summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x.h')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h551
1 files changed, 317 insertions, 234 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index dedbd76c033e..9580ab83d387 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1,12 +1,14 @@
-/* bnx2x.h: Broadcom Everest network driver.
+/* bnx2x.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
* Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
*/
@@ -20,14 +22,24 @@
#include <linux/types.h>
#include <linux/pci_regs.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
+#include <linux/timecounter.h>
+
/* compilation time flags */
/* define this to make the driver freeze on error to allow getting debug info
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.78.17-0"
-#define DRV_MODULE_RELDATE "2013/04/11"
+/* FIXME: Delete the DRV_MODULE_VERSION below, but please be warned
+ * that it is not an easy task because such change has all chances
+ * to break this driver due to amount of abuse of in-kernel interfaces
+ * between modules and FW.
+ *
+ * DO NOT UPDATE DRV_MODULE_VERSION below.
+ */
+#define DRV_MODULE_VERSION "1.713.36-0"
#define BNX2X_BC_VER 0x040200
#if defined(CONFIG_DCB)
@@ -70,18 +82,28 @@ enum bnx2x_int_mode {
#define BNX2X_MSG_SP 0x0100000 /* was: NETIF_MSG_INTR */
#define BNX2X_MSG_FP 0x0200000 /* was: NETIF_MSG_INTR */
#define BNX2X_MSG_IOV 0x0800000
+#define BNX2X_MSG_PTP 0x1000000
#define BNX2X_MSG_IDLE 0x2000000 /* used for idle check*/
#define BNX2X_MSG_ETHTOOL 0x4000000
#define BNX2X_MSG_DCB 0x8000000
/* regular debug print */
+#define DP_INNER(fmt, ...) \
+ pr_notice("[%s:%d(%s)]" fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__VA_ARGS__);
+
#define DP(__mask, fmt, ...) \
do { \
if (unlikely(bp->msg_enable & (__mask))) \
- pr_notice("[%s:%d(%s)]" fmt, \
- __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", \
- ##__VA_ARGS__); \
+ DP_INNER(fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define DP_AND(__mask, fmt, ...) \
+do { \
+ if (unlikely((bp->msg_enable & (__mask)) == __mask)) \
+ DP_INNER(fmt, ##__VA_ARGS__); \
} while (0)
#define DP_CONT(__mask, fmt, ...) \
@@ -150,6 +172,12 @@ do { \
#define REG_RD8(bp, offset) readb(REG_ADDR(bp, offset))
#define REG_RD16(bp, offset) readw(REG_ADDR(bp, offset))
+#define REG_WR_RELAXED(bp, offset, val) \
+ writel_relaxed((u32)val, REG_ADDR(bp, offset))
+
+#define REG_WR16_RELAXED(bp, offset, val) \
+ writew_relaxed((u16)val, REG_ADDR(bp, offset))
+
#define REG_WR(bp, offset, val) writel((u32)val, REG_ADDR(bp, offset))
#define REG_WR8(bp, offset, val) writeb((u8)val, REG_ADDR(bp, offset))
#define REG_WR16(bp, offset, val) writew((u16)val, REG_ADDR(bp, offset))
@@ -246,8 +274,37 @@ enum {
BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
};
-#define BNX2X_CNIC_START_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) *\
+/* use a value high enough to be above all the PFs, which has least significant
+ * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
+ * calculate doorbell address according to old doorbell configuration scheme
+ * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
+ * We must avoid coming up with cid 8 for iscsi since according to this method
+ * the designated UIO cid will come out 0 and it has a special handling for that
+ * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
+ */
+
+#define BNX2X_1st_NON_L2_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
(bp)->max_cos)
+/* amount of cids traversed by UIO's DPM addition to doorbell */
+#define UIO_DPM 8
+/* roundup to DPM offset */
+#define UIO_ROUNDUP(bp) (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
+ UIO_DPM))
+/* offset to nearest value which has lsb nibble matching DPM */
+#define UIO_CID_OFFSET(bp) ((UIO_ROUNDUP(bp) + UIO_DPM) % \
+ (UIO_DPM * 2))
+/* add offset to rounded-up cid to get a value which could be used with UIO */
+#define UIO_DPM_ALIGN(bp) (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
+/* but wait - avoid UIO special case for cid 0 */
+#define UIO_DPM_CID0_OFFSET(bp) ((UIO_DPM * 2) * \
+ (UIO_DPM_ALIGN(bp) == UIO_DPM))
+/* Properly DPM aligned CID dajusted to cid 0 secal case */
+#define BNX2X_CNIC_START_ETH_CID(bp) (UIO_DPM_ALIGN(bp) + \
+ (UIO_DPM_CID0_OFFSET(bp)))
+/* how many cids were wasted - need this value for cid allocation */
+#define UIO_CID_PAD(bp) (BNX2X_CNIC_START_ETH_CID(bp) - \
+ BNX2X_1st_NON_L2_ETH_CID(bp))
/* iSCSI L2 */
#define BNX2X_ISCSI_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp))
/* FCoE L2 */
@@ -308,11 +365,13 @@ struct sw_tx_bd {
u8 flags;
/* Set on the first BD descriptor when there is a split BD */
#define BNX2X_TSO_SPLIT_BD (1<<0)
+#define BNX2X_HAS_SECOND_PBD (1<<1)
};
struct sw_rx_page {
struct page *page;
DEFINE_DMA_UNMAP_ADDR(mapping);
+ unsigned int offset;
};
union db_prod {
@@ -337,9 +396,10 @@ union db_prod {
#define PAGES_PER_SGE_SHIFT 0
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
-#define SGE_PAGE_SIZE PAGE_SIZE
-#define SGE_PAGE_SHIFT PAGE_SHIFT
-#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN((typeof(PAGE_SIZE))(addr))
+#define SGE_PAGE_SHIFT 12
+#define SGE_PAGE_SIZE (1 << SGE_PAGE_SHIFT)
+#define SGE_PAGE_MASK (~(SGE_PAGE_SIZE - 1))
+#define SGE_PAGE_ALIGN(addr) (((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK)
#define SGE_PAGES (SGE_PAGE_SIZE * PAGES_PER_SGE)
#define TPA_AGG_SIZE min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \
SGE_PAGES), 0xffff)
@@ -443,7 +503,7 @@ struct bnx2x_agg_info {
u16 vlan_tag;
u16 len_on_bd;
u32 rxhash;
- bool l4_rxhash;
+ enum pkt_hash_types rxhash_type;
u16 gro_size;
u16 full_page;
};
@@ -477,29 +537,21 @@ struct bnx2x_fp_txdata {
};
enum bnx2x_tpa_mode_t {
+ TPA_MODE_DISABLED,
TPA_MODE_LRO,
TPA_MODE_GRO
};
+struct bnx2x_alloc_pool {
+ struct page *page;
+ unsigned int offset;
+};
+
struct bnx2x_fastpath {
struct bnx2x *bp; /* parent */
struct napi_struct napi;
-#ifdef CONFIG_NET_LL_RX_POLL
- unsigned int state;
-#define BNX2X_FP_STATE_IDLE 0
-#define BNX2X_FP_STATE_NAPI (1 << 0) /* NAPI owns this FP */
-#define BNX2X_FP_STATE_POLL (1 << 1) /* poll owns this FP */
-#define BNX2X_FP_STATE_NAPI_YIELD (1 << 2) /* NAPI yielded this FP */
-#define BNX2X_FP_STATE_POLL_YIELD (1 << 3) /* poll yielded this FP */
-#define BNX2X_FP_YIELD (BNX2X_FP_STATE_NAPI_YIELD | BNX2X_FP_STATE_POLL_YIELD)
-#define BNX2X_FP_LOCKED (BNX2X_FP_STATE_NAPI | BNX2X_FP_STATE_POLL)
-#define BNX2X_FP_USER_PEND (BNX2X_FP_STATE_POLL | BNX2X_FP_STATE_POLL_YIELD)
- /* protect state */
- spinlock_t lock;
-#endif /* CONFIG_NET_LL_RX_POLL */
-
union host_hc_status_block status_blk;
/* chip independent shortcuts into sb structure */
__le16 *sb_index_values;
@@ -550,12 +602,9 @@ struct bnx2x_fastpath {
/* The last maximal completed SGE */
u16 last_max_sge;
__le16 *rx_cons_sb;
- unsigned long rx_pkt,
- rx_calls;
/* TPA related */
struct bnx2x_agg_info *tpa_info;
- u8 disable_tpa;
#ifdef BNX2X_STOP_ON_ERROR
u64 tpa_queue_used;
#endif
@@ -565,6 +614,8 @@ struct bnx2x_fastpath {
4 (for the digits and to make it DWORD aligned) */
#define FP_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8)
char name[FP_NAME_SIZE];
+
+ struct bnx2x_alloc_pool page_pool;
};
#define bnx2x_fp(bp, nr, var) ((bp)->fp[(nr)].var)
@@ -572,116 +623,6 @@ struct bnx2x_fastpath {
#define bnx2x_fp_stats(bp, fp) (&((bp)->fp_stats[(fp)->index]))
#define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats))
-#ifdef CONFIG_NET_LL_RX_POLL
-static inline void bnx2x_fp_init_lock(struct bnx2x_fastpath *fp)
-{
- spin_lock_init(&fp->lock);
- fp->state = BNX2X_FP_STATE_IDLE;
-}
-
-/* called from the device poll routine to get ownership of a FP */
-static inline bool bnx2x_fp_lock_napi(struct bnx2x_fastpath *fp)
-{
- bool rc = true;
-
- spin_lock(&fp->lock);
- if (fp->state & BNX2X_FP_LOCKED) {
- WARN_ON(fp->state & BNX2X_FP_STATE_NAPI);
- fp->state |= BNX2X_FP_STATE_NAPI_YIELD;
- rc = false;
- } else {
- /* we don't care if someone yielded */
- fp->state = BNX2X_FP_STATE_NAPI;
- }
- spin_unlock(&fp->lock);
- return rc;
-}
-
-/* returns true is someone tried to get the FP while napi had it */
-static inline bool bnx2x_fp_unlock_napi(struct bnx2x_fastpath *fp)
-{
- bool rc = false;
-
- spin_lock(&fp->lock);
- WARN_ON(fp->state &
- (BNX2X_FP_STATE_POLL | BNX2X_FP_STATE_NAPI_YIELD));
-
- if (fp->state & BNX2X_FP_STATE_POLL_YIELD)
- rc = true;
- fp->state = BNX2X_FP_STATE_IDLE;
- spin_unlock(&fp->lock);
- return rc;
-}
-
-/* called from bnx2x_low_latency_poll() */
-static inline bool bnx2x_fp_lock_poll(struct bnx2x_fastpath *fp)
-{
- bool rc = true;
-
- spin_lock_bh(&fp->lock);
- if ((fp->state & BNX2X_FP_LOCKED)) {
- fp->state |= BNX2X_FP_STATE_POLL_YIELD;
- rc = false;
- } else {
- /* preserve yield marks */
- fp->state |= BNX2X_FP_STATE_POLL;
- }
- spin_unlock_bh(&fp->lock);
- return rc;
-}
-
-/* returns true if someone tried to get the FP while it was locked */
-static inline bool bnx2x_fp_unlock_poll(struct bnx2x_fastpath *fp)
-{
- bool rc = false;
-
- spin_lock_bh(&fp->lock);
- WARN_ON(fp->state & BNX2X_FP_STATE_NAPI);
-
- if (fp->state & BNX2X_FP_STATE_POLL_YIELD)
- rc = true;
- fp->state = BNX2X_FP_STATE_IDLE;
- spin_unlock_bh(&fp->lock);
- return rc;
-}
-
-/* true if a socket is polling, even if it did not get the lock */
-static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp)
-{
- WARN_ON(!(fp->state & BNX2X_FP_LOCKED));
- return fp->state & BNX2X_FP_USER_PEND;
-}
-#else
-static inline void bnx2x_fp_init_lock(struct bnx2x_fastpath *fp)
-{
-}
-
-static inline bool bnx2x_fp_lock_napi(struct bnx2x_fastpath *fp)
-{
- return true;
-}
-
-static inline bool bnx2x_fp_unlock_napi(struct bnx2x_fastpath *fp)
-{
- return false;
-}
-
-static inline bool bnx2x_fp_lock_poll(struct bnx2x_fastpath *fp)
-{
- return false;
-}
-
-static inline bool bnx2x_fp_unlock_poll(struct bnx2x_fastpath *fp)
-{
- return false;
-}
-
-static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp)
-{
- return false;
-}
-#endif /* CONFIG_NET_LL_RX_POLL */
-
/* Use 2500 as a mini-jumbo MTU for FCoE */
#define BNX2X_FCOE_MINI_JUMBO_MTU 2500
@@ -825,16 +766,12 @@ static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp)
#define BD_UNMAP_LEN(bd) (le16_to_cpu((bd)->nbytes))
#define BNX2X_DB_MIN_SHIFT 3 /* 8 bytes */
-#define BNX2X_DB_SHIFT 7 /* 128 bytes*/
+#define BNX2X_DB_SHIFT 3 /* 8 bytes*/
#if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT)
#error "Min DB doorbell stride is 8"
#endif
-#define DPM_TRIGER_TYPE 0x40
-#define DOORBELL(bp, cid, val) \
- do { \
- writel((u32)(val), bp->doorbells + (bp->db_size * (cid)) + \
- DPM_TRIGER_TYPE); \
- } while (0)
+#define DOORBELL_RELAXED(bp, cid, val) \
+ writel_relaxed((u32)(val), (bp)->doorbells + ((bp)->db_size * (cid)))
/* TX CSUM helpers */
#define SKB_CS_OFF(skb) (offsetof(struct tcphdr, check) - \
@@ -1072,12 +1009,8 @@ struct bnx2x_port {
u32 link_config[LINK_CONFIG_SIZE];
u32 supported[LINK_CONFIG_SIZE];
-/* link settings - missing defines */
-#define SUPPORTED_2500baseX_Full (1 << 15)
u32 advertising[LINK_CONFIG_SIZE];
-/* link settings - missing defines */
-#define ADVERTISED_2500baseX_Full (1 << 15)
u32 phy_addr;
@@ -1095,18 +1028,28 @@ struct bnx2x_port {
(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
/* slow path */
-
-/* slow path work-queue */
-extern struct workqueue_struct *bnx2x_wq;
-
#define BNX2X_MAX_NUM_OF_VFS 64
-#define BNX2X_VF_CID_WND 0
+#define BNX2X_VF_CID_WND 4 /* log num of queues per VF. HW config. */
#define BNX2X_CIDS_PER_VF (1 << BNX2X_VF_CID_WND)
-#define BNX2X_CLIENTS_PER_VF 1
-#define BNX2X_FIRST_VF_CID 256
+
+/* We need to reserve doorbell addresses for all VF and queue combinations */
#define BNX2X_VF_CIDS (BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF)
+
+/* The doorbell is configured to have the same number of CIDs for PFs and for
+ * VFs. For this reason the PF CID zone is as large as the VF zone.
+ */
+#define BNX2X_FIRST_VF_CID BNX2X_VF_CIDS
+#define BNX2X_MAX_NUM_VF_QUEUES 64
#define BNX2X_VF_ID_INVALID 0xFF
+/* the number of VF CIDS multiplied by the amount of bytes reserved for each
+ * cid must not exceed the size of the VF doorbell
+ */
+#define BNX2X_VF_BAR_SIZE 512
+#if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT))
+#error "VF doorbell bar size is 512"
+#endif
+
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
@@ -1156,8 +1099,9 @@ union cdu_context {
/* TM (timers) host DB constants */
#define TM_ILT_PAGE_SZ_HW 0
#define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
-/* #define TM_CONN_NUM (CNIC_STARTING_CID+CNIC_ISCSI_CXT_MAX) */
-#define TM_CONN_NUM 1024
+#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \
+ BNX2X_VF_CIDS + \
+ CNIC_ISCSI_CID_MAX)
#define TM_ILT_SZ (8 * TM_CONN_NUM)
#define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)
@@ -1180,6 +1124,10 @@ struct bnx2x_slowpath {
} mac_rdata;
union {
+ struct eth_classify_rules_ramrod_data e2;
+ } vlan_rdata;
+
+ union {
struct tstorm_eth_mac_filter_config e1x;
struct eth_filter_rules_ramrod_data e2;
} rx_mode_rdata;
@@ -1195,6 +1143,7 @@ struct bnx2x_slowpath {
union {
struct client_init_ramrod_data init_data;
struct client_update_ramrod_data update_data;
+ struct tpa_update_ramrod_data tpa_data;
} q_rdata;
union {
@@ -1208,7 +1157,10 @@ struct bnx2x_slowpath {
* Therefore, if they would have been defined in the same union,
* data can get corrupted.
*/
- struct afex_vif_list_ramrod_data func_afex_rdata;
+ union {
+ struct afex_vif_list_ramrod_data viflist_data;
+ struct function_update_data func_update;
+ } func_afex_rdata;
/* used by dmae command executer */
struct dmae_command dmae[MAX_DMAE_C];
@@ -1310,7 +1262,7 @@ enum {
struct bnx2x_fw_stats_req {
struct stats_query_header hdr;
- struct stats_query_entry query[FP_SB_MAX_E1x+
+ struct stats_query_entry query[FP_SB_MAX_E2 +
BNX2X_FIRST_QUEUE_QUERY_IDX];
};
@@ -1319,11 +1271,11 @@ struct bnx2x_fw_stats_data {
struct per_port_stats port;
struct per_pf_stats pf;
struct fcoe_statistics_params fcoe;
- struct per_queue_stats queue_stats[1];
+ struct per_queue_stats queue_stats[];
};
/* Public slow path states */
-enum {
+enum sp_rtnl_flag {
BNX2X_SP_RTNL_SETUP_TC,
BNX2X_SP_RTNL_TX_TIMEOUT,
BNX2X_SP_RTNL_FAN_FAILURE,
@@ -1331,8 +1283,16 @@ enum {
BNX2X_SP_RTNL_ENABLE_SRIOV,
BNX2X_SP_RTNL_VFPF_MCAST,
BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
- BNX2X_SP_RTNL_VFPF_STORM_RX_MODE,
+ BNX2X_SP_RTNL_RX_MODE,
BNX2X_SP_RTNL_HYPERVISOR_VLAN,
+ BNX2X_SP_RTNL_TX_STOP,
+ BNX2X_SP_RTNL_GET_DRV_VERSION,
+ BNX2X_SP_RTNL_UPDATE_SVID,
+};
+
+enum bnx2x_iov_flag {
+ BNX2X_IOV_HANDLE_VF_MSG,
+ BNX2X_IOV_HANDLE_FLR,
};
struct bnx2x_prev_path_list {
@@ -1350,6 +1310,9 @@ struct bnx2x_sp_objs {
/* Queue State object */
struct bnx2x_queue_sp_obj q_obj;
+
+ /* VLANs object */
+ struct bnx2x_vlan_mac_obj vlan_obj;
};
struct bnx2x_fp_stats {
@@ -1360,6 +1323,25 @@ struct bnx2x_fp_stats {
struct bnx2x_eth_q_stats_old eth_q_stats_old;
};
+enum {
+ SUB_MF_MODE_UNKNOWN = 0,
+ SUB_MF_MODE_UFP,
+ SUB_MF_MODE_NPAR1_DOT_5,
+ SUB_MF_MODE_BD,
+};
+
+struct bnx2x_vlan_entry {
+ struct list_head link;
+ u16 vid;
+ bool hw;
+};
+
+enum bnx2x_udp_port_type {
+ BNX2X_UDP_PORT_VXLAN,
+ BNX2X_UDP_PORT_GENEVE,
+ BNX2X_UDP_PORT_MAX,
+};
+
struct bnx2x {
/* Fields used in the tx and intr/napi performance paths
* are grouped together in the beginning of the structure
@@ -1400,6 +1382,7 @@ struct bnx2x {
union pf_vf_bulletin *pf2vf_bulletin;
dma_addr_t pf2vf_bulletin_mapping;
+ union pf_vf_bulletin shadow_bulletin;
struct pf_vf_bulletin_content old_bulletin;
u16 requested_nr_virtfn;
@@ -1418,15 +1401,17 @@ struct bnx2x {
int tx_ring_size;
/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
-#define ETH_OVREHEAD (ETH_HLEN + 8 + 8)
-#define ETH_MIN_PACKET_SIZE 60
-#define ETH_MAX_PACKET_SIZE 1500
+#define ETH_OVERHEAD (ETH_HLEN + 8 + 8)
+#define ETH_MIN_PACKET_SIZE (ETH_ZLEN - ETH_HLEN)
+#define ETH_MAX_PACKET_SIZE ETH_DATA_LEN
#define ETH_MAX_JUMBO_PACKET_SIZE 9600
/* TCP with Timestamp Option (32) + IPv6 (40) */
#define ETH_MAX_TPA_HEADER_SIZE 72
- /* Max supported alignment is 256 (8 shift) */
-#define BNX2X_RX_ALIGN_SHIFT min(8, L1_CACHE_SHIFT)
+ /* Max supported alignment is 256 (8 shift)
+ * minimal alignment shift 6 is optimal for 57xxx HW performance
+ */
+#define BNX2X_RX_ALIGN_SHIFT max(6, min(8, L1_CACHE_SHIFT))
/* FW uses 2 Cache lines Alignment for start packet and size
*
@@ -1484,24 +1469,25 @@ struct bnx2x {
#define PCI_32BIT_FLAG (1 << 1)
#define ONE_PORT_FLAG (1 << 2)
#define NO_WOL_FLAG (1 << 3)
-#define USING_DAC_FLAG (1 << 4)
#define USING_MSIX_FLAG (1 << 5)
#define USING_MSI_FLAG (1 << 6)
#define DISABLE_MSI_FLAG (1 << 7)
-#define TPA_ENABLE_FLAG (1 << 8)
#define NO_MCP_FLAG (1 << 9)
-#define GRO_ENABLE_FLAG (1 << 10)
#define MF_FUNC_DIS (1 << 11)
#define OWN_CNIC_IRQ (1 << 12)
#define NO_ISCSI_OOO_FLAG (1 << 13)
#define NO_ISCSI_FLAG (1 << 14)
#define NO_FCOE_FLAG (1 << 15)
#define BC_SUPPORTS_PFC_STATS (1 << 17)
+#define TX_SWITCHING (1 << 18)
#define BC_SUPPORTS_FCOE_FEATURES (1 << 19)
#define USING_SINGLE_MSIX_FLAG (1 << 20)
#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21)
#define IS_VF_FLAG (1 << 22)
-#define INTERRUPTS_ENABLED_FLAG (1 << 23)
+#define BC_SUPPORTS_RMMOD_CMD (1 << 23)
+#define HAS_PHYS_PORT_ID (1 << 24)
+#define PTP_SUPPORTED (1 << 26)
+#define TX_TIMESTAMPING_EN (1 << 27)
#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG)
@@ -1522,15 +1508,18 @@ struct bnx2x {
bool cnic_loaded;
struct cnic_eth_dev *(*cnic_probe)(struct net_device *);
+ bool nic_stopped;
+
/* Flag that indicates that we can start looking for FCoE L2 queue
* completions in the default status block.
*/
bool fcoe_init;
- int pm_cap;
int mrrs;
struct delayed_work sp_task;
+ struct delayed_work iov_task;
+
atomic_t interrupt_occurred;
struct delayed_work sp_rtnl_task;
@@ -1546,6 +1535,7 @@ struct bnx2x {
struct link_vars link_vars;
u32 link_cnt;
struct bnx2x_link_report_data last_reported_link;
+ bool force_link_down;
struct mdio_if_info mdio;
@@ -1563,6 +1553,11 @@ struct bnx2x {
#define IS_MF_SI(bp) (bp->mf_mode == MULTI_FUNCTION_SI)
#define IS_MF_SD(bp) (bp->mf_mode == MULTI_FUNCTION_SD)
#define IS_MF_AFEX(bp) (bp->mf_mode == MULTI_FUNCTION_AFEX)
+ u8 mf_sub_mode;
+#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_UFP)
+#define IS_MF_BD(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_BD)
u8 wol;
@@ -1578,7 +1573,7 @@ struct bnx2x {
u16 rx_ticks_int;
u16 rx_ticks;
/* Maximal coalescing timeout in us */
-#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
+#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR)
u32 lin_cnt;
@@ -1594,13 +1589,9 @@ struct bnx2x {
#define BNX2X_STATE_ERROR 0xf000
#define BNX2X_MAX_PRIORITY 8
-#define BNX2X_MAX_ENTRIES_PER_PRI 16
-#define BNX2X_MAX_COS 3
-#define BNX2X_MAX_TX_COS 2
int num_queues;
uint num_ethernet_queues;
uint num_cnic_queues;
- int num_napi_queues;
int disable_tpa;
u32 rx_mode;
@@ -1621,6 +1612,10 @@ struct bnx2x {
struct bnx2x_slowpath *slowpath;
dma_addr_t slowpath_mapping;
+ /* Mechanism protecting the drv_info_to_mcp */
+ struct mutex drv_info_mutex;
+ bool drv_info_mng_owner;
+
/* Total number of FW statistics requests */
u8 fw_stats_num;
@@ -1647,10 +1642,10 @@ struct bnx2x {
dma_addr_t fw_stats_data_mapping;
int fw_stats_data_sz;
- /* For max 196 cids (64*3 + non-eth), 32KB ILT page size and 1KB
+ /* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB
* context size we need 8 ILT entries.
*/
-#define ILT_MAX_L2_LINES 8
+#define ILT_MAX_L2_LINES 32
struct hw_context context[ILT_MAX_L2_LINES];
struct bnx2x_ilt *ilt;
@@ -1666,10 +1661,11 @@ struct bnx2x {
* Maximum CID count that might be required by the bnx2x:
* Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
*/
+
#define BNX2X_L2_CID_COUNT(bp) (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
- + 2 * CNIC_SUPPORT(bp))
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define BNX2X_L2_MAX_CID(bp) (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
- + 2 * CNIC_SUPPORT(bp))
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define L2_ILT_LINES(bp) (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
ILT_PAGE_CIDS))
@@ -1709,7 +1705,7 @@ struct bnx2x {
int stats_state;
/* used for synchronization of concurrent threads statistics handling */
- spinlock_t stats_lock;
+ struct semaphore stats_lock;
/* used by dmae command loader */
struct dmae_command stats_dmae;
@@ -1786,8 +1782,6 @@ struct bnx2x {
int dcb_version;
/* CAM credit pools */
-
- /* used only in sriov */
struct bnx2x_credit_pool_obj vlans_pool;
struct bnx2x_credit_pool_obj macs_pool;
@@ -1809,6 +1803,9 @@ struct bnx2x {
/* operation indication for the sp_rtnl task */
unsigned long sp_rtnl_state;
+ /* Indication of the IOV tasks */
+ unsigned long iov_task_state;
+
/* DCBX Negotiation results */
struct dcbx_features dcbx_local_feat;
u32 dcbx_error;
@@ -1830,6 +1827,38 @@ struct bnx2x {
int fp_array_size;
u32 dump_preset_idx;
+
+ u8 phys_port_id[ETH_ALEN];
+
+ /* PTP related context */
+ struct ptp_clock *ptp_clock;
+ struct ptp_clock_info ptp_clock_info;
+ struct work_struct ptp_task;
+ struct cyclecounter cyclecounter;
+ struct timecounter timecounter;
+ bool timecounter_init_done;
+ struct sk_buff *ptp_tx_skb;
+ unsigned long ptp_tx_start;
+ bool hwtstamp_ioctl_called;
+ u16 tx_type;
+ u16 rx_filter;
+
+ struct bnx2x_link_report_data vf_link_vars;
+ struct list_head vlan_reg;
+ u16 vlan_cnt;
+ u16 vlan_credit;
+ bool accept_any_vlan;
+
+ /* Vxlan/Geneve related information */
+ u16 udp_tunnel_ports[BNX2X_UDP_PORT_MAX];
+
+#define FW_CAP_INVALIDATE_VF_FP_HSI BIT(0)
+ u32 fw_cap;
+
+ u32 fw_major;
+ u32 fw_minor;
+ u32 fw_rev;
+ u32 fw_eng;
};
/* Tx queues may be less or equal to Rx queues */
@@ -1857,23 +1886,14 @@ extern int num_queues;
#define RSS_IPV6_TCP_CAP_MASK \
TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY
-/* func init flags */
-#define FUNC_FLG_RSS 0x0001
-#define FUNC_FLG_STATS 0x0002
-/* removed FUNC_FLG_UNMATCHED 0x0004 */
-#define FUNC_FLG_TPA 0x0008
-#define FUNC_FLG_SPQ 0x0010
-#define FUNC_FLG_LEADING 0x0020 /* PF only */
-
struct bnx2x_func_init_params {
/* dma */
- dma_addr_t fw_stat_map; /* valid iff FUNC_FLG_STATS */
- dma_addr_t spq_map; /* valid iff FUNC_FLG_SPQ */
+ bool spq_active;
+ dma_addr_t spq_map;
+ u16 spq_prod;
- u16 func_flgs;
u16 func_id; /* abs fid */
u16 pf_id;
- u16 spq_prod; /* valid iff FUNC_FLG_SPQ */
};
#define for_each_cnic_queue(bp, var) \
@@ -1962,6 +1982,9 @@ struct bnx2x_func_init_params {
#define skip_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
+/*self test*/
+int bnx2x_idle_chk(struct bnx2x *bp);
+
/**
* bnx2x_set_mac_one - configure a single MAC address
*
@@ -1980,9 +2003,14 @@ struct bnx2x_func_init_params {
* operation has been successfully scheduled and a negative - if a requested
* operations has failed.
*/
-int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
+int bnx2x_set_mac_one(struct bnx2x *bp, const u8 *mac,
struct bnx2x_vlan_mac_obj *obj, bool set,
int mac_type, unsigned long *ramrod_flags);
+
+int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
+ struct bnx2x_vlan_mac_obj *obj, bool set,
+ unsigned long *ramrod_flags);
+
/**
* bnx2x_del_all_macs - delete all MACs configured for the specific MAC object
*
@@ -2005,7 +2033,6 @@ int bnx2x_del_all_macs(struct bnx2x *bp,
void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p);
void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
u8 vf_valid, int fw_sb_id, int igu_sb_id);
-u32 bnx2x_get_pretend_reg(struct bnx2x *bp);
int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode);
@@ -2026,7 +2053,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
u8 src_type, u8 dst_type);
-int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae);
+int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+ u32 *comp);
/* FLR related routines */
u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
@@ -2064,9 +2092,8 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
bool is_pf);
-#define BNX2X_ILT_ZALLOC(x, y, size) \
- x = dma_alloc_coherent(&bp->pdev->dev, size, y, \
- GFP_KERNEL | __GFP_ZERO)
+#define BNX2X_ILT_ZALLOC(x, y, size) \
+ x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL)
#define BNX2X_ILT_FREE(x, y, size) \
do { \
@@ -2177,6 +2204,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
E1HVN_MAX)
+/* Following is the DMAE channel number allocation for the clients.
+ * MFW: OCBB/OCSD implementations use DMAE channels 14/15 respectively.
+ * Driver: 0-3 and 8-11 (for PF dmae operations)
+ * 4 and 12 (for stats requests)
+ */
+#define BNX2X_FW_DMAE_C 13 /* Channel for FW DMAE operations */
+
/* PCIE link and speed */
#define PCICFG_LINK_WIDTH 0x1f00000
#define PCICFG_LINK_WIDTH_SHIFT 20
@@ -2186,7 +2220,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define BNX2X_NUM_TESTS_SF 7
#define BNX2X_NUM_TESTS_MF 3
#define BNX2X_NUM_TESTS(bp) (IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \
- BNX2X_NUM_TESTS_SF)
+ IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF)
#define BNX2X_PHY_LOOPBACK 0
#define BNX2X_MAC_LOOPBACK 1
@@ -2243,7 +2277,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define ATTN_HARD_WIRED_MASK 0xff00
#define ATTENTION_ID 4
-#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_SD(bp) || \
+#define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \
IS_MF_FCOE_AFEX(bp))
/* stuff added to make the code fit 80Col */
@@ -2268,7 +2302,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \
GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC))
-#define HW_INTERRUT_ASSERT_SET_0 \
+#define HW_INTERRUPT_ASSERT_SET_0 \
(AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \
@@ -2281,7 +2315,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
-#define HW_INTERRUT_ASSERT_SET_1 \
+#define HW_INTERRUPT_ASSERT_SET_1 \
(AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \
@@ -2309,7 +2343,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
-#define HW_INTERRUT_ASSERT_SET_2 \
+#define HW_INTERRUPT_ASSERT_SET_2 \
(AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \
@@ -2324,10 +2358,13 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)
-#define HW_PRTY_ASSERT_SET_3 (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
+#define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \
+ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
+
+#define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
#define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)
@@ -2379,16 +2416,17 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define ETH_MAX_RX_CLIENTS_E2 ETH_MAX_RX_CLIENTS_E1H
#endif
-#define BNX2X_VPD_LEN 128
#define VENDOR_ID_LEN 4
#define VF_ACQUIRE_THRESH 3
#define VF_ACQUIRE_MAC_FILTERS 1
#define VF_ACQUIRE_MC_FILTERS 10
+#define VF_ACQUIRE_VLAN_FILTERS 2 /* VLAN0 + 'real' VLAN */
#define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \
(!((me_reg) & ME_REG_VF_ERR)))
-int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code);
+int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);
+
/* Congestion management fairness mode */
#define CMNG_FNS_NONE 0
#define CMNG_FNS_MINMAX 1
@@ -2397,13 +2435,6 @@ int bnx2x_nic_load_analyze_req(struct bnx2x *bp, u32 load_code);
#define HC_SEG_ACCESS_ATTN 4
#define HC_SEG_ACCESS_NORM 0 /*Driver decision 0-1*/
-static const u32 dmae_reg_go_c[] = {
- DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
- DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
- DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
- DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
-};
-
void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
void bnx2x_notify_link_changed(struct bnx2x *bp);
@@ -2418,14 +2449,48 @@ void bnx2x_notify_link_changed(struct bnx2x *bp);
#define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp))
#define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))
+#define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp))
+
+#define IS_MF_ISCSI_ONLY(bp) (IS_MF_ISCSI_SD(bp) || IS_MF_ISCSI_SI(bp))
+
+#define BNX2X_MF_EXT_PROTOCOL_MASK \
+ (MACP_FUNC_CFG_FLAGS_ETHERNET | \
+ MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD | \
+ MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+
+#define BNX2X_MF_EXT_PROT(bp) ((bp)->mf_ext_config & \
+ BNX2X_MF_EXT_PROTOCOL_MASK)
+
+#define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp) \
+ (BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+
+#define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp) \
+ (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
-#define BNX2X_MF_EXT_PROTOCOL_FCOE(bp) ((bp)->mf_ext_config & \
- MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+#define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) \
+ (BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD)
-#define IS_MF_FCOE_AFEX(bp) (IS_MF_AFEX(bp) && BNX2X_MF_EXT_PROTOCOL_FCOE(bp))
-#define IS_MF_STORAGE_SD(bp) (IS_MF_SD(bp) && \
- (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \
- BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
+#define IS_MF_FCOE_AFEX(bp) \
+ (IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))
+
+#define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SD(bp) && \
+ (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) || \
+ BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
+
+#define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SI(bp) && \
+ (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) || \
+ BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)))
+
+#define IS_MF_STORAGE_PERSONALITY_ONLY(bp) \
+ (IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) || \
+ IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp))
+
+/* Determines whether BW configuration arrives in 100Mb units or in
+ * percentages from actual physical link speed.
+ */
+#define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp))
#define SET_FLAG(value, mask, flag) \
do {\
@@ -2446,9 +2511,27 @@ enum {
#define NUM_MACS 8
-enum bnx2x_pci_bus_speed {
- BNX2X_PCI_LINK_SPEED_2500 = 2500,
- BNX2X_PCI_LINK_SPEED_5000 = 5000,
- BNX2X_PCI_LINK_SPEED_8000 = 8000
-};
+void bnx2x_set_local_cmng(struct bnx2x *bp);
+
+void bnx2x_update_mng_version(struct bnx2x *bp);
+
+void bnx2x_update_mfw_dump(struct bnx2x *bp);
+
+#define MCPR_SCRATCH_BASE(bp) \
+ (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+
+#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
+
+void bnx2x_init_ptp(struct bnx2x *bp);
+int bnx2x_configure_ptp_filters(struct bnx2x *bp);
+void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb);
+void bnx2x_register_phc(struct bnx2x *bp);
+
+#define BNX2X_MAX_PHC_DRIFT 31000000
+#define BNX2X_PTP_TX_TIMEOUT
+
+/* Re-configure all previously configured vlan filters.
+ * Meant for implicit re-load flows.
+ */
+int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
#endif /* bnx2x.h */