diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/80003es2lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/80003es2lan.c | 81 |
1 files changed, 37 insertions, 44 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index cd391376036c..4eb1ceaf865a 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -1,23 +1,5 @@ -/* Intel PRO/1000 Linux driver - * Copyright(c) 1999 - 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Contact Information: - * Linux NICS <linux.nics@intel.com> - * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - */ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ /* 80003ES2LAN Gigabit Ethernet Controller (Copper) * 80003ES2LAN Gigabit Ethernet Controller (Serdes) @@ -110,8 +92,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) nvm->type = e1000_nvm_eeprom_spi; - size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); + size = (u16)FIELD_GET(E1000_EECD_SIZE_EX_MASK, eecd); /* Added to a constant, "size" becomes the left-shift value * for setting word_size. @@ -698,7 +679,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ew32(TCTL, E1000_TCTL_PSP); e1e_flush(); - usleep_range(10000, 20000); + usleep_range(10000, 11000); ctrl = er32(CTRL); @@ -714,11 +695,16 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ret_val = e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, &kum_reg_data); - if (ret_val) - return ret_val; - kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE; - e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - kum_reg_data); + if (!ret_val) { + kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE; + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_INBAND_PARAM, + kum_reg_data); + if (ret_val) + e_dbg("Error disabling far-end loopback\n"); + } else { + e_dbg("Error disabling far-end loopback\n"); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) @@ -772,11 +758,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) return ret_val; /* Disable IBIST slave mode (far-end loopback) */ - e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - &kum_reg_data); - kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE; - e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, - kum_reg_data); + ret_val = + e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM, + &kum_reg_data); + if (!ret_val) { + kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE; + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_INBAND_PARAM, + kum_reg_data); + if (ret_val) + e_dbg("Error disabling far-end loopback\n"); + } else { + e_dbg("Error disabling far-end loopback\n"); + } /* Set the transmit descriptor write-back policy */ reg_data = er32(TXDCTL(0)); @@ -1040,17 +1034,18 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) * iteration and increase the max iterations when * polling the phy; this fixes erroneous timeouts at 10Mbps. */ - ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4), - 0xFFFF); + /* these next three accesses were always meant to use page 0x34 using + * GG82563_REG(0x34, N) but never did, so we've just corrected the call + * to not drop bits + */ + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, 4, 0xFFFF); if (ret_val) return ret_val; - ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9), - ®_data); + ret_val = e1000_read_kmrn_reg_80003es2lan(hw, 9, ®_data); if (ret_val) return ret_val; reg_data |= 0x3F; - ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9), - reg_data); + ret_val = e1000_write_kmrn_reg_80003es2lan(hw, 9, reg_data); if (ret_val) return ret_val; ret_val = @@ -1077,7 +1072,6 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) /** * e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up * @hw: pointer to the HW structure - * @duplex: current duplex setting * * Configure the KMRN interface by applying last minute quirks for * 10/100 operation. @@ -1215,8 +1209,8 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, if (ret_val) return ret_val; - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | + E1000_KMRNCTRLSTA_REN; ew32(KMRNCTRLSTA, kmrnctrlsta); e1e_flush(); @@ -1250,8 +1244,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, if (ret_val) return ret_val; - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | data; + kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); e1e_flush(); |