diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/Makefile | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/defines.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/e1000.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 64 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/hw.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 126 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/mac.c | 15 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 298 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ptp.c | 3 |
10 files changed, 298 insertions, 230 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile index 0baa15503c38..18f22b6374d5 100644 --- a/drivers/net/ethernet/intel/e1000e/Makefile +++ b/drivers/net/ethernet/intel/e1000e/Makefile @@ -10,7 +10,6 @@ subdir-ccflags-y += -I$(src) obj-$(CONFIG_E1000E) += e1000e.o -e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \ - mac.o manage.o nvm.o phy.o \ - param.o ethtool.o netdev.o ptp.o - +e1000e-y := 82571.o ich8lan.o 80003es2lan.o \ + mac.o manage.o nvm.o phy.o \ + param.o ethtool.o netdev.o ptp.o diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 23a58cada43a..8294a7c4f122 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -679,8 +679,6 @@ /* PCI/PCI-X/PCI-EX Config space */ #define PCI_HEADER_TYPE_REGISTER 0x0E -#define PCI_HEADER_TYPE_MULTIFUNC 0x80 - #define PHY_REVISION_MASK 0xFFFFFFF0 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ #define MAX_PHY_MULTI_PAGE_REG 0xF @@ -805,4 +803,7 @@ /* SerDes Control */ #define E1000_GEN_POLL_TIMEOUT 640 +#define E1000_FEXTNVM12_PHYPD_CTRL_MASK 0x00C00000 +#define E1000_FEXTNVM12_PHYPD_CTRL_P1 0x00800000 + #endif /* _E1000_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index ba9c19e6994c..952898151565 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -319,7 +319,7 @@ struct e1000_adapter { u16 tx_ring_count; u16 rx_ring_count; - struct hwtstamp_config hwtstamp_config; + struct kernel_hwtstamp_config hwtstamp_config; struct delayed_work systim_overflow_work; struct sk_buff *tx_hwtstamp_skb; unsigned long tx_hwtstamp_start; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index dc553c51d79a..9364bc2b4eb1 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -156,7 +156,7 @@ static int e1000_get_link_ksettings(struct net_device *netdev, speed = adapter->link_speed; cmd->base.duplex = adapter->link_duplex - 1; } - } else if (!pm_runtime_suspended(netdev->dev.parent)) { + } else { u32 status = er32(STATUS); if (status & E1000_STATUS_LU) { @@ -274,16 +274,13 @@ static int e1000_set_link_ksettings(struct net_device *netdev, ethtool_convert_link_mode_to_legacy_u32(&advertising, cmd->link_modes.advertising); - pm_runtime_get_sync(netdev->dev.parent); - /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) { e_err("Cannot change link characteristics when SoL/IDER is active.\n"); - ret_val = -EINVAL; - goto out; + return -EINVAL; } /* MDI setting is only allowed when autoneg enabled because @@ -291,16 +288,13 @@ static int e1000_set_link_ksettings(struct net_device *netdev, * duplex is forced. */ if (cmd->base.eth_tp_mdix_ctrl) { - if (hw->phy.media_type != e1000_media_type_copper) { - ret_val = -EOPNOTSUPP; - goto out; - } + if (hw->phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; if ((cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && (cmd->base.autoneg != AUTONEG_ENABLE)) { e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); - ret_val = -EINVAL; - goto out; + return -EINVAL; } } @@ -347,7 +341,6 @@ static int e1000_set_link_ksettings(struct net_device *netdev, } out: - pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); return ret_val; } @@ -383,8 +376,6 @@ static int e1000_set_pauseparam(struct net_device *netdev, while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) usleep_range(1000, 2000); - pm_runtime_get_sync(netdev->dev.parent); - if (adapter->fc_autoneg == AUTONEG_ENABLE) { hw->fc.requested_mode = e1000_fc_default; if (netif_running(adapter->netdev)) { @@ -417,7 +408,6 @@ static int e1000_set_pauseparam(struct net_device *netdev, } out: - pm_runtime_put_sync(netdev->dev.parent); clear_bit(__E1000_RESETTING, &adapter->state); return retval; } @@ -448,8 +438,6 @@ static void e1000_get_regs(struct net_device *netdev, u32 *regs_buff = p; u16 phy_data; - pm_runtime_get_sync(netdev->dev.parent); - memset(p, 0, E1000_REGS_LEN * sizeof(u32)); regs->version = (1u << 24) | @@ -495,8 +483,6 @@ static void e1000_get_regs(struct net_device *netdev, e1e_rphy(hw, MII_STAT1000, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ - - pm_runtime_put_sync(netdev->dev.parent); } static int e1000_get_eeprom_len(struct net_device *netdev) @@ -529,8 +515,6 @@ static int e1000_get_eeprom(struct net_device *netdev, if (!eeprom_buff) return -ENOMEM; - pm_runtime_get_sync(netdev->dev.parent); - if (hw->nvm.type == e1000_nvm_eeprom_spi) { ret_val = e1000_read_nvm(hw, first_word, last_word - first_word + 1, @@ -544,8 +528,6 @@ static int e1000_get_eeprom(struct net_device *netdev, } } - pm_runtime_put_sync(netdev->dev.parent); - if (ret_val) { /* a read error occurred, throw away the result */ memset(eeprom_buff, 0xff, sizeof(u16) * @@ -595,8 +577,6 @@ static int e1000_set_eeprom(struct net_device *netdev, ptr = (void *)eeprom_buff; - pm_runtime_get_sync(netdev->dev.parent); - if (eeprom->offset & 1) { /* need read/modify/write of first changed EEPROM word */ /* only the second byte of the word is being modified */ @@ -637,7 +617,6 @@ static int e1000_set_eeprom(struct net_device *netdev, ret_val = e1000e_update_nvm_checksum(hw); out: - pm_runtime_put_sync(netdev->dev.parent); kfree(eeprom_buff); return ret_val; } @@ -733,8 +712,6 @@ static int e1000_set_ringparam(struct net_device *netdev, } } - pm_runtime_get_sync(netdev->dev.parent); - e1000e_down(adapter, true); /* We can't just free everything and then setup again, because the @@ -773,7 +750,6 @@ err_setup_rx: e1000e_free_tx_resources(temp_tx); err_setup: e1000e_up(adapter); - pm_runtime_put_sync(netdev->dev.parent); free_temp: vfree(temp_tx); vfree(temp_rx); @@ -1816,8 +1792,6 @@ static void e1000_diag_test(struct net_device *netdev, u8 autoneg; bool if_running = netif_running(netdev); - pm_runtime_get_sync(netdev->dev.parent); - set_bit(__E1000_TESTING, &adapter->state); if (!if_running) { @@ -1903,8 +1877,6 @@ static void e1000_diag_test(struct net_device *netdev, } msleep_interruptible(4 * 1000); - - pm_runtime_put_sync(netdev->dev.parent); } static void e1000_get_wol(struct net_device *netdev, @@ -2046,15 +2018,11 @@ static int e1000_set_coalesce(struct net_device *netdev, adapter->itr_setting = adapter->itr & ~3; } - pm_runtime_get_sync(netdev->dev.parent); - if (adapter->itr_setting != 0) e1000e_write_itr(adapter, adapter->itr); else e1000e_write_itr(adapter, 0); - pm_runtime_put_sync(netdev->dev.parent); - return 0; } @@ -2068,9 +2036,7 @@ static int e1000_nway_reset(struct net_device *netdev) if (!adapter->hw.mac.autoneg) return -EINVAL; - pm_runtime_get_sync(netdev->dev.parent); e1000e_reinit_locked(adapter); - pm_runtime_put_sync(netdev->dev.parent); return 0; } @@ -2084,12 +2050,8 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, int i; char *p = NULL; - pm_runtime_get_sync(netdev->dev.parent); - dev_get_stats(netdev, &net_stats); - pm_runtime_put_sync(netdev->dev.parent); - for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { switch (e1000_gstrings_stats[i].type) { case NETDEV_STATS: @@ -2146,9 +2108,7 @@ static int e1000_get_rxnfc(struct net_device *netdev, struct e1000_hw *hw = &adapter->hw; u32 mrqc; - pm_runtime_get_sync(netdev->dev.parent); mrqc = er32(MRQC); - pm_runtime_put_sync(netdev->dev.parent); if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK)) return 0; @@ -2211,13 +2171,9 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_keee *edata) return -EOPNOTSUPP; } - pm_runtime_get_sync(netdev->dev.parent); - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) { - pm_runtime_put_sync(netdev->dev.parent); + if (ret_val) return -EBUSY; - } /* EEE Capability */ ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data); @@ -2257,8 +2213,6 @@ release: if (ret_val) ret_val = -ENODATA; - pm_runtime_put_sync(netdev->dev.parent); - return ret_val; } @@ -2299,21 +2253,17 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_keee *edata) hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled; - pm_runtime_get_sync(netdev->dev.parent); - /* reset the link */ if (netif_running(netdev)) e1000e_reinit_locked(adapter); else e1000e_reset(adapter); - pm_runtime_put_sync(netdev->dev.parent); - return 0; } static int e1000e_get_ts_info(struct net_device *netdev, - struct ethtool_ts_info *info) + struct kernel_ethtool_ts_info *info) { struct e1000_adapter *adapter = netdev_priv(netdev); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 4b6e7536170a..fc8ed38aa095 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -108,8 +108,8 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_RPL_I219_V22 0x0DC8 #define E1000_DEV_ID_PCH_MTP_I219_LM18 0x550A #define E1000_DEV_ID_PCH_MTP_I219_V18 0x550B -#define E1000_DEV_ID_PCH_MTP_I219_LM19 0x550C -#define E1000_DEV_ID_PCH_MTP_I219_V19 0x550D +#define E1000_DEV_ID_PCH_ADP_I219_LM19 0x550C +#define E1000_DEV_ID_PCH_ADP_I219_V19 0x550D #define E1000_DEV_ID_PCH_LNP_I219_LM20 0x550E #define E1000_DEV_ID_PCH_LNP_I219_V20 0x550F #define E1000_DEV_ID_PCH_LNP_I219_LM21 0x5510 diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index f9e94be36e97..364378133526 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -286,6 +286,45 @@ static void e1000_toggle_lanphypc_pch_lpt(struct e1000_hw *hw) } /** + * e1000_reconfigure_k1_exit_timeout - reconfigure K1 exit timeout to + * align to MTP and later platform requirements. + * @hw: pointer to the HW structure + * + * Context: PHY semaphore must be held by caller. + * Return: 0 on success, negative on failure + */ +static s32 e1000_reconfigure_k1_exit_timeout(struct e1000_hw *hw) +{ + u16 phy_timeout; + u32 fextnvm12; + s32 ret_val; + + if (hw->mac.type < e1000_pch_mtp) + return 0; + + /* Change Kumeran K1 power down state from P0s to P1 */ + fextnvm12 = er32(FEXTNVM12); + fextnvm12 &= ~E1000_FEXTNVM12_PHYPD_CTRL_MASK; + fextnvm12 |= E1000_FEXTNVM12_PHYPD_CTRL_P1; + ew32(FEXTNVM12, fextnvm12); + + /* Wait for the interface the settle */ + usleep_range(1000, 1100); + + /* Change K1 exit timeout */ + ret_val = e1e_rphy_locked(hw, I217_PHY_TIMEOUTS_REG, + &phy_timeout); + if (ret_val) + return ret_val; + + phy_timeout &= ~I217_PHY_TIMEOUTS_K1_EXIT_TO_MASK; + phy_timeout |= 0xF00; + + return e1e_wphy_locked(hw, I217_PHY_TIMEOUTS_REG, + phy_timeout); +} + +/** * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds * @hw: pointer to the HW structure * @@ -327,15 +366,22 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) * LANPHYPC Value bit to force the interconnect to PCIe mode. */ switch (hw->mac.type) { + case e1000_pch_mtp: + case e1000_pch_lnp: + case e1000_pch_ptp: + case e1000_pch_nvp: + /* At this point the PHY might be inaccessible so don't + * propagate the failure + */ + if (e1000_reconfigure_k1_exit_timeout(hw)) + e_dbg("Failed to reconfigure K1 exit timeout\n"); + + fallthrough; case e1000_pch_lpt: case e1000_pch_spt: case e1000_pch_cnp: case e1000_pch_tgp: case e1000_pch_adp: - case e1000_pch_mtp: - case e1000_pch_lnp: - case e1000_pch_ptp: - case e1000_pch_nvp: if (e1000_phy_is_accessible_pchlan(hw)) break; @@ -419,8 +465,20 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) * the PHY is in. */ ret_val = hw->phy.ops.check_reset_block(hw); - if (ret_val) + if (ret_val) { e_err("ME blocked access to PHY after reset\n"); + goto out; + } + + if (hw->mac.type >= e1000_pch_mtp) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_err("Failed to reconfigure K1 exit timeout\n"); + goto out; + } + ret_val = e1000_reconfigure_k1_exit_timeout(hw); + hw->phy.ops.release(hw); + } } out: @@ -1109,6 +1167,46 @@ static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) } /** + * e1000e_force_smbus - Force interfaces to transition to SMBUS mode. + * @hw: pointer to the HW structure + * + * Force the MAC and the PHY to SMBUS mode. Assumes semaphore already + * acquired. + * + * Return: 0 on success, negative errno on failure. + **/ +static s32 e1000e_force_smbus(struct e1000_hw *hw) +{ + u16 smb_ctrl = 0; + u32 ctrl_ext; + s32 ret_val; + + /* Switching PHY interface always returns MDI error + * so disable retry mechanism to avoid wasting time + */ + e1000e_disable_phy_retry(hw); + + /* Force SMBus mode in the PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &smb_ctrl); + if (ret_val) { + e1000e_enable_phy_retry(hw); + return ret_val; + } + + smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, smb_ctrl); + + e1000e_enable_phy_retry(hw); + + /* Force SMBus mode in the MAC */ + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, ctrl_ext); + + return 0; +} + +/** * e1000_enable_ulp_lpt_lp - configure Ultra Low Power mode for LynxPoint-LP * @hw: pointer to the HW structure * @to_sx: boolean indicating a system power state transition to Sx @@ -1165,6 +1263,12 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; + ret_val = e1000e_force_smbus(hw); + if (ret_val) { + e_dbg("Failed to force SMBUS: %d\n", ret_val); + goto release; + } + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ @@ -4842,6 +4946,18 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) u16 i; e1000_initialize_hw_bits_ich8lan(hw); + if (hw->mac.type >= e1000_pch_mtp) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_reconfigure_k1_exit_timeout(hw); + hw->phy.ops.release(hw); + if (ret_val) { + e_dbg("Error failed to reconfigure K1 exit timeout\n"); + return ret_val; + } + } /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 2504b11c3169..5feb589a9b5f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -219,6 +219,10 @@ #define I217_PLL_CLOCK_GATE_REG PHY_REG(772, 28) #define I217_PLL_CLOCK_GATE_MASK 0x07FF +/* PHY Timeouts */ +#define I217_PHY_TIMEOUTS_REG PHY_REG(770, 21) +#define I217_PHY_TIMEOUTS_K1_EXIT_TO_MASK 0x0FC0 + #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ /* Inband Control */ diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index d7df2a0ed629..44249dd91bd6 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -331,8 +331,21 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, } /* replace the entire MTA table */ - for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) { E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); + + if (IS_ENABLED(CONFIG_PREEMPT_RT)) { + /* + * Do not queue up too many posted writes to prevent + * increased latency for other devices on the + * interconnect. Flush after each 8th posted write, + * to keep additional execution time low while still + * preventing increased latency. + */ + if (!(i % 8) && i) + e1e_flush(); + } + } e1e_flush(); } diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3692fce20195..e0f492a6723f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2928,11 +2928,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0); tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0); - writel(0, tx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_tdt_wa(tx_ring, 0); - else - writel(0, tx_ring->tail); /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); @@ -3253,11 +3250,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0); rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0); - writel(0, rx_ring->head); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, 0); - else - writel(0, rx_ring->tail); /* Enable Receive Checksum Offload for TCP and UDP */ rxcsum = er32(RXCSUM); @@ -3580,6 +3574,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable * @adapter: board private structure * @config: timestamp configuration + * @extack: netlink extended ACK for error report * * Outgoing time stamping can be enabled and disabled. Play nice and * disable it when requested, although it shouldn't cause any overhead @@ -3593,7 +3588,8 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) * exception of "all V2 events regardless of level 2 or 4". **/ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, - struct hwtstamp_config *config) + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct e1000_hw *hw = &adapter->hw; u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED; @@ -3604,8 +3600,10 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, bool is_l2 = false; u32 regval; - if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) + if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP)) { + NL_SET_ERR_MSG(extack, "No HW timestamp support"); return -EINVAL; + } switch (config->tx_type) { case HWTSTAMP_TX_OFF: @@ -3614,6 +3612,7 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, case HWTSTAMP_TX_ON: break; default: + NL_SET_ERR_MSG(extack, "Unsupported TX HW timestamp type"); return -ERANGE; } @@ -3687,6 +3686,7 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, config->rx_filter = HWTSTAMP_FILTER_ALL; break; default: + NL_SET_ERR_MSG(extack, "Unsupported RX HW timestamp filter"); return -ERANGE; } @@ -3699,7 +3699,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, ew32(TSYNCTXCTL, regval); if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) != (regval & E1000_TSYNCTXCTL_ENABLED)) { - e_err("Timesync Tx Control register not set as expected\n"); + NL_SET_ERR_MSG(extack, + "Timesync Tx Control register not set as expected"); return -EAGAIN; } @@ -3712,7 +3713,8 @@ static int e1000e_config_hwtstamp(struct e1000_adapter *adapter, E1000_TSYNCRXCTL_TYPE_MASK)) != (regval & (E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK))) { - e_err("Timesync Rx Control register not set as expected\n"); + NL_SET_ERR_MSG(extack, + "Timesync Rx Control register not set as expected"); return -EAGAIN; } @@ -3907,6 +3909,7 @@ static void e1000e_systim_reset(struct e1000_adapter *adapter) { struct ptp_clock_info *info = &adapter->ptp_clock_info; struct e1000_hw *hw = &adapter->hw; + struct netlink_ext_ack extack = {}; unsigned long flags; u32 timinca; s32 ret_val; @@ -3938,7 +3941,12 @@ static void e1000e_systim_reset(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->systim_lock, flags); /* restore the previous hwtstamp configuration settings */ - e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config); + ret_val = e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config, + &extack); + if (ret_val) { + if (extack._msg) + e_err("%s\n", extack._msg); + } } /** @@ -4293,8 +4301,8 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) napi_synchronize(&adapter->napi); - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); + timer_delete_sync(&adapter->watchdog_timer); + timer_delete_sync(&adapter->phy_info_timer); spin_lock(&adapter->stats64_lock); e1000e_update_stats(adapter); @@ -4613,6 +4621,7 @@ int e1000e_open(struct net_device *netdev) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int err; + int irq; /* disallow open during test */ if (test_bit(__E1000_TESTING, &adapter->state)) @@ -4676,7 +4685,15 @@ int e1000e_open(struct net_device *netdev) /* From here on the code is the same as e1000e_up() */ clear_bit(__E1000_DOWN, &adapter->state); + if (adapter->int_mode == E1000E_INT_MODE_MSIX) + irq = adapter->msix_entries[0].vector; + else + irq = adapter->pdev->irq; + + netif_napi_set_irq(&adapter->napi, irq); napi_enable(&adapter->napi); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_RX, &adapter->napi); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_TX, &adapter->napi); e1000_irq_enable(adapter); @@ -4735,6 +4752,8 @@ int e1000e_close(struct net_device *netdev) netdev_info(netdev, "NIC Link is Down\n"); } + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_RX, NULL); + netif_queue_set_napi(netdev, 0, NETDEV_QUEUE_TYPE_TX, NULL); napi_disable(&adapter->napi); e1000e_free_tx_resources(adapter->tx_ring); @@ -6038,7 +6057,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->max_frame_size = max_frame; netdev_dbg(netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); - netdev->mtu = new_mtu; + WRITE_ONCE(netdev->mtu, new_mtu); pm_runtime_get_sync(netdev->dev.parent); @@ -6074,8 +6093,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return 0; } -static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, - int cmd) +static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { struct e1000_adapter *adapter = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(ifr); @@ -6135,7 +6153,8 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, /** * e1000e_hwtstamp_set - control hardware time stamping * @netdev: network interface device structure - * @ifr: interface request + * @config: timestamp configuration + * @extack: netlink extended ACK report * * Outgoing time stamping can be enabled and disabled. Play nice and * disable it when requested, although it shouldn't cause any overhead @@ -6148,20 +6167,18 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, * specified. Matching the kind of event packet is not supported, with the * exception of "all V2 events regardless of level 2 or 4". **/ -static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) +static int e1000e_hwtstamp_set(struct net_device *netdev, + struct kernel_hwtstamp_config *config, + struct netlink_ext_ack *extack) { struct e1000_adapter *adapter = netdev_priv(netdev); - struct hwtstamp_config config; int ret_val; - if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) - return -EFAULT; - - ret_val = e1000e_config_hwtstamp(adapter, &config); + ret_val = e1000e_config_hwtstamp(adapter, config, extack); if (ret_val) return ret_val; - switch (config.rx_filter) { + switch (config->rx_filter) { case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_SYNC: @@ -6173,38 +6190,23 @@ static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) * by hardware so notify the caller the requested packets plus * some others are time stamped. */ - config.rx_filter = HWTSTAMP_FILTER_SOME; + config->rx_filter = HWTSTAMP_FILTER_SOME; break; default: break; } - return copy_to_user(ifr->ifr_data, &config, - sizeof(config)) ? -EFAULT : 0; + return 0; } -static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr) +static int e1000e_hwtstamp_get(struct net_device *netdev, + struct kernel_hwtstamp_config *kernel_config) { struct e1000_adapter *adapter = netdev_priv(netdev); - return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, - sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0; -} + *kernel_config = adapter->hwtstamp_config; -static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return e1000_mii_ioctl(netdev, ifr, cmd); - case SIOCSHWTSTAMP: - return e1000e_hwtstamp_set(netdev, ifr); - case SIOCGHWTSTAMP: - return e1000e_hwtstamp_get(netdev, ifr); - default: - return -EOPNOTSUPP; - } + return 0; } static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) @@ -6363,49 +6365,49 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter) mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; ew32(EXTCNF_CTRL, mac_data); - /* Enable the Dynamic Power Gating in the MAC */ - mac_data = er32(FEXTNVM7); - mac_data |= BIT(22); - ew32(FEXTNVM7, mac_data); - /* Disable disconnected cable conditioning for Power Gating */ mac_data = er32(DPGFR); mac_data |= BIT(2); ew32(DPGFR, mac_data); - /* Don't wake from dynamic Power Gating with clock request */ - mac_data = er32(FEXTNVM12); - mac_data |= BIT(12); - ew32(FEXTNVM12, mac_data); - - /* Ungate PGCB clock */ - mac_data = er32(FEXTNVM9); - mac_data &= ~BIT(28); - ew32(FEXTNVM9, mac_data); - - /* Enable K1 off to enable mPHY Power Gating */ - mac_data = er32(FEXTNVM6); - mac_data |= BIT(31); - ew32(FEXTNVM6, mac_data); - - /* Enable mPHY power gating for any link and speed */ - mac_data = er32(FEXTNVM8); - mac_data |= BIT(9); - ew32(FEXTNVM8, mac_data); - /* Enable the Dynamic Clock Gating in the DMA and MAC */ mac_data = er32(CTRL_EXT); mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN; ew32(CTRL_EXT, mac_data); - - /* No MAC DPG gating SLP_S0 in modern standby - * Switch the logic of the lanphypc to use PMC counter - */ - mac_data = er32(FEXTNVM5); - mac_data |= BIT(7); - ew32(FEXTNVM5, mac_data); } + /* Enable the Dynamic Power Gating in the MAC */ + mac_data = er32(FEXTNVM7); + mac_data |= BIT(22); + ew32(FEXTNVM7, mac_data); + + /* Don't wake from dynamic Power Gating with clock request */ + mac_data = er32(FEXTNVM12); + mac_data |= BIT(12); + ew32(FEXTNVM12, mac_data); + + /* Ungate PGCB clock */ + mac_data = er32(FEXTNVM9); + mac_data &= ~BIT(28); + ew32(FEXTNVM9, mac_data); + + /* Enable K1 off to enable mPHY Power Gating */ + mac_data = er32(FEXTNVM6); + mac_data |= BIT(31); + ew32(FEXTNVM6, mac_data); + + /* Enable mPHY power gating for any link and speed */ + mac_data = er32(FEXTNVM8); + mac_data |= BIT(9); + ew32(FEXTNVM8, mac_data); + + /* No MAC DPG gating SLP_S0 in modern standby + * Switch the logic of the lanphypc to use PMC counter + */ + mac_data = er32(FEXTNVM5); + mac_data |= BIT(7); + ew32(FEXTNVM5, mac_data); + /* Disable the time synchronization clock */ mac_data = er32(FEXTNVM7); mac_data |= BIT(31); @@ -6498,33 +6500,6 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter) } else { /* Request driver unconfigure the device from S0ix */ - /* Disable the Dynamic Power Gating in the MAC */ - mac_data = er32(FEXTNVM7); - mac_data &= 0xFFBFFFFF; - ew32(FEXTNVM7, mac_data); - - /* Disable mPHY power gating for any link and speed */ - mac_data = er32(FEXTNVM8); - mac_data &= ~BIT(9); - ew32(FEXTNVM8, mac_data); - - /* Disable K1 off */ - mac_data = er32(FEXTNVM6); - mac_data &= ~BIT(31); - ew32(FEXTNVM6, mac_data); - - /* Disable Ungate PGCB clock */ - mac_data = er32(FEXTNVM9); - mac_data |= BIT(28); - ew32(FEXTNVM9, mac_data); - - /* Cancel not waking from dynamic - * Power Gating with clock request - */ - mac_data = er32(FEXTNVM12); - mac_data &= ~BIT(12); - ew32(FEXTNVM12, mac_data); - /* Cancel disable disconnected cable conditioning * for Power Gating */ @@ -6537,13 +6512,6 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter) mac_data &= 0xFFF7FFFF; ew32(CTRL_EXT, mac_data); - /* Revert the lanphypc logic to use the internal Gbe counter - * and not the PMC counter - */ - mac_data = er32(FEXTNVM5); - mac_data &= 0xFFFFFF7F; - ew32(FEXTNVM5, mac_data); - /* Enable the periodic inband message, * Request PCIe clock in K1 page770_17[10:9] =01b */ @@ -6581,6 +6549,40 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter) mac_data &= ~BIT(31); mac_data |= BIT(0); ew32(FEXTNVM7, mac_data); + + /* Disable the Dynamic Power Gating in the MAC */ + mac_data = er32(FEXTNVM7); + mac_data &= 0xFFBFFFFF; + ew32(FEXTNVM7, mac_data); + + /* Disable mPHY power gating for any link and speed */ + mac_data = er32(FEXTNVM8); + mac_data &= ~BIT(9); + ew32(FEXTNVM8, mac_data); + + /* Disable K1 off */ + mac_data = er32(FEXTNVM6); + mac_data &= ~BIT(31); + ew32(FEXTNVM6, mac_data); + + /* Disable Ungate PGCB clock */ + mac_data = er32(FEXTNVM9); + mac_data |= BIT(28); + ew32(FEXTNVM9, mac_data); + + /* Cancel not waking from dynamic + * Power Gating with clock request + */ + mac_data = er32(FEXTNVM12); + mac_data &= ~BIT(12); + ew32(FEXTNVM12, mac_data); + + /* Revert the lanphypc logic to use the internal Gbe counter + * and not the PMC counter + */ + mac_data = er32(FEXTNVM5); + mac_data &= 0xFFFFFF7F; + ew32(FEXTNVM5, mac_data); } static int e1000e_pm_freeze(struct device *dev) @@ -6623,7 +6625,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct e1000_hw *hw = &adapter->hw; u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; - u16 smb_ctrl; /* Runtime suspend should only enable wakeup for link changes */ if (runtime) @@ -6672,8 +6673,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); - if (retval) - return retval; + if (retval) { + e_err("Failed to enable wakeup\n"); + goto skip_phy_configurations; + } } else { /* enable wakeup by the MAC */ ew32(WUFC, wufc); @@ -6694,26 +6697,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) * or broadcast. */ retval = e1000_enable_ulp_lpt_lp(hw, !runtime); - if (retval) - return retval; + if (retval) { + e_err("Failed to enable ULP\n"); + goto skip_phy_configurations; + } } - - /* Force SMBUS to allow WOL */ - /* Switching PHY interface always returns MDI error - * so disable retry mechanism to avoid wasting time - */ - e1000e_disable_phy_retry(hw); - - e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl); - smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS; - e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl); - - e1000e_enable_phy_retry(hw); - - /* Force SMBus mode in MAC */ - ctrl_ext = er32(CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, ctrl_ext); } /* Ensure that the appropriate bits are set in LPI_CTRL @@ -6744,6 +6732,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) hw->phy.ops.release(hw); } +skip_phy_configurations: /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ @@ -6968,13 +6957,13 @@ static int __e1000_resume(struct pci_dev *pdev) return 0; } -static __maybe_unused int e1000e_pm_prepare(struct device *dev) +static int e1000e_pm_prepare(struct device *dev) { return pm_runtime_suspended(dev) && pm_suspend_via_firmware(); } -static __maybe_unused int e1000e_pm_suspend(struct device *dev) +static int e1000e_pm_suspend(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -6986,18 +6975,16 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev) e1000e_pm_freeze(dev); rc = __e1000_shutdown(pdev, false); - if (rc) { - e1000e_pm_thaw(dev); - } else { + if (!rc) { /* Introduce S0ix implementation */ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS) e1000e_s0ix_entry_flow(adapter); } - return rc; + return 0; } -static __maybe_unused int e1000e_pm_resume(struct device *dev) +static int e1000e_pm_resume(struct device *dev) { struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -7031,7 +7018,7 @@ static __maybe_unused int e1000e_pm_runtime_idle(struct device *dev) return -EBUSY; } -static __maybe_unused int e1000e_pm_runtime_resume(struct device *dev) +static int e1000e_pm_runtime_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); @@ -7050,7 +7037,7 @@ static __maybe_unused int e1000e_pm_runtime_resume(struct device *dev) return rc; } -static __maybe_unused int e1000e_pm_runtime_suspend(struct device *dev) +static int e1000e_pm_runtime_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); struct net_device *netdev = pci_get_drvdata(pdev); @@ -7356,9 +7343,11 @@ static const struct net_device_ops e1000e_netdev_ops = { #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = e1000_netpoll, #endif - .ndo_set_features = e1000_set_features, - .ndo_fix_features = e1000_fix_features, + .ndo_set_features = e1000_set_features, + .ndo_fix_features = e1000_fix_features, .ndo_features_check = passthru_features_check, + .ndo_hwtstamp_get = e1000e_hwtstamp_get, + .ndo_hwtstamp_set = e1000e_hwtstamp_set, }; /** @@ -7751,8 +7740,8 @@ static void e1000_remove(struct pci_dev *pdev) * from being rescheduled. */ set_bit(__E1000_DOWN, &adapter->state); - del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); + timer_delete_sync(&adapter->watchdog_timer); + timer_delete_sync(&adapter->phy_info_timer); cancel_work_sync(&adapter->reset_task); cancel_work_sync(&adapter->watchdog_task); @@ -7914,10 +7903,10 @@ static const struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_adp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_adp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_adp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM19), board_pch_adp }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V19), board_pch_adp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_mtp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_mtp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_mtp }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_mtp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_mtp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_mtp }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_mtp }, @@ -7937,8 +7926,7 @@ static const struct pci_device_id e1000_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); -static const struct dev_pm_ops e1000_pm_ops = { -#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops e1000e_pm_ops = { .prepare = e1000e_pm_prepare, .suspend = e1000e_pm_suspend, .resume = e1000e_pm_resume, @@ -7946,9 +7934,8 @@ static const struct dev_pm_ops e1000_pm_ops = { .thaw = e1000e_pm_thaw, .poweroff = e1000e_pm_suspend, .restore = e1000e_pm_resume, -#endif - SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume, - e1000e_pm_runtime_idle) + RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume, + e1000e_pm_runtime_idle) }; /* PCI Device API Driver */ @@ -7957,9 +7944,7 @@ static struct pci_driver e1000_driver = { .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = e1000_remove, - .driver = { - .pm = &e1000_pm_ops, - }, + .driver.pm = pm_ptr(&e1000e_pm_ops), .shutdown = e1000_shutdown, .err_handler = &e1000_err_handler }; @@ -7991,7 +7976,6 @@ static void __exit e1000_exit_module(void) } module_exit(e1000_exit_module); -MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index bbcfd529399b..89d57dd911dc 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -124,7 +124,8 @@ static int e1000e_phc_get_syncdevicetime(ktime_t *device, sys_cycles = er32(PLTSTMPH); sys_cycles <<= 32; sys_cycles |= er32(PLTSTMPL); - *system = convert_art_to_tsc(sys_cycles); + system->cycles = sys_cycles; + system->cs_id = CSID_X86_ART; return 0; } |