diff options
Diffstat (limited to 'drivers/net/ethernet/8390/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/8390/Kconfig | 102 |
1 files changed, 51 insertions, 51 deletions
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index a5f91e1e8fe3..345f250781c6 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -1,27 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only # # 8390 device configuration # config NET_VENDOR_8390 - bool "National Semi-conductor 8390 devices" + bool "National Semiconductor 8390 devices" default y depends on NET_VENDOR_NATSEMI - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + help + If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all - the questions about Western Digital cards. If you say Y, you will be - asked for your specific card in the following questions. + the questions about National Semiconductor 8390 cards. If you say Y, + you will be asked for your specific card in the following questions. if NET_VENDOR_8390 config PCMCIA_AXNET tristate "Asix AX88190 PCMCIA support" - depends on PCMCIA - ---help--- + depends on PCMCIA && HAS_IOPORT + help Say Y here if you intend to attach an Asix AX88190-based PCMCIA (PC-card) Fast Ethernet card to your computer. These cards are nearly NE2000 compatible but need a separate driver due to a few @@ -31,12 +30,12 @@ config PCMCIA_AXNET called axnet_cs. If unsure, say N. config AX88796 - tristate "ASIX AX88796 NE2000 clone support" - depends on (ARM || MIPS || SUPERH) + tristate "ASIX AX88796 NE2000 clone support" if !ZORRO + depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST) select CRC32 select PHYLIB select MDIO_BITBANG - ---help--- + help AX88796 driver, using platform bus to provide chip detection and resources @@ -44,14 +43,27 @@ config AX88796_93CX6 bool "ASIX AX88796 external 93CX6 eeprom support" depends on AX88796 select EEPROM_93CX6 - ---help--- + help Select this if your platform comes with an external 93CX6 eeprom. +config XSURF100 + tristate "Amiga XSurf 100 AX88796/NE2000 clone support" + depends on ZORRO + select AX88796 + select AX88796B_PHY + help + This driver is for the Individual Computers X-Surf 100 Ethernet + card (based on the Asix AX88796 chip). If you have such a card, + say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called xsurf100. + config HYDRA tristate "Hydra support" depends on ZORRO select CRC32 - ---help--- + help If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the module @@ -61,25 +73,23 @@ config ARM_ETHERH tristate "I-cubed EtherH/ANT EtherM support" depends on ARM && ARCH_ACORN select CRC32 - ---help--- + help If you have an Acorn system with one of these network cards, you should say Y to this option if you wish to use it with Linux. config MAC8390 - bool "Macintosh NS 8390 based ethernet cards" + tristate "Macintosh NS 8390 based ethernet cards" depends on MAC select CRC32 - ---help--- + help If you want to include a driver to support Nubus or LC-PDS - Ethernet cards using an NS8390 chipset or its equivalent, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + Ethernet cards using an NS8390 chipset or its equivalent, say Y. config MCF8390 tristate "ColdFire NS8390 based Ethernet support" depends on COLDFIRE select CRC32 - ---help--- + help This driver is for Ethernet devices using an NS8390-compatible chipset on many common ColdFire CPU based boards. Many of the older Freescale dev boards use this, and some other common boards like @@ -91,13 +101,13 @@ config MCF8390 config NE2000 tristate "NE2000/NE1000 support" - depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) + depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) + select NETDEV_LEGACY_INIT if ISA select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Many Ethernet cards - without a specific driver are compatible with NE2000. + help + If you have a network (Ethernet) card of this type, say Y here. + Many Ethernet cards without a specific driver are compatible with + the NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI NE2000 and clone support" below. @@ -107,14 +117,13 @@ config NE2000 config NE2K_PCI tristate "PCI NE2000 and clones support (see help)" - depends on PCI + depends on PCI && HAS_IOPORT select CRC32 - ---help--- + help This driver is for NE2000 compatible PCI cards. It will not work with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 support" below). If you have a PCI NE2000 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + say Y here. This driver also works for the following NE2000 clone cards: RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 @@ -128,7 +137,7 @@ config APNE tristate "PCMCIA NE2000 support" depends on AMIGA_PCMCIA select CRC32 - ---help--- + help If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, say N. @@ -137,27 +146,20 @@ config APNE config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" - depends on PCMCIA + depends on PCMCIA && HAS_IOPORT select CRC32 - ---help--- + help Say Y here if you intend to attach an NE2000 compatible PCMCIA (PC-card) Ethernet or Fast Ethernet card to your computer. To compile this driver as a module, choose M here: the module will be called pcnet_cs. If unsure, say N. -config NE_H8300 - tristate "NE2000 compatible support for H8/300" - depends on H8300 - ---help--- - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - config STNIC tristate "National DP83902AV support" depends on SUPERH select CRC32 - ---help--- + help Support for cards based on the National Semiconductor DP83902AV ST-NIC Serial Network Interface Controller for Twisted Pair. This is a 10Mbit/sec Ethernet controller. Product overview and specs at @@ -168,11 +170,10 @@ config STNIC config ULTRA tristate "SMC Ultra support" depends on ISA + select NETDEV_LEGACY_INIT select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + help + If you have a network (Ethernet) card of this type, say Y here. Important: There have been many reports that, with some motherboards mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, @@ -187,11 +188,10 @@ config ULTRA config WD80x3 tristate "WD80*3 support" depends on ISA + select NETDEV_LEGACY_INIT select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + help + If you have a network (Ethernet) card of this type, say Y here. To compile this driver as a module, choose M here. The module will be called wd. @@ -200,7 +200,7 @@ config ZORRO8390 tristate "Zorro NS8390-based Ethernet support" depends on ZORRO select CRC32 - ---help--- + help This driver is for Zorro Ethernet cards using an NS8390-compatible chipset, like the Village Tronic Ariadne II and the Individual Computers X-Surf Ethernet cards. If you have such a card, say Y. |