diff options
Diffstat (limited to 'drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c')
| -rw-r--r-- | drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c | 118 |
1 files changed, 101 insertions, 17 deletions
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c index da079073a6c6..3426f6fa2b57 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c @@ -1,21 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 1999 - 2010 Intel Corporation. * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. * * This code was derived from the Intel e1000e Linux driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ #include "pch_gbe.h" @@ -74,6 +62,15 @@ #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ +/* AR8031 PHY Debug Registers */ +#define PHY_AR803X_ID 0x00001374 +#define PHY_AR8031_DBG_OFF 0x1D +#define PHY_AR8031_DBG_DAT 0x1E +#define PHY_AR8031_SERDES 0x05 +#define PHY_AR8031_HIBERNATE 0x0B +#define PHY_AR8031_SERDES_TX_CLK_DLY 0x0100 /* TX clock delay of 2.0ns */ +#define PHY_AR8031_PS_HIB_EN 0x8000 /* Hibernate enable */ + /* Phy Id Register (word 2) */ #define PHY_REVISION_MASK 0x000F @@ -176,7 +173,7 @@ s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data) * pch_gbe_phy_sw_reset - PHY software reset * @hw: Pointer to the HW structure */ -void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw) +static void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw) { u16 phy_ctrl; @@ -249,6 +246,51 @@ void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw) } /** + * pch_gbe_phy_tx_clk_delay - Setup TX clock delay via the PHY + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + * -EINVAL: Invalid argument. + */ +static int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw) +{ + /* The RGMII interface requires a ~2ns TX clock delay. This is typically + * done in layout with a longer trace or via PHY strapping, but can also + * be done via PHY configuration registers. + */ + struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw); + u16 mii_reg; + int ret = 0; + + switch (hw->phy.id) { + case PHY_AR803X_ID: + netdev_dbg(adapter->netdev, + "Configuring AR803X PHY for 2ns TX clock delay\n"); + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_OFF, &mii_reg); + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF, + PHY_AR8031_SERDES); + if (ret) + break; + + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg); + mii_reg |= PHY_AR8031_SERDES_TX_CLK_DLY; + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT, + mii_reg); + break; + default: + netdev_err(adapter->netdev, + "Unknown PHY (%x), could not set TX clock delay\n", + hw->phy.id); + return -EINVAL; + } + + if (ret) + netdev_err(adapter->netdev, + "Could not configure tx clock delay for PHY\n"); + return ret; +} + +/** * pch_gbe_phy_init_setting - PHY initial setting * @hw: Pointer to the HW structure */ @@ -259,9 +301,7 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw) int ret; u16 mii_reg; - ret = mii_ethtool_gset(&adapter->mii, &cmd); - if (ret) - netdev_err(adapter->netdev, "Error: mii_ethtool_gset\n"); + mii_ethtool_gset(&adapter->mii, &cmd); ethtool_cmd_speed_set(&cmd, hw->mac.link_speed); cmd.duplex = hw->mac.link_duplex; @@ -277,4 +317,48 @@ void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw) pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg); mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX; pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg); + + /* Setup a TX clock delay on certain platforms */ + if (adapter->pdata && adapter->pdata->phy_tx_clk_delay) + pch_gbe_phy_tx_clk_delay(hw); +} + +/** + * pch_gbe_phy_disable_hibernate - Disable the PHY low power state + * @hw: Pointer to the HW structure + * Returns + * 0: Successful. + * -EINVAL: Invalid argument. + */ +int pch_gbe_phy_disable_hibernate(struct pch_gbe_hw *hw) +{ + struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw); + u16 mii_reg; + int ret = 0; + + switch (hw->phy.id) { + case PHY_AR803X_ID: + netdev_dbg(adapter->netdev, + "Disabling hibernation for AR803X PHY\n"); + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_OFF, + PHY_AR8031_HIBERNATE); + if (ret) + break; + + pch_gbe_phy_read_reg_miic(hw, PHY_AR8031_DBG_DAT, &mii_reg); + mii_reg &= ~PHY_AR8031_PS_HIB_EN; + ret = pch_gbe_phy_write_reg_miic(hw, PHY_AR8031_DBG_DAT, + mii_reg); + break; + default: + netdev_err(adapter->netdev, + "Unknown PHY (%x), could not disable hibernation\n", + hw->phy.id); + return -EINVAL; + } + + if (ret) + netdev_err(adapter->netdev, + "Could not disable PHY hibernation\n"); + return ret; } |