diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/ll_temac.h')
| -rw-r--r-- | drivers/net/ethernet/xilinx/ll_temac.h | 224 |
1 files changed, 128 insertions, 96 deletions
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h index 7d06e3e1abac..90d122d5475c 100644 --- a/drivers/net/ethernet/xilinx/ll_temac.h +++ b/drivers/net/ethernet/xilinx/ll_temac.h @@ -1,9 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef XILINX_LL_TEMAC_H #define XILINX_LL_TEMAC_H #include <linux/netdevice.h> #include <linux/of.h> +#include <linux/platform_device.h> #include <linux/spinlock.h> #ifdef CONFIG_PPC_DCR @@ -20,36 +22,45 @@ /* Configuration options */ /* Accept all incoming packets. - * This option defaults to disabled (cleared) */ + * This option defaults to disabled (cleared) + */ #define XTE_OPTION_PROMISC (1 << 0) /* Jumbo frame support for Tx & Rx. - * This option defaults to disabled (cleared) */ + * This option defaults to disabled (cleared) + */ #define XTE_OPTION_JUMBO (1 << 1) /* VLAN Rx & Tx frame support. - * This option defaults to disabled (cleared) */ + * This option defaults to disabled (cleared) + */ #define XTE_OPTION_VLAN (1 << 2) /* Enable recognition of flow control frames on Rx - * This option defaults to enabled (set) */ + * This option defaults to enabled (set) + */ #define XTE_OPTION_FLOW_CONTROL (1 << 4) /* Strip FCS and PAD from incoming frames. * Note: PAD from VLAN frames is not stripped. - * This option defaults to disabled (set) */ + * This option defaults to disabled (set) + */ #define XTE_OPTION_FCS_STRIP (1 << 5) /* Generate FCS field and add PAD automatically for outgoing frames. - * This option defaults to enabled (set) */ + * This option defaults to enabled (set) + */ #define XTE_OPTION_FCS_INSERT (1 << 6) /* Enable Length/Type error checking for incoming frames. When this option is -set, the MAC will filter frames that have a mismatched type/length field -and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these -types of frames are encountered. When this option is cleared, the MAC will -allow these types of frames to be received. -This option defaults to enabled (set) */ + * set, the MAC will filter frames that have a mismatched type/length field + * and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these + * types of frames are encountered. When this option is cleared, the MAC will + * allow these types of frames to be received. + * This option defaults to enabled (set) + */ #define XTE_OPTION_LENTYPE_ERR (1 << 7) /* Enable the transmitter. - * This option defaults to enabled (set) */ + * This option defaults to enabled (set) + */ #define XTE_OPTION_TXEN (1 << 11) /* Enable the receiver -* This option defaults to enabled (set) */ + * This option defaults to enabled (set) + */ #define XTE_OPTION_RXEN (1 << 12) /* Default options set when device is initialized or reset */ @@ -67,18 +78,18 @@ This option defaults to enabled (set) */ #define TX_TAILDESC_PTR 0x04 /* rw */ #define TX_CHNL_CTRL 0x05 /* rw */ /* - 0:7 24:31 IRQTimeout - 8:15 16:23 IRQCount - 16:20 11:15 Reserved - 21 10 0 - 22 9 UseIntOnEnd - 23 8 LdIRQCnt - 24 7 IRQEn - 25:28 3:6 Reserved - 29 2 IrqErrEn - 30 1 IrqDlyEn - 31 0 IrqCoalEn -*/ + * 0:7 24:31 IRQTimeout + * 8:15 16:23 IRQCount + * 16:20 11:15 Reserved + * 21 10 0 + * 22 9 UseIntOnEnd + * 23 8 LdIRQCnt + * 24 7 IRQEn + * 25:28 3:6 Reserved + * 29 2 IrqErrEn + * 30 1 IrqDlyEn + * 31 0 IrqCoalEn + */ #define CHNL_CTRL_IRQ_IOE (1 << 9) #define CHNL_CTRL_IRQ_EN (1 << 7) #define CHNL_CTRL_IRQ_ERR_EN (1 << 2) @@ -86,35 +97,35 @@ This option defaults to enabled (set) */ #define CHNL_CTRL_IRQ_COAL_EN (1 << 0) #define TX_IRQ_REG 0x06 /* rw */ /* - 0:7 24:31 DltTmrValue - 8:15 16:23 ClscCntrValue - 16:17 14:15 Reserved - 18:21 10:13 ClscCnt - 22:23 8:9 DlyCnt - 24:28 3::7 Reserved - 29 2 ErrIrq - 30 1 DlyIrq - 31 0 CoalIrq + * 0:7 24:31 DltTmrValue + * 8:15 16:23 ClscCntrValue + * 16:17 14:15 Reserved + * 18:21 10:13 ClscCnt + * 22:23 8:9 DlyCnt + * 24:28 3::7 Reserved + * 29 2 ErrIrq + * 30 1 DlyIrq + * 31 0 CoalIrq */ #define TX_CHNL_STS 0x07 /* r */ /* - 0:9 22:31 Reserved - 10 21 TailPErr - 11 20 CmpErr - 12 19 AddrErr - 13 18 NxtPErr - 14 17 CurPErr - 15 16 BsyWr - 16:23 8:15 Reserved - 24 7 Error - 25 6 IOE - 26 5 SOE - 27 4 Cmplt - 28 3 SOP - 29 2 EOP - 30 1 EngBusy - 31 0 Reserved -*/ + * 0:9 22:31 Reserved + * 10 21 TailPErr + * 11 20 CmpErr + * 12 19 AddrErr + * 13 18 NxtPErr + * 14 17 CurPErr + * 15 16 BsyWr + * 16:23 8:15 Reserved + * 24 7 Error + * 25 6 IOE + * 26 5 SOE + * 27 4 Cmplt + * 28 3 SOP + * 29 2 EOP + * 30 1 EngBusy + * 31 0 Reserved + */ #define RX_NXTDESC_PTR 0x08 /* r */ #define RX_CURBUF_ADDR 0x09 /* r */ @@ -123,17 +134,17 @@ This option defaults to enabled (set) */ #define RX_TAILDESC_PTR 0x0c /* rw */ #define RX_CHNL_CTRL 0x0d /* rw */ /* - 0:7 24:31 IRQTimeout - 8:15 16:23 IRQCount - 16:20 11:15 Reserved - 21 10 0 - 22 9 UseIntOnEnd - 23 8 LdIRQCnt - 24 7 IRQEn - 25:28 3:6 Reserved - 29 2 IrqErrEn - 30 1 IrqDlyEn - 31 0 IrqCoalEn + * 0:7 24:31 IRQTimeout + * 8:15 16:23 IRQCount + * 16:20 11:15 Reserved + * 21 10 0 + * 22 9 UseIntOnEnd + * 23 8 LdIRQCnt + * 24 7 IRQEn + * 25:28 3:6 Reserved + * 29 2 IrqErrEn + * 30 1 IrqDlyEn + * 31 0 IrqCoalEn */ #define RX_IRQ_REG 0x0e /* rw */ #define IRQ_COAL (1 << 0) @@ -141,13 +152,13 @@ This option defaults to enabled (set) */ #define IRQ_ERR (1 << 2) #define IRQ_DMAERR (1 << 7) /* this is not documented ??? */ /* - 0:7 24:31 DltTmrValue - 8:15 16:23 ClscCntrValue - 16:17 14:15 Reserved - 18:21 10:13 ClscCnt - 22:23 8:9 DlyCnt - 24:28 3::7 Reserved -*/ + * 0:7 24:31 DltTmrValue + * 8:15 16:23 ClscCntrValue + * 16:17 14:15 Reserved + * 18:21 10:13 ClscCnt + * 22:23 8:9 DlyCnt + * 24:28 3::7 Reserved + */ #define RX_CHNL_STS 0x0f /* r */ #define CHNL_STS_ENGBUSY (1 << 1) #define CHNL_STS_EOP (1 << 2) @@ -164,23 +175,23 @@ This option defaults to enabled (set) */ #define CHNL_STS_CMPERR (1 << 20) #define CHNL_STS_TAILERR (1 << 21) /* - 0:9 22:31 Reserved - 10 21 TailPErr - 11 20 CmpErr - 12 19 AddrErr - 13 18 NxtPErr - 14 17 CurPErr - 15 16 BsyWr - 16:23 8:15 Reserved - 24 7 Error - 25 6 IOE - 26 5 SOE - 27 4 Cmplt - 28 3 SOP - 29 2 EOP - 30 1 EngBusy - 31 0 Reserved -*/ + * 0:9 22:31 Reserved + * 10 21 TailPErr + * 11 20 CmpErr + * 12 19 AddrErr + * 13 18 NxtPErr + * 14 17 CurPErr + * 15 16 BsyWr + * 16:23 8:15 Reserved + * 24 7 Error + * 25 6 IOE + * 26 5 SOE + * 27 4 Cmplt + * 28 3 SOP + * 29 2 EOP + * 30 1 EngBusy + * 31 0 Reserved + */ #define DMA_CONTROL_REG 0x10 /* rw */ #define DMA_CONTROL_RST (1 << 0) @@ -270,7 +281,7 @@ This option defaults to enabled (set) */ #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */ -/** MII Mamagement Control register (MGTCR) */ +/* MII Management Control register (MGTCR) */ #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */ #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */ @@ -282,7 +293,7 @@ This option defaults to enabled (set) */ #define STS_CTRL_APP0_ERR (1 << 31) #define STS_CTRL_APP0_IRQONEND (1 << 30) -/* undoccumented */ +/* undocumented */ #define STS_CTRL_APP0_STOPONEND (1 << 29) #define STS_CTRL_APP0_CMPLT (1 << 28) #define STS_CTRL_APP0_SOP (1 << 27) @@ -333,6 +344,9 @@ struct temac_local { /* Connection to PHY device */ struct device_node *phy_node; + /* For non-device-tree devices */ + char phy_name[MII_BUS_ID_SIZE + 3]; + phy_interface_t phy_interface; /* MDIO bus data */ struct mii_bus *mii_bus; /* MII bus reference */ @@ -343,8 +357,10 @@ struct temac_local { #ifdef CONFIG_PPC_DCR dcr_host_t sdma_dcrs; #endif - u32 (*dma_in)(struct temac_local *, int); - void (*dma_out)(struct temac_local *, int, u32); + u32 (*temac_ior)(struct temac_local *lp, int offset); + void (*temac_iow)(struct temac_local *lp, int offset, u32 value); + u32 (*dma_in)(struct temac_local *lp, int reg); + void (*dma_out)(struct temac_local *lp, int reg, u32 value); int tx_irq; int rx_irq; @@ -352,7 +368,10 @@ struct temac_local { struct sk_buff **rx_skb; spinlock_t rx_lock; - struct mutex indirect_mutex; + /* For synchronization of indirect register access. Must be + * shared mutex between interfaces in same TEMAC block. + */ + spinlock_t *indirect_lock; u32 options; /* Current options word */ int last_link; unsigned int temac_features; @@ -360,24 +379,37 @@ struct temac_local { /* Buffer descriptors */ struct cdmac_bd *tx_bd_v; dma_addr_t tx_bd_p; + u32 tx_bd_num; struct cdmac_bd *rx_bd_v; dma_addr_t rx_bd_p; + u32 rx_bd_num; int tx_bd_ci; - int tx_bd_next; int tx_bd_tail; int rx_bd_ci; + int rx_bd_tail; + + /* DMA channel control setup */ + u8 coalesce_count_tx; + u8 coalesce_delay_tx; + u8 coalesce_count_rx; + u8 coalesce_delay_rx; + + struct delayed_work restart_work; }; +/* Wrappers for temac_ior()/temac_iow() function pointers above */ +#define temac_ior(lp, o) ((lp)->temac_ior(lp, o)) +#define temac_iow(lp, o, v) ((lp)->temac_iow(lp, o, v)) + /* xilinx_temac.c */ -u32 temac_ior(struct temac_local *lp, int offset); -void temac_iow(struct temac_local *lp, int offset, u32 value); int temac_indirect_busywait(struct temac_local *lp); u32 temac_indirect_in32(struct temac_local *lp, int reg); +u32 temac_indirect_in32_locked(struct temac_local *lp, int reg); void temac_indirect_out32(struct temac_local *lp, int reg, u32 value); - +void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value); /* xilinx_temac_mdio.c */ -int temac_mdio_setup(struct temac_local *lp, struct device_node *np); +int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev); void temac_mdio_teardown(struct temac_local *lp); #endif /* XILINX_LL_TEMAC_H */ |