diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_mac.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_mac.c | 344 |
1 files changed, 207 insertions, 137 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index bab556a47fcc..fa3dfafd2bb1 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -1,30 +1,7 @@ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2007 - 2018 Intel Corporation. */ +#include <linux/bitfield.h> #include <linux/if_ether.h> #include <linux/delay.h> #include <linux/pci.h> @@ -36,7 +13,7 @@ #include "igb.h" static s32 igb_set_default_fc(struct e1000_hw *hw); -static s32 igb_set_fc_watermarks(struct e1000_hw *hw); +static void igb_set_fc_watermarks(struct e1000_hw *hw); /** * igb_get_bus_info_pcie - Get PCIe bus information @@ -74,13 +51,12 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw) break; } - bus->width = (enum e1000_bus_width)((pcie_link_status & - PCI_EXP_LNKSTA_NLW) >> - PCI_EXP_LNKSTA_NLW_SHIFT); + bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW, + pcie_link_status); } reg = rd32(E1000_STATUS); - bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; + bus->func = FIELD_GET(E1000_STATUS_FUNC_MASK, reg); return 0; } @@ -96,10 +72,8 @@ void igb_clear_vfta(struct e1000_hw *hw) { u32 offset; - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - array_wr32(E1000_VFTA, offset, 0); - wrfl(); - } + for (offset = E1000_VLAN_FILTER_TBL_SIZE; offset--;) + hw->mac.ops.write_vfta(hw, offset, 0); } /** @@ -111,54 +85,14 @@ void igb_clear_vfta(struct e1000_hw *hw) * Writes value at the given offset in the register array which stores * the VLAN filter table. **/ -static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { + struct igb_adapter *adapter = hw->back; + array_wr32(E1000_VFTA, offset, value); wrfl(); -} - -/* Due to a hw errata, if the host tries to configure the VFTA register - * while performing queries from the BMC or DMA, then the VFTA in some - * cases won't be written. - */ - -/** - * igb_clear_vfta_i350 - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * Clears the register array which contains the VLAN filter table by - * setting all the values to 0. - **/ -void igb_clear_vfta_i350(struct e1000_hw *hw) -{ - u32 offset; - int i; - - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - for (i = 0; i < 10; i++) - array_wr32(E1000_VFTA, offset, 0); - wrfl(); - } -} - -/** - * igb_write_vfta_i350 - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: register offset in VLAN filter table - * @value: register value written to VLAN filter table - * - * Writes value at the given offset in the register array which stores - * the VLAN filter table. - **/ -static void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) -{ - int i; - - for (i = 0; i < 10; i++) - array_wr32(E1000_VFTA, offset, value); - - wrfl(); + adapter->shadow_vfta[offset] = value; } /** @@ -187,40 +121,156 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) } /** + * igb_find_vlvf_slot - find the VLAN id or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vlvf_bypass: skip VLVF if no match is found + * + * return the VLVF index where this VLAN id should be placed + * + **/ +static s32 igb_find_vlvf_slot(struct e1000_hw *hw, u32 vlan, bool vlvf_bypass) +{ + s32 regindex, first_empty_slot; + u32 bits; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* if vlvf_bypass is set we don't want to use an empty slot, we + * will simply bypass the VLVF if there are no entries present in the + * VLVF that contain our VLAN + */ + first_empty_slot = vlvf_bypass ? -E1000_ERR_NO_SPACE : 0; + + /* Search for the VLAN id in the VLVF entries. Save off the first empty + * slot found along the way. + * + * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1 + */ + for (regindex = E1000_VLVF_ARRAY_SIZE; --regindex > 0;) { + bits = rd32(E1000_VLVF(regindex)) & E1000_VLVF_VLANID_MASK; + if (bits == vlan) + return regindex; + if (!first_empty_slot && !bits) + first_empty_slot = regindex; + } + + return first_empty_slot ? : -E1000_ERR_NO_SPACE; +} + +/** * igb_vfta_set - enable or disable vlan in VLAN filter table * @hw: pointer to the HW structure - * @vid: VLAN id to add or remove - * @add: if true add filter, if false remove + * @vlan: VLAN id to add or remove + * @vind: VMDq output index that maps queue to VLAN id + * @vlan_on: if true add filter, if false remove + * @vlvf_bypass: skip VLVF if no match is found * * Sets or clears a bit in the VLAN filter table array based on VLAN id * and if we are adding or removing the filter **/ -s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add) +s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, u32 vind, + bool vlan_on, bool vlvf_bypass) { - u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK; - u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); - u32 vfta; struct igb_adapter *adapter = hw->back; - s32 ret_val = 0; + u32 regidx, vfta_delta, vfta, bits; + s32 vlvf_index; - vfta = adapter->shadow_vfta[index]; + if ((vlan > 4095) || (vind > 7)) + return -E1000_ERR_PARAM; - /* bit was set/cleared before we started */ - if ((!!(vfta & mask)) == add) { - ret_val = -E1000_ERR_CONFIG; - } else { - if (add) - vfta |= mask; - else - vfta &= ~mask; + /* this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if VT Mode is set + * We don't write the VFTA until we know the VLVF part succeeded. + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regidx = vlan / 32; + vfta_delta = BIT(vlan % 32); + vfta = adapter->shadow_vfta[regidx]; + + /* vfta_delta represents the difference between the current value + * of vfta and the value we want in the register. Since the diff + * is an XOR mask we can just update vfta using an XOR. + */ + vfta_delta &= vlan_on ? ~vfta : vfta; + vfta ^= vfta_delta; + + /* Part 2 + * If VT Mode is set + * Either vlan_on + * make sure the VLAN is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + if (!adapter->vfs_allocated_count) + goto vfta_update; + + vlvf_index = igb_find_vlvf_slot(hw, vlan, vlvf_bypass); + if (vlvf_index < 0) { + if (vlvf_bypass) + goto vfta_update; + return vlvf_index; } - if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354)) - igb_write_vfta_i350(hw, index, vfta); - else - igb_write_vfta(hw, index, vfta); - adapter->shadow_vfta[index] = vfta; - return ret_val; + bits = rd32(E1000_VLVF(vlvf_index)); + + /* set the pool bit */ + bits |= BIT(E1000_VLVF_POOLSEL_SHIFT + vind); + if (vlan_on) + goto vlvf_update; + + /* clear the pool bit */ + bits ^= BIT(E1000_VLVF_POOLSEL_SHIFT + vind); + + if (!(bits & E1000_VLVF_POOLSEL_MASK)) { + /* Clear VFTA first, then disable VLVF. Otherwise + * we run the risk of stray packets leaking into + * the PF via the default pool + */ + if (vfta_delta) + hw->mac.ops.write_vfta(hw, regidx, vfta); + + /* disable VLVF and clear remaining bit from pool */ + wr32(E1000_VLVF(vlvf_index), 0); + + return 0; + } + + /* If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + vfta_delta = 0; + +vlvf_update: + /* record pool change and enable VLAN ID if not already enabled */ + wr32(E1000_VLVF(vlvf_index), bits | vlan | E1000_VLVF_VLANID_ENABLE); + +vfta_update: + /* bit was set/cleared before we started */ + if (vfta_delta) + hw->mac.ops.write_vfta(hw, regidx, vfta); + + return 0; } /** @@ -358,7 +408,7 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) mta = array_rd32(E1000_MTA, hash_reg); - mta |= (1 << hash_bit); + mta |= BIT(hash_bit); array_wr32(E1000_MTA, hash_reg, mta); wrfl(); @@ -376,7 +426,7 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value, hash_mask; - u8 bit_shift = 0; + u8 bit_shift = 1; /* Register count multiplied by bits per register */ hash_mask = (hw->mac.mta_reg_count * 32) - 1; @@ -384,7 +434,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) /* For a mc_filter_type of 0, bit_shift is the number of left-shifts * where 0xFF would still fall within the hash mask. */ - while (hash_mask >> bit_shift != 0xFF) + while (hash_mask >> bit_shift != 0xFF && bit_shift < 4) bit_shift++; /* The portion of the address that is used for the hash table @@ -434,6 +484,35 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) } /** + * igb_i21x_hw_doublecheck - double checks potential HW issue in i21X + * @hw: pointer to the HW structure + * + * Checks if multicast array is wrote correctly + * If not then rewrites again to register + **/ +static void igb_i21x_hw_doublecheck(struct e1000_hw *hw) +{ + int failed_cnt = 3; + bool is_failed; + int i; + + do { + is_failed = false; + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) { + if (array_rd32(E1000_MTA, i) != hw->mac.mta_shadow[i]) { + is_failed = true; + array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]); + wrfl(); + } + } + if (is_failed && --failed_cnt <= 0) { + hw_dbg("Failed to update MTA_REGISTER, too many retries"); + break; + } + } while (is_failed); +} + +/** * igb_update_mc_addr_list - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program @@ -443,7 +522,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) * The caller must have a packed mc_addr_list of multicast addresses. **/ void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count) + u8 *mc_addr_list, u32 mc_addr_count) { u32 hash_value, hash_bit, hash_reg; int i; @@ -458,7 +537,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); hash_bit = hash_value & 0x1F; - hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + hw->mac.mta_shadow[hash_reg] |= BIT(hash_bit); mc_addr_list += (ETH_ALEN); } @@ -466,6 +545,8 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]); wrfl(); + if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) + igb_i21x_hw_doublecheck(hw); } /** @@ -638,7 +719,7 @@ s32 igb_setup_link(struct e1000_hw *hw) wr32(E1000_FCTTV, hw->fc.pause_time); - ret_val = igb_set_fc_watermarks(hw); + igb_set_fc_watermarks(hw); out: @@ -674,9 +755,8 @@ void igb_config_collision_dist(struct e1000_hw *hw) * flow control XON frame transmission is enabled, then set XON frame * tansmission as well. **/ -static s32 igb_set_fc_watermarks(struct e1000_hw *hw) +static void igb_set_fc_watermarks(struct e1000_hw *hw) { - s32 ret_val = 0; u32 fcrtl = 0, fcrth = 0; /* Set the flow control receive threshold registers. Normally, @@ -698,8 +778,6 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) } wr32(E1000_FCRTL, fcrtl); wr32(E1000_FCRTH, fcrth); - - return ret_val; } /** @@ -712,6 +790,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) static s32 igb_set_default_fc(struct e1000_hw *hw) { s32 ret_val = 0; + u16 lan_offset; u16 nvm_data; /* Read and store word 0x0F of the EEPROM. This word contains bits @@ -722,8 +801,13 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); + if (hw->mac.type == e1000_i350) + lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func); + else + lan_offset = 0; + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG + lan_offset, + 1, &nvm_data); if (ret_val) { hw_dbg("NVM Read Error\n"); goto out; @@ -731,8 +815,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) hw->fc.requested_mode = e1000_fc_none; - else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == - NVM_WORD0F_ASM_DIR) + else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR) hw->fc.requested_mode = e1000_fc_tx_pause; else hw->fc.requested_mode = e1000_fc_full; @@ -771,7 +854,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 1: Rx flow control is enabled (we can receive pause * frames but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). + * but we do not receive pause frames). * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ @@ -859,8 +942,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg("Copper PHY and Auto Neg " - "has not completed.\n"); + hw_dbg("Copper PHY and Auto Neg has not completed.\n"); goto out; } @@ -922,11 +1004,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - hw_dbg("Flow Control = FULL.\r\n"); + hw_dbg("Flow Control = FULL.\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = " - "RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } } /* For receiving PAUSE frames ONLY. @@ -941,7 +1022,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. * @@ -955,7 +1036,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be * disabled. However, we want to consider that we could @@ -981,10 +1062,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (hw->fc.requested_mode == e1000_fc_tx_pause) || (hw->fc.strict_ieee)) { hw->fc.current_mode = e1000_fc_none; - hw_dbg("Flow Control = NONE.\r\n"); + hw_dbg("Flow Control = NONE.\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\n"); } /* Now we need to do one last check... If we auto- @@ -1171,17 +1252,6 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, hw_dbg("Half Duplex\n"); } - /* Check if it is an I354 2.5Gb backplane connection. */ - if (hw->mac.type == e1000_i354) { - if ((status & E1000_STATUS_2P5_SKU) && - !(status & E1000_STATUS_2P5_SKU_OVER)) { - *speed = SPEED_2500; - *duplex = FULL_DUPLEX; - hw_dbg("2500 Mbs, "); - hw_dbg("Full Duplex\n"); - } - } - return 0; } @@ -1270,7 +1340,7 @@ s32 igb_get_auto_rd_done(struct e1000_hw *hw) while (i < AUTO_READ_DONE_TIMEOUT) { if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD) break; - msleep(1); + usleep_range(1000, 2000); i++; } @@ -1303,7 +1373,7 @@ static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data) } if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { - switch(hw->phy.media_type) { + switch (hw->phy.media_type) { case e1000_media_type_internal_serdes: *data = ID_LED_DEFAULT_82575_SERDES; break; |