diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/param.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/param.c | 57 |
1 files changed, 27 insertions, 30 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index c16bd75b6caa..3132d8f2f207 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -1,30 +1,5 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ #include <linux/netdevice.h> #include <linux/module.h> @@ -80,17 +55,25 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); /* Receive Interrupt Delay in units of 1.024 microseconds * hardware will likely hang if you set this to anything but zero. * + * Burst variant is used as default if device has FLAG2_DMA_BURST. + * * Valid Range: 0-65535 */ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); +#define DEFAULT_RDTR 0 +#define BURST_RDTR 0x20 #define MAX_RXDELAY 0xFFFF #define MIN_RXDELAY 0 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds * + * Burst variant is used as default if device has FLAG2_DMA_BURST. + * * Valid Range: 0-65535 */ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); +#define DEFAULT_RADV 8 +#define BURST_RADV 0x20 #define MAX_RXABSDELAY 0xFFFF #define MIN_RXABSDELAY 0 @@ -118,8 +101,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); * demoted to the most advanced interrupt mode available. */ E1000_PARAM(IntMode, "Interrupt Mode"); -#define MAX_INTMODE 2 -#define MIN_INTMODE 0 /* Enable Smart Power Down of the PHY * @@ -304,6 +285,9 @@ void e1000e_check_options(struct e1000_adapter *adapter) .max = MAX_RXDELAY } } }; + if (adapter->flags2 & FLAG2_DMA_BURST) + opt.def = BURST_RDTR; + if (num_RxIntDelay > bd) { adapter->rx_int_delay = RxIntDelay[bd]; e1000_validate_option(&adapter->rx_int_delay, &opt, @@ -314,7 +298,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) } /* Receive Absolute Interrupt Delay */ { - static const struct e1000_option opt = { + static struct e1000_option opt = { .type = range_option, .name = "Receive Absolute Interrupt Delay", .err = "using default of " @@ -324,6 +308,9 @@ void e1000e_check_options(struct e1000_adapter *adapter) .max = MAX_RXABSDELAY } } }; + if (adapter->flags2 & FLAG2_DMA_BURST) + opt.def = BURST_RADV; + if (num_RxAbsIntDelay > bd) { adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; e1000_validate_option(&adapter->rx_abs_int_delay, &opt, @@ -381,6 +368,12 @@ void e1000e_check_options(struct e1000_adapter *adapter) "%s set to dynamic mode\n", opt.name); adapter->itr = 20000; break; + case 2: + dev_info(&adapter->pdev->dev, + "%s Invalid mode - setting default\n", + opt.name); + adapter->itr_setting = opt.def; + fallthrough; case 3: dev_info(&adapter->pdev->dev, "%s set to dynamic conservative mode\n", @@ -437,6 +430,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_IntMode > bd) { unsigned int int_mode = IntMode[bd]; + e1000_validate_option(&int_mode, &opt, adapter); adapter->int_mode = int_mode; } else { @@ -458,6 +452,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_SmartPowerDownEnable > bd) { unsigned int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd) adapter->flags |= FLAG_SMART_POWER_DOWN; @@ -474,6 +469,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_CrcStripping > bd) { unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); if (crc_stripping == OPTION_ENABLED) { adapter->flags2 |= FLAG2_CRC_STRIPPING; @@ -496,6 +492,7 @@ void e1000e_check_options(struct e1000_adapter *adapter) if (num_KumeranLockLoss > bd) { unsigned int kmrn_lock_loss = KumeranLockLoss[bd]; + e1000_validate_option(&kmrn_lock_loss, &opt, adapter); enabled = kmrn_lock_loss; } |