diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_axienet.h')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 518 |
1 files changed, 378 insertions, 140 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 44b8d2bad8c3..5ff742103beb 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Definitions for Xilinx Axi Ethernet device driver. * @@ -8,55 +9,61 @@ #ifndef XILINX_AXIENET_H #define XILINX_AXIENET_H +#include <linux/dim.h> #include <linux/netdevice.h> #include <linux/spinlock.h> #include <linux/interrupt.h> +#include <linux/if_vlan.h> +#include <linux/phylink.h> +#include <linux/skbuff.h> /* Packet size info */ #define XAE_HDR_SIZE 14 /* Size of Ethernet header */ -#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */ #define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ #define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ #define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ #define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) -#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + VLAN_ETH_HLEN + XAE_TRL_SIZE) #define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) /* Configuration options */ /* Accept all incoming packets. Default: disabled (cleared) */ -#define XAE_OPTION_PROMISC (1 << 0) +#define XAE_OPTION_PROMISC BIT(0) /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ -#define XAE_OPTION_JUMBO (1 << 1) +#define XAE_OPTION_JUMBO BIT(1) /* VLAN Rx & Tx frame support. Default: disabled (cleared) */ -#define XAE_OPTION_VLAN (1 << 2) +#define XAE_OPTION_VLAN BIT(2) /* Enable recognition of flow control frames on Rx. Default: enabled (set) */ -#define XAE_OPTION_FLOW_CONTROL (1 << 4) +#define XAE_OPTION_FLOW_CONTROL BIT(4) /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not - * stripped. Default: disabled (set) */ -#define XAE_OPTION_FCS_STRIP (1 << 5) + * stripped. Default: disabled (set) + */ +#define XAE_OPTION_FCS_STRIP BIT(5) /* Generate FCS field and add PAD automatically for outgoing frames. - * Default: enabled (set) */ -#define XAE_OPTION_FCS_INSERT (1 << 6) + * Default: enabled (set) + */ +#define XAE_OPTION_FCS_INSERT BIT(6) /* Enable Length/Type error checking for incoming frames. When this option is * set, the MAC will filter frames that have a mismatched type/length field * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these * types of frames are encountered. When this option is cleared, the MAC will - * allow these types of frames to be received. Default: enabled (set) */ -#define XAE_OPTION_LENTYPE_ERR (1 << 7) + * allow these types of frames to be received. Default: enabled (set) + */ +#define XAE_OPTION_LENTYPE_ERR BIT(7) /* Enable the transmitter. Default: enabled (set) */ -#define XAE_OPTION_TXEN (1 << 11) +#define XAE_OPTION_TXEN BIT(11) /* Enable the receiver. Default: enabled (set) */ -#define XAE_OPTION_RXEN (1 << 12) +#define XAE_OPTION_RXEN BIT(12) /* Default options set when device is initialized or reset */ #define XAE_OPTION_DEFAULTS \ @@ -79,6 +86,8 @@ #define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ #define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ +#define XAXIDMA_SR_HALT_MASK 0x00000001 /* Indicates DMA channel halted */ + #define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ #define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ #define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ @@ -104,19 +113,18 @@ #define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ #define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ -#define XAXIDMA_DELAY_SHIFT 24 -#define XAXIDMA_COALESCE_SHIFT 16 - #define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ #define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ #define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ #define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ -/* Default TX/RX Threshold and waitbound values for SGDMA mode */ +/* Constant to convert delay counts to microseconds */ +#define XAXIDMA_DELAY_SCALE (125ULL * USEC_PER_SEC) + +/* Default TX/RX Threshold and delay timer values for SGDMA mode */ #define XAXIDMA_DFT_TX_THRESHOLD 24 -#define XAXIDMA_DFT_TX_WAITBOUND 254 -#define XAXIDMA_DFT_RX_THRESHOLD 24 -#define XAXIDMA_DFT_RX_WAITBOUND 254 +#define XAXIDMA_DFT_TX_USEC 50 +#define XAXIDMA_DFT_RX_USEC 16 #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ @@ -148,46 +156,44 @@ #define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ #define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ #define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ +#define XAE_STATS_OFFSET 0x00000200 /* Statistics counters */ #define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ #define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ #define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ #define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ -#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ -#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ -#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ -#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ -#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ -#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ -#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ -#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending - * register offset */ -#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable - * register offset */ -#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear - * register offset. */ +#define XAE_EMMC_OFFSET 0x00000410 /* MAC speed configuration */ +#define XAE_PHYC_OFFSET 0x00000414 /* RX Max Frame Configuration */ +#define XAE_ID_OFFSET 0x000004F8 /* Identification register */ +#define XAE_ABILITY_OFFSET 0x000004FC /* Ability Register offset */ +#define XAE_MDIO_MC_OFFSET 0x00000500 /* MDIO Setup */ +#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MDIO Control */ +#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MDIO Write Data */ +#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MDIO Read Data */ #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ -#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ +#define XAE_FMI_OFFSET 0x00000708 /* Frame Filter Control */ +#define XAE_FFE_OFFSET 0x0000070C /* Frame Filter Enable */ #define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ #define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ +#define XAE_AM0_OFFSET 0x00000750 /* Frame Filter Mask Value Bytes 3-0 */ +#define XAE_AM1_OFFSET 0x00000754 /* Frame Filter Mask Value Bytes 7-4 */ #define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ #define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ #define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ /* Bit Masks for Axi Ethernet RAF register */ -#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast - * destination address */ -#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast - * destination address */ +/* Reject receive multicast destination address */ +#define XAE_RAF_MCSTREJ_MASK 0x00000002 +/* Reject receive broadcast destination address */ +#define XAE_RAF_BCSTREJ_MASK 0x00000004 #define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ #define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ #define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ #define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ #define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ -#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast - * Filtering mode - */ +/* Extended Multicast Filtering mode */ +#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 #define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ #define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ #define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ @@ -197,15 +203,16 @@ /* Bit Masks for Axi Ethernet TPF and IFGP registers */ #define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ -#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame - * gap adjustment value */ +/* Transmit inter-frame gap adjustment value */ +#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply - * for all 3 registers. */ -#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access - * complete */ -#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation - * complete */ + * for all 3 registers. + */ +/* Hard register access complete */ +#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 +/* Auto negotiation complete */ +#define XAE_INT_AUTONEG_MASK 0x00000002 #define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ #define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ #define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ @@ -215,10 +222,9 @@ #define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ #define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ +/* INT bits that indicate receive errors */ #define XAE_INT_RECV_ERROR_MASK \ - (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that - * indicate receive - * errors */ + (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ #define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ @@ -231,27 +237,28 @@ /* Bit masks for Axi Ethernet RCW1 register */ #define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ #define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ -#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable - * (FCS not stripped) */ +/* In-Band FCS enable (FCS not stripped) */ +#define XAE_RCW1_FCS_MASK 0x20000000 #define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ #define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ -#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check - * disable */ -#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check - * disable */ -#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address - * bits [47:32]. Bits [31:0] are - * stored in register RCW0 */ +/* Length/type field valid check disable */ +#define XAE_RCW1_LT_DIS_MASK 0x02000000 +/* Control frame Length check disable */ +#define XAE_RCW1_CL_DIS_MASK 0x01000000 +/* Pause frame source address bits [47:32]. Bits [31:0] are + * stored in register RCW0 + */ +#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Bit masks for Axi Ethernet TC register */ #define XAE_TC_RST_MASK 0x80000000 /* Reset */ #define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ -#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable - * (FCS not generated) */ +/* In-Band FCS enable (FCS not generated) */ +#define XAE_TC_FCS_MASK 0x20000000 #define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ #define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ -#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment - * enable */ +/* Inter-frame gap adjustment enable */ +#define XAE_TC_IFG_MASK 0x02000000 /* Bit masks for Axi Ethernet FCC register */ #define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ @@ -281,6 +288,16 @@ #define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ #define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ +/* Bit masks for Axi Ethernet ability register */ +#define XAE_ABILITY_PFC BIT(16) +#define XAE_ABILITY_FRAME_FILTER BIT(10) +#define XAE_ABILITY_HALF_DUPLEX BIT(9) +#define XAE_ABILITY_STATS BIT(8) +#define XAE_ABILITY_2_5G BIT(3) +#define XAE_ABILITY_1G BIT(2) +#define XAE_ABILITY_100M BIT(1) +#define XAE_ABILITY_10M BIT(0) + /* Bit masks for Axi Ethernet MDIO interface MC register */ #define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ #define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ @@ -301,12 +318,12 @@ #define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ /* Bit masks for Axi Ethernet UAW1 register */ -#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits - * [47:32]; Station address - * bits [31:0] are stored in - * register UAW0 */ +/* Station address bits [47:32]; Station address + * bits [31:0] are stored in register UAW0 + */ +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF -/* Bit masks for Axi Ethernet FMI register */ +/* Bit masks for Axi Ethernet FMC register */ #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ #define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ @@ -320,14 +337,16 @@ #define XAE_PHY_TYPE_SGMII 4 #define XAE_PHY_TYPE_1000BASE_X 5 -#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the - * hardware multicast table. */ + /* Total number of entries in the hardware multicast table. */ +#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Axi Ethernet Synthesis features */ -#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) -#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) -#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) -#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) +#define XAE_FEATURE_PARTIAL_RX_CSUM BIT(0) +#define XAE_FEATURE_PARTIAL_TX_CSUM BIT(1) +#define XAE_FEATURE_FULL_RX_CSUM BIT(2) +#define XAE_FEATURE_FULL_TX_CSUM BIT(3) +#define XAE_FEATURE_DMA_64BIT BIT(4) +#define XAE_FEATURE_STATS BIT(5) #define XAE_NO_CSUM_OFFLOAD 0 @@ -337,12 +356,71 @@ #define DELAY_OF_ONE_MILLISEC 1000 +/* Xilinx PCS/PMA PHY register for switching 1000BaseX or SGMII */ +#define XLNX_MII_STD_SELECT_REG 0x11 +#define XLNX_MII_STD_SELECT_SGMII BIT(0) + +/* enum temac_stat - TEMAC statistics counters + * + * Index of statistics counters within the TEMAC. This must match the + * order/offset of hardware registers exactly. + */ +enum temac_stat { + STAT_RX_BYTES = 0, + STAT_TX_BYTES, + STAT_UNDERSIZE_FRAMES, + STAT_FRAGMENT_FRAMES, + STAT_RX_64_BYTE_FRAMES, + STAT_RX_65_127_BYTE_FRAMES, + STAT_RX_128_255_BYTE_FRAMES, + STAT_RX_256_511_BYTE_FRAMES, + STAT_RX_512_1023_BYTE_FRAMES, + STAT_RX_1024_MAX_BYTE_FRAMES, + STAT_RX_OVERSIZE_FRAMES, + STAT_TX_64_BYTE_FRAMES, + STAT_TX_65_127_BYTE_FRAMES, + STAT_TX_128_255_BYTE_FRAMES, + STAT_TX_256_511_BYTE_FRAMES, + STAT_TX_512_1023_BYTE_FRAMES, + STAT_TX_1024_MAX_BYTE_FRAMES, + STAT_TX_OVERSIZE_FRAMES, + STAT_RX_GOOD_FRAMES, + STAT_RX_FCS_ERRORS, + STAT_RX_BROADCAST_FRAMES, + STAT_RX_MULTICAST_FRAMES, + STAT_RX_CONTROL_FRAMES, + STAT_RX_LENGTH_ERRORS, + STAT_RX_VLAN_FRAMES, + STAT_RX_PAUSE_FRAMES, + STAT_RX_CONTROL_OPCODE_ERRORS, + STAT_TX_GOOD_FRAMES, + STAT_TX_BROADCAST_FRAMES, + STAT_TX_MULTICAST_FRAMES, + STAT_TX_UNDERRUN_ERRORS, + STAT_TX_CONTROL_FRAMES, + STAT_TX_VLAN_FRAMES, + STAT_TX_PAUSE_FRAMES, + STAT_TX_SINGLE_COLLISION_FRAMES, + STAT_TX_MULTIPLE_COLLISION_FRAMES, + STAT_TX_DEFERRED_FRAMES, + STAT_TX_LATE_COLLISIONS, + STAT_TX_EXCESS_COLLISIONS, + STAT_TX_EXCESS_DEFERRAL, + STAT_RX_ALIGNMENT_ERRORS, + STAT_TX_PFC_FRAMES, + STAT_RX_PFC_FRAMES, + STAT_USER_DEFINED0, + STAT_USER_DEFINED1, + STAT_USER_DEFINED2, + STAT_COUNT, +}; + /** * struct axidma_bd - Axi Dma buffer descriptor layout * @next: MM2S/S2MM Next Descriptor Pointer - * @reserved1: Reserved and not used + * @next_msb: MM2S/S2MM Next Descriptor Pointer (high 32 bits) * @phys: MM2S/S2MM Buffer Address - * @reserved2: Reserved and not used + * @phys_msb: MM2S/S2MM Buffer Address (high 32 bits) * @reserved3: Reserved and not used * @reserved4: Reserved and not used * @cntrl: MM2S/S2MM Control value @@ -352,15 +430,13 @@ * @app2: MM2S/S2MM User Application Field 2. * @app3: MM2S/S2MM User Application Field 3. * @app4: MM2S/S2MM User Application Field 4. - * @sw_id_offset: MM2S/S2MM Sw ID - * @reserved5: Reserved and not used - * @reserved6: Reserved and not used + * @skb: Pointer to SKB transferred using DMA */ struct axidma_bd { u32 next; /* Physical address of next buffer descriptor */ - u32 reserved1; + u32 next_msb; /* high 32 bits for IP >= v7.1, reserved on older IP */ u32 phys; - u32 reserved2; + u32 phys_msb; /* for IP >= v7.1, reserved for older IP */ u32 reserved3; u32 reserved4; u32 cntrl; @@ -369,96 +445,191 @@ struct axidma_bd { u32 app1; /* TX start << 16 | insert */ u32 app2; /* TX csum seed */ u32 app3; - u32 app4; - u32 sw_id_offset; - u32 reserved5; - u32 reserved6; + u32 app4; /* Last field used by HW */ + struct sk_buff *skb; +} __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT); + +#define XAE_NUM_MISC_CLOCKS 3 + +/** + * struct skbuf_dma_descriptor - skb for each dma descriptor + * @sgl: Pointer for sglist. + * @desc: Pointer to dma descriptor. + * @dma_address: dma address of sglist. + * @skb: Pointer to SKB transferred using DMA + * @sg_len: number of entries in the sglist. + */ +struct skbuf_dma_descriptor { + struct scatterlist sgl[MAX_SKB_FRAGS + 1]; + struct dma_async_tx_descriptor *desc; + dma_addr_t dma_address; + struct sk_buff *skb; + int sg_len; }; /** * struct axienet_local - axienet private per device data * @ndev: Pointer for net_device to which it will be attached. * @dev: Pointer to device structure - * @phy_dev: Pointer to PHY device structure attached to the axienet_local - * @phy_node: Pointer to device node structure + * @phylink: Pointer to phylink instance + * @phylink_config: phylink configuration settings + * @pcs_phy: Reference to PCS/PMA PHY if used + * @pcs: phylink pcs structure for PCS PHY + * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core + * @axi_clk: AXI4-Lite bus clock + * @misc_clks: Misc ethernet clocks (AXI4-Stream, Ref, MGT clocks) * @mii_bus: Pointer to MII bus structure - * @mdio_irqs: IRQs table for MDIO bus required in mii_bus structure + * @mii_clk_div: MII bus clock divider value + * @regs_start: Resource start for axienet device addresses * @regs: Base address for the axienet_local device address space * @dma_regs: Base address for the axidma device address space - * @dma_err_tasklet: Tasklet structure to process Axi DMA errors - * @tx_irq: Axidma TX IRQ number - * @rx_irq: Axidma RX IRQ number - * @temac_type: axienet type to identify between soft and hard temac - * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X - * @options: AxiEthernet option word - * @last_link: Phy link state in which the PHY was negotiated earlier - * @features: Stores the extended features supported by the axienet hw - * @tx_bd_v: Virtual address of the TX buffer descriptor ring - * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @napi_rx: NAPI RX control structure + * @rx_dim: DIM state for the receive queue + * @rx_dim_enabled: Whether DIM is enabled or not + * @rx_irqs: Number of interrupts + * @rx_cr_lock: Lock protecting @rx_dma_cr, its register, and @rx_dma_started + * @rx_dma_cr: Nominal content of RX DMA control register + * @rx_dma_started: Set when RX DMA is started * @rx_bd_v: Virtual address of the RX buffer descriptor ring * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring - * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being - * accessed currently. Used while alloc. BDs before a TX starts - * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being - * accessed currently. Used while processing BDs after the TX - * completed. + * @rx_bd_num: Size of RX buffer descriptor ring * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being * accessed currently. + * @rx_packets: RX packet count for statistics + * @rx_bytes: RX byte count for statistics + * @rx_stat_sync: Synchronization object for RX stats + * @napi_tx: NAPI TX control structure + * @tx_cr_lock: Lock protecting @tx_dma_cr, its register, and @tx_dma_started + * @tx_dma_cr: Nominal content of TX DMA control register + * @tx_dma_started: Set when TX DMA is started + * @tx_bd_v: Virtual address of the TX buffer descriptor ring + * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @tx_bd_num: Size of TX buffer descriptor ring + * @tx_bd_ci: Stores the next Tx buffer descriptor in the ring that may be + * complete. Only updated at runtime by TX NAPI poll. + * @tx_bd_tail: Stores the index of the next Tx buffer descriptor in the ring + * to be populated. + * @tx_packets: TX packet count for statistics + * @tx_bytes: TX byte count for statistics + * @tx_stat_sync: Synchronization object for TX stats + * @hw_stat_base: Base offset for statistics counters. This may be nonzero if + * the statistics counteres were reset or wrapped around. + * @hw_last_counter: Last-seen value of each statistic counter + * @reset_in_progress: Set while we are performing a reset and statistics + * counters may be invalid + * @hw_stats_seqcount: Sequence counter for @hw_stat_base, @hw_last_counter, + * and @reset_in_progress. + * @stats_lock: Lock for @hw_stats_seqcount + * @stats_work: Work for reading the hardware statistics counters often enough + * to catch overflows. + * @dma_err_task: Work structure to process Axi DMA errors + * @stopping: Set when @dma_err_task shouldn't do anything because we are + * about to stop the device. + * @tx_irq: Axidma TX IRQ number + * @rx_irq: Axidma RX IRQ number + * @eth_irq: Ethernet core IRQ number + * @phy_mode: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X + * @options: AxiEthernet option word + * @features: Stores the extended features supported by the axienet hw * @max_frm_size: Stores the maximum size of the frame that can be that * Txed/Rxed in the existing hardware. If jumbo option is * supported, the maximum frame size would be 9k. Else it is * 1522 bytes (assuming support for basic VLAN) - * @jumbo_support: Stores hardware configuration for jumbo support. If hardware - * can handle jumbo packets, this entry will be 1, else 0. + * @rxmem: Stores rx memory size for jumbo frame handling. + * @use_dmaengine: flag to check dmaengine framework usage. + * @tx_chan: TX DMA channel. + * @rx_chan: RX DMA channel. + * @tx_skb_ring: Pointer to TX skb ring buffer array. + * @rx_skb_ring: Pointer to RX skb ring buffer array. + * @tx_ring_head: TX skb ring buffer head index. + * @tx_ring_tail: TX skb ring buffer tail index. + * @rx_ring_head: RX skb ring buffer head index. + * @rx_ring_tail: RX skb ring buffer tail index. */ struct axienet_local { struct net_device *ndev; struct device *dev; - /* Connection to PHY device */ - struct phy_device *phy_dev; /* Pointer to PHY device */ - struct device_node *phy_node; + struct phylink *phylink; + struct phylink_config phylink_config; - /* MDIO bus data */ - struct mii_bus *mii_bus; /* MII bus reference */ - int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + struct mdio_device *pcs_phy; + struct phylink_pcs pcs; - /* IO registers, dma functions and IRQs */ - void __iomem *regs; - void __iomem *dma_regs; + bool switch_x_sgmii; - struct tasklet_struct dma_err_tasklet; + struct clk *axi_clk; + struct clk_bulk_data misc_clks[XAE_NUM_MISC_CLOCKS]; - int tx_irq; - int rx_irq; - u32 temac_type; - u32 phy_type; + struct mii_bus *mii_bus; + u8 mii_clk_div; - u32 options; /* Current options word */ - u32 last_link; - u32 features; + resource_size_t regs_start; + void __iomem *regs; + void __iomem *dma_regs; - /* Buffer descriptors */ - struct axidma_bd *tx_bd_v; - dma_addr_t tx_bd_p; + struct napi_struct napi_rx; + struct dim rx_dim; + bool rx_dim_enabled; + u16 rx_irqs; + spinlock_t rx_cr_lock; + u32 rx_dma_cr; + bool rx_dma_started; struct axidma_bd *rx_bd_v; dma_addr_t rx_bd_p; + u32 rx_bd_num; + u32 rx_bd_ci; + u64_stats_t rx_packets; + u64_stats_t rx_bytes; + struct u64_stats_sync rx_stat_sync; + + struct napi_struct napi_tx; + spinlock_t tx_cr_lock; + u32 tx_dma_cr; + bool tx_dma_started; + struct axidma_bd *tx_bd_v; + dma_addr_t tx_bd_p; + u32 tx_bd_num; u32 tx_bd_ci; u32 tx_bd_tail; - u32 rx_bd_ci; + u64_stats_t tx_packets; + u64_stats_t tx_bytes; + struct u64_stats_sync tx_stat_sync; - u32 max_frm_size; - u32 jumbo_support; + u64 hw_stat_base[STAT_COUNT]; + u32 hw_last_counter[STAT_COUNT]; + seqcount_mutex_t hw_stats_seqcount; + struct mutex stats_lock; + struct delayed_work stats_work; + bool reset_in_progress; - int csum_offload_on_tx_path; - int csum_offload_on_rx_path; + struct work_struct dma_err_task; + bool stopping; + + int tx_irq; + int rx_irq; + int eth_irq; + phy_interface_t phy_mode; - u32 coalesce_count_rx; - u32 coalesce_count_tx; + u32 options; + u32 features; + + u32 max_frm_size; + u32 rxmem; + + u8 use_dmaengine; + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; + struct skbuf_dma_descriptor **tx_skb_ring; + struct skbuf_dma_descriptor **rx_skb_ring; + int tx_ring_head; + int tx_ring_tail; + int rx_ring_head; + int rx_ring_tail; }; /** - * struct axiethernet_option - Used to set axi ethernet hardware options + * struct axienet_option - Used to set axi ethernet hardware options * @opt: Option to be set. * @reg: Register offset to be written for setting the option * @m_or: Mask to be ORed for setting the option in the register @@ -474,13 +645,30 @@ struct axienet_option { * @lp: Pointer to axienet local structure * @offset: Address offset from the base address of Axi Ethernet core * - * returns: The contents of the Axi Ethernet register + * Return: The contents of the Axi Ethernet register * * This function returns the contents of the corresponding register. */ static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) { - return in_be32(lp->regs + offset); + return ioread32(lp->regs + offset); +} + +static inline u32 axinet_ior_read_mcr(struct axienet_local *lp) +{ + return axienet_ior(lp, XAE_MDIO_MCR_OFFSET); +} + +static inline void axienet_lock_mii(struct axienet_local *lp) +{ + if (lp->mii_bus) + mutex_lock(&lp->mii_bus->mdio_lock); +} + +static inline void axienet_unlock_mii(struct axienet_local *lp) +{ + if (lp->mii_bus) + mutex_unlock(&lp->mii_bus->mdio_lock); } /** @@ -495,12 +683,62 @@ static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) static inline void axienet_iow(struct axienet_local *lp, off_t offset, u32 value) { - out_be32((lp->regs + offset), value); + iowrite32(value, lp->regs + offset); } +/** + * axienet_dma_out32 - Memory mapped Axi DMA register write. + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * @value: Value to be written into the Axi DMA register + * + * This function writes the desired value into the corresponding Axi DMA + * register. + */ + +static inline void axienet_dma_out32(struct axienet_local *lp, + off_t reg, u32 value) +{ + iowrite32(value, lp->dma_regs + reg); +} + +#if defined(CONFIG_64BIT) && defined(iowrite64) +/** + * axienet_dma_out64 - Memory mapped Axi DMA register write. + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * @value: Value to be written into the Axi DMA register + * + * This function writes the desired value into the corresponding Axi DMA + * register. + */ +static inline void axienet_dma_out64(struct axienet_local *lp, + off_t reg, u64 value) +{ + iowrite64(value, lp->dma_regs + reg); +} + +static inline void axienet_dma_out_addr(struct axienet_local *lp, off_t reg, + dma_addr_t addr) +{ + if (lp->features & XAE_FEATURE_DMA_64BIT) + axienet_dma_out64(lp, reg, addr); + else + axienet_dma_out32(lp, reg, lower_32_bits(addr)); +} + +#else /* CONFIG_64BIT */ + +static inline void axienet_dma_out_addr(struct axienet_local *lp, off_t reg, + dma_addr_t addr) +{ + axienet_dma_out32(lp, reg, lower_32_bits(addr)); +} + +#endif /* CONFIG_64BIT */ + /* Function prototypes visible in xilinx_axienet_mdio.c for other files */ -int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); -int axienet_mdio_wait_until_ready(struct axienet_local *lp); +int axienet_mdio_setup(struct axienet_local *lp); void axienet_mdio_teardown(struct axienet_local *lp); #endif /* XILINX_AXI_ENET_H */ |