summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ich8lan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c427
1 files changed, 365 insertions, 62 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 42f0f6717511..9866f264f55e 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1,30 +1,23 @@
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2013 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+/* Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
/* 82562G 10/100 Network Connection
* 82562G-2 10/100 Network Connection
@@ -53,6 +46,14 @@
* 82578DC Gigabit Network Connection
* 82579LM Gigabit Network Connection
* 82579V Gigabit Network Connection
+ * Ethernet Connection I217-LM
+ * Ethernet Connection I217-V
+ * Ethernet Connection I218-V
+ * Ethernet Connection I218-LM
+ * Ethernet Connection (2) I218-LM
+ * Ethernet Connection (2) I218-V
+ * Ethernet Connection (3) I218-LM
+ * Ethernet Connection (3) I218-V
*/
#include "e1000.h"
@@ -142,7 +143,9 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index);
static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force);
static s32 e1000_setup_copper_link_pch_lpt(struct e1000_hw *hw);
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -239,6 +242,47 @@ out:
}
/**
+ * e1000_toggle_lanphypc_pch_lpt - toggle the LANPHYPC pin value
+ * @hw: pointer to the HW structure
+ *
+ * Toggling the LANPHYPC pin value fully power-cycles the PHY and is
+ * used to reset the PHY to a quiescent state when necessary.
+ **/
+static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw)
+{
+ u32 mac_reg;
+
+ /* Set Phy Config Counter to 50msec */
+ mac_reg = er32(FEXTNVM3);
+ mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+ mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+ ew32(FEXTNVM3, mac_reg);
+
+ /* Toggle LANPHYPC Value bit */
+ mac_reg = er32(CTRL);
+ mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ usleep_range(10, 20);
+ mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+
+ if (hw->mac.type < e1000_pch_lpt) {
+ msleep(50);
+ } else {
+ u16 count = 20;
+
+ do {
+ usleep_range(5000, 10000);
+ } while (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LPCD) && count--);
+
+ msleep(30);
+ }
+}
+
+/**
* e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
* @hw: pointer to the HW structure
*
@@ -247,6 +291,7 @@ out:
**/
static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
{
+ struct e1000_adapter *adapter = hw->adapter;
u32 mac_reg, fwsm = er32(FWSM);
s32 ret_val;
@@ -255,6 +300,12 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
*/
e1000_gate_hw_phy_config_ich8lan(hw, true);
+ /* It is not possible to be certain of the current state of ULP
+ * so forcibly disable it.
+ */
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
+ e1000_disable_ulp_lpt_lp(hw, true);
+
ret_val = hw->phy.ops.acquire(hw);
if (ret_val) {
e_dbg("Failed to initialize PHY flow\n");
@@ -300,33 +351,9 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
break;
}
- e_dbg("Toggling LANPHYPC\n");
-
- /* Set Phy Config Counter to 50msec */
- mac_reg = er32(FEXTNVM3);
- mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
- mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
- ew32(FEXTNVM3, mac_reg);
-
/* Toggle LANPHYPC Value bit */
- mac_reg = er32(CTRL);
- mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
- mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, mac_reg);
- e1e_flush();
- usleep_range(10, 20);
- mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, mac_reg);
- e1e_flush();
- if (hw->mac.type < e1000_pch_lpt) {
- msleep(50);
- } else {
- u16 count = 20;
- do {
- usleep_range(5000, 10000);
- } while (!(er32(CTRL_EXT) &
- E1000_CTRL_EXT_LPCD) && count--);
- usleep_range(30000, 60000);
+ e1000_toggle_lanphypc_pch_lpt(hw);
+ if (hw->mac.type >= e1000_pch_lpt) {
if (e1000_phy_is_accessible_pchlan(hw))
break;
@@ -349,12 +376,31 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
hw->phy.ops.release(hw);
if (!ret_val) {
+
+ /* Check to see if able to reset PHY. Print error if not */
+ if (hw->phy.ops.check_reset_block(hw)) {
+ e_err("Reset blocked by ME\n");
+ goto out;
+ }
+
/* Reset the PHY before any access to it. Doing so, ensures
* that the PHY is in a known good state before we read/write
* PHY registers. The generic reset is sufficient here,
* because we haven't determined the PHY type yet.
*/
ret_val = e1000e_phy_hw_reset_generic(hw);
+ if (ret_val)
+ goto out;
+
+ /* On a successful reset, possibly need to wait for the PHY
+ * to quiesce to an accessible state before returning control
+ * to the calling function. If the PHY does not quiesce, then
+ * return E1000E_BLK_PHY_RESET, as this is the condition that
+ * the PHY is in.
+ */
+ ret_val = hw->phy.ops.check_reset_block(hw);
+ if (ret_val)
+ e_err("ME blocked access to PHY after reset\n");
}
out:
@@ -724,8 +770,14 @@ s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
* Enable/disable EEE based on setting in dev_spec structure, the duplex of
* the link and the EEE capabilities of the link partner. The LPI Control
* register bits will remain set only if/when link is up.
+ *
+ * EEE LPI must not be asserted earlier than one second after link is up.
+ * On 82579, EEE LPI should not be enabled until such time otherwise there
+ * can be link issues with some switches. Other devices can have EEE LPI
+ * enabled immediately upon link up since they have a timer in hardware which
+ * prevents LPI from being asserted too early.
**/
-static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
s32 ret_val;
@@ -979,6 +1031,253 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link)
}
/**
+ * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @to_sx: boolean indicating a system power state transition to Sx
+ *
+ * When link is down, configure ULP mode to significantly reduce the power
+ * to the PHY. If on a Manageability Engine (ME) enabled system, tell the
+ * ME firmware to start the ULP configuration. If not on an ME enabled
+ * system, configure the ULP mode by software.
+ */
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
+{
+ u32 mac_reg;
+ s32 ret_val = 0;
+ u16 phy_reg;
+
+ if ((hw->mac.type < e1000_pch_lpt) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+ (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_on))
+ return 0;
+
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ /* Request ME configure ULP mode in the PHY */
+ mac_reg = er32(H2ME);
+ mac_reg |= E1000_H2ME_ULP | E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+
+ goto out;
+ }
+
+ if (!to_sx) {
+ int i = 0;
+
+ /* Poll up to 5 seconds for Cable Disconnected indication */
+ while (!(er32(FEXT) & E1000_FEXT_PHY_CABLE_DISCONNECTED)) {
+ /* Bail if link is re-acquired */
+ if (er32(STATUS) & E1000_STATUS_LU)
+ return -E1000_ERR_PHY;
+
+ if (i++ == 100)
+ break;
+
+ msleep(50);
+ }
+ e_dbg("CABLE_DISCONNECTED %s set after %dmsec\n",
+ (er32(FEXT) &
+ E1000_FEXT_PHY_CABLE_DISCONNECTED) ? "" : "not", i * 50);
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /* Force SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Force SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ /* Set Inband ULP Exit, Reset to SMBus mode and
+ * Disable SMBus Release on PERST# in PHY
+ */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= (I218_ULP_CONFIG1_RESET_TO_SMBUS |
+ I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+ if (to_sx) {
+ if (er32(WUFC) & E1000_WUFC_LNKC)
+ phy_reg |= I218_ULP_CONFIG1_WOL_HOST;
+
+ phy_reg |= I218_ULP_CONFIG1_STICKY_ULP;
+ } else {
+ phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT;
+ }
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Set Disable SMBus Release on PERST# in MAC */
+ mac_reg = er32(FEXTNVM7);
+ mac_reg |= E1000_FEXTNVM7_DISABLE_SMB_PERST;
+ ew32(FEXTNVM7, mac_reg);
+
+ /* Commit ULP changes in PHY by starting auto ULP configuration */
+ phy_reg |= I218_ULP_CONFIG1_START;
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+release:
+ hw->phy.ops.release(hw);
+out:
+ if (ret_val)
+ e_dbg("Error in ULP enable flow: %d\n", ret_val);
+ else
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_on;
+
+ return ret_val;
+}
+
+/**
+ * e1000_disable_ulp_lpt_lp - unconfigure Ultra Low Power mode for LynxPoint-LP
+ * @hw: pointer to the HW structure
+ * @force: boolean indicating whether or not to force disabling ULP
+ *
+ * Un-configure ULP mode when link is up, the system is transitioned from
+ * Sx or the driver is unloaded. If on a Manageability Engine (ME) enabled
+ * system, poll for an indication from ME that ULP has been un-configured.
+ * If not on an ME enabled system, un-configure the ULP mode by software.
+ *
+ * During nominal operation, this function is called when link is acquired
+ * to disable ULP mode (force=false); otherwise, for example when unloading
+ * the driver or during Sx->S0 transitions, this is called with force=true
+ * to forcibly disable ULP.
+ */
+static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
+{
+ s32 ret_val = 0;
+ u32 mac_reg;
+ u16 phy_reg;
+ int i = 0;
+
+ if ((hw->mac.type < e1000_pch_lpt) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_V) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_LM2) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V2) ||
+ (hw->dev_spec.ich8lan.ulp_state == e1000_ulp_state_off))
+ return 0;
+
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ if (force) {
+ /* Request ME un-configure ULP mode in the PHY */
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ULP;
+ mac_reg |= E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+ }
+
+ /* Poll up to 100msec for ME to clear ULP_CFG_DONE */
+ while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
+ if (i++ == 10) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ usleep_range(10000, 20000);
+ }
+ e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
+
+ if (force) {
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ENFORCE_SETTINGS;
+ ew32(H2ME, mac_reg);
+ } else {
+ /* Clear H2ME.ULP after ME ULP configuration */
+ mac_reg = er32(H2ME);
+ mac_reg &= ~E1000_H2ME_ULP;
+ ew32(H2ME, mac_reg);
+ }
+
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (force)
+ /* Toggle LANPHYPC Value bit */
+ e1000_toggle_lanphypc_pch_lpt(hw);
+
+ /* Unforce SMBus mode in PHY */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
+ if (ret_val) {
+ /* The MAC might be in PCIe mode, so temporarily force to
+ * SMBus mode in order to access the PHY.
+ */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ msleep(50);
+
+ ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL,
+ &phy_reg);
+ if (ret_val)
+ goto release;
+ }
+ phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
+
+ /* Unforce SMBus mode in MAC */
+ mac_reg = er32(CTRL_EXT);
+ mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_reg);
+
+ /* When ULP mode was previously entered, K1 was disabled by the
+ * hardware. Re-Enable K1 in the PHY when exiting ULP.
+ */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, HV_PM_CTRL, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg |= HV_PM_CTRL_K1_ENABLE;
+ e1000_write_phy_reg_hv_locked(hw, HV_PM_CTRL, phy_reg);
+
+ /* Clear ULP enabled configuration */
+ ret_val = e1000_read_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, &phy_reg);
+ if (ret_val)
+ goto release;
+ phy_reg &= ~(I218_ULP_CONFIG1_IND |
+ I218_ULP_CONFIG1_STICKY_ULP |
+ I218_ULP_CONFIG1_RESET_TO_SMBUS |
+ I218_ULP_CONFIG1_WOL_HOST |
+ I218_ULP_CONFIG1_INBAND_EXIT |
+ I218_ULP_CONFIG1_DISABLE_SMB_PERST);
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Commit ULP changes by starting auto ULP configuration */
+ phy_reg |= I218_ULP_CONFIG1_START;
+ e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg);
+
+ /* Clear Disable SMBus Release on PERST# in MAC */
+ mac_reg = er32(FEXTNVM7);
+ mac_reg &= ~E1000_FEXTNVM7_DISABLE_SMB_PERST;
+ ew32(FEXTNVM7, mac_reg);
+
+release:
+ hw->phy.ops.release(hw);
+ if (force) {
+ e1000_phy_hw_reset(hw);
+ msleep(50);
+ }
+out:
+ if (ret_val)
+ e_dbg("Error in ULP disable flow: %d\n", ret_val);
+ else
+ hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_off;
+
+ return ret_val;
+}
+
+/**
* e1000_check_for_copper_link_ich8lan - Check for link (Copper)
* @hw: pointer to the HW structure
*
@@ -1106,9 +1405,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
e1000e_check_downshift(hw);
/* Enable/Disable EEE after link up */
- ret_val = e1000_set_eee_pchlan(hw);
- if (ret_val)
- return ret_val;
+ if (hw->phy.type > e1000_phy_82579) {
+ ret_val = e1000_set_eee_pchlan(hw);
+ if (ret_val)
+ return ret_val;
+ }
/* If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
@@ -1374,7 +1675,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index)
/* RAR[1-6] are owned by manageability. Skip those and program the
* next address into the SHRA register array.
*/
- if (index < (u32)(hw->mac.rar_entry_count - 6)) {
+ if (index < (u32)(hw->mac.rar_entry_count)) {
s32 ret_val;
ret_val = e1000_acquire_swflag_ich8lan(hw);
@@ -1484,11 +1785,13 @@ out:
**/
static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
{
- u32 fwsm;
+ bool blocked = false;
+ int i = 0;
- fwsm = er32(FWSM);
-
- return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
+ while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) &&
+ (i++ < 10))
+ usleep_range(10000, 20000);
+ return blocked ? E1000_BLK_PHY_RESET : 0;
}
/**