1 files changed, 165 insertions, 25 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 0c7fd10312c8..0ff8688ac3b8 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -222,11 +222,18 @@ out:
 	if (hw->mac.type >= e1000_pch_lpt) {
 		/* Only unforce SMBus if ME is not active */
 		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+			/* Switching PHY interface always returns MDI error
+			 * so disable retry mechanism to avoid wasting time
+			 */
+			e1000e_disable_phy_retry(hw);
+
 			/* Unforce SMBus mode in PHY */
 			e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg);
 			phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
 			e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg);
 
+			e1000e_enable_phy_retry(hw);
+
 			/* Unforce SMBus mode in MAC */
 			mac_reg = er32(CTRL_EXT);
 			mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
@@ -279,6 +286,52 @@ static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
 }
 
 /**
+ * e1000_reconfigure_k1_params - reconfigure Kumeran K1 parameters.
+ * @hw: pointer to the HW structure
+ *
+ * By default K1 is enabled after MAC reset, so this function only
+ * disables it.
+ *
+ * Context: PHY semaphore must be held by caller.
+ * Return: 0 on success, negative on failure
+ */
+static s32 e1000_reconfigure_k1_params(struct e1000_hw *hw)
+{
+	u16 phy_timeout;
+	u32 fextnvm12;
+	s32 ret_val;
+
+	if (hw->mac.type < e1000_pch_mtp) {
+		if (hw->adapter->flags2 & FLAG2_DISABLE_K1)
+			return e1000_configure_k1_ich8lan(hw, false);
+		return 0;
+	}
+
+	/* Change Kumeran K1 power down state from P0s to P1 */
+	fextnvm12 = er32(FEXTNVM12);
+	fextnvm12 &= ~E1000_FEXTNVM12_PHYPD_CTRL_MASK;
+	fextnvm12 |= E1000_FEXTNVM12_PHYPD_CTRL_P1;
+	ew32(FEXTNVM12, fextnvm12);
+
+	/* Wait for the interface the settle */
+	usleep_range(1000, 1100);
+	if (hw->adapter->flags2 & FLAG2_DISABLE_K1)
+		return e1000_configure_k1_ich8lan(hw, false);
+
+	/* Change K1 exit timeout */
+	ret_val = e1e_rphy_locked(hw, I217_PHY_TIMEOUTS_REG,
+				  &phy_timeout);
+	if (ret_val)
+		return ret_val;
+
+	phy_timeout &= ~I217_PHY_TIMEOUTS_K1_EXIT_TO_MASK;
+	phy_timeout |= 0xF00;
+
+	return e1e_wphy_locked(hw, I217_PHY_TIMEOUTS_REG,
+				  phy_timeout);
+}
+
+/**
  *  e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
  *  @hw: pointer to the HW structure
  *
@@ -310,19 +363,32 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		goto out;
 	}
 
+	/* There is no guarantee that the PHY is accessible at this time
+	 * so disable retry mechanism to avoid wasting time
+	 */
+	e1000e_disable_phy_retry(hw);
+
 	/* The MAC-PHY interconnect may be in SMBus mode.  If the PHY is
 	 * inaccessible and resetting the PHY is not blocked, toggle the
 	 * LANPHYPC Value bit to force the interconnect to PCIe mode.
 	 */
 	switch (hw->mac.type) {
+	case e1000_pch_mtp:
+	case e1000_pch_lnp:
+	case e1000_pch_ptp:
+	case e1000_pch_nvp:
+		/* At this point the PHY might be inaccessible so don't
+		 * propagate the failure
+		 */
+		if (e1000_reconfigure_k1_params(hw))
+			e_dbg("Failed to reconfigure K1 parameters\n");
+
+		fallthrough;
 	case e1000_pch_lpt:
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
 	case e1000_pch_adp:
-	case e1000_pch_mtp:
-	case e1000_pch_lnp:
-	case e1000_pch_ptp:
 		if (e1000_phy_is_accessible_pchlan(hw))
 			break;
 
@@ -379,6 +445,8 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		break;
 	}
 
+	e1000e_enable_phy_retry(hw);
+
 	hw->phy.ops.release(hw);
 	if (!ret_val) {
 
@@ -404,8 +472,20 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		 *  the PHY is in.
 		 */
 		ret_val = hw->phy.ops.check_reset_block(hw);
-		if (ret_val)
+		if (ret_val) {
 			e_err("ME blocked access to PHY after reset\n");
+			goto out;
+		}
+
+		if (hw->mac.type >= e1000_pch_mtp) {
+			ret_val = hw->phy.ops.acquire(hw);
+			if (ret_val) {
+				e_err("Failed to reconfigure K1 parameters\n");
+				goto out;
+			}
+			ret_val = e1000_reconfigure_k1_params(hw);
+			hw->phy.ops.release(hw);
+		}
 	}
 
 out:
@@ -448,6 +528,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 
 	phy->id = e1000_phy_unknown;
 
+	if (hw->mac.type == e1000_pch_mtp) {
+		phy->retry_count = 2;
+		e1000e_enable_phy_retry(hw);
+	}
+
 	ret_val = e1000_init_phy_workarounds_pchlan(hw);
 	if (ret_val)
 		return ret_val;
@@ -470,6 +555,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		case e1000_pch_mtp:
 		case e1000_pch_lnp:
 		case e1000_pch_ptp:
+		case e1000_pch_nvp:
 			/* In case the PHY needs to be in mdio slow mode,
 			 * set slow mode and try to get the PHY id again.
 			 */
@@ -717,6 +803,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
+	case e1000_pch_nvp:
 	case e1000_pchlan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
@@ -1069,13 +1156,11 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 
 		lat_enc_d = (lat_enc & E1000_LTRV_VALUE_MASK) *
 			     (1U << (E1000_LTRV_SCALE_FACTOR *
-			     ((lat_enc & E1000_LTRV_SCALE_MASK)
-			     >> E1000_LTRV_SCALE_SHIFT)));
+			     FIELD_GET(E1000_LTRV_SCALE_MASK, lat_enc)));
 
 		max_ltr_enc_d = (max_ltr_enc & E1000_LTRV_VALUE_MASK) *
-				 (1U << (E1000_LTRV_SCALE_FACTOR *
-				 ((max_ltr_enc & E1000_LTRV_SCALE_MASK)
-				 >> E1000_LTRV_SCALE_SHIFT)));
+			(1U << (E1000_LTRV_SCALE_FACTOR *
+				FIELD_GET(E1000_LTRV_SCALE_MASK, max_ltr_enc)));
 
 		if (lat_enc_d > max_ltr_enc_d)
 			lat_enc = max_ltr_enc;
@@ -1089,6 +1174,46 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
 }
 
 /**
+ *  e1000e_force_smbus - Force interfaces to transition to SMBUS mode.
+ *  @hw: pointer to the HW structure
+ *
+ *  Force the MAC and the PHY to SMBUS mode. Assumes semaphore already
+ *  acquired.
+ *
+ * Return: 0 on success, negative errno on failure.
+ **/
+static s32 e1000e_force_smbus(struct e1000_hw *hw)
+{
+	u16 smb_ctrl = 0;
+	u32 ctrl_ext;
+	s32 ret_val;
+
+	/* Switching PHY interface always returns MDI error
+	 * so disable retry mechanism to avoid wasting time
+	 */
+	e1000e_disable_phy_retry(hw);
+
+	/* Force SMBus mode in the PHY */
+	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &smb_ctrl);
+	if (ret_val) {
+		e1000e_enable_phy_retry(hw);
+		return ret_val;
+	}
+
+	smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS;
+	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, smb_ctrl);
+
+	e1000e_enable_phy_retry(hw);
+
+	/* Force SMBus mode in the MAC */
+	ctrl_ext = er32(CTRL_EXT);
+	ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS;
+	ew32(CTRL_EXT, ctrl_ext);
+
+	return 0;
+}
+
+/**
  *  e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
  *  @hw: pointer to the HW structure
  *  @to_sx: boolean indicating a system power state transition to Sx
@@ -1145,17 +1270,11 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
 	if (ret_val)
 		goto out;
 
-	/* Force SMBus mode in PHY */
-	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
-	if (ret_val)
+	ret_val = e1000e_force_smbus(hw);
+	if (ret_val) {
+		e_dbg("Failed to force SMBUS: %d\n", ret_val);
 		goto release;
-	phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
-	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
-
-	/* Force SMBus mode in MAC */
-	mac_reg = er32(CTRL_EXT);
-	mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
-	ew32(CTRL_EXT, mac_reg);
+	}
 
 	/* Si workaround for ULP entry flow on i127/rev6 h/w.  Enable
 	 * LPLU and disable Gig speed when entering ULP
@@ -1312,6 +1431,11 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
 		/* Toggle LANPHYPC Value bit */
 		e1000_toggle_lanphypc_pch_lpt(hw);
 
+	/* Switching PHY interface always returns MDI error
+	 * so disable retry mechanism to avoid wasting time
+	 */
+	e1000e_disable_phy_retry(hw);
+
 	/* Unforce SMBus mode in PHY */
 	ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
 	if (ret_val) {
@@ -1332,6 +1456,8 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
 	phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
 	e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
 
+	e1000e_enable_phy_retry(hw);
+
 	/* Unforce SMBus mode in MAC */
 	mac_reg = er32(CTRL_EXT);
 	mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
@@ -1685,6 +1811,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
+	case e1000_pch_nvp:
 		rc = e1000_init_phy_params_pchlan(hw);
 		break;
 	default:
@@ -2071,8 +2198,7 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
 {
 	u16 phy_data;
 	u32 strap = er32(STRAP);
-	u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >>
-	    E1000_STRAP_SMT_FREQ_SHIFT;
+	u32 freq = FIELD_GET(E1000_STRAP_SMT_FREQ_MASK, strap);
 	s32 ret_val;
 
 	strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
@@ -2142,6 +2268,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
+	case e1000_pch_nvp:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
 		break;
 	default:
@@ -2557,8 +2684,7 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
 		hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
 					   (u16)(mac_reg & 0xFFFF));
 		hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
-					   (u16)((mac_reg & E1000_RAH_AV)
-						 >> 16));
+					   (u16)((mac_reg & E1000_RAH_AV) >> 16));
 	}
 
 	e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
@@ -3188,6 +3314,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
+	case e1000_pch_nvp:
 		bank1_offset = nvm->flash_bank_size;
 		act_offset = E1000_ICH_NVM_SIG_WORD;
 
@@ -3199,7 +3326,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 							 &nvm_dword);
 		if (ret_val)
 			return ret_val;
-		sig_byte = (u8)((nvm_dword & 0xFF00) >> 8);
+		sig_byte = FIELD_GET(0xFF00, nvm_dword);
 		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
 		    E1000_ICH_NVM_SIG_VALUE) {
 			*bank = 0;
@@ -3212,7 +3339,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 							 &nvm_dword);
 		if (ret_val)
 			return ret_val;
-		sig_byte = (u8)((nvm_dword & 0xFF00) >> 8);
+		sig_byte = FIELD_GET(0xFF00, nvm_dword);
 		if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
 		    E1000_ICH_NVM_SIG_VALUE) {
 			*bank = 1;
@@ -4129,6 +4256,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_mtp:
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
+	case e1000_pch_nvp:
 		word = NVM_COMPAT;
 		valid_csum_mask = NVM_COMPAT_VALID_CSUM;
 		break;
@@ -4153,6 +4281,8 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 			ret_val = e1000e_update_nvm_checksum(hw);
 			if (ret_val)
 				return ret_val;
+		} else if (hw->mac.type == e1000_pch_tgp) {
+			return 0;
 		}
 	}
 
@@ -4825,6 +4955,16 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	u16 i;
 
 	e1000_initialize_hw_bits_ich8lan(hw);
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = e1000_reconfigure_k1_params(hw);
+	hw->phy.ops.release(hw);
+	if (ret_val) {
+		e_dbg("Error failed to reconfigure K1 parameters\n");
+		return ret_val;
+	}
 
 	/* Initialize identification LED */
 	ret_val = mac->ops.id_led_init(hw);