diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 121 |
1 files changed, 105 insertions, 16 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 5583f0b055ec..907fe2e927f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -3,12 +3,14 @@ config STMMAC_ETH tristate "STMicroelectronics Multi-Gigabit Ethernet driver" depends on HAS_IOMEM && HAS_DMA depends on PTP_1588_CLOCK_OPTIONAL + depends on ETHTOOL_NETLINK select MII select PCS_XPCS select PAGE_POOL select PHYLINK select CRC32 select RESET_CONTROLLER + select NET_DEVLINK help This is the driver for the Ethernet IPs built around a Synopsys IP Core. @@ -66,6 +68,15 @@ config DWMAC_ANARION This selects the Anarion SoC glue layer support for the stmmac driver. +config DWMAC_EIC7700 + tristate "Support for Eswin eic7700 ethernet driver" + depends on OF && HAS_DMA && ARCH_ESWIN || COMPILE_TEST + help + This driver supports the Eswin EIC7700 Ethernet controller, + which integrates Synopsys DesignWare QoS features. It enables + high-speed networking with DMA acceleration and is optimized + for embedded systems. + config DWMAC_INGENIC tristate "Ingenic MAC support" default MACH_INGENIC @@ -121,17 +132,6 @@ config DWMAC_MESON the stmmac device driver. This driver is used for Meson6, Meson8, Meson8b and GXBB SoCs. -config DWMAC_OXNAS - tristate "Oxford Semiconductor OXNAS dwmac support" - default ARCH_OXNAS - depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST) - select MFD_SYSCON - help - Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs. - - This selects the Oxford Semiconductor OXNASSoC glue layer support for - the stmmac device driver. This driver is used for OX820. - config DWMAC_QCOM_ETHQOS tristate "Qualcomm ETHQOS support" default ARCH_QCOM @@ -142,6 +142,19 @@ config DWMAC_QCOM_ETHQOS This selects the Qualcomm ETHQOS glue layer support for the stmmac device driver. +config DWMAC_RENESAS_GBETH + tristate "Renesas RZ/V2H(P) GBETH and RZ/T2H, RZ/N2H GMAC support" + default ARCH_RENESAS + depends on OF && (ARCH_RENESAS || COMPILE_TEST) + select PCS_RZN1_MIIC + help + Support for Gigabit Ethernet Interface (GBETH)/ Ethernet MAC (GMAC) + on Renesas SoCs. + + This selects Renesas SoC glue layer support for the stmmac device + driver. This driver is used for the RZ/V2H(P) family, RZ/T2H and + RZ/N2H SoCs. + config DWMAC_ROCKCHIP tristate "Rockchip dwmac support" default ARCH_ROCKCHIP @@ -153,6 +166,30 @@ config DWMAC_ROCKCHIP This selects the Rockchip RK3288 SoC glue layer support for the stmmac device driver. +config DWMAC_RZN1 + tristate "Renesas RZ/N1 dwmac support" + default ARCH_RZN1 + depends on OF && (ARCH_RZN1 || COMPILE_TEST) + select PCS_RZN1_MIIC + help + Support for Ethernet controller on Renesas RZ/N1 SoC family. + + This selects the Renesas RZ/N1 SoC glue layer support for + the stmmac device driver. This support can make use of a custom MII + converter PCS device. + +config DWMAC_S32 + tristate "NXP S32G/S32R GMAC support" + default ARCH_S32 + depends on OF && (ARCH_S32 || COMPILE_TEST) + help + Support for ethernet controller on NXP S32CC SOCs. + + This selects NXP SoC glue layer support for the stmmac + device driver. This driver is used for the S32CC series + SOCs GMAC ethernet controller, ie. S32G2xx, S32G3xx and + S32R45. + config DWMAC_SOCFPGA tristate "SOCFPGA dwmac support" default ARCH_INTEL_SOCFPGA @@ -168,6 +205,17 @@ config DWMAC_SOCFPGA for the stmmac device driver. This driver is used for arria5 and cyclone5 FPGA SoCs. +config DWMAC_SOPHGO + tristate "Sophgo dwmac support" + depends on OF && (ARCH_SOPHGO || COMPILE_TEST) + default m if ARCH_SOPHGO + help + Support for ethernet controllers on Sophgo RISC-V SoCs + + This selects the Sophgo SoC specific glue layer support + for the stmmac device driver. This driver is used for the + ethernet controllers on various Sophgo SoCs. + config DWMAC_STARFIVE tristate "StarFive dwmac support" depends on OF && (ARCH_STARFIVE || COMPILE_TEST) @@ -176,9 +224,9 @@ config DWMAC_STARFIVE help Support for ethernet controllers on StarFive RISC-V SoCs - This selects the StarFive platform specific glue layer support for - the stmmac device driver. This driver is used for StarFive JH7110 - ethernet controller. + This selects the StarFive platform specific glue layer support + for the stmmac device driver. This driver is used for the + StarFive JH7100 and JH7110 ethernet controllers. config DWMAC_STI tristate "STi GMAC support" @@ -227,6 +275,28 @@ config DWMAC_SUN8I stmmac device driver. This driver is used for H3/A83T/A64 EMAC ethernet controller. +config DWMAC_SUN55I + tristate "Allwinner sun55i GMAC200 support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + select MDIO_BUS_MUX + help + Support for Allwinner A523/T527 GMAC200 ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for A523/T527 + GMAC200 ethernet controller. + +config DWMAC_THEAD + tristate "T-HEAD dwmac support" + depends on OF && (ARCH_THEAD || COMPILE_TEST) + help + Support for ethernet controllers on T-HEAD RISC-V SoCs + + This selects the T-HEAD platform specific glue layer support for + the stmmac device driver. This driver is used for T-HEAD TH1520 + ethernet controller. + config DWMAC_IMX8 tristate "NXP IMX8 DWMAC support" default ARCH_MXC @@ -250,6 +320,17 @@ config DWMAC_INTEL_PLAT the stmmac device driver. This driver is used for the Intel Keem Bay SoC. +config DWMAC_LOONGSON1 + tristate "Loongson1 GMAC support" + default MACH_LOONGSON32 + depends on OF && (MACH_LOONGSON32 || COMPILE_TEST) + help + Support for ethernet controller on Loongson1 SoC. + + This selects Loongson1 SoC glue layer support for the stmmac + device driver. This driver is used for Loongson1-based boards + like Loongson LS1B/LS1C. + config DWMAC_TEGRA tristate "NVIDIA Tegra MGBE support" depends on ARCH_TEGRA || COMPILE_TEST @@ -268,11 +349,17 @@ config DWMAC_VISCONTI endif +config STMMAC_LIBPCI + tristate + help + This option enables the PCI bus helpers for the stmmac driver. + config DWMAC_INTEL tristate "Intel GMAC support" default X86 depends on X86 && STMMAC_ETH && PCI depends on COMMON_CLK + depends on ACPI help This selects the Intel platform specific bus support for the stmmac driver. This driver is used for Intel Quark/EHL/TGL. @@ -280,16 +367,18 @@ config DWMAC_INTEL config DWMAC_LOONGSON tristate "Loongson PCI DWMAC support" default MACH_LOONGSON64 - depends on STMMAC_ETH && PCI + depends on (MACH_LOONGSON64 || COMPILE_TEST) && PCI depends on COMMON_CLK + select STMMAC_LIBPCI help This selects the LOONGSON PCI bus support for the stmmac driver, Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. config STMMAC_PCI tristate "STMMAC PCI bus support" - depends on STMMAC_ETH && PCI + depends on PCI depends on COMMON_CLK + select STMMAC_LIBPCI help This selects the platform specific bus support for the stmmac driver. This driver was tested on XLINX XC2V3000 FF1152AMT0221 |