diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 126 |
1 files changed, 121 insertions, 5 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index f9e94be36e97..364378133526 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -286,6 +286,45 @@ static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) } /** + * e1000_reconfigure_k1_exit_timeout - reconfigure K1 exit timeout to + * align to MTP and later platform requirements. + * @hw: pointer to the HW structure + * + * Context: PHY semaphore must be held by caller. + * Return: 0 on success, negative on failure + */ +static s32 e1000_reconfigure_k1_exit_timeout(struct e1000_hw *hw) +{ + u16 phy_timeout; + u32 fextnvm12; + s32 ret_val; + + if (hw->mac.type < e1000_pch_mtp) + return 0; + + /* Change Kumeran K1 power down state from P0s to P1 */ + fextnvm12 = er32(FEXTNVM12); + fextnvm12 &= ~E1000_FEXTNVM12_PHYPD_CTRL_MASK; + fextnvm12 |= E1000_FEXTNVM12_PHYPD_CTRL_P1; + ew32(FEXTNVM12, fextnvm12); + + /* Wait for the interface the settle */ + usleep_range(1000, 1100); + + /* Change K1 exit timeout */ + ret_val = e1e_rphy_locked(hw, I217_PHY_TIMEOUTS_REG, + &phy_timeout); + if (ret_val) + return ret_val; + + phy_timeout &= ~I217_PHY_TIMEOUTS_K1_EXIT_TO_MASK; + phy_timeout |= 0xF00; + + return e1e_wphy_locked(hw, I217_PHY_TIMEOUTS_REG, + phy_timeout); +} + +/** * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds * @hw: pointer to the HW structure * @@ -327,15 +366,22 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) * LANPHYPC Value bit to force the interconnect to PCIe mode. */ switch (hw->mac.type) { + case e1000_pch_mtp: + case e1000_pch_lnp: + case e1000_pch_ptp: + case e1000_pch_nvp: + /* At this point the PHY might be inaccessible so don't + * propagate the failure + */ + if (e1000_reconfigure_k1_exit_timeout(hw)) + e_dbg("Failed to reconfigure K1 exit timeout\n"); + + fallthrough; case e1000_pch_lpt: case e1000_pch_spt: case e1000_pch_cnp: case e1000_pch_tgp: case e1000_pch_adp: - case e1000_pch_mtp: - case e1000_pch_lnp: - case e1000_pch_ptp: - case e1000_pch_nvp: if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -419,8 +465,20 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) * the PHY is in. */ ret_val = hw->phy.ops.check_reset_block(hw); - if (ret_val) + if (ret_val) { e_err("ME blocked access to PHY after reset\n"); + goto out; + } + + if (hw->mac.type >= e1000_pch_mtp) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_err("Failed to reconfigure K1 exit timeout\n"); + goto out; + } + ret_val = e1000_reconfigure_k1_exit_timeout(hw); + hw->phy.ops.release(hw); + } } out: @@ -1109,6 +1167,46 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000e_force_smbus - Force interfaces to transition to SMBUS mode. + * @hw: pointer to the HW structure + * + * Force the MAC and the PHY to SMBUS mode. Assumes semaphore already + * acquired. + * + * Return: 0 on success, negative errno on failure. + **/ +static s32 e1000e_force_smbus(struct e1000_hw *hw) +{ + u16 smb_ctrl = 0; + u32 ctrl_ext; + s32 ret_val; + + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + /* Force SMBus mode in the PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &smb_ctrl); + if (ret_val) { + e1000e_enable_phy_retry(hw); + return ret_val; + } + + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in the MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); + + return 0; +} + +/** * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP * @hw: pointer to the HW structure * @to_sx: boolean indicating a system power state transition to Sx @@ -1165,6 +1263,12 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; + ret_val = e1000e_force_smbus(hw); + if (ret_val) { + e_dbg("Failed to force SMBUS: %d\n", ret_val); + goto release; + } + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ @@ -4842,6 +4946,18 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) u16 i; e1000_initialize_hw_bits_ich8lan(hw); + if (hw->mac.type >= e1000_pch_mtp) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_reconfigure_k1_exit_timeout(hw); + hw->phy.ops.release(hw); + if (ret_val) { + e_dbg("Error failed to reconfigure K1 exit timeout\n"); + return ret_val; + } + } /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); |