diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_phy.c | 301 |
1 files changed, 145 insertions, 156 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c index 38e43e6fc1c7..6c4d204aecfa 100644 --- a/drivers/net/ethernet/intel/igc/igc_phy.c +++ b/drivers/net/ethernet/intel/igc/igc_phy.c @@ -1,12 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018 Intel Corporation */ +#include <linux/bitfield.h> #include "igc_phy.h" -/* forward declaration */ -static s32 igc_phy_setup_autoneg(struct igc_hw *hw); -static s32 igc_wait_autoneg(struct igc_hw *hw); - /** * igc_check_reset_block - Check if PHY reset is blocked * @hw: pointer to the HW structure @@ -133,11 +130,7 @@ void igc_power_down_phy_copper(struct igc_hw *hw) /* The PHY will retain its settings across a power down/up cycle */ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; - - /* Temporary workaround - should be removed when PHY will implement - * IEEE registers as properly - */ - /* hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);*/ + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); usleep_range(1000, 2000); } @@ -145,32 +138,14 @@ void igc_power_down_phy_copper(struct igc_hw *hw) * igc_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * - * Success returns 0, Failure returns 1 - * * A downshift is detected by querying the PHY link health. */ -s32 igc_check_downshift(struct igc_hw *hw) +void igc_check_downshift(struct igc_hw *hw) { struct igc_phy_info *phy = &hw->phy; - u16 phy_data, offset, mask; - s32 ret_val; - switch (phy->type) { - case igc_phy_i225: - default: - /* speed downshift not supported */ - phy->speed_downgraded = false; - ret_val = 0; - goto out; - } - - ret_val = phy->ops.read_reg(hw, offset, &phy_data); - - if (!ret_val) - phy->speed_downgraded = (phy_data & mask) ? true : false; - -out: - return ret_val; + /* speed downshift not supported */ + phy->speed_downgraded = false; } /** @@ -185,6 +160,7 @@ out: s32 igc_phy_hw_reset(struct igc_hw *hw) { struct igc_phy_info *phy = &hw->phy; + u32 phpm = 0, timeout = 10000; s32 ret_val; u32 ctrl; @@ -198,6 +174,8 @@ s32 igc_phy_hw_reset(struct igc_hw *hw) if (ret_val) goto out; + phpm = rd32(IGC_I225_PHPM); + ctrl = rd32(IGC_CTRL); wr32(IGC_CTRL, ctrl | IGC_CTRL_PHY_RST); wrfl(); @@ -207,109 +185,26 @@ s32 igc_phy_hw_reset(struct igc_hw *hw) wr32(IGC_CTRL, ctrl); wrfl(); - usleep_range(1500, 2000); - - phy->ops.release(hw); - -out: - return ret_val; -} - -/** - * igc_copper_link_autoneg - Setup/Enable autoneg for copper link - * @hw: pointer to the HW structure - * - * Performs initial bounds checking on autoneg advertisement parameter, then - * configure to advertise the full capability. Setup the PHY to autoneg - * and restart the negotiation process between the link partner. If - * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. - */ -static s32 igc_copper_link_autoneg(struct igc_hw *hw) -{ - struct igc_phy_info *phy = &hw->phy; - u16 phy_ctrl; - s32 ret_val; - - /* Perform some bounds checking on the autoneg advertisement - * parameter. - */ - phy->autoneg_advertised &= phy->autoneg_mask; + /* SW should guarantee 100us for the completion of the PHY reset */ + usleep_range(100, 150); + do { + phpm = rd32(IGC_I225_PHPM); + timeout--; + udelay(1); + } while (!(phpm & IGC_PHY_RST_COMP) && timeout); - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (phy->autoneg_advertised == 0) - phy->autoneg_advertised = phy->autoneg_mask; + if (!timeout) + hw_dbg("Timeout is expired after a phy reset\n"); - hw_dbg("Reconfiguring auto-neg advertisement params\n"); - ret_val = igc_phy_setup_autoneg(hw); - if (ret_val) { - hw_dbg("Error Setting up Auto-Negotiation\n"); - goto out; - } - hw_dbg("Restarting Auto-Neg\n"); + usleep_range(100, 150); - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); - if (ret_val) - goto out; - - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); - if (ret_val) - goto out; - - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (phy->autoneg_wait_to_complete) { - ret_val = igc_wait_autoneg(hw); - if (ret_val) { - hw_dbg("Error while waiting for autoneg to complete\n"); - goto out; - } - } - - hw->mac.get_link_status = true; + phy->ops.release(hw); out: return ret_val; } /** - * igc_wait_autoneg - Wait for auto-neg completion - * @hw: pointer to the HW structure - * - * Waits for auto-negotiation to complete or for the auto-negotiation time - * limit to expire, which ever happens first. - */ -static s32 igc_wait_autoneg(struct igc_hw *hw) -{ - u16 i, phy_status; - s32 ret_val = 0; - - /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ - for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) - break; - msleep(100); - } - - /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation - * has completed. - */ - return ret_val; -} - -/** * igc_phy_setup_autoneg - Configure PHY for auto-negotiation * @hw: pointer to the HW structure * @@ -341,12 +236,11 @@ static s32 igc_phy_setup_autoneg(struct igc_hw *hw) return ret_val; } - if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && - hw->phy.id == I225_I_PHY_ID) { + if (phy->autoneg_mask & ADVERTISE_2500_FULL) { /* Read the MULTI GBT AN Control Register - reg 7.32 */ ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK << MMD_DEVADDR_SHIFT) | - ANEG_MULTIGBT_AN_CTRL, + IGC_ANEG_MULTIGBT_AN_CTRL, &aneg_multigbt_an_ctrl); if (ret_val) @@ -482,18 +376,111 @@ static s32 igc_phy_setup_autoneg(struct igc_hw *hw) ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - if ((phy->autoneg_mask & ADVERTISE_2500_FULL) && - hw->phy.id == I225_I_PHY_ID) + if (phy->autoneg_mask & ADVERTISE_2500_FULL) ret_val = phy->ops.write_reg(hw, (STANDARD_AN_REG_MASK << MMD_DEVADDR_SHIFT) | - ANEG_MULTIGBT_AN_CTRL, + IGC_ANEG_MULTIGBT_AN_CTRL, aneg_multigbt_an_ctrl); return ret_val; } /** + * igc_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + */ +static s32 igc_wait_autoneg(struct igc_hw *hw) +{ + u16 i, phy_status; + s32 ret_val = 0; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msleep(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * igc_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + */ +static s32 igc_copper_link_autoneg(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 phy_ctrl; + s32 ret_val; + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (phy->autoneg_advertised == 0) + phy->autoneg_advertised = phy->autoneg_mask; + + hw_dbg("Reconfiguring auto-neg advertisement params\n"); + ret_val = igc_phy_setup_autoneg(hw); + if (ret_val) { + hw_dbg("Error Setting up Auto-Negotiation\n"); + goto out; + } + hw_dbg("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + goto out; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + goto out; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = igc_wait_autoneg(hw); + if (ret_val) { + hw_dbg("Error while waiting for autoneg to complete\n"); + goto out; + } + } + + hw->mac.get_link_status = true; + +out: + return ret_val; +} + +/** * igc_setup_copper_link - Configure copper link settings * @hw: pointer to the HW structure * @@ -507,24 +494,12 @@ s32 igc_setup_copper_link(struct igc_hw *hw) s32 ret_val = 0; bool link; - if (hw->mac.autoneg) { - /* Setup autoneg and flow control advertisement and perform - * autonegotiation. - */ - ret_val = igc_copper_link_autoneg(hw); - if (ret_val) - goto out; - } else { - /* PHY will be set to 10H, 10F, 100H or 100F - * depending on user settings. - */ - hw_dbg("Forcing Speed and Duplex\n"); - ret_val = hw->phy.ops.force_speed_duplex(hw); - if (ret_val) { - hw_dbg("Error Forcing Speed and Duplex\n"); - goto out; - } - } + /* Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = igc_copper_link_autoneg(hw); + if (ret_val) + goto out; /* Check link status. Wait up to 100 microseconds for link to become * valid. @@ -581,7 +556,7 @@ static s32 igc_read_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 *data) * the lower time out */ for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) { - usleep_range(500, 1000); + udelay(50); mdic = rd32(IGC_MDIC); if (mdic & IGC_MDIC_READY) break; @@ -638,7 +613,7 @@ static s32 igc_write_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 data) * the lower time out */ for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) { - usleep_range(500, 1000); + udelay(50); mdic = rd32(IGC_MDIC); if (mdic & IGC_MDIC_READY) break; @@ -736,7 +711,7 @@ static s32 igc_write_xmdio_reg(struct igc_hw *hw, u16 addr, */ s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data) { - u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT; + u8 dev_addr = FIELD_GET(GPY_MMD_MASK, offset); s32 ret_val; offset = offset & GPY_REG_MASK; @@ -746,8 +721,6 @@ s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data) if (ret_val) return ret_val; ret_val = igc_write_phy_reg_mdic(hw, offset, data); - if (ret_val) - return ret_val; hw->phy.ops.release(hw); } else { ret_val = igc_write_xmdio_reg(hw, (u16)offset, dev_addr, @@ -769,7 +742,7 @@ s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data) */ s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data) { - u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT; + u8 dev_addr = FIELD_GET(GPY_MMD_MASK, offset); s32 ret_val; offset = offset & GPY_REG_MASK; @@ -779,8 +752,6 @@ s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data) if (ret_val) return ret_val; ret_val = igc_read_phy_reg_mdic(hw, offset, data); - if (ret_val) - return ret_val; hw->phy.ops.release(hw); } else { ret_val = igc_read_xmdio_reg(hw, (u16)offset, dev_addr, @@ -789,3 +760,21 @@ s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data) return ret_val; } + +/** + * igc_read_phy_fw_version - Read gPHY firmware version + * @hw: pointer to the HW structure + */ +u16 igc_read_phy_fw_version(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 gphy_version = 0; + u16 ret_val; + + /* NVM image version is reported as firmware version for i225 device */ + ret_val = phy->ops.read_reg(hw, IGC_GPHY_VERSION, &gphy_version); + if (ret_val) + hw_dbg("igc_phy: read wrong gphy version\n"); + + return gphy_version; +} |