap_reg_range(0x2122, 0x2127), - regmap_reg_range(0x212a, 0x212b), - regmap_reg_range(0x2136, 0x2139), - regmap_reg_range(0x213e, 0x213f), + regmap_reg_range(0x2120, 0x212b), + regmap_reg_range(0x2134, 0x213b), + regmap_reg_range(0x213c, 0x213f), regmap_reg_range(0x2400, 0x2401), regmap_reg_range(0x2403, 0x2403), regmap_reg_range(0x2410, 0x2417), @@ -952,10 +1324,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x3030, 0x3030), regmap_reg_range(0x3100, 0x3115), regmap_reg_range(0x311a, 0x311f), - regmap_reg_range(0x3122, 0x3127), - regmap_reg_range(0x312a, 0x312b), - regmap_reg_range(0x3136, 0x3139), - regmap_reg_range(0x313e, 0x313f), + regmap_reg_range(0x3120, 0x312b), + regmap_reg_range(0x3134, 0x313b), + regmap_reg_range(0x313c, 0x313f), regmap_reg_range(0x3400, 0x3401), regmap_reg_range(0x3403, 0x3403), regmap_reg_range(0x3410, 0x3417), @@ -982,10 +1353,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x4030, 0x4030), regmap_reg_range(0x4100, 0x4115), regmap_reg_range(0x411a, 0x411f), - regmap_reg_range(0x4122, 0x4127), - regmap_reg_range(0x412a, 0x412b), - regmap_reg_range(0x4136, 0x4139), - regmap_reg_range(0x413e, 0x413f), + regmap_reg_range(0x4120, 0x412b), + regmap_reg_range(0x4134, 0x413b), + regmap_reg_range(0x413c, 0x413f), regmap_reg_range(0x4400, 0x4401), regmap_reg_range(0x4403, 0x4403), regmap_reg_range(0x4410, 0x4417), @@ -1012,10 +1382,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x5030, 0x5030), regmap_reg_range(0x5100, 0x5115), regmap_reg_range(0x511a, 0x511f), - regmap_reg_range(0x5122, 0x5127), - regmap_reg_range(0x512a, 0x512b), - regmap_reg_range(0x5136, 0x5139), - regmap_reg_range(0x513e, 0x513f), + regmap_reg_range(0x5120, 0x512b), + regmap_reg_range(0x5134, 0x513b), + regmap_reg_range(0x513c, 0x513f), regmap_reg_range(0x5400, 0x5401), regmap_reg_range(0x5403, 0x5403), regmap_reg_range(0x5410, 0x5417), @@ -1042,10 +1411,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x6030, 0x6030), regmap_reg_range(0x6100, 0x6115), regmap_reg_range(0x611a, 0x611f), - regmap_reg_range(0x6122, 0x6127), - regmap_reg_range(0x612a, 0x612b), - regmap_reg_range(0x6136, 0x6139), - regmap_reg_range(0x613e, 0x613f), + regmap_reg_range(0x6120, 0x612b), + regmap_reg_range(0x6134, 0x613b), + regmap_reg_range(0x613c, 0x613f), regmap_reg_range(0x6300, 0x6301), regmap_reg_range(0x6400, 0x6401), regmap_reg_range(0x6403, 0x6403), @@ -1084,6 +1452,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), @@ -1110,6 +1479,29 @@ static const struct regmap_access_table ksz8873_register_set = { }; const struct ksz_chip_data ksz_switch_chips[] = { + [KSZ8463] = { + .chip_id = KSZ8463_CHIP_ID, + .dev_name = "KSZ8463", + .num_vlans = 16, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x4, /* can be configured as cpu port */ + .port_cnt = 3, + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz8463_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8463_regs, + .masks = ksz8463_masks, + .shifts = ksz8463_shifts, + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .internal_phy = {true, true, false}, + }, + [KSZ8563] = { .chip_id = KSZ8563_CHIP_ID, .dev_name = "KSZ8563", @@ -1120,9 +1512,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1136,6 +1529,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {false, false, true}, + .ptp_capable = true, .wr_table = &ksz8563_register_set, .rd_table = &ksz8563_register_set, }, @@ -1145,11 +1539,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8795", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, - .ops = &ksz8_dev_ops, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1184,11 +1580,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8794", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, - .ops = &ksz8_dev_ops, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1209,11 +1607,13 @@ const struct ksz_chip_data ksz_switch_chips[] = { .dev_name = "KSZ8765", .num_vlans = 4096, .num_alus = 0, - .num_statics = 8, + .num_statics = 32, .cpu_ports = 0x10, /* can be configured as cpu port */ .port_cnt = 5, /* total cpu and user ports */ .num_tx_queues = 4, - .ops = &ksz8_dev_ops, + .num_ipms = 4, + .ops = &ksz87xx_dev_ops, + .phylink_mac_ops = &ksz8_phylink_mac_ops, .ksz87xx_eee_link_erratum = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1229,8 +1629,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, false}, }, - [KSZ8830] = { - .chip_id = KSZ8830_CHIP_ID, + [KSZ88X3] = { + .chip_id = KSZ88X3_CHIP_ID, .dev_name = "KSZ8863/KSZ8873", .num_vlans = 16, .num_alus = 0, @@ -1238,7 +1638,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .cpu_ports = 0x4, /* can be configured as cpu port */ .port_cnt = 3, .num_tx_queues = 4, - .ops = &ksz8_dev_ops, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1252,6 +1654,61 @@ const struct ksz_chip_data ksz_switch_chips[] = { .rd_table = &ksz8873_register_set, }, + [KSZ8864] = { + /* WARNING + * ======= + * KSZ8864 is similar to KSZ8895, except the first port + * does not exist. + * external cpu + * KSZ8864 1,2,3 4 + * KSZ8895 0,1,2,3 4 + * port_cnt is configured as 5, even though it is 4 + */ + .chip_id = KSZ8864_CHIP_ID, + .dev_name = "KSZ8864", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {false, true, true, true, false}, + }, + + [KSZ8895] = { + .chip_id = KSZ8895_CHIP_ID, + .dev_name = "KSZ8895", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + [KSZ9477] = { .chip_id = KSZ9477_CHIP_ID, .dev_name = "KSZ9477", @@ -1262,9 +1719,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 4, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1282,6 +1741,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -1296,7 +1757,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 6, /* total physical port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1328,7 +1792,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1358,7 +1825,9 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 2, .num_tx_queues = 4, + .num_ipms = 8, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1384,9 +1853,10 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, /* total port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1400,6 +1870,43 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {true, true, true}, + .ptp_capable = true, + }, + + [KSZ8567] = { + .chip_id = KSZ8567_CHIP_ID, + .dev_name = "KSZ8567", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total port count */ + .port_nirqs = 3, + .num_tx_queues = 4, + .num_ipms = 8, + .tc_cbs_supported = true, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {false, false, false, false, false, + true, true}, + .ptp_capable = true, }, [KSZ9567] = { @@ -1412,8 +1919,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 7, /* total physical port count */ .port_nirqs = 3, .num_tx_queues = 4, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, .ops = &ksz9477_dev_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), @@ -1432,6 +1939,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, }, [LAN9370] = { @@ -1444,9 +1952,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 5, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1459,6 +1969,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true}, .supports_rgmii = {false, false, false, false, true}, .internal_phy = {true, true, true, true, false}, + .ptp_capable = true, }, [LAN9371] = { @@ -1471,9 +1982,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 6, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1486,6 +1999,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true, true}, .supports_rgmii = {false, false, false, false, true, true}, .internal_phy = {true, true, true, true, false, false}, + .ptp_capable = true, }, [LAN9372] = { @@ -1498,9 +2012,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 8, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1517,6 +2033,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, }, [LAN9373] = { @@ -1529,9 +2046,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 5, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1548,6 +2067,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, false, false, false, true, true}, + .ptp_capable = true, }, [LAN9374] = { @@ -1560,9 +2080,11 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 8, /* total physical port count */ .port_nirqs = 6, .num_tx_queues = 8, + .num_ipms = 8, .tc_cbs_supported = true, - .tc_ets_supported = true, + .phy_side_mdio_supported = true, .ops = &lan937x_dev_ops, + .phylink_mac_ops = &lan937x_phylink_mac_ops, .mib_names = ksz9477_mib_names, .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1579,6 +2101,43 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, + }, + + [LAN9646] = { + .chip_id = LAN9646_CHIP_ID, + .dev_name = "LAN9646", + .num_vlans = 4096, + .num_alus = 4096, + .num_statics = 16, + .cpu_ports = 0x7F, /* can be configured as cpu port */ + .port_cnt = 7, /* total physical port count */ + .port_nirqs = 4, + .num_tx_queues = 4, + .num_ipms = 8, + .ops = &ksz9477_dev_ops, + .phylink_mac_ops = &ksz9477_phylink_mac_ops, + .phy_errata_9477 = true, + .mib_names = ksz9477_mib_names, + .mib_cnt = ARRAY_SIZE(ksz9477_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz9477_regs, + .masks = ksz9477_masks, + .shifts = ksz9477_shifts, + .xmii_ctrl0 = ksz9477_xmii_ctrl0, + .xmii_ctrl1 = ksz9477_xmii_ctrl1, + .supports_mii = {false, false, false, false, + false, true, true}, + .supports_rmii = {false, false, false, false, + false, true, true}, + .supports_rgmii = {false, false, false, false, + false, true, true}, + .internal_phy = {true, true, true, true, + true, false, false}, + .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, + .wr_table = &ksz9477_register_set, + .rd_table = &ksz9477_register_set, }, }; EXPORT_SYMBOL_GPL(ksz_switch_chips); @@ -1599,15 +2158,23 @@ static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num) static int ksz_check_device_id(struct ksz_device *dev) { - const struct ksz_chip_data *dt_chip_data; + const struct ksz_chip_data *expected_chip_data; + u32 expected_chip_id; - dt_chip_data = of_device_get_match_data(dev->dev); + if (dev->pdata) { + expected_chip_id = dev->pdata->chip_id; + expected_chip_data = ksz_lookup_info(expected_chip_id); + if (WARN_ON(!expected_chip_data)) + return -ENODEV; + } else { + expected_chip_data = of_device_get_match_data(dev->dev); + expected_chip_id = expected_chip_data->chip_id; + } - /* Check for Device Tree and Chip ID */ - if (dt_chip_data->chip_id != dev->chip_id) { + if (expected_chip_id != dev->chip_id) { dev_err(dev->dev, "Device tree specifies chip %s but found %s, please fix it!\n", - dt_chip_data->dev_name, dev->info->dev_name); + expected_chip_data->dev_name, dev->info->dev_name); return -ENODEV; } @@ -1641,6 +2208,18 @@ static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, if (dev->dev_ops->get_caps) dev->dev_ops->get_caps(dev, port, config); + + if (ds->ops->support_eee && ds->ops->support_eee(ds, port)) { + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); + + config->lpi_capabilities = MAC_100FD; + if (dev->info->gbit_capable[port]) + config->lpi_capabilities |= MAC_1000FD; + + /* EEE is fully operational */ + config->eee_enabled_default = true; + } } void ksz_r_mib_stats64(struct ksz_device *dev, int port) @@ -1649,6 +2228,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) struct rtnl_link_stats64 *stats; struct ksz_stats_raw *raw; struct ksz_port_mib *mib; + int ret; mib = &dev->ports[port].mib; stats = &mib->stats64; @@ -1690,6 +2270,12 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) pstats->rx_pause_frames = raw->rx_pause; spin_unlock(&mib->stats64_lock); + + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { + ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); + if (ret) + dev_err(dev->dev, "Failed to monitor transmission halt\n"); + } } void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port) @@ -1776,12 +2362,33 @@ static void ksz_get_strings(struct dsa_switch *ds, int port, if (stringset != ETH_SS_STATS) return; - for (i = 0; i < dev->info->mib_cnt; i++) { - memcpy(buf + i * ETH_GSTRING_LEN, - dev->info->mib_names[i].string, ETH_GSTRING_LEN); - } + for (i = 0; i < dev->info->mib_cnt; i++) + ethtool_puts(&buf, dev->info->mib_names[i].string); } +/** + * ksz_update_port_member - Adjust port forwarding rules based on STP state and + * isolation settings. + * @dev: A pointer to the struct ksz_device representing the device. + * @port: The port number to adjust. + * + * This function dynamically adjusts the port membership configuration for a + * specified port and other device ports, based on Spanning Tree Protocol (STP) + * states and port isolation settings. Each port, including the CPU port, has a + * membership register, represented as a bitfield, where each bit corresponds + * to a port number. A set bit indicates permission to forward frames to that + * port. This function iterates over all ports, updating the membership register + * to reflect current forwarding permissions: + * + * 1. Forwards frames only to ports that are part of the same bridge group and + * in the BR_STATE_FORWARDING state. + * 2. Takes into account the isolation status of ports; ports in the + * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward + * frames to each other, even if they are in the same bridge group. + * 3. Ensures that the CPU port is included in the membership based on its + * upstream port configuration, allowing for management and control traffic + * to flow as required. + */ static void ksz_update_port_member(struct ksz_device *dev, int port) { struct ksz_port *p = &dev->ports[port]; @@ -1810,7 +2417,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) if (other_p->stp_state != BR_STATE_FORWARDING) continue; - if (p->stp_state == BR_STATE_FORWARDING) { + /* At this point we know that "port" and "other" port [i] are in + * the same bridge group and that "other" port [i] is in + * forwarding stp state. If "port" is also in forwarding stp + * state, we can allow forwarding from port [port] to port [i]. + * Except if both ports are isolated. + */ + if (p->stp_state == BR_STATE_FORWARDING && + !(p->isolated && other_p->isolated)) { val |= BIT(port); port_member |= BIT(i); } @@ -1829,14 +2443,31 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) third_p = &dev->ports[j]; if (third_p->stp_state != BR_STATE_FORWARDING) continue; + third_dp = dsa_to_port(ds, j); - if (dsa_port_bridge_same(other_dp, third_dp)) + + /* Now we updating relation of the "other" port [i] to + * the "third" port [j]. We already know that "other" + * port [i] is in forwarding stp state and that "third" + * port [j] is in forwarding stp state too. + * We need to check if "other" port [i] and "third" port + * [j] are in the same bridge group and not isolated + * before allowing forwarding from port [i] to port [j]. + */ + if (dsa_port_bridge_same(other_dp, third_dp) && + !(other_p->isolated && third_p->isolated)) val |= BIT(j); } dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); } + /* HSR ports are setup once so need to use the assigned membership + * when the port is enabled. + */ + if (!port_member && p->stp_state == BR_STATE_FORWARDING && + (dev->hsr_ports & BIT(port))) + port_member = dev->hsr_ports; dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); } @@ -1861,76 +2492,298 @@ static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, return dev->dev_ops->w_phy(dev, addr, regnum, val); } +/** + * ksz_parent_mdio_read - Read data from a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to read. + * + * This function provides a direct read operation on the parent MDIO bus for + * accessing PHY registers. By bypassing SPI or I2C, it uses the parent MDIO bus + * to retrieve data from the PHY registers at the specified address and register + * number. + * + * Return: Value of the PHY register, or a negative error code on failure. + */ +static int ksz_parent_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_read_nested(dev->parent_mdio_bus, addr, regnum); +} + +/** + * ksz_parent_mdio_write - Write data to a PHY register on the parent MDIO bus. + * @bus: MDIO bus structure. + * @addr: PHY address on the parent MDIO bus. + * @regnum: Register number to write to. + * @val: Value to write to the PHY register. + * + * This function provides a direct write operation on the parent MDIO bus for + * accessing PHY registers. Bypassing SPI or I2C, it uses the parent MDIO bus + * to modify the PHY register values at the specified address. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parent_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct ksz_device *dev = bus->priv; + + return mdiobus_write_nested(dev->parent_mdio_bus, addr, regnum, val); +} + +/** + * ksz_phy_addr_to_port - Map a PHY address to the corresponding switch port. + * @dev: Pointer to device structure. + * @addr: PHY address to map to a port. + * + * This function finds the corresponding switch port for a given PHY address by + * iterating over all user ports on the device. It checks if a port's PHY + * address in `phy_addr_map` matches the specified address and if the port + * contains an internal PHY. If a match is found, the index of the port is + * returned. + * + * Return: Port index on success, or -EINVAL if no matching port is found. + */ +static int ksz_phy_addr_to_port(struct ksz_device *dev, int addr) +{ + struct dsa_switch *ds = dev->ds; + struct dsa_port *dp; + + dsa_switch_for_each_user_port(dp, ds) { + if (dev->info->internal_phy[dp->index] && + dev->phy_addr_map[dp->index] == addr) + return dp->index; + } + + return -EINVAL; +} + +/** + * ksz_irq_phy_setup - Configure IRQs for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Sets up IRQs for each active PHY connected to the KSZ switch by mapping the + * appropriate IRQs for each PHY and assigning them to the `user_mii_bus` in + * the DSA switch structure. Each IRQ is mapped based on the port's IRQ domain. + * + * Return: 0 on success, or a negative error code on failure. + */ static int ksz_irq_phy_setup(struct ksz_device *dev) { struct dsa_switch *ds = dev->ds; - int phy; + int phy, port; int irq; int ret; - for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) { + for (phy = 0; phy < PHY_MAX_ADDR; phy++) { if (BIT(phy) & ds->phys_mii_mask) { - irq = irq_find_mapping(dev->ports[phy].pirq.domain, + port = ksz_phy_addr_to_port(dev, phy); + if (port < 0) { + ret = port; + goto out; + } + + irq = irq_find_mapping(dev->ports[port].pirq.domain, PORT_SRC_PHY_INT); - if (irq < 0) { - ret = irq; + if (!irq) { + ret = -EINVAL; goto out; } - ds->slave_mii_bus->irq[phy] = irq; + ds->user_mii_bus->irq[phy] = irq; } } return 0; out: while (phy--) if (BIT(phy) & ds->phys_mii_mask) - irq_dispose_mapping(ds->slave_mii_bus->irq[phy]); + irq_dispose_mapping(ds->user_mii_bus->irq[phy]); return ret; } +/** + * ksz_irq_phy_free - Release IRQ mappings for PHYs in the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * Releases any IRQ mappings previously assigned to active PHYs in the KSZ + * switch by disposing of each mapped IRQ in the `user_mii_bus` structure. + */ static void ksz_irq_phy_free(struct ksz_device *dev) { struct dsa_switch *ds = dev->ds; int phy; - for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) + for (phy = 0; phy < PHY_MAX_ADDR; phy++) if (BIT(phy) & ds->phys_mii_mask) - irq_dispose_mapping(ds->slave_mii_bus->irq[phy]); + irq_dispose_mapping(ds->user_mii_bus->irq[phy]); +} + +/** + * ksz_parse_dt_phy_config - Parse and validate PHY configuration from DT + * @dev: pointer to the KSZ device structure + * @bus: pointer to the MII bus structure + * @mdio_np: pointer to the MDIO node in the device tree + * + * This function parses and validates PHY configurations for each user port + * defined in the device tree for a KSZ switch device. It verifies that the + * `phy-handle` properties are correctly set and that the internal PHYs match + * expected addresses and parent nodes. Sets up the PHY mask in the MII bus if + * all validations pass. Logs error messages for any mismatches or missing data. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_parse_dt_phy_config(struct ksz_device *dev, struct mii_bus *bus, + struct device_node *mdio_np) +{ + struct device_node *phy_node, *phy_parent_node; + bool phys_are_valid = true; + struct dsa_port *dp; + u32 phy_addr; + int ret; + + dsa_switch_for_each_user_port(dp, dev->ds) { + if (!dev->info->internal_phy[dp->index]) + continue; + + phy_node = of_parse_phandle(dp->dn, "phy-handle", 0); + if (!phy_node) { + dev_err(dev->dev, "failed to parse phy-handle for port %d.\n", + dp->index); + phys_are_valid = false; + continue; + } + + phy_parent_node = of_get_parent(phy_node); + if (!phy_parent_node) { + dev_err(dev->dev, "failed to get PHY-parent node for port %d\n", + dp->index); + phys_are_valid = false; + } else if (phy_parent_node != mdio_np) { + dev_err(dev->dev, "PHY-parent node mismatch for port %d, expected %pOF, got %pOF\n", + dp->index, mdio_np, phy_parent_node); + phys_are_valid = false; + } else { + ret = of_property_read_u32(phy_node, "reg", &phy_addr); + if (ret < 0) { + dev_err(dev->dev, "failed to read PHY address for port %d. Error %d\n", + dp->index, ret); + phys_are_valid = false; + } else if (phy_addr != dev->phy_addr_map[dp->index]) { + dev_err(dev->dev, "PHY address mismatch for port %d, expected 0x%x, got 0x%x\n", + dp->index, dev->phy_addr_map[dp->index], + phy_addr); + phys_are_valid = false; + } else { + bus->phy_mask |= BIT(phy_addr); + } + } + + of_node_put(phy_node); + of_node_put(phy_parent_node); + } + + if (!phys_are_valid) + return -EINVAL; + + return 0; } +/** + * ksz_mdio_register - Register and configure the MDIO bus for the KSZ device. + * @dev: Pointer to the KSZ device structure. + * + * This function sets up and registers an MDIO bus for the KSZ switch device, + * allowing access to its internal PHYs. If the device supports side MDIO, + * the function will configure the external MDIO controller specified by the + * "mdio-parent-bus" device tree property to directly manage internal PHYs. + * Otherwise, SPI or I2C access is set up for PHY access. + * + * Return: 0 on success, or a negative error code on failure. + */ static int ksz_mdio_register(struct ksz_device *dev) { + struct device_node *parent_bus_node; + struct mii_bus *parent_bus = NULL; struct dsa_switch *ds = dev->ds; struct device_node *mdio_np; struct mii_bus *bus; - int ret; + int ret, i; mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio"); if (!mdio_np) return 0; + parent_bus_node = of_parse_phandle(mdio_np, "mdio-parent-bus", 0); + if (parent_bus_node && !dev->info->phy_side_mdio_supported) { + dev_err(dev->dev, "Side MDIO bus is not supported for this HW, ignoring 'mdio-parent-bus' property.\n"); + ret = -EINVAL; + + goto put_mdio_node; + } else if (parent_bus_node) { + parent_bus = of_mdio_find_bus(parent_bus_node); + if (!parent_bus) { + ret = -EPROBE_DEFER; + + goto put_mdio_node; + } + + dev->parent_mdio_bus = parent_bus; + } + bus = devm_mdiobus_alloc(ds->dev); if (!bus) { - of_node_put(mdio_np); - return -ENOMEM; + ret = -ENOMEM; + goto put_mdio_node; + } + + if (dev->dev_ops->mdio_bus_preinit) { + ret = dev->dev_ops->mdio_bus_preinit(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } + + if (dev->dev_ops->create_phy_addr_map) { + ret = dev->dev_ops->create_phy_addr_map(dev, !!parent_bus); + if (ret) + goto put_mdio_node; + } else { + for (i = 0; i < dev->info->port_cnt; i++) + dev->phy_addr_map[i] = i; } bus->priv = dev; - bus->read = ksz_sw_mdio_read; - bus->write = ksz_sw_mdio_write; - bus->name = "ksz slave smi"; - snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + if (parent_bus) { + bus->read = ksz_parent_mdio_read; + bus->write = ksz_parent_mdio_write; + bus->name = "KSZ side MDIO"; + snprintf(bus->id, MII_BUS_ID_SIZE, "ksz-side-mdio-%d", + ds->index); + } else { + bus->read = ksz_sw_mdio_read; + bus->write = ksz_sw_mdio_write; + bus->name = "ksz user smi"; + if (ds->dst->index != 0) { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d-%d", ds->dst->index, ds->index); + } else { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + } + } + + ret = ksz_parse_dt_phy_config(dev, bus, mdio_np); + if (ret) + goto put_mdio_node; + + ds->phys_mii_mask = bus->phy_mask; bus->parent = ds->dev; - bus->phy_mask = ~ds->phys_mii_mask; - ds->slave_mii_bus = bus; + ds->user_mii_bus = bus; if (dev->irq > 0) { ret = ksz_irq_phy_setup(dev); - if (ret) { - of_node_put(mdio_np); - return ret; - } + if (ret) + goto put_mdio_node; } ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np); @@ -1941,7 +2794,9 @@ static int ksz_mdio_register(struct ksz_device *dev) ksz_irq_phy_free(dev); } +put_mdio_node: of_node_put(mdio_np); + of_node_put(parent_bus_node); return ret; } @@ -1973,7 +2828,7 @@ static void ksz_irq_bus_sync_unlock(struct irq_data *d) struct ksz_device *dev = kirq->dev; int ret; - ret = ksz_write32(dev, kirq->reg_mask, kirq->masked); + ret = ksz_write8(dev, kirq->reg_mask, kirq->masked); if (ret) dev_err(dev->dev, "failed to change IRQ mask\n"); @@ -2052,8 +2907,8 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) kirq->dev = dev; kirq->masked = ~0; - kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0, - &ksz_irq_domain_ops, kirq); + kirq->domain = irq_domain_create_simple(dev_fwnode(dev->dev), kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); if (!kirq->domain) return -ENOMEM; @@ -2097,15 +2952,18 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p) snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p); pirq->irq_num = irq_find_mapping(dev->girq.domain, p); - if (pirq->irq_num < 0) - return pirq->irq_num; + if (!pirq->irq_num) + return -EINVAL; return ksz_irq_common_setup(dev, pirq); } +static int ksz_parse_drive_strength(struct ksz_device *dev); + static int ksz_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + u16 storm_mask, storm_rate; struct dsa_port *dp; struct ksz_port *p; const u16 *regs; @@ -2124,11 +2982,25 @@ static int ksz_setup(struct dsa_switch *ds) return ret; } + ret = ksz_parse_drive_strength(dev); + if (ret) + return ret; + + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + /* set broadcast storm protection 10% rate */ + storm_mask = BROADCAST_STORM_RATE; + storm_rate = (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; + if (ksz_is_ksz8463(dev)) { + storm_mask = swab16(storm_mask); + storm_rate = swab16(storm_rate); + } regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], - BROADCAST_STORM_RATE, - (BROADCAST_STORM_VALUE * - BROADCAST_STORM_PROT_RATE) / 100); + storm_mask, storm_rate); dev->dev_ops->config_cpu_port(ds); @@ -2142,6 +3014,7 @@ static int ksz_setup(struct dsa_switch *ds) ksz_init_mib_timer(dev); ds->configure_vlan_while_not_filtering = false; + ds->dscp_prio_mapping_is_global = true; if (dev->dev_ops->setup) { ret = dev->dev_ops->setup(ds); @@ -2165,18 +3038,23 @@ static int ksz_setup(struct dsa_switch *ds) dsa_switch_for_each_user_port(dp, dev->ds) { ret = ksz_pirq_setup(dev, dp->index); if (ret) - goto out_girq; + goto port_release; - ret = ksz_ptp_irq_setup(ds, dp->index); - if (ret) - goto out_pirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_irq_setup(ds, dp->index); + if (ret) + goto pirq_release; + } } } - ret = ksz_ptp_clock_register(ds); - if (ret) { - dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret); - goto out_ptpirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_clock_register(ds); + if (ret) { + dev_err(dev->dev, "Failed to register PTP clock: %d\n", + ret); + goto port_release; + } } ret = ksz_mdio_register(dev); @@ -2185,6 +3063,10 @@ static int ksz_setup(struct dsa_switch *ds) goto out_ptp_clock_unregister; } + ret = ksz_dcb_init(dev); + if (ret) + goto out_ptp_clock_unregister; + /* start switch */ regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL], SW_START, SW_START); @@ -2192,18 +3074,18 @@ static int ksz_setup(struct dsa_switch *ds) return 0; out_ptp_clock_unregister: - ksz_ptp_clock_unregister(ds); -out_ptpirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) - ksz_ptp_irq_free(ds, dp->index); -out_pirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); +port_release: + if (dev->irq > 0) { + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); +pirq_release: ksz_irq_free(&dev->ports[dp->index].pirq); -out_girq: - if (dev->irq > 0) + } ksz_irq_free(&dev->girq); + } return ret; } @@ -2213,11 +3095,13 @@ static void ksz_teardown(struct dsa_switch *ds) struct ksz_device *dev = ds->priv; struct dsa_port *dp; - ksz_ptp_clock_unregister(ds); + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); if (dev->irq > 0) { dsa_switch_for_each_user_port(dp, dev->ds) { - ksz_ptp_irq_free(ds, dp->index); + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); ksz_irq_free(&dev->ports[dp->index].pirq); } @@ -2275,7 +3159,7 @@ static void ksz_mib_read_work(struct work_struct *work) if (!p->read) { const struct dsa_port *dp = dsa_to_port(dev->ds, i); - if (!netif_carrier_ok(dp->slave)) + if (!netif_carrier_ok(dp->user)) mib->cnt_ptr = dev->info->reg_mib_cnt; } port_r_cnt(dev, i); @@ -2335,26 +3219,29 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; - if (dev->chip_id == KSZ8830_CHIP_ID) { + switch (dev->chip_id) { + case KSZ88X3_CHIP_ID: /* Silicon Errata Sheet (DS80000830A): * Port 1 does not work with LinkMD Cable-Testing. * Port 1 does not respond to received PAUSE control frames. */ if (!port) return MICREL_KSZ8_P1_ERRATA; + break; } return 0; } -static void ksz_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, phy_interface_t interface) +static void ksz_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) { - struct ksz_device *dev = ds->priv; - struct ksz_port *p = &dev->ports[port]; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; /* Read all MIB counters when the link is going down. */ - p->read = true; + dev->ports[dp->index].read = true; /* timer started */ if (dev->mib_read_interval) schedule_delayed_work(&dev->mib_read, 0); @@ -2381,7 +3268,7 @@ static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, mutex_lock(&mib->cnt_mutex); /* Only read dropped counters if no link. */ - if (!netif_carrier_ok(dp->slave)) + if (!netif_carrier_ok(dp->user)) mib->cnt_ptr = dev->info->reg_mib_cnt; port_r_cnt(dev, port); memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64)); @@ -2484,22 +3371,51 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port, return dev->dev_ops->mdb_del(dev, port, mdb, db); } -static int ksz_enable_port(struct dsa_switch *ds, int port, - struct phy_device *phy) +static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev, + int port) +{ + u32 queue_map = 0; + int ipm; + + for (ipm = 0; ipm < dev->info->num_ipms; ipm++) { + int queue; + + /* Traffic Type (TT) is corresponding to the Internal Priority + * Map (IPM) in the switch. Traffic Class (TC) is + * corresponding to the queue in the switch. + */ + queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues); + if (queue < 0) + return queue; + + queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S); + } + + return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); +} + +static int ksz_port_setup(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; + int ret; if (!dsa_is_user_port(ds, port)) return 0; - /* setup slave port */ + /* setup user port */ dev->dev_ops->port_setup(dev, port, false); + if (!is_ksz8(dev)) { + ret = ksz9477_set_default_prio_queue_mapping(dev, port); + if (ret) + return ret; + } + /* port_stp_state_set() will be called after to enable the port so * there is no need to do anything. */ - return 0; + return ksz_dcb_init_port(dev, port); } void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) @@ -2548,11 +3464,30 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) ksz_update_port_member(dev, port); } +static void ksz_port_teardown(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + if (dsa_is_user_port(ds, port)) + ksz9477_port_acl_free(dev, port); + } +} + static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~BR_LEARNING) + if (flags.mask & ~(BR_LEARNING | BR_ISOLATED)) return -EINVAL; return 0; @@ -2565,8 +3500,12 @@ static int ksz_port_bridge_flags(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; struct ksz_port *p = &dev->ports[port]; - if (flags.mask & BR_LEARNING) { - p->learning = !!(flags.val & BR_LEARNING); + if (flags.mask & (BR_LEARNING | BR_ISOLATED)) { + if (flags.mask & BR_LEARNING) + p->learning = !!(flags.val & BR_LEARNING); + + if (flags.mask & BR_ISOLATED) + p->isolated = !!(flags.val & BR_ISOLATED); /* Make the change take effect immediately */ ksz_port_stp_state_set(ds, port, p->stp_state); @@ -2582,25 +3521,26 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, struct ksz_device *dev = ds->priv; enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE; - if (dev->chip_id == KSZ8795_CHIP_ID || - dev->chip_id == KSZ8794_CHIP_ID || - dev->chip_id == KSZ8765_CHIP_ID) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) proto = DSA_TAG_PROTO_KSZ8795; - if (dev->chip_id == KSZ8830_CHIP_ID || + if (dev->chip_id == KSZ88X3_CHIP_ID || + dev->chip_id == KSZ8463_CHIP_ID || dev->chip_id == KSZ8563_CHIP_ID || dev->chip_id == KSZ9893_CHIP_ID || dev->chip_id == KSZ9563_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9893; - if (dev->chip_id == KSZ9477_CHIP_ID || + if (dev->chip_id == KSZ8567_CHIP_ID || + dev->chip_id == KSZ9477_CHIP_ID || dev->chip_id == KSZ9896_CHIP_ID || dev->chip_id == KSZ9897_CHIP_ID || - dev->chip_id == KSZ9567_CHIP_ID) + dev->chip_id == KSZ9567_CHIP_ID || + dev->chip_id == LAN9646_CHIP_ID) proto = DSA_TAG_PROTO_KSZ9477; if (is_lan937x(dev)) - proto = DSA_TAG_PROTO_LAN937X_VALUE; + proto = DSA_TAG_PROTO_LAN937X; return proto; } @@ -2610,10 +3550,18 @@ static int ksz_connect_tag_protocol(struct dsa_switch *ds, { struct ksz_tagger_data *tagger_data; - tagger_data = ksz_tagger_data(ds); - tagger_data->xmit_work_fn = ksz_port_deferred_xmit; - - return 0; + switch (proto) { + case DSA_TAG_PROTO_KSZ8795: + return 0; + case DSA_TAG_PROTO_KSZ9893: + case DSA_TAG_PROTO_KSZ9477: + case DSA_TAG_PROTO_LAN937X: + tagger_data = ksz_tagger_data(ds); + tagger_data->xmit_work_fn = ksz_port_deferred_xmit; + return 0; + default: + return -EPROTONOSUPPORT; + } } static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, @@ -2690,9 +3638,13 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; - case KSZ8830_CHIP_ID: + case KSZ8463_CHIP_ID: + case KSZ88X3_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: case KSZ9567_CHIP_ID: @@ -2704,62 +3656,74 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case LAN9372_CHIP_ID: case LAN9373_CHIP_ID: case LAN9374_CHIP_ID: + case LAN9646_CHIP_ID: return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; } return -EOPNOTSUPP; } -static int ksz_validate_eee(struct dsa_switch *ds, int port) +/** + * ksz_support_eee - Determine Energy Efficient Ethernet (EEE) support for a + * port + * @ds: Pointer to the DSA switch structure + * @port: Port number to check + * + * This function also documents devices where EEE was initially advertised but + * later withdrawn due to reliability issues, as described in official errata + * documents. These devices are explicitly listed to record known limitations, + * even if there is no technical necessity for runtime checks. + * + * Returns: true if the internal PHY on the given port supports fully + * operational EEE, false otherwise. + */ +static bool ksz_support_eee(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; if (!dev->info->internal_phy[port]) - return -EOPNOTSUPP; + return false; switch (dev->chip_id) { case KSZ8563_CHIP_ID: - case KSZ9477_CHIP_ID: case KSZ9563_CHIP_ID: - case KSZ9567_CHIP_ID: case KSZ9893_CHIP_ID: + return true; + case KSZ8567_CHIP_ID: + /* KSZ8567R Errata DS80000752C Module 4 */ + case KSZ8765_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8795_CHIP_ID: + /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ + case KSZ9477_CHIP_ID: + /* KSZ9477S Errata DS80000754A Module 4 */ + case KSZ9567_CHIP_ID: + /* KSZ9567S Errata DS80000756A Module 4 */ case KSZ9896_CHIP_ID: + /* KSZ9896C Errata DS80000757A Module 3 */ case KSZ9897_CHIP_ID: - return 0; + case LAN9646_CHIP_ID: + /* KSZ9897R Errata DS80000758C Module 4 */ + /* Energy Efficient Ethernet (EEE) feature select must be + * manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + * + * The same item appears in the errata for all switches above. + */ + break; } - return -EOPNOTSUPP; -} - -static int ksz_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; - - /* There is no documented control of Tx LPI configuration. */ - e->tx_lpi_enabled = true; - - /* There is no documented control of Tx LPI timer. According to tests - * Tx LPI timer seems to be set by default to minimal value. - */ - e->tx_lpi_timer = 0; - - return 0; + return false; } static int ksz_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { struct ksz_device *dev = ds->priv; - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; if (!e->tx_lpi_enabled) { dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); @@ -2805,7 +3769,8 @@ static void ksz_set_xmii(struct ksz_device *dev, int port, /* On KSZ9893, disable RGMII in-band status support */ if (dev->chip_id == KSZ9893_CHIP_ID || dev->chip_id == KSZ8563_CHIP_ID || - dev->chip_id == KSZ9563_CHIP_ID) + dev->chip_id == KSZ9563_CHIP_ID || + is_lan937x(dev)) data8 &= ~P_MII_MAC_MODE; break; default: @@ -2842,7 +3807,7 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) else interface = PHY_INTERFACE_MODE_MII; } else if (val == bitval[P_RMII_SEL]) { - interface = PHY_INTERFACE_MODE_RGMII; + interface = PHY_INTERFACE_MODE_RMII; } else { interface = PHY_INTERFACE_MODE_RGMII; if (data8 & P_RGMII_ID_EG_ENABLE) @@ -2857,19 +3822,32 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) return interface; } -static void ksz_phylink_mac_config(struct dsa_switch *ds, int port, +static void ksz88x3_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + + dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN); +} + +static void ksz_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct ksz_device *dev = ds->priv; - - if (ksz_is_ksz88x3(dev)) - return; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; /* Internal PHYs */ if (dev->info->internal_phy[port]) return; + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + if (phylink_autoneg_inband(mode)) { dev_err(dev->dev, "In-band AN not supported!\n"); return; @@ -2877,9 +3855,6 @@ static void ksz_phylink_mac_config(struct dsa_switch *ds, int port, ksz_set_xmii(dev, port, state->interface); - if (dev->dev_ops->phylink_mac_config) - dev->dev_ops->phylink_mac_config(dev, port, mode, state); - if (dev->dev_ops->setup_rgmii_delay) dev->dev_ops->setup_rgmii_delay(dev, port); } @@ -2977,13 +3952,16 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex, ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val); } -static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, +static void ksz9477_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause) { + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + int port = dp->index; struct ksz_port *p; p = &dev->ports[port]; @@ -2999,20 +3977,6 @@ static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port, ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause); } -static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, bool rx_pause) -{ - struct ksz_device *dev = ds->priv; - - if (dev->dev_ops->phylink_mac_link_up) - dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, - phydev, speed, duplex, - tx_pause, rx_pause); -} - static int ksz_switch_detect(struct ksz_device *dev) { u8 id1, id2, id4; @@ -3029,6 +3993,9 @@ static int ksz_switch_detect(struct ksz_device *dev) id2 = FIELD_GET(SW_CHIP_ID_M, id16); switch (id1) { + case KSZ84_FAMILY_ID: + dev->chip_id = KSZ8463_CHIP_ID; + break; case KSZ87_FAMILY_ID: if (id2 == KSZ87_CHIP_ID_95) { u8 val; @@ -3046,10 +4013,22 @@ static int ksz_switch_detect(struct ksz_device *dev) break; case KSZ88_FAMILY_ID: if (id2 == KSZ88_CHIP_ID_63) - dev->chip_id = KSZ8830_CHIP_ID; + dev->chip_id = KSZ88X3_CHIP_ID; else return -ENODEV; break; + case KSZ8895_FAMILY_ID: + if (id2 == KSZ8895_CHIP_ID_95 || + id2 == KSZ8895_CHIP_ID_95R) + dev->chip_id = KSZ8895_CHIP_ID; + else + return -ENODEV; + ret = ksz_read8(dev, REG_KSZ8864_CHIP_ID, &id4); + if (ret) + return ret; + if (id4 & SW_KSZ8864) + dev->chip_id = KSZ8864_CHIP_ID; + break; default: ret = ksz_read32(dev, REG_CHIP_ID0, &id32); if (ret) @@ -3063,12 +4042,16 @@ static int ksz_switch_detect(struct ksz_device *dev) case KSZ9896_CHIP_ID: case KSZ9897_CHIP_ID: case KSZ9567_CHIP_ID: + case KSZ8567_CHIP_ID: case LAN9370_CHIP_ID: case LAN9371_CHIP_ID: case LAN9372_CHIP_ID: case LAN9373_CHIP_ID: case LAN9374_CHIP_ID: - dev->chip_id = id32; + + /* LAN9646 does not have its own chip id. */ + if (dev->chip_id != LAN9646_CHIP_ID) + dev->chip_id = id32; break; case KSZ9893_CHIP_ID: ret = ksz_read8(dev, REG_CHIP_ID4, @@ -3093,6 +4076,48 @@ static int ksz_switch_detect(struct ksz_device *dev) return 0; } +static int ksz_cls_flower_add(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_cls_flower_add(ds, port, cls, ingress); + } + + return -EOPNOTSUPP; +} + +static int ksz_cls_flower_del(struct dsa_switch *ds, int port, + struct flow_cls_offload *cls, bool ingress) +{ + struct ksz_device *dev = ds->priv; + + switch (dev->chip_id) { + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_cls_flower_del(ds, port, cls, ingress); + } + + return -EOPNOTSUPP; +} + /* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth * is converted to Hex-decimal using the successive multiplication method. On * every step, integer part is taken and decimal part is carry forwarded. @@ -3212,6 +4237,104 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, return p->bands - 1 - band; } +static u8 ksz8463_tc_ctrl(int port, int queue) +{ + u8 reg; + + reg = 0xC8 + port * 4; + reg += ((3 - queue) / 2) * 2; + reg++; + reg -= (queue & 1); + return reg; +} + +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) { int ret; @@ -3273,7 +4396,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port, for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) { int queue; - if (tc_prio > KSZ9477_MAX_TC_PRIO) + if (tc_prio >= dev->info->num_ipms) break; queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]); @@ -3285,8 +4408,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port, static int ksz_tc_ets_del(struct ksz_device *dev, int port) { - int ret, queue, tc_prio, s; - u32 queue_map = 0; + int ret, queue; /* To restore the default chip configuration, set all queues to use the * WRR scheduler with a weight of 1. @@ -3294,35 +4416,15 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) for (queue = 0; queue < dev->info->num_tx_queues; queue++) { ret = ksz_queue_set_wrr(dev, port, queue, KSZ9477_DEFAULT_WRR_WEIGHT); + if (ret) return ret; } - switch (dev->info->num_tx_queues) { - case 2: - s = 2; - break; - case 4: - s = 1; - break; - case 8: - s = 0; - break; - default: - return -EINVAL; - } - /* Revert the queue mapping for TC-priority to its default setting on * the chip. */ - for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) { - int queue; - - queue = tc_prio >> s; - queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S); - } - - return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map); + return ksz9477_set_default_prio_queue_mapping(dev, port); } static int ksz_tc_ets_validate(struct ksz_device *dev, int port, @@ -3367,7 +4469,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (!dev->info->tc_ets_supported) + if (is_ksz8(dev) && !(ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -3381,9 +4483,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, if (ret) return ret; - return ksz_tc_ets_add(dev, port, &qopt->replace_params); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); case TC_ETS_DESTROY: - return ksz_tc_ets_del(dev, port); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); case TC_ETS_STATS: case TC_ETS_GRAFT: return -EOPNOTSUPP; @@ -3405,6 +4514,452 @@ static int ksz_setup_tc(struct dsa_switch *ds, int port, } } +/** + * ksz_handle_wake_reason - Handle wake reason on a specified port. + * @dev: The device structure. + * @port: The port number. + * + * This function reads the PME (Power Management Event) status register of a + * specified port to determine the wake reason. If there is no wake event, it + * returns early. Otherwise, it logs the wake reason which could be due to a + * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register + * is then cleared to acknowledge the handling of the wake event. + * + * Return: 0 on success, or an error code on failure. + */ +int ksz_handle_wake_reason(struct ksz_device *dev, int port) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_status; + int ret; + + ret = ops->pme_pread8(dev, port, regs[REG_PORT_PME_STATUS], + &pme_status); + if (ret) + return ret; + + if (!pme_status) + return 0; + + dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port, + pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "", + pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "", + pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : ""); + + return ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_STATUS], + pme_status); +} + +/** + * ksz_get_wol - Get Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function checks the device PME wakeup_source flag and chip_id. + * If enabled and supported, it sets the supported and active WoL + * flags. + */ +static void ksz_get_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + u8 pme_ctrl; + int ret; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + wol->supported = WAKE_PHY; + + /* Check if the current MAC address on this port can be set + * as global for WAKE_MAGIC support. The result may vary + * dynamically based on other ports configurations. + */ + if (ksz_is_port_mac_global_usable(dev->ds, port)) + wol->supported |= WAKE_MAGIC; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl); + if (ret) + return; + + if (pme_ctrl & PME_WOL_MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY)) + wol->wolopts |= WAKE_PHY; +} + +/** + * ksz_set_wol - Set Wake-on-LAN settings for a specified port. + * @ds: The dsa_switch structure. + * @port: The port number. + * @wol: Pointer to ethtool Wake-on-LAN settings structure. + * + * This function configures Wake-on-LAN (WoL) settings for a specified + * port. It validates the provided WoL options, checks if PME is + * enabled and supported, clears any previous wake reasons, and sets + * the Magic Packet flag in the port's PME control register if + * specified. + * + * Return: 0 on success, or other error codes on failure. + */ +static int ksz_set_wol(struct dsa_switch *ds, int port, + struct ethtool_wolinfo *wol) +{ + u8 pme_ctrl = 0, pme_ctrl_old = 0; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + bool magic_switched_off; + bool magic_switched_on; + int ret; + + if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC)) + return -EINVAL; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return -EOPNOTSUPP; + + if (!dev->wakeup_source) + return -EOPNOTSUPP; + + ret = ksz_handle_wake_reason(dev, port); + if (ret) + return ret; + + if (wol->wolopts & WAKE_MAGIC) + pme_ctrl |= PME_WOL_MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY; + + ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL], + &pme_ctrl_old); + if (ret) + return ret; + + if (pme_ctrl_old == pme_ctrl) + return 0; + + magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) && + !(pme_ctrl & PME_WOL_MAGICPKT); + magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) && + (pme_ctrl & PME_WOL_MAGICPKT); + + /* To keep reference count of MAC address, we should do this + * operation only on change of WOL settings. + */ + if (magic_switched_on) { + ret = ksz_switch_macaddr_get(dev->ds, port, NULL); + if (ret) + return ret; + } else if (magic_switched_off) { + ksz_switch_macaddr_put(dev->ds); + } + + ret = dev->dev_ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL], + pme_ctrl); + if (ret) { + if (magic_switched_on) + ksz_switch_macaddr_put(dev->ds); + return ret; + } + + return 0; +} + +/** + * ksz_wol_pre_shutdown - Prepares the switch device for shutdown while + * considering Wake-on-LAN (WoL) settings. + * @dev: The switch device structure. + * @wol_enabled: Pointer to a boolean which will be set to true if WoL is + * enabled on any port. + * + * This function prepares the switch device for a safe shutdown while taking + * into account the Wake-on-LAN (WoL) settings on the user ports. It updates + * the wol_enabled flag accordingly to reflect whether WoL is active on any + * port. + */ +static void ksz_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled) +{ + const struct ksz_dev_ops *ops = dev->dev_ops; + const u16 *regs = dev->info->regs; + u8 pme_pin_en = PME_ENABLE; + struct dsa_port *dp; + int ret; + + *wol_enabled = false; + + if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev)) + return; + + if (!dev->wakeup_source) + return; + + dsa_switch_for_each_user_port(dp, dev->ds) { + u8 pme_ctrl = 0; + + ret = ops->pme_pread8(dev, dp->index, + regs[REG_PORT_PME_CTRL], &pme_ctrl); + if (!ret && pme_ctrl) + *wol_enabled = true; + + /* make sure there are no pending wake events which would + * prevent the device from going to sleep/shutdown. + */ + ksz_handle_wake_reason(dev, dp->index); + } + + /* Now we are save to enable PME pin. */ + if (*wol_enabled) { + if (dev->pme_active_high) + pme_pin_en |= PME_POLARITY; + ops->pme_write8(dev, regs[REG_SW_PME_CTRL], pme_pin_en); + if (ksz_is_ksz87xx(dev)) + ksz_write8(dev, KSZ87XX_REG_INT_EN, KSZ87XX_INT_PME_MASK); + } +} + +static int ksz_port_set_mac_address(struct dsa_switch *ds, int port, + const unsigned char *addr) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct ethtool_wolinfo wol; + + if (dp->hsr_dev) { + dev_err(ds->dev, + "Cannot change MAC address on port %d with active HSR offload\n", + port); + return -EBUSY; + } + + /* Need to initialize variable as the code to fill in settings may + * not be executed. + */ + wol.wolopts = 0; + + ksz_get_wol(ds, dp->index, &wol); + if (wol.wolopts & WAKE_MAGIC) { + dev_err(ds->dev, + "Cannot change MAC address on port %d with active Wake on Magic Packet\n", + port); + return -EBUSY; + } + + return 0; +} + +/** + * ksz_is_port_mac_global_usable - Check if the MAC address on a given port + * can be used as a global address. + * @ds: Pointer to the DSA switch structure. + * @port: The port number on which the MAC address is to be checked. + * + * This function examines the MAC address set on the specified port and + * determines if it can be used as a global address for the switch. + * + * Return: true if the port's MAC address can be used as a global address, false + * otherwise. + */ +bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port) +{ + struct net_device *user = dsa_to_port(ds, port)->user; + const unsigned char *addr = user->dev_addr; + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (switch_macaddr && !ether_addr_equal(switch_macaddr->addr, addr)) + return false; + + return true; +} + +/** + * ksz_switch_macaddr_get - Program the switch's MAC address register. + * @ds: DSA switch instance. + * @port: Port number. + * @extack: Netlink extended acknowledgment. + * + * This function programs the switch's MAC address register with the MAC address + * of the requesting user port. This single address is used by the switch for + * multiple features like HSR self-address filtering and WoL. Other user ports + * can share ownership of this address as long as their MAC address is the same. + * The MAC addresses of user ports must not change while they have ownership of + * the switch MAC address. + * + * Return: 0 on success, or other error codes on failure. + */ +int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, + struct netlink_ext_ack *extack) +{ + struct net_device *user = dsa_to_port(ds, port)->user; + const unsigned char *addr = user->dev_addr; + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + int i, ret; + + /* Make sure concurrent MAC address changes are blocked */ + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (switch_macaddr) { + if (!ether_addr_equal(switch_macaddr->addr, addr)) { + NL_SET_ERR_MSG_FMT_MOD(extack, + "Switch already configured for MAC address %pM", + switch_macaddr->addr); + return -EBUSY; + } + + refcount_inc(&switch_macaddr->refcount); + return 0; + } + + switch_macaddr = kzalloc(sizeof(*switch_macaddr), GFP_KERNEL); + if (!switch_macaddr) + return -ENOMEM; + + ether_addr_copy(switch_macaddr->addr, addr); + refcount_set(&switch_macaddr->refcount, 1); + dev->switch_macaddr = switch_macaddr; + + /* Program the switch MAC address to hardware */ + for (i = 0; i < ETH_ALEN; i++) { + if (ksz_is_ksz8463(dev)) { + u16 addr16 = ((u16)addr[i] << 8) | addr[i + 1]; + + ret = ksz_write16(dev, regs[REG_SW_MAC_ADDR] + i, + addr16); + i++; + } else { + ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, + addr[i]); + } + if (ret) + goto macaddr_drop; + } + + return 0; + +macaddr_drop: + dev->switch_macaddr = NULL; + refcount_set(&switch_macaddr->refcount, 0); + kfree(switch_macaddr); + + return ret; +} + +void ksz_switch_macaddr_put(struct dsa_switch *ds) +{ + struct ksz_switch_macaddr *switch_macaddr; + struct ksz_device *dev = ds->priv; + const u16 *regs = dev->info->regs; + int i; + + /* Make sure concurrent MAC address changes are blocked */ + ASSERT_RTNL(); + + switch_macaddr = dev->switch_macaddr; + if (!refcount_dec_and_test(&switch_macaddr->refcount)) + return; + + for (i = 0; i < ETH_ALEN; i++) + ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, 0); + + dev->switch_macaddr = NULL; + kfree(switch_macaddr); +} + +static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr, + struct netlink_ext_ack *extack) +{ + struct ksz_device *dev = ds->priv; + enum hsr_version ver; + int ret; + + ret = hsr_get_version(hsr, &ver); + if (ret) + return ret; + + if (dev->chip_id != KSZ9477_CHIP_ID) { + NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload"); + return -EOPNOTSUPP; + } + + /* KSZ9477 can support HW offloading of only 1 HSR device */ + if (dev->hsr_dev && hsr != dev->hsr_dev) { + NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR"); + return -EOPNOTSUPP; + } + + /* KSZ9477 only supports HSR v0 and v1 */ + if (!(ver == HSR_V0 || ver == HSR_V1)) { + NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported"); + return -EOPNOTSUPP; + } + + /* KSZ9477 can only perform HSR offloading for up to two ports */ + if (hweight8(dev->hsr_ports) >= 2) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot offload more than two ports - using software HSR"); + return -EOPNOTSUPP; + } + + /* Self MAC address filtering, to avoid frames traversing + * the HSR ring more than once. + */ + ret = ksz_switch_macaddr_get(ds, port, extack); + if (ret) + return ret; + + ksz9477_hsr_join(ds, port, hsr); + dev->hsr_dev = hsr; + dev->hsr_ports |= BIT(port); + + return 0; +} + +static int ksz_hsr_leave(struct dsa_switch *ds, int port, + struct net_device *hsr) +{ + struct ksz_device *dev = ds->priv; + + WARN_ON(dev->chip_id != KSZ9477_CHIP_ID); + + ksz9477_hsr_leave(ds, port, hsr); + dev->hsr_ports &= ~BIT(port); + if (!dev->hsr_ports) + dev->hsr_dev = NULL; + + ksz_switch_macaddr_put(ds); + + return 0; +} + +static int ksz_suspend(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + cancel_delayed_work_sync(&dev->mib_read); + return 0; +} + +static int ksz_resume(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + if (dev->mib_read_interval) + schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); + return 0; +} + static const struct dsa_switch_ops ksz_switch_ops = { .get_tag_protocol = ksz_get_tag_protocol, .connect_tag_protocol = ksz_connect_tag_protocol, @@ -3414,17 +4969,18 @@ static const struct dsa_switch_ops ksz_switch_ops = { .phy_read = ksz_phy_read16, .phy_write = ksz_phy_write16, .phylink_get_caps = ksz_phylink_get_caps, - .phylink_mac_config = ksz_phylink_mac_config, - .phylink_mac_link_up = ksz_phylink_mac_link_up, - .phylink_mac_link_down = ksz_mac_link_down, - .port_enable = ksz_enable_port, + .port_setup = ksz_port_setup, .set_ageing_time = ksz_set_ageing_time, .get_strings = ksz_get_strings, .get_ethtool_stats = ksz_get_ethtool_stats, .get_sset_count = ksz_sset_count, .port_bridge_join = ksz_port_bridge_join, .port_bridge_leave = ksz_port_bridge_leave, + .port_hsr_join = ksz_hsr_join, + .port_hsr_leave = ksz_hsr_leave, + .port_set_mac_address = ksz_port_set_mac_address, .port_stp_state_set = ksz_port_stp_state_set, + .port_teardown = ksz_port_teardown, .port_pre_bridge_flags = ksz_port_pre_bridge_flags, .port_bridge_flags = ksz_port_bridge_flags, .port_fast_age = ksz_port_fast_age, @@ -3442,14 +4998,27 @@ static const struct dsa_switch_ops ksz_switch_ops = { .get_pause_stats = ksz_get_pause_stats, .port_change_mtu = ksz_change_mtu, .port_max_mtu = ksz_max_mtu, + .get_wol = ksz_get_wol, + .set_wol = ksz_set_wol, + .suspend = ksz_suspend, + .resume = ksz_resume, .get_ts_info = ksz_get_ts_info, .port_hwtstamp_get = ksz_hwtstamp_get, .port_hwtstamp_set = ksz_hwtstamp_set, .port_txtstamp = ksz_port_txtstamp, .port_rxtstamp = ksz_port_rxtstamp, + .cls_flower_add = ksz_cls_flower_add, + .cls_flower_del = ksz_cls_flower_del, .port_setup_tc = ksz_setup_tc, - .get_mac_eee = ksz_get_mac_eee, + .support_eee = ksz_support_eee, .set_mac_eee = ksz_set_mac_eee, + .port_get_default_prio = ksz_port_get_default_prio, + .port_set_default_prio = ksz_port_set_default_prio, + .port_get_dscp_prio = ksz_port_get_dscp_prio, + .port_add_dscp_prio = ksz_port_add_dscp_prio, + .port_del_dscp_prio = ksz_port_del_dscp_prio, + .port_get_apptrust = ksz_port_get_apptrust, + .port_set_apptrust = ksz_port_set_apptrust, }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) @@ -3479,6 +5048,29 @@ struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) } EXPORT_SYMBOL(ksz_switch_alloc); +/** + * ksz_switch_shutdown - Shutdown routine for the switch device. + * @dev: The switch device structure. + * + * This function is responsible for initiating a shutdown sequence for the + * switch device. It invokes the reset operation defined in the device + * operations, if available, to reset the switch. Subsequently, it calls the + * DSA framework's shutdown function to ensure a proper shutdown of the DSA + * switch. + */ +void ksz_switch_shutdown(struct ksz_device *dev) +{ + bool wol_enabled = false; + + ksz_wol_pre_shutdown(dev, &wol_enabled); + + if (dev->dev_ops->reset && !wol_enabled) + dev->dev_ops->reset(dev); + + dsa_switch_shutdown(dev->ds); +} +EXPORT_SYMBOL(ksz_switch_shutdown); + static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num, struct device_node *port_dn) { @@ -3516,28 +5108,310 @@ static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num, dev->ports[port_num].rgmii_tx_val = tx_delay; } +/** + * ksz_drive_strength_to_reg() - Convert drive strength value to corresponding + * register value. + * @array: The array of drive strength values to search. + * @array_size: The size of the array. + * @microamp: The drive strength value in microamp to be converted. + * + * This function searches the array of drive strength values for the given + * microamp value and returns the corresponding register value for that drive. + * + * Returns: If found, the corresponding register value for that drive strength + * is returned. Otherwise, -EINVAL is returned indicating an invalid value. + */ +static int ksz_drive_strength_to_reg(const struct ksz_drive_strength *array, + size_t array_size, int microamp) +{ + int i; + + for (i = 0; i < array_size; i++) { + if (array[i].microamp == microamp) + return array[i].reg_val; + } + + return -EINVAL; +} + +/** + * ksz_drive_strength_error() - Report invalid drive strength value + * @dev: ksz device + * @array: The array of drive strength values to search. + * @array_size: The size of the array. + * @microamp: Invalid drive strength value in microamp + * + * This function logs an error message when an unsupported drive strength value + * is detected. It lists out all the supported drive strength values for + * reference in the error message. + */ +static void ksz_drive_strength_error(struct ksz_device *dev, + const struct ksz_drive_strength *array, + size_t array_size, int microamp) +{ + char supported_values[100]; + size_t remaining_size; + int added_len; + char *ptr; + int i; + + remaining_size = sizeof(supported_values); + ptr = supported_values; + + for (i = 0; i < array_size; i++) { + added_len = snprintf(ptr, remaining_size, + i == 0 ? "%d" : ", %d", array[i].microamp); + + if (added_len >= remaining_size) + break; + + ptr += added_len; + remaining_size -= added_len; + } + + dev_err(dev->dev, "Invalid drive strength %d, supported values are %s\n", + microamp, supported_values); +} + +/** + * ksz9477_drive_strength_write() - Set the drive strength for specific KSZ9477 + * chip variants. + * @dev: ksz device + * @props: Array of drive strength properties to be applied + * @num_props: Number of properties in the array + * + * This function configures the drive strength for various KSZ9477 chip variants + * based on the provided properties. It handles chip-specific nuances and + * ensures only valid drive strengths are written to the respective chip. + * + * Return: 0 on successful configuration, a negative error code on failure. + */ +static int ksz9477_drive_strength_write(struct ksz_device *dev, + struct ksz_driver_strength_prop *props, + int num_props) +{ + size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths); + int i, ret, reg; + u8 mask = 0; + u8 val = 0; + + if (props[KSZ_DRIVER_STRENGTH_IO].value != -1) + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + props[KSZ_DRIVER_STRENGTH_IO].name); + + if (dev->chip_id == KSZ8795_CHIP_ID || + dev->chip_id == KSZ8794_CHIP_ID || + dev->chip_id == KSZ8765_CHIP_ID) + reg = KSZ8795_REG_SW_CTRL_20; + else + reg = KSZ9477_REG_SW_IO_STRENGTH; + + for (i = 0; i < num_props; i++) { + if (props[i].value == -1) + continue; + + ret = ksz_drive_strength_to_reg(ksz9477_drive_strengths, + array_size, props[i].value); + if (ret < 0) { + ksz_drive_strength_error(dev, ksz9477_drive_strengths, + array_size, props[i].value); + return ret; + } + + mask |= SW_DRIVE_STRENGTH_M << props[i].offset; + val |= ret << props[i].offset; + } + + return ksz_rmw8(dev, reg, mask, val); +} + +/** + * ksz88x3_drive_strength_write() - Set the drive strength configuration for + * KSZ8863 compatible chip variants. + * @dev: ksz device + * @props: Array of drive strength properties to be set + * @num_props: Number of properties in the array + * + * This function applies the specified drive strength settings to KSZ88X3 chip + * variants (KSZ8873, KSZ8863). + * It ensures the configurations align with what the chip variant supports and + * warns or errors out on unsupported settings. + * + * Return: 0 on success, error code otherwise + */ +static int ksz88x3_drive_strength_write(struct ksz_device *dev, + struct ksz_driver_strength_prop *props, + int num_props) +{ + size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths); + int microamp; + int i, ret; + + for (i = 0; i < num_props; i++) { + if (props[i].value == -1 || i == KSZ_DRIVER_STRENGTH_IO) + continue; + + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + props[i].name); + } + + microamp = props[KSZ_DRIVER_STRENGTH_IO].value; + ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size, + microamp); + if (ret < 0) { + ksz_drive_strength_error(dev, ksz88x3_drive_strengths, + array_size, microamp); + return ret; + } + + return ksz_rmw8(dev, KSZ8873_REG_GLOBAL_CTRL_12, + KSZ8873_DRIVE_STRENGTH_16MA, ret); +} + +/** + * ksz_parse_drive_strength() - Extract and apply drive strength configurations + * from device tree properties. + * @dev: ksz device + * + * This function reads the specified drive strength properties from the + * device tree, validates against the supported chip variants, and sets + * them accordingly. An error should be critical here, as the drive strength + * settings are crucial for EMI compliance. + * + * Return: 0 on success, error code otherwise + */ +static int ksz_parse_drive_strength(struct ksz_device *dev) +{ + struct ksz_driver_strength_prop of_props[] = { + [KSZ_DRIVER_STRENGTH_HI] = { + .name = "microchip,hi-drive-strength-microamp", + .offset = SW_HI_SPEED_DRIVE_STRENGTH_S, + .value = -1, + }, + [KSZ_DRIVER_STRENGTH_LO] = { + .name = "microchip,lo-drive-strength-microamp", + .offset = SW_LO_SPEED_DRIVE_STRENGTH_S, + .value = -1, + }, + [KSZ_DRIVER_STRENGTH_IO] = { + .name = "microchip,io-drive-strength-microamp", + .offset = 0, /* don't care */ + .value = -1, + }, + }; + struct device_node *np = dev->dev->of_node; + bool have_any_prop = false; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(of_props); i++) { + ret = of_property_read_u32(np, of_props[i].name, + &of_props[i].value); + if (ret && ret != -EINVAL) + dev_warn(dev->dev, "Failed to read %s\n", + of_props[i].name); + if (ret) + continue; + + have_any_prop = true; + } + + if (!have_any_prop) + return 0; + + switch (dev->chip_id) { + case KSZ88X3_CHIP_ID: + return ksz88x3_drive_strength_write(dev, of_props, + ARRAY_SIZE(of_props)); + case KSZ8795_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8765_CHIP_ID: + case KSZ8563_CHIP_ID: + case KSZ8567_CHIP_ID: + case KSZ9477_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9567_CHIP_ID: + case KSZ9893_CHIP_ID: + case KSZ9896_CHIP_ID: + case KSZ9897_CHIP_ID: + case LAN9646_CHIP_ID: + return ksz9477_drive_strength_write(dev, of_props, + ARRAY_SIZE(of_props)); + default: + for (i = 0; i < ARRAY_SIZE(of_props); i++) { + if (of_props[i].value == -1) + continue; + + dev_warn(dev->dev, "%s is not supported by this chip variant\n", + of_props[i].name); + } + } + + return 0; +} + +static int ksz8463_configure_straps_spi(struct ksz_device *dev) +{ + struct pinctrl *pinctrl; + struct gpio_desc *rxd0; + struct gpio_desc *rxd1; + + rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW); + if (IS_ERR(rxd0)) + return PTR_ERR(rxd0); + + rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH); + if (IS_ERR(rxd1)) + return PTR_ERR(rxd1); + + if (!rxd0 && !rxd1) + return 0; + + if ((rxd0 && !rxd1) || (rxd1 && !rxd0)) + return -EINVAL; + + pinctrl = devm_pinctrl_get_select(dev->dev, "reset"); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + + return 0; +} + +static int ksz8463_release_straps_spi(struct ksz_device *dev) +{ + return pinctrl_select_default_state(dev->dev); +} + int ksz_switch_register(struct ksz_device *dev) { const struct ksz_chip_data *info; - struct device_node *port, *ports; + struct device_node *ports; phy_interface_t interface; unsigned int port_num; int ret; int i; - if (dev->pdata) - dev->chip_id = dev->pdata->chip_id; - dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(dev->reset_gpio)) return PTR_ERR(dev->reset_gpio); if (dev->reset_gpio) { + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_configure_straps_spi(dev); + if (ret) + return ret; + } + gpiod_set_value_cansleep(dev->reset_gpio, 1); usleep_range(10000, 12000); gpiod_set_value_cansleep(dev->reset_gpio, 0); msleep(100); + + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_release_straps_spi(dev); + if (ret) + return ret; + } } mutex_init(&dev->dev_mutex); @@ -3592,6 +5466,9 @@ int ksz_switch_register(struct ksz_device *dev) /* set the real number of ports */ dev->ds->num_ports = dev->info->port_cnt; + /* set the phylink ops */ + dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops; + /* Host port interface will be self detected, or specifically set in * device tree. */ @@ -3605,12 +5482,11 @@ int ksz_switch_register(struct ksz_device *dev) if (!ports) ports = of_get_child_by_name(dev->dev->of_node, "ports"); if (ports) { - for_each_available_child_of_node(ports, port) { + for_each_available_child_of_node_scoped(ports, port) { if (of_property_read_u32(port, "reg", &port_num)) continue; if (!(dev->port_mask & BIT(port_num))) { - of_node_put(port); of_node_put(ports); return -EINVAL; } @@ -3618,6 +5494,9 @@ int ksz_switch_register(struct ksz_device *dev) &dev->ports[port_num].interface); ksz_parse_rgmii_delay(dev, port_num, port); + dev->ports[port_num].fiber = + of_property_read_bool(port, + "micrel,fiber-mode"); } of_node_put(ports); } @@ -3629,6 +5508,11 @@ int ksz_switch_register(struct ksz_device *dev) dev_err(dev->dev, "inconsistent synclko settings\n"); return -EINVAL; } + + dev->wakeup_source = of_property_read_bool(dev->dev->of_node, + "wakeup-source"); + dev->pme_active_high = of_property_read_bool(dev->dev->of_node, + "microchip,pme-active-high"); } ret = dsa_register_switch(dev->ds); @@ -3664,6 +5548,24 @@ void ksz_switch_remove(struct ksz_device *dev) } EXPORT_SYMBOL(ksz_switch_remove); +#ifdef CONFIG_PM_SLEEP +int ksz_switch_suspend(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_suspend(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_suspend); + +int ksz_switch_resume(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_resume(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_resume); +#endif + MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index a4de58847dea..c65188cd3c0a 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip switch driver common header * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ_COMMON_H @@ -10,17 +10,24 @@ #include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/mutex.h> +#include <linux/pcs/pcs-xpcs.h> #include <linux/phy.h> #include <linux/regmap.h> #include <net/dsa.h> #include <linux/irq.h> +#include <linux/platform_data/microchip-ksz.h> #include "ksz_ptp.h" #define KSZ_MAX_NUM_PORTS 8 +/* all KSZ switches count ports from 1 */ +#define KSZ_PORT_1 0 +#define KSZ_PORT_2 1 +#define KSZ_PORT_4 3 struct ksz_device; struct ksz_port; +struct phylink_mac_ops; enum ksz_regmap_width { KSZ_REGMAP_8, @@ -57,9 +64,17 @@ struct ksz_chip_data { int port_cnt; u8 port_nirqs; u8 num_tx_queues; + u8 num_ipms; /* number of Internal Priority Maps */ bool tc_cbs_supported; - bool tc_ets_supported; + + /** + * @phy_side_mdio_supported: Indicates if the chip supports an additional + * side MDIO channel for accessing integrated PHYs. + */ + bool phy_side_mdio_supported; const struct ksz_dev_ops *ops; + const struct phylink_mac_ops *phylink_mac_ops; + bool phy_errata_9477; bool ksz87xx_eee_link_erratum; const struct ksz_mib_names *mib_names; int mib_cnt; @@ -78,6 +93,8 @@ struct ksz_chip_data { bool supports_rgmii[KSZ_MAX_NUM_PORTS]; bool internal_phy[KSZ_MAX_NUM_PORTS]; bool gbit_capable[KSZ_MAX_NUM_PORTS]; + bool ptp_capable; + u8 sgmii_port; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; }; @@ -101,9 +118,15 @@ struct ksz_ptp_irq { int num; }; +struct ksz_switch_macaddr { + unsigned char addr[ETH_ALEN]; + refcount_t refcount; +}; + struct ksz_port { bool remove_tag; /* Remove Tag flag set, for ksz8795 only */ bool learning; + bool isolated; int stp_state; struct phy_device phydev; @@ -111,16 +134,19 @@ struct ksz_port { u32 force:1; u32 read:1; /* read MIB counters in background */ u32 freeze:1; /* MIB counter freeze is enabled */ + u32 sgmii_adv_write:1; struct ksz_port_mib mib; phy_interface_t interface; u32 rgmii_tx_val; u32 rgmii_rx_val; struct ksz_device *ksz_dev; + void *acl_priv; struct ksz_irq pirq; u8 num; + struct phylink_pcs *pcs; #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP) - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; bool hwts_tx_en; bool hwts_rx_en; struct ksz_irq ptpirq; @@ -128,6 +154,7 @@ struct ksz_port { ktime_t tstamp_msg; struct completion tstamp_msg_comp; #endif + bool manual_flow; }; struct ksz_device { @@ -157,6 +184,8 @@ struct ksz_device { phy_interface_t compat_interface; bool synclko_125; bool synclko_disable; + bool wakeup_source; + bool pme_active_high; struct vlan_table *vlan_cache; @@ -169,15 +198,39 @@ struct ksz_device { struct mutex lock_irq; /* IRQ Access */ struct ksz_irq girq; struct ksz_ptp_data ptp_data; + + struct ksz_switch_macaddr *switch_macaddr; + struct net_device *hsr_dev; /* HSR */ + u8 hsr_ports; + + /** + * @phy_addr_map: Array mapping switch ports to their corresponding PHY + * addresses. + */ + u8 phy_addr_map[KSZ_MAX_NUM_PORTS]; + + /** + * @parent_mdio_bus: Pointer to the external MDIO bus controller. + * + * This points to an external MDIO bus controller that is used to access + * the PHYs integrated within the switch. Unlike an integrated MDIO + * bus, this external controller provides a direct path for managing + * the switch’s internal PHYs, bypassing the main SPI interface. + */ + struct mii_bus *parent_mdio_bus; }; /* List of supported models */ enum ksz_model { + KSZ8463, KSZ8563, + KSZ8567, KSZ8795, KSZ8794, KSZ8765, - KSZ8830, + KSZ88X3, + KSZ8864, + KSZ8895, KSZ9477, KSZ9896, KSZ9897, @@ -189,28 +242,11 @@ enum ksz_model { LAN9372, LAN9373, LAN9374, -}; - -enum ksz_chip_id { - KSZ8563_CHIP_ID = 0x8563, - KSZ8795_CHIP_ID = 0x8795, - KSZ8794_CHIP_ID = 0x8794, - KSZ8765_CHIP_ID = 0x8765, - KSZ8830_CHIP_ID = 0x8830, - KSZ9477_CHIP_ID = 0x00947700, - KSZ9896_CHIP_ID = 0x00989600, - KSZ9897_CHIP_ID = 0x00989700, - KSZ9893_CHIP_ID = 0x00989300, - KSZ9563_CHIP_ID = 0x00956300, - KSZ9567_CHIP_ID = 0x00956700, - LAN9370_CHIP_ID = 0x00937000, - LAN9371_CHIP_ID = 0x00937100, - LAN9372_CHIP_ID = 0x00937200, - LAN9373_CHIP_ID = 0x00937300, - LAN9374_CHIP_ID = 0x00937400, + LAN9646, }; enum ksz_regs { + REG_SW_MAC_ADDR, REG_IND_CTRL_0, REG_IND_DATA_8, REG_IND_DATA_CHECK, @@ -231,6 +267,9 @@ enum ksz_regs { S_MULTICAST_CTRL, P_XMII_CTRL_0, P_XMII_CTRL_1, + REG_SW_PME_CTRL, + REG_PORT_PME_STATUS, + REG_PORT_PME_CTRL, }; enum ksz_masks { @@ -255,6 +294,8 @@ enum ksz_masks { DYNAMIC_MAC_TABLE_TIMESTAMP, ALU_STAT_WRITE, ALU_STAT_READ, + ALU_STAT_DIRECT, + ALU_RESV_MCAST_ADDR, P_MII_TX_FLOW_CTRL, P_MII_RX_FLOW_CTRL, }; @@ -316,6 +357,43 @@ struct ksz_dev_ops { void (*port_cleanup)(struct ksz_device *dev, int port); void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port); int (*set_ageing_time)(struct ksz_device *dev, unsigned int msecs); + + /** + * @mdio_bus_preinit: Function pointer to pre-initialize the MDIO bus + * for accessing PHYs. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is used to configure the MDIO bus for PHY + * access before initiating regular PHY operations. It enables either + * SPI/I2C or side MDIO access modes by unlocking necessary registers + * and setting up access permissions for the selected mode. + * + * Return: + * - 0 on success. + * - Negative error code on failure. + */ + int (*mdio_bus_preinit)(struct ksz_device *dev, bool side_mdio); + + /** + * @create_phy_addr_map: Function pointer to create a port-to-PHY + * address map. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side + * MDIO bus. + * + * This function pointer is responsible for mapping switch ports to PHY + * addresses according to the configured access mode (SPI or side MDIO) + * and the device’s strap configuration. The mapping setup may vary + * depending on the chip variant and configuration. Ensures the correct + * address mapping for PHY communication. + * + * Return: + * - 0 on success. + * - Negative error code on failure (e.g., invalid configuration). + */ + int (*create_phy_addr_map)(struct ksz_device *dev, bool side_mdio); int (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); int (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val); void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr, @@ -350,11 +428,13 @@ struct ksz_dev_ops { void (*get_caps)(struct ksz_device *dev, int port, struct phylink_config *config); int (*change_mtu)(struct ksz_device *dev, int port, int mtu); + int (*pme_write8)(struct ksz_device *dev, u32 reg, u8 value); + int (*pme_pread8)(struct ksz_device *dev, int port, int offset, + u8 *data); + int (*pme_pwrite8)(struct ksz_device *dev, int port, int offset, + u8 data); void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze); void (*port_init_cnt)(struct ksz_device *dev, int port); - void (*phylink_mac_config)(struct ksz_device *dev, int port, - unsigned int mode, - const struct phylink_link_state *state); void (*phylink_mac_link_up)(struct ksz_device *dev, int port, unsigned int mode, phy_interface_t interface, @@ -367,19 +447,29 @@ struct ksz_dev_ops { int (*reset)(struct ksz_device *dev); int (*init)(struct ksz_device *dev); void (*exit)(struct ksz_device *dev); + + int (*pcs_create)(struct ksz_device *dev); }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv); int ksz_switch_register(struct ksz_device *dev); void ksz_switch_remove(struct ksz_device *dev); +int ksz_switch_suspend(struct device *dev); +int ksz_switch_resume(struct device *dev); void ksz_init_mib_timer(struct ksz_device *dev); +bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port); void ksz_r_mib_stats64(struct ksz_device *dev, int port); void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port); void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state); bool ksz_get_gbit(struct ksz_device *dev, int port); phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit); extern const struct ksz_chip_data ksz_switch_chips[]; +int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, + struct netlink_ext_ack *extack); +void ksz_switch_macaddr_put(struct dsa_switch *ds); +void ksz_switch_shutdown(struct ksz_device *dev); +int ksz_handle_wake_reason(struct ksz_device *dev, int port); /* Common register access functions */ static inline struct regmap *ksz_regmap_8(struct ksz_device *dev) @@ -397,6 +487,11 @@ static inline struct regmap *ksz_regmap_32(struct ksz_device *dev) return dev->regmap[KSZ_REGMAP_32]; } +static inline bool ksz_is_ksz8463(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8463_CHIP_ID; +} + static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val) { unsigned int value; @@ -610,7 +705,30 @@ static inline bool ksz_is_ksz87xx(struct ksz_device *dev) static inline bool ksz_is_ksz88x3(struct ksz_device *dev) { - return dev->chip_id == KSZ8830_CHIP_ID; + return dev->chip_id == KSZ88X3_CHIP_ID; +} + +static inline bool ksz_is_8895_family(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8895_CHIP_ID || + dev->chip_id == KSZ8864_CHIP_ID; +} + +static inline bool is_ksz8(struct ksz_device *dev) +{ + return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev) || + ksz_is_8895_family(dev) || ksz_is_ksz8463(dev); +} + +static inline bool is_ksz88xx(struct ksz_device *dev) +{ + return ksz_is_ksz88x3(dev) || ksz_is_8895_family(dev) || + ksz_is_ksz8463(dev); +} + +static inline bool is_ksz9477(struct ksz_device *dev) +{ + return dev->chip_id == KSZ9477_CHIP_ID; } static inline int is_lan937x(struct ksz_device *dev) @@ -622,6 +740,27 @@ static inline int is_lan937x(struct ksz_device *dev) dev->chip_id == LAN9374_CHIP_ID; } +static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) +{ + return (dev->chip_id == LAN9371_CHIP_ID || + dev->chip_id == LAN9372_CHIP_ID) && port == KSZ_PORT_4; +} + +static inline int ksz_get_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port - 1; +} + +static inline bool ksz_has_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port > 0; +} + +static inline bool ksz_is_sgmii_port(struct ksz_device *dev, int port) +{ + return dev->info->sgmii_port == port + 1; +} + /* STP State Defines */ #define PORT_TX_ENABLE BIT(2) #define PORT_RX_ENABLE BIT(1) @@ -631,8 +770,10 @@ static inline int is_lan937x(struct ksz_device *dev) #define REG_CHIP_ID0 0x00 #define SW_FAMILY_ID_M GENMASK(15, 8) +#define KSZ84_FAMILY_ID 0x84 #define KSZ87_FAMILY_ID 0x87 #define KSZ88_FAMILY_ID 0x88 +#define KSZ8895_FAMILY_ID 0x95 #define KSZ8_PORT_STATUS_0 0x08 #define KSZ8_PORT_FIBER_MODE BIT(7) @@ -641,6 +782,12 @@ static inline int is_lan937x(struct ksz_device *dev) #define KSZ87_CHIP_ID_94 0x6 #define KSZ87_CHIP_ID_95 0x9 #define KSZ88_CHIP_ID_63 0x3 +#define KSZ8895_CHIP_ID_95 0x4 +#define KSZ8895_CHIP_ID_95R 0x6 + +/* KSZ8895 specific register */ +#define REG_KSZ8864_CHIP_ID 0xFE +#define SW_KSZ8864 BIT(7) #define SW_REV_ID_M GENMASK(7, 4) @@ -673,6 +820,17 @@ static inline int is_lan937x(struct ksz_device *dev) #define P_MII_MAC_MODE BIT(2) #define P_MII_SEL_M 0x3 +/* KSZ9477, KSZ87xx Wake-on-LAN (WoL) masks */ +#define PME_WOL_MAGICPKT BIT(2) +#define PME_WOL_LINKUP BIT(1) +#define PME_WOL_ENERGY BIT(0) + +#define PME_ENABLE BIT(1) +#define PME_POLARITY BIT(0) + +#define KSZ87XX_REG_INT_EN 0x7D +#define KSZ87XX_INT_PME_MASK BIT(4) + /* Interrupt */ #define REG_SW_PORT_INT_STATUS__1 0x001B #define REG_SW_PORT_INT_MASK__1 0x001F @@ -689,13 +847,51 @@ static inline int is_lan937x(struct ksz_device *dev) #define KSZ8_LEGAL_PACKET_SIZE 1518 #define KSZ9477_MAX_FRAME_SIZE 9000 +#define KSZ8873_REG_GLOBAL_CTRL_12 0x0e +/* Drive Strength of I/O Pad + * 0: 8mA, 1: 16mA + */ +#define KSZ8873_DRIVE_STRENGTH_16MA BIT(6) + +#define KSZ8795_REG_SW_CTRL_20 0xa3 +#define KSZ9477_REG_SW_IO_STRENGTH 0x010d +#define SW_DRIVE_STRENGTH_M 0x7 +#define SW_DRIVE_STRENGTH_2MA 0 +#define SW_DRIVE_STRENGTH_4MA 1 +#define SW_DRIVE_STRENGTH_8MA 2 +#define SW_DRIVE_STRENGTH_12MA 3 +#define SW_DRIVE_STRENGTH_16MA 4 +#define SW_DRIVE_STRENGTH_20MA 5 +#define SW_DRIVE_STRENGTH_24MA 6 +#define SW_DRIVE_STRENGTH_28MA 7 +#define SW_HI_SPEED_DRIVE_STRENGTH_S 4 +#define SW_LO_SPEED_DRIVE_STRENGTH_S 0 + +/* TXQ Split Control Register for per-port, per-queue configuration. + * Register 0xAF is TXQ Split for Q3 on Port 1. + * Register offset formula: 0xAF + (port * 4) + (3 - queue) + * where: port = 0..2, queue = 0..3 + */ +#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \ + (0xAF + ((port) * 4) + (3 - (queue))) + +/* Bit 7 selects between: + * 0 = Strict priority mode (highest-priority queue first) + * 1 = Weighted Fair Queuing (WFQ) mode: + * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1 + * If any queues are empty, weight is redistributed. + * + * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873 + * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs. + */ +#define KSZ8873_TXQ_WFQ_ENABLE BIT(7) + #define KSZ9477_REG_PORT_OUT_RATE_0 0x0420 #define KSZ9477_OUT_RATE_NO_LIMIT 0 #define KSZ9477_PORT_MRI_TC_MAP__4 0x0808 #define KSZ9477_PORT_TC_MAP_S 4 -#define KSZ9477_MAX_TC_PRIO 7 /* CBS related registers */ #define REG_PORT_MTI_QUEUE_INDEX__4 0x0900 @@ -753,4 +949,29 @@ static inline int is_lan937x(struct ksz_device *dev) [KSZ_REGMAP_32] = KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \ } +#define KSZ8463_REGMAP_ENTRY(width, regbits, regpad, regalign) \ + { \ + .name = #width, \ + .val_bits = (width), \ + .reg_stride = (width / 8), \ + .reg_bits = (regbits) + (regalign), \ + .pad_bits = (regpad), \ + .read = ksz8463_spi_read, \ + .write = ksz8463_spi_write, \ + .max_register = BIT(regbits) - 1, \ + .cache_type = REGCACHE_NONE, \ + .zero_flag_mask = 1, \ + .use_single_read = 1, \ + .use_single_write = 1, \ + .lock = ksz_regmap_lock, \ + .unlock = ksz_regmap_unlock, \ + } + +#define KSZ8463_REGMAP_TABLE(ksz, regbits, regpad, regalign) \ + static const struct regmap_config ksz##_regmap_config[] = { \ + [KSZ_REGMAP_8] = KSZ8463_REGMAP_ENTRY(8, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_16] = KSZ8463_REGMAP_ENTRY(16, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_32] = KSZ8463_REGMAP_ENTRY(32, (regbits), (regpad), (regalign)), \ + } + #endif diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c new file mode 100644 index 000000000000..7131c5caac54 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -0,0 +1,612 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +#include <linux/dsa/ksz_common.h> +#include <net/dsa.h> +#include <net/dscp.h> +#include <net/ieee8021q.h> + +#include "ksz_common.h" +#include "ksz_dcb.h" +#include "ksz8.h" + +/* Port X Control 0 register. + * The datasheet specifies: Port 1 - 0x10, Port 2 - 0x20, Port 3 - 0x30. + * However, the driver uses get_port_addr(), which maps Port 1 to offset 0. + * Therefore, we define the base offset as 0x00 here to align with that logic. + */ +#define KSZ8_REG_PORT_1_CTRL_0 0x00 +#define KSZ8463_REG_PORT_1_CTRL_0 0x6C +#define KSZ8_PORT_DIFFSERV_ENABLE BIT(6) +#define KSZ8_PORT_802_1P_ENABLE BIT(5) +#define KSZ8_PORT_BASED_PRIO_M GENMASK(4, 3) + +#define KSZ8463_REG_TOS_DSCP_CTRL 0x16 +#define KSZ88X3_REG_TOS_DSCP_CTRL 0x60 +#define KSZ8765_REG_TOS_DSCP_CTRL 0x90 + +#define KSZ9477_REG_SW_MAC_TOS_CTRL 0x033e +#define KSZ9477_SW_TOS_DSCP_REMAP BIT(0) +#define KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M GENMASK(5, 3) + +#define KSZ9477_REG_DIFFSERV_PRIO_MAP 0x0340 + +#define KSZ9477_REG_PORT_MRI_PRIO_CTRL 0x0801 +#define KSZ9477_PORT_HIGHEST_PRIO BIT(7) +#define KSZ9477_PORT_OR_PRIO BIT(6) +#define KSZ9477_PORT_MAC_PRIO_ENABLE BIT(4) +#define KSZ9477_PORT_VLAN_PRIO_ENABLE BIT(3) +#define KSZ9477_PORT_802_1P_PRIO_ENABLE BIT(2) +#define KSZ9477_PORT_DIFFSERV_PRIO_ENABLE BIT(1) +#define KSZ9477_PORT_ACL_PRIO_ENABLE BIT(0) + +#define KSZ9477_REG_PORT_MRI_MAC_CTRL 0x0802 +#define KSZ9477_PORT_BASED_PRIO_M GENMASK(2, 0) + +struct ksz_apptrust_map { + u8 apptrust; + u8 bit; +}; + +static const struct ksz_apptrust_map ksz8_apptrust_map_to_bit[] = { + { DCB_APP_SEL_PCP, KSZ8_PORT_802_1P_ENABLE }, + { IEEE_8021QAZ_APP_SEL_DSCP, KSZ8_PORT_DIFFSERV_ENABLE }, +}; + +static const struct ksz_apptrust_map ksz9477_apptrust_map_to_bit[] = { + { DCB_APP_SEL_PCP, KSZ9477_PORT_802_1P_PRIO_ENABLE }, + { IEEE_8021QAZ_APP_SEL_DSCP, KSZ9477_PORT_DIFFSERV_PRIO_ENABLE }, +}; + +/* ksz_supported_apptrust[] - Supported apptrust selectors and Priority Order + * of Internal Priority Map (IPM) sources. + * + * This array defines the apptrust selectors supported by the hardware, where + * the index within the array indicates the priority of the selector - lower + * indices correspond to higher priority. This fixed priority scheme is due to + * the hardware's design, which does not support configurable priority among + * different priority sources. + * + * The priority sources, including Tail Tag, ACL, VLAN PCP and DSCP are ordered + * by the hardware's fixed logic, as detailed below. The order reflects a + * non-configurable precedence where certain types of priority information + * override others: + * + * 1. Tail Tag - Highest priority, overrides ACL, VLAN PCP, and DSCP priorities. + * 2. ACL - Overrides VLAN PCP and DSCP priorities. + * 3. VLAN PCP - Overrides DSCP priority. + * 4. DSCP - Lowest priority, does not override any other priority source. + * + * In this context, the array's lower index (higher priority) for + * 'DCB_APP_SEL_PCP' suggests its relative priority over + * 'IEEE_8021QAZ_APP_SEL_DSCP' within the system's fixed priority scheme. + * + * DCB_APP_SEL_PCP - Priority Code Point selector + * IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector + */ +static const u8 ksz_supported_apptrust[] = { + DCB_APP_SEL_PCP, + IEEE_8021QAZ_APP_SEL_DSCP, +}; + +static const char * const ksz_supported_apptrust_variants[] = { + "empty", "dscp", "pcp", "dscp pcp" +}; + +static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, + u8 *mask, int *shift) +{ + if (is_ksz8(dev)) { + *reg = KSZ8_REG_PORT_1_CTRL_0; + *mask = KSZ8_PORT_BASED_PRIO_M; + *shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; + } else { + *reg = KSZ9477_REG_PORT_MRI_MAC_CTRL; + *mask = KSZ9477_PORT_BASED_PRIO_M; + *shift = __bf_shf(KSZ9477_PORT_BASED_PRIO_M); + } +} + +/** + * ksz_get_dscp_prio_reg - Retrieves the DSCP-to-priority-mapping register + * @dev: Pointer to the KSZ switch device structure + * @reg: Pointer to the register address to be set + * @per_reg: Pointer to the number of DSCP values per register + * @mask: Pointer to the mask to be set + * + * This function retrieves the DSCP to priority mapping register, the number of + * DSCP values per register, and the mask to be set. + */ +static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg, + int *per_reg, u8 *mask) +{ + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) { + *reg = KSZ8765_REG_TOS_DSCP_CTRL; + *per_reg = 4; + *mask = GENMASK(1, 0); + } else if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { + *reg = KSZ88X3_REG_TOS_DSCP_CTRL; + *per_reg = 4; + *mask = GENMASK(1, 0); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_TOS_DSCP_CTRL; + } else { + *reg = KSZ9477_REG_DIFFSERV_PRIO_MAP; + *per_reg = 2; + *mask = GENMASK(2, 0); + } +} + +/** + * ksz_get_apptrust_map_and_reg - Retrieves the apptrust map and register + * @dev: Pointer to the KSZ switch device structure + * @map: Pointer to the apptrust map to be set + * @reg: Pointer to the register address to be set + * @mask: Pointer to the mask to be set + * + * This function retrieves the apptrust map and register address for the + * apptrust configuration. + */ +static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev, + const struct ksz_apptrust_map **map, + int *reg, u8 *mask) +{ + if (is_ksz8(dev)) { + *map = ksz8_apptrust_map_to_bit; + *reg = KSZ8_REG_PORT_1_CTRL_0; + *mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE; + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; + } else { + *map = ksz9477_apptrust_map_to_bit; + *reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL; + *mask = KSZ9477_PORT_802_1P_PRIO_ENABLE | + KSZ9477_PORT_DIFFSERV_PRIO_ENABLE; + } +} + +/** + * ksz_port_get_default_prio - Retrieves the default priority for a port on a + * KSZ switch + * @ds: Pointer to the DSA switch structure + * @port: Port number from which to get the default priority + * + * This function fetches the default priority for the specified port on a KSZ + * switch. + * + * Return: The default priority of the port on success, or a negative error + * code on failure. + */ +int ksz_port_get_default_prio(struct dsa_switch *ds, int port) +{ + struct ksz_device *dev = ds->priv; + int ret, reg, shift; + u8 data, mask; + + ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); + + ret = ksz_pread8(dev, port, reg, &data); + if (ret) + return ret; + + return (data & mask) >> shift; +} + +/** + * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to set the default priority + * @prio: Priority value to set + * + * This function sets the default priority for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure. + */ +int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio) +{ + struct ksz_device *dev = ds->priv; + int reg, shift; + u8 mask; + + if (prio >= dev->info->num_ipms) + return -EINVAL; + + ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); + + return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask); +} + +/** + * ksz_port_get_dscp_prio - Retrieves the priority for a DSCP value on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to get the priority + * @dscp: DSCP value for which to get the priority + * + * This function fetches the priority value from switch global DSCP-to-priorty + * mapping table for the specified DSCP value. + * + * Return: The priority value for the DSCP on success, or a negative error + * code on failure. + */ +int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp) +{ + struct ksz_device *dev = ds->priv; + int reg, per_reg, ret, shift; + u8 data, mask; + + ksz_get_dscp_prio_reg(dev, ®, &per_reg, &mask); + + /* If DSCP remapping is disabled, DSCP bits 3-5 are used as Internal + * Priority Map (IPM) + */ + if (!is_ksz8(dev)) { + ret = ksz_read8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, &data); + if (ret) + return ret; + + /* If DSCP remapping is disabled, DSCP bits 3-5 are used as + * Internal Priority Map (IPM) + */ + if (!(data & KSZ9477_SW_TOS_DSCP_REMAP)) + return FIELD_GET(KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M, + dscp); + } + + /* In case DSCP remapping is enabled, we need to write the DSCP to + * priority mapping table. + */ + reg += dscp / per_reg; + ret = ksz_read8(dev, reg, &data); + if (ret) + return ret; + + shift = (dscp % per_reg) * (8 / per_reg); + + return (data >> shift) & mask; +} + +/** + * ksz_set_global_dscp_entry - Sets the global DSCP-to-priority mapping entry + * @dev: Pointer to the KSZ switch device structure + * @dscp: DSCP value for which to set the priority + * @ipm: Priority value to set + * + * This function sets the global DSCP-to-priority mapping entry for the + * specified DSCP value. + * + * Return: 0 on success, or a negative error code on failure. + */ +static int ksz_set_global_dscp_entry(struct ksz_device *dev, u8 dscp, u8 ipm) +{ + int reg, per_reg, shift; + u8 mask; + + ksz_get_dscp_prio_reg(dev, ®, &per_reg, &mask); + + shift = (dscp % per_reg) * (8 / per_reg); + + return ksz_rmw8(dev, reg + (dscp / per_reg), mask << shift, + ipm << shift); +} + +/** + * ksz_init_global_dscp_map - Initializes the global DSCP-to-priority mapping + * @dev: Pointer to the KSZ switch device structure + * + * This function initializes the global DSCP-to-priority mapping table for the + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz_init_global_dscp_map(struct ksz_device *dev) +{ + int ret, dscp; + + /* On KSZ9xxx variants, DSCP remapping is disabled by default. + * Enable to have, predictable and reproducible behavior across + * different devices. + */ + if (!is_ksz8(dev)) { + ret = ksz_rmw8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, + KSZ9477_SW_TOS_DSCP_REMAP, + KSZ9477_SW_TOS_DSCP_REMAP); + if (ret) + return ret; + } + + for (dscp = 0; dscp < DSCP_MAX; dscp++) { + int ipm, tt; + + /* Map DSCP to Traffic Type, which is corresponding to the + * Internal Priority Map (IPM) in the switch. + */ + if (!is_ksz8(dev)) { + ipm = ietf_dscp_to_ieee8021q_tt(dscp); + } else { + /* On KSZ8xxx variants we do not have IPM to queue + * remapping table. We need to convert DSCP to Traffic + * Type and then to queue. + */ + tt = ietf_dscp_to_ieee8021q_tt(dscp); + if (tt < 0) + return tt; + + ipm = ieee8021q_tt_to_tc(tt, dev->info->num_tx_queues); + } + + if (ipm < 0) + return ipm; + + ret = ksz_set_global_dscp_entry(dev, dscp, ipm); + } + + return 0; +} + +/** + * ksz_port_add_dscp_prio - Adds a DSCP-to-priority mapping entry for a port on + * a KSZ switch. + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to add the DSCP-to-priority mapping entry + * @dscp: DSCP value for which to add the priority + * @prio: Priority value to set + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio) +{ + struct ksz_device *dev = ds->priv; + + if (prio >= dev->info->num_ipms) + return -ERANGE; + + return ksz_set_global_dscp_entry(dev, dscp, prio); +} + +/** + * ksz_port_del_dscp_prio - Deletes a DSCP-to-priority mapping entry for a port + * on a KSZ switch. + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to delete the DSCP-to-priority mapping entry + * @dscp: DSCP value for which to delete the priority + * @prio: Priority value to delete + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio) +{ + struct ksz_device *dev = ds->priv; + int ipm; + + if (ksz_port_get_dscp_prio(ds, port, dscp) != prio) + return 0; + + if (is_ksz8(dev)) { + ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE, + dev->info->num_tx_queues); + if (ipm < 0) + return ipm; + } else { + ipm = IEEE8021Q_TT_BE; + } + + return ksz_set_global_dscp_entry(dev, dscp, ipm); +} + +/** + * ksz_apptrust_error - Prints an error message for an invalid apptrust selector + * @dev: Pointer to the KSZ switch device structure + * + * This function prints an error message when an invalid apptrust selector is + * provided. + */ +static void ksz_apptrust_error(struct ksz_device *dev) +{ + char supported_apptrust_variants[64]; + int i; + + supported_apptrust_variants[0] = '\0'; + for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust_variants); i++) { + if (i > 0) + strlcat(supported_apptrust_variants, ", ", + sizeof(supported_apptrust_variants)); + strlcat(supported_apptrust_variants, + ksz_supported_apptrust_variants[i], + sizeof(supported_apptrust_variants)); + } + + dev_err(dev->dev, "Invalid apptrust selector or priority order. Supported: %s\n", + supported_apptrust_variants); +} + +/** + * ksz_port_set_apptrust_validate - Validates the apptrust selectors + * @dev: Pointer to the KSZ switch device structure + * @port: Port number for which to set the apptrust selectors + * @sel: Array of apptrust selectors to validate + * @nsel: Number of apptrust selectors in the array + * + * This function validates the apptrust selectors provided and ensures that + * they are in the correct order. + * + * This family of switches supports two apptrust selectors: DCB_APP_SEL_PCP and + * IEEE_8021QAZ_APP_SEL_DSCP. The priority order of the selectors is fixed and + * cannot be changed. The order is as follows: + * 1. DCB_APP_SEL_PCP - Priority Code Point selector (highest priority) + * 2. IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector + * (lowest priority) + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz_port_set_apptrust_validate(struct ksz_device *dev, int port, + const u8 *sel, int nsel) +{ + int i, j, found; + int j_prev = 0; + + /* Iterate through the requested selectors */ + for (i = 0; i < nsel; i++) { + found = 0; + + /* Check if the current selector is supported by the hardware */ + for (j = 0; j < sizeof(ksz_supported_apptrust); j++) { + if (sel[i] != ksz_supported_apptrust[j]) + continue; + + found = 1; + + /* Ensure that no higher priority selector (lower index) + * precedes a lower priority one + */ + if (i > 0 && j <= j_prev) + goto err_sel_not_vaild; + + j_prev = j; + break; + } + + if (!found) + goto err_sel_not_vaild; + } + + return 0; + +err_sel_not_vaild: + ksz_apptrust_error(dev); + + return -EINVAL; +} + +/** + * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to set the apptrust selectors + * @sel: Array of apptrust selectors to set + * @nsel: Number of apptrust selectors in the array + * + * This function sets the apptrust selectors for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_set_apptrust(struct dsa_switch *ds, int port, + const u8 *sel, int nsel) +{ + const struct ksz_apptrust_map *map; + struct ksz_device *dev = ds->priv; + int reg, i, ret; + u8 data = 0; + u8 mask; + + ret = ksz_port_set_apptrust_validate(dev, port, sel, nsel); + if (ret) + return ret; + + ksz_get_apptrust_map_and_reg(dev, &map, ®, &mask); + + for (i = 0; i < nsel; i++) { + int j; + + for (j = 0; j < ARRAY_SIZE(ksz_supported_apptrust); j++) { + if (sel[i] != ksz_supported_apptrust[j]) + continue; + + data |= map[j].bit; + break; + } + } + + return ksz_prmw8(dev, port, reg, mask, data); +} + +/** + * ksz_port_get_apptrust - Retrieves the apptrust selectors for a port on a KSZ + * switch + * @ds: Pointer to the DSA switch structure + * @port: Port number for which to get the apptrust selectors + * @sel: Array to store the apptrust selectors + * @nsel: Number of apptrust selectors in the array + * + * This function fetches the apptrust selectors for the specified port on a KSZ + * switch. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel) +{ + const struct ksz_apptrust_map *map; + struct ksz_device *dev = ds->priv; + int reg, i, ret; + u8 data; + u8 mask; + + ksz_get_apptrust_map_and_reg(dev, &map, ®, &mask); + + ret = ksz_pread8(dev, port, reg, &data); + if (ret) + return ret; + + *nsel = 0; + for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust); i++) { + if (data & map[i].bit) + sel[(*nsel)++] = ksz_supported_apptrust[i]; + } + + return 0; +} + +/** + * ksz_dcb_init_port - Initializes the DCB configuration for a port on a KSZ + * @dev: Pointer to the KSZ switch device structure + * @port: Port number for which to initialize the DCB configuration + * + * This function initializes the DCB configuration for the specified port on a + * KSZ switch. Particular DCB configuration is set for the port, including the + * default priority and apptrust selectors. + * The default priority is set to Best Effort, and the apptrust selectors are + * set to all supported selectors. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_dcb_init_port(struct ksz_device *dev, int port) +{ + const u8 ksz_default_apptrust[] = { DCB_APP_SEL_PCP }; + int ret, ipm; + + if (is_ksz8(dev)) { + ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE, + dev->info->num_tx_queues); + if (ipm < 0) + return ipm; + } else { + ipm = IEEE8021Q_TT_BE; + } + + /* Set the default priority for the port to Best Effort */ + ret = ksz_port_set_default_prio(dev->ds, port, ipm); + if (ret) + return ret; + + return ksz_port_set_apptrust(dev->ds, port, ksz_default_apptrust, + ARRAY_SIZE(ksz_default_apptrust)); +} + +/** + * ksz_dcb_init - Initializes the DCB configuration for a KSZ switch + * @dev: Pointer to the KSZ switch device structure + * + * This function initializes the DCB configuration for a KSZ switch. The global + * DSCP-to-priority mapping table is initialized. + * + * Return: 0 on success, or a negative error code on failure + */ +int ksz_dcb_init(struct ksz_device *dev) +{ + return ksz_init_global_dscp_map(dev); +} diff --git a/drivers/net/dsa/microchip/ksz_dcb.h b/drivers/net/dsa/microchip/ksz_dcb.h new file mode 100644 index 000000000000..e2065223ba90 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz_dcb.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> */ + +#ifndef __KSZ_DCB_H +#define __KSZ_DCB_H + +#include <net/dsa.h> + +#include "ksz_common.h" + +int ksz_port_get_default_prio(struct dsa_switch *ds, int port); +int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio); +int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp); +int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio); +int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio); +int ksz_port_set_apptrust(struct dsa_switch *ds, int port, + const unsigned char *sel, + int nsel); +int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel); +int ksz_dcb_init_port(struct ksz_device *dev, int port); +int ksz_dcb_init(struct ksz_device *dev); + +#endif /* __KSZ_DCB_H */ diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index 4e22a695a64c..997e4a76d0a6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -266,7 +266,6 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) struct ksz_port *prt; struct dsa_port *dp; bool tag_en = false; - int ret; dsa_switch_for_each_user_port(dp, dev->ds) { prt = &dev->ports[dp->index]; @@ -277,9 +276,7 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) } if (tag_en) { - ret = ptp_schedule_worker(ptp_data->clock, 0); - if (ret) - return ret; + ptp_schedule_worker(ptp_data->clock, 0); } else { ptp_cancel_worker_sync(ptp_data->clock); } @@ -293,7 +290,7 @@ static int ksz_ptp_enable_mode(struct ksz_device *dev) /* The function is return back the capability of timestamping feature when * requested through ethtool -T <interface> utility */ -int ksz_get_ts_info(struct dsa_switch *ds, int port, struct ethtool_ts_info *ts) +int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_info *ts) { struct ksz_device *dev = ds->priv; struct ksz_ptp_data *ptp_data; @@ -322,22 +319,21 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port, struct ethtool_ts_info *ts) return 0; } -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config *config; struct ksz_port *prt; prt = &dev->ports[port]; - config = &prt->tstamp_config; + *config = prt->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } static int ksz_set_hwtstamp_config(struct ksz_device *dev, struct ksz_port *prt, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { int ret; @@ -407,26 +403,21 @@ static int ksz_set_hwtstamp_config(struct ksz_device *dev, return ksz_ptp_enable_mode(dev); } -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config config; struct ksz_port *prt; int ret; prt = &dev->ports[port]; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - ret = ksz_set_hwtstamp_config(dev, prt, &config); + ret = ksz_set_hwtstamp_config(dev, prt, config); if (ret) return ret; - memcpy(&prt->tstamp_config, &config, sizeof(config)); - - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + prt->tstamp_config = *config; return 0; } @@ -557,7 +548,7 @@ static void ksz_ptp_txtstamp_skb(struct ksz_device *dev, struct skb_shared_hwtstamps hwtstamps = {}; int ret; - /* timeout must include DSA master to transmit data, tstamp latency, + /* timeout must include DSA conduit to transmit data, tstamp latency, * IRQ latency and time for reading the time stamp. */ ret = wait_for_completion_timeout(&prt->tstamp_msg_comp, @@ -1102,18 +1093,18 @@ static int ksz_ptp_msg_irq_setup(struct ksz_port *port, u8 n) static const char * const name[] = {"pdresp-msg", "xdreq-msg", "sync-msg"}; const struct ksz_dev_ops *ops = port->ksz_dev->dev_ops; + struct ksz_irq *ptpirq = &port->ptpirq; struct ksz_ptp_irq *ptpmsg_irq; ptpmsg_irq = &port->ptpmsg_irq[n]; + ptpmsg_irq->num = irq_create_mapping(ptpirq->domain, n); + if (!ptpmsg_irq->num) + return -EINVAL; ptpmsg_irq->port = port; ptpmsg_irq->ts_reg = ops->get_port_addr(port->num, ts_reg[n]); - snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]); - - ptpmsg_irq->num = irq_find_mapping(port->ptpirq.domain, n); - if (ptpmsg_irq->num < 0) - return ptpmsg_irq->num; + strscpy(ptpmsg_irq->name, name[n]); return request_threaded_irq(ptpmsg_irq->num, NULL, ksz_ptp_msg_thread_fn, IRQF_ONESHOT, @@ -1139,17 +1130,14 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) init_completion(&port->tstamp_msg_comp); - ptpirq->domain = irq_domain_add_linear(dev->dev->of_node, ptpirq->nirqs, - &ksz_ptp_irq_domain_ops, ptpirq); + ptpirq->domain = irq_domain_create_linear(dev_fwnode(dev->dev), ptpirq->nirqs, + &ksz_ptp_irq_domain_ops, ptpirq); if (!ptpirq->domain) return -ENOMEM; - for (irq = 0; irq < ptpirq->nirqs; irq++) - irq_create_mapping(ptpirq->domain, irq); - ptpirq->irq_num = irq_find_mapping(port->pirq.domain, PORT_SRC_PTP_INT); - if (ptpirq->irq_num < 0) { - ret = ptpirq->irq_num; + if (!ptpirq->irq_num) { + ret = -EINVAL; goto out; } @@ -1168,12 +1156,11 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) out_ptp_msg: free_irq(ptpirq->irq_num, ptpirq); - while (irq--) + while (irq--) { free_irq(port->ptpmsg_irq[irq].num, &port->ptpmsg_irq[irq]); -out: - for (irq = 0; irq < ptpirq->nirqs; irq++) irq_dispose_mapping(port->ptpmsg_irq[irq].num); - + } +out: irq_domain_remove(ptpirq->domain); return ret; diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h index 0ca8ca4f804e..3086e519b1b6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.h +++ b/drivers/net/dsa/microchip/ksz_ptp.h @@ -38,9 +38,12 @@ int ksz_ptp_clock_register(struct dsa_switch *ds); void ksz_ptp_clock_unregister(struct dsa_switch *ds); int ksz_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *ts); -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); + struct kernel_ethtool_ts_info *ts); +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); void ksz_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); void ksz_port_deferred_xmit(struct kthread_work *work); bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb, diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 279338451621..d8001734b057 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -2,11 +2,11 @@ /* * Microchip ksz series register access through SPI * - * Copyright (C) 2017 Microchip Technology Inc. + * Copyright (C) 2017-2024 Microchip Technology Inc. * Tristram Ha <Tristram.Ha@microchip.com> */ -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <linux/delay.h> #include <linux/kernel.h> @@ -16,6 +16,10 @@ #include "ksz_common.h" +#define KSZ8463_SPI_ADDR_SHIFT 13 +#define KSZ8463_SPI_ADDR_ALIGN 3 +#define KSZ8463_SPI_TURNAROUND_SHIFT 2 + #define KSZ8795_SPI_ADDR_SHIFT 12 #define KSZ8795_SPI_ADDR_ALIGN 3 #define KSZ8795_SPI_TURNAROUND_SHIFT 1 @@ -37,6 +41,99 @@ KSZ_REGMAP_TABLE(ksz8863, 16, KSZ8863_SPI_ADDR_SHIFT, KSZ_REGMAP_TABLE(ksz9477, 32, KSZ9477_SPI_ADDR_SHIFT, KSZ9477_SPI_TURNAROUND_SHIFT, KSZ9477_SPI_ADDR_ALIGN); +static u16 ksz8463_reg(u16 reg, size_t size) +{ + switch (size) { + case 1: + reg = ((reg >> 2) << 4) | (1 << (reg & 3)); + break; + case 2: + reg = ((reg >> 2) << 4) | (reg & 2 ? 0x0c : 0x03); + break; + default: + reg = ((reg >> 2) << 4) | 0xf; + break; + } + reg <<= KSZ8463_SPI_TURNAROUND_SHIFT; + return reg; +} + +static int ksz8463_spi_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 bytes[2]; + u16 cmd; + int rc; + + if (reg_size > 2 || val_size > 4) + return -EINVAL; + memcpy(&cmd, reg, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); + rc = spi_write_then_read(spi, bytes, reg_size, val, val_size); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (!rc && val_size > 1) { + if (val_size == 2) { + u16 v = get_unaligned_le16(val); + + memcpy(val, &v, sizeof(v)); + } else if (val_size == 4) { + u32 v = get_unaligned_le32(val); + + memcpy(val, &v, sizeof(v)); + } + } +#endif + return rc; +} + +static int ksz8463_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + size_t val_size = count - 2; + u8 bytes[6]; + u16 cmd; + + if (count <= 2 || count > 6) + return -EINVAL; + memcpy(bytes, data, count); + memcpy(&cmd, data, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + cmd |= (1 << (KSZ8463_SPI_ADDR_SHIFT + KSZ8463_SPI_TURNAROUND_SHIFT)); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (val_size == 2) { + u8 *val = &bytes[2]; + u16 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le16(v, val); + } else if (val_size == 4) { + u8 *val = &bytes[2]; + u32 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le32(v, val); + } +#endif + return spi_write(spi, bytes, count); +} + +KSZ8463_REGMAP_TABLE(ksz8463, KSZ8463_SPI_ADDR_SHIFT, 0, + KSZ8463_SPI_ADDR_ALIGN); + static int ksz_spi_probe(struct spi_device *spi) { const struct regmap_config *regmap_config; @@ -54,12 +151,19 @@ static int ksz_spi_probe(struct spi_device *spi) if (!chip) return -EINVAL; - if (chip->chip_id == KSZ8830_CHIP_ID) + /* Save chip id to do special initialization when probing. */ + dev->chip_id = chip->chip_id; + if (chip->chip_id == KSZ88X3_CHIP_ID) regmap_config = ksz8863_regmap_config; + else if (chip->chip_id == KSZ8463_CHIP_ID) + regmap_config = ksz8463_regmap_config; else if (chip->chip_id == KSZ8795_CHIP_ID || chip->chip_id == KSZ8794_CHIP_ID || chip->chip_id == KSZ8765_CHIP_ID) regmap_config = ksz8795_regmap_config; + else if (chip->chip_id == KSZ8895_CHIP_ID || + chip->chip_id == KSZ8864_CHIP_ID) + regmap_config = ksz8863_regmap_config; else regmap_config = ksz9477_regmap_config; @@ -114,16 +218,17 @@ static void ksz_spi_shutdown(struct spi_device *spi) if (!dev) return; - if (dev->dev_ops->reset) - dev->dev_ops->reset(dev); - - dsa_switch_shutdown(dev->ds); + ksz_switch_shutdown(dev); spi_set_drvdata(spi, NULL); } static const struct of_device_id ksz_dt_ids[] = { { + .compatible = "microchip,ksz8463", + .data = &ksz_switch_chips[KSZ8463] + }, + { .compatible = "microchip,ksz8765", .data = &ksz_switch_chips[KSZ8765] }, @@ -137,11 +242,19 @@ static const struct of_device_id ksz_dt_ids[] = { }, { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] + }, + { + .compatible = "microchip,ksz8864", + .data = &ksz_switch_chips[KSZ8864] }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] + }, + { + .compatible = "microchip,ksz8895", + .data = &ksz_switch_chips[KSZ8895] }, { .compatible = "microchip,ksz9477", @@ -168,6 +281,10 @@ static const struct of_device_id ksz_dt_ids[] = { .data = &ksz_switch_chips[KSZ8563] }, { + .compatible = "microchip,ksz8567", + .data = &ksz_switch_chips[KSZ8567] + }, + { .compatible = "microchip,ksz9567", .data = &ksz_switch_chips[KSZ9567] }, @@ -191,37 +308,49 @@ static const struct of_device_id ksz_dt_ids[] = { .compatible = "microchip,lan9374", .data = &ksz_switch_chips[LAN9374] }, + { + .compatible = "microchip,lan9646", + .data = &ksz_switch_chips[LAN9646] + }, {}, }; MODULE_DEVICE_TABLE(of, ksz_dt_ids); static const struct spi_device_id ksz_spi_ids[] = { + { "ksz8463" }, { "ksz8765" }, { "ksz8794" }, { "ksz8795" }, { "ksz8863" }, + { "ksz8864" }, { "ksz8873" }, + { "ksz8895" }, { "ksz9477" }, { "ksz9896" }, { "ksz9897" }, { "ksz9893" }, { "ksz9563" }, { "ksz8563" }, + { "ksz8567" }, { "ksz9567" }, { "lan9370" }, { "lan9371" }, { "lan9372" }, { "lan9373" }, { "lan9374" }, + { "lan9646" }, { }, }; MODULE_DEVICE_TABLE(spi, ksz_spi_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_spi_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct spi_driver ksz_spi_driver = { .driver = { .name = "ksz-switch", - .owner = THIS_MODULE, .of_match_table = ksz_dt_ids, + .pm = &ksz_spi_pm_ops, }, .id_table = ksz_spi_ids, .probe = ksz_spi_probe, @@ -231,13 +360,6 @@ static struct spi_driver ksz_spi_driver = { module_spi_driver(ksz_spi_driver); -MODULE_ALIAS("spi:ksz9477"); -MODULE_ALIAS("spi:ksz9896"); -MODULE_ALIAS("spi:ksz9897"); -MODULE_ALIAS("spi:ksz9893"); -MODULE_ALIAS("spi:ksz9563"); -MODULE_ALIAS("spi:ksz8563"); -MODULE_ALIAS("spi:ksz9567"); MODULE_ALIAS("spi:lan937x"); MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>"); MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver"); diff --git a/drivers/net/dsa/microchip/lan937x.h b/drivers/net/dsa/microchip/lan937x.h index 3388d91dbc44..df13ebbd356f 100644 --- a/drivers/net/dsa/microchip/lan937x.h +++ b/drivers/net/dsa/microchip/lan937x.h @@ -13,6 +13,8 @@ void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port); void lan937x_config_cpu_port(struct dsa_switch *ds); int lan937x_switch_init(struct ksz_device *dev); void lan937x_switch_exit(struct ksz_device *dev); +int lan937x_mdio_bus_preinit(struct ksz_device *dev, bool side_mdio); +int lan937x_create_phy_addr_map(struct ksz_device *dev, bool side_mdio); int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data); int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val); int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu); diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c index b479a628b1ae..5a1496fff445 100644 --- a/drivers/net/dsa/microchip/lan937x_main.c +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Microchip LAN937X switch driver main logic - * Copyright (C) 2019-2022 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #include <linux/kernel.h> #include <linux/module.h> @@ -18,6 +18,87 @@ #include "ksz9477.h" #include "lan937x.h" +/* marker for ports without built-in PHY */ +#define LAN937X_NO_PHY U8_MAX + +/* + * lan9370_phy_addr - Mapping of LAN9370 switch ports to PHY addresses. + * + * Each entry corresponds to a specific port on the LAN9370 switch, + * where ports 1-4 are connected to integrated 100BASE-T1 PHYs, and + * Port 5 is connected to an RGMII interface without a PHY. The values + * are based on the documentation (DS00003108E, section 3.3). + */ +static const u8 lan9370_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 6, /* Port 4, T1 AFE4 */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ +}; + +/* + * lan9371_phy_addr - Mapping of LAN9371 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003109E, section 3.3). + */ +static const u8 lan9371_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 8, /* Port 4, TX PHY */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ +}; + +/* + * lan9372_phy_addr - Mapping of LAN9372 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9372_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 8, /* Port 4, TX PHY */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + +/* + * lan9373_phy_addr - Mapping of LAN9373 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9373_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = LAN937X_NO_PHY, /* Port 4, SGMII */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + +/* + * lan9374_phy_addr - Mapping of LAN9374 switch ports to PHY addresses. + * + * The values are based on the documentation (DS00003110F, section 3.3). + */ +static const u8 lan9374_phy_addr[] = { + [0] = 2, /* Port 1, T1 AFE0 */ + [1] = 3, /* Port 2, T1 AFE1 */ + [2] = 5, /* Port 3, T1 AFE3 */ + [3] = 7, /* Port 4, T1 AFE5 */ + [4] = LAN937X_NO_PHY, /* Port 5, RGMII 2 */ + [5] = LAN937X_NO_PHY, /* Port 6, RGMII 1 */ + [6] = 6, /* Port 7, T1 AFE4 */ + [7] = 4, /* Port 8, T1 AFE2 */ +}; + static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); @@ -30,24 +111,144 @@ static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, bits, set ? bits : 0); } -static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +/** + * lan937x_create_phy_addr_map - Create port-to-PHY address map for MDIO bus. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side MDIO bus. + * + * This function sets up the PHY address mapping for the LAN937x switches, + * which support two access modes for internal PHYs: + * 1. **SPI Access**: A straightforward one-to-one port-to-PHY address + * mapping is applied. + * 2. **MDIO Access**: The PHY address mapping varies based on chip variant + * and strap configuration. An offset is calculated based on strap settings + * to ensure correct PHY addresses are assigned. The offset calculation logic + * is based on Microchip's Article Number 000015828, available at: + * https://microchip.my.site.com/s/article/LAN9374-Virtual-PHY-PHY-Address-Mapping + * + * The function first checks if side MDIO access is disabled, in which case a + * simple direct mapping (port number = PHY address) is applied. If side MDIO + * access is enabled, it reads the strap configuration to determine the correct + * offset for PHY addresses. + * + * The appropriate mapping table is selected based on the chip ID, and the + * `phy_addr_map` is populated with the correct addresses for each port. Any + * port with no PHY is assigned a `LAN937X_NO_PHY` marker. + * + * Return: 0 on success, error code on failure. + */ +int lan937x_create_phy_addr_map(struct ksz_device *dev, bool side_mdio) +{ + static const u8 *phy_addr_map; + u32 strap_val; + u8 offset = 0; + size_t size; + int ret, i; + + if (!side_mdio) { + /* simple direct mapping */ + for (i = 0; i < dev->info->port_cnt; i++) + dev->phy_addr_map[i] = i; + + return 0; + } + + ret = ksz_read32(dev, REG_SW_CFG_STRAP_VAL, &strap_val); + if (ret < 0) + return ret; + + if (!(strap_val & SW_CASCADE_ID_CFG) && !(strap_val & SW_VPHY_ADD_CFG)) + offset = 0; + else if (!(strap_val & SW_CASCADE_ID_CFG) && (strap_val & SW_VPHY_ADD_CFG)) + offset = 7; + else if ((strap_val & SW_CASCADE_ID_CFG) && !(strap_val & SW_VPHY_ADD_CFG)) + offset = 15; + else + offset = 22; + + switch (dev->info->chip_id) { + case LAN9370_CHIP_ID: + phy_addr_map = lan9370_phy_addr; + size = ARRAY_SIZE(lan9370_phy_addr); + break; + case LAN9371_CHIP_ID: + phy_addr_map = lan9371_phy_addr; + size = ARRAY_SIZE(lan9371_phy_addr); + break; + case LAN9372_CHIP_ID: + phy_addr_map = lan9372_phy_addr; + size = ARRAY_SIZE(lan9372_phy_addr); + break; + case LAN9373_CHIP_ID: + phy_addr_map = lan9373_phy_addr; + size = ARRAY_SIZE(lan9373_phy_addr); + break; + case LAN9374_CHIP_ID: + phy_addr_map = lan9374_phy_addr; + size = ARRAY_SIZE(lan9374_phy_addr); + break; + default: + return -EINVAL; + } + + if (size < dev->info->port_cnt) + return -EINVAL; + + for (i = 0; i < dev->info->port_cnt; i++) { + if (phy_addr_map[i] == LAN937X_NO_PHY) + dev->phy_addr_map[i] = phy_addr_map[i]; + else + dev->phy_addr_map[i] = phy_addr_map[i] + offset; + } + + return 0; +} + +/** + * lan937x_mdio_bus_preinit - Pre-initialize MDIO bus for accessing PHYs. + * @dev: Pointer to device structure. + * @side_mdio: Boolean indicating if the PHYs are accessed over a side MDIO bus. + * + * This function configures the LAN937x switch for PHY access either through + * SPI or the side MDIO bus, unlocking the necessary registers for each access + * mode. + * + * Operation Modes: + * 1. **SPI Access**: Enables SPI indirect access to address clock domain + * crossing issues when SPI is used for PHY access. + * 2. **MDIO Access**: Grants access to internal PHYs over the side MDIO bus, + * required when using the MDIO bus for PHY management. + * + * Return: 0 on success, error code on failure. + */ +int lan937x_mdio_bus_preinit(struct ksz_device *dev, bool side_mdio) { u16 data16; int ret; - /* Enable Phy access through SPI */ + /* Unlock access to the PHYs, needed for SPI and side MDIO access */ ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); if (ret < 0) - return ret; + goto print_error; - ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); - if (ret < 0) - return ret; + if (side_mdio) + /* Allow access to internal PHYs over MDIO bus */ + data16 = VPHY_MDIO_INTERNAL_ENABLE; + else + /* Enable SPI indirect access to address clock domain crossing + * issue + */ + data16 = VPHY_SPI_INDIRECT_ENABLE; - /* Allow SPI access */ - data16 |= VPHY_SPI_INDIRECT_ENABLE; + ret = ksz_rmw16(dev, REG_VPHY_SPECIAL_CTRL__2, + VPHY_SPI_INDIRECT_ENABLE | VPHY_MDIO_INTERNAL_ENABLE, + data16); - return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); +print_error: + if (ret < 0) + dev_err(dev->dev, "failed to preinit the MDIO bus\n"); + + return ret; } static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) @@ -55,6 +256,9 @@ static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE; u16 temp; + if (is_lan937x_tx_phy(dev, addr)) + addr_base = REG_PORT_TX_PHY_CTRL_BASE; + /* get register address based on the logical port */ temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); @@ -257,10 +461,66 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { - u32 secs = msecs / 1000; - u32 value; + u8 data, mult, value8; + bool in_msec = false; + u32 max_val, value; + u32 secs = msecs; int ret; +#define MAX_TIMER_VAL ((1 << 20) - 1) + + /* The aging timer comprises a 3-bit multiplier and a 20-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 1048575 = 7340025 seconds. As this value is too large for + * practical use it can be interpreted as microseconds, making the + * maximum timer 7340 seconds with finer control. This allows for + * maximum 122 minutes compared to 29 minutes in KSZ9477 switch. + */ + if (msecs % 1000) + in_msec = true; + else + secs /= 1000; + if (!secs) + secs = 1; + + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; + + /* Configure how to interpret the number value. */ + ret = ksz_rmw8(dev, REG_SW_LUE_CTRL_2, SW_AGE_CNT_IN_MICROSEC, + in_msec ? SW_AGE_CNT_IN_MICROSEC : 0); + if (ret < 0) + return ret; + + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value8); + if (ret < 0) + return ret; + + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value8); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } + + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value8 &= ~SW_AGE_CNT_M; + value8 |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value8); + if (ret < 0) + return ret; + } + + secs = DIV_ROUND_UP(secs, data); + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); @@ -280,6 +540,7 @@ static void lan937x_set_tune_adj(struct ksz_device *dev, int port, ksz_pread16(dev, port, reg, &data16); /* Update tune Adjust */ + data16 &= ~PORT_TUNE_ADJ; data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); ksz_pwrite16(dev, port, reg, data16); @@ -320,6 +581,9 @@ void lan937x_phylink_get_caps(struct ksz_device *dev, int port, /* MII/RMII/RGMII ports */ config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_100HD | MAC_10 | MAC_1000FD; + } else if (is_lan937x_tx_phy(dev, port)) { + config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_100HD | MAC_10; } } @@ -357,36 +621,39 @@ int lan937x_setup(struct dsa_switch *ds) struct ksz_device *dev = ds->priv; int ret; - /* enable Indirect Access from SPI to the VPHY registers */ - ret = lan937x_enable_spi_indirect_access(dev); - if (ret < 0) { - dev_err(dev->dev, "failed to enable spi indirect access"); - return ret; - } - /* The VLAN aware is a global setting. Mixed vlan * filterings are not supported. */ ds->vlan_filtering_is_global = true; /* Enable aggressive back off for half duplex & UNH mode */ - lan937x_cfg(dev, REG_SW_MAC_CTRL_0, - (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF), - true); + ret = lan937x_cfg(dev, REG_SW_MAC_CTRL_0, (SW_PAUSE_UNH_MODE | + SW_NEW_BACKOFF | + SW_AGGR_BACKOFF), true); + if (ret < 0) + return ret; /* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop * packets when 16 or more collisions occur */ - lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); + ret = lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); + if (ret < 0) + return ret; /* enable global MIB counter freeze function */ - lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + ret = lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + if (ret < 0) + return ret; /* disable CLK125 & CLK25, 1: disable, 0: enable */ - lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, - (SW_CLK125_ENB | SW_CLK25_ENB), true); + ret = lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, + (SW_CLK125_ENB | SW_CLK25_ENB), true); + if (ret < 0) + return ret; - return 0; + /* Disable global VPHY support. Related to CPU interface only? */ + return ksz_rmw32(dev, REG_SW_CFG_STRAP_OVR, SW_VPHY_DISABLE, + SW_VPHY_DISABLE); } void lan937x_teardown(struct dsa_switch *ds) diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h index 45b606b6429f..72042fd64e5b 100644 --- a/drivers/net/dsa/microchip/lan937x_reg.h +++ b/drivers/net/dsa/microchip/lan937x_reg.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip LAN937X switch register definitions - * Copyright (C) 2019-2021 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #ifndef __LAN937X_REG_H #define __LAN937X_REG_H @@ -37,6 +37,14 @@ #define SW_CLK125_ENB BIT(1) #define SW_CLK25_ENB BIT(0) +#define REG_SW_CFG_STRAP_VAL 0x0200 +#define SW_CASCADE_ID_CFG BIT(15) +#define SW_VPHY_ADD_CFG BIT(0) + +/* 2 - PHY Control */ +#define REG_SW_CFG_STRAP_OVR 0x0214 +#define SW_VPHY_DISABLE BIT(31) + /* 3 - Operation Control */ #define REG_SW_OPERATION 0x0300 @@ -48,8 +56,7 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) -#define SW_AGE_CNT_M 0x7 -#define SW_AGE_CNT_S 3 +#define SW_AGE_CNT_M GENMASK(5, 3) #define SW_RESV_MCAST_ENABLE BIT(2) #define REG_SW_LUE_CTRL_1 0x0311 @@ -62,6 +69,10 @@ #define SW_FAST_AGING BIT(1) #define SW_LINK_AUTO_AGING BIT(0) +#define REG_SW_LUE_CTRL_2 0x0312 + +#define SW_AGE_CNT_IN_MICROSEC BIT(7) + #define REG_SW_AGE_PERIOD__1 0x0313 #define SW_AGE_PERIOD_7_0_M GENMASK(7, 0) @@ -147,6 +158,7 @@ /* 1 - Phy */ #define REG_PORT_T1_PHY_CTRL_BASE 0x0100 +#define REG_PORT_TX_PHY_CTRL_BASE 0x0280 /* 3 - xMII */ #define PORT_SGMII_SEL BIT(7) diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c index 088533663b83..0286a6cecb6f 100644 --- a/drivers/net/dsa/mt7530-mdio.c +++ b/drivers/net/dsa/mt7530-mdio.c @@ -18,7 +18,8 @@ static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) { - struct mii_bus *bus = context; + struct mt7530_priv *priv = context; + struct mii_bus *bus = priv->bus; u16 page, r, lo, hi; int ret; @@ -27,36 +28,35 @@ mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) lo = val & 0xffff; hi = val >> 16; - /* MT7530 uses 31 as the pseudo port */ - ret = bus->write(bus, 0x1f, 0x1f, page); + ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page); if (ret < 0) return ret; - ret = bus->write(bus, 0x1f, r, lo); + ret = bus->write(bus, priv->mdiodev->addr, r, lo); if (ret < 0) return ret; - ret = bus->write(bus, 0x1f, 0x10, hi); + ret = bus->write(bus, priv->mdiodev->addr, 0x10, hi); return ret; } static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) { - struct mii_bus *bus = context; + struct mt7530_priv *priv = context; + struct mii_bus *bus = priv->bus; u16 page, r, lo, hi; int ret; page = (reg >> 6) & 0x3ff; r = (reg >> 2) & 0xf; - /* MT7530 uses 31 as the pseudo port */ - ret = bus->write(bus, 0x1f, 0x1f, page); + ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page); if (ret < 0) return ret; - lo = bus->read(bus, 0x1f, r); - hi = bus->read(bus, 0x1f, 0x10); + lo = bus->read(bus, priv->mdiodev->addr, r); + hi = bus->read(bus, priv->mdiodev->addr, 0x10); *val = (hi << 16) | (lo & 0xffff); @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = { }; static int -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) +mt7531_create_sgmii(struct mt7530_priv *priv) { struct regmap_config *mt7531_pcs_config[2] = {}; struct phylink_pcs *pcs; struct regmap *regmap; int i, ret = 0; - /* MT7531AE has two SGMII units for port 5 and port 6 - * MT7531BE has only one SGMII unit for port 6 - */ - for (i = dual_sgmii ? 0 : 1; i < 2; i++) { + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) { mt7531_pcs_config[i] = devm_kzalloc(priv->dev, sizeof(struct regmap_config), GFP_KERNEL); @@ -110,8 +107,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii) mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock; mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; - regmap = devm_regmap_init(priv->dev, - &mt7530_regmap_bus, priv->bus, + regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv, mt7531_pcs_config[i]); if (IS_ERR(regmap)) { ret = PTR_ERR(regmap); @@ -140,10 +136,17 @@ static const struct of_device_id mt7530_of_match[] = { }; MODULE_DEVICE_TABLE(of, mt7530_of_match); +static const struct regmap_config regmap_config = { + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = MT7530_CREV, + .disable_locking = true, +}; + static int mt7530_probe(struct mdio_device *mdiodev) { - static struct regmap_config *regmap_config; struct mt7530_priv *priv; struct device_node *dn; int ret; @@ -156,6 +159,7 @@ mt7530_probe(struct mdio_device *mdiodev) priv->bus = mdiodev->bus; priv->dev = &mdiodev->dev; + priv->mdiodev = mdiodev; ret = mt7530_probe_common(priv); if (ret) @@ -196,18 +200,8 @@ mt7530_probe(struct mdio_device *mdiodev) return PTR_ERR(priv->io_pwr); } - regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), - GFP_KERNEL); - if (!regmap_config) - return -ENOMEM; - - regmap_config->reg_bits = 16; - regmap_config->val_bits = 32; - regmap_config->reg_stride = 4; - regmap_config->max_register = MT7530_CREV; - regmap_config->disable_locking = true; - priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, - priv->bus, regmap_config); + priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv, + ®map_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c index 0a6a2fe34e64..1dc8b93fb51a 100644 --- a/drivers/net/dsa/mt7530-mmio.c +++ b/drivers/net/dsa/mt7530-mmio.c @@ -11,15 +11,24 @@ #include "mt7530.h" static const struct of_device_id mt7988_of_match[] = { + { .compatible = "airoha,an7583-switch", .data = &mt753x_table[ID_AN7583], }, + { .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], }, { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7988_of_match); +static const struct regmap_config sw_regmap_config = { + .name = "switch", + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = MT7530_CREV, +}; + static int mt7988_probe(struct platform_device *pdev) { - static struct regmap_config *sw_regmap_config; struct mt7530_priv *priv; void __iomem *base_addr; int ret; @@ -47,31 +56,20 @@ mt7988_probe(struct platform_device *pdev) return -ENXIO; } - sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL); - if (!sw_regmap_config) - return -ENOMEM; - - sw_regmap_config->name = "switch"; - sw_regmap_config->reg_bits = 16; - sw_regmap_config->val_bits = 32; - sw_regmap_config->reg_stride = 4; - sw_regmap_config->max_register = MT7530_CREV; - priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config); + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, + &sw_regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); return dsa_register_switch(priv->ds); } -static int -mt7988_remove(struct platform_device *pdev) +static void mt7988_remove(struct platform_device *pdev) { struct mt7530_priv *priv = platform_get_drvdata(pdev); if (priv) mt7530_remove_common(priv); - - return 0; } static void mt7988_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 035a34b50f31..b9423389c2ef 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -21,6 +21,7 @@ #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <net/dsa.h> +#include <net/pkt_cls.h> #include "mt7530.h" @@ -31,151 +32,105 @@ static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs) /* String, offset, and register size in bytes if different from 4 bytes */ static const struct mt7530_mib_desc mt7530_mib[] = { - MIB_DESC(1, 0x00, "TxDrop"), - MIB_DESC(1, 0x04, "TxCrcErr"), - MIB_DESC(1, 0x08, "TxUnicast"), - MIB_DESC(1, 0x0c, "TxMulticast"), - MIB_DESC(1, 0x10, "TxBroadcast"), - MIB_DESC(1, 0x14, "TxCollision"), - MIB_DESC(1, 0x18, "TxSingleCollision"), - MIB_DESC(1, 0x1c, "TxMultipleCollision"), - MIB_DESC(1, 0x20, "TxDeferred"), - MIB_DESC(1, 0x24, "TxLateCollision"), - MIB_DESC(1, 0x28, "TxExcessiveCollistion"), - MIB_DESC(1, 0x2c, "TxPause"), - MIB_DESC(1, 0x30, "TxPktSz64"), - MIB_DESC(1, 0x34, "TxPktSz65To127"), - MIB_DESC(1, 0x38, "TxPktSz128To255"), - MIB_DESC(1, 0x3c, "TxPktSz256To511"), - MIB_DESC(1, 0x40, "TxPktSz512To1023"), - MIB_DESC(1, 0x44, "Tx1024ToMax"), - MIB_DESC(2, 0x48, "TxBytes"), - MIB_DESC(1, 0x60, "RxDrop"), - MIB_DESC(1, 0x64, "RxFiltering"), - MIB_DESC(1, 0x68, "RxUnicast"), - MIB_DESC(1, 0x6c, "RxMulticast"), - MIB_DESC(1, 0x70, "RxBroadcast"), - MIB_DESC(1, 0x74, "RxAlignErr"), - MIB_DESC(1, 0x78, "RxCrcErr"), - MIB_DESC(1, 0x7c, "RxUnderSizeErr"), - MIB_DESC(1, 0x80, "RxFragErr"), - MIB_DESC(1, 0x84, "RxOverSzErr"), - MIB_DESC(1, 0x88, "RxJabberErr"), - MIB_DESC(1, 0x8c, "RxPause"), - MIB_DESC(1, 0x90, "RxPktSz64"), - MIB_DESC(1, 0x94, "RxPktSz65To127"), - MIB_DESC(1, 0x98, "RxPktSz128To255"), - MIB_DESC(1, 0x9c, "RxPktSz256To511"), - MIB_DESC(1, 0xa0, "RxPktSz512To1023"), - MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), - MIB_DESC(2, 0xa8, "RxBytes"), - MIB_DESC(1, 0xb0, "RxCtrlDrop"), - MIB_DESC(1, 0xb4, "RxIngressDrop"), - MIB_DESC(1, 0xb8, "RxArlDrop"), + MIB_DESC(1, MT7530_PORT_MIB_TX_DROP, "TxDrop"), + MIB_DESC(1, MT7530_PORT_MIB_TX_CRC_ERR, "TxCrcErr"), + MIB_DESC(1, MT7530_PORT_MIB_TX_COLLISION, "TxCollision"), + MIB_DESC(1, MT7530_PORT_MIB_RX_DROP, "RxDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_FILTERING, "RxFiltering"), + MIB_DESC(1, MT7530_PORT_MIB_RX_CRC_ERR, "RxCrcErr"), + MIB_DESC(1, MT7530_PORT_MIB_RX_CTRL_DROP, "RxCtrlDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_INGRESS_DROP, "RxIngressDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_ARL_DROP, "RxArlDrop"), }; -/* Since phy_device has not yet been created and - * phy_{read,write}_mmd_indirect is not available, we provide our own - * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers - * to complete this function. - */ -static int -core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) +static void +mt7530_mutex_lock(struct mt7530_priv *priv) +{ + if (priv->bus) + mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); +} + +static void +mt7530_mutex_unlock(struct mt7530_priv *priv) +{ + if (priv->bus) + mutex_unlock(&priv->bus->mdio_lock); +} + +static void +core_write(struct mt7530_priv *priv, u32 reg, u32 val) { struct mii_bus *bus = priv->bus; - int value, ret; + int ret; + + mt7530_mutex_lock(priv); /* Write the desired MMD Devad */ - ret = bus->write(bus, 0, MII_MMD_CTRL, devad); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_CTRL, MDIO_MMD_VEND2); if (ret < 0) goto err; /* Write the desired MMD register address */ - ret = bus->write(bus, 0, MII_MMD_DATA, prtad); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_DATA, reg); if (ret < 0) goto err; /* Select the Function : DATA with no post increment */ - ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR); if (ret < 0) goto err; - /* Read the content of the MMD's selected register */ - value = bus->read(bus, 0, MII_MMD_DATA); - - return value; + /* Write the data into MMD's selected register */ + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_DATA, val); err: - dev_err(&bus->dev, "failed to read mmd register\n"); + if (ret < 0) + dev_err(&bus->dev, "failed to write mmd register\n"); - return ret; + mt7530_mutex_unlock(priv); } -static int -core_write_mmd_indirect(struct mt7530_priv *priv, int prtad, - int devad, u32 data) +static void +core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) { struct mii_bus *bus = priv->bus; + u32 val; int ret; + mt7530_mutex_lock(priv); + /* Write the desired MMD Devad */ - ret = bus->write(bus, 0, MII_MMD_CTRL, devad); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_CTRL, MDIO_MMD_VEND2); if (ret < 0) goto err; /* Write the desired MMD register address */ - ret = bus->write(bus, 0, MII_MMD_DATA, prtad); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_DATA, reg); if (ret < 0) goto err; /* Select the Function : DATA with no post increment */ - ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR)); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR); if (ret < 0) goto err; + /* Read the content of the MMD's selected register */ + val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_DATA); + val &= ~mask; + val |= set; /* Write the data into MMD's selected register */ - ret = bus->write(bus, 0, MII_MMD_DATA, data); + ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MII_MMD_DATA, val); err: if (ret < 0) - dev_err(&bus->dev, - "failed to write mmd register\n"); - return ret; -} - -static void -mt7530_mutex_lock(struct mt7530_priv *priv) -{ - if (priv->bus) - mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); -} - -static void -mt7530_mutex_unlock(struct mt7530_priv *priv) -{ - if (priv->bus) - mutex_unlock(&priv->bus->mdio_lock); -} - -static void -core_write(struct mt7530_priv *priv, u32 reg, u32 val) -{ - mt7530_mutex_lock(priv); - - core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); - - mt7530_mutex_unlock(priv); -} - -static void -core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set) -{ - u32 val; - - mt7530_mutex_lock(priv); - - val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2); - val &= ~mask; - val |= set; - core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val); + dev_err(&bus->dev, "failed to write mmd register\n"); mt7530_mutex_unlock(priv); } @@ -414,113 +369,76 @@ mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds) } /* Setup port 6 interface mode and TRGMII TX circuit */ -static int -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) +static void +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, xtal; + u32 ncpo1, ssc_delta, xtal; - xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; + /* Disable the MT7530 TRGMII clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - if (xtal == HWTRAP_XTAL_20MHZ) { - dev_err(priv->dev, - "%s: MT7530 with a 20MHz XTAL is not supported!\n", - __func__); - return -EINVAL; - } - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - trgint = 0; - break; - case PHY_INTERFACE_MODE_TRGMII: - trgint = 1; - if (xtal == HWTRAP_XTAL_25MHZ) - ssc_delta = 0x57; - else - ssc_delta = 0x87; - if (priv->id == ID_MT7621) { - /* PLL frequency: 125MHz: 1.0GBit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0640; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x0a00; - } else { /* PLL frequency: 250MHz: 2.0Gbit */ - if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0c80; - if (xtal == HWTRAP_XTAL_25MHZ) - ncpo1 = 0x1400; - } - break; - default: - dev_err(priv->dev, "xMII interface %d not supported\n", - interface); - return -EINVAL; - } - - mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, - P6_INTF_MODE(trgint)); - - if (trgint) { - /* Disable the MT7530 TRGMII clocks */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); - - /* Setup the MT7530 TRGMII Tx Clock */ - core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); - core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); - core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); - core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); - core_write(priv, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | - RG_SYSPLL_BIAS_LPF_EN); - core_write(priv, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - RG_SYSPLL_POSDIV(1)); - core_write(priv, CORE_PLL_GROUP7, - RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); - - /* Enable the MT7530 TRGMII clocks */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); + if (interface == PHY_INTERFACE_MODE_RGMII) { + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, + P6_INTF_MODE(0)); + return; } - return 0; -} + mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) -{ - u32 val; + xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK; - val = mt7530_read(priv, MT7531_TOP_SIG_SR); - - return (val & PAD_DUAL_SGMII_EN) != 0; -} - -static int -mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) -{ - return 0; + if (xtal == MT7530_XTAL_25MHZ) + ssc_delta = 0x57; + else + ssc_delta = 0x87; + + if (priv->id == ID_MT7621) { + /* PLL frequency: 125MHz: 1.0GBit */ + if (xtal == MT7530_XTAL_40MHZ) + ncpo1 = 0x0640; + if (xtal == MT7530_XTAL_25MHZ) + ncpo1 = 0x0a00; + } else { /* PLL frequency: 250MHz: 2.0Gbit */ + if (xtal == MT7530_XTAL_40MHZ) + ncpo1 = 0x0c80; + if (xtal == MT7530_XTAL_25MHZ) + ncpo1 = 0x1400; + } + + /* Setup the MT7530 TRGMII Tx Clock */ + core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); + core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); + core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); + core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta)); + core_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | + RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); + core_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL | + RG_SYSPLL_VODEN | RG_SYSPLL_POSDIV(1)); + core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | + RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + + /* Enable the MT7530 TRGMII clocks */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); } static void mt7531_pll_setup(struct mt7530_priv *priv) { + enum mt7531_xtal_fsel xtal; u32 top_sig; u32 hwstrap; - u32 xtal; u32 val; - if (mt7531_dual_sgmii_supported(priv)) - return; - val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); - hwstrap = mt7530_read(priv, MT7531_HWTRAP); + hwstrap = mt7530_read(priv, MT753X_TRAP); if ((val & CHIP_REV_M) > 0) - xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ : - HWTRAP_XTAL_FSEL_25MHZ; + xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ : + MT7531_XTAL_FSEL_25MHZ; else - xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK; + xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ : + MT7531_XTAL_FSEL_40MHZ; /* Step 1 : Disable MT7531 COREPLL */ val = mt7530_read(priv, MT7531_PLLGP_EN); @@ -549,13 +467,13 @@ mt7531_pll_setup(struct mt7530_priv *priv) usleep_range(25, 35); switch (xtal) { - case HWTRAP_XTAL_FSEL_25MHZ: + case MT7531_XTAL_FSEL_25MHZ: val = mt7530_read(priv, MT7531_PLLGP_CR0); val &= ~RG_COREPLL_SDM_PCW_M; val |= 0x140000 << RG_COREPLL_SDM_PCW_S; mt7530_write(priv, MT7531_PLLGP_CR0, val); break; - case HWTRAP_XTAL_FSEL_40MHZ: + case MT7531_XTAL_FSEL_40MHZ: val = mt7530_read(priv, MT7531_PLLGP_CR0); val &= ~RG_COREPLL_SDM_PCW_M; val |= 0x190000 << RG_COREPLL_SDM_PCW_S; @@ -836,8 +754,22 @@ mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, return; for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) - strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name, - ETH_GSTRING_LEN); + ethtool_puts(&data, mt7530_mib[i].name); +} + +static void +mt7530_read_port_stats(struct mt7530_priv *priv, int port, + u32 offset, u8 size, uint64_t *data) +{ + u32 val, reg = MT7530_PORT_MIB_COUNTER(port) + offset; + + val = mt7530_read(priv, reg); + *data = val; + + if (size == 2) { + val = mt7530_read(priv, reg + 4); + *data |= (u64)val << 32; + } } static void @@ -846,18 +778,13 @@ mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, { struct mt7530_priv *priv = ds->priv; const struct mt7530_mib_desc *mib; - u32 reg, i; - u64 hi; + int i; for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { mib = &mt7530_mib[i]; - reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; - data[i] = mt7530_read(priv, reg); - if (mib->size == 2) { - hi = mt7530_read(priv, reg + 4); - data[i] |= hi << 32; - } + mt7530_read_port_stats(priv, port, mib->offset, mib->size, + data + i); } } @@ -870,6 +797,172 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } +static void mt7530_get_eth_mac_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_mac_stats *mac_stats) +{ + struct mt7530_priv *priv = ds->priv; + + /* MIB counter doesn't provide a FramesTransmittedOK but instead + * provide stats for Unicast, Broadcast and Multicast frames separately. + * To simulate a global frame counter, read Unicast and addition Multicast + * and Broadcast later + */ + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_UNICAST, 1, + &mac_stats->FramesTransmittedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_SINGLE_COLLISION, 1, + &mac_stats->SingleCollisionFrames); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTIPLE_COLLISION, 1, + &mac_stats->MultipleCollisionFrames); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNICAST, 1, + &mac_stats->FramesReceivedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BYTES, 2, + &mac_stats->OctetsTransmittedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_ALIGN_ERR, 1, + &mac_stats->AlignmentErrors); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_DEFERRED, 1, + &mac_stats->FramesWithDeferredXmissions); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_LATE_COLLISION, 1, + &mac_stats->LateCollisions); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_EXCESSIVE_COLLISION, 1, + &mac_stats->FramesAbortedDueToXSColls); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BYTES, 2, + &mac_stats->OctetsReceivedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTICAST, 1, + &mac_stats->MulticastFramesXmittedOK); + mac_stats->FramesTransmittedOK += mac_stats->MulticastFramesXmittedOK; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BROADCAST, 1, + &mac_stats->BroadcastFramesXmittedOK); + mac_stats->FramesTransmittedOK += mac_stats->BroadcastFramesXmittedOK; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_MULTICAST, 1, + &mac_stats->MulticastFramesReceivedOK); + mac_stats->FramesReceivedOK += mac_stats->MulticastFramesReceivedOK; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BROADCAST, 1, + &mac_stats->BroadcastFramesReceivedOK); + mac_stats->FramesReceivedOK += mac_stats->BroadcastFramesReceivedOK; +} + +static const struct ethtool_rmon_hist_range mt7530_rmon_ranges[] = { + { 0, 64 }, + { 65, 127 }, + { 128, 255 }, + { 256, 511 }, + { 512, 1023 }, + { 1024, MT7530_MAX_MTU }, + {} +}; + +static void mt7530_get_rmon_stats(struct dsa_switch *ds, int port, + struct ethtool_rmon_stats *rmon_stats, + const struct ethtool_rmon_hist_range **ranges) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNDER_SIZE_ERR, 1, + &rmon_stats->undersize_pkts); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_OVER_SZ_ERR, 1, + &rmon_stats->oversize_pkts); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_FRAG_ERR, 1, + &rmon_stats->fragments); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_JABBER_ERR, 1, + &rmon_stats->jabbers); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_64, 1, + &rmon_stats->hist[0]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_65_TO_127, 1, + &rmon_stats->hist[1]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_128_TO_255, 1, + &rmon_stats->hist[2]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_256_TO_511, 1, + &rmon_stats->hist[3]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_512_TO_1023, 1, + &rmon_stats->hist[4]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_1024_TO_MAX, 1, + &rmon_stats->hist[5]); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_64, 1, + &rmon_stats->hist_tx[0]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_65_TO_127, 1, + &rmon_stats->hist_tx[1]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_128_TO_255, 1, + &rmon_stats->hist_tx[2]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_256_TO_511, 1, + &rmon_stats->hist_tx[3]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_512_TO_1023, 1, + &rmon_stats->hist_tx[4]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_1024_TO_MAX, 1, + &rmon_stats->hist_tx[5]); + + *ranges = mt7530_rmon_ranges; +} + +static void mt7530_get_stats64(struct dsa_switch *ds, int port, + struct rtnl_link_stats64 *storage) +{ + struct mt7530_priv *priv = ds->priv; + uint64_t data; + + /* MIB counter doesn't provide a FramesTransmittedOK but instead + * provide stats for Unicast, Broadcast and Multicast frames separately. + * To simulate a global frame counter, read Unicast and addition Multicast + * and Broadcast later + */ + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNICAST, 1, + &storage->rx_packets); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_MULTICAST, 1, + &storage->multicast); + storage->rx_packets += storage->multicast; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BROADCAST, 1, + &data); + storage->rx_packets += data; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_UNICAST, 1, + &storage->tx_packets); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTICAST, 1, + &data); + storage->tx_packets += data; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BROADCAST, 1, + &data); + storage->tx_packets += data; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BYTES, 2, + &storage->rx_bytes); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BYTES, 2, + &storage->tx_bytes); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_DROP, 1, + &storage->rx_dropped); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_DROP, 1, + &storage->tx_dropped); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_CRC_ERR, 1, + &storage->rx_crc_errors); +} + +static void mt7530_get_eth_ctrl_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_ctrl_stats *ctrl_stats) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PAUSE, 1, + &ctrl_stats->MACControlFramesTransmitted); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PAUSE, 1, + &ctrl_stats->MACControlFramesReceived); +} + static int mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) { @@ -910,21 +1003,15 @@ mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) return 0; } -static const char *p5_intf_modes(unsigned int p5_interface) +static const char *mt7530_p5_mode_str(unsigned int mode) { - switch (p5_interface) { - case P5_DISABLED: - return "DISABLED"; - case P5_INTF_SEL_PHY_P0: - return "PHY P0"; - case P5_INTF_SEL_PHY_P4: - return "PHY P4"; - case P5_INTF_SEL_GMAC5: - return "GMAC5"; - case P5_INTF_SEL_GMAC5_SGMII: - return "GMAC5_SGMII"; + switch (mode) { + case MUX_PHY_P0: + return "MUX PHY P0"; + case MUX_PHY_P4: + return "MUX PHY P4"; default: - return "unknown"; + return "GMAC5"; } } @@ -936,39 +1023,31 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) mutex_lock(&priv->reg_mutex); - val = mt7530_read(priv, MT7530_MHWTRAP); + val = mt7530_read(priv, MT753X_MTRAP); - val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; - val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; + val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE; - switch (priv->p5_intf_sel) { - case P5_INTF_SEL_PHY_P0: - /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */ - val |= MHWTRAP_PHY0_SEL; + switch (priv->p5_mode) { + /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */ + case MUX_PHY_P0: + val |= MT7530_P5_PHY0_SEL; fallthrough; - case P5_INTF_SEL_PHY_P4: - /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */ - val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; + /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */ + case MUX_PHY_P4: /* Setup the MAC by default for the cpu port */ - mt7530_write(priv, MT7530_PMCR_P(5), 0x56300); - break; - case P5_INTF_SEL_GMAC5: - /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ - val &= ~MHWTRAP_P5_DIS; - break; - case P5_DISABLED: - interface = PHY_INTERFACE_MODE_NA; + mt7530_write(priv, MT753X_PMCR_P(5), 0x56300); break; + + /* GMAC5: P5 -> SoC MAC or external PHY */ default: - dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", - priv->p5_intf_sel); - goto unlock_exit; + val |= MT7530_P5_MAC_SEL; + break; } /* Setup RGMII settings */ if (phy_interface_mode_is_rgmii(interface)) { - val |= MHWTRAP_P5_RGMII_MODE; + val |= MT7530_P5_RGMII_MODE; /* P5 RGMII RX Clock Control: delay setting for 1000M */ mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN); @@ -988,63 +1067,238 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1)); } - mt7530_write(priv, MT7530_MHWTRAP, val); + mt7530_write(priv, MT753X_MTRAP, val); - dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", - val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); + dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val, + mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface)); - priv->p5_interface = interface; - -unlock_exit: mutex_unlock(&priv->reg_mutex); } +/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) + * of the Open Systems Interconnection basic reference model (OSI/RM) are + * described; the medium access control (MAC) and logical link control (LLC) + * sublayers. The MAC sublayer is the one facing the physical layer. + * + * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A + * Bridge component comprises a MAC Relay Entity for interconnecting the Ports + * of the Bridge, at least two Ports, and higher layer entities with at least a + * Spanning Tree Protocol Entity included. + * + * Each Bridge Port also functions as an end station and shall provide the MAC + * Service to an LLC Entity. Each instance of the MAC Service is provided to a + * distinct LLC Entity that supports protocol identification, multiplexing, and + * demultiplexing, for protocol data unit (PDU) transmission and reception by + * one or more higher layer entities. + * + * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC + * Entity associated with each Bridge Port is modeled as being directly + * connected to the attached Local Area Network (LAN). + * + * On the switch with CPU port architecture, CPU port functions as Management + * Port, and the Management Port functionality is provided by software which + * functions as an end station. Software is connected to an IEEE 802 LAN that is + * wholly contained within the system that incorporates the Bridge. Software + * provides access to the LLC Entity associated with each Bridge Port by the + * value of the source port field on the special tag on the frame received by + * software. + * + * We call frames that carry control information to determine the active + * topology and current extent of each Virtual Local Area Network (VLAN), i.e., + * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration + * Protocol Data Units (MVRPDUs), and frames from other link constrained + * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and + * Link Layer Discovery Protocol (LLDP), link-local frames. They are not + * forwarded by a Bridge. Permanently configured entries in the filtering + * database (FDB) ensure that such frames are discarded by the Forwarding + * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: + * + * Each of the reserved MAC addresses specified in Table 8-1 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be + * permanently configured in the FDB in C-VLAN components and ERs. + * + * Each of the reserved MAC addresses specified in Table 8-2 + * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently + * configured in the FDB in S-VLAN components. + * + * Each of the reserved MAC addresses specified in Table 8-3 + * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in + * TPMR components. + * + * The FDB entries for reserved MAC addresses shall specify filtering for all + * Bridge Ports and all VIDs. Management shall not provide the capability to + * modify or remove entries for reserved MAC addresses. + * + * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of + * propagation of PDUs within a Bridged Network, as follows: + * + * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no + * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) + * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. + * PDUs transmitted using this destination address, or any other addresses + * that appear in Table 8-1, Table 8-2, and Table 8-3 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can + * therefore travel no further than those stations that can be reached via a + * single individual LAN from the originating station. + * + * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an + * address that no conformant S-VLAN component, C-VLAN component, or MAC + * Bridge can forward; however, this address is relayed by a TPMR component. + * PDUs using this destination address, or any of the other addresses that + * appear in both Table 8-1 and Table 8-2 but not in Table 8-3 + * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by + * any TPMRs but will propagate no further than the nearest S-VLAN component, + * C-VLAN component, or MAC Bridge. + * + * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address + * that no conformant C-VLAN component, MAC Bridge can forward; however, it is + * relayed by TPMR components and S-VLAN components. PDUs using this + * destination address, or any of the other addresses that appear in Table 8-1 + * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), + * will be relayed by TPMR components and S-VLAN components but will propagate + * no further than the nearest C-VLAN component or MAC Bridge. + * + * Because the LLC Entity associated with each Bridge Port is provided via CPU + * port, we must not filter these frames but forward them to CPU port. + * + * In a Bridge, the transmission Port is majorly decided by ingress and egress + * rules, FDB, and spanning tree Port State functions of the Forwarding Process. + * For link-local frames, only CPU port should be designated as destination port + * in the FDB, and the other functions of the Forwarding Process must not + * interfere with the decision of the transmission Port. We call this process + * trapping frames to CPU port. + * + * Therefore, on the switch with CPU port architecture, link-local frames must + * be trapped to CPU port, and certain link-local frames received by a Port of a + * Bridge comprising a TPMR component or an S-VLAN component must be excluded + * from it. + * + * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port + * MAC Relay (TPMR) component as a TPMR component supports only a subset of the + * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port + * doesn't count) of this architecture will either function as a standard MAC + * Bridge or a standard VLAN Bridge. + * + * Therefore, a Bridge of this architecture can only comprise S-VLAN components, + * C-VLAN components, or MAC Bridge components. Since there's no TPMR component, + * we don't need to relay PDUs using the destination addresses specified on the + * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge + * section where they must be relayed by TPMR components. + * + * One option to trap link-local frames to CPU port is to add static FDB entries + * with CPU port designated as destination port. However, because that + * Independent VLAN Learning (IVL) is being used on every VID, each entry only + * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC + * Bridge component or a C-VLAN component, there would have to be 16 times 4096 + * entries. This switch intellectual property can only hold a maximum of 2048 + * entries. Using this option, there also isn't a mechanism to prevent + * link-local frames from being discarded when the spanning tree Port State of + * the reception Port is discarding. + * + * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 + * registers. Whilst this applies to every VID, it doesn't contain all of the + * reserved MAC addresses without affecting the remaining Standard Group MAC + * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the + * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination + * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF + * destination addresses which may be relayed by MAC Bridges or VLAN Bridges. + * The latter option provides better but not complete conformance. + * + * This switch intellectual property also does not provide a mechanism to trap + * link-local frames with specific destination addresses to CPU port by Bridge, + * to conform to the filtering rules for the distinct Bridge components. + * + * Therefore, regardless of the type of the Bridge component, link-local frames + * with these destination addresses will be trapped to CPU port: + * + * 01-80-C2-00-00-[00,01,02,03,0E] + * + * In a Bridge comprising a MAC Bridge component or a C-VLAN component: + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] + * + * In a Bridge comprising an S-VLAN component: + * + * Link-local frames with these destination addresses will be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-00 + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A] + * + * To trap link-local frames to CPU port as conformant as this switch + * intellectual property can allow, link-local frames are made to be regarded as + * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual + * property only lets the frames regarded as BPDUs bypass the spanning tree Port + * State function of the Forwarding Process. + * + * The only remaining interference is the ingress rules. When the reception Port + * has no PVID assigned on software, VLAN-untagged frames won't be allowed in. + * There doesn't seem to be a mechanism on the switch intellectual property to + * have link-local frames bypass this function of the Forwarding Process. + */ static void mt753x_trap_frames(struct mt7530_priv *priv) { - /* Trap BPDUs to the CPU port(s) */ - mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, - MT753X_BPDU_CPU_ONLY); - - /* Trap 802.1X PAE frames to the CPU port(s) */ - mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_PORT_FW_MASK, - MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY)); - - /* Trap LLDP frames with :0E MAC DA to the CPU port(s) */ - mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK, - MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY)); + /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them + * VLAN-untagged. + */ + mt7530_rmw(priv, MT753X_BPC, + PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK | + BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK, + PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) | + BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + TO_CPU_FW_CPU_ONLY); + + /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress + * them VLAN-untagged. + */ + mt7530_rmw(priv, MT753X_RGAC1, + R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK | + R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK, + R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR | + R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + TO_CPU_FW_CPU_ONLY); + + /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress + * them VLAN-untagged. + */ + mt7530_rmw(priv, MT753X_RGAC2, + R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK | + R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK, + R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR | + R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + TO_CPU_FW_CPU_ONLY); } -static int +static void mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - int ret; - - /* Setup max capability of CPU port at first */ - if (priv->info->cpu_port_config) { - ret = priv->info->cpu_port_config(ds, port); - if (ret) - return ret; - } /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); /* Enable flooding on the CPU port */ - mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | + mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); - /* Set CPU port number */ - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that * is affine to the inbound user port. */ - if (priv->id == ID_MT7531 || priv->id == ID_MT7988) + if (priv->id == ID_MT7531 || priv->id == ID_MT7988 || + priv->id == ID_EN7581 || priv->id == ID_AN7583) mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); /* CPU port gets connected to all user ports of @@ -1056,8 +1310,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE); - - return 0; } static int @@ -1081,10 +1333,17 @@ mt7530_port_enable(struct dsa_switch *ds, int port, priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return 0; + + if (port == 5) + mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS); + else if (port == 6) + mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS); + return 0; } @@ -1101,9 +1360,17 @@ mt7530_port_disable(struct dsa_switch *ds, int port) priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); + + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return; + + /* Do not set MT7530_P5_DIS when port 5 is being used for PHY muxing. */ + if (port == 5 && priv->p5_mode == GMAC5) + mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS); + else if (port == 6) + mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS); } static int @@ -1114,7 +1381,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) u32 val; /* When a new MTU is set, DSA always set the CPU port's MTU to the - * largest MTU of the slave ports. Because the switch only has a global + * largest MTU of the user ports. Because the switch only has a global * RX length register, only allowing CPU port here is enough. */ if (!dsa_is_cpu_port(ds, port)) @@ -1181,13 +1448,62 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) FID_PST(FID_BRIDGED, stp_state)); } +static void mt7530_update_port_member(struct mt7530_priv *priv, int port, + const struct net_device *bridge_dev, + bool join) __must_hold(&priv->reg_mutex) +{ + struct dsa_port *dp = dsa_to_port(priv->ds, port), *other_dp; + struct mt7530_port *p = &priv->ports[port], *other_p; + struct dsa_port *cpu_dp = dp->cpu_dp; + u32 port_bitmap = BIT(cpu_dp->index); + int other_port; + bool isolated; + + dsa_switch_for_each_user_port(other_dp, priv->ds) { + other_port = other_dp->index; + other_p = &priv->ports[other_port]; + + if (dp == other_dp) + continue; + + /* Add/remove this port to/from the port matrix of the other + * ports in the same bridge. If the port is disabled, port + * matrix is kept and not being setup until the port becomes + * enabled. + */ + if (!dsa_port_offloads_bridge_dev(other_dp, bridge_dev)) + continue; + + isolated = p->isolated && other_p->isolated; + + if (join && !isolated) { + other_p->pm |= PCR_MATRIX(BIT(port)); + port_bitmap |= BIT(other_port); + } else { + other_p->pm &= ~PCR_MATRIX(BIT(port)); + } + + if (other_p->enable) + mt7530_rmw(priv, MT7530_PCR_P(other_port), + PCR_MATRIX_MASK, other_p->pm); + } + + /* Add/remove the all other ports to this port matrix. For !join + * (leaving the bridge), only the CPU port will remain in the port matrix + * of this port. + */ + p->pm = PCR_MATRIX(port_bitmap); + if (priv->ports[port].enable) + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, p->pm); +} + static int mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | - BR_BCAST_FLOOD)) + BR_BCAST_FLOOD | BR_ISOLATED)) return -EINVAL; return 0; @@ -1205,17 +1521,28 @@ mt7530_port_bridge_flags(struct dsa_switch *ds, int port, flags.val & BR_LEARNING ? 0 : SA_DIS); if (flags.mask & BR_FLOOD) - mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)), + mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)), flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0); if (flags.mask & BR_MCAST_FLOOD) - mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)), + mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)), flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0); if (flags.mask & BR_BCAST_FLOOD) - mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)), + mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)), flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0); + if (flags.mask & BR_ISOLATED) { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bridge_dev = dsa_port_bridge_dev_get(dp); + + priv->ports[port].isolated = !!(flags.val & BR_ISOLATED); + + mutex_lock(&priv->reg_mutex); + mt7530_update_port_member(priv, port, bridge_dev, true); + mutex_unlock(&priv->reg_mutex); + } + return 0; } @@ -1224,39 +1551,11 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, struct netlink_ext_ack *extack) { - struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; - struct dsa_port *cpu_dp = dp->cpu_dp; - u32 port_bitmap = BIT(cpu_dp->index); struct mt7530_priv *priv = ds->priv; mutex_lock(&priv->reg_mutex); - dsa_switch_for_each_user_port(other_dp, ds) { - int other_port = other_dp->index; - - if (dp == other_dp) - continue; - - /* Add this port to the port matrix of the other ports in the - * same bridge. If the port is disabled, port matrix is kept - * and not being setup until the port becomes enabled. - */ - if (!dsa_port_offloads_bridge(other_dp, &bridge)) - continue; - - if (priv->ports[other_port].enable) - mt7530_set(priv, MT7530_PCR_P(other_port), - PCR_MATRIX(BIT(port))); - priv->ports[other_port].pm |= PCR_MATRIX(BIT(port)); - - port_bitmap |= BIT(other_port); - } - - /* Add the all other ports to this port matrix. */ - if (priv->ports[port].enable) - mt7530_rmw(priv, MT7530_PCR_P(port), - PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); - priv->ports[port].pm |= PCR_MATRIX(port_bitmap); + mt7530_update_port_member(priv, port, bridge.dev, true); /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, @@ -1291,7 +1590,7 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, G0_PORT_VID_DEF); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + for (i = 0; i < priv->ds->num_ports; i++) { if (dsa_is_user_port(ds, i) && dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { all_user_ports_removed = false; @@ -1357,38 +1656,11 @@ static void mt7530_port_bridge_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) { - struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; - struct dsa_port *cpu_dp = dp->cpu_dp; struct mt7530_priv *priv = ds->priv; mutex_lock(&priv->reg_mutex); - dsa_switch_for_each_user_port(other_dp, ds) { - int other_port = other_dp->index; - - if (dp == other_dp) - continue; - - /* Remove this port from the port matrix of the other ports - * in the same bridge. If the port is disabled, port matrix - * is kept and not being setup until the port becomes enabled. - */ - if (!dsa_port_offloads_bridge(other_dp, &bridge)) - continue; - - if (priv->ports[other_port].enable) - mt7530_clear(priv, MT7530_PCR_P(other_port), - PCR_MATRIX(BIT(port))); - priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port)); - } - - /* Set the cpu port to be the only one in the port matrix of - * this port. - */ - if (priv->ports[port].enable) - mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, - PCR_MATRIX(BIT(cpu_dp->index))); - priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index)); + mt7530_update_port_member(priv, port, bridge.dev, false); /* When a port is removed from the bridge, the port would be set up * back to the default as is at initial boot which is a VLAN-unaware @@ -1749,18 +2021,6 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port, return 0; } -static int mt753x_mirror_port_get(unsigned int id, u32 val) -{ - return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : - MIRROR_PORT(val); -} - -static int mt753x_mirror_port_set(unsigned int id, u32 val) -{ - return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : - MIRROR_PORT(val); -} - static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress, struct netlink_ext_ack *extack) @@ -1776,14 +2036,14 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); /* MT7530 only supports one monitor port */ - monitor_port = mt753x_mirror_port_get(priv->id, val); + monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val); if (val & MT753X_MIRROR_EN(priv->id) && monitor_port != mirror->to_local_port) return -EEXIST; val |= MT753X_MIRROR_EN(priv->id); - val &= ~MT753X_MIRROR_MASK(priv->id); - val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port); + val &= ~MT753X_MIRROR_PORT_MASK(priv->id); + val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port); mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); val = mt7530_read(priv, MT7530_PCR_P(port)); @@ -1852,7 +2112,7 @@ mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); } -static void +static int mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { struct mt7530_priv *priv = gpiochip_get_data(gc); @@ -1862,6 +2122,8 @@ mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); else mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); + + return 0; } static int @@ -1934,131 +2196,6 @@ mt7530_setup_gpio(struct mt7530_priv *priv) } #endif /* CONFIG_GPIOLIB */ -static irqreturn_t -mt7530_irq_thread_fn(int irq, void *dev_id) -{ - struct mt7530_priv *priv = dev_id; - bool handled = false; - u32 val; - int p; - - mt7530_mutex_lock(priv); - val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); - mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); - mt7530_mutex_unlock(priv); - - for (p = 0; p < MT7530_NUM_PHYS; p++) { - if (BIT(p) & val) { - unsigned int irq; - - irq = irq_find_mapping(priv->irq_domain, p); - handle_nested_irq(irq); - handled = true; - } - } - - return IRQ_RETVAL(handled); -} - -static void -mt7530_irq_mask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable &= ~BIT(d->hwirq); -} - -static void -mt7530_irq_unmask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable |= BIT(d->hwirq); -} - -static void -mt7530_irq_bus_lock(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - mt7530_mutex_lock(priv); -} - -static void -mt7530_irq_bus_sync_unlock(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); - mt7530_mutex_unlock(priv); -} - -static struct irq_chip mt7530_irq_chip = { - .name = KBUILD_MODNAME, - .irq_mask = mt7530_irq_mask, - .irq_unmask = mt7530_irq_unmask, - .irq_bus_lock = mt7530_irq_bus_lock, - .irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock, -}; - -static int -mt7530_irq_map(struct irq_domain *domain, unsigned int irq, - irq_hw_number_t hwirq) -{ - irq_set_chip_data(irq, domain->host_data); - irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq); - irq_set_nested_thread(irq, true); - irq_set_noprobe(irq); - - return 0; -} - -static const struct irq_domain_ops mt7530_irq_domain_ops = { - .map = mt7530_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -static void -mt7988_irq_mask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable &= ~BIT(d->hwirq); - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); -} - -static void -mt7988_irq_unmask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable |= BIT(d->hwirq); - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); -} - -static struct irq_chip mt7988_irq_chip = { - .name = KBUILD_MODNAME, - .irq_mask = mt7988_irq_mask, - .irq_unmask = mt7988_irq_unmask, -}; - -static int -mt7988_irq_map(struct irq_domain *domain, unsigned int irq, - irq_hw_number_t hwirq) -{ - irq_set_chip_data(irq, domain->host_data); - irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq); - irq_set_nested_thread(irq, true); - irq_set_noprobe(irq); - - return 0; -} - -static const struct irq_domain_ops mt7988_irq_domain_ops = { - .map = mt7988_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - static void mt7530_setup_mdio_irq(struct mt7530_priv *priv) { @@ -2070,54 +2207,77 @@ mt7530_setup_mdio_irq(struct mt7530_priv *priv) unsigned int irq; irq = irq_create_mapping(priv->irq_domain, p); - ds->slave_mii_bus->irq[p] = irq; + ds->user_mii_bus->irq[p] = irq; } } } +static const struct regmap_irq mt7530_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 32), /* PHY0_LC */ + REGMAP_IRQ_REG_LINE(1, 32), /* PHY1_LC */ + REGMAP_IRQ_REG_LINE(2, 32), /* PHY2_LC */ + REGMAP_IRQ_REG_LINE(3, 32), /* PHY3_LC */ + REGMAP_IRQ_REG_LINE(4, 32), /* PHY4_LC */ + REGMAP_IRQ_REG_LINE(5, 32), /* PHY5_LC */ + REGMAP_IRQ_REG_LINE(6, 32), /* PHY6_LC */ + REGMAP_IRQ_REG_LINE(16, 32), /* MAC_PC */ + REGMAP_IRQ_REG_LINE(17, 32), /* BMU */ + REGMAP_IRQ_REG_LINE(18, 32), /* MIB */ + REGMAP_IRQ_REG_LINE(22, 32), /* ARL_COL_FULL_COL */ + REGMAP_IRQ_REG_LINE(23, 32), /* ARL_COL_FULL */ + REGMAP_IRQ_REG_LINE(24, 32), /* ARL_TBL_ERR */ + REGMAP_IRQ_REG_LINE(25, 32), /* ARL_PKT_QERR */ + REGMAP_IRQ_REG_LINE(26, 32), /* ARL_EQ_ERR */ + REGMAP_IRQ_REG_LINE(27, 32), /* ARL_PKT_BC */ + REGMAP_IRQ_REG_LINE(28, 32), /* ARL_SEC_IG1X */ + REGMAP_IRQ_REG_LINE(29, 32), /* ARL_SEC_VLAN */ + REGMAP_IRQ_REG_LINE(30, 32), /* ARL_SEC_TAG */ + REGMAP_IRQ_REG_LINE(31, 32), /* ACL */ +}; + +static const struct regmap_irq_chip mt7530_regmap_irq_chip = { + .name = KBUILD_MODNAME, + .status_base = MT7530_SYS_INT_STS, + .unmask_base = MT7530_SYS_INT_EN, + .ack_base = MT7530_SYS_INT_STS, + .init_ack_masked = true, + .irqs = mt7530_irqs, + .num_irqs = ARRAY_SIZE(mt7530_irqs), + .num_regs = 1, +}; + static int mt7530_setup_irq(struct mt7530_priv *priv) { + struct regmap_irq_chip_data *irq_data; struct device *dev = priv->dev; struct device_node *np = dev->of_node; - int ret; + int irq, ret; if (!of_property_read_bool(np, "interrupt-controller")) { dev_info(dev, "no interrupt support\n"); return 0; } - priv->irq = of_irq_get(np, 0); - if (priv->irq <= 0) { - dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq); - return priv->irq ? : -EINVAL; - } - - if (priv->id == ID_MT7988) - priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, - &mt7988_irq_domain_ops, - priv); - else - priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, - &mt7530_irq_domain_ops, - priv); - - if (!priv->irq_domain) { - dev_err(dev, "failed to create IRQ domain\n"); - return -ENOMEM; + irq = of_irq_get(np, 0); + if (irq <= 0) { + dev_err(dev, "failed to get parent IRQ: %d\n", irq); + return irq ? : -EINVAL; } /* This register must be set for MT7530 to properly fire interrupts */ - if (priv->id != ID_MT7531) + if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); - ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, - IRQF_ONESHOT, KBUILD_MODNAME, priv); - if (ret) { - irq_domain_remove(priv->irq_domain); - dev_err(dev, "failed to request IRQ: %d\n", ret); + ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + priv->regmap, irq, + IRQF_ONESHOT, + 0, &mt7530_regmap_irq_chip, + &irq_data); + if (ret) return ret; - } + + priv->irq_domain = regmap_irq_get_domain(irq_data); return 0; } @@ -2137,34 +2297,30 @@ mt7530_free_mdio_irq(struct mt7530_priv *priv) } } -static void -mt7530_free_irq_common(struct mt7530_priv *priv) -{ - free_irq(priv->irq, priv); - irq_domain_remove(priv->irq_domain); -} - -static void -mt7530_free_irq(struct mt7530_priv *priv) -{ - mt7530_free_mdio_irq(priv); - mt7530_free_irq_common(priv); -} - static int mt7530_setup_mdio(struct mt7530_priv *priv) { + struct device_node *mnp, *np = priv->dev->of_node; struct dsa_switch *ds = priv->ds; struct device *dev = priv->dev; struct mii_bus *bus; static int idx; - int ret; + int ret = 0; + + mnp = of_get_child_by_name(np, "mdio"); + + if (mnp && !of_device_is_available(mnp)) + goto out; bus = devm_mdiobus_alloc(dev); - if (!bus) - return -ENOMEM; + if (!bus) { + ret = -ENOMEM; + goto out; + } + + if (!mnp) + ds->user_mii_bus = bus; - ds->slave_mii_bus = bus; bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); @@ -2175,16 +2331,18 @@ mt7530_setup_mdio(struct mt7530_priv *priv) bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; - if (priv->irq) + if (priv->irq_domain && !mnp) mt7530_setup_mdio_irq(priv); - ret = devm_mdiobus_register(dev, bus); + ret = devm_of_mdiobus_register(dev, bus, mnp); if (ret) { dev_err(dev, "failed to register MDIO bus: %d\n", ret); - if (priv->irq) + if (priv->irq_domain && !mnp) mt7530_free_mdio_irq(priv); } +out: + of_node_put(mnp); return ret; } @@ -2201,20 +2359,20 @@ mt7530_setup(struct dsa_switch *ds) u32 id, val; int ret, i; - /* The parent node of master netdev which holds the common system + /* The parent node of conduit netdev which holds the common system * controller also is the container for two GMACs nodes representing * as two netdev instances. */ dsa_switch_for_each_cpu_port(cpu_dp, ds) { - dn = cpu_dp->master->dev.of_node->parent; + dn = cpu_dp->conduit->dev.of_node->parent; /* It doesn't matter which CPU port is found first, - * their masters should share the same parent OF node + * their conduits should share the same parent OF node */ break; } if (!dn) { - dev_err(ds->dev, "parent OF node of DSA master not found"); + dev_err(ds->dev, "parent OF node of DSA conduit not found"); return -EINVAL; } @@ -2244,16 +2402,16 @@ mt7530_setup(struct dsa_switch *ds) */ if (priv->mcm) { reset_control_assert(priv->rstc); - usleep_range(1000, 1100); + usleep_range(5000, 5100); reset_control_deassert(priv->rstc); } else { gpiod_set_value_cansleep(priv->reset, 0); - usleep_range(1000, 1100); + usleep_range(5000, 5100); gpiod_set_value_cansleep(priv->reset, 1); } /* Waiting for MT7530 got to stable */ - INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); + INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP); ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 20, 1000000); if (ret < 0) { @@ -2268,13 +2426,17 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } + if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) { + dev_err(priv->dev, + "MT7530 with a 20MHz XTAL is not supported!\n"); + return -EINVAL; + } + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); - mt7530_pll_setup(priv); - /* Lower Tx driving for TRGMII path */ for (i = 0; i < NUM_TRGMII_CTRL; i++) mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), @@ -2284,20 +2446,29 @@ mt7530_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_MASK, RD_TAP(16)); - /* Enable port 6 */ - val = mt7530_read(priv, MT7530_MHWTRAP); - val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; - val |= MHWTRAP_MANUAL; - mt7530_write(priv, MT7530_MHWTRAP, val); + /* Allow modifying the trap and directly access PHY registers via the + * MDIO bus the switch is on. + */ + mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP | + MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP); - priv->p6_interface = PHY_INTERFACE_MODE_NA; + if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ) + mt7530_pll_setup(priv); mt753x_trap_frames(priv); /* Enable and reset MIB counters */ mt7530_mib_reset(ds); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + for (i = 0; i < priv->ds->num_ports; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT753X_PMCR_P(i), + PMCR_LINK_SETTINGS_MASK | + MT753X_FORCE_MODE(priv->id), + MT753X_FORCE_MODE(priv->id)); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2306,9 +2477,7 @@ mt7530_setup(struct dsa_switch *ds) mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2321,22 +2490,20 @@ mt7530_setup(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Setup VLAN ID 0 for VLAN-unaware bridges */ ret = mt7530_setup_vlan0(priv); if (ret) return ret; - /* Setup port 5 */ - priv->p5_intf_sel = P5_DISABLED; - interface = PHY_INTERFACE_MODE_NA; - - if (!dsa_is_unused_port(ds, 5)) { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; - ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface); - if (ret && ret != -ENODEV) - return ret; - } else { - /* Scan the ethernet nodes. look for GMAC1, lookup used phy */ + /* Check for PHY muxing on port 5 */ + if (dsa_is_unused_port(ds, 5)) { + /* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY. + * Set priv->p5_mode to the appropriate value if PHY muxing is + * detected. + */ for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) @@ -2350,7 +2517,8 @@ mt7530_setup(struct dsa_switch *ds) if (!phy_node) continue; - if (phy_node->parent == priv->dev->of_node->parent) { + if (phy_node->parent == priv->dev->of_node->parent || + phy_node->parent->parent == priv->dev->of_node) { ret = of_get_phy_mode(mac_np, &interface); if (ret && ret != -ENODEV) { of_node_put(mac_np); @@ -2359,14 +2527,20 @@ mt7530_setup(struct dsa_switch *ds) } id = of_mdio_parse_addr(ds->dev, phy_node); if (id == 0) - priv->p5_intf_sel = P5_INTF_SEL_PHY_P0; + priv->p5_mode = MUX_PHY_P0; if (id == 4) - priv->p5_intf_sel = P5_INTF_SEL_PHY_P4; + priv->p5_mode = MUX_PHY_P4; } of_node_put(mac_np); of_node_put(phy_node); break; } + + if (priv->p5_mode == MUX_PHY_P0 || + priv->p5_mode == MUX_PHY_P4) { + mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS); + mt7530_setup_port5(ds, interface); + } } #ifdef CONFIG_GPIOLIB @@ -2377,8 +2551,6 @@ mt7530_setup(struct dsa_switch *ds) } #endif /* CONFIG_GPIOLIB */ - mt7530_setup_port5(ds, interface); - /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -2393,16 +2565,27 @@ mt7531_setup_common(struct dsa_switch *ds) struct mt7530_priv *priv = ds->priv; int ret, i; + ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + mt753x_trap_frames(priv); /* Enable and reset MIB counters */ mt7530_mib_reset(ds); /* Disable flooding on all ports */ - mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | + mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + for (i = 0; i < priv->ds->num_ports; i++) { + /* Clear link settings and enable force mode to force link down + * on all ports until they're enabled later. + */ + mt7530_rmw(priv, MT753X_PMCR_P(i), + PMCR_LINK_SETTINGS_MASK | + MT753X_FORCE_MODE(priv->id), + MT753X_FORCE_MODE(priv->id)); + /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -2413,9 +2596,7 @@ mt7531_setup_common(struct dsa_switch *ds) mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2429,12 +2610,21 @@ mt7531_setup_common(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + + /* Enable Special Tag for rx frames */ + if (priv->id == ID_EN7581 || priv->id == ID_AN7583) + mt7530_write(priv, MT753X_CPORT_SPTAG_CFG, + CPORT_SW2FE_STAG_EN | CPORT_FE2SW_STAG_EN); + /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) return ret; - return 0; + /* Setup VLAN ID 0 for VLAN-unaware bridges */ + return mt7530_setup_vlan0(priv); } static int @@ -2450,16 +2640,16 @@ mt7531_setup(struct dsa_switch *ds) */ if (priv->mcm) { reset_control_assert(priv->rstc); - usleep_range(1000, 1100); + usleep_range(5000, 5100); reset_control_deassert(priv->rstc); } else { gpiod_set_value_cansleep(priv->reset, 0); - usleep_range(1000, 1100); + usleep_range(5000, 5100); gpiod_set_value_cansleep(priv->reset, 1); } /* Waiting for MT7530 got to stable */ - INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); + INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP); ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 20, 1000000); if (ret < 0) { @@ -2475,73 +2665,78 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } - /* all MACs must be forced link-down before sw reset */ - for (i = 0; i < MT7530_NUM_PORTS; i++) - mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); - - /* Reset the switch through internal reset */ - mt7530_write(priv, MT7530_SYS_CTRL, - SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | - SYS_CTRL_REG_RST); + /* MT7531AE has got two SGMII units. One for port 5, one for port 6. + * MT7531BE has got only one SGMII unit which is for port 6. + */ + val = mt7530_read(priv, MT7531_TOP_SIG_SR); + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); - mt7531_pll_setup(priv); + /* Force link down on all ports before internal reset */ + for (i = 0; i < priv->ds->num_ports; i++) + mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK); - if (mt7531_dual_sgmii_supported(priv)) { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; + /* Reset the switch through internal reset */ + mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); - /* Let ds->slave_mii_bus be able to access external phy. */ + if (!priv->p5_sgmii) { + mt7531_pll_setup(priv); + } else { + /* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on + * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO + * to expose the MDIO bus of the switch. + */ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, MT7531_EXT_P_MDC_11); mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, MT7531_EXT_P_MDIO_12); - } else { - priv->p5_intf_sel = P5_INTF_SEL_GMAC5; } - dev_dbg(ds->dev, "P5 support %s interface\n", - p5_intf_modes(priv->p5_intf_sel)); mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); - /* Let phylink decide the interface later. */ - priv->p5_interface = PHY_INTERFACE_MODE_NA; - priv->p6_interface = PHY_INTERFACE_MODE_NA; - - /* Enable PHY core PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we provide - * our own mt7531_ind_mmd_phy_[read,write] to complete this - * function. + /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since + * phy_device has not yet been created provided for + * phy_[read,write]_mmd_indirect is called, we provide our own + * mt7531_ind_mmd_phy_[read,write] to complete this function. */ - val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, + val = mt7531_ind_c45_phy_read(priv, + MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), MDIO_MMD_VEND2, CORE_PLL_GROUP4); - val |= MT7531_PHY_PLL_BYPASS_MODE; + val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE; val &= ~MT7531_PHY_PLL_OFF; - mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, - CORE_PLL_GROUP4, val); + mt7531_ind_c45_phy_write(priv, + MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr), + MDIO_MMD_VEND2, CORE_PLL_GROUP4, val); - mt7531_setup_common(ds); + /* Disable EEE advertisement on the switch PHYs. */ + for (i = MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr); + i < MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr) + MT7530_NUM_PHYS; + i++) { + mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV, + 0); + } - /* Setup VLAN ID 0 for VLAN-unaware bridges */ - ret = mt7530_setup_vlan0(priv); + ret = mt7531_setup_common(ds); if (ret) return ret; - ds->assisted_learning_on_cpu_port = true; - ds->mtu_enforcement_ingress = true; - return 0; } static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD; + switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + /* Port 5 supports rgmii with delays, mii, and gmii. */ + case 5: phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); @@ -2549,7 +2744,8 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, config->supported_interfaces); break; - case 6: /* 1st cpu port */ + /* Port 6 supports rgmii and trgmii. */ + case 6: __set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_TRGMII, @@ -2558,30 +2754,32 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, } } -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) -{ - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); -} - static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD; + switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); break; - case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ - if (mt7531_is_rgmii_port(priv, port)) { + /* Port 5 supports rgmii with delays on MT7531BE, sgmii/802.3z on + * MT7531AE. + */ + case 5: + if (!priv->p5_sgmii) { phy_interface_set_rgmii(config->supported_interfaces); break; } fallthrough; - case 6: /* 1st cpu port supports sgmii/8023z only */ + /* Port 6 supports sgmii/802.3z. */ + case 6: __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, @@ -2597,57 +2795,65 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { - phy_interface_zero(config->supported_interfaces); - switch (port) { - case 0 ... 4: /* Internal phy */ + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 3: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); + + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD; break; + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ case 6: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10000FD; + + config->mac_capabilities |= MAC_10000FD; + break; } } -static int -mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) +static void en7581_mac_port_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) { - struct mt7530_priv *priv = ds->priv; + switch (port) { + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD; + break; + + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); - return priv->info->pad_setup(ds, state->interface); + config->mac_capabilities |= MAC_10000FD; + break; + } } -static int +static void mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; - /* Only need to setup port5. */ - if (port != 5) - return 0; - - mt7530_setup_port5(priv->ds, interface); - - return 0; + if (port == 5) + mt7530_setup_port5(priv->ds, interface); + else if (port == 6) + mt7530_setup_port6(priv->ds, interface); } -static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, - phy_interface_t interface, - struct phy_device *phydev) +static void mt7531_rgmii_setup(struct mt7530_priv *priv, + phy_interface_t interface, + struct phy_device *phydev) { u32 val; - if (!mt7531_is_rgmii_port(priv, port)) { - dev_err(priv->dev, "RGMII mode is not available for port %d\n", - port); - return -EINVAL; - } - val = mt7530_read(priv, MT7531_CLKGEN_CTRL); val |= GP_CLK_EN; val &= ~GP_MODE_MASK; @@ -2675,31 +2881,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, case PHY_INTERFACE_MODE_RGMII_ID: break; default: - return -EINVAL; + break; } } - mt7530_write(priv, MT7531_CLKGEN_CTRL, val); - - return 0; -} - -static bool mt753x_is_mac_port(u32 port) -{ - return (port == 5 || port == 6); -} -static int -mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface) -{ - if (dsa_is_cpu_port(ds, port) && - interface == PHY_INTERFACE_MODE_INTERNAL) - return 0; - - return -EINVAL; + mt7530_write(priv, MT7531_CLKGEN_CTRL, val); } -static int +static void mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { @@ -2707,156 +2896,78 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, struct phy_device *phydev; struct dsa_port *dp; - if (!mt753x_is_mac_port(port)) { - dev_err(priv->dev, "port %d is not a MAC port\n", port); - return -EINVAL; - } - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: + if (phy_interface_mode_is_rgmii(interface)) { dp = dsa_to_port(ds, port); - phydev = dp->slave->phydev; - return mt7531_rgmii_setup(priv, port, interface, phydev); - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_NA: - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - /* handled in SGMII PCS driver */ - return 0; - default: - return -EINVAL; + phydev = dp->user->phydev; + mt7531_rgmii_setup(priv, interface, phydev); } - - return -EINVAL; -} - -static int -mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - const struct phylink_link_state *state) -{ - struct mt7530_priv *priv = ds->priv; - - return priv->info->mac_port_config(ds, port, mode, state->interface); } static struct phylink_pcs * -mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port, +mt753x_phylink_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { - struct mt7530_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; switch (interface) { case PHY_INTERFACE_MODE_TRGMII: - return &priv->pcs[port].pcs; + return &priv->pcs[dp->index].pcs; case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_1000BASEX: case PHY_INTERFACE_MODE_2500BASEX: - return priv->ports[port].sgmii_pcs; + return priv->ports[dp->index].sgmii_pcs; default: return NULL; } } static void -mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, +mt753x_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; - - switch (port) { - case 0 ... 4: /* Internal phy */ - if (state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL) - goto unsupported; - break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (priv->p5_interface == state->interface) - break; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct dsa_switch *ds = dp->ds; + struct mt7530_priv *priv; + int port = dp->index; - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; + priv = ds->priv; - if (priv->p5_intf_sel != P5_DISABLED) - priv->p5_interface = state->interface; - break; - case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) - break; - - mt753x_pad_setup(ds, state); - - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - - priv->p6_interface = state->interface; - break; - default: -unsupported: - dev_err(ds->dev, "%s: unsupported %s port: %i\n", - __func__, phy_modes(state->interface), port); - return; - } - - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); + if ((port == 5 || port == 6) && priv->info->mac_port_config) + priv->info->mac_port_config(ds, port, mode, state->interface); /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY); } -static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void mt753x_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct mt7530_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); + mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK); } -static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs, - unsigned int mode, - phy_interface_t interface, - int speed, int duplex) -{ - if (pcs->ops->pcs_link_up) - pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex); -} - -static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void mt753x_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct mt7530_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; u32 mcr; - mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; - - /* MT753x MAC works in 1G full duplex mode for all up-clocked - * variants. - */ - if (interface == PHY_INTERFACE_MODE_INTERNAL || - interface == PHY_INTERFACE_MODE_TRGMII || - (phy_interface_mode_is_8023z(interface))) { - speed = SPEED_1000; - duplex = DUPLEX_FULL; - } + mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK; switch (speed) { case SPEED_1000: + case SPEED_2500: + case SPEED_10000: mcr |= PMCR_FORCE_SPEED_1000; break; case SPEED_100: @@ -2866,80 +2977,46 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, if (duplex == DUPLEX_FULL) { mcr |= PMCR_FORCE_FDX; if (tx_pause) - mcr |= PMCR_TX_FC_EN; + mcr |= PMCR_FORCE_TX_FC_EN; if (rx_pause) - mcr |= PMCR_RX_FC_EN; + mcr |= PMCR_FORCE_RX_FC_EN; } - if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { - switch (speed) { - case SPEED_1000: - mcr |= PMCR_FORCE_EEE1G; - break; - case SPEED_100: - mcr |= PMCR_FORCE_EEE100; - break; - } - } - - mt7530_set(priv, MT7530_PMCR_P(port), mcr); + mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr); } -static int -mt7531_cpu_port_config(struct dsa_switch *ds, int port) +static void mt753x_phylink_mac_disable_tx_lpi(struct phylink_config *config) { - struct mt7530_priv *priv = ds->priv; - phy_interface_t interface; - int speed; - int ret; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; - switch (port) { - case 5: - if (mt7531_is_rgmii_port(priv, port)) - interface = PHY_INTERFACE_MODE_RGMII; - else - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p5_interface = interface; - break; - case 6: - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p6_interface = interface; - break; - default: - return -EINVAL; - } - - if (interface == PHY_INTERFACE_MODE_2500BASEX) - speed = SPEED_2500; - else - speed = SPEED_1000; - - ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); - if (ret) - return ret; - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED, - interface, speed, DUPLEX_FULL); - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, - speed, DUPLEX_FULL, true, true); - - return 0; + mt7530_clear(priv, MT753X_PMCR_P(dp->index), + PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100); } -static int -mt7988_cpu_port_config(struct dsa_switch *ds, int port) +static int mt753x_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) { - struct mt7530_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; + u32 val; - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); + /* If the timer is zero, then set LPI_MODE_EN, which allows the + * system to enter LPI mode immediately rather than waiting for + * the LPI threshold. + */ + if (!timer) + val = LPI_MODE_EN; + else if (FIELD_FIT(LPI_THRESH_MASK, timer)) + val = FIELD_PREP(LPI_THRESH_MASK, timer); + else + val = LPI_THRESH_MASK; - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, - PHY_INTERFACE_MODE_INTERNAL, NULL, - SPEED_10000, DUPLEX_FULL, true, true); + mt7530_rmw(priv, MT753X_PMEEECR_P(dp->index), + LPI_THRESH_MASK | LPI_MODE_EN, val); + + mt7530_set(priv, MT753X_PMCR_P(dp->index), + PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100); return 0; } @@ -2948,10 +3025,17 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; + u32 eeecr; + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE; - /* This switch only supports full-duplex at 1Gbps */ - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000FD; + config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD; + + eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port)); + /* tx_lpi_timer should be in microseconds. The time units for + * LPI threshold are unspecified. + */ + config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr); priv->info->mac_port_get_caps(ds, port, config); } @@ -2968,7 +3052,7 @@ static int mt753x_pcs_validate(struct phylink_pcs *pcs, return 0; } -static void mt7530_pcs_get_state(struct phylink_pcs *pcs, +static void mt7530_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, struct phylink_link_state *state) { struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; @@ -3026,17 +3110,9 @@ static int mt753x_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - int i, ret; - - /* Initialise the PCS devices */ - for (i = 0; i < priv->ds->num_ports; i++) { - priv->pcs[i].pcs.ops = priv->info->pcs_ops; - priv->pcs[i].pcs.neg_mode = true; - priv->pcs[i].priv = priv; - priv->pcs[i].port = i; - } + int ret = priv->info->sw_setup(ds); + int i; - ret = priv->info->sw_setup(ds); if (ret) return ret; @@ -3045,51 +3121,111 @@ mt753x_setup(struct dsa_switch *ds) return ret; ret = mt7530_setup_mdio(priv); - if (ret && priv->irq) - mt7530_free_irq_common(priv); + if (ret) + return ret; - if (priv->create_sgmii) { - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv)); - if (ret && priv->irq) - mt7530_free_irq(priv); + /* Initialise the PCS devices */ + for (i = 0; i < priv->ds->num_ports; i++) { + priv->pcs[i].pcs.ops = priv->info->pcs_ops; + priv->pcs[i].priv = priv; + priv->pcs[i].port = i; } + if (priv->create_sgmii) + ret = priv->create_sgmii(priv); + + if (ret && priv->irq_domain) + mt7530_free_mdio_irq(priv); + return ret; } -static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) +static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_keee *e) +{ + if (e->tx_lpi_timer > 0xFFF) + return -EINVAL; + + return 0; +} + +static void +mt753x_conduit_state_change(struct dsa_switch *ds, + const struct net_device *conduit, + bool operational) { + struct dsa_port *cpu_dp = conduit->dsa_ptr; struct mt7530_priv *priv = ds->priv; - u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); + int val = 0; + u8 mask; - e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); - e->tx_lpi_timer = GET_LPI_THRESH(eeecr); + /* Set the CPU port to trap frames to for MT7530. Trapped frames will be + * forwarded to the numerically smallest CPU port whose conduit + * interface is up. + */ + if (priv->id != ID_MT7530 && priv->id != ID_MT7621) + return; - return 0; + mask = BIT(cpu_dp->index); + + if (operational) + priv->active_cpu_ports |= mask; + else + priv->active_cpu_ports &= ~mask; + + if (priv->active_cpu_ports) { + val = MT7530_CPU_EN | + MT7530_CPU_PORT(__ffs(priv->active_cpu_ports)); + } + + mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val); } -static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) +static int mt753x_tc_setup_qdisc_tbf(struct dsa_switch *ds, int port, + struct tc_tbf_qopt_offload *qopt) { + struct tc_tbf_qopt_offload_replace_params *p = &qopt->replace_params; struct mt7530_priv *priv = ds->priv; - u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; + u32 rate = 0; - if (e->tx_lpi_timer > 0xFFF) - return -EINVAL; + switch (qopt->command) { + case TC_TBF_REPLACE: + rate = div_u64(p->rate.rate_bytes_ps, 1000) << 3; /* kbps */ + fallthrough; + case TC_TBF_DESTROY: { + u32 val, tick; - set = SET_LPI_THRESH(e->tx_lpi_timer); - if (!e->tx_lpi_enabled) - /* Force LPI Mode without a delay */ - set |= LPI_MODE_EN; - mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set); + mt7530_rmw(priv, MT753X_GERLCR, EGR_BC_MASK, + EGR_BC_CRC_IPG_PREAMBLE); + + /* if rate is greater than 10Mbps tick is 1/32 ms, + * 1ms otherwise + */ + tick = rate > 10000 ? 2 : 7; + val = FIELD_PREP(ERLCR_CIR_MASK, (rate >> 5)) | + FIELD_PREP(ERLCR_EN_MASK, !!rate) | + FIELD_PREP(ERLCR_EXP_MASK, tick) | + ERLCR_TBF_MODE_MASK | + FIELD_PREP(ERLCR_MANT_MASK, 0xf); + mt7530_write(priv, MT753X_ERLCR_P(port), val); + break; + } + default: + return -EOPNOTSUPP; + } return 0; } -static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) +static int mt753x_setup_tc(struct dsa_switch *ds, int port, + enum tc_setup_type type, void *type_data) { - return 0; + switch (type) { + case TC_SETUP_QDISC_TBF: + return mt753x_tc_setup_qdisc_tbf(ds, port, type_data); + default: + return -EOPNOTSUPP; + } } static int mt7988_setup(struct dsa_switch *ds) @@ -3102,19 +3238,33 @@ static int mt7988_setup(struct dsa_switch *ds) reset_control_deassert(priv->rstc); usleep_range(20, 50); + /* AN7583 require additional tweak to CONN_CFG */ + if (priv->id == ID_AN7583) + mt7530_rmw(priv, AN7583_GEPHY_CONN_CFG, + AN7583_CSR_DPHY_CKIN_SEL | + AN7583_CSR_PHY_CORE_REG_CLK_SEL | + AN7583_CSR_ETHER_AFE_PWD, + AN7583_CSR_DPHY_CKIN_SEL | + AN7583_CSR_PHY_CORE_REG_CLK_SEL | + FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0)); + /* Reset the switch PHYs */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST); return mt7531_setup_common(ds); } -const struct dsa_switch_ops mt7530_switch_ops = { +static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, .preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port, .get_strings = mt7530_get_strings, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, + .get_eth_mac_stats = mt7530_get_eth_mac_stats, + .get_rmon_stats = mt7530_get_rmon_stats, + .get_eth_ctrl_stats = mt7530_get_eth_ctrl_stats, + .get_stats64 = mt7530_get_stats64, .set_ageing_time = mt7530_set_ageing_time, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, @@ -3136,14 +3286,22 @@ const struct dsa_switch_ops mt7530_switch_ops = { .port_mirror_add = mt753x_port_mirror_add, .port_mirror_del = mt753x_port_mirror_del, .phylink_get_caps = mt753x_phylink_get_caps, - .phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs, - .phylink_mac_config = mt753x_phylink_mac_config, - .phylink_mac_link_down = mt753x_phylink_mac_link_down, - .phylink_mac_link_up = mt753x_phylink_mac_link_up, - .get_mac_eee = mt753x_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = mt753x_set_mac_eee, + .conduit_state_change = mt753x_conduit_state_change, + .port_setup_tc = mt753x_setup_tc, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, +}; + +static const struct phylink_mac_ops mt753x_phylink_mac_ops = { + .mac_select_pcs = mt753x_phylink_mac_select_pcs, + .mac_config = mt753x_phylink_mac_config, + .mac_link_down = mt753x_phylink_mac_link_down, + .mac_link_up = mt753x_phylink_mac_link_up, + .mac_disable_tx_lpi = mt753x_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = mt753x_phylink_mac_enable_tx_lpi, }; -EXPORT_SYMBOL_GPL(mt7530_switch_ops); const struct mt753x_info mt753x_table[] = { [ID_MT7621] = { @@ -3154,7 +3312,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3166,7 +3323,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7530_phy_write_c22, .phy_read_c45 = mt7530_phy_read_c45, .phy_write_c45 = mt7530_phy_write_c45, - .pad_setup = mt7530_pad_clk_setup, .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, @@ -3178,8 +3334,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7531_pad_setup, - .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, @@ -3191,10 +3345,27 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .pad_setup = mt7988_pad_setup, - .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, - .mac_port_config = mt7988_mac_config, + }, + [ID_EN7581] = { + .id = ID_EN7581, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7988_setup, + .phy_read_c22 = mt7531_ind_c22_phy_read, + .phy_write_c22 = mt7531_ind_c22_phy_write, + .phy_read_c45 = mt7531_ind_c45_phy_read, + .phy_write_c45 = mt7531_ind_c45_phy_write, + .mac_port_get_caps = en7581_mac_port_get_caps, + }, + [ID_AN7583] = { + .id = ID_AN7583, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7988_setup, + .phy_read_c22 = mt7531_ind_c22_phy_read, + .phy_write_c22 = mt7531_ind_c22_phy_write, + .phy_read_c45 = mt7531_ind_c45_phy_read, + .phy_write_c45 = mt7531_ind_c45_phy_write, + .mac_port_get_caps = en7581_mac_port_get_caps, }, }; EXPORT_SYMBOL_GPL(mt753x_table); @@ -3218,19 +3389,11 @@ mt7530_probe_common(struct mt7530_priv *priv) if (!priv->info) return -EINVAL; - /* Sanity check if these required device operations are filled - * properly. - */ - if (!priv->info->sw_setup || !priv->info->pad_setup || - !priv->info->phy_read_c22 || !priv->info->phy_write_c22 || - !priv->info->mac_port_get_caps || - !priv->info->mac_port_config) - return -EINVAL; - priv->id = priv->info->id; priv->dev = dev; priv->ds->priv = priv; priv->ds->ops = &mt7530_switch_ops; + priv->ds->phylink_mac_ops = &mt753x_phylink_mac_ops; mutex_init(&priv->reg_mutex); dev_set_drvdata(dev, priv); @@ -3241,8 +3404,8 @@ EXPORT_SYMBOL_GPL(mt7530_probe_common); void mt7530_remove_common(struct mt7530_priv *priv) { - if (priv->irq) - mt7530_free_irq(priv); + if (priv->irq_domain) + mt7530_free_mdio_irq(priv); dsa_unregister_switch(priv->ds); diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 17e42d30fff4..3e0090bed298 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -19,6 +19,8 @@ enum mt753x_id { ID_MT7621 = 1, ID_MT7531 = 2, ID_MT7988 = 3, + ID_EN7581 = 4, + ID_AN7583 = 5, }; #define NUM_TRGMII_CTRL 5 @@ -32,54 +34,110 @@ enum mt753x_id { #define SYSC_REG_RSTCTRL 0x34 #define RESET_MCM BIT(2) -/* Registers to mac forward control for unknown frames */ -#define MT7530_MFC 0x10 -#define BC_FFP(x) (((x) & 0xff) << 24) -#define BC_FFP_MASK BC_FFP(~0) -#define UNM_FFP(x) (((x) & 0xff) << 16) -#define UNM_FFP_MASK UNM_FFP(~0) -#define UNU_FFP(x) (((x) & 0xff) << 8) -#define UNU_FFP_MASK UNU_FFP(~0) -#define CPU_EN BIT(7) -#define CPU_PORT(x) ((x) << 4) -#define CPU_MASK (0xf << 4) -#define MIRROR_EN BIT(3) -#define MIRROR_PORT(x) ((x) & 0x7) -#define MIRROR_MASK 0x7 - -/* Registers for CPU forward control */ +/* Register for ARL global control */ +#define MT753X_AGC 0xc +#define LOCAL_EN BIT(7) + +/* Register for MAC forward control */ +#define MT753X_MFC 0x10 +#define BC_FFP_MASK GENMASK(31, 24) +#define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x) +#define UNM_FFP_MASK GENMASK(23, 16) +#define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x) +#define UNU_FFP_MASK GENMASK(15, 8) +#define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x) +#define MT7530_CPU_EN BIT(7) +#define MT7530_CPU_PORT_MASK GENMASK(6, 4) +#define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x) +#define MT7530_MIRROR_EN BIT(3) +#define MT7530_MIRROR_PORT_MASK GENMASK(2, 0) +#define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x) +#define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x) +#define MT7531_QRY_FFP_MASK GENMASK(7, 0) +#define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x) + +/* Register for CPU forward control */ #define MT7531_CFC 0x4 #define MT7531_MIRROR_EN BIT(19) -#define MT7531_MIRROR_MASK (MIRROR_MASK << 16) -#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) -#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) +#define MT7531_MIRROR_PORT_MASK GENMASK(18, 16) +#define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x) +#define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x) #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) -#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_CFC : MT7530_MFC) -#define MT753X_MIRROR_EN(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_MIRROR_EN : MIRROR_EN) -#define MT753X_MIRROR_MASK(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_MIRROR_MASK : MIRROR_MASK) - -/* Registers for BPDU and PAE frame control*/ +#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \ + id == ID_MT7988 || \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ + MT7531_CFC : MT753X_MFC) + +#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ + MT7531_MIRROR_EN : MT7530_MIRROR_EN) + +#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \ + id == ID_MT7988 || \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ + MT7531_MIRROR_PORT_MASK : \ + MT7530_MIRROR_PORT_MASK) + +#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \ + id == ID_MT7988 || \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ + MT7531_MIRROR_PORT_GET(val) : \ + MT7530_MIRROR_PORT_GET(val)) + +#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \ + id == ID_MT7988 || \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ + MT7531_MIRROR_PORT_SET(val) : \ + MT7530_MIRROR_PORT_SET(val)) + +/* Register for BPDU and PAE frame control */ #define MT753X_BPC 0x24 -#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0) -#define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16) -#define MT753X_PAE_PORT_FW(x) FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x) - -/* Register for :03 and :0E MAC DA frame control */ +#define PAE_BPDU_FR BIT(25) +#define PAE_EG_TAG_MASK GENMASK(24, 22) +#define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x) +#define PAE_PORT_FW_MASK GENMASK(18, 16) +#define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x) +#define BPDU_EG_TAG_MASK GENMASK(8, 6) +#define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x) +#define BPDU_PORT_FW_MASK GENMASK(2, 0) + +/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */ +#define MT753X_RGAC1 0x28 +#define R02_BPDU_FR BIT(25) +#define R02_EG_TAG_MASK GENMASK(24, 22) +#define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x) +#define R02_PORT_FW_MASK GENMASK(18, 16) +#define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x) +#define R01_BPDU_FR BIT(9) +#define R01_EG_TAG_MASK GENMASK(8, 6) +#define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x) +#define R01_PORT_FW_MASK GENMASK(2, 0) + +/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */ #define MT753X_RGAC2 0x2c -#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16) -#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x) - -enum mt753x_bpdu_port_fw { - MT753X_BPDU_FOLLOW_MFC, - MT753X_BPDU_CPU_EXCLUDE = 4, - MT753X_BPDU_CPU_INCLUDE = 5, - MT753X_BPDU_CPU_ONLY = 6, - MT753X_BPDU_DROP = 7, +#define R0E_BPDU_FR BIT(25) +#define R0E_EG_TAG_MASK GENMASK(24, 22) +#define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x) +#define R0E_PORT_FW_MASK GENMASK(18, 16) +#define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x) +#define R03_BPDU_FR BIT(9) +#define R03_EG_TAG_MASK GENMASK(8, 6) +#define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x) +#define R03_PORT_FW_MASK GENMASK(2, 0) + +enum mt753x_to_cpu_fw { + TO_CPU_FW_SYSTEM_DEFAULT, + TO_CPU_FW_CPU_EXCLUDE = 4, + TO_CPU_FW_CPU_INCLUDE = 5, + TO_CPU_FW_CPU_ONLY = 6, + TO_CPU_FW_DROP = 7, }; /* Registers for address table access */ @@ -195,6 +253,18 @@ enum mt7530_vlan_egress_attr { #define AGE_UNIT_MAX 0xfff #define AGE_UNIT(x) (AGE_UNIT_MASK & (x)) +#define MT753X_ERLCR_P(x) (0x1040 + ((x) * 0x100)) +#define ERLCR_CIR_MASK GENMASK(31, 16) +#define ERLCR_EN_MASK BIT(15) +#define ERLCR_EXP_MASK GENMASK(11, 8) +#define ERLCR_TBF_MODE_MASK BIT(7) +#define ERLCR_MANT_MASK GENMASK(6, 0) + +#define MT753X_GERLCR 0x10e0 +#define EGR_BC_MASK GENMASK(7, 0) +#define EGR_BC_CRC 0x4 /* crc */ +#define EGR_BC_CRC_IPG_PREAMBLE 0x18 /* crc + ipg + preamble */ + /* Register for port STP state control */ #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100)) #define FID_PST(fid, state) (((state) & 0x3) << ((fid) * 2)) @@ -253,6 +323,7 @@ enum mt7530_port_mode { enum mt7530_vlan_port_eg_tag { MT7530_VLAN_EG_DISABLED = 0, MT7530_VLAN_EG_CONSISTENT = 1, + MT7530_VLAN_EG_UNTAGGED = 4, }; enum mt7530_vlan_port_attr { @@ -275,57 +346,59 @@ enum mt7530_vlan_port_acc_frm { #define G0_PORT_VID_DEF G0_PORT_VID(0) /* Register for port MAC control register */ -#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100)) -#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18) +#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100)) +#define PMCR_IFG_XMIT_MASK GENMASK(19, 18) +#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x) #define PMCR_EXT_PHY BIT(17) #define PMCR_MAC_MODE BIT(16) -#define PMCR_FORCE_MODE BIT(15) -#define PMCR_TX_EN BIT(14) -#define PMCR_RX_EN BIT(13) +#define MT7530_FORCE_MODE BIT(15) +#define PMCR_MAC_TX_EN BIT(14) +#define PMCR_MAC_RX_EN BIT(13) #define PMCR_BACKOFF_EN BIT(9) #define PMCR_BACKPR_EN BIT(8) #define PMCR_FORCE_EEE1G BIT(7) #define PMCR_FORCE_EEE100 BIT(6) -#define PMCR_TX_FC_EN BIT(5) -#define PMCR_RX_FC_EN BIT(4) +#define PMCR_FORCE_RX_FC_EN BIT(5) +#define PMCR_FORCE_TX_FC_EN BIT(4) #define PMCR_FORCE_SPEED_1000 BIT(3) #define PMCR_FORCE_SPEED_100 BIT(2) #define PMCR_FORCE_FDX BIT(1) #define PMCR_FORCE_LNK BIT(0) -#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ - PMCR_FORCE_SPEED_1000) -#define MT7531_FORCE_LNK BIT(31) -#define MT7531_FORCE_SPD BIT(30) -#define MT7531_FORCE_DPX BIT(29) -#define MT7531_FORCE_RX_FC BIT(28) -#define MT7531_FORCE_TX_FC BIT(27) -#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \ - MT7531_FORCE_SPD | \ - MT7531_FORCE_DPX | \ - MT7531_FORCE_RX_FC | \ - MT7531_FORCE_TX_FC) -#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_FORCE_MODE : PMCR_FORCE_MODE) -#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ - PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ - PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ - PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) -#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ - PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ - PMCR_TX_EN | PMCR_RX_EN | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ +#define MT7531_FORCE_MODE_LNK BIT(31) +#define MT7531_FORCE_MODE_SPD BIT(30) +#define MT7531_FORCE_MODE_DPX BIT(29) +#define MT7531_FORCE_MODE_RX_FC BIT(28) +#define MT7531_FORCE_MODE_TX_FC BIT(27) +#define MT7531_FORCE_MODE_EEE100 BIT(26) +#define MT7531_FORCE_MODE_EEE1G BIT(25) +#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \ + MT7531_FORCE_MODE_SPD | \ + MT7531_FORCE_MODE_DPX | \ + MT7531_FORCE_MODE_RX_FC | \ + MT7531_FORCE_MODE_TX_FC | \ + MT7531_FORCE_MODE_EEE100 | \ + MT7531_FORCE_MODE_EEE1G) +#define MT753X_FORCE_MODE(id) ((id == ID_MT7531 || \ + id == ID_MT7988) ? \ + MT7531_FORCE_MODE_MASK : \ + MT7530_FORCE_MODE) +#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \ + PMCR_FORCE_EEE1G | \ + PMCR_FORCE_EEE100 | \ + PMCR_FORCE_RX_FC_EN | \ + PMCR_FORCE_TX_FC_EN | \ PMCR_FORCE_SPEED_1000 | \ + PMCR_FORCE_SPEED_100 | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK) -#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) -#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) -#define WAKEUP_TIME_100(x) (((x) & 0xFF) << 16) +#define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100) +#define WAKEUP_TIME_1000_MASK GENMASK(31, 24) +#define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x) +#define WAKEUP_TIME_100_MASK GENMASK(23, 16) +#define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x) #define LPI_THRESH_MASK GENMASK(15, 4) -#define LPI_THRESH_SHT 4 -#define SET_LPI_THRESH(x) (((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK) -#define GET_LPI_THRESH(x) (((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT) +#define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x) +#define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x) #define LPI_MODE_EN BIT(0) #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) @@ -355,6 +428,48 @@ enum mt7530_vlan_port_acc_frm { /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) +/* Each define is an offset of MT7530_PORT_MIB_COUNTER */ +#define MT7530_PORT_MIB_TX_DROP 0x00 +#define MT7530_PORT_MIB_TX_CRC_ERR 0x04 +#define MT7530_PORT_MIB_TX_UNICAST 0x08 +#define MT7530_PORT_MIB_TX_MULTICAST 0x0c +#define MT7530_PORT_MIB_TX_BROADCAST 0x10 +#define MT7530_PORT_MIB_TX_COLLISION 0x14 +#define MT7530_PORT_MIB_TX_SINGLE_COLLISION 0x18 +#define MT7530_PORT_MIB_TX_MULTIPLE_COLLISION 0x1c +#define MT7530_PORT_MIB_TX_DEFERRED 0x20 +#define MT7530_PORT_MIB_TX_LATE_COLLISION 0x24 +#define MT7530_PORT_MIB_TX_EXCESSIVE_COLLISION 0x28 +#define MT7530_PORT_MIB_TX_PAUSE 0x2c +#define MT7530_PORT_MIB_TX_PKT_SZ_64 0x30 +#define MT7530_PORT_MIB_TX_PKT_SZ_65_TO_127 0x34 +#define MT7530_PORT_MIB_TX_PKT_SZ_128_TO_255 0x38 +#define MT7530_PORT_MIB_TX_PKT_SZ_256_TO_511 0x3c +#define MT7530_PORT_MIB_TX_PKT_SZ_512_TO_1023 0x40 +#define MT7530_PORT_MIB_TX_PKT_SZ_1024_TO_MAX 0x44 +#define MT7530_PORT_MIB_TX_BYTES 0x48 /* 64 bytes */ +#define MT7530_PORT_MIB_RX_DROP 0x60 +#define MT7530_PORT_MIB_RX_FILTERING 0x64 +#define MT7530_PORT_MIB_RX_UNICAST 0x68 +#define MT7530_PORT_MIB_RX_MULTICAST 0x6c +#define MT7530_PORT_MIB_RX_BROADCAST 0x70 +#define MT7530_PORT_MIB_RX_ALIGN_ERR 0x74 +#define MT7530_PORT_MIB_RX_CRC_ERR 0x78 +#define MT7530_PORT_MIB_RX_UNDER_SIZE_ERR 0x7c +#define MT7530_PORT_MIB_RX_FRAG_ERR 0x80 +#define MT7530_PORT_MIB_RX_OVER_SZ_ERR 0x84 +#define MT7530_PORT_MIB_RX_JABBER_ERR 0x88 +#define MT7530_PORT_MIB_RX_PAUSE 0x8c +#define MT7530_PORT_MIB_RX_PKT_SZ_64 0x90 +#define MT7530_PORT_MIB_RX_PKT_SZ_65_TO_127 0x94 +#define MT7530_PORT_MIB_RX_PKT_SZ_128_TO_255 0x98 +#define MT7530_PORT_MIB_RX_PKT_SZ_256_TO_511 0x9c +#define MT7530_PORT_MIB_RX_PKT_SZ_512_TO_1023 0xa0 +#define MT7530_PORT_MIB_RX_PKT_SZ_1024_TO_MAX 0xa4 +#define MT7530_PORT_MIB_RX_BYTES 0xa8 /* 64 bytes */ +#define MT7530_PORT_MIB_RX_CTRL_DROP 0xb0 +#define MT7530_PORT_MIB_RX_INGRESS_DROP 0xb4 +#define MT7530_PORT_MIB_RX_ARL_DROP 0xb8 #define MT7530_MIB_CCR 0x4fe0 #define CCR_MIB_ENABLE BIT(31) #define CCR_RX_OCT_CNT_GOOD BIT(7) @@ -450,32 +565,30 @@ enum mt7531_clk_skew { MT7531_CLK_SKEW_REVERSE = 3, }; -/* Register for hw trap status */ -#define MT7530_HWTRAP 0x7800 -#define HWTRAP_XTAL_MASK (BIT(10) | BIT(9)) -#define HWTRAP_XTAL_25MHZ (BIT(10) | BIT(9)) -#define HWTRAP_XTAL_40MHZ (BIT(10)) -#define HWTRAP_XTAL_20MHZ (BIT(9)) - -#define MT7531_HWTRAP 0x7800 -#define HWTRAP_XTAL_FSEL_MASK BIT(7) -#define HWTRAP_XTAL_FSEL_25MHZ BIT(7) -#define HWTRAP_XTAL_FSEL_40MHZ 0 -/* Unique fields of (M)HWSTRAP for MT7531 */ -#define XTAL_FSEL_S 7 -#define XTAL_FSEL_M BIT(7) -#define PHY_EN BIT(6) -#define CHG_STRAP BIT(8) - -/* Register for hw trap modification */ -#define MT7530_MHWTRAP 0x7804 -#define MHWTRAP_PHY0_SEL BIT(20) -#define MHWTRAP_MANUAL BIT(16) -#define MHWTRAP_P5_MAC_SEL BIT(13) -#define MHWTRAP_P6_DIS BIT(8) -#define MHWTRAP_P5_RGMII_MODE BIT(7) -#define MHWTRAP_P5_DIS BIT(6) -#define MHWTRAP_PHY_ACCESS BIT(5) +/* Register for trap status */ +#define MT753X_TRAP 0x7800 +#define MT7530_XTAL_MASK (BIT(10) | BIT(9)) +#define MT7530_XTAL_25MHZ (BIT(10) | BIT(9)) +#define MT7530_XTAL_40MHZ BIT(10) +#define MT7530_XTAL_20MHZ BIT(9) +#define MT7531_XTAL25 BIT(7) + +/* Register for trap modification */ +#define MT753X_MTRAP 0x7804 +#define MT7530_P5_PHY0_SEL BIT(20) +#define MT7530_CHG_TRAP BIT(16) +#define MT7530_P5_MAC_SEL BIT(13) +#define MT7530_P6_DIS BIT(8) +#define MT7530_P5_RGMII_MODE BIT(7) +#define MT7530_P5_DIS BIT(6) +#define MT7530_PHY_INDIRECT_ACCESS BIT(5) +#define MT7531_CHG_STRAP BIT(8) +#define MT7531_PHY_EN BIT(6) + +enum mt7531_xtal_fsel { + MT7531_XTAL_FSEL_25MHZ, + MT7531_XTAL_FSEL_40MHZ, +}; /* Register for TOP signal control */ #define MT7530_TOP_SIG_CTRL 0x7808 @@ -561,6 +674,15 @@ enum mt7531_clk_skew { #define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) #define MT7531_EXT_P_MDIO_12 (2 << 16) +#define MT753X_CPORT_SPTAG_CFG 0x7c10 +#define CPORT_SW2FE_STAG_EN BIT(1) +#define CPORT_FE2SW_STAG_EN BIT(0) + +#define AN7583_GEPHY_CONN_CFG 0x7c14 +#define AN7583_CSR_DPHY_CKIN_SEL BIT(31) +#define AN7583_CSR_PHY_CORE_REG_CLK_SEL BIT(30) +#define AN7583_CSR_ETHER_AFE_PWD GENMASK(28, 24) + /* Registers for LED GPIO control (MT7530 only) * All registers follow this pattern: * [ 2: 0] port 0 @@ -605,10 +727,11 @@ enum mt7531_clk_skew { #define RG_SYSPLL_DDSFBK_EN BIT(12) #define RG_SYSPLL_BIAS_EN BIT(11) #define RG_SYSPLL_BIAS_LPF_EN BIT(10) +#define MT7531_RG_SYSPLL_DMY2 BIT(6) #define MT7531_PHY_PLL_OFF BIT(5) #define MT7531_PHY_PLL_BYPASS_MODE BIT(4) -#define MT753X_CTRL_PHY_ADDR 0 +#define MT753X_CTRL_PHY_ADDR(addr) ((addr + 1) & 0x1f) #define CORE_PLL_GROUP5 0x404 #define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff) @@ -676,18 +799,17 @@ struct mt7530_fdb { */ struct mt7530_port { bool enable; + bool isolated; u32 pm; u16 pvid; struct phylink_pcs *sgmii_pcs; }; -/* Port 5 interface select definitions */ -enum p5_interface_select { - P5_DISABLED = 0, - P5_INTF_SEL_PHY_P0, - P5_INTF_SEL_PHY_P4, - P5_INTF_SEL_GMAC5, - P5_INTF_SEL_GMAC5_SGMII, +/* Port 5 mode definitions of the MT7530 switch */ +enum mt7530_p5_mode { + GMAC5, + MUX_PHY_P0, + MUX_PHY_P4, }; struct mt7530_priv; @@ -700,17 +822,14 @@ struct mt753x_pcs { /* struct mt753x_info - This is the main data structure for holding the specific * part for each supported device + * @id: Holding the identifier to a switch model + * @pcs_ops: Holding the pointer to the MAC PCS operations structure * @sw_setup: Holding the handler to a device initialization * @phy_read_c22: Holding the way reading PHY port using C22 * @phy_write_c22: Holding the way writing PHY port using C22 * @phy_read_c45: Holding the way reading PHY port using C45 * @phy_write_c45: Holding the way writing PHY port using C45 - * @pad_setup: Holding the way setting up the bus pad for a certain - * MAC port - * @phy_mode_supported: Check if the PHY type is being supported on a certain - * port - * @mac_port_validate: Holding the way to set addition validate type for a - * certan MAC port + * @mac_port_get_caps: Holding the handler that provides MAC capabilities * @mac_port_config: Holding the way setting up the PHY attribute to a * certain MAC port */ @@ -727,16 +846,11 @@ struct mt753x_info { int regnum); int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad, int regnum, u16 val); - int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); - int (*cpu_port_config)(struct dsa_switch *ds, int port); void (*mac_port_get_caps)(struct dsa_switch *ds, int port, struct phylink_config *config); - void (*mac_port_validate)(struct dsa_switch *ds, int port, - phy_interface_t interface, - unsigned long *supported); - int (*mac_port_config)(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface); + void (*mac_port_config)(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface); }; /* struct mt7530_priv - This is the main data structure for holding the state @@ -754,12 +868,13 @@ struct mt753x_info { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers - * @p6_interface Holding the current port 6 interface - * @p5_intf_sel: Holding the current port 5 interface select - * @irq: IRQ number of the switch + * @p5_mode: Holding the current mode of port 5 of the MT7530 switch + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch + * has got SGMII * @irq_domain: IRQ domain of the switch irq_chip - * @irq_enable: IRQ enable bits, synced to SYS_INT_EN * @create_sgmii: Pointer to function creating SGMII PCS instance(s) + * @active_cpu_ports: Holding the active CPU ports + * @mdiodev: The pointer to the MDIO device structure */ struct mt7530_priv { struct device *dev; @@ -773,19 +888,18 @@ struct mt7530_priv { const struct mt753x_info *info; unsigned int id; bool mcm; - phy_interface_t p6_interface; - phy_interface_t p5_interface; - unsigned int p5_intf_sel; + enum mt7530_p5_mode p5_mode; + bool p5_sgmii; u8 mirror_rx; u8 mirror_tx; struct mt7530_port ports[MT7530_NUM_PORTS]; struct mt753x_pcs pcs[MT7530_NUM_PORTS]; /* protect among processes for registers access*/ struct mutex reg_mutex; - int irq; struct irq_domain *irq_domain; - u32 irq_enable; - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); + int (*create_sgmii)(struct mt7530_priv *priv); + u8 active_cpu_ports; + struct mdio_device *mdiodev; }; struct mt7530_hw_vlan_entry { @@ -825,7 +939,6 @@ static inline void INIT_MT7530_DUMMY_POLL(struct mt7530_dummy_poll *p, int mt7530_probe_common(struct mt7530_priv *priv); void mt7530_remove_common(struct mt7530_priv *priv); -extern const struct dsa_switch_ops mt7530_switch_ops; extern const struct mt753x_info mt753x_table[]; #endif /* __MT7530_H */ diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 294312b58e4f..9c8ac14cd4f5 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -297,6 +297,8 @@ static const struct dsa_switch_ops mv88e6060_switch_ops = { .phy_read = mv88e6060_phy_read, .phy_write = mv88e6060_phy_write, .phylink_get_caps = mv88e6060_phylink_get_caps, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int mv88e6060_probe(struct mdio_device *mdiodev) diff --git a/drivers/net/dsa/mv88e6xxx/Kconfig b/drivers/net/dsa/mv88e6xxx/Kconfig index e3181d5471df..64ae3882d17c 100644 --- a/drivers/net/dsa/mv88e6xxx/Kconfig +++ b/drivers/net/dsa/mv88e6xxx/Kconfig @@ -17,3 +17,13 @@ config NET_DSA_MV88E6XXX_PTP help Say Y to enable PTP hardware timestamping on Marvell 88E6xxx switch chips that support it. + +config NET_DSA_MV88E6XXX_LEDS + bool "LED support for Marvell 88E6xxx" + default y + depends on NET_DSA_MV88E6XXX + depends on LEDS_CLASS=y || LEDS_CLASS=NET_DSA_MV88E6XXX + depends on LEDS_TRIGGERS + help + This enabled support for controlling the LEDs attached to the + Marvell 88E6xxx switch chips. diff --git a/drivers/net/dsa/mv88e6xxx/Makefile b/drivers/net/dsa/mv88e6xxx/Makefile index a9a9651187db..dd961081d631 100644 --- a/drivers/net/dsa/mv88e6xxx/Makefile +++ b/drivers/net/dsa/mv88e6xxx/Makefile @@ -9,6 +9,7 @@ mv88e6xxx-objs += global2.o mv88e6xxx-objs += global2_avb.o mv88e6xxx-objs += global2_scratch.o mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_PTP) += hwtstamp.o +mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_LEDS) += leds.o mv88e6xxx-objs += pcs-6185.o mv88e6xxx-objs += pcs-6352.o mv88e6xxx-objs += pcs-639x.o diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 52a99d8bada0..b4d48997bf46 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -27,6 +27,7 @@ #include <linux/of_irq.h> #include <linux/of_mdio.h> #include <linux/platform_data/mv88e6xxx.h> +#include <linux/property.h> #include <linux/netdevice.h> #include <linux/gpio/consumer.h> #include <linux/phylink.h> @@ -131,8 +132,8 @@ struct mii_bus *mv88e6xxx_default_mdio_bus(struct mv88e6xxx_chip *chip) { struct mv88e6xxx_mdio_bus *mdio_bus; - mdio_bus = list_first_entry(&chip->mdios, struct mv88e6xxx_mdio_bus, - list); + mdio_bus = list_first_entry_or_null(&chip->mdios, + struct mv88e6xxx_mdio_bus, list); if (!mdio_bus) return NULL; @@ -296,7 +297,7 @@ static int mv88e6xxx_g1_irq_setup_common(struct mv88e6xxx_chip *chip) u16 reg, mask; chip->g1_irq.nirqs = chip->info->g1_irqs; - chip->g1_irq.domain = irq_domain_add_simple( + chip->g1_irq.domain = irq_domain_create_simple( NULL, chip->g1_irq.nirqs, 0, &mv88e6xxx_g1_irq_domain_ops, chip); if (!chip->g1_irq.domain) @@ -393,7 +394,7 @@ static int mv88e6xxx_irq_poll_setup(struct mv88e6xxx_chip *chip) kthread_init_delayed_work(&chip->irq_poll_work, mv88e6xxx_irq_poll); - chip->kworker = kthread_create_worker(0, "%s", dev_name(chip->dev)); + chip->kworker = kthread_run_worker(0, "%s", dev_name(chip->dev)); if (IS_ERR(chip->kworker)) return PTR_ERR(chip->kworker); @@ -566,23 +567,83 @@ static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported) phy_interface_set_rgmii(supported); } +static void +mv88e6250_setup_supported_interfaces(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + int err; + u16 reg; + + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); + if (err) { + dev_err(chip->dev, "p%d: failed to read port status\n", port); + return; + } + + switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) { + case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY: + __set_bit(PHY_INTERFACE_MODE_REVMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_HALF: + case MV88E6250_PORT_STS_PORTMODE_MII_FULL: + __set_bit(PHY_INTERFACE_MODE_MII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY: + __set_bit(PHY_INTERFACE_MODE_REVRMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL: + case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL: + __set_bit(PHY_INTERFACE_MODE_RMII, supported); + break; + + case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII: + __set_bit(PHY_INTERFACE_MODE_RGMII, supported); + break; + + default: + dev_err(chip->dev, + "p%d: invalid port mode in status register: %04x\n", + port, reg); + } +} + static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, struct phylink_config *config) { + if (!mv88e6xxx_phy_is_internal(chip, port)) + mv88e6250_setup_supported_interfaces(chip, port, config); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; +} + +static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ unsigned long *supported = config->supported_interfaces; /* Translate the default cmode */ mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); - config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; } -static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) +static int mv88e63xx_get_port_serdes_cmode(struct mv88e6xxx_chip *chip, int port) { u16 reg, val; int err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, ®); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); if (err) return err; @@ -591,16 +652,16 @@ static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip) return 0xf; val = reg & ~MV88E6XXX_PORT_STS_PHY_DETECT; - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, val); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, val); if (err) return err; - err = mv88e6xxx_port_read(chip, 4, MV88E6XXX_PORT_STS, &val); + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val); if (err) return err; /* Restore PHY_DETECT value */ - err = mv88e6xxx_port_write(chip, 4, MV88E6XXX_PORT_STS, reg); + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_STS, reg); if (err) return err; @@ -628,7 +689,30 @@ static void mv88e6352_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, if (err <= 0) return; - cmode = mv88e6352_get_port4_serdes_cmode(chip); + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); + if (cmode < 0) + dev_err(chip->dev, "p%d: failed to read serdes cmode\n", + port); + else + mv88e6xxx_translate_cmode(cmode, supported); + } +} + +static void mv88e632x_phylink_get_caps(struct mv88e6xxx_chip *chip, int port, + struct phylink_config *config) +{ + unsigned long *supported = config->supported_interfaces; + int cmode; + + /* Translate the default cmode */ + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | + MAC_1000FD; + + /* Port 0/1 are serdes only ports */ + if (port == 0 || port == 1) { + cmode = mv88e63xx_get_port_serdes_cmode(chip, port); if (cmode < 0) dev_err(chip->dev, "p%d: failed to read serdes cmode\n", port); @@ -778,24 +862,27 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port, } } -static struct phylink_pcs *mv88e6xxx_mac_select_pcs(struct dsa_switch *ds, - int port, - phy_interface_t interface) +static struct phylink_pcs * +mv88e6xxx_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) { - struct mv88e6xxx_chip *chip = ds->priv; - struct phylink_pcs *pcs = ERR_PTR(-EOPNOTSUPP); + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; + struct phylink_pcs *pcs = NULL; if (chip->info->ops->pcs_ops) - pcs = chip->info->ops->pcs_ops->pcs_select(chip, port, + pcs = chip->info->ops->pcs_ops->pcs_select(chip, dp->index, interface); return pcs; } -static int mv88e6xxx_mac_prepare(struct dsa_switch *ds, int port, +static int mv88e6xxx_mac_prepare(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct mv88e6xxx_chip *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; + int port = dp->index; int err = 0; /* In inband mode, the link may come up at any time while the link @@ -814,11 +901,13 @@ static int mv88e6xxx_mac_prepare(struct dsa_switch *ds, int port, return err; } -static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, +static void mv88e6xxx_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct mv88e6xxx_chip *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; + int port = dp->index; int err = 0; mv88e6xxx_reg_lock(chip); @@ -834,13 +923,15 @@ err_unlock: mv88e6xxx_reg_unlock(chip); if (err && err != -EOPNOTSUPP) - dev_err(ds->dev, "p%d: failed to configure MAC/PCS\n", port); + dev_err(chip->dev, "p%d: failed to configure MAC/PCS\n", port); } -static int mv88e6xxx_mac_finish(struct dsa_switch *ds, int port, +static int mv88e6xxx_mac_finish(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct mv88e6xxx_chip *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; + int port = dp->index; int err = 0; /* Undo the forced down state above after completing configuration @@ -864,12 +955,14 @@ static int mv88e6xxx_mac_finish(struct dsa_switch *ds, int port, return err; } -static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, +static void mv88e6xxx_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct mv88e6xxx_chip *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; const struct mv88e6xxx_ops *ops; + int port = dp->index; int err = 0; ops = chip->info->ops; @@ -892,14 +985,16 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port, "p%d: failed to force MAC link down\n", port); } -static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, phy_interface_t interface, +static void mv88e6xxx_mac_link_up(struct phylink_config *config, struct phy_device *phydev, + unsigned int mode, phy_interface_t interface, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct mv88e6xxx_chip *chip = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mv88e6xxx_chip *chip = dp->ds->priv; const struct mv88e6xxx_ops *ops; + int port = dp->index; int err = 0; ops = chip->info->ops; @@ -925,82 +1020,100 @@ error: mv88e6xxx_reg_unlock(chip); if (err && err != -EOPNOTSUPP) - dev_err(ds->dev, + dev_err(chip->dev, "p%d: failed to configure MAC link up\n", port); } static int mv88e6xxx_stats_snapshot(struct mv88e6xxx_chip *chip, int port) { + int err; + if (!chip->info->ops->stats_snapshot) return -EOPNOTSUPP; - return chip->info->ops->stats_snapshot(chip, port); -} - -static struct mv88e6xxx_hw_stat mv88e6xxx_hw_stats[] = { - { "in_good_octets", 8, 0x00, STATS_TYPE_BANK0, }, - { "in_bad_octets", 4, 0x02, STATS_TYPE_BANK0, }, - { "in_unicast", 4, 0x04, STATS_TYPE_BANK0, }, - { "in_broadcasts", 4, 0x06, STATS_TYPE_BANK0, }, - { "in_multicasts", 4, 0x07, STATS_TYPE_BANK0, }, - { "in_pause", 4, 0x16, STATS_TYPE_BANK0, }, - { "in_undersize", 4, 0x18, STATS_TYPE_BANK0, }, - { "in_fragments", 4, 0x19, STATS_TYPE_BANK0, }, - { "in_oversize", 4, 0x1a, STATS_TYPE_BANK0, }, - { "in_jabber", 4, 0x1b, STATS_TYPE_BANK0, }, - { "in_rx_error", 4, 0x1c, STATS_TYPE_BANK0, }, - { "in_fcs_error", 4, 0x1d, STATS_TYPE_BANK0, }, - { "out_octets", 8, 0x0e, STATS_TYPE_BANK0, }, - { "out_unicast", 4, 0x10, STATS_TYPE_BANK0, }, - { "out_broadcasts", 4, 0x13, STATS_TYPE_BANK0, }, - { "out_multicasts", 4, 0x12, STATS_TYPE_BANK0, }, - { "out_pause", 4, 0x15, STATS_TYPE_BANK0, }, - { "excessive", 4, 0x11, STATS_TYPE_BANK0, }, - { "collisions", 4, 0x1e, STATS_TYPE_BANK0, }, - { "deferred", 4, 0x05, STATS_TYPE_BANK0, }, - { "single", 4, 0x14, STATS_TYPE_BANK0, }, - { "multiple", 4, 0x17, STATS_TYPE_BANK0, }, - { "out_fcs_error", 4, 0x03, STATS_TYPE_BANK0, }, - { "late", 4, 0x1f, STATS_TYPE_BANK0, }, - { "hist_64bytes", 4, 0x08, STATS_TYPE_BANK0, }, - { "hist_65_127bytes", 4, 0x09, STATS_TYPE_BANK0, }, - { "hist_128_255bytes", 4, 0x0a, STATS_TYPE_BANK0, }, - { "hist_256_511bytes", 4, 0x0b, STATS_TYPE_BANK0, }, - { "hist_512_1023bytes", 4, 0x0c, STATS_TYPE_BANK0, }, - { "hist_1024_max_bytes", 4, 0x0d, STATS_TYPE_BANK0, }, - { "sw_in_discards", 4, 0x10, STATS_TYPE_PORT, }, - { "sw_in_filtered", 2, 0x12, STATS_TYPE_PORT, }, - { "sw_out_filtered", 2, 0x13, STATS_TYPE_PORT, }, - { "in_discards", 4, 0x00, STATS_TYPE_BANK1, }, - { "in_filtered", 4, 0x01, STATS_TYPE_BANK1, }, - { "in_accepted", 4, 0x02, STATS_TYPE_BANK1, }, - { "in_bad_accepted", 4, 0x03, STATS_TYPE_BANK1, }, - { "in_good_avb_class_a", 4, 0x04, STATS_TYPE_BANK1, }, - { "in_good_avb_class_b", 4, 0x05, STATS_TYPE_BANK1, }, - { "in_bad_avb_class_a", 4, 0x06, STATS_TYPE_BANK1, }, - { "in_bad_avb_class_b", 4, 0x07, STATS_TYPE_BANK1, }, - { "tcam_counter_0", 4, 0x08, STATS_TYPE_BANK1, }, - { "tcam_counter_1", 4, 0x09, STATS_TYPE_BANK1, }, - { "tcam_counter_2", 4, 0x0a, STATS_TYPE_BANK1, }, - { "tcam_counter_3", 4, 0x0b, STATS_TYPE_BANK1, }, - { "in_da_unknown", 4, 0x0e, STATS_TYPE_BANK1, }, - { "in_management", 4, 0x0f, STATS_TYPE_BANK1, }, - { "out_queue_0", 4, 0x10, STATS_TYPE_BANK1, }, - { "out_queue_1", 4, 0x11, STATS_TYPE_BANK1, }, - { "out_queue_2", 4, 0x12, STATS_TYPE_BANK1, }, - { "out_queue_3", 4, 0x13, STATS_TYPE_BANK1, }, - { "out_queue_4", 4, 0x14, STATS_TYPE_BANK1, }, - { "out_queue_5", 4, 0x15, STATS_TYPE_BANK1, }, - { "out_queue_6", 4, 0x16, STATS_TYPE_BANK1, }, - { "out_queue_7", 4, 0x17, STATS_TYPE_BANK1, }, - { "out_cut_through", 4, 0x18, STATS_TYPE_BANK1, }, - { "out_octets_a", 4, 0x1a, STATS_TYPE_BANK1, }, - { "out_octets_b", 4, 0x1b, STATS_TYPE_BANK1, }, - { "out_management", 4, 0x1f, STATS_TYPE_BANK1, }, + mv88e6xxx_reg_lock(chip); + err = chip->info->ops->stats_snapshot(chip, port); + mv88e6xxx_reg_unlock(chip); + + return err; +} + +#define MV88E6XXX_HW_STAT_MAPPER(_fn) \ + _fn(in_good_octets, 8, 0x00, STATS_TYPE_BANK0), \ + _fn(in_bad_octets, 4, 0x02, STATS_TYPE_BANK0), \ + _fn(in_unicast, 4, 0x04, STATS_TYPE_BANK0), \ + _fn(in_broadcasts, 4, 0x06, STATS_TYPE_BANK0), \ + _fn(in_multicasts, 4, 0x07, STATS_TYPE_BANK0), \ + _fn(in_pause, 4, 0x16, STATS_TYPE_BANK0), \ + _fn(in_undersize, 4, 0x18, STATS_TYPE_BANK0), \ + _fn(in_fragments, 4, 0x19, STATS_TYPE_BANK0), \ + _fn(in_oversize, 4, 0x1a, STATS_TYPE_BANK0), \ + _fn(in_jabber, 4, 0x1b, STATS_TYPE_BANK0), \ + _fn(in_rx_error, 4, 0x1c, STATS_TYPE_BANK0), \ + _fn(in_fcs_error, 4, 0x1d, STATS_TYPE_BANK0), \ + _fn(out_octets, 8, 0x0e, STATS_TYPE_BANK0), \ + _fn(out_unicast, 4, 0x10, STATS_TYPE_BANK0), \ + _fn(out_broadcasts, 4, 0x13, STATS_TYPE_BANK0), \ + _fn(out_multicasts, 4, 0x12, STATS_TYPE_BANK0), \ + _fn(out_pause, 4, 0x15, STATS_TYPE_BANK0), \ + _fn(excessive, 4, 0x11, STATS_TYPE_BANK0), \ + _fn(collisions, 4, 0x1e, STATS_TYPE_BANK0), \ + _fn(deferred, 4, 0x05, STATS_TYPE_BANK0), \ + _fn(single, 4, 0x14, STATS_TYPE_BANK0), \ + _fn(multiple, 4, 0x17, STATS_TYPE_BANK0), \ + _fn(out_fcs_error, 4, 0x03, STATS_TYPE_BANK0), \ + _fn(late, 4, 0x1f, STATS_TYPE_BANK0), \ + _fn(hist_64bytes, 4, 0x08, STATS_TYPE_BANK0), \ + _fn(hist_65_127bytes, 4, 0x09, STATS_TYPE_BANK0), \ + _fn(hist_128_255bytes, 4, 0x0a, STATS_TYPE_BANK0), \ + _fn(hist_256_511bytes, 4, 0x0b, STATS_TYPE_BANK0), \ + _fn(hist_512_1023bytes, 4, 0x0c, STATS_TYPE_BANK0), \ + _fn(hist_1024_max_bytes, 4, 0x0d, STATS_TYPE_BANK0), \ + _fn(sw_in_discards, 4, 0x10, STATS_TYPE_PORT), \ + _fn(sw_in_filtered, 2, 0x12, STATS_TYPE_PORT), \ + _fn(sw_out_filtered, 2, 0x13, STATS_TYPE_PORT), \ + _fn(in_discards, 4, 0x00, STATS_TYPE_BANK1), \ + _fn(in_filtered, 4, 0x01, STATS_TYPE_BANK1), \ + _fn(in_accepted, 4, 0x02, STATS_TYPE_BANK1), \ + _fn(in_bad_accepted, 4, 0x03, STATS_TYPE_BANK1), \ + _fn(in_good_avb_class_a, 4, 0x04, STATS_TYPE_BANK1), \ + _fn(in_good_avb_class_b, 4, 0x05, STATS_TYPE_BANK1), \ + _fn(in_bad_avb_class_a, 4, 0x06, STATS_TYPE_BANK1), \ + _fn(in_bad_avb_class_b, 4, 0x07, STATS_TYPE_BANK1), \ + _fn(tcam_counter_0, 4, 0x08, STATS_TYPE_BANK1), \ + _fn(tcam_counter_1, 4, 0x09, STATS_TYPE_BANK1), \ + _fn(tcam_counter_2, 4, 0x0a, STATS_TYPE_BANK1), \ + _fn(tcam_counter_3, 4, 0x0b, STATS_TYPE_BANK1), \ + _fn(in_da_unknown, 4, 0x0e, STATS_TYPE_BANK1), \ + _fn(in_management, 4, 0x0f, STATS_TYPE_BANK1), \ + _fn(out_queue_0, 4, 0x10, STATS_TYPE_BANK1), \ + _fn(out_queue_1, 4, 0x11, STATS_TYPE_BANK1), \ + _fn(out_queue_2, 4, 0x12, STATS_TYPE_BANK1), \ + _fn(out_queue_3, 4, 0x13, STATS_TYPE_BANK1), \ + _fn(out_queue_4, 4, 0x14, STATS_TYPE_BANK1), \ + _fn(out_queue_5, 4, 0x15, STATS_TYPE_BANK1), \ + _fn(out_queue_6, 4, 0x16, STATS_TYPE_BANK1), \ + _fn(out_queue_7, 4, 0x17, STATS_TYPE_BANK1), \ + _fn(out_cut_through, 4, 0x18, STATS_TYPE_BANK1), \ + _fn(out_octets_a, 4, 0x1a, STATS_TYPE_BANK1), \ + _fn(out_octets_b, 4, 0x1b, STATS_TYPE_BANK1), \ + _fn(out_management, 4, 0x1f, STATS_TYPE_BANK1), \ + /* */ + +#define MV88E6XXX_HW_STAT_ENTRY(_string, _size, _reg, _type) \ + { #_string, _size, _reg, _type } +static const struct mv88e6xxx_hw_stat mv88e6xxx_hw_stats[] = { + MV88E6XXX_HW_STAT_MAPPER(MV88E6XXX_HW_STAT_ENTRY) +}; + +#define MV88E6XXX_HW_STAT_ENUM(_string, _size, _reg, _type) \ + MV88E6XXX_HW_STAT_ID_ ## _string +enum mv88e6xxx_hw_stat_id { + MV88E6XXX_HW_STAT_MAPPER(MV88E6XXX_HW_STAT_ENUM) }; static uint64_t _mv88e6xxx_get_ethtool_stat(struct mv88e6xxx_chip *chip, - struct mv88e6xxx_hw_stat *s, + const struct mv88e6xxx_hw_stat *s, int port, u16 bank1_select, u16 histogram) { @@ -1040,42 +1153,37 @@ static uint64_t _mv88e6xxx_get_ethtool_stat(struct mv88e6xxx_chip *chip, return value; } -static int mv88e6xxx_stats_get_strings(struct mv88e6xxx_chip *chip, - uint8_t *data, int types) +static void mv88e6xxx_stats_get_strings(struct mv88e6xxx_chip *chip, + uint8_t **data, int types) { - struct mv88e6xxx_hw_stat *stat; - int i, j; + const struct mv88e6xxx_hw_stat *stat; + int i; - for (i = 0, j = 0; i < ARRAY_SIZE(mv88e6xxx_hw_stats); i++) { + for (i = 0; i < ARRAY_SIZE(mv88e6xxx_hw_stats); i++) { stat = &mv88e6xxx_hw_stats[i]; - if (stat->type & types) { - memcpy(data + j * ETH_GSTRING_LEN, stat->string, - ETH_GSTRING_LEN); - j++; - } + if (stat->type & types) + ethtool_puts(data, stat->string); } - - return j; } -static int mv88e6095_stats_get_strings(struct mv88e6xxx_chip *chip, - uint8_t *data) +static void mv88e6095_stats_get_strings(struct mv88e6xxx_chip *chip, + uint8_t **data) { - return mv88e6xxx_stats_get_strings(chip, data, - STATS_TYPE_BANK0 | STATS_TYPE_PORT); + mv88e6xxx_stats_get_strings(chip, data, + STATS_TYPE_BANK0 | STATS_TYPE_PORT); } -static int mv88e6250_stats_get_strings(struct mv88e6xxx_chip *chip, - uint8_t *data) +static void mv88e6250_stats_get_strings(struct mv88e6xxx_chip *chip, + uint8_t **data) { - return mv88e6xxx_stats_get_strings(chip, data, STATS_TYPE_BANK0); + mv88e6xxx_stats_get_strings(chip, data, STATS_TYPE_BANK0); } -static int mv88e6320_stats_get_strings(struct mv88e6xxx_chip *chip, - uint8_t *data) +static void mv88e6320_stats_get_strings(struct mv88e6xxx_chip *chip, + uint8_t **data) { - return mv88e6xxx_stats_get_strings(chip, data, - STATS_TYPE_BANK0 | STATS_TYPE_BANK1); + mv88e6xxx_stats_get_strings(chip, data, + STATS_TYPE_BANK0 | STATS_TYPE_BANK1); } static const uint8_t *mv88e6xxx_atu_vtu_stats_strings[] = { @@ -1086,21 +1194,18 @@ static const uint8_t *mv88e6xxx_atu_vtu_stats_strings[] = { "vtu_miss_violation", }; -static void mv88e6xxx_atu_vtu_get_strings(uint8_t *data) +static void mv88e6xxx_atu_vtu_get_strings(uint8_t **data) { unsigned int i; for (i = 0; i < ARRAY_SIZE(mv88e6xxx_atu_vtu_stats_strings); i++) - strscpy(data + i * ETH_GSTRING_LEN, - mv88e6xxx_atu_vtu_stats_strings[i], - ETH_GSTRING_LEN); + ethtool_puts(data, mv88e6xxx_atu_vtu_stats_strings[i]); } static void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) { struct mv88e6xxx_chip *chip = ds->priv; - int count = 0; if (stringset != ETH_SS_STATS) return; @@ -1108,15 +1213,12 @@ static void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, mv88e6xxx_reg_lock(chip); if (chip->info->ops->stats_get_strings) - count = chip->info->ops->stats_get_strings(chip, data); + chip->info->ops->stats_get_strings(chip, &data); - if (chip->info->ops->serdes_get_strings) { - data += count * ETH_GSTRING_LEN; - count = chip->info->ops->serdes_get_strings(chip, port, data); - } + if (chip->info->ops->serdes_get_strings) + chip->info->ops->serdes_get_strings(chip, port, &data); - data += count * ETH_GSTRING_LEN; - mv88e6xxx_atu_vtu_get_strings(data); + mv88e6xxx_atu_vtu_get_strings(&data); mv88e6xxx_reg_unlock(chip); } @@ -1124,7 +1226,7 @@ static void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, static int mv88e6xxx_stats_get_sset_count(struct mv88e6xxx_chip *chip, int types) { - struct mv88e6xxx_hw_stat *stat; + const struct mv88e6xxx_hw_stat *stat; int i, j; for (i = 0, j = 0; i < ARRAY_SIZE(mv88e6xxx_hw_stats); i++) { @@ -1183,59 +1285,73 @@ out: return count; } -static int mv88e6xxx_stats_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data, int types, - u16 bank1_select, u16 histogram) +static size_t mv88e6095_stats_get_stat(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data) { - struct mv88e6xxx_hw_stat *stat; - int i, j; - - for (i = 0, j = 0; i < ARRAY_SIZE(mv88e6xxx_hw_stats); i++) { - stat = &mv88e6xxx_hw_stats[i]; - if (stat->type & types) { - mv88e6xxx_reg_lock(chip); - data[j] = _mv88e6xxx_get_ethtool_stat(chip, stat, port, - bank1_select, - histogram); - mv88e6xxx_reg_unlock(chip); + *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0, + MV88E6XXX_G1_STATS_OP_HIST_RX); + return 1; +} - j++; - } - } - return j; +static size_t mv88e6250_stats_get_stat(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data) +{ + *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0, + MV88E6XXX_G1_STATS_OP_HIST_RX); + return 1; } -static int mv88e6095_stats_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +static size_t mv88e6320_stats_get_stat(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data) { - return mv88e6xxx_stats_get_stats(chip, port, data, - STATS_TYPE_BANK0 | STATS_TYPE_PORT, - 0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX); + *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, + MV88E6XXX_G1_STATS_OP_BANK_1_BIT_9, + MV88E6XXX_G1_STATS_OP_HIST_RX); + return 1; } -static int mv88e6250_stats_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +static size_t mv88e6390_stats_get_stat(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data) { - return mv88e6xxx_stats_get_stats(chip, port, data, STATS_TYPE_BANK0, - 0, MV88E6XXX_G1_STATS_OP_HIST_RX_TX); + *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, + MV88E6XXX_G1_STATS_OP_BANK_1_BIT_10, + 0); + return 1; } -static int mv88e6320_stats_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +static size_t mv88e6xxx_stats_get_stat(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data) { - return mv88e6xxx_stats_get_stats(chip, port, data, - STATS_TYPE_BANK0 | STATS_TYPE_BANK1, - MV88E6XXX_G1_STATS_OP_BANK_1_BIT_9, - MV88E6XXX_G1_STATS_OP_HIST_RX_TX); + int ret = 0; + + if (!(stat->type & chip->info->stats_type)) + return 0; + + if (chip->info->ops->stats_get_stat) { + mv88e6xxx_reg_lock(chip); + ret = chip->info->ops->stats_get_stat(chip, port, stat, data); + mv88e6xxx_reg_unlock(chip); + } + + return ret; } -static int mv88e6390_stats_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +static size_t mv88e6xxx_stats_get_stats(struct mv88e6xxx_chip *chip, int port, + uint64_t *data) { - return mv88e6xxx_stats_get_stats(chip, port, data, - STATS_TYPE_BANK0 | STATS_TYPE_BANK1, - MV88E6XXX_G1_STATS_OP_BANK_1_BIT_10, - 0); + const struct mv88e6xxx_hw_stat *stat; + size_t i, j; + + for (i = 0, j = 0; i < ARRAY_SIZE(mv88e6xxx_hw_stats); i++) { + stat = &mv88e6xxx_hw_stats[i]; + j += mv88e6xxx_stats_get_stat(chip, port, stat, &data[j]); + } + return j; } static void mv88e6xxx_atu_vtu_get_stats(struct mv88e6xxx_chip *chip, int port, @@ -1251,10 +1367,9 @@ static void mv88e6xxx_atu_vtu_get_stats(struct mv88e6xxx_chip *chip, int port, static void mv88e6xxx_get_stats(struct mv88e6xxx_chip *chip, int port, uint64_t *data) { - int count = 0; + size_t count; - if (chip->info->ops->stats_get_stats) - count = chip->info->ops->stats_get_stats(chip, port, data); + count = mv88e6xxx_stats_get_stats(chip, port, data); mv88e6xxx_reg_lock(chip); if (chip->info->ops->serdes_get_stats) { @@ -1272,16 +1387,90 @@ static void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, int port, struct mv88e6xxx_chip *chip = ds->priv; int ret; - mv88e6xxx_reg_lock(chip); + ret = mv88e6xxx_stats_snapshot(chip, port); + if (ret < 0) + return; + + mv88e6xxx_get_stats(chip, port, data); +} + +static void mv88e6xxx_get_eth_mac_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_mac_stats *mac_stats) +{ + struct mv88e6xxx_chip *chip = ds->priv; + int ret; ret = mv88e6xxx_stats_snapshot(chip, port); - mv88e6xxx_reg_unlock(chip); + if (ret < 0) + return; +#define MV88E6XXX_ETH_MAC_STAT_MAP(_id, _member) \ + mv88e6xxx_stats_get_stat(chip, port, \ + &mv88e6xxx_hw_stats[MV88E6XXX_HW_STAT_ID_ ## _id], \ + &mac_stats->stats._member) + + MV88E6XXX_ETH_MAC_STAT_MAP(out_unicast, FramesTransmittedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(single, SingleCollisionFrames); + MV88E6XXX_ETH_MAC_STAT_MAP(multiple, MultipleCollisionFrames); + MV88E6XXX_ETH_MAC_STAT_MAP(in_unicast, FramesReceivedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(in_fcs_error, FrameCheckSequenceErrors); + MV88E6XXX_ETH_MAC_STAT_MAP(out_octets, OctetsTransmittedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(deferred, FramesWithDeferredXmissions); + MV88E6XXX_ETH_MAC_STAT_MAP(late, LateCollisions); + MV88E6XXX_ETH_MAC_STAT_MAP(in_good_octets, OctetsReceivedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(out_multicasts, MulticastFramesXmittedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(out_broadcasts, BroadcastFramesXmittedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(excessive, FramesWithExcessiveDeferral); + MV88E6XXX_ETH_MAC_STAT_MAP(in_multicasts, MulticastFramesReceivedOK); + MV88E6XXX_ETH_MAC_STAT_MAP(in_broadcasts, BroadcastFramesReceivedOK); + +#undef MV88E6XXX_ETH_MAC_STAT_MAP + + mac_stats->stats.FramesTransmittedOK += mac_stats->stats.MulticastFramesXmittedOK; + mac_stats->stats.FramesTransmittedOK += mac_stats->stats.BroadcastFramesXmittedOK; + mac_stats->stats.FramesReceivedOK += mac_stats->stats.MulticastFramesReceivedOK; + mac_stats->stats.FramesReceivedOK += mac_stats->stats.BroadcastFramesReceivedOK; +} + +static void mv88e6xxx_get_rmon_stats(struct dsa_switch *ds, int port, + struct ethtool_rmon_stats *rmon_stats, + const struct ethtool_rmon_hist_range **ranges) +{ + static const struct ethtool_rmon_hist_range rmon_ranges[] = { + { 64, 64 }, + { 65, 127 }, + { 128, 255 }, + { 256, 511 }, + { 512, 1023 }, + { 1024, 65535 }, + {} + }; + struct mv88e6xxx_chip *chip = ds->priv; + int ret; + + ret = mv88e6xxx_stats_snapshot(chip, port); if (ret < 0) return; - mv88e6xxx_get_stats(chip, port, data); +#define MV88E6XXX_RMON_STAT_MAP(_id, _member) \ + mv88e6xxx_stats_get_stat(chip, port, \ + &mv88e6xxx_hw_stats[MV88E6XXX_HW_STAT_ID_ ## _id], \ + &rmon_stats->stats._member) + + MV88E6XXX_RMON_STAT_MAP(in_undersize, undersize_pkts); + MV88E6XXX_RMON_STAT_MAP(in_oversize, oversize_pkts); + MV88E6XXX_RMON_STAT_MAP(in_fragments, fragments); + MV88E6XXX_RMON_STAT_MAP(in_jabber, jabbers); + MV88E6XXX_RMON_STAT_MAP(hist_64bytes, hist[0]); + MV88E6XXX_RMON_STAT_MAP(hist_65_127bytes, hist[1]); + MV88E6XXX_RMON_STAT_MAP(hist_128_255bytes, hist[2]); + MV88E6XXX_RMON_STAT_MAP(hist_256_511bytes, hist[3]); + MV88E6XXX_RMON_STAT_MAP(hist_512_1023bytes, hist[4]); + MV88E6XXX_RMON_STAT_MAP(hist_1024_max_bytes, hist[5]); +#undef MV88E6XXX_RMON_STAT_MAP + + *ranges = rmon_ranges; } static int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port) @@ -1324,15 +1513,8 @@ static void mv88e6xxx_get_regs(struct dsa_switch *ds, int port, mv88e6xxx_reg_unlock(chip); } -static int mv88e6xxx_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - /* Nothing to do on the port's MAC */ - return 0; -} - static int mv88e6xxx_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) + struct ethtool_keee *e) { /* Nothing to do on the port's MAC */ return 0; @@ -1670,6 +1852,8 @@ static int mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid, if (!chip->info->ops->vtu_getnext) return -EOPNOTSUPP; + memset(entry, 0, sizeof(*entry)); + entry->vid = vid ? vid - 1 : mv88e6xxx_max_vid(chip); entry->valid = false; @@ -1721,36 +1905,9 @@ static int mv88e6xxx_vtu_loadpurge(struct mv88e6xxx_chip *chip, return chip->info->ops->vtu_loadpurge(chip, entry); } -static int mv88e6xxx_fid_map_vlan(struct mv88e6xxx_chip *chip, - const struct mv88e6xxx_vtu_entry *entry, - void *_fid_bitmap) -{ - unsigned long *fid_bitmap = _fid_bitmap; - - set_bit(entry->fid, fid_bitmap); - return 0; -} - -int mv88e6xxx_fid_map(struct mv88e6xxx_chip *chip, unsigned long *fid_bitmap) -{ - bitmap_zero(fid_bitmap, MV88E6XXX_N_FID); - - /* Every FID has an associated VID, so walking the VTU - * will discover the full set of FIDs in use. - */ - return mv88e6xxx_vtu_walk(chip, mv88e6xxx_fid_map_vlan, fid_bitmap); -} - static int mv88e6xxx_atu_new(struct mv88e6xxx_chip *chip, u16 *fid) { - DECLARE_BITMAP(fid_bitmap, MV88E6XXX_N_FID); - int err; - - err = mv88e6xxx_fid_map(chip, fid_bitmap); - if (err) - return err; - - *fid = find_first_zero_bit(fid_bitmap, MV88E6XXX_N_FID); + *fid = find_first_zero_bit(chip->fid_bitmap, MV88E6XXX_N_FID); if (unlikely(*fid >= mv88e6xxx_num_databases(chip))) return -ENOSPC; @@ -1805,7 +1962,16 @@ static int mv88e6xxx_mst_put(struct mv88e6xxx_chip *chip, u8 sid) struct mv88e6xxx_mst *mst, *tmp; int err; - if (!sid) + /* If the SID is zero, it is for a VLAN mapped to the default MSTI, + * and mv88e6xxx_stu_setup() made sure it is always present, and thus, + * should not be removed here. + * + * If the chip lacks STU support, numerically the "sid" variable will + * happen to also be zero, but we don't want to rely on that fact, so + * we explicitly test that first. In that case, there is also nothing + * to do here. + */ + if (!mv88e6xxx_has_stu(chip) || !sid) return 0; list_for_each_entry_safe(mst, tmp, &chip->msts, node) { @@ -2053,13 +2219,11 @@ mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port, return err; } -static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, - const unsigned char *addr, u16 vid, - u8 state) +static int mv88e6xxx_port_db_get(struct mv88e6xxx_chip *chip, + const unsigned char *addr, u16 vid, + u16 *fid, struct mv88e6xxx_atu_entry *entry) { - struct mv88e6xxx_atu_entry entry; struct mv88e6xxx_vtu_entry vlan; - u16 fid; int err; /* Ports have two private address databases: one for when the port is @@ -2070,7 +2234,7 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, * VLAN ID into the port's database used for VLAN-unaware bridging. */ if (vid == 0) { - fid = MV88E6XXX_FID_BRIDGED; + *fid = MV88E6XXX_FID_BRIDGED; } else { err = mv88e6xxx_vtu_get(chip, vid, &vlan); if (err) @@ -2080,14 +2244,39 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, if (!vlan.valid) return -EOPNOTSUPP; - fid = vlan.fid; + *fid = vlan.fid; } - entry.state = 0; - ether_addr_copy(entry.mac, addr); - eth_addr_dec(entry.mac); + entry->state = 0; + ether_addr_copy(entry->mac, addr); + eth_addr_dec(entry->mac); + + return mv88e6xxx_g1_atu_getnext(chip, *fid, entry); +} + +static bool mv88e6xxx_port_db_find(struct mv88e6xxx_chip *chip, + const unsigned char *addr, u16 vid) +{ + struct mv88e6xxx_atu_entry entry; + u16 fid; + int err; + + err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry); + if (err) + return false; + + return entry.state && ether_addr_equal(entry.mac, addr); +} + +static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, + const unsigned char *addr, u16 vid, + u8 state) +{ + struct mv88e6xxx_atu_entry entry; + u16 fid; + int err; - err = mv88e6xxx_g1_atu_getnext(chip, fid, &entry); + err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry); if (err) return err; @@ -2457,6 +2646,9 @@ static int mv88e6xxx_port_vlan_join(struct mv88e6xxx_chip *chip, int port, port, vid); } + /* Record FID used in SW FID map */ + bitmap_set(chip->fid_bitmap, vlan.fid, 1); + return 0; } @@ -2486,7 +2678,7 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, else member = MV88E6XXX_G1_VTU_DATA_MEMBER_TAG_TAGGED; - /* net/dsa/slave.c will call dsa_port_vlan_add() for the affected port + /* net/dsa/user.c will call dsa_port_vlan_add() for the affected port * and then the CPU port. Do not warn for duplicates for the CPU port. */ warn = !dsa_is_cpu_port(ds, port) && !dsa_is_dsa_port(ds, port); @@ -2562,6 +2754,9 @@ static int mv88e6xxx_port_vlan_leave(struct mv88e6xxx_chip *chip, err = mv88e6xxx_mst_put(chip, vlan.sid); if (err) return err; + + /* Record FID freed in SW FID map */ + bitmap_clear(chip->fid_bitmap, vlan.fid, 1); } return mv88e6xxx_g1_atu_remove(chip, vlan.fid, port, false); @@ -2685,6 +2880,13 @@ static int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port, mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC); + if (err) + goto out; + + if (!mv88e6xxx_port_db_find(chip, addr, vid)) + err = -ENOSPC; + +out: mv88e6xxx_reg_unlock(chip); return err; @@ -2949,6 +3151,7 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip) static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) { struct gpio_desc *gpiod = chip->reset; + int err; /* If there is a GPIO connected to the reset pin, toggle it */ if (gpiod) { @@ -2957,15 +3160,26 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) * mid-byte, causing the first EEPROM read after the reset * from the wrong location resulting in the switch booting * to wrong mode and inoperable. + * For this reason, switch families with EEPROM support + * generally wait for EEPROM loads to complete as their pre- + * and post-reset handlers. */ - mv88e6xxx_g1_wait_eeprom_done(chip); + if (chip->info->ops->hardware_reset_pre) { + err = chip->info->ops->hardware_reset_pre(chip); + if (err) + dev_err(chip->dev, "pre-reset error: %d\n", err); + } gpiod_set_value_cansleep(gpiod, 1); usleep_range(10000, 20000); gpiod_set_value_cansleep(gpiod, 0); usleep_range(10000, 20000); - mv88e6xxx_g1_wait_eeprom_done(chip); + if (chip->info->ops->hardware_reset_post) { + err = chip->info->ops->hardware_reset_post(chip); + if (err) + dev_err(chip->dev, "post-reset error: %d\n", err); + } } } @@ -3151,14 +3365,44 @@ static int mv88e6xxx_setup_upstream_port(struct mv88e6xxx_chip *chip, int port) static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) { struct device_node *phy_handle = NULL; + struct fwnode_handle *ports_fwnode; + struct fwnode_handle *port_fwnode; struct dsa_switch *ds = chip->ds; + struct mv88e6xxx_port *p; struct dsa_port *dp; int tx_amp; int err; u16 reg; + u32 val; + + p = &chip->ports[port]; + p->chip = chip; + p->port = port; + + /* Look up corresponding fwnode if any */ + ports_fwnode = device_get_named_child_node(chip->dev, "ethernet-ports"); + if (!ports_fwnode) + ports_fwnode = device_get_named_child_node(chip->dev, "ports"); + if (ports_fwnode) { + fwnode_for_each_child_node(ports_fwnode, port_fwnode) { + if (fwnode_property_read_u32(port_fwnode, "reg", &val)) + continue; + if (val == port) { + p->fwnode = port_fwnode; + p->fiber = fwnode_property_present(port_fwnode, "sfp"); + break; + } + } + fwnode_handle_put(ports_fwnode); + } else { + dev_dbg(chip->dev, "no ethernet ports node defined for the device\n"); + } - chip->ports[port].chip = chip; - chip->ports[port].port = port; + if (chip->info->ops->port_setup_leds) { + err = chip->info->ops->port_setup_leds(chip, port); + if (err && err != -EOPNOTSUPP) + return err; + } err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED, SPEED_UNFORCED, DUPLEX_UNFORCED, @@ -3406,7 +3650,8 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) mv88e6xxx_reg_lock(chip); if (chip->info->ops->port_set_jumbo_size) ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu); - else if (chip->info->ops->set_max_frame_size) + else if (chip->info->ops->set_max_frame_size && + dsa_is_cpu_port(ds, port)) ret = chip->info->ops->set_max_frame_size(chip, new_mtu); mv88e6xxx_reg_unlock(chip); @@ -3440,6 +3685,21 @@ static int mv88e6xxx_stats_setup(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_stats_clear(chip); } +static int mv88e6320_setup_errata(struct mv88e6xxx_chip *chip) +{ + u16 dummy; + int err; + + /* Workaround for erratum + * 3.3 RGMII timing may be out of spec when transmit delay is enabled + */ + err = mv88e6xxx_port_hidden_write(chip, 0, 0xf, 0x7, 0xe000); + if (err) + return err; + + return mv88e6xxx_port_hidden_read(chip, 0, 0xf, 0x7, &dummy); +} + /* Check if the errata has already been applied. */ static bool mv88e6390_setup_errata_applied(struct mv88e6xxx_chip *chip) { @@ -3531,7 +3791,7 @@ static int mv88e6xxx_mdio_read_c45(struct mii_bus *bus, int phy, int devad, int err; if (!chip->info->ops->phy_read_c45) - return -EOPNOTSUPP; + return -ENODEV; mv88e6xxx_reg_lock(chip); err = chip->info->ops->phy_read_c45(chip, bus, phy, devad, reg, &val); @@ -3584,7 +3844,10 @@ static int mv88e6xxx_mdio_register(struct mv88e6xxx_chip *chip, if (external) { mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_g2_scratch_gpio_set_smi(chip, true); + if (chip->info->family == MV88E6XXX_FAMILY_6393) + err = mv88e6393x_g2_scratch_gpio_set_smi(chip, true); + else + err = mv88e6390_g2_scratch_gpio_set_smi(chip, true); mv88e6xxx_reg_unlock(chip); if (err) @@ -3702,6 +3965,8 @@ static void mv88e6xxx_teardown(struct dsa_switch *ds) mv88e6xxx_teardown_devlink_params(ds); dsa_devlink_resources_unregister(ds); mv88e6xxx_teardown_devlink_regions_global(ds); + mv88e6xxx_hwtstamp_free(chip); + mv88e6xxx_ptp_free(chip); mv88e6xxx_mdios_unregister(chip); } @@ -3717,7 +3982,7 @@ static int mv88e6xxx_setup(struct dsa_switch *ds) return err; chip->ds = ds; - ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip); + ds->user_mii_bus = mv88e6xxx_default_mdio_bus(chip); /* Since virtual bridges are mapped in the PVT, the number we support * depends on the physical switch topology. We need to let DSA figure @@ -3842,7 +4107,7 @@ unlock: mv88e6xxx_reg_unlock(chip); if (err) - goto out_mdios; + goto out_hwtstamp; /* Have to be called without holding the register lock, since * they take the devlink lock, and we later take the locks in @@ -3851,7 +4116,7 @@ unlock: */ err = mv88e6xxx_setup_devlink_resources(ds); if (err) - goto out_mdios; + goto out_hwtstamp; err = mv88e6xxx_setup_devlink_params(ds); if (err) @@ -3867,7 +4132,9 @@ out_params: mv88e6xxx_teardown_devlink_params(ds); out_resources: dsa_devlink_resources_unregister(ds); -out_mdios: +out_hwtstamp: + mv88e6xxx_hwtstamp_free(chip); + mv88e6xxx_ptp_free(chip); mv88e6xxx_mdios_unregister(chip); return err; @@ -3878,7 +4145,8 @@ static int mv88e6xxx_port_setup(struct dsa_switch *ds, int port) struct mv88e6xxx_chip *chip = ds->priv; int err; - if (chip->info->ops->pcs_ops->pcs_init) { + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_init) { err = chip->info->ops->pcs_ops->pcs_init(chip, port); if (err) return err; @@ -3893,7 +4161,8 @@ static void mv88e6xxx_port_teardown(struct dsa_switch *ds, int port) mv88e6xxx_teardown_devlink_regions_port(ds, port); - if (chip->info->ops->pcs_ops->pcs_teardown) + if (chip->info->ops->pcs_ops && + chip->info->ops->pcs_ops->pcs_teardown) chip->info->ops->pcs_ops->pcs_teardown(chip, port); } @@ -3971,7 +4240,7 @@ static const struct mv88e6xxx_ops mv88e6085_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4009,7 +4278,7 @@ static const struct mv88e6xxx_ops mv88e6095_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .mgmt_rsvd2cpu = mv88e6185_g2_mgmt_rsvd2cpu, .ppu_enable = mv88e6185_g1_ppu_enable, .ppu_disable = mv88e6185_g1_ppu_disable, @@ -4050,7 +4319,7 @@ static const struct mv88e6xxx_ops mv88e6097_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4092,7 +4361,7 @@ static const struct mv88e6xxx_ops mv88e6123_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4135,7 +4404,7 @@ static const struct mv88e6xxx_ops mv88e6131_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4184,12 +4453,14 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4239,7 +4510,7 @@ static const struct mv88e6xxx_ops mv88e6161_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4277,7 +4548,7 @@ static const struct mv88e6xxx_ops mv88e6165_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4325,7 +4596,7 @@ static const struct mv88e6xxx_ops mv88e6171_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4338,7 +4609,7 @@ static const struct mv88e6xxx_ops mv88e6171_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6172_ops = { @@ -4369,17 +4640,20 @@ static const struct mv88e6xxx_ops mv88e6172_ops = { .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, .port_disable_pri_override = mv88e6xxx_port_disable_pri_override, .port_get_cmode = mv88e6352_port_get_cmode, + .port_setup_leds = mv88e6xxx_port_setup_leds, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6320_g1_stats_snapshot, .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4425,7 +4699,7 @@ static const struct mv88e6xxx_ops mv88e6175_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4438,7 +4712,7 @@ static const struct mv88e6xxx_ops mv88e6175_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6176_ops = { @@ -4469,17 +4743,20 @@ static const struct mv88e6xxx_ops mv88e6176_ops = { .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, .port_disable_pri_override = mv88e6xxx_port_disable_pri_override, .port_get_cmode = mv88e6352_port_get_cmode, + .port_setup_leds = mv88e6xxx_port_setup_leds, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6320_g1_stats_snapshot, .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4519,7 +4796,7 @@ static const struct mv88e6xxx_ops mv88e6185_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -4568,12 +4845,14 @@ static const struct mv88e6xxx_ops mv88e6190_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4626,12 +4905,14 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4682,12 +4963,14 @@ static const struct mv88e6xxx_ops mv88e6191_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4736,17 +5019,20 @@ static const struct mv88e6xxx_ops mv88e6240_ops = { .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, .port_disable_pri_override = mv88e6xxx_port_disable_pri_override, .port_get_cmode = mv88e6352_port_get_cmode, + .port_setup_leds = mv88e6xxx_port_setup_leds, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6320_g1_stats_snapshot, .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4794,17 +5080,19 @@ static const struct mv88e6xxx_ops mv88e6250_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6250_stats_get_sset_count, .stats_get_strings = mv88e6250_stats_get_strings, - .stats_get_stats = mv88e6250_stats_get_stats, + .stats_get_stat = mv88e6250_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6250_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6250_g1_wait_eeprom_done_prereset, + .hardware_reset_post = mv88e6xxx_g1_wait_eeprom_done, .reset = mv88e6250_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, .avb_ops = &mv88e6352_avb_ops, - .ptp_ops = &mv88e6250_ptp_ops, + .ptp_ops = &mv88e6352_ptp_ops, .phylink_get_caps = mv88e6250_phylink_get_caps, .set_max_frame_size = mv88e6185_g1_set_max_frame_size, }; @@ -4841,12 +5129,14 @@ static const struct mv88e6xxx_ops mv88e6290_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4870,6 +5160,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = { static const struct mv88e6xxx_ops mv88e6320_ops = { /* MV88E6XXX_FAMILY_6320 */ + .setup_errata = mv88e6320_setup_errata, .ieee_pri_map = mv88e6085_g1_ieee_pri_map, .ip_pri_map = mv88e6085_g1_ip_pri_map, .irl_init_all = mv88e6352_g2_irl_init_all, @@ -4885,6 +5176,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay, .port_set_speed_duplex = mv88e6185_port_set_speed_duplex, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, @@ -4900,23 +5192,28 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6320_stats_get_stats, + .stats_get_stat = mv88e6320_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, - .vtu_getnext = mv88e6185_g1_vtu_getnext, - .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, + .vtu_getnext = mv88e6352_g1_vtu_getnext, + .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .stu_getnext = mv88e6352_g1_stu_getnext, + .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6321_ops = { /* MV88E6XXX_FAMILY_6320 */ + .setup_errata = mv88e6320_setup_errata, .ieee_pri_map = mv88e6085_g1_ieee_pri_map, .ip_pri_map = mv88e6085_g1_ip_pri_map, .irl_init_all = mv88e6352_g2_irl_init_all, @@ -4932,6 +5229,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay, .port_set_speed_duplex = mv88e6185_port_set_speed_duplex, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, @@ -4947,18 +5245,22 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6320_stats_get_stats, + .stats_get_stat = mv88e6320_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, - .vtu_getnext = mv88e6185_g1_vtu_getnext, - .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, + .vtu_getnext = mv88e6352_g1_vtu_getnext, + .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .stu_getnext = mv88e6352_g1_stu_getnext, + .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e632x_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6341_ops = { @@ -4996,12 +5298,14 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5054,7 +5358,7 @@ static const struct mv88e6xxx_ops mv88e6350_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -5067,7 +5371,7 @@ static const struct mv88e6xxx_ops mv88e6350_ops = { .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, .stu_getnext = mv88e6352_g1_stu_getnext, .stu_loadpurge = mv88e6352_g1_stu_loadpurge, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6351_ops = { @@ -5100,7 +5404,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = { .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, @@ -5115,7 +5419,7 @@ static const struct mv88e6xxx_ops mv88e6351_ops = { .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, - .phylink_get_caps = mv88e6185_phylink_get_caps, + .phylink_get_caps = mv88e6351_phylink_get_caps, }; static const struct mv88e6xxx_ops mv88e6352_ops = { @@ -5146,17 +5450,20 @@ static const struct mv88e6xxx_ops mv88e6352_ops = { .port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit, .port_disable_pri_override = mv88e6xxx_port_disable_pri_override, .port_get_cmode = mv88e6352_port_get_cmode, + .port_setup_leds = mv88e6xxx_port_setup_leds, .port_setup_message_port = mv88e6xxx_setup_message_port, .stats_snapshot = mv88e6320_g1_stats_snapshot, .stats_set_histogram = mv88e6095_g1_stats_set_histogram, .stats_get_sset_count = mv88e6095_stats_get_sset_count, .stats_get_strings = mv88e6095_stats_get_strings, - .stats_get_stats = mv88e6095_stats_get_stats, + .stats_get_stat = mv88e6095_stats_get_stat, .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5213,12 +5520,14 @@ static const struct mv88e6xxx_ops mv88e6390_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5275,12 +5584,14 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, .set_cpu_port = mv88e6390_g1_set_cpu_port, .set_egress_port = mv88e6390_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5337,7 +5648,7 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = { .stats_set_histogram = mv88e6390_g1_stats_set_histogram, .stats_get_sset_count = mv88e6320_stats_get_sset_count, .stats_get_strings = mv88e6320_stats_get_strings, - .stats_get_stats = mv88e6390_stats_get_stats, + .stats_get_stat = mv88e6390_stats_get_stat, /* .set_cpu_port is missing because this family does not support a global * CPU port, only per port CPU port which is set via * .port_set_upstream_port method. @@ -5346,6 +5657,8 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = { .watchdog_ops = &mv88e6393x_watchdog_ops, .mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5370,8 +5683,12 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .family = MV88E6XXX_FAMILY_6250, .name = "Marvell 88E6020", .num_databases = 64, - .num_ports = 4, + /* Ports 2-4 are not routed to pins + * => usable ports 0, 1, 5, 6 + */ + .num_ports = 7, .num_internal_phys = 2, + .invalid_port_mask = BIT(2) | BIT(3) | BIT(4), .max_vid = 4095, .port_base_addr = 0x8, .phy_base_addr = 0x0, @@ -5380,6 +5697,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 5, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ops = &mv88e6250_ops, @@ -5400,6 +5718,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 5, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ops = &mv88e6250_ops, @@ -5422,6 +5741,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5443,6 +5763,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 8, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .ops = &mv88e6095_ops, @@ -5465,6 +5786,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5489,6 +5811,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5511,6 +5834,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 9, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .ops = &mv88e6131_ops, @@ -5520,7 +5844,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6141, .family = MV88E6XXX_FAMILY_6341, .name = "Marvell 88E6141", - .num_databases = 4096, + .num_databases = 256, .num_macs = 2048, .num_ports = 6, .num_internal_phys = 5, @@ -5532,9 +5856,10 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global1_addr = 0x1b, .global2_addr = 0x1c, .age_time_coeff = 3750, - .atu_move_port_mask = 0x1f, + .atu_move_port_mask = 0xf, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -5558,6 +5883,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5583,6 +5909,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5607,6 +5934,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5632,6 +5960,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5656,6 +5985,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5681,6 +6011,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5703,6 +6034,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 8, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -5727,6 +6059,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .atu_move_port_mask = 0x1f, @@ -5751,6 +6084,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -5774,6 +6108,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -5798,6 +6133,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -5822,6 +6158,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -5849,6 +6186,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ptp_support = true, @@ -5873,6 +6211,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5896,6 +6235,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ptp_support = true, @@ -5919,6 +6259,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -5933,9 +6274,11 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .num_databases = 4096, .num_macs = 8192, .num_ports = 7, - .num_internal_phys = 5, + .num_internal_phys = 2, + .internal_phys_offset = 3, .num_gpio = 15, .max_vid = 4095, + .max_sid = 63, .port_base_addr = 0x10, .phy_base_addr = 0x0, .global1_addr = 0x1b, @@ -5943,6 +6286,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5958,9 +6302,11 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .num_databases = 4096, .num_macs = 8192, .num_ports = 7, - .num_internal_phys = 5, + .num_internal_phys = 2, + .internal_phys_offset = 3, .num_gpio = 15, .max_vid = 4095, + .max_sid = 63, .port_base_addr = 0x10, .phy_base_addr = 0x0, .global1_addr = 0x1b, @@ -5968,7 +6314,9 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, + .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, .ptp_support = true, @@ -5979,7 +6327,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6341, .family = MV88E6XXX_FAMILY_6341, .name = "Marvell 88E6341", - .num_databases = 4096, + .num_databases = 256, .num_macs = 2048, .num_internal_phys = 5, .num_ports = 6, @@ -5991,9 +6339,10 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global1_addr = 0x1b, .global2_addr = 0x1c, .age_time_coeff = 3750, - .atu_move_port_mask = 0x1f, + .atu_move_port_mask = 0xf, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -6018,6 +6367,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6042,6 +6392,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6067,6 +6418,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6085,7 +6437,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .invalid_port_mask = BIT(1) | BIT(2) | BIT(8), .num_internal_phys = 5, .internal_phys_offset = 3, - .max_vid = 4095, + .max_vid = 8191, .max_sid = 63, .port_base_addr = 0x0, .phy_base_addr = 0x0, @@ -6094,6 +6446,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6118,6 +6471,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6143,6 +6497,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6168,6 +6523,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6331,6 +6687,13 @@ static int mv88e6xxx_port_mdb_add(struct dsa_switch *ds, int port, mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_db_load_purge(chip, port, mdb->addr, mdb->vid, MV88E6XXX_G1_ATU_DATA_STATE_MC_STATIC); + if (err) + goto out; + + if (!mv88e6xxx_port_db_find(chip, mdb->addr, mdb->vid)) + err = -ENOSPC; + +out: mv88e6xxx_reg_unlock(chip); return err; @@ -6785,6 +7148,15 @@ static int mv88e6xxx_crosschip_lag_leave(struct dsa_switch *ds, int sw_index, return err_sync ? : err_pvt; } +static const struct phylink_mac_ops mv88e6xxx_phylink_mac_ops = { + .mac_select_pcs = mv88e6xxx_mac_select_pcs, + .mac_prepare = mv88e6xxx_mac_prepare, + .mac_config = mv88e6xxx_mac_config, + .mac_finish = mv88e6xxx_mac_finish, + .mac_link_down = mv88e6xxx_mac_link_down, + .mac_link_up = mv88e6xxx_mac_link_up, +}; + static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .get_tag_protocol = mv88e6xxx_get_tag_protocol, .change_tag_protocol = mv88e6xxx_change_tag_protocol, @@ -6793,18 +7165,14 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .port_setup = mv88e6xxx_port_setup, .port_teardown = mv88e6xxx_port_teardown, .phylink_get_caps = mv88e6xxx_get_caps, - .phylink_mac_select_pcs = mv88e6xxx_mac_select_pcs, - .phylink_mac_prepare = mv88e6xxx_mac_prepare, - .phylink_mac_config = mv88e6xxx_mac_config, - .phylink_mac_finish = mv88e6xxx_mac_finish, - .phylink_mac_link_down = mv88e6xxx_mac_link_down, - .phylink_mac_link_up = mv88e6xxx_mac_link_up, .get_strings = mv88e6xxx_get_strings, .get_ethtool_stats = mv88e6xxx_get_ethtool_stats, + .get_eth_mac_stats = mv88e6xxx_get_eth_mac_stats, + .get_rmon_stats = mv88e6xxx_get_rmon_stats, .get_sset_count = mv88e6xxx_get_sset_count, .port_max_mtu = mv88e6xxx_get_max_mtu, .port_change_mtu = mv88e6xxx_change_mtu, - .get_mac_eee = mv88e6xxx_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = mv88e6xxx_set_mac_eee, .get_eeprom_len = mv88e6xxx_get_eeprom_len, .get_eeprom = mv88e6xxx_get_eeprom, @@ -6865,6 +7233,7 @@ static int mv88e6xxx_register_switch(struct mv88e6xxx_chip *chip) ds->priv = chip; ds->dev = dev; ds->ops = &mv88e6xxx_switch_ops; + ds->phylink_mac_ops = &mv88e6xxx_phylink_mac_ops; ds->ageing_time_min = chip->info->age_time_coeff; ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX; @@ -6996,13 +7365,13 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev) err = mv88e6xxx_switch_reset(chip); mv88e6xxx_reg_unlock(chip); if (err) - goto out; + goto out_phy; if (np) { chip->irq = of_irq_get(np, 0); if (chip->irq == -EPROBE_DEFER) { err = chip->irq; - goto out; + goto out_phy; } } @@ -7021,7 +7390,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev) mv88e6xxx_reg_unlock(chip); if (err) - goto out; + goto out_phy; if (chip->info->g2_irqs > 0) { err = mv88e6xxx_g2_irq_setup(chip); @@ -7055,6 +7424,8 @@ out_g1_irq: mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); +out_phy: + mv88e6xxx_phy_destroy(chip); out: if (pdata) dev_put(pdata->netdev); @@ -7072,12 +7443,6 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) chip = ds->priv; - if (chip->info->ptp_support) { - mv88e6xxx_hwtstamp_free(chip); - mv88e6xxx_ptp_free(chip); - } - - mv88e6xxx_phy_destroy(chip); mv88e6xxx_unregister_switch(chip); mv88e6xxx_g1_vtu_prob_irq_free(chip); @@ -7090,6 +7455,8 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); + + mv88e6xxx_phy_destroy(chip); } static void mv88e6xxx_shutdown(struct mdio_device *mdiodev) diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 44383a03ef2f..2f211e55cb47 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -13,7 +13,9 @@ #include <linux/irq.h> #include <linux/gpio/consumer.h> #include <linux/kthread.h> +#include <linux/leds.h> #include <linux/phy.h> +#include <linux/property.h> #include <linux/ptp_clock_kernel.h> #include <linux/timecounter.h> #include <net/dsa.h> @@ -142,6 +144,7 @@ struct mv88e6xxx_info { unsigned int age_time_coeff; unsigned int g1_irqs; unsigned int g2_irqs; + int stats_type; bool pvt; /* Mark certain ports as invalid. This is required for example for the @@ -206,6 +209,7 @@ struct mv88e6xxx_gpio_ops; struct mv88e6xxx_avb_ops; struct mv88e6xxx_ptp_ops; struct mv88e6xxx_pcs_ops; +struct mv88e6xxx_cc_coeffs; struct mv88e6xxx_irq { u16 masked; @@ -237,7 +241,7 @@ struct mv88e6xxx_port_hwtstamp { u16 tx_seq_id; /* Current timestamp configuration */ - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; }; enum mv88e6xxx_policy_mapping { @@ -275,6 +279,7 @@ struct mv88e6xxx_vlan { struct mv88e6xxx_port { struct mv88e6xxx_chip *chip; int port; + struct fwnode_handle *fwnode; struct mv88e6xxx_vlan bridge_pvid; u64 serdes_stats[2]; u64 atu_member_violation; @@ -289,6 +294,11 @@ struct mv88e6xxx_port { struct devlink_region *region; void *pcs_private; + /* LED related information */ + bool fiber; + struct led_classdev led0; + struct led_classdev led1; + /* MacAuth Bypass control flag */ bool mab; }; @@ -318,6 +328,17 @@ struct mv88e6xxx_mst { struct mv88e6xxx_stu_entry stu; }; +#define STATS_TYPE_PORT BIT(0) +#define STATS_TYPE_BANK0 BIT(1) +#define STATS_TYPE_BANK1 BIT(2) + +struct mv88e6xxx_hw_stat { + char string[ETH_GSTRING_LEN]; + size_t size; + int reg; + int type; +}; + struct mv88e6xxx_chip { const struct mv88e6xxx_info *info; @@ -397,13 +418,12 @@ struct mv88e6xxx_chip { struct cyclecounter tstamp_cc; struct timecounter tstamp_tc; struct delayed_work overflow_work; + const struct mv88e6xxx_cc_coeffs *cc_coeffs; struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_clock_info; struct delayed_work tai_event_work; struct ptp_pin_desc pin_config[MV88E6XXX_MAX_GPIO]; - u16 trig_config; - u16 evcap_config; u16 enable_count; /* Current ingress and egress monitor ports */ @@ -421,6 +441,9 @@ struct mv88e6xxx_chip { /* Bridge MST to SID mappings */ struct list_head msts; + + /* FID map */ + DECLARE_BITMAP(fid_bitmap, MV88E6XXX_N_FID); }; struct mv88e6xxx_bus_ops { @@ -476,6 +499,12 @@ struct mv88e6xxx_ops { int (*ppu_enable)(struct mv88e6xxx_chip *chip); int (*ppu_disable)(struct mv88e6xxx_chip *chip); + /* Additional handlers to run before and after hard reset, to make sure + * that the switch and EEPROM are in a good state. + */ + int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip); + int (*hardware_reset_post)(struct mv88e6xxx_chip *chip); + /* Switch Software Reset */ int (*reset)(struct mv88e6xxx_chip *chip); @@ -555,6 +584,9 @@ struct mv88e6xxx_ops { phy_interface_t mode); int (*port_get_cmode)(struct mv88e6xxx_chip *chip, int port, u8 *cmode); + /* LED control */ + int (*port_setup_leds)(struct mv88e6xxx_chip *chip, int port); + /* Some devices have a per port register indicating what is * the upstream port this port should forward to. */ @@ -573,9 +605,10 @@ struct mv88e6xxx_ops { /* Return the number of strings describing statistics */ int (*stats_get_sset_count)(struct mv88e6xxx_chip *chip); - int (*stats_get_strings)(struct mv88e6xxx_chip *chip, uint8_t *data); - int (*stats_get_stats)(struct mv88e6xxx_chip *chip, int port, - uint64_t *data); + void (*stats_get_strings)(struct mv88e6xxx_chip *chip, uint8_t **data); + size_t (*stats_get_stat)(struct mv88e6xxx_chip *chip, int port, + const struct mv88e6xxx_hw_stat *stat, + uint64_t *data); int (*set_cpu_port)(struct mv88e6xxx_chip *chip, int port); int (*set_egress_port)(struct mv88e6xxx_chip *chip, enum mv88e6xxx_egress_direction direction, @@ -599,10 +632,10 @@ struct mv88e6xxx_ops { /* Statistics from the SERDES interface */ int (*serdes_get_sset_count)(struct mv88e6xxx_chip *chip, int port); - int (*serdes_get_strings)(struct mv88e6xxx_chip *chip, int port, - uint8_t *data); - int (*serdes_get_stats)(struct mv88e6xxx_chip *chip, int port, - uint64_t *data); + int (*serdes_get_strings)(struct mv88e6xxx_chip *chip, int port, + uint8_t **data); + size_t (*serdes_get_stats)(struct mv88e6xxx_chip *chip, int port, + uint64_t *data); /* SERDES registers for ethtool */ int (*serdes_get_regs_len)(struct mv88e6xxx_chip *chip, int port); @@ -697,7 +730,7 @@ struct mv88e6xxx_avb_ops { }; struct mv88e6xxx_ptp_ops { - u64 (*clock_read)(const struct cyclecounter *cc); + u64 (*clock_read)(struct cyclecounter *cc); int (*ptp_enable)(struct ptp_clock_info *ptp, struct ptp_clock_request *rq, int on); int (*ptp_verify)(struct ptp_clock_info *ptp, unsigned int pin, @@ -713,10 +746,6 @@ struct mv88e6xxx_ptp_ops { int arr1_sts_reg; int dep_sts_reg; u32 rx_filters; - u32 cc_shift; - u32 cc_mult; - u32 cc_mult_num; - u32 cc_mult_dem; }; struct mv88e6xxx_pcs_ops { @@ -727,17 +756,6 @@ struct mv88e6xxx_pcs_ops { }; -#define STATS_TYPE_PORT BIT(0) -#define STATS_TYPE_BANK0 BIT(1) -#define STATS_TYPE_BANK1 BIT(2) - -struct mv88e6xxx_hw_stat { - char string[ETH_GSTRING_LEN]; - size_t size; - int reg; - int type; -}; - static inline bool mv88e6xxx_has_stu(struct mv88e6xxx_chip *chip) { return chip->info->max_sid > 0 && @@ -825,6 +843,4 @@ int mv88e6xxx_vtu_walk(struct mv88e6xxx_chip *chip, void *priv), void *priv); -int mv88e6xxx_fid_map(struct mv88e6xxx_chip *chip, unsigned long *bitmap); - #endif /* _MV88E6XXX_CHIP_H */ diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c index a08dab75e0c0..da69e0b85879 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.c +++ b/drivers/net/dsa/mv88e6xxx/devlink.c @@ -374,32 +374,20 @@ static int mv88e6xxx_region_atu_snapshot(struct devlink *dl, u8 **data) { struct dsa_switch *ds = dsa_devlink_to_ds(dl); - DECLARE_BITMAP(fid_bitmap, MV88E6XXX_N_FID); struct mv88e6xxx_devlink_atu_entry *table; struct mv88e6xxx_chip *chip = ds->priv; - int fid = -1, count, err; + int fid = -1, err = 0, count = 0; - table = kmalloc_array(mv88e6xxx_num_databases(chip), - sizeof(struct mv88e6xxx_devlink_atu_entry), - GFP_KERNEL); + table = kcalloc(mv88e6xxx_num_databases(chip), + sizeof(struct mv88e6xxx_devlink_atu_entry), + GFP_KERNEL); if (!table) return -ENOMEM; - memset(table, 0, mv88e6xxx_num_databases(chip) * - sizeof(struct mv88e6xxx_devlink_atu_entry)); - - count = 0; - mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_fid_map(chip, fid_bitmap); - if (err) { - kfree(table); - goto out; - } - while (1) { - fid = find_next_bit(fid_bitmap, MV88E6XXX_N_FID, fid + 1); + fid = find_next_bit(chip->fid_bitmap, MV88E6XXX_N_FID, fid + 1); if (fid == MV88E6XXX_N_FID) break; @@ -654,7 +642,7 @@ static struct mv88e6xxx_region_priv mv88e6xxx_region_global1_priv = { .id = MV88E6XXX_REGION_GLOBAL1, }; -static struct devlink_region_ops mv88e6xxx_region_global1_ops = { +static const struct devlink_region_ops mv88e6xxx_region_global1_ops = { .name = "global1", .snapshot = mv88e6xxx_region_global_snapshot, .destructor = kfree, @@ -665,32 +653,32 @@ static struct mv88e6xxx_region_priv mv88e6xxx_region_global2_priv = { .id = MV88E6XXX_REGION_GLOBAL2, }; -static struct devlink_region_ops mv88e6xxx_region_global2_ops = { +static const struct devlink_region_ops mv88e6xxx_region_global2_ops = { .name = "global2", .snapshot = mv88e6xxx_region_global_snapshot, .destructor = kfree, .priv = &mv88e6xxx_region_global2_priv, }; -static struct devlink_region_ops mv88e6xxx_region_atu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_atu_ops = { .name = "atu", .snapshot = mv88e6xxx_region_atu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_vtu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_vtu_ops = { .name = "vtu", .snapshot = mv88e6xxx_region_vtu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_stu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_stu_ops = { .name = "stu", .snapshot = mv88e6xxx_region_stu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_pvt_ops = { +static const struct devlink_region_ops mv88e6xxx_region_pvt_ops = { .name = "pvt", .snapshot = mv88e6xxx_region_pvt_snapshot, .destructor = kfree, @@ -703,13 +691,13 @@ static const struct devlink_port_region_ops mv88e6xxx_region_port_ops = { }; struct mv88e6xxx_region { - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; u64 size; bool (*cond)(struct mv88e6xxx_chip *chip); }; -static struct mv88e6xxx_region mv88e6xxx_regions[] = { +static const struct mv88e6xxx_region mv88e6xxx_regions[] = { [MV88E6XXX_REGION_GLOBAL1] = { .ops = &mv88e6xxx_region_global1_ops, .size = 32 * sizeof(u16) @@ -743,7 +731,8 @@ void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds) int i; for (i = 0; i < ARRAY_SIZE(mv88e6xxx_regions); i++) - dsa_devlink_region_destroy(chip->regions[i]); + if (chip->regions[i]) + dsa_devlink_region_destroy(chip->regions[i]); } void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port) @@ -774,7 +763,7 @@ int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds) { bool (*cond)(struct mv88e6xxx_chip *chip); struct mv88e6xxx_chip *chip = ds->priv; - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; struct devlink_region *region; u64 size; int i, j; diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c index 2fa55a643591..9820cd596757 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.c +++ b/drivers/net/dsa/mv88e6xxx/global1.c @@ -75,35 +75,93 @@ static int mv88e6xxx_g1_wait_init_ready(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_STS, bit, 1); } -void mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip) +static int mv88e6250_g1_eeprom_reload(struct mv88e6xxx_chip *chip) +{ + /* MV88E6185_G1_CTL1_RELOAD_EEPROM is also valid for 88E6250 */ + int bit = __bf_shf(MV88E6185_G1_CTL1_RELOAD_EEPROM); + u16 val; + int err; + + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val); + if (err) + return err; + + val |= MV88E6185_G1_CTL1_RELOAD_EEPROM; + + err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val); + if (err) + return err; + + return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_CTL1, bit, 0); +} + +/* Returns 0 when done, -EBUSY when waiting, other negative codes on error */ +static int mv88e6xxx_g1_is_eeprom_done(struct mv88e6xxx_chip *chip) { - const unsigned long timeout = jiffies + 1 * HZ; u16 val; int err; + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val); + if (err < 0) { + dev_err(chip->dev, "Error reading status"); + return err; + } + + /* If the switch is still resetting, it may not + * respond on the bus, and so MDIO read returns + * 0xffff. Differentiate between that, and waiting for + * the EEPROM to be done by bit 0 being set. + */ + if (val == 0xffff || !(val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE))) + return -EBUSY; + + return 0; +} + +/* As the EEInt (EEPROM done) flag clears on read if the status register, this + * function must be called directly after a hard reset or EEPROM ReLoad request, + * or the done condition may have been missed + */ +int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip) +{ + const unsigned long timeout = jiffies + 1 * HZ; + int ret; + /* Wait up to 1 second for the switch to finish reading the * EEPROM. */ while (time_before(jiffies, timeout)) { - err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val); - if (err) { - dev_err(chip->dev, "Error reading status"); - return; - } - - /* If the switch is still resetting, it may not - * respond on the bus, and so MDIO read returns - * 0xffff. Differentiate between that, and waiting for - * the EEPROM to be done by bit 0 being set. - */ - if (val != 0xffff && - val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE)) - return; - - usleep_range(1000, 2000); + ret = mv88e6xxx_g1_is_eeprom_done(chip); + if (ret != -EBUSY) + return ret; } dev_err(chip->dev, "Timeout waiting for EEPROM done"); + return -ETIMEDOUT; +} + +int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip) +{ + int ret; + + ret = mv88e6xxx_g1_is_eeprom_done(chip); + if (ret != -EBUSY) + return ret; + + /* Pre-reset, we don't know the state of the switch - when + * mv88e6xxx_g1_is_eeprom_done() returns -EBUSY, that may be because + * the switch is actually busy reading the EEPROM, or because + * MV88E6XXX_G1_STS_IRQ_EEPROM_DONE has been cleared by an unrelated + * status register read already. + * + * To account for the latter case, trigger another EEPROM reload for + * another chance at seeing the done flag. + */ + ret = mv88e6250_g1_eeprom_reload(chip); + if (ret) + return ret; + + return mv88e6xxx_g1_wait_eeprom_done(chip); } /* Offset 0x01: Switch MAC Address Register Bytes 0 & 1 @@ -493,8 +551,7 @@ int mv88e6390_g1_rmu_disable(struct mv88e6xxx_chip *chip) int mv88e6390_g1_stats_set_histogram(struct mv88e6xxx_chip *chip) { return mv88e6xxx_g1_ctl2_mask(chip, MV88E6390_G1_CTL2_HIST_MODE_MASK, - MV88E6390_G1_CTL2_HIST_MODE_RX | - MV88E6390_G1_CTL2_HIST_MODE_TX); + MV88E6390_G1_CTL2_HIST_MODE_RX); } int mv88e6xxx_g1_set_device_number(struct mv88e6xxx_chip *chip, int index) @@ -522,7 +579,7 @@ int mv88e6095_g1_stats_set_histogram(struct mv88e6xxx_chip *chip) if (err) return err; - val |= MV88E6XXX_G1_STATS_OP_HIST_RX_TX; + val |= MV88E6XXX_G1_STATS_OP_HIST_RX; err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, val); @@ -537,7 +594,7 @@ int mv88e6xxx_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port) err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_STATS_OP, MV88E6XXX_G1_STATS_OP_BUSY | MV88E6XXX_G1_STATS_OP_CAPTURE_PORT | - MV88E6XXX_G1_STATS_OP_HIST_RX_TX | port); + MV88E6XXX_G1_STATS_OP_HIST_RX | port); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h index c99ddd117fe6..3dbb7a1b8fe1 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -282,7 +282,8 @@ int mv88e6xxx_g1_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr); int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip); int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip); int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip); -void mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip); +int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip); +int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip); int mv88e6185_g1_ppu_enable(struct mv88e6xxx_chip *chip); int mv88e6185_g1_ppu_disable(struct mv88e6xxx_chip *chip); diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index ce3b3690c3c0..c47f068f56b3 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -457,7 +457,8 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) trace_mv88e6xxx_atu_full_violation(chip->dev, spid, entry.portvec, entry.mac, fid); - chip->ports[spid].atu_full_violation++; + if (spid < ARRAY_SIZE(chip->ports)) + chip->ports[spid].atu_full_violation++; } return IRQ_HANDLED; diff --git a/drivers/net/dsa/mv88e6xxx/global1_vtu.c b/drivers/net/dsa/mv88e6xxx/global1_vtu.c index bcfb4a812055..b524f27a2f0d 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_vtu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_vtu.c @@ -471,6 +471,9 @@ int mv88e6xxx_g1_vtu_flush(struct mv88e6xxx_chip *chip) { int err; + /* As part of the VTU flush, refresh FID map */ + bitmap_zero(chip->fid_bitmap, MV88E6XXX_N_FID); + err = mv88e6xxx_g1_vtu_op_wait(chip); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c index 937a01f2ba75..30a6ffa7817b 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.c +++ b/drivers/net/dsa/mv88e6xxx/global2.c @@ -340,7 +340,7 @@ int mv88e6xxx_g2_pot_clear(struct mv88e6xxx_chip *chip) * Offset 0x15: EEPROM Addr (for 8-bit data access) */ -static int mv88e6xxx_g2_eeprom_wait(struct mv88e6xxx_chip *chip) +int mv88e6xxx_g2_eeprom_wait(struct mv88e6xxx_chip *chip) { int bit = __bf_shf(MV88E6XXX_G2_EEPROM_CMD_BUSY); int err; @@ -1154,8 +1154,8 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip) if (err) return err; - chip->g2_irq.domain = irq_domain_add_simple( - chip->dev->of_node, 16, 0, &mv88e6xxx_g2_irq_domain_ops, chip); + chip->g2_irq.domain = irq_domain_create_simple(dev_fwnode(chip->dev), 16, 0, + &mv88e6xxx_g2_irq_domain_ops, chip); if (!chip->g2_irq.domain) return -ENOMEM; diff --git a/drivers/net/dsa/mv88e6xxx/global2.h b/drivers/net/dsa/mv88e6xxx/global2.h index 7e091965582b..82f9b410de0b 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.h +++ b/drivers/net/dsa/mv88e6xxx/global2.h @@ -365,6 +365,7 @@ int mv88e6xxx_g2_trunk_clear(struct mv88e6xxx_chip *chip); int mv88e6xxx_g2_device_mapping_write(struct mv88e6xxx_chip *chip, int target, int port); +int mv88e6xxx_g2_eeprom_wait(struct mv88e6xxx_chip *chip); extern const struct mv88e6xxx_irq_ops mv88e6097_watchdog_ops; extern const struct mv88e6xxx_irq_ops mv88e6250_watchdog_ops; @@ -377,8 +378,10 @@ extern const struct mv88e6xxx_avb_ops mv88e6390_avb_ops; extern const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops; -int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, +int mv88e6390_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, bool external); +int mv88e6393x_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, + bool external); int mv88e6352_g2_scratch_port_has_serdes(struct mv88e6xxx_chip *chip, int port); int mv88e6xxx_g2_atu_stats_set(struct mv88e6xxx_chip *chip, u16 kind, u16 bin); int mv88e6xxx_g2_atu_stats_get(struct mv88e6xxx_chip *chip, u16 *stats); diff --git a/drivers/net/dsa/mv88e6xxx/global2_scratch.c b/drivers/net/dsa/mv88e6xxx/global2_scratch.c index a9d6e40321a2..53a6d3ed63b3 100644 --- a/drivers/net/dsa/mv88e6xxx/global2_scratch.c +++ b/drivers/net/dsa/mv88e6xxx/global2_scratch.c @@ -146,7 +146,7 @@ static int mv88e6352_g2_scratch_gpio_set_data(struct mv88e6xxx_chip *chip, * @chip: chip private data * @pin: gpio index * - * Return: 0 for output, 1 for input (same as GPIOF_DIR_XXX). + * Return: 0 for output, 1 for input. */ static int mv88e6352_g2_scratch_gpio_get_dir(struct mv88e6xxx_chip *chip, unsigned int pin) @@ -240,7 +240,7 @@ const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops = { }; /** - * mv88e6xxx_g2_scratch_gpio_set_smi - set gpio muxing for external smi + * mv88e6390_g2_scratch_gpio_set_smi - set gpio muxing for external smi * @chip: chip private data * @external: set mux for external smi, or free for gpio usage * @@ -248,7 +248,7 @@ const struct mv88e6xxx_gpio_ops mv88e6352_gpio_ops = { * an external SMI interface, or they may be made free for other * GPIO uses. */ -int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, +int mv88e6390_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, bool external) { int misc_cfg = MV88E6352_G2_SCRATCH_MISC_CFG; @@ -291,6 +291,37 @@ int mv88e6xxx_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, } /** + * mv88e6393x_g2_scratch_gpio_set_smi - set gpio muxing for external smi + * @chip: chip private data + * @external: set mux for external smi, or free for gpio usage + * + * MV88E6191X/6193X/6393X GPIO pins 9 and 10 can be configured as an + * external SMI interface or as regular GPIO-s. + * + * They however have a different register layout then the existing + * function. + */ + +int mv88e6393x_g2_scratch_gpio_set_smi(struct mv88e6xxx_chip *chip, + bool external) +{ + int misc_cfg = MV88E6352_G2_SCRATCH_MISC_CFG; + int err; + u8 val; + + err = mv88e6xxx_g2_scratch_read(chip, misc_cfg, &val); + if (err) + return err; + + if (external) + val &= ~MV88E6352_G2_SCRATCH_MISC_CFG_NORMALSMI; + else + val |= MV88E6352_G2_SCRATCH_MISC_CFG_NORMALSMI; + + return mv88e6xxx_g2_scratch_write(chip, misc_cfg, val); +} + +/** * mv88e6352_g2_scratch_port_has_serdes - indicate if a port can have a serdes * @chip: chip private data * @port: port number to check for serdes diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.c b/drivers/net/dsa/mv88e6xxx/hwtstamp.c index 331b4ca089ff..6e6472a3b75a 100644 --- a/drivers/net/dsa/mv88e6xxx/hwtstamp.c +++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.c @@ -64,7 +64,7 @@ static int mv88e6xxx_ptp_read(struct mv88e6xxx_chip *chip, int addr, #define TX_TSTAMP_TIMEOUT msecs_to_jiffies(40) int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { const struct mv88e6xxx_ptp_ops *ptp_ops; struct mv88e6xxx_chip *chip; @@ -89,7 +89,7 @@ int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, } static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; @@ -169,42 +169,38 @@ static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port, } int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; - struct hwtstamp_config config; int err; if (!chip->info->ptp_support) return -EOPNOTSUPP; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - err = mv88e6xxx_set_hwtstamp_config(chip, port, &config); + err = mv88e6xxx_set_hwtstamp_config(chip, port, config); if (err) return err; /* Save the chosen configuration to be returned later. */ - memcpy(&ps->tstamp_config, &config, sizeof(config)); + ps->tstamp_config = *config; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; - struct hwtstamp_config *config = &ps->tstamp_config; if (!chip->info->ptp_support) return -EOPNOTSUPP; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + *config = ps->tstamp_config; + + return 0; } /* Returns a pointer to the PTP header if the caller should time stamp, @@ -574,7 +570,7 @@ int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip) } /* Set the ethertype of L2 PTP messages */ - err = mv88e6xxx_ptp_write(chip, MV88E6XXX_PTP_GC_ETYPE, ETH_P_1588); + err = mv88e6xxx_ptp_write(chip, MV88E6XXX_PTP_ETHERTYPE, ETH_P_1588); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.h b/drivers/net/dsa/mv88e6xxx/hwtstamp.h index cf7fb6d660b1..c359821d5a6e 100644 --- a/drivers/net/dsa/mv88e6xxx/hwtstamp.h +++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.h @@ -111,9 +111,10 @@ #ifdef CONFIG_NET_DSA_MV88E6XXX_PTP int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *cfg, + struct netlink_ext_ack *extack); int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *cfg); bool mv88e6xxx_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *clone, unsigned int type); @@ -121,8 +122,9 @@ void mv88e6xxx_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info); + struct kernel_ethtool_ts_info *info); +long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp); int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip); void mv88e6xxx_hwtstamp_free(struct mv88e6xxx_chip *chip); int mv88e6352_hwtstamp_port_enable(struct mv88e6xxx_chip *chip, int port); @@ -132,14 +134,17 @@ int mv88e6165_global_disable(struct mv88e6xxx_chip *chip); #else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */ -static inline int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, - int port, struct ifreq *ifr) +static inline int +mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { return -EOPNOTSUPP; } -static inline int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, - int port, struct ifreq *ifr) +static inline int +mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { return -EOPNOTSUPP; } @@ -157,7 +162,7 @@ static inline void mv88e6xxx_port_txtstamp(struct dsa_switch *ds, int port, } static inline int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { return -EOPNOTSUPP; } diff --git a/drivers/net/dsa/mv88e6xxx/leds.c b/drivers/net/dsa/mv88e6xxx/leds.c new file mode 100644 index 000000000000..ab3bc645da56 --- /dev/null +++ b/drivers/net/dsa/mv88e6xxx/leds.c @@ -0,0 +1,848 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +#include <linux/bitfield.h> +#include <linux/leds.h> +#include <linux/property.h> + +#include "chip.h" +#include "global2.h" +#include "port.h" + +/* Offset 0x16: LED control */ + +static int mv88e6xxx_port_led_write(struct mv88e6xxx_chip *chip, int port, u16 reg) +{ + reg |= MV88E6XXX_PORT_LED_CONTROL_UPDATE; + + return mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_LED_CONTROL, reg); +} + +static int mv88e6xxx_port_led_read(struct mv88e6xxx_chip *chip, int port, + u16 ptr, u16 *val) +{ + int err; + + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_LED_CONTROL, ptr); + if (err) + return err; + + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_LED_CONTROL, val); + *val &= 0x3ff; + + return err; +} + +static int mv88e6xxx_led_brightness_set(struct mv88e6xxx_port *p, int led, + int brightness) +{ + u16 reg; + int err; + + err = mv88e6xxx_port_led_read(p->chip, p->port, + MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL, + ®); + if (err) + return err; + + if (led == 1) + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK; + else + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK; + + if (brightness) { + /* Selector 0x0f == Force LED ON */ + if (led == 1) + reg |= MV88E6XXX_PORT_LED_CONTROL_LED1_SELF; + else + reg |= MV88E6XXX_PORT_LED_CONTROL_LED0_SELF; + } else { + /* Selector 0x0e == Force LED OFF */ + if (led == 1) + reg |= MV88E6XXX_PORT_LED_CONTROL_LED1_SELE; + else + reg |= MV88E6XXX_PORT_LED_CONTROL_LED0_SELE; + } + + reg |= MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL; + + return mv88e6xxx_port_led_write(p->chip, p->port, reg); +} + +static int mv88e6xxx_led0_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_brightness_set(p, 0, brightness); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +static int mv88e6xxx_led1_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_brightness_set(p, 1, brightness); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +struct mv88e6xxx_led_hwconfig { + int led; + u8 portmask; + unsigned long rules; + bool fiber; + bool blink_activity; + u16 selector; +}; + +/* The following is a lookup table to check what rules we can support on a + * certain LED given restrictions such as that some rules only work with fiber + * (SFP) connections and some blink on activity by default. + */ +#define MV88E6XXX_PORTS_0_3 (BIT(0) | BIT(1) | BIT(2) | BIT(3)) +#define MV88E6XXX_PORTS_4_5 (BIT(4) | BIT(5)) +#define MV88E6XXX_PORT_4 BIT(4) +#define MV88E6XXX_PORT_5 BIT(5) + +/* Entries are listed in selector order. + * + * These configurations vary across different switch families, list + * different tables per-family here. + */ +static const struct mv88e6xxx_led_hwconfig mv88e6352_led_hwconfigs[] = { + { + .led = 0, + .portmask = MV88E6XXX_PORT_4, + .rules = BIT(TRIGGER_NETDEV_LINK), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL0, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORT_5, + .rules = BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL0, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL1, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_100), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL1, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_4_5, + .rules = BIT(TRIGGER_NETDEV_LINK_100), + .blink_activity = true, + .fiber = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL1, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_4_5, + .rules = BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .fiber = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL1, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL2, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_100), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL2, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_4_5, + .rules = BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .fiber = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL2, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_4_5, + .rules = BIT(TRIGGER_NETDEV_LINK_100), + .blink_activity = true, + .fiber = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL2, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL3, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_1000), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL3, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_4_5, + .rules = BIT(TRIGGER_NETDEV_LINK), + .fiber = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL3, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORT_4, + .rules = BIT(TRIGGER_NETDEV_LINK), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL4, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORT_5, + .rules = BIT(TRIGGER_NETDEV_LINK), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL5, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_FULL_DUPLEX), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL6, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL6, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORT_4, + .rules = BIT(TRIGGER_NETDEV_FULL_DUPLEX), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL6, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORT_5, + .rules = BIT(TRIGGER_NETDEV_FULL_DUPLEX), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL6, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL7, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK_1000), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL7, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL8, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL8, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORT_5, + .rules = BIT(TRIGGER_NETDEV_LINK), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL8, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SEL9, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_100), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SEL9, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_10), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SELA, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_100), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SELA, + }, + { + .led = 0, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK_1000), + .selector = MV88E6XXX_PORT_LED_CONTROL_LED0_SELB, + }, + { + .led = 1, + .portmask = MV88E6XXX_PORTS_0_3, + .rules = BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK_1000), + .blink_activity = true, + .selector = MV88E6XXX_PORT_LED_CONTROL_LED1_SELB, + }, +}; + +/* mv88e6xxx_led_match_selector() - look up the appropriate LED mode selector + * @p: port state container + * @led: LED number, 0 or 1 + * @blink_activity: blink the LED (usually blink on indicated activity) + * @fiber: the link is connected to fiber such as SFP + * @rules: LED status flags from the LED classdev core + * @selector: fill in the selector in this parameter with an OR operation + */ +static int mv88e6xxx_led_match_selector(struct mv88e6xxx_port *p, int led, bool blink_activity, + bool fiber, unsigned long rules, u16 *selector) +{ + const struct mv88e6xxx_led_hwconfig *conf; + int i; + + /* No rules means we turn the LED off */ + if (!rules) { + if (led == 1) + *selector |= MV88E6XXX_PORT_LED_CONTROL_LED1_SELE; + else + *selector |= MV88E6XXX_PORT_LED_CONTROL_LED0_SELE; + return 0; + } + + /* TODO: these rules are for MV88E6352, when adding other families, + * think about making sure you select the table that match the + * specific switch family. + */ + for (i = 0; i < ARRAY_SIZE(mv88e6352_led_hwconfigs); i++) { + conf = &mv88e6352_led_hwconfigs[i]; + + if (conf->led != led) + continue; + + if (!(conf->portmask & BIT(p->port))) + continue; + + if (conf->blink_activity != blink_activity) + continue; + + if (conf->fiber != fiber) + continue; + + if (conf->rules == rules) { + dev_dbg(p->chip->dev, "port%d LED %d set selector %04x for rules %08lx\n", + p->port, led, conf->selector, rules); + *selector |= conf->selector; + return 0; + } + } + + return -EOPNOTSUPP; +} + +/* mv88e6xxx_led_match_selector() - find Linux netdev rules from a selector value + * @p: port state container + * @selector: the selector value from the LED actity register + * @led: LED number, 0 or 1 + * @rules: Linux netdev activity rules found from selector + */ +static int +mv88e6xxx_led_match_rule(struct mv88e6xxx_port *p, u16 selector, int led, unsigned long *rules) +{ + const struct mv88e6xxx_led_hwconfig *conf; + int i; + + /* Find the selector in the table, we just look for the right selector + * and ignore if the activity has special properties such as blinking + * or is fiber-only. + */ + for (i = 0; i < ARRAY_SIZE(mv88e6352_led_hwconfigs); i++) { + conf = &mv88e6352_led_hwconfigs[i]; + + if (conf->led != led) + continue; + + if (!(conf->portmask & BIT(p->port))) + continue; + + if (conf->selector == selector) { + dev_dbg(p->chip->dev, "port%d LED %d has selector %04x, rules %08lx\n", + p->port, led, selector, conf->rules); + *rules = conf->rules; + return 0; + } + } + + return -EINVAL; +} + +/* mv88e6xxx_led_get_selector() - get the appropriate LED mode selector + * @p: port state container + * @led: LED number, 0 or 1 + * @fiber: the link is connected to fiber such as SFP + * @rules: LED status flags from the LED classdev core + * @selector: fill in the selector in this parameter with an OR operation + */ +static int mv88e6xxx_led_get_selector(struct mv88e6xxx_port *p, int led, + bool fiber, unsigned long rules, u16 *selector) +{ + int err; + + /* What happens here is that we first try to locate a trigger with solid + * indicator (such as LED is on for a 1000 link) else we try a second + * sweep to find something suitable with a trigger that will blink on + * activity. + */ + err = mv88e6xxx_led_match_selector(p, led, false, fiber, rules, selector); + if (err) + return mv88e6xxx_led_match_selector(p, led, true, fiber, rules, selector); + + return 0; +} + +/* Sets up the hardware blinking period */ +static int mv88e6xxx_led_set_blinking_period(struct mv88e6xxx_port *p, int led, + unsigned long delay_on, unsigned long delay_off) +{ + unsigned long period; + u16 reg; + + period = delay_on + delay_off; + + reg = 0; + + switch (period) { + case 21: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_21MS; + break; + case 42: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_42MS; + break; + case 84: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_84MS; + break; + case 168: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_168MS; + break; + case 336: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_336MS; + break; + case 672: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_672MS; + break; + default: + /* Fall back to software blinking */ + return -EINVAL; + } + + /* This is essentially PWM duty cycle: how long time of the period + * will the LED be on. Zero isn't great in most cases. + */ + switch (delay_on) { + case 0: + /* This is usually pretty useless and will make the LED look OFF */ + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_NONE; + break; + case 21: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_21MS; + break; + case 42: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_42MS; + break; + case 84: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_84MS; + break; + case 168: + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_168MS; + break; + default: + /* Just use something non-zero */ + reg |= MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_21MS; + break; + } + + /* Set up blink rate */ + reg |= MV88E6XXX_PORT_LED_CONTROL_POINTER_STRETCH_BLINK; + + return mv88e6xxx_port_led_write(p->chip, p->port, reg); +} + +static int mv88e6xxx_led_blink_set(struct mv88e6xxx_port *p, int led, + unsigned long *delay_on, unsigned long *delay_off) +{ + u16 reg; + int err; + + /* Choose a sensible default 336 ms (~3 Hz) */ + if ((*delay_on == 0) && (*delay_off == 0)) { + *delay_on = 168; + *delay_off = 168; + } + + /* No off delay is just on */ + if (*delay_off == 0) + return mv88e6xxx_led_brightness_set(p, led, 1); + + err = mv88e6xxx_led_set_blinking_period(p, led, *delay_on, *delay_off); + if (err) + return err; + + err = mv88e6xxx_port_led_read(p->chip, p->port, + MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL, + ®); + if (err) + return err; + + if (led == 1) + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK; + else + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK; + + /* This will select the forced blinking status */ + if (led == 1) + reg |= MV88E6XXX_PORT_LED_CONTROL_LED1_SELD; + else + reg |= MV88E6XXX_PORT_LED_CONTROL_LED0_SELD; + + reg |= MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL; + + return mv88e6xxx_port_led_write(p->chip, p->port, reg); +} + +static int mv88e6xxx_led0_blink_set(struct led_classdev *ldev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_blink_set(p, 0, delay_on, delay_off); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +static int mv88e6xxx_led1_blink_set(struct led_classdev *ldev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_blink_set(p, 1, delay_on, delay_off); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +static int +mv88e6xxx_led0_hw_control_is_supported(struct led_classdev *ldev, unsigned long rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + u16 selector = 0; + + return mv88e6xxx_led_get_selector(p, 0, p->fiber, rules, &selector); +} + +static int +mv88e6xxx_led1_hw_control_is_supported(struct led_classdev *ldev, unsigned long rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + u16 selector = 0; + + return mv88e6xxx_led_get_selector(p, 1, p->fiber, rules, &selector); +} + +static int mv88e6xxx_led_hw_control_set(struct mv88e6xxx_port *p, + int led, unsigned long rules) +{ + u16 reg; + int err; + + err = mv88e6xxx_port_led_read(p->chip, p->port, + MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL, + ®); + if (err) + return err; + + if (led == 1) + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK; + else + reg &= ~MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK; + + err = mv88e6xxx_led_get_selector(p, led, p->fiber, rules, ®); + if (err) + return err; + + reg |= MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL; + + if (led == 0) + dev_dbg(p->chip->dev, "LED 0 hw control on port %d trigger selector 0x%02x\n", + p->port, + (unsigned int)(reg & MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK)); + else + dev_dbg(p->chip->dev, "LED 1 hw control on port %d trigger selector 0x%02x\n", + p->port, + (unsigned int)(reg & MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK) >> 4); + + return mv88e6xxx_port_led_write(p->chip, p->port, reg); +} + +static int +mv88e6xxx_led_hw_control_get(struct mv88e6xxx_port *p, int led, unsigned long *rules) +{ + u16 val; + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_port_led_read(p->chip, p->port, + MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL, &val); + mv88e6xxx_reg_unlock(p->chip); + if (err) + return err; + + /* Mask out the selector bits for this port */ + if (led == 1) { + val &= MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK; + /* It's forced blinking/OFF/ON */ + if (val == MV88E6XXX_PORT_LED_CONTROL_LED1_SELD || + val == MV88E6XXX_PORT_LED_CONTROL_LED1_SELE || + val == MV88E6XXX_PORT_LED_CONTROL_LED1_SELF) { + *rules = 0; + return 0; + } + } else { + val &= MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK; + /* It's forced blinking/OFF/ON */ + if (val == MV88E6XXX_PORT_LED_CONTROL_LED0_SELD || + val == MV88E6XXX_PORT_LED_CONTROL_LED0_SELE || + val == MV88E6XXX_PORT_LED_CONTROL_LED0_SELF) { + *rules = 0; + return 0; + } + } + + err = mv88e6xxx_led_match_rule(p, val, led, rules); + if (!err) + return 0; + + dev_dbg(p->chip->dev, "couldn't find matching selector for %04x\n", val); + *rules = 0; + return 0; +} + +static int +mv88e6xxx_led0_hw_control_set(struct led_classdev *ldev, unsigned long rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_hw_control_set(p, 0, rules); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +static int +mv88e6xxx_led1_hw_control_set(struct led_classdev *ldev, unsigned long rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + int err; + + mv88e6xxx_reg_lock(p->chip); + err = mv88e6xxx_led_hw_control_set(p, 1, rules); + mv88e6xxx_reg_unlock(p->chip); + + return err; +} + +static int +mv88e6xxx_led0_hw_control_get(struct led_classdev *ldev, unsigned long *rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + + return mv88e6xxx_led_hw_control_get(p, 0, rules); +} + +static int +mv88e6xxx_led1_hw_control_get(struct led_classdev *ldev, unsigned long *rules) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + + return mv88e6xxx_led_hw_control_get(p, 1, rules); +} + +static struct device *mv88e6xxx_led_hw_control_get_device(struct mv88e6xxx_port *p) +{ + struct dsa_port *dp; + + dp = dsa_to_port(p->chip->ds, p->port); + if (!dp) + return NULL; + if (dp->user) + return &dp->user->dev; + return NULL; +} + +static struct device * +mv88e6xxx_led0_hw_control_get_device(struct led_classdev *ldev) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led0); + + return mv88e6xxx_led_hw_control_get_device(p); +} + +static struct device * +mv88e6xxx_led1_hw_control_get_device(struct led_classdev *ldev) +{ + struct mv88e6xxx_port *p = container_of(ldev, struct mv88e6xxx_port, led1); + + return mv88e6xxx_led_hw_control_get_device(p); +} + +int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port) +{ + struct fwnode_handle *led = NULL, *leds = NULL; + struct led_init_data init_data = { }; + enum led_default_state state; + struct mv88e6xxx_port *p; + struct led_classdev *l; + struct device *dev; + u32 led_num; + int ret; + + /* LEDs are on ports 1,2,3,4, 5 and 6 (index 0..5), no more */ + if (port > 5) + return -EOPNOTSUPP; + + p = &chip->ports[port]; + if (!p->fwnode) + return 0; + + dev = chip->dev; + + leds = fwnode_get_named_child_node(p->fwnode, "leds"); + if (!leds) { + dev_dbg(dev, "No Leds node specified in device tree for port %d!\n", + port); + return 0; + } + + fwnode_for_each_child_node(leds, led) { + /* Reg represent the led number of the port, max 2 + * LEDs can be connected to each port, in some designs + * only one LED is connected. + */ + if (fwnode_property_read_u32(led, "reg", &led_num)) + continue; + if (led_num > 1) { + dev_err(dev, "invalid LED specified port %d\n", port); + ret = -EINVAL; + goto err_put_led; + } + + if (led_num == 0) + l = &p->led0; + else + l = &p->led1; + + state = led_init_default_state_get(led); + switch (state) { + case LEDS_DEFSTATE_ON: + l->brightness = 1; + mv88e6xxx_led_brightness_set(p, led_num, 1); + break; + case LEDS_DEFSTATE_KEEP: + break; + default: + l->brightness = 0; + mv88e6xxx_led_brightness_set(p, led_num, 0); + } + + l->max_brightness = 1; + if (led_num == 0) { + l->brightness_set_blocking = mv88e6xxx_led0_brightness_set_blocking; + l->blink_set = mv88e6xxx_led0_blink_set; + l->hw_control_is_supported = mv88e6xxx_led0_hw_control_is_supported; + l->hw_control_set = mv88e6xxx_led0_hw_control_set; + l->hw_control_get = mv88e6xxx_led0_hw_control_get; + l->hw_control_get_device = mv88e6xxx_led0_hw_control_get_device; + } else { + l->brightness_set_blocking = mv88e6xxx_led1_brightness_set_blocking; + l->blink_set = mv88e6xxx_led1_blink_set; + l->hw_control_is_supported = mv88e6xxx_led1_hw_control_is_supported; + l->hw_control_set = mv88e6xxx_led1_hw_control_set; + l->hw_control_get = mv88e6xxx_led1_hw_control_get; + l->hw_control_get_device = mv88e6xxx_led1_hw_control_get_device; + } + l->hw_control_trigger = "netdev"; + + init_data.default_label = ":port"; + init_data.fwnode = led; + init_data.devname_mandatory = true; + init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d:0%d", chip->info->name, + port, led_num); + if (!init_data.devicename) { + ret = -ENOMEM; + goto err_put_led; + } + + ret = devm_led_classdev_register_ext(dev, l, &init_data); + kfree(init_data.devicename); + + if (ret) { + dev_err(dev, "Failed to init LED %d for port %d", led_num, port); + goto err_put_led; + } + } + + fwnode_handle_put(leds); + return 0; + +err_put_led: + fwnode_handle_put(led); + fwnode_handle_put(leds); + return ret; +} diff --git a/drivers/net/dsa/mv88e6xxx/pcs-6185.c b/drivers/net/dsa/mv88e6xxx/pcs-6185.c index 4d677f836807..af7e06d265f7 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-6185.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-6185.c @@ -55,6 +55,7 @@ static irqreturn_t mv88e6185_pcs_handle_irq(int irq, void *dev_id) } static void mv88e6185_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e6185_pcs *mpcs = pcs_to_mv88e6185_pcs(pcs); @@ -95,7 +96,7 @@ static void mv88e6185_pcs_get_state(struct phylink_pcs *pcs, } } -static int mv88e6185_pcs_config(struct phylink_pcs *pcs, unsigned int mode, +static int mv88e6185_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac) diff --git a/drivers/net/dsa/mv88e6xxx/pcs-6352.c b/drivers/net/dsa/mv88e6xxx/pcs-6352.c index 88f624b65470..36993400837e 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-6352.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-6352.c @@ -158,6 +158,7 @@ static void marvell_c22_pcs_disable(struct phylink_pcs *pcs) } static void marvell_c22_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct marvell_c22_pcs *mpcs = pcs_to_marvell_c22_pcs(pcs); @@ -274,7 +275,6 @@ static struct marvell_c22_pcs *marvell_c22_pcs_alloc(struct device *dev, mpcs->mdio.bus = bus; mpcs->mdio.addr = addr; mpcs->phylink_pcs.ops = &marvell_c22_pcs_ops; - mpcs->phylink_pcs.neg_mode = true; return mpcs; } diff --git a/drivers/net/dsa/mv88e6xxx/pcs-639x.c b/drivers/net/dsa/mv88e6xxx/pcs-639x.c index ba373656bfe1..5db17c0b77f5 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-639x.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-639x.c @@ -9,6 +9,7 @@ #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/mii.h> +#include <linux/string_choices.h> #include "chip.h" #include "global2.h" @@ -208,7 +209,7 @@ static void mv88e639x_sgmii_pcs_pre_config(struct phylink_pcs *pcs, static int mv88e6390_erratum_3_14(struct mv88e639x_pcs *mpcs) { - const int lanes[] = { MV88E6390_PORT9_LANE0, MV88E6390_PORT9_LANE1, + static const int lanes[] = { MV88E6390_PORT9_LANE0, MV88E6390_PORT9_LANE1, MV88E6390_PORT9_LANE2, MV88E6390_PORT9_LANE3, MV88E6390_PORT10_LANE0, MV88E6390_PORT10_LANE1, MV88E6390_PORT10_LANE2, MV88E6390_PORT10_LANE3 }; @@ -257,6 +258,7 @@ static int mv88e639x_sgmii_pcs_post_config(struct phylink_pcs *pcs, } static void mv88e639x_sgmii_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e639x_pcs *mpcs = sgmii_pcs_to_mv88e639x_pcs(pcs); @@ -395,6 +397,7 @@ static void mv88e639x_xg_pcs_disable(struct mv88e639x_pcs *mpcs) } static void mv88e639x_xg_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); @@ -465,6 +468,7 @@ mv88e639x_pcs_select(struct mv88e6xxx_chip *chip, int port, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_XAUI: case PHY_INTERFACE_MODE_RXAUI: + case PHY_INTERFACE_MODE_USXGMII: return &mpcs->xg_pcs; default: @@ -561,9 +565,7 @@ static int mv88e6390_pcs_init(struct mv88e6xxx_chip *chip, int port) return -ENOMEM; mpcs->sgmii_pcs.ops = &mv88e639x_sgmii_pcs_ops; - mpcs->sgmii_pcs.neg_mode = true; mpcs->xg_pcs.ops = &mv88e6390_xg_pcs_ops; - mpcs->xg_pcs.neg_mode = true; if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6190X || chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6390X) @@ -747,7 +749,7 @@ static int mv88e6393x_sgmii_apply_2500basex_an(struct mv88e639x_pcs *mpcs, if (err) dev_err(mpcs->mdio.dev.parent, "failed to %s 2500basex fix: %pe\n", - enable ? "enable" : "disable", ERR_PTR(err)); + str_enable_disable(enable), ERR_PTR(err)); return err; } @@ -873,7 +875,8 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); int err; - if (interface == PHY_INTERFACE_MODE_10GBASER) { + if (interface == PHY_INTERFACE_MODE_10GBASER || + interface == PHY_INTERFACE_MODE_USXGMII) { err = mv88e6393x_erratum_5_2(mpcs); if (err) return err; @@ -886,12 +889,38 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, return mv88e639x_xg_pcs_enable(mpcs); } +static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, + struct phylink_link_state *state) +{ + struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); + u16 status, lp_status; + int err; + + if (state->interface != PHY_INTERFACE_MODE_USXGMII) + return mv88e639x_xg_pcs_get_state(pcs, neg_mode, state); + + state->link = false; + + err = mv88e639x_read(mpcs, MV88E6390_USXGMII_PHY_STATUS, &status); + err = err ? : mv88e639x_read(mpcs, MV88E6390_USXGMII_LP_STATUS, &lp_status); + if (err) { + dev_err(mpcs->mdio.dev.parent, + "can't read USXGMII status: %pe\n", ERR_PTR(err)); + return; + } + + state->link = !!(status & MDIO_USXGMII_LINK); + state->an_complete = state->link; + phylink_decode_usxgmii_word(state, lp_status); +} + static const struct phylink_pcs_ops mv88e6393x_xg_pcs_ops = { .pcs_enable = mv88e6393x_xg_pcs_enable, .pcs_disable = mv88e6393x_xg_pcs_disable, .pcs_pre_config = mv88e6393x_xg_pcs_pre_config, .pcs_post_config = mv88e6393x_xg_pcs_post_config, - .pcs_get_state = mv88e639x_xg_pcs_get_state, + .pcs_get_state = mv88e6393x_xg_pcs_get_state, .pcs_config = mv88e639x_xg_pcs_config, }; @@ -914,9 +943,7 @@ static int mv88e6393x_pcs_init(struct mv88e6xxx_chip *chip, int port) return -ENOMEM; mpcs->sgmii_pcs.ops = &mv88e6393x_sgmii_pcs_ops; - mpcs->sgmii_pcs.neg_mode = true; mpcs->xg_pcs.ops = &mv88e6393x_xg_pcs_ops; - mpcs->xg_pcs.neg_mode = true; mpcs->supports_5g = true; err = mv88e6393x_erratum_4_6(mpcs); diff --git a/drivers/net/dsa/mv88e6xxx/phy.c b/drivers/net/dsa/mv88e6xxx/phy.c index 8bb88b3d900d..4e7827ee684a 100644 --- a/drivers/net/dsa/mv88e6xxx/phy.c +++ b/drivers/net/dsa/mv88e6xxx/phy.c @@ -182,7 +182,7 @@ static void mv88e6xxx_phy_ppu_reenable_work(struct work_struct *ugly) static void mv88e6xxx_phy_ppu_reenable_timer(struct timer_list *t) { - struct mv88e6xxx_chip *chip = from_timer(chip, t, ppu_timer); + struct mv88e6xxx_chip *chip = timer_container_of(chip, t, ppu_timer); schedule_work(&chip->ppu_work); } @@ -206,7 +206,7 @@ static int mv88e6xxx_phy_ppu_access_get(struct mv88e6xxx_chip *chip) } chip->ppu_disabled = 1; } else { - del_timer(&chip->ppu_timer); + timer_delete(&chip->ppu_timer); ret = 0; } @@ -229,7 +229,10 @@ static void mv88e6xxx_phy_ppu_state_init(struct mv88e6xxx_chip *chip) static void mv88e6xxx_phy_ppu_state_destroy(struct mv88e6xxx_chip *chip) { - del_timer_sync(&chip->ppu_timer); + mutex_lock(&chip->ppu_mutex); + timer_delete_sync(&chip->ppu_timer); + cancel_work_sync(&chip->ppu_work); + mutex_unlock(&chip->ppu_mutex); } int mv88e6185_phy_ppu_read(struct mv88e6xxx_chip *chip, struct mii_bus *bus, diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index 5394a8cf7bf1..66b1b7277281 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -12,6 +12,8 @@ #include <linux/if_bridge.h> #include <linux/phy.h> #include <linux/phylink.h> +#include <linux/property.h> +#include <linux/string_choices.h> #include "chip.h" #include "global2.h" @@ -175,7 +177,7 @@ int mv88e6xxx_port_set_link(struct mv88e6xxx_chip *chip, int port, int link) dev_dbg(chip->dev, "p%d: %s link %s\n", port, reg & MV88E6XXX_PORT_MAC_CTL_FORCE_LINK ? "Force" : "Unforce", - reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP ? "up" : "down"); + str_up_down(reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP)); return 0; } @@ -1713,6 +1715,7 @@ int mv88e6393x_port_set_policy(struct mv88e6xxx_chip *chip, int port, ptr = shift / 8; shift %= 8; mask >>= ptr * 8; + ptr <<= 8; err = mv88e6393x_port_policy_read(chip, port, ptr, ®); if (err) diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h index 86deeb347cbc..c1d2f99efb1c 100644 --- a/drivers/net/dsa/mv88e6xxx/port.h +++ b/drivers/net/dsa/mv88e6xxx/port.h @@ -25,10 +25,25 @@ #define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900 #define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00 #define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00 -#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00 -#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00 -#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00 -#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00 +/* - Modes with PHY suffix use output instead of input clock + * - Modes without RMII or RGMII use MII + * - Modes without speed do not have a fixed speed specified in the manual + * ("DC to x MHz" - variable clock support?) + */ +#define MV88E6250_PORT_STS_PORTMODE_MII_DISABLED 0x0000 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII 0x0100 +#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY 0x0200 +#define MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY 0x0400 +#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL 0x0600 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL 0x0700 +#define MV88E6250_PORT_STS_PORTMODE_MII_HALF 0x0800 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY 0x0900 +#define MV88E6250_PORT_STS_PORTMODE_MII_FULL 0x0a00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY 0x0b00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY 0x0c00 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY 0x0d00 +#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY 0x0e00 +#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY 0x0f00 #define MV88E6XXX_PORT_STS_LINK 0x0800 #define MV88E6XXX_PORT_STS_DUPLEX 0x0400 #define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300 @@ -294,6 +309,130 @@ /* Offset 0x13: OutFiltered Counter */ #define MV88E6XXX_PORT_OUT_FILTERED 0x13 +/* Offset 0x16: LED Control */ +#define MV88E6XXX_PORT_LED_CONTROL 0x16 +#define MV88E6XXX_PORT_LED_CONTROL_UPDATE BIT(15) +#define MV88E6XXX_PORT_LED_CONTROL_POINTER_MASK GENMASK(14, 12) +#define MV88E6XXX_PORT_LED_CONTROL_POINTER_LED01_CTRL (0x00 << 12) /* Control for LED 0 and 1 */ +#define MV88E6XXX_PORT_LED_CONTROL_POINTER_STRETCH_BLINK (0x06 << 12) /* Stetch and Blink Rate */ +#define MV88E6XXX_PORT_LED_CONTROL_POINTER_CNTL_SPECIAL (0x07 << 12) /* Control for the Port's Special LED */ +#define MV88E6XXX_PORT_LED_CONTROL_DATA_MASK GENMASK(10, 0) +/* Selection masks valid for either port 1,2,3,4 or 5 */ +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL_MASK GENMASK(3, 0) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL_MASK GENMASK(7, 4) +/* Selection control for LED 0 and 1, ports 5 and 6 only has LED 0 + * Bits Function + * 0..3 LED 0 control selector on ports 1-5 + * 4..7 LED 1 control selector on ports 1-4 on port 5 this controls LED 0 of port 6 + * + * Sel Port LED Function for the 6352 family: + * 0 1-4 0 Link/Act/Speed by Blink Rate (off=no link, on=link, blink=activity, blink speed=link speed) + * 1-4 1 Port 2's Special LED + * 5-6 0 Port 5 Link/Act (off=no link, on=link, blink=activity) + * 5-6 1 Port 6 Link/Act (off=no link, on=link 1000, blink=activity) + * 1 1-4 0 100/1000 Link/Act (off=no link, on=100 or 1000 link, blink=activity) + * 1-4 1 10/100 Link Act (off=no link, on=10 or 100 link, blink=activity) + * 5-6 0 Fiber 100 Link/Act (off=no link, on=link 100, blink=activity) + * 5-6 1 Fiber 1000 Link/Act (off=no link, on=link 1000, blink=activity) + * 2 1-4 0 1000 Link/Act (off=no link, on=link 1000, blink=activity) + * 1-4 1 10/100 Link/Act (off=no link, on=10 or 100 link, blink=activity) + * 5-6 0 Fiber 1000 Link/Act (off=no link, on=link 1000, blink=activity) + * 5-6 1 Fiber 100 Link/Act (off=no link, on=link 100, blink=activity) + * 3 1-4 0 Link/Act (off=no link, on=link, blink=activity) + * 1-4 1 1000 Link (off=no link, on=1000 link) + * 5-6 0 Port 0's Special LED + * 5-6 1 Fiber Link (off=no link, on=link) + * 4 1-4 0 Port 0's Special LED + * 1-4 1 Port 1's Special LED + * 5-6 0 Port 1's Special LED + * 5-6 1 Port 5 Link/Act (off=no link, on=link, blink=activity) + * 5 1-4 0 Reserved + * 1-4 1 Reserved + * 5-6 0 Port 2's Special LED + * 5-6 1 Port 6 Link (off=no link, on=link) + * 6 1-4 0 Duplex/Collision (off=half-duplex,on=full-duplex,blink=collision) + * 1-4 1 10/1000 Link/Act (off=no link, on=10 or 1000 link, blink=activity) + * 5-6 0 Port 5 Duplex/Collision (off=half-duplex, on=full-duplex, blink=col) + * 5-6 1 Port 6 Duplex/Collision (off=half-duplex, on=full-duplex, blink=col) + * 7 1-4 0 10/1000 Link/Act (off=no link, on=10 or 1000 link, blink=activity) + * 1-4 1 10/1000 Link (off=no link, on=10 or 1000 link) + * 5-6 0 Port 5 Link/Act/Speed by Blink rate (off=no link, on=link, blink=activity, blink speed=link speed) + * 5-6 1 Port 6 Link/Act/Speed by Blink rate (off=no link, on=link, blink=activity, blink speed=link speed) + * 8 1-4 0 Link (off=no link, on=link) + * 1-4 1 Activity (off=no link, blink on=activity) + * 5-6 0 Port 6 Link/Act (off=no link, on=link, blink=activity) + * 5-6 1 Port 0's Special LED + * 9 1-4 0 10 Link (off=no link, on=10 link) + * 1-4 1 100 Link (off=no link, on=100 link) + * 5-6 0 Reserved + * 5-6 1 Port 1's Special LED + * a 1-4 0 10 Link/Act (off=no link, on=10 link, blink=activity) + * 1-4 1 100 Link/Act (off=no link, on=100 link, blink=activity) + * 5-6 0 Reserved + * 5-6 1 Port 2's Special LED + * b 1-4 0 100/1000 Link (off=no link, on=100 or 1000 link) + * 1-4 1 10/100 Link (off=no link, on=100 link, blink=activity) + * 5-6 0 Reserved + * 5-6 1 Reserved + * c * * PTP Act (blink on=PTP activity) + * d * * Force Blink + * e * * Force Off + * f * * Force On + */ +/* Select LED0 output */ +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL0 0x0 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL1 0x1 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL2 0x2 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL3 0x3 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL4 0x4 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL5 0x5 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL6 0x6 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL7 0x7 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL8 0x8 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SEL9 0x9 +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELA 0xa +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELB 0xb +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELC 0xc +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELD 0xd +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELE 0xe +#define MV88E6XXX_PORT_LED_CONTROL_LED0_SELF 0xf +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL0 (0x0 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL1 (0x1 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL2 (0x2 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL3 (0x3 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL4 (0x4 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL5 (0x5 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL6 (0x6 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL7 (0x7 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL8 (0x8 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SEL9 (0x9 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELA (0xa << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELB (0xb << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELC (0xc << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELD (0xd << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELE (0xe << 4) +#define MV88E6XXX_PORT_LED_CONTROL_LED1_SELF (0xf << 4) +/* Stretch and Blink Rate Control (Index 0x06 of LED Control) */ +/* Pulse Stretch Selection for all LED's on this port */ +#define MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_NONE (0 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_21MS (1 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_42MS (2 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_84MS (3 << 4) +#define MV88E6XXX_PORT_LED_CONTROL_0x06_PULSE_STRETCH_168MS (4 << 4) +/* Blink Rate Selection for all LEDs on this port */ +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_21MS 0 +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_42MS 1 +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_84MS 2 +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_168MS 3 +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_336MS 4 +#define MV88E6XXX_PORT_LED_CONTROL_0x06_BLINK_RATE_672MS 5 + /* Control for Special LED (Index 0x7 of LED Control on Port0) */ +#define MV88E6XXX_PORT_LED_CONTROL_0x07_P0_LAN_LINKACT_SHIFT 0 /* bits 6:0 LAN Link Activity LED */ +/* Control for Special LED (Index 0x7 of LED Control on Port 1) */ +#define MV88E6XXX_PORT_LED_CONTROL_0x07_P1_WAN_LINKACT_SHIFT 0 /* bits 6:0 WAN Link Activity LED */ +/* Control for Special LED (Index 0x7 of LED Control on Port 2) */ +#define MV88E6XXX_PORT_LED_CONTROL_0x07_P2_PTP_ACT 0 /* bits 6:0 PTP Activity */ + /* Offset 0x18: IEEE Priority Mapping Table */ #define MV88E6390_PORT_IEEE_PRIO_MAP_TABLE 0x18 #define MV88E6390_PORT_IEEE_PRIO_MAP_TABLE_UPDATE 0x8000 @@ -442,6 +581,15 @@ int mv88e6393x_port_set_cmode(struct mv88e6xxx_chip *chip, int port, phy_interface_t mode); int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode); int mv88e6352_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode); +#ifdef CONFIG_NET_DSA_MV88E6XXX_LEDS +int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port); +#else +static inline int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, + int port) +{ + return 0; +} +#endif int mv88e6xxx_port_drop_untagged(struct mv88e6xxx_chip *chip, int port, bool drop_untagged); int mv88e6xxx_port_set_map_da(struct mv88e6xxx_chip *chip, int port, bool map); diff --git a/drivers/net/dsa/mv88e6xxx/ptp.c b/drivers/net/dsa/mv88e6xxx/ptp.c index ea17231dc34e..f7603573d3a9 100644 --- a/drivers/net/dsa/mv88e6xxx/ptp.c +++ b/drivers/net/dsa/mv88e6xxx/ptp.c @@ -18,6 +18,13 @@ #define MV88E6XXX_MAX_ADJ_PPB 1000000 +struct mv88e6xxx_cc_coeffs { + u32 cc_shift; + u32 cc_mult; + u32 cc_mult_num; + u32 cc_mult_dem; +}; + /* Family MV88E6250: * Raw timestamps are in units of 10-ns clock periods. * @@ -25,22 +32,43 @@ * simplifies to * clkadj = scaled_ppm * 2^7 / 5^5 */ -#define MV88E6250_CC_SHIFT 28 -#define MV88E6250_CC_MULT (10 << MV88E6250_CC_SHIFT) -#define MV88E6250_CC_MULT_NUM (1 << 7) -#define MV88E6250_CC_MULT_DEM 3125ULL +#define MV88E6XXX_CC_10NS_SHIFT 28 +static const struct mv88e6xxx_cc_coeffs mv88e6xxx_cc_10ns_coeffs = { + .cc_shift = MV88E6XXX_CC_10NS_SHIFT, + .cc_mult = 10 << MV88E6XXX_CC_10NS_SHIFT, + .cc_mult_num = 1 << 7, + .cc_mult_dem = 3125ULL, +}; -/* Other families: +/* Other families except MV88E6393X in internal clock mode: * Raw timestamps are in units of 8-ns clock periods. * * clkadj = scaled_ppm * 8*2^28 / (10^6 * 2^16) * simplifies to * clkadj = scaled_ppm * 2^9 / 5^6 */ -#define MV88E6XXX_CC_SHIFT 28 -#define MV88E6XXX_CC_MULT (8 << MV88E6XXX_CC_SHIFT) -#define MV88E6XXX_CC_MULT_NUM (1 << 9) -#define MV88E6XXX_CC_MULT_DEM 15625ULL +#define MV88E6XXX_CC_8NS_SHIFT 28 +static const struct mv88e6xxx_cc_coeffs mv88e6xxx_cc_8ns_coeffs = { + .cc_shift = MV88E6XXX_CC_8NS_SHIFT, + .cc_mult = 8 << MV88E6XXX_CC_8NS_SHIFT, + .cc_mult_num = 1 << 9, + .cc_mult_dem = 15625ULL +}; + +/* Family MV88E6393X using internal clock: + * Raw timestamps are in units of 4-ns clock periods. + * + * clkadj = scaled_ppm * 4*2^28 / (10^6 * 2^16) + * simplifies to + * clkadj = scaled_ppm * 2^8 / 5^6 + */ +#define MV88E6XXX_CC_4NS_SHIFT 28 +static const struct mv88e6xxx_cc_coeffs mv88e6xxx_cc_4ns_coeffs = { + .cc_shift = MV88E6XXX_CC_4NS_SHIFT, + .cc_mult = 4 << MV88E6XXX_CC_4NS_SHIFT, + .cc_mult_num = 1 << 8, + .cc_mult_dem = 15625ULL +}; #define TAI_EVENT_WORK_INTERVAL msecs_to_jiffies(100) @@ -83,13 +111,40 @@ static int mv88e6352_set_gpio_func(struct mv88e6xxx_chip *chip, int pin, return chip->info->ops->gpio_ops->set_pctl(chip, pin, func); } -static u64 mv88e6352_ptp_clock_read(const struct cyclecounter *cc) +static const struct mv88e6xxx_cc_coeffs * +mv88e6xxx_cc_coeff_get(struct mv88e6xxx_chip *chip) +{ + u16 period_ps; + int err; + + err = mv88e6xxx_tai_read(chip, MV88E6XXX_TAI_CLOCK_PERIOD, &period_ps, 1); + if (err) { + dev_err(chip->dev, "failed to read cycle counter period: %d\n", + err); + return ERR_PTR(err); + } + + switch (period_ps) { + case 4000: + return &mv88e6xxx_cc_4ns_coeffs; + case 8000: + return &mv88e6xxx_cc_8ns_coeffs; + case 10000: + return &mv88e6xxx_cc_10ns_coeffs; + default: + dev_err(chip->dev, "unexpected cycle counter period of %u ps\n", + period_ps); + return ERR_PTR(-ENODEV); + } +} + +static u64 mv88e6352_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); u16 phc_time[2]; int err; - err = mv88e6xxx_tai_read(chip, MV88E6XXX_TAI_TIME_LO, phc_time, + err = mv88e6xxx_tai_read(chip, MV88E6352_TAI_TIME_LO, phc_time, ARRAY_SIZE(phc_time)); if (err) return 0; @@ -97,13 +152,13 @@ static u64 mv88e6352_ptp_clock_read(const struct cyclecounter *cc) return ((u32)phc_time[1] << 16) | phc_time[0]; } -static u64 mv88e6165_ptp_clock_read(const struct cyclecounter *cc) +static u64 mv88e6165_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); u16 phc_time[2]; int err; - err = mv88e6xxx_tai_read(chip, MV88E6XXX_PTP_GC_TIME_LO, phc_time, + err = mv88e6xxx_tai_read(chip, MV88E6165_PTP_GC_TIME_LO, phc_time, ARRAY_SIZE(phc_time)); if (err) return 0; @@ -112,42 +167,26 @@ static u64 mv88e6165_ptp_clock_read(const struct cyclecounter *cc) } /* mv88e6352_config_eventcap - configure TAI event capture - * @event: PTP_CLOCK_PPS (internal) or PTP_CLOCK_EXTTS (external) * @rising: zero for falling-edge trigger, else rising-edge trigger * * This will also reset the capture sequence counter. */ -static int mv88e6352_config_eventcap(struct mv88e6xxx_chip *chip, int event, - int rising) +static int mv88e6352_config_eventcap(struct mv88e6xxx_chip *chip, int rising) { - u16 global_config; - u16 cap_config; + u16 evcap_config; int err; - chip->evcap_config = MV88E6XXX_TAI_CFG_CAP_OVERWRITE | - MV88E6XXX_TAI_CFG_CAP_CTR_START; + evcap_config = MV88E6352_TAI_CFG_CAP_OVERWRITE | + MV88E6352_TAI_CFG_CAP_CTR_START; if (!rising) - chip->evcap_config |= MV88E6XXX_TAI_CFG_EVREQ_FALLING; + evcap_config |= MV88E6352_TAI_CFG_EVREQ_FALLING; - global_config = (chip->evcap_config | chip->trig_config); - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_CFG, global_config); + err = mv88e6xxx_tai_write(chip, MV88E6352_TAI_CFG, evcap_config); if (err) return err; - if (event == PTP_CLOCK_PPS) { - cap_config = MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG; - } else if (event == PTP_CLOCK_EXTTS) { - /* if STATUS_CAP_TRIG is unset we capture PTP_EVREQ events */ - cap_config = 0; - } else { - return -EINVAL; - } - /* Write the capture config; this also clears the capture counter */ - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_EVENT_STATUS, - cap_config); - - return err; + return mv88e6xxx_tai_write(chip, MV88E6352_TAI_EVENT_STATUS, 0); } static void mv88e6352_tai_event_work(struct work_struct *ugly) @@ -160,7 +199,7 @@ static void mv88e6352_tai_event_work(struct work_struct *ugly) int err; mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_tai_read(chip, MV88E6XXX_TAI_EVENT_STATUS, + err = mv88e6xxx_tai_read(chip, MV88E6352_TAI_EVENT_STATUS, status, ARRAY_SIZE(status)); mv88e6xxx_reg_unlock(chip); @@ -168,20 +207,24 @@ static void mv88e6352_tai_event_work(struct work_struct *ugly) dev_err(chip->dev, "failed to read TAI status register\n"); return; } - if (status[0] & MV88E6XXX_TAI_EVENT_STATUS_ERROR) { + if (status[0] & MV88E6352_TAI_EVENT_STATUS_ERROR) { dev_warn(chip->dev, "missed event capture\n"); return; } - if (!(status[0] & MV88E6XXX_TAI_EVENT_STATUS_VALID)) + if (!(status[0] & MV88E6352_TAI_EVENT_STATUS_VALID)) goto out; raw_ts = ((u32)status[2] << 16) | status[1]; /* Clear the valid bit so the next timestamp can come in */ - status[0] &= ~MV88E6XXX_TAI_EVENT_STATUS_VALID; + status[0] &= ~MV88E6352_TAI_EVENT_STATUS_VALID; mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_EVENT_STATUS, status[0]); + err = mv88e6xxx_tai_write(chip, MV88E6352_TAI_EVENT_STATUS, status[0]); mv88e6xxx_reg_unlock(chip); + if (err) { + dev_err(chip->dev, "failed to write TAI status register\n"); + return; + } /* This is an external timestamp */ ev.type = PTP_CLOCK_EXTTS; @@ -200,7 +243,6 @@ out: static int mv88e6xxx_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) { struct mv88e6xxx_chip *chip = ptp_to_chip(ptp); - const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops; int neg_adj = 0; u32 diff, mult; u64 adj; @@ -210,10 +252,10 @@ static int mv88e6xxx_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) scaled_ppm = -scaled_ppm; } - mult = ptp_ops->cc_mult; - adj = ptp_ops->cc_mult_num; + mult = chip->cc_coeffs->cc_mult; + adj = chip->cc_coeffs->cc_mult_num; adj *= scaled_ppm; - diff = div_u64(adj, ptp_ops->cc_mult_dem); + diff = div_u64(adj, chip->cc_coeffs->cc_mult_dem); mv88e6xxx_reg_lock(chip); @@ -274,13 +316,6 @@ static int mv88e6352_ptp_enable_extts(struct mv88e6xxx_chip *chip, int pin; int err; - /* Reject requests with unsupported flags */ - if (rq->extts.flags & ~(PTP_ENABLE_FEATURE | - PTP_RISING_EDGE | - PTP_FALLING_EDGE | - PTP_STRICT_FLAGS)) - return -EOPNOTSUPP; - /* Reject requests to enable time stamping on both edges. */ if ((rq->extts.flags & PTP_STRICT_FLAGS) && (rq->extts.flags & PTP_ENABLE_FEATURE) && @@ -304,7 +339,7 @@ static int mv88e6352_ptp_enable_extts(struct mv88e6xxx_chip *chip, schedule_delayed_work(&chip->tai_event_work, TAI_EVENT_WORK_INTERVAL); - err = mv88e6352_config_eventcap(chip, PTP_CLOCK_EXTTS, rising); + err = mv88e6352_config_eventcap(chip, rising); } else { func = MV88E6352_G2_SCRATCH_GPIO_PCTL_GPIO; @@ -360,37 +395,6 @@ const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = { (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), - .cc_shift = MV88E6XXX_CC_SHIFT, - .cc_mult = MV88E6XXX_CC_MULT, - .cc_mult_num = MV88E6XXX_CC_MULT_NUM, - .cc_mult_dem = MV88E6XXX_CC_MULT_DEM, -}; - -const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops = { - .clock_read = mv88e6352_ptp_clock_read, - .ptp_enable = mv88e6352_ptp_enable, - .ptp_verify = mv88e6352_ptp_verify, - .event_work = mv88e6352_tai_event_work, - .port_enable = mv88e6352_hwtstamp_port_enable, - .port_disable = mv88e6352_hwtstamp_port_disable, - .n_ext_ts = 1, - .arr0_sts_reg = MV88E6XXX_PORT_PTP_ARR0_STS, - .arr1_sts_reg = MV88E6XXX_PORT_PTP_ARR1_STS, - .dep_sts_reg = MV88E6XXX_PORT_PTP_DEP_STS, - .rx_filters = (1 << HWTSTAMP_FILTER_NONE) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), - .cc_shift = MV88E6250_CC_SHIFT, - .cc_mult = MV88E6250_CC_MULT, - .cc_mult_num = MV88E6250_CC_MULT_NUM, - .cc_mult_dem = MV88E6250_CC_MULT_DEM, }; const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = { @@ -414,10 +418,6 @@ const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = { (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), - .cc_shift = MV88E6XXX_CC_SHIFT, - .cc_mult = MV88E6XXX_CC_MULT, - .cc_mult_num = MV88E6XXX_CC_MULT_NUM, - .cc_mult_dem = MV88E6XXX_CC_MULT_DEM, }; const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops = { @@ -442,13 +442,9 @@ const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops = { (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), - .cc_shift = MV88E6XXX_CC_SHIFT, - .cc_mult = MV88E6XXX_CC_MULT, - .cc_mult_num = MV88E6XXX_CC_MULT_NUM, - .cc_mult_dem = MV88E6XXX_CC_MULT_DEM, }; -static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc) +static u64 mv88e6xxx_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); @@ -458,10 +454,10 @@ static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc) return 0; } -/* With a 125MHz input clock, the 32-bit timestamp counter overflows in ~34.3 +/* With a 250MHz input clock, the 32-bit timestamp counter overflows in ~17.2 * seconds; this task forces periodic reads so that we don't miss any. */ -#define MV88E6XXX_TAI_OVERFLOW_PERIOD (HZ * 16) +#define MV88E6XXX_TAI_OVERFLOW_PERIOD (HZ * 8) static void mv88e6xxx_ptp_overflow_check(struct work_struct *work) { struct delayed_work *dw = to_delayed_work(work); @@ -480,11 +476,15 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) int i; /* Set up the cycle counter */ + chip->cc_coeffs = mv88e6xxx_cc_coeff_get(chip); + if (IS_ERR(chip->cc_coeffs)) + return PTR_ERR(chip->cc_coeffs); + memset(&chip->tstamp_cc, 0, sizeof(chip->tstamp_cc)); chip->tstamp_cc.read = mv88e6xxx_ptp_clock_read; chip->tstamp_cc.mask = CYCLECOUNTER_MASK(32); - chip->tstamp_cc.mult = ptp_ops->cc_mult; - chip->tstamp_cc.shift = ptp_ops->cc_shift; + chip->tstamp_cc.mult = chip->cc_coeffs->cc_mult; + chip->tstamp_cc.shift = chip->cc_coeffs->cc_shift; timecounter_init(&chip->tstamp_tc, &chip->tstamp_cc, ktime_to_ns(ktime_get_real())); @@ -520,6 +520,10 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) chip->ptp_clock_info.verify = ptp_ops->ptp_verify; chip->ptp_clock_info.do_aux_work = mv88e6xxx_hwtstamp_work; + chip->ptp_clock_info.supported_extts_flags = PTP_RISING_EDGE | + PTP_FALLING_EDGE | + PTP_STRICT_FLAGS; + if (ptp_ops->set_ptp_cpu_port) { struct dsa_port *dp; int upstream = 0; @@ -547,6 +551,7 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) return 0; } +/* This must never be called holding the register lock */ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip) { if (chip->ptp_clock) { diff --git a/drivers/net/dsa/mv88e6xxx/ptp.h b/drivers/net/dsa/mv88e6xxx/ptp.h index 6c4d09adc93c..95bdddb0bf39 100644 --- a/drivers/net/dsa/mv88e6xxx/ptp.h +++ b/drivers/net/dsa/mv88e6xxx/ptp.h @@ -16,132 +16,56 @@ #include "chip.h" /* Offset 0x00: TAI Global Config */ -#define MV88E6XXX_TAI_CFG 0x00 -#define MV88E6XXX_TAI_CFG_CAP_OVERWRITE 0x8000 -#define MV88E6XXX_TAI_CFG_CAP_CTR_START 0x4000 -#define MV88E6XXX_TAI_CFG_EVREQ_FALLING 0x2000 -#define MV88E6XXX_TAI_CFG_TRIG_ACTIVE_LO 0x1000 -#define MV88E6XXX_TAI_CFG_IRL_ENABLE 0x0400 -#define MV88E6XXX_TAI_CFG_TRIG_IRQ_EN 0x0200 -#define MV88E6XXX_TAI_CFG_EVREQ_IRQ_EN 0x0100 -#define MV88E6XXX_TAI_CFG_TRIG_LOCK 0x0080 -#define MV88E6XXX_TAI_CFG_BLOCK_UPDATE 0x0008 -#define MV88E6XXX_TAI_CFG_MULTI_PTP 0x0004 -#define MV88E6XXX_TAI_CFG_TRIG_MODE_ONESHOT 0x0002 -#define MV88E6XXX_TAI_CFG_TRIG_ENABLE 0x0001 +#define MV88E6352_TAI_CFG 0x00 +#define MV88E6352_TAI_CFG_CAP_OVERWRITE 0x8000 +#define MV88E6352_TAI_CFG_CAP_CTR_START 0x4000 +#define MV88E6352_TAI_CFG_EVREQ_FALLING 0x2000 +#define MV88E6352_TAI_CFG_TRIG_ACTIVE_LO 0x1000 +#define MV88E6352_TAI_CFG_IRL_ENABLE 0x0400 +#define MV88E6352_TAI_CFG_TRIG_IRQ_EN 0x0200 +#define MV88E6352_TAI_CFG_EVREQ_IRQ_EN 0x0100 +#define MV88E6352_TAI_CFG_TRIG_LOCK 0x0080 +#define MV88E6352_TAI_CFG_BLOCK_UPDATE 0x0008 +#define MV88E6352_TAI_CFG_MULTI_PTP 0x0004 +#define MV88E6352_TAI_CFG_TRIG_MODE_ONESHOT 0x0002 +#define MV88E6352_TAI_CFG_TRIG_ENABLE 0x0001 /* Offset 0x01: Timestamp Clock Period (ps) */ #define MV88E6XXX_TAI_CLOCK_PERIOD 0x01 -/* Offset 0x02/0x03: Trigger Generation Amount */ -#define MV88E6XXX_TAI_TRIG_GEN_AMOUNT_LO 0x02 -#define MV88E6XXX_TAI_TRIG_GEN_AMOUNT_HI 0x03 - -/* Offset 0x04: Clock Compensation */ -#define MV88E6XXX_TAI_TRIG_CLOCK_COMP 0x04 - -/* Offset 0x05: Trigger Configuration */ -#define MV88E6XXX_TAI_TRIG_CFG 0x05 - -/* Offset 0x06: Ingress Rate Limiter Clock Generation Amount */ -#define MV88E6XXX_TAI_IRL_AMOUNT 0x06 - -/* Offset 0x07: Ingress Rate Limiter Compensation */ -#define MV88E6XXX_TAI_IRL_COMP 0x07 - -/* Offset 0x08: Ingress Rate Limiter Compensation */ -#define MV88E6XXX_TAI_IRL_COMP_PS 0x08 - /* Offset 0x09: Event Status */ -#define MV88E6XXX_TAI_EVENT_STATUS 0x09 -#define MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG 0x4000 -#define MV88E6XXX_TAI_EVENT_STATUS_ERROR 0x0200 -#define MV88E6XXX_TAI_EVENT_STATUS_VALID 0x0100 -#define MV88E6XXX_TAI_EVENT_STATUS_CTR_MASK 0x00ff - -/* Offset 0x0A/0x0B: Event Time */ -#define MV88E6XXX_TAI_EVENT_TIME_LO 0x0a -#define MV88E6XXX_TAI_EVENT_TYPE_HI 0x0b +#define MV88E6352_TAI_EVENT_STATUS 0x09 +#define MV88E6352_TAI_EVENT_STATUS_ERROR 0x0200 +#define MV88E6352_TAI_EVENT_STATUS_VALID 0x0100 +#define MV88E6352_TAI_EVENT_STATUS_CTR_MASK 0x00ff +/* Offset 0x0A/0x0B: Event Time Lo/Hi. Always read with Event Status. */ /* Offset 0x0E/0x0F: PTP Global Time */ -#define MV88E6XXX_TAI_TIME_LO 0x0e -#define MV88E6XXX_TAI_TIME_HI 0x0f - -/* Offset 0x10/0x11: Trig Generation Time */ -#define MV88E6XXX_TAI_TRIG_TIME_LO 0x10 -#define MV88E6XXX_TAI_TRIG_TIME_HI 0x11 - -/* Offset 0x12: Lock Status */ -#define MV88E6XXX_TAI_LOCK_STATUS 0x12 - -/* Offset 0x00: Ether Type */ -#define MV88E6XXX_PTP_GC_ETYPE 0x00 +#define MV88E6352_TAI_TIME_LO 0x0e +#define MV88E6352_TAI_TIME_HI 0x0f /* 6165 Global Control Registers */ -/* Offset 0x00: Ether Type */ -#define MV88E6XXX_PTP_GC_ETYPE 0x00 - -/* Offset 0x01: Message ID */ -#define MV88E6XXX_PTP_GC_MESSAGE_ID 0x01 - -/* Offset 0x02: Time Stamp Arrive Time */ -#define MV88E6XXX_PTP_GC_TS_ARR_PTR 0x02 - -/* Offset 0x03: Port Arrival Interrupt Enable */ -#define MV88E6XXX_PTP_GC_PORT_ARR_INT_EN 0x03 - -/* Offset 0x04: Port Departure Interrupt Enable */ -#define MV88E6XXX_PTP_GC_PORT_DEP_INT_EN 0x04 - -/* Offset 0x05: Configuration */ -#define MV88E6XXX_PTP_GC_CONFIG 0x05 -#define MV88E6XXX_PTP_GC_CONFIG_DIS_OVERWRITE BIT(1) -#define MV88E6XXX_PTP_GC_CONFIG_DIS_TS BIT(0) - -/* Offset 0x8: Interrupt Status */ -#define MV88E6XXX_PTP_GC_INT_STATUS 0x08 - /* Offset 0x9/0xa: Global Time */ -#define MV88E6XXX_PTP_GC_TIME_LO 0x09 -#define MV88E6XXX_PTP_GC_TIME_HI 0x0A +#define MV88E6165_PTP_GC_TIME_LO 0x09 +#define MV88E6165_PTP_GC_TIME_HI 0x0A -/* 6165 Per Port Registers */ +/* 6165 Per Port Registers. The arrival and departure registers are a + * common block consisting of status, two time registers and the sequence ID + */ /* Offset 0: Arrival Time 0 Status */ #define MV88E6165_PORT_PTP_ARR0_STS 0x00 -/* Offset 0x01/0x02: PTP Arrival 0 Time */ -#define MV88E6165_PORT_PTP_ARR0_TIME_LO 0x01 -#define MV88E6165_PORT_PTP_ARR0_TIME_HI 0x02 - -/* Offset 0x03: PTP Arrival 0 Sequence ID */ -#define MV88E6165_PORT_PTP_ARR0_SEQID 0x03 - /* Offset 0x04: PTP Arrival 1 Status */ #define MV88E6165_PORT_PTP_ARR1_STS 0x04 -/* Offset 0x05/0x6E: PTP Arrival 1 Time */ -#define MV88E6165_PORT_PTP_ARR1_TIME_LO 0x05 -#define MV88E6165_PORT_PTP_ARR1_TIME_HI 0x06 - -/* Offset 0x07: PTP Arrival 1 Sequence ID */ -#define MV88E6165_PORT_PTP_ARR1_SEQID 0x07 - /* Offset 0x08: PTP Departure Status */ #define MV88E6165_PORT_PTP_DEP_STS 0x08 -/* Offset 0x09/0x0a: PTP Deperture Time */ -#define MV88E6165_PORT_PTP_DEP_TIME_LO 0x09 -#define MV88E6165_PORT_PTP_DEP_TIME_HI 0x0a - -/* Offset 0x0b: PTP Departure Sequence ID */ -#define MV88E6165_PORT_PTP_DEP_SEQID 0x0b - /* Offset 0x0d: Port Status */ #define MV88E6164_PORT_STATUS 0x0d #ifdef CONFIG_NET_DSA_MV88E6XXX_PTP -long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp); int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip); void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip); @@ -149,17 +73,11 @@ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip); ptp_clock_info) extern const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops; -extern const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops; extern const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops; extern const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops; #else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */ -static inline long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp) -{ - return -1; -} - static inline int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) { return 0; @@ -170,7 +88,6 @@ static inline void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip) } static const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = {}; -static const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops = {}; static const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = {}; static const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops = {}; diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c index 3b4b42651fa3..b3330211edbc 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.c +++ b/drivers/net/dsa/mv88e6xxx/serdes.c @@ -132,8 +132,8 @@ int mv88e6352_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port) return ARRAY_SIZE(mv88e6352_serdes_hw_stats); } -int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip, - int port, uint8_t *data) +int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip, int port, + uint8_t **data) { struct mv88e6352_serdes_hw_stat *stat; int err, i; @@ -144,8 +144,7 @@ int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip, for (i = 0; i < ARRAY_SIZE(mv88e6352_serdes_hw_stats); i++) { stat = &mv88e6352_serdes_hw_stats[i]; - memcpy(data + i * ETH_GSTRING_LEN, stat->string, - ETH_GSTRING_LEN); + ethtool_puts(data, stat->string); } return ARRAY_SIZE(mv88e6352_serdes_hw_stats); } @@ -177,8 +176,8 @@ static uint64_t mv88e6352_serdes_get_stat(struct mv88e6xxx_chip *chip, return val; } -int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +size_t mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, + uint64_t *data) { struct mv88e6xxx_port *mv88e6xxx_port = &chip->ports[port]; struct mv88e6352_serdes_hw_stat *stat; @@ -187,7 +186,7 @@ int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, err = mv88e6352_g2_scratch_port_has_serdes(chip, port); if (err <= 0) - return err; + return 0; BUILD_BUG_ON(ARRAY_SIZE(mv88e6352_serdes_hw_stats) > ARRAY_SIZE(mv88e6xxx_port->serdes_stats)); @@ -394,8 +393,8 @@ int mv88e6390_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port) return ARRAY_SIZE(mv88e6390_serdes_hw_stats); } -int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, - int port, uint8_t *data) +int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, int port, + uint8_t **data) { struct mv88e6390_serdes_hw_stat *stat; int i; @@ -405,8 +404,7 @@ int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, for (i = 0; i < ARRAY_SIZE(mv88e6390_serdes_hw_stats); i++) { stat = &mv88e6390_serdes_hw_stats[i]; - memcpy(data + i * ETH_GSTRING_LEN, stat->string, - ETH_GSTRING_LEN); + ethtool_puts(data, stat->string); } return ARRAY_SIZE(mv88e6390_serdes_hw_stats); } @@ -429,8 +427,8 @@ static uint64_t mv88e6390_serdes_get_stat(struct mv88e6xxx_chip *chip, int lane, return reg[0] | ((u64)reg[1] << 16) | ((u64)reg[2] << 32); } -int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data) +size_t mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, + uint64_t *data) { struct mv88e6390_serdes_hw_stat *stat; int lane; diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h index aac95cab46e3..ad887d8601bc 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.h +++ b/drivers/net/dsa/mv88e6xxx/serdes.h @@ -125,15 +125,15 @@ unsigned int mv88e6352_serdes_irq_mapping(struct mv88e6xxx_chip *chip, unsigned int mv88e6390_serdes_irq_mapping(struct mv88e6xxx_chip *chip, int port); int mv88e6352_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port); -int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip, - int port, uint8_t *data); -int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data); +int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip, int port, + uint8_t **data); +size_t mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, + uint64_t *data); int mv88e6390_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port); -int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, - int port, uint8_t *data); -int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, - uint64_t *data); +int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip, int port, + uint8_t **data); +size_t mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port, + uint64_t *data); int mv88e6352_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port); void mv88e6352_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p); diff --git a/drivers/net/dsa/mv88e6xxx/trace.h b/drivers/net/dsa/mv88e6xxx/trace.h index f59ca04768e7..5bd015b2b97a 100644 --- a/drivers/net/dsa/mv88e6xxx/trace.h +++ b/drivers/net/dsa/mv88e6xxx/trace.h @@ -28,7 +28,7 @@ DECLARE_EVENT_CLASS(mv88e6xxx_atu_violation, ), TP_fast_assign( - __assign_str(name, dev_name(dev)); + __assign_str(name); __entry->spid = spid; __entry->portvec = portvec; memcpy(__entry->addr, addr, ETH_ALEN); @@ -68,7 +68,7 @@ DECLARE_EVENT_CLASS(mv88e6xxx_vtu_violation, ), TP_fast_assign( - __assign_str(name, dev_name(dev)); + __assign_str(name); __entry->spid = spid; __entry->vid = vid; ), diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 9a3e5ec16972..9e5ede932b42 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -42,30 +42,65 @@ static struct net_device *felix_classify_db(struct dsa_db db) } } -static int felix_cpu_port_for_master(struct dsa_switch *ds, - struct net_device *master) +static int felix_cpu_port_for_conduit(struct dsa_switch *ds, + struct net_device *conduit) { struct ocelot *ocelot = ds->priv; struct dsa_port *cpu_dp; int lag; - if (netif_is_lag_master(master)) { + if (netif_is_lag_master(conduit)) { mutex_lock(&ocelot->fwd_domain_lock); - lag = ocelot_bond_get_id(ocelot, master); + lag = ocelot_bond_get_id(ocelot, conduit); mutex_unlock(&ocelot->fwd_domain_lock); return lag; } - cpu_dp = master->dsa_ptr; + cpu_dp = conduit->dsa_ptr; return cpu_dp->index; } +/** + * felix_update_tag_8021q_rx_rule - Update VCAP ES0 tag_8021q rule after + * vlan_filtering change + * @outer_tagging_rule: Pointer to VCAP filter on which the update is performed + * @vlan_filtering: Current bridge VLAN filtering setting + * + * Source port identification for tag_8021q is done using VCAP ES0 rules on the + * CPU port(s). The ES0 tag B (inner tag from the packet) can be configured as + * either: + * - push_inner_tag=0: the inner tag is never pushed into the frame + * (and we lose info about the classified VLAN). This is + * good when the classified VLAN is a discardable quantity + * for the software RX path: it is either set to + * OCELOT_STANDALONE_PVID, or to + * ocelot_vlan_unaware_pvid(bridge). + * - push_inner_tag=1: the inner tag is always pushed. This is good when the + * classified VLAN is not a discardable quantity (the port + * is under a VLAN-aware bridge, and software needs to + * continue processing the packet in the same VLAN as the + * hardware). + * The point is that what is good for a VLAN-unaware port is not good for a + * VLAN-aware port, and vice versa. Thus, the RX tagging rules must be kept in + * sync with the VLAN filtering state of the port. + */ +static void +felix_update_tag_8021q_rx_rule(struct ocelot_vcap_filter *outer_tagging_rule, + bool vlan_filtering) +{ + if (vlan_filtering) + outer_tagging_rule->action.push_inner_tag = OCELOT_ES0_TAG; + else + outer_tagging_rule->action.push_inner_tag = OCELOT_NO_ES0_TAG; +} + /* Set up VCAP ES0 rules for pushing a tag_8021q VLAN towards the CPU such that * the tagger can perform RX source port identification. */ static int felix_tag_8021q_vlan_add_rx(struct dsa_switch *ds, int port, - int upstream, u16 vid) + int upstream, u16 vid, + bool vlan_filtering) { struct ocelot_vcap_filter *outer_tagging_rule; struct ocelot *ocelot = ds->priv; @@ -96,6 +131,14 @@ static int felix_tag_8021q_vlan_add_rx(struct dsa_switch *ds, int port, outer_tagging_rule->action.tag_a_tpid_sel = OCELOT_TAG_TPID_SEL_8021AD; outer_tagging_rule->action.tag_a_vid_sel = 1; outer_tagging_rule->action.vid_a_val = vid; + felix_update_tag_8021q_rx_rule(outer_tagging_rule, vlan_filtering); + outer_tagging_rule->action.tag_b_tpid_sel = OCELOT_TAG_TPID_SEL_8021Q; + /* Leave TAG_B_VID_SEL at 0 (Classified VID + VID_B_VAL). Since we also + * leave VID_B_VAL at 0, this makes ES0 tag B (the inner tag) equal to + * the classified VID, which we need to see in the DSA tagger's receive + * path. Note: the inner tag is only visible in the packet when pushed + * (push_inner_tag == OCELOT_ES0_TAG). + */ err = ocelot_vcap_filter_add(ocelot, outer_tagging_rule, NULL); if (err) @@ -227,6 +270,7 @@ static int felix_tag_8021q_vlan_del_tx(struct dsa_switch *ds, int port, u16 vid) static int felix_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid, u16 flags) { + struct dsa_port *dp = dsa_to_port(ds, port); struct dsa_port *cpu_dp; int err; @@ -234,11 +278,12 @@ static int felix_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid, * membership, which we aren't. So we don't need to add any VCAP filter * for the CPU port. */ - if (!dsa_is_user_port(ds, port)) + if (!dsa_port_is_user(dp)) return 0; dsa_switch_for_each_cpu_port(cpu_dp, ds) { - err = felix_tag_8021q_vlan_add_rx(ds, port, cpu_dp->index, vid); + err = felix_tag_8021q_vlan_add_rx(ds, port, cpu_dp->index, vid, + dsa_port_is_vlan_filtering(dp)); if (err) return err; } @@ -258,10 +303,11 @@ add_tx_failed: static int felix_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid) { + struct dsa_port *dp = dsa_to_port(ds, port); struct dsa_port *cpu_dp; int err; - if (!dsa_is_user_port(ds, port)) + if (!dsa_port_is_user(dp)) return 0; dsa_switch_for_each_cpu_port(cpu_dp, ds) { @@ -278,11 +324,41 @@ static int felix_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid) del_tx_failed: dsa_switch_for_each_cpu_port(cpu_dp, ds) - felix_tag_8021q_vlan_add_rx(ds, port, cpu_dp->index, vid); + felix_tag_8021q_vlan_add_rx(ds, port, cpu_dp->index, vid, + dsa_port_is_vlan_filtering(dp)); return err; } +static int felix_update_tag_8021q_rx_rules(struct dsa_switch *ds, int port, + bool vlan_filtering) +{ + struct ocelot_vcap_filter *outer_tagging_rule; + struct ocelot_vcap_block *block_vcap_es0; + struct ocelot *ocelot = ds->priv; + struct dsa_port *cpu_dp; + unsigned long cookie; + int err; + + block_vcap_es0 = &ocelot->block[VCAP_ES0]; + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + cookie = OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN(ocelot, port, + cpu_dp->index); + + outer_tagging_rule = ocelot_vcap_block_find_filter_by_id(block_vcap_es0, + cookie, false); + + felix_update_tag_8021q_rx_rule(outer_tagging_rule, vlan_filtering); + + err = ocelot_vcap_filter_replace(ocelot, outer_tagging_rule); + if (err) + return err; + } + + return 0; +} + static int felix_trap_get_cpu_port(struct dsa_switch *ds, const struct ocelot_vcap_filter *trap) { @@ -366,7 +442,7 @@ static int felix_update_trapping_destinations(struct dsa_switch *ds, * is the mode through which frames can be injected from and extracted to an * external CPU, over Ethernet. In NXP SoCs, the "external CPU" is the ARM CPU * running Linux, and this forms a DSA setup together with the enetc or fman - * DSA master. + * DSA conduit. */ static void felix_npi_port_init(struct ocelot *ocelot, int port) { @@ -441,16 +517,16 @@ static unsigned long felix_tag_npi_get_host_fwd_mask(struct dsa_switch *ds) return BIT(ocelot->num_phys_ports); } -static int felix_tag_npi_change_master(struct dsa_switch *ds, int port, - struct net_device *master, - struct netlink_ext_ack *extack) +static int felix_tag_npi_change_conduit(struct dsa_switch *ds, int port, + struct net_device *conduit, + struct netlink_ext_ack *extack) { struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; struct ocelot *ocelot = ds->priv; - if (netif_is_lag_master(master)) { + if (netif_is_lag_master(conduit)) { NL_SET_ERR_MSG_MOD(extack, - "LAG DSA master only supported using ocelot-8021q"); + "LAG DSA conduit only supported using ocelot-8021q"); return -EOPNOTSUPP; } @@ -459,24 +535,24 @@ static int felix_tag_npi_change_master(struct dsa_switch *ds, int port, * come back up until they're all changed to the new one. */ dsa_switch_for_each_user_port(other_dp, ds) { - struct net_device *slave = other_dp->slave; + struct net_device *user = other_dp->user; - if (other_dp != dp && (slave->flags & IFF_UP) && - dsa_port_to_master(other_dp) != master) { + if (other_dp != dp && (user->flags & IFF_UP) && + dsa_port_to_conduit(other_dp) != conduit) { NL_SET_ERR_MSG_MOD(extack, - "Cannot change while old master still has users"); + "Cannot change while old conduit still has users"); return -EOPNOTSUPP; } } felix_npi_port_deinit(ocelot, ocelot->npi); - felix_npi_port_init(ocelot, felix_cpu_port_for_master(ds, master)); + felix_npi_port_init(ocelot, felix_cpu_port_for_conduit(ds, conduit)); return 0; } /* Alternatively to using the NPI functionality, that same hardware MAC - * connected internally to the enetc or fman DSA master can be configured to + * connected internally to the enetc or fman DSA conduit can be configured to * use the software-defined tag_8021q frame format. As far as the hardware is * concerned, it thinks it is a "dumb switch" - the queues of the CPU port * module are now disconnected from it, but can still be accessed through @@ -486,7 +562,7 @@ static const struct felix_tag_proto_ops felix_tag_npi_proto_ops = { .setup = felix_tag_npi_setup, .teardown = felix_tag_npi_teardown, .get_host_fwd_mask = felix_tag_npi_get_host_fwd_mask, - .change_master = felix_tag_npi_change_master, + .change_conduit = felix_tag_npi_change_conduit, }; static int felix_tag_8021q_setup(struct dsa_switch *ds) @@ -528,7 +604,19 @@ static int felix_tag_8021q_setup(struct dsa_switch *ds) * so we need to be careful that there are no extra frames to be * dequeued over MMIO, since we would never know to discard them. */ + ocelot_lock_xtr_grp_bh(ocelot, 0); ocelot_drain_cpu_queue(ocelot, 0); + ocelot_unlock_xtr_grp_bh(ocelot, 0); + + /* Problem: when using push_inner_tag=1 for ES0 tag B, we lose info + * about whether the received packets were VLAN-tagged on the wire, + * since they are always tagged on egress towards the CPU port. + * + * Since using push_inner_tag=1 is unavoidable for VLAN-aware bridges, + * we must work around the fallout by untagging in software to make + * untagged reception work more or less as expected. + */ + ds->untag_vlan_aware_bridge_pvid = true; return 0; } @@ -554,6 +642,8 @@ static void felix_tag_8021q_teardown(struct dsa_switch *ds) ocelot_port_teardown_dsa_8021q_cpu(ocelot, dp->index); dsa_tag_8021q_unregister(ds); + + ds->untag_vlan_aware_bridge_pvid = false; } static unsigned long felix_tag_8021q_get_host_fwd_mask(struct dsa_switch *ds) @@ -561,11 +651,11 @@ static unsigned long felix_tag_8021q_get_host_fwd_mask(struct dsa_switch *ds) return dsa_cpu_ports(ds); } -static int felix_tag_8021q_change_master(struct dsa_switch *ds, int port, - struct net_device *master, - struct netlink_ext_ack *extack) +static int felix_tag_8021q_change_conduit(struct dsa_switch *ds, int port, + struct net_device *conduit, + struct netlink_ext_ack *extack) { - int cpu = felix_cpu_port_for_master(ds, master); + int cpu = felix_cpu_port_for_conduit(ds, conduit); struct ocelot *ocelot = ds->priv; ocelot_port_unassign_dsa_8021q_cpu(ocelot, port); @@ -578,7 +668,7 @@ static const struct felix_tag_proto_ops felix_tag_8021q_proto_ops = { .setup = felix_tag_8021q_setup, .teardown = felix_tag_8021q_teardown, .get_host_fwd_mask = felix_tag_8021q_get_host_fwd_mask, - .change_master = felix_tag_8021q_change_master, + .change_conduit = felix_tag_8021q_change_conduit, }; static void felix_set_host_flood(struct dsa_switch *ds, unsigned long mask, @@ -741,14 +831,14 @@ static void felix_port_set_host_flood(struct dsa_switch *ds, int port, !!felix->host_flood_mc_mask, true); } -static int felix_port_change_master(struct dsa_switch *ds, int port, - struct net_device *master, - struct netlink_ext_ack *extack) +static int felix_port_change_conduit(struct dsa_switch *ds, int port, + struct net_device *conduit, + struct netlink_ext_ack *extack) { struct ocelot *ocelot = ds->priv; struct felix *felix = ocelot_to_felix(ocelot); - return felix->tag_proto_ops->change_master(ds, port, master, extack); + return felix->tag_proto_ops->change_conduit(ds, port, conduit, extack); } static int felix_set_ageing_time(struct dsa_switch *ds, @@ -953,7 +1043,7 @@ static int felix_lag_join(struct dsa_switch *ds, int port, if (!dsa_is_cpu_port(ds, port)) return 0; - return felix_port_change_master(ds, port, lag.dev, extack); + return felix_port_change_conduit(ds, port, lag.dev, extack); } static int felix_lag_leave(struct dsa_switch *ds, int port, @@ -967,7 +1057,7 @@ static int felix_lag_leave(struct dsa_switch *ds, int port, if (!dsa_is_cpu_port(ds, port)) return 0; - return felix_port_change_master(ds, port, lag.dev, NULL); + return felix_port_change_conduit(ds, port, lag.dev, NULL); } static int felix_lag_change(struct dsa_switch *ds, int port) @@ -1008,8 +1098,23 @@ static int felix_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, struct netlink_ext_ack *extack) { struct ocelot *ocelot = ds->priv; + bool using_tag_8021q; + struct felix *felix; + int err; + + err = ocelot_port_vlan_filtering(ocelot, port, enabled, extack); + if (err) + return err; - return ocelot_port_vlan_filtering(ocelot, port, enabled, extack); + felix = ocelot_to_felix(ocelot); + using_tag_8021q = felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q; + if (using_tag_8021q) { + err = felix_update_tag_8021q_rx_rules(ds, port, enabled); + if (err) + return err; + } + + return 0; } static int felix_vlan_add(struct dsa_switch *ds, int port, @@ -1048,26 +1153,37 @@ static void felix_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(ocelot->ports[port]->phy_mode, config->supported_interfaces); + if (ocelot->ports[port]->phy_mode == PHY_INTERFACE_MODE_USXGMII) + __set_bit(PHY_INTERFACE_MODE_10G_QXGMII, + config->supported_interfaces); } -static void felix_phylink_mac_config(struct dsa_switch *ds, int port, +static void felix_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct ocelot *ocelot = ds->priv; - struct felix *felix = ocelot_to_felix(ocelot); + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ocelot *ocelot = dp->ds->priv; + int port = dp->index; + struct felix *felix; + + felix = ocelot_to_felix(ocelot); if (felix->info->phylink_mac_config) felix->info->phylink_mac_config(ocelot, port, mode, state); } -static struct phylink_pcs *felix_phylink_mac_select_pcs(struct dsa_switch *ds, - int port, - phy_interface_t iface) +static struct phylink_pcs * +felix_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t iface) { - struct ocelot *ocelot = ds->priv; - struct felix *felix = ocelot_to_felix(ocelot); + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ocelot *ocelot = dp->ds->priv; struct phylink_pcs *pcs = NULL; + int port = dp->index; + struct felix *felix; + + felix = ocelot_to_felix(ocelot); if (felix->pcs && felix->pcs[port]) pcs = felix->pcs[port]; @@ -1075,11 +1191,13 @@ static struct phylink_pcs *felix_phylink_mac_select_pcs(struct dsa_switch *ds, return pcs; } -static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void felix_phylink_mac_link_down(struct phylink_config *config, unsigned int link_an_mode, phy_interface_t interface) { - struct ocelot *ocelot = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ocelot *ocelot = dp->ds->priv; + int port = dp->index; struct felix *felix; felix = ocelot_to_felix(ocelot); @@ -1088,15 +1206,19 @@ static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port, felix->info->quirks); } -static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void felix_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int link_an_mode, phy_interface_t interface, - struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct ocelot *ocelot = ds->priv; - struct felix *felix = ocelot_to_felix(ocelot); + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ocelot *ocelot = dp->ds->priv; + int port = dp->index; + struct felix *felix; + + felix = ocelot_to_felix(ocelot); ocelot_phylink_mac_link_up(ocelot, port, phydev, link_an_mode, interface, speed, duplex, tx_pause, rx_pause, @@ -1111,20 +1233,39 @@ static int felix_port_enable(struct dsa_switch *ds, int port, { struct dsa_port *dp = dsa_to_port(ds, port); struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); if (!dsa_port_is_user(dp)) return 0; if (ocelot->npi >= 0) { - struct net_device *master = dsa_port_to_master(dp); + struct net_device *conduit = dsa_port_to_conduit(dp); - if (felix_cpu_port_for_master(ds, master) != ocelot->npi) { - dev_err(ds->dev, "Multiple masters are not allowed\n"); + if (felix_cpu_port_for_conduit(ds, conduit) != ocelot->npi) { + dev_err(ds->dev, "Multiple conduits are not allowed\n"); return -EINVAL; } } - return 0; + if (!dp->hsr_dev || felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return 0; + + return dsa_port_simple_hsr_join(ds, port, dp->hsr_dev, NULL); +} + +static void felix_port_disable(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (!dsa_port_is_user(dp)) + return; + + if (!dp->hsr_dev || felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return; + + dsa_port_simple_hsr_leave(ds, port, dp->hsr_dev); } static void felix_port_qos_map_init(struct ocelot *ocelot, int port) @@ -1197,6 +1338,14 @@ static void felix_get_eth_phy_stats(struct dsa_switch *ds, int port, ocelot_port_get_eth_phy_stats(ocelot, port, phy_stats); } +static void felix_get_ts_stats(struct dsa_switch *ds, int port, + struct ethtool_ts_stats *ts_stats) +{ + struct ocelot *ocelot = ds->priv; + + ocelot_port_get_ts_stats(ocelot, port, ts_stats); +} + static void felix_get_strings(struct dsa_switch *ds, int port, u32 stringset, u8 *data) { @@ -1220,7 +1369,7 @@ static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset) } static int felix_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { struct ocelot *ocelot = ds->priv; @@ -1232,6 +1381,7 @@ static const u32 felix_phy_match_table[PHY_INTERFACE_MODE_MAX] = { [PHY_INTERFACE_MODE_SGMII] = OCELOT_PORT_MODE_SGMII, [PHY_INTERFACE_MODE_QSGMII] = OCELOT_PORT_MODE_QSGMII, [PHY_INTERFACE_MODE_USXGMII] = OCELOT_PORT_MODE_USXGMII, + [PHY_INTERFACE_MODE_10G_QXGMII] = OCELOT_PORT_MODE_10G_QXGMII, [PHY_INTERFACE_MODE_1000BASEX] = OCELOT_PORT_MODE_1000BASEX, [PHY_INTERFACE_MODE_2500BASEX] = OCELOT_PORT_MODE_2500BASEX, }; @@ -1251,9 +1401,8 @@ static int felix_parse_ports_node(struct felix *felix, phy_interface_t *port_phy_modes) { struct device *dev = felix->ocelot.dev; - struct device_node *child; - for_each_available_child_of_node(ports_node, child) { + for_each_available_child_of_node_scoped(ports_node, child) { phy_interface_t phy_mode; u32 port; int err; @@ -1262,7 +1411,6 @@ static int felix_parse_ports_node(struct felix *felix, if (of_property_read_u32(child, "reg", &port) < 0) { dev_err(dev, "Port number not defined in device tree " "(property \"reg\")\n"); - of_node_put(child); return -ENODEV; } @@ -1272,7 +1420,6 @@ static int felix_parse_ports_node(struct felix *felix, dev_err(dev, "Failed to read phy-mode or " "phy-interface-type property for port %d\n", port); - of_node_put(child); return -ENODEV; } @@ -1504,6 +1651,8 @@ static void felix_port_deferred_xmit(struct kthread_work *work) int port = xmit_work->dp->index; int retries = 10; + ocelot_lock_inj_grp(ocelot, 0); + do { if (ocelot_can_inject(ocelot, 0)) break; @@ -1512,6 +1661,7 @@ static void felix_port_deferred_xmit(struct kthread_work *work) } while (--retries); if (!retries) { + ocelot_unlock_inj_grp(ocelot, 0); dev_err(ocelot->dev, "port %d failed to inject skb\n", port); ocelot_port_purge_txtstamp_skb(ocelot, port, skb); @@ -1521,6 +1671,8 @@ static void felix_port_deferred_xmit(struct kthread_work *work) ocelot_port_inject_frame(ocelot, port, 0, rew_op, skb); + ocelot_unlock_inj_grp(ocelot, 0); + consume_skb(skb); kfree(xmit_work); } @@ -1583,6 +1735,15 @@ static int felix_setup(struct dsa_switch *ds) felix_port_qos_map_init(ocelot, dp->index); } + if (felix->info->request_irq) { + err = felix->info->request_irq(ocelot); + if (err) { + dev_err(ocelot->dev, "Failed to request IRQ: %pe\n", + ERR_PTR(err)); + goto out_deinit_ports; + } + } + err = ocelot_devlink_sb_register(ocelot); if (err) goto out_deinit_ports; @@ -1636,22 +1797,25 @@ static void felix_teardown(struct dsa_switch *ds) } static int felix_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct ocelot *ocelot = ds->priv; - return ocelot_hwstamp_get(ocelot, port, ifr); + ocelot_hwstamp_get(ocelot, port, config); + + return 0; } static int felix_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ocelot *ocelot = ds->priv; struct felix *felix = ocelot_to_felix(ocelot); bool using_tag_8021q; int err; - err = ocelot_hwstamp_set(ocelot, port, ifr); + err = ocelot_hwstamp_set(ocelot, port, config, extack); if (err) return err; @@ -1671,6 +1835,8 @@ static bool felix_check_xtr_pkt(struct ocelot *ocelot) if (!felix->info->quirk_no_xtr_irq) return false; + ocelot_lock_xtr_grp(ocelot, grp); + while (ocelot_read(ocelot, QS_XTR_DATA_PRESENT) & BIT(grp)) { struct sk_buff *skb; unsigned int type; @@ -1707,6 +1873,8 @@ out: ocelot_drain_cpu_queue(ocelot, 0); } + ocelot_unlock_xtr_grp(ocelot, grp); + return true; } @@ -2083,7 +2251,60 @@ static void felix_get_mm_stats(struct dsa_switch *ds, int port, ocelot_port_get_mm_stats(ocelot, port, stats); } -const struct dsa_switch_ops felix_switch_ops = { +/* Depending on port type, we may be able to support the offload later (with + * the "ocelot"/"seville" tagging protocols), or never. + * If we return 0, the dp->hsr_dev reference is kept for later; if we return + * -EOPNOTSUPP, it is cleared (which helps to not bother + * dsa_port_simple_hsr_leave() with an offload that didn't pass validation). + */ +static int felix_port_hsr_join(struct dsa_switch *ds, int port, + struct net_device *hsr, + struct netlink_ext_ack *extack) +{ + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) { + int err; + + err = dsa_port_simple_hsr_validate(ds, port, hsr, extack); + if (err) + return err; + + NL_SET_ERR_MSG_MOD(extack, + "Offloading not supported with \"ocelot-8021q\""); + return 0; + } + + if (!(dsa_to_port(ds, port)->user->flags & IFF_UP)) + return 0; + + return dsa_port_simple_hsr_join(ds, port, hsr, extack); +} + +static int felix_port_hsr_leave(struct dsa_switch *ds, int port, + struct net_device *hsr) +{ + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return 0; + + if (!(dsa_to_port(ds, port)->user->flags & IFF_UP)) + return 0; + + return dsa_port_simple_hsr_leave(ds, port, hsr); +} + +static const struct phylink_mac_ops felix_phylink_mac_ops = { + .mac_select_pcs = felix_phylink_mac_select_pcs, + .mac_config = felix_phylink_mac_config, + .mac_link_down = felix_phylink_mac_link_down, + .mac_link_up = felix_phylink_mac_link_up, +}; + +static const struct dsa_switch_ops felix_switch_ops = { .get_tag_protocol = felix_get_tag_protocol, .change_tag_protocol = felix_change_tag_protocol, .connect_tag_protocol = felix_connect_tag_protocol, @@ -2096,6 +2317,7 @@ const struct dsa_switch_ops felix_switch_ops = { .get_stats64 = felix_get_stats64, .get_pause_stats = felix_get_pause_stats, .get_rmon_stats = felix_get_rmon_stats, + .get_ts_stats = felix_get_ts_stats, .get_eth_ctrl_stats = felix_get_eth_ctrl_stats, .get_eth_mac_stats = felix_get_eth_mac_stats, .get_eth_phy_stats = felix_get_eth_phy_stats, @@ -2104,11 +2326,8 @@ const struct dsa_switch_ops felix_switch_ops = { .get_sset_count = felix_get_sset_count, .get_ts_info = felix_get_ts_info, .phylink_get_caps = felix_phylink_get_caps, - .phylink_mac_config = felix_phylink_mac_config, - .phylink_mac_select_pcs = felix_phylink_mac_select_pcs, - .phylink_mac_link_down = felix_phylink_mac_link_down, - .phylink_mac_link_up = felix_phylink_mac_link_up, .port_enable = felix_port_enable, + .port_disable = felix_port_disable, .port_fast_age = felix_port_fast_age, .port_fdb_dump = felix_fdb_dump, .port_fdb_add = felix_fdb_add, @@ -2164,9 +2383,57 @@ const struct dsa_switch_ops felix_switch_ops = { .port_add_dscp_prio = felix_port_add_dscp_prio, .port_del_dscp_prio = felix_port_del_dscp_prio, .port_set_host_flood = felix_port_set_host_flood, - .port_change_master = felix_port_change_master, + .port_change_conduit = felix_port_change_conduit, + .port_hsr_join = felix_port_hsr_join, + .port_hsr_leave = felix_port_hsr_leave, }; -EXPORT_SYMBOL_GPL(felix_switch_ops); + +int felix_register_switch(struct device *dev, resource_size_t switch_base, + int num_flooding_pgids, bool ptp, + bool mm_supported, + enum dsa_tag_protocol init_tag_proto, + const struct felix_info *info) +{ + struct dsa_switch *ds; + struct ocelot *ocelot; + struct felix *felix; + int err; + + felix = devm_kzalloc(dev, sizeof(*felix), GFP_KERNEL); + if (!felix) + return -ENOMEM; + + ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL); + if (!ds) + return -ENOMEM; + + dev_set_drvdata(dev, felix); + + ocelot = &felix->ocelot; + ocelot->dev = dev; + ocelot->num_flooding_pgids = num_flooding_pgids; + ocelot->ptp = ptp; + ocelot->mm_supported = mm_supported; + + felix->info = info; + felix->switch_base = switch_base; + felix->ds = ds; + felix->tag_proto = init_tag_proto; + + ds->dev = dev; + ds->num_ports = info->num_ports; + ds->num_tx_queues = OCELOT_NUM_TC; + ds->ops = &felix_switch_ops; + ds->phylink_mac_ops = &felix_phylink_mac_ops; + ds->priv = ocelot; + + err = dsa_register_switch(ds); + if (err) + dev_err_probe(dev, err, "Failed to register DSA switch\n"); + + return err; +} +EXPORT_SYMBOL_GPL(felix_register_switch); struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port) { @@ -2176,7 +2443,7 @@ struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port) if (!dsa_is_user_port(ds, port)) return NULL; - return dsa_to_port(ds, port)->slave; + return dsa_to_port(ds, port)->user; } EXPORT_SYMBOL_GPL(felix_port_to_netdev); diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h index 1d4befe7cfe8..a657b190c5d7 100644 --- a/drivers/net/dsa/ocelot/felix.h +++ b/drivers/net/dsa/ocelot/felix.h @@ -12,8 +12,9 @@ #define OCELOT_PORT_MODE_SGMII BIT(1) #define OCELOT_PORT_MODE_QSGMII BIT(2) #define OCELOT_PORT_MODE_2500BASEX BIT(3) -#define OCELOT_PORT_MODE_USXGMII BIT(4) +#define OCELOT_PORT_MODE_USXGMII BIT(4) /* compatibility */ #define OCELOT_PORT_MODE_1000BASEX BIT(5) +#define OCELOT_PORT_MODE_10G_QXGMII BIT(6) struct device_node; @@ -32,7 +33,6 @@ struct felix_info { const u32 *port_modes; int num_mact_rows; int num_ports; - int num_tx_queues; struct vcap_props *vcap; u16 vcap_pol_base; u16 vcap_pol_max; @@ -64,6 +64,7 @@ struct felix_info { const struct phylink_link_state *state); int (*configure_serdes)(struct ocelot *ocelot, int port, struct device_node *portnp); + int (*request_irq)(struct ocelot *ocelot); }; /* Methods for initializing the hardware resources specific to a tagging @@ -77,13 +78,11 @@ struct felix_tag_proto_ops { int (*setup)(struct dsa_switch *ds); void (*teardown)(struct dsa_switch *ds); unsigned long (*get_host_fwd_mask)(struct dsa_switch *ds); - int (*change_master)(struct dsa_switch *ds, int port, - struct net_device *master, - struct netlink_ext_ack *extack); + int (*change_conduit)(struct dsa_switch *ds, int port, + struct net_device *conduit, + struct netlink_ext_ack *extack); }; -extern const struct dsa_switch_ops felix_switch_ops; - /* DSA glue / front-end for struct ocelot */ struct felix { struct dsa_switch *ds; @@ -99,6 +98,11 @@ struct felix { unsigned long host_flood_mc_mask; }; +int felix_register_switch(struct device *dev, resource_size_t switch_base, + int num_flooding_pgids, bool ptp, + bool mm_supported, + enum dsa_tag_protocol init_tag_proto, + const struct felix_info *info); struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port); int felix_netdev_to_port(struct net_device *dev); diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 3c5509e75a54..8cf4c8986587 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -24,7 +24,7 @@ #define VSC9959_NUM_PORTS 6 #define VSC9959_TAS_GCL_ENTRY_MAX 63 -#define VSC9959_TAS_MIN_GATE_LEN_NS 33 +#define VSC9959_TAS_MIN_GATE_LEN_NS 35 #define VSC9959_VCAP_POLICER_BASE 63 #define VSC9959_VCAP_POLICER_MAX 383 #define VSC9959_SWITCH_PCI_BAR 4 @@ -34,7 +34,8 @@ OCELOT_PORT_MODE_QSGMII | \ OCELOT_PORT_MODE_1000BASEX | \ OCELOT_PORT_MODE_2500BASEX | \ - OCELOT_PORT_MODE_USXGMII) + OCELOT_PORT_MODE_USXGMII | \ + OCELOT_PORT_MODE_10G_QXGMII) static const u32 vsc9959_port_modes[VSC9959_NUM_PORTS] = { VSC9959_PORT_MODE_SERDES, @@ -1056,11 +1057,15 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot) mdiobus_free(felix->imdio); } -/* The switch considers any frame (regardless of size) as eligible for - * transmission if the traffic class gate is open for at least 33 ns. +/* The switch considers any frame (regardless of size) as eligible + * for transmission if the traffic class gate is open for at least + * VSC9959_TAS_MIN_GATE_LEN_NS. + * * Overruns are prevented by cropping an interval at the end of the gate time - * slot for which egress scheduling is blocked, but we need to still keep 33 ns - * available for one packet to be transmitted, otherwise the port tc will hang. + * slot for which egress scheduling is blocked, but we need to still keep + * VSC9959_TAS_MIN_GATE_LEN_NS available for one packet to be transmitted, + * otherwise the port tc will hang. + * * This function returns the size of a gate interval that remains available for * setting the guard band, after reserving the space for one egress frame. */ @@ -1303,7 +1308,8 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port) * per-tc static guard band lengths, so it reduces the * useful gate interval length. Therefore, be careful * to calculate a guard band (and therefore max_sdu) - * that still leaves 33 ns available in the time slot. + * that still leaves VSC9959_TAS_MIN_GATE_LEN_NS + * available in the time slot. */ max_sdu = div_u64(remaining_gate_len_ps, picos_per_byte); /* A TC gate may be completely closed, which is a @@ -1474,10 +1480,13 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port, /* Hardware errata - Admin config could not be overwritten if * config is pending, need reset the TAS module */ - val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8); - if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) { - ret = -EBUSY; - goto err_reset_tc; + val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port); + if (val & QSYS_TAG_CONFIG_ENABLE) { + val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8); + if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) { + ret = -EBUSY; + goto err_reset_tc; + } } ocelot_rmw_rix(ocelot, @@ -1535,7 +1544,7 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot) struct tc_taprio_qopt_offload *taprio; struct ocelot_port *ocelot_port; struct timespec64 base_ts; - int port; + int i, port; u32 val; mutex_lock(&ocelot->fwd_domain_lock); @@ -1567,6 +1576,9 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot) QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M, QSYS_PARAM_CFG_REG_3); + for (i = 0; i < taprio->num_entries; i++) + vsc9959_tas_gcl_set(ocelot, i, &taprio->entries[i]); + ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE, QSYS_TAS_PARAM_CFG_CTRL); @@ -1733,7 +1745,7 @@ struct felix_stream_gate { u64 cycletime; u64 cycletime_ext; u32 num_entries; - struct action_gate_entry entries[]; + struct action_gate_entry entries[] __counted_by(num_entries); }; struct felix_stream_gate_entry { @@ -1755,6 +1767,9 @@ static int vsc9959_stream_identify(struct flow_cls_offload *f, BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS))) return -EOPNOTSUPP; + if (flow_rule_match_has_control_flags(rule, f->common.extack)) + return -EOPNOTSUPP; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { struct flow_match_eth_addrs match; @@ -2602,6 +2617,28 @@ set: } } +/* The INTB interrupt is shared between for PTP TX timestamp availability + * notification and MAC Merge status change on each port. + */ +static irqreturn_t vsc9959_irq_handler(int irq, void *data) +{ + struct ocelot *ocelot = data; + + ocelot_get_txtstamp(ocelot); + ocelot_mm_irq(ocelot); + + return IRQ_HANDLED; +} + +static int vsc9959_request_irq(struct ocelot *ocelot) +{ + struct pci_dev *pdev = to_pci_dev(ocelot->dev); + + return devm_request_threaded_irq(ocelot->dev, pdev->irq, NULL, + &vsc9959_irq_handler, IRQF_ONESHOT, + "felix-intb", ocelot); +} + static const struct ocelot_ops vsc9959_ops = { .reset = vsc9959_reset, .wm_enc = vsc9959_wm_enc, @@ -2633,7 +2670,6 @@ static const struct felix_info felix_info_vsc9959 = { .vcap_pol_max2 = 0, .num_mact_rows = 2048, .num_ports = VSC9959_NUM_PORTS, - .num_tx_queues = OCELOT_NUM_TC, .quirks = FELIX_MAC_QUIRKS, .quirk_no_xtr_irq = true, .ptp_caps = &vsc9959_ptp_caps, @@ -2642,98 +2678,36 @@ static const struct felix_info felix_info_vsc9959 = { .port_modes = vsc9959_port_modes, .port_setup_tc = vsc9959_port_setup_tc, .port_sched_speed_set = vsc9959_sched_speed_set, + .request_irq = vsc9959_request_irq, }; -/* The INTB interrupt is shared between for PTP TX timestamp availability - * notification and MAC Merge status change on each port. - */ -static irqreturn_t felix_irq_handler(int irq, void *data) -{ - struct ocelot *ocelot = (struct ocelot *)data; - - ocelot_get_txtstamp(ocelot); - ocelot_mm_irq(ocelot); - - return IRQ_HANDLED; -} - static int felix_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - struct dsa_switch *ds; - struct ocelot *ocelot; - struct felix *felix; + struct device *dev = &pdev->dev; + resource_size_t switch_base; int err; - if (pdev->dev.of_node && !of_device_is_available(pdev->dev.of_node)) { - dev_info(&pdev->dev, "device is disabled, skipping\n"); - return -ENODEV; - } - err = pci_enable_device(pdev); if (err) { - dev_err(&pdev->dev, "device enable failed\n"); - goto err_pci_enable; - } - - felix = kzalloc(sizeof(struct felix), GFP_KERNEL); - if (!felix) { - err = -ENOMEM; - dev_err(&pdev->dev, "Failed to allocate driver memory\n"); - goto err_alloc_felix; + dev_err(dev, "device enable failed: %pe\n", ERR_PTR(err)); + return err; } - pci_set_drvdata(pdev, felix); - ocelot = &felix->ocelot; - ocelot->dev = &pdev->dev; - ocelot->num_flooding_pgids = OCELOT_NUM_TC; - felix->info = &felix_info_vsc9959; - felix->switch_base = pci_resource_start(pdev, VSC9959_SWITCH_PCI_BAR); - pci_set_master(pdev); - err = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL, - &felix_irq_handler, IRQF_ONESHOT, - "felix-intb", ocelot); - if (err) { - dev_err(&pdev->dev, "Failed to request irq\n"); - goto err_alloc_irq; - } - - ocelot->ptp = 1; - ocelot->mm_supported = true; + switch_base = pci_resource_start(pdev, VSC9959_SWITCH_PCI_BAR); - ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL); - if (!ds) { - err = -ENOMEM; - dev_err(&pdev->dev, "Failed to allocate DSA switch\n"); - goto err_alloc_ds; - } - - ds->dev = &pdev->dev; - ds->num_ports = felix->info->num_ports; - ds->num_tx_queues = felix->info->num_tx_queues; - ds->ops = &felix_switch_ops; - ds->priv = ocelot; - felix->ds = ds; - felix->tag_proto = DSA_TAG_PROTO_OCELOT; - - err = dsa_register_switch(ds); - if (err) { - dev_err_probe(&pdev->dev, err, "Failed to register DSA switch\n"); - goto err_register_ds; - } + err = felix_register_switch(dev, switch_base, OCELOT_NUM_TC, + true, true, DSA_TAG_PROTO_OCELOT, + &felix_info_vsc9959); + if (err) + goto out_disable; return 0; -err_register_ds: - kfree(ds); -err_alloc_ds: -err_alloc_irq: - kfree(felix); -err_alloc_felix: +out_disable: pci_disable_device(pdev); -err_pci_enable: return err; } @@ -2746,9 +2720,6 @@ static void felix_pci_remove(struct pci_dev *pdev) dsa_unregister_switch(felix->ds); - kfree(felix->ds); - kfree(felix); - pci_disable_device(pdev); } diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c index c29bee5a5c48..d5c557a20292 100644 --- a/drivers/net/dsa/ocelot/ocelot_ext.c +++ b/drivers/net/dsa/ocelot/ocelot_ext.c @@ -57,7 +57,6 @@ static const struct felix_info vsc7512_info = { .vcap = vsc7514_vcap_props, .num_mact_rows = 1024, .num_ports = VSC7514_NUM_PORTS, - .num_tx_queues = OCELOT_NUM_TC, .port_modes = vsc7512_port_modes, .phylink_mac_config = ocelot_phylink_mac_config, .configure_serdes = ocelot_port_configure_serdes, @@ -65,69 +64,18 @@ static const struct felix_info vsc7512_info = { static int ocelot_ext_probe(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct dsa_switch *ds; - struct ocelot *ocelot; - struct felix *felix; - int err; - - felix = kzalloc(sizeof(*felix), GFP_KERNEL); - if (!felix) - return -ENOMEM; - - dev_set_drvdata(dev, felix); - - ocelot = &felix->ocelot; - ocelot->dev = dev; - - ocelot->num_flooding_pgids = 1; - - felix->info = &vsc7512_info; - - ds = kzalloc(sizeof(*ds), GFP_KERNEL); - if (!ds) { - err = -ENOMEM; - dev_err_probe(dev, err, "Failed to allocate DSA switch\n"); - goto err_free_felix; - } - - ds->dev = dev; - ds->num_ports = felix->info->num_ports; - ds->num_tx_queues = felix->info->num_tx_queues; - - ds->ops = &felix_switch_ops; - ds->priv = ocelot; - felix->ds = ds; - felix->tag_proto = DSA_TAG_PROTO_OCELOT; - - err = dsa_register_switch(ds); - if (err) { - dev_err_probe(dev, err, "Failed to register DSA switch\n"); - goto err_free_ds; - } - - return 0; - -err_free_ds: - kfree(ds); -err_free_felix: - kfree(felix); - return err; + return felix_register_switch(&pdev->dev, 0, 1, false, false, + DSA_TAG_PROTO_OCELOT, &vsc7512_info); } -static int ocelot_ext_remove(struct platform_device *pdev) +static void ocelot_ext_remove(struct platform_device *pdev) { struct felix *felix = dev_get_drvdata(&pdev->dev); if (!felix) - return 0; + return; dsa_unregister_switch(felix->ds); - - kfree(felix->ds); - kfree(felix); - - return 0; } static void ocelot_ext_shutdown(struct platform_device *pdev) @@ -161,4 +109,4 @@ module_platform_driver(ocelot_ext_switch_driver); MODULE_DESCRIPTION("External Ocelot Switch driver"); MODULE_LICENSE("GPL"); -MODULE_IMPORT_NS(MFD_OCELOT); +MODULE_IMPORT_NS("MFD_OCELOT"); diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c index 8f912bda120b..eb3944ba2a72 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -963,7 +963,6 @@ static const struct felix_info seville_info_vsc9953 = { .quirks = FELIX_MAC_QUIRKS, .num_mact_rows = 2048, .num_ports = VSC9953_NUM_PORTS, - .num_tx_queues = OCELOT_NUM_TC, .mdio_bus_alloc = vsc9953_mdio_bus_alloc, .mdio_bus_free = vsc9953_mdio_bus_free, .port_modes = vsc9953_port_modes, @@ -971,77 +970,28 @@ static const struct felix_info seville_info_vsc9953 = { static int seville_probe(struct platform_device *pdev) { - struct dsa_switch *ds; - struct ocelot *ocelot; + struct device *dev = &pdev->dev; struct resource *res; - struct felix *felix; - int err; - - felix = kzalloc(sizeof(struct felix), GFP_KERNEL); - if (!felix) { - err = -ENOMEM; - dev_err(&pdev->dev, "Failed to allocate driver memory\n"); - goto err_alloc_felix; - } - - platform_set_drvdata(pdev, felix); - - ocelot = &felix->ocelot; - ocelot->dev = &pdev->dev; - ocelot->num_flooding_pgids = 1; - felix->info = &seville_info_vsc9953; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - err = -EINVAL; - dev_err(&pdev->dev, "Invalid resource\n"); - goto err_alloc_felix; - } - felix->switch_base = res->start; - - ds = kzalloc(sizeof(struct dsa_switch), GFP_KERNEL); - if (!ds) { - err = -ENOMEM; - dev_err(&pdev->dev, "Failed to allocate DSA switch\n"); - goto err_alloc_ds; + dev_err(dev, "Invalid resource\n"); + return -EINVAL; } - ds->dev = &pdev->dev; - ds->num_ports = felix->info->num_ports; - ds->ops = &felix_switch_ops; - ds->priv = ocelot; - felix->ds = ds; - felix->tag_proto = DSA_TAG_PROTO_SEVILLE; - - err = dsa_register_switch(ds); - if (err) { - dev_err(&pdev->dev, "Failed to register DSA switch: %d\n", err); - goto err_register_ds; - } - - return 0; - -err_register_ds: - kfree(ds); -err_alloc_ds: -err_alloc_felix: - kfree(felix); - return err; + return felix_register_switch(dev, res->start, 1, false, false, + DSA_TAG_PROTO_SEVILLE, + &seville_info_vsc9953); } -static int seville_remove(struct platform_device *pdev) +static void seville_remove(struct platform_device *pdev) { struct felix *felix = platform_get_drvdata(pdev); if (!felix) - return 0; + return; dsa_unregister_switch(felix->ds); - - kfree(felix->ds); - kfree(felix); - - return 0; } static void seville_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index 8d9d271ac3af..0526aa96146e 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -523,28 +523,30 @@ static void ar9331_sw_phylink_get_caps(struct dsa_switch *ds, int port, } } -static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port, +static void ar9331_sw_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct ar9331_sw_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ar9331_sw_priv *priv = dp->ds->priv; struct regmap *regmap = priv->regmap; int ret; - ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), + ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(dp->index), AR9331_SW_PORT_STATUS_LINK_EN | AR9331_SW_PORT_STATUS_FLOW_LINK_EN, 0); if (ret) dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); } -static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void ar9331_sw_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct ar9331_sw_priv *priv = ds->priv; - struct ar9331_sw_port *p = &priv->port[port]; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ar9331_sw_priv *priv = dp->ds->priv; struct regmap *regmap = priv->regmap; + int port = dp->index; int ret; ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port), @@ -552,23 +554,24 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port, if (ret) dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret); - cancel_delayed_work_sync(&p->mib_read); + cancel_delayed_work_sync(&priv->port[port].mib_read); } -static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void ar9331_sw_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct ar9331_sw_priv *priv = ds->priv; - struct ar9331_sw_port *p = &priv->port[port]; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ar9331_sw_priv *priv = dp->ds->priv; struct regmap *regmap = priv->regmap; + int port = dp->index; u32 val; int ret; - schedule_delayed_work(&p->mib_read, 0); + schedule_delayed_work(&priv->port[port].mib_read, 0); val = AR9331_SW_PORT_STATUS_MAC_MASK; switch (speed) { @@ -684,14 +687,17 @@ static void ar9331_get_pause_stats(struct dsa_switch *ds, int port, spin_unlock(&p->stats_lock); } +static const struct phylink_mac_ops ar9331_phylink_mac_ops = { + .mac_config = ar9331_sw_phylink_mac_config, + .mac_link_down = ar9331_sw_phylink_mac_link_down, + .mac_link_up = ar9331_sw_phylink_mac_link_up, +}; + static const struct dsa_switch_ops ar9331_sw_ops = { .get_tag_protocol = ar9331_sw_get_tag_protocol, .setup = ar9331_sw_setup, .port_disable = ar9331_sw_port_disable, .phylink_get_caps = ar9331_sw_phylink_get_caps, - .phylink_mac_config = ar9331_sw_phylink_mac_config, - .phylink_mac_link_down = ar9331_sw_phylink_mac_link_down, - .phylink_mac_link_up = ar9331_sw_phylink_mac_link_up, .get_stats64 = ar9331_get_stats64, .get_pause_stats = ar9331_get_pause_stats, }; @@ -815,8 +821,8 @@ static int ar9331_sw_irq_init(struct ar9331_sw_priv *priv) return ret; } - priv->irqdomain = irq_domain_add_linear(np, 1, &ar9331_sw_irqdomain_ops, - priv); + priv->irqdomain = irq_domain_create_linear(dev_fwnode(dev), 1, &ar9331_sw_irqdomain_ops, + priv); if (!priv->irqdomain) { dev_err(dev, "failed to create IRQ domain\n"); return -EINVAL; @@ -1015,7 +1021,7 @@ static const struct regmap_config ar9331_mdio_regmap_config = { .cache_type = REGCACHE_MAPLE, }; -static struct regmap_bus ar9331_sw_bus = { +static const struct regmap_bus ar9331_sw_bus = { .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, .val_format_endian_default = REGMAP_ENDIAN_NATIVE, .read = ar9331_mdio_read, @@ -1059,6 +1065,7 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev) ds->priv = priv; priv->ops = ar9331_sw_ops; ds->ops = &priv->ops; + ds->phylink_mac_ops = &ar9331_phylink_mac_ops; dev_set_drvdata(&mdiodev->dev, priv); for (i = 0; i < ARRAY_SIZE(priv->port); i++) { diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index de1dc22cf683..a36b8b07030e 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -323,14 +323,14 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) mutex_lock(&mgmt_eth_data->mutex); - /* Check mgmt_master if is operational */ - if (!priv->mgmt_master) { + /* Check if the mgmt_conduit if is operational */ + if (!priv->mgmt_conduit) { kfree_skb(skb); mutex_unlock(&mgmt_eth_data->mutex); return -EINVAL; } - skb->dev = priv->mgmt_master; + skb->dev = priv->mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); @@ -342,7 +342,7 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, - msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + QCA8K_ETHERNET_TIMEOUT); *val = mgmt_eth_data->data[0]; if (len > QCA_HDR_MGMT_DATA1_LEN) @@ -375,14 +375,14 @@ static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) mutex_lock(&mgmt_eth_data->mutex); - /* Check mgmt_master if is operational */ - if (!priv->mgmt_master) { + /* Check if the mgmt_conduit if is operational */ + if (!priv->mgmt_conduit) { kfree_skb(skb); mutex_unlock(&mgmt_eth_data->mutex); return -EINVAL; } - skb->dev = priv->mgmt_master; + skb->dev = priv->mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); @@ -394,7 +394,7 @@ static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, - msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + QCA8K_ETHERNET_TIMEOUT); ack = mgmt_eth_data->ack; @@ -505,10 +505,10 @@ qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len, void *val_buf, size_t val_len) { int i, count = val_len / sizeof(u32), ret; - u32 reg = *(u32 *)reg_buf & U16_MAX; struct qca8k_priv *priv = ctx; + u32 reg = *(u16 *)reg_buf; - if (priv->mgmt_master && + if (priv->mgmt_conduit && !qca8k_read_eth(priv, reg, val_buf, val_len)) return 0; @@ -527,11 +527,11 @@ qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len, const void *val_buf, size_t val_len) { int i, count = val_len / sizeof(u32), ret; - u32 reg = *(u32 *)reg_buf & U16_MAX; struct qca8k_priv *priv = ctx; + u32 reg = *(u16 *)reg_buf; u32 *val = (u32 *)val_buf; - if (priv->mgmt_master && + if (priv->mgmt_conduit && !qca8k_write_eth(priv, reg, val, val_len)) return 0; @@ -565,7 +565,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_ return qca8k_regmap_update_bits_mii(priv, reg, mask, write_val); } -static struct regmap_config qca8k_regmap_config = { +static const struct regmap_config qca8k_regmap_config = { .reg_bits = 16, .val_bits = 32, .reg_stride = 4, @@ -626,7 +626,7 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, struct sk_buff *write_skb, *clear_skb, *read_skb; struct qca8k_mgmt_eth_data *mgmt_eth_data; u32 write_val, clear_val = 0, val; - struct net_device *mgmt_master; + struct net_device *mgmt_conduit; int ret, ret1; bool ack; @@ -666,6 +666,15 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, goto err_read_skb; } + /* It seems that accessing the switch's internal PHYs via management + * packets still uses the MDIO bus within the switch internally, and + * these accesses can conflict with external MDIO accesses to other + * devices on the MDIO bus. + * We therefore need to lock the MDIO bus onto which the switch is + * connected. + */ + mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); + /* Actually start the request: * 1. Send mdio master packet * 2. Busy Wait for mdio master command @@ -674,17 +683,18 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy, */ mutex_lock(&mgmt_eth_data->mutex); - /* Check if mgmt_master is operational */ - mgmt_master = priv->mgmt_master; - if (!mgmt_master) { + /* Check if mgmt_conduit is operational */ + mgmt_conduit = priv->mgmt_conduit; + if (!mgmt_conduit) { mutex_unlock(&mgmt_eth_data->mutex); + mutex_unlock(&priv->bus->mdio_lock); ret = -EINVAL; - goto err_mgmt_master; + goto err_mgmt_conduit; } - read_skb->dev = mgmt_master; - clear_skb->dev = mgmt_master; - write_skb->dev = mgmt_master; + read_skb->dev = mgmt_conduit; + clear_skb->dev = mgmt_conduit; + write_skb->dev = mgmt_conduit; reinit_completion(&mgmt_eth_data->rw_done); @@ -765,11 +775,12 @@ exit: QCA8K_ETHERNET_TIMEOUT); mutex_unlock(&mgmt_eth_data->mutex); + mutex_unlock(&priv->bus->mdio_lock); return ret; /* Error handling before lock */ -err_mgmt_master: +err_mgmt_conduit: kfree_skb(read_skb); err_read_skb: kfree_skb(clear_skb); @@ -936,36 +947,48 @@ static int qca8k_mdio_register(struct qca8k_priv *priv) { struct dsa_switch *ds = priv->ds; + struct device *dev = ds->dev; struct device_node *mdio; struct mii_bus *bus; + int ret = 0; - bus = devm_mdiobus_alloc(ds->dev); - if (!bus) - return -ENOMEM; + mdio = of_get_child_by_name(dev->of_node, "mdio"); + if (mdio && !of_device_is_available(mdio)) + goto out_put_node; + bus = devm_mdiobus_alloc(dev); + if (!bus) { + ret = -ENOMEM; + goto out_put_node; + } + + priv->internal_mdio_bus = bus; bus->priv = (void *)priv; snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d", ds->dst->index, ds->index); - bus->parent = ds->dev; - bus->phy_mask = ~ds->phys_mii_mask; - ds->slave_mii_bus = bus; - - /* Check if the devicetree declare the port:phy mapping */ - mdio = of_get_child_by_name(priv->dev->of_node, "mdio"); - if (of_device_is_available(mdio)) { - bus->name = "qca8k slave mii"; + bus->parent = dev; + + if (mdio) { + /* Check if the device tree declares the port:phy mapping */ + bus->name = "qca8k user mii"; bus->read = qca8k_internal_mdio_read; bus->write = qca8k_internal_mdio_write; - return devm_of_mdiobus_register(priv->dev, bus, mdio); + } else { + /* If a mapping can't be found, the legacy mapping is used, + * using qca8k_port_to_phy() + */ + ds->user_mii_bus = bus; + bus->phy_mask = ~ds->phys_mii_mask; + bus->name = "qca8k-legacy user mii"; + bus->read = qca8k_legacy_mdio_read; + bus->write = qca8k_legacy_mdio_write; } - /* If a mapping can't be found the legacy mapping is used, - * using the qca8k_port_to_phy function - */ - bus->name = "qca8k-legacy slave mii"; - bus->read = qca8k_legacy_mdio_read; - bus->write = qca8k_legacy_mdio_write; - return devm_mdiobus_register(priv->dev, bus); + ret = devm_of_mdiobus_register(dev, bus, mdio); + +out_put_node: + of_node_put(mdio); + return ret; } static int @@ -974,7 +997,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg; struct device_node *ports, *port; phy_interface_t mode; - int err; + int ret; ports = of_get_child_by_name(priv->dev->of_node, "ports"); if (!ports) @@ -984,11 +1007,11 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) return -EINVAL; for_each_available_child_of_node(ports, port) { - err = of_property_read_u32(port, "reg", ®); - if (err) { + ret = of_property_read_u32(port, "reg", ®); + if (ret) { of_node_put(port); of_node_put(ports); - return err; + return ret; } if (!dsa_is_user_port(priv->ds, reg)) @@ -996,7 +1019,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) of_get_phy_mode(port, &mode); - if (of_property_read_bool(port, "phy-handle") && + if (of_property_present(port, "phy-handle") && mode != PHY_INTERFACE_MODE_INTERNAL) external_mdio_mask |= BIT(reg); else @@ -1260,11 +1283,13 @@ qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_inde } static struct phylink_pcs * -qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port, +qca8k_phylink_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { - struct qca8k_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct qca8k_priv *priv = dp->ds->priv; struct phylink_pcs *pcs = NULL; + int port = dp->index; switch (interface) { case PHY_INTERFACE_MODE_SGMII: @@ -1288,13 +1313,18 @@ qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port, } static void -qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, +qca8k_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct qca8k_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct dsa_switch *ds = dp->ds; + struct qca8k_priv *priv; + int port = dp->index; int cpu_port_index; u32 reg; + priv = ds->priv; + switch (port) { case 0: /* 1st CPU port */ if (state->interface != PHY_INTERFACE_MODE_RGMII && @@ -1403,20 +1433,24 @@ static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port, } static void -qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, +qca8k_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct qca8k_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct qca8k_priv *priv = dp->ds->priv; - qca8k_port_set_status(priv, port, 0); + qca8k_port_set_status(priv, dp->index, 0); } static void -qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface, struct phy_device *phydev, - int speed, int duplex, bool tx_pause, bool rx_pause) +qca8k_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) { - struct qca8k_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct qca8k_priv *priv = dp->ds->priv; + int port = dp->index; u32 reg; if (phylink_autoneg_inband(mode)) { @@ -1440,10 +1474,10 @@ qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, if (duplex == DUPLEX_FULL) reg |= QCA8K_PORT_STATUS_DUPLEX; - if (rx_pause || dsa_is_cpu_port(ds, port)) + if (rx_pause || dsa_port_is_cpu(dp)) reg |= QCA8K_PORT_STATUS_RXFLOW; - if (tx_pause || dsa_is_cpu_port(ds, port)) + if (tx_pause || dsa_port_is_cpu(dp)) reg |= QCA8K_PORT_STATUS_TXFLOW; } @@ -1457,7 +1491,7 @@ static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) return container_of(pcs, struct qca8k_pcs, pcs); } -static void qca8k_pcs_get_state(struct phylink_pcs *pcs, +static void qca8k_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, struct phylink_link_state *state) { struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; @@ -1600,7 +1634,6 @@ static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, int port) { qpcs->pcs.ops = &qca8k_pcs_ops; - qpcs->pcs.neg_mode = true; /* We don't have interrupts for link changes, so we need to poll */ qpcs->pcs.poll = true; @@ -1717,10 +1750,10 @@ qca8k_get_tag_protocol(struct dsa_switch *ds, int port, } static void -qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, - bool operational) +qca8k_conduit_change(struct dsa_switch *ds, const struct net_device *conduit, + bool operational) { - struct dsa_port *dp = master->dsa_ptr; + struct dsa_port *dp = conduit->dsa_ptr; struct qca8k_priv *priv = ds->priv; /* Ethernet MIB/MDIO is only supported for CPU port 0 */ @@ -1730,7 +1763,7 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master, mutex_lock(&priv->mgmt_eth_data.mutex); mutex_lock(&priv->mib_eth_data.mutex); - priv->mgmt_master = operational ? (struct net_device *)master : NULL; + priv->mgmt_conduit = operational ? (struct net_device *)conduit : NULL; mutex_unlock(&priv->mib_eth_data.mutex); mutex_unlock(&priv->mgmt_eth_data.mutex); @@ -1968,6 +2001,13 @@ qca8k_setup(struct dsa_switch *ds) return 0; } +static const struct phylink_mac_ops qca8k_phylink_mac_ops = { + .mac_select_pcs = qca8k_phylink_mac_select_pcs, + .mac_config = qca8k_phylink_mac_config, + .mac_link_down = qca8k_phylink_mac_link_down, + .mac_link_up = qca8k_phylink_mac_link_up, +}; + static const struct dsa_switch_ops qca8k_switch_ops = { .get_tag_protocol = qca8k_get_tag_protocol, .setup = qca8k_setup, @@ -1975,7 +2015,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .get_ethtool_stats = qca8k_get_ethtool_stats, .get_sset_count = qca8k_get_sset_count, .set_ageing_time = qca8k_set_ageing_time, - .get_mac_eee = qca8k_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = qca8k_set_mac_eee, .port_enable = qca8k_port_enable, .port_disable = qca8k_port_disable, @@ -1998,14 +2038,10 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .port_vlan_add = qca8k_port_vlan_add, .port_vlan_del = qca8k_port_vlan_del, .phylink_get_caps = qca8k_phylink_get_caps, - .phylink_mac_select_pcs = qca8k_phylink_mac_select_pcs, - .phylink_mac_config = qca8k_phylink_mac_config, - .phylink_mac_link_down = qca8k_phylink_mac_link_down, - .phylink_mac_link_up = qca8k_phylink_mac_link_up, .get_phy_flags = qca8k_get_phy_flags, .port_lag_join = qca8k_port_lag_join, .port_lag_leave = qca8k_port_lag_leave, - .master_state_change = qca8k_master_change, + .conduit_state_change = qca8k_conduit_change, .connect_tag_protocol = qca8k_connect_tag_protocol, }; @@ -2027,12 +2063,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev) priv->info = of_device_get_match_data(priv->dev); priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset", - GPIOD_ASIS); + GPIOD_OUT_HIGH); if (IS_ERR(priv->reset_gpio)) return PTR_ERR(priv->reset_gpio); if (priv->reset_gpio) { - gpiod_set_value_cansleep(priv->reset_gpio, 1); /* The active low duration must be greater than 10 ms * and checkpatch.pl wants 20 ms. */ @@ -2069,6 +2104,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev) priv->ds->num_ports = QCA8K_NUM_PORTS; priv->ds->priv = priv; priv->ds->ops = &qca8k_switch_ops; + priv->ds->phylink_mac_ops = &qca8k_phylink_mac_ops; mutex_init(&priv->reg_mutex); dev_set_drvdata(&mdiodev->dev, priv); diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c index fce04ce12cf9..13005f10edb7 100644 --- a/drivers/net/dsa/qca/qca8k-common.c +++ b/drivers/net/dsa/qca/qca8k-common.c @@ -487,8 +487,7 @@ void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, return; for (i = 0; i < priv->info->mib_count; i++) - strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name, - ETH_GSTRING_LEN); + ethtool_puts(&data, ar8327_mib[i].name); } void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, @@ -500,7 +499,7 @@ void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, u32 hi = 0; int ret; - if (priv->mgmt_master && priv->info->ops->autocast_mib && + if (priv->mgmt_conduit && priv->info->ops->autocast_mib && priv->info->ops->autocast_mib(ds, port, data) > 0) return; @@ -535,7 +534,7 @@ int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset) } int qca8k_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *eee) + struct ethtool_keee *eee) { u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port); struct qca8k_priv *priv = ds->priv; @@ -558,13 +557,6 @@ exit: return ret; } -int qca8k_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - /* Nothing to do on the port's MAC */ - return 0; -} - static int qca8k_port_configure_learning(struct dsa_switch *ds, int port, bool learning) { @@ -615,11 +607,57 @@ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) qca8k_port_configure_learning(ds, port, learning); } +static int qca8k_update_port_member(struct qca8k_priv *priv, int port, + const struct net_device *bridge_dev, + bool join) +{ + bool isolated = !!(priv->port_isolated_map & BIT(port)), other_isolated; + struct dsa_port *dp = dsa_to_port(priv->ds, port), *other_dp; + u32 port_mask = BIT(dp->cpu_dp->index); + int i, ret; + + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + if (i == port) + continue; + if (dsa_is_cpu_port(priv->ds, i)) + continue; + + other_dp = dsa_to_port(priv->ds, i); + if (!dsa_port_offloads_bridge_dev(other_dp, bridge_dev)) + continue; + + other_isolated = !!(priv->port_isolated_map & BIT(i)); + + /* Add/remove this port to/from the portvlan mask of the other + * ports in the bridge + */ + if (join && !(isolated && other_isolated)) { + port_mask |= BIT(i); + ret = regmap_set_bits(priv->regmap, + QCA8K_PORT_LOOKUP_CTRL(i), + BIT(port)); + } else { + ret = regmap_clear_bits(priv->regmap, + QCA8K_PORT_LOOKUP_CTRL(i), + BIT(port)); + } + + if (ret) + return ret; + } + + /* Add/remove all other ports to/from this port's portvlan mask */ + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), + QCA8K_PORT_LOOKUP_MEMBER, port_mask); + + return ret; +} + int qca8k_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~BR_LEARNING) + if (flags.mask & ~(BR_LEARNING | BR_ISOLATED)) return -EINVAL; return 0; @@ -629,6 +667,7 @@ int qca8k_port_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { + struct qca8k_priv *priv = ds->priv; int ret; if (flags.mask & BR_LEARNING) { @@ -638,6 +677,20 @@ int qca8k_port_bridge_flags(struct dsa_switch *ds, int port, return ret; } + if (flags.mask & BR_ISOLATED) { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bridge_dev = dsa_port_bridge_dev_get(dp); + + if (flags.val & BR_ISOLATED) + priv->port_isolated_map |= BIT(port); + else + priv->port_isolated_map &= ~BIT(port); + + ret = qca8k_update_port_member(priv, port, bridge_dev, true); + if (ret) + return ret; + } + return 0; } @@ -647,62 +700,21 @@ int qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct netlink_ext_ack *extack) { struct qca8k_priv *priv = ds->priv; - int port_mask, cpu_port; - int i, ret; - - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - port_mask = BIT(cpu_port); - - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) - continue; - /* Add this port to the portvlan mask of the other ports - * in the bridge - */ - ret = regmap_set_bits(priv->regmap, - QCA8K_PORT_LOOKUP_CTRL(i), - BIT(port)); - if (ret) - return ret; - if (i != port) - port_mask |= BIT(i); - } - - /* Add all other ports to this ports portvlan mask */ - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_MEMBER, port_mask); - return ret; + return qca8k_update_port_member(priv, port, bridge.dev, true); } void qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) { struct qca8k_priv *priv = ds->priv; - int cpu_port, i; - - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + int err; - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) - continue; - /* Remove this port to the portvlan mask of the other ports - * in the bridge - */ - regmap_clear_bits(priv->regmap, - QCA8K_PORT_LOOKUP_CTRL(i), - BIT(port)); - } - - /* Set the cpu port to be the only one in the portvlan mask of - * this port - */ - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); + err = qca8k_update_port_member(priv, port, bridge.dev, false); + if (err) + dev_err(priv->dev, + "Failed to update switch config for bridge leave: %d\n", + err); } void qca8k_port_fast_age(struct dsa_switch *ds, int port) @@ -762,7 +774,7 @@ int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) int ret; /* We have only have a general MTU setting. - * DSA always set the CPU port's MTU to the largest MTU of the slave + * DSA always set the CPU port's MTU to the largest MTU of the user * ports. * Setting MTU just for the CPU port is sufficient to correctly set a * value for every port. diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c index e8c16e76e34b..43ac68052baf 100644 --- a/drivers/net/dsa/qca/qca8k-leds.c +++ b/drivers/net/dsa/qca/qca8k-leds.c @@ -356,8 +356,8 @@ static struct device *qca8k_cled_hw_control_get_device(struct led_classdev *ldev dp = dsa_to_port(priv->ds, qca8k_phy_to_port(led->port_num)); if (!dp) return NULL; - if (dp->slave) - return &dp->slave->dev; + if (dp->user) + return &dp->user->dev; return NULL; } @@ -366,7 +366,6 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p { struct fwnode_handle *led = NULL, *leds = NULL; struct led_init_data init_data = { }; - struct dsa_switch *ds = priv->ds; enum led_default_state state; struct qca8k_led *port_led; int led_num, led_index; @@ -429,10 +428,14 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p init_data.default_label = ":port"; init_data.fwnode = led; init_data.devname_mandatory = true; - init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id, + init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", + priv->internal_mdio_bus->id, port_num); - if (!init_data.devicename) + if (!init_data.devicename) { + fwnode_handle_put(led); + fwnode_handle_put(leds); return -ENOMEM; + } ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data); if (ret) @@ -441,6 +444,7 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p kfree(init_data.devicename); } + fwnode_handle_put(leds); return 0; } @@ -471,9 +475,13 @@ qca8k_setup_led_ctrl(struct qca8k_priv *priv) * the correct port for LED setup. */ ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num)); - if (ret) + if (ret) { + fwnode_handle_put(port); + fwnode_handle_put(ports); return ret; + } } + fwnode_handle_put(ports); return 0; } diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h index 8f88b7db384d..d046679265fa 100644 --- a/drivers/net/dsa/qca/qca8k.h +++ b/drivers/net/dsa/qca/qca8k.h @@ -16,7 +16,7 @@ #define QCA8K_ETHERNET_MDIO_PRIORITY 7 #define QCA8K_ETHERNET_PHY_PRIORITY 6 -#define QCA8K_ETHERNET_TIMEOUT 5 +#define QCA8K_ETHERNET_TIMEOUT msecs_to_jiffies(5) #define QCA8K_NUM_PORTS 7 #define QCA8K_NUM_CPU_PORTS 2 @@ -451,14 +451,16 @@ struct qca8k_priv { * Bit 1: port enabled. Bit 0: port disabled. */ u8 port_enabled_map; + u8 port_isolated_map; struct qca8k_ports_config ports_config; struct regmap *regmap; struct mii_bus *bus; + struct mii_bus *internal_mdio_bus; struct dsa_switch *ds; struct mutex reg_mutex; struct device *dev; struct gpio_desc *reset_gpio; - struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */ + struct net_device *mgmt_conduit; /* Track if mdio/mib Ethernet is available */ struct qca8k_mgmt_eth_data mgmt_eth_data; struct qca8k_mib_eth_data mib_eth_data; struct qca8k_mdio_cache mdio_cache; @@ -517,8 +519,7 @@ void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset); /* Common eee function */ -int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee); -int qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e); +int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *eee); /* Common bridge function */ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state); diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig index 060165a85fb7..d6eb6713e5f6 100644 --- a/drivers/net/dsa/realtek/Kconfig +++ b/drivers/net/dsa/realtek/Kconfig @@ -16,39 +16,37 @@ menuconfig NET_DSA_REALTEK if NET_DSA_REALTEK config NET_DSA_REALTEK_MDIO - tristate "Realtek MDIO interface driver" + bool "Realtek MDIO interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches configured through MDIO. config NET_DSA_REALTEK_SMI - tristate "Realtek SMI interface driver" + bool "Realtek SMI interface support" depends on OF - depends on NET_DSA_REALTEK_RTL8365MB || NET_DSA_REALTEK_RTL8366RB - depends on NET_DSA_REALTEK_RTL8365MB || !NET_DSA_REALTEK_RTL8365MB - depends on NET_DSA_REALTEK_RTL8366RB || !NET_DSA_REALTEK_RTL8366RB help Select to enable support for registering switches connected through SMI. config NET_DSA_REALTEK_RTL8365MB - tristate "Realtek RTL8365MB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8365MB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL8_4 help Select to enable support for Realtek RTL8365MB-VC and RTL8367S. config NET_DSA_REALTEK_RTL8366RB - tristate "Realtek RTL8366RB switch subdriver" - imply NET_DSA_REALTEK_SMI - imply NET_DSA_REALTEK_MDIO + tristate "Realtek RTL8366RB switch driver" + depends on NET_DSA_REALTEK_SMI || NET_DSA_REALTEK_MDIO select NET_DSA_TAG_RTL4_A help Select to enable support for Realtek RTL8366RB. +config NET_DSA_REALTEK_RTL8366RB_LEDS + bool + depends on (LEDS_CLASS=y || LEDS_CLASS=NET_DSA_REALTEK_RTL8366RB) + depends on NET_DSA_REALTEK_RTL8366RB + default NET_DSA_REALTEK_RTL8366RB + endif diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 0aab57252a7c..17367bcba496 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -1,6 +1,18 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_NET_DSA_REALTEK_MDIO) += realtek-mdio.o -obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o +obj-$(CONFIG_NET_DSA_REALTEK) += realtek_dsa.o +realtek_dsa-objs := rtl83xx.o + +ifdef CONFIG_NET_DSA_REALTEK_MDIO +realtek_dsa-objs += realtek-mdio.o +endif + +ifdef CONFIG_NET_DSA_REALTEK_SMI +realtek_dsa-objs += realtek-smi.o +endif + obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o rtl8366-objs := rtl8366-core.o rtl8366rb.o +ifdef CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS +rtl8366-objs += rtl8366rb-leds.o +endif obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 292e6d087e8b..a5e7dff96e91 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -25,6 +25,8 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Read/write via mdiobus */ #define REALTEK_MDIO_CTRL0_REG 31 @@ -99,192 +101,87 @@ out_unlock: return ret; } -static void realtek_mdio_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_mdio_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_mdio_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_mdio_info = { .reg_read = realtek_mdio_read, .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_mdio_lock, - .unlock = realtek_mdio_unlock, }; -static const struct regmap_config realtek_mdio_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_mdio_read, - .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_mdio_probe(struct mdio_device *mdiodev) +/** + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch + * @mdiodev: mdio_device to probe on. + * + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_mdio_probe(struct mdio_device *mdiodev) { - struct realtek_priv *priv; struct device *dev = &mdiodev->dev; - const struct realtek_variant *var; - struct regmap_config rc; - struct device_node *np; + struct realtek_priv *priv; int ret; - var = of_device_get_match_data(dev); - if (!var) - return -EINVAL; - - priv = devm_kzalloc(&mdiodev->dev, - size_add(sizeof(*priv), var->chip_data_sz), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_init(&priv->map_lock); + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); - rc = realtek_mdio_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_mdio_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - priv->mdio_addr = mdiodev->addr; priv->bus = mdiodev->bus; - priv->dev = &mdiodev->dev; - priv->chip_data = (void *)priv + sizeof(*priv); - - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - + priv->mdio_addr = mdiodev->addr; priv->write_reg_noack = realtek_mdio_write; - np = dev->of_node; - - dev_set_drvdata(dev, priv); - - /* TODO: if power is software controlled, set up any regulators here */ - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - priv->ds->ops = var->ds_ops_mdio; - - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + rtl83xx_remove(priv); return ret; } return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, "REALTEK_DSA"); -static void realtek_mdio_remove(struct mdio_device *mdiodev) +/** + * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch + * @mdiodev: mdio_device to be removed. + * + * This function should be used as the .remove in an mdio_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_remove(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_unregister_switch(priv->ds); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, "REALTEK_DSA"); -static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +/** + * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch + * @mdiodev: mdio_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_shutdown(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - dev_set_drvdata(&mdiodev->dev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_mdio_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); - -static struct mdio_driver realtek_mdio_driver = { - .mdiodrv.driver = { - .name = "realtek-mdio", - .of_match_table = realtek_mdio_of_match, - }, - .probe = realtek_mdio_probe, - .remove = realtek_mdio_remove, - .shutdown = realtek_mdio_shutdown, -}; - -mdio_module_driver(realtek_mdio_driver); - -MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/realtek-mdio.h b/drivers/net/dsa/realtek/realtek-mdio.h new file mode 100644 index 000000000000..ee70f6a5b8ff --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-mdio.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_MDIO_H +#define _REALTEK_MDIO_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return mdio_driver_register(drv); +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ + mdio_driver_unregister(drv); +} + +int realtek_mdio_probe(struct mdio_device *mdiodev); +void realtek_mdio_remove(struct mdio_device *mdiodev); +void realtek_mdio_shutdown(struct mdio_device *mdiodev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +static inline int realtek_mdio_driver_register(struct mdio_driver *drv) +{ + return 0; +} + +static inline void realtek_mdio_driver_unregister(struct mdio_driver *drv) +{ +} + +static inline int realtek_mdio_probe(struct mdio_device *mdiodev) +{ + return -ENOENT; +} + +static inline void realtek_mdio_remove(struct mdio_device *mdiodev) +{ +} + +static inline void realtek_mdio_shutdown(struct mdio_device *mdiodev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_MDIO) */ + +#endif /* _REALTEK_MDIO_H */ diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c index ff13563059c5..972e22218418 100644 --- a/drivers/net/dsa/realtek/realtek-smi.c +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -31,7 +31,6 @@ #include <linux/spinlock.h> #include <linux/skbuff.h> #include <linux/of.h> -#include <linux/of_mdio.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> @@ -40,12 +39,14 @@ #include <linux/if_bridge.h> #include "realtek.h" +#include "realtek-smi.h" +#include "rtl83xx.h" #define REALTEK_SMI_ACK_RETRY_COUNT 5 static inline void realtek_smi_clk_delay(struct realtek_priv *priv) { - ndelay(priv->clk_delay); + ndelay(priv->variant->clk_delay); } static void realtek_smi_start(struct realtek_priv *priv) @@ -208,7 +209,7 @@ static int realtek_smi_read_reg(struct realtek_priv *priv, u32 addr, u32 *data) realtek_smi_start(priv); /* Send READ command */ - ret = realtek_smi_write_byte(priv, priv->cmd_read); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_read); if (ret) goto out; @@ -249,7 +250,7 @@ static int realtek_smi_write_reg(struct realtek_priv *priv, realtek_smi_start(priv); /* Send WRITE command */ - ret = realtek_smi_write_byte(priv, priv->cmd_write); + ret = realtek_smi_write_byte(priv, priv->variant->cmd_write); if (ret) goto out; @@ -310,260 +311,98 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val) return realtek_smi_read_reg(priv, reg, val); } -static void realtek_smi_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_smi_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_smi_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_smi_info = { .reg_read = realtek_smi_read, .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_smi_lock, - .unlock = realtek_smi_unlock, }; -static const struct regmap_config realtek_smi_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_smi_read, - .reg_write = realtek_smi_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_read(priv, addr, regnum); -} - -static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum, - u16 val) -{ - struct realtek_priv *priv = bus->priv; - - return priv->ops->phy_write(priv, addr, regnum, val); -} - -static int realtek_smi_setup_mdio(struct dsa_switch *ds) -{ - struct realtek_priv *priv = ds->priv; - struct device_node *mdio_np; - int ret; - - mdio_np = of_get_compatible_child(priv->dev->of_node, "realtek,smi-mdio"); - if (!mdio_np) { - dev_err(priv->dev, "no MDIO bus node\n"); - return -ENODEV; - } - - priv->slave_mii_bus = devm_mdiobus_alloc(priv->dev); - if (!priv->slave_mii_bus) { - ret = -ENOMEM; - goto err_put_node; - } - priv->slave_mii_bus->priv = priv; - priv->slave_mii_bus->name = "SMI slave MII"; - priv->slave_mii_bus->read = realtek_smi_mdio_read; - priv->slave_mii_bus->write = realtek_smi_mdio_write; - snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d", - ds->index); - priv->slave_mii_bus->dev.of_node = mdio_np; - priv->slave_mii_bus->parent = priv->dev; - ds->slave_mii_bus = priv->slave_mii_bus; - - ret = devm_of_mdiobus_register(priv->dev, priv->slave_mii_bus, mdio_np); - if (ret) { - dev_err(priv->dev, "unable to register MDIO bus %s\n", - priv->slave_mii_bus->id); - goto err_put_node; - } - - return 0; - -err_put_node: - of_node_put(mdio_np); - - return ret; -} - -static int realtek_smi_probe(struct platform_device *pdev) +/** + * realtek_smi_probe() - Probe a platform device for an SMI-connected switch + * @pdev: platform_device to probe on. + * + * This function should be used as the .probe in a platform_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for SMI-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_smi_probe(struct platform_device *pdev) { - const struct realtek_variant *var; struct device *dev = &pdev->dev; struct realtek_priv *priv; - struct regmap_config rc; - struct device_node *np; int ret; - var = of_device_get_match_data(dev); - np = dev->of_node; - - priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->chip_data = (void *)priv + sizeof(*priv); - - mutex_init(&priv->map_lock); - - rc = realtek_smi_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_smi_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - /* Link forward and backward */ - priv->dev = dev; - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - - priv->setup_interface = realtek_smi_setup_mdio; - priv->write_reg_noack = realtek_smi_write_reg_noack; - - dev_set_drvdata(dev, priv); - spin_lock_init(&priv->lock); - - /* TODO: if power is software controlled, set up any regulators here */ - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } + priv = rtl83xx_probe(dev, &realtek_smi_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); /* Fetch MDIO pins */ priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdc)) + if (IS_ERR(priv->mdc)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdc); + } + priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); - if (IS_ERR(priv->mdio)) + if (IS_ERR(priv->mdio)) { + rtl83xx_remove(priv); return PTR_ERR(priv->mdio); - - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; } - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; + priv->write_reg_noack = realtek_smi_write_reg_noack; - priv->ds->ops = var->ds_ops_smi; - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err_probe(dev, ret, "unable to register switch\n"); + rtl83xx_remove(priv); return ret; } + return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, "REALTEK_DSA"); -static int realtek_smi_remove(struct platform_device *pdev) +/** + * realtek_smi_remove() - Remove the driver of a SMI-connected switch + * @pdev: platform_device to be removed. + * + * This function should be used as the .remove in a platform_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_remove(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) - return 0; - - dsa_unregister_switch(priv->ds); - if (priv->slave_mii_bus) - of_node_put(priv->slave_mii_bus->dev.of_node); + return; - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_unregister_switch(priv); - return 0; + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, "REALTEK_DSA"); -static void realtek_smi_shutdown(struct platform_device *pdev) +/** + * realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch + * @pdev: platform_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_smi_shutdown(struct platform_device *pdev) { struct realtek_priv *priv = platform_get_drvdata(pdev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - platform_set_drvdata(pdev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_smi_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { - .compatible = "realtek,rtl8366rb", - .data = &rtl8366rb_variant, - }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { - .compatible = "realtek,rtl8365mb", - .data = &rtl8365mb_variant, - }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_smi_of_match); - -static struct platform_driver realtek_smi_driver = { - .driver = { - .name = "realtek-smi", - .of_match_table = realtek_smi_of_match, - }, - .probe = realtek_smi_probe, - .remove = realtek_smi_remove, - .shutdown = realtek_smi_shutdown, -}; -module_platform_driver(realtek_smi_driver); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via SMI interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/realtek-smi.h b/drivers/net/dsa/realtek/realtek-smi.h new file mode 100644 index 000000000000..ea49a2edd3c8 --- /dev/null +++ b/drivers/net/dsa/realtek/realtek-smi.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _REALTEK_SMI_H +#define _REALTEK_SMI_H + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return platform_driver_register(drv); +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ + platform_driver_unregister(drv); +} + +int realtek_smi_probe(struct platform_device *pdev); +void realtek_smi_remove(struct platform_device *pdev); +void realtek_smi_shutdown(struct platform_device *pdev); + +#else /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +static inline int realtek_smi_driver_register(struct platform_driver *drv) +{ + return 0; +} + +static inline void realtek_smi_driver_unregister(struct platform_driver *drv) +{ +} + +static inline int realtek_smi_probe(struct platform_device *pdev) +{ + return -ENOENT; +} + +static inline void realtek_smi_remove(struct platform_device *pdev) +{ +} + +static inline void realtek_smi_shutdown(struct platform_device *pdev) +{ +} + +#endif /* IS_ENABLED(CONFIG_NET_DSA_REALTEK_SMI) */ + +#endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h index 4fa7c6ba874a..c03485a80d93 100644 --- a/drivers/net/dsa/realtek/realtek.h +++ b/drivers/net/dsa/realtek/realtek.h @@ -12,14 +12,13 @@ #include <linux/platform_device.h> #include <linux/gpio/consumer.h> #include <net/dsa.h> +#include <linux/reset.h> #define REALTEK_HW_STOP_DELAY 25 /* msecs */ #define REALTEK_HW_START_DELAY 100 /* msecs */ +struct phylink_mac_ops; struct realtek_ops; -struct dentry; -struct inode; -struct file; struct rtl8366_mib_counter { unsigned int base; @@ -48,21 +47,21 @@ struct rtl8366_vlan_4k { struct realtek_priv { struct device *dev; + struct reset_control *reset_ctl; struct gpio_desc *reset; struct gpio_desc *mdc; struct gpio_desc *mdio; struct regmap *map; struct regmap *map_nolock; struct mutex map_lock; - struct mii_bus *slave_mii_bus; + struct mii_bus *user_mii_bus; struct mii_bus *bus; int mdio_addr; - unsigned int clk_delay; - u8 cmd_read; - u8 cmd_write; + const struct realtek_variant *variant; + spinlock_t lock; /* Locks around command writes */ - struct dsa_switch *ds; + struct dsa_switch ds; struct irq_domain *irqdomain; bool leds_disabled; @@ -73,7 +72,6 @@ struct realtek_priv { struct rtl8366_mib_counter *mib_counters; const struct realtek_ops *ops; - int (*setup_interface)(struct dsa_switch *ds); int (*write_reg_noack)(void *ctx, u32 addr, u32 data); int vlan_enabled; @@ -91,7 +89,6 @@ struct realtek_ops { int (*detect)(struct realtek_priv *priv); int (*reset_chip)(struct realtek_priv *priv); int (*setup)(struct realtek_priv *priv); - void (*cleanup)(struct realtek_priv *priv); int (*get_mib_counter)(struct realtek_priv *priv, int port, struct rtl8366_mib_counter *mib, @@ -116,9 +113,9 @@ struct realtek_ops { }; struct realtek_variant { - const struct dsa_switch_ops *ds_ops_smi; - const struct dsa_switch_ops *ds_ops_mdio; + const struct dsa_switch_ops *ds_ops; const struct realtek_ops *ops; + const struct phylink_mac_ops *phylink_mac_ops; unsigned int clk_delay; u8 cmd_read; u8 cmd_write; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index 41ea3b5a42b1..c575e164368c 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -101,6 +101,9 @@ #include <linux/if_vlan.h> #include "realtek.h" +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Family-specific data and limits */ #define RTL8365MB_PHYADDRMAX 7 @@ -206,10 +209,10 @@ #define RTL8365MB_EXT_PORT_MODE_100FX 13 /* External interface mode configuration registers 0~1 */ -#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT1 */ +#define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT0,EXT1 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 /* EXT2 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extint) \ - ((_extint) == 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ + ((_extint) <= 1 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 : \ (_extint) == 2 ? RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 : \ 0x0) #define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(_extint) \ @@ -689,7 +692,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -722,7 +725,7 @@ static int rtl8365mb_phy_ocp_read(struct realtek_priv *priv, int phy, *data = val & 0xFFFF; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -733,7 +736,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, u32 val; int ret; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = rtl8365mb_phy_poll_busy(priv); if (ret) @@ -764,7 +767,7 @@ static int rtl8365mb_phy_ocp_write(struct realtek_priv *priv, int phy, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return 0; } @@ -825,17 +828,6 @@ static int rtl8365mb_phy_write(struct realtek_priv *priv, int phy, int regnum, return 0; } -static int rtl8365mb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8365mb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8365mb_phy_write(ds->priv, phy, regnum, val); -} - static const struct rtl8365mb_extint * rtl8365mb_get_port_extint(struct realtek_priv *priv, int port) { @@ -878,6 +870,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, { const struct rtl8365mb_extint *extint = rtl8365mb_get_port_extint(priv, port); + struct dsa_switch *ds = &priv->ds; struct device_node *dn; struct dsa_port *dp; int tx_delay = 0; @@ -888,7 +881,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, if (!extint) return -ENODEV; - dp = dsa_to_port(priv->ds, port); + dp = dsa_to_port(ds, port); dn = dp->dn; /* Set the RGMII TX/RX delay @@ -1055,11 +1048,13 @@ static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port, phy_interface_set_rgmii(config->supported_interfaces); } -static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port, +static void rtl8365mb_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { - struct realtek_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct realtek_priv *priv = dp->ds->priv; + u8 port = dp->index; int ret; if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) { @@ -1083,13 +1078,15 @@ static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port, */ } -static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void rtl8365mb_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct realtek_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct realtek_priv *priv = dp->ds->priv; struct rtl8365mb_port *p; struct rtl8365mb *mb; + u8 port = dp->index; int ret; mb = priv->chip_data; @@ -1108,16 +1105,18 @@ static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port, } } -static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void rtl8365mb_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, + int speed, int duplex, bool tx_pause, bool rx_pause) { - struct realtek_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct realtek_priv *priv = dp->ds->priv; struct rtl8365mb_port *p; struct rtl8365mb *mb; + u8 port = dp->index; int ret; mb = priv->chip_data; @@ -1144,7 +1143,7 @@ static int rtl8365mb_port_change_mtu(struct dsa_switch *ds, int port, int frame_size; /* When a new MTU is set, DSA always sets the CPU port's MTU to the - * largest MTU of the slave ports. Because the switch only has a global + * largest MTU of the user ports. Because the switch only has a global * RX length register, only allowing CPU port here is enough. */ if (!dsa_is_cpu_port(ds, port)) @@ -1303,8 +1302,7 @@ static void rtl8365mb_get_strings(struct dsa_switch *ds, int port, u32 stringset for (i = 0; i < RTL8365MB_MIB_END; i++) { struct rtl8365mb_mib_counter *mib = &rtl8365mb_mib_counters[i]; - - strncpy(data + i * ETH_GSTRING_LEN, mib->name, ETH_GSTRING_LEN); + ethtool_puts(&data, mib->name); } } @@ -1542,6 +1540,7 @@ static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port, static void rtl8365mb_stats_setup(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; /* Per-chip global mutex to protect MIB counter access, since doing @@ -1552,7 +1551,7 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Per-port spinlock to protect the stats64 data */ @@ -1568,12 +1567,13 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv) static void rtl8365mb_stats_teardown(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + struct dsa_switch *ds = &priv->ds; int i; for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; cancel_delayed_work_sync(&p->mib_work); @@ -1719,8 +1719,8 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv) goto out_put_node; } - priv->irqdomain = irq_domain_add_linear(intc, priv->num_ports, - &rtl8365mb_irqdomain_ops, priv); + priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), priv->num_ports, + &rtl8365mb_irqdomain_ops, priv); if (!priv->irqdomain) { dev_err(priv->dev, "failed to add irq domain\n"); ret = -ENOMEM; @@ -1740,7 +1740,7 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv) } /* Configure chip interrupt signal polarity */ - irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + irq_trig = irq_get_trigger_type(irq); switch (irq_trig) { case IRQF_TRIGGER_RISING: case IRQF_TRIGGER_HIGH: @@ -1972,7 +1972,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) dev_info(priv->dev, "no interrupt support\n"); /* Configure CPU tagging */ - dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) { + dsa_switch_for_each_cpu_port(cpu_dp, ds) { cpu->mask |= BIT(cpu_dp->index); if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS) @@ -1987,7 +1987,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) for (i = 0; i < priv->num_ports; i++) { struct rtl8365mb_port *p = &mb->ports[i]; - if (dsa_is_unused_port(priv->ds, i)) + if (dsa_is_unused_port(ds, i)) continue; /* Forward only to the CPU */ @@ -2004,7 +2004,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds) * ports will still forward frames to the CPU despite being * administratively down by default. */ - rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED); + rtl8365mb_port_stp_state_set(ds, i, BR_STATE_DISABLED); /* Set up per-port private data */ p->priv = priv; @@ -2015,12 +2015,10 @@ static int rtl8365mb_setup(struct dsa_switch *ds) if (ret) goto out_teardown_irq; - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - goto out_teardown_irq; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + goto out_teardown_irq; } /* Start statistics counter polling */ @@ -2114,38 +2112,18 @@ static int rtl8365mb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = { - .get_tag_protocol = rtl8365mb_get_tag_protocol, - .change_tag_protocol = rtl8365mb_change_tag_protocol, - .setup = rtl8365mb_setup, - .teardown = rtl8365mb_teardown, - .phylink_get_caps = rtl8365mb_phylink_get_caps, - .phylink_mac_config = rtl8365mb_phylink_mac_config, - .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down, - .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up, - .port_stp_state_set = rtl8365mb_port_stp_state_set, - .get_strings = rtl8365mb_get_strings, - .get_ethtool_stats = rtl8365mb_get_ethtool_stats, - .get_sset_count = rtl8365mb_get_sset_count, - .get_eth_phy_stats = rtl8365mb_get_phy_stats, - .get_eth_mac_stats = rtl8365mb_get_mac_stats, - .get_eth_ctrl_stats = rtl8365mb_get_ctrl_stats, - .get_stats64 = rtl8365mb_get_stats64, - .port_change_mtu = rtl8365mb_port_change_mtu, - .port_max_mtu = rtl8365mb_port_max_mtu, +static const struct phylink_mac_ops rtl8365mb_phylink_mac_ops = { + .mac_config = rtl8365mb_phylink_mac_config, + .mac_link_down = rtl8365mb_phylink_mac_link_down, + .mac_link_up = rtl8365mb_phylink_mac_link_up, }; -static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { +static const struct dsa_switch_ops rtl8365mb_switch_ops = { .get_tag_protocol = rtl8365mb_get_tag_protocol, .change_tag_protocol = rtl8365mb_change_tag_protocol, .setup = rtl8365mb_setup, .teardown = rtl8365mb_teardown, .phylink_get_caps = rtl8365mb_phylink_get_caps, - .phylink_mac_config = rtl8365mb_phylink_mac_config, - .phylink_mac_link_down = rtl8365mb_phylink_mac_link_down, - .phylink_mac_link_up = rtl8365mb_phylink_mac_link_up, - .phy_read = rtl8365mb_dsa_phy_read, - .phy_write = rtl8365mb_dsa_phy_write, .port_stp_state_set = rtl8365mb_port_stp_state_set, .get_strings = rtl8365mb_get_strings, .get_ethtool_stats = rtl8365mb_get_ethtool_stats, @@ -2156,6 +2134,8 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = { .get_stats64 = rtl8365mb_get_stats64, .port_change_mtu = rtl8365mb_port_change_mtu, .port_max_mtu = rtl8365mb_port_max_mtu, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static const struct realtek_ops rtl8365mb_ops = { @@ -2165,16 +2145,67 @@ static const struct realtek_ops rtl8365mb_ops = { }; const struct realtek_variant rtl8365mb_variant = { - .ds_ops_smi = &rtl8365mb_switch_ops_smi, - .ds_ops_mdio = &rtl8365mb_switch_ops_mdio, + .ds_ops = &rtl8365mb_switch_ops, .ops = &rtl8365mb_ops, + .phylink_mac_ops = &rtl8365mb_phylink_mac_ops, .clk_delay = 10, .cmd_read = 0xb9, .cmd_write = 0xb8, .chip_data_sz = sizeof(struct rtl8365mb), }; -EXPORT_SYMBOL_GPL(rtl8365mb_variant); + +static const struct of_device_id rtl8365mb_of_match[] = { + { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8365mb_of_match); + +static struct platform_driver rtl8365mb_smi_driver = { + .driver = { + .name = "rtl8365mb-smi", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_smi_probe, + .remove = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8365mb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8365mb-mdio", + .of_match_table = rtl8365mb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8365mb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8365mb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8365mb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8365mb_init); + +static void __exit rtl8365mb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8365mb_smi_driver); + realtek_mdio_driver_unregister(&rtl8365mb_mdio_driver); +} +module_exit(rtl8365mb_exit); MODULE_AUTHOR("Alvin Å ipraga <alsi@bang-olufsen.dk>"); MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c index dc5f75be3017..047feeed96a2 100644 --- a/drivers/net/dsa/realtek/rtl8366-core.c +++ b/drivers/net/dsa/realtek/rtl8366-core.c @@ -34,7 +34,7 @@ int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); +EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, "REALTEK_DSA"); /** * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration @@ -187,7 +187,7 @@ int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member, return ret; } -EXPORT_SYMBOL_GPL(rtl8366_set_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, "REALTEK_DSA"); int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, unsigned int vid) @@ -217,7 +217,7 @@ int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_set_pvid); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, "REALTEK_DSA"); int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) { @@ -243,7 +243,7 @@ int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) priv->vlan4k_enabled = enable; return 0; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, "REALTEK_DSA"); int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) { @@ -265,7 +265,7 @@ int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) return ret; } -EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, "REALTEK_DSA"); int rtl8366_reset_vlan(struct realtek_priv *priv) { @@ -290,7 +290,7 @@ int rtl8366_reset_vlan(struct realtek_priv *priv) return 0; } -EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); +EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, "REALTEK_DSA"); int rtl8366_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, @@ -345,7 +345,7 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_add); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, "REALTEK_DSA"); int rtl8366_vlan_del(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) @@ -389,25 +389,21 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_GPL(rtl8366_vlan_del); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, "REALTEK_DSA"); void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) { struct realtek_priv *priv = ds->priv; - struct rtl8366_mib_counter *mib; int i; if (port >= priv->num_ports) return; - for (i = 0; i < priv->num_mib_counters; i++) { - mib = &priv->mib_counters[i]; - strncpy(data + i * ETH_GSTRING_LEN, - mib->name, ETH_GSTRING_LEN); - } + for (i = 0; i < priv->num_mib_counters; i++) + ethtool_puts(&data, priv->mib_counters[i].name); } -EXPORT_SYMBOL_GPL(rtl8366_get_strings); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, "REALTEK_DSA"); int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) { @@ -421,7 +417,7 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) return priv->num_mib_counters; } -EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, "REALTEK_DSA"); void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) { @@ -445,4 +441,4 @@ void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) data[i] = mibvalue; } } -EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366rb-leds.c b/drivers/net/dsa/realtek/rtl8366rb-leds.c new file mode 100644 index 000000000000..99c890681ae6 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb-leds.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <net/dsa.h> +#include "rtl83xx.h" +#include "rtl8366rb.h" + +static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) +{ + switch (led_group) { + case 0: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 1: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 2: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 3: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + default: + return 0; + } +} + +static int rb8366rb_get_port_led(struct rtl8366rb_led *led) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + u32 val; + + ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), + &val); + if (ret) { + dev_err(priv->dev, "error reading LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); +} + +static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_X_X_CTRL_REG(led_group), + rtl8366rb_led_group_port_mask(led_group, + port_num), + enable ? 0xffff : 0); + if (ret) { + dev_err(priv->dev, "error updating LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + /* Change the LED group to manual controlled LEDs if required */ + ret = rb8366rb_set_ledgroup_mode(priv, led_group, + RTL8366RB_LEDGROUP_FORCE); + + if (ret) { + dev_err(priv->dev, "error updating LED GROUP group %d\n", + led_group); + return ret; + } + + return 0; +} + +static int +rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, + cdev); + + return rb8366rb_set_port_led(led, brightness == LED_ON); +} + +static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, + struct fwnode_handle *led_fwnode) +{ + struct rtl8366rb *rb = priv->chip_data; + struct led_init_data init_data = { }; + enum led_default_state state; + struct rtl8366rb_led *led; + u32 led_group; + int ret; + + ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); + if (ret) + return ret; + + if (led_group >= RTL8366RB_NUM_LEDGROUPS) { + dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", + led_group, dp->index); + return -EINVAL; + } + + led = &rb->leds[dp->index][led_group]; + led->port_num = dp->index; + led->led_group = led_group; + led->priv = priv; + + state = led_init_default_state_get(led_fwnode); + switch (state) { + case LEDS_DEFSTATE_ON: + led->cdev.brightness = 1; + rb8366rb_set_port_led(led, 1); + break; + case LEDS_DEFSTATE_KEEP: + led->cdev.brightness = + rb8366rb_get_port_led(led); + break; + case LEDS_DEFSTATE_OFF: + default: + led->cdev.brightness = 0; + rb8366rb_set_port_led(led, 0); + } + + led->cdev.max_brightness = 1; + led->cdev.brightness_set_blocking = + rtl8366rb_cled_brightness_set_blocking; + init_data.fwnode = led_fwnode; + init_data.devname_mandatory = true; + + init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", + dp->ds->index, dp->index, led_group); + if (!init_data.devicename) + return -ENOMEM; + + ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); + if (ret) { + dev_warn(priv->dev, "Failed to init LED %d for port %d", + led_group, dp->index); + return ret; + } + + return 0; +} + +int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + struct device_node *leds_np; + struct dsa_port *dp; + int ret = 0; + + dsa_switch_for_each_port(dp, ds) { + if (!dp->dn) + continue; + + leds_np = of_get_child_by_name(dp->dn, "leds"); + if (!leds_np) { + dev_dbg(priv->dev, "No leds defined for port %d", + dp->index); + continue; + } + + for_each_child_of_node_scoped(leds_np, led_np) { + ret = rtl8366rb_setup_led(priv, dp, + of_fwnode_handle(led_np)); + if (ret) + break; + } + + of_node_put(leds_np); + if (ret) + return ret; + } + return 0; +} diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index 7868ef237f6c..d96ae72b0a5c 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -15,18 +15,19 @@ #include <linux/bitops.h> #include <linux/etherdevice.h> #include <linux/if_bridge.h> +#include <linux/if_vlan.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/irqchip/chained_irq.h> #include <linux/of_irq.h> #include <linux/regmap.h> +#include <linux/string_choices.h> #include "realtek.h" - -#define RTL8366RB_PORT_NUM_CPU 5 -#define RTL8366RB_NUM_PORTS 6 -#define RTL8366RB_PHY_NO_MAX 4 -#define RTL8366RB_PHY_ADDR_MAX 31 +#include "realtek-smi.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" +#include "rtl8366rb.h" /* Switch Global Configuration register */ #define RTL8366RB_SGCR 0x0000 @@ -95,12 +96,6 @@ #define RTL8366RB_PAACR_RX_PAUSE BIT(6) #define RTL8366RB_PAACR_AN BIT(7) -#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ - RTL8366RB_PAACR_FULL_DUPLEX | \ - RTL8366RB_PAACR_LINK_UP | \ - RTL8366RB_PAACR_TX_PAUSE | \ - RTL8366RB_PAACR_RX_PAUSE) - /* bits 0..7 = port 0, bits 8..15 = port 1 */ #define RTL8366RB_PSTAT0 0x0014 /* bits 0..7 = port 2, bits 8..15 = port 3 */ @@ -123,10 +118,11 @@ RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK) /* CPU port control reg */ -#define RTL8368RB_CPU_CTRL_REG 0x0061 -#define RTL8368RB_CPU_PORTS_MSK 0x00FF +#define RTL8366RB_CPU_CTRL_REG 0x0061 +#define RTL8366RB_CPU_PORTS_MSK 0x00FF /* Disables inserting custom tag length/type 0x8899 */ -#define RTL8368RB_CPU_NO_TAG BIT(15) +#define RTL8366RB_CPU_NO_TAG BIT(15) +#define RTL8366RB_CPU_TAG_SIZE 4 #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ @@ -176,38 +172,6 @@ */ #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f -/* LED control registers */ -#define RTL8366RB_LED_BLINKRATE_REG 0x0430 -#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 -#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 -#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 -#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 -#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 -#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 -#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 - -#define RTL8366RB_LED_CTRL_REG 0x0431 -#define RTL8366RB_LED_OFF 0x0 -#define RTL8366RB_LED_DUP_COL 0x1 -#define RTL8366RB_LED_LINK_ACT 0x2 -#define RTL8366RB_LED_SPD1000 0x3 -#define RTL8366RB_LED_SPD100 0x4 -#define RTL8366RB_LED_SPD10 0x5 -#define RTL8366RB_LED_SPD1000_ACT 0x6 -#define RTL8366RB_LED_SPD100_ACT 0x7 -#define RTL8366RB_LED_SPD10_ACT 0x8 -#define RTL8366RB_LED_SPD100_10_ACT 0x9 -#define RTL8366RB_LED_FIBER 0xa -#define RTL8366RB_LED_AN_FAULT 0xb -#define RTL8366RB_LED_LINK_RX 0xc -#define RTL8366RB_LED_LINK_TX 0xd -#define RTL8366RB_LED_MASTER 0xe -#define RTL8366RB_LED_FORCE 0xf -#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 -#define RTL8366RB_LED_1_OFFSET 6 -#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 -#define RTL8366RB_LED_3_OFFSET 6 - #define RTL8366RB_MIB_COUNT 33 #define RTL8366RB_GLOBAL_MIB_COUNT 1 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 @@ -243,7 +207,6 @@ #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 #define RTL8366RB_NUM_VLANS 16 -#define RTL8366RB_NUM_LEDGROUPS 4 #define RTL8366RB_NUM_VIDS 4096 #define RTL8366RB_PRIORITYMAX 7 #define RTL8366RB_NUM_FIDS 8 @@ -350,16 +313,6 @@ #define RTL8366RB_GREEN_FEATURE_TX BIT(0) #define RTL8366RB_GREEN_FEATURE_RX BIT(2) -/** - * struct rtl8366rb - RTL8366RB-specific data - * @max_mtu: per-port max MTU setting - * @pvid_enabled: if PVID is set for respective port - */ -struct rtl8366rb { - unsigned int max_mtu[RTL8366RB_NUM_PORTS]; - bool pvid_enabled[RTL8366RB_NUM_PORTS]; -}; - static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { { 0, 0, 4, "IfInOctets" }, { 0, 4, 4, "EtherStatsOctets" }, @@ -569,7 +522,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv) } /* Fetch IRQ edge information from the descriptor */ - irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + irq_trig = irq_get_trigger_type(irq); switch (irq_trig) { case IRQF_TRIGGER_RISING: case IRQF_TRIGGER_HIGH: @@ -597,10 +550,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv) dev_err(priv->dev, "unable to request irq: %d\n", ret); goto out_put_node; } - priv->irqdomain = irq_domain_add_linear(intc, - RTL8366RB_NUM_INTERRUPT, - &rtl8366rb_irqdomain_ops, - priv); + priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), RTL8366RB_NUM_INTERRUPT, + &rtl8366rb_irqdomain_ops, priv); if (!priv->irqdomain) { dev_err(priv->dev, "failed to create IRQ domain\n"); ret = -EINVAL; @@ -800,6 +751,47 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, return 0; } +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode) +{ + int ret; + u32 val; + + val = mode << RTL8366RB_LED_CTRL_OFFSET(led_group); + + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_CTRL_REG, + RTL8366RB_LED_CTRL_MASK(led_group), + val); + if (ret) + return ret; + + return 0; +} + +/* This code is used also with LEDs disabled */ +static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) +{ + int ret = 0; + int i; + + regmap_update_bits(priv->map, + RTL8366RB_INTERRUPT_CONTROL_REG, + RTL8366RB_P4_RGMII_LED, + 0); + + for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) { + ret = rb8366rb_set_ledgroup_mode(priv, i, + RTL8366RB_LEDGROUP_OFF); + if (ret) + return ret; + } + + return ret; +} + static int rtl8366rb_setup(struct dsa_switch *ds) { struct realtek_priv *priv = ds->priv; @@ -808,7 +800,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds) u32 chip_ver = 0; u32 chip_id = 0; int jam_size; - u32 val; int ret; int i; @@ -918,10 +909,10 @@ static int rtl8366rb_setup(struct dsa_switch *ds) /* Enable CPU port with custom DSA tag 8899. * - * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers + * If you set RTL8366RB_CPU_NO_TAG (bit 15) in this register * the custom tag is turned off. */ - ret = regmap_update_bits(priv->map, RTL8368RB_CPU_CTRL_REG, + ret = regmap_update_bits(priv->map, RTL8366RB_CPU_CTRL_REG, 0xFFFF, BIT(priv->cpu_port)); if (ret) @@ -934,15 +925,19 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) return ret; - /* Set maximum packet length to 1536 bytes */ + /* Set default maximum packet length to 1536 bytes */ ret = regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_MAX_LENGTH_MASK, RTL8366RB_SGCR_MAX_LENGTH_1536); if (ret) return ret; - for (i = 0; i < RTL8366RB_NUM_PORTS; i++) - /* layer 2 size, see rtl8366rb_change_mtu() */ - rb->max_mtu[i] = 1532; + for (i = 0; i < RTL8366RB_NUM_PORTS; i++) { + if (i == priv->cpu_port) + /* CPU port need to also accept the tag */ + rb->max_mtu[i] = ETH_DATA_LEN + RTL8366RB_CPU_TAG_SIZE; + else + rb->max_mtu[i] = ETH_DATA_LEN; + } /* Disable learning for all ports */ ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL, @@ -984,7 +979,9 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) return ret; - /* Set blinking, TODO: make this configurable */ + /* Set blinking, used by all LED groups using HW triggers. + * TODO: make this configurable + */ ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG, RTL8366RB_LED_BLINKRATE_MASK, RTL8366RB_LED_BLINKRATE_56MS); @@ -992,32 +989,17 @@ static int rtl8366rb_setup(struct dsa_switch *ds) return ret; /* Set up LED activity: - * Each port has 4 LEDs, we configure all ports to the same - * behaviour (no individual config) but we can set up each - * LED separately. + * Each port has 4 LEDs on fixed groups. Each group shares the same + * hardware trigger across all ports. LEDs can only be indiviually + * controlled setting the LED group to fixed mode and using the driver + * to toggle them LEDs on/off. */ if (priv->leds_disabled) { - /* Turn everything off */ - regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, - RTL8366RB_INTERRUPT_CONTROL_REG, - RTL8366RB_P4_RGMII_LED, - 0); - val = RTL8366RB_LED_OFF; + ret = rtl8366rb_setup_all_leds_off(priv); + if (ret) + return ret; } else { - /* TODO: make this configurable per LED */ - val = RTL8366RB_LED_FORCE; - } - for (i = 0; i < 4; i++) { - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_CTRL_REG, - 0xf << (i * 4), - val << (i * 4)); + ret = rtl8366rb_setup_leds(priv); if (ret) return ret; } @@ -1030,12 +1012,10 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) dev_info(priv->dev, "no interrupt support\n"); - if (priv->setup_interface) { - ret = priv->setup_interface(ds); - if (ret) { - dev_err(priv->dev, "could not set up MDIO bus\n"); - return -ENODEV; - } + ret = rtl83xx_setup_user_mdio(ds); + if (ret) { + dev_err(priv->dev, "could not set up MDIO bus\n"); + return -ENODEV; } return 0; @@ -1076,34 +1056,74 @@ static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port, } static void -rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface, struct phy_device *phydev, +rtl8366rb_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ +} + +static void +rtl8366rb_mac_link_up(struct phylink_config *config, struct phy_device *phydev, + unsigned int mode, phy_interface_t interface, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct realtek_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct realtek_priv *priv = dp->ds->priv; + int port = dp->index; + unsigned int val; int ret; + /* Allow forcing the mode on the fixed CPU port, no autonegotiation. + * We assume autonegotiation works on the PHY-facing ports. + */ if (port != priv->cpu_port) return; dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port); - /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG, BIT(port), BIT(port)); if (ret) { - dev_err(priv->dev, "failed to force 1Gbit on CPU port\n"); + dev_err(priv->dev, "failed to force CPU port\n"); return; } + /* Conjure port config */ + switch (speed) { + case SPEED_10: + val = RTL8366RB_PAACR_SPEED_10M; + break; + case SPEED_100: + val = RTL8366RB_PAACR_SPEED_100M; + break; + case SPEED_1000: + val = RTL8366RB_PAACR_SPEED_1000M; + break; + default: + val = RTL8366RB_PAACR_SPEED_1000M; + break; + } + + if (duplex == DUPLEX_FULL) + val |= RTL8366RB_PAACR_FULL_DUPLEX; + + if (tx_pause) + val |= RTL8366RB_PAACR_TX_PAUSE; + + if (rx_pause) + val |= RTL8366RB_PAACR_RX_PAUSE; + + val |= RTL8366RB_PAACR_LINK_UP; + ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2, 0xFF00U, - RTL8366RB_PAACR_CPU_PORT << 8); + val << 8); if (ret) { dev_err(priv->dev, "failed to set PAACR on CPU port\n"); return; } + dev_dbg(priv->dev, "set PAACR to %04x\n", val); + /* Enable the CPU port */ ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 0); @@ -1114,10 +1134,12 @@ rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, } static void -rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, +rtl8366rb_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct realtek_priv *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct realtek_priv *priv = dp->ds->priv; + int port = dp->index; int ret; if (port != priv->cpu_port) @@ -1134,52 +1156,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, } } -static void rb8366rb_set_port_led(struct realtek_priv *priv, - int port, bool enable) -{ - u16 val = enable ? 0x3f : 0; - int ret; - - if (priv->leds_disabled) - return; - - switch (port) { - case 0: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F, val); - break; - case 1: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F << RTL8366RB_LED_1_OFFSET, - val << RTL8366RB_LED_1_OFFSET); - break; - case 2: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F, val); - break; - case 3: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F << RTL8366RB_LED_3_OFFSET, - val << RTL8366RB_LED_3_OFFSET); - break; - case 4: - ret = regmap_update_bits(priv->map, - RTL8366RB_INTERRUPT_CONTROL_REG, - RTL8366RB_P4_RGMII_LED, - enable ? RTL8366RB_P4_RGMII_LED : 0); - break; - default: - dev_err(priv->dev, "no LED for port %d\n", port); - return; - } - if (ret) - dev_err(priv->dev, "error updating LED on port %d\n", port); -} - static int rtl8366rb_port_enable(struct dsa_switch *ds, int port, struct phy_device *phy) @@ -1193,7 +1169,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port, if (ret) return ret; - rb8366rb_set_port_led(priv, port, true); return 0; } @@ -1208,8 +1183,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port) BIT(port)); if (ret) return; - - rb8366rb_set_port_led(priv, port, false); } static int @@ -1302,7 +1275,7 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, rb = priv->chip_data; dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port, - vlan_filtering ? "enable" : "disable"); + str_enable_disable(vlan_filtering)); /* If the port is not in the member set, the frame will be dropped */ ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, @@ -1415,24 +1388,29 @@ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) /* Roof out the MTU for the entire switch to the greatest * common denominator: the biggest set for any one port will * be the biggest MTU for the switch. - * - * The first setting, 1522 bytes, is max IP packet 1500 bytes, - * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes. - * This function should consider the parameter an SDU, so the - * MTU passed for this setting is 1518 bytes. The same logic - * of subtracting the DSA tag of 4 bytes apply to the other - * settings. */ - max_mtu = 1518; + max_mtu = ETH_DATA_LEN; for (i = 0; i < RTL8366RB_NUM_PORTS; i++) { if (rb->max_mtu[i] > max_mtu) max_mtu = rb->max_mtu[i]; } - if (max_mtu <= 1518) + + /* Translate to layer 2 size. + * Add ethernet and (possible) VLAN headers, and checksum to the size. + * For ETH_DATA_LEN (1500 bytes) this will add up to 1522 bytes. + */ + max_mtu += VLAN_ETH_HLEN; + max_mtu += ETH_FCS_LEN; + + if (max_mtu <= 1522) len = RTL8366RB_SGCR_MAX_LENGTH_1522; - else if (max_mtu > 1518 && max_mtu <= 1532) + else if (max_mtu > 1522 && max_mtu <= 1536) + /* This will be the most common default if using VLAN and + * CPU tagging on a port as both VLAN and CPU tag will + * result in 1518 + 4 + 4 = 1526 bytes. + */ len = RTL8366RB_SGCR_MAX_LENGTH_1536; - else if (max_mtu > 1532 && max_mtu <= 1548) + else if (max_mtu > 1536 && max_mtu <= 1552) len = RTL8366RB_SGCR_MAX_LENGTH_1552; else len = RTL8366RB_SGCR_MAX_LENGTH_16000; @@ -1444,10 +1422,12 @@ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port) { - /* The max MTU is 16000 bytes, so we subtract the CPU tag - * and the max presented to the system is 15996 bytes. + /* The max MTU is 16000 bytes, so we subtract the ethernet + * headers with VLAN and checksum and arrive at + * 16000 - 18 - 4 = 15978. This does not include the CPU tag + * since that is added to the requested MTU by the DSA framework. */ - return 15996; + return 16000 - VLAN_ETH_HLEN - ETH_FCS_LEN; } static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid, @@ -1611,6 +1591,7 @@ static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val) static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index) { + struct dsa_switch *ds = &priv->ds; struct rtl8366rb *rb; bool pvid_enabled; int ret; @@ -1635,7 +1616,7 @@ static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index * not drop any untagged or C-tagged frames. Make sure to update the * filtering setting. */ - if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port))) + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled); return ret; @@ -1656,7 +1637,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, enable ? RTL8366RB_SGCR_EN_VLAN : 0); @@ -1664,7 +1645,7 @@ static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN 4k\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN_4KTB, enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); @@ -1679,7 +1660,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_READ); @@ -1707,7 +1688,7 @@ static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) phy, regnum, reg, val); out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } @@ -1721,7 +1702,7 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, if (phy > RTL8366RB_PHY_NO_MAX) return -EINVAL; - mutex_lock(&priv->map_lock); + rtl83xx_lock(priv); ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, RTL8366RB_PHY_CTRL_WRITE); @@ -1738,22 +1719,11 @@ static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, goto out; out: - mutex_unlock(&priv->map_lock); + rtl83xx_unlock(priv); return ret; } -static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) -{ - return rtl8366rb_phy_read(ds->priv, phy, regnum); -} - -static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, - u16 val) -{ - return rtl8366rb_phy_write(ds->priv, phy, regnum, val); -} - static int rtl8366rb_reset_chip(struct realtek_priv *priv) { int timeout = 10; @@ -1819,38 +1789,16 @@ static int rtl8366rb_detect(struct realtek_priv *priv) return 0; } -static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { - .get_tag_protocol = rtl8366_get_tag_protocol, - .setup = rtl8366rb_setup, - .phylink_get_caps = rtl8366rb_phylink_get_caps, - .phylink_mac_link_up = rtl8366rb_mac_link_up, - .phylink_mac_link_down = rtl8366rb_mac_link_down, - .get_strings = rtl8366_get_strings, - .get_ethtool_stats = rtl8366_get_ethtool_stats, - .get_sset_count = rtl8366_get_sset_count, - .port_bridge_join = rtl8366rb_port_bridge_join, - .port_bridge_leave = rtl8366rb_port_bridge_leave, - .port_vlan_filtering = rtl8366rb_vlan_filtering, - .port_vlan_add = rtl8366_vlan_add, - .port_vlan_del = rtl8366_vlan_del, - .port_enable = rtl8366rb_port_enable, - .port_disable = rtl8366rb_port_disable, - .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, - .port_bridge_flags = rtl8366rb_port_bridge_flags, - .port_stp_state_set = rtl8366rb_port_stp_state_set, - .port_fast_age = rtl8366rb_port_fast_age, - .port_change_mtu = rtl8366rb_change_mtu, - .port_max_mtu = rtl8366rb_max_mtu, +static const struct phylink_mac_ops rtl8366rb_phylink_mac_ops = { + .mac_config = rtl8366rb_mac_config, + .mac_link_down = rtl8366rb_mac_link_down, + .mac_link_up = rtl8366rb_mac_link_up, }; -static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { +static const struct dsa_switch_ops rtl8366rb_switch_ops = { .get_tag_protocol = rtl8366_get_tag_protocol, .setup = rtl8366rb_setup, - .phy_read = rtl8366rb_dsa_phy_read, - .phy_write = rtl8366rb_dsa_phy_write, .phylink_get_caps = rtl8366rb_phylink_get_caps, - .phylink_mac_link_up = rtl8366rb_mac_link_up, - .phylink_mac_link_down = rtl8366rb_mac_link_down, .get_strings = rtl8366_get_strings, .get_ethtool_stats = rtl8366_get_ethtool_stats, .get_sset_count = rtl8366_get_sset_count, @@ -1867,6 +1815,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { .port_fast_age = rtl8366rb_port_fast_age, .port_change_mtu = rtl8366rb_change_mtu, .port_max_mtu = rtl8366rb_max_mtu, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static const struct realtek_ops rtl8366rb_ops = { @@ -1886,16 +1836,67 @@ static const struct realtek_ops rtl8366rb_ops = { }; const struct realtek_variant rtl8366rb_variant = { - .ds_ops_smi = &rtl8366rb_switch_ops_smi, - .ds_ops_mdio = &rtl8366rb_switch_ops_mdio, + .ds_ops = &rtl8366rb_switch_ops, .ops = &rtl8366rb_ops, + .phylink_mac_ops = &rtl8366rb_phylink_mac_ops, .clk_delay = 10, .cmd_read = 0xa9, .cmd_write = 0xa8, .chip_data_sz = sizeof(struct rtl8366rb), }; -EXPORT_SYMBOL_GPL(rtl8366rb_variant); + +static const struct of_device_id rtl8366rb_of_match[] = { + { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rtl8366rb_of_match); + +static struct platform_driver rtl8366rb_smi_driver = { + .driver = { + .name = "rtl8366rb-smi", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_smi_probe, + .remove = realtek_smi_remove, + .shutdown = realtek_smi_shutdown, +}; + +static struct mdio_driver rtl8366rb_mdio_driver = { + .mdiodrv.driver = { + .name = "rtl8366rb-mdio", + .of_match_table = rtl8366rb_of_match, + }, + .probe = realtek_mdio_probe, + .remove = realtek_mdio_remove, + .shutdown = realtek_mdio_shutdown, +}; + +static int rtl8366rb_init(void) +{ + int ret; + + ret = realtek_mdio_driver_register(&rtl8366rb_mdio_driver); + if (ret) + return ret; + + ret = realtek_smi_driver_register(&rtl8366rb_smi_driver); + if (ret) { + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); + return ret; + } + + return 0; +} +module_init(rtl8366rb_init); + +static void __exit rtl8366rb_exit(void) +{ + realtek_smi_driver_unregister(&rtl8366rb_smi_driver); + realtek_mdio_driver_unregister(&rtl8366rb_mdio_driver); +} +module_exit(rtl8366rb_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366rb.h b/drivers/net/dsa/realtek/rtl8366rb.h new file mode 100644 index 000000000000..685ff3275faa --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL8366RB_H +#define _RTL8366RB_H + +#include "realtek.h" + +#define RTL8366RB_PORT_NUM_CPU 5 +#define RTL8366RB_NUM_PORTS 6 +#define RTL8366RB_PHY_NO_MAX 4 +#define RTL8366RB_NUM_LEDGROUPS 4 +#define RTL8366RB_PHY_ADDR_MAX 31 + +/* LED control registers */ +/* The LED blink rate is global; it is used by all triggers in all groups. */ +#define RTL8366RB_LED_BLINKRATE_REG 0x0430 +#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 +#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 +#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 +#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 +#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 +#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 +#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 + +/* LED trigger event for each group */ +#define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ + (4 * (led_group)) +#define RTL8366RB_LED_CTRL_MASK(led_group) \ + (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) + +/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only + * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is + * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. + */ +#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 +#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 +#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ + ((led_group) <= 1 ? \ + RTL8366RB_LED_0_1_CTRL_REG : \ + RTL8366RB_LED_2_3_CTRL_REG) +#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) +#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) + +enum rtl8366_ledgroup_mode { + RTL8366RB_LEDGROUP_OFF = 0x0, + RTL8366RB_LEDGROUP_DUP_COL = 0x1, + RTL8366RB_LEDGROUP_LINK_ACT = 0x2, + RTL8366RB_LEDGROUP_SPD1000 = 0x3, + RTL8366RB_LEDGROUP_SPD100 = 0x4, + RTL8366RB_LEDGROUP_SPD10 = 0x5, + RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, + RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, + RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, + RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, + RTL8366RB_LEDGROUP_FIBER = 0xa, + RTL8366RB_LEDGROUP_AN_FAULT = 0xb, + RTL8366RB_LEDGROUP_LINK_RX = 0xc, + RTL8366RB_LEDGROUP_LINK_TX = 0xd, + RTL8366RB_LEDGROUP_MASTER = 0xe, + RTL8366RB_LEDGROUP_FORCE = 0xf, + + __RTL8366RB_LEDGROUP_MODE_MAX +}; + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + +struct rtl8366rb_led { + u8 port_num; + u8 led_group; + struct realtek_priv *priv; + struct led_classdev cdev; +}; + +int rtl8366rb_setup_leds(struct realtek_priv *priv); + +#else + +static inline int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + return 0; +} + +#endif /* IS_ENABLED(CONFIG_LEDS_CLASS) */ + +/** + * struct rtl8366rb - RTL8366RB-specific data + * @max_mtu: per-port max MTU setting + * @pvid_enabled: if PVID is set for respective port + * @leds: per-port and per-ledgroup led info + */ +struct rtl8366rb { + unsigned int max_mtu[RTL8366RB_NUM_PORTS]; + bool pvid_enabled[RTL8366RB_NUM_PORTS]; +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; +#endif +}; + +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode); + +#endif /* _RTL8366RB_H */ diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c new file mode 100644 index 000000000000..2b9bd4462714 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of_mdio.h> + +#include "realtek.h" +#include "rtl83xx.h" + +/** + * rtl83xx_lock() - Locks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function is passed to regmap to be used as the lock function. + * It is also used externally to block regmap before executing multiple + * operations that must happen in sequence (which will use + * realtek_priv.map_nolock instead). + * + * Context: Can sleep. Holds priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_lock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_lock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, "REALTEK_DSA"); + +/** + * rtl83xx_unlock() - Unlocks the mutex used by regmaps + * @ctx: realtek_priv pointer + * + * This function unlocks the lock acquired by rtl83xx_lock. + * + * Context: Releases priv->map_lock lock. + * Return: nothing + */ +void rtl83xx_unlock(void *ctx) +{ + struct realtek_priv *priv = ctx; + + mutex_unlock(&priv->map_lock); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, "REALTEK_DSA"); + +static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_read(priv, addr, regnum); +} + +static int rtl83xx_user_mdio_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct realtek_priv *priv = bus->priv; + + return priv->ops->phy_write(priv, addr, regnum, val); +} + +/** + * rtl83xx_setup_user_mdio() - register the user mii bus driver + * @ds: DSA switch associated with this user_mii_bus + * + * Registers the MDIO bus for built-in Ethernet PHYs, and associates it with + * the mandatory 'mdio' child OF node of the switch. + * + * Context: Can sleep. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_setup_user_mdio(struct dsa_switch *ds) +{ + struct realtek_priv *priv = ds->priv; + struct device_node *mdio_np; + struct mii_bus *bus; + int ret = 0; + + mdio_np = of_get_child_by_name(priv->dev->of_node, "mdio"); + if (!mdio_np) { + dev_err(priv->dev, "no MDIO bus node\n"); + return -ENODEV; + } + + bus = devm_mdiobus_alloc(priv->dev); + if (!bus) { + ret = -ENOMEM; + goto err_put_node; + } + + bus->priv = priv; + bus->name = "Realtek user MII"; + bus->read = rtl83xx_user_mdio_read; + bus->write = rtl83xx_user_mdio_write; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s:user_mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + ret = devm_of_mdiobus_register(priv->dev, bus, mdio_np); + if (ret) { + dev_err(priv->dev, "unable to register MDIO bus %s\n", + bus->id); + goto err_put_node; + } + + priv->user_mii_bus = bus; + +err_put_node: + of_node_put(mdio_np); + + return ret; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, "REALTEK_DSA"); + +/** + * rtl83xx_probe() - probe a Realtek switch + * @dev: the device being probed + * @interface_info: specific management interface info. + * + * This function initializes realtek_priv and reads data from the device tree + * node. The switch is hard resetted if a method is provided. + * + * Context: Can sleep. + * Return: Pointer to the realtek_priv or ERR_PTR() in case of failure. + * + * The realtek_priv pointer does not need to be freed as it is controlled by + * devres. + */ +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info) +{ + const struct realtek_variant *var; + struct realtek_priv *priv; + struct regmap_config rc = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_BIG, + .reg_read = interface_info->reg_read, + .reg_write = interface_info->reg_write, + .cache_type = REGCACHE_NONE, + .lock = rtl83xx_lock, + .unlock = rtl83xx_unlock, + }; + int ret; + + var = of_device_get_match_data(dev); + if (!var) + return ERR_PTR(-EINVAL); + + priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz), + GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + mutex_init(&priv->map_lock); + + rc.lock_arg = priv; + priv->map = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map)) { + ret = PTR_ERR(priv->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + rc.disable_locking = true; + priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); + if (IS_ERR(priv->map_nolock)) { + ret = PTR_ERR(priv->map_nolock); + dev_err(dev, "regmap init failed: %d\n", ret); + return ERR_PTR(ret); + } + + /* Link forward and backward */ + priv->dev = dev; + priv->variant = var; + priv->ops = var->ops; + priv->chip_data = (void *)priv + sizeof(*priv); + + spin_lock_init(&priv->lock); + + priv->leds_disabled = of_property_read_bool(dev->of_node, + "realtek,disable-leds"); + + /* TODO: if power is software controlled, set up any regulators here */ + priv->reset_ctl = devm_reset_control_get_optional(dev, NULL); + if (IS_ERR(priv->reset_ctl)) + return dev_err_cast_probe(dev, priv->reset_ctl, + "failed to get reset control\n"); + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return ERR_CAST(priv->reset); + } + + dev_set_drvdata(dev, priv); + + if (priv->reset_ctl || priv->reset) { + rtl83xx_reset_assert(priv); + dev_dbg(dev, "asserted RESET\n"); + msleep(REALTEK_HW_STOP_DELAY); + rtl83xx_reset_deassert(priv); + msleep(REALTEK_HW_START_DELAY); + dev_dbg(dev, "deasserted RESET\n"); + } + + return priv; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, "REALTEK_DSA"); + +/** + * rtl83xx_register_switch() - detects and register a switch + * @priv: realtek_priv pointer + * + * This function first checks the switch chip ID and register a DSA + * switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: 0 on success, negative value for failure. + */ +int rtl83xx_register_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + int ret; + + ret = priv->ops->detect(priv); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to detect switch\n"); + return ret; + } + + ds->priv = priv; + ds->dev = priv->dev; + ds->ops = priv->variant->ds_ops; + ds->phylink_mac_ops = priv->variant->phylink_mac_ops; + ds->num_ports = priv->num_ports; + + ret = dsa_register_switch(ds); + if (ret) { + dev_err_probe(priv->dev, ret, "unable to register switch\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, "REALTEK_DSA"); + +/** + * rtl83xx_unregister_switch() - unregister a switch + * @priv: realtek_priv pointer + * + * This function unregister a DSA switch. + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_unregister_switch(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_unregister_switch(ds); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, "REALTEK_DSA"); + +/** + * rtl83xx_shutdown() - shutdown a switch + * @priv: realtek_priv pointer + * + * This function shuts down the DSA switch and cleans the platform driver data, + * to prevent realtek_{smi,mdio}_remove() from running afterwards, which is + * possible if the parent bus implements its own .shutdown() as .remove(). + * + * Context: Can sleep. + * Return: Nothing. + */ +void rtl83xx_shutdown(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + + dsa_switch_shutdown(ds); + + dev_set_drvdata(priv->dev, NULL); +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, "REALTEK_DSA"); + +/** + * rtl83xx_remove() - Cleanup a realtek switch driver + * @priv: realtek_priv pointer + * + * Placehold for common cleanup procedures. + * + * Context: Any + * Return: nothing + */ +void rtl83xx_remove(struct realtek_priv *priv) +{ +} +EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, "REALTEK_DSA"); + +void rtl83xx_reset_assert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_assert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to assert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, true); +} + +void rtl83xx_reset_deassert(struct realtek_priv *priv) +{ + int ret; + + ret = reset_control_deassert(priv->reset_ctl); + if (ret) + dev_warn(priv->dev, + "Failed to deassert the switch reset control: %pe\n", + ERR_PTR(ret)); + + gpiod_set_value(priv->reset, false); +} + +MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Realtek DSA switches common module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/realtek/rtl83xx.h b/drivers/net/dsa/realtek/rtl83xx.h new file mode 100644 index 000000000000..c8a0ff8fd75e --- /dev/null +++ b/drivers/net/dsa/realtek/rtl83xx.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL83XX_H +#define _RTL83XX_H + +struct realtek_interface_info { + int (*reg_read)(void *ctx, u32 reg, u32 *val); + int (*reg_write)(void *ctx, u32 reg, u32 val); +}; + +void rtl83xx_lock(void *ctx); +void rtl83xx_unlock(void *ctx); +int rtl83xx_setup_user_mdio(struct dsa_switch *ds); +struct realtek_priv * +rtl83xx_probe(struct device *dev, + const struct realtek_interface_info *interface_info); +int rtl83xx_register_switch(struct realtek_priv *priv); +void rtl83xx_unregister_switch(struct realtek_priv *priv); +void rtl83xx_shutdown(struct realtek_priv *priv); +void rtl83xx_remove(struct realtek_priv *priv); +void rtl83xx_reset_assert(struct realtek_priv *priv); +void rtl83xx_reset_deassert(struct realtek_priv *priv); + +#endif /* _RTL83XX_H */ diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c index 2eda10b33f2e..4d857e3be10b 100644 --- a/drivers/net/dsa/rzn1_a5psw.c +++ b/drivers/net/dsa/rzn1_a5psw.c @@ -239,23 +239,31 @@ static void a5psw_phylink_get_caps(struct dsa_switch *ds, int port, } static struct phylink_pcs * -a5psw_phylink_mac_select_pcs(struct dsa_switch *ds, int port, +a5psw_phylink_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { - struct dsa_port *dp = dsa_to_port(ds, port); - struct a5psw *a5psw = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct a5psw *a5psw = dp->ds->priv; + + if (dsa_port_is_cpu(dp)) + return NULL; - if (!dsa_port_is_cpu(dp) && a5psw->pcs[port]) - return a5psw->pcs[port]; + return a5psw->pcs[dp->index]; +} - return NULL; +static void a5psw_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ } -static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port, +static void a5psw_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - struct a5psw *a5psw = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct a5psw *a5psw = dp->ds->priv; + int port = dp->index; u32 cmd_cfg; cmd_cfg = a5psw_reg_readl(a5psw, A5PSW_CMD_CFG(port)); @@ -263,15 +271,17 @@ static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port, a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg); } -static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port, +static void a5psw_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, - int duplex, bool tx_pause, bool rx_pause) + int speed, int duplex, bool tx_pause, + bool rx_pause) { u32 cmd_cfg = A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA | A5PSW_CMD_CFG_TX_CRC_APPEND; - struct a5psw *a5psw = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct a5psw *a5psw = dp->ds->priv; if (speed == SPEED_1000) cmd_cfg |= A5PSW_CMD_CFG_ETH_SPEED; @@ -284,7 +294,7 @@ static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port, if (!rx_pause) cmd_cfg &= ~A5PSW_CMD_CFG_PAUSE_IGNORE; - a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg); + a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(dp->index), cmd_cfg); } static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) @@ -327,8 +337,9 @@ static void a5psw_port_rx_block_set(struct a5psw *a5psw, int port, bool block) static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port, bool set) { - u8 offsets[] = {A5PSW_UCAST_DEF_MASK, A5PSW_BCAST_DEF_MASK, - A5PSW_MCAST_DEF_MASK}; + static const u8 offsets[] = { + A5PSW_UCAST_DEF_MASK, A5PSW_BCAST_DEF_MASK, A5PSW_MCAST_DEF_MASK + }; int i; for (i = 0; i < ARRAY_SIZE(offsets); i++) @@ -792,10 +803,8 @@ static void a5psw_get_strings(struct dsa_switch *ds, int port, u32 stringset, if (stringset != ETH_SS_STATS) return; - for (u = 0; u < ARRAY_SIZE(a5psw_stats); u++) { - memcpy(data + u * ETH_GSTRING_LEN, a5psw_stats[u].name, - ETH_GSTRING_LEN); - } + for (u = 0; u < ARRAY_SIZE(a5psw_stats); u++) + ethtool_puts(&data, a5psw_stats[u].name); } static void a5psw_get_ethtool_stats(struct dsa_switch *ds, int port, @@ -992,15 +1001,19 @@ static int a5psw_setup(struct dsa_switch *ds) return 0; } +static const struct phylink_mac_ops a5psw_phylink_mac_ops = { + .mac_select_pcs = a5psw_phylink_mac_select_pcs, + .mac_config = a5psw_phylink_mac_config, + .mac_link_down = a5psw_phylink_mac_link_down, + .mac_link_up = a5psw_phylink_mac_link_up, +}; + static const struct dsa_switch_ops a5psw_switch_ops = { .get_tag_protocol = a5psw_get_tag_protocol, .setup = a5psw_setup, .port_disable = a5psw_port_disable, .port_enable = a5psw_port_enable, .phylink_get_caps = a5psw_phylink_get_caps, - .phylink_mac_select_pcs = a5psw_phylink_mac_select_pcs, - .phylink_mac_link_down = a5psw_phylink_mac_link_down, - .phylink_mac_link_up = a5psw_phylink_mac_link_up, .port_change_mtu = a5psw_port_change_mtu, .port_max_mtu = a5psw_port_max_mtu, .get_sset_count = a5psw_get_sset_count, @@ -1022,6 +1035,8 @@ static const struct dsa_switch_ops a5psw_switch_ops = { .port_fdb_add = a5psw_port_fdb_add, .port_fdb_del = a5psw_port_fdb_del, .port_fdb_dump = a5psw_port_fdb_dump, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int a5psw_mdio_wait_busy(struct a5psw *a5psw) @@ -1214,77 +1229,60 @@ static int a5psw_probe(struct platform_device *pdev) if (ret) return ret; - a5psw->hclk = devm_clk_get(dev, "hclk"); + a5psw->hclk = devm_clk_get_enabled(dev, "hclk"); if (IS_ERR(a5psw->hclk)) { dev_err(dev, "failed get hclk clock\n"); ret = PTR_ERR(a5psw->hclk); goto free_pcs; } - a5psw->clk = devm_clk_get(dev, "clk"); + a5psw->clk = devm_clk_get_enabled(dev, "clk"); if (IS_ERR(a5psw->clk)) { dev_err(dev, "failed get clk_switch clock\n"); ret = PTR_ERR(a5psw->clk); goto free_pcs; } - ret = clk_prepare_enable(a5psw->clk); - if (ret) - goto free_pcs; - - ret = clk_prepare_enable(a5psw->hclk); - if (ret) - goto clk_disable; - - mdio = of_get_child_by_name(dev->of_node, "mdio"); - if (of_device_is_available(mdio)) { + mdio = of_get_available_child_by_name(dev->of_node, "mdio"); + if (mdio) { ret = a5psw_probe_mdio(a5psw, mdio); + of_node_put(mdio); if (ret) { - of_node_put(mdio); dev_err(dev, "Failed to register MDIO: %d\n", ret); - goto hclk_disable; + goto free_pcs; } } - of_node_put(mdio); - ds = &a5psw->ds; ds->dev = dev; ds->num_ports = A5PSW_PORTS_NUM; ds->ops = &a5psw_switch_ops; + ds->phylink_mac_ops = &a5psw_phylink_mac_ops; ds->priv = a5psw; ret = dsa_register_switch(ds); if (ret) { dev_err(dev, "Failed to register DSA switch: %d\n", ret); - goto hclk_disable; + goto free_pcs; } return 0; -hclk_disable: - clk_disable_unprepare(a5psw->hclk); -clk_disable: - clk_disable_unprepare(a5psw->clk); free_pcs: a5psw_pcs_free(a5psw); return ret; } -static int a5psw_remove(struct platform_device *pdev) +static void a5psw_remove(struct platform_device *pdev) { struct a5psw *a5psw = platform_get_drvdata(pdev); if (!a5psw) - return 0; + return; dsa_unregister_switch(&a5psw->ds); a5psw_pcs_free(a5psw); - clk_disable_unprepare(a5psw->hclk); - clk_disable_unprepare(a5psw->clk); - - return 0; } static void a5psw_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index dee35ba924ad..dceb96ae9c83 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -132,6 +132,8 @@ struct sja1105_info { int max_frame_mem; int num_ports; bool multiple_cascade_ports; + /* Every {port, TXQ} has its own CBS shaper */ + bool fixed_cbs_mapping; enum dsa_tag_protocol tag_proto; const struct sja1105_dynamic_table_ops *dyn_ops; const struct sja1105_table_ops *static_ops; @@ -264,6 +266,8 @@ struct sja1105_private { * the switch doesn't confuse them with one another. */ struct mutex mgmt_lock; + /* Serializes accesses to the FDB */ + struct mutex fdb_lock; /* PTP two-step TX timestamp ID, and its serialization lock */ spinlock_t ts_id_lock; u8 ts_id; @@ -274,7 +278,7 @@ struct sja1105_private { struct mii_bus *mdio_base_t1; struct mii_bus *mdio_base_tx; struct mii_bus *mdio_pcs; - struct dw_xpcs *xpcs[SJA1105_MAX_NUM_PORTS]; + struct phylink_pcs *pcs[SJA1105_MAX_NUM_PORTS]; struct sja1105_ptp_data ptp_data; struct sja1105_tas_data tas_data; }; diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index e3699f76f6d7..08a3e7b96254 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -153,14 +153,14 @@ static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, { const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl mii_tx_clk; - const int mac_clk_sources[] = { + static const int mac_clk_sources[] = { CLKSRC_MII0_TX_CLK, CLKSRC_MII1_TX_CLK, CLKSRC_MII2_TX_CLK, CLKSRC_MII3_TX_CLK, CLKSRC_MII4_TX_CLK, }; - const int phy_clk_sources[] = { + static const int phy_clk_sources[] = { CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, @@ -194,7 +194,7 @@ sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl mii_rx_clk; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; - const int clk_sources[] = { + static const int clk_sources[] = { CLKSRC_MII0_RX_CLK, CLKSRC_MII1_RX_CLK, CLKSRC_MII2_RX_CLK, @@ -221,7 +221,7 @@ sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; - const int clk_sources[] = { + static const int clk_sources[] = { CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, @@ -248,7 +248,7 @@ sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; - const int clk_sources[] = { + static const int clk_sources[] = { CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, @@ -349,8 +349,13 @@ static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { clksrc = CLKSRC_PLL0; } else { - int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, - CLKSRC_IDIV3, CLKSRC_IDIV4}; + static const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; clksrc = clk_sources[port]; } @@ -638,7 +643,7 @@ static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl ref_clk; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; - const int clk_sources[] = { + static const int clk_sources[] = { CLKSRC_MII0_TX_CLK, CLKSRC_MII1_TX_CLK, CLKSRC_MII2_TX_CLK, diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c index 7729d3f8b7f5..984c0e604e8d 100644 --- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -1175,18 +1175,15 @@ const struct sja1105_dynamic_table_ops sja1110_dyn_ops[BLK_IDX_MAX_DYN] = { static int sja1105_dynamic_config_poll_valid(struct sja1105_private *priv, - struct sja1105_dyn_cmd *cmd, - const struct sja1105_dynamic_table_ops *ops) + const struct sja1105_dynamic_table_ops *ops, + void *entry, bool check_valident, + bool check_errors) { u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {}; + struct sja1105_dyn_cmd cmd = {}; int rc; - /* We don't _need_ to read the full entry, just the command area which - * is a fixed SJA1105_SIZE_DYN_CMD. But our cmd_packing() API expects a - * buffer that contains the full entry too. Additionally, our API - * doesn't really know how many bytes into the buffer does the command - * area really begin. So just read back the whole entry. - */ + /* Read back the whole entry + command structure. */ rc = sja1105_xfer_buf(priv, SPI_READ, ops->addr, packed_buf, ops->packed_size); if (rc) @@ -1195,11 +1192,25 @@ sja1105_dynamic_config_poll_valid(struct sja1105_private *priv, /* Unpack the command structure, and return it to the caller in case it * needs to perform further checks on it (VALIDENT). */ - memset(cmd, 0, sizeof(*cmd)); - ops->cmd_packing(packed_buf, cmd, UNPACK); + ops->cmd_packing(packed_buf, &cmd, UNPACK); /* Hardware hasn't cleared VALID => still working on it */ - return cmd->valid ? -EAGAIN : 0; + if (cmd.valid) + return -EAGAIN; + + if (check_valident && !cmd.valident && !(ops->access & OP_VALID_ANYWAY)) + return -ENOENT; + + if (check_errors && cmd.errors) + return -EINVAL; + + /* Don't dereference possibly NULL pointer - maybe caller + * only wanted to see whether the entry existed or not. + */ + if (entry) + ops->entry_packing(packed_buf, entry, UNPACK); + + return 0; } /* Poll the dynamic config entry's control area until the hardware has @@ -1208,16 +1219,19 @@ sja1105_dynamic_config_poll_valid(struct sja1105_private *priv, */ static int sja1105_dynamic_config_wait_complete(struct sja1105_private *priv, - struct sja1105_dyn_cmd *cmd, - const struct sja1105_dynamic_table_ops *ops) + const struct sja1105_dynamic_table_ops *ops, + void *entry, bool check_valident, + bool check_errors) { - int rc; - - return read_poll_timeout(sja1105_dynamic_config_poll_valid, - rc, rc != -EAGAIN, - SJA1105_DYNAMIC_CONFIG_SLEEP_US, - SJA1105_DYNAMIC_CONFIG_TIMEOUT_US, - false, priv, cmd, ops); + int err, rc; + + err = read_poll_timeout(sja1105_dynamic_config_poll_valid, + rc, rc != -EAGAIN, + SJA1105_DYNAMIC_CONFIG_SLEEP_US, + SJA1105_DYNAMIC_CONFIG_TIMEOUT_US, + false, priv, ops, entry, check_valident, + check_errors); + return err < 0 ? err : rc; } /* Provides read access to the settings through the dynamic interface @@ -1286,25 +1300,14 @@ int sja1105_dynamic_config_read(struct sja1105_private *priv, mutex_lock(&priv->dynamic_config_lock); rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); - if (rc < 0) { - mutex_unlock(&priv->dynamic_config_lock); - return rc; - } - - rc = sja1105_dynamic_config_wait_complete(priv, &cmd, ops); - mutex_unlock(&priv->dynamic_config_lock); if (rc < 0) - return rc; + goto out; - if (!cmd.valident && !(ops->access & OP_VALID_ANYWAY)) - return -ENOENT; + rc = sja1105_dynamic_config_wait_complete(priv, ops, entry, true, false); +out: + mutex_unlock(&priv->dynamic_config_lock); - /* Don't dereference possibly NULL pointer - maybe caller - * only wanted to see whether the entry existed or not. - */ - if (entry) - ops->entry_packing(packed_buf, entry, UNPACK); - return 0; + return rc; } int sja1105_dynamic_config_write(struct sja1105_private *priv, @@ -1356,22 +1359,14 @@ int sja1105_dynamic_config_write(struct sja1105_private *priv, mutex_lock(&priv->dynamic_config_lock); rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); - if (rc < 0) { - mutex_unlock(&priv->dynamic_config_lock); - return rc; - } - - rc = sja1105_dynamic_config_wait_complete(priv, &cmd, ops); - mutex_unlock(&priv->dynamic_config_lock); if (rc < 0) - return rc; + goto out; - cmd = (struct sja1105_dyn_cmd) {0}; - ops->cmd_packing(packed_buf, &cmd, UNPACK); - if (cmd.errors) - return -EINVAL; + rc = sja1105_dynamic_config_wait_complete(priv, ops, NULL, false, true); +out: + mutex_unlock(&priv->dynamic_config_lock); - return 0; + return rc; } static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly) diff --git a/drivers/net/dsa/sja1105/sja1105_ethtool.c b/drivers/net/dsa/sja1105/sja1105_ethtool.c index decc6c931dc1..84d7d3f66bd0 100644 --- a/drivers/net/dsa/sja1105/sja1105_ethtool.c +++ b/drivers/net/dsa/sja1105/sja1105_ethtool.c @@ -571,6 +571,9 @@ void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; for (i = 0; i < max_ctr; i++) { + if (!strlen(sja1105_port_counters[i].name)) + continue; + rc = sja1105_port_counter_read(priv, port, i, &data[k++]); if (rc) { dev_err(ds->dev, @@ -586,7 +589,6 @@ void sja1105_get_strings(struct dsa_switch *ds, int port, { struct sja1105_private *priv = ds->priv; enum sja1105_counter_index max_ctr, i; - char *p = data; if (stringset != ETH_SS_STATS) return; @@ -598,8 +600,10 @@ void sja1105_get_strings(struct dsa_switch *ds, int port, max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; for (i = 0; i < max_ctr; i++) { - strscpy(p, sja1105_port_counters[i].name, ETH_GSTRING_LEN); - p += ETH_GSTRING_LEN; + if (!strlen(sja1105_port_counters[i].name)) + continue; + + ethtool_puts(&data, sja1105_port_counters[i].name); } } diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c index 9e8ca182c722..05d8ed3121e7 100644 --- a/drivers/net/dsa/sja1105/sja1105_flower.c +++ b/drivers/net/dsa/sja1105/sja1105_flower.c @@ -214,6 +214,9 @@ static int sja1105_flower_parse_key(struct sja1105_private *priv, return -EOPNOTSUPP; } + if (flow_rule_match_has_control_flags(rule, extack)) + return -EOPNOTSUPP; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { struct flow_match_basic match; diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 331bb1c6676a..aa2145cf29a6 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -15,12 +15,13 @@ #include <linux/of.h> #include <linux/of_net.h> #include <linux/of_mdio.h> -#include <linux/pcs/pcs-xpcs.h> #include <linux/netdev_features.h> #include <linux/netdevice.h> #include <linux/if_bridge.h> #include <linux/if_ether.h> #include <linux/dsa/8021q.h> +#include <linux/units.h> + #include "sja1105.h" #include "sja1105_tas.h" @@ -1186,9 +1187,8 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, struct device_node *ports_node) { struct device *dev = &priv->spidev->dev; - struct device_node *child; - for_each_available_child_of_node(ports_node, child) { + for_each_available_child_of_node_scoped(ports_node, child) { struct device_node *phy_node; phy_interface_t phy_mode; u32 index; @@ -1198,7 +1198,6 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, if (of_property_read_u32(child, "reg", &index) < 0) { dev_err(dev, "Port number not defined in device tree " "(property \"reg\")\n"); - of_node_put(child); return -ENODEV; } @@ -1208,7 +1207,6 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, dev_err(dev, "Failed to read phy-mode or " "phy-interface-type property for port %d\n", index); - of_node_put(child); return -ENODEV; } @@ -1217,7 +1215,6 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, if (!of_phy_is_fixed_link(child)) { dev_err(dev, "phy-handle or fixed-link " "properties missing!\n"); - of_node_put(child); return -ENODEV; } /* phy-handle is missing, but fixed-link isn't. @@ -1231,10 +1228,8 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, priv->phy_mode[index] = phy_mode; err = sja1105_parse_rgmii_delays(priv, index, child); - if (err) { - of_node_put(child); + if (err) return err; - } } return 0; @@ -1261,29 +1256,11 @@ static int sja1105_parse_dt(struct sja1105_private *priv) return rc; } -/* Convert link speed from SJA1105 to ethtool encoding */ -static int sja1105_port_speed_to_ethtool(struct sja1105_private *priv, - u64 speed) -{ - if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) - return SPEED_10; - if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) - return SPEED_100; - if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) - return SPEED_1000; - if (speed == priv->info->port_speed[SJA1105_SPEED_2500MBPS]) - return SPEED_2500; - return SPEED_UNKNOWN; -} - -/* Set link speed in the MAC configuration for a specific port. */ -static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, - int speed_mbps) +static int sja1105_set_port_speed(struct sja1105_private *priv, int port, + int speed_mbps) { struct sja1105_mac_config_entry *mac; - struct device *dev = priv->ds->dev; u64 speed; - int rc; /* On P/Q/R/S, one can read from the device via the MAC reconfiguration * tables. On E/T, MAC reconfig tables are not readable, only writable. @@ -1317,7 +1294,7 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; break; default: - dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + dev_err(priv->ds->dev, "Invalid speed %iMbps\n", speed_mbps); return -EINVAL; } @@ -1325,15 +1302,28 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, * table, since this will be used for the clocking setup, and we no * longer need to store it in the static config (already told hardware * we want auto during upload phase). - * Actually for the SGMII port, the MAC is fixed at 1 Gbps and - * we need to configure the PCS only (if even that). */ - if (priv->phy_mode[port] == PHY_INTERFACE_MODE_SGMII) - mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; - else if (priv->phy_mode[port] == PHY_INTERFACE_MODE_2500BASEX) - mac[port].speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; - else - mac[port].speed = speed; + mac[port].speed = speed; + + return 0; +} + +/* Write the MAC Configuration Table entry and, if necessary, the CGU settings, + * after a link speedchange for this port. + */ +static int sja1105_set_port_config(struct sja1105_private *priv, int port) +{ + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + int rc; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; /* Write to the dynamic reconfiguration tables */ rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, @@ -1356,34 +1346,42 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, } static struct phylink_pcs * -sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface) +sja1105_mac_select_pcs(struct phylink_config *config, phy_interface_t iface) { - struct sja1105_private *priv = ds->priv; - struct dw_xpcs *xpcs = priv->xpcs[port]; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct sja1105_private *priv = dp->ds->priv; - if (xpcs) - return &xpcs->pcs; + return priv->pcs[dp->index]; +} - return NULL; +static void sja1105_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ } -static void sja1105_mac_link_down(struct dsa_switch *ds, int port, +static void sja1105_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface) { - sja1105_inhibit_tx(ds->priv, BIT(port), true); + struct dsa_port *dp = dsa_phylink_to_port(config); + + sja1105_inhibit_tx(dp->ds->priv, BIT(dp->index), true); } -static void sja1105_mac_link_up(struct dsa_switch *ds, int port, +static void sja1105_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, phy_interface_t interface, - struct phy_device *phydev, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct sja1105_private *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct sja1105_private *priv = dp->ds->priv; + int port = dp->index; - sja1105_adjust_port_config(priv, port, speed); + if (!sja1105_set_port_speed(priv, port, speed)) + sja1105_set_port_config(priv, port); sja1105_inhibit_tx(priv, BIT(port), false); } @@ -1798,6 +1796,7 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port, struct dsa_db db) { struct sja1105_private *priv = ds->priv; + int rc; if (!vid) { switch (db.type) { @@ -1812,12 +1811,16 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port, } } - return priv->info->fdb_add_cmd(ds, port, addr, vid); + mutex_lock(&priv->fdb_lock); + rc = priv->info->fdb_add_cmd(ds, port, addr, vid); + mutex_unlock(&priv->fdb_lock); + + return rc; } -static int sja1105_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) +static int __sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) { struct sja1105_private *priv = ds->priv; @@ -1837,6 +1840,20 @@ static int sja1105_fdb_del(struct dsa_switch *ds, int port, return priv->info->fdb_del_cmd(ds, port, addr, vid); } +static int sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + mutex_lock(&priv->fdb_lock); + rc = __sja1105_fdb_del(ds, port, addr, vid, db); + mutex_unlock(&priv->fdb_lock); + + return rc; +} + static int sja1105_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, void *data) { @@ -1868,13 +1885,14 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, if (!(l2_lookup.destports & BIT(port))) continue; - /* We need to hide the FDB entry for unknown multicast */ - if (l2_lookup.macaddr == SJA1105_UNKNOWN_MULTICAST && - l2_lookup.mask_macaddr == SJA1105_UNKNOWN_MULTICAST) - continue; - u64_to_ether_addr(l2_lookup.macaddr, macaddr); + /* Hardware FDB is shared for fdb and mdb, "bridge fdb show" + * only wants to see unicast + */ + if (is_multicast_ether_addr(macaddr)) + continue; + /* We need to hide the dsa_8021q VLANs from the user. */ if (vid_is_dsa_8021q(l2_lookup.vlanid)) l2_lookup.vlanid = 0; @@ -1898,6 +1916,8 @@ static void sja1105_fast_age(struct dsa_switch *ds, int port) }; int i; + mutex_lock(&priv->fdb_lock); + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { struct sja1105_l2_lookup_entry l2_lookup = {0}; u8 macaddr[ETH_ALEN]; @@ -1911,7 +1931,7 @@ static void sja1105_fast_age(struct dsa_switch *ds, int port) if (rc) { dev_err(ds->dev, "Failed to read FDB: %pe\n", ERR_PTR(rc)); - return; + break; } if (!(l2_lookup.destports & BIT(port))) @@ -1923,14 +1943,16 @@ static void sja1105_fast_age(struct dsa_switch *ds, int port) u64_to_ether_addr(l2_lookup.macaddr, macaddr); - rc = sja1105_fdb_del(ds, port, macaddr, l2_lookup.vlanid, db); + rc = __sja1105_fdb_del(ds, port, macaddr, l2_lookup.vlanid, db); if (rc) { dev_err(ds->dev, "Failed to delete FDB entry %pM vid %lld: %pe\n", macaddr, l2_lookup.vlanid, ERR_PTR(rc)); - return; + break; } } + + mutex_unlock(&priv->fdb_lock); } static int sja1105_mdb_add(struct dsa_switch *ds, int port, @@ -2052,6 +2074,7 @@ static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, switch (state) { case BR_STATE_DISABLED: case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: /* From UM10944 description of DRPDTAG (why put this there?): * "Management traffic flows to the port regardless of the state * of the INGRESS flag". So BPDUs are still be allowed to pass. @@ -2061,11 +2084,6 @@ static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, mac[port].egress = false; mac[port].dyn_learn = false; break; - case BR_STATE_LISTENING: - mac[port].ingress = true; - mac[port].egress = false; - mac[port].dyn_learn = false; - break; case BR_STATE_LEARNING: mac[port].ingress = true; mac[port].egress = false; @@ -2096,14 +2114,13 @@ static int sja1105_bridge_join(struct dsa_switch *ds, int port, if (rc) return rc; - rc = dsa_tag_8021q_bridge_join(ds, port, bridge); + rc = dsa_tag_8021q_bridge_join(ds, port, bridge, tx_fwd_offload, + extack); if (rc) { sja1105_bridge_member(ds, port, bridge, false); return rc; } - *tx_fwd_offload = true; - return 0; } @@ -2114,12 +2131,36 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port, sja1105_bridge_member(ds, port, bridge, false); } -#define BYTES_PER_KBIT (1000LL / 8) +/* Port 0 (the uC port) does not have CBS shapers */ +#define SJA1110_FIXED_CBS(port, prio) ((((port) - 1) * SJA1105_NUM_TC) + (prio)) + +static int sja1105_find_cbs_shaper(struct sja1105_private *priv, + int port, int prio) +{ + int i; + + if (priv->info->fixed_cbs_mapping) { + i = SJA1110_FIXED_CBS(port, prio); + if (i >= 0 && i < priv->info->num_cbs_shapers) + return i; + + return -1; + } + + for (i = 0; i < priv->info->num_cbs_shapers; i++) + if (priv->cbs[i].port == port && priv->cbs[i].prio == prio) + return i; + + return -1; +} static int sja1105_find_unused_cbs_shaper(struct sja1105_private *priv) { int i; + if (priv->info->fixed_cbs_mapping) + return -1; + for (i = 0; i < priv->info->num_cbs_shapers; i++) if (!priv->cbs[i].idle_slope && !priv->cbs[i].send_slope) return i; @@ -2150,14 +2191,20 @@ static int sja1105_setup_tc_cbs(struct dsa_switch *ds, int port, { struct sja1105_private *priv = ds->priv; struct sja1105_cbs_entry *cbs; + s64 port_transmit_rate_kbps; int index; if (!offload->enable) return sja1105_delete_cbs_shaper(priv, port, offload->queue); - index = sja1105_find_unused_cbs_shaper(priv); - if (index < 0) - return -ENOSPC; + /* The user may be replacing an existing shaper */ + index = sja1105_find_cbs_shaper(priv, port, offload->queue); + if (index < 0) { + /* That isn't the case - see if we can allocate a new one */ + index = sja1105_find_unused_cbs_shaper(priv); + if (index < 0) + return -ENOSPC; + } cbs = &priv->cbs[index]; cbs->port = port; @@ -2167,9 +2214,17 @@ static int sja1105_setup_tc_cbs(struct dsa_switch *ds, int port, */ cbs->credit_hi = offload->hicredit; cbs->credit_lo = abs(offload->locredit); - /* User space is in kbits/sec, hardware in bytes/sec */ - cbs->idle_slope = offload->idleslope * BYTES_PER_KBIT; - cbs->send_slope = abs(offload->sendslope * BYTES_PER_KBIT); + /* User space is in kbits/sec, while the hardware in bytes/sec times + * link speed. Since the given offload->sendslope is good only for the + * current link speed anyway, and user space is likely to reprogram it + * when that changes, don't even bother to track the port's link speed, + * but deduce the port transmit rate from idleslope - sendslope. + */ + port_transmit_rate_kbps = offload->idleslope - offload->sendslope; + cbs->idle_slope = div_s64(offload->idleslope * BYTES_PER_KBIT, + port_transmit_rate_kbps); + cbs->send_slope = div_s64(abs(offload->sendslope * BYTES_PER_KBIT), + port_transmit_rate_kbps); /* Convert the negative values from 64-bit 2's complement * to 32-bit 2's complement (for the case of 0x80000000 whose * negative is still negative). @@ -2225,8 +2280,8 @@ int sja1105_static_config_reload(struct sja1105_private *priv, { struct ptp_system_timestamp ptp_sts_before; struct ptp_system_timestamp ptp_sts_after; - int speed_mbps[SJA1105_MAX_NUM_PORTS]; u16 bmcr[SJA1105_MAX_NUM_PORTS] = {0}; + u64 mac_speed[SJA1105_MAX_NUM_PORTS]; struct sja1105_mac_config_entry *mac; struct dsa_switch *ds = priv->ds; s64 t1, t2, t3, t4; @@ -2234,21 +2289,21 @@ int sja1105_static_config_reload(struct sja1105_private *priv, int rc, i; s64 now; + mutex_lock(&priv->fdb_lock); mutex_lock(&priv->mgmt_lock); mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; - /* Back up the dynamic link speed changed by sja1105_adjust_port_config + /* Back up the dynamic link speed changed by sja1105_set_port_speed() * in order to temporarily restore it to SJA1105_SPEED_AUTO - which the * switch wants to see in the static config in order to allow us to * change it through the dynamic interface later. */ for (i = 0; i < ds->num_ports; i++) { - speed_mbps[i] = sja1105_port_speed_to_ethtool(priv, - mac[i].speed); + mac_speed[i] = mac[i].speed; mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO]; - if (priv->xpcs[i]) + if (priv->pcs[i]) bmcr[i] = mdiobus_c45_read(priv->mdio_pcs, i, MDIO_MMD_VEND2, MDIO_CTRL1); } @@ -2305,14 +2360,15 @@ int sja1105_static_config_reload(struct sja1105_private *priv, } for (i = 0; i < ds->num_ports; i++) { - struct dw_xpcs *xpcs = priv->xpcs[i]; + struct phylink_pcs *pcs = priv->pcs[i]; unsigned int neg_mode; - rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]); + mac[i].speed = mac_speed[i]; + rc = sja1105_set_port_config(priv, i); if (rc < 0) goto out; - if (!xpcs) + if (!pcs) continue; if (bmcr[i] & BMCR_ANENABLE) @@ -2320,7 +2376,8 @@ int sja1105_static_config_reload(struct sja1105_private *priv, else neg_mode = PHYLINK_PCS_NEG_OUTBAND; - rc = xpcs_do_config(xpcs, priv->phy_mode[i], NULL, neg_mode); + rc = pcs->ops->pcs_config(pcs, neg_mode, priv->phy_mode[i], + NULL, true); if (rc < 0) goto out; @@ -2336,8 +2393,8 @@ int sja1105_static_config_reload(struct sja1105_private *priv, else speed = SPEED_10; - xpcs_link_up(&xpcs->pcs, neg_mode, priv->phy_mode[i], - speed, DUPLEX_FULL); + pcs->ops->pcs_link_up(pcs, neg_mode, priv->phy_mode[i], + speed, DUPLEX_FULL); } } @@ -2346,6 +2403,7 @@ int sja1105_static_config_reload(struct sja1105_private *priv, goto out; out: mutex_unlock(&priv->mgmt_lock); + mutex_unlock(&priv->fdb_lock); return rc; } @@ -2623,7 +2681,7 @@ static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot, } /* Transfer skb to the host port. */ - dsa_enqueue_skb(skb, dsa_to_port(ds, port)->slave); + dsa_enqueue_skb(skb, dsa_to_port(ds, port)->user); /* Wait until the switch has processed the frame */ do { @@ -2915,7 +2973,9 @@ static int sja1105_port_mcast_flood(struct sja1105_private *priv, int to, { struct sja1105_l2_lookup_entry *l2_lookup; struct sja1105_table *table; - int match; + int match, rc; + + mutex_lock(&priv->fdb_lock); table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; l2_lookup = table->entries; @@ -2928,7 +2988,8 @@ static int sja1105_port_mcast_flood(struct sja1105_private *priv, int to, if (match == table->entry_count) { NL_SET_ERR_MSG_MOD(extack, "Could not find FDB entry for unknown multicast"); - return -ENOSPC; + rc = -ENOSPC; + goto out; } if (flags.val & BR_MCAST_FLOOD) @@ -2936,10 +2997,13 @@ static int sja1105_port_mcast_flood(struct sja1105_private *priv, int to, else l2_lookup[match].destports &= ~BIT(to); - return sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, - l2_lookup[match].index, - &l2_lookup[match], - true); + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup[match].index, + &l2_lookup[match], true); +out: + mutex_unlock(&priv->fdb_lock); + + return rc; } static int sja1105_port_pre_bridge_flags(struct dsa_switch *ds, int port, @@ -3010,7 +3074,7 @@ static int sja1105_port_bridge_flags(struct dsa_switch *ds, int port, * ref_clk pin. So port clocking needs to be initialized early, before * connecting to PHYs is attempted, otherwise they won't respond through MDIO. * Setting correct PHY link speed does not matter now. - * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY + * But dsa_user_phy_setup is called later than sja1105_setup, so the PHY * bindings are not yet parsed by DSA core. We need to parse early so that we * can populate the xMII mode parameters table. */ @@ -3082,10 +3146,8 @@ static int sja1105_setup(struct dsa_switch *ds) * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid. */ ds->vlan_filtering_is_global = true; - ds->untag_bridge_pvid = true; ds->fdb_isolation = true; - /* tag_8021q has 3 bits for the VBID, and the value 0 is reserved */ - ds->max_num_bridges = 7; + ds->max_num_bridges = DSA_TAG_8021Q_MAX_NUM_BRIDGES; /* Advertise the 8 egress queues */ ds->num_tx_queues = SJA1105_NUM_TC; @@ -3126,6 +3188,13 @@ static void sja1105_teardown(struct dsa_switch *ds) sja1105_static_config_free(&priv->static_config); } +static const struct phylink_mac_ops sja1105_phylink_mac_ops = { + .mac_select_pcs = sja1105_mac_select_pcs, + .mac_config = sja1105_mac_config, + .mac_link_up = sja1105_mac_link_up, + .mac_link_down = sja1105_mac_link_down, +}; + static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .connect_tag_protocol = sja1105_connect_tag_protocol, @@ -3135,9 +3204,6 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_change_mtu = sja1105_change_mtu, .port_max_mtu = sja1105_get_max_mtu, .phylink_get_caps = sja1105_phylink_get_caps, - .phylink_mac_select_pcs = sja1105_mac_select_pcs, - .phylink_mac_link_up = sja1105_mac_link_up, - .phylink_mac_link_down = sja1105_mac_link_down, .get_strings = sja1105_get_strings, .get_ethtool_stats = sja1105_get_ethtool_stats, .get_sset_count = sja1105_get_sset_count, @@ -3303,12 +3369,14 @@ static int sja1105_probe(struct spi_device *spi) ds->dev = dev; ds->num_ports = priv->info->num_ports; ds->ops = &sja1105_switch_ops; + ds->phylink_mac_ops = &sja1105_phylink_mac_ops; ds->priv = priv; priv->ds = ds; mutex_init(&priv->ptp_data.lock); mutex_init(&priv->dynamic_config_lock); mutex_init(&priv->mgmt_lock); + mutex_init(&priv->fdb_lock); spin_lock_init(&priv->ts_id_lock); rc = sja1105_parse_dt(priv); @@ -3383,7 +3451,6 @@ MODULE_DEVICE_TABLE(spi, sja1105_spi_ids); static struct spi_driver sja1105_driver = { .driver = { .name = "sja1105", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(sja1105_dt_ids), }, .id_table = sja1105_spi_ids, diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c index 833e55e4b961..8d535c033cef 100644 --- a/drivers/net/dsa/sja1105/sja1105_mdio.c +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -94,7 +94,7 @@ int sja1110_pcs_mdio_read_c45(struct mii_bus *bus, int phy, int mmd, int reg) return tmp & 0xffff; } -int sja1110_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int reg, int mmd, +int sja1110_pcs_mdio_write_c45(struct mii_bus *bus, int phy, int mmd, int reg, u16 val) { struct sja1105_mdio_private *mdio_priv = bus->priv; @@ -400,7 +400,7 @@ static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv) } for (port = 0; port < ds->num_ports; port++) { - struct dw_xpcs *xpcs; + struct phylink_pcs *pcs; if (dsa_is_unused_port(ds, port)) continue; @@ -409,13 +409,13 @@ static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv) priv->phy_mode[port] != PHY_INTERFACE_MODE_2500BASEX) continue; - xpcs = xpcs_create_mdiodev(bus, port, priv->phy_mode[port]); - if (IS_ERR(xpcs)) { - rc = PTR_ERR(xpcs); + pcs = xpcs_create_pcs_mdiodev(bus, port); + if (IS_ERR(pcs)) { + rc = PTR_ERR(pcs); goto out_pcs_free; } - priv->xpcs[port] = xpcs; + priv->pcs[port] = pcs; } priv->mdio_pcs = bus; @@ -424,11 +424,10 @@ static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv) out_pcs_free: for (port = 0; port < ds->num_ports; port++) { - if (!priv->xpcs[port]) - continue; - - xpcs_destroy(priv->xpcs[port]); - priv->xpcs[port] = NULL; + if (priv->pcs[port]) { + xpcs_destroy_pcs(priv->pcs[port]); + priv->pcs[port] = NULL; + } } mdiobus_unregister(bus); @@ -446,11 +445,10 @@ static void sja1105_mdiobus_pcs_unregister(struct sja1105_private *priv) return; for (port = 0; port < ds->num_ports; port++) { - if (!priv->xpcs[port]) - continue; - - xpcs_destroy(priv->xpcs[port]); - priv->xpcs[port] = NULL; + if (priv->pcs[port]) { + xpcs_destroy_pcs(priv->pcs[port]); + priv->pcs[port] = NULL; + } } mdiobus_unregister(priv->mdio_pcs); @@ -470,13 +468,10 @@ int sja1105_mdiobus_register(struct dsa_switch *ds) if (rc) return rc; - mdio_node = of_get_child_by_name(switch_node, "mdios"); + mdio_node = of_get_available_child_by_name(switch_node, "mdios"); if (!mdio_node) return 0; - if (!of_device_is_available(mdio_node)) - goto out_put_mdio_node; - if (regs->mdio_100base_tx != SJA1105_RSV_ADDR) { rc = sja1105_mdiobus_base_tx_register(priv, mdio_node); if (rc) @@ -489,7 +484,6 @@ int sja1105_mdiobus_register(struct dsa_switch *ds) goto err_free_base_tx_mdiobus; } -out_put_mdio_node: of_node_put(mdio_node); return 0; diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index a7d41e781398..fefe46e2a5e6 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -58,60 +58,64 @@ enum sja1105_ptp_clk_mode { #define ptp_data_to_sja1105(d) \ container_of((d), struct sja1105_private, ptp_data) -int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct sja1105_private *priv = ds->priv; - struct hwtstamp_config config; + unsigned long hwts_tx_en, hwts_rx_en; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; + hwts_tx_en = priv->hwts_tx_en; + hwts_rx_en = priv->hwts_rx_en; - switch (config.tx_type) { + switch (config->tx_type) { case HWTSTAMP_TX_OFF: - priv->hwts_tx_en &= ~BIT(port); + hwts_tx_en &= ~BIT(port); break; case HWTSTAMP_TX_ON: - priv->hwts_tx_en |= BIT(port); + hwts_tx_en |= BIT(port); break; default: return -ERANGE; } - switch (config.rx_filter) { + switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: - priv->hwts_rx_en &= ~BIT(port); + hwts_rx_en &= ~BIT(port); break; - default: - priv->hwts_rx_en |= BIT(port); + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + hwts_rx_en |= BIT(port); break; + default: + return -ERANGE; } - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + priv->hwts_tx_en = hwts_tx_en; + priv->hwts_rx_en = hwts_rx_en; + return 0; } -int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct sja1105_private *priv = ds->priv; - struct hwtstamp_config config; - config.flags = 0; + config->flags = 0; if (priv->hwts_tx_en & BIT(port)) - config.tx_type = HWTSTAMP_TX_ON; + config->tx_type = HWTSTAMP_TX_ON; else - config.tx_type = HWTSTAMP_TX_OFF; + config->tx_type = HWTSTAMP_TX_OFF; if (priv->hwts_rx_en & BIT(port)) - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else - config.rx_filter = HWTSTAMP_FILTER_NONE; + config->rx_filter = HWTSTAMP_FILTER_NONE; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int sja1105_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { struct sja1105_private *priv = ds->priv; struct sja1105_ptp_data *ptp_data = &priv->ptp_data; @@ -727,10 +731,6 @@ static int sja1105_per_out_enable(struct sja1105_private *priv, if (perout->index != 0) return -EOPNOTSUPP; - /* Reject requests with unsupported flags */ - if (perout->flags) - return -EOPNOTSUPP; - mutex_lock(&ptp_data->lock); rc = sja1105_change_ptp_clk_pin_func(priv, PTP_PF_PEROUT); @@ -810,13 +810,6 @@ static int sja1105_extts_enable(struct sja1105_private *priv, if (extts->index != 0) return -EOPNOTSUPP; - /* Reject requests with unsupported flags */ - if (extts->flags & ~(PTP_ENABLE_FEATURE | - PTP_RISING_EDGE | - PTP_FALLING_EDGE | - PTP_STRICT_FLAGS)) - return -EOPNOTSUPP; - /* We can only enable time stamping on both edges, sadly. */ if ((extts->flags & PTP_STRICT_FLAGS) && (extts->flags & PTP_ENABLE_FEATURE) && @@ -832,7 +825,7 @@ static int sja1105_extts_enable(struct sja1105_private *priv, if (on) sja1105_ptp_extts_setup_timer(&priv->ptp_data); else - del_timer_sync(&priv->ptp_data.extts_timer); + timer_delete_sync(&priv->ptp_data.extts_timer); return 0; } @@ -902,6 +895,9 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) .n_pins = 1, .n_ext_ts = 1, .n_per_out = 1, + .supported_extts_flags = PTP_RISING_EDGE | + PTP_FALLING_EDGE | + PTP_STRICT_FLAGS, }; /* Only used on SJA1105 */ @@ -929,7 +925,7 @@ void sja1105_ptp_clock_unregister(struct dsa_switch *ds) if (IS_ERR_OR_NULL(ptp_data->clock)) return; - del_timer_sync(&ptp_data->extts_timer); + timer_delete_sync(&ptp_data->extts_timer); ptp_cancel_worker_sync(ptp_data->clock); skb_queue_purge(&ptp_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index 416461ee95d2..325e3777ea07 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -101,7 +101,7 @@ void sja1105pqrs_ptp_cmd_packing(u8 *buf, struct sja1105_ptp_cmd *cmd, enum packing_op op); int sja1105_get_ts_info(struct dsa_switch *ds, int port, - struct ethtool_ts_info *ts); + struct kernel_ethtool_ts_info *ts); void sja1105_ptp_txtstamp_skb(struct dsa_switch *ds, int slot, struct sk_buff *clone); @@ -112,9 +112,12 @@ bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, void sja1105_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); -int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); -int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); int __sja1105_ptp_gettimex(struct dsa_switch *ds, u64 *ns, struct ptp_system_timestamp *sts); diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index 5ce29c8057a4..834b5c1b4db0 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -781,6 +781,7 @@ const struct sja1105_info sja1110a_info = { .tag_proto = DSA_TAG_PROTO_SJA1110, .can_limit_mcast_flood = true, .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, .ptp_ts_bits = 32, .ptpegr_ts_bytes = 8, .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, @@ -831,6 +832,7 @@ const struct sja1105_info sja1110b_info = { .tag_proto = DSA_TAG_PROTO_SJA1110, .can_limit_mcast_flood = true, .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, .ptp_ts_bits = 32, .ptpegr_ts_bytes = 8, .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, @@ -881,6 +883,7 @@ const struct sja1105_info sja1110c_info = { .tag_proto = DSA_TAG_PROTO_SJA1110, .can_limit_mcast_flood = true, .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, .ptp_ts_bits = 32, .ptpegr_ts_bytes = 8, .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, @@ -931,6 +934,7 @@ const struct sja1105_info sja1110d_info = { .tag_proto = DSA_TAG_PROTO_SJA1110, .can_limit_mcast_flood = true, .multiple_cascade_ports = true, + .fixed_cbs_mapping = true, .ptp_ts_bits = 32, .ptpegr_ts_bytes = 8, .max_frame_mem = SJA1110_MAX_FRAME_MEMORY, diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index baba204ad62f..ffece8a400a6 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -26,12 +26,8 @@ void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) pr_err("Start bit (%d) expected to be larger than end (%d)\n", start, end); } else if (rc == -ERANGE) { - if ((start - end + 1) > 64) - pr_err("Field %d-%d too large for 64 bits!\n", - start, end); - else - pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", - *val, start, end); + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); } dump_stack(); } @@ -1921,8 +1917,10 @@ int sja1105_table_delete_entry(struct sja1105_table *table, int i) if (i > table->entry_count) return -ERANGE; - memmove(entries + i * entry_size, entries + (i + 1) * entry_size, - (table->entry_count - i) * entry_size); + if (i + 1 < table->entry_count) { + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i - 1) * entry_size); + } table->entry_count--; diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c index d7818710bc02..d5949d2c3e71 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.c +++ b/drivers/net/dsa/sja1105/sja1105_tas.c @@ -775,9 +775,8 @@ static void sja1105_tas_state_machine(struct work_struct *work) base_time_ts = ns_to_timespec64(base_time); now_ts = ns_to_timespec64(now); - dev_dbg(ds->dev, "OPER base time %lld.%09ld (now %lld.%09ld)\n", - base_time_ts.tv_sec, base_time_ts.tv_nsec, - now_ts.tv_sec, now_ts.tv_nsec); + dev_dbg(ds->dev, "OPER base time %ptSp (now %ptSp)\n", + &base_time_ts, &now_ts); break; @@ -798,8 +797,7 @@ static void sja1105_tas_state_machine(struct work_struct *work) if (now < tas_data->oper_base_time) { /* TAS has not started yet */ diff = ns_to_timespec64(tas_data->oper_base_time - now); - dev_dbg(ds->dev, "time to start: [%lld.%09ld]", - diff.tv_sec, diff.tv_nsec); + dev_dbg(ds->dev, "time to start: [%ptSp]", &diff); break; } diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 4f09e7438f3b..9d31b8258268 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -17,13 +17,17 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/iopoll.h> #include <linux/of.h> #include <linux/of_mdio.h> #include <linux/bitops.h> +#include <linux/bitfield.h> #include <linux/if_bridge.h> +#include <linux/if_vlan.h> #include <linux/etherdevice.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> +#include <linux/dsa/8021q.h> #include <linux/random.h> #include <net/dsa.h> @@ -33,11 +37,17 @@ #define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */ #define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */ #define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */ -#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */ +#define VSC73XX_BLOCK_CAPTURE 0x4 /* Subblocks 0-4, 6, 7 */ #define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */ #define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */ +/* MII Block subblock */ +#define VSC73XX_BLOCK_MII_INTERNAL 0x0 /* Internal MDIO subblock */ +#define VSC73XX_BLOCK_MII_EXTERNAL 0x1 /* External MDIO subblock */ + #define CPU_PORT 6 /* CPU port */ +#define VSC73XX_NUM_FDB_ROWS 2048 +#define VSC73XX_NUM_BUCKETS 4 /* MAC Block registers */ #define VSC73XX_MAC_CFG 0x00 @@ -61,6 +71,8 @@ #define VSC73XX_CAT_DROP 0x6e #define VSC73XX_CAT_PR_MISC_L2 0x6f #define VSC73XX_CAT_PR_USR_PRIO 0x75 +#define VSC73XX_CAT_VLAN_MISC 0x79 +#define VSC73XX_CAT_PORT_VLAN 0x7a #define VSC73XX_Q_MISC_CONF 0xdf /* MAC_CFG register bits */ @@ -121,6 +133,17 @@ #define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1) #define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0) +/* TXUPDCFG transmit modify setup bits */ +#define VSC73XX_TXUPDCFG_DSCP_REWR_MODE GENMASK(20, 19) +#define VSC73XX_TXUPDCFG_DSCP_REWR_ENA BIT(18) +#define VSC73XX_TXUPDCFG_TX_INT_TO_USRPRIO_ENA BIT(17) +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID GENMASK(15, 4) +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA BIT(3) +#define VSC73XX_TXUPDCFG_TX_UPDATE_CRC_CPU_ENA BIT(1) +#define VSC73XX_TXUPDCFG_TX_INSERT_TAG BIT(0) + +#define VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT 4 + /* CAT_DROP categorizer frame dropping register bits */ #define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6) #define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4) @@ -134,6 +157,15 @@ #define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1) #define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0) +/* CAT_VLAN_MISC categorizer VLAN miscellaneous bits */ +#define VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA BIT(8) +#define VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA BIT(7) + +/* CAT_PORT_VLAN categorizer port VLAN */ +#define VSC73XX_CAT_PORT_VLAN_VLAN_CFI BIT(15) +#define VSC73XX_CAT_PORT_VLAN_VLAN_USR_PRIO GENMASK(14, 12) +#define VSC73XX_CAT_PORT_VLAN_VLAN_VID GENMASK(11, 0) + /* Frame analyzer block 2 registers */ #define VSC73XX_STORMLIMIT 0x02 #define VSC73XX_ADVLEARN 0x03 @@ -163,6 +195,44 @@ #define VSC73XX_AGENCTRL 0xf0 #define VSC73XX_CAPRST 0xff +#define VSC73XX_SRCMASKS_CPU_COPY BIT(27) +#define VSC73XX_SRCMASKS_MIRROR BIT(26) +#define VSC73XX_SRCMASKS_PORTS_MASK GENMASK(7, 0) + +#define VSC73XX_MACHDATA_VID GENMASK(27, 16) +#define VSC73XX_MACHDATA_MAC0 GENMASK(15, 8) +#define VSC73XX_MACHDATA_MAC1 GENMASK(7, 0) +#define VSC73XX_MACLDATA_MAC2 GENMASK(31, 24) +#define VSC73XX_MACLDATA_MAC3 GENMASK(23, 16) +#define VSC73XX_MACLDATA_MAC4 GENMASK(15, 8) +#define VSC73XX_MACLDATA_MAC5 GENMASK(7, 0) + +#define VSC73XX_HASH0_VID_FROM_MASK GENMASK(5, 0) +#define VSC73XX_HASH0_MAC0_FROM_MASK GENMASK(7, 4) +#define VSC73XX_HASH1_MAC0_FROM_MASK GENMASK(3, 0) +#define VSC73XX_HASH1_MAC1_FROM_MASK GENMASK(7, 1) +#define VSC73XX_HASH2_MAC1_FROM_MASK BIT(0) +#define VSC73XX_HASH2_MAC2_FROM_MASK GENMASK(7, 0) +#define VSC73XX_HASH2_MAC3_FROM_MASK GENMASK(7, 6) +#define VSC73XX_HASH3_MAC3_FROM_MASK GENMASK(5, 0) +#define VSC73XX_HASH3_MAC4_FROM_MASK GENMASK(7, 3) +#define VSC73XX_HASH4_MAC4_FROM_MASK GENMASK(2, 0) + +#define VSC73XX_HASH0_VID_TO_MASK GENMASK(9, 4) +#define VSC73XX_HASH0_MAC0_TO_MASK GENMASK(3, 0) +#define VSC73XX_HASH1_MAC0_TO_MASK GENMASK(10, 7) +#define VSC73XX_HASH1_MAC1_TO_MASK GENMASK(6, 0) +#define VSC73XX_HASH2_MAC1_TO_MASK BIT(10) +#define VSC73XX_HASH2_MAC2_TO_MASK GENMASK(9, 2) +#define VSC73XX_HASH2_MAC3_TO_MASK GENMASK(1, 0) +#define VSC73XX_HASH3_MAC3_TO_MASK GENMASK(10, 5) +#define VSC73XX_HASH3_MAC4_TO_MASK GENMASK(4, 0) +#define VSC73XX_HASH4_MAC4_TO_MASK GENMASK(10, 8) + +#define VSC73XX_MACTINDX_SHADOW BIT(13) +#define VSC73XX_MACTINDX_BUCKET_MSK GENMASK(12, 11) +#define VSC73XX_MACTINDX_INDEX_MSK GENMASK(10, 0) + #define VSC73XX_MACACCESS_CPU_COPY BIT(14) #define VSC73XX_MACACCESS_FWD_KILL BIT(13) #define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12) @@ -184,16 +254,37 @@ #define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29) #define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28) #define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2) -#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0) +#define VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT 2 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(1, 0) #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2 #define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3 /* MII block 3 registers */ -#define VSC73XX_MII_STAT 0x0 -#define VSC73XX_MII_CMD 0x1 -#define VSC73XX_MII_DATA 0x2 +#define VSC73XX_MII_STAT 0x0 +#define VSC73XX_MII_CMD 0x1 +#define VSC73XX_MII_DATA 0x2 +#define VSC73XX_MII_MPRES 0x3 + +#define VSC73XX_MII_STAT_BUSY BIT(3) +#define VSC73XX_MII_STAT_READ BIT(2) +#define VSC73XX_MII_STAT_WRITE BIT(1) + +#define VSC73XX_MII_CMD_SCAN BIT(27) +#define VSC73XX_MII_CMD_OPERATION BIT(26) +#define VSC73XX_MII_CMD_PHY_ADDR GENMASK(25, 21) +#define VSC73XX_MII_CMD_PHY_REG GENMASK(20, 16) +#define VSC73XX_MII_CMD_WRITE_DATA GENMASK(15, 0) + +#define VSC73XX_MII_DATA_FAILURE BIT(16) +#define VSC73XX_MII_DATA_READ_DATA GENMASK(15, 0) + +#define VSC73XX_MII_MPRES_NOPREAMBLE BIT(6) +#define VSC73XX_MII_MPRES_PRESCALEVAL GENMASK(5, 0) +#define VSC73XX_MII_PRESCALEVAL_MIN 3 /* min allowed mdio clock prescaler */ + +#define VSC73XX_MII_STAT_BUSY BIT(3) /* Arbiter block 5 registers */ #define VSC73XX_ARBEMPTY 0x0c @@ -268,11 +359,22 @@ #define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398) #define IS_739X(a) (IS_7395(a) || IS_7398(a)) +#define VSC73XX_POLL_SLEEP_US 1000 +#define VSC73XX_MDIO_POLL_SLEEP_US 5 +#define VSC73XX_POLL_TIMEOUT_US 10000 + struct vsc73xx_counter { u8 counter; const char *name; }; +struct vsc73xx_fdb { + u16 vid; + u8 port; + u8 mac[ETH_ALEN]; + bool valid; +}; + /* Counters are named according to the MIB standards where applicable. * Some counters are custom, non-standard. The standard counters are * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex @@ -339,6 +441,17 @@ static const struct vsc73xx_counter vsc73xx_tx_counters[] = { { 29, "TxQoSClass3" }, /* non-standard counter */ }; +struct vsc73xx_vlan_summary { + size_t num_tagged; + size_t num_untagged; +}; + +enum vsc73xx_port_vlan_conf { + VSC73XX_VLAN_FILTER, + VSC73XX_VLAN_FILTER_UNTAG_ALL, + VSC73XX_VLAN_IGNORE, +}; + int vsc73xx_is_addr_valid(u8 block, u8 subblock) { switch (block) { @@ -359,13 +472,19 @@ int vsc73xx_is_addr_valid(u8 block, u8 subblock) break; case VSC73XX_BLOCK_MII: - case VSC73XX_BLOCK_CAPTURE: case VSC73XX_BLOCK_ARBITER: switch (subblock) { case 0 ... 1: return 1; } break; + case VSC73XX_BLOCK_CAPTURE: + switch (subblock) { + case 0 ... 4: + case 6 ... 7: + return 1; + } + break; } return 0; @@ -483,6 +602,22 @@ static int vsc73xx_detect(struct vsc73xx *vsc) return 0; } +static int vsc73xx_mdio_busy_check(struct vsc73xx *vsc) +{ + int ret, err; + u32 val; + + ret = read_poll_timeout(vsc73xx_read, err, + err < 0 || !(val & VSC73XX_MII_STAT_BUSY), + VSC73XX_MDIO_POLL_SLEEP_US, + VSC73XX_POLL_TIMEOUT_US, false, vsc, + VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_STAT, &val); + if (ret) + return ret; + return err; +} + static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) { struct vsc73xx *vsc = ds->priv; @@ -490,21 +625,33 @@ static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) u32 val; int ret; + ret = vsc73xx_mdio_busy_check(vsc); + if (ret) + return ret; + /* Setting bit 26 means "read" */ - cmd = BIT(26) | (phy << 21) | (regnum << 16); - ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + cmd = VSC73XX_MII_CMD_OPERATION | + FIELD_PREP(VSC73XX_MII_CMD_PHY_ADDR, phy) | + FIELD_PREP(VSC73XX_MII_CMD_PHY_REG, regnum); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_CMD, cmd); + if (ret) + return ret; + + ret = vsc73xx_mdio_busy_check(vsc); if (ret) return ret; - msleep(2); - ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_DATA, &val); if (ret) return ret; - if (val & BIT(16)) { + if (val & VSC73XX_MII_DATA_FAILURE) { dev_err(vsc->dev, "reading reg %02x from phy%d failed\n", regnum, phy); return -EIO; } - val &= 0xFFFFU; + val &= VSC73XX_MII_DATA_READ_DATA; dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n", regnum, phy, val); @@ -519,19 +666,15 @@ static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum, u32 cmd; int ret; - /* It was found through tedious experiments that this router - * chip really hates to have it's PHYs reset. They - * never recover if that happens: autonegotiation stops - * working after a reset. Just filter out this command. - * (Resetting the whole chip is OK.) - */ - if (regnum == 0 && (val & BIT(15))) { - dev_info(vsc->dev, "reset PHY - disallowed\n"); - return 0; - } + ret = vsc73xx_mdio_busy_check(vsc); + if (ret) + return ret; - cmd = (phy << 21) | (regnum << 16); - ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + cmd = FIELD_PREP(VSC73XX_MII_CMD_PHY_ADDR, phy) | + FIELD_PREP(VSC73XX_MII_CMD_PHY_REG, regnum) | + FIELD_PREP(VSC73XX_MII_CMD_WRITE_DATA, val); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_CMD, cmd); if (ret) return ret; @@ -553,16 +696,164 @@ static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds, * cannot access the tag. (See "Internal frame header" section * 3.9.1 in the manual.) */ - return DSA_TAG_PROTO_NONE; + return DSA_TAG_PROTO_VSC73XX_8021Q; +} + +static int vsc73xx_wait_for_vlan_table_cmd(struct vsc73xx *vsc) +{ + int ret, err; + u32 val; + + ret = read_poll_timeout(vsc73xx_read, err, + err < 0 || + ((val & VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK) == + VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE), + VSC73XX_POLL_SLEEP_US, VSC73XX_POLL_TIMEOUT_US, + false, vsc, VSC73XX_BLOCK_ANALYZER, + 0, VSC73XX_VLANACCESS, &val); + if (ret) + return ret; + return err; +} + +static int +vsc73xx_read_vlan_table_entry(struct vsc73xx *vsc, u16 vid, u8 *portmap) +{ + u32 val; + int ret; + + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid); + + ret = vsc73xx_wait_for_vlan_table_cmd(vsc); + if (ret) + return ret; + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY); + + ret = vsc73xx_wait_for_vlan_table_cmd(vsc); + if (ret) + return ret; + + vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, &val); + *portmap = (val & VSC73XX_VLANACCESS_VLAN_PORT_MASK) >> + VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT; + + return 0; +} + +static int +vsc73xx_write_vlan_table_entry(struct vsc73xx *vsc, u16 vid, u8 portmap) +{ + int ret; + + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANTIDX, vid); + + ret = vsc73xx_wait_for_vlan_table_cmd(vsc); + if (ret) + return ret; + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK | + VSC73XX_VLANACCESS_VLAN_SRC_CHECK | + VSC73XX_VLANACCESS_VLAN_PORT_MASK, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY | + VSC73XX_VLANACCESS_VLAN_SRC_CHECK | + (portmap << VSC73XX_VLANACCESS_VLAN_PORT_MASK_SHIFT)); + + return vsc73xx_wait_for_vlan_table_cmd(vsc); +} + +static int +vsc73xx_update_vlan_table(struct vsc73xx *vsc, int port, u16 vid, bool set) +{ + u8 portmap; + int ret; + + ret = vsc73xx_read_vlan_table_entry(vsc, vid, &portmap); + if (ret) + return ret; + + if (set) + portmap |= BIT(port); + else + portmap &= ~BIT(port); + + return vsc73xx_write_vlan_table_entry(vsc, vid, portmap); +} + +static int vsc73xx_configure_rgmii_port_delay(struct dsa_switch *ds) +{ + /* Keep 2.0 ns delay for backward complatibility */ + u32 tx_delay = VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS; + u32 rx_delay = VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS; + struct dsa_port *dp = dsa_to_port(ds, CPU_PORT); + struct device_node *port_dn = dp->dn; + struct vsc73xx *vsc = ds->priv; + u32 delay; + + if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) { + switch (delay) { + case 0: + tx_delay = VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE; + break; + case 1400: + tx_delay = VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS; + break; + case 1700: + tx_delay = VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS; + break; + case 2000: + break; + default: + dev_err(vsc->dev, + "Unsupported RGMII Transmit Clock Delay\n"); + return -EINVAL; + } + } else { + dev_dbg(vsc->dev, + "RGMII Transmit Clock Delay isn't configured, set to 2.0 ns\n"); + } + + if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) { + switch (delay) { + case 0: + rx_delay = VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE; + break; + case 1400: + rx_delay = VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS; + break; + case 1700: + rx_delay = VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS; + break; + case 2000: + break; + default: + dev_err(vsc->dev, + "Unsupported RGMII Receive Clock Delay value\n"); + return -EINVAL; + } + } else { + dev_dbg(vsc->dev, + "RGMII Receive Clock Delay isn't configured, set to 2.0 ns\n"); + } + + /* MII delay, set both GTX and RX delay */ + return vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY, + tx_delay | rx_delay); } static int vsc73xx_setup(struct dsa_switch *ds) { struct vsc73xx *vsc = ds->priv; - int i; + int i, ret, val; dev_info(vsc->dev, "set up the switch\n"); + ds->max_num_bridges = DSA_TAG_8021Q_MAX_NUM_BRIDGES; + ds->fdb_isolation = true; + /* Issue RESET */ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, VSC73XX_GLORESET_MASTER_RESET); @@ -590,7 +881,7 @@ static int vsc73xx_setup(struct dsa_switch *ds) VSC73XX_MACACCESS, VSC73XX_MACACCESS_CMD_CLEAR_TABLE); - /* Clear VLAN table */ + /* Set VLAN table to default values */ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANACCESS, VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE); @@ -615,26 +906,53 @@ static int vsc73xx_setup(struct dsa_switch *ds) VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET); } - /* MII delay, set both GTX and RX delay to 2 ns */ - vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY, - VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS | - VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS); - /* Enable reception of frames on all ports */ - vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK, - 0x5f); + /* Configure RGMII delay */ + ret = vsc73xx_configure_rgmii_port_delay(ds); + if (ret) + return ret; + + /* Ingess VLAN reception mask (table 145) */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_VLANMASK, + 0xff); /* IP multicast flood mask (table 144) */ vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK, 0xff); mdelay(50); + /* Disable preamble and use maximum allowed clock for the internal + * mdio bus, used for communication with internal PHYs only. + */ + val = VSC73XX_MII_MPRES_NOPREAMBLE | + FIELD_PREP(VSC73XX_MII_MPRES_PRESCALEVAL, + VSC73XX_MII_PRESCALEVAL_MIN); + vsc73xx_write(vsc, VSC73XX_BLOCK_MII, VSC73XX_BLOCK_MII_INTERNAL, + VSC73XX_MII_MPRES, val); + /* Release reset from the internal PHYs */ vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, VSC73XX_GLORESET_PHY_RESET); udelay(4); - return 0; + /* Clear VLAN table */ + for (i = 0; i < VLAN_N_VID; i++) + vsc73xx_write_vlan_table_entry(vsc, i, 0); + + INIT_LIST_HEAD(&vsc->vlans); + + rtnl_lock(); + ret = dsa_tag_8021q_register(ds, htons(ETH_P_8021Q)); + rtnl_unlock(); + + return ret; +} + +static void vsc73xx_teardown(struct dsa_switch *ds) +{ + rtnl_lock(); + dsa_tag_8021q_unregister(ds); + rtnl_unlock(); } static void vsc73xx_init_port(struct vsc73xx *vsc, int port) @@ -713,22 +1031,123 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port) port, VSC73XX_C_RX0, 0); } -static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc, - int port, struct phy_device *phydev, - u32 initval) +static void vsc73xx_reset_port(struct vsc73xx *vsc, int port, u32 initval) { - u32 val = initval; + int ret, err; + u32 val; + + /* Disable RX on this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RX_EN, 0); + + /* Discard packets */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), BIT(port)); + + /* Wait until queue is empty */ + ret = read_poll_timeout(vsc73xx_read, err, + err < 0 || (val & BIT(port)), + VSC73XX_POLL_SLEEP_US, + VSC73XX_POLL_TIMEOUT_US, false, + vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBEMPTY, &val); + if (ret) + dev_err(vsc->dev, + "timeout waiting for block arbiter\n"); + else if (err < 0) + dev_err(vsc->dev, "error reading arbiter\n"); + + /* Put this port into reset */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET | initval); +} + +static void vsc73xx_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct vsc73xx *vsc = dp->ds->priv; + int port = dp->index; + + /* Special handling of the CPU-facing port */ + if (port == CPU_PORT) { + /* Other ports are already initialized but not this one */ + vsc73xx_init_port(vsc, CPU_PORT); + /* Select the external port for this interface (EXT_PORT) + * Enable the GMII GTX external clock + * Use double data rate (DDR mode) + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + CPU_PORT, + VSC73XX_ADVPORTM, + VSC73XX_ADVPORTM_EXT_PORT | + VSC73XX_ADVPORTM_ENA_GTX | + VSC73XX_ADVPORTM_DDR_MODE); + } +} + +static void vsc73xx_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct vsc73xx *vsc = dp->ds->priv; + int port = dp->index; + + /* This routine is described in the datasheet (below ARBDISC register + * description) + */ + vsc73xx_reset_port(vsc, port, 0); + + /* Allow backward dropping of frames from this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_SBACKWDROP, BIT(port), BIT(port)); +} + +static void vsc73xx_mac_link_up(struct phylink_config *config, + struct phy_device *phy, unsigned int mode, + phy_interface_t interface, int speed, + int duplex, bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct vsc73xx *vsc = dp->ds->priv; + int port = dp->index; + u32 val; u8 seed; - /* Reset this port FIXME: break out subroutine */ - val |= VSC73XX_MAC_CFG_RESET; - vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); + if (speed == SPEED_1000) + val = VSC73XX_MAC_CFG_GIGA_MODE | VSC73XX_MAC_CFG_TX_IPG_1000M; + else + val = VSC73XX_MAC_CFG_TX_IPG_100_10M; + + if (phy_interface_mode_is_rgmii(interface)) + val |= VSC73XX_MAC_CFG_CLK_SEL_1000M; + else + val |= VSC73XX_MAC_CFG_CLK_SEL_EXT; + + if (duplex == DUPLEX_FULL) + val |= VSC73XX_MAC_CFG_FDX; + else + /* In datasheet description ("Port Mode Procedure" in 5.6.2) + * this bit is configured only for half duplex. + */ + val |= VSC73XX_MAC_CFG_WEXC_DIS; + + /* This routine is described in the datasheet (below ARBDISC register + * description) + */ + vsc73xx_reset_port(vsc, port, val); /* Seed the port randomness with randomness */ get_random_bytes(&seed, 1); val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET; val |= VSC73XX_MAC_CFG_SEED_LOAD; - val |= VSC73XX_MAC_CFG_WEXC_DIS; + + /* Those bits are responsible for MTU only. Kernel takes care about MTU, + * let's enable +8 bytes frame length unconditionally. + */ + val |= VSC73XX_MAC_CFG_VLAN_AWR | VSC73XX_MAC_CFG_VLAN_DBLAWR; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); /* Flow control for the PHY facing ports: @@ -741,6 +1160,10 @@ static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc, VSC73XX_FCCONF_FLOW_CTRL_OBEY | 0xff); + /* Accept packets again */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), 0); + /* Disallow backward dropping of frames from this port */ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, VSC73XX_SBACKWDROP, BIT(port), 0); @@ -753,125 +1176,255 @@ static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc, VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN); } -static void vsc73xx_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) +static bool vsc73xx_tag_8021q_active(struct dsa_port *dp) { - struct vsc73xx *vsc = ds->priv; - u32 val; + return !dsa_port_is_vlan_filtering(dp); +} - /* Special handling of the CPU-facing port */ - if (port == CPU_PORT) { - /* Other ports are already initialized but not this one */ - vsc73xx_init_port(vsc, CPU_PORT); - /* Select the external port for this interface (EXT_PORT) - * Enable the GMII GTX external clock - * Use double data rate (DDR mode) - */ - vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, - CPU_PORT, - VSC73XX_ADVPORTM, - VSC73XX_ADVPORTM_EXT_PORT | - VSC73XX_ADVPORTM_ENA_GTX | - VSC73XX_ADVPORTM_DDR_MODE); +static struct vsc73xx_bridge_vlan * +vsc73xx_bridge_vlan_find(struct vsc73xx *vsc, u16 vid) +{ + struct vsc73xx_bridge_vlan *vlan; + + list_for_each_entry(vlan, &vsc->vlans, list) + if (vlan->vid == vid) + return vlan; + + return NULL; +} + +static void +vsc73xx_bridge_vlan_remove_port(struct vsc73xx_bridge_vlan *vsc73xx_vlan, + int port) +{ + vsc73xx_vlan->portmask &= ~BIT(port); + + if (vsc73xx_vlan->portmask) + return; + + list_del(&vsc73xx_vlan->list); + kfree(vsc73xx_vlan); +} + +static void vsc73xx_bridge_vlan_summary(struct vsc73xx *vsc, int port, + struct vsc73xx_vlan_summary *summary, + u16 ignored_vid) +{ + size_t num_tagged = 0, num_untagged = 0; + struct vsc73xx_bridge_vlan *vlan; + + list_for_each_entry(vlan, &vsc->vlans, list) { + if (!(vlan->portmask & BIT(port)) || vlan->vid == ignored_vid) + continue; + + if (vlan->untagged & BIT(port)) + num_untagged++; + else + num_tagged++; } - /* This is the MAC confiuration that always need to happen - * after a PHY or the CPU port comes up or down. - */ - if (!phydev->link) { - int maxloop = 10; - - dev_dbg(vsc->dev, "port %d: went down\n", - port); - - /* Disable RX on this port */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, - VSC73XX_MAC_CFG, - VSC73XX_MAC_CFG_RX_EN, 0); - - /* Discard packets */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, - VSC73XX_ARBDISC, BIT(port), BIT(port)); - - /* Wait until queue is empty */ - vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, - VSC73XX_ARBEMPTY, &val); - while (!(val & BIT(port))) { - msleep(1); - vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, - VSC73XX_ARBEMPTY, &val); - if (--maxloop == 0) { - dev_err(vsc->dev, - "timeout waiting for block arbiter\n"); - /* Continue anyway */ - break; - } - } + summary->num_untagged = num_untagged; + summary->num_tagged = num_tagged; +} + +static u16 vsc73xx_find_first_vlan_untagged(struct vsc73xx *vsc, int port) +{ + struct vsc73xx_bridge_vlan *vlan; - /* Put this port into reset */ - vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, - VSC73XX_MAC_CFG_RESET); + list_for_each_entry(vlan, &vsc->vlans, list) + if ((vlan->portmask & BIT(port)) && + (vlan->untagged & BIT(port))) + return vlan->vid; - /* Accept packets again */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, - VSC73XX_ARBDISC, BIT(port), 0); + return VLAN_N_VID; +} - /* Allow backward dropping of frames from this port */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, - VSC73XX_SBACKWDROP, BIT(port), BIT(port)); +static int vsc73xx_set_vlan_conf(struct vsc73xx *vsc, int port, + enum vsc73xx_port_vlan_conf port_vlan_conf) +{ + u32 val = 0; + int ret; - /* Receive mask (disable forwarding) */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, - VSC73XX_RECVMASK, BIT(port), 0); + if (port_vlan_conf == VSC73XX_VLAN_IGNORE) + val = VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA | + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA; - return; + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_CAT_VLAN_MISC, + VSC73XX_CAT_VLAN_MISC_VLAN_TCI_IGNORE_ENA | + VSC73XX_CAT_VLAN_MISC_VLAN_KEEP_TAG_ENA, val); + if (ret) + return ret; + + val = (port_vlan_conf == VSC73XX_VLAN_FILTER) ? + VSC73XX_TXUPDCFG_TX_INSERT_TAG : 0; + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_TXUPDCFG, + VSC73XX_TXUPDCFG_TX_INSERT_TAG, val); +} + +/** + * vsc73xx_vlan_commit_conf - Update VLAN configuration of a port + * @vsc: Switch private data structure + * @port: Port index on which to operate + * + * Update the VLAN behavior of a port to make sure that when it is under + * a VLAN filtering bridge, the port is either filtering with tag + * preservation, or filtering with all VLANs egress-untagged. Otherwise, + * the port ignores VLAN tags from packets and applies the port-based + * VID. + * + * Must be called when changes are made to: + * - the bridge VLAN filtering state of the port + * - the number or attributes of VLANs from the bridge VLAN table, + * while the port is currently VLAN-aware + * + * Return: 0 on success, or negative errno on error. + */ +static int vsc73xx_vlan_commit_conf(struct vsc73xx *vsc, int port) +{ + enum vsc73xx_port_vlan_conf port_vlan_conf = VSC73XX_VLAN_IGNORE; + struct dsa_port *dp = dsa_to_port(vsc->ds, port); + + if (port == CPU_PORT) { + port_vlan_conf = VSC73XX_VLAN_FILTER; + } else if (dsa_port_is_vlan_filtering(dp)) { + struct vsc73xx_vlan_summary summary; + + port_vlan_conf = VSC73XX_VLAN_FILTER; + + vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID); + if (summary.num_tagged == 0) + port_vlan_conf = VSC73XX_VLAN_FILTER_UNTAG_ALL; } - /* Figure out what speed was negotiated */ - if (phydev->speed == SPEED_1000) { - dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n", - port); + return vsc73xx_set_vlan_conf(vsc, port, port_vlan_conf); +} - /* Set up default for internal port or external RGMII */ - if (phydev->interface == PHY_INTERFACE_MODE_RGMII) - val = VSC73XX_MAC_CFG_1000M_F_RGMII; - else - val = VSC73XX_MAC_CFG_1000M_F_PHY; - vsc73xx_adjust_enable_port(vsc, port, phydev, val); - } else if (phydev->speed == SPEED_100) { - if (phydev->duplex == DUPLEX_FULL) { - val = VSC73XX_MAC_CFG_100_10M_F_PHY; - dev_dbg(vsc->dev, - "port %d: 100 Mbit full duplex mode\n", - port); - } else { - val = VSC73XX_MAC_CFG_100_10M_H_PHY; - dev_dbg(vsc->dev, - "port %d: 100 Mbit half duplex mode\n", - port); - } - vsc73xx_adjust_enable_port(vsc, port, phydev, val); - } else if (phydev->speed == SPEED_10) { - if (phydev->duplex == DUPLEX_FULL) { - val = VSC73XX_MAC_CFG_100_10M_F_PHY; - dev_dbg(vsc->dev, - "port %d: 10 Mbit full duplex mode\n", - port); - } else { - val = VSC73XX_MAC_CFG_100_10M_H_PHY; - dev_dbg(vsc->dev, - "port %d: 10 Mbit half duplex mode\n", - port); - } - vsc73xx_adjust_enable_port(vsc, port, phydev, val); - } else { - dev_err(vsc->dev, - "could not adjust link: unknown speed\n"); +static int +vsc73xx_vlan_change_untagged(struct vsc73xx *vsc, int port, u16 vid, bool set) +{ + u32 val = 0; + + if (set) + val = VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA | + ((vid << VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_SHIFT) & + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID); + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_TXUPDCFG, + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID_ENA | + VSC73XX_TXUPDCFG_TX_UNTAGGED_VID, val); +} + +/** + * vsc73xx_vlan_commit_untagged - Update native VLAN of a port + * @vsc: Switch private data structure + * @port: Port index on which to operate + * + * Update the native VLAN of a port (the one VLAN which is transmitted + * as egress-tagged on a trunk port) when port is in VLAN filtering mode and + * only one untagged vid is configured. + * In other cases no need to configure it because switch can untag all vlans on + * the port. + * + * Return: 0 on success, or negative errno on error. + */ +static int vsc73xx_vlan_commit_untagged(struct vsc73xx *vsc, int port) +{ + struct dsa_port *dp = dsa_to_port(vsc->ds, port); + struct vsc73xx_vlan_summary summary; + u16 vid = 0; + bool valid; + + if (!dsa_port_is_vlan_filtering(dp)) + /* Port is configured to untag all vlans in that case. + * No need to commit untagged config change. + */ + return 0; + + vsc73xx_bridge_vlan_summary(vsc, port, &summary, VLAN_N_VID); + + if (summary.num_untagged > 1) + /* Port must untag all vlans in that case. + * No need to commit untagged config change. + */ + return 0; + + valid = (summary.num_untagged == 1); + if (valid) + vid = vsc73xx_find_first_vlan_untagged(vsc, port); + + return vsc73xx_vlan_change_untagged(vsc, port, vid, valid); +} + +static int +vsc73xx_vlan_change_pvid(struct vsc73xx *vsc, int port, u16 vid, bool set) +{ + u32 val = 0; + int ret; + + val = set ? 0 : VSC73XX_CAT_DROP_UNTAGGED_ENA; + + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_CAT_DROP, + VSC73XX_CAT_DROP_UNTAGGED_ENA, val); + if (!set || ret) + return ret; + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_CAT_PORT_VLAN, + VSC73XX_CAT_PORT_VLAN_VLAN_VID, + vid & VSC73XX_CAT_PORT_VLAN_VLAN_VID); +} + +/** + * vsc73xx_vlan_commit_pvid - Update port-based default VLAN of a port + * @vsc: Switch private data structure + * @port: Port index on which to operate + * + * Update the PVID of a port so that it follows either the bridge PVID + * configuration, when the bridge is currently VLAN-aware, or the PVID + * from tag_8021q, when the port is standalone or under a VLAN-unaware + * bridge. A port with no PVID drops all untagged and VID 0 tagged + * traffic. + * + * Must be called when changes are made to: + * - the bridge VLAN filtering state of the port + * - the number or attributes of VLANs from the bridge VLAN table, + * while the port is currently VLAN-aware + * + * Return: 0 on success, or negative errno on error. + */ +static int vsc73xx_vlan_commit_pvid(struct vsc73xx *vsc, int port) +{ + struct vsc73xx_portinfo *portinfo = &vsc->portinfo[port]; + bool valid = portinfo->pvid_tag_8021q_configured; + struct dsa_port *dp = dsa_to_port(vsc->ds, port); + u16 vid = portinfo->pvid_tag_8021q; + + if (dsa_port_is_vlan_filtering(dp)) { + vid = portinfo->pvid_vlan_filtering; + valid = portinfo->pvid_vlan_filtering_configured; } - /* Enable port (forwarding) in the receieve mask */ - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, - VSC73XX_RECVMASK, BIT(port), BIT(port)); + return vsc73xx_vlan_change_pvid(vsc, port, vid, valid); +} + +static int vsc73xx_vlan_commit_settings(struct vsc73xx *vsc, int port) +{ + int ret; + + ret = vsc73xx_vlan_commit_untagged(vsc, port); + if (ret) + return ret; + + ret = vsc73xx_vlan_commit_pvid(vsc, port); + if (ret) + return ret; + + return vsc73xx_vlan_commit_conf(vsc, port); } static int vsc73xx_port_enable(struct dsa_switch *ds, int port, @@ -882,7 +1435,7 @@ static int vsc73xx_port_enable(struct dsa_switch *ds, int port, dev_info(vsc->dev, "enable port %d\n", port); vsc73xx_init_port(vsc, port); - return 0; + return vsc73xx_vlan_commit_settings(vsc, port); } static void vsc73xx_port_disable(struct dsa_switch *ds, int port) @@ -928,7 +1481,8 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset, const struct vsc73xx_counter *cnt; struct vsc73xx *vsc = ds->priv; u8 indices[6]; - int i, j; + u8 *buf = data; + int i; u32 val; int ret; @@ -948,10 +1502,7 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset, indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */ /* The first counters is the RX octets */ - j = 0; - strncpy(data + j * ETH_GSTRING_LEN, - "RxEtherStatsOctets", ETH_GSTRING_LEN); - j++; + ethtool_puts(&buf, "RxEtherStatsOctets"); /* Each port supports recording 3 RX counters and 3 TX counters, * figure out what counters we use in this set-up and return the @@ -961,23 +1512,16 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset, */ for (i = 0; i < 3; i++) { cnt = vsc73xx_find_counter(vsc, indices[i], false); - if (cnt) - strncpy(data + j * ETH_GSTRING_LEN, - cnt->name, ETH_GSTRING_LEN); - j++; + ethtool_puts(&buf, cnt ? cnt->name : ""); } /* TX stats begins with the number of TX octets */ - strncpy(data + j * ETH_GSTRING_LEN, - "TxEtherStatsOctets", ETH_GSTRING_LEN); - j++; + ethtool_puts(&buf, "TxEtherStatsOctets"); for (i = 3; i < 6; i++) { cnt = vsc73xx_find_counter(vsc, indices[i], true); - if (cnt) - strncpy(data + j * ETH_GSTRING_LEN, - cnt->name, ETH_GSTRING_LEN); - j++; + ethtool_puts(&buf, cnt ? cnt->name : ""); + } } @@ -1037,19 +1581,667 @@ static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port) return 9600 - ETH_HLEN - ETH_FCS_LEN; } +static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port, + struct phylink_config *config) +{ + unsigned long *interfaces = config->supported_interfaces; + + if (port == 5) + return; + + if (port == CPU_PORT) { + __set_bit(PHY_INTERFACE_MODE_MII, interfaces); + __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, interfaces); + __set_bit(PHY_INTERFACE_MODE_RGMII, interfaces); + } + + if (port <= 4) { + /* Internal PHYs */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces); + /* phylib default */ + __set_bit(PHY_INTERFACE_MODE_GMII, interfaces); + } + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000; +} + +static int +vsc73xx_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, struct netlink_ext_ack *extack) +{ + struct vsc73xx *vsc = ds->priv; + + /* The commit to hardware processed below is required because vsc73xx + * is using tag_8021q. When vlan_filtering is disabled, tag_8021q uses + * pvid/untagged vlans for port recognition. The values configured for + * vlans and pvid/untagged states are stored in portinfo structure. + * When vlan_filtering is enabled, we need to restore pvid/untagged from + * portinfo structure. Analogous routine is processed when + * vlan_filtering is disabled, but values used for tag_8021q are + * restored. + */ + + return vsc73xx_vlan_commit_settings(vsc, port); +} + +static int vsc73xx_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + struct dsa_port *dp = dsa_to_port(ds, port); + struct vsc73xx_bridge_vlan *vsc73xx_vlan; + struct vsc73xx_vlan_summary summary; + struct vsc73xx_portinfo *portinfo; + struct vsc73xx *vsc = ds->priv; + bool commit_to_hardware; + int ret = 0; + + /* Be sure to deny alterations to the configuration done by tag_8021q. + */ + if (vid_is_dsa_8021q(vlan->vid)) { + NL_SET_ERR_MSG_MOD(extack, + "Range 3072-4095 reserved for dsa_8021q operation"); + return -EBUSY; + } + + /* The processed vlan->vid is excluded from the search because the VLAN + * can be re-added with a different set of flags, so it's easiest to + * ignore its old flags from the VLAN database software copy. + */ + vsc73xx_bridge_vlan_summary(vsc, port, &summary, vlan->vid); + + /* VSC73XX allows only three untagged states: none, one or all */ + if ((untagged && summary.num_tagged > 0 && summary.num_untagged > 0) || + (!untagged && summary.num_untagged > 1)) { + NL_SET_ERR_MSG_MOD(extack, + "Port can have only none, one or all untagged vlan"); + return -EBUSY; + } + + vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid); + + if (!vsc73xx_vlan) { + vsc73xx_vlan = kzalloc(sizeof(*vsc73xx_vlan), GFP_KERNEL); + if (!vsc73xx_vlan) + return -ENOMEM; + + vsc73xx_vlan->vid = vlan->vid; + + list_add_tail(&vsc73xx_vlan->list, &vsc->vlans); + } + + vsc73xx_vlan->portmask |= BIT(port); + + /* CPU port must be always tagged because source port identification is + * based on tag_8021q. + */ + if (port == CPU_PORT) + goto update_vlan_table; + + if (untagged) + vsc73xx_vlan->untagged |= BIT(port); + else + vsc73xx_vlan->untagged &= ~BIT(port); + + portinfo = &vsc->portinfo[port]; + + if (pvid) { + portinfo->pvid_vlan_filtering_configured = true; + portinfo->pvid_vlan_filtering = vlan->vid; + } else if (portinfo->pvid_vlan_filtering_configured && + portinfo->pvid_vlan_filtering == vlan->vid) { + portinfo->pvid_vlan_filtering_configured = false; + } + + commit_to_hardware = !vsc73xx_tag_8021q_active(dp); + if (commit_to_hardware) { + ret = vsc73xx_vlan_commit_settings(vsc, port); + if (ret) + goto err; + } + +update_vlan_table: + ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, true); + if (!ret) + return 0; +err: + vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port); + return ret; +} + +static int vsc73xx_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct vsc73xx_bridge_vlan *vsc73xx_vlan; + struct vsc73xx_portinfo *portinfo; + struct vsc73xx *vsc = ds->priv; + bool commit_to_hardware; + int ret; + + ret = vsc73xx_update_vlan_table(vsc, port, vlan->vid, false); + if (ret) + return ret; + + portinfo = &vsc->portinfo[port]; + + if (portinfo->pvid_vlan_filtering_configured && + portinfo->pvid_vlan_filtering == vlan->vid) + portinfo->pvid_vlan_filtering_configured = false; + + vsc73xx_vlan = vsc73xx_bridge_vlan_find(vsc, vlan->vid); + + if (vsc73xx_vlan) + vsc73xx_bridge_vlan_remove_port(vsc73xx_vlan, port); + + commit_to_hardware = !vsc73xx_tag_8021q_active(dsa_to_port(ds, port)); + + if (commit_to_hardware) + return vsc73xx_vlan_commit_settings(vsc, port); + + return 0; +} + +static int vsc73xx_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid, + u16 flags) +{ + bool pvid = flags & BRIDGE_VLAN_INFO_PVID; + struct vsc73xx_portinfo *portinfo; + struct vsc73xx *vsc = ds->priv; + bool commit_to_hardware; + int ret; + + portinfo = &vsc->portinfo[port]; + + if (pvid) { + portinfo->pvid_tag_8021q_configured = true; + portinfo->pvid_tag_8021q = vid; + } + + commit_to_hardware = vsc73xx_tag_8021q_active(dsa_to_port(ds, port)); + if (commit_to_hardware) { + ret = vsc73xx_vlan_commit_settings(vsc, port); + if (ret) + return ret; + } + + return vsc73xx_update_vlan_table(vsc, port, vid, true); +} + +static int vsc73xx_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid) +{ + struct vsc73xx_portinfo *portinfo; + struct vsc73xx *vsc = ds->priv; + + portinfo = &vsc->portinfo[port]; + + if (portinfo->pvid_tag_8021q_configured && + portinfo->pvid_tag_8021q == vid) { + struct dsa_port *dp = dsa_to_port(ds, port); + bool commit_to_hardware; + int err; + + portinfo->pvid_tag_8021q_configured = false; + + commit_to_hardware = vsc73xx_tag_8021q_active(dp); + if (commit_to_hardware) { + err = vsc73xx_vlan_commit_settings(vsc, port); + if (err) + return err; + } + } + + return vsc73xx_update_vlan_table(vsc, port, vid, false); +} + +static int vsc73xx_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~BR_LEARNING) + return -EINVAL; + + return 0; +} + +static int vsc73xx_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & BR_LEARNING) { + u32 val = flags.val & BR_LEARNING ? BIT(port) : 0; + struct vsc73xx *vsc = ds->priv; + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_LEARNMASK, BIT(port), val); + } + + return 0; +} + +static void vsc73xx_refresh_fwd_map(struct dsa_switch *ds, int port, u8 state) +{ + struct dsa_port *other_dp, *dp = dsa_to_port(ds, port); + struct vsc73xx *vsc = ds->priv; + u16 mask; + + if (state != BR_STATE_FORWARDING) { + /* Ports that aren't in the forwarding state must not + * forward packets anywhere. + */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + port, + VSC73XX_SRCMASKS_PORTS_MASK, 0); + + dsa_switch_for_each_available_port(other_dp, ds) { + if (other_dp == dp) + continue; + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + other_dp->index, + BIT(port), 0); + } + + return; + } + + /* Forwarding ports must forward to the CPU and to other ports + * in the same bridge + */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + CPU_PORT, BIT(port), BIT(port)); + + mask = BIT(CPU_PORT); + + dsa_switch_for_each_user_port(other_dp, ds) { + int other_port = other_dp->index; + + if (port == other_port || !dsa_port_bridge_same(dp, other_dp) || + other_dp->stp_state != BR_STATE_FORWARDING) + continue; + + mask |= BIT(other_port); + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + other_port, + BIT(port), BIT(port)); + } + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_SRCMASKS + port, + VSC73XX_SRCMASKS_PORTS_MASK, mask); +} + +/* FIXME: STP frames aren't forwarded at this moment. BPDU frames are + * forwarded only from and to PI/SI interface. For more info see chapter + * 2.7.1 (CPU Forwarding) in datasheet. + * This function is required for tag_8021q operations. + */ +static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port, + u8 state) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct vsc73xx *vsc = ds->priv; + u32 val = 0; + + if (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING) + val = dp->learning ? BIT(port) : 0; + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_LEARNMASK, BIT(port), val); + + val = (state == BR_STATE_BLOCKING || state == BR_STATE_DISABLED) ? + 0 : BIT(port); + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), val); + + /* CPU Port should always forward packets when user ports are forwarding + * so let's configure it from other ports only. + */ + if (port != CPU_PORT) + vsc73xx_refresh_fwd_map(ds, port, state); +} + +static u16 vsc73xx_calc_hash(const unsigned char *addr, u16 vid) +{ + /* VID 5-0, MAC 47-44 */ + u16 hash = FIELD_PREP(VSC73XX_HASH0_VID_TO_MASK, + FIELD_GET(VSC73XX_HASH0_VID_FROM_MASK, vid)) | + FIELD_PREP(VSC73XX_HASH0_MAC0_TO_MASK, + FIELD_GET(VSC73XX_HASH0_MAC0_FROM_MASK, addr[0])); + /* MAC 43-33 */ + hash ^= FIELD_PREP(VSC73XX_HASH1_MAC0_TO_MASK, + FIELD_GET(VSC73XX_HASH1_MAC0_FROM_MASK, addr[0])) | + FIELD_PREP(VSC73XX_HASH1_MAC1_TO_MASK, + FIELD_GET(VSC73XX_HASH1_MAC1_FROM_MASK, addr[1])); + /* MAC 32-22 */ + hash ^= FIELD_PREP(VSC73XX_HASH2_MAC1_TO_MASK, + FIELD_GET(VSC73XX_HASH2_MAC1_FROM_MASK, addr[1])) | + FIELD_PREP(VSC73XX_HASH2_MAC2_TO_MASK, + FIELD_GET(VSC73XX_HASH2_MAC2_FROM_MASK, addr[2])) | + FIELD_PREP(VSC73XX_HASH2_MAC3_TO_MASK, + FIELD_GET(VSC73XX_HASH2_MAC3_FROM_MASK, addr[3])); + /* MAC 21-11 */ + hash ^= FIELD_PREP(VSC73XX_HASH3_MAC3_TO_MASK, + FIELD_GET(VSC73XX_HASH3_MAC3_FROM_MASK, addr[3])) | + FIELD_PREP(VSC73XX_HASH3_MAC4_TO_MASK, + FIELD_GET(VSC73XX_HASH3_MAC4_FROM_MASK, addr[4])); + /* MAC 10-0 */ + hash ^= FIELD_PREP(VSC73XX_HASH4_MAC4_TO_MASK, + FIELD_GET(VSC73XX_HASH4_MAC4_FROM_MASK, addr[4])) | + addr[5]; + + return hash; +} + +static int +vsc73xx_port_wait_for_mac_table_cmd(struct vsc73xx *vsc) +{ + int ret, err; + u32 val; + + ret = read_poll_timeout(vsc73xx_read, err, + err < 0 || + ((val & VSC73XX_MACACCESS_CMD_MASK) == + VSC73XX_MACACCESS_CMD_IDLE), + VSC73XX_POLL_SLEEP_US, VSC73XX_POLL_TIMEOUT_US, + false, vsc, VSC73XX_BLOCK_ANALYZER, + 0, VSC73XX_MACACCESS, &val); + if (ret) + return ret; + return err; +} + +static int vsc73xx_port_read_mac_table_row(struct vsc73xx *vsc, u16 index, + struct vsc73xx_fdb *fdb) +{ + int ret, i; + u32 val; + + if (!fdb) + return -EINVAL; + if (index >= VSC73XX_NUM_FDB_ROWS) + return -EINVAL; + + for (i = 0; i < VSC73XX_NUM_BUCKETS; i++) { + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACTINDX, + (i ? 0 : VSC73XX_MACTINDX_SHADOW) | + FIELD_PREP(VSC73XX_MACTINDX_BUCKET_MSK, i) | + index); + if (ret) + return ret; + + ret = vsc73xx_port_wait_for_mac_table_cmd(vsc); + if (ret) + return ret; + + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACACCESS, + VSC73XX_MACACCESS_CMD_MASK, + VSC73XX_MACACCESS_CMD_READ_ENTRY); + if (ret) + return ret; + + ret = vsc73xx_port_wait_for_mac_table_cmd(vsc); + if (ret) + return ret; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACACCESS, &val); + if (ret) + return ret; + + fdb[i].valid = FIELD_GET(VSC73XX_MACACCESS_VALID, val); + if (!fdb[i].valid) + continue; + + fdb[i].port = FIELD_GET(VSC73XX_MACACCESS_DEST_IDX_MASK, val); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACHDATA, &val); + if (ret) + return ret; + + fdb[i].vid = FIELD_GET(VSC73XX_MACHDATA_VID, val); + fdb[i].mac[0] = FIELD_GET(VSC73XX_MACHDATA_MAC0, val); + fdb[i].mac[1] = FIELD_GET(VSC73XX_MACHDATA_MAC1, val); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACLDATA, &val); + if (ret) + return ret; + + fdb[i].mac[2] = FIELD_GET(VSC73XX_MACLDATA_MAC2, val); + fdb[i].mac[3] = FIELD_GET(VSC73XX_MACLDATA_MAC3, val); + fdb[i].mac[4] = FIELD_GET(VSC73XX_MACLDATA_MAC4, val); + fdb[i].mac[5] = FIELD_GET(VSC73XX_MACLDATA_MAC5, val); + } + + return ret; +} + +static int +vsc73xx_fdb_operation(struct vsc73xx *vsc, const unsigned char *addr, u16 vid, + u16 hash, u16 cmd_mask, u16 cmd_val) +{ + int ret; + u32 val; + + val = FIELD_PREP(VSC73XX_MACHDATA_VID, vid) | + FIELD_PREP(VSC73XX_MACHDATA_MAC0, addr[0]) | + FIELD_PREP(VSC73XX_MACHDATA_MAC1, addr[1]); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_MACHDATA, + val); + if (ret) + return ret; + + val = FIELD_PREP(VSC73XX_MACLDATA_MAC2, addr[2]) | + FIELD_PREP(VSC73XX_MACLDATA_MAC3, addr[3]) | + FIELD_PREP(VSC73XX_MACLDATA_MAC4, addr[4]) | + FIELD_PREP(VSC73XX_MACLDATA_MAC5, addr[5]); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_MACLDATA, + val); + if (ret) + return ret; + + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_MACTINDX, + hash); + if (ret) + return ret; + + ret = vsc73xx_port_wait_for_mac_table_cmd(vsc); + if (ret) + return ret; + + ret = vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACACCESS, cmd_mask, cmd_val); + if (ret) + return ret; + + return vsc73xx_port_wait_for_mac_table_cmd(vsc); +} + +static int vsc73xx_fdb_del_entry(struct vsc73xx *vsc, int port, + const unsigned char *addr, u16 vid) +{ + struct vsc73xx_fdb fdb[VSC73XX_NUM_BUCKETS]; + u16 hash = vsc73xx_calc_hash(addr, vid); + int bucket, ret; + + mutex_lock(&vsc->fdb_lock); + + ret = vsc73xx_port_read_mac_table_row(vsc, hash, fdb); + if (ret) + goto err; + + for (bucket = 0; bucket < VSC73XX_NUM_BUCKETS; bucket++) { + if (fdb[bucket].valid && fdb[bucket].port == port && + ether_addr_equal(addr, fdb[bucket].mac)) + break; + } + + if (bucket == VSC73XX_NUM_BUCKETS) { + /* Can't find MAC in MAC table */ + ret = -ENODATA; + goto err; + } + + ret = vsc73xx_fdb_operation(vsc, addr, vid, hash, + VSC73XX_MACACCESS_CMD_MASK, + VSC73XX_MACACCESS_CMD_FORGET); +err: + mutex_unlock(&vsc->fdb_lock); + return ret; +} + +static int vsc73xx_fdb_add_entry(struct vsc73xx *vsc, int port, + const unsigned char *addr, u16 vid) +{ + struct vsc73xx_fdb fdb[VSC73XX_NUM_BUCKETS]; + u16 hash = vsc73xx_calc_hash(addr, vid); + int bucket, ret; + u32 val; + + mutex_lock(&vsc->fdb_lock); + + ret = vsc73xx_port_read_mac_table_row(vsc, hash, fdb); + if (ret) + goto err; + + for (bucket = 0; bucket < VSC73XX_NUM_BUCKETS; bucket++) { + if (!fdb[bucket].valid) + break; + } + + if (bucket == VSC73XX_NUM_BUCKETS) { + /* Bucket is full */ + ret = -EOVERFLOW; + goto err; + } + + val = VSC73XX_MACACCESS_VALID | VSC73XX_MACACCESS_LOCKED | + FIELD_PREP(VSC73XX_MACACCESS_DEST_IDX_MASK, port) | + VSC73XX_MACACCESS_CMD_LEARN; + ret = vsc73xx_fdb_operation(vsc, addr, vid, hash, + VSC73XX_MACACCESS_VALID | + VSC73XX_MACACCESS_LOCKED | + VSC73XX_MACACCESS_DEST_IDX_MASK | + VSC73XX_MACACCESS_CMD_MASK, val); +err: + mutex_unlock(&vsc->fdb_lock); + return ret; +} + +static int vsc73xx_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct vsc73xx *vsc = ds->priv; + + if (!vid) { + switch (db.type) { + case DSA_DB_PORT: + vid = dsa_tag_8021q_standalone_vid(db.dp); + break; + case DSA_DB_BRIDGE: + vid = dsa_tag_8021q_bridge_vid(db.bridge.num); + break; + default: + return -EOPNOTSUPP; + } + } + + return vsc73xx_fdb_add_entry(vsc, port, addr, vid); +} + +static int vsc73xx_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct vsc73xx *vsc = ds->priv; + + if (!vid) { + switch (db.type) { + case DSA_DB_PORT: + vid = dsa_tag_8021q_standalone_vid(db.dp); + break; + case DSA_DB_BRIDGE: + vid = dsa_tag_8021q_bridge_vid(db.bridge.num); + break; + default: + return -EOPNOTSUPP; + } + } + + return vsc73xx_fdb_del_entry(vsc, port, addr, vid); +} + +static int vsc73xx_port_fdb_dump(struct dsa_switch *ds, + int port, dsa_fdb_dump_cb_t *cb, void *data) +{ + struct vsc73xx_fdb fdb[VSC73XX_NUM_BUCKETS]; + struct vsc73xx *vsc = ds->priv; + u16 i, bucket; + int err = 0; + + mutex_lock(&vsc->fdb_lock); + + for (i = 0; i < VSC73XX_NUM_FDB_ROWS; i++) { + err = vsc73xx_port_read_mac_table_row(vsc, i, fdb); + if (err) + goto unlock; + + for (bucket = 0; bucket < VSC73XX_NUM_BUCKETS; bucket++) { + if (!fdb[bucket].valid || fdb[bucket].port != port) + continue; + + /* We need to hide dsa_8021q VLANs from the user */ + if (vid_is_dsa_8021q(fdb[bucket].vid)) + fdb[bucket].vid = 0; + + err = cb(fdb[bucket].mac, fdb[bucket].vid, false, data); + if (err) + goto unlock; + } + } +unlock: + mutex_unlock(&vsc->fdb_lock); + return err; +} + +static const struct phylink_mac_ops vsc73xx_phylink_mac_ops = { + .mac_config = vsc73xx_mac_config, + .mac_link_down = vsc73xx_mac_link_down, + .mac_link_up = vsc73xx_mac_link_up, +}; + static const struct dsa_switch_ops vsc73xx_ds_ops = { .get_tag_protocol = vsc73xx_get_tag_protocol, .setup = vsc73xx_setup, + .teardown = vsc73xx_teardown, .phy_read = vsc73xx_phy_read, .phy_write = vsc73xx_phy_write, - .adjust_link = vsc73xx_adjust_link, .get_strings = vsc73xx_get_strings, .get_ethtool_stats = vsc73xx_get_ethtool_stats, .get_sset_count = vsc73xx_get_sset_count, .port_enable = vsc73xx_port_enable, .port_disable = vsc73xx_port_disable, + .port_pre_bridge_flags = vsc73xx_port_pre_bridge_flags, + .port_bridge_flags = vsc73xx_port_bridge_flags, + .port_bridge_join = dsa_tag_8021q_bridge_join, + .port_bridge_leave = dsa_tag_8021q_bridge_leave, .port_change_mtu = vsc73xx_change_mtu, + .port_fdb_add = vsc73xx_fdb_add, + .port_fdb_del = vsc73xx_fdb_del, + .port_fdb_dump = vsc73xx_port_fdb_dump, .port_max_mtu = vsc73xx_get_max_mtu, + .port_stp_state_set = vsc73xx_port_stp_state_set, + .port_vlan_filtering = vsc73xx_port_vlan_filtering, + .port_vlan_add = vsc73xx_port_vlan_add, + .port_vlan_del = vsc73xx_port_vlan_del, + .phylink_get_caps = vsc73xx_phylink_get_caps, + .tag_8021q_vlan_add = vsc73xx_tag_8021q_vlan_add, + .tag_8021q_vlan_del = vsc73xx_tag_8021q_vlan_del, }; static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset) @@ -1066,14 +2258,14 @@ static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset) return !!(val & BIT(offset)); } -static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, - int val) +static int vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) { struct vsc73xx *vsc = gpiochip_get_data(chip); u32 tmp = val ? BIT(offset) : 0; - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_GPIO, BIT(offset), tmp); + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset), tmp); } static int vsc73xx_gpio_direction_output(struct gpio_chip *chip, @@ -1118,6 +2310,8 @@ static int vsc73xx_gpio_probe(struct vsc73xx *vsc) vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x", vsc->chipid); + if (!vsc->gc.label) + return -ENOMEM; vsc->gc.ngpio = 4; vsc->gc.owner = THIS_MODULE; vsc->gc.parent = vsc->dev; @@ -1170,32 +2364,24 @@ int vsc73xx_probe(struct vsc73xx *vsc) return -ENODEV; } + mutex_init(&vsc->fdb_lock); + eth_random_addr(vsc->addr); dev_info(vsc->dev, "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n", vsc->addr[0], vsc->addr[1], vsc->addr[2], vsc->addr[3], vsc->addr[4], vsc->addr[5]); - /* The VSC7395 switch chips have 5+1 ports which means 5 - * ordinary ports and a sixth CPU port facing the processor - * with an RGMII interface. These ports are numbered 0..4 - * and 6, so they leave a "hole" in the port map for port 5, - * which is invalid. - * - * The VSC7398 has 8 ports, port 7 is again the CPU port. - * - * We allocate 8 ports and avoid access to the nonexistant - * ports. - */ vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL); if (!vsc->ds) return -ENOMEM; vsc->ds->dev = dev; - vsc->ds->num_ports = 8; + vsc->ds->num_ports = VSC73XX_MAX_NUM_PORTS; vsc->ds->priv = vsc; vsc->ds->ops = &vsc73xx_ds_ops; + vsc->ds->phylink_mac_ops = &vsc73xx_phylink_mac_ops; ret = dsa_register_switch(vsc->ds); if (ret) { dev_err(dev, "unable to register switch (%d)\n", ret); diff --git a/drivers/net/dsa/vitesse-vsc73xx-platform.c b/drivers/net/dsa/vitesse-vsc73xx-platform.c index bd4206e8f9af..7a2e0a619b85 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-platform.c +++ b/drivers/net/dsa/vitesse-vsc73xx-platform.c @@ -112,16 +112,14 @@ static int vsc73xx_platform_probe(struct platform_device *pdev) return vsc73xx_probe(&vsc_platform->vsc); } -static int vsc73xx_platform_remove(struct platform_device *pdev) +static void vsc73xx_platform_remove(struct platform_device *pdev) { struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev); if (!vsc_platform) - return 0; + return; vsc73xx_remove(&vsc_platform->vsc); - - return 0; } static void vsc73xx_platform_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h index 30b1f0a36566..3c30e143c14f 100644 --- a/drivers/net/dsa/vitesse-vsc73xx.h +++ b/drivers/net/dsa/vitesse-vsc73xx.h @@ -3,8 +3,49 @@ #include <linux/etherdevice.h> #include <linux/gpio/driver.h> +/* The VSC7395 switch chips have 5+1 ports which means 5 ordinary ports and + * a sixth CPU port facing the processor with an RGMII interface. These ports + * are numbered 0..4 and 6, so they leave a "hole" in the port map for port 5, + * which is invalid. + * + * The VSC7398 has 8 ports, port 7 is again the CPU port. + * + * We allocate 8 ports and avoid access to the nonexistent ports. + */ +#define VSC73XX_MAX_NUM_PORTS 8 + +/** + * struct vsc73xx_portinfo - port data structure: contains storage data + * @pvid_vlan_filtering: pvid vlan number used in vlan filtering mode + * @pvid_tag_8021q: pvid vlan number used in tag_8021q mode + * @pvid_vlan_filtering_configured: informs if port has configured pvid in vlan + * filtering mode + * @pvid_tag_8021q_configured: imforms if port have configured pvid in tag_8021q + * mode + */ +struct vsc73xx_portinfo { + u16 pvid_vlan_filtering; + u16 pvid_tag_8021q; + bool pvid_vlan_filtering_configured; + bool pvid_tag_8021q_configured; +}; + /** - * struct vsc73xx - VSC73xx state container + * struct vsc73xx - VSC73xx state container: main data structure + * @dev: The device pointer + * @reset: The descriptor for the GPIO line tied to the reset pin + * @ds: Pointer to the DSA core structure + * @gc: Main structure of the GPIO controller + * @chipid: Storage for the Chip ID value read from the CHIPID register of the + * switch + * @addr: MAC address used in flow control frames + * @ops: Structure with hardware-dependent operations + * @priv: Pointer to the configuration interface structure + * @portinfo: Storage table portinfo structructures + * @vlans: List of configured vlans. Contains port mask and untagged status of + * every vlan configured in port vlan operation. It doesn't cover tag_8021q + * vlans. + * @fdb_lock: Mutex protects fdb access */ struct vsc73xx { struct device *dev; @@ -15,8 +56,16 @@ struct vsc73xx { u8 addr[ETH_ALEN]; const struct vsc73xx_ops *ops; void *priv; + struct vsc73xx_portinfo portinfo[VSC73XX_MAX_NUM_PORTS]; + struct list_head vlans; + struct mutex fdb_lock; }; +/** + * struct vsc73xx_ops - VSC73xx methods container + * @read: Method for register reading over the hardware-dependent interface + * @write: Method for register writing over the hardware-dependent interface + */ struct vsc73xx_ops { int (*read)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg, u32 *val); @@ -24,6 +73,21 @@ struct vsc73xx_ops { u32 val); }; +/** + * struct vsc73xx_bridge_vlan - VSC73xx driver structure which keeps vlan + * database copy + * @vid: VLAN number + * @portmask: each bit represents one port + * @untagged: each bit represents one port configured with @vid untagged + * @list: list structure + */ +struct vsc73xx_bridge_vlan { + u16 vid; + u8 portmask; + u8 untagged; + struct list_head list; +}; + int vsc73xx_is_addr_valid(u8 block, u8 subblock); int vsc73xx_probe(struct vsc73xx *vsc); void vsc73xx_remove(struct vsc73xx *vsc); diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c index 753fef757f11..0a05f4156ef4 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.c +++ b/drivers/net/dsa/xrs700x/xrs700x.c @@ -91,10 +91,8 @@ static void xrs700x_get_strings(struct dsa_switch *ds, int port, if (stringset != ETH_SS_STATS) return; - for (i = 0; i < ARRAY_SIZE(xrs700x_mibs); i++) { - strscpy(data, xrs700x_mibs[i].name, ETH_GSTRING_LEN); - data += ETH_GSTRING_LEN; - } + for (i = 0; i < ARRAY_SIZE(xrs700x_mibs); i++) + ethtool_puts(&data, xrs700x_mibs[i].name); } static int xrs700x_get_sset_count(struct dsa_switch *ds, int port, int sset) @@ -466,13 +464,25 @@ static void xrs700x_phylink_get_caps(struct dsa_switch *ds, int port, } } -static void xrs700x_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, phy_interface_t interface, +static void xrs700x_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ +} + +static void xrs700x_mac_link_down(struct phylink_config *config, + unsigned int mode, phy_interface_t interface) +{ +} + +static void xrs700x_mac_link_up(struct phylink_config *config, struct phy_device *phydev, + unsigned int mode, phy_interface_t interface, int speed, int duplex, bool tx_pause, bool rx_pause) { - struct xrs700x *priv = ds->priv; + struct dsa_port *dp = dsa_phylink_to_port(config); + struct xrs700x *priv = dp->ds->priv; + int port = dp->index; unsigned int val; switch (speed) { @@ -548,13 +558,15 @@ static void xrs700x_bridge_leave(struct dsa_switch *ds, int port, } static int xrs700x_hsr_join(struct dsa_switch *ds, int port, - struct net_device *hsr) + struct net_device *hsr, + struct netlink_ext_ack *extack) { unsigned int val = XRS_HSR_CFG_HSR_PRP; struct dsa_port *partner = NULL, *dp; struct xrs700x *priv = ds->priv; - struct net_device *slave; + struct net_device *user; int ret, i, hsr_pair[2]; + enum hsr_port_type type; enum hsr_version ver; bool fwd = false; @@ -562,16 +574,31 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port, if (ret) return ret; - /* Only ports 1 and 2 can be HSR/PRP redundant ports. */ - if (port != 1 && port != 2) + if (port != 1 && port != 2) { + NL_SET_ERR_MSG_MOD(extack, + "Only ports 1 and 2 can offload HSR/PRP"); return -EOPNOTSUPP; + } - if (ver == HSR_V1) + if (ver == HSR_V1) { val |= XRS_HSR_CFG_HSR; - else if (ver == PRP_V1) + } else if (ver == PRP_V1) { val |= XRS_HSR_CFG_PRP; - else + } else { + NL_SET_ERR_MSG_MOD(extack, + "Only HSR v1 and PRP v1 can be offloaded"); return -EOPNOTSUPP; + } + + ret = hsr_get_port_type(hsr, dsa_to_port(ds, port)->user, &type); + if (ret) + return ret; + + if (type != HSR_PT_SLAVE_A && type != HSR_PT_SLAVE_B) { + NL_SET_ERR_MSG_MOD(extack, + "Only HSR slave ports can be offloaded"); + return -EOPNOTSUPP; + } dsa_hsr_foreach_port(dp, ds, hsr) { if (dp->index != port) { @@ -632,8 +659,8 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port, hsr_pair[0] = port; hsr_pair[1] = partner->index; for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) { - slave = dsa_to_port(ds, hsr_pair[i])->slave; - slave->features |= XRS7000X_SUPPORTED_HSR_FEATURES; + user = dsa_to_port(ds, hsr_pair[i])->user; + user->features |= XRS7000X_SUPPORTED_HSR_FEATURES; } return 0; @@ -644,7 +671,7 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port, { struct dsa_port *partner = NULL, *dp; struct xrs700x *priv = ds->priv; - struct net_device *slave; + struct net_device *user; int i, hsr_pair[2]; unsigned int val; @@ -686,20 +713,25 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port, hsr_pair[0] = port; hsr_pair[1] = partner->index; for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) { - slave = dsa_to_port(ds, hsr_pair[i])->slave; - slave->features &= ~XRS7000X_SUPPORTED_HSR_FEATURES; + user = dsa_to_port(ds, hsr_pair[i])->user; + user->features &= ~XRS7000X_SUPPORTED_HSR_FEATURES; } return 0; } +static const struct phylink_mac_ops xrs700x_phylink_mac_ops = { + .mac_config = xrs700x_mac_config, + .mac_link_down = xrs700x_mac_link_down, + .mac_link_up = xrs700x_mac_link_up, +}; + static const struct dsa_switch_ops xrs700x_ops = { .get_tag_protocol = xrs700x_get_tag_protocol, .setup = xrs700x_setup, .teardown = xrs700x_teardown, .port_stp_state_set = xrs700x_port_stp_state_set, .phylink_get_caps = xrs700x_phylink_get_caps, - .phylink_mac_link_up = xrs700x_mac_link_up, .get_strings = xrs700x_get_strings, .get_sset_count = xrs700x_get_sset_count, .get_ethtool_stats = xrs700x_get_ethtool_stats, @@ -757,6 +789,7 @@ struct xrs700x *xrs700x_switch_alloc(struct device *base, void *devpriv) INIT_DELAYED_WORK(&priv->mib_work, xrs700x_mib_work); ds->ops = &xrs700x_ops; + ds->phylink_mac_ops = &xrs700x_phylink_mac_ops; ds->priv = priv; priv->dev = base; diff --git a/drivers/net/dsa/xrs700x/xrs700x_i2c.c b/drivers/net/dsa/xrs700x/xrs700x_i2c.c index c1179d7311f7..9b731dea78c1 100644 --- a/drivers/net/dsa/xrs700x/xrs700x_i2c.c +++ b/drivers/net/dsa/xrs700x/xrs700x_i2c.c @@ -127,8 +127,8 @@ static void xrs700x_i2c_shutdown(struct i2c_client *i2c) } static const struct i2c_device_id xrs700x_i2c_id[] = { - { "xrs700x-switch", 0 }, - {}, + { "xrs700x-switch" }, + {} }; MODULE_DEVICE_TABLE(i2c, xrs700x_i2c_id); diff --git a/drivers/net/dsa/yt921x.c b/drivers/net/dsa/yt921x.c new file mode 100644 index 000000000000..1c511f5dc6ab --- /dev/null +++ b/drivers/net/dsa/yt921x.c @@ -0,0 +1,3006 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Motorcomm YT921x Switch + * + * Should work on YT9213/YT9214/YT9215/YT9218, but only tested on YT9215+SGMII, + * be sure to do your own checks before porting to another chip. + * + * Copyright (c) 2025 David Yang + */ + +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_hsr.h> +#include <linux/if_vlan.h> +#include <linux/iopoll.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> + +#include <net/dsa.h> + +#include "yt921x.h" + +struct yt921x_mib_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +#define MIB_DESC(_size, _offset, _name) \ + {_size, _offset, _name} + +/* Must agree with yt921x_mib + * + * Unstructured fields (name != NULL) will appear in get_ethtool_stats(), + * structured go to their *_stats() methods, but we need their sizes and offsets + * to perform 32bit MIB overflow wraparound. + */ +static const struct yt921x_mib_desc yt921x_mib_descs[] = { + MIB_DESC(1, YT921X_MIB_DATA_RX_BROADCAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PAUSE, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_MULTICAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_CRC_ERR, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_ALIGN_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_UNDERSIZE_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_FRAG_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_64, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_65_TO_127, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_128_TO_255, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_256_TO_511, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_512_TO_1023, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_1024_TO_1518, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_1519_TO_MAX, NULL), + MIB_DESC(2, YT921X_MIB_DATA_RX_GOOD_BYTES, NULL), + + MIB_DESC(2, YT921X_MIB_DATA_RX_BAD_BYTES, "RxBadBytes"), + MIB_DESC(1, YT921X_MIB_DATA_RX_OVERSIZE_ERR, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_DROPPED, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_BROADCAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PAUSE, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_MULTICAST, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_UNDERSIZE_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_64, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_65_TO_127, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_128_TO_255, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_256_TO_511, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_512_TO_1023, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_1024_TO_1518, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_1519_TO_MAX, NULL), + + MIB_DESC(2, YT921X_MIB_DATA_TX_GOOD_BYTES, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_COLLISION, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_EXCESSIVE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_MULTIPLE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_SINGLE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_DEFERRED, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_LATE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_OAM, "RxOAM"), + MIB_DESC(1, YT921X_MIB_DATA_TX_OAM, "TxOAM"), +}; + +struct yt921x_info { + const char *name; + u16 major; + /* Unknown, seems to be plain enumeration */ + u8 mode; + u8 extmode; + /* Ports with integral GbE PHYs, not including MCU Port 10 */ + u16 internal_mask; + /* TODO: see comments in yt921x_dsa_phylink_get_caps() */ + u16 external_mask; +}; + +#define YT921X_PORT_MASK_INTn(port) BIT(port) +#define YT921X_PORT_MASK_INT0_n(n) GENMASK((n) - 1, 0) +#define YT921X_PORT_MASK_EXT0 BIT(8) +#define YT921X_PORT_MASK_EXT1 BIT(9) + +static const struct yt921x_info yt921x_infos[] = { + { + "YT9215SC", YT9215_MAJOR, 1, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9215S", YT9215_MAJOR, 2, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9215RB", YT9215_MAJOR, 3, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9214NB", YT9215_MAJOR, 3, 2, + YT921X_PORT_MASK_INTn(1) | YT921X_PORT_MASK_INTn(3), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9213NB", YT9215_MAJOR, 3, 3, + YT921X_PORT_MASK_INTn(1) | YT921X_PORT_MASK_INTn(3), + YT921X_PORT_MASK_EXT1, + }, + { + "YT9218N", YT9218_MAJOR, 0, 0, + YT921X_PORT_MASK_INT0_n(8), + 0, + }, + { + "YT9218MB", YT9218_MAJOR, 1, 0, + YT921X_PORT_MASK_INT0_n(8), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + {} +}; + +#define YT921X_NAME "yt921x" + +#define YT921X_VID_UNWARE 4095 + +#define YT921X_POLL_SLEEP_US 10000 +#define YT921X_POLL_TIMEOUT_US 100000 + +/* The interval should be small enough to avoid overflow of 32bit MIBs. + * + * Until we can read MIBs from stats64 call directly (i.e. sleep + * there), we have to poll stats more frequently then it is actually needed. + * For overflow protection, normally, 100 sec interval should have been OK. + */ +#define YT921X_STATS_INTERVAL_JIFFIES (3 * HZ) + +struct yt921x_reg_mdio { + struct mii_bus *bus; + int addr; + /* SWITCH_ID_1 / SWITCH_ID_0 of the device + * + * This is a way to multiplex multiple devices on the same MII phyaddr + * and should be configurable in DT. However, MDIO core simply doesn't + * allow multiple devices over one reg addr, so this is a fixed value + * for now until a solution is found. + * + * Keep this because we need switchid to form MII regaddrs anyway. + */ + unsigned char switchid; +}; + +/* TODO: SPI/I2C */ + +#define to_yt921x_priv(_ds) container_of_const(_ds, struct yt921x_priv, ds) +#define to_device(priv) ((priv)->ds.dev) + +static int yt921x_reg_read(struct yt921x_priv *priv, u32 reg, u32 *valp) +{ + WARN_ON(!mutex_is_locked(&priv->reg_lock)); + + return priv->reg_ops->read(priv->reg_ctx, reg, valp); +} + +static int yt921x_reg_write(struct yt921x_priv *priv, u32 reg, u32 val) +{ + WARN_ON(!mutex_is_locked(&priv->reg_lock)); + + return priv->reg_ops->write(priv->reg_ctx, reg, val); +} + +static int +yt921x_reg_wait(struct yt921x_priv *priv, u32 reg, u32 mask, u32 *valp) +{ + u32 val; + int res; + int ret; + + ret = read_poll_timeout(yt921x_reg_read, res, + res || (val & mask) == *valp, + YT921X_POLL_SLEEP_US, YT921X_POLL_TIMEOUT_US, + false, priv, reg, &val); + if (ret) + return ret; + if (res) + return res; + + *valp = val; + return 0; +} + +static int +yt921x_reg_update_bits(struct yt921x_priv *priv, u32 reg, u32 mask, u32 val) +{ + int res; + u32 v; + u32 u; + + res = yt921x_reg_read(priv, reg, &v); + if (res) + return res; + + u = v; + u &= ~mask; + u |= val; + if (u == v) + return 0; + + return yt921x_reg_write(priv, reg, u); +} + +static int yt921x_reg_set_bits(struct yt921x_priv *priv, u32 reg, u32 mask) +{ + return yt921x_reg_update_bits(priv, reg, 0, mask); +} + +static int yt921x_reg_clear_bits(struct yt921x_priv *priv, u32 reg, u32 mask) +{ + return yt921x_reg_update_bits(priv, reg, mask, 0); +} + +static int +yt921x_reg_toggle_bits(struct yt921x_priv *priv, u32 reg, u32 mask, bool set) +{ + return yt921x_reg_update_bits(priv, reg, mask, !set ? 0 : mask); +} + +/* Some registers, like VLANn_CTRL, should always be written in 64-bit, even if + * you are to write only the lower / upper 32 bits. + * + * There is no such restriction for reading, but we still provide 64-bit read + * wrappers so that we always handle u64 values. + */ + +static int yt921x_reg64_read(struct yt921x_priv *priv, u32 reg, u64 *valp) +{ + u32 lo; + u32 hi; + int res; + + res = yt921x_reg_read(priv, reg, &lo); + if (res) + return res; + res = yt921x_reg_read(priv, reg + 4, &hi); + if (res) + return res; + + *valp = ((u64)hi << 32) | lo; + return 0; +} + +static int yt921x_reg64_write(struct yt921x_priv *priv, u32 reg, u64 val) +{ + int res; + + res = yt921x_reg_write(priv, reg, (u32)val); + if (res) + return res; + return yt921x_reg_write(priv, reg + 4, (u32)(val >> 32)); +} + +static int +yt921x_reg64_update_bits(struct yt921x_priv *priv, u32 reg, u64 mask, u64 val) +{ + int res; + u64 v; + u64 u; + + res = yt921x_reg64_read(priv, reg, &v); + if (res) + return res; + + u = v; + u &= ~mask; + u |= val; + if (u == v) + return 0; + + return yt921x_reg64_write(priv, reg, u); +} + +static int yt921x_reg64_clear_bits(struct yt921x_priv *priv, u32 reg, u64 mask) +{ + return yt921x_reg64_update_bits(priv, reg, mask, 0); +} + +static int yt921x_reg_mdio_read(void *context, u32 reg, u32 *valp) +{ + struct yt921x_reg_mdio *mdio = context; + struct mii_bus *bus = mdio->bus; + int addr = mdio->addr; + u32 reg_addr; + u32 reg_data; + u32 val; + int res; + + /* Hold the mdio bus lock to avoid (un)locking for 4 times */ + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + reg_addr = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_ADDR | + YT921X_SMI_READ; + res = __mdiobus_write(bus, addr, reg_addr, (u16)(reg >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_addr, (u16)reg); + if (res) + goto end; + + reg_data = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_DATA | + YT921X_SMI_READ; + res = __mdiobus_read(bus, addr, reg_data); + if (res < 0) + goto end; + val = (u16)res; + res = __mdiobus_read(bus, addr, reg_data); + if (res < 0) + goto end; + val = (val << 16) | (u16)res; + + *valp = val; + res = 0; + +end: + mutex_unlock(&bus->mdio_lock); + return res; +} + +static int yt921x_reg_mdio_write(void *context, u32 reg, u32 val) +{ + struct yt921x_reg_mdio *mdio = context; + struct mii_bus *bus = mdio->bus; + int addr = mdio->addr; + u32 reg_addr; + u32 reg_data; + int res; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + reg_addr = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_ADDR | + YT921X_SMI_WRITE; + res = __mdiobus_write(bus, addr, reg_addr, (u16)(reg >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_addr, (u16)reg); + if (res) + goto end; + + reg_data = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_DATA | + YT921X_SMI_WRITE; + res = __mdiobus_write(bus, addr, reg_data, (u16)(val >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_data, (u16)val); + if (res) + goto end; + + res = 0; + +end: + mutex_unlock(&bus->mdio_lock); + return res; +} + +static const struct yt921x_reg_ops yt921x_reg_ops_mdio = { + .read = yt921x_reg_mdio_read, + .write = yt921x_reg_mdio_write, +}; + +/* TODO: SPI/I2C */ + +static int yt921x_intif_wait(struct yt921x_priv *priv) +{ + u32 val = 0; + + return yt921x_reg_wait(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START, + &val); +} + +static int +yt921x_intif_read(struct yt921x_priv *priv, int port, int reg, u16 *valp) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + u32 val; + int res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_READ; + res = yt921x_reg_update_bits(priv, YT921X_INT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_INT_MBUS_DIN, &val); + if (res) + return res; + + if ((u16)val != val) + dev_info(dev, + "%s: port %d, reg 0x%x: Expected u16, got 0x%08x\n", + __func__, port, reg, val); + *valp = (u16)val; + return 0; +} + +static int +yt921x_intif_write(struct yt921x_priv *priv, int port, int reg, u16 val) +{ + u32 mask; + u32 ctrl; + int res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_WRITE; + res = yt921x_reg_update_bits(priv, YT921X_INT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_DOUT, val); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + return yt921x_intif_wait(priv); +} + +static int yt921x_mbus_int_read(struct mii_bus *mbus, int port, int reg) +{ + struct yt921x_priv *priv = mbus->priv; + u16 val; + int res; + + if (port >= YT921X_PORT_NUM) + return U16_MAX; + + mutex_lock(&priv->reg_lock); + res = yt921x_intif_read(priv, port, reg, &val); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + return val; +} + +static int +yt921x_mbus_int_write(struct mii_bus *mbus, int port, int reg, u16 data) +{ + struct yt921x_priv *priv = mbus->priv; + int res; + + if (port >= YT921X_PORT_NUM) + return -ENODEV; + + mutex_lock(&priv->reg_lock); + res = yt921x_intif_write(priv, port, reg, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_mbus_int_init(struct yt921x_priv *priv, struct device_node *mnp) +{ + struct device *dev = to_device(priv); + struct mii_bus *mbus; + int res; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = "YT921x internal MDIO bus"; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); + mbus->priv = priv; + mbus->read = yt921x_mbus_int_read; + mbus->write = yt921x_mbus_int_write; + mbus->parent = dev; + mbus->phy_mask = (u32)~GENMASK(YT921X_PORT_NUM - 1, 0); + + res = devm_of_mdiobus_register(dev, mbus, mnp); + if (res) + return res; + + priv->mbus_int = mbus; + + return 0; +} + +static int yt921x_extif_wait(struct yt921x_priv *priv) +{ + u32 val = 0; + + return yt921x_reg_wait(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START, + &val); +} + +static int +yt921x_extif_read(struct yt921x_priv *priv, int port, int reg, u16 *valp) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + u32 val; + int res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_TYPE_M | YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_TYPE_C22 | YT921X_MBUS_CTRL_READ; + res = yt921x_reg_update_bits(priv, YT921X_EXT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_EXT_MBUS_DIN, &val); + if (res) + return res; + + if ((u16)val != val) + dev_info(dev, + "%s: port %d, reg 0x%x: Expected u16, got 0x%08x\n", + __func__, port, reg, val); + *valp = (u16)val; + return 0; +} + +static int +yt921x_extif_write(struct yt921x_priv *priv, int port, int reg, u16 val) +{ + u32 mask; + u32 ctrl; + int res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_TYPE_M | YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_TYPE_C22 | YT921X_MBUS_CTRL_WRITE; + res = yt921x_reg_update_bits(priv, YT921X_EXT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_DOUT, val); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + return yt921x_extif_wait(priv); +} + +static int yt921x_mbus_ext_read(struct mii_bus *mbus, int port, int reg) +{ + struct yt921x_priv *priv = mbus->priv; + u16 val; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_extif_read(priv, port, reg, &val); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + return val; +} + +static int +yt921x_mbus_ext_write(struct mii_bus *mbus, int port, int reg, u16 data) +{ + struct yt921x_priv *priv = mbus->priv; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_extif_write(priv, port, reg, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_mbus_ext_init(struct yt921x_priv *priv, struct device_node *mnp) +{ + struct device *dev = to_device(priv); + struct mii_bus *mbus; + int res; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = "YT921x external MDIO bus"; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%s@ext", dev_name(dev)); + mbus->priv = priv; + /* TODO: c45? */ + mbus->read = yt921x_mbus_ext_read; + mbus->write = yt921x_mbus_ext_write; + mbus->parent = dev; + + res = devm_of_mdiobus_register(dev, mbus, mnp); + if (res) + return res; + + priv->mbus_ext = mbus; + + return 0; +} + +/* Read and handle overflow of 32bit MIBs. MIB buffer must be zeroed before. */ +static int yt921x_read_mib(struct yt921x_priv *priv, int port) +{ + struct yt921x_port *pp = &priv->ports[port]; + struct device *dev = to_device(priv); + struct yt921x_mib *mib = &pp->mib; + int res = 0; + + /* Reading of yt921x_port::mib is not protected by a lock and it's vain + * to keep its consistency, since we have to read registers one by one + * and there is no way to make a snapshot of MIB stats. + * + * Writing (by this function only) is and should be protected by + * reg_lock. + */ + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + u32 reg = YT921X_MIBn_DATA0(port) + desc->offset; + u64 *valp = &((u64 *)mib)[i]; + u64 val = *valp; + u32 val0; + u32 val1; + + res = yt921x_reg_read(priv, reg, &val0); + if (res) + break; + + if (desc->size <= 1) { + if (val < (u32)val) + /* overflow */ + val += (u64)U32_MAX + 1; + val &= ~U32_MAX; + val |= val0; + } else { + res = yt921x_reg_read(priv, reg + 4, &val1); + if (res) + break; + val = ((u64)val1 << 32) | val0; + } + + WRITE_ONCE(*valp, val); + } + + pp->rx_frames = mib->rx_64byte + mib->rx_65_127byte + + mib->rx_128_255byte + mib->rx_256_511byte + + mib->rx_512_1023byte + mib->rx_1024_1518byte + + mib->rx_jumbo; + pp->tx_frames = mib->tx_64byte + mib->tx_65_127byte + + mib->tx_128_255byte + mib->tx_256_511byte + + mib->tx_512_1023byte + mib->tx_1024_1518byte + + mib->tx_jumbo; + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "read stats for", + port, res); + return res; +} + +static void yt921x_poll_mib(struct work_struct *work) +{ + struct yt921x_port *pp = container_of_const(work, struct yt921x_port, + mib_read.work); + struct yt921x_priv *priv = (void *)(pp - pp->index) - + offsetof(struct yt921x_priv, ports); + unsigned long delay = YT921X_STATS_INTERVAL_JIFFIES; + int port = pp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + if (res) + delay *= 4; + + schedule_delayed_work(&pp->mib_read, delay); +} + +static void +yt921x_dsa_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + if (stringset != ETH_SS_STATS) + return; + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (desc->name) + ethtool_puts(&data, desc->name); + } +} + +static void +yt921x_dsa_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + size_t j; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + j = 0; + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (!desc->name) + continue; + + data[j] = ((u64 *)mib)[i]; + j++; + } +} + +static int yt921x_dsa_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + int cnt = 0; + + if (sset != ETH_SS_STATS) + return 0; + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (desc->name) + cnt++; + } + + return cnt; +} + +static void +yt921x_dsa_get_eth_mac_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_mac_stats *mac_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + mac_stats->FramesTransmittedOK = pp->tx_frames; + mac_stats->SingleCollisionFrames = mib->tx_single_collisions; + mac_stats->MultipleCollisionFrames = mib->tx_multiple_collisions; + mac_stats->FramesReceivedOK = pp->rx_frames; + mac_stats->FrameCheckSequenceErrors = mib->rx_crc_errors; + mac_stats->AlignmentErrors = mib->rx_alignment_errors; + mac_stats->OctetsTransmittedOK = mib->tx_good_bytes; + mac_stats->FramesWithDeferredXmissions = mib->tx_deferred; + mac_stats->LateCollisions = mib->tx_late_collisions; + mac_stats->FramesAbortedDueToXSColls = mib->tx_aborted_errors; + /* mac_stats->FramesLostDueToIntMACXmitError */ + /* mac_stats->CarrierSenseErrors */ + mac_stats->OctetsReceivedOK = mib->rx_good_bytes; + /* mac_stats->FramesLostDueToIntMACRcvError */ + mac_stats->MulticastFramesXmittedOK = mib->tx_multicast; + mac_stats->BroadcastFramesXmittedOK = mib->tx_broadcast; + /* mac_stats->FramesWithExcessiveDeferral */ + mac_stats->MulticastFramesReceivedOK = mib->rx_multicast; + mac_stats->BroadcastFramesReceivedOK = mib->rx_broadcast; + /* mac_stats->InRangeLengthErrors */ + /* mac_stats->OutOfRangeLengthField */ + mac_stats->FrameTooLongErrors = mib->rx_oversize_errors; +} + +static void +yt921x_dsa_get_eth_ctrl_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_ctrl_stats *ctrl_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + ctrl_stats->MACControlFramesTransmitted = mib->tx_pause; + ctrl_stats->MACControlFramesReceived = mib->rx_pause; + /* ctrl_stats->UnsupportedOpcodesReceived */ +} + +static const struct ethtool_rmon_hist_range yt921x_rmon_ranges[] = { + { 0, 64 }, + { 65, 127 }, + { 128, 255 }, + { 256, 511 }, + { 512, 1023 }, + { 1024, 1518 }, + { 1519, YT921X_FRAME_SIZE_MAX }, + {} +}; + +static void +yt921x_dsa_get_rmon_stats(struct dsa_switch *ds, int port, + struct ethtool_rmon_stats *rmon_stats, + const struct ethtool_rmon_hist_range **ranges) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + *ranges = yt921x_rmon_ranges; + + rmon_stats->undersize_pkts = mib->rx_undersize_errors; + rmon_stats->oversize_pkts = mib->rx_oversize_errors; + rmon_stats->fragments = mib->rx_alignment_errors; + /* rmon_stats->jabbers */ + + rmon_stats->hist[0] = mib->rx_64byte; + rmon_stats->hist[1] = mib->rx_65_127byte; + rmon_stats->hist[2] = mib->rx_128_255byte; + rmon_stats->hist[3] = mib->rx_256_511byte; + rmon_stats->hist[4] = mib->rx_512_1023byte; + rmon_stats->hist[5] = mib->rx_1024_1518byte; + rmon_stats->hist[6] = mib->rx_jumbo; + + rmon_stats->hist_tx[0] = mib->tx_64byte; + rmon_stats->hist_tx[1] = mib->tx_65_127byte; + rmon_stats->hist_tx[2] = mib->tx_128_255byte; + rmon_stats->hist_tx[3] = mib->tx_256_511byte; + rmon_stats->hist_tx[4] = mib->tx_512_1023byte; + rmon_stats->hist_tx[5] = mib->tx_1024_1518byte; + rmon_stats->hist_tx[6] = mib->tx_jumbo; +} + +static void +yt921x_dsa_get_stats64(struct dsa_switch *ds, int port, + struct rtnl_link_stats64 *stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + stats->rx_length_errors = mib->rx_undersize_errors + + mib->rx_fragment_errors; + stats->rx_over_errors = mib->rx_oversize_errors; + stats->rx_crc_errors = mib->rx_crc_errors; + stats->rx_frame_errors = mib->rx_alignment_errors; + /* stats->rx_fifo_errors */ + /* stats->rx_missed_errors */ + + stats->tx_aborted_errors = mib->tx_aborted_errors; + /* stats->tx_carrier_errors */ + stats->tx_fifo_errors = mib->tx_undersize_errors; + /* stats->tx_heartbeat_errors */ + stats->tx_window_errors = mib->tx_late_collisions; + + stats->rx_packets = pp->rx_frames; + stats->tx_packets = pp->tx_frames; + stats->rx_bytes = mib->rx_good_bytes - ETH_FCS_LEN * stats->rx_packets; + stats->tx_bytes = mib->tx_good_bytes - ETH_FCS_LEN * stats->tx_packets; + stats->rx_errors = stats->rx_length_errors + stats->rx_over_errors + + stats->rx_crc_errors + stats->rx_frame_errors; + stats->tx_errors = stats->tx_aborted_errors + stats->tx_fifo_errors + + stats->tx_window_errors; + stats->rx_dropped = mib->rx_dropped; + /* stats->tx_dropped */ + stats->multicast = mib->rx_multicast; + stats->collisions = mib->tx_collisions; +} + +static void +yt921x_dsa_get_pause_stats(struct dsa_switch *ds, int port, + struct ethtool_pause_stats *pause_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + pause_stats->tx_pause_frames = mib->tx_pause; + pause_stats->rx_pause_frames = mib->rx_pause; +} + +static int +yt921x_set_eee(struct yt921x_priv *priv, int port, struct ethtool_keee *e) +{ + /* Poor datasheet for EEE operations; don't ask if you are confused */ + + bool enable = e->eee_enabled; + u16 new_mask; + int res; + + /* Enable / disable global EEE */ + new_mask = priv->eee_ports_mask; + new_mask &= ~BIT(port); + new_mask |= !enable ? 0 : BIT(port); + + if (!!new_mask != !!priv->eee_ports_mask) { + res = yt921x_reg_toggle_bits(priv, YT921X_PON_STRAP_FUNC, + YT921X_PON_STRAP_EEE, !!new_mask); + if (res) + return res; + res = yt921x_reg_toggle_bits(priv, YT921X_PON_STRAP_VAL, + YT921X_PON_STRAP_EEE, !!new_mask); + if (res) + return res; + } + + priv->eee_ports_mask = new_mask; + + /* Enable / disable port EEE */ + res = yt921x_reg_toggle_bits(priv, YT921X_EEE_CTRL, + YT921X_EEE_CTRL_ENn(port), enable); + if (res) + return res; + res = yt921x_reg_toggle_bits(priv, YT921X_EEEn_VAL(port), + YT921X_EEE_VAL_DATA, enable); + if (res) + return res; + + return 0; +} + +static int +yt921x_dsa_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_set_eee(priv, port, e); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + /* Only serves as packet filter, since the frame size is always set to + * maximum after reset + */ + + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct dsa_port *dp = dsa_to_port(ds, port); + int frame_size; + int res; + + frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN; + if (dsa_port_is_cpu(dp)) + frame_size += YT921X_TAG_LEN; + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_update_bits(priv, YT921X_MACn_FRAME(port), + YT921X_MAC_FRAME_SIZE_M, + YT921X_MAC_FRAME_SIZE(frame_size)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_dsa_port_max_mtu(struct dsa_switch *ds, int port) +{ + /* Only called for user ports, exclude tag len here */ + return YT921X_FRAME_SIZE_MAX - ETH_HLEN - ETH_FCS_LEN - YT921X_TAG_LEN; +} + +static int +yt921x_mirror_del(struct yt921x_priv *priv, int port, bool ingress) +{ + u32 mask; + + if (ingress) + mask = YT921X_MIRROR_IGR_PORTn(port); + else + mask = YT921X_MIRROR_EGR_PORTn(port); + return yt921x_reg_clear_bits(priv, YT921X_MIRROR, mask); +} + +static int +yt921x_mirror_add(struct yt921x_priv *priv, int port, bool ingress, + int to_local_port, struct netlink_ext_ack *extack) +{ + u32 srcs; + u32 ctrl; + u32 val; + u32 dst; + int res; + + if (ingress) + srcs = YT921X_MIRROR_IGR_PORTn(port); + else + srcs = YT921X_MIRROR_EGR_PORTn(port); + dst = YT921X_MIRROR_PORT(to_local_port); + + res = yt921x_reg_read(priv, YT921X_MIRROR, &val); + if (res) + return res; + + /* other mirror tasks & different dst port -> conflict */ + if ((val & ~srcs & (YT921X_MIRROR_EGR_PORTS_M | + YT921X_MIRROR_IGR_PORTS_M)) && + (val & YT921X_MIRROR_PORT_M) != dst) { + NL_SET_ERR_MSG_MOD(extack, + "Sniffer port is already configured, delete existing rules & retry"); + return -EBUSY; + } + + ctrl = val & ~YT921X_MIRROR_PORT_M; + ctrl |= srcs; + ctrl |= dst; + + if (ctrl == val) + return 0; + + return yt921x_reg_write(priv, YT921X_MIRROR, ctrl); +} + +static void +yt921x_dsa_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_mirror_del(priv, port, mirror->ingress); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "unmirror", + port, res); +} + +static int +yt921x_dsa_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_mirror_add(priv, port, ingress, + mirror->to_local_port, extack); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_fdb_wait(struct yt921x_priv *priv, u32 *valp) +{ + struct device *dev = to_device(priv); + u32 val = YT921X_FDB_RESULT_DONE; + int res; + + res = yt921x_reg_wait(priv, YT921X_FDB_RESULT, YT921X_FDB_RESULT_DONE, + &val); + if (res) { + dev_err(dev, "FDB probably stuck\n"); + return res; + } + + *valp = val; + return 0; +} + +static int +yt921x_fdb_in01(struct yt921x_priv *priv, const unsigned char *addr, + u16 vid, u32 ctrl1) +{ + u32 ctrl; + int res; + + ctrl = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; + res = yt921x_reg_write(priv, YT921X_FDB_IN0, ctrl); + if (res) + return res; + + ctrl = ctrl1 | YT921X_FDB_IO1_FID(vid) | (addr[4] << 8) | addr[5]; + return yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl); +} + +static int +yt921x_fdb_has(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 *indexp) +{ + u32 ctrl; + u32 val; + int res; + + res = yt921x_fdb_in01(priv, addr, vid, 0); + if (res) + return res; + + ctrl = 0; + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_GET_ONE | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + if (val & YT921X_FDB_RESULT_NOTFOUND) { + *indexp = YT921X_FDB_NUM; + return 0; + } + + *indexp = FIELD_GET(YT921X_FDB_RESULT_INDEX_M, val); + return 0; +} + +static int +yt921x_fdb_read(struct yt921x_priv *priv, unsigned char *addr, u16 *vidp, + u16 *ports_maskp, u16 *indexp, u8 *statusp) +{ + struct device *dev = to_device(priv); + u16 index; + u32 data0; + u32 data1; + u32 data2; + u32 val; + int res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + if (val & YT921X_FDB_RESULT_NOTFOUND) { + *ports_maskp = 0; + return 0; + } + index = FIELD_GET(YT921X_FDB_RESULT_INDEX_M, val); + + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &data1); + if (res) + return res; + if ((data1 & YT921X_FDB_IO1_STATUS_M) == + YT921X_FDB_IO1_STATUS_INVALID) { + *ports_maskp = 0; + return 0; + } + + res = yt921x_reg_read(priv, YT921X_FDB_OUT0, &data0); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &data2); + if (res) + return res; + + addr[0] = data0 >> 24; + addr[1] = data0 >> 16; + addr[2] = data0 >> 8; + addr[3] = data0; + addr[4] = data1 >> 8; + addr[5] = data1; + *vidp = FIELD_GET(YT921X_FDB_IO1_FID_M, data1); + *indexp = index; + *ports_maskp = FIELD_GET(YT921X_FDB_IO2_EGR_PORTS_M, data2); + *statusp = FIELD_GET(YT921X_FDB_IO1_STATUS_M, data1); + + dev_dbg(dev, + "%s: index 0x%x, mac %02x:%02x:%02x:%02x:%02x:%02x, vid %d, ports 0x%x, status %d\n", + __func__, *indexp, addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], *vidp, *ports_maskp, *statusp); + return 0; +} + +static int +yt921x_fdb_dump(struct yt921x_priv *priv, u16 ports_mask, + dsa_fdb_dump_cb_t *cb, void *data) +{ + unsigned char addr[ETH_ALEN]; + u8 status; + u16 pmask; + u16 index; + u32 ctrl; + u16 vid; + int res; + + ctrl = YT921X_FDB_OP_INDEX(0) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_OP_GET_ONE | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + res = yt921x_fdb_read(priv, addr, &vid, &pmask, &index, &status); + if (res) + return res; + if ((pmask & ports_mask) && !is_multicast_ether_addr(addr)) { + res = cb(addr, vid, + status == YT921X_FDB_ENTRY_STATUS_STATIC, data); + if (res) + return res; + } + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + index = 0; + do { + ctrl = YT921X_FDB_OP_INDEX(index) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_NEXT_TYPE_UCAST_PORT | + YT921X_FDB_OP_OP_GET_NEXT | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_read(priv, addr, &vid, &pmask, &index, + &status); + if (res) + return res; + if (!pmask) + break; + + if ((pmask & ports_mask) && !is_multicast_ether_addr(addr)) { + res = cb(addr, vid, + status == YT921X_FDB_ENTRY_STATUS_STATIC, + data); + if (res) + return res; + } + + /* Never call GET_NEXT with 4095, otherwise it will hang + * forever until a reset! + */ + } while (index < YT921X_FDB_NUM - 1); + + return 0; +} + +static int +yt921x_fdb_flush_raw(struct yt921x_priv *priv, u16 ports_mask, u16 vid, + bool flush_static) +{ + u32 ctrl; + u32 val; + int res; + + if (vid < 4096) { + ctrl = YT921X_FDB_IO1_FID(vid); + res = yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl); + if (res) + return res; + } + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_FLUSH | YT921X_FDB_OP_START; + if (vid >= 4096) + ctrl |= YT921X_FDB_OP_FLUSH_PORT; + else + ctrl |= YT921X_FDB_OP_FLUSH_PORT_VID; + if (flush_static) + ctrl |= YT921X_FDB_OP_FLUSH_STATIC; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + + return 0; +} + +static int +yt921x_fdb_flush_port(struct yt921x_priv *priv, int port, bool flush_static) +{ + return yt921x_fdb_flush_raw(priv, BIT(port), 4096, flush_static); +} + +static int +yt921x_fdb_add_index_in12(struct yt921x_priv *priv, u16 index, u16 ctrl1, + u16 ctrl2) +{ + u32 ctrl; + u32 val; + int res; + + res = yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl1); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl2); + if (res) + return res; + + ctrl = YT921X_FDB_OP_INDEX(index) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_OP_ADD | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); +} + +static int +yt921x_fdb_add(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 ports_mask) +{ + u32 ctrl; + u32 val; + int res; + + ctrl = YT921X_FDB_IO1_STATUS_STATIC; + res = yt921x_fdb_in01(priv, addr, vid, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_ADD | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); +} + +static int +yt921x_fdb_leave(struct yt921x_priv *priv, const unsigned char *addr, + u16 vid, u16 ports_mask) +{ + u16 index; + u32 ctrl1; + u32 ctrl2; + u32 ctrl; + u32 val2; + u32 val; + int res; + + /* Check for presence */ + res = yt921x_fdb_has(priv, addr, vid, &index); + if (res) + return res; + if (index >= YT921X_FDB_NUM) + return 0; + + /* Check if action required */ + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2); + if (res) + return res; + + ctrl2 = val2 & ~YT921X_FDB_IO2_EGR_PORTS(ports_mask); + if (ctrl2 == val2) + return 0; + if (!(ctrl2 & YT921X_FDB_IO2_EGR_PORTS_M)) { + ctrl = YT921X_FDB_OP_OP_DEL | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); + } + + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &ctrl1); + if (res) + return res; + + return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2); +} + +static int +yt921x_fdb_join(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 ports_mask) +{ + u16 index; + u32 ctrl1; + u32 ctrl2; + u32 val1; + u32 val2; + int res; + + /* Check for presence */ + res = yt921x_fdb_has(priv, addr, vid, &index); + if (res) + return res; + if (index >= YT921X_FDB_NUM) + return yt921x_fdb_add(priv, addr, vid, ports_mask); + + /* Check if action required */ + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &val1); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2); + if (res) + return res; + + ctrl1 = val1 & ~YT921X_FDB_IO1_STATUS_M; + ctrl1 |= YT921X_FDB_IO1_STATUS_STATIC; + ctrl2 = val2 | YT921X_FDB_IO2_EGR_PORTS(ports_mask); + if (ctrl1 == val1 && ctrl2 == val2) + return 0; + + return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2); +} + +static int +yt921x_dsa_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + /* Hardware FDB is shared for fdb and mdb, "bridge fdb show" + * only wants to see unicast + */ + res = yt921x_fdb_dump(priv, BIT(port), cb, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void yt921x_dsa_port_fast_age(struct dsa_switch *ds, int port) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_flush_port(priv, port, false); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "clear FDB for", + port, res); +} + +static int +yt921x_dsa_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u32 ctrl; + int res; + + /* AGEING reg is set in 5s step */ + ctrl = clamp(msecs / 5000, 1, U16_MAX); + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_write(priv, YT921X_AGEING, ctrl); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_leave(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_join(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const unsigned char *addr = mdb->addr; + u16 vid = mdb->vid; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_leave(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const unsigned char *addr = mdb->addr; + u16 vid = mdb->vid; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_join(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_port_set_pvid(struct yt921x_priv *priv, int port, u16 vid) +{ + u32 mask; + u32 ctrl; + + mask = YT921X_PORT_VLAN_CTRL_CVID_M; + ctrl = YT921X_PORT_VLAN_CTRL_CVID(vid); + return yt921x_reg_update_bits(priv, YT921X_PORTn_VLAN_CTRL(port), + mask, ctrl); +} + +static int +yt921x_vlan_filtering(struct yt921x_priv *priv, int port, bool vlan_filtering) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + struct net_device *bdev; + u16 pvid; + u32 mask; + u32 ctrl; + int res; + + bdev = dsa_port_bridge_dev_get(dp); + + if (!bdev || !vlan_filtering) + pvid = YT921X_VID_UNWARE; + else + br_vlan_get_pvid(bdev, &pvid); + res = yt921x_port_set_pvid(priv, port, pvid); + if (res) + return res; + + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_TAGGED | + YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + ctrl = 0; + /* Do not drop tagged frames here; let VLAN_IGR_FILTER do it */ + if (vlan_filtering && !pvid) + ctrl |= YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_update_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), + mask, ctrl); + if (res) + return res; + + res = yt921x_reg_toggle_bits(priv, YT921X_VLAN_IGR_FILTER, + YT921X_VLAN_IGR_FILTER_PORTn(port), + vlan_filtering); + if (res) + return res; + + /* Turn on / off VLAN awareness */ + mask = YT921X_PORT_IGR_TPIDn_CTAG_M; + if (!vlan_filtering) + ctrl = 0; + else + ctrl = YT921X_PORT_IGR_TPIDn_CTAG(0); + res = yt921x_reg_update_bits(priv, YT921X_PORTn_IGR_TPID(port), + mask, ctrl); + if (res) + return res; + + return 0; +} + +static int +yt921x_vlan_del(struct yt921x_priv *priv, int port, u16 vid) +{ + u64 mask64; + + mask64 = YT921X_VLAN_CTRL_PORTS(port) | + YT921X_VLAN_CTRL_UNTAG_PORTn(port); + + return yt921x_reg64_clear_bits(priv, YT921X_VLANn_CTRL(vid), mask64); +} + +static int +yt921x_vlan_add(struct yt921x_priv *priv, int port, u16 vid, bool untagged) +{ + u64 mask64; + u64 ctrl64; + + mask64 = YT921X_VLAN_CTRL_PORTn(port) | + YT921X_VLAN_CTRL_PORTS(priv->cpu_ports_mask); + ctrl64 = mask64; + + mask64 |= YT921X_VLAN_CTRL_UNTAG_PORTn(port); + if (untagged) + ctrl64 |= YT921X_VLAN_CTRL_UNTAG_PORTn(port); + + return yt921x_reg64_update_bits(priv, YT921X_VLANn_CTRL(vid), + mask64, ctrl64); +} + +static int +yt921x_pvid_clear(struct yt921x_priv *priv, int port) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + bool vlan_filtering; + u32 mask; + int res; + + vlan_filtering = dsa_port_is_vlan_filtering(dp); + + res = yt921x_port_set_pvid(priv, port, + vlan_filtering ? 0 : YT921X_VID_UNWARE); + if (res) + return res; + + if (vlan_filtering) { + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_set_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), + mask); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_pvid_set(struct yt921x_priv *priv, int port, u16 vid) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + bool vlan_filtering; + u32 mask; + int res; + + vlan_filtering = dsa_port_is_vlan_filtering(dp); + + if (vlan_filtering) { + res = yt921x_port_set_pvid(priv, port, vid); + if (res) + return res; + } + + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), mask); + if (res) + return res; + + return 0; +} + +static int +yt921x_dsa_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + res = yt921x_vlan_filtering(priv, port, vlan_filtering); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 vid = vlan->vid; + u16 pvid; + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + do { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + res = yt921x_vlan_del(priv, port, vid); + if (res) + break; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + br_vlan_get_pvid(bdev, &pvid); + if (pvid == vid) + res = yt921x_pvid_clear(priv, port); + } + } while (0); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 vid = vlan->vid; + u16 pvid; + int res; + + /* CPU port is supposed to be a member of every VLAN; see + * yt921x_vlan_add() and yt921x_port_setup() + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + do { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + res = yt921x_vlan_add(priv, port, vid, + vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED); + if (res) + break; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + res = yt921x_pvid_set(priv, port, vid); + } else { + br_vlan_get_pvid(bdev, &pvid); + if (pvid == vid) + res = yt921x_pvid_clear(priv, port); + } + } + } while (0); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_userport_standalone(struct yt921x_priv *priv, int port) +{ + u32 mask; + u32 ctrl; + int res; + + ctrl = ~priv->cpu_ports_mask; + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), ctrl); + if (res) + return res; + + /* Turn off FDB learning to prevent FDB pollution */ + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_set_bits(priv, YT921X_PORTn_LEARN(port), mask); + if (res) + return res; + + /* Turn off VLAN awareness */ + mask = YT921X_PORT_IGR_TPIDn_CTAG_M; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_IGR_TPID(port), mask); + if (res) + return res; + + /* Unrelated since learning is off and all packets are trapped; + * set it anyway + */ + res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE); + if (res) + return res; + + return 0; +} + +static int yt921x_userport_bridge(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_LEARN(port), mask); + if (res) + return res; + + return 0; +} + +static int yt921x_isolate(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = BIT(port); + for (int i = 0; i < YT921X_PORT_NUM; i++) { + if ((BIT(i) & priv->cpu_ports_mask) || i == port) + continue; + + res = yt921x_reg_set_bits(priv, YT921X_PORTn_ISOLATION(i), + mask); + if (res) + return res; + } + + return 0; +} + +/* Make sure to include the CPU port in ports_mask, or your bridge will + * not have it. + */ +static int yt921x_bridge(struct yt921x_priv *priv, u16 ports_mask) +{ + unsigned long targets_mask = ports_mask & ~priv->cpu_ports_mask; + u32 isolated_mask; + u32 ctrl; + int port; + int res; + + isolated_mask = 0; + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + if (pp->isolated) + isolated_mask |= BIT(port); + } + + /* Block from non-cpu bridge ports ... */ + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + /* to non-bridge ports */ + ctrl = ~ports_mask; + /* to isolated ports when isolated */ + if (pp->isolated) + ctrl |= isolated_mask; + /* to itself when non-hairpin */ + if (!pp->hairpin) + ctrl |= BIT(port); + else + ctrl &= ~BIT(port); + + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), + ctrl); + if (res) + return res; + } + + return 0; +} + +static int yt921x_bridge_leave(struct yt921x_priv *priv, int port) +{ + int res; + + res = yt921x_userport_standalone(priv, port); + if (res) + return res; + + res = yt921x_isolate(priv, port); + if (res) + return res; + + return 0; +} + +static int +yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask) +{ + int res; + + res = yt921x_userport_bridge(priv, port); + if (res) + return res; + + res = yt921x_bridge(priv, ports_mask); + if (res) + return res; + + return 0; +} + +static u32 +dsa_bridge_ports(struct dsa_switch *ds, const struct net_device *bdev) +{ + struct dsa_port *dp; + u32 mask = 0; + + dsa_switch_for_each_user_port(dp, ds) + if (dsa_port_offloads_bridge_dev(dp, bdev)) + mask |= BIT(dp->index); + + return mask; +} + +static int +yt921x_bridge_flags(struct yt921x_priv *priv, int port, + struct switchdev_brport_flags flags) +{ + struct yt921x_port *pp = &priv->ports[port]; + bool do_flush; + u32 mask; + int res; + + if (flags.mask & BR_LEARNING) { + bool learning = flags.val & BR_LEARNING; + + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_toggle_bits(priv, YT921X_PORTn_LEARN(port), + mask, !learning); + if (res) + return res; + } + + /* BR_FLOOD, BR_MCAST_FLOOD: see the comment where ACT_UNK_ACTn_TRAP + * is set + */ + + /* BR_BCAST_FLOOD: we can filter bcast, but cannot trap them */ + + do_flush = false; + if (flags.mask & BR_HAIRPIN_MODE) { + pp->hairpin = flags.val & BR_HAIRPIN_MODE; + do_flush = true; + } + if (flags.mask & BR_ISOLATED) { + pp->isolated = flags.val & BR_ISOLATED; + do_flush = true; + } + if (do_flush) { + struct dsa_switch *ds = &priv->ds; + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + u32 ports_mask; + + ports_mask = dsa_bridge_ports(ds, bdev); + ports_mask |= priv->cpu_ports_mask; + res = yt921x_bridge(priv, ports_mask); + if (res) + return res; + } + } + + return 0; +} + +static int +yt921x_dsa_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~(BR_HAIRPIN_MODE | BR_LEARNING | BR_FLOOD | + BR_MCAST_FLOOD | BR_ISOLATED)) + return -EINVAL; + return 0; +} + +static int +yt921x_dsa_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_flags(priv, port, flags); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void +yt921x_dsa_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + if (dsa_is_cpu_port(ds, port)) + return; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_leave(priv, port); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "unbridge", + port, res); +} + +static int +yt921x_dsa_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 ports_mask; + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + ports_mask = dsa_bridge_ports(ds, bridge.dev); + ports_mask |= priv->cpu_ports_mask; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_join(priv, port, ports_mask); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mst_state_set(struct dsa_switch *ds, int port, + const struct switchdev_mst_state *st) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u32 mask; + u32 ctrl; + int res; + + mask = YT921X_STP_PORTn_M(port); + switch (st->state) { + case BR_STATE_DISABLED: + ctrl = YT921X_STP_PORTn_DISABLED(port); + break; + case BR_STATE_LISTENING: + case BR_STATE_LEARNING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + break; + case BR_STATE_FORWARDING: + default: + ctrl = YT921X_STP_PORTn_FORWARD(port); + break; + case BR_STATE_BLOCKING: + ctrl = YT921X_STP_PORTn_BLOCKING(port); + break; + } + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_update_bits(priv, YT921X_STPn(st->msti), mask, ctrl); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_vlan_msti_set(struct dsa_switch *ds, struct dsa_bridge bridge, + const struct switchdev_vlan_msti *msti) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u64 mask64; + u64 ctrl64; + int res; + + if (!msti->vid) + return -EINVAL; + if (!msti->msti || msti->msti >= YT921X_MSTI_NUM) + return -EINVAL; + + mask64 = YT921X_VLAN_CTRL_STP_ID_M; + ctrl64 = YT921X_VLAN_CTRL_STP_ID(msti->msti); + + mutex_lock(&priv->reg_lock); + res = yt921x_reg64_update_bits(priv, YT921X_VLANn_CTRL(msti->vid), + mask64, ctrl64); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void +yt921x_dsa_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct dsa_port *dp = dsa_to_port(ds, port); + struct device *dev = to_device(priv); + bool learning; + u32 mask; + u32 ctrl; + int res; + + mask = YT921X_STP_PORTn_M(port); + learning = false; + switch (state) { + case BR_STATE_DISABLED: + ctrl = YT921X_STP_PORTn_DISABLED(port); + break; + case BR_STATE_LISTENING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + break; + case BR_STATE_LEARNING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + learning = dp->learning; + break; + case BR_STATE_FORWARDING: + default: + ctrl = YT921X_STP_PORTn_FORWARD(port); + learning = dp->learning; + break; + case BR_STATE_BLOCKING: + ctrl = YT921X_STP_PORTn_BLOCKING(port); + break; + } + + mutex_lock(&priv->reg_lock); + do { + res = yt921x_reg_update_bits(priv, YT921X_STPn(0), mask, ctrl); + if (res) + break; + + mask = YT921X_PORT_LEARN_DIS; + ctrl = !learning ? YT921X_PORT_LEARN_DIS : 0; + res = yt921x_reg_update_bits(priv, YT921X_PORTn_LEARN(port), + mask, ctrl); + } while (0); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "set STP state for", + port, res); +} + +static int yt921x_port_down(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = YT921X_PORT_LINK | YT921X_PORT_RX_MAC_EN | YT921X_PORT_TX_MAC_EN; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_CTRL(port), mask); + if (res) + return res; + + if (yt921x_port_is_external(port)) { + mask = YT921X_SERDES_LINK; + res = yt921x_reg_clear_bits(priv, YT921X_SERDESn(port), mask); + if (res) + return res; + + mask = YT921X_XMII_LINK; + res = yt921x_reg_clear_bits(priv, YT921X_XMIIn(port), mask); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + u32 mask; + u32 ctrl; + int res; + + switch (speed) { + case SPEED_10: + ctrl = YT921X_PORT_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_PORT_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_PORT_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_PORT_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_PORT_SPEED_10000; + break; + default: + return -EINVAL; + } + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_PORT_DUPLEX_FULL; + if (tx_pause) + ctrl |= YT921X_PORT_TX_PAUSE; + if (rx_pause) + ctrl |= YT921X_PORT_RX_PAUSE; + ctrl |= YT921X_PORT_RX_MAC_EN | YT921X_PORT_TX_MAC_EN; + res = yt921x_reg_write(priv, YT921X_PORTn_CTRL(port), ctrl); + if (res) + return res; + + if (yt921x_port_is_external(port)) { + mask = YT921X_SERDES_SPEED_M; + switch (speed) { + case SPEED_10: + ctrl = YT921X_SERDES_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_SERDES_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_SERDES_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_SERDES_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_SERDES_SPEED_10000; + break; + default: + return -EINVAL; + } + mask |= YT921X_SERDES_DUPLEX_FULL; + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_SERDES_DUPLEX_FULL; + mask |= YT921X_SERDES_TX_PAUSE; + if (tx_pause) + ctrl |= YT921X_SERDES_TX_PAUSE; + mask |= YT921X_SERDES_RX_PAUSE; + if (rx_pause) + ctrl |= YT921X_SERDES_RX_PAUSE; + mask |= YT921X_SERDES_LINK; + ctrl |= YT921X_SERDES_LINK; + res = yt921x_reg_update_bits(priv, YT921X_SERDESn(port), + mask, ctrl); + if (res) + return res; + + mask = YT921X_XMII_LINK; + res = yt921x_reg_set_bits(priv, YT921X_XMIIn(port), mask); + if (res) + return res; + + switch (speed) { + case SPEED_10: + ctrl = YT921X_MDIO_POLLING_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_MDIO_POLLING_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_MDIO_POLLING_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_MDIO_POLLING_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_MDIO_POLLING_SPEED_10000; + break; + default: + return -EINVAL; + } + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_MDIO_POLLING_DUPLEX_FULL; + ctrl |= YT921X_MDIO_POLLING_LINK; + res = yt921x_reg_write(priv, YT921X_MDIO_POLLINGn(port), ctrl); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode, + phy_interface_t interface) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + int res; + + if (!yt921x_port_is_external(port)) { + if (interface != PHY_INTERFACE_MODE_INTERNAL) { + dev_err(dev, "Wrong mode %d on port %d\n", + interface, port); + return -EINVAL; + } + return 0; + } + + switch (interface) { + /* SERDES */ + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_100BASEX: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + mask = YT921X_SERDES_CTRL_PORTn(port); + res = yt921x_reg_set_bits(priv, YT921X_SERDES_CTRL, mask); + if (res) + return res; + + mask = YT921X_XMII_CTRL_PORTn(port); + res = yt921x_reg_clear_bits(priv, YT921X_XMII_CTRL, mask); + if (res) + return res; + + mask = YT921X_SERDES_MODE_M; + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + ctrl = YT921X_SERDES_MODE_SGMII; + break; + case PHY_INTERFACE_MODE_100BASEX: + ctrl = YT921X_SERDES_MODE_100BASEX; + break; + case PHY_INTERFACE_MODE_1000BASEX: + ctrl = YT921X_SERDES_MODE_1000BASEX; + break; + case PHY_INTERFACE_MODE_2500BASEX: + ctrl = YT921X_SERDES_MODE_2500BASEX; + break; + default: + return -EINVAL; + } + res = yt921x_reg_update_bits(priv, YT921X_SERDESn(port), + mask, ctrl); + if (res) + return res; + + break; + /* add XMII support here */ + default: + return -EINVAL; + } + + return 0; +} + +static void +yt921x_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + /* No need to sync; port control block is hold until device remove */ + cancel_delayed_work(&priv->ports[port].mib_read); + + mutex_lock(&priv->reg_lock); + res = yt921x_port_down(priv, port); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "bring down", + port, res); +} + +static void +yt921x_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_up(priv, port, mode, interface, speed, duplex, + tx_pause, rx_pause); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "bring up", + port, res); + + schedule_delayed_work(&priv->ports[port].mib_read, 0); +} + +static void +yt921x_phylink_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_config(priv, port, mode, state->interface); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "config", + port, res); +} + +static void +yt921x_dsa_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const struct yt921x_info *info = priv->info; + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + + if (info->internal_mask & BIT(port)) { + /* Port 10 for MCU should probably go here too. But since that + * is untested yet, turn it down for the moment by letting it + * fall to the default branch. + */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + } else if (info->external_mask & BIT(port)) { + /* TODO: external ports may support SERDES only, XMII only, or + * SERDES + XMII depending on the chip. However, we can't get + * the accurate config table due to lack of document, thus + * we simply declare SERDES + XMII and rely on the correctness + * of devicetree for now. + */ + + /* SERDES */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + /* REVSGMII (SGMII in PHY role) should go here, once + * PHY_INTERFACE_MODE_REVSGMII is introduced. + */ + __set_bit(PHY_INTERFACE_MODE_100BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + config->mac_capabilities |= MAC_2500FD; + + /* XMII */ + + /* Not tested. To add support for XMII: + * - Add proper interface modes below + * - Handle them in yt921x_port_config() + */ + } + /* no such port: empty supported_interfaces causes phylink to turn it + * down + */ +} + +static int yt921x_port_setup(struct yt921x_priv *priv, int port) +{ + struct dsa_switch *ds = &priv->ds; + u32 ctrl; + int res; + + res = yt921x_userport_standalone(priv, port); + if (res) + return res; + + if (dsa_is_cpu_port(ds, port)) { + /* Egress of CPU port is supposed to be completely controlled + * via tagging, so set to oneway isolated (drop all packets + * without tag). + */ + ctrl = ~(u32)0; + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), + ctrl); + if (res) + return res; + + /* To simplify FDB "isolation" simulation, we also disable + * learning on the CPU port, and let software identify packets + * towarding CPU (either trapped or a static FDB entry is + * matched, no matter which bridge that entry is for), which is + * already done by yt921x_userport_standalone(). As a result, + * VLAN-awareness becomes unrelated on the CPU port (set to + * VLAN-unaware by the way). + */ + } + + return 0; +} + +static enum dsa_tag_protocol +yt921x_dsa_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol m) +{ + return DSA_TAG_PROTO_YT921X; +} + +static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_setup(priv, port); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_edata_wait(struct yt921x_priv *priv, u32 *valp) +{ + u32 val = YT921X_EDATA_DATA_IDLE; + int res; + + res = yt921x_reg_wait(priv, YT921X_EDATA_DATA, + YT921X_EDATA_DATA_STATUS_M, &val); + if (res) + return res; + + *valp = val; + return 0; +} + +static int +yt921x_edata_read_cont(struct yt921x_priv *priv, u8 addr, u8 *valp) +{ + u32 ctrl; + u32 val; + int res; + + ctrl = YT921X_EDATA_CTRL_ADDR(addr) | YT921X_EDATA_CTRL_READ; + res = yt921x_reg_write(priv, YT921X_EDATA_CTRL, ctrl); + if (res) + return res; + res = yt921x_edata_wait(priv, &val); + if (res) + return res; + + *valp = FIELD_GET(YT921X_EDATA_DATA_DATA_M, val); + return 0; +} + +static int yt921x_edata_read(struct yt921x_priv *priv, u8 addr, u8 *valp) +{ + u32 val; + int res; + + res = yt921x_edata_wait(priv, &val); + if (res) + return res; + return yt921x_edata_read_cont(priv, addr, valp); +} + +static int yt921x_chip_detect(struct yt921x_priv *priv) +{ + struct device *dev = to_device(priv); + const struct yt921x_info *info; + u8 extmode; + u32 chipid; + u32 major; + u32 mode; + int res; + + res = yt921x_reg_read(priv, YT921X_CHIP_ID, &chipid); + if (res) + return res; + + major = FIELD_GET(YT921X_CHIP_ID_MAJOR, chipid); + + for (info = yt921x_infos; info->name; info++) + if (info->major == major) + break; + if (!info->name) { + dev_err(dev, "Unexpected chipid 0x%x\n", chipid); + return -ENODEV; + } + + res = yt921x_reg_read(priv, YT921X_CHIP_MODE, &mode); + if (res) + return res; + res = yt921x_edata_read(priv, YT921X_EDATA_EXTMODE, &extmode); + if (res) + return res; + + for (; info->name; info++) + if (info->major == major && info->mode == mode && + info->extmode == extmode) + break; + if (!info->name) { + dev_err(dev, + "Unsupported chipid 0x%x with chipmode 0x%x 0x%x\n", + chipid, mode, extmode); + return -ENODEV; + } + + /* Print chipid here since we are interested in lower 16 bits */ + dev_info(dev, + "Motorcomm %s ethernet switch, chipid: 0x%x, chipmode: 0x%x 0x%x\n", + info->name, chipid, mode, extmode); + + priv->info = info; + return 0; +} + +static int yt921x_chip_reset(struct yt921x_priv *priv) +{ + struct device *dev = to_device(priv); + u16 eth_p_tag; + u32 val; + int res; + + res = yt921x_chip_detect(priv); + if (res) + return res; + + /* Reset */ + res = yt921x_reg_write(priv, YT921X_RST, YT921X_RST_HW); + if (res) + return res; + + /* RST_HW is almost same as GPIO hard reset, so we need this delay. */ + fsleep(YT921X_RST_DELAY_US); + + val = 0; + res = yt921x_reg_wait(priv, YT921X_RST, ~0, &val); + if (res) + return res; + + /* Check for tag EtherType; do it after reset in case you messed it up + * before. + */ + res = yt921x_reg_read(priv, YT921X_CPU_TAG_TPID, &val); + if (res) + return res; + eth_p_tag = FIELD_GET(YT921X_CPU_TAG_TPID_TPID_M, val); + if (eth_p_tag != ETH_P_YT921X) { + dev_err(dev, "Tag type 0x%x != 0x%x\n", eth_p_tag, + ETH_P_YT921X); + /* Despite being possible, we choose not to set CPU_TAG_TPID, + * since there is no way it can be different unless you have the + * wrong chip. + */ + return -EINVAL; + } + + return 0; +} + +static int yt921x_chip_setup(struct yt921x_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + unsigned long cpu_ports_mask; + u64 ctrl64; + u32 ctrl; + int port; + int res; + + /* Enable DSA */ + priv->cpu_ports_mask = dsa_cpu_ports(ds); + + ctrl = YT921X_EXT_CPU_PORT_TAG_EN | YT921X_EXT_CPU_PORT_PORT_EN | + YT921X_EXT_CPU_PORT_PORT(__ffs(priv->cpu_ports_mask)); + res = yt921x_reg_write(priv, YT921X_EXT_CPU_PORT, ctrl); + if (res) + return res; + + /* Enable and clear MIB */ + res = yt921x_reg_set_bits(priv, YT921X_FUNC, YT921X_FUNC_MIB); + if (res) + return res; + + ctrl = YT921X_MIB_CTRL_CLEAN | YT921X_MIB_CTRL_ALL_PORT; + res = yt921x_reg_write(priv, YT921X_MIB_CTRL, ctrl); + if (res) + return res; + + /* Setup software switch */ + ctrl = YT921X_CPU_COPY_TO_EXT_CPU; + res = yt921x_reg_write(priv, YT921X_CPU_COPY, ctrl); + if (res) + return res; + + ctrl = GENMASK(10, 0); + res = yt921x_reg_write(priv, YT921X_FILTER_UNK_UCAST, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_FILTER_UNK_MCAST, ctrl); + if (res) + return res; + + /* YT921x does not support native DSA port bridging, so we use port + * isolation to emulate it. However, be especially careful that port + * isolation takes _after_ FDB lookups, i.e. if an FDB entry (from + * another bridge) is matched and the destination port (in another + * bridge) is blocked, the packet will be dropped instead of flooding to + * the "bridged" ports, thus we need to trap and handle those packets by + * software. + * + * If there is no more than one bridge, we might be able to drop them + * directly given some conditions are met, but we trap them in all cases + * for now. + */ + ctrl = 0; + for (int i = 0; i < YT921X_PORT_NUM; i++) + ctrl |= YT921X_ACT_UNK_ACTn_TRAP(i); + /* Except for CPU ports, if any packets are sent via CPU ports without + * tag, they should be dropped. + */ + cpu_ports_mask = priv->cpu_ports_mask; + for_each_set_bit(port, &cpu_ports_mask, YT921X_PORT_NUM) { + ctrl &= ~YT921X_ACT_UNK_ACTn_M(port); + ctrl |= YT921X_ACT_UNK_ACTn_DROP(port); + } + res = yt921x_reg_write(priv, YT921X_ACT_UNK_UCAST, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_ACT_UNK_MCAST, ctrl); + if (res) + return res; + + /* Tagged VID 0 should be treated as untagged, which confuses the + * hardware a lot + */ + ctrl64 = YT921X_VLAN_CTRL_LEARN_DIS | YT921X_VLAN_CTRL_PORTS_M; + res = yt921x_reg64_write(priv, YT921X_VLANn_CTRL(0), ctrl64); + if (res) + return res; + + /* Miscellaneous */ + res = yt921x_reg_set_bits(priv, YT921X_SENSOR, YT921X_SENSOR_TEMP); + if (res) + return res; + + return 0; +} + +static int yt921x_dsa_setup(struct dsa_switch *ds) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + struct device_node *np = dev->of_node; + struct device_node *child; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_chip_reset(priv); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + + /* Register the internal mdio bus. Nodes for internal ports should have + * proper phy-handle pointing to their PHYs. Not enabling the internal + * bus is possible, though pretty wired, if internal ports are not used. + */ + child = of_get_child_by_name(np, "mdio"); + if (child) { + res = yt921x_mbus_int_init(priv, child); + of_node_put(child); + if (res) + return res; + } + + /* External mdio bus is optional */ + child = of_get_child_by_name(np, "mdio-external"); + if (child) { + res = yt921x_mbus_ext_init(priv, child); + of_node_put(child); + if (res) + return res; + + dev_err(dev, "Untested external mdio bus\n"); + return -ENODEV; + } + + mutex_lock(&priv->reg_lock); + res = yt921x_chip_setup(priv); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + + return 0; +} + +static const struct phylink_mac_ops yt921x_phylink_mac_ops = { + .mac_link_down = yt921x_phylink_mac_link_down, + .mac_link_up = yt921x_phylink_mac_link_up, + .mac_config = yt921x_phylink_mac_config, +}; + +static const struct dsa_switch_ops yt921x_dsa_switch_ops = { + /* mib */ + .get_strings = yt921x_dsa_get_strings, + .get_ethtool_stats = yt921x_dsa_get_ethtool_stats, + .get_sset_count = yt921x_dsa_get_sset_count, + .get_eth_mac_stats = yt921x_dsa_get_eth_mac_stats, + .get_eth_ctrl_stats = yt921x_dsa_get_eth_ctrl_stats, + .get_rmon_stats = yt921x_dsa_get_rmon_stats, + .get_stats64 = yt921x_dsa_get_stats64, + .get_pause_stats = yt921x_dsa_get_pause_stats, + /* eee */ + .support_eee = dsa_supports_eee, + .set_mac_eee = yt921x_dsa_set_mac_eee, + /* mtu */ + .port_change_mtu = yt921x_dsa_port_change_mtu, + .port_max_mtu = yt921x_dsa_port_max_mtu, + /* hsr */ + .port_hsr_leave = dsa_port_simple_hsr_leave, + .port_hsr_join = dsa_port_simple_hsr_join, + /* mirror */ + .port_mirror_del = yt921x_dsa_port_mirror_del, + .port_mirror_add = yt921x_dsa_port_mirror_add, + /* fdb */ + .port_fdb_dump = yt921x_dsa_port_fdb_dump, + .port_fast_age = yt921x_dsa_port_fast_age, + .set_ageing_time = yt921x_dsa_set_ageing_time, + .port_fdb_del = yt921x_dsa_port_fdb_del, + .port_fdb_add = yt921x_dsa_port_fdb_add, + .port_mdb_del = yt921x_dsa_port_mdb_del, + .port_mdb_add = yt921x_dsa_port_mdb_add, + /* vlan */ + .port_vlan_filtering = yt921x_dsa_port_vlan_filtering, + .port_vlan_del = yt921x_dsa_port_vlan_del, + .port_vlan_add = yt921x_dsa_port_vlan_add, + /* bridge */ + .port_pre_bridge_flags = yt921x_dsa_port_pre_bridge_flags, + .port_bridge_flags = yt921x_dsa_port_bridge_flags, + .port_bridge_leave = yt921x_dsa_port_bridge_leave, + .port_bridge_join = yt921x_dsa_port_bridge_join, + /* mst */ + .port_mst_state_set = yt921x_dsa_port_mst_state_set, + .vlan_msti_set = yt921x_dsa_vlan_msti_set, + .port_stp_state_set = yt921x_dsa_port_stp_state_set, + /* port */ + .get_tag_protocol = yt921x_dsa_get_tag_protocol, + .phylink_get_caps = yt921x_dsa_phylink_get_caps, + .port_setup = yt921x_dsa_port_setup, + /* chip */ + .setup = yt921x_dsa_setup, +}; + +static void yt921x_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct yt921x_priv *priv = mdiodev_get_drvdata(mdiodev); + + if (!priv) + return; + + dsa_switch_shutdown(&priv->ds); +} + +static void yt921x_mdio_remove(struct mdio_device *mdiodev) +{ + struct yt921x_priv *priv = mdiodev_get_drvdata(mdiodev); + + if (!priv) + return; + + for (size_t i = ARRAY_SIZE(priv->ports); i-- > 0; ) { + struct yt921x_port *pp = &priv->ports[i]; + + disable_delayed_work_sync(&pp->mib_read); + } + + dsa_unregister_switch(&priv->ds); + + mutex_destroy(&priv->reg_lock); +} + +static int yt921x_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct yt921x_reg_mdio *mdio; + struct yt921x_priv *priv; + struct dsa_switch *ds; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mdio = devm_kzalloc(dev, sizeof(*mdio), GFP_KERNEL); + if (!mdio) + return -ENOMEM; + + mdio->bus = mdiodev->bus; + mdio->addr = mdiodev->addr; + mdio->switchid = 0; + + mutex_init(&priv->reg_lock); + + priv->reg_ops = &yt921x_reg_ops_mdio; + priv->reg_ctx = mdio; + + for (size_t i = 0; i < ARRAY_SIZE(priv->ports); i++) { + struct yt921x_port *pp = &priv->ports[i]; + + pp->index = i; + INIT_DELAYED_WORK(&pp->mib_read, yt921x_poll_mib); + } + + ds = &priv->ds; + ds->dev = dev; + ds->assisted_learning_on_cpu_port = true; + ds->priv = priv; + ds->ops = &yt921x_dsa_switch_ops; + ds->ageing_time_min = 1 * 5000; + ds->ageing_time_max = U16_MAX * 5000; + ds->phylink_mac_ops = &yt921x_phylink_mac_ops; + ds->num_ports = YT921X_PORT_NUM; + + mdiodev_set_drvdata(mdiodev, priv); + + return dsa_register_switch(ds); +} + +static const struct of_device_id yt921x_of_match[] = { + { .compatible = "motorcomm,yt9215" }, + {} +}; +MODULE_DEVICE_TABLE(of, yt921x_of_match); + +static struct mdio_driver yt921x_mdio_driver = { + .probe = yt921x_mdio_probe, + .remove = yt921x_mdio_remove, + .shutdown = yt921x_mdio_shutdown, + .mdiodrv.driver = { + .name = YT921X_NAME, + .of_match_table = yt921x_of_match, + }, +}; + +mdio_module_driver(yt921x_mdio_driver); + +MODULE_AUTHOR("David Yang <mmyangfl@gmail.com>"); +MODULE_DESCRIPTION("Driver for Motorcomm YT921x Switch"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/yt921x.h b/drivers/net/dsa/yt921x.h new file mode 100644 index 000000000000..61bb0ab3b09a --- /dev/null +++ b/drivers/net/dsa/yt921x.h @@ -0,0 +1,567 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2025 David Yang + */ + +#ifndef __YT921X_H +#define __YT921X_H + +#include <net/dsa.h> + +#define YT921X_SMI_SWITCHID_M GENMASK(3, 2) +#define YT921X_SMI_SWITCHID(x) FIELD_PREP(YT921X_SMI_SWITCHID_M, (x)) +#define YT921X_SMI_AD BIT(1) +#define YT921X_SMI_ADDR 0 +#define YT921X_SMI_DATA YT921X_SMI_AD +#define YT921X_SMI_RW BIT(0) +#define YT921X_SMI_WRITE 0 +#define YT921X_SMI_READ YT921X_SMI_RW + +#define YT921X_SWITCHID_NUM 4 + +#define YT921X_RST 0x80000 +#define YT921X_RST_HW BIT(31) +#define YT921X_RST_SW BIT(1) +#define YT921X_FUNC 0x80004 +#define YT921X_FUNC_MIB BIT(1) +#define YT921X_CHIP_ID 0x80008 +#define YT921X_CHIP_ID_MAJOR GENMASK(31, 16) +#define YT921X_EXT_CPU_PORT 0x8000c +#define YT921X_EXT_CPU_PORT_TAG_EN BIT(15) +#define YT921X_EXT_CPU_PORT_PORT_EN BIT(14) +#define YT921X_EXT_CPU_PORT_PORT_M GENMASK(3, 0) +#define YT921X_EXT_CPU_PORT_PORT(x) FIELD_PREP(YT921X_EXT_CPU_PORT_PORT_M, (x)) +#define YT921X_CPU_TAG_TPID 0x80010 +#define YT921X_CPU_TAG_TPID_TPID_M GENMASK(15, 0) +/* Same as ETH_P_YT921X, but this represents the true HW default, while the + * former is a local convention chosen by us. + */ +#define YT921X_CPU_TAG_TPID_TPID_DEFAULT 0x9988 +#define YT921X_PVID_SEL 0x80014 +#define YT921X_PVID_SEL_SVID_PORTn(port) BIT(port) +#define YT921X_SERDES_CTRL 0x80028 +#define YT921X_SERDES_CTRL_PORTn_TEST(port) BIT((port) - 3) +#define YT921X_SERDES_CTRL_PORTn(port) BIT((port) - 8) +#define YT921X_IO_LEVEL 0x80030 +#define YT9215_IO_LEVEL_NORMAL_M GENMASK(5, 4) +#define YT9215_IO_LEVEL_NORMAL(x) FIELD_PREP(YT9215_IO_LEVEL_NORMAL_M, (x)) +#define YT9215_IO_LEVEL_NORMAL_3V3 YT9215_IO_LEVEL_NORMAL(0) +#define YT9215_IO_LEVEL_NORMAL_1V8 YT9215_IO_LEVEL_NORMAL(3) +#define YT9215_IO_LEVEL_RGMII1_M GENMASK(3, 2) +#define YT9215_IO_LEVEL_RGMII1(x) FIELD_PREP(YT9215_IO_LEVEL_RGMII1_M, (x)) +#define YT9215_IO_LEVEL_RGMII1_3V3 YT9215_IO_LEVEL_RGMII1(0) +#define YT9215_IO_LEVEL_RGMII1_2V5 YT9215_IO_LEVEL_RGMII1(1) +#define YT9215_IO_LEVEL_RGMII1_1V8 YT9215_IO_LEVEL_RGMII1(2) +#define YT9215_IO_LEVEL_RGMII0_M GENMASK(1, 0) +#define YT9215_IO_LEVEL_RGMII0(x) FIELD_PREP(YT9215_IO_LEVEL_RGMII0_M, (x)) +#define YT9215_IO_LEVEL_RGMII0_3V3 YT9215_IO_LEVEL_RGMII0(0) +#define YT9215_IO_LEVEL_RGMII0_2V5 YT9215_IO_LEVEL_RGMII0(1) +#define YT9215_IO_LEVEL_RGMII0_1V8 YT9215_IO_LEVEL_RGMII0(2) +#define YT9218_IO_LEVEL_RGMII1_M GENMASK(5, 4) +#define YT9218_IO_LEVEL_RGMII1(x) FIELD_PREP(YT9218_IO_LEVEL_RGMII1_M, (x)) +#define YT9218_IO_LEVEL_RGMII1_3V3 YT9218_IO_LEVEL_RGMII1(0) +#define YT9218_IO_LEVEL_RGMII1_2V5 YT9218_IO_LEVEL_RGMII1(1) +#define YT9218_IO_LEVEL_RGMII1_1V8 YT9218_IO_LEVEL_RGMII1(2) +#define YT9218_IO_LEVEL_RGMII0_M GENMASK(3, 2) +#define YT9218_IO_LEVEL_RGMII0(x) FIELD_PREP(YT9218_IO_LEVEL_RGMII0_M, (x)) +#define YT9218_IO_LEVEL_RGMII0_3V3 YT9218_IO_LEVEL_RGMII0(0) +#define YT9218_IO_LEVEL_RGMII0_2V5 YT9218_IO_LEVEL_RGMII0(1) +#define YT9218_IO_LEVEL_RGMII0_1V8 YT9218_IO_LEVEL_RGMII0(2) +#define YT9218_IO_LEVEL_NORMAL_M GENMASK(1, 0) +#define YT9218_IO_LEVEL_NORMAL(x) FIELD_PREP(YT9218_IO_LEVEL_NORMAL_M, (x)) +#define YT9218_IO_LEVEL_NORMAL_3V3 YT9218_IO_LEVEL_NORMAL(0) +#define YT9218_IO_LEVEL_NORMAL_1V8 YT9218_IO_LEVEL_NORMAL(3) +#define YT921X_MAC_ADDR_HI2 0x80080 +#define YT921X_MAC_ADDR_LO4 0x80084 +#define YT921X_SERDESn(port) (0x8008c + 4 * ((port) - 8)) +#define YT921X_SERDES_MODE_M GENMASK(9, 7) +#define YT921X_SERDES_MODE(x) FIELD_PREP(YT921X_SERDES_MODE_M, (x)) +#define YT921X_SERDES_MODE_SGMII YT921X_SERDES_MODE(0) +#define YT921X_SERDES_MODE_REVSGMII YT921X_SERDES_MODE(1) +#define YT921X_SERDES_MODE_1000BASEX YT921X_SERDES_MODE(2) +#define YT921X_SERDES_MODE_100BASEX YT921X_SERDES_MODE(3) +#define YT921X_SERDES_MODE_2500BASEX YT921X_SERDES_MODE(4) +#define YT921X_SERDES_RX_PAUSE BIT(6) +#define YT921X_SERDES_TX_PAUSE BIT(5) +#define YT921X_SERDES_LINK BIT(4) /* force link */ +#define YT921X_SERDES_DUPLEX_FULL BIT(3) +#define YT921X_SERDES_SPEED_M GENMASK(2, 0) +#define YT921X_SERDES_SPEED(x) FIELD_PREP(YT921X_SERDES_SPEED_M, (x)) +#define YT921X_SERDES_SPEED_10 YT921X_SERDES_SPEED(0) +#define YT921X_SERDES_SPEED_100 YT921X_SERDES_SPEED(1) +#define YT921X_SERDES_SPEED_1000 YT921X_SERDES_SPEED(2) +#define YT921X_SERDES_SPEED_10000 YT921X_SERDES_SPEED(3) +#define YT921X_SERDES_SPEED_2500 YT921X_SERDES_SPEED(4) +#define YT921X_PORTn_CTRL(port) (0x80100 + 4 * (port)) +#define YT921X_PORT_CTRL_PAUSE_AN BIT(10) +#define YT921X_PORTn_STATUS(port) (0x80200 + 4 * (port)) +#define YT921X_PORT_LINK BIT(9) /* CTRL: auto negotiation */ +#define YT921X_PORT_HALF_PAUSE BIT(8) /* Half-duplex back pressure mode */ +#define YT921X_PORT_DUPLEX_FULL BIT(7) +#define YT921X_PORT_RX_PAUSE BIT(6) +#define YT921X_PORT_TX_PAUSE BIT(5) +#define YT921X_PORT_RX_MAC_EN BIT(4) +#define YT921X_PORT_TX_MAC_EN BIT(3) +#define YT921X_PORT_SPEED_M GENMASK(2, 0) +#define YT921X_PORT_SPEED(x) FIELD_PREP(YT921X_PORT_SPEED_M, (x)) +#define YT921X_PORT_SPEED_10 YT921X_PORT_SPEED(0) +#define YT921X_PORT_SPEED_100 YT921X_PORT_SPEED(1) +#define YT921X_PORT_SPEED_1000 YT921X_PORT_SPEED(2) +#define YT921X_PORT_SPEED_10000 YT921X_PORT_SPEED(3) +#define YT921X_PORT_SPEED_2500 YT921X_PORT_SPEED(4) +#define YT921X_PON_STRAP_FUNC 0x80320 +#define YT921X_PON_STRAP_VAL 0x80324 +#define YT921X_PON_STRAP_CAP 0x80328 +#define YT921X_PON_STRAP_EEE BIT(16) +#define YT921X_PON_STRAP_LOOP_DETECT BIT(7) +#define YT921X_MDIO_POLLINGn(port) (0x80364 + 4 * ((port) - 8)) +#define YT921X_MDIO_POLLING_DUPLEX_FULL BIT(4) +#define YT921X_MDIO_POLLING_LINK BIT(3) +#define YT921X_MDIO_POLLING_SPEED_M GENMASK(2, 0) +#define YT921X_MDIO_POLLING_SPEED(x) FIELD_PREP(YT921X_MDIO_POLLING_SPEED_M, (x)) +#define YT921X_MDIO_POLLING_SPEED_10 YT921X_MDIO_POLLING_SPEED(0) +#define YT921X_MDIO_POLLING_SPEED_100 YT921X_MDIO_POLLING_SPEED(1) +#define YT921X_MDIO_POLLING_SPEED_1000 YT921X_MDIO_POLLING_SPEED(2) +#define YT921X_MDIO_POLLING_SPEED_10000 YT921X_MDIO_POLLING_SPEED(3) +#define YT921X_MDIO_POLLING_SPEED_2500 YT921X_MDIO_POLLING_SPEED(4) +#define YT921X_SENSOR 0x8036c +#define YT921X_SENSOR_TEMP BIT(18) +#define YT921X_TEMP 0x80374 +#define YT921X_CHIP_MODE 0x80388 +#define YT921X_CHIP_MODE_MODE GENMASK(1, 0) +#define YT921X_XMII_CTRL 0x80394 +#define YT921X_XMII_CTRL_PORTn(port) BIT(9 - (port)) /* Yes, it's reversed */ +#define YT921X_XMIIn(port) (0x80400 + 8 * ((port) - 8)) +#define YT921X_XMII_MODE_M GENMASK(31, 29) +#define YT921X_XMII_MODE(x) FIELD_PREP(YT921X_XMII_MODE_M, (x)) +#define YT921X_XMII_MODE_MII YT921X_XMII_MODE(0) +#define YT921X_XMII_MODE_REVMII YT921X_XMII_MODE(1) +#define YT921X_XMII_MODE_RMII YT921X_XMII_MODE(2) +#define YT921X_XMII_MODE_REVRMII YT921X_XMII_MODE(3) +#define YT921X_XMII_MODE_RGMII YT921X_XMII_MODE(4) +#define YT921X_XMII_MODE_DISABLE YT921X_XMII_MODE(5) +#define YT921X_XMII_LINK BIT(19) /* force link */ +#define YT921X_XMII_EN BIT(18) +#define YT921X_XMII_SOFT_RST BIT(17) +#define YT921X_XMII_RGMII_TX_DELAY_150PS_M GENMASK(16, 13) +#define YT921X_XMII_RGMII_TX_DELAY_150PS(x) FIELD_PREP(YT921X_XMII_RGMII_TX_DELAY_150PS_M, (x)) +#define YT921X_XMII_TX_CLK_IN BIT(11) +#define YT921X_XMII_RX_CLK_IN BIT(10) +#define YT921X_XMII_RGMII_TX_DELAY_2NS BIT(8) +#define YT921X_XMII_RGMII_TX_CLK_OUT BIT(7) +#define YT921X_XMII_RGMII_RX_DELAY_150PS_M GENMASK(6, 3) +#define YT921X_XMII_RGMII_RX_DELAY_150PS(x) FIELD_PREP(YT921X_XMII_RGMII_RX_DELAY_150PS_M, (x)) +#define YT921X_XMII_RMII_PHY_TX_CLK_OUT BIT(2) +#define YT921X_XMII_REVMII_TX_CLK_OUT BIT(1) +#define YT921X_XMII_REVMII_RX_CLK_OUT BIT(0) + +#define YT921X_MACn_FRAME(port) (0x81008 + 0x1000 * (port)) +#define YT921X_MAC_FRAME_SIZE_M GENMASK(21, 8) +#define YT921X_MAC_FRAME_SIZE(x) FIELD_PREP(YT921X_MAC_FRAME_SIZE_M, (x)) + +#define YT921X_EEEn_VAL(port) (0xa0000 + 0x40 * (port)) +#define YT921X_EEE_VAL_DATA BIT(1) + +#define YT921X_EEE_CTRL 0xb0000 +#define YT921X_EEE_CTRL_ENn(port) BIT(port) + +#define YT921X_MIB_CTRL 0xc0004 +#define YT921X_MIB_CTRL_CLEAN BIT(30) +#define YT921X_MIB_CTRL_PORT_M GENMASK(6, 3) +#define YT921X_MIB_CTRL_PORT(x) FIELD_PREP(YT921X_MIB_CTRL_PORT_M, (x)) +#define YT921X_MIB_CTRL_ONE_PORT BIT(1) +#define YT921X_MIB_CTRL_ALL_PORT BIT(0) +#define YT921X_MIBn_DATA0(port) (0xc0100 + 0x100 * (port)) +#define YT921X_MIBn_DATAm(port, x) (YT921X_MIBn_DATA0(port) + 4 * (x)) +#define YT921X_MIB_DATA_RX_BROADCAST 0x00 +#define YT921X_MIB_DATA_RX_PAUSE 0x04 +#define YT921X_MIB_DATA_RX_MULTICAST 0x08 +#define YT921X_MIB_DATA_RX_CRC_ERR 0x0c + +#define YT921X_MIB_DATA_RX_ALIGN_ERR 0x10 +#define YT921X_MIB_DATA_RX_UNDERSIZE_ERR 0x14 +#define YT921X_MIB_DATA_RX_FRAG_ERR 0x18 +#define YT921X_MIB_DATA_RX_PKT_SZ_64 0x1c + +#define YT921X_MIB_DATA_RX_PKT_SZ_65_TO_127 0x20 +#define YT921X_MIB_DATA_RX_PKT_SZ_128_TO_255 0x24 +#define YT921X_MIB_DATA_RX_PKT_SZ_256_TO_511 0x28 +#define YT921X_MIB_DATA_RX_PKT_SZ_512_TO_1023 0x2c + +#define YT921X_MIB_DATA_RX_PKT_SZ_1024_TO_1518 0x30 +#define YT921X_MIB_DATA_RX_PKT_SZ_1519_TO_MAX 0x34 +/* 0x38: unused */ +#define YT921X_MIB_DATA_RX_GOOD_BYTES 0x3c + +/* 0x40: 64 bytes */ +#define YT921X_MIB_DATA_RX_BAD_BYTES 0x44 +/* 0x48: 64 bytes */ +#define YT921X_MIB_DATA_RX_OVERSIZE_ERR 0x4c + +#define YT921X_MIB_DATA_RX_DROPPED 0x50 +#define YT921X_MIB_DATA_TX_BROADCAST 0x54 +#define YT921X_MIB_DATA_TX_PAUSE 0x58 +#define YT921X_MIB_DATA_TX_MULTICAST 0x5c + +#define YT921X_MIB_DATA_TX_UNDERSIZE_ERR 0x60 +#define YT921X_MIB_DATA_TX_PKT_SZ_64 0x64 +#define YT921X_MIB_DATA_TX_PKT_SZ_65_TO_127 0x68 +#define YT921X_MIB_DATA_TX_PKT_SZ_128_TO_255 0x6c + +#define YT921X_MIB_DATA_TX_PKT_SZ_256_TO_511 0x70 +#define YT921X_MIB_DATA_TX_PKT_SZ_512_TO_1023 0x74 +#define YT921X_MIB_DATA_TX_PKT_SZ_1024_TO_1518 0x78 +#define YT921X_MIB_DATA_TX_PKT_SZ_1519_TO_MAX 0x7c + +/* 0x80: unused */ +#define YT921X_MIB_DATA_TX_GOOD_BYTES 0x84 +/* 0x88: 64 bytes */ +#define YT921X_MIB_DATA_TX_COLLISION 0x8c + +#define YT921X_MIB_DATA_TX_EXCESSIVE_COLLISION 0x90 +#define YT921X_MIB_DATA_TX_MULTIPLE_COLLISION 0x94 +#define YT921X_MIB_DATA_TX_SINGLE_COLLISION 0x98 +#define YT921X_MIB_DATA_TX_PKT 0x9c + +#define YT921X_MIB_DATA_TX_DEFERRED 0xa0 +#define YT921X_MIB_DATA_TX_LATE_COLLISION 0xa4 +#define YT921X_MIB_DATA_RX_OAM 0xa8 +#define YT921X_MIB_DATA_TX_OAM 0xac + +#define YT921X_EDATA_CTRL 0xe0000 +#define YT921X_EDATA_CTRL_ADDR_M GENMASK(15, 8) +#define YT921X_EDATA_CTRL_ADDR(x) FIELD_PREP(YT921X_EDATA_CTRL_ADDR_M, (x)) +#define YT921X_EDATA_CTRL_OP_M GENMASK(3, 0) +#define YT921X_EDATA_CTRL_OP(x) FIELD_PREP(YT921X_EDATA_CTRL_OP_M, (x)) +#define YT921X_EDATA_CTRL_READ YT921X_EDATA_CTRL_OP(5) +#define YT921X_EDATA_DATA 0xe0004 +#define YT921X_EDATA_DATA_DATA_M GENMASK(31, 24) +#define YT921X_EDATA_DATA_STATUS_M GENMASK(3, 0) +#define YT921X_EDATA_DATA_STATUS(x) FIELD_PREP(YT921X_EDATA_DATA_STATUS_M, (x)) +#define YT921X_EDATA_DATA_IDLE YT921X_EDATA_DATA_STATUS(3) + +#define YT921X_EXT_MBUS_OP 0x6a000 +#define YT921X_INT_MBUS_OP 0xf0000 +#define YT921X_MBUS_OP_START BIT(0) +#define YT921X_EXT_MBUS_CTRL 0x6a004 +#define YT921X_INT_MBUS_CTRL 0xf0004 +#define YT921X_MBUS_CTRL_PORT_M GENMASK(25, 21) +#define YT921X_MBUS_CTRL_PORT(x) FIELD_PREP(YT921X_MBUS_CTRL_PORT_M, (x)) +#define YT921X_MBUS_CTRL_REG_M GENMASK(20, 16) +#define YT921X_MBUS_CTRL_REG(x) FIELD_PREP(YT921X_MBUS_CTRL_REG_M, (x)) +#define YT921X_MBUS_CTRL_TYPE_M GENMASK(11, 8) /* wild guess */ +#define YT921X_MBUS_CTRL_TYPE(x) FIELD_PREP(YT921X_MBUS_CTRL_TYPE_M, (x)) +#define YT921X_MBUS_CTRL_TYPE_C22 YT921X_MBUS_CTRL_TYPE(4) +#define YT921X_MBUS_CTRL_OP_M GENMASK(3, 2) /* wild guess */ +#define YT921X_MBUS_CTRL_OP(x) FIELD_PREP(YT921X_MBUS_CTRL_OP_M, (x)) +#define YT921X_MBUS_CTRL_WRITE YT921X_MBUS_CTRL_OP(1) +#define YT921X_MBUS_CTRL_READ YT921X_MBUS_CTRL_OP(2) +#define YT921X_EXT_MBUS_DOUT 0x6a008 +#define YT921X_INT_MBUS_DOUT 0xf0008 +#define YT921X_EXT_MBUS_DIN 0x6a00c +#define YT921X_INT_MBUS_DIN 0xf000c + +#define YT921X_PORTn_EGR(port) (0x100000 + 4 * (port)) +#define YT921X_PORT_EGR_TPID_CTAG_M GENMASK(5, 4) +#define YT921X_PORT_EGR_TPID_CTAG(x) FIELD_PREP(YT921X_PORT_EGR_TPID_CTAG_M, (x)) +#define YT921X_PORT_EGR_TPID_STAG_M GENMASK(3, 2) +#define YT921X_PORT_EGR_TPID_STAG(x) FIELD_PREP(YT921X_PORT_EGR_TPID_STAG_M, (x)) +#define YT921X_TPID_EGRn(x) (0x100300 + 4 * (x)) /* [0, 3] */ +#define YT921X_TPID_EGR_TPID_M GENMASK(15, 0) + +#define YT921X_VLAN_IGR_FILTER 0x180280 +#define YT921X_VLAN_IGR_FILTER_PORTn_BYPASS_IGMP(port) BIT((port) + 11) +#define YT921X_VLAN_IGR_FILTER_PORTn(port) BIT(port) +#define YT921X_PORTn_ISOLATION(port) (0x180294 + 4 * (port)) +#define YT921X_PORT_ISOLATION_BLOCKn(port) BIT(port) +#define YT921X_STPn(n) (0x18038c + 4 * (n)) +#define YT921X_STP_PORTn_M(port) GENMASK(2 * (port) + 1, 2 * (port)) +#define YT921X_STP_PORTn(port, x) ((x) << (2 * (port))) +#define YT921X_STP_PORTn_DISABLED(port) YT921X_STP_PORTn(port, 0) +#define YT921X_STP_PORTn_LEARNING(port) YT921X_STP_PORTn(port, 1) +#define YT921X_STP_PORTn_BLOCKING(port) YT921X_STP_PORTn(port, 2) +#define YT921X_STP_PORTn_FORWARD(port) YT921X_STP_PORTn(port, 3) +#define YT921X_PORTn_LEARN(port) (0x1803d0 + 4 * (port)) +#define YT921X_PORT_LEARN_VID_LEARN_MULTI_EN BIT(22) +#define YT921X_PORT_LEARN_VID_LEARN_MODE BIT(21) +#define YT921X_PORT_LEARN_VID_LEARN_EN BIT(20) +#define YT921X_PORT_LEARN_SUSPEND_COPY_EN BIT(19) +#define YT921X_PORT_LEARN_SUSPEND_DROP_EN BIT(18) +#define YT921X_PORT_LEARN_DIS BIT(17) +#define YT921X_PORT_LEARN_LIMIT_EN BIT(16) +#define YT921X_PORT_LEARN_LIMIT_M GENMASK(15, 8) +#define YT921X_PORT_LEARN_LIMIT(x) FIELD_PREP(YT921X_PORT_LEARN_LIMIT_M, (x)) +#define YT921X_PORT_LEARN_DROP_ON_EXCEEDED BIT(2) +#define YT921X_PORT_LEARN_MODE_M GENMASK(1, 0) +#define YT921X_PORT_LEARN_MODE(x) FIELD_PREP(YT921X_PORT_LEARN_MODE_M, (x)) +#define YT921X_PORT_LEARN_MODE_AUTO YT921X_PORT_LEARN_MODE(0) +#define YT921X_PORT_LEARN_MODE_AUTO_AND_COPY YT921X_PORT_LEARN_MODE(1) +#define YT921X_PORT_LEARN_MODE_CPU_CONTROL YT921X_PORT_LEARN_MODE(2) +#define YT921X_AGEING 0x180440 +#define YT921X_AGEING_INTERVAL_M GENMASK(15, 0) +#define YT921X_FDB_IN0 0x180454 +#define YT921X_FDB_IN1 0x180458 +#define YT921X_FDB_IN2 0x18045c +#define YT921X_FDB_OP 0x180460 +#define YT921X_FDB_OP_INDEX_M GENMASK(22, 11) +#define YT921X_FDB_OP_INDEX(x) FIELD_PREP(YT921X_FDB_OP_INDEX_M, (x)) +#define YT921X_FDB_OP_MODE_INDEX BIT(10) /* mac+fid / index */ +#define YT921X_FDB_OP_FLUSH_MCAST BIT(9) /* ucast / mcast */ +#define YT921X_FDB_OP_FLUSH_M GENMASK(8, 7) +#define YT921X_FDB_OP_FLUSH(x) FIELD_PREP(YT921X_FDB_OP_FLUSH_M, (x)) +#define YT921X_FDB_OP_FLUSH_ALL YT921X_FDB_OP_FLUSH(0) +#define YT921X_FDB_OP_FLUSH_PORT YT921X_FDB_OP_FLUSH(1) +#define YT921X_FDB_OP_FLUSH_PORT_VID YT921X_FDB_OP_FLUSH(2) +#define YT921X_FDB_OP_FLUSH_VID YT921X_FDB_OP_FLUSH(3) +#define YT921X_FDB_OP_FLUSH_STATIC BIT(6) +#define YT921X_FDB_OP_NEXT_TYPE_M GENMASK(5, 4) +#define YT921X_FDB_OP_NEXT_TYPE(x) FIELD_PREP(YT921X_FDB_OP_NEXT_TYPE_M, (x)) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST_PORT YT921X_FDB_OP_NEXT_TYPE(0) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST_VID YT921X_FDB_OP_NEXT_TYPE(1) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST YT921X_FDB_OP_NEXT_TYPE(2) +#define YT921X_FDB_OP_NEXT_TYPE_MCAST YT921X_FDB_OP_NEXT_TYPE(3) +#define YT921X_FDB_OP_OP_M GENMASK(3, 1) +#define YT921X_FDB_OP_OP(x) FIELD_PREP(YT921X_FDB_OP_OP_M, (x)) +#define YT921X_FDB_OP_OP_ADD YT921X_FDB_OP_OP(0) +#define YT921X_FDB_OP_OP_DEL YT921X_FDB_OP_OP(1) +#define YT921X_FDB_OP_OP_GET_ONE YT921X_FDB_OP_OP(2) +#define YT921X_FDB_OP_OP_GET_NEXT YT921X_FDB_OP_OP(3) +#define YT921X_FDB_OP_OP_FLUSH YT921X_FDB_OP_OP(4) +#define YT921X_FDB_OP_START BIT(0) +#define YT921X_FDB_RESULT 0x180464 +#define YT921X_FDB_RESULT_DONE BIT(15) +#define YT921X_FDB_RESULT_NOTFOUND BIT(14) +#define YT921X_FDB_RESULT_OVERWRITED BIT(13) +#define YT921X_FDB_RESULT_INDEX_M GENMASK(11, 0) +#define YT921X_FDB_RESULT_INDEX(x) FIELD_PREP(YT921X_FDB_RESULT_INDEX_M, (x)) +#define YT921X_FDB_OUT0 0x1804b0 +#define YT921X_FDB_IO0_ADDR_HI4_M GENMASK(31, 0) +#define YT921X_FDB_OUT1 0x1804b4 +#define YT921X_FDB_IO1_EGR_INT_PRI_EN BIT(31) +#define YT921X_FDB_IO1_STATUS_M GENMASK(30, 28) +#define YT921X_FDB_IO1_STATUS(x) FIELD_PREP(YT921X_FDB_IO1_STATUS_M, (x)) +#define YT921X_FDB_IO1_STATUS_INVALID YT921X_FDB_IO1_STATUS(0) +#define YT921X_FDB_IO1_STATUS_MIN_TIME YT921X_FDB_IO1_STATUS(1) +#define YT921X_FDB_IO1_STATUS_MOVE_AGING_MAX_TIME YT921X_FDB_IO1_STATUS(3) +#define YT921X_FDB_IO1_STATUS_MAX_TIME YT921X_FDB_IO1_STATUS(5) +#define YT921X_FDB_IO1_STATUS_PENDING YT921X_FDB_IO1_STATUS(6) +#define YT921X_FDB_IO1_STATUS_STATIC YT921X_FDB_IO1_STATUS(7) +#define YT921X_FDB_IO1_FID_M GENMASK(27, 16) /* filtering ID (VID) */ +#define YT921X_FDB_IO1_FID(x) FIELD_PREP(YT921X_FDB_IO1_FID_M, (x)) +#define YT921X_FDB_IO1_ADDR_LO2_M GENMASK(15, 0) +#define YT921X_FDB_OUT2 0x1804b8 +#define YT921X_FDB_IO2_MOVE_AGING_STATUS_M GENMASK(31, 30) +#define YT921X_FDB_IO2_IGR_DROP BIT(29) +#define YT921X_FDB_IO2_EGR_PORTS_M GENMASK(28, 18) +#define YT921X_FDB_IO2_EGR_PORTS(x) FIELD_PREP(YT921X_FDB_IO2_EGR_PORTS_M, (x)) +#define YT921X_FDB_IO2_EGR_DROP BIT(17) +#define YT921X_FDB_IO2_COPY_TO_CPU BIT(16) +#define YT921X_FDB_IO2_IGR_INT_PRI_EN BIT(15) +#define YT921X_FDB_IO2_INT_PRI_M GENMASK(14, 12) +#define YT921X_FDB_IO2_INT_PRI(x) FIELD_PREP(YT921X_FDB_IO2_INT_PRI_M, (x)) +#define YT921X_FDB_IO2_NEW_VID_M GENMASK(11, 0) +#define YT921X_FDB_IO2_NEW_VID(x) FIELD_PREP(YT921X_FDB_IO2_NEW_VID_M, (x)) +#define YT921X_FILTER_UNK_UCAST 0x180508 +#define YT921X_FILTER_UNK_MCAST 0x18050c +#define YT921X_FILTER_MCAST 0x180510 +#define YT921X_FILTER_BCAST 0x180514 +#define YT921X_FILTER_PORTS_M GENMASK(10, 0) +#define YT921X_FILTER_PORTS(x) FIELD_PREP(YT921X_FILTER_PORTS_M, (x)) +#define YT921X_FILTER_PORTn(port) BIT(port) +#define YT921X_VLAN_EGR_FILTER 0x180598 +#define YT921X_VLAN_EGR_FILTER_PORTn(port) BIT(port) +#define YT921X_CPU_COPY 0x180690 +#define YT921X_CPU_COPY_FORCE_INT_PORT BIT(2) +#define YT921X_CPU_COPY_TO_INT_CPU BIT(1) +#define YT921X_CPU_COPY_TO_EXT_CPU BIT(0) +#define YT921X_ACT_UNK_UCAST 0x180734 +#define YT921X_ACT_UNK_MCAST 0x180738 +#define YT921X_ACT_UNK_MCAST_BYPASS_DROP_RMA BIT(23) +#define YT921X_ACT_UNK_MCAST_BYPASS_DROP_IGMP BIT(22) +#define YT921X_ACT_UNK_ACTn_M(port) GENMASK(2 * (port) + 1, 2 * (port)) +#define YT921X_ACT_UNK_ACTn(port, x) ((x) << (2 * (port))) +#define YT921X_ACT_UNK_ACTn_FORWARD(port) YT921X_ACT_UNK_ACTn(port, 0) /* flood */ +#define YT921X_ACT_UNK_ACTn_TRAP(port) YT921X_ACT_UNK_ACTn(port, 1) /* steer to CPU */ +#define YT921X_ACT_UNK_ACTn_DROP(port) YT921X_ACT_UNK_ACTn(port, 2) /* discard */ +/* NEVER use this action; see comments in the tag driver */ +#define YT921X_ACT_UNK_ACTn_COPY(port) YT921X_ACT_UNK_ACTn(port, 3) /* flood and copy */ +#define YT921X_FDB_HW_FLUSH 0x180958 +#define YT921X_FDB_HW_FLUSH_ON_LINKDOWN BIT(0) + +#define YT921X_VLANn_CTRL(vlan) (0x188000 + 8 * (vlan)) +#define YT921X_VLAN_CTRL_UNTAG_PORTS_M GENMASK_ULL(50, 40) +#define YT921X_VLAN_CTRL_UNTAG_PORTS(x) FIELD_PREP(YT921X_VLAN_CTRL_UNTAG_PORTS_M, (x)) +#define YT921X_VLAN_CTRL_UNTAG_PORTn(port) BIT_ULL((port) + 40) +#define YT921X_VLAN_CTRL_STP_ID_M GENMASK_ULL(39, 36) +#define YT921X_VLAN_CTRL_STP_ID(x) FIELD_PREP(YT921X_VLAN_CTRL_STP_ID_M, (x)) +#define YT921X_VLAN_CTRL_SVLAN_EN BIT_ULL(35) +#define YT921X_VLAN_CTRL_FID_M GENMASK_ULL(34, 23) +#define YT921X_VLAN_CTRL_FID(x) FIELD_PREP(YT921X_VLAN_CTRL_FID_M, (x)) +#define YT921X_VLAN_CTRL_LEARN_DIS BIT_ULL(22) +#define YT921X_VLAN_CTRL_INT_PRI_EN BIT_ULL(21) +#define YT921X_VLAN_CTRL_INT_PRI_M GENMASK_ULL(20, 18) +#define YT921X_VLAN_CTRL_PORTS_M GENMASK_ULL(17, 7) +#define YT921X_VLAN_CTRL_PORTS(x) FIELD_PREP(YT921X_VLAN_CTRL_PORTS_M, (x)) +#define YT921X_VLAN_CTRL_PORTn(port) BIT_ULL((port) + 7) +#define YT921X_VLAN_CTRL_BYPASS_1X_AC BIT_ULL(6) +#define YT921X_VLAN_CTRL_METER_EN BIT_ULL(5) +#define YT921X_VLAN_CTRL_METER_ID_M GENMASK_ULL(4, 0) + +#define YT921X_TPID_IGRn(x) (0x210000 + 4 * (x)) /* [0, 3] */ +#define YT921X_TPID_IGR_TPID_M GENMASK(15, 0) +#define YT921X_PORTn_IGR_TPID(port) (0x210010 + 4 * (port)) +#define YT921X_PORT_IGR_TPIDn_STAG_M GENMASK(7, 4) +#define YT921X_PORT_IGR_TPIDn_STAG(x) BIT((x) + 4) +#define YT921X_PORT_IGR_TPIDn_CTAG_M GENMASK(3, 0) +#define YT921X_PORT_IGR_TPIDn_CTAG(x) BIT(x) + +#define YT921X_PORTn_VLAN_CTRL(port) (0x230010 + 4 * (port)) +#define YT921X_PORT_VLAN_CTRL_SVLAN_PRI_EN BIT(31) +#define YT921X_PORT_VLAN_CTRL_CVLAN_PRI_EN BIT(30) +#define YT921X_PORT_VLAN_CTRL_SVID_M GENMASK(29, 18) +#define YT921X_PORT_VLAN_CTRL_SVID(x) FIELD_PREP(YT921X_PORT_VLAN_CTRL_SVID_M, (x)) +#define YT921X_PORT_VLAN_CTRL_CVID_M GENMASK(17, 6) +#define YT921X_PORT_VLAN_CTRL_CVID(x) FIELD_PREP(YT921X_PORT_VLAN_CTRL_CVID_M, (x)) +#define YT921X_PORT_VLAN_CTRL_SVLAN_PRI_M GENMASK(5, 3) +#define YT921X_PORT_VLAN_CTRL_CVLAN_PRI_M GENMASK(2, 0) +#define YT921X_PORTn_VLAN_CTRL1(port) (0x230080 + 4 * (port)) +#define YT921X_PORT_VLAN_CTRL1_VLAN_RANGE_EN BIT(8) +#define YT921X_PORT_VLAN_CTRL1_VLAN_RANGE_PROFILE_ID_M GENMASK(7, 4) +#define YT921X_PORT_VLAN_CTRL1_SVLAN_DROP_TAGGED BIT(3) +#define YT921X_PORT_VLAN_CTRL1_SVLAN_DROP_UNTAGGED BIT(2) +#define YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_TAGGED BIT(1) +#define YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED BIT(0) + +#define YT921X_MIRROR 0x300300 +#define YT921X_MIRROR_IGR_PORTS_M GENMASK(26, 16) +#define YT921X_MIRROR_IGR_PORTS(x) FIELD_PREP(YT921X_MIRROR_IGR_PORTS_M, (x)) +#define YT921X_MIRROR_IGR_PORTn(port) BIT((port) + 16) +#define YT921X_MIRROR_EGR_PORTS_M GENMASK(14, 4) +#define YT921X_MIRROR_EGR_PORTS(x) FIELD_PREP(YT921X_MIRROR_EGR_PORTS_M, (x)) +#define YT921X_MIRROR_EGR_PORTn(port) BIT((port) + 4) +#define YT921X_MIRROR_PORT_M GENMASK(3, 0) +#define YT921X_MIRROR_PORT(x) FIELD_PREP(YT921X_MIRROR_PORT_M, (x)) + +#define YT921X_EDATA_EXTMODE 0xfb +#define YT921X_EDATA_LEN 0x100 + +#define YT921X_FDB_NUM 4096 + +enum yt921x_fdb_entry_status { + YT921X_FDB_ENTRY_STATUS_INVALID = 0, + YT921X_FDB_ENTRY_STATUS_MIN_TIME = 1, + YT921X_FDB_ENTRY_STATUS_MOVE_AGING_MAX_TIME = 3, + YT921X_FDB_ENTRY_STATUS_MAX_TIME = 5, + YT921X_FDB_ENTRY_STATUS_PENDING = 6, + YT921X_FDB_ENTRY_STATUS_STATIC = 7, +}; + +#define YT921X_MSTI_NUM 16 + +#define YT9215_MAJOR 0x9002 +#define YT9218_MAJOR 0x9001 + +/* required for a hard reset */ +#define YT921X_RST_DELAY_US 10000 + +#define YT921X_FRAME_SIZE_MAX 0x2400 /* 9216 */ + +#define YT921X_TAG_LEN 8 + +/* 8 internal + 2 external + 1 mcu */ +#define YT921X_PORT_NUM 11 + +#define yt921x_port_is_internal(port) ((port) < 8) +#define yt921x_port_is_external(port) (8 <= (port) && (port) < 9) + +struct yt921x_mib { + u64 rx_broadcast; + u64 rx_pause; + u64 rx_multicast; + u64 rx_crc_errors; + + u64 rx_alignment_errors; + u64 rx_undersize_errors; + u64 rx_fragment_errors; + u64 rx_64byte; + + u64 rx_65_127byte; + u64 rx_128_255byte; + u64 rx_256_511byte; + u64 rx_512_1023byte; + + u64 rx_1024_1518byte; + u64 rx_jumbo; + u64 rx_good_bytes; + + u64 rx_bad_bytes; + u64 rx_oversize_errors; + + u64 rx_dropped; + u64 tx_broadcast; + u64 tx_pause; + u64 tx_multicast; + + u64 tx_undersize_errors; + u64 tx_64byte; + u64 tx_65_127byte; + u64 tx_128_255byte; + + u64 tx_256_511byte; + u64 tx_512_1023byte; + u64 tx_1024_1518byte; + u64 tx_jumbo; + + u64 tx_good_bytes; + u64 tx_collisions; + + u64 tx_aborted_errors; + u64 tx_multiple_collisions; + u64 tx_single_collisions; + u64 tx_good; + + u64 tx_deferred; + u64 tx_late_collisions; + u64 rx_oam; + u64 tx_oam; +}; + +struct yt921x_port { + unsigned char index; + + bool hairpin; + bool isolated; + + struct delayed_work mib_read; + struct yt921x_mib mib; + u64 rx_frames; + u64 tx_frames; +}; + +struct yt921x_reg_ops { + int (*read)(void *context, u32 reg, u32 *valp); + int (*write)(void *context, u32 reg, u32 val); +}; + +struct yt921x_priv { + struct dsa_switch ds; + + const struct yt921x_info *info; + /* cache of dsa_cpu_ports(ds) */ + u16 cpu_ports_mask; + + /* protect the access to the switch registers */ + struct mutex reg_lock; + const struct yt921x_reg_ops *reg_ops; + void *reg_ctx; + + /* mdio master bus */ + struct mii_bus *mbus_int; + struct mii_bus *mbus_ext; + + struct yt921x_port ports[YT921X_PORT_NUM]; + + u16 eee_ports_mask; +}; + +#endif |