diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 41 |
1 files changed, 23 insertions, 18 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index b3509b617a4e..e0cf0722b58c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -600,8 +600,10 @@ static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); if (rc) return rc; + if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) - return IXGBE_ERR_OVERTEMP; + return -EIO; + return 0; } @@ -2367,18 +2369,18 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, * @hw: pointer to hardware structure * @lsc: pointer to boolean flag which indicates whether external Base T * PHY interrupt is lsc + * @is_overtemp: indicate whether an overtemp event encountered * * Determime if external Base T PHY interrupt cause is high temperature * failure alarm or link status change. - * - * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature - * failure alarm, else return PHY access status. **/ -static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) +static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc, + bool *is_overtemp) { u32 status; u16 reg; + *is_overtemp = false; *lsc = false; /* Vendor alarm triggered */ @@ -2410,7 +2412,8 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { /* power down the PHY in case the PHY FW didn't already */ ixgbe_set_copper_phy_power(hw, false); - return IXGBE_ERR_OVERTEMP; + *is_overtemp = true; + return -EIO; } if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { /* device fault alarm triggered */ @@ -2424,7 +2427,8 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { /* power down the PHY in case the PHY FW didn't */ ixgbe_set_copper_phy_power(hw, false); - return IXGBE_ERR_OVERTEMP; + *is_overtemp = true; + return -EIO; } } @@ -2460,12 +2464,12 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) **/ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) { + bool lsc, overtemp; u32 status; u16 reg; - bool lsc; /* Clear interrupt flags */ - status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, &overtemp); /* Enable link status change alarm */ @@ -2544,21 +2548,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) /** * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt * @hw: pointer to hardware structure + * @is_overtemp: indicate whether an overtemp event encountered * * Handle external Base T PHY interrupt. If high temperature * failure alarm then return error, else if link status change * then setup internal/external PHY link - * - * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature - * failure alarm, else return PHY access status. **/ -static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) +static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw, + bool *is_overtemp) { struct ixgbe_phy_info *phy = &hw->phy; bool lsc; u32 status; - status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, is_overtemp); if (status) return status; @@ -3185,21 +3188,23 @@ static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) /** * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp * @hw: pointer to hardware structure + * + * Return true when an overtemp event detected, otherwise false. */ -static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) +static bool ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) { u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; s32 rc; rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); if (rc) - return rc; + return false; if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { ixgbe_shutdown_fw_phy(hw); - return IXGBE_ERR_OVERTEMP; + return true; } - return 0; + return false; } /** |