diff options
Diffstat (limited to 'drivers/net/phy/Kconfig')
| -rw-r--r-- | drivers/net/phy/Kconfig | 92 |
1 files changed, 60 insertions, 32 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 7fddc8306d82..a7ade7b95a2e 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -3,9 +3,13 @@ # PHY Layer Configuration # +config MDIO_BUS + tristate "MDIO bus consumer layer" + help + MDIO bus consumer layer + config PHYLINK tristate - depends on NETDEVICES select PHYLIB select SWPHY help @@ -15,9 +19,7 @@ config PHYLINK menuconfig PHYLIB tristate "PHY Device support and infrastructure" - depends on NETDEVICES - select MDIO_DEVICE - select MDIO_DEVRES + select MDIO_BUS help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for @@ -28,6 +30,9 @@ if PHYLIB config SWPHY bool +config PHY_PACKAGE + tristate + config LED_TRIGGER_PHY bool "Support LED triggers for tracking link state" depends on LEDS_TRIGGERS @@ -44,6 +49,9 @@ config LED_TRIGGER_PHY <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link for any speed known to the PHY. +config OPEN_ALLIANCE_HELPERS + bool + config PHYLIB_LEDS def_bool OF depends on LEDS_CLASS=y || LEDS_CLASS=PHYLIB @@ -76,6 +84,18 @@ config SFP comment "MII PHY device drivers" +config AS21XXX_PHY + tristate "Aeonsemi AS21xxx PHYs" + help + Currently supports the Aeonsemi AS21xxx PHY. + + These are C45 PHYs 10G that require all a generic firmware. + + Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1, + AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1, + AS21210PB1 that all register with the PHY ID 0x7500 0x7500 + before the firmware is loaded. + config AIR_EN8811H_PHY tristate "Airoha EN8811H 2.5 Gigabit PHY" help @@ -109,6 +129,13 @@ config ADIN1100_PHY Currently supports the: - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY +config AMCC_QT2025_PHY + tristate "AMCC QT2025 PHY" + depends on RUST_PHYLIB_ABSTRACTIONS + depends on RUST_FW_LOADER_ABSTRACTIONS + help + Adds support for the Applied Micro Circuits Corporation QT2025 PHY. + source "drivers/net/phy/aquantia/Kconfig" config AX88796B_PHY @@ -138,6 +165,7 @@ config BCM54140_PHY tristate "Broadcom BCM54140 PHY" depends on HWMON || HWMON=n select BCM_NET_PHYLIB + select PHY_PACKAGE help Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. @@ -256,34 +284,32 @@ config MAXLINEAR_GPHY Support for the Maxlinear GPY115, GPY211, GPY212, GPY215, GPY241, GPY245 PHYs. -config MEDIATEK_GE_PHY - tristate "MediaTek Gigabit Ethernet PHYs" - help - Supports the MediaTek Gigabit Ethernet PHYs. - -config MEDIATEK_GE_SOC_PHY - tristate "MediaTek SoC Ethernet PHYs" - depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST - depends on NVMEM_MTK_EFUSE +config MAXLINEAR_86110_PHY + tristate "MaxLinear MXL86110 PHY support" help - Supports MediaTek SoC built-in Gigabit Ethernet PHYs. + Support for the MaxLinear MXL86110 Gigabit Ethernet + Physical Layer transceiver. + The MXL86110 is commonly used in networking equipment such as + routers, switches, and embedded systems, providing the + physical interface for 10/100/1000 Mbps Ethernet connections + over copper media. + If you are using a board with the MXL86110 PHY connected to your + Ethernet MAC, you should enable this option. - Include support for built-in Ethernet PHYs which are present in - the MT7981 and MT7988 SoCs. These PHYs need calibration data - present in the SoCs efuse and will dynamically calibrate VCM - (common-mode voltage) during startup. +source "drivers/net/phy/mediatek/Kconfig" config MICREL_PHY tristate "Micrel PHYs" depends on PTP_1588_CLOCK_OPTIONAL + select PHY_PACKAGE help - Supports the KSZ9021, VSC8201, KS8001 PHYs. + Supports the KSZ8xxx, KSZ9xxx, and LAN88xx families of Micrel/Microchip PHYs. config MICROCHIP_T1S_PHY tristate "Microchip 10BASE-T1S Ethernet PHYs" help - Currently supports the LAN8670/1/2 Rev.B1 and LAN8650/1 Rev.B0 Internal - PHYs. + Currently supports the LAN8670/1/2 Rev.B1/C1/C2/D0 and + LAN8650/1 Rev.B0/B1 Internal PHYs. config MICROCHIP_PHY tristate "Microchip PHYs" @@ -292,14 +318,22 @@ config MICROCHIP_PHY config MICROCHIP_T1_PHY tristate "Microchip T1 PHYs" + select MICROCHIP_PHY_RDS_PTP if NETWORK_PHY_TIMESTAMPING + depends on PTP_1588_CLOCK_OPTIONAL help - Supports the LAN87XX PHYs. + Supports the LAN8XXX PHYs. + +config MICROCHIP_PHY_RDS_PTP + tristate + help + Currently supports LAN887X T1 PHY config MICROSEMI_PHY tristate "Microsemi PHYs" depends on MACSEC || MACSEC=n depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING select CRYPTO_LIB_AES if MACSEC + select PHY_PACKAGE help Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs @@ -326,13 +360,13 @@ config NXP_C45_TJA11XX_PHY depends on MACSEC || !MACSEC help Enable support for NXP C45 TJA11XX PHYs. - Currently supports the TJA1103, TJA1104 and TJA1120 PHYs. + Currently supports the TJA1103, TJA1104, TJA1120 and TJA1121 PHYs. config NXP_TJA11XX_PHY tristate "NXP TJA11xx PHYs support" depends on HWMON help - Currently supports the NXP TJA1100 and TJA1101 PHY. + Currently supports the NXP TJA1100, TJA1101 and TJA1102 PHYs. config NCN26000_PHY tristate "Onsemi 10BASE-T1S Ethernet PHY" @@ -348,10 +382,7 @@ config QSEMI_PHY help Currently supports the qs6612 -config REALTEK_PHY - tristate "Realtek PHYs" - help - Supports the Realtek 821x PHY. +source "drivers/net/phy/realtek/Kconfig" config RENESAS_PHY tristate "Renesas PHYs" @@ -414,6 +445,7 @@ config DP83TD510_PHY config DP83TG720_PHY tristate "Texas Instruments DP83TG720 Ethernet 1000Base-T1 PHY" + select OPEN_ALLIANCE_HELPERS help The DP83TG720S-Q1 is an automotive Ethernet physical layer transceiver compliant with IEEE 802.3bp and Open Alliance @@ -438,7 +470,3 @@ config XILINX_GMII2RGMII Ethernet physical media devices and the Gigabit Ethernet controller. endif # PHYLIB - -config MICREL_KS8995MA - tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" - depends on SPI |