diff options
Diffstat (limited to 'drivers/net/dsa')
95 files changed, 11857 insertions, 4100 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 2d10b4d6cfbb..7eb301fd987d 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -26,17 +26,12 @@ config NET_DSA_LOOP source "drivers/net/dsa/hirschmann/Kconfig" -config NET_DSA_LANTIQ_GSWIP - tristate "Lantiq / Intel GSWIP" - depends on HAS_IOMEM - select NET_DSA_TAG_GSWIP - help - This enables support for the Lantiq / Intel GSWIP 2.1 found in - the xrx200 / VR9 SoC. +source "drivers/net/dsa/lantiq/Kconfig" config NET_DSA_MT7530 tristate "MediaTek MT7530 and MT7531 Ethernet switch support" select NET_DSA_TAG_MTK + select REGMAP_IRQ imply NET_DSA_MT7530_MDIO imply NET_DSA_MT7530_MMIO help @@ -91,13 +86,21 @@ source "drivers/net/dsa/realtek/Kconfig" config NET_DSA_RZN1_A5PSW tristate "Renesas RZ/N1 A5PSW Ethernet switch support" - depends on OF && ARCH_RZN1 + depends on OF && (ARCH_RZN1 || COMPILE_TEST) select NET_DSA_TAG_RZN1_A5PSW select PCS_RZN1_MIIC help This driver supports the A5PSW switch, which is embedded in Renesas RZ/N1 SoC. +config NET_DSA_KS8995 + tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches" + depends on SPI + select NET_DSA_TAG_NONE + help + This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet + switches, managed over SPI. + config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 @@ -151,4 +154,11 @@ config NET_DSA_VITESSE_VSC73XX_PLATFORM This enables support for the Vitesse VSC7385, VSC7388, VSC7395 and VSC7398 SparX integrated ethernet switches, connected over a CPU-attached address bus and work in memory-mapped I/O mode. + +config NET_DSA_YT921X + tristate "Motorcomm YT9215 ethernet switch chip support" + select NET_DSA_TAG_YT921X + help + This enables support for the Motorcomm YT9215 ethernet switch + chip. endmenu diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index cb9a97340e58..16de4ba3fa38 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -2,10 +2,7 @@ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o -ifdef CONFIG_NET_DSA_LOOP -obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o -endif -obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o +obj-$(CONFIG_NET_DSA_KS8995) += ks8995.o obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o @@ -17,8 +14,10 @@ obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx-core.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM) += vitesse-vsc73xx-platform.o obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o +obj-$(CONFIG_NET_DSA_YT921X) += yt921x.o obj-y += b53/ obj-y += hirschmann/ +obj-y += lantiq/ obj-y += microchip/ obj-y += mv88e6xxx/ obj-y += ocelot/ diff --git a/drivers/net/dsa/b53/Kconfig b/drivers/net/dsa/b53/Kconfig index ebaa4a80d544..915008e8eff5 100644 --- a/drivers/net/dsa/b53/Kconfig +++ b/drivers/net/dsa/b53/Kconfig @@ -5,6 +5,7 @@ menuconfig B53 select NET_DSA_TAG_NONE select NET_DSA_TAG_BRCM select NET_DSA_TAG_BRCM_LEGACY + select NET_DSA_TAG_BRCM_LEGACY_FCS select NET_DSA_TAG_BRCM_PREPEND help This driver adds support for Broadcom managed switch chips. It supports diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 285785c942b0..a1a177713d99 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -21,6 +21,8 @@ #include <linux/export.h> #include <linux/gpio.h> #include <linux/kernel.h> +#include <linux/math.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/platform_data/b53.h> #include <linux/phy.h> @@ -326,6 +328,26 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, } } +static void b53_set_eap_mode(struct b53_device *dev, int port, int mode) +{ + u64 eap_conf; + + if (is5325(dev) || is5365(dev) || dev->chip_id == BCM5389_DEVICE_ID) + return; + + b53_read64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), &eap_conf); + + if (is63xx(dev)) { + eap_conf &= ~EAP_MODE_MASK_63XX; + eap_conf |= (u64)mode << EAP_MODE_SHIFT_63XX; + } else { + eap_conf &= ~EAP_MODE_MASK; + eap_conf |= (u64)mode << EAP_MODE_SHIFT; + } + + b53_write64(dev, B53_EAP_PAGE, B53_PORT_EAP_CONF(port), eap_conf); +} + static void b53_set_forwarding(struct b53_device *dev, int enable) { u8 mgmt; @@ -339,18 +361,23 @@ static void b53_set_forwarding(struct b53_device *dev, int enable) b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); - /* Include IMP port in dumb forwarding mode - */ - b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); - mgmt |= B53_MII_DUMB_FWDG_EN; - b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); + if (!is5325(dev)) { + /* Include IMP port in dumb forwarding mode */ + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); + mgmt |= B53_MII_DUMB_FWDG_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); - /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether - * frames should be flooded or not. - */ - b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); - mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN; - b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether + * frames should be flooded or not. + */ + b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); + mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IP_MC; + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + } else { + b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); + mgmt |= B53_IP_MC; + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); + } } static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, @@ -373,15 +400,17 @@ static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); } + vc1 &= ~VC1_RX_MCST_FWD_EN; + if (enable) { vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; - vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; + vc1 |= VC1_RX_MCST_UNTAG_EN; vc4 &= ~VC4_ING_VID_CHECK_MASK; if (enable_filtering) { vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; vc5 |= VC5_DROP_VTABLE_MISS; } else { - vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + vc4 |= VC4_NO_ING_VID_CHK << VC4_ING_VID_CHECK_S; vc5 &= ~VC5_DROP_VTABLE_MISS; } @@ -393,7 +422,7 @@ static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, } else { vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); - vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); + vc1 &= ~VC1_RX_MCST_UNTAG_EN; vc4 &= ~VC4_ING_VID_CHECK_MASK; vc5 &= ~VC5_DROP_VTABLE_MISS; @@ -463,6 +492,9 @@ static int b53_flush_arl(struct b53_device *dev, u8 mask) { unsigned int i; + if (is5325(dev)) + return 0; + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); @@ -487,6 +519,9 @@ out: static int b53_fast_age_port(struct b53_device *dev, int port) { + if (is5325(dev)) + return 0; + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); return b53_flush_arl(dev, FAST_AGE_PORT); @@ -494,6 +529,9 @@ static int b53_fast_age_port(struct b53_device *dev, int port) static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) { + if (is5325(dev)) + return 0; + b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); return b53_flush_arl(dev, FAST_AGE_VLAN); @@ -505,6 +543,10 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) unsigned int i; u16 pvlan; + /* BCM5325 CPU port is at 8 */ + if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25) + cpu_port = B53_CPU_PORT; + /* Enable the IMP port to be in the same VLAN as the other ports * on a per-port basis such that we only have Port i and IMP in * the same VLAN. @@ -522,12 +564,24 @@ static void b53_port_set_ucast_flood(struct b53_device *dev, int port, { u16 uc; - b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); - if (unicast) - uc |= BIT(port); - else - uc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); + if (is5325(dev)) { + if (port == B53_CPU_PORT_25) + port = B53_CPU_PORT; + + b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, &uc); + if (unicast) + uc |= BIT(port) | B53_IEEE_UCAST_DROP_EN; + else + uc &= ~BIT(port); + b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_UCAST_DLF, uc); + } else { + b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); + if (unicast) + uc |= BIT(port); + else + uc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); + } } static void b53_port_set_mcast_flood(struct b53_device *dev, int port, @@ -535,19 +589,31 @@ static void b53_port_set_mcast_flood(struct b53_device *dev, int port, { u16 mc; - b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); - if (multicast) - mc |= BIT(port); - else - mc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); + if (is5325(dev)) { + if (port == B53_CPU_PORT_25) + port = B53_CPU_PORT; - b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); - if (multicast) - mc |= BIT(port); - else - mc &= ~BIT(port); - b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); + b53_read16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, &mc); + if (multicast) + mc |= BIT(port) | B53_IEEE_MCAST_DROP_EN; + else + mc &= ~BIT(port); + b53_write16(dev, B53_IEEE_PAGE, B53_IEEE_MCAST_DLF, mc); + } else { + b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); + + b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); + } } static void b53_port_set_learning(struct b53_device *dev, int port, @@ -555,6 +621,9 @@ static void b53_port_set_learning(struct b53_device *dev, int port, { u16 reg; + if (is5325(dev)) + return; + b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®); if (learning) reg &= ~BIT(port); @@ -563,6 +632,25 @@ static void b53_port_set_learning(struct b53_device *dev, int port, b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); } +static void b53_port_set_isolated(struct b53_device *dev, int port, + bool isolated) +{ + u8 offset; + u16 reg; + + if (is5325(dev)) + offset = B53_PROTECTED_PORT_SEL_25; + else + offset = B53_PROTECTED_PORT_SEL; + + b53_read16(dev, B53_CTRL_PAGE, offset, ®); + if (isolated) + reg |= BIT(port); + else + reg &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, offset, reg); +} + static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) { struct b53_device *dev = ds->priv; @@ -576,6 +664,39 @@ static void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); } +int b53_setup_port(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + + b53_port_set_ucast_flood(dev, port, true); + b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); + b53_port_set_isolated(dev, port, false); + + /* Force all traffic to go to the CPU port to prevent the ASIC from + * trying to forward to bridged ports on matching FDB entries, then + * dropping frames because it isn't allowed to forward there. + */ + if (dsa_is_user_port(ds, port)) + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + + if (is5325(dev) && + in_range(port, 1, 4)) { + u8 reg; + + b53_read8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, ®); + reg &= ~PD_MODE_POWER_DOWN_PORT(0); + if (dsa_is_unused_port(ds, port)) + reg |= PD_MODE_POWER_DOWN_PORT(port); + else + reg &= ~PD_MODE_POWER_DOWN_PORT(port); + b53_write8(dev, B53_CTRL_PAGE, B53_PD_MODE_CTRL_25, reg); + } + + return 0; +} +EXPORT_SYMBOL(b53_setup_port); + int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) { struct b53_device *dev = ds->priv; @@ -588,9 +709,8 @@ int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - b53_port_set_ucast_flood(dev, port, true); - b53_port_set_mcast_flood(dev, port, true); - b53_port_set_learning(dev, port, false); + if (dev->ops->phy_enable) + dev->ops->phy_enable(dev, port); if (dev->ops->irq_enable) ret = dev->ops->irq_enable(dev, port); @@ -630,6 +750,9 @@ void b53_disable_port(struct dsa_switch *ds, int port) reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); + if (dev->ops->phy_disable) + dev->ops->phy_disable(dev, port); + if (dev->ops->irq_disable) dev->ops->irq_disable(dev, port); } @@ -674,6 +797,11 @@ void b53_brcm_hdr_setup(struct dsa_switch *ds, int port) hdr_ctl |= GC_FRM_MGMT_PORT_M; b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl); + /* B53_BRCM_HDR not present on devices with legacy tags */ + if (dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY || + dev->tag_protocol == DSA_TAG_PROTO_BRCM_LEGACY_FCS) + return; + /* Enable Broadcom tags for IMP port */ b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl); if (tag_en) @@ -722,10 +850,6 @@ static void b53_enable_cpu_port(struct b53_device *dev, int port) b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); b53_brcm_hdr_setup(dev->ds, port); - - b53_port_set_ucast_flood(dev, port, true); - b53_port_set_mcast_flood(dev, port, true); - b53_port_set_learning(dev, port, false); } static void b53_enable_mib(struct b53_device *dev) @@ -737,12 +861,18 @@ static void b53_enable_mib(struct b53_device *dev) b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); } +static void b53_enable_stp(struct b53_device *dev) +{ + u8 gc; + + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + gc |= GC_RX_BPDU_EN; + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); +} + static u16 b53_default_pvid(struct b53_device *dev) { - if (is5325(dev) || is5365(dev)) - return 1; - else - return 0; + return 0; } static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) @@ -752,6 +882,22 @@ static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); } +static bool b53_vlan_port_may_join_untagged(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + struct dsa_port *dp; + + if (!dev->vlan_filtering) + return true; + + dp = dsa_to_port(ds, port); + + if (dsa_port_is_cpu(dp)) + return true; + + return dp->bridge == NULL; +} + int b53_configure_vlan(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; @@ -770,7 +916,7 @@ int b53_configure_vlan(struct dsa_switch *ds) b53_do_vlan_op(dev, VTA_CMD_CLEAR); } - b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); + b53_enable_vlan(dev, -1, dev->vlan_enabled, dev->vlan_filtering); /* Create an untagged VLAN entry for the default PVID in case * CONFIG_VLAN_8021Q is disabled and there are no calls to @@ -778,26 +924,39 @@ int b53_configure_vlan(struct dsa_switch *ds) * entry. Do this only when the tagging protocol is not * DSA_TAG_PROTO_NONE */ + v = &dev->vlans[def_vid]; b53_for_each_port(dev, i) { - v = &dev->vlans[def_vid]; - v->members |= BIT(i); + if (!b53_vlan_port_may_join_untagged(ds, i)) + continue; + + vl.members |= BIT(i); if (!b53_vlan_port_needs_forced_tagged(ds, i)) - v->untag = v->members; - b53_write16(dev, B53_VLAN_PAGE, - B53_VLAN_PORT_DEF_TAG(i), def_vid); + vl.untag = vl.members; + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(i), + def_vid); } + b53_set_vlan_entry(dev, def_vid, &vl); - /* Upon initial call we have not set-up any VLANs, but upon - * system resume, we need to restore all VLAN entries. - */ - for (vid = def_vid; vid < dev->num_vlans; vid++) { - v = &dev->vlans[vid]; + if (dev->vlan_filtering) { + /* Upon initial call we have not set-up any VLANs, but upon + * system resume, we need to restore all VLAN entries. + */ + for (vid = def_vid + 1; vid < dev->num_vlans; vid++) { + v = &dev->vlans[vid]; - if (!v->members) - continue; + if (!v->members) + continue; - b53_set_vlan_entry(dev, vid, v); - b53_fast_age_vlan(dev, vid); + b53_set_vlan_entry(dev, vid, v); + b53_fast_age_vlan(dev, vid); + } + + b53_for_each_port(dev, i) { + if (!dsa_is_cpu_port(ds, i)) + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), + dev->ports[i].pvid); + } } return 0; @@ -876,6 +1035,7 @@ static int b53_switch_reset(struct b53_device *dev) } b53_enable_mib(dev); + b53_enable_stp(dev); return b53_flush_arl(dev, FAST_AGE_STATIC); } @@ -1115,7 +1275,9 @@ EXPORT_SYMBOL(b53_setup_devlink_resources); static int b53_setup(struct dsa_switch *ds) { struct b53_device *dev = ds->priv; + struct b53_vlan *vl; unsigned int port; + u16 pvid; int ret; /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set @@ -1123,12 +1285,36 @@ static int b53_setup(struct dsa_switch *ds) */ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; + /* The switch does not tell us the original VLAN for untagged + * packets, so keep the CPU port always tagged. + */ + ds->untag_vlan_aware_bridge_pvid = true; + + if (dev->chip_id == BCM53101_DEVICE_ID) { + /* BCM53101 uses 0.5 second increments */ + ds->ageing_time_min = 1 * 500; + ds->ageing_time_max = AGE_TIME_MAX * 500; + } else { + /* Everything else uses 1 second increments */ + ds->ageing_time_min = 1 * 1000; + ds->ageing_time_max = AGE_TIME_MAX * 1000; + } + ret = b53_reset_switch(dev); if (ret) { dev_err(ds->dev, "failed to reset switch\n"); return ret; } + /* setup default vlan for filtering mode */ + pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + b53_for_each_port(dev, port) { + vl->members |= BIT(port); + if (!b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag |= BIT(port); + } + b53_reset_mib(dev); ret = b53_apply_config(dev); @@ -1163,6 +1349,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link) if (port == dev->imp_port) { off = B53_PORT_OVERRIDE_CTRL; val = PORT_OVERRIDE_EN; + } else if (is5325(dev)) { + return; } else { off = B53_GMII_PORT_OVERRIDE_CTRL(port); val = GMII_PO_EN; @@ -1187,6 +1375,8 @@ static void b53_force_port_config(struct b53_device *dev, int port, if (port == dev->imp_port) { off = B53_PORT_OVERRIDE_CTRL; val = PORT_OVERRIDE_EN; + } else if (is5325(dev)) { + return; } else { off = B53_GMII_PORT_OVERRIDE_CTRL(port); val = GMII_PO_EN; @@ -1199,6 +1389,10 @@ static void b53_force_port_config(struct b53_device *dev, int port, else reg &= ~PORT_OVERRIDE_FULL_DUPLEX; + reg &= ~(0x3 << GMII_PO_SPEED_S); + if (is5301x(dev) || is58xx(dev)) + reg &= ~PORT_OVERRIDE_SPEED_2000M; + switch (speed) { case 2000: reg |= PORT_OVERRIDE_SPEED_2000M; @@ -1217,10 +1411,24 @@ static void b53_force_port_config(struct b53_device *dev, int port, return; } - if (rx_pause) - reg |= PORT_OVERRIDE_RX_FLOW; - if (tx_pause) - reg |= PORT_OVERRIDE_TX_FLOW; + if (is5325(dev)) + reg &= ~PORT_OVERRIDE_LP_FLOW_25; + else + reg &= ~(PORT_OVERRIDE_RX_FLOW | PORT_OVERRIDE_TX_FLOW); + + if (rx_pause) { + if (is5325(dev)) + reg |= PORT_OVERRIDE_LP_FLOW_25; + else + reg |= PORT_OVERRIDE_RX_FLOW; + } + + if (tx_pause) { + if (is5325(dev)) + reg |= PORT_OVERRIDE_LP_FLOW_25; + else + reg |= PORT_OVERRIDE_TX_FLOW; + } b53_write8(dev, B53_CTRL_PAGE, off, reg); } @@ -1229,41 +1437,17 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port, phy_interface_t interface) { struct b53_device *dev = ds->priv; - u8 rgmii_ctrl = 0, off; + u8 rgmii_ctrl = 0; - if (port == dev->imp_port) - off = B53_RGMII_CTRL_IMP; - else - off = B53_RGMII_CTRL_P(port); - - b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); - - switch (interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC); - rgmii_ctrl |= RGMII_CTRL_DLL_RXC; - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC); - rgmii_ctrl |= RGMII_CTRL_DLL_TXC; - break; - case PHY_INTERFACE_MODE_RGMII: - default: - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - break; - } + b53_read8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); - if (port != dev->imp_port) { - if (is63268(dev)) - rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; + if (is6318_268(dev)) + rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; - rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - } + rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; - b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + b53_write8(dev, B53_CTRL_PAGE, B53_RGMII_CTRL_P(port), rgmii_ctrl); dev_dbg(ds->dev, "Configured port %d for %s\n", port, phy_modes(interface)); @@ -1284,8 +1468,7 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port, * tx_clk aligned timing (restoring to reset defaults) */ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); - rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | - RGMII_CTRL_TIMING_SEL); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make * sure that we enable the port TX clock internal delay to @@ -1305,7 +1488,10 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port, rgmii_ctrl |= RGMII_CTRL_DLL_TXC; if (interface == PHY_INTERFACE_MODE_RGMII) rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; - rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + + if (dev->chip_id != BCM53115_DEVICE_ID) + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); dev_info(ds->dev, "Configured port %d for %s\n", port, @@ -1369,6 +1555,10 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); + /* BCM63xx RGMII ports support RGMII */ + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + phy_interface_set_rgmii(config->supported_interfaces); + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100; @@ -1408,7 +1598,7 @@ static void b53_phylink_mac_config(struct phylink_config *config, struct b53_device *dev = ds->priv; int port = dp->index; - if (is63xx(dev) && port >= B53_63XX_RGMII0) + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) b53_adjust_63xx_rgmii(ds, port, interface); if (mode == MLO_AN_FIXED) { @@ -1429,8 +1619,11 @@ static void b53_phylink_mac_link_down(struct phylink_config *config, struct b53_device *dev = dp->ds->priv; int port = dp->index; - if (mode == MLO_AN_PHY) + if (mode == MLO_AN_PHY) { + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) + b53_force_link(dev, port, false); return; + } if (mode == MLO_AN_FIXED) { b53_force_link(dev, port, false); @@ -1458,6 +1651,13 @@ static void b53_phylink_mac_link_up(struct phylink_config *config, if (mode == MLO_AN_PHY) { /* Re-negotiate EEE if it was enabled already */ p->eee_enabled = b53_eee_init(ds, port, phydev); + + if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4)) { + b53_force_port_config(dev, port, speed, duplex, + tx_pause, rx_pause); + b53_force_link(dev, port, true); + } + return; } @@ -1482,7 +1682,10 @@ int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, { struct b53_device *dev = ds->priv; - b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering); + if (dev->vlan_filtering != vlan_filtering) { + dev->vlan_filtering = vlan_filtering; + b53_apply_config(dev); + } return 0; } @@ -1493,9 +1696,6 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port, { struct b53_device *dev = ds->priv; - if ((is5325(dev) || is5365(dev)) && vlan->vid == 0) - return -EOPNOTSUPP; - /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of * receiving VLAN tagged frames at all, we can still allow the port to * be configured for egress untagged. @@ -1507,7 +1707,7 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port, if (vlan->vid >= dev->num_vlans) return -ERANGE; - b53_enable_vlan(dev, port, true, ds->vlan_filtering); + b53_enable_vlan(dev, port, true, dev->vlan_filtering); return 0; } @@ -1520,18 +1720,29 @@ int b53_vlan_add(struct dsa_switch *ds, int port, bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; struct b53_vlan *vl; + u16 old_pvid, new_pvid; int err; err = b53_vlan_prepare(ds, port, vlan); if (err) return err; - vl = &dev->vlans[vlan->vid]; + if (vlan->vid == 0) + return 0; - b53_get_vlan_entry(dev, vlan->vid, vl); + old_pvid = dev->ports[port].pvid; + if (pvid) + new_pvid = vlan->vid; + else if (!pvid && vlan->vid == old_pvid) + new_pvid = b53_default_pvid(dev); + else + new_pvid = old_pvid; + dev->ports[port].pvid = new_pvid; - if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev)) - untagged = true; + vl = &dev->vlans[vlan->vid]; + + if (dsa_is_cpu_port(ds, port)) + untagged = false; vl->members |= BIT(port); if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) @@ -1539,13 +1750,16 @@ int b53_vlan_add(struct dsa_switch *ds, int port, else vl->untag &= ~BIT(port); + if (!dev->vlan_filtering) + return 0; + b53_set_vlan_entry(dev, vlan->vid, vl); b53_fast_age_vlan(dev, vlan->vid); - if (pvid && !dsa_is_cpu_port(ds, port)) { + if (!dsa_is_cpu_port(ds, port) && new_pvid != old_pvid) { b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), - vlan->vid); - b53_fast_age_vlan(dev, vlan->vid); + new_pvid); + b53_fast_age_vlan(dev, old_pvid); } return 0; @@ -1560,20 +1774,25 @@ int b53_vlan_del(struct dsa_switch *ds, int port, struct b53_vlan *vl; u16 pvid; - b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); + if (vlan->vid == 0) + return 0; - vl = &dev->vlans[vlan->vid]; + pvid = dev->ports[port].pvid; - b53_get_vlan_entry(dev, vlan->vid, vl); + vl = &dev->vlans[vlan->vid]; vl->members &= ~BIT(port); if (pvid == vlan->vid) pvid = b53_default_pvid(dev); + dev->ports[port].pvid = pvid; if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) vl->untag &= ~(BIT(port)); + if (!dev->vlan_filtering) + return 0; + b53_set_vlan_entry(dev, vlan->vid, vl); b53_fast_age_vlan(dev, vlan->vid); @@ -1625,7 +1844,82 @@ static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) return b53_arl_op_wait(dev); } -static int b53_arl_read(struct b53_device *dev, u64 mac, +static void b53_arl_read_entry_25(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u8 vid_entry; + u64 mac_vid; + + b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_VID_ENTRY_25(idx), + &vid_entry); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_arl_to_entry_25(ent, mac_vid, vid_entry); +} + +static void b53_arl_write_entry_25(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u8 vid_entry; + u64 mac_vid; + + b53_arl_from_entry_25(&mac_vid, &vid_entry, ent); + b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_VID_ENTRY_25(idx), vid_entry); + b53_write64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + mac_vid); +} + +static void b53_arl_read_entry_89(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u64 mac_vid; + u16 fwd_entry; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), &fwd_entry); + b53_arl_to_entry_89(ent, mac_vid, fwd_entry); +} + +static void b53_arl_write_entry_89(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_arl_from_entry_89(&mac_vid, &fwd_entry, ent); + b53_write64(dev, B53_ARLIO_PAGE, + B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); + b53_write16(dev, B53_ARLIO_PAGE, + B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); +} + +static void b53_arl_read_entry_95(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), &fwd_entry); + b53_arl_to_entry(ent, mac_vid, fwd_entry); +} + +static void b53_arl_write_entry_95(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + u32 fwd_entry; + u64 mac_vid; + + b53_arl_from_entry(&mac_vid, &fwd_entry, ent); + b53_write64(dev, B53_ARLIO_PAGE, B53_ARLTBL_MAC_VID_ENTRY(idx), + mac_vid); + b53_write32(dev, B53_ARLIO_PAGE, B53_ARLTBL_DATA_ENTRY(idx), + fwd_entry); +} + +static int b53_arl_read(struct b53_device *dev, const u8 *mac, u16 vid, struct b53_arl_entry *ent, u8 *idx) { DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES); @@ -1640,23 +1934,15 @@ static int b53_arl_read(struct b53_device *dev, u64 mac, /* Read the bins */ for (i = 0; i < dev->num_arl_bins; i++) { - u64 mac_vid; - u32 fwd_entry; - - b53_read64(dev, B53_ARLIO_PAGE, - B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); - b53_read32(dev, B53_ARLIO_PAGE, - B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); - b53_arl_to_entry(ent, mac_vid, fwd_entry); + b53_arl_read_entry(dev, ent, i); - if (!(fwd_entry & ARLTBL_VALID)) { + if (!ent->is_valid) { set_bit(i, free_bins); continue; } - if ((mac_vid & ARLTBL_MAC_MASK) != mac) + if (!ether_addr_equal(ent->mac, mac)) continue; - if (dev->vlan_enabled && - ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid) + if (dev->vlan_enabled && ent->vid != vid) continue; *idx = i; return 0; @@ -1670,9 +1956,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, const unsigned char *addr, u16 vid, bool is_valid) { struct b53_arl_entry ent; - u32 fwd_entry; - u64 mac, mac_vid = 0; u8 idx = 0; + u64 mac; int ret; /* Convert the array into a 64-bit MAC */ @@ -1680,14 +1965,19 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, /* Perform a read for the given MAC and VID */ b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); - b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + if (!is5325m(dev)) { + if (is5325(dev) || is5365(dev)) + b53_write8(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + else + b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + } /* Issue a read operation for this MAC */ ret = b53_arl_rw_op(dev, 1); if (ret) return ret; - ret = b53_arl_read(dev, mac, vid, &ent, &idx); + ret = b53_arl_read(dev, addr, vid, &ent, &idx); /* If this is a read, just finish now */ if (op) @@ -1704,7 +1994,6 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, /* We could not find a matching MAC, so reset to a new entry */ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n", addr, vid, idx); - fwd_entry = 0; break; default: dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n", @@ -1731,12 +2020,7 @@ static int b53_arl_op(struct b53_device *dev, int op, int port, ent.is_static = true; ent.is_age = false; memcpy(ent.mac, addr, ETH_ALEN); - b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); - - b53_write64(dev, B53_ARLIO_PAGE, - B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); - b53_write32(dev, B53_ARLIO_PAGE, - B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); + b53_arl_write_entry(dev, &ent, idx); return b53_arl_rw_op(dev, 0); } @@ -1748,12 +2032,6 @@ int b53_fdb_add(struct dsa_switch *ds, int port, struct b53_device *priv = ds->priv; int ret; - /* 5325 and 5365 require some more massaging, but could - * be supported eventually - */ - if (is5325(priv) || is5365(priv)) - return -EOPNOTSUPP; - mutex_lock(&priv->arl_mutex); ret = b53_arl_op(priv, 0, port, addr, vid, true); mutex_unlock(&priv->arl_mutex); @@ -1777,15 +2055,55 @@ int b53_fdb_del(struct dsa_switch *ds, int port, } EXPORT_SYMBOL(b53_fdb_del); +static void b53_read_arl_srch_ctl(struct b53_device *dev, u8 *val) +{ + u8 offset; + + if (is5325(dev) || is5365(dev)) + offset = B53_ARL_SRCH_CTL_25; + else if (dev->chip_id == BCM5389_DEVICE_ID || is5397_98(dev) || + is63xx(dev)) + offset = B53_ARL_SRCH_CTL_89; + else + offset = B53_ARL_SRCH_CTL; + + if (is63xx(dev)) { + u16 val16; + + b53_read16(dev, B53_ARLIO_PAGE, offset, &val16); + *val = val16 & 0xff; + } else { + b53_read8(dev, B53_ARLIO_PAGE, offset, val); + } +} + +static void b53_write_arl_srch_ctl(struct b53_device *dev, u8 val) +{ + u8 offset; + + if (is5325(dev) || is5365(dev)) + offset = B53_ARL_SRCH_CTL_25; + else if (dev->chip_id == BCM5389_DEVICE_ID || is5397_98(dev) || + is63xx(dev)) + offset = B53_ARL_SRCH_CTL_89; + else + offset = B53_ARL_SRCH_CTL; + + if (is63xx(dev)) + b53_write16(dev, B53_ARLIO_PAGE, offset, val); + else + b53_write8(dev, B53_ARLIO_PAGE, offset, val); +} + static int b53_arl_search_wait(struct b53_device *dev) { unsigned int timeout = 1000; u8 reg; do { - b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); + b53_read_arl_srch_ctl(dev, ®); if (!(reg & ARL_SRCH_STDN)) - return 0; + return -ENOENT; if (reg & ARL_SRCH_VLID) return 0; @@ -1796,16 +2114,52 @@ static int b53_arl_search_wait(struct b53_device *dev) return -ETIMEDOUT; } -static void b53_arl_search_rd(struct b53_device *dev, u8 idx, - struct b53_arl_entry *ent) +static void b53_arl_search_read_25(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + u64 mac_vid; + u8 ext; + + b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_EXT_25, &ext); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_0_MACVID_25, + &mac_vid); + b53_arl_search_to_entry_25(ent, mac_vid, ext); +} + +static void b53_arl_search_read_89(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) { + u16 fwd_entry; u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_MACVID_89, + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_89, &fwd_entry); + b53_arl_to_entry_89(ent, mac_vid, fwd_entry); +} + +static void b53_arl_search_read_63xx(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + u16 fwd_entry; + u64 mac_vid; + + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_MACVID_63XX, + &mac_vid); + b53_read16(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSLT_63XX, &fwd_entry); + b53_arl_search_to_entry_63xx(ent, mac_vid, fwd_entry); +} + +static void b53_arl_search_read_95(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ u32 fwd_entry; + u64 mac_vid; - b53_read64(dev, B53_ARLIO_PAGE, - B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); - b53_read32(dev, B53_ARLIO_PAGE, - B53_ARL_SRCH_RSTL(idx), &fwd_entry); + b53_read64(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL_MACVID(idx), + &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_RSTL(idx), + &fwd_entry); b53_arl_to_entry(ent, mac_vid, fwd_entry); } @@ -1824,30 +2178,31 @@ static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, int b53_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, void *data) { + unsigned int count = 0, results_per_hit = 1; struct b53_device *priv = ds->priv; struct b53_arl_entry results[2]; - unsigned int count = 0; int ret; - u8 reg; + + if (priv->num_arl_bins > 2) + results_per_hit = 2; mutex_lock(&priv->arl_mutex); /* Start search operation */ - reg = ARL_SRCH_STDN; - b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); + b53_write_arl_srch_ctl(priv, ARL_SRCH_STDN); do { ret = b53_arl_search_wait(priv); if (ret) break; - b53_arl_search_rd(priv, 0, &results[0]); + b53_arl_search_read(priv, 0, &results[0]); ret = b53_fdb_copy(port, &results[0], cb, data); if (ret) break; - if (priv->num_arl_bins > 2) { - b53_arl_search_rd(priv, 1, &results[1]); + if (results_per_hit == 2) { + b53_arl_search_read(priv, 1, &results[1]); ret = b53_fdb_copy(port, &results[1], cb, data); if (ret) break; @@ -1856,7 +2211,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port, break; } - } while (count++ < b53_max_arl_entries(priv) / 2); + } while (count++ < b53_max_arl_entries(priv) / results_per_hit); mutex_unlock(&priv->arl_mutex); @@ -1906,8 +2261,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, struct netlink_ext_ack *extack) { struct b53_device *dev = ds->priv; + struct b53_vlan *vl; s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - u16 pvlan, reg; + u16 pvlan, reg, pvid; unsigned int i; /* On 7278, port 7 which connects to the ASP should only receive @@ -1916,15 +2272,26 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, if (dev->chip_id == BCM7278_DEVICE_ID && port == 7) return -EINVAL; - /* Make this port leave the all VLANs join since we will have proper - * VLAN entries from now on - */ - if (is58xx(dev)) { - b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); - reg &= ~BIT(port); - if ((reg & BIT(cpu_port)) == BIT(cpu_port)) - reg &= ~BIT(cpu_port); - b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + + if (dev->vlan_filtering) { + /* Make this port leave the all VLANs join since we will have + * proper VLAN entries from now on + */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, + ®); + reg &= ~BIT(port); + if ((reg & BIT(cpu_port)) == BIT(cpu_port)) + reg &= ~BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, + reg); + } + + b53_get_vlan_entry(dev, pvid, vl); + vl->members &= ~BIT(port); + b53_set_vlan_entry(dev, pvid, vl); } b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); @@ -1944,6 +2311,9 @@ int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, pvlan |= BIT(i); } + /* Disable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_BASIC); + /* Configure the local port VLAN control membership to include * remote ports and update the local port bitmask */ @@ -1957,7 +2327,7 @@ EXPORT_SYMBOL(b53_br_join); void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) { struct b53_device *dev = ds->priv; - struct b53_vlan *vl = &dev->vlans[0]; + struct b53_vlan *vl; s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; unsigned int i; u16 pvlan, reg, pvid; @@ -1979,22 +2349,27 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) pvlan &= ~BIT(i); } + /* Enable redirection of unknown SA to the CPU port */ + b53_set_eap_mode(dev, port, EAP_MODE_SIMPLIFIED); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); dev->ports[port].vlan_ctl_mask = pvlan; pvid = b53_default_pvid(dev); + vl = &dev->vlans[pvid]; + + if (dev->vlan_filtering) { + /* Make this port join all VLANs without VLAN entries */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); + reg |= BIT(port); + if (!(reg & BIT(cpu_port))) + reg |= BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + } - /* Make this port join all VLANs without VLAN entries */ - if (is58xx(dev)) { - b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); - reg |= BIT(port); - if (!(reg & BIT(cpu_port))) - reg |= BIT(cpu_port); - b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); - } else { b53_get_vlan_entry(dev, pvid, vl); - vl->members |= BIT(port) | BIT(cpu_port); - vl->untag |= BIT(port) | BIT(cpu_port); + vl->members |= BIT(port); b53_set_vlan_entry(dev, pvid, vl); } } @@ -2047,7 +2422,13 @@ int b53_br_flags_pre(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) { - if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING)) + struct b53_device *dev = ds->priv; + unsigned long mask = (BR_FLOOD | BR_MCAST_FLOOD | BR_ISOLATED); + + if (!is5325(dev)) + mask |= BR_LEARNING; + + if (flags.mask & ~mask) return -EINVAL; return 0; @@ -2067,6 +2448,9 @@ int b53_br_flags(struct dsa_switch *ds, int port, if (flags.mask & BR_LEARNING) b53_port_set_learning(ds->priv, port, !!(flags.val & BR_LEARNING)); + if (flags.mask & BR_ISOLATED) + b53_port_set_isolated(ds->priv, port, + !!(flags.val & BR_ISOLATED)); return 0; } @@ -2123,8 +2507,11 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, goto out; } - /* Older models require a different 6 byte tag */ - if (is5325(dev) || is5365(dev) || is63xx(dev)) { + /* Older models require different 6 byte tags */ + if (is5325(dev) || is5365(dev)) { + dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY_FCS; + goto out; + } else if (is63xx(dev)) { dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY; goto out; } @@ -2214,6 +2601,9 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) { int ret; + if (!b53_support_eee(ds, port)) + return 0; + ret = phy_init_eee(phy, false); if (ret) return 0; @@ -2224,25 +2614,19 @@ int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) } EXPORT_SYMBOL(b53_eee_init); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) +bool b53_support_eee(struct dsa_switch *ds, int port) { struct b53_device *dev = ds->priv; - if (is5325(dev) || is5365(dev)) - return -EOPNOTSUPP; - - return 0; + return !is5325(dev) && !is5365(dev) && !is63xx(dev); } -EXPORT_SYMBOL(b53_get_mac_eee); +EXPORT_SYMBOL(b53_support_eee); int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct b53_device *dev = ds->priv; struct ethtool_keee *p = &dev->ports[port].eee; - if (is5325(dev) || is5365(dev)) - return -EOPNOTSUPP; - p->eee_enabled = e->eee_enabled; b53_eee_enable_set(ds, port, e->eee_enabled); @@ -2278,6 +2662,31 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port) return B53_MAX_MTU; } +int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct b53_device *dev = ds->priv; + u32 atc; + int reg; + + if (is63xx(dev)) + reg = B53_AGING_TIME_CONTROL_63XX; + else + reg = B53_AGING_TIME_CONTROL; + + if (dev->chip_id == BCM53101_DEVICE_ID) + atc = DIV_ROUND_CLOSEST(msecs, 500); + else + atc = DIV_ROUND_CLOSEST(msecs, 1000); + + if (!is5325(dev) && !is5365(dev)) + atc |= AGE_CHANGE; + + b53_write32(dev, B53_MGMT_PAGE, reg, atc); + + return 0; +} +EXPORT_SYMBOL_GPL(b53_set_ageing_time); + static const struct phylink_mac_ops b53_phylink_mac_ops = { .mac_select_pcs = b53_phylink_mac_select_pcs, .mac_config = b53_phylink_mac_config, @@ -2296,10 +2705,12 @@ static const struct dsa_switch_ops b53_switch_ops = { .phy_read = b53_phy_read16, .phy_write = b53_phy_write16, .phylink_get_caps = b53_phylink_get_caps, + .port_setup = b53_setup_port, .port_enable = b53_enable_port, .port_disable = b53_disable_port, - .get_mac_eee = b53_get_mac_eee, + .support_eee = b53_support_eee, .set_mac_eee = b53_set_mac_eee, + .set_ageing_time = b53_set_ageing_time, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_pre_bridge_flags = b53_br_flags_pre, @@ -2320,6 +2731,30 @@ static const struct dsa_switch_ops b53_switch_ops = { .port_change_mtu = b53_change_mtu, }; +static const struct b53_arl_ops b53_arl_ops_25 = { + .arl_read_entry = b53_arl_read_entry_25, + .arl_write_entry = b53_arl_write_entry_25, + .arl_search_read = b53_arl_search_read_25, +}; + +static const struct b53_arl_ops b53_arl_ops_89 = { + .arl_read_entry = b53_arl_read_entry_89, + .arl_write_entry = b53_arl_write_entry_89, + .arl_search_read = b53_arl_search_read_89, +}; + +static const struct b53_arl_ops b53_arl_ops_63xx = { + .arl_read_entry = b53_arl_read_entry_89, + .arl_write_entry = b53_arl_write_entry_89, + .arl_search_read = b53_arl_search_read_63xx, +}; + +static const struct b53_arl_ops b53_arl_ops_95 = { + .arl_read_entry = b53_arl_read_entry_95, + .arl_write_entry = b53_arl_write_entry_95, + .arl_search_read = b53_arl_search_read_95, +}; + struct b53_chip_data { u32 chip_id; const char *dev_name; @@ -2333,6 +2768,7 @@ struct b53_chip_data { u8 duplex_reg; u8 jumbo_pm_reg; u8 jumbo_size_reg; + const struct b53_arl_ops *arl_ops; }; #define B53_VTA_REGS \ @@ -2352,6 +2788,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .arl_buckets = 1024, .imp_port = 5, .duplex_reg = B53_DUPLEX_STAT_FE, + .arl_ops = &b53_arl_ops_25, }, { .chip_id = BCM5365_DEVICE_ID, @@ -2362,6 +2799,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .arl_buckets = 1024, .imp_port = 5, .duplex_reg = B53_DUPLEX_STAT_FE, + .arl_ops = &b53_arl_ops_25, }, { .chip_id = BCM5389_DEVICE_ID, @@ -2375,6 +2813,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, }, { .chip_id = BCM5395_DEVICE_ID, @@ -2388,6 +2827,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM5397_DEVICE_ID, @@ -2401,6 +2841,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, }, { .chip_id = BCM5398_DEVICE_ID, @@ -2414,6 +2855,21 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_89, + }, + { + .chip_id = BCM53101_DEVICE_ID, + .dev_name = "BCM53101", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 512, + .vta_regs = B53_VTA_REGS, + .imp_port = 8, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53115_DEVICE_ID, @@ -2427,6 +2883,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53125_DEVICE_ID, @@ -2440,6 +2897,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53128_DEVICE_ID, @@ -2453,32 +2911,21 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM63XX_DEVICE_ID, .dev_name = "BCM63xx", .vlans = 4096, .enabled_ports = 0, /* pdata must provide them */ - .arl_bins = 4, - .arl_buckets = 1024, - .imp_port = 8, - .vta_regs = B53_VTA_REGS_63XX, - .duplex_reg = B53_DUPLEX_STAT_63XX, - .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, - .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, - }, - { - .chip_id = BCM63268_DEVICE_ID, - .dev_name = "BCM63268", - .vlans = 4096, - .enabled_ports = 0, /* pdata must provide them */ - .arl_bins = 4, - .arl_buckets = 1024, + .arl_bins = 1, + .arl_buckets = 4096, .imp_port = 8, .vta_regs = B53_VTA_REGS_63XX, .duplex_reg = B53_DUPLEX_STAT_63XX, .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + .arl_ops = &b53_arl_ops_63xx, }, { .chip_id = BCM53010_DEVICE_ID, @@ -2492,6 +2939,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53011_DEVICE_ID, @@ -2505,6 +2953,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53012_DEVICE_ID, @@ -2518,6 +2967,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53018_DEVICE_ID, @@ -2531,6 +2981,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53019_DEVICE_ID, @@ -2544,6 +2995,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM58XX_DEVICE_ID, @@ -2557,6 +3009,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM583XX_DEVICE_ID, @@ -2570,6 +3023,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, /* Starfighter 2 */ { @@ -2584,6 +3038,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM7445_DEVICE_ID, @@ -2597,6 +3052,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM7278_DEVICE_ID, @@ -2610,6 +3066,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, { .chip_id = BCM53134_DEVICE_ID, @@ -2624,18 +3081,23 @@ static const struct b53_chip_data b53_switch_chips[] = { .duplex_reg = B53_DUPLEX_STAT_GE, .jumbo_pm_reg = B53_JUMBO_PORT_MASK, .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + .arl_ops = &b53_arl_ops_95, }, }; static int b53_switch_init(struct b53_device *dev) { + u32 chip_id = dev->chip_id; unsigned int i; int ret; + if (is63xx(dev)) + chip_id = BCM63XX_DEVICE_ID; + for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { const struct b53_chip_data *chip = &b53_switch_chips[i]; - if (chip->chip_id == dev->chip_id) { + if (chip->chip_id == chip_id) { if (!dev->enabled_ports) dev->enabled_ports = chip->enabled_ports; dev->name = chip->dev_name; @@ -2648,6 +3110,7 @@ static int b53_switch_init(struct b53_device *dev) dev->num_vlans = chip->vlans; dev->num_arl_bins = chip->arl_bins; dev->num_arl_buckets = chip->arl_buckets; + dev->arl_ops = chip->arl_ops; break; } } @@ -2678,6 +3141,9 @@ static int b53_switch_init(struct b53_device *dev) } } + if (is5325e(dev)) + dev->num_arl_buckets = 512; + dev->num_ports = fls(dev->enabled_ports); dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS); @@ -2740,6 +3206,7 @@ struct b53_device *b53_switch_alloc(struct device *base, ds->ops = &b53_switch_ops; ds->phylink_mac_ops = &b53_phylink_mac_ops; dev->vlan_enabled = true; + dev->vlan_filtering = false; /* Let DSA handle the case were multiple bridges span the same switch * device and different VLAN awareness settings are requested, which * would be breaking filtering semantics for any of the other bridge @@ -2778,10 +3245,24 @@ int b53_switch_detect(struct b53_device *dev) b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); - if (tmp == 0xf) + if (tmp == 0xf) { + u32 phy_id; + int val; + dev->chip_id = BCM5325_DEVICE_ID; - else + + val = b53_phy_read16(dev->ds, 0, MII_PHYSID1); + phy_id = (val & 0xffff) << 16; + val = b53_phy_read16(dev->ds, 0, MII_PHYSID2); + phy_id |= (val & 0xfff0); + + if (phy_id == 0x00406330) + dev->variant_id = B53_VARIANT_5325M; + else if (phy_id == 0x0143bc30) + dev->variant_id = B53_VARIANT_5325E; + } else { dev->chip_id = BCM5365_DEVICE_ID; + } break; case BCM5389_DEVICE_ID: case BCM5395_DEVICE_ID: @@ -2795,6 +3276,7 @@ int b53_switch_detect(struct b53_device *dev) return ret; switch (id32) { + case BCM53101_DEVICE_ID: case BCM53115_DEVICE_ID: case BCM53125_DEVICE_ID: case BCM53128_DEVICE_ID: diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c index 31d070bf161a..43a3b37b731b 100644 --- a/drivers/net/dsa/b53/b53_mdio.c +++ b/drivers/net/dsa/b53/b53_mdio.c @@ -374,6 +374,7 @@ static void b53_mdio_shutdown(struct mdio_device *mdiodev) static const struct of_device_id b53_of_match[] = { { .compatible = "brcm,bcm5325" }, + { .compatible = "brcm,bcm53101" }, { .compatible = "brcm,bcm53115" }, { .compatible = "brcm,bcm53125" }, { .compatible = "brcm,bcm53128" }, diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c index c687360a5b7f..f4a59d8fbdd6 100644 --- a/drivers/net/dsa/b53/b53_mmap.c +++ b/drivers/net/dsa/b53/b53_mmap.c @@ -21,13 +21,60 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <linux/platform_data/b53.h> +#include <linux/regmap.h> #include "b53_priv.h" +#define BCM63XX_EPHY_REG 0x3C +#define BCM63268_GPHY_REG 0x54 + +#define GPHY_CTRL_LOW_PWR BIT(3) +#define GPHY_CTRL_IDDQ_BIAS BIT(0) + +struct b53_phy_info { + u32 gphy_port_mask; + u32 ephy_enable_mask; + u32 ephy_port_mask; + u32 ephy_bias_bit; + const u32 *ephy_offset; +}; + struct b53_mmap_priv { void __iomem *regs; + struct regmap *gpio_ctrl; + const struct b53_phy_info *phy_info; + u32 phys_enabled; +}; + +static const u32 bcm6318_ephy_offsets[] = {4, 5, 6, 7}; + +static const struct b53_phy_info bcm6318_ephy_info = { + .ephy_enable_mask = BIT(0) | BIT(4) | BIT(8) | BIT(12) | BIT(16), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6318_ephy_offsets) - 1), 0), + .ephy_bias_bit = 24, + .ephy_offset = bcm6318_ephy_offsets, +}; + +static const u32 bcm6368_ephy_offsets[] = {2, 3, 4, 5}; + +static const struct b53_phy_info bcm6368_ephy_info = { + .ephy_enable_mask = BIT(0), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm6368_ephy_offsets) - 1), 0), + .ephy_bias_bit = 0, + .ephy_offset = bcm6368_ephy_offsets, +}; + +static const u32 bcm63268_ephy_offsets[] = {4, 9, 14}; + +static const struct b53_phy_info bcm63268_ephy_info = { + .gphy_port_mask = BIT(3), + .ephy_enable_mask = GENMASK(4, 0), + .ephy_port_mask = GENMASK((ARRAY_SIZE(bcm63268_ephy_offsets) - 1), 0), + .ephy_bias_bit = 24, + .ephy_offset = bcm63268_ephy_offsets, }; static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val) @@ -229,6 +276,71 @@ static int b53_mmap_phy_write16(struct b53_device *dev, int addr, int reg, return -EIO; } +static int bcm63xx_ephy_set(struct b53_device *dev, int port, bool enable) +{ + struct b53_mmap_priv *priv = dev->priv; + const struct b53_phy_info *info = priv->phy_info; + struct regmap *gpio_ctrl = priv->gpio_ctrl; + u32 mask, val; + + if (enable) { + mask = (info->ephy_enable_mask << info->ephy_offset[port]) + | BIT(info->ephy_bias_bit); + val = 0; + } else { + mask = (info->ephy_enable_mask << info->ephy_offset[port]); + if (!((priv->phys_enabled & ~BIT(port)) & info->ephy_port_mask)) + mask |= BIT(info->ephy_bias_bit); + val = mask; + } + return regmap_update_bits(gpio_ctrl, BCM63XX_EPHY_REG, mask, val); +} + +static int bcm63268_gphy_set(struct b53_device *dev, bool enable) +{ + struct b53_mmap_priv *priv = dev->priv; + struct regmap *gpio_ctrl = priv->gpio_ctrl; + u32 mask = GPHY_CTRL_IDDQ_BIAS | GPHY_CTRL_LOW_PWR; + u32 val = 0; + + if (!enable) + val = mask; + + return regmap_update_bits(gpio_ctrl, BCM63268_GPHY_REG, mask, val); +} + +static void b53_mmap_phy_enable(struct b53_device *dev, int port) +{ + struct b53_mmap_priv *priv = dev->priv; + int ret = 0; + + if (priv->phy_info) { + if (BIT(port) & priv->phy_info->ephy_port_mask) + ret = bcm63xx_ephy_set(dev, port, true); + else if (BIT(port) & priv->phy_info->gphy_port_mask) + ret = bcm63268_gphy_set(dev, true); + } + + if (!ret) + priv->phys_enabled |= BIT(port); +} + +static void b53_mmap_phy_disable(struct b53_device *dev, int port) +{ + struct b53_mmap_priv *priv = dev->priv; + int ret = 0; + + if (priv->phy_info) { + if (BIT(port) & priv->phy_info->ephy_port_mask) + ret = bcm63xx_ephy_set(dev, port, false); + else if (BIT(port) & priv->phy_info->gphy_port_mask) + ret = bcm63268_gphy_set(dev, false); + } + + if (!ret) + priv->phys_enabled &= ~BIT(port); +} + static const struct b53_io_ops b53_mmap_ops = { .read8 = b53_mmap_read8, .read16 = b53_mmap_read16, @@ -242,6 +354,8 @@ static const struct b53_io_ops b53_mmap_ops = { .write64 = b53_mmap_write64, .phy_read16 = b53_mmap_phy_read16, .phy_write16 = b53_mmap_phy_write16, + .phy_enable = b53_mmap_phy_enable, + .phy_disable = b53_mmap_phy_disable, }; static int b53_mmap_probe_of(struct platform_device *pdev, @@ -313,6 +427,18 @@ static int b53_mmap_probe(struct platform_device *pdev) priv->regs = pdata->regs; + priv->gpio_ctrl = syscon_regmap_lookup_by_phandle(np, "brcm,gpio-ctrl"); + if (!IS_ERR(priv->gpio_ctrl)) { + if (pdata->chip_id == BCM6318_DEVICE_ID || + pdata->chip_id == BCM6328_DEVICE_ID || + pdata->chip_id == BCM6362_DEVICE_ID) + priv->phy_info = &bcm6318_ephy_info; + else if (pdata->chip_id == BCM6368_DEVICE_ID) + priv->phy_info = &bcm6368_ephy_info; + else if (pdata->chip_id == BCM63268_DEVICE_ID) + priv->phy_info = &bcm63268_ephy_info; + } + dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, priv); if (!dev) return -ENOMEM; @@ -348,16 +474,16 @@ static const struct of_device_id b53_mmap_of_table[] = { .data = (void *)BCM63XX_DEVICE_ID, }, { .compatible = "brcm,bcm6318-switch", - .data = (void *)BCM63268_DEVICE_ID, + .data = (void *)BCM6318_DEVICE_ID, }, { .compatible = "brcm,bcm6328-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6328_DEVICE_ID, }, { .compatible = "brcm,bcm6362-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6362_DEVICE_ID, }, { .compatible = "brcm,bcm6368-switch", - .data = (void *)BCM63XX_DEVICE_ID, + .data = (void *)BCM6368_DEVICE_ID, }, { .compatible = "brcm,bcm63268-switch", .data = (void *)BCM63268_DEVICE_ID, diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h index 05141176daf5..bd6849e5bb93 100644 --- a/drivers/net/dsa/b53/b53_priv.h +++ b/drivers/net/dsa/b53/b53_priv.h @@ -45,6 +45,8 @@ struct b53_io_ops { int (*phy_write16)(struct b53_device *dev, int addr, int reg, u16 value); int (*irq_enable)(struct b53_device *dev, int port); void (*irq_disable)(struct b53_device *dev, int port); + void (*phy_enable)(struct b53_device *dev, int port); + void (*phy_disable)(struct b53_device *dev, int port); void (*phylink_get_caps)(struct b53_device *dev, int port, struct phylink_config *config); struct phylink_pcs *(*phylink_mac_select_pcs)(struct b53_device *dev, @@ -56,6 +58,17 @@ struct b53_io_ops { bool link_up); }; +struct b53_arl_entry; + +struct b53_arl_ops { + void (*arl_read_entry)(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx); + void (*arl_write_entry)(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx); + void (*arl_search_read)(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent); +}; + #define B53_INVALID_LANE 0xff enum { @@ -66,10 +79,15 @@ enum { BCM5395_DEVICE_ID = 0x95, BCM5397_DEVICE_ID = 0x97, BCM5398_DEVICE_ID = 0x98, + BCM53101_DEVICE_ID = 0x53101, BCM53115_DEVICE_ID = 0x53115, BCM53125_DEVICE_ID = 0x53125, BCM53128_DEVICE_ID = 0x53128, BCM63XX_DEVICE_ID = 0x6300, + BCM6318_DEVICE_ID = 0x6318, + BCM6328_DEVICE_ID = 0x6328, + BCM6362_DEVICE_ID = 0x6362, + BCM6368_DEVICE_ID = 0x6368, BCM63268_DEVICE_ID = 0x63268, BCM53010_DEVICE_ID = 0x53010, BCM53011_DEVICE_ID = 0x53011, @@ -83,6 +101,12 @@ enum { BCM53134_DEVICE_ID = 0x5075, }; +enum b53_variant_id { + B53_VARIANT_NONE = 0, + B53_VARIANT_5325E, + B53_VARIANT_5325M, +}; + struct b53_pcs { struct phylink_pcs pcs; struct b53_device *dev; @@ -95,6 +119,7 @@ struct b53_pcs { struct b53_port { u16 vlan_ctl_mask; + u16 pvid; struct ethtool_keee eee; }; @@ -113,9 +138,11 @@ struct b53_device { struct mutex stats_mutex; struct mutex arl_mutex; const struct b53_io_ops *ops; + const struct b53_arl_ops *arl_ops; /* chip specific data */ u32 chip_id; + enum b53_variant_id variant_id; u8 core_rev; u8 vta_regs[3]; u8 duplex_reg; @@ -146,6 +173,7 @@ struct b53_device { unsigned int num_vlans; struct b53_vlan *vlans; bool vlan_enabled; + bool vlan_filtering; unsigned int num_ports; struct b53_port *ports; @@ -162,6 +190,18 @@ static inline int is5325(struct b53_device *dev) return dev->chip_id == BCM5325_DEVICE_ID; } +static inline int is5325e(struct b53_device *dev) +{ + return is5325(dev) && + dev->variant_id == B53_VARIANT_5325E; +} + +static inline int is5325m(struct b53_device *dev) +{ + return is5325(dev) && + dev->variant_id == B53_VARIANT_5325M; +} + static inline int is5365(struct b53_device *dev) { #ifdef CONFIG_BCM47XX @@ -188,6 +228,7 @@ static inline int is531x5(struct b53_device *dev) { return dev->chip_id == BCM53115_DEVICE_ID || dev->chip_id == BCM53125_DEVICE_ID || + dev->chip_id == BCM53101_DEVICE_ID || dev->chip_id == BCM53128_DEVICE_ID || dev->chip_id == BCM53134_DEVICE_ID; } @@ -195,12 +236,17 @@ static inline int is531x5(struct b53_device *dev) static inline int is63xx(struct b53_device *dev) { return dev->chip_id == BCM63XX_DEVICE_ID || + dev->chip_id == BCM6318_DEVICE_ID || + dev->chip_id == BCM6328_DEVICE_ID || + dev->chip_id == BCM6362_DEVICE_ID || + dev->chip_id == BCM6368_DEVICE_ID || dev->chip_id == BCM63268_DEVICE_ID; } -static inline int is63268(struct b53_device *dev) +static inline int is6318_268(struct b53_device *dev) { - return dev->chip_id == BCM63268_DEVICE_ID; + return dev->chip_id == BCM6318_DEVICE_ID || + dev->chip_id == BCM63268_DEVICE_ID; } static inline int is5301x(struct b53_device *dev) @@ -294,6 +340,33 @@ static inline void b53_arl_to_entry(struct b53_arl_entry *ent, ent->vid = mac_vid >> ARLTBL_VID_S; } +static inline void b53_arl_to_entry_25(struct b53_arl_entry *ent, + u64 mac_vid, u8 vid_entry) +{ + memset(ent, 0, sizeof(*ent)); + ent->is_valid = !!(mac_vid & ARLTBL_VALID_25); + ent->is_age = !!(mac_vid & ARLTBL_AGE_25); + ent->is_static = !!(mac_vid & ARLTBL_STATIC_25); + u64_to_ether_addr(mac_vid, ent->mac); + ent->port = (mac_vid & ARLTBL_DATA_PORT_ID_MASK_25) >> + ARLTBL_DATA_PORT_ID_S_25; + if (is_unicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT) + ent->port = B53_CPU_PORT_25; + ent->vid = vid_entry; +} + +static inline void b53_arl_to_entry_89(struct b53_arl_entry *ent, + u64 mac_vid, u16 fwd_entry) +{ + memset(ent, 0, sizeof(*ent)); + ent->port = fwd_entry & ARLTBL_DATA_PORT_ID_MASK_89; + ent->is_valid = !!(fwd_entry & ARLTBL_VALID_89); + ent->is_age = !!(fwd_entry & ARLTBL_AGE_89); + ent->is_static = !!(fwd_entry & ARLTBL_STATIC_89); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = mac_vid >> ARLTBL_VID_S; +} + static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry, const struct b53_arl_entry *ent) { @@ -308,6 +381,89 @@ static inline void b53_arl_from_entry(u64 *mac_vid, u32 *fwd_entry, *fwd_entry |= ARLTBL_AGE; } +static inline void b53_arl_from_entry_25(u64 *mac_vid, u8 *vid_entry, + const struct b53_arl_entry *ent) +{ + *mac_vid = ether_addr_to_u64(ent->mac); + if (is_unicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT_25) + *mac_vid |= (u64)B53_CPU_PORT << ARLTBL_DATA_PORT_ID_S_25; + else + *mac_vid |= ((u64)ent->port << ARLTBL_DATA_PORT_ID_S_25) & + ARLTBL_DATA_PORT_ID_MASK_25; + if (ent->is_valid) + *mac_vid |= ARLTBL_VALID_25; + if (ent->is_static) + *mac_vid |= ARLTBL_STATIC_25; + if (ent->is_age) + *mac_vid |= ARLTBL_AGE_25; + *vid_entry = ent->vid; +} + +static inline void b53_arl_from_entry_89(u64 *mac_vid, u32 *fwd_entry, + const struct b53_arl_entry *ent) +{ + *mac_vid = ether_addr_to_u64(ent->mac); + *mac_vid |= (u64)(ent->vid & ARLTBL_VID_MASK) << ARLTBL_VID_S; + *fwd_entry = ent->port & ARLTBL_DATA_PORT_ID_MASK_89; + if (ent->is_valid) + *fwd_entry |= ARLTBL_VALID_89; + if (ent->is_static) + *fwd_entry |= ARLTBL_STATIC_89; + if (ent->is_age) + *fwd_entry |= ARLTBL_AGE_89; +} + +static inline void b53_arl_search_to_entry_25(struct b53_arl_entry *ent, + u64 mac_vid, u8 ext) +{ + memset(ent, 0, sizeof(*ent)); + ent->is_valid = !!(mac_vid & ARLTBL_VALID_25); + ent->is_age = !!(mac_vid & ARLTBL_AGE_25); + ent->is_static = !!(mac_vid & ARLTBL_STATIC_25); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = (mac_vid & ARL_SRCH_RSLT_VID_MASK_25) >> + ARL_SRCH_RSLT_VID_S_25; + ent->port = (mac_vid & ARL_SRCH_RSLT_PORT_ID_MASK_25) >> + ARL_SRCH_RSLT_PORT_ID_S_25; + if (is_multicast_ether_addr(ent->mac) && (ext & ARL_SRCH_RSLT_EXT_MC_MII)) + ent->port |= BIT(B53_CPU_PORT_25); + else if (!is_multicast_ether_addr(ent->mac) && ent->port == B53_CPU_PORT) + ent->port = B53_CPU_PORT_25; +} + +static inline void b53_arl_search_to_entry_63xx(struct b53_arl_entry *ent, + u64 mac_vid, u16 fwd_entry) +{ + memset(ent, 0, sizeof(*ent)); + u64_to_ether_addr(mac_vid, ent->mac); + ent->vid = mac_vid >> ARLTBL_VID_S; + + ent->port = fwd_entry & ARL_SRST_PORT_ID_MASK_63XX; + ent->port >>= 1; + + ent->is_age = !!(fwd_entry & ARL_SRST_AGE_63XX); + ent->is_static = !!(fwd_entry & ARL_SRST_STATIC_63XX); + ent->is_valid = 1; +} + +static inline void b53_arl_read_entry(struct b53_device *dev, + struct b53_arl_entry *ent, u8 idx) +{ + dev->arl_ops->arl_read_entry(dev, ent, idx); +} + +static inline void b53_arl_write_entry(struct b53_device *dev, + const struct b53_arl_entry *ent, u8 idx) +{ + dev->arl_ops->arl_write_entry(dev, ent, idx); +} + +static inline void b53_arl_search_read(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + dev->arl_ops->arl_search_read(dev, idx, ent); +} + #ifdef CONFIG_BCM47XX #include <linux/bcm47xx_nvram.h> @@ -339,6 +495,7 @@ void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); int b53_get_sset_count(struct dsa_switch *ds, int port, int sset); void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data); +int b53_set_ageing_time(struct dsa_switch *ds, unsigned int msecs); int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, bool *tx_fwd_offload, struct netlink_ext_ack *extack); void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge); @@ -380,11 +537,12 @@ enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mprot); void b53_mirror_del(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror); +int b53_setup_port(struct dsa_switch *ds, int port); int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy); void b53_disable_port(struct dsa_switch *ds, int port); void b53_brcm_hdr_setup(struct dsa_switch *ds, int port); int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy); -int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); +bool b53_support_eee(struct dsa_switch *ds, int port); int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); #endif diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index bfbcb66bef66..54a278db67c9 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -29,6 +29,7 @@ #define B53_ARLIO_PAGE 0x05 /* ARL Access */ #define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */ #define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */ +#define B53_IEEE_PAGE 0x0a /* IEEE 802.1X */ /* PHY Registers */ #define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */ @@ -50,6 +51,9 @@ /* Jumbo Frame Registers */ #define B53_JUMBO_PAGE 0x40 +/* EAP Registers */ +#define B53_EAP_PAGE 0x42 + /* EEE Control Registers Page */ #define B53_EEE_PAGE 0x92 @@ -92,18 +96,22 @@ #define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_LP_FLOW_25 BIT(3) /* BCM5325 only */ #define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */ #define PORT_OVERRIDE_RX_FLOW BIT(4) #define PORT_OVERRIDE_TX_FLOW BIT(5) #define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */ #define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */ -/* Power-down mode control */ +/* Power-down mode control (8 bit) */ #define B53_PD_MODE_CTRL_25 0x0f +#define PD_MODE_PORT_MASK 0x1f +/* Bit 0 also powers down the switch. */ +#define PD_MODE_POWER_DOWN_PORT(i) BIT(i) /* IP Multicast control (8 bit) */ #define B53_IP_MULTICAST_CTRL 0x21 -#define B53_IPMC_FWD_EN BIT(1) +#define B53_IP_MC BIT(0) #define B53_UC_FWD_EN BIT(6) #define B53_MC_FWD_EN BIT(7) @@ -111,6 +119,10 @@ #define B53_SWITCH_CTRL 0x22 #define B53_MII_DUMB_FWDG_EN BIT(6) +/* Protected Port Selection (16 bit) */ +#define B53_PROTECTED_PORT_SEL 0x24 +#define B53_PROTECTED_PORT_SEL_25 0x26 + /* (16 bit) */ #define B53_UC_FLOOD_MASK 0x32 #define B53_MC_FLOOD_MASK 0x34 @@ -217,6 +229,13 @@ #define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */ #define BRCM_HDR_P7_EN BIT(2) /* Enable tagging on port 7 */ +/* Aging Time control register (32 bit) */ +#define B53_AGING_TIME_CONTROL 0x06 +#define B53_AGING_TIME_CONTROL_63XX 0x08 +#define AGE_CHANGE BIT(20) +#define AGE_TIME_MASK 0x7ffff +#define AGE_TIME_MAX 1048575 + /* Mirror capture control register (16 bit) */ #define B53_MIR_CAP_CTL 0x10 #define CAP_PORT_MASK 0xf @@ -310,13 +329,12 @@ #define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10) #define ARLTBL_MAC_MASK 0xffffffffffffULL #define ARLTBL_VID_S 48 -#define ARLTBL_VID_MASK_25 0xff #define ARLTBL_VID_MASK 0xfff #define ARLTBL_DATA_PORT_ID_S_25 48 -#define ARLTBL_DATA_PORT_ID_MASK_25 0xf -#define ARLTBL_AGE_25 BIT(61) -#define ARLTBL_STATIC_25 BIT(62) -#define ARLTBL_VALID_25 BIT(63) +#define ARLTBL_DATA_PORT_ID_MASK_25 GENMASK_ULL(53, 48) +#define ARLTBL_AGE_25 BIT_ULL(61) +#define ARLTBL_STATIC_25 BIT_ULL(62) +#define ARLTBL_VALID_25 BIT_ULL(63) /* ARL Table Data Entry N Registers (32 bit) */ #define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18) @@ -326,12 +344,23 @@ #define ARLTBL_STATIC BIT(15) #define ARLTBL_VALID BIT(16) +/* BCM5389 ARL Table Data Entry N Register format (16 bit) */ +#define ARLTBL_DATA_PORT_ID_MASK_89 GENMASK(8, 0) +#define ARLTBL_TC_MASK_89 GENMASK(12, 10) +#define ARLTBL_AGE_89 BIT(13) +#define ARLTBL_STATIC_89 BIT(14) +#define ARLTBL_VALID_89 BIT(15) + +/* BCM5325/BCM565 ARL Table VID Entry N Registers (8 bit) */ +#define B53_ARLTBL_VID_ENTRY_25(n) ((0x2 * (n)) + 0x30) + /* Maximum number of bin entries in the ARL for all switches */ #define B53_ARLTBL_MAX_BIN_ENTRIES 4 /* ARL Search Control Register (8 bit) */ #define B53_ARL_SRCH_CTL 0x50 #define B53_ARL_SRCH_CTL_25 0x20 +#define B53_ARL_SRCH_CTL_89 0x30 #define ARL_SRCH_VLID BIT(0) #define ARL_SRCH_STDN BIT(7) @@ -339,22 +368,54 @@ #define B53_ARL_SRCH_ADDR 0x51 #define B53_ARL_SRCH_ADDR_25 0x22 #define B53_ARL_SRCH_ADDR_65 0x24 +#define B53_ARL_SRCH_ADDR_89 0x31 +#define B53_ARL_SRCH_ADDR_63XX 0x32 #define ARL_ADDR_MASK GENMASK(14, 0) /* ARL Search MAC/VID Result (64 bit) */ #define B53_ARL_SRCH_RSTL_0_MACVID 0x60 +#define B53_ARL_SRCH_RSLT_MACVID_89 0x33 +#define B53_ARL_SRCH_RSLT_MACVID_63XX 0x34 -/* Single register search result on 5325 */ +/* Single register search result on 5325/5365 */ #define B53_ARL_SRCH_RSTL_0_MACVID_25 0x24 -/* Single register search result on 5365 */ -#define B53_ARL_SRCH_RSTL_0_MACVID_65 0x30 +#define ARL_SRCH_RSLT_PORT_ID_S_25 48 +#define ARL_SRCH_RSLT_PORT_ID_MASK_25 GENMASK_ULL(52, 48) +#define ARL_SRCH_RSLT_VID_S_25 53 +#define ARL_SRCH_RSLT_VID_MASK_25 GENMASK_ULL(60, 53) + +/* BCM5325/5365 Search result extend register (8 bit) */ +#define B53_ARL_SRCH_RSLT_EXT_25 0x2c +#define ARL_SRCH_RSLT_EXT_MC_MII BIT(2) /* ARL Search Data Result (32 bit) */ #define B53_ARL_SRCH_RSTL_0 0x68 +/* BCM5389 ARL Search Data Result (16 bit) */ +#define B53_ARL_SRCH_RSLT_89 0x3b + #define B53_ARL_SRCH_RSTL_MACVID(x) (B53_ARL_SRCH_RSTL_0_MACVID + ((x) * 0x10)) #define B53_ARL_SRCH_RSTL(x) (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10)) +/* 63XX ARL Search Data Result (16 bit) */ +#define B53_ARL_SRCH_RSLT_63XX 0x3c +#define ARL_SRST_PORT_ID_MASK_63XX GENMASK(9, 1) +#define ARL_SRST_TC_MASK_63XX GENMASK(13, 11) +#define ARL_SRST_AGE_63XX BIT(14) +#define ARL_SRST_STATIC_63XX BIT(15) + +/************************************************************************* + * IEEE 802.1X Registers + *************************************************************************/ + +/* Multicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_MCAST_DLF 0x94 +#define B53_IEEE_MCAST_DROP_EN BIT(11) + +/* Unicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_UCAST_DLF 0x96 +#define B53_IEEE_UCAST_DROP_EN BIT(11) + /************************************************************************* * Port VLAN Registers *************************************************************************/ @@ -481,6 +542,17 @@ #define JMS_MAX_SIZE 9724 /************************************************************************* + * EAP Page Registers + *************************************************************************/ +#define B53_PORT_EAP_CONF(i) (0x20 + 8 * (i)) +#define EAP_MODE_SHIFT 51 +#define EAP_MODE_SHIFT_63XX 50 +#define EAP_MODE_MASK (0x3ull << EAP_MODE_SHIFT) +#define EAP_MODE_MASK_63XX (0x3ull << EAP_MODE_SHIFT_63XX) +#define EAP_MODE_BASIC 0 +#define EAP_MODE_SIMPLIFIED 3 + +/************************************************************************* * EEE Configuration Page Registers *************************************************************************/ diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c index 3f8a491ce885..7460122f6abc 100644 --- a/drivers/net/dsa/b53/b53_serdes.c +++ b/drivers/net/dsa/b53/b53_serdes.c @@ -99,8 +99,8 @@ static void b53_serdes_an_restart(struct phylink_pcs *pcs) SERDES_MII_BLK, reg); } -static void b53_serdes_get_state(struct phylink_pcs *pcs, - struct phylink_link_state *state) +static void b53_serdes_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, + struct phylink_link_state *state) { struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; u8 lane = pcs_to_b53_pcs(pcs)->lane; @@ -239,7 +239,6 @@ int b53_serdes_init(struct b53_device *dev, int port) pcs->dev = dev; pcs->lane = lane; pcs->pcs.ops = &b53_pcs_ops; - pcs->pcs.neg_mode = true; return 0; } diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 43bde1f583ff..960685596093 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1230,10 +1230,12 @@ static const struct dsa_switch_ops bcm_sf2_ops = { .resume = bcm_sf2_sw_resume, .get_wol = bcm_sf2_sw_get_wol, .set_wol = bcm_sf2_sw_set_wol, + .port_setup = b53_setup_port, .port_enable = bcm_sf2_port_setup, .port_disable = bcm_sf2_port_disable, - .get_mac_eee = b53_get_mac_eee, + .support_eee = b53_support_eee, .set_mac_eee = b53_set_mac_eee, + .set_ageing_time = b53_set_ageing_time, .port_bridge_join = b53_br_join, .port_bridge_leave = b53_br_leave, .port_pre_bridge_flags = b53_br_flags_pre, diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c index adbab544c60f..4a416f2717ba 100644 --- a/drivers/net/dsa/dsa_loop.c +++ b/drivers/net/dsa/dsa_loop.c @@ -17,7 +17,19 @@ #include <linux/dsa/loop.h> #include <net/dsa.h> -#include "dsa_loop.h" +#define DSA_LOOP_NUM_PORTS 6 +#define DSA_LOOP_CPU_PORT (DSA_LOOP_NUM_PORTS - 1) +#define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) + +struct dsa_loop_pdata { + /* Must be first, such that dsa_register_switch() can access this + * without gory pointer manipulations + */ + struct dsa_chip_data cd; + const char *name; + unsigned int enabled_ports; + const char *netdev; +}; static struct dsa_loop_mib_entry dsa_loop_mibs[] = { [DSA_LOOP_PHY_READ_OK] = { "phy_read_ok", }, @@ -27,6 +39,7 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = { }; static struct phy_device *phydevs[PHY_MAX_ADDR]; +static struct mdio_device *switch_mdiodev; enum dsa_loop_devlink_resource_id { DSA_LOOP_DEVLINK_PARAM_ID_VTU, @@ -382,34 +395,68 @@ static struct mdio_driver dsa_loop_drv = { .shutdown = dsa_loop_drv_shutdown, }; -#define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2) - static void dsa_loop_phydevs_unregister(void) { - unsigned int i; - - for (i = 0; i < NUM_FIXED_PHYS; i++) - if (!IS_ERR(phydevs[i])) { + for (int i = 0; i < NUM_FIXED_PHYS; i++) { + if (!IS_ERR(phydevs[i])) fixed_phy_unregister(phydevs[i]); - phy_device_free(phydevs[i]); - } + } } -static int __init dsa_loop_init(void) +static int __init dsa_loop_create_switch_mdiodev(void) { - struct fixed_phy_status status = { - .link = 1, - .speed = SPEED_100, - .duplex = DUPLEX_FULL, + static struct dsa_loop_pdata dsa_loop_pdata = { + .cd = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[DSA_LOOP_CPU_PORT] = "cpu", + }, + .name = "DSA mockup driver", + .enabled_ports = 0x1f, + .netdev = "eth0", }; - unsigned int i, ret; + struct mii_bus *bus; + int ret = -ENODEV; + + bus = mdio_find_bus("fixed-0"); + if (WARN_ON(!bus)) + return ret; + + switch_mdiodev = mdio_device_create(bus, 31); + if (IS_ERR(switch_mdiodev)) + goto out; + + strscpy(switch_mdiodev->modalias, "dsa-loop"); + switch_mdiodev->dev.platform_data = &dsa_loop_pdata; + + ret = mdio_device_register(switch_mdiodev); + if (ret) + mdio_device_free(switch_mdiodev); +out: + put_device(&bus->dev); + return ret; +} + +static int __init dsa_loop_init(void) +{ + unsigned int i; + int ret; + + ret = dsa_loop_create_switch_mdiodev(); + if (ret) + return ret; for (i = 0; i < NUM_FIXED_PHYS; i++) - phydevs[i] = fixed_phy_register(PHY_POLL, &status, NULL); + phydevs[i] = fixed_phy_register_100fd(); ret = mdio_driver_register(&dsa_loop_drv); - if (ret) + if (ret) { dsa_loop_phydevs_unregister(); + mdio_device_remove(switch_mdiodev); + mdio_device_free(switch_mdiodev); + } return ret; } @@ -419,10 +466,11 @@ static void __exit dsa_loop_exit(void) { mdio_driver_unregister(&dsa_loop_drv); dsa_loop_phydevs_unregister(); + mdio_device_remove(switch_mdiodev); + mdio_device_free(switch_mdiodev); } module_exit(dsa_loop_exit); -MODULE_SOFTDEP("pre: dsa_loop_bdinfo"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Florian Fainelli"); MODULE_DESCRIPTION("DSA loopback driver"); diff --git a/drivers/net/dsa/dsa_loop.h b/drivers/net/dsa/dsa_loop.h deleted file mode 100644 index 93e5c15d0efd..000000000000 --- a/drivers/net/dsa/dsa_loop.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DSA_LOOP_H -#define __DSA_LOOP_H - -struct dsa_chip_data; - -struct dsa_loop_pdata { - /* Must be first, such that dsa_register_switch() can access this - * without gory pointer manipulations - */ - struct dsa_chip_data cd; - const char *name; - unsigned int enabled_ports; - const char *netdev; -}; - -#define DSA_LOOP_NUM_PORTS 6 -#define DSA_LOOP_CPU_PORT (DSA_LOOP_NUM_PORTS - 1) - -#endif /* __DSA_LOOP_H */ diff --git a/drivers/net/dsa/dsa_loop_bdinfo.c b/drivers/net/dsa/dsa_loop_bdinfo.c deleted file mode 100644 index 14ca42491512..000000000000 --- a/drivers/net/dsa/dsa_loop_bdinfo.c +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/phy.h> -#include <net/dsa.h> - -#include "dsa_loop.h" - -static struct dsa_loop_pdata dsa_loop_pdata = { - .cd = { - .port_names[0] = "lan1", - .port_names[1] = "lan2", - .port_names[2] = "lan3", - .port_names[3] = "lan4", - .port_names[DSA_LOOP_CPU_PORT] = "cpu", - }, - .name = "DSA mockup driver", - .enabled_ports = 0x1f, - .netdev = "eth0", -}; - -static const struct mdio_board_info bdinfo = { - .bus_id = "fixed-0", - .modalias = "dsa-loop", - .mdio_addr = 31, - .platform_data = &dsa_loop_pdata, -}; - -static int __init dsa_loop_bdinfo_init(void) -{ - return mdiobus_register_board_info(&bdinfo, 1); -} -arch_initcall(dsa_loop_bdinfo_init) - -MODULE_DESCRIPTION("DSA mock-up switch driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c index 283ec5a6e23c..dd5f263ab984 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.c +++ b/drivers/net/dsa/hirschmann/hellcreek.c @@ -1061,7 +1061,7 @@ static void hellcreek_setup_tc_identity_mapping(struct hellcreek *hellcreek) static int hellcreek_setup_fdb(struct hellcreek *hellcreek) { - static struct hellcreek_fdb_entry l2_ptp = { + static const struct hellcreek_fdb_entry l2_ptp = { /* MAC: 01-1B-19-00-00-00 */ .mac = { 0x01, 0x1b, 0x19, 0x00, 0x00, 0x00 }, .portmask = 0x03, /* Management ports */ @@ -1072,7 +1072,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */ .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp4_ptp = { + static const struct hellcreek_fdb_entry udp4_ptp = { /* MAC: 01-00-5E-00-01-81 */ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x01, 0x81 }, .portmask = 0x03, /* Management ports */ @@ -1083,7 +1083,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp6_ptp = { + static const struct hellcreek_fdb_entry udp6_ptp = { /* MAC: 33-33-00-00-01-81 */ .mac = { 0x33, 0x33, 0x00, 0x00, 0x01, 0x81 }, .portmask = 0x03, /* Management ports */ @@ -1094,7 +1094,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry l2_p2p = { + static const struct hellcreek_fdb_entry l2_p2p = { /* MAC: 01-80-C2-00-00-0E */ .mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x0e }, .portmask = 0x03, /* Management ports */ @@ -1105,7 +1105,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, /* TC: 6 as per IEEE 802.1AS */ .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp4_p2p = { + static const struct hellcreek_fdb_entry udp4_p2p = { /* MAC: 01-00-5E-00-00-6B */ .mac = { 0x01, 0x00, 0x5e, 0x00, 0x00, 0x6b }, .portmask = 0x03, /* Management ports */ @@ -1116,7 +1116,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry udp6_p2p = { + static const struct hellcreek_fdb_entry udp6_p2p = { /* MAC: 33-33-00-00-00-6B */ .mac = { 0x33, 0x33, 0x00, 0x00, 0x00, 0x6b }, .portmask = 0x03, /* Management ports */ @@ -1127,7 +1127,7 @@ static int hellcreek_setup_fdb(struct hellcreek *hellcreek) .reprio_tc = 6, .reprio_en = 1, }; - static struct hellcreek_fdb_entry stp = { + static const struct hellcreek_fdb_entry stp = { /* MAC: 01-80-C2-00-00-00 */ .mac = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }, .portmask = 0x03, /* Management ports */ @@ -1320,13 +1320,13 @@ static int hellcreek_devlink_region_fdb_snapshot(struct devlink *dl, return 0; } -static struct devlink_region_ops hellcreek_region_vlan_ops = { +static const struct devlink_region_ops hellcreek_region_vlan_ops = { .name = "vlan", .snapshot = hellcreek_devlink_region_vlan_snapshot, .destructor = kfree, }; -static struct devlink_region_ops hellcreek_region_fdb_ops = { +static const struct devlink_region_ops hellcreek_region_fdb_ops = { .name = "fdb", .snapshot = hellcreek_devlink_region_fdb_snapshot, .destructor = kfree, @@ -1335,7 +1335,7 @@ static struct devlink_region_ops hellcreek_region_fdb_ops = { static int hellcreek_setup_devlink_regions(struct dsa_switch *ds) { struct hellcreek *hellcreek = ds->priv; - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; struct devlink_region *region; u64 size; int ret; @@ -1926,6 +1926,8 @@ static const struct dsa_switch_ops hellcreek_ds_ops = { .port_vlan_filtering = hellcreek_vlan_filtering, .setup = hellcreek_setup, .teardown = hellcreek_teardown, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int hellcreek_probe(struct platform_device *pdev) diff --git a/drivers/net/dsa/hirschmann/hellcreek.h b/drivers/net/dsa/hirschmann/hellcreek.h index 9c2ed2ba79da..bebf0d3ff330 100644 --- a/drivers/net/dsa/hirschmann/hellcreek.h +++ b/drivers/net/dsa/hirschmann/hellcreek.h @@ -244,7 +244,7 @@ struct hellcreek_port_hwtstamp { struct sk_buff *tx_skb; /* Current timestamp configuration */ - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; }; struct hellcreek_port { diff --git a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c index ca2500aba96f..99941ff1ebf9 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c +++ b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c @@ -40,7 +40,7 @@ int hellcreek_get_ts_info(struct dsa_switch *ds, int port, * the user requested what is actually available or not */ static int hellcreek_set_hwtstamp_config(struct hellcreek *hellcreek, int port, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { struct hellcreek_port_hwtstamp *ps = &hellcreek->ports[port].port_hwtstamp; @@ -110,41 +110,35 @@ static int hellcreek_set_hwtstamp_config(struct hellcreek *hellcreek, int port, } int hellcreek_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct hellcreek *hellcreek = ds->priv; struct hellcreek_port_hwtstamp *ps; - struct hwtstamp_config config; int err; ps = &hellcreek->ports[port].port_hwtstamp; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - err = hellcreek_set_hwtstamp_config(hellcreek, port, &config); + err = hellcreek_set_hwtstamp_config(hellcreek, port, config); if (err) return err; /* Save the chosen configuration to be returned later */ - memcpy(&ps->tstamp_config, &config, sizeof(config)); + ps->tstamp_config = *config; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int hellcreek_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct hellcreek *hellcreek = ds->priv; struct hellcreek_port_hwtstamp *ps; - struct hwtstamp_config *config; ps = &hellcreek->ports[port].port_hwtstamp; - config = &ps->tstamp_config; + *config = ps->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } /* Returns a pointer to the PTP header if the caller should time stamp, or NULL diff --git a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h index 7d88da2134f2..388821c4aa10 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h +++ b/drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h @@ -38,9 +38,10 @@ #define TX_TSTAMP_TIMEOUT msecs_to_jiffies(40) int hellcreek_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); int hellcreek_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *config); bool hellcreek_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *clone, unsigned int type); diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c index bfe21f9f7dcd..cb23bea9c21b 100644 --- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c +++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c @@ -376,8 +376,18 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek) hellcreek_set_brightness(hellcreek, STATUS_OUT_IS_GM, 1); /* Register both leds */ - led_classdev_register(hellcreek->dev, &hellcreek->led_sync_good); - led_classdev_register(hellcreek->dev, &hellcreek->led_is_gm); + ret = led_classdev_register(hellcreek->dev, &hellcreek->led_sync_good); + if (ret) { + dev_err(hellcreek->dev, "Failed to register sync_good LED\n"); + goto out; + } + + ret = led_classdev_register(hellcreek->dev, &hellcreek->led_is_gm); + if (ret) { + dev_err(hellcreek->dev, "Failed to register is_gm LED\n"); + led_classdev_unregister(&hellcreek->led_sync_good); + goto out; + } ret = 0; diff --git a/drivers/net/dsa/ks8995.c b/drivers/net/dsa/ks8995.c new file mode 100644 index 000000000000..77d8b842693c --- /dev/null +++ b/drivers/net/dsa/ks8995.c @@ -0,0 +1,857 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches + * + * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org> + * Copyright (C) 2025 Linus Walleij <linus.walleij@linaro.org> + * + * This file was based on: drivers/spi/at25.c + * Copyright (C) 2006 David Brownell + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bits.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/spi/spi.h> +#include <net/dsa.h> + +#define DRV_VERSION "0.1.1" +#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver" + +/* ------------------------------------------------------------------------ */ + +#define KS8995_REG_ID0 0x00 /* Chip ID0 */ +#define KS8995_REG_ID1 0x01 /* Chip ID1 */ + +#define KS8995_REG_GC0 0x02 /* Global Control 0 */ + +#define KS8995_GC0_P5_PHY BIT(3) /* Port 5 PHY enabled */ + +#define KS8995_REG_GC1 0x03 /* Global Control 1 */ +#define KS8995_REG_GC2 0x04 /* Global Control 2 */ + +#define KS8995_GC2_HUGE BIT(2) /* Huge packet support */ +#define KS8995_GC2_LEGAL BIT(1) /* Legal size override */ + +#define KS8995_REG_GC3 0x05 /* Global Control 3 */ +#define KS8995_REG_GC4 0x06 /* Global Control 4 */ + +#define KS8995_GC4_10BT BIT(4) /* Force switch to 10Mbit */ +#define KS8995_GC4_MII_FLOW BIT(5) /* MII full-duplex flow control enable */ +#define KS8995_GC4_MII_HD BIT(6) /* MII half-duplex mode enable */ + +#define KS8995_REG_GC5 0x07 /* Global Control 5 */ +#define KS8995_REG_GC6 0x08 /* Global Control 6 */ +#define KS8995_REG_GC7 0x09 /* Global Control 7 */ +#define KS8995_REG_GC8 0x0a /* Global Control 8 */ +#define KS8995_REG_GC9 0x0b /* Global Control 9 */ + +#define KS8995_GC9_SPECIAL BIT(0) /* Special tagging mode (DSA) */ + +/* In DSA the ports 1-4 are numbered 0-3 and the CPU port is port 4 */ +#define KS8995_REG_PC(p, r) (0x10 + (0x10 * (p)) + (r)) /* Port Control */ +#define KS8995_REG_PS(p, r) (0x1e + (0x10 * (p)) + (r)) /* Port Status */ + +#define KS8995_REG_PC0 0x00 /* Port Control 0 */ +#define KS8995_REG_PC1 0x01 /* Port Control 1 */ +#define KS8995_REG_PC2 0x02 /* Port Control 2 */ +#define KS8995_REG_PC3 0x03 /* Port Control 3 */ +#define KS8995_REG_PC4 0x04 /* Port Control 4 */ +#define KS8995_REG_PC5 0x05 /* Port Control 5 */ +#define KS8995_REG_PC6 0x06 /* Port Control 6 */ +#define KS8995_REG_PC7 0x07 /* Port Control 7 */ +#define KS8995_REG_PC8 0x08 /* Port Control 8 */ +#define KS8995_REG_PC9 0x09 /* Port Control 9 */ +#define KS8995_REG_PC10 0x0a /* Port Control 10 */ +#define KS8995_REG_PC11 0x0b /* Port Control 11 */ +#define KS8995_REG_PC12 0x0c /* Port Control 12 */ +#define KS8995_REG_PC13 0x0d /* Port Control 13 */ + +#define KS8995_PC0_TAG_INS BIT(2) /* Enable tag insertion on port */ +#define KS8995_PC0_TAG_REM BIT(1) /* Enable tag removal on port */ +#define KS8995_PC0_PRIO_EN BIT(0) /* Enable priority handling */ + +#define KS8995_PC2_TXEN BIT(2) /* Enable TX on port */ +#define KS8995_PC2_RXEN BIT(1) /* Enable RX on port */ +#define KS8995_PC2_LEARN_DIS BIT(0) /* Disable learning on port */ + +#define KS8995_PC13_TXDIS BIT(6) /* Disable transmitter */ +#define KS8995_PC13_PWDN BIT(3) /* Power down */ + +#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */ +#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */ +#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */ +#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */ +#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */ +#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */ +#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */ +#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */ + +#define KS8995_REG_MAC0 0x68 /* MAC address 0 */ +#define KS8995_REG_MAC1 0x69 /* MAC address 1 */ +#define KS8995_REG_MAC2 0x6a /* MAC address 2 */ +#define KS8995_REG_MAC3 0x6b /* MAC address 3 */ +#define KS8995_REG_MAC4 0x6c /* MAC address 4 */ +#define KS8995_REG_MAC5 0x6d /* MAC address 5 */ + +#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */ +#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */ +#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */ +#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */ +#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */ +#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */ +#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */ +#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */ +#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */ +#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */ + +#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */ + +#define KS8995_REGS_SIZE 0x80 +#define KSZ8864_REGS_SIZE 0x100 +#define KSZ8795_REGS_SIZE 0x100 + +#define ID1_CHIPID_M 0xf +#define ID1_CHIPID_S 4 +#define ID1_REVISION_M 0x7 +#define ID1_REVISION_S 1 +#define ID1_START_SW 1 /* start the switch */ + +#define FAMILY_KS8995 0x95 +#define FAMILY_KSZ8795 0x87 +#define CHIPID_M 0 +#define KS8995_CHIP_ID 0x00 +#define KSZ8864_CHIP_ID 0x01 +#define KSZ8795_CHIP_ID 0x09 + +#define KS8995_CMD_WRITE 0x02U +#define KS8995_CMD_READ 0x03U + +#define KS8995_CPU_PORT 4 +#define KS8995_NUM_PORTS 5 /* 5 ports including the CPU port */ +#define KS8995_RESET_DELAY 10 /* usec */ + +enum ks8995_chip_variant { + ks8995, + ksz8864, + ksz8795, + max_variant +}; + +struct ks8995_chip_params { + char *name; + int family_id; + int chip_id; + int regs_size; + int addr_width; + int addr_shift; +}; + +static const struct ks8995_chip_params ks8995_chip[] = { + [ks8995] = { + .name = "KS8995MA", + .family_id = FAMILY_KS8995, + .chip_id = KS8995_CHIP_ID, + .regs_size = KS8995_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8864] = { + .name = "KSZ8864RMN", + .family_id = FAMILY_KS8995, + .chip_id = KSZ8864_CHIP_ID, + .regs_size = KSZ8864_REGS_SIZE, + .addr_width = 8, + .addr_shift = 0, + }, + [ksz8795] = { + .name = "KSZ8795CLX", + .family_id = FAMILY_KSZ8795, + .chip_id = KSZ8795_CHIP_ID, + .regs_size = KSZ8795_REGS_SIZE, + .addr_width = 12, + .addr_shift = 1, + }, +}; + +struct ks8995_switch { + struct spi_device *spi; + struct device *dev; + struct dsa_switch *ds; + struct mutex lock; + struct gpio_desc *reset_gpio; + struct bin_attribute regs_attr; + const struct ks8995_chip_params *chip; + int revision_id; + unsigned int max_mtu[KS8995_NUM_PORTS]; +}; + +static const struct spi_device_id ks8995_id[] = { + {"ks8995", ks8995}, + {"ksz8864", ksz8864}, + {"ksz8795", ksz8795}, + { } +}; +MODULE_DEVICE_TABLE(spi, ks8995_id); + +static const struct of_device_id ks8995_spi_of_match[] = { + { .compatible = "micrel,ks8995" }, + { .compatible = "micrel,ksz8864" }, + { .compatible = "micrel,ksz8795" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ks8995_spi_of_match); + +static inline u8 get_chip_id(u8 val) +{ + return (val >> ID1_CHIPID_S) & ID1_CHIPID_M; +} + +static inline u8 get_chip_rev(u8 val) +{ + return (val >> ID1_REVISION_S) & ID1_REVISION_M; +} + +/* create_spi_cmd - create a chip specific SPI command header + * @ks: pointer to switch instance + * @cmd: SPI command for switch + * @address: register address for command + * + * Different chip families use different bit pattern to address the switches + * registers: + * + * KS8995: 8bit command + 8bit address + * KSZ8795: 3bit command + 12bit address + 1bit TR (?) + */ +static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd, + unsigned address) +{ + u16 result = cmd; + + /* make room for address (incl. address shift) */ + result <<= ks->chip->addr_width + ks->chip->addr_shift; + /* add address */ + result |= address << ks->chip->addr_shift; + /* SPI protocol needs big endian */ + return cpu_to_be16(result); +} +/* ------------------------------------------------------------------------ */ +static int ks8995_read(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static int ks8995_write(struct ks8995_switch *ks, char *buf, + unsigned offset, size_t count) +{ + __be16 cmd; + struct spi_transfer t[2]; + struct spi_message m; + int err; + + cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset); + spi_message_init(&m); + + memset(&t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = sizeof(cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = count; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&ks->lock); + err = spi_sync(ks->spi, &m); + mutex_unlock(&ks->lock); + + return err ? err : count; +} + +static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf) +{ + return ks8995_read(ks, buf, addr, 1) != 1; +} + +static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val) +{ + char buf = val; + + return ks8995_write(ks, &buf, addr, 1) != 1; +} + +/* ------------------------------------------------------------------------ */ + +static int ks8995_stop(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 0); +} + +static int ks8995_start(struct ks8995_switch *ks) +{ + return ks8995_write_reg(ks, KS8995_REG_ID1, 1); +} + +static int ks8995_reset(struct ks8995_switch *ks) +{ + int err; + + err = ks8995_stop(ks); + if (err) + return err; + + udelay(KS8995_RESET_DELAY); + + return ks8995_start(ks); +} + +/* ks8995_get_revision - get chip revision + * @ks: pointer to switch instance + * + * Verify chip family and id and get chip revision. + */ +static int ks8995_get_revision(struct ks8995_switch *ks) +{ + int err; + u8 id0, id1, ksz8864_id; + + /* read family id */ + err = ks8995_read_reg(ks, KS8995_REG_ID0, &id0); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify family id */ + if (id0 != ks->chip->family_id) { + dev_err(&ks->spi->dev, "chip family id mismatch: expected 0x%02x but 0x%02x read\n", + ks->chip->family_id, id0); + err = -ENODEV; + goto err_out; + } + + switch (ks->chip->family_id) { + case FAMILY_KS8995: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + /* verify chip id */ + if ((get_chip_id(id1) == CHIPID_M) && + (get_chip_id(id1) == ks->chip->chip_id)) { + /* KS8995MA */ + ks->revision_id = get_chip_rev(id1); + } else if (get_chip_id(id1) != CHIPID_M) { + /* KSZ8864RMN */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &ksz8864_id); + if (err) { + err = -EIO; + goto err_out; + } + + if ((ksz8864_id & 0x80) && + (ks->chip->chip_id == KSZ8864_CHIP_ID)) { + ks->revision_id = get_chip_rev(id1); + } + + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KS8995 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + case FAMILY_KSZ8795: + /* try reading chip id at CHIP ID1 */ + err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1); + if (err) { + err = -EIO; + goto err_out; + } + + if (get_chip_id(id1) == ks->chip->chip_id) { + ks->revision_id = get_chip_rev(id1); + } else { + dev_err(&ks->spi->dev, "unsupported chip id for KSZ8795 family: 0x%02x\n", + id1); + err = -ENODEV; + } + break; + default: + dev_err(&ks->spi->dev, "unsupported family id: 0x%02x\n", id0); + err = -ENODEV; + break; + } +err_out: + return err; +} + +static int ks8995_check_config(struct ks8995_switch *ks) +{ + int ret; + u8 val; + + ret = ks8995_read_reg(ks, KS8995_REG_GC0, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC0\n"); + return ret; + } + + dev_dbg(ks->dev, "port 5 PHY %senabled\n", + (val & KS8995_GC0_P5_PHY) ? "" : "not "); + + val |= KS8995_GC0_P5_PHY; + ret = ks8995_write_reg(ks, KS8995_REG_GC0, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC0\n"); + + dev_dbg(ks->dev, "set KS8995_REG_GC0 to 0x%02x\n", val); + + return 0; +} + +static void +ks8995_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ +} + +static void +ks8995_mac_link_up(struct phylink_config *config, struct phy_device *phydev, + unsigned int mode, phy_interface_t interface, + int speed, int duplex, bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ks8995_switch *ks = dp->ds->priv; + int port = dp->index; + int ret; + u8 val; + + /* Allow forcing the mode on the fixed CPU port, no autonegotiation. + * We assume autonegotiation works on the PHY-facing ports. + */ + if (port != KS8995_CPU_PORT) + return; + + dev_dbg(ks->dev, "MAC link up on CPU port (%d)\n", port); + + ret = ks8995_read_reg(ks, KS8995_REG_GC4, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC4\n"); + return; + } + + /* Conjure port config */ + switch (speed) { + case SPEED_10: + dev_dbg(ks->dev, "set switch MII to 100Mbit mode\n"); + val |= KS8995_GC4_10BT; + break; + case SPEED_100: + default: + dev_dbg(ks->dev, "set switch MII to 100Mbit mode\n"); + val &= ~KS8995_GC4_10BT; + break; + } + + if (duplex == DUPLEX_HALF) { + dev_dbg(ks->dev, "set switch MII to half duplex\n"); + val |= KS8995_GC4_MII_HD; + } else { + dev_dbg(ks->dev, "set switch MII to full duplex\n"); + val &= ~KS8995_GC4_MII_HD; + } + + dev_dbg(ks->dev, "set KS8995_REG_GC4 to %02x\n", val); + + /* Enable the CPU port */ + ret = ks8995_write_reg(ks, KS8995_REG_GC4, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC4\n"); +} + +static void +ks8995_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ks8995_switch *ks = dp->ds->priv; + int port = dp->index; + + if (port != KS8995_CPU_PORT) + return; + + dev_dbg(ks->dev, "MAC link down on CPU port (%d)\n", port); + + /* Disable the CPU port */ +} + +static const struct phylink_mac_ops ks8995_phylink_mac_ops = { + .mac_config = ks8995_mac_config, + .mac_link_up = ks8995_mac_link_up, + .mac_link_down = ks8995_mac_link_down, +}; + +static enum +dsa_tag_protocol ks8995_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + /* This switch actually uses the 6 byte KS8995 protocol */ + return DSA_TAG_PROTO_NONE; +} + +static int ks8995_setup(struct dsa_switch *ds) +{ + return 0; +} + +static int ks8995_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct ks8995_switch *ks = ds->priv; + + dev_dbg(ks->dev, "enable port %d\n", port); + + return 0; +} + +static void ks8995_port_disable(struct dsa_switch *ds, int port) +{ + struct ks8995_switch *ks = ds->priv; + + dev_dbg(ks->dev, "disable port %d\n", port); +} + +static int ks8995_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + /* We support enabling/disabling learning */ + if (flags.mask & ~(BR_LEARNING)) + return -EINVAL; + + return 0; +} + +static int ks8995_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct ks8995_switch *ks = ds->priv; + int ret; + u8 val; + + if (flags.mask & BR_LEARNING) { + ret = ks8995_read_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_PC2 on port %d\n", port); + return ret; + } + + if (flags.val & BR_LEARNING) + val &= ~KS8995_PC2_LEARN_DIS; + else + val |= KS8995_PC2_LEARN_DIS; + + ret = ks8995_write_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), val); + if (ret) { + dev_err(ks->dev, "failed to write KS8995_REG_PC2 on port %d\n", port); + return ret; + } + } + + return 0; +} + +static void ks8995_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct ks8995_switch *ks = ds->priv; + int ret; + u8 val; + + ret = ks8995_read_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_PC2 on port %d\n", port); + return; + } + + /* Set the bits for the different STP states in accordance with + * the datasheet, pages 36-37 "Spanning tree support". + */ + switch (state) { + case BR_STATE_DISABLED: + case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: + val &= ~KS8995_PC2_TXEN; + val &= ~KS8995_PC2_RXEN; + val |= KS8995_PC2_LEARN_DIS; + break; + case BR_STATE_LEARNING: + val &= ~KS8995_PC2_TXEN; + val &= ~KS8995_PC2_RXEN; + val &= ~KS8995_PC2_LEARN_DIS; + break; + case BR_STATE_FORWARDING: + val |= KS8995_PC2_TXEN; + val |= KS8995_PC2_RXEN; + val &= ~KS8995_PC2_LEARN_DIS; + break; + default: + dev_err(ks->dev, "unknown bridge state requested\n"); + return; + } + + ret = ks8995_write_reg(ks, KS8995_REG_PC(port, KS8995_REG_PC2), val); + if (ret) { + dev_err(ks->dev, "failed to write KS8995_REG_PC2 on port %d\n", port); + return; + } + + dev_dbg(ks->dev, "set KS8995_REG_PC2 for port %d to %02x\n", port, val); +} + +static void ks8995_phylink_get_caps(struct dsa_switch *dsa, int port, + struct phylink_config *config) +{ + unsigned long *interfaces = config->supported_interfaces; + + if (port == KS8995_CPU_PORT) + __set_bit(PHY_INTERFACE_MODE_MII, interfaces); + + if (port <= 3) { + /* Internal PHYs */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces); + /* phylib default */ + __set_bit(PHY_INTERFACE_MODE_MII, interfaces); + } + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; +} + +/* Huge packet support up to 1916 byte packages "inclusive" + * which means that tags are included. If the bit is not set + * it is 1536 bytes "inclusive". We present the length without + * tags or ethernet headers. The setting affects all ports. + */ +static int ks8995_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct ks8995_switch *ks = ds->priv; + unsigned int max_mtu; + int ret; + u8 val; + int i; + + ks->max_mtu[port] = new_mtu; + + /* Roof out the MTU for the entire switch to the greatest + * common denominator: the biggest set for any one port will + * be the biggest MTU for the switch. + */ + max_mtu = ETH_DATA_LEN; + for (i = 0; i < KS8995_NUM_PORTS; i++) { + if (ks->max_mtu[i] > max_mtu) + max_mtu = ks->max_mtu[i]; + } + + /* Translate to layer 2 size. + * Add ethernet and (possible) VLAN headers, and checksum to the size. + * For ETH_DATA_LEN (1500 bytes) this will add up to 1522 bytes. + */ + max_mtu += VLAN_ETH_HLEN; + max_mtu += ETH_FCS_LEN; + + ret = ks8995_read_reg(ks, KS8995_REG_GC2, &val); + if (ret) { + dev_err(ks->dev, "failed to read KS8995_REG_GC2\n"); + return ret; + } + + if (max_mtu <= 1522) { + val &= ~KS8995_GC2_HUGE; + val &= ~KS8995_GC2_LEGAL; + } else if (max_mtu > 1522 && max_mtu <= 1536) { + /* This accepts packets up to 1536 bytes */ + val &= ~KS8995_GC2_HUGE; + val |= KS8995_GC2_LEGAL; + } else { + /* This accepts packets up to 1916 bytes */ + val |= KS8995_GC2_HUGE; + val |= KS8995_GC2_LEGAL; + } + + dev_dbg(ks->dev, "new max MTU %d bytes (inclusive)\n", max_mtu); + + ret = ks8995_write_reg(ks, KS8995_REG_GC2, val); + if (ret) + dev_err(ks->dev, "failed to set KS8995_REG_GC2\n"); + + return ret; +} + +static int ks8995_get_max_mtu(struct dsa_switch *ds, int port) +{ + return 1916 - ETH_HLEN - ETH_FCS_LEN; +} + +static const struct dsa_switch_ops ks8995_ds_ops = { + .get_tag_protocol = ks8995_get_tag_protocol, + .setup = ks8995_setup, + .port_pre_bridge_flags = ks8995_port_pre_bridge_flags, + .port_bridge_flags = ks8995_port_bridge_flags, + .port_enable = ks8995_port_enable, + .port_disable = ks8995_port_disable, + .port_stp_state_set = ks8995_port_stp_state_set, + .port_change_mtu = ks8995_change_mtu, + .port_max_mtu = ks8995_get_max_mtu, + .phylink_get_caps = ks8995_phylink_get_caps, +}; + +/* ------------------------------------------------------------------------ */ +static int ks8995_probe(struct spi_device *spi) +{ + struct ks8995_switch *ks; + int err; + int variant = spi_get_device_id(spi)->driver_data; + + if (variant >= max_variant) { + dev_err(&spi->dev, "bad chip variant %d\n", variant); + return -ENODEV; + } + + ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL); + if (!ks) + return -ENOMEM; + + mutex_init(&ks->lock); + ks->spi = spi; + ks->dev = &spi->dev; + ks->chip = &ks8995_chip[variant]; + + ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", + GPIOD_OUT_HIGH); + err = PTR_ERR_OR_ZERO(ks->reset_gpio); + if (err) { + dev_err(&spi->dev, + "failed to get reset gpio: %d\n", err); + return err; + } + + err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset"); + if (err) + return err; + + if (ks->reset_gpio) { + /* + * If a reset line was obtained, wait for 100us after + * de-asserting RESET before accessing any registers, see + * the KS8995MA datasheet, page 44. + */ + gpiod_set_value_cansleep(ks->reset_gpio, 0); + udelay(100); + } + + spi_set_drvdata(spi, ks); + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err) { + dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); + return err; + } + + err = ks8995_get_revision(ks); + if (err) + return err; + + err = ks8995_reset(ks); + if (err) + return err; + + dev_info(&spi->dev, "%s device found, Chip ID:%x, Revision:%x\n", + ks->chip->name, ks->chip->chip_id, ks->revision_id); + + err = ks8995_check_config(ks); + if (err) + return err; + + ks->ds = devm_kzalloc(&spi->dev, sizeof(*ks->ds), GFP_KERNEL); + if (!ks->ds) + return -ENOMEM; + + ks->ds->dev = &spi->dev; + ks->ds->num_ports = KS8995_NUM_PORTS; + ks->ds->ops = &ks8995_ds_ops; + ks->ds->phylink_mac_ops = &ks8995_phylink_mac_ops; + ks->ds->priv = ks; + + err = dsa_register_switch(ks->ds); + if (err) + return dev_err_probe(&spi->dev, err, + "unable to register DSA switch\n"); + + return 0; +} + +static void ks8995_remove(struct spi_device *spi) +{ + struct ks8995_switch *ks = spi_get_drvdata(spi); + + dsa_unregister_switch(ks->ds); + /* assert reset */ + gpiod_set_value_cansleep(ks->reset_gpio, 1); +} + +/* ------------------------------------------------------------------------ */ +static struct spi_driver ks8995_driver = { + .driver = { + .name = "spi-ks8995", + .of_match_table = ks8995_spi_of_match, + }, + .probe = ks8995_probe, + .remove = ks8995_remove, + .id_table = ks8995_id, +}; + +module_spi_driver(ks8995_driver); + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lantiq/Kconfig b/drivers/net/dsa/lantiq/Kconfig new file mode 100644 index 000000000000..4a9771be5d58 --- /dev/null +++ b/drivers/net/dsa/lantiq/Kconfig @@ -0,0 +1,24 @@ +config NET_DSA_LANTIQ_COMMON + tristate + select REGMAP + +config NET_DSA_LANTIQ_GSWIP + tristate "Lantiq / Intel GSWIP" + depends on HAS_IOMEM + select NET_DSA_TAG_GSWIP + select NET_DSA_LANTIQ_COMMON + help + This enables support for the Lantiq / Intel GSWIP 2.1 found in + the xrx200 / VR9 SoC. + +config NET_DSA_MXL_GSW1XX + tristate "MaxLinear GSW1xx Ethernet switch support" + select NET_DSA_TAG_MXL_GSW1XX + select NET_DSA_LANTIQ_COMMON + help + This enables support for the MaxLinear GSW1xx family of 1GE switches + GSW120 4 port, 2 PHYs, RGMII & SGMII/2500Base-X + GSW125 4 port, 2 PHYs, RGMII & SGMII/2500Base-X, industrial temperature + GSW140 6 port, 4 PHYs, RGMII & SGMII/2500Base-X + GSW141 6 port, 4 PHYs, RGMII & SGMII + GSW145 6 port, 4 PHYs, RGMII & SGMII/2500Base-X, industrial temperature diff --git a/drivers/net/dsa/lantiq/Makefile b/drivers/net/dsa/lantiq/Makefile new file mode 100644 index 000000000000..85fce605310b --- /dev/null +++ b/drivers/net/dsa/lantiq/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o +obj-$(CONFIG_NET_DSA_LANTIQ_COMMON) += lantiq_gswip_common.o +obj-$(CONFIG_NET_DSA_MXL_GSW1XX) += mxl-gsw1xx.o diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.c b/drivers/net/dsa/lantiq/lantiq_gswip.c new file mode 100644 index 000000000000..57dd063c0740 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip.c @@ -0,0 +1,518 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include "lantiq_gswip.h" +#include "lantiq_pce.h" + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <dt-bindings/mips/lantiq_rcu_gphy.h> + +#include <net/dsa.h> + +struct xway_gphy_match_data { + char *fe_firmware_name; + char *ge_firmware_name; +}; + +static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + case 0: + case 1: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_MII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_REVMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + + case 2: + case 3: + case 4: + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + + case 5: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + } + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; +} + +static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + case 0: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + + case 1: + case 2: + case 3: + case 4: + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + + case 5: + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + break; + } + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; +} + +static const struct xway_gphy_match_data xrx200a1x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", +}; + +static const struct xway_gphy_match_data xrx200a2x_gphy_data = { + .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", + .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", +}; + +static const struct xway_gphy_match_data xrx300_gphy_data = { + .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", + .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", +}; + +static const struct of_device_id xway_gphy_match[] __maybe_unused = { + { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL }, + { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data }, + { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data }, + { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data }, + { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data }, + {}, +}; + +static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw) +{ + struct device *dev = priv->dev; + const struct firmware *fw; + void *fw_addr; + dma_addr_t dma_addr; + dma_addr_t dev_addr; + size_t size; + int ret; + + ret = clk_prepare_enable(gphy_fw->clk_gate); + if (ret) + return ret; + + reset_control_assert(gphy_fw->reset); + + /* The vendor BSP uses a 200ms delay after asserting the reset line. + * Without this some users are observing that the PHY is not coming up + * on the MDIO bus. + */ + msleep(200); + + ret = request_firmware(&fw, gphy_fw->fw_name, dev); + if (ret) + return dev_err_probe(dev, ret, "failed to load firmware: %s\n", + gphy_fw->fw_name); + + /* GPHY cores need the firmware code in a persistent and contiguous + * memory area with a 16 kB boundary aligned start address. + */ + size = fw->size + XRX200_GPHY_FW_ALIGN; + + fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); + if (fw_addr) { + fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); + dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); + memcpy(fw_addr, fw->data, fw->size); + } else { + release_firmware(fw); + return -ENOMEM; + } + + release_firmware(fw); + + ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr); + if (ret) + return ret; + + reset_control_deassert(gphy_fw->reset); + + return ret; +} + +static int gswip_gphy_fw_probe(struct gswip_priv *priv, + struct gswip_gphy_fw *gphy_fw, + struct device_node *gphy_fw_np, int i) +{ + struct device *dev = priv->dev; + u32 gphy_mode; + int ret; + char gphyname[10]; + + snprintf(gphyname, sizeof(gphyname), "gphy%d", i); + + gphy_fw->clk_gate = devm_clk_get(dev, gphyname); + if (IS_ERR(gphy_fw->clk_gate)) { + return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate), + "Failed to lookup gate clock\n"); + } + + ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset); + if (ret) + return ret; + + ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode); + /* Default to GE mode */ + if (ret) + gphy_mode = GPHY_MODE_GE; + + switch (gphy_mode) { + case GPHY_MODE_FE: + gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name; + break; + case GPHY_MODE_GE: + gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name; + break; + default: + return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n", + gphy_mode); + } + + gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np); + if (IS_ERR(gphy_fw->reset)) + return dev_err_probe(dev, PTR_ERR(gphy_fw->reset), + "Failed to lookup gphy reset\n"); + + return gswip_gphy_fw_load(priv, gphy_fw); +} + +static void gswip_gphy_fw_remove(struct gswip_priv *priv, + struct gswip_gphy_fw *gphy_fw) +{ + int ret; + + /* check if the device was fully probed */ + if (!gphy_fw->fw_name) + return; + + ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0); + if (ret) + dev_err(priv->dev, "can not reset GPHY FW pointer\n"); + + clk_disable_unprepare(gphy_fw->clk_gate); + + reset_control_put(gphy_fw->reset); +} + +static int gswip_gphy_fw_list(struct gswip_priv *priv, + struct device_node *gphy_fw_list_np, u32 version) +{ + struct device *dev = priv->dev; + struct device_node *gphy_fw_np; + const struct of_device_id *match; + int err; + int i = 0; + + /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older + * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also + * needs a different GPHY firmware. + */ + if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) { + switch (version) { + case GSWIP_VERSION_2_0: + priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data; + break; + case GSWIP_VERSION_2_1: + priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data; + break; + default: + return dev_err_probe(dev, -ENOENT, + "unknown GSWIP version: 0x%x\n", + version); + } + } + + match = of_match_node(xway_gphy_match, gphy_fw_list_np); + if (match && match->data) + priv->gphy_fw_name_cfg = match->data; + + if (!priv->gphy_fw_name_cfg) + return dev_err_probe(dev, -ENOENT, + "GPHY compatible type not supported\n"); + + priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np); + if (!priv->num_gphy_fw) + return -ENOENT; + + priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np, + "lantiq,rcu"); + if (IS_ERR(priv->rcu_regmap)) + return PTR_ERR(priv->rcu_regmap); + + priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw, + sizeof(*priv->gphy_fw), + GFP_KERNEL | __GFP_ZERO); + if (!priv->gphy_fw) + return -ENOMEM; + + for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) { + err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i], + gphy_fw_np, i); + if (err) { + of_node_put(gphy_fw_np); + goto remove_gphy; + } + i++; + } + + /* The standalone PHY11G requires 300ms to be fully + * initialized and ready for any MDIO communication after being + * taken out of reset. For the SoC-internal GPHY variant there + * is no (known) documentation for the minimum time after a + * reset. Use the same value as for the standalone variant as + * some users have reported internal PHYs not being detected + * without any delay. + */ + msleep(300); + + return 0; + +remove_gphy: + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + return err; +} + +static const struct regmap_config sw_regmap_config = { + .name = "switch", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_SDMA_PCTRLp(6), +}; + +static const struct regmap_config mdio_regmap_config = { + .name = "mdio", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_MDIO_PHYp(0), +}; + +static const struct regmap_config mii_regmap_config = { + .name = "mii", + .reg_bits = 32, + .val_bits = 32, + .reg_shift = REGMAP_UPSHIFT(2), + .val_format_endian = REGMAP_ENDIAN_NATIVE, + .max_register = GSWIP_MII_CFGp(6), +}; + +static int gswip_probe(struct platform_device *pdev) +{ + struct device_node *np, *gphy_fw_np; + __iomem void *gswip, *mdio, *mii; + struct device *dev = &pdev->dev; + struct gswip_priv *priv; + int err; + int i; + u32 version; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + gswip = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gswip)) + return PTR_ERR(gswip); + + mdio = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(mdio)) + return PTR_ERR(mdio); + + mii = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(mii)) + return PTR_ERR(mii); + + priv->gswip = devm_regmap_init_mmio(dev, gswip, &sw_regmap_config); + if (IS_ERR(priv->gswip)) + return PTR_ERR(priv->gswip); + + priv->mdio = devm_regmap_init_mmio(dev, mdio, &mdio_regmap_config); + if (IS_ERR(priv->mdio)) + return PTR_ERR(priv->mdio); + + priv->mii = devm_regmap_init_mmio(dev, mii, &mii_regmap_config); + if (IS_ERR(priv->mii)) + return PTR_ERR(priv->mii); + + priv->hw_info = of_device_get_match_data(dev); + if (!priv->hw_info) + return -EINVAL; + + priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->dev = dev; + + regmap_read(priv->gswip, GSWIP_VERSION, &version); + + np = dev->of_node; + switch (version) { + case GSWIP_VERSION_2_0: + case GSWIP_VERSION_2_1: + if (!of_device_is_compatible(np, "lantiq,xrx200-gswip")) + return -EINVAL; + break; + case GSWIP_VERSION_2_2: + case GSWIP_VERSION_2_2_ETC: + if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") && + !of_device_is_compatible(np, "lantiq,xrx330-gswip")) + return -EINVAL; + break; + default: + return dev_err_probe(dev, -ENOENT, + "unknown GSWIP version: 0x%x\n", version); + } + + /* bring up the mdio bus */ + gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw"); + if (gphy_fw_np) { + err = gswip_gphy_fw_list(priv, gphy_fw_np, version); + of_node_put(gphy_fw_np); + if (err) + return dev_err_probe(dev, err, + "gphy fw probe failed\n"); + } + + err = gswip_probe_common(priv, version); + if (err) + goto gphy_fw_remove; + + platform_set_drvdata(pdev, priv); + + return 0; + +gphy_fw_remove: + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); + return err; +} + +static void gswip_remove(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + int i; + + if (!priv) + return; + + /* disable the switch */ + gswip_disable_switch(priv); + + dsa_unregister_switch(priv->ds); + + for (i = 0; i < priv->num_gphy_fw; i++) + gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); +} + +static void gswip_shutdown(struct platform_device *pdev) +{ + struct gswip_priv *priv = platform_get_drvdata(pdev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + platform_set_drvdata(pdev, NULL); +} + +static const struct gswip_hw_info gswip_xrx200 = { + .max_ports = 7, + .allowed_cpu_ports = BIT(6), + .mii_ports = BIT(0) | BIT(1) | BIT(5), + .mii_port_reg_offset = 0, + .phylink_get_caps = gswip_xrx200_phylink_get_caps, + .pce_microcode = &gswip_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_GSWIP, +}; + +static const struct gswip_hw_info gswip_xrx300 = { + .max_ports = 7, + .allowed_cpu_ports = BIT(6), + .mii_ports = BIT(0) | BIT(5), + .mii_port_reg_offset = 0, + .phylink_get_caps = gswip_xrx300_phylink_get_caps, + .pce_microcode = &gswip_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_GSWIP, +}; + +static const struct of_device_id gswip_of_match[] = { + { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, + { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, + { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, + {}, +}; +MODULE_DEVICE_TABLE(of, gswip_of_match); + +static struct platform_driver gswip_driver = { + .probe = gswip_probe, + .remove = gswip_remove, + .shutdown = gswip_shutdown, + .driver = { + .name = "gswip", + .of_match_table = gswip_of_match, + }, +}; + +module_platform_driver(gswip_driver); + +MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); +MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.h b/drivers/net/dsa/lantiq/lantiq_gswip.h new file mode 100644 index 000000000000..9c38e51a75e8 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip.h @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifndef __LANTIQ_GSWIP_H +#define __LANTIQ_GSWIP_H + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/phylink.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/swab.h> +#include <net/dsa.h> + +/* GSWIP MDIO Registers */ +#define GSWIP_MDIO_GLOB 0x00 +#define GSWIP_MDIO_GLOB_ENABLE BIT(15) +#define GSWIP_MDIO_CTRL 0x08 +#define GSWIP_MDIO_CTRL_BUSY BIT(12) +#define GSWIP_MDIO_CTRL_RD BIT(11) +#define GSWIP_MDIO_CTRL_WR BIT(10) +#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f +#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5 +#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f +#define GSWIP_MDIO_READ 0x09 +#define GSWIP_MDIO_WRITE 0x0A +#define GSWIP_MDIO_MDC_CFG0 0x0B +#define GSWIP_MDIO_MDC_CFG1 0x0C +#define GSWIP_MDIO_PHYp(p) (0x15 - (p)) +#define GSWIP_MDIO_PHY_LINK_MASK 0x6000 +#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000 +#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000 +#define GSWIP_MDIO_PHY_LINK_UP 0x2000 +#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800 +#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800 +#define GSWIP_MDIO_PHY_SPEED_M10 0x0000 +#define GSWIP_MDIO_PHY_SPEED_M100 0x0800 +#define GSWIP_MDIO_PHY_SPEED_G1 0x1000 +#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600 +#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FDUP_EN 0x0200 +#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600 +#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180 +#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100 +#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180 +#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060 +#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000 +#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020 +#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060 +#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f +#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \ + GSWIP_MDIO_PHY_FCONRX_MASK | \ + GSWIP_MDIO_PHY_FCONTX_MASK | \ + GSWIP_MDIO_PHY_LINK_MASK | \ + GSWIP_MDIO_PHY_SPEED_MASK | \ + GSWIP_MDIO_PHY_FDUP_MASK) + +/* GSWIP MII Registers */ +#define GSWIP_MII_CFGp(p) (0x2 * (p)) +#define GSWIP_MII_CFG_RESET BIT(15) +#define GSWIP_MII_CFG_EN BIT(14) +#define GSWIP_MII_CFG_ISOLATE BIT(13) +#define GSWIP_MII_CFG_LDCLKDIS BIT(12) +#define GSWIP_MII_CFG_RGMII_IBS BIT(8) +#define GSWIP_MII_CFG_RMII_CLK BIT(7) +#define GSWIP_MII_CFG_MODE_MIIP 0x0 +#define GSWIP_MII_CFG_MODE_MIIM 0x1 +#define GSWIP_MII_CFG_MODE_RMIIP 0x2 +#define GSWIP_MII_CFG_MODE_RMIIM 0x3 +#define GSWIP_MII_CFG_MODE_RGMII 0x4 +#define GSWIP_MII_CFG_MODE_GMII 0x9 +#define GSWIP_MII_CFG_MODE_MASK 0xf +#define GSWIP_MII_CFG_RATE_M2P5 0x00 +#define GSWIP_MII_CFG_RATE_M25 0x10 +#define GSWIP_MII_CFG_RATE_M125 0x20 +#define GSWIP_MII_CFG_RATE_M50 0x30 +#define GSWIP_MII_CFG_RATE_AUTO 0x40 +#define GSWIP_MII_CFG_RATE_MASK 0x70 +#define GSWIP_MII_PCDU0 0x01 +#define GSWIP_MII_PCDU1 0x03 +#define GSWIP_MII_PCDU5 0x05 +#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0) +#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7) +#define GSWIP_MII_PCDU_TXDLY(x) u16_encode_bits(((x) / 500), GSWIP_MII_PCDU_TXDLY_MASK) +#define GSWIP_MII_PCDU_RXDLY(x) u16_encode_bits(((x) / 500), GSWIP_MII_PCDU_RXDLY_MASK) +#define GSWIP_MII_PCDU_RXDLY_DEFAULT 2000 /* picoseconds */ +#define GSWIP_MII_PCDU_TXDLY_DEFAULT 2000 /* picoseconds */ + +/* GSWIP Core Registers */ +#define GSWIP_SWRES 0x000 +#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */ +#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */ +#define GSWIP_VERSION 0x013 +#define GSWIP_VERSION_REV_MASK GENMASK(7, 0) +#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8) +#define GSWIP_VERSION_REV(v) FIELD_GET(GSWIP_VERSION_REV_MASK, v) +#define GSWIP_VERSION_MOD(v) FIELD_GET(GSWIP_VERSION_MOD_MASK, v) +#define GSWIP_VERSION_2_0 0x100 +#define GSWIP_VERSION_2_1 0x021 +#define GSWIP_VERSION_2_2 0x122 +#define GSWIP_VERSION_2_2_ETC 0x022 +/* The hardware has the 'major/minor' version bytes in the wrong order + * preventing numerical comparisons. Swap the bytes of the 16-bit value + * to end up with REV being the most significant byte and MOD being the + * least significant byte, which then allows comparing it with the + * value stored in struct gswip_priv. + */ +#define GSWIP_VERSION_GE(priv, ver) ((priv)->version >= swab16(ver)) + +#define GSWIP_BM_RAM_VAL(x) (0x043 - (x)) +#define GSWIP_BM_RAM_ADDR 0x044 +#define GSWIP_BM_RAM_CTRL 0x045 +#define GSWIP_BM_RAM_CTRL_BAS BIT(15) +#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5) +#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0) +#define GSWIP_BM_QUEUE_GCTRL 0x04A +#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10) +/* buffer management Port Configuration Register */ +#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2)) +#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */ +#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */ +/* buffer management Port Control Register */ +#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2)) +#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */ +#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */ + +/* PCE */ +#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x)) +#define GSWIP_PCE_TBL_MASK 0x448 +#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x)) +#define GSWIP_PCE_TBL_ADDR 0x44E +#define GSWIP_PCE_TBL_CTRL 0x44F +#define GSWIP_PCE_TBL_CTRL_BAS BIT(15) +#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13) +#define GSWIP_PCE_TBL_CTRL_VLD BIT(12) +#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11) +#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7) +#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5) +#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00 +#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20 +#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40 +#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60 +#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0) +#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */ +#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */ +#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */ +#define GSWIP_PCE_GCTRL_0 0x456 +#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */ +#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3) +#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */ +#define GSWIP_PCE_GCTRL_1 0x457 +#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */ +#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */ +#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA)) +#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */ +#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */ +#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */ +#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0 +#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1 +#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2 +#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3 +#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7 +#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0) +/* Ethernet Switch PCE Port Control Register 3 */ +#define GSWIP_PCE_PCTRL_3p(p) (0x483 + ((p) * 0xA)) +#define GSWIP_PCE_PCTRL_3_LNDIS BIT(15) /* Learning Disable */ +#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA)) +#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */ +#define GSWIP_PCE_VCTRL_VINR GENMASK(2, 1) /* VLAN Ingress Tag Rule */ +#define GSWIP_PCE_VCTRL_VINR_ALL 0 /* Admit tagged and untagged packets */ +#define GSWIP_PCE_VCTRL_VINR_TAGGED 1 /* Admit only tagged packets */ +#define GSWIP_PCE_VCTRL_VINR_UNTAGGED 2 /* Admit only untagged packets */ +#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */ +#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */ +#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */ +#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */ +#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) + +#define GSWIP_MAC_FLEN 0x8C5 +#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_0_PADEN BIT(8) +#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) +#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 +#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 +#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 +#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 +#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 +#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C +#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 +#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C +#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 +#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 +#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 +#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ +#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ +#define GSWIP_MAC_CTRL_4p(p) (0x907 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_4_LPIEN BIT(7) /* LPI Mode Enable */ +#define GSWIP_MAC_CTRL_4_GWAIT_MASK GENMASK(14, 8) /* LPI Wait Time 1G */ +#define GSWIP_MAC_CTRL_4_GWAIT(t) u16_encode_bits((t), GSWIP_MAC_CTRL_4_GWAIT_MASK) +#define GSWIP_MAC_CTRL_4_WAIT_MASK GENMASK(6, 0) /* LPI Wait Time 100M */ +#define GSWIP_MAC_CTRL_4_WAIT(t) u16_encode_bits((t), GSWIP_MAC_CTRL_4_WAIT_MASK) + +/* Ethernet Switch Fetch DMA Port Control Register */ +#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6)) +#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */ +#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */ +#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */ +#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */ +#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) +#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) + +/* Ethernet Switch Store DMA Port Control Register */ +#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) +#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ +#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ +#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ + +#define GSWIP_TABLE_ACTIVE_VLAN 0x01 +#define GSWIP_TABLE_VLAN_MAPPING 0x02 +#define GSWIP_TABLE_MAC_BRIDGE 0x0b +#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */ +#define GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID BIT(1) /* Valid bit */ + +#define XRX200_GPHY_FW_ALIGN (16 * 1024) + +/* Maximum packet size supported by the switch. In theory this should be 10240, + * but long packets currently cause lock-ups with an MTU of over 2526. Medium + * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP + * over 2526), hence an MTU value of 2400 seems safe. This issue only affects + * packet reception. This is probably caused by the PPA engine, which is on the + * RX part of the device. Packet transmission works properly up to 10240. + */ +#define GSWIP_MAX_PACKET_LENGTH 2400 + +#define GSWIP_VLAN_UNAWARE_PVID 0 + +struct gswip_pce_microcode { + u16 val_3; + u16 val_2; + u16 val_1; + u16 val_0; +}; + +struct gswip_hw_info { + int max_ports; + unsigned int allowed_cpu_ports; + unsigned int mii_ports; + int mii_port_reg_offset; + bool supports_2500m; + const struct gswip_pce_microcode (*pce_microcode)[]; + size_t pce_microcode_size; + enum dsa_tag_protocol tag_protocol; + void (*phylink_get_caps)(struct dsa_switch *ds, int port, + struct phylink_config *config); + struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config, + phy_interface_t interface); +}; + +struct gswip_gphy_fw { + struct clk *clk_gate; + struct reset_control *reset; + u32 fw_addr_offset; + char *fw_name; +}; + +struct gswip_vlan { + struct net_device *bridge; + u16 vid; + u8 fid; +}; + +struct gswip_priv { + struct regmap *gswip; + struct regmap *mdio; + struct regmap *mii; + const struct gswip_hw_info *hw_info; + const struct xway_gphy_match_data *gphy_fw_name_cfg; + struct dsa_switch *ds; + struct device *dev; + struct regmap *rcu_regmap; + struct gswip_vlan vlans[64]; + int num_gphy_fw; + struct gswip_gphy_fw *gphy_fw; + struct mutex pce_table_lock; + u16 version; +}; + +void gswip_disable_switch(struct gswip_priv *priv); + +int gswip_probe_common(struct gswip_priv *priv, u32 version); + +#endif /* __LANTIQ_GSWIP_H */ diff --git a/drivers/net/dsa/lantiq/lantiq_gswip_common.c b/drivers/net/dsa/lantiq/lantiq_gswip_common.c new file mode 100644 index 000000000000..9da39edf8f57 --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip_common.c @@ -0,0 +1,1739 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lantiq / Intel / MaxLinear GSWIP common function library + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + * + * The VLAN and bridge model the GSWIP hardware uses does not directly + * matches the model DSA uses. + * + * The hardware has 64 possible table entries for bridges with one VLAN + * ID, one flow id and a list of ports for each bridge. All entries which + * match the same flow ID are combined in the mac learning table, they + * act as one global bridge. + * The hardware does not support VLAN filter on the port, but on the + * bridge, this driver converts the DSA model to the hardware. + * + * The CPU gets all the exception frames which do not match any forwarding + * rule and the CPU port is also added to all bridges. This makes it possible + * to handle all the special cases easily in software. + * At the initialization the driver allocates one bridge table entry for + * each switch port which is used when the port is used without an + * explicit bridge. This prevents the frames from being forwarded + * between all LAN ports by default. + */ + +#include "lantiq_gswip.h" + +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> +#include <linux/phy.h> +#include <linux/phylink.h> +#include <linux/regmap.h> +#include <net/dsa.h> + +struct gswip_pce_table_entry { + u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index + u16 table; // PCE_TBL_CTRL.ADDR = pData->table + u16 key[8]; + u16 val[5]; + u16 mask; + u8 gmap; + bool type; + bool valid; + bool key_mode; +}; + +struct gswip_rmon_cnt_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} + +static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { + /** Receive Packet Count (only packets that are accepted and not discarded). */ + MIB_DESC(1, 0x1F, "RxGoodPkts"), + MIB_DESC(1, 0x23, "RxUnicastPkts"), + MIB_DESC(1, 0x22, "RxMulticastPkts"), + MIB_DESC(1, 0x21, "RxFCSErrorPkts"), + MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), + MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), + MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), + MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), + MIB_DESC(1, 0x20, "RxGoodPausePkts"), + MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), + MIB_DESC(1, 0x12, "Rx64BytePkts"), + MIB_DESC(1, 0x13, "Rx127BytePkts"), + MIB_DESC(1, 0x14, "Rx255BytePkts"), + MIB_DESC(1, 0x15, "Rx511BytePkts"), + MIB_DESC(1, 0x16, "Rx1023BytePkts"), + /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x17, "RxMaxBytePkts"), + MIB_DESC(1, 0x18, "RxDroppedPkts"), + MIB_DESC(1, 0x19, "RxFilteredPkts"), + MIB_DESC(2, 0x24, "RxGoodBytes"), + MIB_DESC(2, 0x26, "RxBadBytes"), + MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), + MIB_DESC(1, 0x0C, "TxGoodPkts"), + MIB_DESC(1, 0x06, "TxUnicastPkts"), + MIB_DESC(1, 0x07, "TxMulticastPkts"), + MIB_DESC(1, 0x00, "Tx64BytePkts"), + MIB_DESC(1, 0x01, "Tx127BytePkts"), + MIB_DESC(1, 0x02, "Tx255BytePkts"), + MIB_DESC(1, 0x03, "Tx511BytePkts"), + MIB_DESC(1, 0x04, "Tx1023BytePkts"), + /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x05, "TxMaxBytePkts"), + MIB_DESC(1, 0x08, "TxSingleCollCount"), + MIB_DESC(1, 0x09, "TxMultCollCount"), + MIB_DESC(1, 0x0A, "TxLateCollCount"), + MIB_DESC(1, 0x0B, "TxExcessCollCount"), + MIB_DESC(1, 0x0D, "TxPauseCount"), + MIB_DESC(1, 0x10, "TxDroppedPkts"), + MIB_DESC(2, 0x0E, "TxGoodBytes"), +}; + +static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, + u32 cleared) +{ + u32 val; + + return regmap_read_poll_timeout(priv->gswip, offset, val, + !(val & cleared), 20, 50000); +} + +static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set, + int port) +{ + int reg_port; + + /* MII_CFG register only exists for MII ports */ + if (!(priv->hw_info->mii_ports & BIT(port))) + return; + + reg_port = port + priv->hw_info->mii_port_reg_offset; + + regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask, + set); +} + +static int gswip_mdio_poll(struct gswip_priv *priv) +{ + u32 ctrl; + + return regmap_read_poll_timeout(priv->mdio, GSWIP_MDIO_CTRL, ctrl, + !(ctrl & GSWIP_MDIO_CTRL_BUSY), 40, 4000); +} + +static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct gswip_priv *priv = bus->priv; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_WRITE, val); + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + return 0; +} + +static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) +{ + struct gswip_priv *priv = bus->priv; + u32 val; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + err = regmap_read(priv->mdio, GSWIP_MDIO_READ, &val); + if (err) + return err; + + return val; +} + +static int gswip_mdio(struct gswip_priv *priv) +{ + struct device_node *mdio_np, *switch_np = priv->dev->of_node; + struct device *dev = priv->dev; + struct mii_bus *bus; + int err = 0; + + mdio_np = of_get_compatible_child(switch_np, "lantiq,xrx200-mdio"); + if (!mdio_np) + mdio_np = of_get_child_by_name(switch_np, "mdio"); + + if (!of_device_is_available(mdio_np)) + goto out_put_node; + + bus = devm_mdiobus_alloc(dev); + if (!bus) { + err = -ENOMEM; + goto out_put_node; + } + + bus->priv = priv; + bus->read = gswip_mdio_rd; + bus->write = gswip_mdio_wr; + bus->name = "lantiq,xrx200-mdio"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + err = devm_of_mdiobus_register(dev, bus, mdio_np); + +out_put_node: + of_node_put(mdio_np); + + return err; +} + +static int gswip_pce_table_entry_read(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u32 tmp; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : + GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_BAS, + tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_KEY(i), &tmp); + if (err) + goto out_unlock; + tbl->key[i] = tmp; + } + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_VAL(i), &tmp); + if (err) + goto out_unlock; + tbl->val[i] = tmp; + } + + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_MASK, &tmp); + if (err) + goto out_unlock; + + tbl->mask = tmp; + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + if (err) + goto out_unlock; + + tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); + tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); + tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; + +out_unlock: + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +static int gswip_pce_table_entry_write(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) { + mutex_unlock(&priv->pce_table_lock); + return err; + } + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_KEY(i), tbl->key[i]); + + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(i), tbl->val[i]); + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, tbl->mask); + + regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | + GSWIP_PCE_TBL_CTRL_GMAP_MASK); + if (tbl->type) + crtl |= GSWIP_PCE_TBL_CTRL_TYPE; + if (tbl->valid) + crtl |= GSWIP_PCE_TBL_CTRL_VLD; + crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; + crtl |= GSWIP_PCE_TBL_CTRL_BAS; + regmap_write(priv->gswip, GSWIP_PCE_TBL_CTRL, crtl); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +/* Add the LAN port into a bridge with the CPU port by + * default. This prevents automatic forwarding of + * packages between the LAN ports when no explicit + * bridge is configured. + */ +static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + struct gswip_pce_table_entry vlan_mapping = {0,}; + int err; + + vlan_active.index = port + 1; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_active.val[0] = port + 1 /* fid */; + vlan_active.valid = add; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + if (!add) + return 0; + + vlan_mapping.index = port + 1; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + vlan_mapping.val[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_mapping.val[1] = BIT(port) | dsa_cpu_ports(priv->ds); + vlan_mapping.val[2] = 0; + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + return 0; +} + +static int gswip_port_set_learning(struct gswip_priv *priv, int port, + bool enable) +{ + if (!GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + return -EOPNOTSUPP; + + /* learning disable bit */ + return regmap_update_bits(priv->gswip, GSWIP_PCE_PCTRL_3p(port), + GSWIP_PCE_PCTRL_3_LNDIS, + enable ? 0 : GSWIP_PCE_PCTRL_3_LNDIS); +} + +static int gswip_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + unsigned long supported = 0; + + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + supported |= BR_LEARNING; + + if (flags.mask & ~supported) + return -EINVAL; + + return 0; +} + +static int gswip_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + + if (flags.mask & BR_LEARNING) + return gswip_port_set_learning(priv, port, + !!(flags.val & BR_LEARNING)); + + return 0; +} + +static int gswip_port_setup(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + int err; + + if (!dsa_is_cpu_port(ds, port)) { + err = gswip_add_single_port_br(priv, port, true); + if (err) + return err; + } + + return 0; +} + +static int gswip_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct gswip_priv *priv = ds->priv; + + if (!dsa_is_cpu_port(ds, port)) { + u32 mdio_phy = 0; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_ADDR_MASK, + mdio_phy); + } + + /* RMON Counter Enable for port */ + regmap_write(priv->gswip, GSWIP_BM_PCFGp(port), GSWIP_BM_PCFG_CNTEN); + + /* enable port fetch/store dma & VLAN Modification */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN | GSWIP_FDMA_PCTRL_VLANMOD_BOTH); + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + + return 0; +} + +static void gswip_port_disable(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + + regmap_clear_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN); + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); +} + +static int gswip_pce_load_microcode(struct gswip_priv *priv) +{ + int i; + int err; + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR); + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, 0); + + for (i = 0; i < priv->hw_info->pce_microcode_size; i++) { + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, i); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(0), + (*priv->hw_info->pce_microcode)[i].val_0); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(1), + (*priv->hw_info->pce_microcode)[i].val_1); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(2), + (*priv->hw_info->pce_microcode)[i].val_2); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(3), + (*priv->hw_info->pce_microcode)[i].val_3); + + /* start the table access: */ + regmap_set_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + return err; + } + + /* tell the switch that the microcode is loaded */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MC_VALID); + + return 0; +} + +static void gswip_port_commit_pvid(struct gswip_priv *priv, int port) +{ + struct dsa_port *dp = dsa_to_port(priv->ds, port); + struct net_device *br = dsa_port_bridge_dev_get(dp); + u32 vinr; + int idx; + + if (!dsa_port_is_user(dp)) + return; + + if (br) { + u16 pvid = GSWIP_VLAN_UNAWARE_PVID; + + if (br_vlan_enabled(br)) + br_vlan_get_pvid(br, &pvid); + + /* VLAN-aware bridge ports with no PVID will use Active VLAN + * index 0. The expectation is that this drops all untagged and + * VID-0 tagged ingress traffic. + */ + idx = 0; + for (int i = priv->hw_info->max_ports; + i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == br && + priv->vlans[i].vid == pvid) { + idx = i; + break; + } + } + } else { + /* The Active VLAN table index as configured by + * gswip_add_single_port_br() + */ + idx = port + 1; + } + + vinr = idx ? GSWIP_PCE_VCTRL_VINR_ALL : GSWIP_PCE_VCTRL_VINR_TAGGED; + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VINR, + FIELD_PREP(GSWIP_PCE_VCTRL_VINR, vinr)); + + /* Note that in GSWIP 2.2 VLAN mode the VID needs to be programmed + * directly instead of referencing the index in the Active VLAN Tablet. + * However, without the VLANMD bit (9) in PCE_GCTRL_1 (0x457) even + * GSWIP 2.2 and newer hardware maintain the GSWIP 2.1 behavior. + */ + regmap_write(priv->gswip, GSWIP_PCE_DEFPVID(port), idx); +} + +static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + + if (vlan_filtering) { + /* Use tag based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VSR | + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0, + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0); + regmap_clear_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } else { + /* Use port based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0 | + GSWIP_PCE_VCTRL_VSR, + GSWIP_PCE_VCTRL_VSR); + regmap_set_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp, + phy_interface_t interface) +{ + u32 tx_delay = GSWIP_MII_PCDU_TXDLY_DEFAULT; + u32 rx_delay = GSWIP_MII_PCDU_RXDLY_DEFAULT; + struct device_node *port_dn = dp->dn; + u16 mii_pcdu_reg; + + /* As MII_PCDU registers only exist for MII ports, silently return + * unless the port is an MII port + */ + if (!(priv->hw_info->mii_ports & BIT(dp->index))) + return; + + switch (dp->index + priv->hw_info->mii_port_reg_offset) { + case 0: + mii_pcdu_reg = GSWIP_MII_PCDU0; + break; + case 1: + mii_pcdu_reg = GSWIP_MII_PCDU1; + break; + case 5: + mii_pcdu_reg = GSWIP_MII_PCDU5; + break; + default: + return; + } + + /* legacy code to set default delays according to the interface mode */ + switch (interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + tx_delay = 0; + rx_delay = 0; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + rx_delay = 0; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + tx_delay = 0; + break; + default: + break; + } + + /* allow settings delays using device tree properties */ + of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay); + of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay); + + regmap_write_bits(priv->mii, mii_pcdu_reg, + GSWIP_MII_PCDU_TXDLY_MASK | + GSWIP_MII_PCDU_RXDLY_MASK, + GSWIP_MII_PCDU_TXDLY(tx_delay) | + GSWIP_MII_PCDU_RXDLY(rx_delay)); +} + +static int gswip_setup(struct dsa_switch *ds) +{ + unsigned int cpu_ports = dsa_cpu_ports(ds); + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int err, i; + + regmap_write(priv->gswip, GSWIP_SWRES, GSWIP_SWRES_R0); + usleep_range(5000, 10000); + regmap_write(priv->gswip, GSWIP_SWRES, 0); + + /* disable port fetch/store dma on all ports */ + for (i = 0; i < priv->hw_info->max_ports; i++) { + gswip_port_disable(ds, i); + gswip_port_vlan_filtering(ds, i, false, NULL); + } + + /* enable Switch */ + regmap_set_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); + + err = gswip_pce_load_microcode(priv); + if (err) { + dev_err(priv->dev, "writing PCE microcode failed, %i\n", err); + return err; + } + + /* Default unknown Broadcast/Multicast/Unicast port maps */ + regmap_write(priv->gswip, GSWIP_PCE_PMAP1, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP2, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP3, cpu_ports); + + /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an + * interoperability problem with this auto polling mechanism because + * their status registers think that the link is in a different state + * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set + * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the + * auto polling state machine consider the link being negotiated with + * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads + * to the switch port being completely dead (RX and TX are both not + * working). + * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F + * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes + * it would work fine for a few minutes to hours and then stop, on + * other device it would no traffic could be sent or received at all. + * Testing shows that when PHY auto polling is disabled these problems + * go away. + */ + regmap_write(priv->mdio, GSWIP_MDIO_MDC_CFG0, 0x0); + + /* Configure the MDIO Clock 2.5 MHz */ + regmap_write_bits(priv->mdio, GSWIP_MDIO_MDC_CFG1, 0xff, 0x09); + + /* bring up the mdio bus */ + err = gswip_mdio(priv); + if (err) { + dev_err(priv->dev, "mdio bus setup failed\n"); + return err; + } + + /* Disable the xMII interface and clear it's isolation bit */ + for (i = 0; i < priv->hw_info->max_ports; i++) + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, + 0, i); + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + /* enable special tag insertion on cpu port */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(cpu_dp->index), + GSWIP_FDMA_PCTRL_STEN); + + /* accept special tag in ingress direction */ + regmap_set_bits(priv->gswip, + GSWIP_PCE_PCTRL_0p(cpu_dp->index), + GSWIP_PCE_PCTRL_0_INGRESS); + } + + regmap_set_bits(priv->gswip, GSWIP_BM_QUEUE_GCTRL, + GSWIP_BM_QUEUE_GCTRL_GL_MOD); + + /* VLAN aware Switching */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_VLAN); + + /* Flush MAC Table */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + if (err) { + dev_err(priv->dev, "MAC flushing didn't finish\n"); + return err; + } + + ds->mtu_enforcement_ingress = true; + + return 0; +} + +static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + struct gswip_priv *priv = ds->priv; + + return priv->hw_info->tag_protocol; +} + +static int gswip_vlan_active_create(struct gswip_priv *priv, + struct net_device *bridge, + int fid, u16 vid) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int err; + int i; + + /* Look for a free slot */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (!priv->vlans[i].bridge) { + idx = i; + break; + } + } + + if (idx == -1) + return -ENOSPC; + + if (fid == -1) + fid = idx; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = vid; + vlan_active.val[0] = fid; + vlan_active.valid = true; + + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + priv->vlans[idx].bridge = bridge; + priv->vlans[idx].vid = vid; + priv->vlans[idx].fid = fid; + + return idx; +} + +static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + int err; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.valid = false; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) + dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); + priv->vlans[idx].bridge = NULL; + + return err; +} + +static int gswip_vlan_add(struct gswip_priv *priv, struct net_device *bridge, + int port, u16 vid, bool untagged, bool pvid, + bool vlan_aware) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + unsigned int cpu_ports = dsa_cpu_ports(priv->ds); + bool active_vlan_created = false; + int fid = -1, idx = -1; + int i, err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + if (vlan_aware) { + if (fid != -1 && fid != priv->vlans[i].fid) + dev_err(priv->dev, "one bridge with multiple flow ids\n"); + fid = priv->vlans[i].fid; + } + if (priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + } + + /* If this bridge is not programmed yet, add a Active VLAN table + * entry in a free slot and prepare the VLAN mapping table entry. + */ + if (idx == -1) { + idx = gswip_vlan_active_create(priv, bridge, fid, vid); + if (idx < 0) + return idx; + active_vlan_created = true; + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + } else { + /* Read the existing VLAN mapping entry from the switch */ + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", + err); + return err; + } + } + + /* VLAN ID byte, maps to the VLAN ID of vlan active table */ + vlan_mapping.val[0] = vid; + /* Update the VLAN mapping entry and write it to the switch */ + vlan_mapping.val[1] |= cpu_ports; + vlan_mapping.val[1] |= BIT(port); + if (vlan_aware) + vlan_mapping.val[2] |= cpu_ports; + if (untagged) + vlan_mapping.val[2] &= ~BIT(port); + else + vlan_mapping.val[2] |= BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + /* In case an Active VLAN was creaetd delete it again */ + if (active_vlan_created) + gswip_vlan_active_remove(priv, idx); + return err; + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_vlan_remove(struct gswip_priv *priv, + struct net_device *bridge, int port, + u16 vid) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int i; + int err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + + if (idx == -1) { + dev_err(priv->dev, "Port %d cannot find VID %u of bridge %s\n", + port, vid, bridge ? bridge->name : "(null)"); + return -ENOENT; + } + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); + return err; + } + + vlan_mapping.val[1] &= ~BIT(port); + vlan_mapping.val[2] &= ~BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + /* In case all ports are removed from the bridge, remove the VLAN */ + if (!(vlan_mapping.val[1] & ~dsa_cpu_ports(priv->ds))) { + err = gswip_vlan_active_remove(priv, idx); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", + err); + return err; + } + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + int err; + + /* Set up the VLAN for VLAN-unaware bridging for this port, and remove + * it from the "single-port bridge" through which it was operating as + * standalone. + */ + err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, + true, true, false); + if (err) + return err; + + return gswip_add_single_port_br(priv, port, false); +} + +static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + + /* Add the port back to the "single-port bridge", and remove it from + * the VLAN-unaware PVID created for this bridge. + */ + gswip_add_single_port_br(priv, port, true); + gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID); +} + +static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + unsigned int max_ports = priv->hw_info->max_ports; + int pos = max_ports; + int i, idx = -1; + + /* We only support VLAN filtering on bridges */ + if (!dsa_is_cpu_port(ds, port) && !bridge) + return -EOPNOTSUPP; + + /* Check if there is already a page for this VLAN */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vlan->vid) { + idx = i; + break; + } + } + + /* If this VLAN is not programmed yet, we have to reserve + * one entry in the VLAN table. Make sure we start at the + * next position round. + */ + if (idx == -1) { + /* Look for a free slot */ + for (; pos < ARRAY_SIZE(priv->vlans); pos++) { + if (!priv->vlans[pos].bridge) { + idx = pos; + pos++; + break; + } + } + + if (idx == -1) { + NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); + return -ENOSPC; + } + } + + return 0; +} + +static int gswip_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + int err; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + err = gswip_port_vlan_prepare(ds, port, vlan, extack); + if (err) + return err; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_add(priv, bridge, port, vlan->vid, untagged, pvid, + true); +} + +static int gswip_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_remove(priv, bridge, port, vlan->vid); +} + +static void gswip_port_fast_age(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to read mac bridge: %d\n", + err); + return; + } + + if (!mac_bridge.valid) + continue; + + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) + continue; + + if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) + continue; + + mac_bridge.valid = false; + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to write mac bridge: %d\n", + err); + return; + } + } +} + +static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct gswip_priv *priv = ds->priv; + u32 stp_state; + + switch (state) { + case BR_STATE_DISABLED: + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + return; + case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; + break; + case BR_STATE_LEARNING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; + break; + case BR_STATE_FORWARDING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; + break; + default: + dev_err(priv->dev, "invalid STP state: %d\n", state); + return; + } + + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + regmap_write_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_PSTATE_MASK, + stp_state); +} + +static int gswip_port_fdb(struct dsa_switch *ds, int port, + struct net_device *bridge, const unsigned char *addr, + u16 vid, bool add) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int fid = -1; + int i; + int err; + + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + fid = priv->vlans[i].fid; + break; + } + } + + if (fid == -1) { + dev_err(priv->dev, "no FID found for bridge %s\n", + bridge->name); + return -EINVAL; + } + + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.key_mode = true; + mac_bridge.key[0] = addr[5] | (addr[4] << 8); + mac_bridge.key[1] = addr[3] | (addr[2] << 8); + mac_bridge.key[2] = addr[1] | (addr[0] << 8); + mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid); + mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2_ETC)) + mac_bridge.val[1] = add ? (GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC | + GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID) : 0; + else + mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC; + + mac_bridge.valid = add; + + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) + dev_err(priv->dev, "failed to write mac bridge: %d\n", err); + + return err; +} + +static int gswip_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, true); +} + +static int gswip_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, false); +} + +static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned char addr[ETH_ALEN]; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, + "failed to read mac bridge entry %d: %d\n", + i, err); + return err; + } + + if (!mac_bridge.valid) + continue; + + addr[5] = mac_bridge.key[0] & 0xff; + addr[4] = (mac_bridge.key[0] >> 8) & 0xff; + addr[3] = mac_bridge.key[1] & 0xff; + addr[2] = (mac_bridge.key[1] >> 8) & 0xff; + addr[1] = mac_bridge.key[2] & 0xff; + addr[0] = (mac_bridge.key[2] >> 8) & 0xff; + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) { + if (mac_bridge.val[0] & BIT(port)) { + err = cb(addr, 0, true, data); + if (err) + return err; + } + } else { + if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) { + err = cb(addr, 0, false, data); + if (err) + return err; + } + } + } + return 0; +} + +static int gswip_port_max_mtu(struct dsa_switch *ds, int port) +{ + /* Includes 8 bytes for special header. */ + return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; +} + +static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct gswip_priv *priv = ds->priv; + + /* CPU port always has maximum mtu of user ports, so use it to set + * switch frame size, including 8 byte special header. + */ + if (dsa_is_cpu_port(ds, port)) { + new_mtu += 8; + regmap_write(priv->gswip, GSWIP_MAC_FLEN, + VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN); + } + + /* Enable MLEN for ports with non-standard MTUs, including the special + * header on the CPU port added above. + */ + if (new_mtu != ETH_DATA_LEN) + regmap_set_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + else + regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + + return 0; +} + +static void gswip_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct gswip_priv *priv = ds->priv; + + priv->hw_info->phylink_get_caps(ds, port, config); +} + +static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +{ + u32 mdio_phy; + + if (link) + mdio_phy = GSWIP_MDIO_PHY_LINK_UP; + else + mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_LINK_MASK, mdio_phy); +} + +static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, + phy_interface_t interface) +{ + u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; + + switch (speed) { + case SPEED_10: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M2P5; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_100: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M25; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_1000: + mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; + + mii_cfg = GSWIP_MII_CFG_RATE_M125; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; + break; + } + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy); + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0); +} + +static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) +{ + u32 mac_ctrl_0, mdio_phy; + + if (duplex == DUPLEX_FULL) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; + mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; + mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy); +} + +static void gswip_port_set_pause(struct gswip_priv *priv, int port, + bool tx_pause, bool rx_pause) +{ + u32 mac_ctrl_0, mdio_phy; + + if (tx_pause && rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_EN; + } else if (tx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_DIS; + } else if (rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FCON_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FCONTX_MASK | GSWIP_MDIO_PHY_FCONRX_MASK, + mdio_phy); +} + +static void gswip_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + u32 miicfg = 0; + + miicfg |= GSWIP_MII_CFG_LDCLKDIS; + + switch (state->interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + return; + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_INTERNAL: + miicfg |= GSWIP_MII_CFG_MODE_MIIM; + break; + case PHY_INTERFACE_MODE_REVMII: + miicfg |= GSWIP_MII_CFG_MODE_MIIP; + break; + case PHY_INTERFACE_MODE_RMII: + miicfg |= GSWIP_MII_CFG_MODE_RMIIM; + if (of_property_read_bool(dp->dn, "maxlinear,rmii-refclk-out")) + miicfg |= GSWIP_MII_CFG_RMII_CLK; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; + case PHY_INTERFACE_MODE_GMII: + miicfg |= GSWIP_MII_CFG_MODE_GMII; + break; + default: + dev_err(dp->ds->dev, + "Unsupported interface: %d\n", state->interface); + return; + } + + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | + GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, + miicfg, port); + + gswip_mii_delay_setup(priv, dp, state->interface); +} + +static void gswip_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); + + if (!dsa_port_is_cpu(dp)) + gswip_port_set_link(priv, port, false); +} + +static void gswip_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + if (!dsa_port_is_cpu(dp) || interface != PHY_INTERFACE_MODE_INTERNAL) { + gswip_port_set_link(priv, port, true); + gswip_port_set_speed(priv, port, speed, interface); + gswip_port_set_duplex(priv, port, duplex); + gswip_port_set_pause(priv, port, tx_pause, rx_pause); + } + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, GSWIP_MII_CFG_EN, port); +} + +static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) + ethtool_puts(&data, gswip_rmon_cnt[i].name); +} + +static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, + u32 index) +{ + u32 result, val; + int err; + + regmap_write(priv->gswip, GSWIP_BM_RAM_ADDR, index); + regmap_write_bits(priv->gswip, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_ADDR_MASK | GSWIP_BM_RAM_CTRL_OPMOD | + GSWIP_BM_RAM_CTRL_BAS, + table | GSWIP_BM_RAM_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_BAS); + if (err) { + dev_err(priv->dev, "timeout while reading table: %u, index: %u\n", + table, index); + return 0; + } + + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(0), &result); + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(1), &val); + result |= val << 16; + + return result; +} + +static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct gswip_priv *priv = ds->priv; + const struct gswip_rmon_cnt_desc *rmon_cnt; + int i; + u64 high; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { + rmon_cnt = &gswip_rmon_cnt[i]; + + data[i] = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset); + if (rmon_cnt->size == 2) { + high = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset + 1); + data[i] |= high << 32; + } + } +} + +static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + if (sset != ETH_SS_STATS) + return 0; + + return ARRAY_SIZE(gswip_rmon_cnt); +} + +static int gswip_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_keee *e) +{ + if (e->tx_lpi_timer > 0x7f) + return -EINVAL; + + return 0; +} + +static void gswip_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_4p(dp->index), + GSWIP_MAC_CTRL_4_LPIEN); +} + +static int gswip_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + return regmap_update_bits(priv->gswip, GSWIP_MAC_CTRL_4p(dp->index), + GSWIP_MAC_CTRL_4_LPIEN | + GSWIP_MAC_CTRL_4_GWAIT_MASK | + GSWIP_MAC_CTRL_4_WAIT_MASK, + GSWIP_MAC_CTRL_4_LPIEN | + GSWIP_MAC_CTRL_4_GWAIT(timer) | + GSWIP_MAC_CTRL_4_WAIT(timer)); +} + +static bool gswip_support_eee(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + + if (GSWIP_VERSION_GE(priv, GSWIP_VERSION_2_2)) + return true; + + return false; +} + +static struct phylink_pcs *gswip_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + if (priv->hw_info->mac_select_pcs) + return priv->hw_info->mac_select_pcs(config, interface); + + return NULL; +} + +static const struct phylink_mac_ops gswip_phylink_mac_ops = { + .mac_config = gswip_phylink_mac_config, + .mac_link_down = gswip_phylink_mac_link_down, + .mac_link_up = gswip_phylink_mac_link_up, + .mac_disable_tx_lpi = gswip_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = gswip_phylink_mac_enable_tx_lpi, + .mac_select_pcs = gswip_phylink_mac_select_pcs, +}; + +static const struct dsa_switch_ops gswip_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_setup = gswip_port_setup, + .port_enable = gswip_port_enable, + .port_disable = gswip_port_disable, + .port_pre_bridge_flags = gswip_port_pre_bridge_flags, + .port_bridge_flags = gswip_port_bridge_flags, + .port_bridge_join = gswip_port_bridge_join, + .port_bridge_leave = gswip_port_bridge_leave, + .port_fast_age = gswip_port_fast_age, + .port_vlan_filtering = gswip_port_vlan_filtering, + .port_vlan_add = gswip_port_vlan_add, + .port_vlan_del = gswip_port_vlan_del, + .port_stp_state_set = gswip_port_stp_state_set, + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, + .port_change_mtu = gswip_port_change_mtu, + .port_max_mtu = gswip_port_max_mtu, + .phylink_get_caps = gswip_phylink_get_caps, + .get_strings = gswip_get_strings, + .get_ethtool_stats = gswip_get_ethtool_stats, + .get_sset_count = gswip_get_sset_count, + .set_mac_eee = gswip_set_mac_eee, + .support_eee = gswip_support_eee, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, +}; + +void gswip_disable_switch(struct gswip_priv *priv) +{ + regmap_clear_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); +} +EXPORT_SYMBOL_GPL(gswip_disable_switch); + +static int gswip_validate_cpu_port(struct dsa_switch *ds) +{ + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int cpu_port = -1; + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + if (cpu_port != -1) + return dev_err_probe(ds->dev, -EINVAL, + "only a single CPU port is supported\n"); + + cpu_port = cpu_dp->index; + } + + if (cpu_port == -1) + return dev_err_probe(ds->dev, -EINVAL, "no CPU port defined\n"); + + if (BIT(cpu_port) & ~priv->hw_info->allowed_cpu_ports) + return dev_err_probe(ds->dev, -EINVAL, + "unsupported CPU port defined\n"); + + return 0; +} + +int gswip_probe_common(struct gswip_priv *priv, u32 version) +{ + int err; + + mutex_init(&priv->pce_table_lock); + + priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = priv->dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->ops = &gswip_switch_ops; + priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops; + priv->ds->priv = priv; + + /* The hardware has the 'major/minor' version bytes in the wrong order + * preventing numerical comparisons. Construct a 16-bit unsigned integer + * having the REV field as most significant byte and the MOD field as + * least significant byte. This is effectively swapping the two bytes of + * the version variable, but other than using swab16 it doesn't affect + * the source variable. + */ + priv->version = GSWIP_VERSION_REV(version) << 8 | + GSWIP_VERSION_MOD(version); + + err = dsa_register_switch(priv->ds); + if (err) + return dev_err_probe(priv->dev, err, "dsa switch registration failed\n"); + + err = gswip_validate_cpu_port(priv->ds); + if (err) + goto disable_switch; + + dev_info(priv->dev, "probed GSWIP version %lx mod %lx\n", + GSWIP_VERSION_REV(version), GSWIP_VERSION_MOD(version)); + + return 0; + +disable_switch: + gswip_disable_switch(priv); + dsa_unregister_switch(priv->ds); + + return err; +} +EXPORT_SYMBOL_GPL(gswip_probe_common); + +MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); +MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>"); +MODULE_DESCRIPTION("Lantiq / Intel / MaxLinear GSWIP common functions"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq/lantiq_pce.h index e2be31f3672a..659f9a0638d9 100644 --- a/drivers/net/dsa/lantiq_pce.h +++ b/drivers/net/dsa/lantiq/lantiq_pce.h @@ -7,6 +7,8 @@ * Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de> */ +#include "lantiq_gswip.h" + enum { OUT_MAC0 = 0, OUT_MAC1, @@ -74,13 +76,6 @@ enum { FLAG_NO, /*13*/ }; -struct gswip_pce_microcode { - u16 val_3; - u16 val_2; - u16 val_1; - u16 val_0; -}; - #define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ { val, msk, ((ns) << 10 | (out) << 4 | (len) >> 1),\ ((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 } diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx.c b/drivers/net/dsa/lantiq/mxl-gsw1xx.c new file mode 100644 index 000000000000..0816c61a47f1 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx.c @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* DSA Driver for MaxLinear GSW1xx switch devices + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_mdio.h> +#include <linux/regmap.h> +#include <net/dsa.h> + +#include "lantiq_gswip.h" +#include "mxl-gsw1xx.h" +#include "mxl-gsw1xx_pce.h" + +struct gsw1xx_priv { + struct mdio_device *mdio_dev; + int smdio_badr; + struct regmap *sgmii; + struct regmap *gpio; + struct regmap *clk; + struct regmap *shell; + struct phylink_pcs pcs; + phy_interface_t tbi_interface; + struct gswip_priv gswip; +}; + +static int gsw1xx_config_smdio_badr(struct gsw1xx_priv *priv, + unsigned int reg) +{ + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr = priv->smdio_badr; + int res; + + if (smdio_badr == GSW1XX_SMDIO_BADR_UNKNOWN || + reg - smdio_badr >= GSW1XX_SMDIO_BADR || + smdio_badr > reg) { + /* Configure the Switch Base Address */ + smdio_badr = reg & ~GENMASK(3, 0); + res = __mdiobus_write(bus, sw_addr, GSW1XX_SMDIO_BADR, smdio_badr); + if (res < 0) { + dev_err(&priv->mdio_dev->dev, + "%s: Error %d, configuring switch base\n", + __func__, res); + return res; + } + priv->smdio_badr = smdio_badr; + } + + return smdio_badr; +} + +static int gsw1xx_regmap_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct gsw1xx_priv *priv = context; + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr; + int res; + + smdio_badr = gsw1xx_config_smdio_badr(priv, reg); + if (smdio_badr < 0) + return smdio_badr; + + res = __mdiobus_read(bus, sw_addr, reg - smdio_badr); + if (res < 0) { + dev_err(&priv->mdio_dev->dev, "%s: Error %d reading 0x%x\n", + __func__, res, reg); + return res; + } + + *val = res; + + return 0; +} + +static int gsw1xx_regmap_write(void *context, unsigned int reg, + unsigned int val) +{ + struct gsw1xx_priv *priv = context; + struct mii_bus *bus = priv->mdio_dev->bus; + int sw_addr = priv->mdio_dev->addr; + int smdio_badr; + int res; + + smdio_badr = gsw1xx_config_smdio_badr(priv, reg); + if (smdio_badr < 0) + return smdio_badr; + + res = __mdiobus_write(bus, sw_addr, reg - smdio_badr, val); + if (res < 0) + dev_err(&priv->mdio_dev->dev, + "%s: Error %d, writing 0x%x:0x%x\n", __func__, res, reg, + val); + + return res; +} + +static const struct regmap_bus gsw1xx_regmap_bus = { + .reg_write = gsw1xx_regmap_write, + .reg_read = gsw1xx_regmap_read, +}; + +static void gsw1xx_mdio_regmap_lock(void *mdio_lock) +{ + mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED); +} + +static void gsw1xx_mdio_regmap_unlock(void *mdio_lock) +{ + mutex_unlock(mdio_lock); +} + +static unsigned int gsw1xx_pcs_inband_caps(struct phylink_pcs *pcs, + phy_interface_t interface) +{ + return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE; +} + +static struct gsw1xx_priv *pcs_to_gsw1xx(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct gsw1xx_priv, pcs); +} + +static int gsw1xx_pcs_enable(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + /* Deassert SGMII shell reset */ + return regmap_clear_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); +} + +static void gsw1xx_pcs_disable(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + /* Assert SGMII shell reset */ + regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + + priv->tbi_interface = PHY_INTERFACE_MODE_NA; +} + +static void gsw1xx_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, + struct phylink_link_state *state) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + int ret; + u32 val; + + ret = regmap_read(priv->sgmii, GSW1XX_SGMII_TBI_TBISTAT, &val); + if (ret < 0) + return; + + state->link = !!(val & GSW1XX_SGMII_TBI_TBISTAT_LINK); + state->an_complete = !!(val & GSW1XX_SGMII_TBI_TBISTAT_AN_COMPLETE); + + ret = regmap_read(priv->sgmii, GSW1XX_SGMII_TBI_LPSTAT, &val); + if (ret < 0) + return; + + state->duplex = (val & GSW1XX_SGMII_TBI_LPSTAT_DUPLEX) ? + DUPLEX_FULL : DUPLEX_HALF; + if (val & GSW1XX_SGMII_TBI_LPSTAT_PAUSE_RX) + state->pause |= MLO_PAUSE_RX; + + if (val & GSW1XX_SGMII_TBI_LPSTAT_PAUSE_TX) + state->pause |= MLO_PAUSE_TX; + + switch (FIELD_GET(GSW1XX_SGMII_TBI_LPSTAT_SPEED, val)) { + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_10: + state->speed = SPEED_10; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_100: + state->speed = SPEED_100; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000: + state->speed = SPEED_1000; + break; + case GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII: + if (state->interface == PHY_INTERFACE_MODE_1000BASEX) + state->speed = SPEED_1000; + else if (state->interface == PHY_INTERFACE_MODE_2500BASEX) + state->speed = SPEED_2500; + else + state->speed = SPEED_UNKNOWN; + break; + } +} + +static int gsw1xx_pcs_phy_xaui_write(struct gsw1xx_priv *priv, u16 addr, + u16 data) +{ + int ret, val; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_D, data); + if (ret < 0) + return ret; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_A, addr); + if (ret < 0) + return ret; + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_C, + GSW1XX_SGMII_PHY_WRITE | + GSW1XX_SGMII_PHY_RESET_N); + if (ret < 0) + return ret; + + return regmap_read_poll_timeout(priv->sgmii, GSW1XX_SGMII_PHY_C, + val, val & GSW1XX_SGMII_PHY_STATUS, + 1000, 100000); +} + +static int gsw1xx_pcs_reset(struct gsw1xx_priv *priv) +{ + int ret; + u16 val; + + /* Assert and deassert SGMII shell reset */ + ret = regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + ret = regmap_clear_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + /* Hardware Bringup FSM Enable */ + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_HWBU_CTRL, + GSW1XX_SGMII_PHY_HWBU_CTRL_EN_HWBU_FSM | + GSW1XX_SGMII_PHY_HWBU_CTRL_HW_FSM_EN); + if (ret < 0) + return ret; + + /* Configure SGMII PHY Receiver */ + val = FIELD_PREP(GSW1XX_SGMII_PHY_RX0_CFG2_EQ, + GSW1XX_SGMII_PHY_RX0_CFG2_EQ_DEF) | + GSW1XX_SGMII_PHY_RX0_CFG2_LOS_EN | + GSW1XX_SGMII_PHY_RX0_CFG2_TERM_EN | + FIELD_PREP(GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT, + GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT_DEF); + + /* TODO: Take care of inverted RX pair once generic property is + * available + */ + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_RX0_CFG2, val); + if (ret < 0) + return ret; + + val = FIELD_PREP(GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL, + GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL_DEF); + + /* TODO: Take care of inverted TX pair once generic property is + * available + */ + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_PHY_TX0_CFG3, val); + if (ret < 0) + return ret; + + /* Reset and Release TBI */ + val = GSW1XX_SGMII_TBI_TBICTL_INITTBI | GSW1XX_SGMII_TBI_TBICTL_ENTBI | + GSW1XX_SGMII_TBI_TBICTL_CRSTRR | GSW1XX_SGMII_TBI_TBICTL_CRSOFF; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TBICTL, val); + if (ret < 0) + return ret; + val &= ~GSW1XX_SGMII_TBI_TBICTL_INITTBI; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TBICTL, val); + if (ret < 0) + return ret; + + /* Release Tx Data Buffers */ + ret = regmap_set_bits(priv->sgmii, GSW1XX_SGMII_PCS_TXB_CTL, + GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB); + if (ret < 0) + return ret; + ret = regmap_clear_bits(priv->sgmii, GSW1XX_SGMII_PCS_TXB_CTL, + GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB); + if (ret < 0) + return ret; + + /* Release Rx Data Buffers */ + ret = regmap_set_bits(priv->sgmii, GSW1XX_SGMII_PCS_RXB_CTL, + GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB); + if (ret < 0) + return ret; + return regmap_clear_bits(priv->sgmii, GSW1XX_SGMII_PCS_RXB_CTL, + GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB); +} + +static int gsw1xx_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + u16 txaneg, anegctl, nco_ctrl; + bool reconf = false; + int ret = 0; + + /* do not unnecessarily disrupt link and skip resetting the hardware in + * case the PCS has previously been successfully configured for this + * interface mode + */ + if (priv->tbi_interface == interface) + reconf = true; + + /* mark PCS configuration as incomplete */ + priv->tbi_interface = PHY_INTERFACE_MODE_NA; + + if (!reconf) + ret = gsw1xx_pcs_reset(priv); + + if (ret) + return ret; + + /* override bootstrap pin settings + * OVRANEG sets ANEG Mode, Enable ANEG and restart ANEG to be + * taken from bits ANMODE, ANEGEN, RANEG of the ANEGCTL register. + * OVERABL sets ability bits in tx_config_reg to be taken from + * the TXANEGH and TXANEGL registers. + */ + anegctl = GSW1XX_SGMII_TBI_ANEGCTL_OVRANEG | + GSW1XX_SGMII_TBI_ANEGCTL_OVRABL; + + switch (phylink_get_link_timer_ns(interface)) { + case 10000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_10US); + break; + case 1600000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_1_6MS); + break; + case 5000000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_5MS); + break; + case 10000000: + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_LT, + GSW1XX_SGMII_TBI_ANEGCTL_LT_10MS); + break; + default: + return -EINVAL; + } + + if (neg_mode & PHYLINK_PCS_NEG_INBAND) + anegctl |= GSW1XX_SGMII_TBI_ANEGCTL_ANEGEN; + + txaneg = phylink_mii_c22_pcs_encode_advertisement(interface, advertising); + + if (interface == PHY_INTERFACE_MODE_SGMII) { + /* lacking a defined reverse-SGMII interface mode this + * driver only supports SGMII (MAC side) for now + */ + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_ANMODE, + GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_MAC); + txaneg |= ADVERTISE_LPACK; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX || + interface == PHY_INTERFACE_MODE_2500BASEX) { + anegctl |= FIELD_PREP(GSW1XX_SGMII_TBI_ANEGCTL_ANMODE, + GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_1000BASEX); + } else { + dev_err(priv->gswip.dev, "%s: wrong interface mode %s\n", + __func__, phy_modes(interface)); + return -EINVAL; + } + + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TXANEGH, + FIELD_GET(GENMASK(15, 8), txaneg)); + if (ret < 0) + return ret; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_TXANEGL, + FIELD_GET(GENMASK(7, 0), txaneg)); + if (ret < 0) + return ret; + ret = regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_ANEGCTL, anegctl); + if (ret < 0) + return ret; + + if (!reconf) { + /* setup SerDes clock speed */ + if (interface == PHY_INTERFACE_MODE_2500BASEX) + nco_ctrl = GSW1XX_SGMII_2G5 | GSW1XX_SGMII_2G5_NCO2; + else + nco_ctrl = GSW1XX_SGMII_1G | GSW1XX_SGMII_1G_NCO1; + + ret = regmap_update_bits(priv->clk, GSW1XX_CLK_NCO_CTRL, + GSW1XX_SGMII_HSP_MASK | + GSW1XX_SGMII_SEL, + nco_ctrl); + if (ret) + return ret; + + ret = gsw1xx_pcs_phy_xaui_write(priv, 0x30, 0x80); + if (ret) + return ret; + } + + /* PCS configuration has now been completed, store mode to prevent + * disrupting the link in case of future calls of this function for the + * same interface mode. + */ + priv->tbi_interface = interface; + + return 0; +} + +static void gsw1xx_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + + regmap_set_bits(priv->sgmii, GSW1XX_SGMII_TBI_ANEGCTL, + GSW1XX_SGMII_TBI_ANEGCTL_RANEG); +} + +static void gsw1xx_pcs_link_up(struct phylink_pcs *pcs, + unsigned int neg_mode, + phy_interface_t interface, int speed, + int duplex) +{ + struct gsw1xx_priv *priv = pcs_to_gsw1xx(pcs); + u16 lpstat; + + /* When in-band AN is enabled hardware will set lpstat */ + if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) + return; + + /* Force speed and duplex settings */ + if (interface == PHY_INTERFACE_MODE_SGMII) { + if (speed == SPEED_10) + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_10); + else if (speed == SPEED_100) + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_100); + else + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000); + } else { + lpstat = FIELD_PREP(GSW1XX_SGMII_TBI_LPSTAT_SPEED, + GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII); + } + + if (duplex == DUPLEX_FULL) + lpstat |= GSW1XX_SGMII_TBI_LPSTAT_DUPLEX; + + regmap_write(priv->sgmii, GSW1XX_SGMII_TBI_LPSTAT, lpstat); +} + +static const struct phylink_pcs_ops gsw1xx_pcs_ops = { + .pcs_inband_caps = gsw1xx_pcs_inband_caps, + .pcs_enable = gsw1xx_pcs_enable, + .pcs_disable = gsw1xx_pcs_disable, + .pcs_get_state = gsw1xx_pcs_get_state, + .pcs_config = gsw1xx_pcs_config, + .pcs_an_restart = gsw1xx_pcs_an_restart, + .pcs_link_up = gsw1xx_pcs_link_up, +}; + +static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct gswip_priv *priv = ds->priv; + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + + switch (port) { + case 0: + case 1: + case 2: + case 3: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + break; + case 4: /* port 4: SGMII */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + if (priv->hw_info->supports_2500m) { + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + config->mac_capabilities |= MAC_2500FD; + } + return; /* no support for EEE on SGMII port */ + case 5: /* port 5: RGMII or RMII */ + __set_bit(PHY_INTERFACE_MODE_RMII, + config->supported_interfaces); + phy_interface_set_rgmii(config->supported_interfaces); + break; + } + + config->lpi_capabilities = MAC_100FD | MAC_1000FD; + config->lpi_timer_default = 20; + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); +} + +static struct phylink_pcs *gsw1xx_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *gswip_priv = dp->ds->priv; + struct gsw1xx_priv *gsw1xx_priv = container_of(gswip_priv, + struct gsw1xx_priv, + gswip); + + switch (dp->index) { + case GSW1XX_SGMII_PORT: + return &gsw1xx_priv->pcs; + default: + return NULL; + } +} + +static struct regmap *gsw1xx_regmap_init(struct gsw1xx_priv *priv, + const char *name, + unsigned int reg_base, + unsigned int max_register) +{ + const struct regmap_config config = { + .name = name, + .reg_bits = 16, + .val_bits = 16, + .reg_base = reg_base, + .max_register = max_register, + .lock = gsw1xx_mdio_regmap_lock, + .unlock = gsw1xx_mdio_regmap_unlock, + .lock_arg = &priv->mdio_dev->bus->mdio_lock, + }; + + return devm_regmap_init(&priv->mdio_dev->dev, &gsw1xx_regmap_bus, + priv, &config); +} + +static int gsw1xx_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct gsw1xx_priv *priv; + u32 version; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mdio_dev = mdiodev; + priv->smdio_badr = GSW1XX_SMDIO_BADR_UNKNOWN; + + priv->gswip.dev = dev; + priv->gswip.hw_info = of_device_get_match_data(dev); + if (!priv->gswip.hw_info) + return -EINVAL; + + priv->gswip.gswip = gsw1xx_regmap_init(priv, "switch", + GSW1XX_SWITCH_BASE, 0xfff); + if (IS_ERR(priv->gswip.gswip)) + return PTR_ERR(priv->gswip.gswip); + + priv->gswip.mdio = gsw1xx_regmap_init(priv, "mdio", GSW1XX_MMDIO_BASE, + 0xff); + if (IS_ERR(priv->gswip.mdio)) + return PTR_ERR(priv->gswip.mdio); + + priv->gswip.mii = gsw1xx_regmap_init(priv, "mii", GSW1XX_RGMII_BASE, + 0xff); + if (IS_ERR(priv->gswip.mii)) + return PTR_ERR(priv->gswip.mii); + + priv->sgmii = gsw1xx_regmap_init(priv, "sgmii", GSW1XX_SGMII_BASE, + 0xfff); + if (IS_ERR(priv->sgmii)) + return PTR_ERR(priv->sgmii); + + priv->gpio = gsw1xx_regmap_init(priv, "gpio", GSW1XX_GPIO_BASE, 0xff); + if (IS_ERR(priv->gpio)) + return PTR_ERR(priv->gpio); + + priv->clk = gsw1xx_regmap_init(priv, "clk", GSW1XX_CLK_BASE, 0xff); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->shell = gsw1xx_regmap_init(priv, "shell", GSW1XX_SHELL_BASE, + 0xff); + if (IS_ERR(priv->shell)) + return PTR_ERR(priv->shell); + + priv->pcs.ops = &gsw1xx_pcs_ops; + priv->pcs.poll = true; + __set_bit(PHY_INTERFACE_MODE_SGMII, + priv->pcs.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + priv->pcs.supported_interfaces); + if (priv->gswip.hw_info->supports_2500m) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + priv->pcs.supported_interfaces); + priv->tbi_interface = PHY_INTERFACE_MODE_NA; + + /* assert SGMII reset to power down SGMII unit */ + ret = regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ, + GSW1XX_RST_REQ_SGMII_SHELL); + if (ret < 0) + return ret; + + /* configure GPIO pin-mux for MMDIO in case of external PHY connected to + * SGMII or RGMII as slave interface + */ + regmap_set_bits(priv->gpio, GPIO_ALTSEL0, 3); + regmap_set_bits(priv->gpio, GPIO_ALTSEL1, 3); + + ret = regmap_read(priv->gswip.gswip, GSWIP_VERSION, &version); + if (ret) + return ret; + + ret = gswip_probe_common(&priv->gswip, version); + if (ret) + return ret; + + dev_set_drvdata(dev, &priv->gswip); + + return 0; +} + +static void gsw1xx_remove(struct mdio_device *mdiodev) +{ + struct gswip_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + gswip_disable_switch(priv); + + dsa_unregister_switch(priv->ds); +} + +static void gsw1xx_shutdown(struct mdio_device *mdiodev) +{ + struct gswip_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dev_set_drvdata(&mdiodev->dev, NULL); + + gswip_disable_switch(priv); +} + +static const struct gswip_hw_info gsw12x_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = &gsw1xx_phylink_get_caps, + .supports_2500m = true, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +static const struct gswip_hw_info gsw140_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = &gsw1xx_phylink_get_caps, + .supports_2500m = true, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +static const struct gswip_hw_info gsw141_data = { + .max_ports = GSW1XX_PORTS, + .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT), + .mii_ports = BIT(GSW1XX_MII_PORT), + .mii_port_reg_offset = -GSW1XX_MII_PORT, + .mac_select_pcs = gsw1xx_phylink_mac_select_pcs, + .phylink_get_caps = gsw1xx_phylink_get_caps, + .pce_microcode = &gsw1xx_pce_microcode, + .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode), + .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX, +}; + +/* + * GSW125 is the industrial temperature version of GSW120. + * GSW145 is the industrial temperature version of GSW140. + */ +static const struct of_device_id gsw1xx_of_match[] = { + { .compatible = "maxlinear,gsw120", .data = &gsw12x_data }, + { .compatible = "maxlinear,gsw125", .data = &gsw12x_data }, + { .compatible = "maxlinear,gsw140", .data = &gsw140_data }, + { .compatible = "maxlinear,gsw141", .data = &gsw141_data }, + { .compatible = "maxlinear,gsw145", .data = &gsw140_data }, + { /* sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, gsw1xx_of_match); + +static struct mdio_driver gsw1xx_driver = { + .probe = gsw1xx_probe, + .remove = gsw1xx_remove, + .shutdown = gsw1xx_shutdown, + .mdiodrv.driver = { + .name = "mxl-gsw1xx", + .of_match_table = gsw1xx_of_match, + }, +}; + +mdio_module_driver(gsw1xx_driver); + +MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>"); +MODULE_DESCRIPTION("Driver for MaxLinear GSW1xx ethernet switch"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx.h b/drivers/net/dsa/lantiq/mxl-gsw1xx.h new file mode 100644 index 000000000000..38e03c048a26 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Register definitions for MaxLinear GSW1xx series switches + * + * Copyright (C) 2025 Daniel Golle <daniel@makrotopia.org> + * Copyright (C) 2023 - 2024 MaxLinear Inc. + */ +#ifndef __MXL_GSW1XX_H +#define __MXL_GSW1XX_H + +#include <linux/bitfield.h> + +#define GSW1XX_PORTS 6 +/* Port used for RGMII or optional RMII */ +#define GSW1XX_MII_PORT 5 +/* Port used for SGMII */ +#define GSW1XX_SGMII_PORT 4 + +#define GSW1XX_SYS_CLK_FREQ 340000000 + +/* SMDIO switch register base address */ +#define GSW1XX_SMDIO_BADR 0x1f +#define GSW1XX_SMDIO_BADR_UNKNOWN -1 + +/* GSW1XX SGMII PCS */ +#define GSW1XX_SGMII_BASE 0xd000 +#define GSW1XX_SGMII_PHY_HWBU_CTRL 0x009 +#define GSW1XX_SGMII_PHY_HWBU_CTRL_EN_HWBU_FSM BIT(0) +#define GSW1XX_SGMII_PHY_HWBU_CTRL_HW_FSM_EN BIT(3) +#define GSW1XX_SGMII_TBI_TXANEGH 0x300 +#define GSW1XX_SGMII_TBI_TXANEGL 0x301 +#define GSW1XX_SGMII_TBI_ANEGCTL 0x304 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT GENMASK(1, 0) +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_10US 0 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_1_6MS 1 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_5MS 2 +#define GSW1XX_SGMII_TBI_ANEGCTL_LT_10MS 3 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANEGEN BIT(2) +#define GSW1XX_SGMII_TBI_ANEGCTL_RANEG BIT(3) +#define GSW1XX_SGMII_TBI_ANEGCTL_OVRABL BIT(4) +#define GSW1XX_SGMII_TBI_ANEGCTL_OVRANEG BIT(5) +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE GENMASK(7, 6) +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_1000BASEX 1 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_PHY 2 +#define GSW1XX_SGMII_TBI_ANEGCTL_ANMODE_SGMII_MAC 3 +#define GSW1XX_SGMII_TBI_ANEGCTL_BCOMP BIT(15) + +#define GSW1XX_SGMII_TBI_TBICTL 0x305 +#define GSW1XX_SGMII_TBI_TBICTL_INITTBI BIT(0) +#define GSW1XX_SGMII_TBI_TBICTL_ENTBI BIT(1) +#define GSW1XX_SGMII_TBI_TBICTL_CRSTRR BIT(4) +#define GSW1XX_SGMII_TBI_TBICTL_CRSOFF BIT(5) +#define GSW1XX_SGMII_TBI_TBISTAT 0x309 +#define GSW1XX_SGMII_TBI_TBISTAT_LINK BIT(0) +#define GSW1XX_SGMII_TBI_TBISTAT_AN_COMPLETE BIT(1) +#define GSW1XX_SGMII_TBI_LPSTAT 0x30a +#define GSW1XX_SGMII_TBI_LPSTAT_DUPLEX BIT(0) +#define GSW1XX_SGMII_TBI_LPSTAT_PAUSE_RX BIT(1) +#define GSW1XX_SGMII_TBI_LPSTAT_PAUSE_TX BIT(2) +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED GENMASK(6, 5) +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_10 0 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_100 1 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_1000 2 +#define GSW1XX_SGMII_TBI_LPSTAT_SPEED_NOSGMII 3 +#define GSW1XX_SGMII_PHY_D 0x100 +#define GSW1XX_SGMII_PHY_A 0x101 +#define GSW1XX_SGMII_PHY_C 0x102 +#define GSW1XX_SGMII_PHY_STATUS BIT(0) +#define GSW1XX_SGMII_PHY_READ BIT(4) +#define GSW1XX_SGMII_PHY_WRITE BIT(8) +#define GSW1XX_SGMII_PHY_RESET_N BIT(12) +#define GSW1XX_SGMII_PCS_RXB_CTL 0x401 +#define GSW1XX_SGMII_PCS_RXB_CTL_INIT_RX_RXB BIT(1) +#define GSW1XX_SGMII_PCS_TXB_CTL 0x404 +#define GSW1XX_SGMII_PCS_TXB_CTL_INIT_TX_TXB BIT(1) + +#define GSW1XX_SGMII_PHY_RX0_CFG2 0x004 +#define GSW1XX_SGMII_PHY_RX0_CFG2_EQ GENMASK(2, 0) +#define GSW1XX_SGMII_PHY_RX0_CFG2_EQ_DEF 2 +#define GSW1XX_SGMII_PHY_RX0_CFG2_INVERT BIT(3) +#define GSW1XX_SGMII_PHY_RX0_CFG2_LOS_EN BIT(4) +#define GSW1XX_SGMII_PHY_RX0_CFG2_TERM_EN BIT(5) +#define GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT GENMASK(12, 6) +#define GSW1XX_SGMII_PHY_RX0_CFG2_FILT_CNT_DEF 20 + +#define GSW1XX_SGMII_PHY_TX0_CFG3 0x007 +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_EN BIT(12) +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL GENMASK(11, 9) +#define GSW1XX_SGMII_PHY_TX0_CFG3_VBOOST_LEVEL_DEF 4 +#define GSW1XX_SGMII_PHY_TX0_CFG3_INVERT BIT(8) + +/* GSW1XX PDI Registers */ +#define GSW1XX_SWITCH_BASE 0xe000 + +/* GSW1XX MII Registers */ +#define GSW1XX_RGMII_BASE 0xf100 + +/* GSW1XX GPIO Registers */ +#define GSW1XX_GPIO_BASE 0xf300 +#define GPIO_ALTSEL0 0x83 +#define GPIO_ALTSEL0_EXTPHY_MUX_VAL 0x03c3 +#define GPIO_ALTSEL1 0x84 +#define GPIO_ALTSEL1_EXTPHY_MUX_VAL 0x003f + +/* MDIO bus controller */ +#define GSW1XX_MMDIO_BASE 0xf400 + +/* generic IC registers */ +#define GSW1XX_SHELL_BASE 0xfa00 +#define GSW1XX_SHELL_RST_REQ 0x01 +#define GSW1XX_RST_REQ_SGMII_SHELL BIT(5) +/* RGMII PAD Slew Control Register */ +#define GSW1XX_SHELL_RGMII_SLEW_CFG 0x78 +#define RGMII_SLEW_CFG_RX_2_5_V BIT(4) +#define RGMII_SLEW_CFG_TX_2_5_V BIT(5) + +/* SGMII clock related settings */ +#define GSW1XX_CLK_BASE 0xf900 +#define GSW1XX_CLK_NCO_CTRL 0x68 +#define GSW1XX_SGMII_HSP_MASK GENMASK(3, 2) +#define GSW1XX_SGMII_SEL BIT(1) +#define GSW1XX_SGMII_1G 0x0 +#define GSW1XX_SGMII_2G5 0xc +#define GSW1XX_SGMII_1G_NCO1 0x0 +#define GSW1XX_SGMII_2G5_NCO2 0x2 + +#endif /* __MXL_GSW1XX_H */ diff --git a/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h b/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h new file mode 100644 index 000000000000..eefcd411a340 --- /dev/null +++ b/drivers/net/dsa/lantiq/mxl-gsw1xx_pce.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PCE microcode code update for driver for MaxLinear GSW1xx switch chips + * + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright (C) 2012 John Crispin <john@phrozen.org> + * Copyright (C) 2010 Lantiq Deutschland + */ + +#include "lantiq_gswip.h" + +#define INSTR 0 +#define IPV6 1 +#define LENACCU 2 + +/* GSWIP_2.X */ +enum { + OUT_MAC0 = 0, + OUT_MAC1, + OUT_MAC2, + OUT_MAC3, + OUT_MAC4, + OUT_MAC5, + OUT_ETHTYP, + OUT_VTAG0, + OUT_VTAG1, + OUT_ITAG0, + OUT_ITAG1, /* 10 */ + OUT_ITAG2, + OUT_ITAG3, + OUT_IP0, + OUT_IP1, + OUT_IP2, + OUT_IP3, + OUT_SIP0, + OUT_SIP1, + OUT_SIP2, + OUT_SIP3, /* 20 */ + OUT_SIP4, + OUT_SIP5, + OUT_SIP6, + OUT_SIP7, + OUT_DIP0, + OUT_DIP1, + OUT_DIP2, + OUT_DIP3, + OUT_DIP4, + OUT_DIP5, /* 30 */ + OUT_DIP6, + OUT_DIP7, + OUT_SESID, + OUT_PROT, + OUT_APP0, + OUT_APP1, + OUT_IGMP0, + OUT_IGMP1, + OUT_STAG0 = 61, + OUT_STAG1 = 62, + OUT_NONE = 63, +}; + +/* parser's microcode flag type */ +enum { + FLAG_ITAG = 0, + FLAG_VLAN, + FLAG_SNAP, + FLAG_PPPOE, + FLAG_IPV6, + FLAG_IPV6FL, + FLAG_IPV4, + FLAG_IGMP, + FLAG_TU, + FLAG_HOP, + FLAG_NN1, /* 10 */ + FLAG_NN2, + FLAG_END, + FLAG_NO, /* 13 */ + FLAG_SVLAN, /* 14 */ +}; + +#define PCE_MC_M(val, msk, ns, out, len, type, flags, ipv4_len) \ + { (val), (msk), ((ns) << 10 | (out) << 4 | (len) >> 1),\ + ((len) & 1) << 15 | (type) << 13 | (flags) << 9 | (ipv4_len) << 8 } + +/* V22_2X (IPv6 issue fixed) */ +static const struct gswip_pce_microcode gsw1xx_pce_microcode[] = { + /* value mask ns fields L type flags ipv4_len */ + PCE_MC_M(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), + PCE_MC_M(0x8100, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x88A8, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x9100, 0xFFFF, 4, OUT_STAG0, 2, INSTR, FLAG_SVLAN, 0), + PCE_MC_M(0x8100, 0xFFFF, 5, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x88A8, 0xFFFF, 6, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x9100, 0xFFFF, 4, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), + PCE_MC_M(0x8864, 0xFFFF, 20, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0800, 0xFFFF, 24, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x86DD, 0xFFFF, 25, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x8863, 0xFFFF, 19, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xF800, 13, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0600, 0x0600, 44, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 15, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0xAAAA, 0xFFFF, 17, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0300, 0xFF00, 45, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_DIP7, 3, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 21, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), + PCE_MC_M(0x0021, 0xFFFF, 24, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0057, 0xFFFF, 25, OUT_NONE, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x4000, 0xF000, 27, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), + PCE_MC_M(0x6000, 0xF000, 30, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 28, OUT_IP3, 2, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 29, OUT_SIP0, 4, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, LENACCU, FLAG_NO, 0), + PCE_MC_M(0x1100, 0xFF00, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0600, 0xFF00, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_HOP, 0), + PCE_MC_M(0x2B00, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_NN1, 0), + PCE_MC_M(0x3C00, 0xFF00, 36, OUT_IP3, 17, INSTR, FLAG_NN2, 0), + PCE_MC_M(0x0000, 0x0000, 43, OUT_PROT, 1, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x00F0, 38, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_HOP, 0), + PCE_MC_M(0x2B00, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_NN1, 0), + PCE_MC_M(0x3C00, 0xFF00, 36, OUT_NONE, 0, IPV6, FLAG_NN2, 0), + PCE_MC_M(0x0000, 0x00FC, 44, OUT_PROT, 0, IPV6, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_NONE, 0, IPV6, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 44, OUT_SIP0, 16, INSTR, FLAG_NO, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), + PCE_MC_M(0x0000, 0x0000, 45, OUT_NONE, 0, INSTR, FLAG_END, 0), +}; diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c deleted file mode 100644 index 6eb3140d4044..000000000000 --- a/drivers/net/dsa/lantiq_gswip.c +++ /dev/null @@ -1,2270 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs - * - * Copyright (C) 2010 Lantiq Deutschland - * Copyright (C) 2012 John Crispin <john@phrozen.org> - * Copyright (C) 2017 - 2019 Hauke Mehrtens <hauke@hauke-m.de> - * - * The VLAN and bridge model the GSWIP hardware uses does not directly - * matches the model DSA uses. - * - * The hardware has 64 possible table entries for bridges with one VLAN - * ID, one flow id and a list of ports for each bridge. All entries which - * match the same flow ID are combined in the mac learning table, they - * act as one global bridge. - * The hardware does not support VLAN filter on the port, but on the - * bridge, this driver converts the DSA model to the hardware. - * - * The CPU gets all the exception frames which do not match any forwarding - * rule and the CPU port is also added to all bridges. This makes it possible - * to handle all the special cases easily in software. - * At the initialization the driver allocates one bridge table entry for - * each switch port which is used when the port is used without an - * explicit bridge. This prevents the frames from being forwarded - * between all LAN ports by default. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/firmware.h> -#include <linux/if_bridge.h> -#include <linux/if_vlan.h> -#include <linux/iopoll.h> -#include <linux/mfd/syscon.h> -#include <linux/module.h> -#include <linux/of_mdio.h> -#include <linux/of_net.h> -#include <linux/of_platform.h> -#include <linux/phy.h> -#include <linux/phylink.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <net/dsa.h> -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - -#include "lantiq_pce.h" - -/* GSWIP MDIO Registers */ -#define GSWIP_MDIO_GLOB 0x00 -#define GSWIP_MDIO_GLOB_ENABLE BIT(15) -#define GSWIP_MDIO_CTRL 0x08 -#define GSWIP_MDIO_CTRL_BUSY BIT(12) -#define GSWIP_MDIO_CTRL_RD BIT(11) -#define GSWIP_MDIO_CTRL_WR BIT(10) -#define GSWIP_MDIO_CTRL_PHYAD_MASK 0x1f -#define GSWIP_MDIO_CTRL_PHYAD_SHIFT 5 -#define GSWIP_MDIO_CTRL_REGAD_MASK 0x1f -#define GSWIP_MDIO_READ 0x09 -#define GSWIP_MDIO_WRITE 0x0A -#define GSWIP_MDIO_MDC_CFG0 0x0B -#define GSWIP_MDIO_MDC_CFG1 0x0C -#define GSWIP_MDIO_PHYp(p) (0x15 - (p)) -#define GSWIP_MDIO_PHY_LINK_MASK 0x6000 -#define GSWIP_MDIO_PHY_LINK_AUTO 0x0000 -#define GSWIP_MDIO_PHY_LINK_DOWN 0x4000 -#define GSWIP_MDIO_PHY_LINK_UP 0x2000 -#define GSWIP_MDIO_PHY_SPEED_MASK 0x1800 -#define GSWIP_MDIO_PHY_SPEED_AUTO 0x1800 -#define GSWIP_MDIO_PHY_SPEED_M10 0x0000 -#define GSWIP_MDIO_PHY_SPEED_M100 0x0800 -#define GSWIP_MDIO_PHY_SPEED_G1 0x1000 -#define GSWIP_MDIO_PHY_FDUP_MASK 0x0600 -#define GSWIP_MDIO_PHY_FDUP_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FDUP_EN 0x0200 -#define GSWIP_MDIO_PHY_FDUP_DIS 0x0600 -#define GSWIP_MDIO_PHY_FCONTX_MASK 0x0180 -#define GSWIP_MDIO_PHY_FCONTX_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FCONTX_EN 0x0100 -#define GSWIP_MDIO_PHY_FCONTX_DIS 0x0180 -#define GSWIP_MDIO_PHY_FCONRX_MASK 0x0060 -#define GSWIP_MDIO_PHY_FCONRX_AUTO 0x0000 -#define GSWIP_MDIO_PHY_FCONRX_EN 0x0020 -#define GSWIP_MDIO_PHY_FCONRX_DIS 0x0060 -#define GSWIP_MDIO_PHY_ADDR_MASK 0x001f -#define GSWIP_MDIO_PHY_MASK (GSWIP_MDIO_PHY_ADDR_MASK | \ - GSWIP_MDIO_PHY_FCONRX_MASK | \ - GSWIP_MDIO_PHY_FCONTX_MASK | \ - GSWIP_MDIO_PHY_LINK_MASK | \ - GSWIP_MDIO_PHY_SPEED_MASK | \ - GSWIP_MDIO_PHY_FDUP_MASK) - -/* GSWIP MII Registers */ -#define GSWIP_MII_CFGp(p) (0x2 * (p)) -#define GSWIP_MII_CFG_RESET BIT(15) -#define GSWIP_MII_CFG_EN BIT(14) -#define GSWIP_MII_CFG_ISOLATE BIT(13) -#define GSWIP_MII_CFG_LDCLKDIS BIT(12) -#define GSWIP_MII_CFG_RGMII_IBS BIT(8) -#define GSWIP_MII_CFG_RMII_CLK BIT(7) -#define GSWIP_MII_CFG_MODE_MIIP 0x0 -#define GSWIP_MII_CFG_MODE_MIIM 0x1 -#define GSWIP_MII_CFG_MODE_RMIIP 0x2 -#define GSWIP_MII_CFG_MODE_RMIIM 0x3 -#define GSWIP_MII_CFG_MODE_RGMII 0x4 -#define GSWIP_MII_CFG_MODE_GMII 0x9 -#define GSWIP_MII_CFG_MODE_MASK 0xf -#define GSWIP_MII_CFG_RATE_M2P5 0x00 -#define GSWIP_MII_CFG_RATE_M25 0x10 -#define GSWIP_MII_CFG_RATE_M125 0x20 -#define GSWIP_MII_CFG_RATE_M50 0x30 -#define GSWIP_MII_CFG_RATE_AUTO 0x40 -#define GSWIP_MII_CFG_RATE_MASK 0x70 -#define GSWIP_MII_PCDU0 0x01 -#define GSWIP_MII_PCDU1 0x03 -#define GSWIP_MII_PCDU5 0x05 -#define GSWIP_MII_PCDU_TXDLY_MASK GENMASK(2, 0) -#define GSWIP_MII_PCDU_RXDLY_MASK GENMASK(9, 7) - -/* GSWIP Core Registers */ -#define GSWIP_SWRES 0x000 -#define GSWIP_SWRES_R1 BIT(1) /* GSWIP Software reset */ -#define GSWIP_SWRES_R0 BIT(0) /* GSWIP Hardware reset */ -#define GSWIP_VERSION 0x013 -#define GSWIP_VERSION_REV_SHIFT 0 -#define GSWIP_VERSION_REV_MASK GENMASK(7, 0) -#define GSWIP_VERSION_MOD_SHIFT 8 -#define GSWIP_VERSION_MOD_MASK GENMASK(15, 8) -#define GSWIP_VERSION_2_0 0x100 -#define GSWIP_VERSION_2_1 0x021 -#define GSWIP_VERSION_2_2 0x122 -#define GSWIP_VERSION_2_2_ETC 0x022 - -#define GSWIP_BM_RAM_VAL(x) (0x043 - (x)) -#define GSWIP_BM_RAM_ADDR 0x044 -#define GSWIP_BM_RAM_CTRL 0x045 -#define GSWIP_BM_RAM_CTRL_BAS BIT(15) -#define GSWIP_BM_RAM_CTRL_OPMOD BIT(5) -#define GSWIP_BM_RAM_CTRL_ADDR_MASK GENMASK(4, 0) -#define GSWIP_BM_QUEUE_GCTRL 0x04A -#define GSWIP_BM_QUEUE_GCTRL_GL_MOD BIT(10) -/* buffer management Port Configuration Register */ -#define GSWIP_BM_PCFGp(p) (0x080 + ((p) * 2)) -#define GSWIP_BM_PCFG_CNTEN BIT(0) /* RMON Counter Enable */ -#define GSWIP_BM_PCFG_IGCNT BIT(1) /* Ingres Special Tag RMON count */ -/* buffer management Port Control Register */ -#define GSWIP_BM_RMON_CTRLp(p) (0x81 + ((p) * 2)) -#define GSWIP_BM_CTRL_RMON_RAM1_RES BIT(0) /* Software Reset for RMON RAM 1 */ -#define GSWIP_BM_CTRL_RMON_RAM2_RES BIT(1) /* Software Reset for RMON RAM 2 */ - -/* PCE */ -#define GSWIP_PCE_TBL_KEY(x) (0x447 - (x)) -#define GSWIP_PCE_TBL_MASK 0x448 -#define GSWIP_PCE_TBL_VAL(x) (0x44D - (x)) -#define GSWIP_PCE_TBL_ADDR 0x44E -#define GSWIP_PCE_TBL_CTRL 0x44F -#define GSWIP_PCE_TBL_CTRL_BAS BIT(15) -#define GSWIP_PCE_TBL_CTRL_TYPE BIT(13) -#define GSWIP_PCE_TBL_CTRL_VLD BIT(12) -#define GSWIP_PCE_TBL_CTRL_KEYFORM BIT(11) -#define GSWIP_PCE_TBL_CTRL_GMAP_MASK GENMASK(10, 7) -#define GSWIP_PCE_TBL_CTRL_OPMOD_MASK GENMASK(6, 5) -#define GSWIP_PCE_TBL_CTRL_OPMOD_ADRD 0x00 -#define GSWIP_PCE_TBL_CTRL_OPMOD_ADWR 0x20 -#define GSWIP_PCE_TBL_CTRL_OPMOD_KSRD 0x40 -#define GSWIP_PCE_TBL_CTRL_OPMOD_KSWR 0x60 -#define GSWIP_PCE_TBL_CTRL_ADDR_MASK GENMASK(4, 0) -#define GSWIP_PCE_PMAP1 0x453 /* Monitoring port map */ -#define GSWIP_PCE_PMAP2 0x454 /* Default Multicast port map */ -#define GSWIP_PCE_PMAP3 0x455 /* Default Unknown Unicast port map */ -#define GSWIP_PCE_GCTRL_0 0x456 -#define GSWIP_PCE_GCTRL_0_MTFL BIT(0) /* MAC Table Flushing */ -#define GSWIP_PCE_GCTRL_0_MC_VALID BIT(3) -#define GSWIP_PCE_GCTRL_0_VLAN BIT(14) /* VLAN aware Switching */ -#define GSWIP_PCE_GCTRL_1 0x457 -#define GSWIP_PCE_GCTRL_1_MAC_GLOCK BIT(2) /* MAC Address table lock */ -#define GSWIP_PCE_GCTRL_1_MAC_GLOCK_MOD BIT(3) /* Mac address table lock forwarding mode */ -#define GSWIP_PCE_PCTRL_0p(p) (0x480 + ((p) * 0xA)) -#define GSWIP_PCE_PCTRL_0_TVM BIT(5) /* Transparent VLAN mode */ -#define GSWIP_PCE_PCTRL_0_VREP BIT(6) /* VLAN Replace Mode */ -#define GSWIP_PCE_PCTRL_0_INGRESS BIT(11) /* Accept special tag in ingress */ -#define GSWIP_PCE_PCTRL_0_PSTATE_LISTEN 0x0 -#define GSWIP_PCE_PCTRL_0_PSTATE_RX 0x1 -#define GSWIP_PCE_PCTRL_0_PSTATE_TX 0x2 -#define GSWIP_PCE_PCTRL_0_PSTATE_LEARNING 0x3 -#define GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING 0x7 -#define GSWIP_PCE_PCTRL_0_PSTATE_MASK GENMASK(2, 0) -#define GSWIP_PCE_VCTRL(p) (0x485 + ((p) * 0xA)) -#define GSWIP_PCE_VCTRL_UVR BIT(0) /* Unknown VLAN Rule */ -#define GSWIP_PCE_VCTRL_VIMR BIT(3) /* VLAN Ingress Member violation rule */ -#define GSWIP_PCE_VCTRL_VEMR BIT(4) /* VLAN Egress Member violation rule */ -#define GSWIP_PCE_VCTRL_VSR BIT(5) /* VLAN Security */ -#define GSWIP_PCE_VCTRL_VID0 BIT(6) /* Priority Tagged Rule */ -#define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) - -#define GSWIP_MAC_FLEN 0x8C5 -#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) -#define GSWIP_MAC_CTRL_0_PADEN BIT(8) -#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) -#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 -#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 -#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 -#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 -#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 -#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C -#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 -#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C -#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 -#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 -#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 -#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 -#define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) -#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ -#define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ - -/* Ethernet Switch Fetch DMA Port Control Register */ -#define GSWIP_FDMA_PCTRLp(p) (0xA80 + ((p) * 0x6)) -#define GSWIP_FDMA_PCTRL_EN BIT(0) /* FDMA Port Enable */ -#define GSWIP_FDMA_PCTRL_STEN BIT(1) /* Special Tag Insertion Enable */ -#define GSWIP_FDMA_PCTRL_VLANMOD_MASK GENMASK(4, 3) /* VLAN Modification Control */ -#define GSWIP_FDMA_PCTRL_VLANMOD_SHIFT 3 /* VLAN Modification Control */ -#define GSWIP_FDMA_PCTRL_VLANMOD_DIS (0x0 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_PRIO (0x1 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_ID (0x2 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) -#define GSWIP_FDMA_PCTRL_VLANMOD_BOTH (0x3 << GSWIP_FDMA_PCTRL_VLANMOD_SHIFT) - -/* Ethernet Switch Store DMA Port Control Register */ -#define GSWIP_SDMA_PCTRLp(p) (0xBC0 + ((p) * 0x6)) -#define GSWIP_SDMA_PCTRL_EN BIT(0) /* SDMA Port Enable */ -#define GSWIP_SDMA_PCTRL_FCEN BIT(1) /* Flow Control Enable */ -#define GSWIP_SDMA_PCTRL_PAUFWD BIT(3) /* Pause Frame Forwarding */ - -#define GSWIP_TABLE_ACTIVE_VLAN 0x01 -#define GSWIP_TABLE_VLAN_MAPPING 0x02 -#define GSWIP_TABLE_MAC_BRIDGE 0x0b -#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */ -#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */ -#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */ - -#define XRX200_GPHY_FW_ALIGN (16 * 1024) - -/* Maximum packet size supported by the switch. In theory this should be 10240, - * but long packets currently cause lock-ups with an MTU of over 2526. Medium - * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP - * over 2526), hence an MTU value of 2400 seems safe. This issue only affects - * packet reception. This is probably caused by the PPA engine, which is on the - * RX part of the device. Packet transmission works properly up to 10240. - */ -#define GSWIP_MAX_PACKET_LENGTH 2400 - -struct gswip_hw_info { - int max_ports; - int cpu_port; - const struct dsa_switch_ops *ops; -}; - -struct xway_gphy_match_data { - char *fe_firmware_name; - char *ge_firmware_name; -}; - -struct gswip_gphy_fw { - struct clk *clk_gate; - struct reset_control *reset; - u32 fw_addr_offset; - char *fw_name; -}; - -struct gswip_vlan { - struct net_device *bridge; - u16 vid; - u8 fid; -}; - -struct gswip_priv { - __iomem void *gswip; - __iomem void *mdio; - __iomem void *mii; - const struct gswip_hw_info *hw_info; - const struct xway_gphy_match_data *gphy_fw_name_cfg; - struct dsa_switch *ds; - struct device *dev; - struct regmap *rcu_regmap; - struct gswip_vlan vlans[64]; - int num_gphy_fw; - struct gswip_gphy_fw *gphy_fw; - u32 port_vlan_filter; - struct mutex pce_table_lock; -}; - -struct gswip_pce_table_entry { - u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index - u16 table; // PCE_TBL_CTRL.ADDR = pData->table - u16 key[8]; - u16 val[5]; - u16 mask; - u8 gmap; - bool type; - bool valid; - bool key_mode; -}; - -struct gswip_rmon_cnt_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} - -static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { - /** Receive Packet Count (only packets that are accepted and not discarded). */ - MIB_DESC(1, 0x1F, "RxGoodPkts"), - MIB_DESC(1, 0x23, "RxUnicastPkts"), - MIB_DESC(1, 0x22, "RxMulticastPkts"), - MIB_DESC(1, 0x21, "RxFCSErrorPkts"), - MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), - MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), - MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), - MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), - MIB_DESC(1, 0x20, "RxGoodPausePkts"), - MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), - MIB_DESC(1, 0x12, "Rx64BytePkts"), - MIB_DESC(1, 0x13, "Rx127BytePkts"), - MIB_DESC(1, 0x14, "Rx255BytePkts"), - MIB_DESC(1, 0x15, "Rx511BytePkts"), - MIB_DESC(1, 0x16, "Rx1023BytePkts"), - /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x17, "RxMaxBytePkts"), - MIB_DESC(1, 0x18, "RxDroppedPkts"), - MIB_DESC(1, 0x19, "RxFilteredPkts"), - MIB_DESC(2, 0x24, "RxGoodBytes"), - MIB_DESC(2, 0x26, "RxBadBytes"), - MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), - MIB_DESC(1, 0x0C, "TxGoodPkts"), - MIB_DESC(1, 0x06, "TxUnicastPkts"), - MIB_DESC(1, 0x07, "TxMulticastPkts"), - MIB_DESC(1, 0x00, "Tx64BytePkts"), - MIB_DESC(1, 0x01, "Tx127BytePkts"), - MIB_DESC(1, 0x02, "Tx255BytePkts"), - MIB_DESC(1, 0x03, "Tx511BytePkts"), - MIB_DESC(1, 0x04, "Tx1023BytePkts"), - /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x05, "TxMaxBytePkts"), - MIB_DESC(1, 0x08, "TxSingleCollCount"), - MIB_DESC(1, 0x09, "TxMultCollCount"), - MIB_DESC(1, 0x0A, "TxLateCollCount"), - MIB_DESC(1, 0x0B, "TxExcessCollCount"), - MIB_DESC(1, 0x0D, "TxPauseCount"), - MIB_DESC(1, 0x10, "TxDroppedPkts"), - MIB_DESC(2, 0x0E, "TxGoodBytes"), -}; - -static u32 gswip_switch_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->gswip + (offset * 4)); -} - -static void gswip_switch_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->gswip + (offset * 4)); -} - -static void gswip_switch_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_switch_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_switch_w(priv, val, offset); -} - -static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, - u32 cleared) -{ - u32 val; - - return readx_poll_timeout(__raw_readl, priv->gswip + (offset * 4), val, - (val & cleared) == 0, 20, 50000); -} - -static u32 gswip_mdio_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->mdio + (offset * 4)); -} - -static void gswip_mdio_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->mdio + (offset * 4)); -} - -static void gswip_mdio_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_mdio_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_mdio_w(priv, val, offset); -} - -static u32 gswip_mii_r(struct gswip_priv *priv, u32 offset) -{ - return __raw_readl(priv->mii + (offset * 4)); -} - -static void gswip_mii_w(struct gswip_priv *priv, u32 val, u32 offset) -{ - __raw_writel(val, priv->mii + (offset * 4)); -} - -static void gswip_mii_mask(struct gswip_priv *priv, u32 clear, u32 set, - u32 offset) -{ - u32 val = gswip_mii_r(priv, offset); - - val &= ~(clear); - val |= set; - gswip_mii_w(priv, val, offset); -} - -static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 clear, u32 set, - int port) -{ - /* There's no MII_CFG register for the CPU port */ - if (!dsa_is_cpu_port(priv->ds, port)) - gswip_mii_mask(priv, clear, set, GSWIP_MII_CFGp(port)); -} - -static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 clear, u32 set, - int port) -{ - switch (port) { - case 0: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU0); - break; - case 1: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU1); - break; - case 5: - gswip_mii_mask(priv, clear, set, GSWIP_MII_PCDU5); - break; - } -} - -static int gswip_mdio_poll(struct gswip_priv *priv) -{ - int cnt = 100; - - while (likely(cnt--)) { - u32 ctrl = gswip_mdio_r(priv, GSWIP_MDIO_CTRL); - - if ((ctrl & GSWIP_MDIO_CTRL_BUSY) == 0) - return 0; - usleep_range(20, 40); - } - - return -ETIMEDOUT; -} - -static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct gswip_priv *priv = bus->priv; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - gswip_mdio_w(priv, val, GSWIP_MDIO_WRITE); - gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK), - GSWIP_MDIO_CTRL); - - return 0; -} - -static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) -{ - struct gswip_priv *priv = bus->priv; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - gswip_mdio_w(priv, GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK), - GSWIP_MDIO_CTRL); - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - return gswip_mdio_r(priv, GSWIP_MDIO_READ); -} - -static int gswip_mdio(struct gswip_priv *priv) -{ - struct device_node *mdio_np, *switch_np = priv->dev->of_node; - struct device *dev = priv->dev; - struct mii_bus *bus; - int err = 0; - - mdio_np = of_get_compatible_child(switch_np, "lantiq,xrx200-mdio"); - if (!of_device_is_available(mdio_np)) - goto out_put_node; - - bus = devm_mdiobus_alloc(dev); - if (!bus) { - err = -ENOMEM; - goto out_put_node; - } - - bus->priv = priv; - bus->read = gswip_mdio_rd; - bus->write = gswip_mdio_wr; - bus->name = "lantiq,xrx200-mdio"; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); - bus->parent = priv->dev; - - err = devm_of_mdiobus_register(dev, bus, mdio_np); - -out_put_node: - of_node_put(mdio_np); - - return err; -} - -static int gswip_pce_table_entry_read(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u16 crtl; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : - GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR); - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS, - GSWIP_PCE_TBL_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) - tbl->key[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_KEY(i)); - - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) - tbl->val[i] = gswip_switch_r(priv, GSWIP_PCE_TBL_VAL(i)); - - tbl->mask = gswip_switch_r(priv, GSWIP_PCE_TBL_MASK); - - crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL); - - tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); - tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); - tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; - - mutex_unlock(&priv->pce_table_lock); - - return 0; -} - -static int gswip_pce_table_entry_write(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u16 crtl; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - gswip_switch_w(priv, tbl->index, GSWIP_PCE_TBL_ADDR); - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode, - GSWIP_PCE_TBL_CTRL); - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) - gswip_switch_w(priv, tbl->key[i], GSWIP_PCE_TBL_KEY(i)); - - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) - gswip_switch_w(priv, tbl->val[i], GSWIP_PCE_TBL_VAL(i)); - - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode, - GSWIP_PCE_TBL_CTRL); - - gswip_switch_w(priv, tbl->mask, GSWIP_PCE_TBL_MASK); - - crtl = gswip_switch_r(priv, GSWIP_PCE_TBL_CTRL); - crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | - GSWIP_PCE_TBL_CTRL_GMAP_MASK); - if (tbl->type) - crtl |= GSWIP_PCE_TBL_CTRL_TYPE; - if (tbl->valid) - crtl |= GSWIP_PCE_TBL_CTRL_VLD; - crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; - crtl |= GSWIP_PCE_TBL_CTRL_BAS; - gswip_switch_w(priv, crtl, GSWIP_PCE_TBL_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - - mutex_unlock(&priv->pce_table_lock); - - return err; -} - -/* Add the LAN port into a bridge with the CPU port by - * default. This prevents automatic forwarding of - * packages between the LAN ports when no explicit - * bridge is configured. - */ -static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int cpu_port = priv->hw_info->cpu_port; - int err; - - vlan_active.index = port + 1; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = 0; /* vid */ - vlan_active.val[0] = port + 1 /* fid */; - vlan_active.valid = add; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - if (!add) - return 0; - - vlan_mapping.index = port + 1; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - vlan_mapping.val[0] = 0 /* vid */; - vlan_mapping.val[1] = BIT(port) | BIT(cpu_port); - vlan_mapping.val[2] = 0; - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - return 0; -} - -static int gswip_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct gswip_priv *priv = ds->priv; - int err; - - if (!dsa_is_cpu_port(ds, port)) { - u32 mdio_phy = 0; - - err = gswip_add_single_port_br(priv, port, true); - if (err) - return err; - - if (phydev) - mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); - } - - /* RMON Counter Enable for port */ - gswip_switch_w(priv, GSWIP_BM_PCFG_CNTEN, GSWIP_BM_PCFGp(port)); - - /* enable port fetch/store dma & VLAN Modification */ - gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_EN | - GSWIP_FDMA_PCTRL_VLANMOD_BOTH, - GSWIP_FDMA_PCTRLp(port)); - gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN, - GSWIP_SDMA_PCTRLp(port)); - - return 0; -} - -static void gswip_port_disable(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - - gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0, - GSWIP_FDMA_PCTRLp(port)); - gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, - GSWIP_SDMA_PCTRLp(port)); -} - -static int gswip_pce_load_microcode(struct gswip_priv *priv) -{ - int i; - int err; - - gswip_switch_mask(priv, GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, GSWIP_PCE_TBL_CTRL); - gswip_switch_w(priv, 0, GSWIP_PCE_TBL_MASK); - - for (i = 0; i < ARRAY_SIZE(gswip_pce_microcode); i++) { - gswip_switch_w(priv, i, GSWIP_PCE_TBL_ADDR); - gswip_switch_w(priv, gswip_pce_microcode[i].val_0, - GSWIP_PCE_TBL_VAL(0)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_1, - GSWIP_PCE_TBL_VAL(1)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_2, - GSWIP_PCE_TBL_VAL(2)); - gswip_switch_w(priv, gswip_pce_microcode[i].val_3, - GSWIP_PCE_TBL_VAL(3)); - - /* start the table access: */ - gswip_switch_mask(priv, 0, GSWIP_PCE_TBL_CTRL_BAS, - GSWIP_PCE_TBL_CTRL); - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) - return err; - } - - /* tell the switch that the microcode is loaded */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MC_VALID, - GSWIP_PCE_GCTRL_0); - - return 0; -} - -static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - - /* Do not allow changing the VLAN filtering options while in bridge */ - if (bridge && !!(priv->port_vlan_filter & BIT(port)) != vlan_filtering) { - NL_SET_ERR_MSG_MOD(extack, - "Dynamic toggling of vlan_filtering not supported"); - return -EIO; - } - - if (vlan_filtering) { - /* Use tag based VLAN */ - gswip_switch_mask(priv, - GSWIP_PCE_VCTRL_VSR, - GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR, - GSWIP_PCE_VCTRL(port)); - gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0, - GSWIP_PCE_PCTRL_0p(port)); - } else { - /* Use port based VLAN */ - gswip_switch_mask(priv, - GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR, - GSWIP_PCE_VCTRL_VSR, - GSWIP_PCE_VCTRL(port)); - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_TVM, - GSWIP_PCE_PCTRL_0p(port)); - } - - return 0; -} - -static int gswip_setup(struct dsa_switch *ds) -{ - struct gswip_priv *priv = ds->priv; - unsigned int cpu_port = priv->hw_info->cpu_port; - int i; - int err; - - gswip_switch_w(priv, GSWIP_SWRES_R0, GSWIP_SWRES); - usleep_range(5000, 10000); - gswip_switch_w(priv, 0, GSWIP_SWRES); - - /* disable port fetch/store dma on all ports */ - for (i = 0; i < priv->hw_info->max_ports; i++) { - gswip_port_disable(ds, i); - gswip_port_vlan_filtering(ds, i, false, NULL); - } - - /* enable Switch */ - gswip_mdio_mask(priv, 0, GSWIP_MDIO_GLOB_ENABLE, GSWIP_MDIO_GLOB); - - err = gswip_pce_load_microcode(priv); - if (err) { - dev_err(priv->dev, "writing PCE microcode failed, %i\n", err); - return err; - } - - /* Default unknown Broadcast/Multicast/Unicast port maps */ - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP1); - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2); - gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3); - - /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an - * interoperability problem with this auto polling mechanism because - * their status registers think that the link is in a different state - * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set - * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the - * auto polling state machine consider the link being negotiated with - * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads - * to the switch port being completely dead (RX and TX are both not - * working). - * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F - * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes - * it would work fine for a few minutes to hours and then stop, on - * other device it would no traffic could be sent or received at all. - * Testing shows that when PHY auto polling is disabled these problems - * go away. - */ - gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0); - - /* Configure the MDIO Clock 2.5 MHz */ - gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - - /* Disable the xMII interface and clear it's isolation bit */ - for (i = 0; i < priv->hw_info->max_ports; i++) - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, - 0, i); - - /* enable special tag insertion on cpu port */ - gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, - GSWIP_FDMA_PCTRLp(cpu_port)); - - /* accept special tag in ingress direction */ - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, - GSWIP_PCE_PCTRL_0p(cpu_port)); - - gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, - GSWIP_BM_QUEUE_GCTRL); - - /* VLAN aware Switching */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_VLAN, GSWIP_PCE_GCTRL_0); - - /* Flush MAC Table */ - gswip_switch_mask(priv, 0, GSWIP_PCE_GCTRL_0_MTFL, GSWIP_PCE_GCTRL_0); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_MTFL); - if (err) { - dev_err(priv->dev, "MAC flushing didn't finish\n"); - return err; - } - - ds->mtu_enforcement_ingress = true; - - ds->configure_vlan_while_not_filtering = false; - - return 0; -} - -static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, - int port, - enum dsa_tag_protocol mp) -{ - return DSA_TAG_PROTO_GSWIP; -} - -static int gswip_vlan_active_create(struct gswip_priv *priv, - struct net_device *bridge, - int fid, u16 vid) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int idx = -1; - int err; - int i; - - /* Look for a free slot */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (!priv->vlans[i].bridge) { - idx = i; - break; - } - } - - if (idx == -1) - return -ENOSPC; - - if (fid == -1) - fid = idx; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = vid; - vlan_active.val[0] = fid; - vlan_active.valid = true; - - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - priv->vlans[idx].bridge = bridge; - priv->vlans[idx].vid = vid; - priv->vlans[idx].fid = fid; - - return idx; -} - -static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - int err; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.valid = false; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) - dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); - priv->vlans[idx].bridge = NULL; - - return err; -} - -static int gswip_vlan_add_unaware(struct gswip_priv *priv, - struct net_device *bridge, int port) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - bool active_vlan_created = false; - int idx = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - idx = i; - break; - } - } - - /* If this bridge is not programmed yet, add a Active VLAN table - * entry in a free slot and prepare the VLAN mapping table entry. - */ - if (idx == -1) { - idx = gswip_vlan_active_create(priv, bridge, -1, 0); - if (idx < 0) - return idx; - active_vlan_created = true; - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - /* VLAN ID byte, maps to the VLAN ID of vlan active table */ - vlan_mapping.val[0] = 0; - } else { - /* Read the existing VLAN mapping entry from the switch */ - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", - err); - return err; - } - } - - /* Update the VLAN mapping entry and write it to the switch */ - vlan_mapping.val[1] |= BIT(cpu_port); - vlan_mapping.val[1] |= BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - /* In case an Active VLAN was creaetd delete it again */ - if (active_vlan_created) - gswip_vlan_active_remove(priv, idx); - return err; - } - - gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port)); - return 0; -} - -static int gswip_vlan_add_aware(struct gswip_priv *priv, - struct net_device *bridge, int port, - u16 vid, bool untagged, - bool pvid) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - bool active_vlan_created = false; - int idx = -1; - int fid = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - if (fid != -1 && fid != priv->vlans[i].fid) - dev_err(priv->dev, "one bridge with multiple flow ids\n"); - fid = priv->vlans[i].fid; - if (priv->vlans[i].vid == vid) { - idx = i; - break; - } - } - } - - /* If this bridge is not programmed yet, add a Active VLAN table - * entry in a free slot and prepare the VLAN mapping table entry. - */ - if (idx == -1) { - idx = gswip_vlan_active_create(priv, bridge, fid, vid); - if (idx < 0) - return idx; - active_vlan_created = true; - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - /* VLAN ID byte, maps to the VLAN ID of vlan active table */ - vlan_mapping.val[0] = vid; - } else { - /* Read the existing VLAN mapping entry from the switch */ - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", - err); - return err; - } - } - - vlan_mapping.val[0] = vid; - /* Update the VLAN mapping entry and write it to the switch */ - vlan_mapping.val[1] |= BIT(cpu_port); - vlan_mapping.val[2] |= BIT(cpu_port); - vlan_mapping.val[1] |= BIT(port); - if (untagged) - vlan_mapping.val[2] &= ~BIT(port); - else - vlan_mapping.val[2] |= BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - /* In case an Active VLAN was creaetd delete it again */ - if (active_vlan_created) - gswip_vlan_active_remove(priv, idx); - return err; - } - - if (pvid) - gswip_switch_w(priv, idx, GSWIP_PCE_DEFPVID(port)); - - return 0; -} - -static int gswip_vlan_remove(struct gswip_priv *priv, - struct net_device *bridge, int port, - u16 vid, bool pvid, bool vlan_aware) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_port = priv->hw_info->cpu_port; - int idx = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - (!vlan_aware || priv->vlans[i].vid == vid)) { - idx = i; - break; - } - } - - if (idx == -1) { - dev_err(priv->dev, "bridge to leave does not exists\n"); - return -ENOENT; - } - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); - return err; - } - - vlan_mapping.val[1] &= ~BIT(port); - vlan_mapping.val[2] &= ~BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - /* In case all ports are removed from the bridge, remove the VLAN */ - if ((vlan_mapping.val[1] & ~BIT(cpu_port)) == 0) { - err = gswip_vlan_active_remove(priv, idx); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", - err); - return err; - } - } - - /* GSWIP 2.2 (GRX300) and later program here the VID directly. */ - if (pvid) - gswip_switch_w(priv, 0, GSWIP_PCE_DEFPVID(port)); - - return 0; -} - -static int gswip_port_bridge_join(struct dsa_switch *ds, int port, - struct dsa_bridge bridge, - bool *tx_fwd_offload, - struct netlink_ext_ack *extack) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - int err; - - /* When the bridge uses VLAN filtering we have to configure VLAN - * specific bridges. No bridge is configured here. - */ - if (!br_vlan_enabled(br)) { - err = gswip_vlan_add_unaware(priv, br, port); - if (err) - return err; - priv->port_vlan_filter &= ~BIT(port); - } else { - priv->port_vlan_filter |= BIT(port); - } - return gswip_add_single_port_br(priv, port, false); -} - -static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, - struct dsa_bridge bridge) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - - gswip_add_single_port_br(priv, port, true); - - /* When the bridge uses VLAN filtering we have to configure VLAN - * specific bridges. No bridge is configured here. - */ - if (!br_vlan_enabled(br)) - gswip_vlan_remove(priv, br, port, 0, true, false); -} - -static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - unsigned int max_ports = priv->hw_info->max_ports; - int pos = max_ports; - int i, idx = -1; - - /* We only support VLAN filtering on bridges */ - if (!dsa_is_cpu_port(ds, port) && !bridge) - return -EOPNOTSUPP; - - /* Check if there is already a page for this VLAN */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - priv->vlans[i].vid == vlan->vid) { - idx = i; - break; - } - } - - /* If this VLAN is not programmed yet, we have to reserve - * one entry in the VLAN table. Make sure we start at the - * next position round. - */ - if (idx == -1) { - /* Look for a free slot */ - for (; pos < ARRAY_SIZE(priv->vlans); pos++) { - if (!priv->vlans[pos].bridge) { - idx = pos; - pos++; - break; - } - } - - if (idx == -1) { - NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); - return -ENOSPC; - } - } - - return 0; -} - -static int gswip_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - int err; - - err = gswip_port_vlan_prepare(ds, port, vlan, extack); - if (err) - return err; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_add_aware(priv, bridge, port, vlan->vid, - untagged, pvid); -} - -static int gswip_port_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_remove(priv, bridge, port, vlan->vid, pvid, true); -} - -static void gswip_port_fast_age(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to read mac bridge: %d\n", - err); - return; - } - - if (!mac_bridge.valid) - continue; - - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) - continue; - - if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, - mac_bridge.val[0])) - continue; - - mac_bridge.valid = false; - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to write mac bridge: %d\n", - err); - return; - } - } -} - -static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - struct gswip_priv *priv = ds->priv; - u32 stp_state; - - switch (state) { - case BR_STATE_DISABLED: - gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, - GSWIP_SDMA_PCTRLp(port)); - return; - case BR_STATE_BLOCKING: - case BR_STATE_LISTENING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; - break; - case BR_STATE_LEARNING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; - break; - case BR_STATE_FORWARDING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; - break; - default: - dev_err(priv->dev, "invalid STP state: %d\n", state); - return; - } - - gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN, - GSWIP_SDMA_PCTRLp(port)); - gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_PSTATE_MASK, stp_state, - GSWIP_PCE_PCTRL_0p(port)); -} - -static int gswip_port_fdb(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, bool add) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int fid = -1; - int i; - int err; - - if (!bridge) - return -EINVAL; - - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - fid = priv->vlans[i].fid; - break; - } - } - - if (fid == -1) { - dev_err(priv->dev, "no FID found for bridge %s\n", - bridge->name); - return -EINVAL; - } - - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.key_mode = true; - mac_bridge.key[0] = addr[5] | (addr[4] << 8); - mac_bridge.key[1] = addr[3] | (addr[2] << 8); - mac_bridge.key[2] = addr[1] | (addr[0] << 8); - mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid); - mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ - mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC; - mac_bridge.valid = add; - - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) - dev_err(priv->dev, "failed to write mac bridge: %d\n", err); - - return err; -} - -static int gswip_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - return gswip_port_fdb(ds, port, addr, vid, true); -} - -static int gswip_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - return gswip_port_fdb(ds, port, addr, vid, false); -} - -static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned char addr[ETH_ALEN]; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, - "failed to read mac bridge entry %d: %d\n", - i, err); - return err; - } - - if (!mac_bridge.valid) - continue; - - addr[5] = mac_bridge.key[0] & 0xff; - addr[4] = (mac_bridge.key[0] >> 8) & 0xff; - addr[3] = mac_bridge.key[1] & 0xff; - addr[2] = (mac_bridge.key[1] >> 8) & 0xff; - addr[1] = mac_bridge.key[2] & 0xff; - addr[0] = (mac_bridge.key[2] >> 8) & 0xff; - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) { - if (mac_bridge.val[0] & BIT(port)) { - err = cb(addr, 0, true, data); - if (err) - return err; - } - } else { - if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, - mac_bridge.val[0])) { - err = cb(addr, 0, false, data); - if (err) - return err; - } - } - } - return 0; -} - -static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -{ - /* Includes 8 bytes for special header. */ - return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -} - -static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -{ - struct gswip_priv *priv = ds->priv; - - /* CPU port always has maximum mtu of user ports, so use it to set - * switch frame size, including 8 byte special header. - */ - if (dsa_is_cpu_port(ds, port)) { - new_mtu += 8; - gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, - GSWIP_MAC_FLEN); - } - - /* Enable MLEN for ports with non-standard MTUs, including the special - * header on the CPU port added above. - */ - if (new_mtu != ETH_DATA_LEN) - gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, - GSWIP_MAC_CTRL_2p(port)); - else - gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, - GSWIP_MAC_CTRL_2p(port)); - - return 0; -} - -static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port, - struct phylink_config *config) -{ - switch (port) { - case 0: - case 1: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_MII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_REVMII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - - case 2: - case 3: - case 4: - case 6: - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - - case 5: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - } - - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; -} - -static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port, - struct phylink_config *config) -{ - switch (port) { - case 0: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_GMII, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - - case 1: - case 2: - case 3: - case 4: - case 6: - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - break; - - case 5: - phy_interface_set_rgmii(config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_INTERNAL, - config->supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_RMII, - config->supported_interfaces); - break; - } - - config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; -} - -static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) -{ - u32 mdio_phy; - - if (link) - mdio_phy = GSWIP_MDIO_PHY_LINK_UP; - else - mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); -} - -static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, - phy_interface_t interface) -{ - u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; - - switch (speed) { - case SPEED_10: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M2P5; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_100: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M25; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_1000: - mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; - - mii_cfg = GSWIP_MII_CFG_RATE_M125; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; - break; - } - - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0, - GSWIP_MAC_CTRL_0p(port)); -} - -static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) -{ - u32 mac_ctrl_0, mdio_phy; - - if (duplex == DUPLEX_FULL) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; - mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; - mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; - } - - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0, - GSWIP_MAC_CTRL_0p(port)); - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy, - GSWIP_MDIO_PHYp(port)); -} - -static void gswip_port_set_pause(struct gswip_priv *priv, int port, - bool tx_pause, bool rx_pause) -{ - u32 mac_ctrl_0, mdio_phy; - - if (tx_pause && rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_EN; - } else if (tx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_DIS; - } else if (rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_DIS; - } - - gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK, - mac_ctrl_0, GSWIP_MAC_CTRL_0p(port)); - gswip_mdio_mask(priv, - GSWIP_MDIO_PHY_FCONTX_MASK | - GSWIP_MDIO_PHY_FCONRX_MASK, - mdio_phy, GSWIP_MDIO_PHYp(port)); -} - -static void gswip_phylink_mac_config(struct phylink_config *config, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - u32 miicfg = 0; - - miicfg |= GSWIP_MII_CFG_LDCLKDIS; - - switch (state->interface) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_INTERNAL: - miicfg |= GSWIP_MII_CFG_MODE_MIIM; - break; - case PHY_INTERFACE_MODE_REVMII: - miicfg |= GSWIP_MII_CFG_MODE_MIIP; - break; - case PHY_INTERFACE_MODE_RMII: - miicfg |= GSWIP_MII_CFG_MODE_RMIIM; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - miicfg |= GSWIP_MII_CFG_MODE_RGMII; - break; - case PHY_INTERFACE_MODE_GMII: - miicfg |= GSWIP_MII_CFG_MODE_GMII; - break; - default: - dev_err(dp->ds->dev, - "Unsupported interface: %d\n", state->interface); - return; - } - - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | - GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, - miicfg, port); - - switch (state->interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK | - GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port); - break; - default: - break; - } -} - -static void gswip_phylink_mac_link_down(struct phylink_config *config, - unsigned int mode, - phy_interface_t interface) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); - - if (!dsa_port_is_cpu(dp)) - gswip_port_set_link(priv, port, false); -} - -static void gswip_phylink_mac_link_up(struct phylink_config *config, - struct phy_device *phydev, - unsigned int mode, - phy_interface_t interface, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - - if (!dsa_port_is_cpu(dp)) { - gswip_port_set_link(priv, port, true); - gswip_port_set_speed(priv, port, speed, interface); - gswip_port_set_duplex(priv, port, duplex); - gswip_port_set_pause(priv, port, tx_pause, rx_pause); - } - - gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port); -} - -static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, - uint8_t *data) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) - ethtool_puts(&data, gswip_rmon_cnt[i].name); -} - -static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, - u32 index) -{ - u32 result; - int err; - - gswip_switch_w(priv, index, GSWIP_BM_RAM_ADDR); - gswip_switch_mask(priv, GSWIP_BM_RAM_CTRL_ADDR_MASK | - GSWIP_BM_RAM_CTRL_OPMOD, - table | GSWIP_BM_RAM_CTRL_BAS, - GSWIP_BM_RAM_CTRL); - - err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, - GSWIP_BM_RAM_CTRL_BAS); - if (err) { - dev_err(priv->dev, "timeout while reading table: %u, index: %u\n", - table, index); - return 0; - } - - result = gswip_switch_r(priv, GSWIP_BM_RAM_VAL(0)); - result |= gswip_switch_r(priv, GSWIP_BM_RAM_VAL(1)) << 16; - - return result; -} - -static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct gswip_priv *priv = ds->priv; - const struct gswip_rmon_cnt_desc *rmon_cnt; - int i; - u64 high; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { - rmon_cnt = &gswip_rmon_cnt[i]; - - data[i] = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset); - if (rmon_cnt->size == 2) { - high = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset + 1); - data[i] |= high << 32; - } - } -} - -static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(gswip_rmon_cnt); -} - -static const struct phylink_mac_ops gswip_phylink_mac_ops = { - .mac_config = gswip_phylink_mac_config, - .mac_link_down = gswip_phylink_mac_link_down, - .mac_link_up = gswip_phylink_mac_link_up, -}; - -static const struct dsa_switch_ops gswip_xrx200_switch_ops = { - .get_tag_protocol = gswip_get_tag_protocol, - .setup = gswip_setup, - .port_enable = gswip_port_enable, - .port_disable = gswip_port_disable, - .port_bridge_join = gswip_port_bridge_join, - .port_bridge_leave = gswip_port_bridge_leave, - .port_fast_age = gswip_port_fast_age, - .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_add = gswip_port_vlan_add, - .port_vlan_del = gswip_port_vlan_del, - .port_stp_state_set = gswip_port_stp_state_set, - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, - .port_change_mtu = gswip_port_change_mtu, - .port_max_mtu = gswip_port_max_mtu, - .phylink_get_caps = gswip_xrx200_phylink_get_caps, - .get_strings = gswip_get_strings, - .get_ethtool_stats = gswip_get_ethtool_stats, - .get_sset_count = gswip_get_sset_count, -}; - -static const struct dsa_switch_ops gswip_xrx300_switch_ops = { - .get_tag_protocol = gswip_get_tag_protocol, - .setup = gswip_setup, - .port_enable = gswip_port_enable, - .port_disable = gswip_port_disable, - .port_bridge_join = gswip_port_bridge_join, - .port_bridge_leave = gswip_port_bridge_leave, - .port_fast_age = gswip_port_fast_age, - .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_add = gswip_port_vlan_add, - .port_vlan_del = gswip_port_vlan_del, - .port_stp_state_set = gswip_port_stp_state_set, - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, - .port_change_mtu = gswip_port_change_mtu, - .port_max_mtu = gswip_port_max_mtu, - .phylink_get_caps = gswip_xrx300_phylink_get_caps, - .get_strings = gswip_get_strings, - .get_ethtool_stats = gswip_get_ethtool_stats, - .get_sset_count = gswip_get_sset_count, -}; - -static const struct xway_gphy_match_data xrx200a1x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", -}; - -static const struct xway_gphy_match_data xrx200a2x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", -}; - -static const struct xway_gphy_match_data xrx300_gphy_data = { - .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", - .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", -}; - -static const struct of_device_id xway_gphy_match[] __maybe_unused = { - { .compatible = "lantiq,xrx200-gphy-fw", .data = NULL }, - { .compatible = "lantiq,xrx200a1x-gphy-fw", .data = &xrx200a1x_gphy_data }, - { .compatible = "lantiq,xrx200a2x-gphy-fw", .data = &xrx200a2x_gphy_data }, - { .compatible = "lantiq,xrx300-gphy-fw", .data = &xrx300_gphy_data }, - { .compatible = "lantiq,xrx330-gphy-fw", .data = &xrx300_gphy_data }, - {}, -}; - -static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gphy_fw) -{ - struct device *dev = priv->dev; - const struct firmware *fw; - void *fw_addr; - dma_addr_t dma_addr; - dma_addr_t dev_addr; - size_t size; - int ret; - - ret = clk_prepare_enable(gphy_fw->clk_gate); - if (ret) - return ret; - - reset_control_assert(gphy_fw->reset); - - /* The vendor BSP uses a 200ms delay after asserting the reset line. - * Without this some users are observing that the PHY is not coming up - * on the MDIO bus. - */ - msleep(200); - - ret = request_firmware(&fw, gphy_fw->fw_name, dev); - if (ret) - return dev_err_probe(dev, ret, "failed to load firmware: %s\n", - gphy_fw->fw_name); - - /* GPHY cores need the firmware code in a persistent and contiguous - * memory area with a 16 kB boundary aligned start address. - */ - size = fw->size + XRX200_GPHY_FW_ALIGN; - - fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); - if (fw_addr) { - fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); - dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); - memcpy(fw_addr, fw->data, fw->size); - } else { - release_firmware(fw); - return dev_err_probe(dev, -ENOMEM, - "failed to alloc firmware memory\n"); - } - - release_firmware(fw); - - ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, dev_addr); - if (ret) - return ret; - - reset_control_deassert(gphy_fw->reset); - - return ret; -} - -static int gswip_gphy_fw_probe(struct gswip_priv *priv, - struct gswip_gphy_fw *gphy_fw, - struct device_node *gphy_fw_np, int i) -{ - struct device *dev = priv->dev; - u32 gphy_mode; - int ret; - char gphyname[10]; - - snprintf(gphyname, sizeof(gphyname), "gphy%d", i); - - gphy_fw->clk_gate = devm_clk_get(dev, gphyname); - if (IS_ERR(gphy_fw->clk_gate)) { - return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate), - "Failed to lookup gate clock\n"); - } - - ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset); - if (ret) - return ret; - - ret = of_property_read_u32(gphy_fw_np, "lantiq,gphy-mode", &gphy_mode); - /* Default to GE mode */ - if (ret) - gphy_mode = GPHY_MODE_GE; - - switch (gphy_mode) { - case GPHY_MODE_FE: - gphy_fw->fw_name = priv->gphy_fw_name_cfg->fe_firmware_name; - break; - case GPHY_MODE_GE: - gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name; - break; - default: - return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n", - gphy_mode); - } - - gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np); - if (IS_ERR(gphy_fw->reset)) - return dev_err_probe(dev, PTR_ERR(gphy_fw->reset), - "Failed to lookup gphy reset\n"); - - return gswip_gphy_fw_load(priv, gphy_fw); -} - -static void gswip_gphy_fw_remove(struct gswip_priv *priv, - struct gswip_gphy_fw *gphy_fw) -{ - int ret; - - /* check if the device was fully probed */ - if (!gphy_fw->fw_name) - return; - - ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0); - if (ret) - dev_err(priv->dev, "can not reset GPHY FW pointer\n"); - - clk_disable_unprepare(gphy_fw->clk_gate); - - reset_control_put(gphy_fw->reset); -} - -static int gswip_gphy_fw_list(struct gswip_priv *priv, - struct device_node *gphy_fw_list_np, u32 version) -{ - struct device *dev = priv->dev; - struct device_node *gphy_fw_np; - const struct of_device_id *match; - int err; - int i = 0; - - /* The VRX200 rev 1.1 uses the GSWIP 2.0 and needs the older - * GPHY firmware. The VRX200 rev 1.2 uses the GSWIP 2.1 and also - * needs a different GPHY firmware. - */ - if (of_device_is_compatible(gphy_fw_list_np, "lantiq,xrx200-gphy-fw")) { - switch (version) { - case GSWIP_VERSION_2_0: - priv->gphy_fw_name_cfg = &xrx200a1x_gphy_data; - break; - case GSWIP_VERSION_2_1: - priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data; - break; - default: - return dev_err_probe(dev, -ENOENT, - "unknown GSWIP version: 0x%x\n", - version); - } - } - - match = of_match_node(xway_gphy_match, gphy_fw_list_np); - if (match && match->data) - priv->gphy_fw_name_cfg = match->data; - - if (!priv->gphy_fw_name_cfg) - return dev_err_probe(dev, -ENOENT, - "GPHY compatible type not supported\n"); - - priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np); - if (!priv->num_gphy_fw) - return -ENOENT; - - priv->rcu_regmap = syscon_regmap_lookup_by_phandle(gphy_fw_list_np, - "lantiq,rcu"); - if (IS_ERR(priv->rcu_regmap)) - return PTR_ERR(priv->rcu_regmap); - - priv->gphy_fw = devm_kmalloc_array(dev, priv->num_gphy_fw, - sizeof(*priv->gphy_fw), - GFP_KERNEL | __GFP_ZERO); - if (!priv->gphy_fw) - return -ENOMEM; - - for_each_available_child_of_node(gphy_fw_list_np, gphy_fw_np) { - err = gswip_gphy_fw_probe(priv, &priv->gphy_fw[i], - gphy_fw_np, i); - if (err) { - of_node_put(gphy_fw_np); - goto remove_gphy; - } - i++; - } - - /* The standalone PHY11G requires 300ms to be fully - * initialized and ready for any MDIO communication after being - * taken out of reset. For the SoC-internal GPHY variant there - * is no (known) documentation for the minimum time after a - * reset. Use the same value as for the standalone variant as - * some users have reported internal PHYs not being detected - * without any delay. - */ - msleep(300); - - return 0; - -remove_gphy: - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); - return err; -} - -static int gswip_probe(struct platform_device *pdev) -{ - struct device_node *np, *gphy_fw_np; - struct device *dev = &pdev->dev; - struct gswip_priv *priv; - int err; - int i; - u32 version; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->gswip = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(priv->gswip)) - return PTR_ERR(priv->gswip); - - priv->mdio = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(priv->mdio)) - return PTR_ERR(priv->mdio); - - priv->mii = devm_platform_ioremap_resource(pdev, 2); - if (IS_ERR(priv->mii)) - return PTR_ERR(priv->mii); - - priv->hw_info = of_device_get_match_data(dev); - if (!priv->hw_info) - return -EINVAL; - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->hw_info->max_ports; - priv->ds->priv = priv; - priv->ds->ops = priv->hw_info->ops; - priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops; - priv->dev = dev; - mutex_init(&priv->pce_table_lock); - version = gswip_switch_r(priv, GSWIP_VERSION); - - np = dev->of_node; - switch (version) { - case GSWIP_VERSION_2_0: - case GSWIP_VERSION_2_1: - if (!of_device_is_compatible(np, "lantiq,xrx200-gswip")) - return -EINVAL; - break; - case GSWIP_VERSION_2_2: - case GSWIP_VERSION_2_2_ETC: - if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") && - !of_device_is_compatible(np, "lantiq,xrx330-gswip")) - return -EINVAL; - break; - default: - return dev_err_probe(dev, -ENOENT, - "unknown GSWIP version: 0x%x\n", version); - } - - /* bring up the mdio bus */ - gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw"); - if (gphy_fw_np) { - err = gswip_gphy_fw_list(priv, gphy_fw_np, version); - of_node_put(gphy_fw_np); - if (err) - return dev_err_probe(dev, err, - "gphy fw probe failed\n"); - } - - /* bring up the mdio bus */ - err = gswip_mdio(priv); - if (err) { - dev_err_probe(dev, err, "mdio probe failed\n"); - goto gphy_fw_remove; - } - - err = dsa_register_switch(priv->ds); - if (err) { - dev_err_probe(dev, err, "dsa switch registration failed\n"); - goto gphy_fw_remove; - } - if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) { - err = dev_err_probe(dev, -EINVAL, - "wrong CPU port defined, HW only supports port: %i\n", - priv->hw_info->cpu_port); - goto disable_switch; - } - - platform_set_drvdata(pdev, priv); - - dev_info(dev, "probed GSWIP version %lx mod %lx\n", - (version & GSWIP_VERSION_REV_MASK) >> GSWIP_VERSION_REV_SHIFT, - (version & GSWIP_VERSION_MOD_MASK) >> GSWIP_VERSION_MOD_SHIFT); - return 0; - -disable_switch: - gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); - dsa_unregister_switch(priv->ds); -gphy_fw_remove: - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); - return err; -} - -static void gswip_remove(struct platform_device *pdev) -{ - struct gswip_priv *priv = platform_get_drvdata(pdev); - int i; - - if (!priv) - return; - - /* disable the switch */ - gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB); - - dsa_unregister_switch(priv->ds); - - for (i = 0; i < priv->num_gphy_fw; i++) - gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); -} - -static void gswip_shutdown(struct platform_device *pdev) -{ - struct gswip_priv *priv = platform_get_drvdata(pdev); - - if (!priv) - return; - - dsa_switch_shutdown(priv->ds); - - platform_set_drvdata(pdev, NULL); -} - -static const struct gswip_hw_info gswip_xrx200 = { - .max_ports = 7, - .cpu_port = 6, - .ops = &gswip_xrx200_switch_ops, -}; - -static const struct gswip_hw_info gswip_xrx300 = { - .max_ports = 7, - .cpu_port = 6, - .ops = &gswip_xrx300_switch_ops, -}; - -static const struct of_device_id gswip_of_match[] = { - { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, - { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, - { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, - {}, -}; -MODULE_DEVICE_TABLE(of, gswip_of_match); - -static struct platform_driver gswip_driver = { - .probe = gswip_probe, - .remove = gswip_remove, - .shutdown = gswip_shutdown, - .driver = { - .name = "gswip", - .of_match_table = gswip_of_match, - }, -}; - -module_platform_driver(gswip_driver); - -MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); -MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); -MODULE_DESCRIPTION("Lantiq / Intel GSWIP driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig index 12a86585a77f..c71d3fd5dfeb 100644 --- a/drivers/net/dsa/microchip/Kconfig +++ b/drivers/net/dsa/microchip/Kconfig @@ -6,6 +6,7 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON select NET_DSA_TAG_NONE select NET_IEEE8021Q_HELPERS select DCB + select PCS_XPCS help This driver adds support for Microchip KSZ8, KSZ9 and LAN937X series switch chips, being KSZ8863/8873, diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c index da7110d67558..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -3,6 +3,7 @@ * Microchip KSZ8XXX series switch driver * * It supports the following switches: + * - KSZ8463 * - KSZ8863, KSZ8873 aka KSZ88X3 * - KSZ8895, KSZ8864 aka KSZ8895 family * - KSZ8794, KSZ8795, KSZ8765 aka KSZ87XX @@ -35,14 +36,14 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } /** @@ -140,6 +141,11 @@ int ksz8_reset_switch(struct ksz_device *dev) KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true); ksz_cfg(dev, KSZ8863_REG_SW_RESET, KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false); + } else if (ksz_is_ksz8463(dev)) { + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, true); + ksz_cfg(dev, KSZ8463_REG_SW_RESET, + KSZ8463_GLOBAL_SOFTWARE_RESET, false); } else { /* reset switch */ ksz_write8(dev, REG_POWER_MANAGEMENT_1, @@ -194,6 +200,7 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return ksz8795_change_mtu(dev, frame_size); + case KSZ8463_CHIP_ID: case KSZ88X3_CHIP_ID: case KSZ8864_CHIP_ID: case KSZ8895_CHIP_ID: @@ -227,6 +234,11 @@ static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues) WEIGHTED_FAIR_QUEUE_ENABLE); if (ret) return ret; + } else if (ksz_is_ksz8463(dev)) { + mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN; + reg_4q = P1CR1; + reg_2q = P1CR1 + 1; } else { mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN; mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN; @@ -371,6 +383,9 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, addr -= dev->info->reg_mib_cnt; ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 : KSZ8863_MIB_PACKET_DROPPED_RX_0; + if (ksz_is_8895_family(dev) && + ctrl_addr == KSZ8863_MIB_PACKET_DROPPED_RX_0) + ctrl_addr = KSZ8895_MIB_PACKET_DROPPED_RX_0; ctrl_addr += port; ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); @@ -1265,12 +1280,15 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member) { + int offset = P_MIRROR_CTRL; u8 data; - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); - data &= ~PORT_VLAN_MEMBERSHIP; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_pread8(dev, port, offset, &data); + data &= ~dev->port_mask; data |= (member & dev->port_mask); - ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); + ksz_pwrite8(dev, port, offset, data); } void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) @@ -1278,6 +1296,8 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) u8 learn[DSA_MAX_PORTS]; int first, index, cnt; const u16 *regs; + int reg = S_FLUSH_TABLE_CTRL; + int mask = SW_FLUSH_DYN_MAC_TABLE; regs = dev->info->regs; @@ -1295,7 +1315,11 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index] | PORT_LEARN_DISABLE); } - ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + if (ksz_is_ksz8463(dev)) { + reg = KSZ8463_FLUSH_TABLE_CTRL; + mask = KSZ8463_FLUSH_DYN_MAC_TABLE; + } + ksz_cfg(dev, reg, mask, true); for (index = first; index < cnt; index++) { if (!(learn[index] & PORT_LEARN_DISABLE)) ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]); @@ -1434,7 +1458,7 @@ int ksz8_fdb_del(struct ksz_device *dev, int port, const unsigned char *addr, int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, struct netlink_ext_ack *extack) { - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* Discard packets with VID not enabled on the switch */ @@ -1450,9 +1474,12 @@ int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state) { - if (ksz_is_ksz88x3(dev)) { - ksz_cfg(dev, REG_SW_INSERT_SRC_PVID, - 0x03 << (4 - 2 * port), state); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { + int reg = REG_SW_INSERT_SRC_PVID; + + if (ksz_is_ksz8463(dev)) + reg = KSZ8463_REG_SW_CTRL_9; + ksz_cfg(dev, reg, 0x03 << (4 - 2 * port), state); } else { ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00); } @@ -1467,7 +1494,7 @@ int ksz8_port_vlan_add(struct ksz_device *dev, int port, u16 data, new_pvid = 0; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; /* If a VLAN is added with untagged flag different from the @@ -1536,7 +1563,7 @@ int ksz8_port_vlan_del(struct ksz_device *dev, int port, u16 data, pvid; u8 fid, member, valid; - if (ksz_is_ksz88x3(dev)) + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) return -ENOTSUPP; ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); @@ -1566,19 +1593,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress, struct netlink_ext_ack *extack) { + int offset = P_MIRROR_CTRL; + + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, true); dev->mirror_rx |= BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, true); dev->mirror_tx |= BIT(port); } - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_SNIFFER, false); /* configure mirror port */ if (dev->mirror_rx || dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, true); return 0; @@ -1587,20 +1618,23 @@ int ksz8_port_mirror_add(struct ksz_device *dev, int port, void ksz8_port_mirror_del(struct ksz_device *dev, int port, struct dsa_mall_mirror_tc_entry *mirror) { + int offset = P_MIRROR_CTRL; u8 data; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; if (mirror->ingress) { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_RX, false); dev->mirror_rx &= ~BIT(port); } else { - ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + ksz_port_cfg(dev, port, offset, PORT_MIRROR_TX, false); dev->mirror_tx &= ~BIT(port); } - ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + ksz_pread8(dev, port, offset, &data); if (!dev->mirror_rx && !dev->mirror_tx) - ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + ksz_port_cfg(dev, mirror->to_local_port, offset, PORT_MIRROR_SNIFFER, false); } @@ -1625,26 +1659,24 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) const u16 *regs = dev->info->regs; struct dsa_switch *ds = dev->ds; const u32 *masks; - int queues; + int offset; u8 member; masks = dev->info->masks; /* enable broadcast storm limit */ - ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); - - /* For KSZ88x3 enable only one queue by default, otherwise we won't - * be able to get rid of PCP prios on Port 2. - */ - if (ksz_is_ksz88x3(dev)) - queues = 1; - else - queues = dev->info->num_tx_queues; + offset = P_BCAST_STORM_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR1; + ksz_port_cfg(dev, port, offset, PORT_BROADCAST_STORM, true); - ksz8_port_queue_split(dev, port, queues); + ksz8_port_queue_split(dev, port, dev->info->num_tx_queues); /* replace priority */ - ksz_port_cfg(dev, port, P_802_1P_CTRL, + offset = P_802_1P_CTRL; + if (ksz_is_ksz8463(dev)) + offset = P1CR2; + ksz_port_cfg(dev, port, offset, masks[PORT_802_1P_REMAPPING], false); if (cpu_port) @@ -1684,6 +1716,7 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) const u32 *masks; const u16 *regs; u8 remote; + u8 fiber_ports = 0; int i; masks = dev->info->masks; @@ -1714,6 +1747,32 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) else ksz_port_cfg(dev, i, regs[P_STP_CTRL], PORT_FORCE_FLOW_CTRL, false); + if (p->fiber) + fiber_ports |= (1 << i); + } + if (ksz_is_ksz8463(dev)) { + /* Setup fiber ports. */ + if (fiber_ports) { + fiber_ports &= 3; + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_CFG_CTRL, + fiber_ports << PORT_COPPER_MODE_S, + 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_REG_DSP_CTRL_6, + COPPER_RECEIVE_ADJUSTMENT, 0); + } + + /* Turn off PTP function as the switch's proprietary way of + * handling timestamp is not supported in current Linux PTP + * stack implementation. + */ + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_MSG_CONF1, + PTP_ENABLE, 0); + regmap_update_bits(ksz_regmap_16(dev), + KSZ8463_PTP_CLK_CTRL, + PTP_CLK_ENABLE, 0); } } @@ -1895,22 +1954,25 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); - if (!ksz_is_ksz88x3(dev)) + if (!ksz_is_ksz88x3(dev) && !ksz_is_ksz8463(dev)) ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true); for (i = 0; i < (dev->info->num_vlans / 4); i++) @@ -1956,6 +2018,84 @@ u32 ksz8_get_port_addr(int port, int offset) return PORT_CTRL_ADDR(port, offset); } +u32 ksz8463_get_port_addr(int port, int offset) +{ + return offset + 0x18 * port; +} + +static u16 ksz8463_get_phy_addr(u16 phy, u16 reg, u16 offset) +{ + return offset + reg * 2 + phy * (P2MBCR - P1MBCR); +} + +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u16 sw_reg = 0; + u16 data = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + switch (reg) { + case MII_PHYSID1: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1IHR); + break; + case MII_PHYSID2: + sw_reg = ksz8463_get_phy_addr(phy, 0, PHY1ILR); + break; + case MII_BMCR: + case MII_BMSR: + case MII_ADVERTISE: + case MII_LPA: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + case MII_TPISTATUS: + /* This register holds the PHY interrupt status for simulated + * Micrel KSZ PHY. + */ + data = 0x0505; + break; + default: + break; + } + if (sw_reg) { + ret = ksz_read16(dev, sw_reg, &data); + if (ret) + return ret; + } + *val = data; + + return 0; +} + +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u16 sw_reg = 0; + int ret; + + if (phy > 1) + return -ENOSPC; + + /* No write to fiber port. */ + if (dev->ports[phy].fiber) + return 0; + switch (reg) { + case MII_BMCR: + case MII_ADVERTISE: + sw_reg = ksz8463_get_phy_addr(phy, reg, P1MBCR); + break; + default: + break; + } + if (sw_reg) { + ret = ksz_write16(dev, sw_reg, val); + if (ret) + return ret; + } + + return 0; +} + int ksz8_switch_init(struct ksz_device *dev) { dev->cpu_port = fls(dev->info->cpu_ports) - 1; diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h index e1c79ff97123..0f2cd1474b44 100644 --- a/drivers/net/dsa/microchip/ksz8.h +++ b/drivers/net/dsa/microchip/ksz8.h @@ -63,4 +63,8 @@ void ksz8_phylink_mac_link_up(struct phylink_config *config, bool tx_pause, bool rx_pause); int ksz8_all_queues_split(struct ksz_device *dev, int queues); +u32 ksz8463_get_port_addr(int port, int offset); +int ksz8463_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); +int ksz8463_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val); + #endif diff --git a/drivers/net/dsa/microchip/ksz8_reg.h b/drivers/net/dsa/microchip/ksz8_reg.h index 329688603a58..332408567b47 100644 --- a/drivers/net/dsa/microchip/ksz8_reg.h +++ b/drivers/net/dsa/microchip/ksz8_reg.h @@ -729,6 +729,55 @@ #define PHY_POWER_SAVING_ENABLE BIT(2) #define PHY_REMOTE_LOOPBACK BIT(1) +/* KSZ8463 specific registers. */ +#define P1MBCR 0x4C +#define P1MBSR 0x4E +#define PHY1ILR 0x50 +#define PHY1IHR 0x52 +#define P1ANAR 0x54 +#define P1ANLPR 0x56 +#define P2MBCR 0x58 +#define P2MBSR 0x5A +#define PHY2ILR 0x5C +#define PHY2IHR 0x5E +#define P2ANAR 0x60 +#define P2ANLPR 0x62 + +#define P1CR1 0x6C +#define P1CR2 0x6E +#define P1CR3 0x72 +#define P1CR4 0x7E +#define P1SR 0x80 + +#define KSZ8463_FLUSH_TABLE_CTRL 0xAD + +#define KSZ8463_FLUSH_DYN_MAC_TABLE BIT(2) +#define KSZ8463_FLUSH_STA_MAC_TABLE BIT(1) + +#define KSZ8463_REG_SW_CTRL_9 0xAE + +#define KSZ8463_REG_CFG_CTRL 0xD8 + +#define PORT_2_COPPER_MODE BIT(7) +#define PORT_1_COPPER_MODE BIT(6) +#define PORT_COPPER_MODE_S 6 + +#define KSZ8463_REG_SW_RESET 0x126 + +#define KSZ8463_GLOBAL_SOFTWARE_RESET BIT(0) + +#define KSZ8463_PTP_CLK_CTRL 0x600 + +#define PTP_CLK_ENABLE BIT(1) + +#define KSZ8463_PTP_MSG_CONF1 0x620 + +#define PTP_ENABLE BIT(6) + +#define KSZ8463_REG_DSP_CTRL_6 0x734 + +#define COPPER_RECEIVE_ADJUSTMENT BIT(13) + /* Chip resource */ #define PRIO_QUEUES 4 @@ -784,7 +833,9 @@ #define KSZ8795_MIB_TOTAL_TX_1 0x105 #define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100 -#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105 +#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x103 + +#define KSZ8895_MIB_PACKET_DROPPED_RX_0 0x105 #define MIB_PACKET_DROPPED 0x0000FFFF diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index d16817e0476f..5facffbb9c9a 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/kernel.h> @@ -161,6 +161,190 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 10, 1000); } +static void port_sgmii_s(struct ksz_device *dev, uint port, u16 devid, u16 reg) +{ + u32 data; + + data = (devid & MII_MMD_CTRL_DEVAD_MASK) << 16; + data |= reg; + ksz_pwrite32(dev, port, REG_PORT_SGMII_ADDR__4, data); +} + +static void port_sgmii_r(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 *buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pread16(dev, port, REG_PORT_SGMII_DATA__4 + 2, buf); +} + +static void port_sgmii_w(struct ksz_device *dev, uint port, u16 devid, u16 reg, + u16 buf) +{ + port_sgmii_s(dev, port, devid, reg); + ksz_pwrite32(dev, port, REG_PORT_SGMII_DATA__4, buf); +} + +static int ksz9477_pcs_read(struct mii_bus *bus, int phy, int mmd, int reg) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + u16 val; + + port_sgmii_r(dev, port, mmd, reg, &val); + + /* Simulate a value to activate special code in the XPCS driver if + * supported. + */ + if (mmd == MDIO_MMD_PMAPMD) { + if (reg == MDIO_DEVID1) + val = 0x9477; + else if (reg == MDIO_DEVID2) + val = 0x22 << 10; + } else if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + /* Need to update MII_BMCR register with the exact speed and + * duplex mode when running in SGMII mode and this register is + * used to detect connected speed in that mode. + */ + if (reg == MMD_SR_MII_AUTO_NEG_STATUS) { + int duplex, speed; + + if (val & SR_MII_STAT_LINK_UP) { + speed = (val >> SR_MII_STAT_S) & SR_MII_STAT_M; + if (speed == SR_MII_STAT_1000_MBPS) + speed = SPEED_1000; + else if (speed == SR_MII_STAT_100_MBPS) + speed = SPEED_100; + else + speed = SPEED_10; + + if (val & SR_MII_STAT_FULL_DUPLEX) + duplex = DUPLEX_FULL; + else + duplex = DUPLEX_HALF; + + if (!p->phydev.link || + p->phydev.speed != speed || + p->phydev.duplex != duplex) { + u16 ctrl; + + p->phydev.link = 1; + p->phydev.speed = speed; + p->phydev.duplex = duplex; + port_sgmii_r(dev, port, mmd, MII_BMCR, + &ctrl); + ctrl &= BMCR_ANENABLE; + ctrl |= mii_bmcr_encode_fixed(speed, + duplex); + port_sgmii_w(dev, port, mmd, MII_BMCR, + ctrl); + } + } else { + p->phydev.link = 0; + } + } else if (reg == MII_BMSR) { + p->phydev.link = !!(val & BMSR_LSTATUS); + } + } + + return val; +} + +static int ksz9477_pcs_write(struct mii_bus *bus, int phy, int mmd, int reg, + u16 val) +{ + struct ksz_device *dev = bus->priv; + int port = ksz_get_sgmii_port(dev); + + if (mmd == MDIO_MMD_VEND2) { + struct ksz_port *p = &dev->ports[port]; + + if (reg == MMD_SR_MII_AUTO_NEG_CTRL) { + u16 sgmii_mode = SR_MII_PCS_SGMII << SR_MII_PCS_MODE_S; + + /* Need these bits for 1000BASE-X mode to work with + * AN on. + */ + if (!(val & sgmii_mode)) + val |= SR_MII_SGMII_LINK_UP | + SR_MII_TX_CFG_PHY_MASTER; + + /* SGMII interrupt in the port cannot be masked, so + * make sure interrupt is not enabled as it is not + * handled. + */ + val &= ~SR_MII_AUTO_NEG_COMPLETE_INTR; + } else if (reg == MII_BMCR) { + /* The MII_ADVERTISE register needs to write once + * before doing auto-negotiation for the correct + * config_word to be sent out after reset. + */ + if ((val & BMCR_ANENABLE) && !p->sgmii_adv_write) { + u16 adv; + + /* The SGMII port cannot disable flow control + * so it is better to just advertise symmetric + * pause. + */ + port_sgmii_r(dev, port, mmd, MII_ADVERTISE, + &adv); + adv |= ADVERTISE_1000XPAUSE; + adv &= ~ADVERTISE_1000XPSE_ASYM; + port_sgmii_w(dev, port, mmd, MII_ADVERTISE, + adv); + p->sgmii_adv_write = 1; + } else if (val & BMCR_RESET) { + p->sgmii_adv_write = 0; + } + } else if (reg == MII_ADVERTISE) { + /* XPCS driver writes to this register so there is no + * need to update it for the errata. + */ + p->sgmii_adv_write = 1; + } + } + port_sgmii_w(dev, port, mmd, reg, val); + + return 0; +} + +int ksz9477_pcs_create(struct ksz_device *dev) +{ + /* This chip has a SGMII port. */ + if (ksz_has_sgmii_port(dev)) { + int port = ksz_get_sgmii_port(dev); + struct ksz_port *p = &dev->ports[port]; + struct phylink_pcs *pcs; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc(dev->dev); + if (!bus) + return -ENOMEM; + + bus->name = "ksz_pcs_mdio_bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs", + dev_name(dev->dev)); + bus->read_c45 = &ksz9477_pcs_read; + bus->write_c45 = &ksz9477_pcs_write; + bus->parent = dev->dev; + bus->phy_mask = ~0; + bus->priv = dev; + + ret = devm_mdiobus_register(dev->dev, bus); + if (ret) + return ret; + + pcs = xpcs_create_pcs_mdiodev(bus, 0); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); + p->pcs = pcs; + } + + return 0; +} + int ksz9477_reset_switch(struct ksz_device *dev) { u8 data8; @@ -978,31 +1162,64 @@ void ksz9477_get_caps(struct ksz_device *dev, int port, if (dev->info->gbit_capable[port]) config->mac_capabilities |= MAC_1000FD; + + if (ksz_is_sgmii_port(dev, port)) { + struct ksz_port *p = &dev->ports[port]; + + phy_interface_or(config->supported_interfaces, + config->supported_interfaces, + p->pcs->supported_interfaces); + } } int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { u32 secs = msecs / 1000; - u8 value; - u8 data; + u8 data, mult, value; + u32 max_val; int ret; - value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); +#define MAX_TIMER_VAL ((1 << 8) - 1) - ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); - if (ret < 0) - return ret; + /* The aging timer comprises a 3-bit multiplier and an 8-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 255 = 1785 seconds. + */ + if (!secs) + secs = 1; - data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); if (ret < 0) return ret; - value &= ~SW_AGE_CNT_M; - value |= FIELD_PREP(SW_AGE_CNT_M, data); + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } + + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + if (ret < 0) + return ret; + } - return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); + value = DIV_ROUND_UP(secs, data); + return ksz_write8(dev, REG_SW_LUE_CTRL_3, value); } void ksz9477_port_queue_split(struct ksz_device *dev, int port) @@ -1138,9 +1355,15 @@ void ksz9477_config_cpu_port(struct dsa_switch *ds) } } +#define RESV_MCAST_CNT 8 + +static u8 reserved_mcast_map[RESV_MCAST_CNT] = { 0, 1, 3, 16, 32, 33, 2, 17 }; + int ksz9477_enable_stp_addr(struct ksz_device *dev) { + u8 i, ports, update; const u32 *masks; + bool override; u32 data; int ret; @@ -1149,23 +1372,87 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev) /* Enable Reserved multicast table */ ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); - /* Set the Override bit for forwarding BPDU packet to CPU */ - ret = ksz_write32(dev, REG_SW_ALU_VAL_B, - ALU_V_OVERRIDE | BIT(dev->cpu_port)); - if (ret < 0) - return ret; + /* The reserved multicast address table has 8 entries. Each entry has + * a default value of which port to forward. It is assumed the host + * port is the last port in most of the switches, but that is not the + * case for KSZ9477 or maybe KSZ9897. For LAN937X family the default + * port is port 5, the first RGMII port. It is okay for LAN9370, a + * 5-port switch, but may not be correct for the other 8-port + * versions. It is necessary to update the whole table to forward to + * the right ports. + * Furthermore PTP messages can use a reserved multicast address and + * the host will not receive them if this table is not correct. + */ + for (i = 0; i < RESV_MCAST_CNT; i++) { + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_READ]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; - data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; - ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); - if (ret < 0) - return ret; + ret = ksz_read32(dev, REG_SW_ALU_VAL_B, &data); + if (ret < 0) + return ret; - /* wait to be finished */ - ret = ksz9477_wait_alu_sta_ready(dev); - if (ret < 0) { - dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); - return ret; + override = false; + ports = data & dev->port_mask; + switch (i) { + case 0: + case 6: + /* Change the host port. */ + update = BIT(dev->cpu_port); + override = true; + break; + case 2: + /* Change the host port. */ + update = BIT(dev->cpu_port); + break; + case 4: + case 5: + case 7: + /* Skip the host port. */ + update = dev->port_mask & ~BIT(dev->cpu_port); + break; + default: + update = ports; + break; + } + if (update != ports || override) { + data &= ~dev->port_mask; + data |= update; + /* Set Override bit to receive frame even when port is + * closed. + */ + if (override) + data |= ALU_V_OVERRIDE; + ret = ksz_write32(dev, REG_SW_ALU_VAL_B, data); + if (ret < 0) + return ret; + + data = reserved_mcast_map[i] << + dev->info->shifts[ALU_STAT_INDEX]; + data |= ALU_STAT_START | + masks[ALU_STAT_DIRECT] | + masks[ALU_RESV_MCAST_ADDR] | + masks[ALU_STAT_WRITE]; + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) + return ret; + } } return 0; diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h index d2166b0d881e..0d1a6dfda23e 100644 --- a/drivers/net/dsa/microchip/ksz9477.h +++ b/drivers/net/dsa/microchip/ksz9477.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 series Header file * - * Copyright (C) 2017-2022 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_H @@ -97,4 +97,6 @@ void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port, u16 ethtype, u8 *src_mac, u8 *dst_mac, unsigned long cookie, u32 prio); +int ksz9477_pcs_create(struct ksz_device *dev); + #endif diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 1c6d7fc16772..a2beb27459f1 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -127,10 +127,14 @@ static const struct of_device_id ksz9477_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, ksz9477_dt_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_i2c_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct i2c_driver ksz9477_i2c_driver = { .driver = { .name = "ksz9477-switch", .of_match_table = ksz9477_dt_ids, + .pm = &ksz_i2c_pm_ops, }, .probe = ksz9477_i2c_probe, .remove = ksz9477_i2c_remove, diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index 04235c22bf40..61ea11e3338e 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -2,7 +2,7 @@ /* * Microchip KSZ9477 register definitions * - * Copyright (C) 2017-2018 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ9477_REGS_H @@ -165,8 +165,6 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) #define SW_AGE_CNT_M GENMASK(5, 3) -#define SW_AGE_CNT_S 3 -#define SW_AGE_PERIOD_10_8_M GENMASK(10, 8) #define SW_RESV_MCAST_ENABLE BIT(2) #define SW_HASH_OPTION_M 0x03 #define SW_HASH_OPTION_CRC 1 @@ -399,7 +397,6 @@ #define ALU_RESV_MCAST_INDEX_M (BIT(6) - 1) #define ALU_STAT_START BIT(7) -#define ALU_RESV_MCAST_ADDR BIT(1) #define REG_SW_ALU_VAL_A 0x0420 diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 920443ee8ffd..0c10351fe5eb 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #include <linux/delay.h> @@ -23,6 +23,7 @@ #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/micrel_phy.h> +#include <linux/pinctrl/consumer.h> #include <net/dsa.h> #include <net/ieee8021q.h> #include <net/pkt_cls.h> @@ -265,16 +266,102 @@ static void ksz_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface); +/** + * ksz_phylink_mac_disable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * + * This function is a dummy handler. See ksz_phylink_mac_enable_tx_lpi() for + * a detailed explanation of EEE/LPI handling in KSZ switches. + */ +static void ksz_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ +} + +/** + * ksz_phylink_mac_enable_tx_lpi() - Callback to signal LPI support (Dummy) + * @config: phylink config structure + * @timer: timer value before entering LPI (unused) + * @tx_clock_stop: whether to stop the TX clock in LPI mode (unused) + * + * This function signals to phylink that the driver architecture supports + * LPI management, enabling phylink to control EEE advertisement during + * negotiation according to IEEE Std 802.3 (Clause 78). + * + * Hardware Management of EEE/LPI State: + * For KSZ switch ports with integrated PHYs (e.g., KSZ9893R ports 1-2), + * observation and testing suggest that the actual EEE / Low Power Idle (LPI) + * state transitions are managed autonomously by the hardware based on + * the auto-negotiation results. (Note: While the datasheet describes EEE + * operation based on negotiation, it doesn't explicitly detail the internal + * MAC/PHY interaction, so autonomous hardware management of the MAC state + * for LPI is inferred from observed behavior). + * This hardware control, consistent with the switch's ability to operate + * autonomously via strapping, means MAC-level software intervention is not + * required or exposed for managing the LPI state once EEE is negotiated. + * (Ref: KSZ9893R Data Sheet DS00002420D, primarily Section 4.7.5 explaining + * EEE, also Sections 4.1.7 on Auto-Negotiation and 3.2.1 on Configuration + * Straps). + * + * Additionally, ports configured as MAC interfaces (e.g., KSZ9893R port 3) + * lack documented MAC-level LPI control. + * + * Therefore, this callback performs no action and serves primarily to inform + * phylink of LPI awareness and to document the inferred hardware behavior. + * + * Returns: 0 (Always success) + */ +static int ksz_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + return 0; +} + static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { .mac_config = ksz88x3_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct phylink_mac_ops ksz8_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, +}; + +static const struct ksz_dev_ops ksz8463_dev_ops = { + .setup = ksz8_setup, + .get_port_addr = ksz8463_get_port_addr, + .cfg_port_member = ksz8_cfg_port_member, + .flush_dyn_mac_table = ksz8_flush_dyn_mac_table, + .port_setup = ksz8_port_setup, + .r_phy = ksz8463_r_phy, + .w_phy = ksz8463_w_phy, + .r_mib_cnt = ksz8_r_mib_cnt, + .r_mib_pkt = ksz8_r_mib_pkt, + .r_mib_stat64 = ksz88xx_r_mib_stats64, + .freeze_mib = ksz8_freeze_mib, + .port_init_cnt = ksz8_port_init_cnt, + .fdb_dump = ksz8_fdb_dump, + .fdb_add = ksz8_fdb_add, + .fdb_del = ksz8_fdb_del, + .mdb_add = ksz8_mdb_add, + .mdb_del = ksz8_mdb_del, + .vlan_filtering = ksz8_port_vlan_filtering, + .vlan_add = ksz8_port_vlan_add, + .vlan_del = ksz8_port_vlan_del, + .mirror_add = ksz8_port_mirror_add, + .mirror_del = ksz8_port_mirror_del, + .get_caps = ksz8_get_caps, + .config_cpu_port = ksz8_config_cpu_port, + .enable_stp_addr = ksz8_enable_stp_addr, + .reset = ksz8_reset_switch, + .init = ksz8_switch_init, + .exit = ksz8_switch_exit, + .change_mtu = ksz8_change_mtu, }; static const struct ksz_dev_ops ksz88xx_dev_ops = { @@ -354,10 +441,29 @@ static void ksz9477_phylink_mac_link_up(struct phylink_config *config, int speed, int duplex, bool tx_pause, bool rx_pause); +static struct phylink_pcs * +ksz_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct ksz_device *dev = dp->ds->priv; + struct ksz_port *p = &dev->ports[dp->index]; + + if (ksz_is_sgmii_port(dev, dp->index) && + (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_1000BASEX)) + return p->pcs; + + return NULL; +} + static const struct phylink_mac_ops ksz9477_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, + .mac_select_pcs = ksz_phylink_mac_select_pcs, }; static const struct ksz_dev_ops ksz9477_dev_ops = { @@ -395,12 +501,15 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .reset = ksz9477_reset_switch, .init = ksz9477_switch_init, .exit = ksz9477_switch_exit, + .pcs_create = ksz9477_pcs_create, }; static const struct phylink_mac_ops lan937x_phylink_mac_ops = { .mac_config = ksz_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz9477_phylink_mac_link_up, + .mac_disable_tx_lpi = ksz_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = ksz_phylink_mac_enable_tx_lpi, }; static const struct ksz_dev_ops lan937x_dev_ops = { @@ -441,6 +550,60 @@ static const struct ksz_dev_ops lan937x_dev_ops = { .exit = lan937x_switch_exit, }; +static const u16 ksz8463_regs[] = { + [REG_SW_MAC_ADDR] = 0x10, + [REG_IND_CTRL_0] = 0x30, + [REG_IND_DATA_8] = 0x26, + [REG_IND_DATA_CHECK] = 0x26, + [REG_IND_DATA_HI] = 0x28, + [REG_IND_DATA_LO] = 0x2C, + [REG_IND_MIB_CHECK] = 0x2F, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x0F, + [S_TAIL_TAG_CTRL] = 0xAD, + [P_STP_CTRL] = 0x6F, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8463_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(3), + [SW_TAIL_TAG_ENABLE] = BIT(0), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(15, 12), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16), + [VLAN_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_VALID] = BIT(19), + [STATIC_MAC_TABLE_USE_FID] = BIT(21), + [STATIC_MAC_TABLE_FID] = GENMASK(25, 22), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(20), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22), +}; + +static u8 ksz8463_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 16, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 22, + [DYNAMIC_MAC_ENTRIES_H] = 8, + [DYNAMIC_MAC_ENTRIES] = 24, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 22, + [DYNAMIC_MAC_SRC_PORT] = 20, +}; + static const u16 ksz8795_regs[] = { [REG_SW_MAC_ADDR] = 0x68, [REG_IND_CTRL_0] = 0x6E, @@ -645,6 +808,8 @@ static const u16 ksz9477_regs[] = { static const u32 ksz9477_masks[] = { [ALU_STAT_WRITE] = 0, [ALU_STAT_READ] = 1, + [ALU_STAT_DIRECT] = 0, + [ALU_RESV_MCAST_ADDR] = BIT(1), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -672,6 +837,8 @@ static const u8 ksz9477_xmii_ctrl1[] = { static const u32 lan937x_masks[] = { [ALU_STAT_WRITE] = 1, [ALU_STAT_READ] = 2, + [ALU_STAT_DIRECT] = BIT(3), + [ALU_RESV_MCAST_ADDR] = BIT(2), [P_MII_TX_FLOW_CTRL] = BIT(5), [P_MII_RX_FLOW_CTRL] = BIT(3), }; @@ -1035,8 +1202,7 @@ static const struct regmap_range ksz9477_valid_regs[] = { regmap_reg_range(0x701b, 0x701b), regmap_reg_range(0x701f, 0x7020), regmap_reg_range(0x7030, 0x7030), - regmap_reg_range(0x7200, 0x7203), - regmap_reg_range(0x7206, 0x7207), + regmap_reg_range(0x7200, 0x7207), regmap_reg_range(0x7300, 0x7301), regmap_reg_range(0x7400, 0x7401), regmap_reg_range(0x7403, 0x7403), @@ -1100,10 +1266,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x1030, 0x1030), regmap_reg_range(0x1100, 0x1115), regmap_reg_range(0x111a, 0x111f), - regmap_reg_range(0x1122, 0x1127), - regmap_reg_range(0x112a, 0x112b), - regmap_reg_range(0x1136, 0x1139), - regmap_reg_range(0x113e, 0x113f), + regmap_reg_range(0x1120, 0x112b), + regmap_reg_range(0x1134, 0x113b), + regmap_reg_range(0x113c, 0x113f), regmap_reg_range(0x1400, 0x1401), regmap_reg_range(0x1403, 0x1403), regmap_reg_range(0x1410, 0x1417), @@ -1130,10 +1295,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x2030, 0x2030), regmap_reg_range(0x2100, 0x2115), regmap_reg_range(0x211a, 0x211f), - regmap_reg_range(0x2122, 0x2127), - regmap_reg_range(0x212a, 0x212b), - regmap_reg_range(0x2136, 0x2139), - regmap_reg_range(0x213e, 0x213f), + regmap_reg_range(0x2120, 0x212b), + regmap_reg_range(0x2134, 0x213b), + regmap_reg_range(0x213c, 0x213f), regmap_reg_range(0x2400, 0x2401), regmap_reg_range(0x2403, 0x2403), regmap_reg_range(0x2410, 0x2417), @@ -1160,10 +1324,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x3030, 0x3030), regmap_reg_range(0x3100, 0x3115), regmap_reg_range(0x311a, 0x311f), - regmap_reg_range(0x3122, 0x3127), - regmap_reg_range(0x312a, 0x312b), - regmap_reg_range(0x3136, 0x3139), - regmap_reg_range(0x313e, 0x313f), + regmap_reg_range(0x3120, 0x312b), + regmap_reg_range(0x3134, 0x313b), + regmap_reg_range(0x313c, 0x313f), regmap_reg_range(0x3400, 0x3401), regmap_reg_range(0x3403, 0x3403), regmap_reg_range(0x3410, 0x3417), @@ -1190,10 +1353,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x4030, 0x4030), regmap_reg_range(0x4100, 0x4115), regmap_reg_range(0x411a, 0x411f), - regmap_reg_range(0x4122, 0x4127), - regmap_reg_range(0x412a, 0x412b), - regmap_reg_range(0x4136, 0x4139), - regmap_reg_range(0x413e, 0x413f), + regmap_reg_range(0x4120, 0x412b), + regmap_reg_range(0x4134, 0x413b), + regmap_reg_range(0x413c, 0x413f), regmap_reg_range(0x4400, 0x4401), regmap_reg_range(0x4403, 0x4403), regmap_reg_range(0x4410, 0x4417), @@ -1220,10 +1382,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x5030, 0x5030), regmap_reg_range(0x5100, 0x5115), regmap_reg_range(0x511a, 0x511f), - regmap_reg_range(0x5122, 0x5127), - regmap_reg_range(0x512a, 0x512b), - regmap_reg_range(0x5136, 0x5139), - regmap_reg_range(0x513e, 0x513f), + regmap_reg_range(0x5120, 0x512b), + regmap_reg_range(0x5134, 0x513b), + regmap_reg_range(0x513c, 0x513f), regmap_reg_range(0x5400, 0x5401), regmap_reg_range(0x5403, 0x5403), regmap_reg_range(0x5410, 0x5417), @@ -1250,10 +1411,9 @@ static const struct regmap_range ksz9896_valid_regs[] = { regmap_reg_range(0x6030, 0x6030), regmap_reg_range(0x6100, 0x6115), regmap_reg_range(0x611a, 0x611f), - regmap_reg_range(0x6122, 0x6127), - regmap_reg_range(0x612a, 0x612b), - regmap_reg_range(0x6136, 0x6139), - regmap_reg_range(0x613e, 0x613f), + regmap_reg_range(0x6120, 0x612b), + regmap_reg_range(0x6134, 0x613b), + regmap_reg_range(0x613c, 0x613f), regmap_reg_range(0x6300, 0x6301), regmap_reg_range(0x6400, 0x6401), regmap_reg_range(0x6403, 0x6403), @@ -1292,6 +1452,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), @@ -1318,6 +1479,29 @@ static const struct regmap_access_table ksz8873_register_set = { }; const struct ksz_chip_data ksz_switch_chips[] = { + [KSZ8463] = { + .chip_id = KSZ8463_CHIP_ID, + .dev_name = "KSZ8463", + .num_vlans = 16, + .num_alus = 0, + .num_statics = 8, + .cpu_ports = 0x4, /* can be configured as cpu port */ + .port_cnt = 3, + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz8463_dev_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8463_regs, + .masks = ksz8463_masks, + .shifts = ksz8463_shifts, + .supports_mii = {false, false, true}, + .supports_rmii = {false, false, true}, + .internal_phy = {true, true, false}, + }, + [KSZ8563] = { .chip_id = KSZ8563_CHIP_ID, .dev_name = "KSZ8563", @@ -1345,6 +1529,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {false, false, true}, + .ptp_capable = true, .wr_table = &ksz8563_register_set, .rd_table = &ksz8563_register_set, }, @@ -1556,6 +1741,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -1683,6 +1870,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rgmii = {false, false, true}, .internal_phy = {true, true, false}, .gbit_capable = {true, true, true}, + .ptp_capable = true, }, [KSZ8567] = { @@ -1718,6 +1906,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, false, false}, .gbit_capable = {false, false, false, false, false, true, true}, + .ptp_capable = true, }, [KSZ9567] = { @@ -1750,6 +1939,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .ptp_capable = true, }, [LAN9370] = { @@ -1779,6 +1969,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true}, .supports_rgmii = {false, false, false, false, true}, .internal_phy = {true, true, true, true, false}, + .ptp_capable = true, }, [LAN9371] = { @@ -1808,6 +1999,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .supports_rmii = {false, false, false, false, true, true}, .supports_rgmii = {false, false, false, false, true, true}, .internal_phy = {true, true, true, true, false, false}, + .ptp_capable = true, }, [LAN9372] = { @@ -1841,6 +2033,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, }, [LAN9373] = { @@ -1874,6 +2067,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, false, false, false, true, true}, + .ptp_capable = true, }, [LAN9374] = { @@ -1907,6 +2101,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { true, true, false, false}, .internal_phy = {true, true, true, true, false, false, true, true}, + .ptp_capable = true, }, [LAN9646] = { @@ -1940,6 +2135,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, true, false, false}, .gbit_capable = {true, true, true, true, true, true, true}, + .sgmii_port = 7, .wr_table = &ksz9477_register_set, .rd_table = &ksz9477_register_set, }, @@ -2012,6 +2208,18 @@ static void ksz_phylink_get_caps(struct dsa_switch *ds, int port, if (dev->dev_ops->get_caps) dev->dev_ops->get_caps(dev, port, config); + + if (ds->ops->support_eee && ds->ops->support_eee(ds, port)) { + memcpy(config->lpi_interfaces, config->supported_interfaces, + sizeof(config->lpi_interfaces)); + + config->lpi_capabilities = MAC_100FD; + if (dev->info->gbit_capable[port]) + config->lpi_capabilities |= MAC_1000FD; + + /* EEE is fully operational */ + config->eee_enabled_default = true; + } } void ksz_r_mib_stats64(struct ksz_device *dev, int port) @@ -2063,7 +2271,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port) spin_unlock(&mib->stats64_lock); - if (dev->info->phy_errata_9477) { + if (dev->info->phy_errata_9477 && !ksz_is_sgmii_port(dev, port)) { ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col); if (ret) dev_err(dev->dev, "Failed to monitor transmission halt\n"); @@ -2254,6 +2462,12 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); } + /* HSR ports are setup once so need to use the assigned membership + * when the port is enabled. + */ + if (!port_member && p->stp_state == BR_STATE_FORWARDING && + (dev->hsr_ports & BIT(port))) + port_member = dev->hsr_ports; dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); } @@ -2373,8 +2587,8 @@ static int ksz_irq_phy_setup(struct ksz_device *dev) irq = irq_find_mapping(dev->ports[port].pirq.domain, PORT_SRC_PHY_INT); - if (irq < 0) { - ret = irq; + if (!irq) { + ret = -EINVAL; goto out; } ds->user_mii_bus->irq[phy] = irq; @@ -2550,7 +2764,11 @@ static int ksz_mdio_register(struct ksz_device *dev) bus->read = ksz_sw_mdio_read; bus->write = ksz_sw_mdio_write; bus->name = "ksz user smi"; - snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + if (ds->dst->index != 0) { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d-%d", ds->dst->index, ds->index); + } else { + snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index); + } } ret = ksz_parse_dt_phy_config(dev, bus, mdio_np); @@ -2689,8 +2907,8 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq) kirq->dev = dev; kirq->masked = ~0; - kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0, - &ksz_irq_domain_ops, kirq); + kirq->domain = irq_domain_create_simple(dev_fwnode(dev->dev), kirq->nirqs, 0, + &ksz_irq_domain_ops, kirq); if (!kirq->domain) return -ENOMEM; @@ -2734,8 +2952,8 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p) snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p); pirq->irq_num = irq_find_mapping(dev->girq.domain, p); - if (pirq->irq_num < 0) - return pirq->irq_num; + if (!pirq->irq_num) + return -EINVAL; return ksz_irq_common_setup(dev, pirq); } @@ -2745,6 +2963,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev); static int ksz_setup(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; + u16 storm_mask, storm_rate; struct dsa_port *dp; struct ksz_port *p; const u16 *regs; @@ -2767,11 +2986,21 @@ static int ksz_setup(struct dsa_switch *ds) if (ret) return ret; + if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) { + ret = dev->dev_ops->pcs_create(dev); + if (ret) + return ret; + } + /* set broadcast storm protection 10% rate */ + storm_mask = BROADCAST_STORM_RATE; + storm_rate = (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; + if (ksz_is_ksz8463(dev)) { + storm_mask = swab16(storm_mask); + storm_rate = swab16(storm_rate); + } regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL], - BROADCAST_STORM_RATE, - (BROADCAST_STORM_VALUE * - BROADCAST_STORM_PROT_RATE) / 100); + storm_mask, storm_rate); dev->dev_ops->config_cpu_port(ds); @@ -2809,18 +3038,23 @@ static int ksz_setup(struct dsa_switch *ds) dsa_switch_for_each_user_port(dp, dev->ds) { ret = ksz_pirq_setup(dev, dp->index); if (ret) - goto out_girq; + goto port_release; - ret = ksz_ptp_irq_setup(ds, dp->index); - if (ret) - goto out_pirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_irq_setup(ds, dp->index); + if (ret) + goto pirq_release; + } } } - ret = ksz_ptp_clock_register(ds); - if (ret) { - dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret); - goto out_ptpirq; + if (dev->info->ptp_capable) { + ret = ksz_ptp_clock_register(ds); + if (ret) { + dev_err(dev->dev, "Failed to register PTP clock: %d\n", + ret); + goto port_release; + } } ret = ksz_mdio_register(dev); @@ -2840,18 +3074,18 @@ static int ksz_setup(struct dsa_switch *ds) return 0; out_ptp_clock_unregister: - ksz_ptp_clock_unregister(ds); -out_ptpirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) - ksz_ptp_irq_free(ds, dp->index); -out_pirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); +port_release: + if (dev->irq > 0) { + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); +pirq_release: ksz_irq_free(&dev->ports[dp->index].pirq); -out_girq: - if (dev->irq > 0) + } ksz_irq_free(&dev->girq); + } return ret; } @@ -2861,11 +3095,13 @@ static void ksz_teardown(struct dsa_switch *ds) struct ksz_device *dev = ds->priv; struct dsa_port *dp; - ksz_ptp_clock_unregister(ds); + if (dev->info->ptp_capable) + ksz_ptp_clock_unregister(ds); if (dev->irq > 0) { dsa_switch_for_each_user_port(dp, dev->ds) { - ksz_ptp_irq_free(ds, dp->index); + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); ksz_irq_free(&dev->ports[dp->index].pirq); } @@ -2992,31 +3228,6 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) if (!port) return MICREL_KSZ8_P1_ERRATA; break; - case KSZ8567_CHIP_ID: - /* KSZ8567R Errata DS80000752C Module 4 */ - case KSZ8765_CHIP_ID: - case KSZ8794_CHIP_ID: - case KSZ8795_CHIP_ID: - /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ - case KSZ9477_CHIP_ID: - /* KSZ9477S Errata DS80000754A Module 4 */ - case KSZ9567_CHIP_ID: - /* KSZ9567S Errata DS80000756A Module 4 */ - case KSZ9896_CHIP_ID: - /* KSZ9896C Errata DS80000757A Module 3 */ - case KSZ9897_CHIP_ID: - case LAN9646_CHIP_ID: - /* KSZ9897R Errata DS80000758C Module 4 */ - /* Energy Efficient Ethernet (EEE) feature select must be manually disabled - * The EEE feature is enabled by default, but it is not fully - * operational. It must be manually disabled through register - * controls. If not disabled, the PHY ports can auto-negotiate - * to enable EEE, and this feature can cause link drops when - * linked to another device supporting EEE. - * - * The same item appears in the errata for all switches above. - */ - return MICREL_NO_EEE; } return 0; @@ -3314,6 +3525,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, proto = DSA_TAG_PROTO_KSZ8795; if (dev->chip_id == KSZ88X3_CHIP_ID || + dev->chip_id == KSZ8463_CHIP_ID || dev->chip_id == KSZ8563_CHIP_ID || dev->chip_id == KSZ9893_CHIP_ID || dev->chip_id == KSZ9563_CHIP_ID) @@ -3426,6 +3638,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; + case KSZ8463_CHIP_ID: case KSZ88X3_CHIP_ID: case KSZ8864_CHIP_ID: case KSZ8895_CHIP_ID: @@ -3450,58 +3663,67 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) return -EOPNOTSUPP; } -static int ksz_validate_eee(struct dsa_switch *ds, int port) +/** + * ksz_support_eee - Determine Energy Efficient Ethernet (EEE) support for a + * port + * @ds: Pointer to the DSA switch structure + * @port: Port number to check + * + * This function also documents devices where EEE was initially advertised but + * later withdrawn due to reliability issues, as described in official errata + * documents. These devices are explicitly listed to record known limitations, + * even if there is no technical necessity for runtime checks. + * + * Returns: true if the internal PHY on the given port supports fully + * operational EEE, false otherwise. + */ +static bool ksz_support_eee(struct dsa_switch *ds, int port) { struct ksz_device *dev = ds->priv; if (!dev->info->internal_phy[port]) - return -EOPNOTSUPP; + return false; switch (dev->chip_id) { case KSZ8563_CHIP_ID: + case KSZ9563_CHIP_ID: + case KSZ9893_CHIP_ID: + return true; case KSZ8567_CHIP_ID: + /* KSZ8567R Errata DS80000752C Module 4 */ + case KSZ8765_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8795_CHIP_ID: + /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */ case KSZ9477_CHIP_ID: - case KSZ9563_CHIP_ID: + /* KSZ9477S Errata DS80000754A Module 4 */ case KSZ9567_CHIP_ID: - case KSZ9893_CHIP_ID: + /* KSZ9567S Errata DS80000756A Module 4 */ case KSZ9896_CHIP_ID: + /* KSZ9896C Errata DS80000757A Module 3 */ case KSZ9897_CHIP_ID: case LAN9646_CHIP_ID: - return 0; + /* KSZ9897R Errata DS80000758C Module 4 */ + /* Energy Efficient Ethernet (EEE) feature select must be + * manually disabled + * The EEE feature is enabled by default, but it is not fully + * operational. It must be manually disabled through register + * controls. If not disabled, the PHY ports can auto-negotiate + * to enable EEE, and this feature can cause link drops when + * linked to another device supporting EEE. + * + * The same item appears in the errata for all switches above. + */ + break; } - return -EOPNOTSUPP; -} - -static int ksz_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_keee *e) -{ - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; - - /* There is no documented control of Tx LPI configuration. */ - e->tx_lpi_enabled = true; - - /* There is no documented control of Tx LPI timer. According to tests - * Tx LPI timer seems to be set by default to minimal value. - */ - e->tx_lpi_timer = 0; - - return 0; + return false; } static int ksz_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { struct ksz_device *dev = ds->priv; - int ret; - - ret = ksz_validate_eee(ds, port); - if (ret) - return ret; if (!e->tx_lpi_enabled) { dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n"); @@ -3622,6 +3844,10 @@ static void ksz_phylink_mac_config(struct phylink_config *config, if (dev->info->internal_phy[port]) return; + /* No need to configure XMII control register when using SGMII. */ + if (ksz_is_sgmii_port(dev, port)) + return; + if (phylink_autoneg_inband(mode)) { dev_err(dev->dev, "In-band AN not supported!\n"); return; @@ -3767,6 +3993,9 @@ static int ksz_switch_detect(struct ksz_device *dev) id2 = FIELD_GET(SW_CHIP_ID_M, id16); switch (id1) { + case KSZ84_FAMILY_ID: + dev->chip_id = KSZ8463_CHIP_ID; + break; case KSZ87_FAMILY_ID: if (id2 == KSZ87_CHIP_ID_95) { u8 val; @@ -4008,6 +4237,104 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p, return p->bands - 1 - band; } +static u8 ksz8463_tc_ctrl(int port, int queue) +{ + u8 reg; + + reg = 0xC8 + port * 4; + reg += ((3 - queue) / 2) * 2; + reg++; + reg -= (queue & 1); + return reg; +} + +/** + * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection) + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to configure + * @p: Pointer to offload replace parameters describing ETS bands and mapping + * + * The KSZ88x3 supports two scheduling modes: Strict Priority and + * Weighted Fair Queuing (WFQ). Both modes have fixed behavior: + * - No configurable queue-to-priority mapping + * - No weight adjustment in WFQ mode + * + * This function configures the switch to use strict priority mode by + * clearing the WFQ enable bit for all queues associated with ETS bands. + * If strict priority is not explicitly requested, the switch will default + * to WFQ mode. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port, + struct tc_ets_qopt_offload_replace_params *p) +{ + int ret, band; + + /* Only strict priority mode is supported for now. + * WFQ is implicitly enabled when strict mode is disabled. + */ + for (band = 0; band < p->bands; band++) { + int queue = ksz_ets_band_to_queue(p, band); + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Clear WFQ enable bit to select strict priority scheduling */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0); + if (ret) + return ret; + } + + return 0; +} + +/** + * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config + * for a port on KSZ88x3 switch + * @dev: Pointer to the KSZ switch device structure + * @port: Port number to reset + * + * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or + * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or + * queue mapping. This function resets the port’s scheduling mode to + * the default, which is WFQ, by enabling the WFQ bit for all queues. + * + * Return: 0 on success, or a negative error code on failure + */ +static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port) +{ + int ret, queue; + + /* Iterate over all transmit queues for this port */ + for (queue = 0; queue < dev->info->num_tx_queues; queue++) { + u8 reg; + + /* Calculate TXQ Split Control register address for this + * port/queue + */ + reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue); + if (ksz_is_ksz8463(dev)) + reg = ksz8463_tc_ctrl(port, queue); + + /* Set WFQ enable bit to revert back to default scheduling + * mode + */ + ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, + KSZ8873_TXQ_WFQ_ENABLE); + if (ret) + return ret; + } + + return 0; +} + static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue) { int ret; @@ -4089,6 +4416,7 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port) for (queue = 0; queue < dev->info->num_tx_queues; queue++) { ret = ksz_queue_set_wrr(dev, port, queue, KSZ9477_DEFAULT_WRR_WEIGHT); + if (ret) return ret; } @@ -4141,7 +4469,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; int ret; - if (is_ksz8(dev)) + if (is_ksz8(dev) && !(ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev))) return -EOPNOTSUPP; if (qopt->parent != TC_H_ROOT) { @@ -4155,9 +4483,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port, if (ret) return ret; - return ksz_tc_ets_add(dev, port, &qopt->replace_params); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_add(dev, port, + &qopt->replace_params); + else + return ksz_tc_ets_add(dev, port, &qopt->replace_params); case TC_ETS_DESTROY: - return ksz_tc_ets_del(dev, port); + if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) + return ksz88x3_tc_ets_del(dev, port); + else + return ksz_tc_ets_del(dev, port); case TC_ETS_STATS: case TC_ETS_GRAFT: return -EOPNOTSUPP; @@ -4497,7 +4832,16 @@ int ksz_switch_macaddr_get(struct dsa_switch *ds, int port, /* Program the switch MAC address to hardware */ for (i = 0; i < ETH_ALEN; i++) { - ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]); + if (ksz_is_ksz8463(dev)) { + u16 addr16 = ((u16)addr[i] << 8) | addr[i + 1]; + + ret = ksz_write16(dev, regs[REG_SW_MAC_ADDR] + i, + addr16); + i++; + } else { + ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, + addr[i]); + } if (ret) goto macaddr_drop; } @@ -4599,6 +4943,23 @@ static int ksz_hsr_leave(struct dsa_switch *ds, int port, return 0; } +static int ksz_suspend(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + cancel_delayed_work_sync(&dev->mib_read); + return 0; +} + +static int ksz_resume(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + + if (dev->mib_read_interval) + schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); + return 0; +} + static const struct dsa_switch_ops ksz_switch_ops = { .get_tag_protocol = ksz_get_tag_protocol, .connect_tag_protocol = ksz_connect_tag_protocol, @@ -4639,6 +5000,8 @@ static const struct dsa_switch_ops ksz_switch_ops = { .port_max_mtu = ksz_max_mtu, .get_wol = ksz_get_wol, .set_wol = ksz_set_wol, + .suspend = ksz_suspend, + .resume = ksz_resume, .get_ts_info = ksz_get_ts_info, .port_hwtstamp_get = ksz_hwtstamp_get, .port_hwtstamp_set = ksz_hwtstamp_set, @@ -4647,7 +5010,7 @@ static const struct dsa_switch_ops ksz_switch_ops = { .cls_flower_add = ksz_cls_flower_add, .cls_flower_del = ksz_cls_flower_del, .port_setup_tc = ksz_setup_tc, - .get_mac_eee = ksz_get_mac_eee, + .support_eee = ksz_support_eee, .set_mac_eee = ksz_set_mac_eee, .port_get_default_prio = ksz_port_get_default_prio, .port_set_default_prio = ksz_port_set_default_prio, @@ -4986,6 +5349,38 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) return 0; } +static int ksz8463_configure_straps_spi(struct ksz_device *dev) +{ + struct pinctrl *pinctrl; + struct gpio_desc *rxd0; + struct gpio_desc *rxd1; + + rxd0 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 0, GPIOD_OUT_LOW); + if (IS_ERR(rxd0)) + return PTR_ERR(rxd0); + + rxd1 = devm_gpiod_get_index_optional(dev->dev, "straps-rxd", 1, GPIOD_OUT_HIGH); + if (IS_ERR(rxd1)) + return PTR_ERR(rxd1); + + if (!rxd0 && !rxd1) + return 0; + + if ((rxd0 && !rxd1) || (rxd1 && !rxd0)) + return -EINVAL; + + pinctrl = devm_pinctrl_get_select(dev->dev, "reset"); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + + return 0; +} + +static int ksz8463_release_straps_spi(struct ksz_device *dev) +{ + return pinctrl_select_default_state(dev->dev); +} + int ksz_switch_register(struct ksz_device *dev) { const struct ksz_chip_data *info; @@ -5001,10 +5396,22 @@ int ksz_switch_register(struct ksz_device *dev) return PTR_ERR(dev->reset_gpio); if (dev->reset_gpio) { + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_configure_straps_spi(dev); + if (ret) + return ret; + } + gpiod_set_value_cansleep(dev->reset_gpio, 1); usleep_range(10000, 12000); gpiod_set_value_cansleep(dev->reset_gpio, 0); msleep(100); + + if (of_device_is_compatible(dev->dev->of_node, "microchip,ksz8463")) { + ret = ksz8463_release_straps_spi(dev); + if (ret) + return ret; + } } mutex_init(&dev->dev_mutex); @@ -5087,6 +5494,9 @@ int ksz_switch_register(struct ksz_device *dev) &dev->ports[port_num].interface); ksz_parse_rgmii_delay(dev, port_num, port); + dev->ports[port_num].fiber = + of_property_read_bool(port, + "micrel,fiber-mode"); } of_node_put(ports); } @@ -5138,6 +5548,24 @@ void ksz_switch_remove(struct ksz_device *dev) } EXPORT_SYMBOL(ksz_switch_remove); +#ifdef CONFIG_PM_SLEEP +int ksz_switch_suspend(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_suspend(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_suspend); + +int ksz_switch_resume(struct device *dev) +{ + struct ksz_device *priv = dev_get_drvdata(dev); + + return dsa_switch_resume(priv->ds); +} +EXPORT_SYMBOL(ksz_switch_resume); +#endif + MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index b3bb75ca0796..c65188cd3c0a 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip switch driver common header * - * Copyright (C) 2017-2024 Microchip Technology Inc. + * Copyright (C) 2017-2025 Microchip Technology Inc. */ #ifndef __KSZ_COMMON_H @@ -10,6 +10,7 @@ #include <linux/etherdevice.h> #include <linux/kernel.h> #include <linux/mutex.h> +#include <linux/pcs/pcs-xpcs.h> #include <linux/phy.h> #include <linux/regmap.h> #include <net/dsa.h> @@ -92,6 +93,8 @@ struct ksz_chip_data { bool supports_rgmii[KSZ_MAX_NUM_PORTS]; bool internal_phy[KSZ_MAX_NUM_PORTS]; bool gbit_capable[KSZ_MAX_NUM_PORTS]; + bool ptp_capable; + u8 sgmii_port; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; }; @@ -131,6 +134,7 @@ struct ksz_port { u32 force:1; u32 read:1; /* read MIB counters in background */ u32 freeze:1; /* MIB counter freeze is enabled */ + u32 sgmii_adv_write:1; struct ksz_port_mib mib; phy_interface_t interface; @@ -140,8 +144,9 @@ struct ksz_port { void *acl_priv; struct ksz_irq pirq; u8 num; + struct phylink_pcs *pcs; #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP) - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; bool hwts_tx_en; bool hwts_rx_en; struct ksz_irq ptpirq; @@ -217,6 +222,7 @@ struct ksz_device { /* List of supported models */ enum ksz_model { + KSZ8463, KSZ8563, KSZ8567, KSZ8795, @@ -288,6 +294,8 @@ enum ksz_masks { DYNAMIC_MAC_TABLE_TIMESTAMP, ALU_STAT_WRITE, ALU_STAT_READ, + ALU_STAT_DIRECT, + ALU_RESV_MCAST_ADDR, P_MII_TX_FLOW_CTRL, P_MII_RX_FLOW_CTRL, }; @@ -439,11 +447,15 @@ struct ksz_dev_ops { int (*reset)(struct ksz_device *dev); int (*init)(struct ksz_device *dev); void (*exit)(struct ksz_device *dev); + + int (*pcs_create)(struct ksz_device *dev); }; struct ksz_device *ksz_switch_alloc(struct device *base, void *priv); int ksz_switch_register(struct ksz_device *dev); void ksz_switch_remove(struct ksz_device *dev); +int ksz_switch_suspend(struct device *dev); +int ksz_switch_resume(struct device *dev); void ksz_init_mib_timer(struct ksz_device *dev); bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port); @@ -475,6 +487,11 @@ static inline struct regmap *ksz_regmap_32(struct ksz_device *dev) return dev->regmap[KSZ_REGMAP_32]; } +static inline bool ksz_is_ksz8463(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8463_CHIP_ID; +} + static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val) { unsigned int value; @@ -700,12 +717,13 @@ static inline bool ksz_is_8895_family(struct ksz_device *dev) static inline bool is_ksz8(struct ksz_device *dev) { return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev) || - ksz_is_8895_family(dev); + ksz_is_8895_family(dev) || ksz_is_ksz8463(dev); } static inline bool is_ksz88xx(struct ksz_device *dev) { - return ksz_is_ksz88x3(dev) || ksz_is_8895_family(dev); + return ksz_is_ksz88x3(dev) || ksz_is_8895_family(dev) || + ksz_is_ksz8463(dev); } static inline bool is_ksz9477(struct ksz_device *dev) @@ -728,6 +746,21 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) dev->chip_id == LAN9372_CHIP_ID) && port == KSZ_PORT_4; } +static inline int ksz_get_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port - 1; +} + +static inline bool ksz_has_sgmii_port(struct ksz_device *dev) +{ + return dev->info->sgmii_port > 0; +} + +static inline bool ksz_is_sgmii_port(struct ksz_device *dev, int port) +{ + return dev->info->sgmii_port == port + 1; +} + /* STP State Defines */ #define PORT_TX_ENABLE BIT(2) #define PORT_RX_ENABLE BIT(1) @@ -737,6 +770,7 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define REG_CHIP_ID0 0x00 #define SW_FAMILY_ID_M GENMASK(15, 8) +#define KSZ84_FAMILY_ID 0x84 #define KSZ87_FAMILY_ID 0x87 #define KSZ88_FAMILY_ID 0x88 #define KSZ8895_FAMILY_ID 0x95 @@ -833,6 +867,25 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define SW_HI_SPEED_DRIVE_STRENGTH_S 4 #define SW_LO_SPEED_DRIVE_STRENGTH_S 0 +/* TXQ Split Control Register for per-port, per-queue configuration. + * Register 0xAF is TXQ Split for Q3 on Port 1. + * Register offset formula: 0xAF + (port * 4) + (3 - queue) + * where: port = 0..2, queue = 0..3 + */ +#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \ + (0xAF + ((port) * 4) + (3 - (queue))) + +/* Bit 7 selects between: + * 0 = Strict priority mode (highest-priority queue first) + * 1 = Weighted Fair Queuing (WFQ) mode: + * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1 + * If any queues are empty, weight is redistributed. + * + * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873 + * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs. + */ +#define KSZ8873_TXQ_WFQ_ENABLE BIT(7) + #define KSZ9477_REG_PORT_OUT_RATE_0 0x0420 #define KSZ9477_OUT_RATE_NO_LIMIT 0 @@ -896,4 +949,29 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) [KSZ_REGMAP_32] = KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \ } +#define KSZ8463_REGMAP_ENTRY(width, regbits, regpad, regalign) \ + { \ + .name = #width, \ + .val_bits = (width), \ + .reg_stride = (width / 8), \ + .reg_bits = (regbits) + (regalign), \ + .pad_bits = (regpad), \ + .read = ksz8463_spi_read, \ + .write = ksz8463_spi_write, \ + .max_register = BIT(regbits) - 1, \ + .cache_type = REGCACHE_NONE, \ + .zero_flag_mask = 1, \ + .use_single_read = 1, \ + .use_single_write = 1, \ + .lock = ksz_regmap_lock, \ + .unlock = ksz_regmap_unlock, \ + } + +#define KSZ8463_REGMAP_TABLE(ksz, regbits, regpad, regalign) \ + static const struct regmap_config ksz##_regmap_config[] = { \ + [KSZ_REGMAP_8] = KSZ8463_REGMAP_ENTRY(8, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_16] = KSZ8463_REGMAP_ENTRY(16, (regbits), (regpad), (regalign)), \ + [KSZ_REGMAP_32] = KSZ8463_REGMAP_ENTRY(32, (regbits), (regpad), (regalign)), \ + } + #endif diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c index 30b4a6186e38..7131c5caac54 100644 --- a/drivers/net/dsa/microchip/ksz_dcb.c +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -10,11 +10,18 @@ #include "ksz_dcb.h" #include "ksz8.h" -#define KSZ8_REG_PORT_1_CTRL_0 0x10 +/* Port X Control 0 register. + * The datasheet specifies: Port 1 - 0x10, Port 2 - 0x20, Port 3 - 0x30. + * However, the driver uses get_port_addr(), which maps Port 1 to offset 0. + * Therefore, we define the base offset as 0x00 here to align with that logic. + */ +#define KSZ8_REG_PORT_1_CTRL_0 0x00 +#define KSZ8463_REG_PORT_1_CTRL_0 0x6C #define KSZ8_PORT_DIFFSERV_ENABLE BIT(6) #define KSZ8_PORT_802_1P_ENABLE BIT(5) #define KSZ8_PORT_BASED_PRIO_M GENMASK(4, 3) +#define KSZ8463_REG_TOS_DSCP_CTRL 0x16 #define KSZ88X3_REG_TOS_DSCP_CTRL 0x60 #define KSZ8765_REG_TOS_DSCP_CTRL 0x90 @@ -93,6 +100,8 @@ static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, *reg = KSZ8_REG_PORT_1_CTRL_0; *mask = KSZ8_PORT_BASED_PRIO_M; *shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; } else { *reg = KSZ9477_REG_PORT_MRI_MAC_CTRL; *mask = KSZ9477_PORT_BASED_PRIO_M; @@ -117,10 +126,12 @@ static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg, *reg = KSZ8765_REG_TOS_DSCP_CTRL; *per_reg = 4; *mask = GENMASK(1, 0); - } else if (ksz_is_ksz88x3(dev)) { + } else if (ksz_is_ksz88x3(dev) || ksz_is_ksz8463(dev)) { *reg = KSZ88X3_REG_TOS_DSCP_CTRL; *per_reg = 4; *mask = GENMASK(1, 0); + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_TOS_DSCP_CTRL; } else { *reg = KSZ9477_REG_DIFFSERV_PRIO_MAP; *per_reg = 2; @@ -146,6 +157,8 @@ static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev, *map = ksz8_apptrust_map_to_bit; *reg = KSZ8_REG_PORT_1_CTRL_0; *mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE; + if (ksz_is_ksz8463(dev)) + *reg = KSZ8463_REG_PORT_1_CTRL_0; } else { *map = ksz9477_apptrust_map_to_bit; *reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL; @@ -182,49 +195,6 @@ int ksz_port_get_default_prio(struct dsa_switch *ds, int port) } /** - * ksz88x3_port_set_default_prio_quirks - Quirks for default priority - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the default priority - * @prio: Priority value to set - * - * This function implements quirks for setting the default priority on KSZ88x3 - * devices. On Port 2, no other priority providers are working - * except of PCP. So, configuring default priority on Port 2 is not possible. - * On Port 1, it is not possible to configure port priority if PCP - * apptrust on Port 2 is disabled. Since we disable multiple queues on the - * switch to disable PCP on Port 2, we need to ensure that the default priority - * configuration on Port 1 is in agreement with the configuration on Port 2. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port, - u8 prio) -{ - if (!prio) - return 0; - - if (port == KSZ_PORT_2) { - dev_err(dev->dev, "Port priority configuration is not working on Port 2\n"); - return -EINVAL; - } else if (port == KSZ_PORT_1) { - u8 port2_data; - int ret; - - ret = ksz_pread8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0, - &port2_data); - if (ret) - return ret; - - if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) { - dev_err(dev->dev, "Not possible to configure port priority on Port 1 if PCP apptrust on Port 2 is disabled\n"); - return -EINVAL; - } - } - - return 0; -} - -/** * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ * switch * @ds: Pointer to the DSA switch structure @@ -239,18 +209,12 @@ static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio) { struct ksz_device *dev = ds->priv; - int reg, shift, ret; + int reg, shift; u8 mask; if (prio >= dev->info->num_ipms) return -EINVAL; - if (ksz_is_ksz88x3(dev)) { - ret = ksz88x3_port_set_default_prio_quirks(dev, port, prio); - if (ret) - return ret; - } - ksz_get_default_port_prio_reg(dev, ®, &mask, &shift); return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask); @@ -519,155 +483,6 @@ err_sel_not_vaild: } /** - * ksz88x3_port1_apptrust_quirk - Quirk for apptrust configuration on Port 1 - * of KSZ88x3 devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @port1_data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on Port 1 of - * KSZ88x3 devices. It ensures that apptrust configuration on Port 1 is not - * possible if PCP apptrust on Port 2 is disabled. This is because the Port 2 - * seems to be permanently hardwired to PCP classification, so we need to - * do Port 1 configuration always in agreement with Port 2 configuration. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port1_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 port1_data) -{ - u8 port2_data; - int ret; - - /* If no apptrust is requested for Port 1, no need to care about Port 2 - * configuration. - */ - if (!(port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE))) - return 0; - - /* We got request to enable any apptrust on Port 1. To make it possible, - * we need to enable multiple queues on the switch. If we enable - * multiqueue support, PCP classification on Port 2 will be - * automatically activated by HW. - */ - ret = ksz_pread8(dev, KSZ_PORT_2, reg, &port2_data); - if (ret) - return ret; - - /* If KSZ8_PORT_802_1P_ENABLE bit is set on Port 2, the driver showed - * the interest in PCP classification on Port 2. In this case, - * multiqueue support is enabled and we can enable any apptrust on - * Port 1. - * If KSZ8_PORT_802_1P_ENABLE bit is not set on Port 2, the PCP - * classification on Port 2 is still active, but the driver disabled - * multiqueue support and made frame prioritization inactive for - * all ports. In this case, we can't enable any apptrust on Port 1. - */ - if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) { - dev_err(dev->dev, "Not possible to enable any apptrust on Port 1 if PCP apptrust on Port 2 is disabled\n"); - return -EINVAL; - } - - return 0; -} - -/** - * ksz88x3_port2_apptrust_quirk - Quirk for apptrust configuration on Port 2 - * of KSZ88x3 devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @port2_data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on Port 2 of - * KSZ88x3 devices. It ensures that DSCP apptrust is not working on Port 2 and - * that it is not possible to disable PCP on Port 2. The only way to disable PCP - * on Port 2 is to disable multiple queues on the switch. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port2_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 port2_data) -{ - struct dsa_switch *ds = dev->ds; - u8 port1_data; - int ret; - - /* First validate Port 2 configuration. DiffServ/DSCP is not working - * on this port. - */ - if (port2_data & KSZ8_PORT_DIFFSERV_ENABLE) { - dev_err(dev->dev, "DSCP apptrust is not working on Port 2\n"); - return -EINVAL; - } - - /* If PCP support is requested, we need to enable all queues on the - * switch to make PCP priority working on Port 2. - */ - if (port2_data & KSZ8_PORT_802_1P_ENABLE) - return ksz8_all_queues_split(dev, dev->info->num_tx_queues); - - /* We got request to disable PCP priority on Port 2. - * Now, we need to compare Port 2 configuration with Port 1 - * configuration. - */ - ret = ksz_pread8(dev, KSZ_PORT_1, reg, &port1_data); - if (ret) - return ret; - - /* If Port 1 has any apptrust enabled, we can't disable multiple queues - * on the switch, so we can't disable PCP on Port 2. - */ - if (port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)) { - dev_err(dev->dev, "Not possible to disable PCP on Port 2 if any apptrust is enabled on Port 1\n"); - return -EINVAL; - } - - /* Now we need to ensure that default priority on Port 1 is set to 0 - * otherwise we can't disable multiqueue support on the switch. - */ - ret = ksz_port_get_default_prio(ds, KSZ_PORT_1); - if (ret < 0) { - return ret; - } else if (ret) { - dev_err(dev->dev, "Not possible to disable PCP on Port 2 if non zero default priority is set on Port 1\n"); - return -EINVAL; - } - - /* Port 1 has no apptrust or default priority set and we got request to - * disable PCP on Port 2. We can disable multiqueue support to disable - * PCP on Port 2. - */ - return ksz8_all_queues_split(dev, 1); -} - -/** - * ksz88x3_port_apptrust_quirk - Quirk for apptrust configuration on KSZ88x3 - * devices - * @dev: Pointer to the KSZ switch device structure - * @port: Port number for which to set the apptrust selectors - * @reg: Register address for the apptrust configuration - * @data: Data to set for the apptrust configuration - * - * This function implements a quirk for apptrust configuration on KSZ88x3 - * devices. It ensures that apptrust configuration on Port 1 and - * Port 2 is done in agreement with each other. - * - * Return: 0 on success, or a negative error code on failure - */ -static int ksz88x3_port_apptrust_quirk(struct ksz_device *dev, int port, - int reg, u8 data) -{ - if (port == KSZ_PORT_1) - return ksz88x3_port1_apptrust_quirk(dev, port, reg, data); - else if (port == KSZ_PORT_2) - return ksz88x3_port2_apptrust_quirk(dev, port, reg, data); - - return 0; -} - -/** * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ * switch * @ds: Pointer to the DSA switch structure @@ -707,12 +522,6 @@ int ksz_port_set_apptrust(struct dsa_switch *ds, int port, } } - if (ksz_is_ksz88x3(dev)) { - ret = ksz88x3_port_apptrust_quirk(dev, port, reg, data); - if (ret) - return ret; - } - return ksz_prmw8(dev, port, reg, mask, data); } @@ -799,21 +608,5 @@ int ksz_dcb_init_port(struct ksz_device *dev, int port) */ int ksz_dcb_init(struct ksz_device *dev) { - int ret; - - ret = ksz_init_global_dscp_map(dev); - if (ret) - return ret; - - /* Enable 802.1p priority control on Port 2 during switch initialization. - * This setup is critical for the apptrust functionality on Port 1, which - * relies on the priority settings of Port 2. Note: Port 1 is naturally - * configured before Port 2, necessitating this configuration order. - */ - if (ksz_is_ksz88x3(dev)) - return ksz_prmw8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0, - KSZ8_PORT_802_1P_ENABLE, - KSZ8_PORT_802_1P_ENABLE); - - return 0; + return ksz_init_global_dscp_map(dev); } diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index 22fb9ef4645c..997e4a76d0a6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -319,22 +319,21 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_in return 0; } -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config *config; struct ksz_port *prt; prt = &dev->ports[port]; - config = &prt->tstamp_config; + *config = prt->tstamp_config; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + return 0; } static int ksz_set_hwtstamp_config(struct ksz_device *dev, struct ksz_port *prt, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { int ret; @@ -404,26 +403,21 @@ static int ksz_set_hwtstamp_config(struct ksz_device *dev, return ksz_ptp_enable_mode(dev); } -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ksz_device *dev = ds->priv; - struct hwtstamp_config config; struct ksz_port *prt; int ret; prt = &dev->ports[port]; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - ret = ksz_set_hwtstamp_config(dev, prt, &config); + ret = ksz_set_hwtstamp_config(dev, prt, config); if (ret) return ret; - memcpy(&prt->tstamp_config, &config, sizeof(config)); - - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + prt->tstamp_config = *config; return 0; } @@ -1099,19 +1093,19 @@ static int ksz_ptp_msg_irq_setup(struct ksz_port *port, u8 n) static const char * const name[] = {"pdresp-msg", "xdreq-msg", "sync-msg"}; const struct ksz_dev_ops *ops = port->ksz_dev->dev_ops; + struct ksz_irq *ptpirq = &port->ptpirq; struct ksz_ptp_irq *ptpmsg_irq; ptpmsg_irq = &port->ptpmsg_irq[n]; + ptpmsg_irq->num = irq_create_mapping(ptpirq->domain, n); + if (!ptpmsg_irq->num) + return -EINVAL; ptpmsg_irq->port = port; ptpmsg_irq->ts_reg = ops->get_port_addr(port->num, ts_reg[n]); strscpy(ptpmsg_irq->name, name[n]); - ptpmsg_irq->num = irq_find_mapping(port->ptpirq.domain, n); - if (ptpmsg_irq->num < 0) - return ptpmsg_irq->num; - return request_threaded_irq(ptpmsg_irq->num, NULL, ksz_ptp_msg_thread_fn, IRQF_ONESHOT, ptpmsg_irq->name, ptpmsg_irq); @@ -1136,17 +1130,14 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) init_completion(&port->tstamp_msg_comp); - ptpirq->domain = irq_domain_add_linear(dev->dev->of_node, ptpirq->nirqs, - &ksz_ptp_irq_domain_ops, ptpirq); + ptpirq->domain = irq_domain_create_linear(dev_fwnode(dev->dev), ptpirq->nirqs, + &ksz_ptp_irq_domain_ops, ptpirq); if (!ptpirq->domain) return -ENOMEM; - for (irq = 0; irq < ptpirq->nirqs; irq++) - irq_create_mapping(ptpirq->domain, irq); - ptpirq->irq_num = irq_find_mapping(port->pirq.domain, PORT_SRC_PTP_INT); - if (ptpirq->irq_num < 0) { - ret = ptpirq->irq_num; + if (!ptpirq->irq_num) { + ret = -EINVAL; goto out; } @@ -1165,12 +1156,11 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) out_ptp_msg: free_irq(ptpirq->irq_num, ptpirq); - while (irq--) + while (irq--) { free_irq(port->ptpmsg_irq[irq].num, &port->ptpmsg_irq[irq]); -out: - for (irq = 0; irq < ptpirq->nirqs; irq++) irq_dispose_mapping(port->ptpmsg_irq[irq].num); - + } +out: irq_domain_remove(ptpirq->domain); return ret; diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h index 2f1783c0d723..3086e519b1b6 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.h +++ b/drivers/net/dsa/microchip/ksz_ptp.h @@ -39,8 +39,11 @@ void ksz_ptp_clock_unregister(struct dsa_switch *ds); int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_info *ts); -int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); -int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); +int ksz_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); +int ksz_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); void ksz_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); void ksz_port_deferred_xmit(struct kthread_work *work); bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb, diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 108a958dc356..d8001734b057 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -16,6 +16,10 @@ #include "ksz_common.h" +#define KSZ8463_SPI_ADDR_SHIFT 13 +#define KSZ8463_SPI_ADDR_ALIGN 3 +#define KSZ8463_SPI_TURNAROUND_SHIFT 2 + #define KSZ8795_SPI_ADDR_SHIFT 12 #define KSZ8795_SPI_ADDR_ALIGN 3 #define KSZ8795_SPI_TURNAROUND_SHIFT 1 @@ -37,6 +41,99 @@ KSZ_REGMAP_TABLE(ksz8863, 16, KSZ8863_SPI_ADDR_SHIFT, KSZ_REGMAP_TABLE(ksz9477, 32, KSZ9477_SPI_ADDR_SHIFT, KSZ9477_SPI_TURNAROUND_SHIFT, KSZ9477_SPI_ADDR_ALIGN); +static u16 ksz8463_reg(u16 reg, size_t size) +{ + switch (size) { + case 1: + reg = ((reg >> 2) << 4) | (1 << (reg & 3)); + break; + case 2: + reg = ((reg >> 2) << 4) | (reg & 2 ? 0x0c : 0x03); + break; + default: + reg = ((reg >> 2) << 4) | 0xf; + break; + } + reg <<= KSZ8463_SPI_TURNAROUND_SHIFT; + return reg; +} + +static int ksz8463_spi_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 bytes[2]; + u16 cmd; + int rc; + + if (reg_size > 2 || val_size > 4) + return -EINVAL; + memcpy(&cmd, reg, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); + rc = spi_write_then_read(spi, bytes, reg_size, val, val_size); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (!rc && val_size > 1) { + if (val_size == 2) { + u16 v = get_unaligned_le16(val); + + memcpy(val, &v, sizeof(v)); + } else if (val_size == 4) { + u32 v = get_unaligned_le32(val); + + memcpy(val, &v, sizeof(v)); + } + } +#endif + return rc; +} + +static int ksz8463_spi_write(void *context, const void *data, size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + size_t val_size = count - 2; + u8 bytes[6]; + u16 cmd; + + if (count <= 2 || count > 6) + return -EINVAL; + memcpy(bytes, data, count); + memcpy(&cmd, data, sizeof(u16)); + cmd = ksz8463_reg(cmd, val_size); + cmd |= (1 << (KSZ8463_SPI_ADDR_SHIFT + KSZ8463_SPI_TURNAROUND_SHIFT)); + /* SPI command uses big-endian format. */ + put_unaligned_be16(cmd, bytes); +#if defined(__BIG_ENDIAN) + /* Register value uses little-endian format so need to convert when + * running in big-endian system. + */ + if (val_size == 2) { + u8 *val = &bytes[2]; + u16 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le16(v, val); + } else if (val_size == 4) { + u8 *val = &bytes[2]; + u32 v; + + memcpy(&v, val, sizeof(v)); + put_unaligned_le32(v, val); + } +#endif + return spi_write(spi, bytes, count); +} + +KSZ8463_REGMAP_TABLE(ksz8463, KSZ8463_SPI_ADDR_SHIFT, 0, + KSZ8463_SPI_ADDR_ALIGN); + static int ksz_spi_probe(struct spi_device *spi) { const struct regmap_config *regmap_config; @@ -58,6 +155,8 @@ static int ksz_spi_probe(struct spi_device *spi) dev->chip_id = chip->chip_id; if (chip->chip_id == KSZ88X3_CHIP_ID) regmap_config = ksz8863_regmap_config; + else if (chip->chip_id == KSZ8463_CHIP_ID) + regmap_config = ksz8463_regmap_config; else if (chip->chip_id == KSZ8795_CHIP_ID || chip->chip_id == KSZ8794_CHIP_ID || chip->chip_id == KSZ8765_CHIP_ID) @@ -126,6 +225,10 @@ static void ksz_spi_shutdown(struct spi_device *spi) static const struct of_device_id ksz_dt_ids[] = { { + .compatible = "microchip,ksz8463", + .data = &ksz_switch_chips[KSZ8463] + }, + { .compatible = "microchip,ksz8765", .data = &ksz_switch_chips[KSZ8765] }, @@ -214,6 +317,7 @@ static const struct of_device_id ksz_dt_ids[] = { MODULE_DEVICE_TABLE(of, ksz_dt_ids); static const struct spi_device_id ksz_spi_ids[] = { + { "ksz8463" }, { "ksz8765" }, { "ksz8794" }, { "ksz8795" }, @@ -239,10 +343,14 @@ static const struct spi_device_id ksz_spi_ids[] = { }; MODULE_DEVICE_TABLE(spi, ksz_spi_ids); +static DEFINE_SIMPLE_DEV_PM_OPS(ksz_spi_pm_ops, + ksz_switch_suspend, ksz_switch_resume); + static struct spi_driver ksz_spi_driver = { .driver = { .name = "ksz-switch", .of_match_table = ksz_dt_ids, + .pm = &ksz_spi_pm_ops, }, .id_table = ksz_spi_ids, .probe = ksz_spi_probe, diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c index b7652efd632e..5a1496fff445 100644 --- a/drivers/net/dsa/microchip/lan937x_main.c +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* Microchip LAN937X switch driver main logic - * Copyright (C) 2019-2022 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #include <linux/kernel.h> #include <linux/module.h> @@ -461,10 +461,66 @@ int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) { - u32 secs = msecs / 1000; - u32 value; + u8 data, mult, value8; + bool in_msec = false; + u32 max_val, value; + u32 secs = msecs; int ret; +#define MAX_TIMER_VAL ((1 << 20) - 1) + + /* The aging timer comprises a 3-bit multiplier and a 20-bit second + * value. Either of them cannot be zero. The maximum timer is then + * 7 * 1048575 = 7340025 seconds. As this value is too large for + * practical use it can be interpreted as microseconds, making the + * maximum timer 7340 seconds with finer control. This allows for + * maximum 122 minutes compared to 29 minutes in KSZ9477 switch. + */ + if (msecs % 1000) + in_msec = true; + else + secs /= 1000; + if (!secs) + secs = 1; + + /* Return error if too large. */ + else if (secs > 7 * MAX_TIMER_VAL) + return -EINVAL; + + /* Configure how to interpret the number value. */ + ret = ksz_rmw8(dev, REG_SW_LUE_CTRL_2, SW_AGE_CNT_IN_MICROSEC, + in_msec ? SW_AGE_CNT_IN_MICROSEC : 0); + if (ret < 0) + return ret; + + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value8); + if (ret < 0) + return ret; + + /* Check whether there is need to update the multiplier. */ + mult = FIELD_GET(SW_AGE_CNT_M, value8); + max_val = MAX_TIMER_VAL; + if (mult > 0) { + /* Try to use the same multiplier already in the register as + * the hardware default uses multiplier 4 and 75 seconds for + * 300 seconds. + */ + max_val = DIV_ROUND_UP(secs, mult); + if (max_val > MAX_TIMER_VAL || max_val * mult != secs) + max_val = MAX_TIMER_VAL; + } + + data = DIV_ROUND_UP(secs, max_val); + if (mult != data) { + value8 &= ~SW_AGE_CNT_M; + value8 |= FIELD_PREP(SW_AGE_CNT_M, data); + ret = ksz_write8(dev, REG_SW_LUE_CTRL_0, value8); + if (ret < 0) + return ret; + } + + secs = DIV_ROUND_UP(secs, data); + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); @@ -484,6 +540,7 @@ static void lan937x_set_tune_adj(struct ksz_device *dev, int port, ksz_pread16(dev, port, reg, &data16); /* Update tune Adjust */ + data16 &= ~PORT_TUNE_ADJ; data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); ksz_pwrite16(dev, port, reg, data16); diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h index 4ec93e421da4..72042fd64e5b 100644 --- a/drivers/net/dsa/microchip/lan937x_reg.h +++ b/drivers/net/dsa/microchip/lan937x_reg.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip LAN937X switch register definitions - * Copyright (C) 2019-2021 Microchip Technology Inc. + * Copyright (C) 2019-2024 Microchip Technology Inc. */ #ifndef __LAN937X_REG_H #define __LAN937X_REG_H @@ -56,8 +56,7 @@ #define SW_VLAN_ENABLE BIT(7) #define SW_DROP_INVALID_VID BIT(6) -#define SW_AGE_CNT_M 0x7 -#define SW_AGE_CNT_S 3 +#define SW_AGE_CNT_M GENMASK(5, 3) #define SW_RESV_MCAST_ENABLE BIT(2) #define REG_SW_LUE_CTRL_1 0x0311 @@ -70,6 +69,10 @@ #define SW_FAST_AGING BIT(1) #define SW_LINK_AUTO_AGING BIT(0) +#define REG_SW_LUE_CTRL_2 0x0312 + +#define SW_AGE_CNT_IN_MICROSEC BIT(7) + #define REG_SW_AGE_PERIOD__1 0x0313 #define SW_AGE_PERIOD_7_0_M GENMASK(7, 0) diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c index 51df42ccdbe6..0286a6cecb6f 100644 --- a/drivers/net/dsa/mt7530-mdio.c +++ b/drivers/net/dsa/mt7530-mdio.c @@ -136,10 +136,17 @@ static const struct of_device_id mt7530_of_match[] = { }; MODULE_DEVICE_TABLE(of, mt7530_of_match); +static const struct regmap_config regmap_config = { + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = MT7530_CREV, + .disable_locking = true, +}; + static int mt7530_probe(struct mdio_device *mdiodev) { - static struct regmap_config *regmap_config; struct mt7530_priv *priv; struct device_node *dn; int ret; @@ -193,18 +200,8 @@ mt7530_probe(struct mdio_device *mdiodev) return PTR_ERR(priv->io_pwr); } - regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), - GFP_KERNEL); - if (!regmap_config) - return -ENOMEM; - - regmap_config->reg_bits = 16; - regmap_config->val_bits = 32; - regmap_config->reg_stride = 4; - regmap_config->max_register = MT7530_CREV; - regmap_config->disable_locking = true; priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv, - regmap_config); + ®map_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c index 5f2db4317dd3..1dc8b93fb51a 100644 --- a/drivers/net/dsa/mt7530-mmio.c +++ b/drivers/net/dsa/mt7530-mmio.c @@ -11,16 +11,24 @@ #include "mt7530.h" static const struct of_device_id mt7988_of_match[] = { + { .compatible = "airoha,an7583-switch", .data = &mt753x_table[ID_AN7583], }, { .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], }, { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7988_of_match); +static const struct regmap_config sw_regmap_config = { + .name = "switch", + .reg_bits = 16, + .val_bits = 32, + .reg_stride = 4, + .max_register = MT7530_CREV, +}; + static int mt7988_probe(struct platform_device *pdev) { - static struct regmap_config *sw_regmap_config; struct mt7530_priv *priv; void __iomem *base_addr; int ret; @@ -48,16 +56,8 @@ mt7988_probe(struct platform_device *pdev) return -ENXIO; } - sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL); - if (!sw_regmap_config) - return -ENOMEM; - - sw_regmap_config->name = "switch"; - sw_regmap_config->reg_bits = 16; - sw_regmap_config->val_bits = 32; - sw_regmap_config->reg_stride = 4; - sw_regmap_config->max_register = MT7530_CREV; - priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config); + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, + &sw_regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 086b8b3d5b40..b9423389c2ef 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -32,47 +32,15 @@ static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs) /* String, offset, and register size in bytes if different from 4 bytes */ static const struct mt7530_mib_desc mt7530_mib[] = { - MIB_DESC(1, 0x00, "TxDrop"), - MIB_DESC(1, 0x04, "TxCrcErr"), - MIB_DESC(1, 0x08, "TxUnicast"), - MIB_DESC(1, 0x0c, "TxMulticast"), - MIB_DESC(1, 0x10, "TxBroadcast"), - MIB_DESC(1, 0x14, "TxCollision"), - MIB_DESC(1, 0x18, "TxSingleCollision"), - MIB_DESC(1, 0x1c, "TxMultipleCollision"), - MIB_DESC(1, 0x20, "TxDeferred"), - MIB_DESC(1, 0x24, "TxLateCollision"), - MIB_DESC(1, 0x28, "TxExcessiveCollistion"), - MIB_DESC(1, 0x2c, "TxPause"), - MIB_DESC(1, 0x30, "TxPktSz64"), - MIB_DESC(1, 0x34, "TxPktSz65To127"), - MIB_DESC(1, 0x38, "TxPktSz128To255"), - MIB_DESC(1, 0x3c, "TxPktSz256To511"), - MIB_DESC(1, 0x40, "TxPktSz512To1023"), - MIB_DESC(1, 0x44, "Tx1024ToMax"), - MIB_DESC(2, 0x48, "TxBytes"), - MIB_DESC(1, 0x60, "RxDrop"), - MIB_DESC(1, 0x64, "RxFiltering"), - MIB_DESC(1, 0x68, "RxUnicast"), - MIB_DESC(1, 0x6c, "RxMulticast"), - MIB_DESC(1, 0x70, "RxBroadcast"), - MIB_DESC(1, 0x74, "RxAlignErr"), - MIB_DESC(1, 0x78, "RxCrcErr"), - MIB_DESC(1, 0x7c, "RxUnderSizeErr"), - MIB_DESC(1, 0x80, "RxFragErr"), - MIB_DESC(1, 0x84, "RxOverSzErr"), - MIB_DESC(1, 0x88, "RxJabberErr"), - MIB_DESC(1, 0x8c, "RxPause"), - MIB_DESC(1, 0x90, "RxPktSz64"), - MIB_DESC(1, 0x94, "RxPktSz65To127"), - MIB_DESC(1, 0x98, "RxPktSz128To255"), - MIB_DESC(1, 0x9c, "RxPktSz256To511"), - MIB_DESC(1, 0xa0, "RxPktSz512To1023"), - MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"), - MIB_DESC(2, 0xa8, "RxBytes"), - MIB_DESC(1, 0xb0, "RxCtrlDrop"), - MIB_DESC(1, 0xb4, "RxIngressDrop"), - MIB_DESC(1, 0xb8, "RxArlDrop"), + MIB_DESC(1, MT7530_PORT_MIB_TX_DROP, "TxDrop"), + MIB_DESC(1, MT7530_PORT_MIB_TX_CRC_ERR, "TxCrcErr"), + MIB_DESC(1, MT7530_PORT_MIB_TX_COLLISION, "TxCollision"), + MIB_DESC(1, MT7530_PORT_MIB_RX_DROP, "RxDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_FILTERING, "RxFiltering"), + MIB_DESC(1, MT7530_PORT_MIB_RX_CRC_ERR, "RxCrcErr"), + MIB_DESC(1, MT7530_PORT_MIB_RX_CTRL_DROP, "RxCtrlDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_INGRESS_DROP, "RxIngressDrop"), + MIB_DESC(1, MT7530_PORT_MIB_RX_ARL_DROP, "RxArlDrop"), }; static void @@ -790,23 +758,33 @@ mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, } static void +mt7530_read_port_stats(struct mt7530_priv *priv, int port, + u32 offset, u8 size, uint64_t *data) +{ + u32 val, reg = MT7530_PORT_MIB_COUNTER(port) + offset; + + val = mt7530_read(priv, reg); + *data = val; + + if (size == 2) { + val = mt7530_read(priv, reg + 4); + *data |= (u64)val << 32; + } +} + +static void mt7530_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) { struct mt7530_priv *priv = ds->priv; const struct mt7530_mib_desc *mib; - u32 reg, i; - u64 hi; + int i; for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) { mib = &mt7530_mib[i]; - reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset; - data[i] = mt7530_read(priv, reg); - if (mib->size == 2) { - hi = mt7530_read(priv, reg + 4); - data[i] |= hi << 32; - } + mt7530_read_port_stats(priv, port, mib->offset, mib->size, + data + i); } } @@ -819,6 +797,172 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } +static void mt7530_get_eth_mac_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_mac_stats *mac_stats) +{ + struct mt7530_priv *priv = ds->priv; + + /* MIB counter doesn't provide a FramesTransmittedOK but instead + * provide stats for Unicast, Broadcast and Multicast frames separately. + * To simulate a global frame counter, read Unicast and addition Multicast + * and Broadcast later + */ + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_UNICAST, 1, + &mac_stats->FramesTransmittedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_SINGLE_COLLISION, 1, + &mac_stats->SingleCollisionFrames); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTIPLE_COLLISION, 1, + &mac_stats->MultipleCollisionFrames); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNICAST, 1, + &mac_stats->FramesReceivedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BYTES, 2, + &mac_stats->OctetsTransmittedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_ALIGN_ERR, 1, + &mac_stats->AlignmentErrors); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_DEFERRED, 1, + &mac_stats->FramesWithDeferredXmissions); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_LATE_COLLISION, 1, + &mac_stats->LateCollisions); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_EXCESSIVE_COLLISION, 1, + &mac_stats->FramesAbortedDueToXSColls); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BYTES, 2, + &mac_stats->OctetsReceivedOK); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTICAST, 1, + &mac_stats->MulticastFramesXmittedOK); + mac_stats->FramesTransmittedOK += mac_stats->MulticastFramesXmittedOK; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BROADCAST, 1, + &mac_stats->BroadcastFramesXmittedOK); + mac_stats->FramesTransmittedOK += mac_stats->BroadcastFramesXmittedOK; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_MULTICAST, 1, + &mac_stats->MulticastFramesReceivedOK); + mac_stats->FramesReceivedOK += mac_stats->MulticastFramesReceivedOK; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BROADCAST, 1, + &mac_stats->BroadcastFramesReceivedOK); + mac_stats->FramesReceivedOK += mac_stats->BroadcastFramesReceivedOK; +} + +static const struct ethtool_rmon_hist_range mt7530_rmon_ranges[] = { + { 0, 64 }, + { 65, 127 }, + { 128, 255 }, + { 256, 511 }, + { 512, 1023 }, + { 1024, MT7530_MAX_MTU }, + {} +}; + +static void mt7530_get_rmon_stats(struct dsa_switch *ds, int port, + struct ethtool_rmon_stats *rmon_stats, + const struct ethtool_rmon_hist_range **ranges) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNDER_SIZE_ERR, 1, + &rmon_stats->undersize_pkts); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_OVER_SZ_ERR, 1, + &rmon_stats->oversize_pkts); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_FRAG_ERR, 1, + &rmon_stats->fragments); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_JABBER_ERR, 1, + &rmon_stats->jabbers); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_64, 1, + &rmon_stats->hist[0]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_65_TO_127, 1, + &rmon_stats->hist[1]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_128_TO_255, 1, + &rmon_stats->hist[2]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_256_TO_511, 1, + &rmon_stats->hist[3]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_512_TO_1023, 1, + &rmon_stats->hist[4]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PKT_SZ_1024_TO_MAX, 1, + &rmon_stats->hist[5]); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_64, 1, + &rmon_stats->hist_tx[0]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_65_TO_127, 1, + &rmon_stats->hist_tx[1]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_128_TO_255, 1, + &rmon_stats->hist_tx[2]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_256_TO_511, 1, + &rmon_stats->hist_tx[3]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_512_TO_1023, 1, + &rmon_stats->hist_tx[4]); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PKT_SZ_1024_TO_MAX, 1, + &rmon_stats->hist_tx[5]); + + *ranges = mt7530_rmon_ranges; +} + +static void mt7530_get_stats64(struct dsa_switch *ds, int port, + struct rtnl_link_stats64 *storage) +{ + struct mt7530_priv *priv = ds->priv; + uint64_t data; + + /* MIB counter doesn't provide a FramesTransmittedOK but instead + * provide stats for Unicast, Broadcast and Multicast frames separately. + * To simulate a global frame counter, read Unicast and addition Multicast + * and Broadcast later + */ + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_UNICAST, 1, + &storage->rx_packets); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_MULTICAST, 1, + &storage->multicast); + storage->rx_packets += storage->multicast; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BROADCAST, 1, + &data); + storage->rx_packets += data; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_UNICAST, 1, + &storage->tx_packets); + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_MULTICAST, 1, + &data); + storage->tx_packets += data; + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BROADCAST, 1, + &data); + storage->tx_packets += data; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_BYTES, 2, + &storage->rx_bytes); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_BYTES, 2, + &storage->tx_bytes); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_DROP, 1, + &storage->rx_dropped); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_DROP, 1, + &storage->tx_dropped); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_CRC_ERR, 1, + &storage->rx_crc_errors); +} + +static void mt7530_get_eth_ctrl_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_ctrl_stats *ctrl_stats) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_TX_PAUSE, 1, + &ctrl_stats->MACControlFramesTransmitted); + + mt7530_read_port_stats(priv, port, MT7530_PORT_MIB_RX_PAUSE, 1, + &ctrl_stats->MACControlFramesReceived); +} + static int mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) { @@ -1154,7 +1298,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) * is affine to the inbound user port. */ if (priv->id == ID_MT7531 || priv->id == ID_MT7988 || - priv->id == ID_EN7581) + priv->id == ID_EN7581 || priv->id == ID_AN7583) mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); /* CPU port gets connected to all user ports of @@ -1968,7 +2112,7 @@ mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); } -static void +static int mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { struct mt7530_priv *priv = gpiochip_get_data(gc); @@ -1978,6 +2122,8 @@ mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); else mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); + + return 0; } static int @@ -2050,131 +2196,6 @@ mt7530_setup_gpio(struct mt7530_priv *priv) } #endif /* CONFIG_GPIOLIB */ -static irqreturn_t -mt7530_irq_thread_fn(int irq, void *dev_id) -{ - struct mt7530_priv *priv = dev_id; - bool handled = false; - u32 val; - int p; - - mt7530_mutex_lock(priv); - val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); - mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); - mt7530_mutex_unlock(priv); - - for (p = 0; p < MT7530_NUM_PHYS; p++) { - if (BIT(p) & val) { - unsigned int irq; - - irq = irq_find_mapping(priv->irq_domain, p); - handle_nested_irq(irq); - handled = true; - } - } - - return IRQ_RETVAL(handled); -} - -static void -mt7530_irq_mask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable &= ~BIT(d->hwirq); -} - -static void -mt7530_irq_unmask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable |= BIT(d->hwirq); -} - -static void -mt7530_irq_bus_lock(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - mt7530_mutex_lock(priv); -} - -static void -mt7530_irq_bus_sync_unlock(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); - mt7530_mutex_unlock(priv); -} - -static struct irq_chip mt7530_irq_chip = { - .name = KBUILD_MODNAME, - .irq_mask = mt7530_irq_mask, - .irq_unmask = mt7530_irq_unmask, - .irq_bus_lock = mt7530_irq_bus_lock, - .irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock, -}; - -static int -mt7530_irq_map(struct irq_domain *domain, unsigned int irq, - irq_hw_number_t hwirq) -{ - irq_set_chip_data(irq, domain->host_data); - irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq); - irq_set_nested_thread(irq, true); - irq_set_noprobe(irq); - - return 0; -} - -static const struct irq_domain_ops mt7530_irq_domain_ops = { - .map = mt7530_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - -static void -mt7988_irq_mask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable &= ~BIT(d->hwirq); - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); -} - -static void -mt7988_irq_unmask(struct irq_data *d) -{ - struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); - - priv->irq_enable |= BIT(d->hwirq); - mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); -} - -static struct irq_chip mt7988_irq_chip = { - .name = KBUILD_MODNAME, - .irq_mask = mt7988_irq_mask, - .irq_unmask = mt7988_irq_unmask, -}; - -static int -mt7988_irq_map(struct irq_domain *domain, unsigned int irq, - irq_hw_number_t hwirq) -{ - irq_set_chip_data(irq, domain->host_data); - irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq); - irq_set_nested_thread(irq, true); - irq_set_noprobe(irq); - - return 0; -} - -static const struct irq_domain_ops mt7988_irq_domain_ops = { - .map = mt7988_irq_map, - .xlate = irq_domain_xlate_onecell, -}; - static void mt7530_setup_mdio_irq(struct mt7530_priv *priv) { @@ -2191,49 +2212,72 @@ mt7530_setup_mdio_irq(struct mt7530_priv *priv) } } +static const struct regmap_irq mt7530_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 32), /* PHY0_LC */ + REGMAP_IRQ_REG_LINE(1, 32), /* PHY1_LC */ + REGMAP_IRQ_REG_LINE(2, 32), /* PHY2_LC */ + REGMAP_IRQ_REG_LINE(3, 32), /* PHY3_LC */ + REGMAP_IRQ_REG_LINE(4, 32), /* PHY4_LC */ + REGMAP_IRQ_REG_LINE(5, 32), /* PHY5_LC */ + REGMAP_IRQ_REG_LINE(6, 32), /* PHY6_LC */ + REGMAP_IRQ_REG_LINE(16, 32), /* MAC_PC */ + REGMAP_IRQ_REG_LINE(17, 32), /* BMU */ + REGMAP_IRQ_REG_LINE(18, 32), /* MIB */ + REGMAP_IRQ_REG_LINE(22, 32), /* ARL_COL_FULL_COL */ + REGMAP_IRQ_REG_LINE(23, 32), /* ARL_COL_FULL */ + REGMAP_IRQ_REG_LINE(24, 32), /* ARL_TBL_ERR */ + REGMAP_IRQ_REG_LINE(25, 32), /* ARL_PKT_QERR */ + REGMAP_IRQ_REG_LINE(26, 32), /* ARL_EQ_ERR */ + REGMAP_IRQ_REG_LINE(27, 32), /* ARL_PKT_BC */ + REGMAP_IRQ_REG_LINE(28, 32), /* ARL_SEC_IG1X */ + REGMAP_IRQ_REG_LINE(29, 32), /* ARL_SEC_VLAN */ + REGMAP_IRQ_REG_LINE(30, 32), /* ARL_SEC_TAG */ + REGMAP_IRQ_REG_LINE(31, 32), /* ACL */ +}; + +static const struct regmap_irq_chip mt7530_regmap_irq_chip = { + .name = KBUILD_MODNAME, + .status_base = MT7530_SYS_INT_STS, + .unmask_base = MT7530_SYS_INT_EN, + .ack_base = MT7530_SYS_INT_STS, + .init_ack_masked = true, + .irqs = mt7530_irqs, + .num_irqs = ARRAY_SIZE(mt7530_irqs), + .num_regs = 1, +}; + static int mt7530_setup_irq(struct mt7530_priv *priv) { + struct regmap_irq_chip_data *irq_data; struct device *dev = priv->dev; struct device_node *np = dev->of_node; - int ret; + int irq, ret; if (!of_property_read_bool(np, "interrupt-controller")) { dev_info(dev, "no interrupt support\n"); return 0; } - priv->irq = of_irq_get(np, 0); - if (priv->irq <= 0) { - dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq); - return priv->irq ? : -EINVAL; - } - - if (priv->id == ID_MT7988 || priv->id == ID_EN7581) - priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, - &mt7988_irq_domain_ops, - priv); - else - priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, - &mt7530_irq_domain_ops, - priv); - - if (!priv->irq_domain) { - dev_err(dev, "failed to create IRQ domain\n"); - return -ENOMEM; + irq = of_irq_get(np, 0); + if (irq <= 0) { + dev_err(dev, "failed to get parent IRQ: %d\n", irq); + return irq ? : -EINVAL; } /* This register must be set for MT7530 to properly fire interrupts */ if (priv->id == ID_MT7530 || priv->id == ID_MT7621) mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); - ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, - IRQF_ONESHOT, KBUILD_MODNAME, priv); - if (ret) { - irq_domain_remove(priv->irq_domain); - dev_err(dev, "failed to request IRQ: %d\n", ret); + ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), + priv->regmap, irq, + IRQF_ONESHOT, + 0, &mt7530_regmap_irq_chip, + &irq_data); + if (ret) return ret; - } + + priv->irq_domain = regmap_irq_get_domain(irq_data); return 0; } @@ -2253,26 +2297,6 @@ mt7530_free_mdio_irq(struct mt7530_priv *priv) } } -static void -mt7530_free_irq_common(struct mt7530_priv *priv) -{ - free_irq(priv->irq, priv); - irq_domain_remove(priv->irq_domain); -} - -static void -mt7530_free_irq(struct mt7530_priv *priv) -{ - struct device_node *mnp, *np = priv->dev->of_node; - - mnp = of_get_child_by_name(np, "mdio"); - if (!mnp) - mt7530_free_mdio_irq(priv); - of_node_put(mnp); - - mt7530_free_irq_common(priv); -} - static int mt7530_setup_mdio(struct mt7530_priv *priv) { @@ -2307,13 +2331,13 @@ mt7530_setup_mdio(struct mt7530_priv *priv) bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; - if (priv->irq && !mnp) + if (priv->irq_domain && !mnp) mt7530_setup_mdio_irq(priv); ret = devm_of_mdiobus_register(dev, bus, mnp); if (ret) { dev_err(dev, "failed to register MDIO bus: %d\n", ret); - if (priv->irq && !mnp) + if (priv->irq_domain && !mnp) mt7530_free_mdio_irq(priv); } @@ -2541,6 +2565,9 @@ mt7531_setup_common(struct dsa_switch *ds) struct mt7530_priv *priv = ds->priv; int ret, i; + ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + mt753x_trap_frames(priv); /* Enable and reset MIB counters */ @@ -2586,12 +2613,18 @@ mt7531_setup_common(struct dsa_switch *ds) /* Allow mirroring frames received on the local port (monitor port). */ mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Enable Special Tag for rx frames */ + if (priv->id == ID_EN7581 || priv->id == ID_AN7583) + mt7530_write(priv, MT753X_CPORT_SPTAG_CFG, + CPORT_SW2FE_STAG_EN | CPORT_FE2SW_STAG_EN); + /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) return ret; - return 0; + /* Setup VLAN ID 0 for VLAN-unaware bridges */ + return mt7530_setup_vlan0(priv); } static int @@ -2687,14 +2720,6 @@ mt7531_setup(struct dsa_switch *ds) if (ret) return ret; - /* Setup VLAN ID 0 for VLAN-unaware bridges */ - ret = mt7530_setup_vlan0(priv); - if (ret) - return ret; - - ds->assisted_learning_on_cpu_port = true; - ds->mtu_enforcement_ingress = true; - return 0; } @@ -2957,28 +2982,61 @@ static void mt753x_phylink_mac_link_up(struct phylink_config *config, mcr |= PMCR_FORCE_RX_FC_EN; } - if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { - switch (speed) { - case SPEED_1000: - case SPEED_2500: - mcr |= PMCR_FORCE_EEE1G; - break; - case SPEED_100: - mcr |= PMCR_FORCE_EEE100; - break; - } - } - mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr); } +static void mt753x_phylink_mac_disable_tx_lpi(struct phylink_config *config) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; + + mt7530_clear(priv, MT753X_PMCR_P(dp->index), + PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100); +} + +static int mt753x_phylink_mac_enable_tx_lpi(struct phylink_config *config, + u32 timer, bool tx_clock_stop) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct mt7530_priv *priv = dp->ds->priv; + u32 val; + + /* If the timer is zero, then set LPI_MODE_EN, which allows the + * system to enter LPI mode immediately rather than waiting for + * the LPI threshold. + */ + if (!timer) + val = LPI_MODE_EN; + else if (FIELD_FIT(LPI_THRESH_MASK, timer)) + val = FIELD_PREP(LPI_THRESH_MASK, timer); + else + val = LPI_THRESH_MASK; + + mt7530_rmw(priv, MT753X_PMEEECR_P(dp->index), + LPI_THRESH_MASK | LPI_MODE_EN, val); + + mt7530_set(priv, MT753X_PMCR_P(dp->index), + PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100); + + return 0; +} + static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { struct mt7530_priv *priv = ds->priv; + u32 eeecr; config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE; + config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD; + + eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port)); + /* tx_lpi_timer should be in microseconds. The time units for + * LPI threshold are unspecified. + */ + config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr); + priv->info->mac_port_get_caps(ds, port, config); } @@ -2994,7 +3052,7 @@ static int mt753x_pcs_validate(struct phylink_pcs *pcs, return 0; } -static void mt7530_pcs_get_state(struct phylink_pcs *pcs, +static void mt7530_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, struct phylink_link_state *state) { struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; @@ -3063,55 +3121,31 @@ mt753x_setup(struct dsa_switch *ds) return ret; ret = mt7530_setup_mdio(priv); - if (ret && priv->irq) - mt7530_free_irq_common(priv); if (ret) return ret; /* Initialise the PCS devices */ for (i = 0; i < priv->ds->num_ports; i++) { priv->pcs[i].pcs.ops = priv->info->pcs_ops; - priv->pcs[i].pcs.neg_mode = true; priv->pcs[i].priv = priv; priv->pcs[i].port = i; } - if (priv->create_sgmii) { + if (priv->create_sgmii) ret = priv->create_sgmii(priv); - if (ret && priv->irq) - mt7530_free_irq(priv); - } - - return ret; -} -static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_keee *e) -{ - struct mt7530_priv *priv = ds->priv; - u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port)); - - e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); - e->tx_lpi_timer = LPI_THRESH_GET(eeecr); + if (ret && priv->irq_domain) + mt7530_free_mdio_irq(priv); - return 0; + return ret; } static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { - struct mt7530_priv *priv = ds->priv; - u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; - if (e->tx_lpi_timer > 0xFFF) return -EINVAL; - set = LPI_THRESH_SET(e->tx_lpi_timer); - if (!e->tx_lpi_enabled) - /* Force LPI Mode without a delay */ - set |= LPI_MODE_EN; - mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set); - return 0; } @@ -3204,19 +3238,33 @@ static int mt7988_setup(struct dsa_switch *ds) reset_control_deassert(priv->rstc); usleep_range(20, 50); + /* AN7583 require additional tweak to CONN_CFG */ + if (priv->id == ID_AN7583) + mt7530_rmw(priv, AN7583_GEPHY_CONN_CFG, + AN7583_CSR_DPHY_CKIN_SEL | + AN7583_CSR_PHY_CORE_REG_CLK_SEL | + AN7583_CSR_ETHER_AFE_PWD, + AN7583_CSR_DPHY_CKIN_SEL | + AN7583_CSR_PHY_CORE_REG_CLK_SEL | + FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0)); + /* Reset the switch PHYs */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST); return mt7531_setup_common(ds); } -const struct dsa_switch_ops mt7530_switch_ops = { +static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, .preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port, .get_strings = mt7530_get_strings, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, + .get_eth_mac_stats = mt7530_get_eth_mac_stats, + .get_rmon_stats = mt7530_get_rmon_stats, + .get_eth_ctrl_stats = mt7530_get_eth_ctrl_stats, + .get_stats64 = mt7530_get_stats64, .set_ageing_time = mt7530_set_ageing_time, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, @@ -3238,18 +3286,21 @@ const struct dsa_switch_ops mt7530_switch_ops = { .port_mirror_add = mt753x_port_mirror_add, .port_mirror_del = mt753x_port_mirror_del, .phylink_get_caps = mt753x_phylink_get_caps, - .get_mac_eee = mt753x_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = mt753x_set_mac_eee, .conduit_state_change = mt753x_conduit_state_change, .port_setup_tc = mt753x_setup_tc, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; -EXPORT_SYMBOL_GPL(mt7530_switch_ops); static const struct phylink_mac_ops mt753x_phylink_mac_ops = { .mac_select_pcs = mt753x_phylink_mac_select_pcs, .mac_config = mt753x_phylink_mac_config, .mac_link_down = mt753x_phylink_mac_link_down, .mac_link_up = mt753x_phylink_mac_link_up, + .mac_disable_tx_lpi = mt753x_phylink_mac_disable_tx_lpi, + .mac_enable_tx_lpi = mt753x_phylink_mac_enable_tx_lpi, }; const struct mt753x_info mt753x_table[] = { @@ -3306,6 +3357,16 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c45 = mt7531_ind_c45_phy_write, .mac_port_get_caps = en7581_mac_port_get_caps, }, + [ID_AN7583] = { + .id = ID_AN7583, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7988_setup, + .phy_read_c22 = mt7531_ind_c22_phy_read, + .phy_write_c22 = mt7531_ind_c22_phy_write, + .phy_read_c45 = mt7531_ind_c45_phy_read, + .phy_write_c45 = mt7531_ind_c45_phy_write, + .mac_port_get_caps = en7581_mac_port_get_caps, + }, }; EXPORT_SYMBOL_GPL(mt753x_table); @@ -3343,8 +3404,8 @@ EXPORT_SYMBOL_GPL(mt7530_probe_common); void mt7530_remove_common(struct mt7530_priv *priv) { - if (priv->irq) - mt7530_free_irq(priv); + if (priv->irq_domain) + mt7530_free_mdio_irq(priv); dsa_unregister_switch(priv->ds); diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 448200689f49..3e0090bed298 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -20,6 +20,7 @@ enum mt753x_id { ID_MT7531 = 2, ID_MT7988 = 3, ID_EN7581 = 4, + ID_AN7583 = 5, }; #define NUM_TRGMII_CTRL 5 @@ -66,7 +67,8 @@ enum mt753x_id { #define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \ id == ID_MT7988 || \ - id == ID_EN7581) ? \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ MT7531_CFC : MT753X_MFC) #define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \ @@ -76,19 +78,22 @@ enum mt753x_id { #define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \ id == ID_MT7988 || \ - id == ID_EN7581) ? \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ MT7531_MIRROR_PORT_MASK : \ MT7530_MIRROR_PORT_MASK) #define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \ id == ID_MT7988 || \ - id == ID_EN7581) ? \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ MT7531_MIRROR_PORT_GET(val) : \ MT7530_MIRROR_PORT_GET(val)) #define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \ id == ID_MT7988 || \ - id == ID_EN7581) ? \ + id == ID_EN7581 || \ + id == ID_AN7583) ? \ MT7531_MIRROR_PORT_SET(val) : \ MT7530_MIRROR_PORT_SET(val)) @@ -423,6 +428,48 @@ enum mt7530_vlan_port_acc_frm { /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) +/* Each define is an offset of MT7530_PORT_MIB_COUNTER */ +#define MT7530_PORT_MIB_TX_DROP 0x00 +#define MT7530_PORT_MIB_TX_CRC_ERR 0x04 +#define MT7530_PORT_MIB_TX_UNICAST 0x08 +#define MT7530_PORT_MIB_TX_MULTICAST 0x0c +#define MT7530_PORT_MIB_TX_BROADCAST 0x10 +#define MT7530_PORT_MIB_TX_COLLISION 0x14 +#define MT7530_PORT_MIB_TX_SINGLE_COLLISION 0x18 +#define MT7530_PORT_MIB_TX_MULTIPLE_COLLISION 0x1c +#define MT7530_PORT_MIB_TX_DEFERRED 0x20 +#define MT7530_PORT_MIB_TX_LATE_COLLISION 0x24 +#define MT7530_PORT_MIB_TX_EXCESSIVE_COLLISION 0x28 +#define MT7530_PORT_MIB_TX_PAUSE 0x2c +#define MT7530_PORT_MIB_TX_PKT_SZ_64 0x30 +#define MT7530_PORT_MIB_TX_PKT_SZ_65_TO_127 0x34 +#define MT7530_PORT_MIB_TX_PKT_SZ_128_TO_255 0x38 +#define MT7530_PORT_MIB_TX_PKT_SZ_256_TO_511 0x3c +#define MT7530_PORT_MIB_TX_PKT_SZ_512_TO_1023 0x40 +#define MT7530_PORT_MIB_TX_PKT_SZ_1024_TO_MAX 0x44 +#define MT7530_PORT_MIB_TX_BYTES 0x48 /* 64 bytes */ +#define MT7530_PORT_MIB_RX_DROP 0x60 +#define MT7530_PORT_MIB_RX_FILTERING 0x64 +#define MT7530_PORT_MIB_RX_UNICAST 0x68 +#define MT7530_PORT_MIB_RX_MULTICAST 0x6c +#define MT7530_PORT_MIB_RX_BROADCAST 0x70 +#define MT7530_PORT_MIB_RX_ALIGN_ERR 0x74 +#define MT7530_PORT_MIB_RX_CRC_ERR 0x78 +#define MT7530_PORT_MIB_RX_UNDER_SIZE_ERR 0x7c +#define MT7530_PORT_MIB_RX_FRAG_ERR 0x80 +#define MT7530_PORT_MIB_RX_OVER_SZ_ERR 0x84 +#define MT7530_PORT_MIB_RX_JABBER_ERR 0x88 +#define MT7530_PORT_MIB_RX_PAUSE 0x8c +#define MT7530_PORT_MIB_RX_PKT_SZ_64 0x90 +#define MT7530_PORT_MIB_RX_PKT_SZ_65_TO_127 0x94 +#define MT7530_PORT_MIB_RX_PKT_SZ_128_TO_255 0x98 +#define MT7530_PORT_MIB_RX_PKT_SZ_256_TO_511 0x9c +#define MT7530_PORT_MIB_RX_PKT_SZ_512_TO_1023 0xa0 +#define MT7530_PORT_MIB_RX_PKT_SZ_1024_TO_MAX 0xa4 +#define MT7530_PORT_MIB_RX_BYTES 0xa8 /* 64 bytes */ +#define MT7530_PORT_MIB_RX_CTRL_DROP 0xb0 +#define MT7530_PORT_MIB_RX_INGRESS_DROP 0xb4 +#define MT7530_PORT_MIB_RX_ARL_DROP 0xb8 #define MT7530_MIB_CCR 0x4fe0 #define CCR_MIB_ENABLE BIT(31) #define CCR_RX_OCT_CNT_GOOD BIT(7) @@ -627,6 +674,15 @@ enum mt7531_xtal_fsel { #define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) #define MT7531_EXT_P_MDIO_12 (2 << 16) +#define MT753X_CPORT_SPTAG_CFG 0x7c10 +#define CPORT_SW2FE_STAG_EN BIT(1) +#define CPORT_FE2SW_STAG_EN BIT(0) + +#define AN7583_GEPHY_CONN_CFG 0x7c14 +#define AN7583_CSR_DPHY_CKIN_SEL BIT(31) +#define AN7583_CSR_PHY_CORE_REG_CLK_SEL BIT(30) +#define AN7583_CSR_ETHER_AFE_PWD GENMASK(28, 24) + /* Registers for LED GPIO control (MT7530 only) * All registers follow this pattern: * [ 2: 0] port 0 @@ -815,9 +871,7 @@ struct mt753x_info { * @p5_mode: Holding the current mode of port 5 of the MT7530 switch * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch * has got SGMII - * @irq: IRQ number of the switch * @irq_domain: IRQ domain of the switch irq_chip - * @irq_enable: IRQ enable bits, synced to SYS_INT_EN * @create_sgmii: Pointer to function creating SGMII PCS instance(s) * @active_cpu_ports: Holding the active CPU ports * @mdiodev: The pointer to the MDIO device structure @@ -842,9 +896,7 @@ struct mt7530_priv { struct mt753x_pcs pcs[MT7530_NUM_PORTS]; /* protect among processes for registers access*/ struct mutex reg_mutex; - int irq; struct irq_domain *irq_domain; - u32 irq_enable; int (*create_sgmii)(struct mt7530_priv *priv); u8 active_cpu_ports; struct mdio_device *mdiodev; @@ -887,7 +939,6 @@ static inline void INIT_MT7530_DUMMY_POLL(struct mt7530_dummy_poll *p, int mt7530_probe_common(struct mt7530_priv *priv); void mt7530_remove_common(struct mt7530_priv *priv); -extern const struct dsa_switch_ops mt7530_switch_ops; extern const struct mt753x_info mt753x_table[]; #endif /* __MT7530_H */ diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index 294312b58e4f..9c8ac14cd4f5 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -297,6 +297,8 @@ static const struct dsa_switch_ops mv88e6060_switch_ops = { .phy_read = mv88e6060_phy_read, .phy_write = mv88e6060_phy_write, .phylink_get_caps = mv88e6060_phylink_get_caps, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int mv88e6060_probe(struct mdio_device *mdiodev) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 3a792f79270d..b4d48997bf46 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -297,7 +297,7 @@ static int mv88e6xxx_g1_irq_setup_common(struct mv88e6xxx_chip *chip) u16 reg, mask; chip->g1_irq.nirqs = chip->info->g1_irqs; - chip->g1_irq.domain = irq_domain_add_simple( + chip->g1_irq.domain = irq_domain_create_simple( NULL, chip->g1_irq.nirqs, 0, &mv88e6xxx_g1_irq_domain_ops, chip); if (!chip->g1_irq.domain) @@ -394,7 +394,7 @@ static int mv88e6xxx_irq_poll_setup(struct mv88e6xxx_chip *chip) kthread_init_delayed_work(&chip->irq_poll_work, mv88e6xxx_irq_poll); - chip->kworker = kthread_create_worker(0, "%s", dev_name(chip->dev)); + chip->kworker = kthread_run_worker(0, "%s", dev_name(chip->dev)); if (IS_ERR(chip->kworker)) return PTR_ERR(chip->kworker); @@ -1289,9 +1289,6 @@ static size_t mv88e6095_stats_get_stat(struct mv88e6xxx_chip *chip, int port, const struct mv88e6xxx_hw_stat *stat, uint64_t *data) { - if (!(stat->type & (STATS_TYPE_BANK0 | STATS_TYPE_PORT))) - return 0; - *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0, MV88E6XXX_G1_STATS_OP_HIST_RX); return 1; @@ -1301,9 +1298,6 @@ static size_t mv88e6250_stats_get_stat(struct mv88e6xxx_chip *chip, int port, const struct mv88e6xxx_hw_stat *stat, uint64_t *data) { - if (!(stat->type & STATS_TYPE_BANK0)) - return 0; - *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, 0, MV88E6XXX_G1_STATS_OP_HIST_RX); return 1; @@ -1313,9 +1307,6 @@ static size_t mv88e6320_stats_get_stat(struct mv88e6xxx_chip *chip, int port, const struct mv88e6xxx_hw_stat *stat, uint64_t *data) { - if (!(stat->type & (STATS_TYPE_BANK0 | STATS_TYPE_BANK1))) - return 0; - *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, MV88E6XXX_G1_STATS_OP_BANK_1_BIT_9, MV88E6XXX_G1_STATS_OP_HIST_RX); @@ -1326,9 +1317,6 @@ static size_t mv88e6390_stats_get_stat(struct mv88e6xxx_chip *chip, int port, const struct mv88e6xxx_hw_stat *stat, uint64_t *data) { - if (!(stat->type & (STATS_TYPE_BANK0 | STATS_TYPE_BANK1))) - return 0; - *data = _mv88e6xxx_get_ethtool_stat(chip, stat, port, MV88E6XXX_G1_STATS_OP_BANK_1_BIT_10, 0); @@ -1341,6 +1329,9 @@ static size_t mv88e6xxx_stats_get_stat(struct mv88e6xxx_chip *chip, int port, { int ret = 0; + if (!(stat->type & chip->info->stats_type)) + return 0; + if (chip->info->ops->stats_get_stat) { mv88e6xxx_reg_lock(chip); ret = chip->info->ops->stats_get_stat(chip, port, stat, data); @@ -1522,13 +1513,6 @@ static void mv88e6xxx_get_regs(struct dsa_switch *ds, int port, mv88e6xxx_reg_unlock(chip); } -static int mv88e6xxx_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_keee *e) -{ - /* Nothing to do on the port's MAC */ - return 0; -} - static int mv88e6xxx_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) { @@ -1868,6 +1852,8 @@ static int mv88e6xxx_vtu_get(struct mv88e6xxx_chip *chip, u16 vid, if (!chip->info->ops->vtu_getnext) return -EOPNOTSUPP; + memset(entry, 0, sizeof(*entry)); + entry->vid = vid ? vid - 1 : mv88e6xxx_max_vid(chip); entry->valid = false; @@ -1976,7 +1962,16 @@ static int mv88e6xxx_mst_put(struct mv88e6xxx_chip *chip, u8 sid) struct mv88e6xxx_mst *mst, *tmp; int err; - if (!sid) + /* If the SID is zero, it is for a VLAN mapped to the default MSTI, + * and mv88e6xxx_stu_setup() made sure it is always present, and thus, + * should not be removed here. + * + * If the chip lacks STU support, numerically the "sid" variable will + * happen to also be zero, but we don't want to rely on that fact, so + * we explicitly test that first. In that case, there is also nothing + * to do here. + */ + if (!mv88e6xxx_has_stu(chip) || !sid) return 0; list_for_each_entry_safe(mst, tmp, &chip->msts, node) { @@ -2224,13 +2219,11 @@ mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port, return err; } -static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, - const unsigned char *addr, u16 vid, - u8 state) +static int mv88e6xxx_port_db_get(struct mv88e6xxx_chip *chip, + const unsigned char *addr, u16 vid, + u16 *fid, struct mv88e6xxx_atu_entry *entry) { - struct mv88e6xxx_atu_entry entry; struct mv88e6xxx_vtu_entry vlan; - u16 fid; int err; /* Ports have two private address databases: one for when the port is @@ -2241,7 +2234,7 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, * VLAN ID into the port's database used for VLAN-unaware bridging. */ if (vid == 0) { - fid = MV88E6XXX_FID_BRIDGED; + *fid = MV88E6XXX_FID_BRIDGED; } else { err = mv88e6xxx_vtu_get(chip, vid, &vlan); if (err) @@ -2251,14 +2244,39 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, if (!vlan.valid) return -EOPNOTSUPP; - fid = vlan.fid; + *fid = vlan.fid; } - entry.state = 0; - ether_addr_copy(entry.mac, addr); - eth_addr_dec(entry.mac); + entry->state = 0; + ether_addr_copy(entry->mac, addr); + eth_addr_dec(entry->mac); + + return mv88e6xxx_g1_atu_getnext(chip, *fid, entry); +} - err = mv88e6xxx_g1_atu_getnext(chip, fid, &entry); +static bool mv88e6xxx_port_db_find(struct mv88e6xxx_chip *chip, + const unsigned char *addr, u16 vid) +{ + struct mv88e6xxx_atu_entry entry; + u16 fid; + int err; + + err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry); + if (err) + return false; + + return entry.state && ether_addr_equal(entry.mac, addr); +} + +static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port, + const unsigned char *addr, u16 vid, + u8 state) +{ + struct mv88e6xxx_atu_entry entry; + u16 fid; + int err; + + err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry); if (err) return err; @@ -2862,6 +2880,13 @@ static int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port, mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid, MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC); + if (err) + goto out; + + if (!mv88e6xxx_port_db_find(chip, addr, vid)) + err = -ENOSPC; + +out: mv88e6xxx_reg_unlock(chip); return err; @@ -3660,6 +3685,21 @@ static int mv88e6xxx_stats_setup(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_stats_clear(chip); } +static int mv88e6320_setup_errata(struct mv88e6xxx_chip *chip) +{ + u16 dummy; + int err; + + /* Workaround for erratum + * 3.3 RGMII timing may be out of spec when transmit delay is enabled + */ + err = mv88e6xxx_port_hidden_write(chip, 0, 0xf, 0x7, 0xe000); + if (err) + return err; + + return mv88e6xxx_port_hidden_read(chip, 0, 0xf, 0x7, &dummy); +} + /* Check if the errata has already been applied. */ static bool mv88e6390_setup_errata_applied(struct mv88e6xxx_chip *chip) { @@ -3925,6 +3965,8 @@ static void mv88e6xxx_teardown(struct dsa_switch *ds) mv88e6xxx_teardown_devlink_params(ds); dsa_devlink_resources_unregister(ds); mv88e6xxx_teardown_devlink_regions_global(ds); + mv88e6xxx_hwtstamp_free(chip); + mv88e6xxx_ptp_free(chip); mv88e6xxx_mdios_unregister(chip); } @@ -4065,7 +4107,7 @@ unlock: mv88e6xxx_reg_unlock(chip); if (err) - goto out_mdios; + goto out_hwtstamp; /* Have to be called without holding the register lock, since * they take the devlink lock, and we later take the locks in @@ -4074,7 +4116,7 @@ unlock: */ err = mv88e6xxx_setup_devlink_resources(ds); if (err) - goto out_mdios; + goto out_hwtstamp; err = mv88e6xxx_setup_devlink_params(ds); if (err) @@ -4090,7 +4132,9 @@ out_params: mv88e6xxx_teardown_devlink_params(ds); out_resources: dsa_devlink_resources_unregister(ds); -out_mdios: +out_hwtstamp: + mv88e6xxx_hwtstamp_free(chip); + mv88e6xxx_ptp_free(chip); mv88e6xxx_mdios_unregister(chip); return err; @@ -5048,7 +5092,7 @@ static const struct mv88e6xxx_ops mv88e6250_ops = { .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, .avb_ops = &mv88e6352_avb_ops, - .ptp_ops = &mv88e6250_ptp_ops, + .ptp_ops = &mv88e6352_ptp_ops, .phylink_get_caps = mv88e6250_phylink_get_caps, .set_max_frame_size = mv88e6185_g1_set_max_frame_size, }; @@ -5116,6 +5160,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = { static const struct mv88e6xxx_ops mv88e6320_ops = { /* MV88E6XXX_FAMILY_6320 */ + .setup_errata = mv88e6320_setup_errata, .ieee_pri_map = mv88e6085_g1_ieee_pri_map, .ip_pri_map = mv88e6085_g1_ip_pri_map, .irl_init_all = mv88e6352_g2_irl_init_all, @@ -5131,6 +5176,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay, .port_set_speed_duplex = mv88e6185_port_set_speed_duplex, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, @@ -5155,8 +5201,10 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, - .vtu_getnext = mv88e6185_g1_vtu_getnext, - .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, + .vtu_getnext = mv88e6352_g1_vtu_getnext, + .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .stu_getnext = mv88e6352_g1_stu_getnext, + .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, @@ -5165,6 +5213,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { static const struct mv88e6xxx_ops mv88e6321_ops = { /* MV88E6XXX_FAMILY_6320 */ + .setup_errata = mv88e6320_setup_errata, .ieee_pri_map = mv88e6085_g1_ieee_pri_map, .ip_pri_map = mv88e6085_g1_ip_pri_map, .irl_init_all = mv88e6352_g2_irl_init_all, @@ -5180,6 +5229,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay, .port_set_speed_duplex = mv88e6185_port_set_speed_duplex, .port_tag_remap = mv88e6095_port_tag_remap, + .port_set_policy = mv88e6352_port_set_policy, .port_set_frame_mode = mv88e6351_port_set_frame_mode, .port_set_ucast_flood = mv88e6352_port_set_ucast_flood, .port_set_mcast_flood = mv88e6352_port_set_mcast_flood, @@ -5203,8 +5253,10 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, - .vtu_getnext = mv88e6185_g1_vtu_getnext, - .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, + .vtu_getnext = mv88e6352_g1_vtu_getnext, + .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .stu_getnext = mv88e6352_g1_stu_getnext, + .stu_loadpurge = mv88e6352_g1_stu_loadpurge, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, @@ -5645,6 +5697,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 5, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ops = &mv88e6250_ops, @@ -5665,6 +5718,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 5, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ops = &mv88e6250_ops, @@ -5687,6 +5741,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5708,6 +5763,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 8, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .ops = &mv88e6095_ops, @@ -5730,6 +5786,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5754,6 +5811,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5776,6 +5834,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 9, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .ops = &mv88e6131_ops, @@ -5797,9 +5856,10 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global1_addr = 0x1b, .global2_addr = 0x1c, .age_time_coeff = 3750, - .atu_move_port_mask = 0x1f, + .atu_move_port_mask = 0xf, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -5823,6 +5883,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5848,6 +5909,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5872,6 +5934,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5897,6 +5960,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5921,6 +5985,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5946,6 +6011,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -5968,6 +6034,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global2_addr = 0x1c, .age_time_coeff = 15000, .g1_irqs = 8, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -5992,6 +6059,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .atu_move_port_mask = 0x1f, @@ -6016,6 +6084,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6039,6 +6108,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6063,6 +6133,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6087,6 +6158,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6114,6 +6186,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ptp_support = true, @@ -6138,6 +6211,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6161,6 +6235,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0, .atu_move_port_mask = 0xf, .dual_chip = true, .ptp_support = true, @@ -6184,6 +6259,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6198,9 +6274,11 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .num_databases = 4096, .num_macs = 8192, .num_ports = 7, - .num_internal_phys = 5, + .num_internal_phys = 2, + .internal_phys_offset = 3, .num_gpio = 15, .max_vid = 4095, + .max_sid = 63, .port_base_addr = 0x10, .phy_base_addr = 0x0, .global1_addr = 0x1b, @@ -6208,6 +6286,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6223,9 +6302,11 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .num_databases = 4096, .num_macs = 8192, .num_ports = 7, - .num_internal_phys = 5, + .num_internal_phys = 2, + .internal_phys_offset = 3, .num_gpio = 15, .max_vid = 4095, + .max_sid = 63, .port_base_addr = 0x10, .phy_base_addr = 0x0, .global1_addr = 0x1b, @@ -6233,7 +6314,9 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 8, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0xf, + .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, .ptp_support = true, @@ -6256,9 +6339,10 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .global1_addr = 0x1b, .global2_addr = 0x1c, .age_time_coeff = 3750, - .atu_move_port_mask = 0x1f, + .atu_move_port_mask = 0xf, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .pvt = true, .multi_chip = true, .edsa_support = MV88E6XXX_EDSA_SUPPORTED, @@ -6283,6 +6367,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6307,6 +6392,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6332,6 +6418,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 15000, .g1_irqs = 9, .g2_irqs = 10, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_PORT, .atu_move_port_mask = 0xf, .pvt = true, .multi_chip = true, @@ -6359,6 +6446,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6383,6 +6471,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6408,6 +6497,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 9, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6433,6 +6523,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = { .age_time_coeff = 3750, .g1_irqs = 10, .g2_irqs = 14, + .stats_type = STATS_TYPE_BANK0 | STATS_TYPE_BANK1, .atu_move_port_mask = 0x1f, .pvt = true, .multi_chip = true, @@ -6596,6 +6687,13 @@ static int mv88e6xxx_port_mdb_add(struct dsa_switch *ds, int port, mv88e6xxx_reg_lock(chip); err = mv88e6xxx_port_db_load_purge(chip, port, mdb->addr, mdb->vid, MV88E6XXX_G1_ATU_DATA_STATE_MC_STATIC); + if (err) + goto out; + + if (!mv88e6xxx_port_db_find(chip, mdb->addr, mdb->vid)) + err = -ENOSPC; + +out: mv88e6xxx_reg_unlock(chip); return err; @@ -7074,7 +7172,7 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .get_sset_count = mv88e6xxx_get_sset_count, .port_max_mtu = mv88e6xxx_get_max_mtu, .port_change_mtu = mv88e6xxx_change_mtu, - .get_mac_eee = mv88e6xxx_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = mv88e6xxx_set_mac_eee, .get_eeprom_len = mv88e6xxx_get_eeprom_len, .get_eeprom = mv88e6xxx_get_eeprom, @@ -7267,13 +7365,13 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev) err = mv88e6xxx_switch_reset(chip); mv88e6xxx_reg_unlock(chip); if (err) - goto out; + goto out_phy; if (np) { chip->irq = of_irq_get(np, 0); if (chip->irq == -EPROBE_DEFER) { err = chip->irq; - goto out; + goto out_phy; } } @@ -7292,7 +7390,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev) mv88e6xxx_reg_unlock(chip); if (err) - goto out; + goto out_phy; if (chip->info->g2_irqs > 0) { err = mv88e6xxx_g2_irq_setup(chip); @@ -7326,6 +7424,8 @@ out_g1_irq: mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); +out_phy: + mv88e6xxx_phy_destroy(chip); out: if (pdata) dev_put(pdata->netdev); @@ -7343,12 +7443,6 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) chip = ds->priv; - if (chip->info->ptp_support) { - mv88e6xxx_hwtstamp_free(chip); - mv88e6xxx_ptp_free(chip); - } - - mv88e6xxx_phy_destroy(chip); mv88e6xxx_unregister_switch(chip); mv88e6xxx_g1_vtu_prob_irq_free(chip); @@ -7361,6 +7455,8 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); + + mv88e6xxx_phy_destroy(chip); } static void mv88e6xxx_shutdown(struct mdio_device *mdiodev) diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 9fe8e8a7856b..2f211e55cb47 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -144,6 +144,7 @@ struct mv88e6xxx_info { unsigned int age_time_coeff; unsigned int g1_irqs; unsigned int g2_irqs; + int stats_type; bool pvt; /* Mark certain ports as invalid. This is required for example for the @@ -240,7 +241,7 @@ struct mv88e6xxx_port_hwtstamp { u16 tx_seq_id; /* Current timestamp configuration */ - struct hwtstamp_config tstamp_config; + struct kernel_hwtstamp_config tstamp_config; }; enum mv88e6xxx_policy_mapping { @@ -423,8 +424,6 @@ struct mv88e6xxx_chip { struct ptp_clock_info ptp_clock_info; struct delayed_work tai_event_work; struct ptp_pin_desc pin_config[MV88E6XXX_MAX_GPIO]; - u16 trig_config; - u16 evcap_config; u16 enable_count; /* Current ingress and egress monitor ports */ @@ -731,7 +730,7 @@ struct mv88e6xxx_avb_ops { }; struct mv88e6xxx_ptp_ops { - u64 (*clock_read)(const struct cyclecounter *cc); + u64 (*clock_read)(struct cyclecounter *cc); int (*ptp_enable)(struct ptp_clock_info *ptp, struct ptp_clock_request *rq, int on); int (*ptp_verify)(struct ptp_clock_info *ptp, unsigned int pin, diff --git a/drivers/net/dsa/mv88e6xxx/devlink.c b/drivers/net/dsa/mv88e6xxx/devlink.c index 795c8df7b6a7..da69e0b85879 100644 --- a/drivers/net/dsa/mv88e6xxx/devlink.c +++ b/drivers/net/dsa/mv88e6xxx/devlink.c @@ -376,19 +376,14 @@ static int mv88e6xxx_region_atu_snapshot(struct devlink *dl, struct dsa_switch *ds = dsa_devlink_to_ds(dl); struct mv88e6xxx_devlink_atu_entry *table; struct mv88e6xxx_chip *chip = ds->priv; - int fid = -1, err = 0, count; + int fid = -1, err = 0, count = 0; - table = kmalloc_array(mv88e6xxx_num_databases(chip), - sizeof(struct mv88e6xxx_devlink_atu_entry), - GFP_KERNEL); + table = kcalloc(mv88e6xxx_num_databases(chip), + sizeof(struct mv88e6xxx_devlink_atu_entry), + GFP_KERNEL); if (!table) return -ENOMEM; - memset(table, 0, mv88e6xxx_num_databases(chip) * - sizeof(struct mv88e6xxx_devlink_atu_entry)); - - count = 0; - mv88e6xxx_reg_lock(chip); while (1) { @@ -647,7 +642,7 @@ static struct mv88e6xxx_region_priv mv88e6xxx_region_global1_priv = { .id = MV88E6XXX_REGION_GLOBAL1, }; -static struct devlink_region_ops mv88e6xxx_region_global1_ops = { +static const struct devlink_region_ops mv88e6xxx_region_global1_ops = { .name = "global1", .snapshot = mv88e6xxx_region_global_snapshot, .destructor = kfree, @@ -658,32 +653,32 @@ static struct mv88e6xxx_region_priv mv88e6xxx_region_global2_priv = { .id = MV88E6XXX_REGION_GLOBAL2, }; -static struct devlink_region_ops mv88e6xxx_region_global2_ops = { +static const struct devlink_region_ops mv88e6xxx_region_global2_ops = { .name = "global2", .snapshot = mv88e6xxx_region_global_snapshot, .destructor = kfree, .priv = &mv88e6xxx_region_global2_priv, }; -static struct devlink_region_ops mv88e6xxx_region_atu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_atu_ops = { .name = "atu", .snapshot = mv88e6xxx_region_atu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_vtu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_vtu_ops = { .name = "vtu", .snapshot = mv88e6xxx_region_vtu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_stu_ops = { +static const struct devlink_region_ops mv88e6xxx_region_stu_ops = { .name = "stu", .snapshot = mv88e6xxx_region_stu_snapshot, .destructor = kfree, }; -static struct devlink_region_ops mv88e6xxx_region_pvt_ops = { +static const struct devlink_region_ops mv88e6xxx_region_pvt_ops = { .name = "pvt", .snapshot = mv88e6xxx_region_pvt_snapshot, .destructor = kfree, @@ -696,13 +691,13 @@ static const struct devlink_port_region_ops mv88e6xxx_region_port_ops = { }; struct mv88e6xxx_region { - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; u64 size; bool (*cond)(struct mv88e6xxx_chip *chip); }; -static struct mv88e6xxx_region mv88e6xxx_regions[] = { +static const struct mv88e6xxx_region mv88e6xxx_regions[] = { [MV88E6XXX_REGION_GLOBAL1] = { .ops = &mv88e6xxx_region_global1_ops, .size = 32 * sizeof(u16) @@ -736,7 +731,8 @@ void mv88e6xxx_teardown_devlink_regions_global(struct dsa_switch *ds) int i; for (i = 0; i < ARRAY_SIZE(mv88e6xxx_regions); i++) - dsa_devlink_region_destroy(chip->regions[i]); + if (chip->regions[i]) + dsa_devlink_region_destroy(chip->regions[i]); } void mv88e6xxx_teardown_devlink_regions_port(struct dsa_switch *ds, int port) @@ -767,7 +763,7 @@ int mv88e6xxx_setup_devlink_regions_global(struct dsa_switch *ds) { bool (*cond)(struct mv88e6xxx_chip *chip); struct mv88e6xxx_chip *chip = ds->priv; - struct devlink_region_ops *ops; + const struct devlink_region_ops *ops; struct devlink_region *region; u64 size; int i, j; diff --git a/drivers/net/dsa/mv88e6xxx/global2.c b/drivers/net/dsa/mv88e6xxx/global2.c index b2b5f6ba438f..30a6ffa7817b 100644 --- a/drivers/net/dsa/mv88e6xxx/global2.c +++ b/drivers/net/dsa/mv88e6xxx/global2.c @@ -1154,8 +1154,8 @@ int mv88e6xxx_g2_irq_setup(struct mv88e6xxx_chip *chip) if (err) return err; - chip->g2_irq.domain = irq_domain_add_simple( - chip->dev->of_node, 16, 0, &mv88e6xxx_g2_irq_domain_ops, chip); + chip->g2_irq.domain = irq_domain_create_simple(dev_fwnode(chip->dev), 16, 0, + &mv88e6xxx_g2_irq_domain_ops, chip); if (!chip->g2_irq.domain) return -ENOMEM; diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.c b/drivers/net/dsa/mv88e6xxx/hwtstamp.c index 49e6e1355142..6e6472a3b75a 100644 --- a/drivers/net/dsa/mv88e6xxx/hwtstamp.c +++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.c @@ -89,7 +89,7 @@ int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, } static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config) { const struct mv88e6xxx_ptp_ops *ptp_ops = chip->info->ops->ptp_ops; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; @@ -169,42 +169,38 @@ static int mv88e6xxx_set_hwtstamp_config(struct mv88e6xxx_chip *chip, int port, } int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; - struct hwtstamp_config config; int err; if (!chip->info->ptp_support) return -EOPNOTSUPP; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - err = mv88e6xxx_set_hwtstamp_config(chip, port, &config); + err = mv88e6xxx_set_hwtstamp_config(chip, port, config); if (err) return err; /* Save the chosen configuration to be returned later. */ - memcpy(&ps->tstamp_config, &config, sizeof(config)); + ps->tstamp_config = *config; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_port_hwtstamp *ps = &chip->port_hwtstamp[port]; - struct hwtstamp_config *config = &ps->tstamp_config; if (!chip->info->ptp_support) return -EOPNOTSUPP; - return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? - -EFAULT : 0; + *config = ps->tstamp_config; + + return 0; } /* Returns a pointer to the PTP header if the caller should time stamp, @@ -574,7 +570,7 @@ int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip) } /* Set the ethertype of L2 PTP messages */ - err = mv88e6xxx_ptp_write(chip, MV88E6XXX_PTP_GC_ETYPE, ETH_P_1588); + err = mv88e6xxx_ptp_write(chip, MV88E6XXX_PTP_ETHERTYPE, ETH_P_1588); if (err) return err; diff --git a/drivers/net/dsa/mv88e6xxx/hwtstamp.h b/drivers/net/dsa/mv88e6xxx/hwtstamp.h index 85acc758e3eb..c359821d5a6e 100644 --- a/drivers/net/dsa/mv88e6xxx/hwtstamp.h +++ b/drivers/net/dsa/mv88e6xxx/hwtstamp.h @@ -111,9 +111,10 @@ #ifdef CONFIG_NET_DSA_MV88E6XXX_PTP int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *cfg, + struct netlink_ext_ack *extack); int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr); + struct kernel_hwtstamp_config *cfg); bool mv88e6xxx_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *clone, unsigned int type); @@ -123,6 +124,7 @@ void mv88e6xxx_port_txtstamp(struct dsa_switch *ds, int port, int mv88e6xxx_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_info *info); +long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp); int mv88e6xxx_hwtstamp_setup(struct mv88e6xxx_chip *chip); void mv88e6xxx_hwtstamp_free(struct mv88e6xxx_chip *chip); int mv88e6352_hwtstamp_port_enable(struct mv88e6xxx_chip *chip, int port); @@ -132,14 +134,17 @@ int mv88e6165_global_disable(struct mv88e6xxx_chip *chip); #else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */ -static inline int mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, - int port, struct ifreq *ifr) +static inline int +mv88e6xxx_port_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { return -EOPNOTSUPP; } -static inline int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, - int port, struct ifreq *ifr) +static inline int +mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { return -EOPNOTSUPP; } diff --git a/drivers/net/dsa/mv88e6xxx/leds.c b/drivers/net/dsa/mv88e6xxx/leds.c index 1c88bfaea46b..ab3bc645da56 100644 --- a/drivers/net/dsa/mv88e6xxx/leds.c +++ b/drivers/net/dsa/mv88e6xxx/leds.c @@ -779,7 +779,8 @@ int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port) continue; if (led_num > 1) { dev_err(dev, "invalid LED specified port %d\n", port); - return -EINVAL; + ret = -EINVAL; + goto err_put_led; } if (led_num == 0) @@ -823,17 +824,25 @@ int mv88e6xxx_port_setup_leds(struct mv88e6xxx_chip *chip, int port) init_data.devname_mandatory = true; init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d:0%d", chip->info->name, port, led_num); - if (!init_data.devicename) - return -ENOMEM; + if (!init_data.devicename) { + ret = -ENOMEM; + goto err_put_led; + } ret = devm_led_classdev_register_ext(dev, l, &init_data); kfree(init_data.devicename); if (ret) { dev_err(dev, "Failed to init LED %d for port %d", led_num, port); - return ret; + goto err_put_led; } } + fwnode_handle_put(leds); return 0; + +err_put_led: + fwnode_handle_put(led); + fwnode_handle_put(leds); + return ret; } diff --git a/drivers/net/dsa/mv88e6xxx/pcs-6185.c b/drivers/net/dsa/mv88e6xxx/pcs-6185.c index 5a27d047a38e..af7e06d265f7 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-6185.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-6185.c @@ -55,6 +55,7 @@ static irqreturn_t mv88e6185_pcs_handle_irq(int irq, void *dev_id) } static void mv88e6185_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e6185_pcs *mpcs = pcs_to_mv88e6185_pcs(pcs); @@ -137,7 +138,6 @@ static int mv88e6185_pcs_init(struct mv88e6xxx_chip *chip, int port) mpcs->chip = chip; mpcs->port = port; mpcs->phylink_pcs.ops = &mv88e6185_phylink_pcs_ops; - mpcs->phylink_pcs.neg_mode = true; irq = mv88e6xxx_serdes_irq_mapping(chip, port); if (irq) { diff --git a/drivers/net/dsa/mv88e6xxx/pcs-6352.c b/drivers/net/dsa/mv88e6xxx/pcs-6352.c index 88f624b65470..36993400837e 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-6352.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-6352.c @@ -158,6 +158,7 @@ static void marvell_c22_pcs_disable(struct phylink_pcs *pcs) } static void marvell_c22_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct marvell_c22_pcs *mpcs = pcs_to_marvell_c22_pcs(pcs); @@ -274,7 +275,6 @@ static struct marvell_c22_pcs *marvell_c22_pcs_alloc(struct device *dev, mpcs->mdio.bus = bus; mpcs->mdio.addr = addr; mpcs->phylink_pcs.ops = &marvell_c22_pcs_ops; - mpcs->phylink_pcs.neg_mode = true; return mpcs; } diff --git a/drivers/net/dsa/mv88e6xxx/pcs-639x.c b/drivers/net/dsa/mv88e6xxx/pcs-639x.c index d758a6c1b226..5db17c0b77f5 100644 --- a/drivers/net/dsa/mv88e6xxx/pcs-639x.c +++ b/drivers/net/dsa/mv88e6xxx/pcs-639x.c @@ -9,6 +9,7 @@ #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/mii.h> +#include <linux/string_choices.h> #include "chip.h" #include "global2.h" @@ -257,6 +258,7 @@ static int mv88e639x_sgmii_pcs_post_config(struct phylink_pcs *pcs, } static void mv88e639x_sgmii_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e639x_pcs *mpcs = sgmii_pcs_to_mv88e639x_pcs(pcs); @@ -395,6 +397,7 @@ static void mv88e639x_xg_pcs_disable(struct mv88e639x_pcs *mpcs) } static void mv88e639x_xg_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); @@ -562,9 +565,7 @@ static int mv88e6390_pcs_init(struct mv88e6xxx_chip *chip, int port) return -ENOMEM; mpcs->sgmii_pcs.ops = &mv88e639x_sgmii_pcs_ops; - mpcs->sgmii_pcs.neg_mode = true; mpcs->xg_pcs.ops = &mv88e6390_xg_pcs_ops; - mpcs->xg_pcs.neg_mode = true; if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6190X || chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6390X) @@ -748,7 +749,7 @@ static int mv88e6393x_sgmii_apply_2500basex_an(struct mv88e639x_pcs *mpcs, if (err) dev_err(mpcs->mdio.dev.parent, "failed to %s 2500basex fix: %pe\n", - enable ? "enable" : "disable", ERR_PTR(err)); + str_enable_disable(enable), ERR_PTR(err)); return err; } @@ -889,6 +890,7 @@ static int mv88e6393x_xg_pcs_post_config(struct phylink_pcs *pcs, } static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs, + unsigned int neg_mode, struct phylink_link_state *state) { struct mv88e639x_pcs *mpcs = xg_pcs_to_mv88e639x_pcs(pcs); @@ -896,7 +898,7 @@ static void mv88e6393x_xg_pcs_get_state(struct phylink_pcs *pcs, int err; if (state->interface != PHY_INTERFACE_MODE_USXGMII) - return mv88e639x_xg_pcs_get_state(pcs, state); + return mv88e639x_xg_pcs_get_state(pcs, neg_mode, state); state->link = false; @@ -941,9 +943,7 @@ static int mv88e6393x_pcs_init(struct mv88e6xxx_chip *chip, int port) return -ENOMEM; mpcs->sgmii_pcs.ops = &mv88e6393x_sgmii_pcs_ops; - mpcs->sgmii_pcs.neg_mode = true; mpcs->xg_pcs.ops = &mv88e6393x_xg_pcs_ops; - mpcs->xg_pcs.neg_mode = true; mpcs->supports_5g = true; err = mv88e6393x_erratum_4_6(mpcs); diff --git a/drivers/net/dsa/mv88e6xxx/phy.c b/drivers/net/dsa/mv88e6xxx/phy.c index 8bb88b3d900d..4e7827ee684a 100644 --- a/drivers/net/dsa/mv88e6xxx/phy.c +++ b/drivers/net/dsa/mv88e6xxx/phy.c @@ -182,7 +182,7 @@ static void mv88e6xxx_phy_ppu_reenable_work(struct work_struct *ugly) static void mv88e6xxx_phy_ppu_reenable_timer(struct timer_list *t) { - struct mv88e6xxx_chip *chip = from_timer(chip, t, ppu_timer); + struct mv88e6xxx_chip *chip = timer_container_of(chip, t, ppu_timer); schedule_work(&chip->ppu_work); } @@ -206,7 +206,7 @@ static int mv88e6xxx_phy_ppu_access_get(struct mv88e6xxx_chip *chip) } chip->ppu_disabled = 1; } else { - del_timer(&chip->ppu_timer); + timer_delete(&chip->ppu_timer); ret = 0; } @@ -229,7 +229,10 @@ static void mv88e6xxx_phy_ppu_state_init(struct mv88e6xxx_chip *chip) static void mv88e6xxx_phy_ppu_state_destroy(struct mv88e6xxx_chip *chip) { - del_timer_sync(&chip->ppu_timer); + mutex_lock(&chip->ppu_mutex); + timer_delete_sync(&chip->ppu_timer); + cancel_work_sync(&chip->ppu_work); + mutex_unlock(&chip->ppu_mutex); } int mv88e6185_phy_ppu_read(struct mv88e6xxx_chip *chip, struct mii_bus *bus, diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c index dc777ddce1f3..66b1b7277281 100644 --- a/drivers/net/dsa/mv88e6xxx/port.c +++ b/drivers/net/dsa/mv88e6xxx/port.c @@ -13,6 +13,7 @@ #include <linux/phy.h> #include <linux/phylink.h> #include <linux/property.h> +#include <linux/string_choices.h> #include "chip.h" #include "global2.h" @@ -176,7 +177,7 @@ int mv88e6xxx_port_set_link(struct mv88e6xxx_chip *chip, int port, int link) dev_dbg(chip->dev, "p%d: %s link %s\n", port, reg & MV88E6XXX_PORT_MAC_CTL_FORCE_LINK ? "Force" : "Unforce", - reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP ? "up" : "down"); + str_up_down(reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP)); return 0; } diff --git a/drivers/net/dsa/mv88e6xxx/ptp.c b/drivers/net/dsa/mv88e6xxx/ptp.c index aed4a4b07f34..f7603573d3a9 100644 --- a/drivers/net/dsa/mv88e6xxx/ptp.c +++ b/drivers/net/dsa/mv88e6xxx/ptp.c @@ -138,13 +138,13 @@ mv88e6xxx_cc_coeff_get(struct mv88e6xxx_chip *chip) } } -static u64 mv88e6352_ptp_clock_read(const struct cyclecounter *cc) +static u64 mv88e6352_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); u16 phc_time[2]; int err; - err = mv88e6xxx_tai_read(chip, MV88E6XXX_TAI_TIME_LO, phc_time, + err = mv88e6xxx_tai_read(chip, MV88E6352_TAI_TIME_LO, phc_time, ARRAY_SIZE(phc_time)); if (err) return 0; @@ -152,13 +152,13 @@ static u64 mv88e6352_ptp_clock_read(const struct cyclecounter *cc) return ((u32)phc_time[1] << 16) | phc_time[0]; } -static u64 mv88e6165_ptp_clock_read(const struct cyclecounter *cc) +static u64 mv88e6165_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); u16 phc_time[2]; int err; - err = mv88e6xxx_tai_read(chip, MV88E6XXX_PTP_GC_TIME_LO, phc_time, + err = mv88e6xxx_tai_read(chip, MV88E6165_PTP_GC_TIME_LO, phc_time, ARRAY_SIZE(phc_time)); if (err) return 0; @@ -167,42 +167,26 @@ static u64 mv88e6165_ptp_clock_read(const struct cyclecounter *cc) } /* mv88e6352_config_eventcap - configure TAI event capture - * @event: PTP_CLOCK_PPS (internal) or PTP_CLOCK_EXTTS (external) * @rising: zero for falling-edge trigger, else rising-edge trigger * * This will also reset the capture sequence counter. */ -static int mv88e6352_config_eventcap(struct mv88e6xxx_chip *chip, int event, - int rising) +static int mv88e6352_config_eventcap(struct mv88e6xxx_chip *chip, int rising) { - u16 global_config; - u16 cap_config; + u16 evcap_config; int err; - chip->evcap_config = MV88E6XXX_TAI_CFG_CAP_OVERWRITE | - MV88E6XXX_TAI_CFG_CAP_CTR_START; + evcap_config = MV88E6352_TAI_CFG_CAP_OVERWRITE | + MV88E6352_TAI_CFG_CAP_CTR_START; if (!rising) - chip->evcap_config |= MV88E6XXX_TAI_CFG_EVREQ_FALLING; + evcap_config |= MV88E6352_TAI_CFG_EVREQ_FALLING; - global_config = (chip->evcap_config | chip->trig_config); - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_CFG, global_config); + err = mv88e6xxx_tai_write(chip, MV88E6352_TAI_CFG, evcap_config); if (err) return err; - if (event == PTP_CLOCK_PPS) { - cap_config = MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG; - } else if (event == PTP_CLOCK_EXTTS) { - /* if STATUS_CAP_TRIG is unset we capture PTP_EVREQ events */ - cap_config = 0; - } else { - return -EINVAL; - } - /* Write the capture config; this also clears the capture counter */ - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_EVENT_STATUS, - cap_config); - - return err; + return mv88e6xxx_tai_write(chip, MV88E6352_TAI_EVENT_STATUS, 0); } static void mv88e6352_tai_event_work(struct work_struct *ugly) @@ -215,7 +199,7 @@ static void mv88e6352_tai_event_work(struct work_struct *ugly) int err; mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_tai_read(chip, MV88E6XXX_TAI_EVENT_STATUS, + err = mv88e6xxx_tai_read(chip, MV88E6352_TAI_EVENT_STATUS, status, ARRAY_SIZE(status)); mv88e6xxx_reg_unlock(chip); @@ -223,19 +207,19 @@ static void mv88e6352_tai_event_work(struct work_struct *ugly) dev_err(chip->dev, "failed to read TAI status register\n"); return; } - if (status[0] & MV88E6XXX_TAI_EVENT_STATUS_ERROR) { + if (status[0] & MV88E6352_TAI_EVENT_STATUS_ERROR) { dev_warn(chip->dev, "missed event capture\n"); return; } - if (!(status[0] & MV88E6XXX_TAI_EVENT_STATUS_VALID)) + if (!(status[0] & MV88E6352_TAI_EVENT_STATUS_VALID)) goto out; raw_ts = ((u32)status[2] << 16) | status[1]; /* Clear the valid bit so the next timestamp can come in */ - status[0] &= ~MV88E6XXX_TAI_EVENT_STATUS_VALID; + status[0] &= ~MV88E6352_TAI_EVENT_STATUS_VALID; mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_EVENT_STATUS, status[0]); + err = mv88e6xxx_tai_write(chip, MV88E6352_TAI_EVENT_STATUS, status[0]); mv88e6xxx_reg_unlock(chip); if (err) { dev_err(chip->dev, "failed to write TAI status register\n"); @@ -332,13 +316,6 @@ static int mv88e6352_ptp_enable_extts(struct mv88e6xxx_chip *chip, int pin; int err; - /* Reject requests with unsupported flags */ - if (rq->extts.flags & ~(PTP_ENABLE_FEATURE | - PTP_RISING_EDGE | - PTP_FALLING_EDGE | - PTP_STRICT_FLAGS)) - return -EOPNOTSUPP; - /* Reject requests to enable time stamping on both edges. */ if ((rq->extts.flags & PTP_STRICT_FLAGS) && (rq->extts.flags & PTP_ENABLE_FEATURE) && @@ -362,7 +339,7 @@ static int mv88e6352_ptp_enable_extts(struct mv88e6xxx_chip *chip, schedule_delayed_work(&chip->tai_event_work, TAI_EVENT_WORK_INTERVAL); - err = mv88e6352_config_eventcap(chip, PTP_CLOCK_EXTTS, rising); + err = mv88e6352_config_eventcap(chip, rising); } else { func = MV88E6352_G2_SCRATCH_GPIO_PCTL_GPIO; @@ -420,29 +397,6 @@ const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = { (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), }; -const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops = { - .clock_read = mv88e6352_ptp_clock_read, - .ptp_enable = mv88e6352_ptp_enable, - .ptp_verify = mv88e6352_ptp_verify, - .event_work = mv88e6352_tai_event_work, - .port_enable = mv88e6352_hwtstamp_port_enable, - .port_disable = mv88e6352_hwtstamp_port_disable, - .n_ext_ts = 1, - .arr0_sts_reg = MV88E6XXX_PORT_PTP_ARR0_STS, - .arr1_sts_reg = MV88E6XXX_PORT_PTP_ARR1_STS, - .dep_sts_reg = MV88E6XXX_PORT_PTP_DEP_STS, - .rx_filters = (1 << HWTSTAMP_FILTER_NONE) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | - (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) | - (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) | - (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), -}; - const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = { .clock_read = mv88e6352_ptp_clock_read, .ptp_enable = mv88e6352_ptp_enable, @@ -490,7 +444,7 @@ const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops = { (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ), }; -static u64 mv88e6xxx_ptp_clock_read(const struct cyclecounter *cc) +static u64 mv88e6xxx_ptp_clock_read(struct cyclecounter *cc) { struct mv88e6xxx_chip *chip = cc_to_chip(cc); @@ -566,6 +520,10 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) chip->ptp_clock_info.verify = ptp_ops->ptp_verify; chip->ptp_clock_info.do_aux_work = mv88e6xxx_hwtstamp_work; + chip->ptp_clock_info.supported_extts_flags = PTP_RISING_EDGE | + PTP_FALLING_EDGE | + PTP_STRICT_FLAGS; + if (ptp_ops->set_ptp_cpu_port) { struct dsa_port *dp; int upstream = 0; @@ -593,6 +551,7 @@ int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) return 0; } +/* This must never be called holding the register lock */ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip) { if (chip->ptp_clock) { diff --git a/drivers/net/dsa/mv88e6xxx/ptp.h b/drivers/net/dsa/mv88e6xxx/ptp.h index 6c4d09adc93c..95bdddb0bf39 100644 --- a/drivers/net/dsa/mv88e6xxx/ptp.h +++ b/drivers/net/dsa/mv88e6xxx/ptp.h @@ -16,132 +16,56 @@ #include "chip.h" /* Offset 0x00: TAI Global Config */ -#define MV88E6XXX_TAI_CFG 0x00 -#define MV88E6XXX_TAI_CFG_CAP_OVERWRITE 0x8000 -#define MV88E6XXX_TAI_CFG_CAP_CTR_START 0x4000 -#define MV88E6XXX_TAI_CFG_EVREQ_FALLING 0x2000 -#define MV88E6XXX_TAI_CFG_TRIG_ACTIVE_LO 0x1000 -#define MV88E6XXX_TAI_CFG_IRL_ENABLE 0x0400 -#define MV88E6XXX_TAI_CFG_TRIG_IRQ_EN 0x0200 -#define MV88E6XXX_TAI_CFG_EVREQ_IRQ_EN 0x0100 -#define MV88E6XXX_TAI_CFG_TRIG_LOCK 0x0080 -#define MV88E6XXX_TAI_CFG_BLOCK_UPDATE 0x0008 -#define MV88E6XXX_TAI_CFG_MULTI_PTP 0x0004 -#define MV88E6XXX_TAI_CFG_TRIG_MODE_ONESHOT 0x0002 -#define MV88E6XXX_TAI_CFG_TRIG_ENABLE 0x0001 +#define MV88E6352_TAI_CFG 0x00 +#define MV88E6352_TAI_CFG_CAP_OVERWRITE 0x8000 +#define MV88E6352_TAI_CFG_CAP_CTR_START 0x4000 +#define MV88E6352_TAI_CFG_EVREQ_FALLING 0x2000 +#define MV88E6352_TAI_CFG_TRIG_ACTIVE_LO 0x1000 +#define MV88E6352_TAI_CFG_IRL_ENABLE 0x0400 +#define MV88E6352_TAI_CFG_TRIG_IRQ_EN 0x0200 +#define MV88E6352_TAI_CFG_EVREQ_IRQ_EN 0x0100 +#define MV88E6352_TAI_CFG_TRIG_LOCK 0x0080 +#define MV88E6352_TAI_CFG_BLOCK_UPDATE 0x0008 +#define MV88E6352_TAI_CFG_MULTI_PTP 0x0004 +#define MV88E6352_TAI_CFG_TRIG_MODE_ONESHOT 0x0002 +#define MV88E6352_TAI_CFG_TRIG_ENABLE 0x0001 /* Offset 0x01: Timestamp Clock Period (ps) */ #define MV88E6XXX_TAI_CLOCK_PERIOD 0x01 -/* Offset 0x02/0x03: Trigger Generation Amount */ -#define MV88E6XXX_TAI_TRIG_GEN_AMOUNT_LO 0x02 -#define MV88E6XXX_TAI_TRIG_GEN_AMOUNT_HI 0x03 - -/* Offset 0x04: Clock Compensation */ -#define MV88E6XXX_TAI_TRIG_CLOCK_COMP 0x04 - -/* Offset 0x05: Trigger Configuration */ -#define MV88E6XXX_TAI_TRIG_CFG 0x05 - -/* Offset 0x06: Ingress Rate Limiter Clock Generation Amount */ -#define MV88E6XXX_TAI_IRL_AMOUNT 0x06 - -/* Offset 0x07: Ingress Rate Limiter Compensation */ -#define MV88E6XXX_TAI_IRL_COMP 0x07 - -/* Offset 0x08: Ingress Rate Limiter Compensation */ -#define MV88E6XXX_TAI_IRL_COMP_PS 0x08 - /* Offset 0x09: Event Status */ -#define MV88E6XXX_TAI_EVENT_STATUS 0x09 -#define MV88E6XXX_TAI_EVENT_STATUS_CAP_TRIG 0x4000 -#define MV88E6XXX_TAI_EVENT_STATUS_ERROR 0x0200 -#define MV88E6XXX_TAI_EVENT_STATUS_VALID 0x0100 -#define MV88E6XXX_TAI_EVENT_STATUS_CTR_MASK 0x00ff - -/* Offset 0x0A/0x0B: Event Time */ -#define MV88E6XXX_TAI_EVENT_TIME_LO 0x0a -#define MV88E6XXX_TAI_EVENT_TYPE_HI 0x0b +#define MV88E6352_TAI_EVENT_STATUS 0x09 +#define MV88E6352_TAI_EVENT_STATUS_ERROR 0x0200 +#define MV88E6352_TAI_EVENT_STATUS_VALID 0x0100 +#define MV88E6352_TAI_EVENT_STATUS_CTR_MASK 0x00ff +/* Offset 0x0A/0x0B: Event Time Lo/Hi. Always read with Event Status. */ /* Offset 0x0E/0x0F: PTP Global Time */ -#define MV88E6XXX_TAI_TIME_LO 0x0e -#define MV88E6XXX_TAI_TIME_HI 0x0f - -/* Offset 0x10/0x11: Trig Generation Time */ -#define MV88E6XXX_TAI_TRIG_TIME_LO 0x10 -#define MV88E6XXX_TAI_TRIG_TIME_HI 0x11 - -/* Offset 0x12: Lock Status */ -#define MV88E6XXX_TAI_LOCK_STATUS 0x12 - -/* Offset 0x00: Ether Type */ -#define MV88E6XXX_PTP_GC_ETYPE 0x00 +#define MV88E6352_TAI_TIME_LO 0x0e +#define MV88E6352_TAI_TIME_HI 0x0f /* 6165 Global Control Registers */ -/* Offset 0x00: Ether Type */ -#define MV88E6XXX_PTP_GC_ETYPE 0x00 - -/* Offset 0x01: Message ID */ -#define MV88E6XXX_PTP_GC_MESSAGE_ID 0x01 - -/* Offset 0x02: Time Stamp Arrive Time */ -#define MV88E6XXX_PTP_GC_TS_ARR_PTR 0x02 - -/* Offset 0x03: Port Arrival Interrupt Enable */ -#define MV88E6XXX_PTP_GC_PORT_ARR_INT_EN 0x03 - -/* Offset 0x04: Port Departure Interrupt Enable */ -#define MV88E6XXX_PTP_GC_PORT_DEP_INT_EN 0x04 - -/* Offset 0x05: Configuration */ -#define MV88E6XXX_PTP_GC_CONFIG 0x05 -#define MV88E6XXX_PTP_GC_CONFIG_DIS_OVERWRITE BIT(1) -#define MV88E6XXX_PTP_GC_CONFIG_DIS_TS BIT(0) - -/* Offset 0x8: Interrupt Status */ -#define MV88E6XXX_PTP_GC_INT_STATUS 0x08 - /* Offset 0x9/0xa: Global Time */ -#define MV88E6XXX_PTP_GC_TIME_LO 0x09 -#define MV88E6XXX_PTP_GC_TIME_HI 0x0A +#define MV88E6165_PTP_GC_TIME_LO 0x09 +#define MV88E6165_PTP_GC_TIME_HI 0x0A -/* 6165 Per Port Registers */ +/* 6165 Per Port Registers. The arrival and departure registers are a + * common block consisting of status, two time registers and the sequence ID + */ /* Offset 0: Arrival Time 0 Status */ #define MV88E6165_PORT_PTP_ARR0_STS 0x00 -/* Offset 0x01/0x02: PTP Arrival 0 Time */ -#define MV88E6165_PORT_PTP_ARR0_TIME_LO 0x01 -#define MV88E6165_PORT_PTP_ARR0_TIME_HI 0x02 - -/* Offset 0x03: PTP Arrival 0 Sequence ID */ -#define MV88E6165_PORT_PTP_ARR0_SEQID 0x03 - /* Offset 0x04: PTP Arrival 1 Status */ #define MV88E6165_PORT_PTP_ARR1_STS 0x04 -/* Offset 0x05/0x6E: PTP Arrival 1 Time */ -#define MV88E6165_PORT_PTP_ARR1_TIME_LO 0x05 -#define MV88E6165_PORT_PTP_ARR1_TIME_HI 0x06 - -/* Offset 0x07: PTP Arrival 1 Sequence ID */ -#define MV88E6165_PORT_PTP_ARR1_SEQID 0x07 - /* Offset 0x08: PTP Departure Status */ #define MV88E6165_PORT_PTP_DEP_STS 0x08 -/* Offset 0x09/0x0a: PTP Deperture Time */ -#define MV88E6165_PORT_PTP_DEP_TIME_LO 0x09 -#define MV88E6165_PORT_PTP_DEP_TIME_HI 0x0a - -/* Offset 0x0b: PTP Departure Sequence ID */ -#define MV88E6165_PORT_PTP_DEP_SEQID 0x0b - /* Offset 0x0d: Port Status */ #define MV88E6164_PORT_STATUS 0x0d #ifdef CONFIG_NET_DSA_MV88E6XXX_PTP -long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp); int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip); void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip); @@ -149,17 +73,11 @@ void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip); ptp_clock_info) extern const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops; -extern const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops; extern const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops; extern const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops; #else /* !CONFIG_NET_DSA_MV88E6XXX_PTP */ -static inline long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp) -{ - return -1; -} - static inline int mv88e6xxx_ptp_setup(struct mv88e6xxx_chip *chip) { return 0; @@ -170,7 +88,6 @@ static inline void mv88e6xxx_ptp_free(struct mv88e6xxx_chip *chip) } static const struct mv88e6xxx_ptp_ops mv88e6165_ptp_ops = {}; -static const struct mv88e6xxx_ptp_ops mv88e6250_ptp_ops = {}; static const struct mv88e6xxx_ptp_ops mv88e6352_ptp_ops = {}; static const struct mv88e6xxx_ptp_ops mv88e6390_ptp_ops = {}; diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 3aa9c997018a..9e5ede932b42 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -1153,6 +1153,9 @@ static void felix_phylink_get_caps(struct dsa_switch *ds, int port, __set_bit(ocelot->ports[port]->phy_mode, config->supported_interfaces); + if (ocelot->ports[port]->phy_mode == PHY_INTERFACE_MODE_USXGMII) + __set_bit(PHY_INTERFACE_MODE_10G_QXGMII, + config->supported_interfaces); } static void felix_phylink_mac_config(struct phylink_config *config, @@ -1230,6 +1233,7 @@ static int felix_port_enable(struct dsa_switch *ds, int port, { struct dsa_port *dp = dsa_to_port(ds, port); struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); if (!dsa_port_is_user(dp)) return 0; @@ -1243,7 +1247,25 @@ static int felix_port_enable(struct dsa_switch *ds, int port, } } - return 0; + if (!dp->hsr_dev || felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return 0; + + return dsa_port_simple_hsr_join(ds, port, dp->hsr_dev, NULL); +} + +static void felix_port_disable(struct dsa_switch *ds, int port) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (!dsa_port_is_user(dp)) + return; + + if (!dp->hsr_dev || felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return; + + dsa_port_simple_hsr_leave(ds, port, dp->hsr_dev); } static void felix_port_qos_map_init(struct ocelot *ocelot, int port) @@ -1316,6 +1338,14 @@ static void felix_get_eth_phy_stats(struct dsa_switch *ds, int port, ocelot_port_get_eth_phy_stats(ocelot, port, phy_stats); } +static void felix_get_ts_stats(struct dsa_switch *ds, int port, + struct ethtool_ts_stats *ts_stats) +{ + struct ocelot *ocelot = ds->priv; + + ocelot_port_get_ts_stats(ocelot, port, ts_stats); +} + static void felix_get_strings(struct dsa_switch *ds, int port, u32 stringset, u8 *data) { @@ -1351,6 +1381,7 @@ static const u32 felix_phy_match_table[PHY_INTERFACE_MODE_MAX] = { [PHY_INTERFACE_MODE_SGMII] = OCELOT_PORT_MODE_SGMII, [PHY_INTERFACE_MODE_QSGMII] = OCELOT_PORT_MODE_QSGMII, [PHY_INTERFACE_MODE_USXGMII] = OCELOT_PORT_MODE_USXGMII, + [PHY_INTERFACE_MODE_10G_QXGMII] = OCELOT_PORT_MODE_10G_QXGMII, [PHY_INTERFACE_MODE_1000BASEX] = OCELOT_PORT_MODE_1000BASEX, [PHY_INTERFACE_MODE_2500BASEX] = OCELOT_PORT_MODE_2500BASEX, }; @@ -1766,22 +1797,25 @@ static void felix_teardown(struct dsa_switch *ds) } static int felix_hwtstamp_get(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config) { struct ocelot *ocelot = ds->priv; - return ocelot_hwstamp_get(ocelot, port, ifr); + ocelot_hwstamp_get(ocelot, port, config); + + return 0; } static int felix_hwtstamp_set(struct dsa_switch *ds, int port, - struct ifreq *ifr) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct ocelot *ocelot = ds->priv; struct felix *felix = ocelot_to_felix(ocelot); bool using_tag_8021q; int err; - err = ocelot_hwstamp_set(ocelot, port, ifr); + err = ocelot_hwstamp_set(ocelot, port, config, extack); if (err) return err; @@ -2217,6 +2251,52 @@ static void felix_get_mm_stats(struct dsa_switch *ds, int port, ocelot_port_get_mm_stats(ocelot, port, stats); } +/* Depending on port type, we may be able to support the offload later (with + * the "ocelot"/"seville" tagging protocols), or never. + * If we return 0, the dp->hsr_dev reference is kept for later; if we return + * -EOPNOTSUPP, it is cleared (which helps to not bother + * dsa_port_simple_hsr_leave() with an offload that didn't pass validation). + */ +static int felix_port_hsr_join(struct dsa_switch *ds, int port, + struct net_device *hsr, + struct netlink_ext_ack *extack) +{ + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) { + int err; + + err = dsa_port_simple_hsr_validate(ds, port, hsr, extack); + if (err) + return err; + + NL_SET_ERR_MSG_MOD(extack, + "Offloading not supported with \"ocelot-8021q\""); + return 0; + } + + if (!(dsa_to_port(ds, port)->user->flags & IFF_UP)) + return 0; + + return dsa_port_simple_hsr_join(ds, port, hsr, extack); +} + +static int felix_port_hsr_leave(struct dsa_switch *ds, int port, + struct net_device *hsr) +{ + struct ocelot *ocelot = ds->priv; + struct felix *felix = ocelot_to_felix(ocelot); + + if (felix->tag_proto == DSA_TAG_PROTO_OCELOT_8021Q) + return 0; + + if (!(dsa_to_port(ds, port)->user->flags & IFF_UP)) + return 0; + + return dsa_port_simple_hsr_leave(ds, port, hsr); +} + static const struct phylink_mac_ops felix_phylink_mac_ops = { .mac_select_pcs = felix_phylink_mac_select_pcs, .mac_config = felix_phylink_mac_config, @@ -2237,6 +2317,7 @@ static const struct dsa_switch_ops felix_switch_ops = { .get_stats64 = felix_get_stats64, .get_pause_stats = felix_get_pause_stats, .get_rmon_stats = felix_get_rmon_stats, + .get_ts_stats = felix_get_ts_stats, .get_eth_ctrl_stats = felix_get_eth_ctrl_stats, .get_eth_mac_stats = felix_get_eth_mac_stats, .get_eth_phy_stats = felix_get_eth_phy_stats, @@ -2246,6 +2327,7 @@ static const struct dsa_switch_ops felix_switch_ops = { .get_ts_info = felix_get_ts_info, .phylink_get_caps = felix_phylink_get_caps, .port_enable = felix_port_enable, + .port_disable = felix_port_disable, .port_fast_age = felix_port_fast_age, .port_fdb_dump = felix_fdb_dump, .port_fdb_add = felix_fdb_add, @@ -2302,6 +2384,8 @@ static const struct dsa_switch_ops felix_switch_ops = { .port_del_dscp_prio = felix_port_del_dscp_prio, .port_set_host_flood = felix_port_set_host_flood, .port_change_conduit = felix_port_change_conduit, + .port_hsr_join = felix_port_hsr_join, + .port_hsr_leave = felix_port_hsr_leave, }; int felix_register_switch(struct device *dev, resource_size_t switch_base, diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h index 211991f494e3..a657b190c5d7 100644 --- a/drivers/net/dsa/ocelot/felix.h +++ b/drivers/net/dsa/ocelot/felix.h @@ -12,8 +12,9 @@ #define OCELOT_PORT_MODE_SGMII BIT(1) #define OCELOT_PORT_MODE_QSGMII BIT(2) #define OCELOT_PORT_MODE_2500BASEX BIT(3) -#define OCELOT_PORT_MODE_USXGMII BIT(4) +#define OCELOT_PORT_MODE_USXGMII BIT(4) /* compatibility */ #define OCELOT_PORT_MODE_1000BASEX BIT(5) +#define OCELOT_PORT_MODE_10G_QXGMII BIT(6) struct device_node; diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c index 0102a82e88cc..8cf4c8986587 100644 --- a/drivers/net/dsa/ocelot/felix_vsc9959.c +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c @@ -24,7 +24,7 @@ #define VSC9959_NUM_PORTS 6 #define VSC9959_TAS_GCL_ENTRY_MAX 63 -#define VSC9959_TAS_MIN_GATE_LEN_NS 33 +#define VSC9959_TAS_MIN_GATE_LEN_NS 35 #define VSC9959_VCAP_POLICER_BASE 63 #define VSC9959_VCAP_POLICER_MAX 383 #define VSC9959_SWITCH_PCI_BAR 4 @@ -34,7 +34,8 @@ OCELOT_PORT_MODE_QSGMII | \ OCELOT_PORT_MODE_1000BASEX | \ OCELOT_PORT_MODE_2500BASEX | \ - OCELOT_PORT_MODE_USXGMII) + OCELOT_PORT_MODE_USXGMII | \ + OCELOT_PORT_MODE_10G_QXGMII) static const u32 vsc9959_port_modes[VSC9959_NUM_PORTS] = { VSC9959_PORT_MODE_SERDES, @@ -1056,11 +1057,15 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot) mdiobus_free(felix->imdio); } -/* The switch considers any frame (regardless of size) as eligible for - * transmission if the traffic class gate is open for at least 33 ns. +/* The switch considers any frame (regardless of size) as eligible + * for transmission if the traffic class gate is open for at least + * VSC9959_TAS_MIN_GATE_LEN_NS. + * * Overruns are prevented by cropping an interval at the end of the gate time - * slot for which egress scheduling is blocked, but we need to still keep 33 ns - * available for one packet to be transmitted, otherwise the port tc will hang. + * slot for which egress scheduling is blocked, but we need to still keep + * VSC9959_TAS_MIN_GATE_LEN_NS available for one packet to be transmitted, + * otherwise the port tc will hang. + * * This function returns the size of a gate interval that remains available for * setting the guard band, after reserving the space for one egress frame. */ @@ -1303,7 +1308,8 @@ static void vsc9959_tas_guard_bands_update(struct ocelot *ocelot, int port) * per-tc static guard band lengths, so it reduces the * useful gate interval length. Therefore, be careful * to calculate a guard band (and therefore max_sdu) - * that still leaves 33 ns available in the time slot. + * that still leaves VSC9959_TAS_MIN_GATE_LEN_NS + * available in the time slot. */ max_sdu = div_u64(remaining_gate_len_ps, picos_per_byte); /* A TC gate may be completely closed, which is a @@ -1538,7 +1544,7 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot) struct tc_taprio_qopt_offload *taprio; struct ocelot_port *ocelot_port; struct timespec64 base_ts; - int port; + int i, port; u32 val; mutex_lock(&ocelot->fwd_domain_lock); @@ -1570,6 +1576,9 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot) QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M, QSYS_PARAM_CFG_REG_3); + for (i = 0; i < taprio->num_entries; i++) + vsc9959_tas_gcl_set(ocelot, i, &taprio->entries[i]); + ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE, QSYS_TAS_PARAM_CFG_CTRL); diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c index 450bda18ef37..d5c557a20292 100644 --- a/drivers/net/dsa/ocelot/ocelot_ext.c +++ b/drivers/net/dsa/ocelot/ocelot_ext.c @@ -109,4 +109,4 @@ module_platform_driver(ocelot_ext_switch_driver); MODULE_DESCRIPTION("External Ocelot Switch driver"); MODULE_LICENSE("GPL"); -MODULE_IMPORT_NS(MFD_OCELOT); +MODULE_IMPORT_NS("MFD_OCELOT"); diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index e9f2c67bc15f..0526aa96146e 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -821,8 +821,8 @@ static int ar9331_sw_irq_init(struct ar9331_sw_priv *priv) return ret; } - priv->irqdomain = irq_domain_add_linear(np, 1, &ar9331_sw_irqdomain_ops, - priv); + priv->irqdomain = irq_domain_create_linear(dev_fwnode(dev), 1, &ar9331_sw_irqdomain_ops, + priv); if (!priv->irqdomain) { dev_err(dev, "failed to create IRQ domain\n"); return -EINVAL; diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index 59b4a7240b58..a36b8b07030e 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -342,7 +342,7 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, - msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + QCA8K_ETHERNET_TIMEOUT); *val = mgmt_eth_data->data[0]; if (len > QCA_HDR_MGMT_DATA1_LEN) @@ -394,7 +394,7 @@ static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len) dev_queue_xmit(skb); ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done, - msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT)); + QCA8K_ETHERNET_TIMEOUT); ack = mgmt_eth_data->ack; @@ -1019,7 +1019,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) of_get_phy_mode(port, &mode); - if (of_property_read_bool(port, "phy-handle") && + if (of_property_present(port, "phy-handle") && mode != PHY_INTERFACE_MODE_INTERNAL) external_mdio_mask |= BIT(reg); else @@ -1491,7 +1491,7 @@ static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) return container_of(pcs, struct qca8k_pcs, pcs); } -static void qca8k_pcs_get_state(struct phylink_pcs *pcs, +static void qca8k_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode, struct phylink_link_state *state) { struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; @@ -1634,7 +1634,6 @@ static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs, int port) { qpcs->pcs.ops = &qca8k_pcs_ops; - qpcs->pcs.neg_mode = true; /* We don't have interrupts for link changes, so we need to poll */ qpcs->pcs.poll = true; @@ -2016,7 +2015,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = { .get_ethtool_stats = qca8k_get_ethtool_stats, .get_sset_count = qca8k_get_sset_count, .set_ageing_time = qca8k_set_ageing_time, - .get_mac_eee = qca8k_get_mac_eee, + .support_eee = dsa_supports_eee, .set_mac_eee = qca8k_set_mac_eee, .port_enable = qca8k_port_enable, .port_disable = qca8k_port_disable, diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c index 560c74c4ac3d..13005f10edb7 100644 --- a/drivers/net/dsa/qca/qca8k-common.c +++ b/drivers/net/dsa/qca/qca8k-common.c @@ -557,13 +557,6 @@ exit: return ret; } -int qca8k_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_keee *e) -{ - /* Nothing to do on the port's MAC */ - return 0; -} - static int qca8k_port_configure_learning(struct dsa_switch *ds, int port, bool learning) { diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h index 3664a2e2f1f6..d046679265fa 100644 --- a/drivers/net/dsa/qca/qca8k.h +++ b/drivers/net/dsa/qca/qca8k.h @@ -16,7 +16,7 @@ #define QCA8K_ETHERNET_MDIO_PRIORITY 7 #define QCA8K_ETHERNET_PHY_PRIORITY 6 -#define QCA8K_ETHERNET_TIMEOUT 5 +#define QCA8K_ETHERNET_TIMEOUT msecs_to_jiffies(5) #define QCA8K_NUM_PORTS 7 #define QCA8K_NUM_CPU_PORTS 2 @@ -520,7 +520,6 @@ int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset); /* Common eee function */ int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *eee); -int qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e); /* Common bridge function */ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state); diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig index 6989972eebc3..d6eb6713e5f6 100644 --- a/drivers/net/dsa/realtek/Kconfig +++ b/drivers/net/dsa/realtek/Kconfig @@ -43,4 +43,10 @@ config NET_DSA_REALTEK_RTL8366RB help Select to enable support for Realtek RTL8366RB. +config NET_DSA_REALTEK_RTL8366RB_LEDS + bool + depends on (LEDS_CLASS=y || LEDS_CLASS=NET_DSA_REALTEK_RTL8366RB) + depends on NET_DSA_REALTEK_RTL8366RB + default NET_DSA_REALTEK_RTL8366RB + endif diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 35491dc20d6d..17367bcba496 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -12,4 +12,7 @@ endif obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o rtl8366-objs := rtl8366-core.o rtl8366rb.o +ifdef CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS +rtl8366-objs += rtl8366rb-leds.o +endif obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 5f545dda702b..a5e7dff96e91 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -140,7 +140,7 @@ int realtek_mdio_probe(struct mdio_device *mdiodev) return 0; } -EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, "REALTEK_DSA"); /** * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch @@ -163,7 +163,7 @@ void realtek_mdio_remove(struct mdio_device *mdiodev) rtl83xx_remove(priv); } -EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, "REALTEK_DSA"); /** * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch @@ -184,4 +184,4 @@ void realtek_mdio_shutdown(struct mdio_device *mdiodev) rtl83xx_shutdown(priv); } -EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c index d750bddf27b4..972e22218418 100644 --- a/drivers/net/dsa/realtek/realtek-smi.c +++ b/drivers/net/dsa/realtek/realtek-smi.c @@ -361,7 +361,7 @@ int realtek_smi_probe(struct platform_device *pdev) return 0; } -EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_smi_probe, "REALTEK_DSA"); /** * realtek_smi_remove() - Remove the driver of a SMI-connected switch @@ -384,7 +384,7 @@ void realtek_smi_remove(struct platform_device *pdev) rtl83xx_remove(priv); } -EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_smi_remove, "REALTEK_DSA"); /** * realtek_smi_shutdown() - Shutdown the driver of a SMI-connected switch @@ -405,4 +405,4 @@ void realtek_smi_shutdown(struct platform_device *pdev) rtl83xx_shutdown(priv); } -EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(realtek_smi_shutdown, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h index a1b2e0b529d5..c03485a80d93 100644 --- a/drivers/net/dsa/realtek/realtek.h +++ b/drivers/net/dsa/realtek/realtek.h @@ -19,9 +19,6 @@ struct phylink_mac_ops; struct realtek_ops; -struct dentry; -struct inode; -struct file; struct rtl8366_mib_counter { unsigned int base; diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index 6b9dbdb00941..c575e164368c 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -1719,8 +1719,8 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv) goto out_put_node; } - priv->irqdomain = irq_domain_add_linear(intc, priv->num_ports, - &rtl8365mb_irqdomain_ops, priv); + priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), priv->num_ports, + &rtl8365mb_irqdomain_ops, priv); if (!priv->irqdomain) { dev_err(priv->dev, "failed to add irq domain\n"); ret = -ENOMEM; @@ -2134,6 +2134,8 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops = { .get_stats64 = rtl8365mb_get_stats64, .port_change_mtu = rtl8365mb_port_change_mtu, .port_max_mtu = rtl8365mb_port_max_mtu, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static const struct realtek_ops rtl8365mb_ops = { @@ -2206,4 +2208,4 @@ module_exit(rtl8365mb_exit); MODULE_AUTHOR("Alvin Å ipraga <alsi@bang-olufsen.dk>"); MODULE_DESCRIPTION("Driver for RTL8365MB-VC ethernet switch"); MODULE_LICENSE("GPL"); -MODULE_IMPORT_NS(REALTEK_DSA); +MODULE_IMPORT_NS("REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c index 7c6520ba3a26..047feeed96a2 100644 --- a/drivers/net/dsa/realtek/rtl8366-core.c +++ b/drivers/net/dsa/realtek/rtl8366-core.c @@ -34,7 +34,7 @@ int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used) return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_mc_is_used, "REALTEK_DSA"); /** * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration @@ -187,7 +187,7 @@ int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member, return ret; } -EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_vlan, "REALTEK_DSA"); int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, unsigned int vid) @@ -217,7 +217,7 @@ int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port, return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_set_pvid, "REALTEK_DSA"); int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) { @@ -243,7 +243,7 @@ int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable) priv->vlan4k_enabled = enable; return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan4k, "REALTEK_DSA"); int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) { @@ -265,7 +265,7 @@ int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable) return ret; } -EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_enable_vlan, "REALTEK_DSA"); int rtl8366_reset_vlan(struct realtek_priv *priv) { @@ -290,7 +290,7 @@ int rtl8366_reset_vlan(struct realtek_priv *priv) return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_reset_vlan, "REALTEK_DSA"); int rtl8366_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, @@ -345,7 +345,7 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_add, "REALTEK_DSA"); int rtl8366_vlan_del(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) @@ -389,7 +389,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port, return 0; } -EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_vlan_del, "REALTEK_DSA"); void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) @@ -403,7 +403,7 @@ void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, for (i = 0; i < priv->num_mib_counters; i++) ethtool_puts(&data, priv->mib_counters[i].name); } -EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_strings, "REALTEK_DSA"); int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) { @@ -417,7 +417,7 @@ int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) return priv->num_mib_counters; } -EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_sset_count, "REALTEK_DSA"); void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) { @@ -441,4 +441,4 @@ void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) data[i] = mibvalue; } } -EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl8366_get_ethtool_stats, "REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366rb-leds.c b/drivers/net/dsa/realtek/rtl8366rb-leds.c new file mode 100644 index 000000000000..99c890681ae6 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb-leds.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <net/dsa.h> +#include "rtl83xx.h" +#include "rtl8366rb.h" + +static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) +{ + switch (led_group) { + case 0: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 1: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 2: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 3: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + default: + return 0; + } +} + +static int rb8366rb_get_port_led(struct rtl8366rb_led *led) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + u32 val; + + ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), + &val); + if (ret) { + dev_err(priv->dev, "error reading LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); +} + +static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_X_X_CTRL_REG(led_group), + rtl8366rb_led_group_port_mask(led_group, + port_num), + enable ? 0xffff : 0); + if (ret) { + dev_err(priv->dev, "error updating LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + /* Change the LED group to manual controlled LEDs if required */ + ret = rb8366rb_set_ledgroup_mode(priv, led_group, + RTL8366RB_LEDGROUP_FORCE); + + if (ret) { + dev_err(priv->dev, "error updating LED GROUP group %d\n", + led_group); + return ret; + } + + return 0; +} + +static int +rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, + cdev); + + return rb8366rb_set_port_led(led, brightness == LED_ON); +} + +static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, + struct fwnode_handle *led_fwnode) +{ + struct rtl8366rb *rb = priv->chip_data; + struct led_init_data init_data = { }; + enum led_default_state state; + struct rtl8366rb_led *led; + u32 led_group; + int ret; + + ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); + if (ret) + return ret; + + if (led_group >= RTL8366RB_NUM_LEDGROUPS) { + dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", + led_group, dp->index); + return -EINVAL; + } + + led = &rb->leds[dp->index][led_group]; + led->port_num = dp->index; + led->led_group = led_group; + led->priv = priv; + + state = led_init_default_state_get(led_fwnode); + switch (state) { + case LEDS_DEFSTATE_ON: + led->cdev.brightness = 1; + rb8366rb_set_port_led(led, 1); + break; + case LEDS_DEFSTATE_KEEP: + led->cdev.brightness = + rb8366rb_get_port_led(led); + break; + case LEDS_DEFSTATE_OFF: + default: + led->cdev.brightness = 0; + rb8366rb_set_port_led(led, 0); + } + + led->cdev.max_brightness = 1; + led->cdev.brightness_set_blocking = + rtl8366rb_cled_brightness_set_blocking; + init_data.fwnode = led_fwnode; + init_data.devname_mandatory = true; + + init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", + dp->ds->index, dp->index, led_group); + if (!init_data.devicename) + return -ENOMEM; + + ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); + if (ret) { + dev_warn(priv->dev, "Failed to init LED %d for port %d", + led_group, dp->index); + return ret; + } + + return 0; +} + +int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + struct device_node *leds_np; + struct dsa_port *dp; + int ret = 0; + + dsa_switch_for_each_port(dp, ds) { + if (!dp->dn) + continue; + + leds_np = of_get_child_by_name(dp->dn, "leds"); + if (!leds_np) { + dev_dbg(priv->dev, "No leds defined for port %d", + dp->index); + continue; + } + + for_each_child_of_node_scoped(leds_np, led_np) { + ret = rtl8366rb_setup_led(priv, dp, + of_fwnode_handle(led_np)); + if (ret) + break; + } + + of_node_put(leds_np); + if (ret) + return ret; + } + return 0; +} diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index 6ba03f81c882..d96ae72b0a5c 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -21,16 +21,13 @@ #include <linux/irqchip/chained_irq.h> #include <linux/of_irq.h> #include <linux/regmap.h> +#include <linux/string_choices.h> #include "realtek.h" #include "realtek-smi.h" #include "realtek-mdio.h" #include "rtl83xx.h" - -#define RTL8366RB_PORT_NUM_CPU 5 -#define RTL8366RB_NUM_PORTS 6 -#define RTL8366RB_PHY_NO_MAX 4 -#define RTL8366RB_PHY_ADDR_MAX 31 +#include "rtl8366rb.h" /* Switch Global Configuration register */ #define RTL8366RB_SGCR 0x0000 @@ -175,39 +172,6 @@ */ #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f -/* LED control registers */ -/* The LED blink rate is global; it is used by all triggers in all groups. */ -#define RTL8366RB_LED_BLINKRATE_REG 0x0430 -#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 -#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 -#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 -#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 -#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 -#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 -#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 - -/* LED trigger event for each group */ -#define RTL8366RB_LED_CTRL_REG 0x0431 -#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ - (4 * (led_group)) -#define RTL8366RB_LED_CTRL_MASK(led_group) \ - (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) - -/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only - * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is - * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. - */ -#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 -#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 -#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ - ((led_group) <= 1 ? \ - RTL8366RB_LED_0_1_CTRL_REG : \ - RTL8366RB_LED_2_3_CTRL_REG) -#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) -#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) - #define RTL8366RB_MIB_COUNT 33 #define RTL8366RB_GLOBAL_MIB_COUNT 1 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 @@ -243,7 +207,6 @@ #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 #define RTL8366RB_NUM_VLANS 16 -#define RTL8366RB_NUM_LEDGROUPS 4 #define RTL8366RB_NUM_VIDS 4096 #define RTL8366RB_PRIORITYMAX 7 #define RTL8366RB_NUM_FIDS 8 @@ -350,46 +313,6 @@ #define RTL8366RB_GREEN_FEATURE_TX BIT(0) #define RTL8366RB_GREEN_FEATURE_RX BIT(2) -enum rtl8366_ledgroup_mode { - RTL8366RB_LEDGROUP_OFF = 0x0, - RTL8366RB_LEDGROUP_DUP_COL = 0x1, - RTL8366RB_LEDGROUP_LINK_ACT = 0x2, - RTL8366RB_LEDGROUP_SPD1000 = 0x3, - RTL8366RB_LEDGROUP_SPD100 = 0x4, - RTL8366RB_LEDGROUP_SPD10 = 0x5, - RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, - RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, - RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, - RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, - RTL8366RB_LEDGROUP_FIBER = 0xa, - RTL8366RB_LEDGROUP_AN_FAULT = 0xb, - RTL8366RB_LEDGROUP_LINK_RX = 0xc, - RTL8366RB_LEDGROUP_LINK_TX = 0xd, - RTL8366RB_LEDGROUP_MASTER = 0xe, - RTL8366RB_LEDGROUP_FORCE = 0xf, - - __RTL8366RB_LEDGROUP_MODE_MAX -}; - -struct rtl8366rb_led { - u8 port_num; - u8 led_group; - struct realtek_priv *priv; - struct led_classdev cdev; -}; - -/** - * struct rtl8366rb - RTL8366RB-specific data - * @max_mtu: per-port max MTU setting - * @pvid_enabled: if PVID is set for respective port - * @leds: per-port and per-ledgroup led info - */ -struct rtl8366rb { - unsigned int max_mtu[RTL8366RB_NUM_PORTS]; - bool pvid_enabled[RTL8366RB_NUM_PORTS]; - struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; -}; - static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { { 0, 0, 4, "IfInOctets" }, { 0, 4, 4, "EtherStatsOctets" }, @@ -627,10 +550,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv) dev_err(priv->dev, "unable to request irq: %d\n", ret); goto out_put_node; } - priv->irqdomain = irq_domain_add_linear(intc, - RTL8366RB_NUM_INTERRUPT, - &rtl8366rb_irqdomain_ops, - priv); + priv->irqdomain = irq_domain_create_linear(of_fwnode_handle(intc), RTL8366RB_NUM_INTERRUPT, + &rtl8366rb_irqdomain_ops, priv); if (!priv->irqdomain) { dev_err(priv->dev, "failed to create IRQ domain\n"); ret = -EINVAL; @@ -830,9 +751,10 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, return 0; } -static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, - u8 led_group, - enum rtl8366_ledgroup_mode mode) +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode) { int ret; u32 val; @@ -849,144 +771,7 @@ static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, return 0; } -static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) -{ - switch (led_group) { - case 0: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 1: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 2: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 3: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - default: - return 0; - } -} - -static int rb8366rb_get_port_led(struct rtl8366rb_led *led) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - u32 val; - - ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), - &val); - if (ret) { - dev_err(priv->dev, "error reading LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); -} - -static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_X_X_CTRL_REG(led_group), - rtl8366rb_led_group_port_mask(led_group, - port_num), - enable ? 0xffff : 0); - if (ret) { - dev_err(priv->dev, "error updating LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - /* Change the LED group to manual controlled LEDs if required */ - ret = rb8366rb_set_ledgroup_mode(priv, led_group, - RTL8366RB_LEDGROUP_FORCE); - - if (ret) { - dev_err(priv->dev, "error updating LED GROUP group %d\n", - led_group); - return ret; - } - - return 0; -} - -static int -rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, - enum led_brightness brightness) -{ - struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, - cdev); - - return rb8366rb_set_port_led(led, brightness == LED_ON); -} - -static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, - struct fwnode_handle *led_fwnode) -{ - struct rtl8366rb *rb = priv->chip_data; - struct led_init_data init_data = { }; - enum led_default_state state; - struct rtl8366rb_led *led; - u32 led_group; - int ret; - - ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); - if (ret) - return ret; - - if (led_group >= RTL8366RB_NUM_LEDGROUPS) { - dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", - led_group, dp->index); - return -EINVAL; - } - - led = &rb->leds[dp->index][led_group]; - led->port_num = dp->index; - led->led_group = led_group; - led->priv = priv; - - state = led_init_default_state_get(led_fwnode); - switch (state) { - case LEDS_DEFSTATE_ON: - led->cdev.brightness = 1; - rb8366rb_set_port_led(led, 1); - break; - case LEDS_DEFSTATE_KEEP: - led->cdev.brightness = - rb8366rb_get_port_led(led); - break; - case LEDS_DEFSTATE_OFF: - default: - led->cdev.brightness = 0; - rb8366rb_set_port_led(led, 0); - } - - led->cdev.max_brightness = 1; - led->cdev.brightness_set_blocking = - rtl8366rb_cled_brightness_set_blocking; - init_data.fwnode = led_fwnode; - init_data.devname_mandatory = true; - - init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", - dp->ds->index, dp->index, led_group); - if (!init_data.devicename) - return -ENOMEM; - - ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); - if (ret) { - dev_warn(priv->dev, "Failed to init LED %d for port %d", - led_group, dp->index); - return ret; - } - - return 0; -} - +/* This code is used also with LEDs disabled */ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) { int ret = 0; @@ -1007,38 +792,6 @@ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) return ret; } -static int rtl8366rb_setup_leds(struct realtek_priv *priv) -{ - struct dsa_switch *ds = &priv->ds; - struct device_node *leds_np; - struct dsa_port *dp; - int ret = 0; - - dsa_switch_for_each_port(dp, ds) { - if (!dp->dn) - continue; - - leds_np = of_get_child_by_name(dp->dn, "leds"); - if (!leds_np) { - dev_dbg(priv->dev, "No leds defined for port %d", - dp->index); - continue; - } - - for_each_child_of_node_scoped(leds_np, led_np) { - ret = rtl8366rb_setup_led(priv, dp, - of_fwnode_handle(led_np)); - if (ret) - break; - } - - of_node_put(leds_np); - if (ret) - return ret; - } - return 0; -} - static int rtl8366rb_setup(struct dsa_switch *ds) { struct realtek_priv *priv = ds->priv; @@ -1522,7 +1275,7 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, rb = priv->chip_data; dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port, - vlan_filtering ? "enable" : "disable"); + str_enable_disable(vlan_filtering)); /* If the port is not in the member set, the frame will be dropped */ ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, @@ -1884,7 +1637,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, enable ? RTL8366RB_SGCR_EN_VLAN : 0); @@ -1892,7 +1645,7 @@ static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable) { - dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); + dev_dbg(priv->dev, "%s VLAN 4k\n", str_enable_disable(enable)); return regmap_update_bits(priv->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN_4KTB, enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); @@ -2062,6 +1815,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = { .port_fast_age = rtl8366rb_port_fast_age, .port_change_mtu = rtl8366rb_change_mtu, .port_max_mtu = rtl8366rb_max_mtu, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static const struct realtek_ops rtl8366rb_ops = { @@ -2144,4 +1899,4 @@ module_exit(rtl8366rb_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); MODULE_LICENSE("GPL"); -MODULE_IMPORT_NS(REALTEK_DSA); +MODULE_IMPORT_NS("REALTEK_DSA"); diff --git a/drivers/net/dsa/realtek/rtl8366rb.h b/drivers/net/dsa/realtek/rtl8366rb.h new file mode 100644 index 000000000000..685ff3275faa --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL8366RB_H +#define _RTL8366RB_H + +#include "realtek.h" + +#define RTL8366RB_PORT_NUM_CPU 5 +#define RTL8366RB_NUM_PORTS 6 +#define RTL8366RB_PHY_NO_MAX 4 +#define RTL8366RB_NUM_LEDGROUPS 4 +#define RTL8366RB_PHY_ADDR_MAX 31 + +/* LED control registers */ +/* The LED blink rate is global; it is used by all triggers in all groups. */ +#define RTL8366RB_LED_BLINKRATE_REG 0x0430 +#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 +#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 +#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 +#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 +#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 +#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 +#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 + +/* LED trigger event for each group */ +#define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ + (4 * (led_group)) +#define RTL8366RB_LED_CTRL_MASK(led_group) \ + (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) + +/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only + * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is + * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. + */ +#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 +#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 +#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ + ((led_group) <= 1 ? \ + RTL8366RB_LED_0_1_CTRL_REG : \ + RTL8366RB_LED_2_3_CTRL_REG) +#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) +#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) + +enum rtl8366_ledgroup_mode { + RTL8366RB_LEDGROUP_OFF = 0x0, + RTL8366RB_LEDGROUP_DUP_COL = 0x1, + RTL8366RB_LEDGROUP_LINK_ACT = 0x2, + RTL8366RB_LEDGROUP_SPD1000 = 0x3, + RTL8366RB_LEDGROUP_SPD100 = 0x4, + RTL8366RB_LEDGROUP_SPD10 = 0x5, + RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, + RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, + RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, + RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, + RTL8366RB_LEDGROUP_FIBER = 0xa, + RTL8366RB_LEDGROUP_AN_FAULT = 0xb, + RTL8366RB_LEDGROUP_LINK_RX = 0xc, + RTL8366RB_LEDGROUP_LINK_TX = 0xd, + RTL8366RB_LEDGROUP_MASTER = 0xe, + RTL8366RB_LEDGROUP_FORCE = 0xf, + + __RTL8366RB_LEDGROUP_MODE_MAX +}; + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + +struct rtl8366rb_led { + u8 port_num; + u8 led_group; + struct realtek_priv *priv; + struct led_classdev cdev; +}; + +int rtl8366rb_setup_leds(struct realtek_priv *priv); + +#else + +static inline int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + return 0; +} + +#endif /* IS_ENABLED(CONFIG_LEDS_CLASS) */ + +/** + * struct rtl8366rb - RTL8366RB-specific data + * @max_mtu: per-port max MTU setting + * @pvid_enabled: if PVID is set for respective port + * @leds: per-port and per-ledgroup led info + */ +struct rtl8366rb { + unsigned int max_mtu[RTL8366RB_NUM_PORTS]; + bool pvid_enabled[RTL8366RB_NUM_PORTS]; +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; +#endif +}; + +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode); + +#endif /* _RTL8366RB_H */ diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c index 3c5018d5e1f9..2b9bd4462714 100644 --- a/drivers/net/dsa/realtek/rtl83xx.c +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -25,7 +25,7 @@ void rtl83xx_lock(void *ctx) mutex_lock(&priv->map_lock); } -EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_lock, "REALTEK_DSA"); /** * rtl83xx_unlock() - Unlocks the mutex used by regmaps @@ -42,7 +42,7 @@ void rtl83xx_unlock(void *ctx) mutex_unlock(&priv->map_lock); } -EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_unlock, "REALTEK_DSA"); static int rtl83xx_user_mdio_read(struct mii_bus *bus, int addr, int regnum) { @@ -109,7 +109,7 @@ err_put_node: return ret; } -EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_setup_user_mdio, "REALTEK_DSA"); /** * rtl83xx_probe() - probe a Realtek switch @@ -208,7 +208,7 @@ rtl83xx_probe(struct device *dev, return priv; } -EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_probe, "REALTEK_DSA"); /** * rtl83xx_register_switch() - detects and register a switch @@ -245,7 +245,7 @@ int rtl83xx_register_switch(struct realtek_priv *priv) return 0; } -EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, "REALTEK_DSA"); /** * rtl83xx_unregister_switch() - unregister a switch @@ -262,7 +262,7 @@ void rtl83xx_unregister_switch(struct realtek_priv *priv) dsa_unregister_switch(ds); } -EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, "REALTEK_DSA"); /** * rtl83xx_shutdown() - shutdown a switch @@ -283,7 +283,7 @@ void rtl83xx_shutdown(struct realtek_priv *priv) dev_set_drvdata(priv->dev, NULL); } -EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, "REALTEK_DSA"); /** * rtl83xx_remove() - Cleanup a realtek switch driver @@ -297,7 +297,7 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA); void rtl83xx_remove(struct realtek_priv *priv) { } -EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA); +EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, "REALTEK_DSA"); void rtl83xx_reset_assert(struct realtek_priv *priv) { diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c index 66974379334a..4d857e3be10b 100644 --- a/drivers/net/dsa/rzn1_a5psw.c +++ b/drivers/net/dsa/rzn1_a5psw.c @@ -337,8 +337,9 @@ static void a5psw_port_rx_block_set(struct a5psw *a5psw, int port, bool block) static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port, bool set) { - u8 offsets[] = {A5PSW_UCAST_DEF_MASK, A5PSW_BCAST_DEF_MASK, - A5PSW_MCAST_DEF_MASK}; + static const u8 offsets[] = { + A5PSW_UCAST_DEF_MASK, A5PSW_BCAST_DEF_MASK, A5PSW_MCAST_DEF_MASK + }; int i; for (i = 0; i < ARRAY_SIZE(offsets); i++) @@ -1034,6 +1035,8 @@ static const struct dsa_switch_ops a5psw_switch_ops = { .port_fdb_add = a5psw_port_fdb_add, .port_fdb_del = a5psw_port_fdb_del, .port_fdb_dump = a5psw_port_fdb_dump, + .port_hsr_join = dsa_port_simple_hsr_join, + .port_hsr_leave = dsa_port_simple_hsr_leave, }; static int a5psw_mdio_wait_busy(struct a5psw *a5psw) @@ -1226,40 +1229,30 @@ static int a5psw_probe(struct platform_device *pdev) if (ret) return ret; - a5psw->hclk = devm_clk_get(dev, "hclk"); + a5psw->hclk = devm_clk_get_enabled(dev, "hclk"); if (IS_ERR(a5psw->hclk)) { dev_err(dev, "failed get hclk clock\n"); ret = PTR_ERR(a5psw->hclk); goto free_pcs; } - a5psw->clk = devm_clk_get(dev, "clk"); + a5psw->clk = devm_clk_get_enabled(dev, "clk"); if (IS_ERR(a5psw->clk)) { dev_err(dev, "failed get clk_switch clock\n"); ret = PTR_ERR(a5psw->clk); goto free_pcs; } - ret = clk_prepare_enable(a5psw->clk); - if (ret) - goto free_pcs; - - ret = clk_prepare_enable(a5psw->hclk); - if (ret) - goto clk_disable; - - mdio = of_get_child_by_name(dev->of_node, "mdio"); - if (of_device_is_available(mdio)) { + mdio = of_get_available_child_by_name(dev->of_node, "mdio"); + if (mdio) { ret = a5psw_probe_mdio(a5psw, mdio); + of_node_put(mdio); if (ret) { - of_node_put(mdio); dev_err(dev, "Failed to register MDIO: %d\n", ret); - goto hclk_disable; + goto free_pcs; } } - of_node_put(mdio); - ds = &a5psw->ds; ds->dev = dev; ds->num_ports = A5PSW_PORTS_NUM; @@ -1270,15 +1263,11 @@ static int a5psw_probe(struct platform_device *pdev) ret = dsa_register_switch(ds); if (ret) { dev_err(dev, "Failed to register DSA switch: %d\n", ret); - goto hclk_disable; + goto free_pcs; } return 0; -hclk_disable: - clk_disable_unprepare(a5psw->hclk); -clk_disable: - clk_disable_unprepare(a5psw->clk); free_pcs: a5psw_pcs_free(a5psw); @@ -1294,8 +1283,6 @@ static void a5psw_remove(struct platform_device *pdev) dsa_unregister_switch(&a5psw->ds); a5psw_pcs_free(a5psw); - clk_disable_unprepare(a5psw->hclk); - clk_disable_unprepare(a5psw->clk); } static void a5psw_shutdown(struct platform_device *pdev) diff --git a/drivers/net/dsa/sja1105/sja1105_ethtool.c b/drivers/net/dsa/sja1105/sja1105_ethtool.c index 2ea64b1d026d..84d7d3f66bd0 100644 --- a/drivers/net/dsa/sja1105/sja1105_ethtool.c +++ b/drivers/net/dsa/sja1105/sja1105_ethtool.c @@ -571,6 +571,9 @@ void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; for (i = 0; i < max_ctr; i++) { + if (!strlen(sja1105_port_counters[i].name)) + continue; + rc = sja1105_port_counter_read(priv, port, i, &data[k++]); if (rc) { dev_err(ds->dev, @@ -596,8 +599,12 @@ void sja1105_get_strings(struct dsa_switch *ds, int port, else max_ctr = __MAX_SJA1105PQRS_PORT_COUNTER; - for (i = 0; i < max_ctr; i++) + for (i = 0; i < max_ctr; i++) { + if (!strlen(sja1105_port_counters[i].name)) + continue; + ethtool_puts(&data, sja1105_port_counters[i].name); + } } int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index f8454f3b6f9c..aa2145cf29a6 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1302,14 +1302,7 @@ static int sja1105_set_port_speed(struct sja1105_private *priv, int port, * table, since this will be used for the clocking setup, and we no * longer need to store it in the static config (already told hardware * we want auto during upload phase). - * Actually for the SGMII port, the MAC is fixed at 1 Gbps and - * we need to configure the PCS only (if even that). */ - if (priv->phy_mode[port] == PHY_INTERFACE_MODE_SGMII) - speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS]; - else if (priv->phy_mode[port] == PHY_INTERFACE_MODE_2500BASEX) - speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS]; - mac[port].speed = speed; return 0; @@ -2081,6 +2074,7 @@ static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, switch (state) { case BR_STATE_DISABLED: case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: /* From UM10944 description of DRPDTAG (why put this there?): * "Management traffic flows to the port regardless of the state * of the INGRESS flag". So BPDUs are still be allowed to pass. @@ -2090,11 +2084,6 @@ static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, mac[port].egress = false; mac[port].dyn_learn = false; break; - case BR_STATE_LISTENING: - mac[port].ingress = true; - mac[port].egress = false; - mac[port].dyn_learn = false; - break; case BR_STATE_LEARNING: mac[port].ingress = true; mac[port].egress = false; diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c index 84b7169f2974..8d535c033cef 100644 --- a/drivers/net/dsa/sja1105/sja1105_mdio.c +++ b/drivers/net/dsa/sja1105/sja1105_mdio.c @@ -468,13 +468,10 @@ int sja1105_mdiobus_register(struct dsa_switch *ds) if (rc) return rc; - mdio_node = of_get_child_by_name(switch_node, "mdios"); + mdio_node = of_get_available_child_by_name(switch_node, "mdios"); if (!mdio_node) return 0; - if (!of_device_is_available(mdio_node)) - goto out_put_mdio_node; - if (regs->mdio_100base_tx != SJA1105_RSV_ADDR) { rc = sja1105_mdiobus_base_tx_register(priv, mdio_node); if (rc) @@ -487,7 +484,6 @@ int sja1105_mdiobus_register(struct dsa_switch *ds) goto err_free_base_tx_mdiobus; } -out_put_mdio_node: of_node_put(mdio_node); return 0; diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index a1f4ca6ad888..fefe46e2a5e6 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -58,56 +58,60 @@ enum sja1105_ptp_clk_mode { #define ptp_data_to_sja1105(d) \ container_of((d), struct sja1105_private, ptp_data) -int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr) +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct sja1105_private *priv = ds->priv; - struct hwtstamp_config config; + unsigned long hwts_tx_en, hwts_rx_en; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; + hwts_tx_en = priv->hwts_tx_en; + hwts_rx_en = priv->hwts_rx_en; - switch (config.tx_type) { + switch (config->tx_type) { case HWTSTAMP_TX_OFF: - priv->hwts_tx_en &= ~BIT(port); + hwts_tx_en &= ~BIT(port); break; case HWTSTAMP_TX_ON: - priv->hwts_tx_en |= BIT(port); + hwts_tx_en |= BIT(port); break; default: return -ERANGE; } - switch (config.rx_filter) { + switch (config->rx_filter) { case HWTSTAMP_FILTER_NONE: - priv->hwts_rx_en &= ~BIT(port); + hwts_rx_en &= ~BIT(port); break; - default: - priv->hwts_rx_en |= BIT(port); + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + hwts_rx_en |= BIT(port); break; + default: + return -ERANGE; } - if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) - return -EFAULT; + priv->hwts_tx_en = hwts_tx_en; + priv->hwts_rx_en = hwts_rx_en; + return 0; } -int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr) +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config) { struct sja1105_private *priv = ds->priv; - struct hwtstamp_config config; - config.flags = 0; + config->flags = 0; if (priv->hwts_tx_en & BIT(port)) - config.tx_type = HWTSTAMP_TX_ON; + config->tx_type = HWTSTAMP_TX_ON; else - config.tx_type = HWTSTAMP_TX_OFF; + config->tx_type = HWTSTAMP_TX_OFF; if (priv->hwts_rx_en & BIT(port)) - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else - config.rx_filter = HWTSTAMP_FILTER_NONE; + config->rx_filter = HWTSTAMP_FILTER_NONE; - return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? - -EFAULT : 0; + return 0; } int sja1105_get_ts_info(struct dsa_switch *ds, int port, @@ -727,10 +731,6 @@ static int sja1105_per_out_enable(struct sja1105_private *priv, if (perout->index != 0) return -EOPNOTSUPP; - /* Reject requests with unsupported flags */ - if (perout->flags) - return -EOPNOTSUPP; - mutex_lock(&ptp_data->lock); rc = sja1105_change_ptp_clk_pin_func(priv, PTP_PF_PEROUT); @@ -810,13 +810,6 @@ static int sja1105_extts_enable(struct sja1105_private *priv, if (extts->index != 0) return -EOPNOTSUPP; - /* Reject requests with unsupported flags */ - if (extts->flags & ~(PTP_ENABLE_FEATURE | - PTP_RISING_EDGE | - PTP_FALLING_EDGE | - PTP_STRICT_FLAGS)) - return -EOPNOTSUPP; - /* We can only enable time stamping on both edges, sadly. */ if ((extts->flags & PTP_STRICT_FLAGS) && (extts->flags & PTP_ENABLE_FEATURE) && @@ -832,7 +825,7 @@ static int sja1105_extts_enable(struct sja1105_private *priv, if (on) sja1105_ptp_extts_setup_timer(&priv->ptp_data); else - del_timer_sync(&priv->ptp_data.extts_timer); + timer_delete_sync(&priv->ptp_data.extts_timer); return 0; } @@ -902,6 +895,9 @@ int sja1105_ptp_clock_register(struct dsa_switch *ds) .n_pins = 1, .n_ext_ts = 1, .n_per_out = 1, + .supported_extts_flags = PTP_RISING_EDGE | + PTP_FALLING_EDGE | + PTP_STRICT_FLAGS, }; /* Only used on SJA1105 */ @@ -929,7 +925,7 @@ void sja1105_ptp_clock_unregister(struct dsa_switch *ds) if (IS_ERR_OR_NULL(ptp_data->clock)) return; - del_timer_sync(&ptp_data->extts_timer); + timer_delete_sync(&ptp_data->extts_timer); ptp_cancel_worker_sync(ptp_data->clock); skb_queue_purge(&ptp_data->skb_txtstamp_queue); skb_queue_purge(&ptp_data->skb_rxtstamp_queue); diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index 8add2bd5f728..325e3777ea07 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -112,9 +112,12 @@ bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, void sja1105_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb); -int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr); +int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config); -int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr); +int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack); int __sja1105_ptp_gettimex(struct dsa_switch *ds, u64 *ns, struct ptp_system_timestamp *sts); diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index baba204ad62f..ffece8a400a6 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -26,12 +26,8 @@ void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) pr_err("Start bit (%d) expected to be larger than end (%d)\n", start, end); } else if (rc == -ERANGE) { - if ((start - end + 1) > 64) - pr_err("Field %d-%d too large for 64 bits!\n", - start, end); - else - pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", - *val, start, end); + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); } dump_stack(); } @@ -1921,8 +1917,10 @@ int sja1105_table_delete_entry(struct sja1105_table *table, int i) if (i > table->entry_count) return -ERANGE; - memmove(entries + i * entry_size, entries + (i + 1) * entry_size, - (table->entry_count - i) * entry_size); + if (i + 1 < table->entry_count) { + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i - 1) * entry_size); + } table->entry_count--; diff --git a/drivers/net/dsa/sja1105/sja1105_tas.c b/drivers/net/dsa/sja1105/sja1105_tas.c index d7818710bc02..d5949d2c3e71 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.c +++ b/drivers/net/dsa/sja1105/sja1105_tas.c @@ -775,9 +775,8 @@ static void sja1105_tas_state_machine(struct work_struct *work) base_time_ts = ns_to_timespec64(base_time); now_ts = ns_to_timespec64(now); - dev_dbg(ds->dev, "OPER base time %lld.%09ld (now %lld.%09ld)\n", - base_time_ts.tv_sec, base_time_ts.tv_nsec, - now_ts.tv_sec, now_ts.tv_nsec); + dev_dbg(ds->dev, "OPER base time %ptSp (now %ptSp)\n", + &base_time_ts, &now_ts); break; @@ -798,8 +797,7 @@ static void sja1105_tas_state_machine(struct work_struct *work) if (now < tas_data->oper_base_time) { /* TAS has not started yet */ diff = ns_to_timespec64(tas_data->oper_base_time - now); - dev_dbg(ds->dev, "time to start: [%lld.%09ld]", - diff.tv_sec, diff.tv_nsec); + dev_dbg(ds->dev, "time to start: [%ptSp]", &diff); break; } diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index f18aa321053d..9d31b8258268 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -2258,14 +2258,14 @@ static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset) return !!(val & BIT(offset)); } -static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, - int val) +static int vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) { struct vsc73xx *vsc = gpiochip_get_data(chip); u32 tmp = val ? BIT(offset) : 0; - vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_GPIO, BIT(offset), tmp); + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset), tmp); } static int vsc73xx_gpio_direction_output(struct gpio_chip *chip, diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c index 4dbcc49a9e52..0a05f4156ef4 100644 --- a/drivers/net/dsa/xrs700x/xrs700x.c +++ b/drivers/net/dsa/xrs700x/xrs700x.c @@ -566,6 +566,7 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port, struct xrs700x *priv = ds->priv; struct net_device *user; int ret, i, hsr_pair[2]; + enum hsr_port_type type; enum hsr_version ver; bool fwd = false; @@ -589,6 +590,16 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port, return -EOPNOTSUPP; } + ret = hsr_get_port_type(hsr, dsa_to_port(ds, port)->user, &type); + if (ret) + return ret; + + if (type != HSR_PT_SLAVE_A && type != HSR_PT_SLAVE_B) { + NL_SET_ERR_MSG_MOD(extack, + "Only HSR slave ports can be offloaded"); + return -EOPNOTSUPP; + } + dsa_hsr_foreach_port(dp, ds, hsr) { if (dp->index != port) { partner = dp; diff --git a/drivers/net/dsa/yt921x.c b/drivers/net/dsa/yt921x.c new file mode 100644 index 000000000000..1c511f5dc6ab --- /dev/null +++ b/drivers/net/dsa/yt921x.c @@ -0,0 +1,3006 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Motorcomm YT921x Switch + * + * Should work on YT9213/YT9214/YT9215/YT9218, but only tested on YT9215+SGMII, + * be sure to do your own checks before porting to another chip. + * + * Copyright (c) 2025 David Yang + */ + +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_hsr.h> +#include <linux/if_vlan.h> +#include <linux/iopoll.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/of_net.h> + +#include <net/dsa.h> + +#include "yt921x.h" + +struct yt921x_mib_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +#define MIB_DESC(_size, _offset, _name) \ + {_size, _offset, _name} + +/* Must agree with yt921x_mib + * + * Unstructured fields (name != NULL) will appear in get_ethtool_stats(), + * structured go to their *_stats() methods, but we need their sizes and offsets + * to perform 32bit MIB overflow wraparound. + */ +static const struct yt921x_mib_desc yt921x_mib_descs[] = { + MIB_DESC(1, YT921X_MIB_DATA_RX_BROADCAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PAUSE, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_MULTICAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_CRC_ERR, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_ALIGN_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_UNDERSIZE_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_FRAG_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_64, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_65_TO_127, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_128_TO_255, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_256_TO_511, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_512_TO_1023, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_1024_TO_1518, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_PKT_SZ_1519_TO_MAX, NULL), + MIB_DESC(2, YT921X_MIB_DATA_RX_GOOD_BYTES, NULL), + + MIB_DESC(2, YT921X_MIB_DATA_RX_BAD_BYTES, "RxBadBytes"), + MIB_DESC(1, YT921X_MIB_DATA_RX_OVERSIZE_ERR, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_RX_DROPPED, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_BROADCAST, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PAUSE, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_MULTICAST, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_UNDERSIZE_ERR, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_64, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_65_TO_127, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_128_TO_255, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_256_TO_511, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_512_TO_1023, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_1024_TO_1518, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT_SZ_1519_TO_MAX, NULL), + + MIB_DESC(2, YT921X_MIB_DATA_TX_GOOD_BYTES, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_COLLISION, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_EXCESSIVE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_MULTIPLE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_SINGLE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_PKT, NULL), + + MIB_DESC(1, YT921X_MIB_DATA_TX_DEFERRED, NULL), + MIB_DESC(1, YT921X_MIB_DATA_TX_LATE_COLLISION, NULL), + MIB_DESC(1, YT921X_MIB_DATA_RX_OAM, "RxOAM"), + MIB_DESC(1, YT921X_MIB_DATA_TX_OAM, "TxOAM"), +}; + +struct yt921x_info { + const char *name; + u16 major; + /* Unknown, seems to be plain enumeration */ + u8 mode; + u8 extmode; + /* Ports with integral GbE PHYs, not including MCU Port 10 */ + u16 internal_mask; + /* TODO: see comments in yt921x_dsa_phylink_get_caps() */ + u16 external_mask; +}; + +#define YT921X_PORT_MASK_INTn(port) BIT(port) +#define YT921X_PORT_MASK_INT0_n(n) GENMASK((n) - 1, 0) +#define YT921X_PORT_MASK_EXT0 BIT(8) +#define YT921X_PORT_MASK_EXT1 BIT(9) + +static const struct yt921x_info yt921x_infos[] = { + { + "YT9215SC", YT9215_MAJOR, 1, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9215S", YT9215_MAJOR, 2, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9215RB", YT9215_MAJOR, 3, 0, + YT921X_PORT_MASK_INT0_n(5), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9214NB", YT9215_MAJOR, 3, 2, + YT921X_PORT_MASK_INTn(1) | YT921X_PORT_MASK_INTn(3), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + { + "YT9213NB", YT9215_MAJOR, 3, 3, + YT921X_PORT_MASK_INTn(1) | YT921X_PORT_MASK_INTn(3), + YT921X_PORT_MASK_EXT1, + }, + { + "YT9218N", YT9218_MAJOR, 0, 0, + YT921X_PORT_MASK_INT0_n(8), + 0, + }, + { + "YT9218MB", YT9218_MAJOR, 1, 0, + YT921X_PORT_MASK_INT0_n(8), + YT921X_PORT_MASK_EXT0 | YT921X_PORT_MASK_EXT1, + }, + {} +}; + +#define YT921X_NAME "yt921x" + +#define YT921X_VID_UNWARE 4095 + +#define YT921X_POLL_SLEEP_US 10000 +#define YT921X_POLL_TIMEOUT_US 100000 + +/* The interval should be small enough to avoid overflow of 32bit MIBs. + * + * Until we can read MIBs from stats64 call directly (i.e. sleep + * there), we have to poll stats more frequently then it is actually needed. + * For overflow protection, normally, 100 sec interval should have been OK. + */ +#define YT921X_STATS_INTERVAL_JIFFIES (3 * HZ) + +struct yt921x_reg_mdio { + struct mii_bus *bus; + int addr; + /* SWITCH_ID_1 / SWITCH_ID_0 of the device + * + * This is a way to multiplex multiple devices on the same MII phyaddr + * and should be configurable in DT. However, MDIO core simply doesn't + * allow multiple devices over one reg addr, so this is a fixed value + * for now until a solution is found. + * + * Keep this because we need switchid to form MII regaddrs anyway. + */ + unsigned char switchid; +}; + +/* TODO: SPI/I2C */ + +#define to_yt921x_priv(_ds) container_of_const(_ds, struct yt921x_priv, ds) +#define to_device(priv) ((priv)->ds.dev) + +static int yt921x_reg_read(struct yt921x_priv *priv, u32 reg, u32 *valp) +{ + WARN_ON(!mutex_is_locked(&priv->reg_lock)); + + return priv->reg_ops->read(priv->reg_ctx, reg, valp); +} + +static int yt921x_reg_write(struct yt921x_priv *priv, u32 reg, u32 val) +{ + WARN_ON(!mutex_is_locked(&priv->reg_lock)); + + return priv->reg_ops->write(priv->reg_ctx, reg, val); +} + +static int +yt921x_reg_wait(struct yt921x_priv *priv, u32 reg, u32 mask, u32 *valp) +{ + u32 val; + int res; + int ret; + + ret = read_poll_timeout(yt921x_reg_read, res, + res || (val & mask) == *valp, + YT921X_POLL_SLEEP_US, YT921X_POLL_TIMEOUT_US, + false, priv, reg, &val); + if (ret) + return ret; + if (res) + return res; + + *valp = val; + return 0; +} + +static int +yt921x_reg_update_bits(struct yt921x_priv *priv, u32 reg, u32 mask, u32 val) +{ + int res; + u32 v; + u32 u; + + res = yt921x_reg_read(priv, reg, &v); + if (res) + return res; + + u = v; + u &= ~mask; + u |= val; + if (u == v) + return 0; + + return yt921x_reg_write(priv, reg, u); +} + +static int yt921x_reg_set_bits(struct yt921x_priv *priv, u32 reg, u32 mask) +{ + return yt921x_reg_update_bits(priv, reg, 0, mask); +} + +static int yt921x_reg_clear_bits(struct yt921x_priv *priv, u32 reg, u32 mask) +{ + return yt921x_reg_update_bits(priv, reg, mask, 0); +} + +static int +yt921x_reg_toggle_bits(struct yt921x_priv *priv, u32 reg, u32 mask, bool set) +{ + return yt921x_reg_update_bits(priv, reg, mask, !set ? 0 : mask); +} + +/* Some registers, like VLANn_CTRL, should always be written in 64-bit, even if + * you are to write only the lower / upper 32 bits. + * + * There is no such restriction for reading, but we still provide 64-bit read + * wrappers so that we always handle u64 values. + */ + +static int yt921x_reg64_read(struct yt921x_priv *priv, u32 reg, u64 *valp) +{ + u32 lo; + u32 hi; + int res; + + res = yt921x_reg_read(priv, reg, &lo); + if (res) + return res; + res = yt921x_reg_read(priv, reg + 4, &hi); + if (res) + return res; + + *valp = ((u64)hi << 32) | lo; + return 0; +} + +static int yt921x_reg64_write(struct yt921x_priv *priv, u32 reg, u64 val) +{ + int res; + + res = yt921x_reg_write(priv, reg, (u32)val); + if (res) + return res; + return yt921x_reg_write(priv, reg + 4, (u32)(val >> 32)); +} + +static int +yt921x_reg64_update_bits(struct yt921x_priv *priv, u32 reg, u64 mask, u64 val) +{ + int res; + u64 v; + u64 u; + + res = yt921x_reg64_read(priv, reg, &v); + if (res) + return res; + + u = v; + u &= ~mask; + u |= val; + if (u == v) + return 0; + + return yt921x_reg64_write(priv, reg, u); +} + +static int yt921x_reg64_clear_bits(struct yt921x_priv *priv, u32 reg, u64 mask) +{ + return yt921x_reg64_update_bits(priv, reg, mask, 0); +} + +static int yt921x_reg_mdio_read(void *context, u32 reg, u32 *valp) +{ + struct yt921x_reg_mdio *mdio = context; + struct mii_bus *bus = mdio->bus; + int addr = mdio->addr; + u32 reg_addr; + u32 reg_data; + u32 val; + int res; + + /* Hold the mdio bus lock to avoid (un)locking for 4 times */ + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + reg_addr = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_ADDR | + YT921X_SMI_READ; + res = __mdiobus_write(bus, addr, reg_addr, (u16)(reg >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_addr, (u16)reg); + if (res) + goto end; + + reg_data = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_DATA | + YT921X_SMI_READ; + res = __mdiobus_read(bus, addr, reg_data); + if (res < 0) + goto end; + val = (u16)res; + res = __mdiobus_read(bus, addr, reg_data); + if (res < 0) + goto end; + val = (val << 16) | (u16)res; + + *valp = val; + res = 0; + +end: + mutex_unlock(&bus->mdio_lock); + return res; +} + +static int yt921x_reg_mdio_write(void *context, u32 reg, u32 val) +{ + struct yt921x_reg_mdio *mdio = context; + struct mii_bus *bus = mdio->bus; + int addr = mdio->addr; + u32 reg_addr; + u32 reg_data; + int res; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + reg_addr = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_ADDR | + YT921X_SMI_WRITE; + res = __mdiobus_write(bus, addr, reg_addr, (u16)(reg >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_addr, (u16)reg); + if (res) + goto end; + + reg_data = YT921X_SMI_SWITCHID(mdio->switchid) | YT921X_SMI_DATA | + YT921X_SMI_WRITE; + res = __mdiobus_write(bus, addr, reg_data, (u16)(val >> 16)); + if (res) + goto end; + res = __mdiobus_write(bus, addr, reg_data, (u16)val); + if (res) + goto end; + + res = 0; + +end: + mutex_unlock(&bus->mdio_lock); + return res; +} + +static const struct yt921x_reg_ops yt921x_reg_ops_mdio = { + .read = yt921x_reg_mdio_read, + .write = yt921x_reg_mdio_write, +}; + +/* TODO: SPI/I2C */ + +static int yt921x_intif_wait(struct yt921x_priv *priv) +{ + u32 val = 0; + + return yt921x_reg_wait(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START, + &val); +} + +static int +yt921x_intif_read(struct yt921x_priv *priv, int port, int reg, u16 *valp) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + u32 val; + int res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_READ; + res = yt921x_reg_update_bits(priv, YT921X_INT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_INT_MBUS_DIN, &val); + if (res) + return res; + + if ((u16)val != val) + dev_info(dev, + "%s: port %d, reg 0x%x: Expected u16, got 0x%08x\n", + __func__, port, reg, val); + *valp = (u16)val; + return 0; +} + +static int +yt921x_intif_write(struct yt921x_priv *priv, int port, int reg, u16 val) +{ + u32 mask; + u32 ctrl; + int res; + + res = yt921x_intif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_WRITE; + res = yt921x_reg_update_bits(priv, YT921X_INT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_DOUT, val); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_INT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + return yt921x_intif_wait(priv); +} + +static int yt921x_mbus_int_read(struct mii_bus *mbus, int port, int reg) +{ + struct yt921x_priv *priv = mbus->priv; + u16 val; + int res; + + if (port >= YT921X_PORT_NUM) + return U16_MAX; + + mutex_lock(&priv->reg_lock); + res = yt921x_intif_read(priv, port, reg, &val); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + return val; +} + +static int +yt921x_mbus_int_write(struct mii_bus *mbus, int port, int reg, u16 data) +{ + struct yt921x_priv *priv = mbus->priv; + int res; + + if (port >= YT921X_PORT_NUM) + return -ENODEV; + + mutex_lock(&priv->reg_lock); + res = yt921x_intif_write(priv, port, reg, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_mbus_int_init(struct yt921x_priv *priv, struct device_node *mnp) +{ + struct device *dev = to_device(priv); + struct mii_bus *mbus; + int res; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = "YT921x internal MDIO bus"; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); + mbus->priv = priv; + mbus->read = yt921x_mbus_int_read; + mbus->write = yt921x_mbus_int_write; + mbus->parent = dev; + mbus->phy_mask = (u32)~GENMASK(YT921X_PORT_NUM - 1, 0); + + res = devm_of_mdiobus_register(dev, mbus, mnp); + if (res) + return res; + + priv->mbus_int = mbus; + + return 0; +} + +static int yt921x_extif_wait(struct yt921x_priv *priv) +{ + u32 val = 0; + + return yt921x_reg_wait(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START, + &val); +} + +static int +yt921x_extif_read(struct yt921x_priv *priv, int port, int reg, u16 *valp) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + u32 val; + int res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_TYPE_M | YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_TYPE_C22 | YT921X_MBUS_CTRL_READ; + res = yt921x_reg_update_bits(priv, YT921X_EXT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_EXT_MBUS_DIN, &val); + if (res) + return res; + + if ((u16)val != val) + dev_info(dev, + "%s: port %d, reg 0x%x: Expected u16, got 0x%08x\n", + __func__, port, reg, val); + *valp = (u16)val; + return 0; +} + +static int +yt921x_extif_write(struct yt921x_priv *priv, int port, int reg, u16 val) +{ + u32 mask; + u32 ctrl; + int res; + + res = yt921x_extif_wait(priv); + if (res) + return res; + + mask = YT921X_MBUS_CTRL_PORT_M | YT921X_MBUS_CTRL_REG_M | + YT921X_MBUS_CTRL_TYPE_M | YT921X_MBUS_CTRL_OP_M; + ctrl = YT921X_MBUS_CTRL_PORT(port) | YT921X_MBUS_CTRL_REG(reg) | + YT921X_MBUS_CTRL_TYPE_C22 | YT921X_MBUS_CTRL_WRITE; + res = yt921x_reg_update_bits(priv, YT921X_EXT_MBUS_CTRL, mask, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_DOUT, val); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_EXT_MBUS_OP, YT921X_MBUS_OP_START); + if (res) + return res; + + return yt921x_extif_wait(priv); +} + +static int yt921x_mbus_ext_read(struct mii_bus *mbus, int port, int reg) +{ + struct yt921x_priv *priv = mbus->priv; + u16 val; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_extif_read(priv, port, reg, &val); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + return val; +} + +static int +yt921x_mbus_ext_write(struct mii_bus *mbus, int port, int reg, u16 data) +{ + struct yt921x_priv *priv = mbus->priv; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_extif_write(priv, port, reg, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_mbus_ext_init(struct yt921x_priv *priv, struct device_node *mnp) +{ + struct device *dev = to_device(priv); + struct mii_bus *mbus; + int res; + + mbus = devm_mdiobus_alloc(dev); + if (!mbus) + return -ENOMEM; + + mbus->name = "YT921x external MDIO bus"; + snprintf(mbus->id, MII_BUS_ID_SIZE, "%s@ext", dev_name(dev)); + mbus->priv = priv; + /* TODO: c45? */ + mbus->read = yt921x_mbus_ext_read; + mbus->write = yt921x_mbus_ext_write; + mbus->parent = dev; + + res = devm_of_mdiobus_register(dev, mbus, mnp); + if (res) + return res; + + priv->mbus_ext = mbus; + + return 0; +} + +/* Read and handle overflow of 32bit MIBs. MIB buffer must be zeroed before. */ +static int yt921x_read_mib(struct yt921x_priv *priv, int port) +{ + struct yt921x_port *pp = &priv->ports[port]; + struct device *dev = to_device(priv); + struct yt921x_mib *mib = &pp->mib; + int res = 0; + + /* Reading of yt921x_port::mib is not protected by a lock and it's vain + * to keep its consistency, since we have to read registers one by one + * and there is no way to make a snapshot of MIB stats. + * + * Writing (by this function only) is and should be protected by + * reg_lock. + */ + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + u32 reg = YT921X_MIBn_DATA0(port) + desc->offset; + u64 *valp = &((u64 *)mib)[i]; + u64 val = *valp; + u32 val0; + u32 val1; + + res = yt921x_reg_read(priv, reg, &val0); + if (res) + break; + + if (desc->size <= 1) { + if (val < (u32)val) + /* overflow */ + val += (u64)U32_MAX + 1; + val &= ~U32_MAX; + val |= val0; + } else { + res = yt921x_reg_read(priv, reg + 4, &val1); + if (res) + break; + val = ((u64)val1 << 32) | val0; + } + + WRITE_ONCE(*valp, val); + } + + pp->rx_frames = mib->rx_64byte + mib->rx_65_127byte + + mib->rx_128_255byte + mib->rx_256_511byte + + mib->rx_512_1023byte + mib->rx_1024_1518byte + + mib->rx_jumbo; + pp->tx_frames = mib->tx_64byte + mib->tx_65_127byte + + mib->tx_128_255byte + mib->tx_256_511byte + + mib->tx_512_1023byte + mib->tx_1024_1518byte + + mib->tx_jumbo; + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "read stats for", + port, res); + return res; +} + +static void yt921x_poll_mib(struct work_struct *work) +{ + struct yt921x_port *pp = container_of_const(work, struct yt921x_port, + mib_read.work); + struct yt921x_priv *priv = (void *)(pp - pp->index) - + offsetof(struct yt921x_priv, ports); + unsigned long delay = YT921X_STATS_INTERVAL_JIFFIES; + int port = pp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + if (res) + delay *= 4; + + schedule_delayed_work(&pp->mib_read, delay); +} + +static void +yt921x_dsa_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + if (stringset != ETH_SS_STATS) + return; + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (desc->name) + ethtool_puts(&data, desc->name); + } +} + +static void +yt921x_dsa_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + size_t j; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + j = 0; + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (!desc->name) + continue; + + data[j] = ((u64 *)mib)[i]; + j++; + } +} + +static int yt921x_dsa_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + int cnt = 0; + + if (sset != ETH_SS_STATS) + return 0; + + for (size_t i = 0; i < ARRAY_SIZE(yt921x_mib_descs); i++) { + const struct yt921x_mib_desc *desc = &yt921x_mib_descs[i]; + + if (desc->name) + cnt++; + } + + return cnt; +} + +static void +yt921x_dsa_get_eth_mac_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_mac_stats *mac_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + mac_stats->FramesTransmittedOK = pp->tx_frames; + mac_stats->SingleCollisionFrames = mib->tx_single_collisions; + mac_stats->MultipleCollisionFrames = mib->tx_multiple_collisions; + mac_stats->FramesReceivedOK = pp->rx_frames; + mac_stats->FrameCheckSequenceErrors = mib->rx_crc_errors; + mac_stats->AlignmentErrors = mib->rx_alignment_errors; + mac_stats->OctetsTransmittedOK = mib->tx_good_bytes; + mac_stats->FramesWithDeferredXmissions = mib->tx_deferred; + mac_stats->LateCollisions = mib->tx_late_collisions; + mac_stats->FramesAbortedDueToXSColls = mib->tx_aborted_errors; + /* mac_stats->FramesLostDueToIntMACXmitError */ + /* mac_stats->CarrierSenseErrors */ + mac_stats->OctetsReceivedOK = mib->rx_good_bytes; + /* mac_stats->FramesLostDueToIntMACRcvError */ + mac_stats->MulticastFramesXmittedOK = mib->tx_multicast; + mac_stats->BroadcastFramesXmittedOK = mib->tx_broadcast; + /* mac_stats->FramesWithExcessiveDeferral */ + mac_stats->MulticastFramesReceivedOK = mib->rx_multicast; + mac_stats->BroadcastFramesReceivedOK = mib->rx_broadcast; + /* mac_stats->InRangeLengthErrors */ + /* mac_stats->OutOfRangeLengthField */ + mac_stats->FrameTooLongErrors = mib->rx_oversize_errors; +} + +static void +yt921x_dsa_get_eth_ctrl_stats(struct dsa_switch *ds, int port, + struct ethtool_eth_ctrl_stats *ctrl_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + ctrl_stats->MACControlFramesTransmitted = mib->tx_pause; + ctrl_stats->MACControlFramesReceived = mib->rx_pause; + /* ctrl_stats->UnsupportedOpcodesReceived */ +} + +static const struct ethtool_rmon_hist_range yt921x_rmon_ranges[] = { + { 0, 64 }, + { 65, 127 }, + { 128, 255 }, + { 256, 511 }, + { 512, 1023 }, + { 1024, 1518 }, + { 1519, YT921X_FRAME_SIZE_MAX }, + {} +}; + +static void +yt921x_dsa_get_rmon_stats(struct dsa_switch *ds, int port, + struct ethtool_rmon_stats *rmon_stats, + const struct ethtool_rmon_hist_range **ranges) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + *ranges = yt921x_rmon_ranges; + + rmon_stats->undersize_pkts = mib->rx_undersize_errors; + rmon_stats->oversize_pkts = mib->rx_oversize_errors; + rmon_stats->fragments = mib->rx_alignment_errors; + /* rmon_stats->jabbers */ + + rmon_stats->hist[0] = mib->rx_64byte; + rmon_stats->hist[1] = mib->rx_65_127byte; + rmon_stats->hist[2] = mib->rx_128_255byte; + rmon_stats->hist[3] = mib->rx_256_511byte; + rmon_stats->hist[4] = mib->rx_512_1023byte; + rmon_stats->hist[5] = mib->rx_1024_1518byte; + rmon_stats->hist[6] = mib->rx_jumbo; + + rmon_stats->hist_tx[0] = mib->tx_64byte; + rmon_stats->hist_tx[1] = mib->tx_65_127byte; + rmon_stats->hist_tx[2] = mib->tx_128_255byte; + rmon_stats->hist_tx[3] = mib->tx_256_511byte; + rmon_stats->hist_tx[4] = mib->tx_512_1023byte; + rmon_stats->hist_tx[5] = mib->tx_1024_1518byte; + rmon_stats->hist_tx[6] = mib->tx_jumbo; +} + +static void +yt921x_dsa_get_stats64(struct dsa_switch *ds, int port, + struct rtnl_link_stats64 *stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + stats->rx_length_errors = mib->rx_undersize_errors + + mib->rx_fragment_errors; + stats->rx_over_errors = mib->rx_oversize_errors; + stats->rx_crc_errors = mib->rx_crc_errors; + stats->rx_frame_errors = mib->rx_alignment_errors; + /* stats->rx_fifo_errors */ + /* stats->rx_missed_errors */ + + stats->tx_aborted_errors = mib->tx_aborted_errors; + /* stats->tx_carrier_errors */ + stats->tx_fifo_errors = mib->tx_undersize_errors; + /* stats->tx_heartbeat_errors */ + stats->tx_window_errors = mib->tx_late_collisions; + + stats->rx_packets = pp->rx_frames; + stats->tx_packets = pp->tx_frames; + stats->rx_bytes = mib->rx_good_bytes - ETH_FCS_LEN * stats->rx_packets; + stats->tx_bytes = mib->tx_good_bytes - ETH_FCS_LEN * stats->tx_packets; + stats->rx_errors = stats->rx_length_errors + stats->rx_over_errors + + stats->rx_crc_errors + stats->rx_frame_errors; + stats->tx_errors = stats->tx_aborted_errors + stats->tx_fifo_errors + + stats->tx_window_errors; + stats->rx_dropped = mib->rx_dropped; + /* stats->tx_dropped */ + stats->multicast = mib->rx_multicast; + stats->collisions = mib->tx_collisions; +} + +static void +yt921x_dsa_get_pause_stats(struct dsa_switch *ds, int port, + struct ethtool_pause_stats *pause_stats) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct yt921x_port *pp = &priv->ports[port]; + struct yt921x_mib *mib = &pp->mib; + + mutex_lock(&priv->reg_lock); + yt921x_read_mib(priv, port); + mutex_unlock(&priv->reg_lock); + + pause_stats->tx_pause_frames = mib->tx_pause; + pause_stats->rx_pause_frames = mib->rx_pause; +} + +static int +yt921x_set_eee(struct yt921x_priv *priv, int port, struct ethtool_keee *e) +{ + /* Poor datasheet for EEE operations; don't ask if you are confused */ + + bool enable = e->eee_enabled; + u16 new_mask; + int res; + + /* Enable / disable global EEE */ + new_mask = priv->eee_ports_mask; + new_mask &= ~BIT(port); + new_mask |= !enable ? 0 : BIT(port); + + if (!!new_mask != !!priv->eee_ports_mask) { + res = yt921x_reg_toggle_bits(priv, YT921X_PON_STRAP_FUNC, + YT921X_PON_STRAP_EEE, !!new_mask); + if (res) + return res; + res = yt921x_reg_toggle_bits(priv, YT921X_PON_STRAP_VAL, + YT921X_PON_STRAP_EEE, !!new_mask); + if (res) + return res; + } + + priv->eee_ports_mask = new_mask; + + /* Enable / disable port EEE */ + res = yt921x_reg_toggle_bits(priv, YT921X_EEE_CTRL, + YT921X_EEE_CTRL_ENn(port), enable); + if (res) + return res; + res = yt921x_reg_toggle_bits(priv, YT921X_EEEn_VAL(port), + YT921X_EEE_VAL_DATA, enable); + if (res) + return res; + + return 0; +} + +static int +yt921x_dsa_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_keee *e) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_set_eee(priv, port, e); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + /* Only serves as packet filter, since the frame size is always set to + * maximum after reset + */ + + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct dsa_port *dp = dsa_to_port(ds, port); + int frame_size; + int res; + + frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN; + if (dsa_port_is_cpu(dp)) + frame_size += YT921X_TAG_LEN; + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_update_bits(priv, YT921X_MACn_FRAME(port), + YT921X_MAC_FRAME_SIZE_M, + YT921X_MAC_FRAME_SIZE(frame_size)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_dsa_port_max_mtu(struct dsa_switch *ds, int port) +{ + /* Only called for user ports, exclude tag len here */ + return YT921X_FRAME_SIZE_MAX - ETH_HLEN - ETH_FCS_LEN - YT921X_TAG_LEN; +} + +static int +yt921x_mirror_del(struct yt921x_priv *priv, int port, bool ingress) +{ + u32 mask; + + if (ingress) + mask = YT921X_MIRROR_IGR_PORTn(port); + else + mask = YT921X_MIRROR_EGR_PORTn(port); + return yt921x_reg_clear_bits(priv, YT921X_MIRROR, mask); +} + +static int +yt921x_mirror_add(struct yt921x_priv *priv, int port, bool ingress, + int to_local_port, struct netlink_ext_ack *extack) +{ + u32 srcs; + u32 ctrl; + u32 val; + u32 dst; + int res; + + if (ingress) + srcs = YT921X_MIRROR_IGR_PORTn(port); + else + srcs = YT921X_MIRROR_EGR_PORTn(port); + dst = YT921X_MIRROR_PORT(to_local_port); + + res = yt921x_reg_read(priv, YT921X_MIRROR, &val); + if (res) + return res; + + /* other mirror tasks & different dst port -> conflict */ + if ((val & ~srcs & (YT921X_MIRROR_EGR_PORTS_M | + YT921X_MIRROR_IGR_PORTS_M)) && + (val & YT921X_MIRROR_PORT_M) != dst) { + NL_SET_ERR_MSG_MOD(extack, + "Sniffer port is already configured, delete existing rules & retry"); + return -EBUSY; + } + + ctrl = val & ~YT921X_MIRROR_PORT_M; + ctrl |= srcs; + ctrl |= dst; + + if (ctrl == val) + return 0; + + return yt921x_reg_write(priv, YT921X_MIRROR, ctrl); +} + +static void +yt921x_dsa_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_mirror_del(priv, port, mirror->ingress); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "unmirror", + port, res); +} + +static int +yt921x_dsa_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_mirror_add(priv, port, ingress, + mirror->to_local_port, extack); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_fdb_wait(struct yt921x_priv *priv, u32 *valp) +{ + struct device *dev = to_device(priv); + u32 val = YT921X_FDB_RESULT_DONE; + int res; + + res = yt921x_reg_wait(priv, YT921X_FDB_RESULT, YT921X_FDB_RESULT_DONE, + &val); + if (res) { + dev_err(dev, "FDB probably stuck\n"); + return res; + } + + *valp = val; + return 0; +} + +static int +yt921x_fdb_in01(struct yt921x_priv *priv, const unsigned char *addr, + u16 vid, u32 ctrl1) +{ + u32 ctrl; + int res; + + ctrl = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; + res = yt921x_reg_write(priv, YT921X_FDB_IN0, ctrl); + if (res) + return res; + + ctrl = ctrl1 | YT921X_FDB_IO1_FID(vid) | (addr[4] << 8) | addr[5]; + return yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl); +} + +static int +yt921x_fdb_has(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 *indexp) +{ + u32 ctrl; + u32 val; + int res; + + res = yt921x_fdb_in01(priv, addr, vid, 0); + if (res) + return res; + + ctrl = 0; + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_GET_ONE | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + if (val & YT921X_FDB_RESULT_NOTFOUND) { + *indexp = YT921X_FDB_NUM; + return 0; + } + + *indexp = FIELD_GET(YT921X_FDB_RESULT_INDEX_M, val); + return 0; +} + +static int +yt921x_fdb_read(struct yt921x_priv *priv, unsigned char *addr, u16 *vidp, + u16 *ports_maskp, u16 *indexp, u8 *statusp) +{ + struct device *dev = to_device(priv); + u16 index; + u32 data0; + u32 data1; + u32 data2; + u32 val; + int res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + if (val & YT921X_FDB_RESULT_NOTFOUND) { + *ports_maskp = 0; + return 0; + } + index = FIELD_GET(YT921X_FDB_RESULT_INDEX_M, val); + + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &data1); + if (res) + return res; + if ((data1 & YT921X_FDB_IO1_STATUS_M) == + YT921X_FDB_IO1_STATUS_INVALID) { + *ports_maskp = 0; + return 0; + } + + res = yt921x_reg_read(priv, YT921X_FDB_OUT0, &data0); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &data2); + if (res) + return res; + + addr[0] = data0 >> 24; + addr[1] = data0 >> 16; + addr[2] = data0 >> 8; + addr[3] = data0; + addr[4] = data1 >> 8; + addr[5] = data1; + *vidp = FIELD_GET(YT921X_FDB_IO1_FID_M, data1); + *indexp = index; + *ports_maskp = FIELD_GET(YT921X_FDB_IO2_EGR_PORTS_M, data2); + *statusp = FIELD_GET(YT921X_FDB_IO1_STATUS_M, data1); + + dev_dbg(dev, + "%s: index 0x%x, mac %02x:%02x:%02x:%02x:%02x:%02x, vid %d, ports 0x%x, status %d\n", + __func__, *indexp, addr[0], addr[1], addr[2], addr[3], + addr[4], addr[5], *vidp, *ports_maskp, *statusp); + return 0; +} + +static int +yt921x_fdb_dump(struct yt921x_priv *priv, u16 ports_mask, + dsa_fdb_dump_cb_t *cb, void *data) +{ + unsigned char addr[ETH_ALEN]; + u8 status; + u16 pmask; + u16 index; + u32 ctrl; + u16 vid; + int res; + + ctrl = YT921X_FDB_OP_INDEX(0) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_OP_GET_ONE | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + res = yt921x_fdb_read(priv, addr, &vid, &pmask, &index, &status); + if (res) + return res; + if ((pmask & ports_mask) && !is_multicast_ether_addr(addr)) { + res = cb(addr, vid, + status == YT921X_FDB_ENTRY_STATUS_STATIC, data); + if (res) + return res; + } + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + index = 0; + do { + ctrl = YT921X_FDB_OP_INDEX(index) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_NEXT_TYPE_UCAST_PORT | + YT921X_FDB_OP_OP_GET_NEXT | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_read(priv, addr, &vid, &pmask, &index, + &status); + if (res) + return res; + if (!pmask) + break; + + if ((pmask & ports_mask) && !is_multicast_ether_addr(addr)) { + res = cb(addr, vid, + status == YT921X_FDB_ENTRY_STATUS_STATIC, + data); + if (res) + return res; + } + + /* Never call GET_NEXT with 4095, otherwise it will hang + * forever until a reset! + */ + } while (index < YT921X_FDB_NUM - 1); + + return 0; +} + +static int +yt921x_fdb_flush_raw(struct yt921x_priv *priv, u16 ports_mask, u16 vid, + bool flush_static) +{ + u32 ctrl; + u32 val; + int res; + + if (vid < 4096) { + ctrl = YT921X_FDB_IO1_FID(vid); + res = yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl); + if (res) + return res; + } + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_FLUSH | YT921X_FDB_OP_START; + if (vid >= 4096) + ctrl |= YT921X_FDB_OP_FLUSH_PORT; + else + ctrl |= YT921X_FDB_OP_FLUSH_PORT_VID; + if (flush_static) + ctrl |= YT921X_FDB_OP_FLUSH_STATIC; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + res = yt921x_fdb_wait(priv, &val); + if (res) + return res; + + return 0; +} + +static int +yt921x_fdb_flush_port(struct yt921x_priv *priv, int port, bool flush_static) +{ + return yt921x_fdb_flush_raw(priv, BIT(port), 4096, flush_static); +} + +static int +yt921x_fdb_add_index_in12(struct yt921x_priv *priv, u16 index, u16 ctrl1, + u16 ctrl2) +{ + u32 ctrl; + u32 val; + int res; + + res = yt921x_reg_write(priv, YT921X_FDB_IN1, ctrl1); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl2); + if (res) + return res; + + ctrl = YT921X_FDB_OP_INDEX(index) | YT921X_FDB_OP_MODE_INDEX | + YT921X_FDB_OP_OP_ADD | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); +} + +static int +yt921x_fdb_add(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 ports_mask) +{ + u32 ctrl; + u32 val; + int res; + + ctrl = YT921X_FDB_IO1_STATUS_STATIC; + res = yt921x_fdb_in01(priv, addr, vid, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_IO2_EGR_PORTS(ports_mask); + res = yt921x_reg_write(priv, YT921X_FDB_IN2, ctrl); + if (res) + return res; + + ctrl = YT921X_FDB_OP_OP_ADD | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); +} + +static int +yt921x_fdb_leave(struct yt921x_priv *priv, const unsigned char *addr, + u16 vid, u16 ports_mask) +{ + u16 index; + u32 ctrl1; + u32 ctrl2; + u32 ctrl; + u32 val2; + u32 val; + int res; + + /* Check for presence */ + res = yt921x_fdb_has(priv, addr, vid, &index); + if (res) + return res; + if (index >= YT921X_FDB_NUM) + return 0; + + /* Check if action required */ + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2); + if (res) + return res; + + ctrl2 = val2 & ~YT921X_FDB_IO2_EGR_PORTS(ports_mask); + if (ctrl2 == val2) + return 0; + if (!(ctrl2 & YT921X_FDB_IO2_EGR_PORTS_M)) { + ctrl = YT921X_FDB_OP_OP_DEL | YT921X_FDB_OP_START; + res = yt921x_reg_write(priv, YT921X_FDB_OP, ctrl); + if (res) + return res; + + return yt921x_fdb_wait(priv, &val); + } + + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &ctrl1); + if (res) + return res; + + return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2); +} + +static int +yt921x_fdb_join(struct yt921x_priv *priv, const unsigned char *addr, u16 vid, + u16 ports_mask) +{ + u16 index; + u32 ctrl1; + u32 ctrl2; + u32 val1; + u32 val2; + int res; + + /* Check for presence */ + res = yt921x_fdb_has(priv, addr, vid, &index); + if (res) + return res; + if (index >= YT921X_FDB_NUM) + return yt921x_fdb_add(priv, addr, vid, ports_mask); + + /* Check if action required */ + res = yt921x_reg_read(priv, YT921X_FDB_OUT1, &val1); + if (res) + return res; + res = yt921x_reg_read(priv, YT921X_FDB_OUT2, &val2); + if (res) + return res; + + ctrl1 = val1 & ~YT921X_FDB_IO1_STATUS_M; + ctrl1 |= YT921X_FDB_IO1_STATUS_STATIC; + ctrl2 = val2 | YT921X_FDB_IO2_EGR_PORTS(ports_mask); + if (ctrl1 == val1 && ctrl2 == val2) + return 0; + + return yt921x_fdb_add_index_in12(priv, index, ctrl1, ctrl2); +} + +static int +yt921x_dsa_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + /* Hardware FDB is shared for fdb and mdb, "bridge fdb show" + * only wants to see unicast + */ + res = yt921x_fdb_dump(priv, BIT(port), cb, data); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void yt921x_dsa_port_fast_age(struct dsa_switch *ds, int port) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_flush_port(priv, port, false); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "clear FDB for", + port, res); +} + +static int +yt921x_dsa_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u32 ctrl; + int res; + + /* AGEING reg is set in 5s step */ + ctrl = clamp(msecs / 5000, 1, U16_MAX); + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_write(priv, YT921X_AGEING, ctrl); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_leave(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_join(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const unsigned char *addr = mdb->addr; + u16 vid = mdb->vid; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_leave(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const unsigned char *addr = mdb->addr; + u16 vid = mdb->vid; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_fdb_join(priv, addr, vid, BIT(port)); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_port_set_pvid(struct yt921x_priv *priv, int port, u16 vid) +{ + u32 mask; + u32 ctrl; + + mask = YT921X_PORT_VLAN_CTRL_CVID_M; + ctrl = YT921X_PORT_VLAN_CTRL_CVID(vid); + return yt921x_reg_update_bits(priv, YT921X_PORTn_VLAN_CTRL(port), + mask, ctrl); +} + +static int +yt921x_vlan_filtering(struct yt921x_priv *priv, int port, bool vlan_filtering) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + struct net_device *bdev; + u16 pvid; + u32 mask; + u32 ctrl; + int res; + + bdev = dsa_port_bridge_dev_get(dp); + + if (!bdev || !vlan_filtering) + pvid = YT921X_VID_UNWARE; + else + br_vlan_get_pvid(bdev, &pvid); + res = yt921x_port_set_pvid(priv, port, pvid); + if (res) + return res; + + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_TAGGED | + YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + ctrl = 0; + /* Do not drop tagged frames here; let VLAN_IGR_FILTER do it */ + if (vlan_filtering && !pvid) + ctrl |= YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_update_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), + mask, ctrl); + if (res) + return res; + + res = yt921x_reg_toggle_bits(priv, YT921X_VLAN_IGR_FILTER, + YT921X_VLAN_IGR_FILTER_PORTn(port), + vlan_filtering); + if (res) + return res; + + /* Turn on / off VLAN awareness */ + mask = YT921X_PORT_IGR_TPIDn_CTAG_M; + if (!vlan_filtering) + ctrl = 0; + else + ctrl = YT921X_PORT_IGR_TPIDn_CTAG(0); + res = yt921x_reg_update_bits(priv, YT921X_PORTn_IGR_TPID(port), + mask, ctrl); + if (res) + return res; + + return 0; +} + +static int +yt921x_vlan_del(struct yt921x_priv *priv, int port, u16 vid) +{ + u64 mask64; + + mask64 = YT921X_VLAN_CTRL_PORTS(port) | + YT921X_VLAN_CTRL_UNTAG_PORTn(port); + + return yt921x_reg64_clear_bits(priv, YT921X_VLANn_CTRL(vid), mask64); +} + +static int +yt921x_vlan_add(struct yt921x_priv *priv, int port, u16 vid, bool untagged) +{ + u64 mask64; + u64 ctrl64; + + mask64 = YT921X_VLAN_CTRL_PORTn(port) | + YT921X_VLAN_CTRL_PORTS(priv->cpu_ports_mask); + ctrl64 = mask64; + + mask64 |= YT921X_VLAN_CTRL_UNTAG_PORTn(port); + if (untagged) + ctrl64 |= YT921X_VLAN_CTRL_UNTAG_PORTn(port); + + return yt921x_reg64_update_bits(priv, YT921X_VLANn_CTRL(vid), + mask64, ctrl64); +} + +static int +yt921x_pvid_clear(struct yt921x_priv *priv, int port) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + bool vlan_filtering; + u32 mask; + int res; + + vlan_filtering = dsa_port_is_vlan_filtering(dp); + + res = yt921x_port_set_pvid(priv, port, + vlan_filtering ? 0 : YT921X_VID_UNWARE); + if (res) + return res; + + if (vlan_filtering) { + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_set_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), + mask); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_pvid_set(struct yt921x_priv *priv, int port, u16 vid) +{ + struct dsa_port *dp = dsa_to_port(&priv->ds, port); + bool vlan_filtering; + u32 mask; + int res; + + vlan_filtering = dsa_port_is_vlan_filtering(dp); + + if (vlan_filtering) { + res = yt921x_port_set_pvid(priv, port, vid); + if (res) + return res; + } + + mask = YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_VLAN_CTRL1(port), mask); + if (res) + return res; + + return 0; +} + +static int +yt921x_dsa_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + res = yt921x_vlan_filtering(priv, port, vlan_filtering); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 vid = vlan->vid; + u16 pvid; + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + do { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + res = yt921x_vlan_del(priv, port, vid); + if (res) + break; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + br_vlan_get_pvid(bdev, &pvid); + if (pvid == vid) + res = yt921x_pvid_clear(priv, port); + } + } while (0); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 vid = vlan->vid; + u16 pvid; + int res; + + /* CPU port is supposed to be a member of every VLAN; see + * yt921x_vlan_add() and yt921x_port_setup() + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + do { + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + res = yt921x_vlan_add(priv, port, vid, + vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED); + if (res) + break; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + res = yt921x_pvid_set(priv, port, vid); + } else { + br_vlan_get_pvid(bdev, &pvid); + if (pvid == vid) + res = yt921x_pvid_clear(priv, port); + } + } + } while (0); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_userport_standalone(struct yt921x_priv *priv, int port) +{ + u32 mask; + u32 ctrl; + int res; + + ctrl = ~priv->cpu_ports_mask; + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), ctrl); + if (res) + return res; + + /* Turn off FDB learning to prevent FDB pollution */ + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_set_bits(priv, YT921X_PORTn_LEARN(port), mask); + if (res) + return res; + + /* Turn off VLAN awareness */ + mask = YT921X_PORT_IGR_TPIDn_CTAG_M; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_IGR_TPID(port), mask); + if (res) + return res; + + /* Unrelated since learning is off and all packets are trapped; + * set it anyway + */ + res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE); + if (res) + return res; + + return 0; +} + +static int yt921x_userport_bridge(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_LEARN(port), mask); + if (res) + return res; + + return 0; +} + +static int yt921x_isolate(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = BIT(port); + for (int i = 0; i < YT921X_PORT_NUM; i++) { + if ((BIT(i) & priv->cpu_ports_mask) || i == port) + continue; + + res = yt921x_reg_set_bits(priv, YT921X_PORTn_ISOLATION(i), + mask); + if (res) + return res; + } + + return 0; +} + +/* Make sure to include the CPU port in ports_mask, or your bridge will + * not have it. + */ +static int yt921x_bridge(struct yt921x_priv *priv, u16 ports_mask) +{ + unsigned long targets_mask = ports_mask & ~priv->cpu_ports_mask; + u32 isolated_mask; + u32 ctrl; + int port; + int res; + + isolated_mask = 0; + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + if (pp->isolated) + isolated_mask |= BIT(port); + } + + /* Block from non-cpu bridge ports ... */ + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + /* to non-bridge ports */ + ctrl = ~ports_mask; + /* to isolated ports when isolated */ + if (pp->isolated) + ctrl |= isolated_mask; + /* to itself when non-hairpin */ + if (!pp->hairpin) + ctrl |= BIT(port); + else + ctrl &= ~BIT(port); + + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), + ctrl); + if (res) + return res; + } + + return 0; +} + +static int yt921x_bridge_leave(struct yt921x_priv *priv, int port) +{ + int res; + + res = yt921x_userport_standalone(priv, port); + if (res) + return res; + + res = yt921x_isolate(priv, port); + if (res) + return res; + + return 0; +} + +static int +yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask) +{ + int res; + + res = yt921x_userport_bridge(priv, port); + if (res) + return res; + + res = yt921x_bridge(priv, ports_mask); + if (res) + return res; + + return 0; +} + +static u32 +dsa_bridge_ports(struct dsa_switch *ds, const struct net_device *bdev) +{ + struct dsa_port *dp; + u32 mask = 0; + + dsa_switch_for_each_user_port(dp, ds) + if (dsa_port_offloads_bridge_dev(dp, bdev)) + mask |= BIT(dp->index); + + return mask; +} + +static int +yt921x_bridge_flags(struct yt921x_priv *priv, int port, + struct switchdev_brport_flags flags) +{ + struct yt921x_port *pp = &priv->ports[port]; + bool do_flush; + u32 mask; + int res; + + if (flags.mask & BR_LEARNING) { + bool learning = flags.val & BR_LEARNING; + + mask = YT921X_PORT_LEARN_DIS; + res = yt921x_reg_toggle_bits(priv, YT921X_PORTn_LEARN(port), + mask, !learning); + if (res) + return res; + } + + /* BR_FLOOD, BR_MCAST_FLOOD: see the comment where ACT_UNK_ACTn_TRAP + * is set + */ + + /* BR_BCAST_FLOOD: we can filter bcast, but cannot trap them */ + + do_flush = false; + if (flags.mask & BR_HAIRPIN_MODE) { + pp->hairpin = flags.val & BR_HAIRPIN_MODE; + do_flush = true; + } + if (flags.mask & BR_ISOLATED) { + pp->isolated = flags.val & BR_ISOLATED; + do_flush = true; + } + if (do_flush) { + struct dsa_switch *ds = &priv->ds; + struct dsa_port *dp = dsa_to_port(ds, port); + struct net_device *bdev; + + bdev = dsa_port_bridge_dev_get(dp); + if (bdev) { + u32 ports_mask; + + ports_mask = dsa_bridge_ports(ds, bdev); + ports_mask |= priv->cpu_ports_mask; + res = yt921x_bridge(priv, ports_mask); + if (res) + return res; + } + } + + return 0; +} + +static int +yt921x_dsa_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~(BR_HAIRPIN_MODE | BR_LEARNING | BR_FLOOD | + BR_MCAST_FLOOD | BR_ISOLATED)) + return -EINVAL; + return 0; +} + +static int +yt921x_dsa_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_flags(priv, port, flags); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void +yt921x_dsa_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + int res; + + if (dsa_is_cpu_port(ds, port)) + return; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_leave(priv, port); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "unbridge", + port, res); +} + +static int +yt921x_dsa_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u16 ports_mask; + int res; + + if (dsa_is_cpu_port(ds, port)) + return 0; + + ports_mask = dsa_bridge_ports(ds, bridge.dev); + ports_mask |= priv->cpu_ports_mask; + + mutex_lock(&priv->reg_lock); + res = yt921x_bridge_join(priv, port, ports_mask); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_port_mst_state_set(struct dsa_switch *ds, int port, + const struct switchdev_mst_state *st) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u32 mask; + u32 ctrl; + int res; + + mask = YT921X_STP_PORTn_M(port); + switch (st->state) { + case BR_STATE_DISABLED: + ctrl = YT921X_STP_PORTn_DISABLED(port); + break; + case BR_STATE_LISTENING: + case BR_STATE_LEARNING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + break; + case BR_STATE_FORWARDING: + default: + ctrl = YT921X_STP_PORTn_FORWARD(port); + break; + case BR_STATE_BLOCKING: + ctrl = YT921X_STP_PORTn_BLOCKING(port); + break; + } + + mutex_lock(&priv->reg_lock); + res = yt921x_reg_update_bits(priv, YT921X_STPn(st->msti), mask, ctrl); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int +yt921x_dsa_vlan_msti_set(struct dsa_switch *ds, struct dsa_bridge bridge, + const struct switchdev_vlan_msti *msti) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + u64 mask64; + u64 ctrl64; + int res; + + if (!msti->vid) + return -EINVAL; + if (!msti->msti || msti->msti >= YT921X_MSTI_NUM) + return -EINVAL; + + mask64 = YT921X_VLAN_CTRL_STP_ID_M; + ctrl64 = YT921X_VLAN_CTRL_STP_ID(msti->msti); + + mutex_lock(&priv->reg_lock); + res = yt921x_reg64_update_bits(priv, YT921X_VLANn_CTRL(msti->vid), + mask64, ctrl64); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static void +yt921x_dsa_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct dsa_port *dp = dsa_to_port(ds, port); + struct device *dev = to_device(priv); + bool learning; + u32 mask; + u32 ctrl; + int res; + + mask = YT921X_STP_PORTn_M(port); + learning = false; + switch (state) { + case BR_STATE_DISABLED: + ctrl = YT921X_STP_PORTn_DISABLED(port); + break; + case BR_STATE_LISTENING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + break; + case BR_STATE_LEARNING: + ctrl = YT921X_STP_PORTn_LEARNING(port); + learning = dp->learning; + break; + case BR_STATE_FORWARDING: + default: + ctrl = YT921X_STP_PORTn_FORWARD(port); + learning = dp->learning; + break; + case BR_STATE_BLOCKING: + ctrl = YT921X_STP_PORTn_BLOCKING(port); + break; + } + + mutex_lock(&priv->reg_lock); + do { + res = yt921x_reg_update_bits(priv, YT921X_STPn(0), mask, ctrl); + if (res) + break; + + mask = YT921X_PORT_LEARN_DIS; + ctrl = !learning ? YT921X_PORT_LEARN_DIS : 0; + res = yt921x_reg_update_bits(priv, YT921X_PORTn_LEARN(port), + mask, ctrl); + } while (0); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dev, "Failed to %s port %d: %i\n", "set STP state for", + port, res); +} + +static int yt921x_port_down(struct yt921x_priv *priv, int port) +{ + u32 mask; + int res; + + mask = YT921X_PORT_LINK | YT921X_PORT_RX_MAC_EN | YT921X_PORT_TX_MAC_EN; + res = yt921x_reg_clear_bits(priv, YT921X_PORTn_CTRL(port), mask); + if (res) + return res; + + if (yt921x_port_is_external(port)) { + mask = YT921X_SERDES_LINK; + res = yt921x_reg_clear_bits(priv, YT921X_SERDESn(port), mask); + if (res) + return res; + + mask = YT921X_XMII_LINK; + res = yt921x_reg_clear_bits(priv, YT921X_XMIIn(port), mask); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_port_up(struct yt921x_priv *priv, int port, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + u32 mask; + u32 ctrl; + int res; + + switch (speed) { + case SPEED_10: + ctrl = YT921X_PORT_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_PORT_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_PORT_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_PORT_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_PORT_SPEED_10000; + break; + default: + return -EINVAL; + } + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_PORT_DUPLEX_FULL; + if (tx_pause) + ctrl |= YT921X_PORT_TX_PAUSE; + if (rx_pause) + ctrl |= YT921X_PORT_RX_PAUSE; + ctrl |= YT921X_PORT_RX_MAC_EN | YT921X_PORT_TX_MAC_EN; + res = yt921x_reg_write(priv, YT921X_PORTn_CTRL(port), ctrl); + if (res) + return res; + + if (yt921x_port_is_external(port)) { + mask = YT921X_SERDES_SPEED_M; + switch (speed) { + case SPEED_10: + ctrl = YT921X_SERDES_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_SERDES_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_SERDES_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_SERDES_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_SERDES_SPEED_10000; + break; + default: + return -EINVAL; + } + mask |= YT921X_SERDES_DUPLEX_FULL; + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_SERDES_DUPLEX_FULL; + mask |= YT921X_SERDES_TX_PAUSE; + if (tx_pause) + ctrl |= YT921X_SERDES_TX_PAUSE; + mask |= YT921X_SERDES_RX_PAUSE; + if (rx_pause) + ctrl |= YT921X_SERDES_RX_PAUSE; + mask |= YT921X_SERDES_LINK; + ctrl |= YT921X_SERDES_LINK; + res = yt921x_reg_update_bits(priv, YT921X_SERDESn(port), + mask, ctrl); + if (res) + return res; + + mask = YT921X_XMII_LINK; + res = yt921x_reg_set_bits(priv, YT921X_XMIIn(port), mask); + if (res) + return res; + + switch (speed) { + case SPEED_10: + ctrl = YT921X_MDIO_POLLING_SPEED_10; + break; + case SPEED_100: + ctrl = YT921X_MDIO_POLLING_SPEED_100; + break; + case SPEED_1000: + ctrl = YT921X_MDIO_POLLING_SPEED_1000; + break; + case SPEED_2500: + ctrl = YT921X_MDIO_POLLING_SPEED_2500; + break; + case SPEED_10000: + ctrl = YT921X_MDIO_POLLING_SPEED_10000; + break; + default: + return -EINVAL; + } + if (duplex == DUPLEX_FULL) + ctrl |= YT921X_MDIO_POLLING_DUPLEX_FULL; + ctrl |= YT921X_MDIO_POLLING_LINK; + res = yt921x_reg_write(priv, YT921X_MDIO_POLLINGn(port), ctrl); + if (res) + return res; + } + + return 0; +} + +static int +yt921x_port_config(struct yt921x_priv *priv, int port, unsigned int mode, + phy_interface_t interface) +{ + struct device *dev = to_device(priv); + u32 mask; + u32 ctrl; + int res; + + if (!yt921x_port_is_external(port)) { + if (interface != PHY_INTERFACE_MODE_INTERNAL) { + dev_err(dev, "Wrong mode %d on port %d\n", + interface, port); + return -EINVAL; + } + return 0; + } + + switch (interface) { + /* SERDES */ + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_100BASEX: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + mask = YT921X_SERDES_CTRL_PORTn(port); + res = yt921x_reg_set_bits(priv, YT921X_SERDES_CTRL, mask); + if (res) + return res; + + mask = YT921X_XMII_CTRL_PORTn(port); + res = yt921x_reg_clear_bits(priv, YT921X_XMII_CTRL, mask); + if (res) + return res; + + mask = YT921X_SERDES_MODE_M; + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + ctrl = YT921X_SERDES_MODE_SGMII; + break; + case PHY_INTERFACE_MODE_100BASEX: + ctrl = YT921X_SERDES_MODE_100BASEX; + break; + case PHY_INTERFACE_MODE_1000BASEX: + ctrl = YT921X_SERDES_MODE_1000BASEX; + break; + case PHY_INTERFACE_MODE_2500BASEX: + ctrl = YT921X_SERDES_MODE_2500BASEX; + break; + default: + return -EINVAL; + } + res = yt921x_reg_update_bits(priv, YT921X_SERDESn(port), + mask, ctrl); + if (res) + return res; + + break; + /* add XMII support here */ + default: + return -EINVAL; + } + + return 0; +} + +static void +yt921x_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + /* No need to sync; port control block is hold until device remove */ + cancel_delayed_work(&priv->ports[port].mib_read); + + mutex_lock(&priv->reg_lock); + res = yt921x_port_down(priv, port); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "bring down", + port, res); +} + +static void +yt921x_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, unsigned int mode, + phy_interface_t interface, int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_up(priv, port, mode, interface, speed, duplex, + tx_pause, rx_pause); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "bring up", + port, res); + + schedule_delayed_work(&priv->ports[port].mib_read, 0); +} + +static void +yt921x_phylink_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct yt921x_priv *priv = to_yt921x_priv(dp->ds); + int port = dp->index; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_config(priv, port, mode, state->interface); + mutex_unlock(&priv->reg_lock); + + if (res) + dev_err(dp->ds->dev, "Failed to %s port %d: %i\n", "config", + port, res); +} + +static void +yt921x_dsa_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + const struct yt921x_info *info = priv->info; + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + + if (info->internal_mask & BIT(port)) { + /* Port 10 for MCU should probably go here too. But since that + * is untested yet, turn it down for the moment by letting it + * fall to the default branch. + */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + } else if (info->external_mask & BIT(port)) { + /* TODO: external ports may support SERDES only, XMII only, or + * SERDES + XMII depending on the chip. However, we can't get + * the accurate config table due to lack of document, thus + * we simply declare SERDES + XMII and rely on the correctness + * of devicetree for now. + */ + + /* SERDES */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + /* REVSGMII (SGMII in PHY role) should go here, once + * PHY_INTERFACE_MODE_REVSGMII is introduced. + */ + __set_bit(PHY_INTERFACE_MODE_100BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + config->mac_capabilities |= MAC_2500FD; + + /* XMII */ + + /* Not tested. To add support for XMII: + * - Add proper interface modes below + * - Handle them in yt921x_port_config() + */ + } + /* no such port: empty supported_interfaces causes phylink to turn it + * down + */ +} + +static int yt921x_port_setup(struct yt921x_priv *priv, int port) +{ + struct dsa_switch *ds = &priv->ds; + u32 ctrl; + int res; + + res = yt921x_userport_standalone(priv, port); + if (res) + return res; + + if (dsa_is_cpu_port(ds, port)) { + /* Egress of CPU port is supposed to be completely controlled + * via tagging, so set to oneway isolated (drop all packets + * without tag). + */ + ctrl = ~(u32)0; + res = yt921x_reg_write(priv, YT921X_PORTn_ISOLATION(port), + ctrl); + if (res) + return res; + + /* To simplify FDB "isolation" simulation, we also disable + * learning on the CPU port, and let software identify packets + * towarding CPU (either trapped or a static FDB entry is + * matched, no matter which bridge that entry is for), which is + * already done by yt921x_userport_standalone(). As a result, + * VLAN-awareness becomes unrelated on the CPU port (set to + * VLAN-unaware by the way). + */ + } + + return 0; +} + +static enum dsa_tag_protocol +yt921x_dsa_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol m) +{ + return DSA_TAG_PROTO_YT921X; +} + +static int yt921x_dsa_port_setup(struct dsa_switch *ds, int port) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_port_setup(priv, port); + mutex_unlock(&priv->reg_lock); + + return res; +} + +static int yt921x_edata_wait(struct yt921x_priv *priv, u32 *valp) +{ + u32 val = YT921X_EDATA_DATA_IDLE; + int res; + + res = yt921x_reg_wait(priv, YT921X_EDATA_DATA, + YT921X_EDATA_DATA_STATUS_M, &val); + if (res) + return res; + + *valp = val; + return 0; +} + +static int +yt921x_edata_read_cont(struct yt921x_priv *priv, u8 addr, u8 *valp) +{ + u32 ctrl; + u32 val; + int res; + + ctrl = YT921X_EDATA_CTRL_ADDR(addr) | YT921X_EDATA_CTRL_READ; + res = yt921x_reg_write(priv, YT921X_EDATA_CTRL, ctrl); + if (res) + return res; + res = yt921x_edata_wait(priv, &val); + if (res) + return res; + + *valp = FIELD_GET(YT921X_EDATA_DATA_DATA_M, val); + return 0; +} + +static int yt921x_edata_read(struct yt921x_priv *priv, u8 addr, u8 *valp) +{ + u32 val; + int res; + + res = yt921x_edata_wait(priv, &val); + if (res) + return res; + return yt921x_edata_read_cont(priv, addr, valp); +} + +static int yt921x_chip_detect(struct yt921x_priv *priv) +{ + struct device *dev = to_device(priv); + const struct yt921x_info *info; + u8 extmode; + u32 chipid; + u32 major; + u32 mode; + int res; + + res = yt921x_reg_read(priv, YT921X_CHIP_ID, &chipid); + if (res) + return res; + + major = FIELD_GET(YT921X_CHIP_ID_MAJOR, chipid); + + for (info = yt921x_infos; info->name; info++) + if (info->major == major) + break; + if (!info->name) { + dev_err(dev, "Unexpected chipid 0x%x\n", chipid); + return -ENODEV; + } + + res = yt921x_reg_read(priv, YT921X_CHIP_MODE, &mode); + if (res) + return res; + res = yt921x_edata_read(priv, YT921X_EDATA_EXTMODE, &extmode); + if (res) + return res; + + for (; info->name; info++) + if (info->major == major && info->mode == mode && + info->extmode == extmode) + break; + if (!info->name) { + dev_err(dev, + "Unsupported chipid 0x%x with chipmode 0x%x 0x%x\n", + chipid, mode, extmode); + return -ENODEV; + } + + /* Print chipid here since we are interested in lower 16 bits */ + dev_info(dev, + "Motorcomm %s ethernet switch, chipid: 0x%x, chipmode: 0x%x 0x%x\n", + info->name, chipid, mode, extmode); + + priv->info = info; + return 0; +} + +static int yt921x_chip_reset(struct yt921x_priv *priv) +{ + struct device *dev = to_device(priv); + u16 eth_p_tag; + u32 val; + int res; + + res = yt921x_chip_detect(priv); + if (res) + return res; + + /* Reset */ + res = yt921x_reg_write(priv, YT921X_RST, YT921X_RST_HW); + if (res) + return res; + + /* RST_HW is almost same as GPIO hard reset, so we need this delay. */ + fsleep(YT921X_RST_DELAY_US); + + val = 0; + res = yt921x_reg_wait(priv, YT921X_RST, ~0, &val); + if (res) + return res; + + /* Check for tag EtherType; do it after reset in case you messed it up + * before. + */ + res = yt921x_reg_read(priv, YT921X_CPU_TAG_TPID, &val); + if (res) + return res; + eth_p_tag = FIELD_GET(YT921X_CPU_TAG_TPID_TPID_M, val); + if (eth_p_tag != ETH_P_YT921X) { + dev_err(dev, "Tag type 0x%x != 0x%x\n", eth_p_tag, + ETH_P_YT921X); + /* Despite being possible, we choose not to set CPU_TAG_TPID, + * since there is no way it can be different unless you have the + * wrong chip. + */ + return -EINVAL; + } + + return 0; +} + +static int yt921x_chip_setup(struct yt921x_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + unsigned long cpu_ports_mask; + u64 ctrl64; + u32 ctrl; + int port; + int res; + + /* Enable DSA */ + priv->cpu_ports_mask = dsa_cpu_ports(ds); + + ctrl = YT921X_EXT_CPU_PORT_TAG_EN | YT921X_EXT_CPU_PORT_PORT_EN | + YT921X_EXT_CPU_PORT_PORT(__ffs(priv->cpu_ports_mask)); + res = yt921x_reg_write(priv, YT921X_EXT_CPU_PORT, ctrl); + if (res) + return res; + + /* Enable and clear MIB */ + res = yt921x_reg_set_bits(priv, YT921X_FUNC, YT921X_FUNC_MIB); + if (res) + return res; + + ctrl = YT921X_MIB_CTRL_CLEAN | YT921X_MIB_CTRL_ALL_PORT; + res = yt921x_reg_write(priv, YT921X_MIB_CTRL, ctrl); + if (res) + return res; + + /* Setup software switch */ + ctrl = YT921X_CPU_COPY_TO_EXT_CPU; + res = yt921x_reg_write(priv, YT921X_CPU_COPY, ctrl); + if (res) + return res; + + ctrl = GENMASK(10, 0); + res = yt921x_reg_write(priv, YT921X_FILTER_UNK_UCAST, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_FILTER_UNK_MCAST, ctrl); + if (res) + return res; + + /* YT921x does not support native DSA port bridging, so we use port + * isolation to emulate it. However, be especially careful that port + * isolation takes _after_ FDB lookups, i.e. if an FDB entry (from + * another bridge) is matched and the destination port (in another + * bridge) is blocked, the packet will be dropped instead of flooding to + * the "bridged" ports, thus we need to trap and handle those packets by + * software. + * + * If there is no more than one bridge, we might be able to drop them + * directly given some conditions are met, but we trap them in all cases + * for now. + */ + ctrl = 0; + for (int i = 0; i < YT921X_PORT_NUM; i++) + ctrl |= YT921X_ACT_UNK_ACTn_TRAP(i); + /* Except for CPU ports, if any packets are sent via CPU ports without + * tag, they should be dropped. + */ + cpu_ports_mask = priv->cpu_ports_mask; + for_each_set_bit(port, &cpu_ports_mask, YT921X_PORT_NUM) { + ctrl &= ~YT921X_ACT_UNK_ACTn_M(port); + ctrl |= YT921X_ACT_UNK_ACTn_DROP(port); + } + res = yt921x_reg_write(priv, YT921X_ACT_UNK_UCAST, ctrl); + if (res) + return res; + res = yt921x_reg_write(priv, YT921X_ACT_UNK_MCAST, ctrl); + if (res) + return res; + + /* Tagged VID 0 should be treated as untagged, which confuses the + * hardware a lot + */ + ctrl64 = YT921X_VLAN_CTRL_LEARN_DIS | YT921X_VLAN_CTRL_PORTS_M; + res = yt921x_reg64_write(priv, YT921X_VLANn_CTRL(0), ctrl64); + if (res) + return res; + + /* Miscellaneous */ + res = yt921x_reg_set_bits(priv, YT921X_SENSOR, YT921X_SENSOR_TEMP); + if (res) + return res; + + return 0; +} + +static int yt921x_dsa_setup(struct dsa_switch *ds) +{ + struct yt921x_priv *priv = to_yt921x_priv(ds); + struct device *dev = to_device(priv); + struct device_node *np = dev->of_node; + struct device_node *child; + int res; + + mutex_lock(&priv->reg_lock); + res = yt921x_chip_reset(priv); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + + /* Register the internal mdio bus. Nodes for internal ports should have + * proper phy-handle pointing to their PHYs. Not enabling the internal + * bus is possible, though pretty wired, if internal ports are not used. + */ + child = of_get_child_by_name(np, "mdio"); + if (child) { + res = yt921x_mbus_int_init(priv, child); + of_node_put(child); + if (res) + return res; + } + + /* External mdio bus is optional */ + child = of_get_child_by_name(np, "mdio-external"); + if (child) { + res = yt921x_mbus_ext_init(priv, child); + of_node_put(child); + if (res) + return res; + + dev_err(dev, "Untested external mdio bus\n"); + return -ENODEV; + } + + mutex_lock(&priv->reg_lock); + res = yt921x_chip_setup(priv); + mutex_unlock(&priv->reg_lock); + + if (res) + return res; + + return 0; +} + +static const struct phylink_mac_ops yt921x_phylink_mac_ops = { + .mac_link_down = yt921x_phylink_mac_link_down, + .mac_link_up = yt921x_phylink_mac_link_up, + .mac_config = yt921x_phylink_mac_config, +}; + +static const struct dsa_switch_ops yt921x_dsa_switch_ops = { + /* mib */ + .get_strings = yt921x_dsa_get_strings, + .get_ethtool_stats = yt921x_dsa_get_ethtool_stats, + .get_sset_count = yt921x_dsa_get_sset_count, + .get_eth_mac_stats = yt921x_dsa_get_eth_mac_stats, + .get_eth_ctrl_stats = yt921x_dsa_get_eth_ctrl_stats, + .get_rmon_stats = yt921x_dsa_get_rmon_stats, + .get_stats64 = yt921x_dsa_get_stats64, + .get_pause_stats = yt921x_dsa_get_pause_stats, + /* eee */ + .support_eee = dsa_supports_eee, + .set_mac_eee = yt921x_dsa_set_mac_eee, + /* mtu */ + .port_change_mtu = yt921x_dsa_port_change_mtu, + .port_max_mtu = yt921x_dsa_port_max_mtu, + /* hsr */ + .port_hsr_leave = dsa_port_simple_hsr_leave, + .port_hsr_join = dsa_port_simple_hsr_join, + /* mirror */ + .port_mirror_del = yt921x_dsa_port_mirror_del, + .port_mirror_add = yt921x_dsa_port_mirror_add, + /* fdb */ + .port_fdb_dump = yt921x_dsa_port_fdb_dump, + .port_fast_age = yt921x_dsa_port_fast_age, + .set_ageing_time = yt921x_dsa_set_ageing_time, + .port_fdb_del = yt921x_dsa_port_fdb_del, + .port_fdb_add = yt921x_dsa_port_fdb_add, + .port_mdb_del = yt921x_dsa_port_mdb_del, + .port_mdb_add = yt921x_dsa_port_mdb_add, + /* vlan */ + .port_vlan_filtering = yt921x_dsa_port_vlan_filtering, + .port_vlan_del = yt921x_dsa_port_vlan_del, + .port_vlan_add = yt921x_dsa_port_vlan_add, + /* bridge */ + .port_pre_bridge_flags = yt921x_dsa_port_pre_bridge_flags, + .port_bridge_flags = yt921x_dsa_port_bridge_flags, + .port_bridge_leave = yt921x_dsa_port_bridge_leave, + .port_bridge_join = yt921x_dsa_port_bridge_join, + /* mst */ + .port_mst_state_set = yt921x_dsa_port_mst_state_set, + .vlan_msti_set = yt921x_dsa_vlan_msti_set, + .port_stp_state_set = yt921x_dsa_port_stp_state_set, + /* port */ + .get_tag_protocol = yt921x_dsa_get_tag_protocol, + .phylink_get_caps = yt921x_dsa_phylink_get_caps, + .port_setup = yt921x_dsa_port_setup, + /* chip */ + .setup = yt921x_dsa_setup, +}; + +static void yt921x_mdio_shutdown(struct mdio_device *mdiodev) +{ + struct yt921x_priv *priv = mdiodev_get_drvdata(mdiodev); + + if (!priv) + return; + + dsa_switch_shutdown(&priv->ds); +} + +static void yt921x_mdio_remove(struct mdio_device *mdiodev) +{ + struct yt921x_priv *priv = mdiodev_get_drvdata(mdiodev); + + if (!priv) + return; + + for (size_t i = ARRAY_SIZE(priv->ports); i-- > 0; ) { + struct yt921x_port *pp = &priv->ports[i]; + + disable_delayed_work_sync(&pp->mib_read); + } + + dsa_unregister_switch(&priv->ds); + + mutex_destroy(&priv->reg_lock); +} + +static int yt921x_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + struct yt921x_reg_mdio *mdio; + struct yt921x_priv *priv; + struct dsa_switch *ds; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mdio = devm_kzalloc(dev, sizeof(*mdio), GFP_KERNEL); + if (!mdio) + return -ENOMEM; + + mdio->bus = mdiodev->bus; + mdio->addr = mdiodev->addr; + mdio->switchid = 0; + + mutex_init(&priv->reg_lock); + + priv->reg_ops = &yt921x_reg_ops_mdio; + priv->reg_ctx = mdio; + + for (size_t i = 0; i < ARRAY_SIZE(priv->ports); i++) { + struct yt921x_port *pp = &priv->ports[i]; + + pp->index = i; + INIT_DELAYED_WORK(&pp->mib_read, yt921x_poll_mib); + } + + ds = &priv->ds; + ds->dev = dev; + ds->assisted_learning_on_cpu_port = true; + ds->priv = priv; + ds->ops = &yt921x_dsa_switch_ops; + ds->ageing_time_min = 1 * 5000; + ds->ageing_time_max = U16_MAX * 5000; + ds->phylink_mac_ops = &yt921x_phylink_mac_ops; + ds->num_ports = YT921X_PORT_NUM; + + mdiodev_set_drvdata(mdiodev, priv); + + return dsa_register_switch(ds); +} + +static const struct of_device_id yt921x_of_match[] = { + { .compatible = "motorcomm,yt9215" }, + {} +}; +MODULE_DEVICE_TABLE(of, yt921x_of_match); + +static struct mdio_driver yt921x_mdio_driver = { + .probe = yt921x_mdio_probe, + .remove = yt921x_mdio_remove, + .shutdown = yt921x_mdio_shutdown, + .mdiodrv.driver = { + .name = YT921X_NAME, + .of_match_table = yt921x_of_match, + }, +}; + +mdio_module_driver(yt921x_mdio_driver); + +MODULE_AUTHOR("David Yang <mmyangfl@gmail.com>"); +MODULE_DESCRIPTION("Driver for Motorcomm YT921x Switch"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dsa/yt921x.h b/drivers/net/dsa/yt921x.h new file mode 100644 index 000000000000..61bb0ab3b09a --- /dev/null +++ b/drivers/net/dsa/yt921x.h @@ -0,0 +1,567 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2025 David Yang + */ + +#ifndef __YT921X_H +#define __YT921X_H + +#include <net/dsa.h> + +#define YT921X_SMI_SWITCHID_M GENMASK(3, 2) +#define YT921X_SMI_SWITCHID(x) FIELD_PREP(YT921X_SMI_SWITCHID_M, (x)) +#define YT921X_SMI_AD BIT(1) +#define YT921X_SMI_ADDR 0 +#define YT921X_SMI_DATA YT921X_SMI_AD +#define YT921X_SMI_RW BIT(0) +#define YT921X_SMI_WRITE 0 +#define YT921X_SMI_READ YT921X_SMI_RW + +#define YT921X_SWITCHID_NUM 4 + +#define YT921X_RST 0x80000 +#define YT921X_RST_HW BIT(31) +#define YT921X_RST_SW BIT(1) +#define YT921X_FUNC 0x80004 +#define YT921X_FUNC_MIB BIT(1) +#define YT921X_CHIP_ID 0x80008 +#define YT921X_CHIP_ID_MAJOR GENMASK(31, 16) +#define YT921X_EXT_CPU_PORT 0x8000c +#define YT921X_EXT_CPU_PORT_TAG_EN BIT(15) +#define YT921X_EXT_CPU_PORT_PORT_EN BIT(14) +#define YT921X_EXT_CPU_PORT_PORT_M GENMASK(3, 0) +#define YT921X_EXT_CPU_PORT_PORT(x) FIELD_PREP(YT921X_EXT_CPU_PORT_PORT_M, (x)) +#define YT921X_CPU_TAG_TPID 0x80010 +#define YT921X_CPU_TAG_TPID_TPID_M GENMASK(15, 0) +/* Same as ETH_P_YT921X, but this represents the true HW default, while the + * former is a local convention chosen by us. + */ +#define YT921X_CPU_TAG_TPID_TPID_DEFAULT 0x9988 +#define YT921X_PVID_SEL 0x80014 +#define YT921X_PVID_SEL_SVID_PORTn(port) BIT(port) +#define YT921X_SERDES_CTRL 0x80028 +#define YT921X_SERDES_CTRL_PORTn_TEST(port) BIT((port) - 3) +#define YT921X_SERDES_CTRL_PORTn(port) BIT((port) - 8) +#define YT921X_IO_LEVEL 0x80030 +#define YT9215_IO_LEVEL_NORMAL_M GENMASK(5, 4) +#define YT9215_IO_LEVEL_NORMAL(x) FIELD_PREP(YT9215_IO_LEVEL_NORMAL_M, (x)) +#define YT9215_IO_LEVEL_NORMAL_3V3 YT9215_IO_LEVEL_NORMAL(0) +#define YT9215_IO_LEVEL_NORMAL_1V8 YT9215_IO_LEVEL_NORMAL(3) +#define YT9215_IO_LEVEL_RGMII1_M GENMASK(3, 2) +#define YT9215_IO_LEVEL_RGMII1(x) FIELD_PREP(YT9215_IO_LEVEL_RGMII1_M, (x)) +#define YT9215_IO_LEVEL_RGMII1_3V3 YT9215_IO_LEVEL_RGMII1(0) +#define YT9215_IO_LEVEL_RGMII1_2V5 YT9215_IO_LEVEL_RGMII1(1) +#define YT9215_IO_LEVEL_RGMII1_1V8 YT9215_IO_LEVEL_RGMII1(2) +#define YT9215_IO_LEVEL_RGMII0_M GENMASK(1, 0) +#define YT9215_IO_LEVEL_RGMII0(x) FIELD_PREP(YT9215_IO_LEVEL_RGMII0_M, (x)) +#define YT9215_IO_LEVEL_RGMII0_3V3 YT9215_IO_LEVEL_RGMII0(0) +#define YT9215_IO_LEVEL_RGMII0_2V5 YT9215_IO_LEVEL_RGMII0(1) +#define YT9215_IO_LEVEL_RGMII0_1V8 YT9215_IO_LEVEL_RGMII0(2) +#define YT9218_IO_LEVEL_RGMII1_M GENMASK(5, 4) +#define YT9218_IO_LEVEL_RGMII1(x) FIELD_PREP(YT9218_IO_LEVEL_RGMII1_M, (x)) +#define YT9218_IO_LEVEL_RGMII1_3V3 YT9218_IO_LEVEL_RGMII1(0) +#define YT9218_IO_LEVEL_RGMII1_2V5 YT9218_IO_LEVEL_RGMII1(1) +#define YT9218_IO_LEVEL_RGMII1_1V8 YT9218_IO_LEVEL_RGMII1(2) +#define YT9218_IO_LEVEL_RGMII0_M GENMASK(3, 2) +#define YT9218_IO_LEVEL_RGMII0(x) FIELD_PREP(YT9218_IO_LEVEL_RGMII0_M, (x)) +#define YT9218_IO_LEVEL_RGMII0_3V3 YT9218_IO_LEVEL_RGMII0(0) +#define YT9218_IO_LEVEL_RGMII0_2V5 YT9218_IO_LEVEL_RGMII0(1) +#define YT9218_IO_LEVEL_RGMII0_1V8 YT9218_IO_LEVEL_RGMII0(2) +#define YT9218_IO_LEVEL_NORMAL_M GENMASK(1, 0) +#define YT9218_IO_LEVEL_NORMAL(x) FIELD_PREP(YT9218_IO_LEVEL_NORMAL_M, (x)) +#define YT9218_IO_LEVEL_NORMAL_3V3 YT9218_IO_LEVEL_NORMAL(0) +#define YT9218_IO_LEVEL_NORMAL_1V8 YT9218_IO_LEVEL_NORMAL(3) +#define YT921X_MAC_ADDR_HI2 0x80080 +#define YT921X_MAC_ADDR_LO4 0x80084 +#define YT921X_SERDESn(port) (0x8008c + 4 * ((port) - 8)) +#define YT921X_SERDES_MODE_M GENMASK(9, 7) +#define YT921X_SERDES_MODE(x) FIELD_PREP(YT921X_SERDES_MODE_M, (x)) +#define YT921X_SERDES_MODE_SGMII YT921X_SERDES_MODE(0) +#define YT921X_SERDES_MODE_REVSGMII YT921X_SERDES_MODE(1) +#define YT921X_SERDES_MODE_1000BASEX YT921X_SERDES_MODE(2) +#define YT921X_SERDES_MODE_100BASEX YT921X_SERDES_MODE(3) +#define YT921X_SERDES_MODE_2500BASEX YT921X_SERDES_MODE(4) +#define YT921X_SERDES_RX_PAUSE BIT(6) +#define YT921X_SERDES_TX_PAUSE BIT(5) +#define YT921X_SERDES_LINK BIT(4) /* force link */ +#define YT921X_SERDES_DUPLEX_FULL BIT(3) +#define YT921X_SERDES_SPEED_M GENMASK(2, 0) +#define YT921X_SERDES_SPEED(x) FIELD_PREP(YT921X_SERDES_SPEED_M, (x)) +#define YT921X_SERDES_SPEED_10 YT921X_SERDES_SPEED(0) +#define YT921X_SERDES_SPEED_100 YT921X_SERDES_SPEED(1) +#define YT921X_SERDES_SPEED_1000 YT921X_SERDES_SPEED(2) +#define YT921X_SERDES_SPEED_10000 YT921X_SERDES_SPEED(3) +#define YT921X_SERDES_SPEED_2500 YT921X_SERDES_SPEED(4) +#define YT921X_PORTn_CTRL(port) (0x80100 + 4 * (port)) +#define YT921X_PORT_CTRL_PAUSE_AN BIT(10) +#define YT921X_PORTn_STATUS(port) (0x80200 + 4 * (port)) +#define YT921X_PORT_LINK BIT(9) /* CTRL: auto negotiation */ +#define YT921X_PORT_HALF_PAUSE BIT(8) /* Half-duplex back pressure mode */ +#define YT921X_PORT_DUPLEX_FULL BIT(7) +#define YT921X_PORT_RX_PAUSE BIT(6) +#define YT921X_PORT_TX_PAUSE BIT(5) +#define YT921X_PORT_RX_MAC_EN BIT(4) +#define YT921X_PORT_TX_MAC_EN BIT(3) +#define YT921X_PORT_SPEED_M GENMASK(2, 0) +#define YT921X_PORT_SPEED(x) FIELD_PREP(YT921X_PORT_SPEED_M, (x)) +#define YT921X_PORT_SPEED_10 YT921X_PORT_SPEED(0) +#define YT921X_PORT_SPEED_100 YT921X_PORT_SPEED(1) +#define YT921X_PORT_SPEED_1000 YT921X_PORT_SPEED(2) +#define YT921X_PORT_SPEED_10000 YT921X_PORT_SPEED(3) +#define YT921X_PORT_SPEED_2500 YT921X_PORT_SPEED(4) +#define YT921X_PON_STRAP_FUNC 0x80320 +#define YT921X_PON_STRAP_VAL 0x80324 +#define YT921X_PON_STRAP_CAP 0x80328 +#define YT921X_PON_STRAP_EEE BIT(16) +#define YT921X_PON_STRAP_LOOP_DETECT BIT(7) +#define YT921X_MDIO_POLLINGn(port) (0x80364 + 4 * ((port) - 8)) +#define YT921X_MDIO_POLLING_DUPLEX_FULL BIT(4) +#define YT921X_MDIO_POLLING_LINK BIT(3) +#define YT921X_MDIO_POLLING_SPEED_M GENMASK(2, 0) +#define YT921X_MDIO_POLLING_SPEED(x) FIELD_PREP(YT921X_MDIO_POLLING_SPEED_M, (x)) +#define YT921X_MDIO_POLLING_SPEED_10 YT921X_MDIO_POLLING_SPEED(0) +#define YT921X_MDIO_POLLING_SPEED_100 YT921X_MDIO_POLLING_SPEED(1) +#define YT921X_MDIO_POLLING_SPEED_1000 YT921X_MDIO_POLLING_SPEED(2) +#define YT921X_MDIO_POLLING_SPEED_10000 YT921X_MDIO_POLLING_SPEED(3) +#define YT921X_MDIO_POLLING_SPEED_2500 YT921X_MDIO_POLLING_SPEED(4) +#define YT921X_SENSOR 0x8036c +#define YT921X_SENSOR_TEMP BIT(18) +#define YT921X_TEMP 0x80374 +#define YT921X_CHIP_MODE 0x80388 +#define YT921X_CHIP_MODE_MODE GENMASK(1, 0) +#define YT921X_XMII_CTRL 0x80394 +#define YT921X_XMII_CTRL_PORTn(port) BIT(9 - (port)) /* Yes, it's reversed */ +#define YT921X_XMIIn(port) (0x80400 + 8 * ((port) - 8)) +#define YT921X_XMII_MODE_M GENMASK(31, 29) +#define YT921X_XMII_MODE(x) FIELD_PREP(YT921X_XMII_MODE_M, (x)) +#define YT921X_XMII_MODE_MII YT921X_XMII_MODE(0) +#define YT921X_XMII_MODE_REVMII YT921X_XMII_MODE(1) +#define YT921X_XMII_MODE_RMII YT921X_XMII_MODE(2) +#define YT921X_XMII_MODE_REVRMII YT921X_XMII_MODE(3) +#define YT921X_XMII_MODE_RGMII YT921X_XMII_MODE(4) +#define YT921X_XMII_MODE_DISABLE YT921X_XMII_MODE(5) +#define YT921X_XMII_LINK BIT(19) /* force link */ +#define YT921X_XMII_EN BIT(18) +#define YT921X_XMII_SOFT_RST BIT(17) +#define YT921X_XMII_RGMII_TX_DELAY_150PS_M GENMASK(16, 13) +#define YT921X_XMII_RGMII_TX_DELAY_150PS(x) FIELD_PREP(YT921X_XMII_RGMII_TX_DELAY_150PS_M, (x)) +#define YT921X_XMII_TX_CLK_IN BIT(11) +#define YT921X_XMII_RX_CLK_IN BIT(10) +#define YT921X_XMII_RGMII_TX_DELAY_2NS BIT(8) +#define YT921X_XMII_RGMII_TX_CLK_OUT BIT(7) +#define YT921X_XMII_RGMII_RX_DELAY_150PS_M GENMASK(6, 3) +#define YT921X_XMII_RGMII_RX_DELAY_150PS(x) FIELD_PREP(YT921X_XMII_RGMII_RX_DELAY_150PS_M, (x)) +#define YT921X_XMII_RMII_PHY_TX_CLK_OUT BIT(2) +#define YT921X_XMII_REVMII_TX_CLK_OUT BIT(1) +#define YT921X_XMII_REVMII_RX_CLK_OUT BIT(0) + +#define YT921X_MACn_FRAME(port) (0x81008 + 0x1000 * (port)) +#define YT921X_MAC_FRAME_SIZE_M GENMASK(21, 8) +#define YT921X_MAC_FRAME_SIZE(x) FIELD_PREP(YT921X_MAC_FRAME_SIZE_M, (x)) + +#define YT921X_EEEn_VAL(port) (0xa0000 + 0x40 * (port)) +#define YT921X_EEE_VAL_DATA BIT(1) + +#define YT921X_EEE_CTRL 0xb0000 +#define YT921X_EEE_CTRL_ENn(port) BIT(port) + +#define YT921X_MIB_CTRL 0xc0004 +#define YT921X_MIB_CTRL_CLEAN BIT(30) +#define YT921X_MIB_CTRL_PORT_M GENMASK(6, 3) +#define YT921X_MIB_CTRL_PORT(x) FIELD_PREP(YT921X_MIB_CTRL_PORT_M, (x)) +#define YT921X_MIB_CTRL_ONE_PORT BIT(1) +#define YT921X_MIB_CTRL_ALL_PORT BIT(0) +#define YT921X_MIBn_DATA0(port) (0xc0100 + 0x100 * (port)) +#define YT921X_MIBn_DATAm(port, x) (YT921X_MIBn_DATA0(port) + 4 * (x)) +#define YT921X_MIB_DATA_RX_BROADCAST 0x00 +#define YT921X_MIB_DATA_RX_PAUSE 0x04 +#define YT921X_MIB_DATA_RX_MULTICAST 0x08 +#define YT921X_MIB_DATA_RX_CRC_ERR 0x0c + +#define YT921X_MIB_DATA_RX_ALIGN_ERR 0x10 +#define YT921X_MIB_DATA_RX_UNDERSIZE_ERR 0x14 +#define YT921X_MIB_DATA_RX_FRAG_ERR 0x18 +#define YT921X_MIB_DATA_RX_PKT_SZ_64 0x1c + +#define YT921X_MIB_DATA_RX_PKT_SZ_65_TO_127 0x20 +#define YT921X_MIB_DATA_RX_PKT_SZ_128_TO_255 0x24 +#define YT921X_MIB_DATA_RX_PKT_SZ_256_TO_511 0x28 +#define YT921X_MIB_DATA_RX_PKT_SZ_512_TO_1023 0x2c + +#define YT921X_MIB_DATA_RX_PKT_SZ_1024_TO_1518 0x30 +#define YT921X_MIB_DATA_RX_PKT_SZ_1519_TO_MAX 0x34 +/* 0x38: unused */ +#define YT921X_MIB_DATA_RX_GOOD_BYTES 0x3c + +/* 0x40: 64 bytes */ +#define YT921X_MIB_DATA_RX_BAD_BYTES 0x44 +/* 0x48: 64 bytes */ +#define YT921X_MIB_DATA_RX_OVERSIZE_ERR 0x4c + +#define YT921X_MIB_DATA_RX_DROPPED 0x50 +#define YT921X_MIB_DATA_TX_BROADCAST 0x54 +#define YT921X_MIB_DATA_TX_PAUSE 0x58 +#define YT921X_MIB_DATA_TX_MULTICAST 0x5c + +#define YT921X_MIB_DATA_TX_UNDERSIZE_ERR 0x60 +#define YT921X_MIB_DATA_TX_PKT_SZ_64 0x64 +#define YT921X_MIB_DATA_TX_PKT_SZ_65_TO_127 0x68 +#define YT921X_MIB_DATA_TX_PKT_SZ_128_TO_255 0x6c + +#define YT921X_MIB_DATA_TX_PKT_SZ_256_TO_511 0x70 +#define YT921X_MIB_DATA_TX_PKT_SZ_512_TO_1023 0x74 +#define YT921X_MIB_DATA_TX_PKT_SZ_1024_TO_1518 0x78 +#define YT921X_MIB_DATA_TX_PKT_SZ_1519_TO_MAX 0x7c + +/* 0x80: unused */ +#define YT921X_MIB_DATA_TX_GOOD_BYTES 0x84 +/* 0x88: 64 bytes */ +#define YT921X_MIB_DATA_TX_COLLISION 0x8c + +#define YT921X_MIB_DATA_TX_EXCESSIVE_COLLISION 0x90 +#define YT921X_MIB_DATA_TX_MULTIPLE_COLLISION 0x94 +#define YT921X_MIB_DATA_TX_SINGLE_COLLISION 0x98 +#define YT921X_MIB_DATA_TX_PKT 0x9c + +#define YT921X_MIB_DATA_TX_DEFERRED 0xa0 +#define YT921X_MIB_DATA_TX_LATE_COLLISION 0xa4 +#define YT921X_MIB_DATA_RX_OAM 0xa8 +#define YT921X_MIB_DATA_TX_OAM 0xac + +#define YT921X_EDATA_CTRL 0xe0000 +#define YT921X_EDATA_CTRL_ADDR_M GENMASK(15, 8) +#define YT921X_EDATA_CTRL_ADDR(x) FIELD_PREP(YT921X_EDATA_CTRL_ADDR_M, (x)) +#define YT921X_EDATA_CTRL_OP_M GENMASK(3, 0) +#define YT921X_EDATA_CTRL_OP(x) FIELD_PREP(YT921X_EDATA_CTRL_OP_M, (x)) +#define YT921X_EDATA_CTRL_READ YT921X_EDATA_CTRL_OP(5) +#define YT921X_EDATA_DATA 0xe0004 +#define YT921X_EDATA_DATA_DATA_M GENMASK(31, 24) +#define YT921X_EDATA_DATA_STATUS_M GENMASK(3, 0) +#define YT921X_EDATA_DATA_STATUS(x) FIELD_PREP(YT921X_EDATA_DATA_STATUS_M, (x)) +#define YT921X_EDATA_DATA_IDLE YT921X_EDATA_DATA_STATUS(3) + +#define YT921X_EXT_MBUS_OP 0x6a000 +#define YT921X_INT_MBUS_OP 0xf0000 +#define YT921X_MBUS_OP_START BIT(0) +#define YT921X_EXT_MBUS_CTRL 0x6a004 +#define YT921X_INT_MBUS_CTRL 0xf0004 +#define YT921X_MBUS_CTRL_PORT_M GENMASK(25, 21) +#define YT921X_MBUS_CTRL_PORT(x) FIELD_PREP(YT921X_MBUS_CTRL_PORT_M, (x)) +#define YT921X_MBUS_CTRL_REG_M GENMASK(20, 16) +#define YT921X_MBUS_CTRL_REG(x) FIELD_PREP(YT921X_MBUS_CTRL_REG_M, (x)) +#define YT921X_MBUS_CTRL_TYPE_M GENMASK(11, 8) /* wild guess */ +#define YT921X_MBUS_CTRL_TYPE(x) FIELD_PREP(YT921X_MBUS_CTRL_TYPE_M, (x)) +#define YT921X_MBUS_CTRL_TYPE_C22 YT921X_MBUS_CTRL_TYPE(4) +#define YT921X_MBUS_CTRL_OP_M GENMASK(3, 2) /* wild guess */ +#define YT921X_MBUS_CTRL_OP(x) FIELD_PREP(YT921X_MBUS_CTRL_OP_M, (x)) +#define YT921X_MBUS_CTRL_WRITE YT921X_MBUS_CTRL_OP(1) +#define YT921X_MBUS_CTRL_READ YT921X_MBUS_CTRL_OP(2) +#define YT921X_EXT_MBUS_DOUT 0x6a008 +#define YT921X_INT_MBUS_DOUT 0xf0008 +#define YT921X_EXT_MBUS_DIN 0x6a00c +#define YT921X_INT_MBUS_DIN 0xf000c + +#define YT921X_PORTn_EGR(port) (0x100000 + 4 * (port)) +#define YT921X_PORT_EGR_TPID_CTAG_M GENMASK(5, 4) +#define YT921X_PORT_EGR_TPID_CTAG(x) FIELD_PREP(YT921X_PORT_EGR_TPID_CTAG_M, (x)) +#define YT921X_PORT_EGR_TPID_STAG_M GENMASK(3, 2) +#define YT921X_PORT_EGR_TPID_STAG(x) FIELD_PREP(YT921X_PORT_EGR_TPID_STAG_M, (x)) +#define YT921X_TPID_EGRn(x) (0x100300 + 4 * (x)) /* [0, 3] */ +#define YT921X_TPID_EGR_TPID_M GENMASK(15, 0) + +#define YT921X_VLAN_IGR_FILTER 0x180280 +#define YT921X_VLAN_IGR_FILTER_PORTn_BYPASS_IGMP(port) BIT((port) + 11) +#define YT921X_VLAN_IGR_FILTER_PORTn(port) BIT(port) +#define YT921X_PORTn_ISOLATION(port) (0x180294 + 4 * (port)) +#define YT921X_PORT_ISOLATION_BLOCKn(port) BIT(port) +#define YT921X_STPn(n) (0x18038c + 4 * (n)) +#define YT921X_STP_PORTn_M(port) GENMASK(2 * (port) + 1, 2 * (port)) +#define YT921X_STP_PORTn(port, x) ((x) << (2 * (port))) +#define YT921X_STP_PORTn_DISABLED(port) YT921X_STP_PORTn(port, 0) +#define YT921X_STP_PORTn_LEARNING(port) YT921X_STP_PORTn(port, 1) +#define YT921X_STP_PORTn_BLOCKING(port) YT921X_STP_PORTn(port, 2) +#define YT921X_STP_PORTn_FORWARD(port) YT921X_STP_PORTn(port, 3) +#define YT921X_PORTn_LEARN(port) (0x1803d0 + 4 * (port)) +#define YT921X_PORT_LEARN_VID_LEARN_MULTI_EN BIT(22) +#define YT921X_PORT_LEARN_VID_LEARN_MODE BIT(21) +#define YT921X_PORT_LEARN_VID_LEARN_EN BIT(20) +#define YT921X_PORT_LEARN_SUSPEND_COPY_EN BIT(19) +#define YT921X_PORT_LEARN_SUSPEND_DROP_EN BIT(18) +#define YT921X_PORT_LEARN_DIS BIT(17) +#define YT921X_PORT_LEARN_LIMIT_EN BIT(16) +#define YT921X_PORT_LEARN_LIMIT_M GENMASK(15, 8) +#define YT921X_PORT_LEARN_LIMIT(x) FIELD_PREP(YT921X_PORT_LEARN_LIMIT_M, (x)) +#define YT921X_PORT_LEARN_DROP_ON_EXCEEDED BIT(2) +#define YT921X_PORT_LEARN_MODE_M GENMASK(1, 0) +#define YT921X_PORT_LEARN_MODE(x) FIELD_PREP(YT921X_PORT_LEARN_MODE_M, (x)) +#define YT921X_PORT_LEARN_MODE_AUTO YT921X_PORT_LEARN_MODE(0) +#define YT921X_PORT_LEARN_MODE_AUTO_AND_COPY YT921X_PORT_LEARN_MODE(1) +#define YT921X_PORT_LEARN_MODE_CPU_CONTROL YT921X_PORT_LEARN_MODE(2) +#define YT921X_AGEING 0x180440 +#define YT921X_AGEING_INTERVAL_M GENMASK(15, 0) +#define YT921X_FDB_IN0 0x180454 +#define YT921X_FDB_IN1 0x180458 +#define YT921X_FDB_IN2 0x18045c +#define YT921X_FDB_OP 0x180460 +#define YT921X_FDB_OP_INDEX_M GENMASK(22, 11) +#define YT921X_FDB_OP_INDEX(x) FIELD_PREP(YT921X_FDB_OP_INDEX_M, (x)) +#define YT921X_FDB_OP_MODE_INDEX BIT(10) /* mac+fid / index */ +#define YT921X_FDB_OP_FLUSH_MCAST BIT(9) /* ucast / mcast */ +#define YT921X_FDB_OP_FLUSH_M GENMASK(8, 7) +#define YT921X_FDB_OP_FLUSH(x) FIELD_PREP(YT921X_FDB_OP_FLUSH_M, (x)) +#define YT921X_FDB_OP_FLUSH_ALL YT921X_FDB_OP_FLUSH(0) +#define YT921X_FDB_OP_FLUSH_PORT YT921X_FDB_OP_FLUSH(1) +#define YT921X_FDB_OP_FLUSH_PORT_VID YT921X_FDB_OP_FLUSH(2) +#define YT921X_FDB_OP_FLUSH_VID YT921X_FDB_OP_FLUSH(3) +#define YT921X_FDB_OP_FLUSH_STATIC BIT(6) +#define YT921X_FDB_OP_NEXT_TYPE_M GENMASK(5, 4) +#define YT921X_FDB_OP_NEXT_TYPE(x) FIELD_PREP(YT921X_FDB_OP_NEXT_TYPE_M, (x)) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST_PORT YT921X_FDB_OP_NEXT_TYPE(0) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST_VID YT921X_FDB_OP_NEXT_TYPE(1) +#define YT921X_FDB_OP_NEXT_TYPE_UCAST YT921X_FDB_OP_NEXT_TYPE(2) +#define YT921X_FDB_OP_NEXT_TYPE_MCAST YT921X_FDB_OP_NEXT_TYPE(3) +#define YT921X_FDB_OP_OP_M GENMASK(3, 1) +#define YT921X_FDB_OP_OP(x) FIELD_PREP(YT921X_FDB_OP_OP_M, (x)) +#define YT921X_FDB_OP_OP_ADD YT921X_FDB_OP_OP(0) +#define YT921X_FDB_OP_OP_DEL YT921X_FDB_OP_OP(1) +#define YT921X_FDB_OP_OP_GET_ONE YT921X_FDB_OP_OP(2) +#define YT921X_FDB_OP_OP_GET_NEXT YT921X_FDB_OP_OP(3) +#define YT921X_FDB_OP_OP_FLUSH YT921X_FDB_OP_OP(4) +#define YT921X_FDB_OP_START BIT(0) +#define YT921X_FDB_RESULT 0x180464 +#define YT921X_FDB_RESULT_DONE BIT(15) +#define YT921X_FDB_RESULT_NOTFOUND BIT(14) +#define YT921X_FDB_RESULT_OVERWRITED BIT(13) +#define YT921X_FDB_RESULT_INDEX_M GENMASK(11, 0) +#define YT921X_FDB_RESULT_INDEX(x) FIELD_PREP(YT921X_FDB_RESULT_INDEX_M, (x)) +#define YT921X_FDB_OUT0 0x1804b0 +#define YT921X_FDB_IO0_ADDR_HI4_M GENMASK(31, 0) +#define YT921X_FDB_OUT1 0x1804b4 +#define YT921X_FDB_IO1_EGR_INT_PRI_EN BIT(31) +#define YT921X_FDB_IO1_STATUS_M GENMASK(30, 28) +#define YT921X_FDB_IO1_STATUS(x) FIELD_PREP(YT921X_FDB_IO1_STATUS_M, (x)) +#define YT921X_FDB_IO1_STATUS_INVALID YT921X_FDB_IO1_STATUS(0) +#define YT921X_FDB_IO1_STATUS_MIN_TIME YT921X_FDB_IO1_STATUS(1) +#define YT921X_FDB_IO1_STATUS_MOVE_AGING_MAX_TIME YT921X_FDB_IO1_STATUS(3) +#define YT921X_FDB_IO1_STATUS_MAX_TIME YT921X_FDB_IO1_STATUS(5) +#define YT921X_FDB_IO1_STATUS_PENDING YT921X_FDB_IO1_STATUS(6) +#define YT921X_FDB_IO1_STATUS_STATIC YT921X_FDB_IO1_STATUS(7) +#define YT921X_FDB_IO1_FID_M GENMASK(27, 16) /* filtering ID (VID) */ +#define YT921X_FDB_IO1_FID(x) FIELD_PREP(YT921X_FDB_IO1_FID_M, (x)) +#define YT921X_FDB_IO1_ADDR_LO2_M GENMASK(15, 0) +#define YT921X_FDB_OUT2 0x1804b8 +#define YT921X_FDB_IO2_MOVE_AGING_STATUS_M GENMASK(31, 30) +#define YT921X_FDB_IO2_IGR_DROP BIT(29) +#define YT921X_FDB_IO2_EGR_PORTS_M GENMASK(28, 18) +#define YT921X_FDB_IO2_EGR_PORTS(x) FIELD_PREP(YT921X_FDB_IO2_EGR_PORTS_M, (x)) +#define YT921X_FDB_IO2_EGR_DROP BIT(17) +#define YT921X_FDB_IO2_COPY_TO_CPU BIT(16) +#define YT921X_FDB_IO2_IGR_INT_PRI_EN BIT(15) +#define YT921X_FDB_IO2_INT_PRI_M GENMASK(14, 12) +#define YT921X_FDB_IO2_INT_PRI(x) FIELD_PREP(YT921X_FDB_IO2_INT_PRI_M, (x)) +#define YT921X_FDB_IO2_NEW_VID_M GENMASK(11, 0) +#define YT921X_FDB_IO2_NEW_VID(x) FIELD_PREP(YT921X_FDB_IO2_NEW_VID_M, (x)) +#define YT921X_FILTER_UNK_UCAST 0x180508 +#define YT921X_FILTER_UNK_MCAST 0x18050c +#define YT921X_FILTER_MCAST 0x180510 +#define YT921X_FILTER_BCAST 0x180514 +#define YT921X_FILTER_PORTS_M GENMASK(10, 0) +#define YT921X_FILTER_PORTS(x) FIELD_PREP(YT921X_FILTER_PORTS_M, (x)) +#define YT921X_FILTER_PORTn(port) BIT(port) +#define YT921X_VLAN_EGR_FILTER 0x180598 +#define YT921X_VLAN_EGR_FILTER_PORTn(port) BIT(port) +#define YT921X_CPU_COPY 0x180690 +#define YT921X_CPU_COPY_FORCE_INT_PORT BIT(2) +#define YT921X_CPU_COPY_TO_INT_CPU BIT(1) +#define YT921X_CPU_COPY_TO_EXT_CPU BIT(0) +#define YT921X_ACT_UNK_UCAST 0x180734 +#define YT921X_ACT_UNK_MCAST 0x180738 +#define YT921X_ACT_UNK_MCAST_BYPASS_DROP_RMA BIT(23) +#define YT921X_ACT_UNK_MCAST_BYPASS_DROP_IGMP BIT(22) +#define YT921X_ACT_UNK_ACTn_M(port) GENMASK(2 * (port) + 1, 2 * (port)) +#define YT921X_ACT_UNK_ACTn(port, x) ((x) << (2 * (port))) +#define YT921X_ACT_UNK_ACTn_FORWARD(port) YT921X_ACT_UNK_ACTn(port, 0) /* flood */ +#define YT921X_ACT_UNK_ACTn_TRAP(port) YT921X_ACT_UNK_ACTn(port, 1) /* steer to CPU */ +#define YT921X_ACT_UNK_ACTn_DROP(port) YT921X_ACT_UNK_ACTn(port, 2) /* discard */ +/* NEVER use this action; see comments in the tag driver */ +#define YT921X_ACT_UNK_ACTn_COPY(port) YT921X_ACT_UNK_ACTn(port, 3) /* flood and copy */ +#define YT921X_FDB_HW_FLUSH 0x180958 +#define YT921X_FDB_HW_FLUSH_ON_LINKDOWN BIT(0) + +#define YT921X_VLANn_CTRL(vlan) (0x188000 + 8 * (vlan)) +#define YT921X_VLAN_CTRL_UNTAG_PORTS_M GENMASK_ULL(50, 40) +#define YT921X_VLAN_CTRL_UNTAG_PORTS(x) FIELD_PREP(YT921X_VLAN_CTRL_UNTAG_PORTS_M, (x)) +#define YT921X_VLAN_CTRL_UNTAG_PORTn(port) BIT_ULL((port) + 40) +#define YT921X_VLAN_CTRL_STP_ID_M GENMASK_ULL(39, 36) +#define YT921X_VLAN_CTRL_STP_ID(x) FIELD_PREP(YT921X_VLAN_CTRL_STP_ID_M, (x)) +#define YT921X_VLAN_CTRL_SVLAN_EN BIT_ULL(35) +#define YT921X_VLAN_CTRL_FID_M GENMASK_ULL(34, 23) +#define YT921X_VLAN_CTRL_FID(x) FIELD_PREP(YT921X_VLAN_CTRL_FID_M, (x)) +#define YT921X_VLAN_CTRL_LEARN_DIS BIT_ULL(22) +#define YT921X_VLAN_CTRL_INT_PRI_EN BIT_ULL(21) +#define YT921X_VLAN_CTRL_INT_PRI_M GENMASK_ULL(20, 18) +#define YT921X_VLAN_CTRL_PORTS_M GENMASK_ULL(17, 7) +#define YT921X_VLAN_CTRL_PORTS(x) FIELD_PREP(YT921X_VLAN_CTRL_PORTS_M, (x)) +#define YT921X_VLAN_CTRL_PORTn(port) BIT_ULL((port) + 7) +#define YT921X_VLAN_CTRL_BYPASS_1X_AC BIT_ULL(6) +#define YT921X_VLAN_CTRL_METER_EN BIT_ULL(5) +#define YT921X_VLAN_CTRL_METER_ID_M GENMASK_ULL(4, 0) + +#define YT921X_TPID_IGRn(x) (0x210000 + 4 * (x)) /* [0, 3] */ +#define YT921X_TPID_IGR_TPID_M GENMASK(15, 0) +#define YT921X_PORTn_IGR_TPID(port) (0x210010 + 4 * (port)) +#define YT921X_PORT_IGR_TPIDn_STAG_M GENMASK(7, 4) +#define YT921X_PORT_IGR_TPIDn_STAG(x) BIT((x) + 4) +#define YT921X_PORT_IGR_TPIDn_CTAG_M GENMASK(3, 0) +#define YT921X_PORT_IGR_TPIDn_CTAG(x) BIT(x) + +#define YT921X_PORTn_VLAN_CTRL(port) (0x230010 + 4 * (port)) +#define YT921X_PORT_VLAN_CTRL_SVLAN_PRI_EN BIT(31) +#define YT921X_PORT_VLAN_CTRL_CVLAN_PRI_EN BIT(30) +#define YT921X_PORT_VLAN_CTRL_SVID_M GENMASK(29, 18) +#define YT921X_PORT_VLAN_CTRL_SVID(x) FIELD_PREP(YT921X_PORT_VLAN_CTRL_SVID_M, (x)) +#define YT921X_PORT_VLAN_CTRL_CVID_M GENMASK(17, 6) +#define YT921X_PORT_VLAN_CTRL_CVID(x) FIELD_PREP(YT921X_PORT_VLAN_CTRL_CVID_M, (x)) +#define YT921X_PORT_VLAN_CTRL_SVLAN_PRI_M GENMASK(5, 3) +#define YT921X_PORT_VLAN_CTRL_CVLAN_PRI_M GENMASK(2, 0) +#define YT921X_PORTn_VLAN_CTRL1(port) (0x230080 + 4 * (port)) +#define YT921X_PORT_VLAN_CTRL1_VLAN_RANGE_EN BIT(8) +#define YT921X_PORT_VLAN_CTRL1_VLAN_RANGE_PROFILE_ID_M GENMASK(7, 4) +#define YT921X_PORT_VLAN_CTRL1_SVLAN_DROP_TAGGED BIT(3) +#define YT921X_PORT_VLAN_CTRL1_SVLAN_DROP_UNTAGGED BIT(2) +#define YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_TAGGED BIT(1) +#define YT921X_PORT_VLAN_CTRL1_CVLAN_DROP_UNTAGGED BIT(0) + +#define YT921X_MIRROR 0x300300 +#define YT921X_MIRROR_IGR_PORTS_M GENMASK(26, 16) +#define YT921X_MIRROR_IGR_PORTS(x) FIELD_PREP(YT921X_MIRROR_IGR_PORTS_M, (x)) +#define YT921X_MIRROR_IGR_PORTn(port) BIT((port) + 16) +#define YT921X_MIRROR_EGR_PORTS_M GENMASK(14, 4) +#define YT921X_MIRROR_EGR_PORTS(x) FIELD_PREP(YT921X_MIRROR_EGR_PORTS_M, (x)) +#define YT921X_MIRROR_EGR_PORTn(port) BIT((port) + 4) +#define YT921X_MIRROR_PORT_M GENMASK(3, 0) +#define YT921X_MIRROR_PORT(x) FIELD_PREP(YT921X_MIRROR_PORT_M, (x)) + +#define YT921X_EDATA_EXTMODE 0xfb +#define YT921X_EDATA_LEN 0x100 + +#define YT921X_FDB_NUM 4096 + +enum yt921x_fdb_entry_status { + YT921X_FDB_ENTRY_STATUS_INVALID = 0, + YT921X_FDB_ENTRY_STATUS_MIN_TIME = 1, + YT921X_FDB_ENTRY_STATUS_MOVE_AGING_MAX_TIME = 3, + YT921X_FDB_ENTRY_STATUS_MAX_TIME = 5, + YT921X_FDB_ENTRY_STATUS_PENDING = 6, + YT921X_FDB_ENTRY_STATUS_STATIC = 7, +}; + +#define YT921X_MSTI_NUM 16 + +#define YT9215_MAJOR 0x9002 +#define YT9218_MAJOR 0x9001 + +/* required for a hard reset */ +#define YT921X_RST_DELAY_US 10000 + +#define YT921X_FRAME_SIZE_MAX 0x2400 /* 9216 */ + +#define YT921X_TAG_LEN 8 + +/* 8 internal + 2 external + 1 mcu */ +#define YT921X_PORT_NUM 11 + +#define yt921x_port_is_internal(port) ((port) < 8) +#define yt921x_port_is_external(port) (8 <= (port) && (port) < 9) + +struct yt921x_mib { + u64 rx_broadcast; + u64 rx_pause; + u64 rx_multicast; + u64 rx_crc_errors; + + u64 rx_alignment_errors; + u64 rx_undersize_errors; + u64 rx_fragment_errors; + u64 rx_64byte; + + u64 rx_65_127byte; + u64 rx_128_255byte; + u64 rx_256_511byte; + u64 rx_512_1023byte; + + u64 rx_1024_1518byte; + u64 rx_jumbo; + u64 rx_good_bytes; + + u64 rx_bad_bytes; + u64 rx_oversize_errors; + + u64 rx_dropped; + u64 tx_broadcast; + u64 tx_pause; + u64 tx_multicast; + + u64 tx_undersize_errors; + u64 tx_64byte; + u64 tx_65_127byte; + u64 tx_128_255byte; + + u64 tx_256_511byte; + u64 tx_512_1023byte; + u64 tx_1024_1518byte; + u64 tx_jumbo; + + u64 tx_good_bytes; + u64 tx_collisions; + + u64 tx_aborted_errors; + u64 tx_multiple_collisions; + u64 tx_single_collisions; + u64 tx_good; + + u64 tx_deferred; + u64 tx_late_collisions; + u64 rx_oam; + u64 tx_oam; +}; + +struct yt921x_port { + unsigned char index; + + bool hairpin; + bool isolated; + + struct delayed_work mib_read; + struct yt921x_mib mib; + u64 rx_frames; + u64 tx_frames; +}; + +struct yt921x_reg_ops { + int (*read)(void *context, u32 reg, u32 *valp); + int (*write)(void *context, u32 reg, u32 val); +}; + +struct yt921x_priv { + struct dsa_switch ds; + + const struct yt921x_info *info; + /* cache of dsa_cpu_ports(ds) */ + u16 cpu_ports_mask; + + /* protect the access to the switch registers */ + struct mutex reg_lock; + const struct yt921x_reg_ops *reg_ops; + void *reg_ctx; + + /* mdio master bus */ + struct mii_bus *mbus_int; + struct mii_bus *mbus_ext; + + struct yt921x_port ports[YT921X_PORT_NUM]; + + u16 eee_ports_mask; +}; + +#endif |