diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/e1000.h')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/e1000.h | 36 |
1 files changed, 32 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 5b2143f4b1f8..aa08f397988e 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -21,6 +21,7 @@ #include <linux/ptp_classify.h> #include <linux/mii.h> #include <linux/mdio.h> +#include <linux/mutex.h> #include <linux/pm_qos.h> #include "hw.h" @@ -63,7 +64,7 @@ struct e1000_info; #define AUTO_ALL_MODES 0 #define E1000_EEPROM_APME 0x0400 -#define E1000_MNG_VLAN_NONE (-1) +#define E1000_MNG_VLAN_NONE 0xFFFF #define DEFAULT_JUMBO 9234 @@ -113,7 +114,10 @@ enum e1000_boards { board_pch2lan, board_pch_lpt, board_pch_spt, - board_pch_cnp + board_pch_cnp, + board_pch_tgp, + board_pch_adp, + board_pch_mtp }; struct e1000_ps_page { @@ -315,7 +319,7 @@ struct e1000_adapter { u16 tx_ring_count; u16 rx_ring_count; - struct hwtstamp_config hwtstamp_config; + struct kernel_hwtstamp_config hwtstamp_config; struct delayed_work systim_overflow_work; struct sk_buff *tx_hwtstamp_skb; unsigned long tx_hwtstamp_start; @@ -326,7 +330,7 @@ struct e1000_adapter { struct ptp_clock *ptp_clock; struct ptp_clock_info ptp_clock_info; struct pm_qos_request pm_qos_req; - s32 ptp_delta; + long ptp_delta; u16 eee_advert; }; @@ -356,23 +360,43 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n) * bits to count nanoseconds leaving the rest for fractional nonseconds. + * + * Any given INCVALUE also has an associated maximum adjustment value. This + * maximum adjustment value is the largest increase (or decrease) which can be + * safely applied without overflowing the INCVALUE. Since INCVALUE has + * a maximum range of 24 bits, its largest value is 0xFFFFFF. + * + * To understand where the maximum value comes from, consider the following + * equation: + * + * new_incval = base_incval + (base_incval * adjustment) / 1billion + * + * To avoid overflow that means: + * max_incval = base_incval + (base_incval * max_adj) / billion + * + * Re-arranging: + * max_adj = floor(((max_incval - base_incval) * 1billion) / 1billion) */ #define INCVALUE_96MHZ 125 #define INCVALUE_SHIFT_96MHZ 17 #define INCPERIOD_SHIFT_96MHZ 2 #define INCPERIOD_96MHZ (12 >> INCPERIOD_SHIFT_96MHZ) +#define MAX_PPB_96MHZ 23999900 /* 23,999,900 ppb */ #define INCVALUE_25MHZ 40 #define INCVALUE_SHIFT_25MHZ 18 #define INCPERIOD_25MHZ 1 +#define MAX_PPB_25MHZ 599999900 /* 599,999,900 ppb */ #define INCVALUE_24MHZ 125 #define INCVALUE_SHIFT_24MHZ 14 #define INCPERIOD_24MHZ 3 +#define MAX_PPB_24MHZ 999999999 /* 999,999,999 ppb */ #define INCVALUE_38400KHZ 26 #define INCVALUE_SHIFT_38400KHZ 19 #define INCPERIOD_38400KHZ 1 +#define MAX_PPB_38400KHZ 230769100 /* 230,769,100 ppb */ /* Another drawback of scaling the incvalue by a large factor is the * 64-bit SYSTIM register overflows more quickly. This is dealt with @@ -437,6 +461,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca); #define FLAG2_CHECK_RX_HWTSTAMP BIT(13) #define FLAG2_CHECK_SYSTIM_OVERFLOW BIT(14) #define FLAG2_ENABLE_S0IX_FLOWS BIT(15) +#define FLAG2_DISABLE_K1 BIT(16) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) @@ -499,6 +524,9 @@ extern const struct e1000_info e1000_pch2_info; extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_pch_spt_info; extern const struct e1000_info e1000_pch_cnp_info; +extern const struct e1000_info e1000_pch_tgp_info; +extern const struct e1000_info e1000_pch_adp_info; +extern const struct e1000_info e1000_pch_mtp_info; extern const struct e1000_info e1000_es2_info; void e1000e_ptp_init(struct e1000_adapter *adapter); |