diff options
Diffstat (limited to 'drivers/net/phy/mdio-open-alliance.h')
| -rw-r--r-- | drivers/net/phy/mdio-open-alliance.h | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/drivers/net/phy/mdio-open-alliance.h b/drivers/net/phy/mdio-open-alliance.h new file mode 100644 index 000000000000..449d0fb67093 --- /dev/null +++ b/drivers/net/phy/mdio-open-alliance.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mdio-open-alliance.h - definition of OPEN Alliance SIG standard registers + */ + +#ifndef __MDIO_OPEN_ALLIANCE__ +#define __MDIO_OPEN_ALLIANCE__ + +#include <linux/mdio.h> + +/* NOTE: all OATC14 registers are located in MDIO_MMD_VEND2 */ + +/* Open Alliance TC14 (10BASE-T1S) registers */ +#define MDIO_OATC14_PLCA_IDVER 0xca00 /* PLCA ID and version */ +#define MDIO_OATC14_PLCA_CTRL0 0xca01 /* PLCA Control register 0 */ +#define MDIO_OATC14_PLCA_CTRL1 0xca02 /* PLCA Control register 1 */ +#define MDIO_OATC14_PLCA_STATUS 0xca03 /* PLCA Status register */ +#define MDIO_OATC14_PLCA_TOTMR 0xca04 /* PLCA TO Timer register */ +#define MDIO_OATC14_PLCA_BURST 0xca05 /* PLCA BURST mode register */ + +/* Open Alliance TC14 PLCA IDVER register */ +#define MDIO_OATC14_PLCA_IDM 0xff00 /* PLCA MAP ID */ +#define MDIO_OATC14_PLCA_VER 0x00ff /* PLCA MAP version */ + +/* Open Alliance TC14 PLCA CTRL0 register */ +#define MDIO_OATC14_PLCA_EN BIT(15) /* PLCA enable */ +#define MDIO_OATC14_PLCA_RST BIT(14) /* PLCA reset */ + +/* Open Alliance TC14 PLCA CTRL1 register */ +#define MDIO_OATC14_PLCA_NCNT 0xff00 /* PLCA node count */ +#define MDIO_OATC14_PLCA_ID 0x00ff /* PLCA local node ID */ + +/* Open Alliance TC14 PLCA STATUS register */ +#define MDIO_OATC14_PLCA_PST BIT(15) /* PLCA status indication */ + +/* Open Alliance TC14 PLCA TOTMR register */ +#define MDIO_OATC14_PLCA_TOT 0x00ff + +/* Open Alliance TC14 PLCA BURST register */ +#define MDIO_OATC14_PLCA_MAXBC 0xff00 +#define MDIO_OATC14_PLCA_BTMR 0x00ff + +/* Version Identifiers */ +#define OATC14_IDM 0x0a00 + +/* + * Open Alliance TC14 (10BASE-T1S) - Advanced Diagnostic Features Registers + * + * Refer to the OPEN Alliance documentation: + * https://opensig.org/automotive-ethernet-specifications/ + * + * Specification: + * "10BASE-T1S Advanced Diagnostic PHY Features" + * https://opensig.org/wp-content/uploads/2025/06/OPEN_Alliance_10BASE-T1S_Advanced_PHY_features_for-automotive_Ethernet_V2.1b.pdf + */ +/* Advanced Diagnostic Features Capability Register*/ +#define MDIO_OATC14_ADFCAP 0xcc00 +#define OATC14_ADFCAP_HDD_CAPABILITY GENMASK(10, 8) +#define OATC14_ADFCAP_SQIPLUS_CAPABILITY GENMASK(4, 1) +#define OATC14_ADFCAP_SQI_CAPABILITY BIT(0) + +/* Harness Defect Detection Register */ +#define MDIO_OATC14_HDD 0xcc01 +#define OATC14_HDD_CONTROL BIT(15) +#define OATC14_HDD_READY BIT(14) +#define OATC14_HDD_START_CONTROL BIT(13) +#define OATC14_HDD_VALID BIT(2) +#define OATC14_HDD_SHORT_OPEN_STATUS GENMASK(1, 0) + +/* Dynamic Channel Quality SQI Register */ +#define MDIO_OATC14_DCQ_SQI 0xcc03 +#define OATC14_DCQ_SQI_VALUE GENMASK(2, 0) + +/* Dynamic Channel Quality SQI Plus Register */ +#define MDIO_OATC14_DCQ_SQIPLUS 0xcc04 +#define OATC14_DCQ_SQIPLUS_VALUE GENMASK(7, 0) + +/* SQI is supported using 3 bits means 8 levels (0-7) */ +#define OATC14_SQI_MAX_LEVEL 7 + +/* Bus Short/Open Status: + * 0 0 - no fault; everything is ok. (Default) + * 0 1 - detected as an open or missing termination(s) + * 1 0 - detected as a short or extra termination(s) + * 1 1 - fault but fault type not detectable. More details can be available by + * vender specific register if supported. + */ +enum oatc14_hdd_status { + OATC14_HDD_STATUS_CABLE_OK = 0, + OATC14_HDD_STATUS_OPEN, + OATC14_HDD_STATUS_SHORT, + OATC14_HDD_STATUS_NOT_DETECTABLE, +}; + +#endif /* __MDIO_OPEN_ALLIANCE__ */ |