diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/phy.c | 287 |
1 files changed, 166 insertions, 121 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index da2be59505c0..f7ae0e0aa4a4 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1,32 +1,8 @@ -/******************************************************************************* - - Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - Linux NICS <linux.nics@intel.com> - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ #include "e1000.h" +#include <linux/ethtool.h> static s32 e1000_wait_autoneg(struct e1000_hw *hw); static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, @@ -131,6 +107,16 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0); } +void e1000e_disable_phy_retry(struct e1000_hw *hw) +{ + hw->phy.retry_enabled = false; +} + +void e1000e_enable_phy_retry(struct e1000_hw *hw) +{ + hw->phy.retry_enabled = true; +} + /** * e1000e_read_phy_reg_mdic - Read MDI control register * @hw: pointer to the HW structure @@ -142,57 +128,73 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) **/ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) { + u32 i, mdic = 0, retry_counter, retry_max; struct e1000_phy_info *phy = &hw->phy; - u32 i, mdic = 0; + bool success; if (offset > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } + retry_max = phy->retry_enabled ? phy->retry_count : 0; + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ - mdic = ((offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); + for (retry_counter = 0; retry_counter <= retry_max; retry_counter++) { + success = true; - ew32(MDIC, mdic); + mdic = ((offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); - /* Poll the ready bit to see if the MDI read completed - * Increasing the time out as testing showed failures with - * the lower time out - */ - for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - udelay(50); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Read did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - e_dbg("MDI Error\n"); - return -E1000_ERR_PHY; - } - if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { - e_dbg("MDI Read offset error - requested %d, returned %d\n", - offset, - (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); - return -E1000_ERR_PHY; - } - *data = (u16)mdic; + ew32(MDIC, mdic); - /* Allow some time after each MDIC transaction to avoid - * reading duplicate data in the next MDIC transaction. - */ - if (hw->mac.type == e1000_pch2lan) - udelay(100); + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + udelay(50); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + e_dbg("MDI Read PHY Reg Address %d did not complete\n", + offset); + success = false; + } + if (mdic & E1000_MDIC_ERROR) { + e_dbg("MDI Read PHY Reg Address %d Error\n", offset); + success = false; + } + if (FIELD_GET(E1000_MDIC_REG_MASK, mdic) != offset) { + e_dbg("MDI Read offset error - requested %d, returned %d\n", + offset, FIELD_GET(E1000_MDIC_REG_MASK, mdic)); + success = false; + } - return 0; + /* Allow some time after each MDIC transaction to avoid + * reading duplicate data in the next MDIC transaction. + */ + if (hw->mac.type == e1000_pch2lan) + udelay(100); + + if (success) { + *data = (u16)mdic; + return 0; + } + + if (retry_counter != retry_max) { + e_dbg("Perform retry on PHY transaction...\n"); + mdelay(10); + } + } + + return -E1000_ERR_PHY; } /** @@ -205,57 +207,72 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) **/ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) { + u32 i, mdic = 0, retry_counter, retry_max; struct e1000_phy_info *phy = &hw->phy; - u32 i, mdic = 0; + bool success; if (offset > MAX_PHY_REG_ADDRESS) { e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } + retry_max = phy->retry_enabled ? phy->retry_count : 0; + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ - mdic = (((u32)data) | - (offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); + for (retry_counter = 0; retry_counter <= retry_max; retry_counter++) { + success = true; - ew32(MDIC, mdic); + mdic = (((u32)data) | + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); - /* Poll the ready bit to see if the MDI read completed - * Increasing the time out as testing showed failures with - * the lower time out - */ - for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - udelay(50); - mdic = er32(MDIC); - if (mdic & E1000_MDIC_READY) - break; - } - if (!(mdic & E1000_MDIC_READY)) { - e_dbg("MDI Write did not complete\n"); - return -E1000_ERR_PHY; - } - if (mdic & E1000_MDIC_ERROR) { - e_dbg("MDI Error\n"); - return -E1000_ERR_PHY; - } - if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { - e_dbg("MDI Write offset error - requested %d, returned %d\n", - offset, - (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); - return -E1000_ERR_PHY; - } + ew32(MDIC, mdic); - /* Allow some time after each MDIC transaction to avoid - * reading duplicate data in the next MDIC transaction. - */ - if (hw->mac.type == e1000_pch2lan) - udelay(100); + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + udelay(50); + mdic = er32(MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + e_dbg("MDI Write PHY Reg Address %d did not complete\n", + offset); + success = false; + } + if (mdic & E1000_MDIC_ERROR) { + e_dbg("MDI Write PHY Reg Address %d Error\n", offset); + success = false; + } + if (FIELD_GET(E1000_MDIC_REG_MASK, mdic) != offset) { + e_dbg("MDI Write offset error - requested %d, returned %d\n", + offset, FIELD_GET(E1000_MDIC_REG_MASK, mdic)); + success = false; + } - return 0; + /* Allow some time after each MDIC transaction to avoid + * reading duplicate data in the next MDIC transaction. + */ + if (hw->mac.type == e1000_pch2lan) + udelay(100); + + if (success) + return 0; + + if (retry_counter != retry_max) { + e_dbg("Perform retry on PHY transaction...\n"); + mdelay(10); + } + } + + return -E1000_ERR_PHY; } /** @@ -396,7 +413,7 @@ s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) } /** - * e1000e_write_phy_reg_igp - Write igp PHY register + * __e1000e_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -487,8 +504,8 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, return ret_val; } - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | + E1000_KMRNCTRLSTA_REN; ew32(KMRNCTRLSTA, kmrnctrlsta); e1e_flush(); @@ -560,8 +577,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, return ret_val; } - kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | data; + kmrnctrlsta = FIELD_PREP(E1000_KMRNCTRLSTA_OFFSET, offset) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); e1e_flush(); @@ -632,7 +648,7 @@ static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) break; case e1000_ms_auto: phy_data &= ~CTL1000_ENABLE_MASTER; - /* fall-through */ + fallthrough; default: break; } @@ -1036,6 +1052,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg &= ~(ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); + phy->autoneg_advertised &= + ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); break; case e1000_fc_rx_pause: /* Rx Flow control is enabled, and Tx Flow control is @@ -1049,6 +1067,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); + phy->autoneg_advertised |= + (ADVERTISED_Pause | ADVERTISED_Asym_Pause); break; case e1000_fc_tx_pause: /* Tx Flow control is enabled, and Rx Flow control is @@ -1056,6 +1076,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= ADVERTISE_PAUSE_ASYM; mii_autoneg_adv_reg &= ~ADVERTISE_PAUSE_CAP; + phy->autoneg_advertised |= ADVERTISED_Asym_Pause; + phy->autoneg_advertised &= ~ADVERTISED_Pause; break; case e1000_fc_full: /* Flow control (both Rx and Tx) is enabled by a software @@ -1063,6 +1085,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP); + phy->autoneg_advertised |= + (ADVERTISED_Pause | ADVERTISED_Asym_Pause); break; default: e_dbg("Flow control param set incorrectly\n"); @@ -1751,31 +1775,36 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, s32 ret_val = 0; u16 i, phy_status; + *success = false; for (i = 0; i < iterations; i++) { /* Some PHYs require the MII_BMSR register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); - if (ret_val) + if (ret_val) { /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ - udelay(usec_interval); + if (usec_interval >= 1000) + msleep(usec_interval / 1000); + else + udelay(usec_interval); + } ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); if (ret_val) break; - if (phy_status & BMSR_LSTATUS) + if (phy_status & BMSR_LSTATUS) { + *success = true; break; + } if (usec_interval >= 1000) - mdelay(usec_interval / 1000); + msleep(usec_interval / 1000); else udelay(usec_interval); } - *success = (i < iterations); - return ret_val; } @@ -1804,8 +1833,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT); + index = FIELD_GET(M88E1000_PSSR_CABLE_LENGTH, phy_data); if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) return -E1000_ERR_PHY; @@ -2331,6 +2359,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw) /** * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address * @page: page to access + * @reg: register to check * * Returns the phy address for the page requested. **/ @@ -2716,9 +2745,14 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, void e1000_power_up_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; + int ret; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, MII_BMCR, &mii_reg); + ret = e1e_rphy(hw, MII_BMCR, &mii_reg); + if (ret) { + e_dbg("Error reading PHY register\n"); + return; + } mii_reg &= ~BMCR_PDOWN; e1e_wphy(hw, MII_BMCR, mii_reg); } @@ -2734,9 +2768,14 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw) void e1000_power_down_phy_copper(struct e1000_hw *hw) { u16 mii_reg = 0; + int ret; /* The PHY will retain its settings across a power down/up cycle */ - e1e_rphy(hw, MII_BMCR, &mii_reg); + ret = e1e_rphy(hw, MII_BMCR, &mii_reg); + if (ret) { + e_dbg("Error reading PHY register\n"); + return; + } mii_reg |= BMCR_PDOWN; e1e_wphy(hw, MII_BMCR, mii_reg); usleep_range(1000, 2000); @@ -2748,6 +2787,7 @@ void e1000_power_down_phy_copper(struct e1000_hw *hw) * @offset: register offset to be read * @data: pointer to the read data * @locked: semaphore has already been acquired or not + * @page_set: BM_WUC_PAGE already set and access enabled * * Acquires semaphore, if necessary, then reads the PHY register at offset * and stores the retrieved information in data. Release any acquired @@ -2856,6 +2896,7 @@ s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data) * @offset: register offset to write to * @data: data to write at register offset * @locked: semaphore has already been acquired or not + * @page_set: BM_WUC_PAGE already set and access enabled * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. @@ -2897,10 +2938,11 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, if ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision >= 1) && (hw->phy.addr == 2) && - !(MAX_PHY_REG_ADDRESS & reg) && (data & (1 << 11))) { + !(MAX_PHY_REG_ADDRESS & reg) && (data & BIT(11))) { u16 data2 = 0x7EFF; + ret_val = e1000_access_phy_debug_regs_hv(hw, - (1 << 6) | 0x3, + BIT(6) | 0x3, &data2, false); if (ret_val) goto out; @@ -2994,7 +3036,7 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page) * @data: pointer to the data to be read or written * @read: determines if operation is read or write * - * Reads the PHY register at offset and stores the retreived information + * Reads the PHY register at offset and stores the retrieved information * in data. Assumes semaphore already acquired. Note that the procedure * to access these regs uses the address port and data port to read/write. * These accesses done with PHY address 2 and without using pages. @@ -3053,7 +3095,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) return 0; /* Do not apply workaround if in PHY loopback bit 14 set */ - e1e_rphy(hw, MII_BMCR, &data); + ret_val = e1e_rphy(hw, MII_BMCR, &data); + if (ret_val) { + e_dbg("Error reading PHY register\n"); + return ret_val; + } if (data & BMCR_LOOPBACK) return 0; @@ -3227,8 +3273,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) if (ret_val) return ret_val; - length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> - I82577_DSTATUS_CABLE_LENGTH_SHIFT); + length = FIELD_GET(I82577_DSTATUS_CABLE_LENGTH, phy_data); if (length == E1000_CABLE_LENGTH_UNDEFINED) return -E1000_ERR_PHY; |