diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/broadcom/Kconfig | 188 |
1 files changed, 163 insertions, 25 deletions
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 1d680baf43d6..666522d64775 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Broadcom device configuration # @@ -7,14 +8,14 @@ config NET_VENDOR_BROADCOM default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC - ---help--- + help If you have a network (Ethernet) chipset belonging to this class, say Y. Note that the answer to this question does not directly affect - the kernel: saying N will just case the configurator to skip all - the questions regarding AMD chipsets. If you say Y, you will be asked - for your specific chipset/driver in the following questions. + the kernel: saying N will just cause the configurator to skip all + the questions regarding Broadcom chipsets. If you say Y, you will + be asked for your specific chipset/driver in the following questions. if NET_VENDOR_BROADCOM @@ -23,10 +24,11 @@ config B44 depends on SSB_POSSIBLE && HAS_DMA select SSB select MII - ---help--- + select PHYLIB + select FIXED_PHY if BCM47XX + help If you have a network (Ethernet) controller of this type, say Y - or M and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. + or M here. To compile this driver as a module, choose M here. The module will be called b44. @@ -50,6 +52,14 @@ config B44_PCI depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT default y +config BCM4908_ENET + tristate "Broadcom BCM4908 internal mac support" + depends on ARCH_BCMBCA || COMPILE_TEST + default y if ARCH_BCMBCA + help + This driver supports Ethernet controller integrated into Broadcom + BCM4908 family SoCs. + config BCM63XX_ENET tristate "Broadcom 63xx internal mac support" depends on BCM63XX @@ -59,25 +69,39 @@ config BCM63XX_ENET This driver supports the ethernet MACs in the Broadcom 63xx MIPS chipset family (BCM63XX). +config BCMGENET + tristate "Broadcom GENET internal MAC support" + depends on HAS_IOMEM + depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835 + select PHYLIB + select FIXED_PHY + select BCM7XXX_PHY + select MDIO_BCM_UNIMAC + select DIMLIB + select BROADCOM_PHY if ARCH_BCM2835 + help + This driver supports the built-in Ethernet MACs found in the + Broadcom BCM7xxx Set Top Box family chipset. + config BNX2 - tristate "Broadcom NetXtremeII support" + tristate "QLogic bnx2 support" depends on PCI select CRC32 select FW_LOADER - ---help--- - This driver supports Broadcom NetXtremeII gigabit Ethernet cards. + help + This driver supports QLogic bnx2 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2. This is recommended. config CNIC - tristate "Broadcom CNIC support" - depends on PCI + tristate "QLogic CNIC support" + depends on PCI && (IPV6 || IPV6=n) select BNX2 select UIO - ---help--- - This driver supports offload features of Broadcom NetXtremeII - gigabit Ethernet cards. + help + This driver supports offload features of QLogic bnx2 gigabit + Ethernet cards. To compile this driver as a module, choose M here: the module will be called cnic. This is recommended. @@ -86,7 +110,7 @@ config SB1250_MAC tristate "SB1250 Gigabit Ethernet support" depends on SIBYTE_SB1xxx_SOC select PHYLIB - ---help--- + help This driver supports Gigabit Ethernet interfaces based on the Broadcom SiByte family of System-On-a-Chip parts. They include the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455 @@ -98,23 +122,31 @@ config SB1250_MAC config TIGON3 tristate "Broadcom Tigon3 support" depends on PCI + depends on PTP_1588_CLOCK_OPTIONAL + select CRC32 select PHYLIB - select HWMON - select PTP_1588_CLOCK - ---help--- + help This driver supports Broadcom Tigon3 based gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called tg3. This is recommended. +config TIGON3_HWMON + bool "Broadcom Tigon3 HWMON support" + default y + depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m) + help + Say Y if you want to expose the thermal sensor on Tigon3 devices. + config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI + depends on PTP_1588_CLOCK_OPTIONAL select FW_LOADER select ZLIB_INFLATE - select LIBCRC32C + select CRC32 select MDIO - ---help--- + help This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2x. This is recommended. @@ -123,18 +155,124 @@ config BNX2X_SRIOV bool "Broadcom 578xx and 57712 SR-IOV support" depends on BNX2X && PCI_IOV default y - ---help--- + help This configuration parameter enables Single Root Input Output Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. config BGMAC - tristate "BCMA bus GBit core support" - depends on BCMA_HOST_SOC && HAS_DMA - ---help--- + tristate + help + This enables the integrated ethernet controller support for many + Broadcom (mostly iProc) SoCs. An appropriate bus interface driver + needs to be enabled to select this. + +config BGMAC_BCMA + tristate "Broadcom iProc GBit BCMA support" + depends on BCMA && BCMA_HOST_SOC + depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST + select BGMAC + select PHYLIB + select FIXED_PHY + help This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus. They can be found on BCM47xx SoCs and provide gigabit ethernet. In case of using this driver on BCM4706 it's also requires to enable BCMA_DRIVER_GMAC_CMN to make it work. +config BGMAC_PLATFORM + tristate "Broadcom iProc GBit platform support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + select BGMAC + select PHYLIB + select FIXED_PHY + default ARCH_BCM_IPROC + help + Say Y here if you want to use the Broadcom iProc Gigabit Ethernet + controller through the generic platform interface + +config SYSTEMPORT + tristate "Broadcom SYSTEMPORT internal MAC support" + depends on HAS_IOMEM + depends on NET_DSA || !NET_DSA + select PHYLIB + select FIXED_PHY + select DIMLIB + help + This driver supports the built-in Ethernet MACs found in the + Broadcom BCM7xxx Set Top Box family chipset using an internal + Ethernet switch. + +config BNXT + tristate "Broadcom NetXtreme-C/E support" + depends on PCI + depends on PTP_1588_CLOCK_OPTIONAL + select FW_LOADER + select CRC32 + select NET_DEVLINK + select PAGE_POOL + select DIMLIB + select AUXILIARY_BUS + help + This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit + Ethernet cards. To compile this driver as a module, choose M here: + the module will be called bnxt_en. This is recommended. + +config BNXT_SRIOV + bool "Broadcom NetXtreme-C/E SR-IOV support" + depends on BNXT && PCI_IOV + default y + help + This configuration parameter enables Single Root Input Output + Virtualization support in the NetXtreme-C/E products. This + allows for virtual function acceleration in virtual environments. + +config BNXT_FLOWER_OFFLOAD + bool "TC Flower offload support for NetXtreme-C/E" + depends on BNXT + default y + help + This configuration parameter enables TC Flower packet classifier + offload for eswitch. This option enables SR-IOV switchdev eswitch + offload. + +config BNXT_DCB + bool "Data Center Bridging (DCB) Support" + default n + depends on BNXT && DCB + help + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + + If unsure, say N. + +config BNXT_HWMON + bool "Broadcom NetXtreme-C/E HWMON support" + default y + depends on BNXT && HWMON && !(BNXT=y && HWMON=m) + help + Say Y if you want to expose the thermal sensor data on NetXtreme-C/E + devices, via the hwmon sysfs interface. + +config BNGE + tristate "Broadcom Ethernet device support" + depends on PCI + select NET_DEVLINK + select PAGE_POOL + help + This driver supports Broadcom 50/100/200/400/800 gigabit Ethernet cards. + The module will be called bng_en. To compile this driver as a module, + choose M here. + +config BCMASP + tristate "Broadcom ASP 2.0 Ethernet support" + depends on ARCH_BRCMSTB || COMPILE_TEST + default ARCH_BRCMSTB + depends on OF + select PHYLIB + select MDIO_BCM_UNIMAC + help + This configuration enables the Broadcom ASP 2.0 Ethernet controller + driver which is present in Broadcom STB SoCs such as 72165. + endif # NET_VENDOR_BROADCOM |