diff options
Diffstat (limited to 'drivers/net/ethernet/amazon/ena/ena_com.h')
| -rw-r--r-- | drivers/net/ethernet/amazon/ena/ena_com.h | 270 |
1 files changed, 202 insertions, 68 deletions
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h index bc187adf54e4..64df2c48c9a6 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.h +++ b/drivers/net/ethernet/amazon/ena/ena_com.h @@ -1,33 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ /* - * Copyright 2015 Amazon.com, Inc. or its affiliates. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. + * Copyright 2015-2020 Amazon.com, Inc. or its affiliates. All rights reserved. */ #ifndef ENA_COM @@ -69,12 +42,14 @@ #define ADMIN_CQ_SIZE(depth) ((depth) * sizeof(struct ena_admin_acq_entry)) #define ADMIN_AENQ_SIZE(depth) ((depth) * sizeof(struct ena_admin_aenq_entry)) +#define ENA_CUSTOMER_METRICS_BUFFER_SIZE 512 + /*****************************************************************************/ /*****************************************************************************/ /* ENA adaptive interrupt moderation settings */ #define ENA_INTR_INITIAL_TX_INTERVAL_USECS 64 -#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 0 +#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 20 #define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1 #define ENA_HASH_KEY_SIZE 40 @@ -127,6 +102,7 @@ struct ena_com_llq_info { u16 descs_num_before_header; u16 descs_per_entry; u16 max_entries_in_tx_burst; + bool disable_meta_caching; }; struct ena_com_io_cq { @@ -135,22 +111,19 @@ struct ena_com_io_cq { /* Interrupt unmask register */ u32 __iomem *unmask_reg; - /* The completion queue head doorbell register */ - u32 __iomem *cq_head_db_reg; - /* numa configuration register (for TPH) */ u32 __iomem *numa_node_cfg_reg; /* The value to write to the above register to unmask * the interrupt of this queue */ - u32 msix_vector; + u32 msix_vector ____cacheline_aligned; enum queue_direction direction; /* holds the number of cdesc of the current packet */ u16 cur_rx_pkt_cdesc_count; - /* save the firt cdesc idx of the current packet */ + /* save the first cdesc idx of the current packet */ u16 cur_rx_pkt_cdesc_start_idx; u16 q_depth; @@ -160,7 +133,6 @@ struct ena_com_io_cq { /* Device queue index */ u16 idx; u16 head; - u16 last_head_update; u8 phase; u8 cdesc_entry_size_in_bytes; @@ -184,11 +156,12 @@ struct ena_com_io_sq { struct ena_com_io_desc_addr desc_addr; u32 __iomem *db_addr; - u8 __iomem *header_addr; enum queue_direction direction; enum ena_admin_placement_policy_type mem_queue_type; + bool disable_meta_caching; + u32 msix_vector; struct ena_com_tx_meta cached_tx_meta; struct ena_com_llq_info llq_info; @@ -230,11 +203,19 @@ struct ena_com_admin_sq { }; struct ena_com_stats_admin { - u32 aborted_cmd; - u32 submitted_cmd; - u32 completed_cmd; - u32 out_of_space; - u32 no_completion; + u64 aborted_cmd; + u64 submitted_cmd; + u64 completed_cmd; + u64 out_of_space; + u64 no_completion; +}; + +struct ena_com_stats_phc { + u64 phc_cnt; + u64 phc_exp; + u64 phc_skp; + u64 phc_err_dv; + u64 phc_err_ts; }; struct ena_com_admin_queue { @@ -251,9 +232,6 @@ struct ena_com_admin_queue { /* Indicate if the admin queue should poll for completion */ bool polling; - /* Define if fallback to polling mode should occur */ - bool auto_polling; - u16 curr_cmd_id; /* Indicate that the ena was initialized and can @@ -288,6 +266,47 @@ struct ena_com_mmio_read { spinlock_t lock; }; +/* PTP hardware clock (PHC) MMIO read data info */ +struct ena_com_phc_info { + /* Internal PHC statistics */ + struct ena_com_stats_phc stats; + + /* PHC shared memory - virtual address */ + struct ena_admin_phc_resp *virt_addr; + + /* System time of last PHC request */ + ktime_t system_time; + + /* Spin lock to ensure a single outstanding PHC read */ + spinlock_t lock; + + /* PHC doorbell address as an offset to PCIe MMIO REG BAR */ + u32 doorbell_offset; + + /* Shared memory read expire timeout (usec) + * Max time for valid PHC retrieval, passing this threshold will fail + * the get time request and block new PHC requests for block_timeout_usec + * in order to prevent floods on busy device + */ + u32 expire_timeout_usec; + + /* Shared memory read abort timeout (usec) + * PHC requests block period, blocking starts once PHC request expired + * in order to prevent floods on busy device, + * any PHC requests during block period will be skipped + */ + u32 block_timeout_usec; + + /* PHC shared memory - physical address */ + dma_addr_t phys_addr; + + /* Request id sent to the device */ + u16 req_id; + + /* True if PHC is active in the device */ + bool active; +}; + struct ena_rss { /* Indirect table */ u16 *host_rss_ind_tbl; @@ -307,6 +326,16 @@ struct ena_rss { }; +struct ena_customer_metrics { + /* in correlation with ENA_ADMIN_CUSTOMER_METRICS_SUPPORT_MASK + * and ena_admin_customer_metrics_id + */ + u64 supported_metrics; + dma_addr_t buffer_dma_addr; + void *buffer_virt_addr; + u32 buffer_len; +}; + struct ena_host_attribute { /* Debug area */ u8 *debug_area_virt_addr; @@ -327,16 +356,21 @@ struct ena_com_dev { u8 __iomem *reg_bar; void __iomem *mem_bar; void *dmadev; + struct net_device *net_device; enum ena_admin_placement_policy_type tx_mem_queue_type; u32 tx_max_header_size; u16 stats_func; /* Selected function for extended statistic dump */ u16 stats_queue; /* Selected queue for extended statistic dump */ + u32 ena_min_poll_delay_us; + struct ena_com_mmio_read mmio_read; + struct ena_com_phc_info phc; struct ena_rss rss; u32 supported_features; + u32 capabilities; u32 dma_addr_bits; struct ena_host_attribute host_attr; @@ -353,7 +387,7 @@ struct ena_com_dev { struct ena_com_llq_info llq_info; - u32 ena_min_poll_delay_us; + struct ena_customer_metrics customer_metrics; }; struct ena_com_dev_get_features_ctx { @@ -398,6 +432,40 @@ struct ena_aenq_handlers { */ int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev); +/* ena_com_phc_init - Allocate and initialize PHC feature + * @ena_dev: ENA communication layer struct + * @note: This method assumes PHC is supported by the device + * @return - 0 on success, negative value on failure + */ +int ena_com_phc_init(struct ena_com_dev *ena_dev); + +/* ena_com_phc_supported - Return if PHC feature is supported by the device + * @ena_dev: ENA communication layer struct + * @note: This method must be called after getting supported features + * @return - supported or not + */ +bool ena_com_phc_supported(struct ena_com_dev *ena_dev); + +/* ena_com_phc_config - Configure PHC feature + * @ena_dev: ENA communication layer struct + * Configure PHC feature in driver and device + * @note: This method assumes PHC is supported by the device + * @return - 0 on success, negative value on failure + */ +int ena_com_phc_config(struct ena_com_dev *ena_dev); + +/* ena_com_phc_destroy - Destroy PHC feature + * @ena_dev: ENA communication layer struct + */ +void ena_com_phc_destroy(struct ena_com_dev *ena_dev); + +/* ena_com_phc_get_timestamp - Retrieve PHC timestamp + * @ena_dev: ENA communication layer struct + * @timestamp: Retrieved PHC timestamp + * @return - 0 on success, negative value on failure + */ +int ena_com_phc_get_timestamp(struct ena_com_dev *ena_dev, u64 *timestamp); + /* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism * @ena_dev: ENA communication layer struct * @readless_supported: readless mode (enable/disable) @@ -506,17 +574,6 @@ bool ena_com_get_admin_running_state(struct ena_com_dev *ena_dev); */ void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling); -/* ena_com_set_admin_auto_polling_mode - Enable autoswitch to polling mode - * @ena_dev: ENA communication layer struct - * @polling: Enable/Disable polling mode - * - * Set the autopolling mode. - * If autopolling is on: - * In case of missing interrupt when data is available switch to polling. - */ -void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev, - bool polling); - /* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler * @ena_dev: ENA communication layer struct * @@ -533,7 +590,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev); * This method goes over the async event notification queue and calls the proper * aenq handler. */ -void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data); +void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data); /* ena_com_abort_admin_commands - Abort all the outstanding admin commands. * @ena_dev: ENA communication layer struct @@ -604,31 +661,40 @@ int ena_com_set_aenq_config(struct ena_com_dev *ena_dev, u32 groups_flag); int ena_com_get_dev_attr_feat(struct ena_com_dev *ena_dev, struct ena_com_dev_get_features_ctx *get_feat_ctx); -/* ena_com_get_dev_basic_stats - Get device basic statistics +/* ena_com_get_eni_stats - Get extended network interface statistics * @ena_dev: ENA communication layer struct * @stats: stats return value * * @return: 0 on Success and negative value otherwise. */ -int ena_com_get_dev_basic_stats(struct ena_com_dev *ena_dev, - struct ena_admin_basic_stats *stats); +int ena_com_get_eni_stats(struct ena_com_dev *ena_dev, + struct ena_admin_eni_stats *stats); -/* ena_com_set_dev_mtu - Configure the device mtu. +/* ena_com_get_ena_srd_info - Get ENA SRD network interface statistics * @ena_dev: ENA communication layer struct - * @mtu: mtu value + * @info: ena srd stats and flags * * @return: 0 on Success and negative value otherwise. */ -int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, int mtu); +int ena_com_get_ena_srd_info(struct ena_com_dev *ena_dev, + struct ena_admin_ena_srd_info *info); -/* ena_com_get_offload_settings - Retrieve the device offloads capabilities +/* ena_com_get_customer_metrics - Get customer metrics for network interface * @ena_dev: ENA communication layer struct - * @offlad: offload return value + * @buffer: buffer for returned customer metrics + * @len: size of the buffer * * @return: 0 on Success and negative value otherwise. */ -int ena_com_get_offload_settings(struct ena_com_dev *ena_dev, - struct ena_admin_feature_offload_desc *offload); +int ena_com_get_customer_metrics(struct ena_com_dev *ena_dev, char *buffer, u32 len); + +/* ena_com_set_dev_mtu - Configure the device mtu. + * @ena_dev: ENA communication layer struct + * @mtu: mtu value + * + * @return: 0 on Success and negative value otherwise. + */ +int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, u32 mtu); /* ena_com_rss_init - Init RSS * @ena_dev: ENA communication layer struct @@ -823,6 +889,13 @@ int ena_com_allocate_host_info(struct ena_com_dev *ena_dev); int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev, u32 debug_area_size); +/* ena_com_allocate_customer_metrics_buffer - Allocate customer metrics resources. + * @ena_dev: ENA communication layer struct + * + * @return: 0 on Success and negative value otherwise. + */ +int ena_com_allocate_customer_metrics_buffer(struct ena_com_dev *ena_dev); + /* ena_com_delete_debug_area - Free the debug area resources. * @ena_dev: ENA communication layer struct * @@ -837,6 +910,13 @@ void ena_com_delete_debug_area(struct ena_com_dev *ena_dev); */ void ena_com_delete_host_info(struct ena_com_dev *ena_dev); +/* ena_com_delete_customer_metrics_buffer - Free the customer metrics resources. + * @ena_dev: ENA communication layer struct + * + * Free the allocated customer metrics area. + */ +void ena_com_delete_customer_metrics_buffer(struct ena_com_dev *ena_dev); + /* ena_com_set_host_attributes - Update the device with the host * attributes (debug area and host info) base address. * @ena_dev: ENA communication layer struct @@ -946,6 +1026,26 @@ int ena_com_config_dev_mode(struct ena_com_dev *ena_dev, struct ena_admin_feature_llq_desc *llq_features, struct ena_llq_configurations *llq_default_config); +/* ena_com_io_sq_to_ena_dev - Extract ena_com_dev using contained field io_sq. + * @io_sq: IO submit queue struct + * + * @return - ena_com_dev struct extracted from io_sq + */ +static inline struct ena_com_dev *ena_com_io_sq_to_ena_dev(struct ena_com_io_sq *io_sq) +{ + return container_of(io_sq, struct ena_com_dev, io_sq_queues[io_sq->qid]); +} + +/* ena_com_io_cq_to_ena_dev - Extract ena_com_dev using contained field io_cq. + * @io_sq: IO submit queue struct + * + * @return - ena_com_dev struct extracted from io_sq + */ +static inline struct ena_com_dev *ena_com_io_cq_to_ena_dev(struct ena_com_io_cq *io_cq) +{ + return container_of(io_cq, struct ena_com_dev, io_cq_queues[io_cq->qid]); +} + static inline bool ena_com_get_adaptive_moderation_enabled(struct ena_com_dev *ena_dev) { return ena_dev->adaptive_coalescing; @@ -961,6 +1061,40 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d ena_dev->adaptive_coalescing = false; } +/* ena_com_get_cap - query whether device supports a capability. + * @ena_dev: ENA communication layer struct + * @cap_id: enum value representing the capability + * + * @return - true if capability is supported or false otherwise + */ +static inline bool ena_com_get_cap(struct ena_com_dev *ena_dev, + enum ena_admin_aq_caps_id cap_id) +{ + return !!(ena_dev->capabilities & BIT(cap_id)); +} + +/* ena_com_get_customer_metric_support - query whether device supports a given customer metric. + * @ena_dev: ENA communication layer struct + * @metric_id: enum value representing the customer metric + * + * @return - true if customer metric is supported or false otherwise + */ +static inline bool ena_com_get_customer_metric_support(struct ena_com_dev *ena_dev, + enum ena_admin_customer_metrics_id metric_id) +{ + return !!(ena_dev->customer_metrics.supported_metrics & BIT(metric_id)); +} + +/* ena_com_get_customer_metric_count - return the number of supported customer metrics. + * @ena_dev: ENA communication layer struct + * + * @return - the number of supported customer metrics + */ +static inline int ena_com_get_customer_metric_count(struct ena_com_dev *ena_dev) +{ + return hweight64(ena_dev->customer_metrics.supported_metrics); +} + /* ena_com_update_intr_reg - Prepare interrupt register * @intr_reg: interrupt register to update. * @rx_delay_interval: Rx interval in usecs |